Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Driver for Digigram VX222 V2/Mic soundcards
4 *
5 * VX222-specific low-level routines
6 *
7 * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
8 */
9
10#include <linux/delay.h>
11#include <linux/device.h>
12#include <linux/firmware.h>
13#include <linux/mutex.h>
14#include <linux/io.h>
15
16#include <sound/core.h>
17#include <sound/control.h>
18#include <sound/tlv.h>
19#include "vx222.h"
20
21
22static int vx2_reg_offset[VX_REG_MAX] = {
23 [VX_ICR] = 0x00,
24 [VX_CVR] = 0x04,
25 [VX_ISR] = 0x08,
26 [VX_IVR] = 0x0c,
27 [VX_RXH] = 0x14,
28 [VX_RXM] = 0x18,
29 [VX_RXL] = 0x1c,
30 [VX_DMA] = 0x10,
31 [VX_CDSP] = 0x20,
32 [VX_CFG] = 0x24,
33 [VX_RUER] = 0x28,
34 [VX_DATA] = 0x2c,
35 [VX_STATUS] = 0x30,
36 [VX_LOFREQ] = 0x34,
37 [VX_HIFREQ] = 0x38,
38 [VX_CSUER] = 0x3c,
39 [VX_SELMIC] = 0x40,
40 [VX_COMPOT] = 0x44, // Write: POTENTIOMETER ; Read: COMPRESSION LEVEL activate
41 [VX_SCOMPR] = 0x48, // Read: COMPRESSION THRESHOLD activate
42 [VX_GLIMIT] = 0x4c, // Read: LEVEL LIMITATION activate
43 [VX_INTCSR] = 0x4c, // VX_INTCSR_REGISTER_OFFSET
44 [VX_CNTRL] = 0x50, // VX_CNTRL_REGISTER_OFFSET
45 [VX_GPIOC] = 0x54, // VX_GPIOC (new with PLX9030)
46};
47
48static int vx2_reg_index[VX_REG_MAX] = {
49 [VX_ICR] = 1,
50 [VX_CVR] = 1,
51 [VX_ISR] = 1,
52 [VX_IVR] = 1,
53 [VX_RXH] = 1,
54 [VX_RXM] = 1,
55 [VX_RXL] = 1,
56 [VX_DMA] = 1,
57 [VX_CDSP] = 1,
58 [VX_CFG] = 1,
59 [VX_RUER] = 1,
60 [VX_DATA] = 1,
61 [VX_STATUS] = 1,
62 [VX_LOFREQ] = 1,
63 [VX_HIFREQ] = 1,
64 [VX_CSUER] = 1,
65 [VX_SELMIC] = 1,
66 [VX_COMPOT] = 1,
67 [VX_SCOMPR] = 1,
68 [VX_GLIMIT] = 1,
69 [VX_INTCSR] = 0, /* on the PLX */
70 [VX_CNTRL] = 0, /* on the PLX */
71 [VX_GPIOC] = 0, /* on the PLX */
72};
73
74static inline unsigned long vx2_reg_addr(struct vx_core *_chip, int reg)
75{
76 struct snd_vx222 *chip = to_vx222(_chip);
77 return chip->port[vx2_reg_index[reg]] + vx2_reg_offset[reg];
78}
79
80/**
81 * snd_vx_inb - read a byte from the register
82 * @chip: VX core instance
83 * @offset: register enum
84 */
85static unsigned char vx2_inb(struct vx_core *chip, int offset)
86{
87 return inb(vx2_reg_addr(chip, offset));
88}
89
90/**
91 * snd_vx_outb - write a byte on the register
92 * @chip: VX core instance
93 * @offset: the register offset
94 * @val: the value to write
95 */
96static void vx2_outb(struct vx_core *chip, int offset, unsigned char val)
97{
98 outb(val, vx2_reg_addr(chip, offset));
99 /*
100 dev_dbg(chip->card->dev, "outb: %x -> %x\n", val, vx2_reg_addr(chip, offset));
101 */
102}
103
104/**
105 * snd_vx_inl - read a 32bit word from the register
106 * @chip: VX core instance
107 * @offset: register enum
108 */
109static unsigned int vx2_inl(struct vx_core *chip, int offset)
110{
111 return inl(vx2_reg_addr(chip, offset));
112}
113
114/**
115 * snd_vx_outl - write a 32bit word on the register
116 * @chip: VX core instance
117 * @offset: the register enum
118 * @val: the value to write
119 */
120static void vx2_outl(struct vx_core *chip, int offset, unsigned int val)
121{
122 /*
123 dev_dbg(chip->card->dev, "outl: %x -> %x\n", val, vx2_reg_addr(chip, offset));
124 */
125 outl(val, vx2_reg_addr(chip, offset));
126}
127
128/*
129 * redefine macros to call directly
