Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2013 Fusion IO. All rights reserved.
4 */
5
6#include <linux/slab.h>
7#include "btrfs-tests.h"
8#include "../ctree.h"
9#include "../disk-io.h"
10#include "../free-space-cache.h"
11#include "../block-group.h"
12
13#define BITS_PER_BITMAP (PAGE_SIZE * 8UL)
14
15/*
16 * This test just does basic sanity checking, making sure we can add an extent
17 * entry and remove space from either end and the middle, and make sure we can
18 * remove space that covers adjacent extent entries.
19 */
20static int test_extents(struct btrfs_block_group_cache *cache)
21{
22 int ret = 0;
23
24 test_msg("running extent only tests");
25
26 /* First just make sure we can remove an entire entry */
27 ret = btrfs_add_free_space(cache, 0, SZ_4M);
28 if (ret) {
29 test_err("error adding initial extents %d", ret);
30 return ret;
31 }
32
33 ret = btrfs_remove_free_space(cache, 0, SZ_4M);
34 if (ret) {
35 test_err("error removing extent %d", ret);
36 return ret;
37 }
38
39 if (test_check_exists(cache, 0, SZ_4M)) {
40 test_err("full remove left some lingering space");
41 return -1;
42 }
43
44 /* Ok edge and middle cases now */
45 ret = btrfs_add_free_space(cache, 0, SZ_4M);
46 if (ret) {
47 test_err("error adding half extent %d", ret);
48 return ret;
49 }
50
51 ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_1M);
52 if (ret) {
53 test_err("error removing tail end %d", ret);
54 return ret;
55 }
56
57 ret = btrfs_remove_free_space(cache, 0, SZ_1M);
58 if (ret) {
59 test_err("error removing front end %d", ret);
60 return ret;
61 }
62
63 ret = btrfs_remove_free_space(cache, SZ_2M, 4096);
64 if (ret) {
65 test_err("error removing middle piece %d", ret);
66 return ret;
67 }
68
69 if (test_check_exists(cache, 0, SZ_1M)) {
70 test_err("still have space at the front");
71 return -1;
72 }
73
74 if (test_check_exists(cache, SZ_2M, 4096)) {
75 test_err("still have space in the middle");
76 return -1;
77 }
78
79 if (test_check_exists(cache, 3 * SZ_1M, SZ_1M)) {
80 test_err("still have space at the end");
81 return -1;
82 }
83
84 /* Cleanup */
85 __btrfs_remove_free_space_cache(cache->free_space_ctl);
86
87 return 0;
88}
89
90static int test_bitmaps(struct btrfs_block_group_cache *cache,
91 u32 sectorsize)
92{
93 u64 next_bitmap_offset;
94 int ret;
95
96 test_msg("running bitmap only tests");
97
98 ret = test_add_free_space_entry(cache, 0, SZ_4M, 1);
99 if (ret) {
100 test_err("couldn't create a bitmap entry %d", ret);
101 return ret;
102 }
103
104 ret = btrfs_remove_free_space(cache, 0, SZ_4M);
105 if (ret) {
106 test_err("error removing bitmap full range %d", ret);
107 return ret;
108 }
109
110 if (test_check_exists(cache, 0, SZ_4M)) {
111 test_err("left some space in bitmap");
112 return -1;
113 }
114
115 ret = test_add_free_space_entry(cache, 0, SZ_4M, 1);
116 if (ret) {
117 test_err("couldn't add to our bitmap entry %d", ret);
118 return ret;
119 }
120
121 ret = btrfs_remove_free_space(cache, SZ_1M, SZ_2M);
122 if (ret) {
123 test_err("couldn't remove middle chunk %d", ret);
124 return ret;
125 }
126
127 /*
128 * The first bitmap we have starts at offset 0 so the next one is just
129 * at the end of the first bitmap.
