Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
4 *
5 * Copyright (c) 2003 Patrick Mochel
6 * Copyright (c) 2003 Open Source Development Lab
7 * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
8 * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
9 * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com>
10 */
11
12#define pr_fmt(fmt) "PM: " fmt
13
14#include <linux/export.h>
15#include <linux/suspend.h>
16#include <linux/reboot.h>
17#include <linux/string.h>
18#include <linux/device.h>
19#include <linux/async.h>
20#include <linux/delay.h>
21#include <linux/fs.h>
22#include <linux/mount.h>
23#include <linux/pm.h>
24#include <linux/nmi.h>
25#include <linux/console.h>
26#include <linux/cpu.h>
27#include <linux/freezer.h>
28#include <linux/gfp.h>
29#include <linux/syscore_ops.h>
30#include <linux/ctype.h>
31#include <linux/genhd.h>
32#include <linux/ktime.h>
33#include <linux/security.h>
34#include <trace/events/power.h>
35
36#include "power.h"
37
38
39static int nocompress;
40static int noresume;
41static int nohibernate;
42static int resume_wait;
43static unsigned int resume_delay;
44static char resume_file[256] = CONFIG_PM_STD_PARTITION;
45dev_t swsusp_resume_device;
46sector_t swsusp_resume_block;
47__visible int in_suspend __nosavedata;
48
49enum {
50 HIBERNATION_INVALID,
51 HIBERNATION_PLATFORM,
52 HIBERNATION_SHUTDOWN,
53 HIBERNATION_REBOOT,
54#ifdef CONFIG_SUSPEND
55 HIBERNATION_SUSPEND,
56#endif
57 HIBERNATION_TEST_RESUME,
58 /* keep last */
59 __HIBERNATION_AFTER_LAST
60};
61#define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
62#define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
63
64static int hibernation_mode = HIBERNATION_SHUTDOWN;
65
66bool freezer_test_done;
67
68static const struct platform_hibernation_ops *hibernation_ops;
69
70bool hibernation_available(void)
71{
72 return nohibernate == 0 && !security_locked_down(LOCKDOWN_HIBERNATION);
73}
74
75/**
76 * hibernation_set_ops - Set the global hibernate operations.
77 * @ops: Hibernation operations to use in subsequent hibernation transitions.
78 */
79void hibernation_set_ops(const struct platform_hibernation_ops *ops)
80{
81 if (ops && !(ops->begin && ops->end && ops->pre_snapshot
82 && ops->prepare && ops->finish && ops->enter && ops->pre_restore
83 && ops->restore_cleanup && ops->leave)) {
84 WARN_ON(1);
85 return;
86 }
87 lock_system_sleep();
88 hibernation_ops = ops;
89 if (ops)
90 hibernation_mode = HIBERNATION_PLATFORM;
91 else if (hibernation_mode == HIBERNATION_PLATFORM)
92 hibernation_mode = HIBERNATION_SHUTDOWN;
93
94 unlock_system_sleep();
95}
96EXPORT_SYMBOL_GPL(hibernation_set_ops);
97
98static bool entering_platform_hibernation;
99
100bool system_entering_hibernation(void)
101{
102 return entering_platform_hibernation;
103}
104EXPORT_SYMBOL(system_entering_hibernation);
105
106#ifdef CONFIG_PM_DEBUG
107static void hibernation_debug_sleep(void)
108{
109 pr_info("hibernation debug: Waiting for 5 seconds.\n");
110 mdelay(5000);
111}
112
113static int hibernation_test(int level)
114{
115 if (pm_test_level == level) {
116 hibernation_debug_sleep();
117 return 1;
118 }
119 return 0;
120}
121#else /* !CONFIG_PM_DEBUG */
122static int hibernation_test(int level) { return 0; }
123#endif /* !CONFIG_PM_DEBUG */
124
125/**
126 * platform_begin - Call platform to start hibernation.
127 * @platform_mode: Whether or not to use the platform driver.
128 */
129static int platform_begin(int platform_mode)
130{
131 return (platform_mode && hibernation_ops) ?
132 hibernation_ops->begin(PMSG_FREEZE) : 0;
133}
134
135/**
136 * platform_end - Call platform to finish transition to the working state.
137 * @platform_mode: Whether or not to use the platform driver.
138 */
139static void platform_end(int platform_mode)
140{
141 if (platform_mode && hibernation_ops)
142 hibernation_ops->end();
143}
144
145/**
146 * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
147 * @platform_mode: Whether or not to use the platform driver.
148 *
149 * Use the platform driver to prepare the system for creating a hibernate image,
150 * if so configured, and return an error code if that fails.
151 */
152
153static int platform_pre_snapshot(int platform_mode)
154{
155 return (platform_mode && hibernation_ops) ?
156 hibernation_ops->pre_snapshot() : 0;
157}
158
159/**
160 * platform_leave - Call platform to prepare a transition to the working state.
161 * @platform_mode: Whether or not to use the platform driver.
162 *
163 * Use the platform driver prepare to prepare the machine for switching to the
164 * normal mode of operation.
165 *
166 * This routine is called on one CPU with interrupts disabled.
167 */
168static void platform_leave(int platform_mode)
169{
170 if (platform_mode && hibernation_ops)
171 hibernation_ops->leave();
172}
173
174/**
175 * platform_finish - Call platform to switch the system to the working state.
176 * @platform_mode: Whether or not to use the platform driver.
177 *
178 * Use the platform driver to switch the machine to the normal mode of
179 * operation.
180 *
181 * This routine must be called after platform_prepare().
182 */
183static void platform_finish(int platform_mode)
184{
185 if (platform_mode && hibernation_ops)
186 hibernation_ops->finish();
187}
188
189/**
190 * platform_pre_restore - Prepare for hibernate image restoration.
191 * @platform_mode: Whether or not to use the platform driver.
192 *
193 * Use the platform driver to prepare the system for resume from a hibernation
194 * image.
195 *
196 * If the restore fails after this function has been called,
197 * platform_restore_cleanup() must be called.
198 */
199static int platform_pre_restore(int platform_mode)
200{
201 return (platform_mode && hibernation_ops) ?
202 hibernation_ops->pre_restore() : 0;
203}
204
205/**
206 * platform_restore_cleanup - Switch to the working state after failing restore.
207 * @platform_mode: Whether or not to use the platform driver.
208 *
209 * Use the platform driver to switch the system to the normal mode of operation
210 * after a failing restore.
211 *
212 * If platform_pre_restore() has been called before the failing restore, this
213 * function must be called too, regardless of the result of
214 * platform_pre_restore().
215 */
216static void platform_restore_cleanup(int platform_mode)
217{
218 if (platform_mode && hibernation_ops)
219 hibernation_ops->restore_cleanup();
220}
221
222/**
223 * platform_recover - Recover from a failure to suspend devices.
224 * @platform_mode: Whether or not to use the platform driver.
225 */
226static void platform_recover(int platform_mode)
227{
228 if (platform_mode && hibernation_ops && hibernation_ops->recover)
229 hibernation_ops->recover();
230}
231
232/**
233 * swsusp_show_speed - Print time elapsed between two events during hibernation.
234 * @start: Starting event.
235 * @stop: Final event.
236 * @nr_pages: Number of memory pages processed between @start and @stop.
237 * @msg: Additional diagnostic message to print.
238 */
239void swsusp_show_speed(ktime_t start, ktime_t stop,
240 unsigned nr_pages, char *msg)
241{
242 ktime_t diff;
243 u64 elapsed_centisecs64;
244 unsigned int centisecs;
245 unsigned int k;
246 unsigned int kps;
247
248 diff = ktime_sub(stop, start);
249 elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
250 centisecs = elapsed_centisecs64;
251 if (centisecs == 0)
252 centisecs = 1; /* avoid div-by-zero */
253 k = nr_pages * (PAGE_SIZE / 1024);
254 kps = (k * 100) / centisecs;
255 pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n",
256 msg, k, centisecs / 100, centisecs % 100, kps / 1000,
257 (kps % 1000) / 10);
258}
259
260__weak int arch_resume_nosmt(void)
261{
262 return 0;
263}
264
265/**
266 * create_image - Create a hibernation image.
