Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.5.6.
  1// SPDX-License-Identifier: GPL-2.0
  2/dts-v1/;
  3
  4#include <dt-bindings/gpio/gpio.h>
  5#include <dt-bindings/input/input.h>
  6
  7#include "ar9132.dtsi"
  8
  9/ {
 10	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
 11	model = "TP-Link TL-WR1043ND Version 1";
 12
 13	memory@0 {
 14		device_type = "memory";
 15		reg = <0x0 0x2000000>;
 16	};
 17
 18	extosc: ref {
 19		compatible = "fixed-clock";
 20		#clock-cells = <0>;
 21		clock-frequency = <40000000>;
 22	};
 23
 24	gpio-keys {
 25		compatible = "gpio-keys";
 26		#address-cells = <1>;
 27		#size-cells = <0>;
 28
 29		button@0 {
 30			label = "reset";
 31			linux,code = <KEY_RESTART>;
 32			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 33			debounce-interval = <60>;
 34		};
 35
 36		button@1 {
 37			label = "qss";
 38			linux,code = <KEY_WPS_BUTTON>;
 39			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 40			debounce-interval = <60>;
 41		};
 42	};
 43
 44	leds {
 45		compatible = "gpio-leds";
 46		led@0 {
 47			label = "tp-link:green:usb";
 48			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 49		};
 50
 51		led@1 {
 52			label = "tp-link:green:system";
 53			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 54			linux,default-trigger = "heartbeat";
 55		};
 56
 57		led@2 {
 58			label = "tp-link:green:qss";
 59			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 60		};
 61
 62		led@3 {
 63			label = "tp-link:green:wlan";
 64			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 65		};
 66	};
 67};
 68
 69&uart {
 70	status = "okay";
 71};
 72
 73&pll {
 74	clocks = <&extosc>;
 75};
 76
 77&usb {
 78	status = "okay";
 79};
 80
 81&usb_phy {
 82	status = "okay";
 83};
 84
 85&spi {
 86	status = "okay";
 87	num-cs = <1>;
 88
 89	flash@0 {
 90		#address-cells = <1>;
 91		#size-cells = <1>;
 92		compatible = "s25sl064a";
 93		reg = <0>;
 94		spi-max-frequency = <25000000>;
 95
 96		partition@0 {
 97			label = "u-boot";
 98			reg = <0x000000 0x020000>;
 99		};
100
101		partition@1 {
102			label = "firmware";
103			reg = <0x020000 0x7D0000>;
104		};
105
106		partition@2 {
107			label = "art";
108			reg = <0x7F0000 0x010000>;
109			read-only;
110		};
111	};
112};