130 */
131#undef vx_inb
132#define vx_inb(chip,reg) vx2_inb((struct vx_core*)(chip), VX_##reg)
133#undef vx_outb
134#define vx_outb(chip,reg,val) vx2_outb((struct vx_core*)(chip), VX_##reg, val)
135#undef vx_inl
136#define vx_inl(chip,reg) vx2_inl((struct vx_core*)(chip), VX_##reg)
137#undef vx_outl
138#define vx_outl(chip,reg,val) vx2_outl((struct vx_core*)(chip), VX_##reg, val)
139
140
141/*
142 * vx_reset_dsp - reset the DSP
143 */
144
145#define XX_DSP_RESET_WAIT_TIME 2 /* ms */
146
147static void vx2_reset_dsp(struct vx_core *_chip)
148{
149 struct snd_vx222 *chip = to_vx222(_chip);
150
151 /* set the reset dsp bit to 0 */
152 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_DSP_RESET_MASK);
153
154 mdelay(XX_DSP_RESET_WAIT_TIME);
155
156 chip->regCDSP |= VX_CDSP_DSP_RESET_MASK;
157 /* set the reset dsp bit to 1 */
158 vx_outl(chip, CDSP, chip->regCDSP);
159}
160
161
162static int vx2_test_xilinx(struct vx_core *_chip)
163{
164 struct snd_vx222 *chip = to_vx222(_chip);
165 unsigned int data;
166
167 dev_dbg(_chip->card->dev, "testing xilinx...\n");
168 /* This test uses several write/read sequences on TEST0 and TEST1 bits
169 * to figure out whever or not the xilinx was correctly loaded
170 */
171
172 /* We write 1 on CDSP.TEST0. We should get 0 on STATUS.TEST0. */
173 vx_outl(chip, CDSP, chip->regCDSP | VX_CDSP_TEST0_MASK);
174 vx_inl(chip, ISR);
175 data = vx_inl(chip, STATUS);
176 if ((data & VX_STATUS_VAL_TEST0_MASK) == VX_STATUS_VAL_TEST0_MASK) {
177 dev_dbg(_chip->card->dev, "bad!\n");
178 return -ENODEV;
179 }
180
181 /* We write 0 on CDSP.TEST0. We should get 1 on STATUS.TEST0. */
182 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_TEST0_MASK);
183 vx_inl(chip, ISR);
184 data = vx_inl(chip, STATUS);
185 if (! (data & VX_STATUS_VAL_TEST0_MASK)) {
186 dev_dbg(_chip->card->dev, "bad! #2\n");
187 return -ENODEV;
188 }
189
190 if (_chip->type == VX_TYPE_BOARD) {
191 /* not implemented on VX_2_BOARDS */
192 /* We write 1 on CDSP.TEST1. We should get 0 on STATUS.TEST1. */
193 vx_outl(chip, CDSP, chip->regCDSP | VX_CDSP_TEST1_MASK);
194 vx_inl(chip, ISR);
195 data = vx_inl(chip, STATUS);
196 if ((data & VX_STATUS_VAL_TEST1_MASK) == VX_STATUS_VAL_TEST1_MASK) {
197 dev_dbg(_chip->card->dev, "bad! #3\n");
198 return -ENODEV;
199 }
200
201 /* We write 0 on CDSP.TEST1. We should get 1 on STATUS.TEST1. */
202 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_TEST1_MASK);
203 vx_inl(chip, ISR);
204 data = vx_inl(chip, STATUS);
205 if (! (data & VX_STATUS_VAL_TEST1_MASK)) {
206 dev_dbg(_chip->card->dev, "bad! #4\n");
207 return -ENODEV;
208 }
209 }
210 dev_dbg(_chip->card->dev, "ok, xilinx fine.\n");
211 return 0;
212}
213
214
215/**
216 * vx_setup_pseudo_dma - set up the pseudo dma read/write mode.
217 * @chip: VX core instance
218 * @do_write: 0 = read, 1 = set up for DMA write
219 */
220static void vx2_setup_pseudo_dma(struct vx_core *chip, int do_write)
221{
222 /* Interrupt mode and HREQ pin enabled for host transmit data transfers
223 * (in case of the use of the pseudo-dma facility).
224 */
225 vx_outl(chip, ICR, do_write ? ICR_TREQ : ICR_RREQ);
226
227 /* Reset the pseudo-dma register (in case of the use of the
228 * pseudo-dma facility).