267 * @platform_mode: Whether or not to use the platform driver.
268 *
269 * Execute device drivers' "late" and "noirq" freeze callbacks, create a
270 * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
271 *
272 * Control reappears in this routine after the subsequent restore.
273 */
274static int create_image(int platform_mode)
275{
276 int error;
277
278 error = dpm_suspend_end(PMSG_FREEZE);
279 if (error) {
280 pr_err("Some devices failed to power down, aborting hibernation\n");
281 return error;
282 }
283
284 error = platform_pre_snapshot(platform_mode);
285 if (error || hibernation_test(TEST_PLATFORM))
286 goto Platform_finish;
287
288 error = suspend_disable_secondary_cpus();
289 if (error || hibernation_test(TEST_CPUS))
290 goto Enable_cpus;
291
292 local_irq_disable();
293
294 system_state = SYSTEM_SUSPEND;
295
296 error = syscore_suspend();
297 if (error) {
298 pr_err("Some system devices failed to power down, aborting hibernation\n");
299 goto Enable_irqs;
300 }
301
302 if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
303 goto Power_up;
304
305 in_suspend = 1;
306 save_processor_state();
307 trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true);
308 error = swsusp_arch_suspend();
309 /* Restore control flow magically appears here */
310 restore_processor_state();
311 trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false);
312 if (error)
313 pr_err("Error %d creating hibernation image\n", error);
314
315 if (!in_suspend) {
316 events_check_enabled = false;
317 clear_free_pages();
318 }
319
320 platform_leave(platform_mode);
321
322 Power_up:
323 syscore_resume();
324
325 Enable_irqs:
326 system_state = SYSTEM_RUNNING;
327 local_irq_enable();
328
329 Enable_cpus:
330 suspend_enable_secondary_cpus();
331
332 /* Allow architectures to do nosmt-specific post-resume dances */
333 if (!in_suspend)
334 error = arch_resume_nosmt();
335
336 Platform_finish:
337 platform_finish(platform_mode);
338
339 dpm_resume_start(in_suspend ?
340 (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
341
342 return error;
343}
344
345/**
346 * hibernation_snapshot - Quiesce devices and create a hibernation image.
347 * @platform_mode: If set, use platform driver to prepare for the transition.
348 *
349 * This routine must be called with system_transition_mutex held.
350 */
351int hibernation_snapshot(int platform_mode)
352{
353 pm_message_t msg;
354 int error;
355
356 pm_suspend_clear_flags();
357 error = platform_begin(platform_mode);
358 if (error)
359 goto Close;
360
361 /* Preallocate image memory before shutting down devices. */
362 error = hibernate_preallocate_memory();
363 if (error)
364 goto Close;
365
366 error = freeze_kernel_threads();
367 if (error)
368 goto Cleanup;
369
370 if (hibernation_test(TEST_FREEZER)) {
371
372 /*
373 * Indicate to the caller that we are returning due to a
374 * successful freezer test.
375 */
376 freezer_test_done = true;
377 goto Thaw;
378 }
379
380 error = dpm_prepare(PMSG_FREEZE);
381 if (error) {
382 dpm_complete(PMSG_RECOVER);
383 goto Thaw;
384 }
385
386 suspend_console();
387 pm_restrict_gfp_mask();
388
389 error = dpm_suspend(PMSG_FREEZE);
390
391 if (error || hibernation_test(TEST_DEVICES))
392 platform_recover(platform_mode);
393 else
394 error = create_image(platform_mode);
395
396 /*
397 * In the case that we call create_image() above, the control
398 * returns here (1) after the image has been created or the
399 * image creation has failed and (2) after a successful restore.
400 */
401
402 /* We may need to release the preallocated image pages here. */
403 if (error || !in_suspend)
404 swsusp_free();
405
406 msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
407 dpm_resume(msg);
408
409 if (error || !in_suspend)
410 pm_restore_gfp_mask();
411
412 resume_console();
413 dpm_complete(msg);
414
415 Close:
416 platform_end(platform_mode);
417 return error;
418
419 Thaw:
420 thaw_kernel_threads();
421 Cleanup:
422 swsusp_free();
423 goto Close;
424}
425
426int __weak hibernate_resume_nonboot_cpu_disable(void)
427{
428 return suspend_disable_secondary_cpus();
429}
430
431/**
432 * resume_target_kernel - Restore system state from a hibernation image.
433 * @platform_mode: Whether or not to use the platform driver.
434 *
435 * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
436 * contents of highmem that have not been restored yet from the image and run
437 * the low-level code that will restore the remaining contents of memory and
438 * switch to the just restored target kernel.
439 */
440static int resume_target_kernel(bool platform_mode)
441{
442 int error;
443
444 error = dpm_suspend_end(PMSG_QUIESCE);
445 if (error) {
446 pr_err("Some devices failed to power down, aborting resume\n");
447 return error;
448 }
449
450 error = platform_pre_restore(platform_mode);
451 if (error)
452 goto Cleanup;
453
454 error = hibernate_resume_nonboot_cpu_disable();
455 if (error)
456 goto Enable_cpus;
457
458 local_irq_disable();
459 system_state = SYSTEM_SUSPEND;
460
461 error = syscore_suspend();
462 if (error)
463 goto Enable_irqs;
464
465 save_processor_state();
466 error = restore_highmem();
467 if (!error) {
468 error = swsusp_arch_resume();
469 /*
470 * The code below is only ever reached in case of a failure.
471 * Otherwise, execution continues at the place where
472 * swsusp_arch_suspend() was called.
473 */
474 BUG_ON(!error);
475 /*
476 * This call to restore_highmem() reverts the changes made by
477 * the previous one.
478 */
479 restore_highmem();
480 }
481 /*
482 * The only reason why swsusp_arch_resume() can fail is memory being
483 * very tight, so we have to free it as soon as we can to avoid
484 * subsequent failures.
485 */
486 swsusp_free();
487 restore_processor_state();
488 touch_softlockup_watchdog();
489
490 syscore_resume();
491
492 Enable_irqs:
493 system_state = SYSTEM_RUNNING;
494 local_irq_enable();
495
496 Enable_cpus:
497 suspend_enable_secondary_cpus();
498
499 Cleanup:
500 platform_restore_cleanup(platform_mode);
501
502 dpm_resume_start(PMSG_RECOVER);
503
504 return error;
505}
506
507/**
508 * hibernation_restore - Quiesce devices and restore from a hibernation image.
509 * @platform_mode: If set, use platform driver to prepare for the transition.
510 *
511 * This routine must be called with system_transition_mutex held. If it is
512 * successful, control reappears in the restored target kernel in
513 * hibernation_snapshot().
514 */
515int hibernation_restore(int platform_mode)
516{
517 int error;
518
519 pm_prepare_console();
520 suspend_console();
521 pm_restrict_gfp_mask();
522 error = dpm_suspend_start(PMSG_QUIESCE);
523 if (!error) {
524 error = resume_target_kernel(platform_mode);
525 /*
526 * The above should either succeed and jump to the new kernel,
527 * or return with an error. Otherwise things are just
528 * undefined, so let's be paranoid.
529 */
530 BUG_ON(!error);
531 }
532 dpm_resume_end(PMSG_RECOVER);
533 pm_restore_gfp_mask();
534 resume_console();
535 pm_restore_console();
536 return error;
537}
538
539/**
540 * hibernation_platform_enter - Power off the system using the platform driver.