130 */
131 next_bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize);
132
133 /* Test a bit straddling two bitmaps */
134 ret = test_add_free_space_entry(cache, next_bitmap_offset - SZ_2M,
135 SZ_4M, 1);
136 if (ret) {
137 test_err("couldn't add space that straddles two bitmaps %d",
138 ret);
139 return ret;
140 }
141
142 ret = btrfs_remove_free_space(cache, next_bitmap_offset - SZ_1M, SZ_2M);
143 if (ret) {
144 test_err("couldn't remove overlapping space %d", ret);
145 return ret;
146 }
147
148 if (test_check_exists(cache, next_bitmap_offset - SZ_1M, SZ_2M)) {
149 test_err("left some space when removing overlapping");
150 return -1;
151 }
152
153 __btrfs_remove_free_space_cache(cache->free_space_ctl);
154
155 return 0;
156}
157
158/* This is the high grade jackassery */
159static int test_bitmaps_and_extents(struct btrfs_block_group_cache *cache,
160 u32 sectorsize)
161{
162 u64 bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize);
163 int ret;
164
165 test_msg("running bitmap and extent tests");
166
167 /*
168 * First let's do something simple, an extent at the same offset as the
169 * bitmap, but the free space completely in the extent and then
170 * completely in the bitmap.
171 */
172 ret = test_add_free_space_entry(cache, SZ_4M, SZ_1M, 1);
173 if (ret) {
174 test_err("couldn't create bitmap entry %d", ret);
175 return ret;
176 }
177
178 ret = test_add_free_space_entry(cache, 0, SZ_1M, 0);
179 if (ret) {
180 test_err("couldn't add extent entry %d", ret);
181 return ret;
182 }
183
184 ret = btrfs_remove_free_space(cache, 0, SZ_1M);
185 if (ret) {
186 test_err("couldn't remove extent entry %d", ret);
187 return ret;
188 }
189
190 if (test_check_exists(cache, 0, SZ_1M)) {
191 test_err("left remnants after our remove");
192 return -1;
193 }
194
195 /* Now to add back the extent entry and remove from the bitmap */
196 ret = test_add_free_space_entry(cache, 0, SZ_1M, 0);
197 if (ret) {
198 test_err("couldn't re-add extent entry %d", ret);
199 return ret;
200 }
201
202 ret = btrfs_remove_free_space(cache, SZ_4M, SZ_1M);
203 if (ret) {
204 test_err("couldn't remove from bitmap %d", ret);
205 return ret;
206 }
207
208 if (test_check_exists(cache, SZ_4M, SZ_1M)) {
209 test_err("left remnants in the bitmap");
210 return -1;
211 }
212
213 /*
214 * Ok so a little more evil, extent entry and bitmap at the same offset,
215 * removing an overlapping chunk.