229 */
230 vx_outl(chip, RESET_DMA, 0);
231}
232
233/*
234 * vx_release_pseudo_dma - disable the pseudo-DMA mode
235 */
236static inline void vx2_release_pseudo_dma(struct vx_core *chip)
237{
238 /* HREQ pin disabled. */
239 vx_outl(chip, ICR, 0);
240}
241
242
243
244/* pseudo-dma write */
245static void vx2_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime,
246 struct vx_pipe *pipe, int count)
247{
248 unsigned long port = vx2_reg_addr(chip, VX_DMA);
249 int offset = pipe->hw_ptr;
250 u32 *addr = (u32 *)(runtime->dma_area + offset);
251
252 if (snd_BUG_ON(count % 4))
253 return;
254
255 vx2_setup_pseudo_dma(chip, 1);
256
257 /* Transfer using pseudo-dma.
258 */
259 if (offset + count >= pipe->buffer_bytes) {
260 int length = pipe->buffer_bytes - offset;
261 count -= length;
262 length >>= 2; /* in 32bit words */
263 /* Transfer using pseudo-dma. */
264 for (; length > 0; length--) {
265 outl(*addr, port);
266 addr++;
267 }
268 addr = (u32 *)runtime->dma_area;
269 pipe->hw_ptr = 0;
270 }
271 pipe->hw_ptr += count;
272 count >>= 2; /* in 32bit words */
273 /* Transfer using pseudo-dma. */
274 for (; count > 0; count--) {
275 outl(*addr, port);
276 addr++;
277 }
278
279 vx2_release_pseudo_dma(chip);
280}
281
282
283/* pseudo dma read */
284static void vx2_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime,
285 struct vx_pipe *pipe, int count)
286{
287 int offset = pipe->hw_ptr;
288 u32 *addr = (u32 *)(runtime->dma_area + offset);
289 unsigned long port = vx2_reg_addr(chip, VX_DMA);
290
291 if (snd_BUG_ON(count % 4))
292 return;
293
294 vx2_setup_pseudo_dma(chip, 0);
295 /* Transfer using pseudo-dma.
296 */
297 if (offset + count >= pipe->buffer_bytes) {
298 int length = pipe->buffer_bytes - offset;
299 count -= length;
300 length >>= 2; /* in 32bit words */
301 /* Transfer using pseudo-dma. */
302 for (; length > 0; length--)
303 *addr++ = inl(port);
304 addr = (u32 *)runtime->dma_area;
305 pipe->hw_ptr = 0;
306 }
307 pipe->hw_ptr += count;
308 count >>= 2; /* in 32bit words */
309 /* Transfer using pseudo-dma. */
310 for (; count > 0; count--)
311 *addr++ = inl(port);
312
313 vx2_release_pseudo_dma(chip);
314}
315
316#define VX_XILINX_RESET_MASK 0x40000000
317#define VX_USERBIT0_MASK 0x00000004
318#define VX_USERBIT1_MASK 0x00000020
319#define VX_CNTRL_REGISTER_VALUE 0x00172012
320
321/*
322 * transfer counts bits to PLX
323 */
324static int put_xilinx_data(struct vx_core *chip, unsigned int port, unsigned int counts, unsigned char data)
325{
326 unsigned int i;
327
328 for (i = 0; i < counts; i++) {
329 unsigned int val;
330
331 /* set the clock bit to 0. */
332 val = VX_CNTRL_REGISTER_VALUE & ~VX_USERBIT0_MASK;
333 vx2_outl(chip, port, val);
334 vx2_inl(chip, port);
335 udelay(1);
336
337 if (data & (1 << i))
338 val |= VX_USERBIT1_MASK;
339 else
340 val &= ~VX_USERBIT1_MASK;
341 vx2_outl(chip, port, val);
342 vx2_inl(chip, port);
343
344 /* set the clock bit to 1. */
345 val |= VX_USERBIT0_MASK;
346 vx2_outl(chip, port, val);
347 vx2_inl(chip, port);
348 udelay(1);
349 }
350 return 0;
351}
352
353/*
354 * load the xilinx image