541 */
542int hibernation_platform_enter(void)
543{
544 int error;
545
546 if (!hibernation_ops)
547 return -ENOSYS;
548
549 /*
550 * We have cancelled the power transition by running
551 * hibernation_ops->finish() before saving the image, so we should let
552 * the firmware know that we're going to enter the sleep state after all
553 */
554 error = hibernation_ops->begin(PMSG_HIBERNATE);
555 if (error)
556 goto Close;
557
558 entering_platform_hibernation = true;
559 suspend_console();
560 error = dpm_suspend_start(PMSG_HIBERNATE);
561 if (error) {
562 if (hibernation_ops->recover)
563 hibernation_ops->recover();
564 goto Resume_devices;
565 }
566
567 error = dpm_suspend_end(PMSG_HIBERNATE);
568 if (error)
569 goto Resume_devices;
570
571 error = hibernation_ops->prepare();
572 if (error)
573 goto Platform_finish;
574
575 error = suspend_disable_secondary_cpus();
576 if (error)
577 goto Enable_cpus;
578
579 local_irq_disable();
580 system_state = SYSTEM_SUSPEND;
581 syscore_suspend();
582 if (pm_wakeup_pending()) {
583 error = -EAGAIN;
584 goto Power_up;
585 }
586
587 hibernation_ops->enter();
588 /* We should never get here */
589 while (1);
590
591 Power_up:
592 syscore_resume();
593 system_state = SYSTEM_RUNNING;
594 local_irq_enable();
595
596 Enable_cpus:
597 suspend_enable_secondary_cpus();
598
599 Platform_finish:
600 hibernation_ops->finish();
601
602 dpm_resume_start(PMSG_RESTORE);
603
604 Resume_devices:
605 entering_platform_hibernation = false;
606 dpm_resume_end(PMSG_RESTORE);
607 resume_console();
608
609 Close:
610 hibernation_ops->end();
611
612 return error;
613}
614
615/**
616 * power_down - Shut the machine down for hibernation.
617 *
618 * Use the platform driver, if configured, to put the system into the sleep
619 * state corresponding to hibernation, or try to power it off or reboot,
620 * depending on the value of hibernation_mode.
621 */
622static void power_down(void)
623{
624#ifdef CONFIG_SUSPEND
625 int error;
626
627 if (hibernation_mode == HIBERNATION_SUSPEND) {
628 error = suspend_devices_and_enter(PM_SUSPEND_MEM);
629 if (error) {
630 hibernation_mode = hibernation_ops ?
631 HIBERNATION_PLATFORM :
632 HIBERNATION_SHUTDOWN;
633 } else {
634 /* Restore swap signature. */
635 error = swsusp_unmark();
636 if (error)
637 pr_err("Swap will be unusable! Try swapon -a.\n");
638
639 return;
640 }
641 }
642#endif
643
644 switch (hibernation_mode) {
645 case HIBERNATION_REBOOT:
646 kernel_restart(NULL);
647 break;
648 case HIBERNATION_PLATFORM:
649 hibernation_platform_enter();
650 /* Fall through */
651 case HIBERNATION_SHUTDOWN:
652 if (pm_power_off)
653 kernel_power_off();
654 break;
655 }
656 kernel_halt();
657 /*
658 * Valid image is on the disk, if we continue we risk serious data
659 * corruption after resume.
660 */
661 pr_crit("Power down manually\n");
662 while (1)
663 cpu_relax();
664}
665
666static int load_image_and_restore(void)
667{
668 int error;
669 unsigned int flags;
670
671 pm_pr_dbg("Loading hibernation image.\n");
672
673 lock_device_hotplug();
674 error = create_basic_memory_bitmaps();
675 if (error)
676 goto Unlock;
677
678 error = swsusp_read(&flags);
679 swsusp_close(FMODE_READ);
680 if (!error)
681 hibernation_restore(flags & SF_PLATFORM_MODE);
682
683 pr_err("Failed to load hibernation image, recovering.\n");
684 swsusp_free();
685 free_basic_memory_bitmaps();
686 Unlock:
687 unlock_device_hotplug();
688
689 return error;
690}
691
692/**
693 * hibernate - Carry out system hibernation, including saving the image.
694 */
695int hibernate(void)
696{
697 int error, nr_calls = 0;
698 bool snapshot_test = false;
699
700 if (!hibernation_available()) {
701 pm_pr_dbg("Hibernation not available.\n");
702 return -EPERM;
703 }
704
705 lock_system_sleep();
706 /* The snapshot device should not be opened while we're running */
707 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
708 error = -EBUSY;
709 goto Unlock;
710 }
711
712 pr_info("hibernation entry\n");
713 pm_prepare_console();
714 error = __pm_notifier_call_chain(PM_HIBERNATION_PREPARE, -1, &nr_calls);
715 if (error) {
716 nr_calls--;
717 goto Exit;
718 }
719
720 ksys_sync_helper();
721
722 error = freeze_processes();
723 if (error)
724 goto Exit;
725
726 lock_device_hotplug();
727 /* Allocate memory management structures */
728 error = create_basic_memory_bitmaps();
729 if (error)
730 goto Thaw;
731
732 error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
733 if (error || freezer_test_done)
734 goto Free_bitmaps;
735
736 if (in_suspend) {
737 unsigned int flags = 0;
738
739 if (hibernation_mode == HIBERNATION_PLATFORM)
740 flags |= SF_PLATFORM_MODE;
741 if (nocompress)
742 flags |= SF_NOCOMPRESS_MODE;
743 else
744 flags |= SF_CRC32_MODE;
745
746 pm_pr_dbg("Writing image.\n");
747 error = swsusp_write(flags);
748 swsusp_free();
749 if (!error) {
750 if (hibernation_mode == HIBERNATION_TEST_RESUME)
751 snapshot_test = true;
752 else
753 power_down();
754 }
755 in_suspend = 0;
756 pm_restore_gfp_mask();
757 } else {
758 pm_pr_dbg("Image restored successfully.\n");
759 }
760
761 Free_bitmaps:
762 free_basic_memory_bitmaps();
763 Thaw:
764 unlock_device_hotplug();
765 if (snapshot_test) {
766 pm_pr_dbg("Checking hibernation image\n");
767 error = swsusp_check();
768 if (!error)
769 error = load_image_and_restore();
770 }
771 thaw_processes();
772
773 /* Don't bother checking whether freezer_test_done is true */
774 freezer_test_done = false;
775 Exit:
776 __pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
777 pm_restore_console();
778 atomic_inc(&snapshot_device_available);
779 Unlock:
780 unlock_system_sleep();
781 pr_info("hibernation exit\n");
782
783 return error;
784}
785
786
787/**
788 * software_resume - Resume from a saved hibernation image.
789 *
790 * This routine is called as a late initcall, when all devices have been
791 * discovered and initialized already.
792 *
793 * The image reading code is called to see if there is a hibernation image
794 * available for reading. If that is the case, devices are quiesced and the
795 * contents of memory is restored from the saved image.
796 *
797 * If this is successful, control reappears in the restored target kernel in
798 * hibernation_snapshot() which returns to hibernate(). Otherwise, the routine
799 * attempts to recover gracefully and make the kernel return to the normal mode
800 * of operation.
801 */
802static int software_resume(void)
803{
804 int error, nr_calls = 0;
805
806 /*
807 * If the user said "noresume".. bail out early.
808 */
809 if (noresume || !hibernation_available())
810 return 0;
811
812 /*
813 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
814 * is configured into the kernel. Since the regular hibernate
815 * trigger path is via sysfs which takes a buffer mutex before
816 * calling hibernate functions (which take system_transition_mutex)
817 * this can cause lockdep to complain about a possible ABBA deadlock
818 * which cannot happen since we're in the boot code here and
819 * sysfs can't be invoked yet. Therefore, we use a subclass
820 * here to avoid lockdep complaining.
821 */
822 mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
823
824 if (swsusp_resume_device)
825 goto Check_image;
826
827 if (!strlen(resume_file)) {
828 error = -ENOENT;
829 goto Unlock;
830 }
831
832 pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
833
834 if (resume_delay) {
835 pr_info("Waiting %dsec before reading resume device ...\n",
836 resume_delay);
837 ssleep(resume_delay);
838 }
839
840 /* Check if the device is there */
841 swsusp_resume_device = name_to_dev_t(resume_file);
842
843 /*
844 * name_to_dev_t is ineffective to verify parition if resume_file is in
845 * integer format. (e.g. major:minor)
846 */
847 if (isdigit(resume_file[0]) && resume_wait) {
848 int partno;
849 while (!get_gendisk(swsusp_resume_device, &partno))
850 msleep(10);
851 }
852
853 if (!swsusp_resume_device) {
854 /*
855 * Some device discovery might still be in progress; we need
856 * to wait for this to finish.