216 */
217 ret = test_add_free_space_entry(cache, SZ_1M, SZ_4M, 1);
218 if (ret) {
219 test_err("couldn't add to a bitmap %d", ret);
220 return ret;
221 }
222
223 ret = btrfs_remove_free_space(cache, SZ_512K, 3 * SZ_1M);
224 if (ret) {
225 test_err("couldn't remove overlapping space %d", ret);
226 return ret;
227 }
228
229 if (test_check_exists(cache, SZ_512K, 3 * SZ_1M)) {
230 test_err("left over pieces after removing overlapping");
231 return -1;
232 }
233
234 __btrfs_remove_free_space_cache(cache->free_space_ctl);
235
236 /* Now with the extent entry offset into the bitmap */
237 ret = test_add_free_space_entry(cache, SZ_4M, SZ_4M, 1);
238 if (ret) {
239 test_err("couldn't add space to the bitmap %d", ret);
240 return ret;
241 }
242
243 ret = test_add_free_space_entry(cache, SZ_2M, SZ_2M, 0);
244 if (ret) {
245 test_err("couldn't add extent to the cache %d", ret);
246 return ret;
247 }
248
249 ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_4M);
250 if (ret) {
251 test_err("problem removing overlapping space %d", ret);
252 return ret;
253 }
254
255 if (test_check_exists(cache, 3 * SZ_1M, SZ_4M)) {
256 test_err("left something behind when removing space");
257 return -1;
258 }
259
260 /*
261 * This has blown up in the past, the extent entry starts before the
262 * bitmap entry, but we're trying to remove an offset that falls
263 * completely within the bitmap range and is in both the extent entry
264 * and the bitmap entry, looks like this
265 *
266 * [ extent ]
267 * [ bitmap ]
268 * [ del ]
269 */
270 __btrfs_remove_free_space_cache(cache->free_space_ctl);
271 ret = test_add_free_space_entry(cache, bitmap_offset + SZ_4M, SZ_4M, 1);
272 if (ret) {
273 test_err("couldn't add bitmap %d", ret);
274 return ret;
275 }
276
277 ret = test_add_free_space_entry(cache, bitmap_offset - SZ_1M,
278 5 * SZ_1M, 0);
279 if (ret) {
280 test_err("couldn't add extent entry %d", ret);
281 return ret;
282 }
283
284 ret = btrfs_remove_free_space(cache, bitmap_offset + SZ_1M, 5 * SZ_1M);
285 if (ret) {
286 test_err("failed to free our space %d", ret);
287 return ret;
288 }
289
290 if (test_check_exists(cache, bitmap_offset + SZ_1M, 5 * SZ_1M)) {
291 test_err("left stuff over");
292 return -1;
293 }
294
295 __btrfs_remove_free_space_cache(cache->free_space_ctl);
296
297 /*
298 * This blew up before, we have part of the free space in a bitmap and
299 * then the entirety of the rest of the space in an extent. This used
300 * to return -EAGAIN back from btrfs_remove_extent, make sure this
301 * doesn't happen.
302 */
303 ret = test_add_free_space_entry(cache, SZ_1M, SZ_2M, 1);
304 if (ret) {
305 test_err("couldn't add bitmap entry %d", ret);
306 return ret;
307 }
308
309 ret = test_add_free_space_entry(cache, 3 * SZ_1M, SZ_1M, 0);
310 if (ret) {
311 test_err("couldn't add extent entry %d", ret);
312 return ret;
313 }
314
315 ret = btrfs_remove_free_space(cache, SZ_1M, 3 * SZ_1M);
316 if (ret) {
317 test_err("error removing bitmap and extent overlapping %d", ret);
318 return ret;
319 }
320
321 __btrfs_remove_free_space_cache(cache->free_space_ctl);
322 return 0;
323}
324
325/* Used by test_steal_space_from_bitmap_to_extent(). */
326static bool test_use_bitmap(struct btrfs_free_space_ctl *ctl,
327 struct btrfs_free_space *info)
328{
329 return ctl->free_extents > 0;
330}
331
332/* Used by test_steal_space_from_bitmap_to_extent(). */
333static int
334check_num_extents_and_bitmaps(const struct btrfs_block_group_cache *cache,
335 const int num_extents,
336 const int num_bitmaps)
337{
338 if (cache->free_space_ctl->free_extents != num_extents) {
339 test_err(
340 "incorrect # of extent entries in the cache: %d, expected %d",
341 cache->free_space_ctl->free_extents, num_extents);
342 return -EINVAL;
343 }
344 if (cache->free_space_ctl->total_bitmaps != num_bitmaps) {
345 test_err(
346 "incorrect # of extent entries in the cache: %d, expected %d",
347 cache->free_space_ctl->total_bitmaps, num_bitmaps);
348 return -EINVAL;
349 }
350 return 0;
351}
352
353/* Used by test_steal_space_from_bitmap_to_extent(). */
354static int check_cache_empty(struct btrfs_block_group_cache *cache)
355{
356 u64 offset;
357 u64 max_extent_size;
358
359 /*
360 * Now lets confirm that there's absolutely no free space left to
361 * allocate.