355 */
356static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *xilinx)
357{
358 unsigned int i;
359 unsigned int port;
360 const unsigned char *image;
361
362 /* XILINX reset (wait at least 1 millisecond between reset on and off). */
363 vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
364 vx_inl(chip, CNTRL);
365 msleep(10);
366 vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE);
367 vx_inl(chip, CNTRL);
368 msleep(10);
369
370 if (chip->type == VX_TYPE_BOARD)
371 port = VX_CNTRL;
372 else
373 port = VX_GPIOC; /* VX222 V2 and VX222_MIC_BOARD with new PLX9030 use this register */
374
375 image = xilinx->data;
376 for (i = 0; i < xilinx->size; i++, image++) {
377 if (put_xilinx_data(chip, port, 8, *image) < 0)
378 return -EINVAL;
379 /* don't take too much time in this loop... */
380 cond_resched();
381 }
382 put_xilinx_data(chip, port, 4, 0xff); /* end signature */
383
384 msleep(200);
385
386 /* test after loading (is buggy with VX222) */
387 if (chip->type != VX_TYPE_BOARD) {
388 /* Test if load successful: test bit 8 of register GPIOC (VX222: use CNTRL) ! */
389 i = vx_inl(chip, GPIOC);
390 if (i & 0x0100)
391 return 0;
392 dev_err(chip->card->dev,
393 "xilinx test failed after load, GPIOC=0x%x\n", i);
394 return -EINVAL;
395 }
396
397 return 0;
398}
399
400
401/*
402 * load the boot/dsp images
403 */
404static int vx2_load_dsp(struct vx_core *vx, int index, const struct firmware *dsp)
405{
406 int err;
407
408 switch (index) {
409 case 1:
410 /* xilinx image */
411 if ((err = vx2_load_xilinx_binary(vx, dsp)) < 0)
412 return err;
413 if ((err = vx2_test_xilinx(vx)) < 0)
414 return err;
415 return 0;
416 case 2:
417 /* DSP boot */
418 return snd_vx_dsp_boot(vx, dsp);
419 case 3:
420 /* DSP image */
421 return snd_vx_dsp_load(vx, dsp);
422 default:
423 snd_BUG();
424 return -EINVAL;
425 }
426}
427
428
429/*
430 * vx_test_and_ack - test and acknowledge interrupt
431 *
432 * called from irq hander, too
433 *
434 * spinlock held!
435 */
436static int vx2_test_and_ack(struct vx_core *chip)
437{
438 /* not booted yet? */
439 if (! (chip->chip_status & VX_STAT_XILINX_LOADED))
440 return -ENXIO;
441
442 if (! (vx_inl(chip, STATUS) & VX_STATUS_MEMIRQ_MASK))
443 return -EIO;
444
445 /* ok, interrupts generated, now ack it */
446 /* set ACQUIT bit up and down */
447 vx_outl(chip, STATUS, 0);
448 /* useless read just to spend some time and maintain
449 * the ACQUIT signal up for a while ( a bus cycle )
450 */
451 vx_inl(chip, STATUS);
452 /* ack */
453 vx_outl(chip, STATUS, VX_STATUS_MEMIRQ_MASK);
454 /* useless read just to spend some time and maintain
455 * the ACQUIT signal up for a while ( a bus cycle ) */
456 vx_inl(chip, STATUS);
457 /* clear */
458 vx_outl(chip, STATUS, 0);
459
460 return 0;
461}
462
463
464/*
465 * vx_validate_irq - enable/disable IRQ
466 */
467static void vx2_validate_irq(struct vx_core *_chip, int enable)
468{
469 struct snd_vx222 *chip = to_vx222(_chip);
470
471 /* Set the interrupt enable bit to 1 in CDSP register */
472 if (enable) {
473 /* Set the PCI interrupt enable bit to 1.*/