857 */
858 wait_for_device_probe();
859
860 if (resume_wait) {
861 while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
862 msleep(10);
863 async_synchronize_full();
864 }
865
866 swsusp_resume_device = name_to_dev_t(resume_file);
867 if (!swsusp_resume_device) {
868 error = -ENODEV;
869 goto Unlock;
870 }
871 }
872
873 Check_image:
874 pm_pr_dbg("Hibernation image partition %d:%d present\n",
875 MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
876
877 pm_pr_dbg("Looking for hibernation image.\n");
878 error = swsusp_check();
879 if (error)
880 goto Unlock;
881
882 /* The snapshot device should not be opened while we're running */
883 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
884 error = -EBUSY;
885 swsusp_close(FMODE_READ);
886 goto Unlock;
887 }
888
889 pr_info("resume from hibernation\n");
890 pm_prepare_console();
891 error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
892 if (error) {
893 nr_calls--;
894 goto Close_Finish;
895 }
896
897 pm_pr_dbg("Preparing processes for restore.\n");
898 error = freeze_processes();
899 if (error)
900 goto Close_Finish;
901 error = load_image_and_restore();
902 thaw_processes();
903 Finish:
904 __pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
905 pm_restore_console();
906 pr_info("resume from hibernation failed (%d)\n", error);
907 atomic_inc(&snapshot_device_available);
908 /* For success case, the suspend path will release the lock */
909 Unlock:
910 mutex_unlock(&system_transition_mutex);
911 pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
912 return error;
913 Close_Finish:
914 swsusp_close(FMODE_READ);
915 goto Finish;
916}
917
918late_initcall_sync(software_resume);
919
920
921static const char * const hibernation_modes[] = {
922 [HIBERNATION_PLATFORM] = "platform",
923 [HIBERNATION_SHUTDOWN] = "shutdown",
924 [HIBERNATION_REBOOT] = "reboot",
925#ifdef CONFIG_SUSPEND
926 [HIBERNATION_SUSPEND] = "suspend",
927#endif
928 [HIBERNATION_TEST_RESUME] = "test_resume",
929};
930
931/*
932 * /sys/power/disk - Control hibernation mode.
933 *
934 * Hibernation can be handled in several ways. There are a few different ways
935 * to put the system into the sleep state: using the platform driver (e.g. ACPI
936 * or other hibernation_ops), powering it off or rebooting it (for testing
937 * mostly).
938 *
939 * The sysfs file /sys/power/disk provides an interface for selecting the
940 * hibernation mode to use. Reading from this file causes the available modes
941 * to be printed. There are 3 modes that can be supported:
942 *
943 * 'platform'
944 * 'shutdown'
945 * 'reboot'
946 *
947 * If a platform hibernation driver is in use, 'platform' will be supported
948 * and will be used by default. Otherwise, 'shutdown' will be used by default.
949 * The selected option (i.e. the one corresponding to the current value of
950 * hibernation_mode) is enclosed by a square bracket.
951 *
952 * To select a given hibernation mode it is necessary to write the mode's
953 * string representation (as returned by reading from /sys/power/disk) back
954 * into /sys/power/disk.
955 */
956
957static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
958 char *buf)
959{
960 int i;
961 char *start = buf;
962
963 if (!hibernation_available())
964 return sprintf(buf, "[disabled]\n");
965
966 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
967 if (!hibernation_modes[i])
968 continue;
969 switch (i) {
970 case HIBERNATION_SHUTDOWN:
971 case HIBERNATION_REBOOT:
972#ifdef CONFIG_SUSPEND
973 case HIBERNATION_SUSPEND:
974#endif
975 case HIBERNATION_TEST_RESUME:
976 break;
977 case HIBERNATION_PLATFORM:
978 if (hibernation_ops)
979 break;
980 /* not a valid mode, continue with loop */
981 continue;
982 }
983 if (i == hibernation_mode)
984 buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
985 else
986 buf += sprintf(buf, "%s ", hibernation_modes[i]);
987 }
988 buf += sprintf(buf, "\n");
989 return buf-start;
990}
991
992static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
993 const char *buf, size_t n)
994{
995 int error = 0;
996 int i;
997 int len;
998 char *p;
999 int mode = HIBERNATION_INVALID;
1000
1001 if (!hibernation_available())
1002 return -EPERM;
1003
1004 p = memchr(buf, '\n', n);
1005 len = p ? p - buf : n;
1006
1007 lock_system_sleep();
1008 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
1009 if (len == strlen(hibernation_modes[i])
1010 && !strncmp(buf, hibernation_modes[i], len)) {
1011 mode = i;
1012 break;
1013 }
1014 }
1015 if (mode != HIBERNATION_INVALID) {
1016 switch (mode) {
1017 case HIBERNATION_SHUTDOWN:
1018 case HIBERNATION_REBOOT:
1019#ifdef CONFIG_SUSPEND
1020 case HIBERNATION_SUSPEND:
1021#endif
1022 case HIBERNATION_TEST_RESUME:
1023 hibernation_mode = mode;
1024 break;
1025 case HIBERNATION_PLATFORM:
1026 if (hibernation_ops)
1027 hibernation_mode = mode;
1028 else
1029 error = -EINVAL;
1030 }
1031 } else
1032 error = -EINVAL;
1033
1034 if (!error)
1035 pm_pr_dbg("Hibernation mode set to '%s'\n",
1036 hibernation_modes[mode]);
1037 unlock_system_sleep();
1038 return error ? error : n;
1039}
1040
1041power_attr(disk);
1042
1043static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
1044 char *buf)
1045{
1046 return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
1047 MINOR(swsusp_resume_device));
1048}
1049
1050static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
1051 const char *buf, size_t n)
1052{
1053 dev_t res;
1054 int len = n;
1055 char *name;
1056
1057 if (len && buf[len-1] == '\n')
1058 len--;
1059 name = kstrndup(buf, len, GFP_KERNEL);
1060 if (!name)
1061 return -ENOMEM;
1062
1063 res = name_to_dev_t(name);
1064 kfree(name);
1065 if (!res)
1066 return -EINVAL;
1067
1068 lock_system_sleep();
1069 swsusp_resume_device = res;
1070 unlock_system_sleep();
1071 pm_pr_dbg("Configured resume from disk to %u\n", swsusp_resume_device);
1072 noresume = 0;
1073 software_resume();
1074 return n;
1075}
1076
1077power_attr(resume);
1078
1079static ssize_t resume_offset_show(struct kobject *kobj,
1080 struct kobj_attribute *attr, char *buf)
1081{
1082 return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
1083}
1084
1085static ssize_t resume_offset_store(struct kobject *kobj,
1086 struct kobj_attribute *attr, const char *buf,
1087 size_t n)
1088{
1089 unsigned long long offset;
1090 int rc;
1091
1092 rc = kstrtoull(buf, 0, &offset);
1093 if (rc)
1094 return rc;
1095 swsusp_resume_block = offset;
1096
1097 return n;
1098}
1099
1100power_attr(resume_offset);
1101
1102static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
1103 char *buf)
1104{
1105 return sprintf(buf, "%lu\n", image_size);
1106}
1107
1108static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
1109 const char *buf, size_t n)
1110{
1111 unsigned long size;
1112
1113 if (sscanf(buf, "%lu", &size) == 1) {
1114 image_size = size;
1115 return n;
1116 }
1117
1118 return -EINVAL;
1119}
1120
1121power_attr(image_size);
1122
1123static ssize_t reserved_size_show(struct kobject *kobj,
1124 struct kobj_attribute *attr, char *buf)
1125{
1126 return sprintf(buf, "%lu\n", reserved_size);
1127}
1128
1129static ssize_t reserved_size_store(struct kobject *kobj,
1130 struct kobj_attribute *attr,
1131 const char *buf, size_t n)
1132{
1133 unsigned long size;
1134
1135 if (sscanf(buf, "%lu", &size) == 1) {
1136 reserved_size = size;
1137 return n;
1138 }
1139
1140 return -EINVAL;
1141}
1142
1143power_attr(reserved_size);
1144
1145static struct attribute * g[] = {
1146 &disk_attr.attr,