362 */
363 if (cache->free_space_ctl->free_space != 0) {
364 test_err("cache free space is not 0");
365 return -EINVAL;
366 }
367
368 /* And any allocation request, no matter how small, should fail now. */
369 offset = btrfs_find_space_for_alloc(cache, 0, 4096, 0,
370 &max_extent_size);
371 if (offset != 0) {
372 test_err("space allocation did not fail, returned offset: %llu",
373 offset);
374 return -EINVAL;
375 }
376
377 /* And no extent nor bitmap entries in the cache anymore. */
378 return check_num_extents_and_bitmaps(cache, 0, 0);
379}
380
381/*
382 * Before we were able to steal free space from a bitmap entry to an extent
383 * entry, we could end up with 2 entries representing a contiguous free space.
384 * One would be an extent entry and the other a bitmap entry. Since in order
385 * to allocate space to a caller we use only 1 entry, we couldn't return that
386 * whole range to the caller if it was requested. This forced the caller to
387 * either assume ENOSPC or perform several smaller space allocations, which
388 * wasn't optimal as they could be spread all over the block group while under
389 * concurrency (extra overhead and fragmentation).
390 *
391 * This stealing approach is beneficial, since we always prefer to allocate
392 * from extent entries, both for clustered and non-clustered allocation
393 * requests.
394 */
395static int
396test_steal_space_from_bitmap_to_extent(struct btrfs_block_group_cache *cache,
397 u32 sectorsize)
398{
399 int ret;
400 u64 offset;
401 u64 max_extent_size;
402 const struct btrfs_free_space_op test_free_space_ops = {
403 .recalc_thresholds = cache->free_space_ctl->op->recalc_thresholds,
404 .use_bitmap = test_use_bitmap,
405 };
406 const struct btrfs_free_space_op *orig_free_space_ops;
407
408 test_msg("running space stealing from bitmap to extent tests");
409
410 /*
411 * For this test, we want to ensure we end up with an extent entry
412 * immediately adjacent to a bitmap entry, where the bitmap starts
413 * at an offset where the extent entry ends. We keep adding and
414 * removing free space to reach into this state, but to get there
415 * we need to reach a point where marking new free space doesn't
416 * result in adding new extent entries or merging the new space
417 * with existing extent entries - the space ends up being marked
418 * in an existing bitmap that covers the new free space range.
419 *
420 * To get there, we need to reach the threshold defined set at
421 * cache->free_space_ctl->extents_thresh, which currently is
422 * 256 extents on a x86_64 system at least, and a few other
423 * conditions (check free_space_cache.c). Instead of making the
424 * test much longer and complicated, use a "use_bitmap" operation
425 * that forces use of bitmaps as soon as we have at least 1
426 * extent entry.
427 */
428 orig_free_space_ops = cache->free_space_ctl->op;
429 cache->free_space_ctl->op = &test_free_space_ops;
430
431 /*
432 * Extent entry covering free space range [128Mb - 256Kb, 128Mb - 128Kb[
433 */
434 ret = test_add_free_space_entry(cache, SZ_128M - SZ_256K, SZ_128K, 0);
435 if (ret) {
436 test_err("couldn't add extent entry %d", ret);
437 return ret;
438 }
439
440 /* Bitmap entry covering free space range [128Mb + 512Kb, 256Mb[ */
441 ret = test_add_free_space_entry(cache, SZ_128M + SZ_512K,
442 SZ_128M - SZ_512K, 1);
443 if (ret) {
444 test_err("couldn't add bitmap entry %d", ret);
445 return ret;
446 }
447
448 ret = check_num_extents_and_bitmaps(cache, 2, 1);
449 if (ret)
450 return ret;
451
452 /*
453 * Now make only the first 256Kb of the bitmap marked as free, so that
454 * we end up with only the following ranges marked as free space:
455 *
456 * [128Mb - 256Kb, 128Mb - 128Kb[
457 * [128Mb + 512Kb, 128Mb + 768Kb[
458 */
459 ret = btrfs_remove_free_space(cache,
460 SZ_128M + 768 * SZ_1K,
461 SZ_128M - 768 * SZ_1K);
462 if (ret) {
463 test_err("failed to free part of bitmap space %d", ret);
464 return ret;
465 }
466
467 /* Confirm that only those 2 ranges are marked as free. */
468 if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_128K)) {
469 test_err("free space range missing");
470 return -ENOENT;
471 }
472 if (!test_check_exists(cache, SZ_128M + SZ_512K, SZ_256K)) {
473 test_err("free space range missing");
474 return -ENOENT;
475 }
476
477 /*
478 * Confirm that the bitmap range [128Mb + 768Kb, 256Mb[ isn't marked
479 * as free anymore.