474 vx_outl(chip, INTCSR, VX_INTCSR_VALUE|VX_PCI_INTERRUPT_MASK);
475 chip->regCDSP |= VX_CDSP_VALID_IRQ_MASK;
476 } else {
477 /* Set the PCI interrupt enable bit to 0. */
478 vx_outl(chip, INTCSR, VX_INTCSR_VALUE&~VX_PCI_INTERRUPT_MASK);
479 chip->regCDSP &= ~VX_CDSP_VALID_IRQ_MASK;
480 }
481 vx_outl(chip, CDSP, chip->regCDSP);
482}
483
484
485/*
486 * write an AKM codec data (24bit)
487 */
488static void vx2_write_codec_reg(struct vx_core *chip, unsigned int data)
489{
490 unsigned int i;
491
492 vx_inl(chip, HIFREQ);
493
494 /* We have to send 24 bits (3 x 8 bits). Start with most signif. Bit */
495 for (i = 0; i < 24; i++, data <<= 1)
496 vx_outl(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0));
497 /* Terminate access to codec registers */
498 vx_inl(chip, RUER);
499}
500
501
502#define AKM_CODEC_POWER_CONTROL_CMD 0xA007
503#define AKM_CODEC_RESET_ON_CMD 0xA100
504#define AKM_CODEC_RESET_OFF_CMD 0xA103
505#define AKM_CODEC_CLOCK_FORMAT_CMD 0xA240
506#define AKM_CODEC_MUTE_CMD 0xA38D
507#define AKM_CODEC_UNMUTE_CMD 0xA30D
508#define AKM_CODEC_LEFT_LEVEL_CMD 0xA400
509#define AKM_CODEC_RIGHT_LEVEL_CMD 0xA500
510
511static const u8 vx2_akm_gains_lut[VX2_AKM_LEVEL_MAX+1] = {
512 0x7f, // [000] = +0.000 dB -> AKM(0x7f) = +0.000 dB error(+0.000 dB)
513 0x7d, // [001] = -0.500 dB -> AKM(0x7d) = -0.572 dB error(-0.072 dB)
514 0x7c, // [002] = -1.000 dB -> AKM(0x7c) = -0.873 dB error(+0.127 dB)
515 0x7a, // [003] = -1.500 dB -> AKM(0x7a) = -1.508 dB error(-0.008 dB)
516 0x79, // [004] = -2.000 dB -> AKM(0x79) = -1.844 dB error(+0.156 dB)
517 0x77, // [005] = -2.500 dB -> AKM(0x77) = -2.557 dB error(-0.057 dB)
518 0x76, // [006] = -3.000 dB -> AKM(0x76) = -2.937 dB error(+0.063 dB)
519 0x75, // [007] = -3.500 dB -> AKM(0x75) = -3.334 dB error(+0.166 dB)
520 0x73, // [008] = -4.000 dB -> AKM(0x73) = -4.188 dB error(-0.188 dB)
521 0x72, // [009] = -4.500 dB -> AKM(0x72) = -4.648 dB error(-0.148 dB)
522 0x71, // [010] = -5.000 dB -> AKM(0x71) = -5.134 dB error(-0.134 dB)
523 0x70, // [011] = -5.500 dB -> AKM(0x70) = -5.649 dB error(-0.149 dB)
524 0x6f, // [012] = -6.000 dB -> AKM(0x6f) = -6.056 dB error(-0.056 dB)
525 0x6d, // [013] = -6.500 dB -> AKM(0x6d) = -6.631 dB error(-0.131 dB)
526 0x6c, // [014] = -7.000 dB -> AKM(0x6c) = -6.933 dB error(+0.067 dB)
527 0x6a, // [015] = -7.500 dB -> AKM(0x6a) = -7.571 dB error(-0.071 dB)
528 0x69, // [016] = -8.000 dB -> AKM(0x69) = -7.909 dB error(+0.091 dB)
529 0x67, // [017] = -8.500 dB -> AKM(0x67) = -8.626 dB error(-0.126 dB)
530 0x66, // [018] = -9.000 dB -> AKM(0x66) = -9.008 dB error(-0.008 dB)
531 0x65, // [019] = -9.500 dB -> AKM(0x65) = -9.407 dB error(+0.093 dB)
532 0x64, // [020] = -10.000 dB -> AKM(0x64) = -9.826 dB error(+0.174 dB)
533 0x62, // [021] = -10.500 dB -> AKM(0x62) = -10.730 dB error(-0.230 dB)
534 0x61, // [022] = -11.000 dB -> AKM(0x61) = -11.219 dB error(-0.219 dB)
535 0x60, // [023] = -11.500 dB -> AKM(0x60) = -11.738 dB error(-0.238 dB)
536 0x5f, // [024] = -12.000 dB -> AKM(0x5f) = -12.149 dB error(-0.149 dB)
537 0x5e, // [025] = -12.500 dB -> AKM(0x5e) = -12.434 dB error(+0.066 dB)