1147 &resume_offset_attr.attr,
1148 &resume_attr.attr,
1149 &image_size_attr.attr,
1150 &reserved_size_attr.attr,
1151 NULL,
1152};
1153
1154
1155static const struct attribute_group attr_group = {
1156 .attrs = g,
1157};
1158
1159
1160static int __init pm_disk_init(void)
1161{
1162 return sysfs_create_group(power_kobj, &attr_group);
1163}
1164
1165core_initcall(pm_disk_init);
1166
1167
1168static int __init resume_setup(char *str)
1169{
1170 if (noresume)
1171 return 1;
1172
1173 strncpy( resume_file, str, 255 );
1174 return 1;
1175}
1176
1177static int __init resume_offset_setup(char *str)
1178{
1179 unsigned long long offset;
1180
1181 if (noresume)
1182 return 1;
1183
1184 if (sscanf(str, "%llu", &offset) == 1)
1185 swsusp_resume_block = offset;
1186
1187 return 1;
1188}
1189
1190static int __init hibernate_setup(char *str)
1191{
1192 if (!strncmp(str, "noresume", 8)) {
1193 noresume = 1;
1194 } else if (!strncmp(str, "nocompress", 10)) {
1195 nocompress = 1;
1196 } else if (!strncmp(str, "no", 2)) {
1197 noresume = 1;
1198 nohibernate = 1;
1199 } else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)
1200 && !strncmp(str, "protect_image", 13)) {
1201 enable_restore_image_protection();
1202 }
1203 return 1;
1204}
1205
1206static int __init noresume_setup(char *str)
1207{
1208 noresume = 1;
1209 return 1;
1210}
1211
1212static int __init resumewait_setup(char *str)
1213{
1214 resume_wait = 1;
1215 return 1;
1216}
1217
1218static int __init resumedelay_setup(char *str)
1219{
1220 int rc = kstrtouint(str, 0, &resume_delay);
1221
1222 if (rc)
1223 return rc;
1224 return 1;
1225}
1226
1227static int __init nohibernate_setup(char *str)
1228{
1229 noresume = 1;
1230 nohibernate = 1;
1231 return 1;
1232}
1233
1234__setup("noresume", noresume_setup);
1235__setup("resume_offset=", resume_offset_setup);
1236__setup("resume=", resume_setup);
1237__setup("hibernate=", hibernate_setup);
1238__setup("resumewait", resumewait_setup);
1239__setup("resumedelay=", resumedelay_setup);
1240__setup("nohibernate", nohibernate_setup);
1/*
2 * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
3 *
4 * Copyright (c) 2003 Patrick Mochel
5 * Copyright (c) 2003 Open Source Development Lab
6 * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
7 * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
8 *
9 * This file is released under the GPLv2.
10 */
11
12#include <linux/export.h>
13#include <linux/suspend.h>
14#include <linux/syscalls.h>
15#include <linux/reboot.h>
16#include <linux/string.h>
17#include <linux/device.h>
18#include <linux/async.h>
19#include <linux/delay.h>
20#include <linux/fs.h>
21#include <linux/mount.h>
22#include <linux/pm.h>
23#include <linux/console.h>
24#include <linux/cpu.h>
25#include <linux/freezer.h>
26#include <linux/gfp.h>
27#include <linux/syscore_ops.h>
28#include <linux/ctype.h>
29#include <linux/genhd.h>
30
31#include "power.h"
32
33
34static int nocompress;
35static int noresume;
36static int resume_wait;
37static int resume_delay;
38static char resume_file[256] = CONFIG_PM_STD_PARTITION;
39dev_t swsusp_resume_device;
40sector_t swsusp_resume_block;
41int in_suspend __nosavedata;
42
43enum {
44 HIBERNATION_INVALID,
45 HIBERNATION_PLATFORM,
46 HIBERNATION_SHUTDOWN,
47 HIBERNATION_REBOOT,
48 /* keep last */
49 __HIBERNATION_AFTER_LAST
50};
51#define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
52#define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
53
54static int hibernation_mode = HIBERNATION_SHUTDOWN;
55
56bool freezer_test_done;
57
58static const struct platform_hibernation_ops *hibernation_ops;
59
60/**
61 * hibernation_set_ops - Set the global hibernate operations.
62 * @ops: Hibernation operations to use in subsequent hibernation transitions.
63 */
64void hibernation_set_ops(const struct platform_hibernation_ops *ops)
65{
66 if (ops && !(ops->begin && ops->end && ops->pre_snapshot
67 && ops->prepare && ops->finish && ops->enter && ops->pre_restore
68 && ops->restore_cleanup && ops->leave)) {
69 WARN_ON(1);
70 return;
71 }
72 lock_system_sleep();
73 hibernation_ops = ops;
74 if (ops)
75 hibernation_mode = HIBERNATION_PLATFORM;
76 else if (hibernation_mode == HIBERNATION_PLATFORM)
77 hibernation_mode = HIBERNATION_SHUTDOWN;
78
79 unlock_system_sleep();
80}
81
82static bool entering_platform_hibernation;
83
84bool system_entering_hibernation(void)
85{
86 return entering_platform_hibernation;
87}
88EXPORT_SYMBOL(system_entering_hibernation);
89
90#ifdef CONFIG_PM_DEBUG
91static void hibernation_debug_sleep(void)
92{
93 printk(KERN_INFO "hibernation debug: Waiting for 5 seconds.\n");
94 mdelay(5000);
95}
96
97static int hibernation_test(int level)
98{
99 if (pm_test_level == level) {
100 hibernation_debug_sleep();
101 return 1;
102 }
103 return 0;
104}
105#else /* !CONFIG_PM_DEBUG */
106static int hibernation_test(int level) { return 0; }
107#endif /* !CONFIG_PM_DEBUG */
108
109/**
110 * platform_begin - Call platform to start hibernation.
111 * @platform_mode: Whether or not to use the platform driver.
112 */
113static int platform_begin(int platform_mode)
114{
115 return (platform_mode && hibernation_ops) ?
116 hibernation_ops->begin() : 0;
117}
118
119/**
120 * platform_end - Call platform to finish transition to the working state.
121 * @platform_mode: Whether or not to use the platform driver.
122 */
123static void platform_end(int platform_mode)
124{
125 if (platform_mode && hibernation_ops)
126 hibernation_ops->end();
127}
128
129/**
130 * platform_pre_snapshot - Call platform to prepare the machine for hibernation.
131 * @platform_mode: Whether or not to use the platform driver.
132 *
133 * Use the platform driver to prepare the system for creating a hibernate image,
134 * if so configured, and return an error code if that fails.
135 */
136
137static int platform_pre_snapshot(int platform_mode)
138{
139 return (platform_mode && hibernation_ops) ?
140 hibernation_ops->pre_snapshot() : 0;
141}
142
143/**
144 * platform_leave - Call platform to prepare a transition to the working state.
145 * @platform_mode: Whether or not to use the platform driver.
146 *
147 * Use the platform driver prepare to prepare the machine for switching to the
148 * normal mode of operation.
149 *
150 * This routine is called on one CPU with interrupts disabled.
151 */
152static void platform_leave(int platform_mode)
153{
154 if (platform_mode && hibernation_ops)
155 hibernation_ops->leave();
156}
157
158/**
159 * platform_finish - Call platform to switch the system to the working state.
160 * @platform_mode: Whether or not to use the platform driver.
161 *
162 * Use the platform driver to switch the machine to the normal mode of
163 * operation.
164 *
165 * This routine must be called after platform_prepare().
166 */
167static void platform_finish(int platform_mode)
168{
169 if (platform_mode && hibernation_ops)
170 hibernation_ops->finish();
171}
172
173/**
174 * platform_pre_restore - Prepare for hibernate image restoration.
175 * @platform_mode: Whether or not to use the platform driver.
176 *
177 * Use the platform driver to prepare the system for resume from a hibernation
178 * image.
179 *
180 * If the restore fails after this function has been called,
181 * platform_restore_cleanup() must be called.
182 */
183static int platform_pre_restore(int platform_mode)
184{
185 return (platform_mode && hibernation_ops) ?
186 hibernation_ops->pre_restore() : 0;
187}
188
189/**
190 * platform_restore_cleanup - Switch to the working state after failing restore.