480 */
481 if (test_check_exists(cache, SZ_128M + 768 * SZ_1K,
482 SZ_128M - 768 * SZ_1K)) {
483 test_err("bitmap region not removed from space cache");
484 return -EINVAL;
485 }
486
487 /*
488 * Confirm that the region [128Mb + 256Kb, 128Mb + 512Kb[, which is
489 * covered by the bitmap, isn't marked as free.
490 */
491 if (test_check_exists(cache, SZ_128M + SZ_256K, SZ_256K)) {
492 test_err("invalid bitmap region marked as free");
493 return -EINVAL;
494 }
495
496 /*
497 * Confirm that the region [128Mb, 128Mb + 256Kb[, which is covered
498 * by the bitmap too, isn't marked as free either.
499 */
500 if (test_check_exists(cache, SZ_128M, SZ_256K)) {
501 test_err("invalid bitmap region marked as free");
502 return -EINVAL;
503 }
504
505 /*
506 * Now lets mark the region [128Mb, 128Mb + 512Kb[ as free too. But,
507 * lets make sure the free space cache marks it as free in the bitmap,
508 * and doesn't insert a new extent entry to represent this region.
509 */
510 ret = btrfs_add_free_space(cache, SZ_128M, SZ_512K);
511 if (ret) {
512 test_err("error adding free space: %d", ret);
513 return ret;
514 }
515 /* Confirm the region is marked as free. */
516 if (!test_check_exists(cache, SZ_128M, SZ_512K)) {
517 test_err("bitmap region not marked as free");
518 return -ENOENT;
519 }
520
521 /*
522 * Confirm that no new extent entries or bitmap entries were added to
523 * the cache after adding that free space region.
524 */
525 ret = check_num_extents_and_bitmaps(cache, 2, 1);
526 if (ret)
527 return ret;
528
529 /*
530 * Now lets add a small free space region to the right of the previous
531 * one, which is not contiguous with it and is part of the bitmap too.
532 * The goal is to test that the bitmap entry space stealing doesn't
533 * steal this space region.
534 */
535 ret = btrfs_add_free_space(cache, SZ_128M + SZ_16M, sectorsize);
536 if (ret) {
537 test_err("error adding free space: %d", ret);
538 return ret;
539 }
540
541 /*
542 * Confirm that no new extent entries or bitmap entries were added to
543 * the cache after adding that free space region.
544 */
545 ret = check_num_extents_and_bitmaps(cache, 2, 1);
546 if (ret)
547 return ret;
548
549 /*
550 * Now mark the region [128Mb - 128Kb, 128Mb[ as free too. This will
551 * expand the range covered by the existing extent entry that represents
552 * the free space [128Mb - 256Kb, 128Mb - 128Kb[.