538 0x5c, // [026] = -13.000 dB -> AKM(0x5c) = -13.033 dB error(-0.033 dB)
539 0x5b, // [027] = -13.500 dB -> AKM(0x5b) = -13.350 dB error(+0.150 dB)
540 0x59, // [028] = -14.000 dB -> AKM(0x59) = -14.018 dB error(-0.018 dB)
541 0x58, // [029] = -14.500 dB -> AKM(0x58) = -14.373 dB error(+0.127 dB)
542 0x56, // [030] = -15.000 dB -> AKM(0x56) = -15.130 dB error(-0.130 dB)
543 0x55, // [031] = -15.500 dB -> AKM(0x55) = -15.534 dB error(-0.034 dB)
544 0x54, // [032] = -16.000 dB -> AKM(0x54) = -15.958 dB error(+0.042 dB)
545 0x53, // [033] = -16.500 dB -> AKM(0x53) = -16.404 dB error(+0.096 dB)
546 0x52, // [034] = -17.000 dB -> AKM(0x52) = -16.874 dB error(+0.126 dB)
547 0x51, // [035] = -17.500 dB -> AKM(0x51) = -17.371 dB error(+0.129 dB)
548 0x50, // [036] = -18.000 dB -> AKM(0x50) = -17.898 dB error(+0.102 dB)
549 0x4e, // [037] = -18.500 dB -> AKM(0x4e) = -18.605 dB error(-0.105 dB)
550 0x4d, // [038] = -19.000 dB -> AKM(0x4d) = -18.905 dB error(+0.095 dB)
551 0x4b, // [039] = -19.500 dB -> AKM(0x4b) = -19.538 dB error(-0.038 dB)
552 0x4a, // [040] = -20.000 dB -> AKM(0x4a) = -19.872 dB error(+0.128 dB)
553 0x48, // [041] = -20.500 dB -> AKM(0x48) = -20.583 dB error(-0.083 dB)
554 0x47, // [042] = -21.000 dB -> AKM(0x47) = -20.961 dB error(+0.039 dB)
555 0x46, // [043] = -21.500 dB -> AKM(0x46) = -21.356 dB error(+0.144 dB)
556 0x44, // [044] = -22.000 dB -> AKM(0x44) = -22.206 dB error(-0.206 dB)
557 0x43, // [045] = -22.500 dB -> AKM(0x43) = -22.664 dB error(-0.164 dB)
558 0x42, // [046] = -23.000 dB -> AKM(0x42) = -23.147 dB error(-0.147 dB)
559 0x41, // [047] = -23.500 dB -> AKM(0x41) = -23.659 dB error(-0.159 dB)
560 0x40, // [048] = -24.000 dB -> AKM(0x40) = -24.203 dB error(-0.203 dB)
561 0x3f, // [049] = -24.500 dB -> AKM(0x3f) = -24.635 dB error(-0.135 dB)
562 0x3e, // [050] = -25.000 dB -> AKM(0x3e) = -24.935 dB error(+0.065 dB)
563 0x3c, // [051] = -25.500 dB -> AKM(0x3c) = -25.569 dB error(-0.069 dB)
564 0x3b, // [052] = -26.000 dB -> AKM(0x3b) = -25.904 dB error(+0.096 dB)
565 0x39, // [053] = -26.500 dB -> AKM(0x39) = -26.615 dB error(-0.115 dB)
566 0x38, // [054] = -27.000 dB -> AKM(0x38) = -26.994 dB error(+0.006 dB)
567 0x37, // [055] = -27.500 dB -> AKM(0x37) = -27.390 dB error(+0.110 dB)
568 0x36, // [056] = -28.000 dB -> AKM(0x36) = -27.804 dB error(+0.196 dB)
569 0x34, // [057] = -28.500 dB -> AKM(0x34) = -28.699 dB error(-0.199 dB)
570 0x33, // [058] = -29.000 dB -> AKM(0x33) = -29.183 dB error(-0.183 dB)
571 0x32, // [059] = -29.500 dB -> AKM(0x32) = -29.696 dB error(-0.196 dB)
572 0x31, // [060] = -30.000 dB -> AKM(0x31) = -30.241 dB error(-0.241 dB)
573 0x31, // [061] = -30.500 dB -> AKM(0x31) = -30.241 dB error(+0.259 dB)
574 0x30, // [062] = -31.000 dB -> AKM(0x30) = -30.823 dB error(+0.177 dB)
575 0x2e, // [063] = -31.500 dB -> AKM(0x2e) = -31.610 dB error(-0.110 dB)
576 0x2d, // [064] = -32.000 dB -> AKM(0x2d) = -31.945 dB error(+0.055 dB)
577 0x2b, // [065] = -32.500 dB -> AKM(0x2b) = -32.659 dB error(-0.159 dB)
578 0x2a, // [066] = -33.000 dB -> AKM(0x2a) = -33.038 dB error(-0.038 dB)