191 * @platform_mode: Whether or not to use the platform driver.
192 *
193 * Use the platform driver to switch the system to the normal mode of operation
194 * after a failing restore.
195 *
196 * If platform_pre_restore() has been called before the failing restore, this
197 * function must be called too, regardless of the result of
198 * platform_pre_restore().
199 */
200static void platform_restore_cleanup(int platform_mode)
201{
202 if (platform_mode && hibernation_ops)
203 hibernation_ops->restore_cleanup();
204}
205
206/**
207 * platform_recover - Recover from a failure to suspend devices.
208 * @platform_mode: Whether or not to use the platform driver.
209 */
210static void platform_recover(int platform_mode)
211{
212 if (platform_mode && hibernation_ops && hibernation_ops->recover)
213 hibernation_ops->recover();
214}
215
216/**
217 * swsusp_show_speed - Print time elapsed between two events during hibernation.
218 * @start: Starting event.
219 * @stop: Final event.
220 * @nr_pages: Number of memory pages processed between @start and @stop.
221 * @msg: Additional diagnostic message to print.
222 */
223void swsusp_show_speed(struct timeval *start, struct timeval *stop,
224 unsigned nr_pages, char *msg)
225{
226 s64 elapsed_centisecs64;
227 int centisecs;
228 int k;
229 int kps;
230
231 elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start);
232 do_div(elapsed_centisecs64, NSEC_PER_SEC / 100);
233 centisecs = elapsed_centisecs64;
234 if (centisecs == 0)
235 centisecs = 1; /* avoid div-by-zero */
236 k = nr_pages * (PAGE_SIZE / 1024);
237 kps = (k * 100) / centisecs;
238 printk(KERN_INFO "PM: %s %d kbytes in %d.%02d seconds (%d.%02d MB/s)\n",
239 msg, k,
240 centisecs / 100, centisecs % 100,
241 kps / 1000, (kps % 1000) / 10);
242}
243
244/**
245 * create_image - Create a hibernation image.
246 * @platform_mode: Whether or not to use the platform driver.
247 *
248 * Execute device drivers' "late" and "noirq" freeze callbacks, create a
249 * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
250 *
251 * Control reappears in this routine after the subsequent restore.
252 */
253static int create_image(int platform_mode)
254{
255 int error;
256
257 error = dpm_suspend_end(PMSG_FREEZE);
258 if (error) {
259 printk(KERN_ERR "PM: Some devices failed to power down, "
260 "aborting hibernation\n");
261 return error;
262 }
263
264 error = platform_pre_snapshot(platform_mode);
265 if (error || hibernation_test(TEST_PLATFORM))
266 goto Platform_finish;
267
268 error = disable_nonboot_cpus();
269 if (error || hibernation_test(TEST_CPUS))
270 goto Enable_cpus;
271
272 local_irq_disable();
273
274 error = syscore_suspend();
275 if (error) {
276 printk(KERN_ERR "PM: Some system devices failed to power down, "
277 "aborting hibernation\n");
278 goto Enable_irqs;
279 }
280
281 if (hibernation_test(TEST_CORE) || pm_wakeup_pending())
282 goto Power_up;
283
284 in_suspend = 1;
285 save_processor_state();
286 error = swsusp_arch_suspend();
287 if (error)
288 printk(KERN_ERR "PM: Error %d creating hibernation image\n",
289 error);
290 /* Restore control flow magically appears here */
291 restore_processor_state();
292 if (!in_suspend) {
293 events_check_enabled = false;
294 platform_leave(platform_mode);
295 }
296
297 Power_up:
298 syscore_resume();
299
300 Enable_irqs:
301 local_irq_enable();
302
303 Enable_cpus:
304 enable_nonboot_cpus();
305
306 Platform_finish:
307 platform_finish(platform_mode);
308
309 dpm_resume_start(in_suspend ?
310 (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
311
312 return error;
313}
314
315/**
316 * hibernation_snapshot - Quiesce devices and create a hibernation image.
317 * @platform_mode: If set, use platform driver to prepare for the transition.
318 *
319 * This routine must be called with pm_mutex held.
320 */
321int hibernation_snapshot(int platform_mode)
322{
323 pm_message_t msg;
324 int error;
325
326 error = platform_begin(platform_mode);
327 if (error)
328 goto Close;
329
330 /* Preallocate image memory before shutting down devices. */
331 error = hibernate_preallocate_memory();
332 if (error)
333 goto Close;
334
335 error = freeze_kernel_threads();
336 if (error)
337 goto Cleanup;
338
339 if (hibernation_test(TEST_FREEZER)) {
340
341 /*
342 * Indicate to the caller that we are returning due to a
343 * successful freezer test.
344 */
345 freezer_test_done = true;
346 goto Thaw;
347 }
348
349 error = dpm_prepare(PMSG_FREEZE);
350 if (error) {
351 dpm_complete(PMSG_RECOVER);
352 goto Thaw;
353 }
354
355 suspend_console();
356 ftrace_stop();
357 pm_restrict_gfp_mask();
358
359 error = dpm_suspend(PMSG_FREEZE);
360
361 if (error || hibernation_test(TEST_DEVICES))
362 platform_recover(platform_mode);
363 else
364 error = create_image(platform_mode);
365
366 /*
367 * In the case that we call create_image() above, the control
368 * returns here (1) after the image has been created or the
369 * image creation has failed and (2) after a successful restore.
370 */
371
372 /* We may need to release the preallocated image pages here. */
373 if (error || !in_suspend)
374 swsusp_free();
375
376 msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
377 dpm_resume(msg);
378
379 if (error || !in_suspend)
380 pm_restore_gfp_mask();
381
382 ftrace_start();
383 resume_console();
384 dpm_complete(msg);
385
386 Close:
387 platform_end(platform_mode);
388 return error;
389
390 Thaw:
391 thaw_kernel_threads();
392 Cleanup:
393 swsusp_free();
394 goto Close;
395}
396
397/**
398 * resume_target_kernel - Restore system state from a hibernation image.
399 * @platform_mode: Whether or not to use the platform driver.
400 *
401 * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
402 * contents of highmem that have not been restored yet from the image and run
403 * the low-level code that will restore the remaining contents of memory and
404 * switch to the just restored target kernel.
405 */
406static int resume_target_kernel(bool platform_mode)
407{
408 int error;
409
410 error = dpm_suspend_end(PMSG_QUIESCE);
411 if (error) {
412 printk(KERN_ERR "PM: Some devices failed to power down, "
413 "aborting resume\n");
414 return error;
415 }
416
417 error = platform_pre_restore(platform_mode);
418 if (error)
419 goto Cleanup;
420
421 error = disable_nonboot_cpus();
422 if (error)
423 goto Enable_cpus;
424
425 local_irq_disable();
426
427 error = syscore_suspend();
428 if (error)
429 goto Enable_irqs;
430
431 save_processor_state();
432 error = restore_highmem();
433 if (!error) {
434 error = swsusp_arch_resume();
435 /*
436 * The code below is only ever reached in case of a failure.
437 * Otherwise, execution continues at the place where
438 * swsusp_arch_suspend() was called.
439 */
440 BUG_ON(!error);
441 /*
442 * This call to restore_highmem() reverts the changes made by
443 * the previous one.
444 */
445 restore_highmem();
446 }
447 /*
448 * The only reason why swsusp_arch_resume() can fail is memory being
449 * very tight, so we have to free it as soon as we can to avoid
450 * subsequent failures.
451 */
452 swsusp_free();
453 restore_processor_state();
454 touch_softlockup_watchdog();
455
456 syscore_resume();
457
458 Enable_irqs:
459 local_irq_enable();
460
461 Enable_cpus:
462 enable_nonboot_cpus();
463
464 Cleanup:
465 platform_restore_cleanup(platform_mode);
466
467 dpm_resume_start(PMSG_RECOVER);
468
469 return error;
470}
471
472/**
473 * hibernation_restore - Quiesce devices and restore from a hibernation image.
474 * @platform_mode: If set, use platform driver to prepare for the transition.
475 *
476 * This routine must be called with pm_mutex held. If it is successful, control
477 * reappears in the restored target kernel in hibernation_snapshot().