553 */
554 ret = btrfs_add_free_space(cache, SZ_128M - SZ_128K, SZ_128K);
555 if (ret) {
556 test_err("error adding free space: %d", ret);
557 return ret;
558 }
559 /* Confirm the region is marked as free. */
560 if (!test_check_exists(cache, SZ_128M - SZ_128K, SZ_128K)) {
561 test_err("extent region not marked as free");
562 return -ENOENT;
563 }
564
565 /*
566 * Confirm that our extent entry didn't stole all free space from the
567 * bitmap, because of the small 4Kb free space region.
568 */
569 ret = check_num_extents_and_bitmaps(cache, 2, 1);
570 if (ret)
571 return ret;
572
573 /*
574 * So now we have the range [128Mb - 256Kb, 128Mb + 768Kb[ as free
575 * space. Without stealing bitmap free space into extent entry space,
576 * we would have all this free space represented by 2 entries in the
577 * cache:
578 *
579 * extent entry covering range: [128Mb - 256Kb, 128Mb[
580 * bitmap entry covering range: [128Mb, 128Mb + 768Kb[
581 *
582 * Attempting to allocate the whole free space (1Mb) would fail, because
583 * we can't allocate from multiple entries.
584 * With the bitmap free space stealing, we get a single extent entry
585 * that represents the 1Mb free space, and therefore we're able to
586 * allocate the whole free space at once.
587 */
588 if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_1M)) {
589 test_err("expected region not marked as free");
590 return -ENOENT;
591 }
592
593 if (cache->free_space_ctl->free_space != (SZ_1M + sectorsize)) {
594 test_err("cache free space is not 1Mb + %u", sectorsize);
595 return -EINVAL;
596 }
597
598 offset = btrfs_find_space_for_alloc(cache,
599 0, SZ_1M, 0,
600 &max_extent_size);
601 if (offset != (SZ_128M - SZ_256K)) {
602 test_err(
603 "failed to allocate 1Mb from space cache, returned offset is: %llu",
604 offset);
605 return -EINVAL;
606 }
607
608 /*
609 * All that remains is a sectorsize free space region in a bitmap.
610 * Confirm.
611 */
612 ret = check_num_extents_and_bitmaps(cache, 1, 1);
613 if (ret)
614 return ret;
615
616 if (cache->free_space_ctl->free_space != sectorsize) {
617 test_err("cache free space is not %u", sectorsize);
618 return -EINVAL;
619 }
620
621 offset = btrfs_find_space_for_alloc(cache,
622 0, sectorsize, 0,
623 &max_extent_size);
624 if (offset != (SZ_128M + SZ_16M)) {
625 test_err("failed to allocate %u, returned offset : %llu",
626 sectorsize, offset);
627 return -EINVAL;
628 }
629
630 ret = check_cache_empty(cache);
631 if (ret)
632 return ret;
633
634 __btrfs_remove_free_space_cache(cache->free_space_ctl);
635
636 /*
637 * Now test a similar scenario, but where our extent entry is located
638 * to the right of the bitmap entry, so that we can check that stealing
639 * space from a bitmap to the front of an extent entry works.
640 */
641
642 /*
643 * Extent entry covering free space range [128Mb + 128Kb, 128Mb + 256Kb[
644 */
645 ret = test_add_free_space_entry(cache, SZ_128M + SZ_128K, SZ_128K, 0);
646 if (ret) {
647 test_err("couldn't add extent entry %d", ret);
648 return ret;
649 }
650
651 /* Bitmap entry covering free space range [0, 128Mb - 512Kb[ */
652 ret = test_add_free_space_entry(cache, 0, SZ_128M - SZ_512K, 1);
653 if (ret) {
654 test_err("couldn't add bitmap entry %d", ret);
655 return ret;
656 }
657
658 ret = check_num_extents_and_bitmaps(cache, 2, 1);
659 if (ret)
660 return ret;
661
662 /*
663 * Now make only the last 256Kb of the bitmap marked as free, so that
664 * we end up with only the following ranges marked as free space:
665 *
666 * [128Mb + 128b, 128Mb + 256Kb[
667 * [128Mb - 768Kb, 128Mb - 512Kb[
668 */
669 ret = btrfs_remove_free_space(cache, 0, SZ_128M - 768 * SZ_1K);
670 if (ret) {
671 test_err("failed to free part of bitmap space %d", ret);
672 return ret;
673 }
674
675 /* Confirm that only those 2 ranges are marked as free. */
676 if (!test_check_exists(cache, SZ_128M + SZ_128K, SZ_128K)) {
677 test_err("free space range missing");
678 return -ENOENT;
679 }
680 if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_256K)) {
681 test_err("free space range missing");
682 return -ENOENT;
683 }
684
685 /*
686 * Confirm that the bitmap range [0, 128Mb - 768Kb[ isn't marked
687 * as free anymore.