579 0x29, // [067] = -33.500 dB -> AKM(0x29) = -33.435 dB error(+0.065 dB)
580 0x28, // [068] = -34.000 dB -> AKM(0x28) = -33.852 dB error(+0.148 dB)
581 0x27, // [069] = -34.500 dB -> AKM(0x27) = -34.289 dB error(+0.211 dB)
582 0x25, // [070] = -35.000 dB -> AKM(0x25) = -35.235 dB error(-0.235 dB)
583 0x24, // [071] = -35.500 dB -> AKM(0x24) = -35.750 dB error(-0.250 dB)
584 0x24, // [072] = -36.000 dB -> AKM(0x24) = -35.750 dB error(+0.250 dB)
585 0x23, // [073] = -36.500 dB -> AKM(0x23) = -36.297 dB error(+0.203 dB)
586 0x22, // [074] = -37.000 dB -> AKM(0x22) = -36.881 dB error(+0.119 dB)
587 0x21, // [075] = -37.500 dB -> AKM(0x21) = -37.508 dB error(-0.008 dB)
588 0x20, // [076] = -38.000 dB -> AKM(0x20) = -38.183 dB error(-0.183 dB)
589 0x1f, // [077] = -38.500 dB -> AKM(0x1f) = -38.726 dB error(-0.226 dB)
590 0x1e, // [078] = -39.000 dB -> AKM(0x1e) = -39.108 dB error(-0.108 dB)
591 0x1d, // [079] = -39.500 dB -> AKM(0x1d) = -39.507 dB error(-0.007 dB)
592 0x1c, // [080] = -40.000 dB -> AKM(0x1c) = -39.926 dB error(+0.074 dB)
593 0x1b, // [081] = -40.500 dB -> AKM(0x1b) = -40.366 dB error(+0.134 dB)
594 0x1a, // [082] = -41.000 dB -> AKM(0x1a) = -40.829 dB error(+0.171 dB)
595 0x19, // [083] = -41.500 dB -> AKM(0x19) = -41.318 dB error(+0.182 dB)
596 0x18, // [084] = -42.000 dB -> AKM(0x18) = -41.837 dB error(+0.163 dB)
597 0x17, // [085] = -42.500 dB -> AKM(0x17) = -42.389 dB error(+0.111 dB)
598 0x16, // [086] = -43.000 dB -> AKM(0x16) = -42.978 dB error(+0.022 dB)
599 0x15, // [087] = -43.500 dB -> AKM(0x15) = -43.610 dB error(-0.110 dB)
600 0x14, // [088] = -44.000 dB -> AKM(0x14) = -44.291 dB error(-0.291 dB)
601 0x14, // [089] = -44.500 dB -> AKM(0x14) = -44.291 dB error(+0.209 dB)
602 0x13, // [090] = -45.000 dB -> AKM(0x13) = -45.031 dB error(-0.031 dB)
603 0x12, // [091] = -45.500 dB -> AKM(0x12) = -45.840 dB error(-0.340 dB)
604 0x12, // [092] = -46.000 dB -> AKM(0x12) = -45.840 dB error(+0.160 dB)
605 0x11, // [093] = -46.500 dB -> AKM(0x11) = -46.731 dB error(-0.231 dB)
606 0x11, // [094] = -47.000 dB -> AKM(0x11) = -46.731 dB error(+0.269 dB)
607 0x10, // [095] = -47.500 dB -> AKM(0x10) = -47.725 dB error(-0.225 dB)
608 0x10, // [096] = -48.000 dB -> AKM(0x10) = -47.725 dB error(+0.275 dB)
609 0x0f, // [097] = -48.500 dB -> AKM(0x0f) = -48.553 dB error(-0.053 dB)
610 0x0e, // [098] = -49.000 dB -> AKM(0x0e) = -49.152 dB error(-0.152 dB)
611 0x0d, // [099] = -49.500 dB -> AKM(0x0d) = -49.796 dB error(-0.296 dB)
612 0x0d, // [100] = -50.000 dB -> AKM(0x0d) = -49.796 dB error(+0.204 dB)
613 0x0c, // [101] = -50.500 dB -> AKM(0x0c) = -50.491 dB error(+0.009 dB)
614 0x0b, // [102] = -51.000 dB -> AKM(0x0b) = -51.247 dB error(-0.247 dB)
615 0x0b, // [103] = -51.500 dB -> AKM(0x0b) = -51.247 dB error(+0.253 dB)
616 0x0a, // [104] = -52.000 dB -> AKM(0x0a) = -52.075 dB error(-0.075 dB)
617 0x0a, // [105] = -52.500 dB -> AKM(0x0a) = -52.075 dB error(+0.425 dB)
618 0x09, // [106] = -53.000 dB -> AKM(0x09) = -52.990 dB error(+0.010 dB)
619 0x09, // [107] = -53.500 dB -> AKM(0x09) = -52.990 dB error(+0.510 dB)