478 */
479int hibernation_restore(int platform_mode)
480{
481 int error;
482
483 pm_prepare_console();
484 suspend_console();
485 ftrace_stop();
486 pm_restrict_gfp_mask();
487 error = dpm_suspend_start(PMSG_QUIESCE);
488 if (!error) {
489 error = resume_target_kernel(platform_mode);
490 dpm_resume_end(PMSG_RECOVER);
491 }
492 pm_restore_gfp_mask();
493 ftrace_start();
494 resume_console();
495 pm_restore_console();
496 return error;
497}
498
499/**
500 * hibernation_platform_enter - Power off the system using the platform driver.
501 */
502int hibernation_platform_enter(void)
503{
504 int error;
505
506 if (!hibernation_ops)
507 return -ENOSYS;
508
509 /*
510 * We have cancelled the power transition by running
511 * hibernation_ops->finish() before saving the image, so we should let
512 * the firmware know that we're going to enter the sleep state after all
513 */
514 error = hibernation_ops->begin();
515 if (error)
516 goto Close;
517
518 entering_platform_hibernation = true;
519 suspend_console();
520 ftrace_stop();
521 error = dpm_suspend_start(PMSG_HIBERNATE);
522 if (error) {
523 if (hibernation_ops->recover)
524 hibernation_ops->recover();
525 goto Resume_devices;
526 }
527
528 error = dpm_suspend_end(PMSG_HIBERNATE);
529 if (error)
530 goto Resume_devices;
531
532 error = hibernation_ops->prepare();
533 if (error)
534 goto Platform_finish;
535
536 error = disable_nonboot_cpus();
537 if (error)
538 goto Platform_finish;
539
540 local_irq_disable();
541 syscore_suspend();
542 if (pm_wakeup_pending()) {
543 error = -EAGAIN;
544 goto Power_up;
545 }
546
547 hibernation_ops->enter();
548 /* We should never get here */
549 while (1);
550
551 Power_up:
552 syscore_resume();
553 local_irq_enable();
554 enable_nonboot_cpus();
555
556 Platform_finish:
557 hibernation_ops->finish();
558
559 dpm_resume_start(PMSG_RESTORE);
560
561 Resume_devices:
562 entering_platform_hibernation = false;
563 dpm_resume_end(PMSG_RESTORE);
564 ftrace_start();
565 resume_console();
566
567 Close:
568 hibernation_ops->end();
569
570 return error;
571}
572
573/**
574 * power_down - Shut the machine down for hibernation.
575 *
576 * Use the platform driver, if configured, to put the system into the sleep
577 * state corresponding to hibernation, or try to power it off or reboot,
578 * depending on the value of hibernation_mode.
579 */
580static void power_down(void)
581{
582 switch (hibernation_mode) {
583 case HIBERNATION_REBOOT:
584 kernel_restart(NULL);
585 break;
586 case HIBERNATION_PLATFORM:
587 hibernation_platform_enter();
588 case HIBERNATION_SHUTDOWN:
589 kernel_power_off();
590 break;
591 }
592 kernel_halt();
593 /*
594 * Valid image is on the disk, if we continue we risk serious data
595 * corruption after resume.
596 */
597 printk(KERN_CRIT "PM: Please power down manually\n");
598 while(1);
599}
600
601/**
602 * hibernate - Carry out system hibernation, including saving the image.
603 */
604int hibernate(void)
605{
606 int error;
607
608 lock_system_sleep();
609 /* The snapshot device should not be opened while we're running */
610 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
611 error = -EBUSY;
612 goto Unlock;
613 }
614
615 pm_prepare_console();
616 error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
617 if (error)
618 goto Exit;
619
620 /* Allocate memory management structures */
621 error = create_basic_memory_bitmaps();
622 if (error)
623 goto Exit;
624
625 printk(KERN_INFO "PM: Syncing filesystems ... ");
626 sys_sync();
627 printk("done.\n");
628
629 error = freeze_processes();
630 if (error)
631 goto Free_bitmaps;
632
633 error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
634 if (error || freezer_test_done)
635 goto Thaw;
636
637 if (in_suspend) {
638 unsigned int flags = 0;
639
640 if (hibernation_mode == HIBERNATION_PLATFORM)
641 flags |= SF_PLATFORM_MODE;
642 if (nocompress)
643 flags |= SF_NOCOMPRESS_MODE;
644 else
645 flags |= SF_CRC32_MODE;
646
647 pr_debug("PM: writing image.\n");
648 error = swsusp_write(flags);
649 swsusp_free();
650 if (!error)
651 power_down();
652 in_suspend = 0;
653 pm_restore_gfp_mask();
654 } else {
655 pr_debug("PM: Image restored successfully.\n");
656 }
657
658 Thaw:
659 thaw_processes();
660
661 /* Don't bother checking whether freezer_test_done is true */
662 freezer_test_done = false;
663
664 Free_bitmaps:
665 free_basic_memory_bitmaps();
666 Exit:
667 pm_notifier_call_chain(PM_POST_HIBERNATION);
668 pm_restore_console();
669 atomic_inc(&snapshot_device_available);
670 Unlock:
671 unlock_system_sleep();
672 return error;
673}
674
675
676/**
677 * software_resume - Resume from a saved hibernation image.
678 *
679 * This routine is called as a late initcall, when all devices have been
680 * discovered and initialized already.
681 *
682 * The image reading code is called to see if there is a hibernation image
683 * available for reading. If that is the case, devices are quiesced and the
684 * contents of memory is restored from the saved image.
685 *
686 * If this is successful, control reappears in the restored target kernel in
687 * hibernation_snaphot() which returns to hibernate(). Otherwise, the routine
688 * attempts to recover gracefully and make the kernel return to the normal mode
689 * of operation.
690 */
691static int software_resume(void)
692{
693 int error;
694 unsigned int flags;
695
696 /*
697 * If the user said "noresume".. bail out early.
698 */
699 if (noresume)
700 return 0;
701
702 /*
703 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
704 * is configured into the kernel. Since the regular hibernate
705 * trigger path is via sysfs which takes a buffer mutex before
706 * calling hibernate functions (which take pm_mutex) this can
707 * cause lockdep to complain about a possible ABBA deadlock
708 * which cannot happen since we're in the boot code here and
709 * sysfs can't be invoked yet. Therefore, we use a subclass
710 * here to avoid lockdep complaining.
711 */
712 mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
713
714 if (swsusp_resume_device)
715 goto Check_image;
716
717 if (!strlen(resume_file)) {
718 error = -ENOENT;
719 goto Unlock;
720 }
721
722 pr_debug("PM: Checking hibernation image partition %s\n", resume_file);
723
724 if (resume_delay) {
725 printk(KERN_INFO "Waiting %dsec before reading resume device...\n",
726 resume_delay);
727 ssleep(resume_delay);
728 }
729
730 /* Check if the device is there */
731 swsusp_resume_device = name_to_dev_t(resume_file);
732
733 /*
734 * name_to_dev_t is ineffective to verify parition if resume_file is in
735 * integer format. (e.g. major:minor)
736 */
737 if (isdigit(resume_file[0]) && resume_wait) {
738 int partno;
739 while (!get_gendisk(swsusp_resume_device, &partno))
740 msleep(10);
741 }
742
743 if (!swsusp_resume_device) {
744 /*
745 * Some device discovery might still be in progress; we need
746 * to wait for this to finish.