688 */
689 if (test_check_exists(cache, 0, SZ_128M - 768 * SZ_1K)) {
690 test_err("bitmap region not removed from space cache");
691 return -EINVAL;
692 }
693
694 /*
695 * Confirm that the region [128Mb - 512Kb, 128Mb[, which is
696 * covered by the bitmap, isn't marked as free.
697 */
698 if (test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) {
699 test_err("invalid bitmap region marked as free");
700 return -EINVAL;
701 }
702
703 /*
704 * Now lets mark the region [128Mb - 512Kb, 128Mb[ as free too. But,
705 * lets make sure the free space cache marks it as free in the bitmap,
706 * and doesn't insert a new extent entry to represent this region.
707 */
708 ret = btrfs_add_free_space(cache, SZ_128M - SZ_512K, SZ_512K);
709 if (ret) {
710 test_err("error adding free space: %d", ret);
711 return ret;
712 }
713 /* Confirm the region is marked as free. */
714 if (!test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) {
715 test_err("bitmap region not marked as free");
716 return -ENOENT;
717 }
718
719 /*
720 * Confirm that no new extent entries or bitmap entries were added to
721 * the cache after adding that free space region.
722 */
723 ret = check_num_extents_and_bitmaps(cache, 2, 1);
724 if (ret)
725 return ret;
726
727 /*
728 * Now lets add a small free space region to the left of the previous
729 * one, which is not contiguous with it and is part of the bitmap too.
730 * The goal is to test that the bitmap entry space stealing doesn't
731 * steal this space region.
732 */
733 ret = btrfs_add_free_space(cache, SZ_32M, 2 * sectorsize);
734 if (ret) {
735 test_err("error adding free space: %d", ret);
736 return ret;
737 }
738
739 /*
740 * Now mark the region [128Mb, 128Mb + 128Kb[ as free too. This will
741 * expand the range covered by the existing extent entry that represents
742 * the free space [128Mb + 128Kb, 128Mb + 256Kb[.
743 */
744 ret = btrfs_add_free_space(cache, SZ_128M, SZ_128K);
745 if (ret) {
746 test_err("error adding free space: %d", ret);
747 return ret;
748 }
749 /* Confirm the region is marked as free. */
750 if (!test_check_exists(cache, SZ_128M, SZ_128K)) {
751 test_err("extent region not marked as free");
752 return -ENOENT;
753 }
754
755 /*
756 * Confirm that our extent entry didn't stole all free space from the
757 * bitmap, because of the small 2 * sectorsize free space region.
758 */
759 ret = check_num_extents_and_bitmaps(cache, 2, 1);
760 if (ret)
761 return ret;
762
763 /*
764 * So now we have the range [128Mb - 768Kb, 128Mb + 256Kb[ as free
765 * space. Without stealing bitmap free space into extent entry space,
766 * we would have all this free space represented by 2 entries in the
767 * cache:
768 *
769 * extent entry covering range: [128Mb, 128Mb + 256Kb[
770 * bitmap entry covering range: [128Mb - 768Kb, 128Mb[
771 *
772 * Attempting to allocate the whole free space (1Mb) would fail, because
773 * we can't allocate from multiple entries.