747 */
748 wait_for_device_probe();
749
750 if (resume_wait) {
751 while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
752 msleep(10);
753 async_synchronize_full();
754 }
755
756 swsusp_resume_device = name_to_dev_t(resume_file);
757 if (!swsusp_resume_device) {
758 error = -ENODEV;
759 goto Unlock;
760 }
761 }
762
763 Check_image:
764 pr_debug("PM: Hibernation image partition %d:%d present\n",
765 MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
766
767 pr_debug("PM: Looking for hibernation image.\n");
768 error = swsusp_check();
769 if (error)
770 goto Unlock;
771
772 /* The snapshot device should not be opened while we're running */
773 if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
774 error = -EBUSY;
775 swsusp_close(FMODE_READ);
776 goto Unlock;
777 }
778
779 pm_prepare_console();
780 error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
781 if (error)
782 goto close_finish;
783
784 error = create_basic_memory_bitmaps();
785 if (error)
786 goto close_finish;
787
788 pr_debug("PM: Preparing processes for restore.\n");
789 error = freeze_processes();
790 if (error) {
791 swsusp_close(FMODE_READ);
792 goto Done;
793 }
794
795 pr_debug("PM: Loading hibernation image.\n");
796
797 error = swsusp_read(&flags);
798 swsusp_close(FMODE_READ);
799 if (!error)
800 hibernation_restore(flags & SF_PLATFORM_MODE);
801
802 printk(KERN_ERR "PM: Failed to load hibernation image, recovering.\n");
803 swsusp_free();
804 thaw_processes();
805 Done:
806 free_basic_memory_bitmaps();
807 Finish:
808 pm_notifier_call_chain(PM_POST_RESTORE);
809 pm_restore_console();
810 atomic_inc(&snapshot_device_available);
811 /* For success case, the suspend path will release the lock */
812 Unlock:
813 mutex_unlock(&pm_mutex);
814 pr_debug("PM: Hibernation image not present or could not be loaded.\n");
815 return error;
816close_finish:
817 swsusp_close(FMODE_READ);
818 goto Finish;
819}
820
821late_initcall(software_resume);
822
823
824static const char * const hibernation_modes[] = {
825 [HIBERNATION_PLATFORM] = "platform",
826 [HIBERNATION_SHUTDOWN] = "shutdown",
827 [HIBERNATION_REBOOT] = "reboot",
828};
829
830/*
831 * /sys/power/disk - Control hibernation mode.
832 *
833 * Hibernation can be handled in several ways. There are a few different ways
834 * to put the system into the sleep state: using the platform driver (e.g. ACPI
835 * or other hibernation_ops), powering it off or rebooting it (for testing
836 * mostly).
837 *
838 * The sysfs file /sys/power/disk provides an interface for selecting the
839 * hibernation mode to use. Reading from this file causes the available modes
840 * to be printed. There are 3 modes that can be supported:
841 *
842 * 'platform'
843 * 'shutdown'
844 * 'reboot'
845 *
846 * If a platform hibernation driver is in use, 'platform' will be supported
847 * and will be used by default. Otherwise, 'shutdown' will be used by default.
848 * The selected option (i.e. the one corresponding to the current value of
849 * hibernation_mode) is enclosed by a square bracket.
850 *
851 * To select a given hibernation mode it is necessary to write the mode's
852 * string representation (as returned by reading from /sys/power/disk) back
853 * into /sys/power/disk.
854 */
855
856static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
857 char *buf)
858{
859 int i;
860 char *start = buf;
861
862 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
863 if (!hibernation_modes[i])
864 continue;
865 switch (i) {
866 case HIBERNATION_SHUTDOWN:
867 case HIBERNATION_REBOOT:
868 break;
869 case HIBERNATION_PLATFORM:
870 if (hibernation_ops)
871 break;
872 /* not a valid mode, continue with loop */
873 continue;
874 }
875 if (i == hibernation_mode)
876 buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
877 else
878 buf += sprintf(buf, "%s ", hibernation_modes[i]);
879 }
880 buf += sprintf(buf, "\n");
881 return buf-start;
882}
883
884static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
885 const char *buf, size_t n)
886{
887 int error = 0;
888 int i;
889 int len;
890 char *p;
891 int mode = HIBERNATION_INVALID;
892
893 p = memchr(buf, '\n', n);
894 len = p ? p - buf : n;
895
896 lock_system_sleep();
897 for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
898 if (len == strlen(hibernation_modes[i])
899 && !strncmp(buf, hibernation_modes[i], len)) {
900 mode = i;
901 break;
902 }
903 }
904 if (mode != HIBERNATION_INVALID) {
905 switch (mode) {
906 case HIBERNATION_SHUTDOWN:
907 case HIBERNATION_REBOOT:
908 hibernation_mode = mode;
909 break;
910 case HIBERNATION_PLATFORM:
911 if (hibernation_ops)
912 hibernation_mode = mode;
913 else
914 error = -EINVAL;
915 }
916 } else
917 error = -EINVAL;
918
919 if (!error)
920 pr_debug("PM: Hibernation mode set to '%s'\n",
921 hibernation_modes[mode]);
922 unlock_system_sleep();
923 return error ? error : n;
924}
925
926power_attr(disk);
927
928static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
929 char *buf)
930{
931 return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
932 MINOR(swsusp_resume_device));
933}
934
935static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
936 const char *buf, size_t n)
937{
938 unsigned int maj, min;
939 dev_t res;
940 int ret = -EINVAL;
941
942 if (sscanf(buf, "%u:%u", &maj, &min) != 2)
943 goto out;
944
945 res = MKDEV(maj,min);
946 if (maj != MAJOR(res) || min != MINOR(res))
947 goto out;
948
949 lock_system_sleep();
950 swsusp_resume_device = res;
951 unlock_system_sleep();
952 printk(KERN_INFO "PM: Starting manual resume from disk\n");
953 noresume = 0;
954 software_resume();
955 ret = n;
956 out:
957 return ret;
958}
959
960power_attr(resume);
961
962static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
963 char *buf)
964{
965 return sprintf(buf, "%lu\n", image_size);
966}
967
968static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
969 const char *buf, size_t n)
970{
971 unsigned long size;
972
973 if (sscanf(buf, "%lu", &size) == 1) {
974 image_size = size;
975 return n;
976 }
977
978 return -EINVAL;
979}
980
981power_attr(image_size);
982
983static ssize_t reserved_size_show(struct kobject *kobj,
984 struct kobj_attribute *attr, char *buf)
985{
986 return sprintf(buf, "%lu\n", reserved_size);
987}
988
989static ssize_t reserved_size_store(struct kobject *kobj,
990 struct kobj_attribute *attr,
991 const char *buf, size_t n)
992{
993 unsigned long size;
994
995 if (sscanf(buf, "%lu", &size) == 1) {
996 reserved_size = size;
997 return n;
998 }
999
1000 return -EINVAL;
1001}
1002
1003power_attr(reserved_size);
1004
1005static struct attribute * g[] = {
1006 &disk_attr.attr,
1007 &resume_attr.attr,
1008 &image_size_attr.attr,
1009 &reserved_size_attr.attr,
1010 NULL,
1011};
1012
1013
1014static struct attribute_group attr_group = {
1015 .attrs = g,
1016};
1017
1018
1019static int __init pm_disk_init(void)
1020{
1021 return sysfs_create_group(power_kobj, &attr_group);
1022}
1023
1024core_initcall(pm_disk_init);
1025
1026
1027static int __init resume_setup(char *str)
1028{
1029 if (noresume)
1030 return 1;
1031
1032 strncpy( resume_file, str, 255 );
1033 return 1;
1034}
1035
1036static int __init resume_offset_setup(char *str)
1037{
1038 unsigned long long offset;
1039
1040 if (noresume)
1041 return 1;
1042
1043 if (sscanf(str, "%llu", &offset) == 1)
1044 swsusp_resume_block = offset;
1045
1046 return 1;
1047}
1048
1049static int __init hibernate_setup(char *str)
1050{
1051 if (!strncmp(str, "noresume", 8))
1052 noresume = 1;
1053 else if (!strncmp(str, "nocompress", 10))
1054 nocompress = 1;
1055 return 1;
1056}
1057
1058static int __init noresume_setup(char *str)
1059{
1060 noresume = 1;
1061 return 1;
1062}
1063
1064static int __init resumewait_setup(char *str)
1065{
1066 resume_wait = 1;
1067 return 1;
1068}
1069
1070static int __init resumedelay_setup(char *str)
1071{
1072 resume_delay = simple_strtoul(str, NULL, 0);
1073 return 1;
1074}
1075
1076__setup("noresume", noresume_setup);
1077__setup("resume_offset=", resume_offset_setup);
1078__setup("resume=", resume_setup);
1079__setup("hibernate=", hibernate_setup);
1080__setup("resumewait", resumewait_setup);
1081__setup("resumedelay=", resumedelay_setup);