774 * With the bitmap free space stealing, we get a single extent entry
775 * that represents the 1Mb free space, and therefore we're able to
776 * allocate the whole free space at once.
777 */
778 if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_1M)) {
779 test_err("expected region not marked as free");
780 return -ENOENT;
781 }
782
783 if (cache->free_space_ctl->free_space != (SZ_1M + 2 * sectorsize)) {
784 test_err("cache free space is not 1Mb + %u", 2 * sectorsize);
785 return -EINVAL;
786 }
787
788 offset = btrfs_find_space_for_alloc(cache, 0, SZ_1M, 0,
789 &max_extent_size);
790 if (offset != (SZ_128M - 768 * SZ_1K)) {
791 test_err(
792 "failed to allocate 1Mb from space cache, returned offset is: %llu",
793 offset);
794 return -EINVAL;
795 }
796
797 /*
798 * All that remains is 2 * sectorsize free space region
799 * in a bitmap. Confirm.
800 */
801 ret = check_num_extents_and_bitmaps(cache, 1, 1);
802 if (ret)
803 return ret;
804
805 if (cache->free_space_ctl->free_space != 2 * sectorsize) {
806 test_err("cache free space is not %u", 2 * sectorsize);
807 return -EINVAL;
808 }
809
810 offset = btrfs_find_space_for_alloc(cache,
811 0, 2 * sectorsize, 0,
812 &max_extent_size);
813 if (offset != SZ_32M) {
814 test_err("failed to allocate %u, offset: %llu",
815 2 * sectorsize, offset);
816 return -EINVAL;
817 }
818
819 ret = check_cache_empty(cache);
820 if (ret)
821 return ret;
822
823 cache->free_space_ctl->op = orig_free_space_ops;
824 __btrfs_remove_free_space_cache(cache->free_space_ctl);
825
826 return 0;
827}
828
829int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize)
830{
831 struct btrfs_fs_info *fs_info;
832 struct btrfs_block_group_cache *cache;
833 struct btrfs_root *root = NULL;
834 int ret = -ENOMEM;
835
836 test_msg("running btrfs free space cache tests");
837 fs_info = btrfs_alloc_dummy_fs_info(nodesize, sectorsize);
838 if (!fs_info) {
839 test_std_err(TEST_ALLOC_FS_INFO);
840 return -ENOMEM;
841 }
842
843 /*
844 * For ppc64 (with 64k page size), bytes per bitmap might be
845 * larger than 1G. To make bitmap test available in ppc64,
846 * alloc dummy block group whose size cross bitmaps.
847 */
848 cache = btrfs_alloc_dummy_block_group(fs_info,
849 BITS_PER_BITMAP * sectorsize + PAGE_SIZE);
850 if (!cache) {
851 test_std_err(TEST_ALLOC_BLOCK_GROUP);
852 btrfs_free_dummy_fs_info(fs_info);
853 return 0;
854 }
855
856 root = btrfs_alloc_dummy_root(fs_info);
857 if (IS_ERR(root)) {
858 test_std_err(TEST_ALLOC_ROOT);
859 ret = PTR_ERR(root);
860 goto out;
861 }
862
863 root->fs_info->extent_root = root;
864
865 ret = test_extents(cache);
866 if (ret)
867 goto out;
868 ret = test_bitmaps(cache, sectorsize);
869 if (ret)
870 goto out;
871 ret = test_bitmaps_and_extents(cache, sectorsize);
872 if (ret)
873 goto out;
874
875 ret = test_steal_space_from_bitmap_to_extent(cache, sectorsize);
876out:
877 btrfs_free_dummy_block_group(cache);
878 btrfs_free_dummy_root(root);
879 btrfs_free_dummy_fs_info(fs_info);
880 return ret;
881}