620 0x08, // [108] = -54.000 dB -> AKM(0x08) = -54.013 dB error(-0.013 dB)
621 0x08, // [109] = -54.500 dB -> AKM(0x08) = -54.013 dB error(+0.487 dB)
622 0x07, // [110] = -55.000 dB -> AKM(0x07) = -55.173 dB error(-0.173 dB)
623 0x07, // [111] = -55.500 dB -> AKM(0x07) = -55.173 dB error(+0.327 dB)
624 0x06, // [112] = -56.000 dB -> AKM(0x06) = -56.512 dB error(-0.512 dB)
625 0x06, // [113] = -56.500 dB -> AKM(0x06) = -56.512 dB error(-0.012 dB)
626 0x06, // [114] = -57.000 dB -> AKM(0x06) = -56.512 dB error(+0.488 dB)
627 0x05, // [115] = -57.500 dB -> AKM(0x05) = -58.095 dB error(-0.595 dB)
628 0x05, // [116] = -58.000 dB -> AKM(0x05) = -58.095 dB error(-0.095 dB)
629 0x05, // [117] = -58.500 dB -> AKM(0x05) = -58.095 dB error(+0.405 dB)
630 0x05, // [118] = -59.000 dB -> AKM(0x05) = -58.095 dB error(+0.905 dB)
631 0x04, // [119] = -59.500 dB -> AKM(0x04) = -60.034 dB error(-0.534 dB)
632 0x04, // [120] = -60.000 dB -> AKM(0x04) = -60.034 dB error(-0.034 dB)
633 0x04, // [121] = -60.500 dB -> AKM(0x04) = -60.034 dB error(+0.466 dB)
634 0x04, // [122] = -61.000 dB -> AKM(0x04) = -60.034 dB error(+0.966 dB)
635 0x03, // [123] = -61.500 dB -> AKM(0x03) = -62.532 dB error(-1.032 dB)
636 0x03, // [124] = -62.000 dB -> AKM(0x03) = -62.532 dB error(-0.532 dB)
637 0x03, // [125] = -62.500 dB -> AKM(0x03) = -62.532 dB error(-0.032 dB)
638 0x03, // [126] = -63.000 dB -> AKM(0x03) = -62.532 dB error(+0.468 dB)
639 0x03, // [127] = -63.500 dB -> AKM(0x03) = -62.532 dB error(+0.968 dB)
640 0x03, // [128] = -64.000 dB -> AKM(0x03) = -62.532 dB error(+1.468 dB)
641 0x02, // [129] = -64.500 dB -> AKM(0x02) = -66.054 dB error(-1.554 dB)
642 0x02, // [130] = -65.000 dB -> AKM(0x02) = -66.054 dB error(-1.054 dB)
643 0x02, // [131] = -65.500 dB -> AKM(0x02) = -66.054 dB error(-0.554 dB)
644 0x02, // [132] = -66.000 dB -> AKM(0x02) = -66.054 dB error(-0.054 dB)
645 0x02, // [133] = -66.500 dB -> AKM(0x02) = -66.054 dB error(+0.446 dB)
646 0x02, // [134] = -67.000 dB -> AKM(0x02) = -66.054 dB error(+0.946 dB)
647 0x02, // [135] = -67.500 dB -> AKM(0x02) = -66.054 dB error(+1.446 dB)
648 0x02, // [136] = -68.000 dB -> AKM(0x02) = -66.054 dB error(+1.946 dB)
649 0x02, // [137] = -68.500 dB -> AKM(0x02) = -66.054 dB error(+2.446 dB)
650 0x02, // [138] = -69.000 dB -> AKM(0x02) = -66.054 dB error(+2.946 dB)
651 0x01, // [139] = -69.500 dB -> AKM(0x01) = -72.075 dB error(-2.575 dB)
652 0x01, // [140] = -70.000 dB -> AKM(0x01) = -72.075 dB error(-2.075 dB)
653 0x01, // [141] = -70.500 dB -> AKM(0x01) = -72.075 dB error(-1.575 dB)
654 0x01, // [142] = -71.000 dB -> AKM(0x01) = -72.075 dB error(-1.075 dB)
655 0x01, // [143] = -71.500 dB -> AKM(0x01) = -72.075 dB error(-0.575 dB)
656 0x01, // [144] = -72.000 dB -> AKM(0x01) = -72.075 dB error(-0.075 dB)
657 0x01, // [145] = -72.500 dB -> AKM(0x01) = -72.075 dB error(+0.425 dB)
658 0x01, // [146] = -73.000 dB -> AKM(0x01) = -72.075 dB error(+0.925 dB)
659 0x00}; // [147] = -73.500 dB -> AKM(0x00) = mute error(+infini)
660
661/*
662 * pseudo-codec write entry
663 */
664static void vx2_write_akm(struct vx_core *chip, int reg, unsigned int data)
665{
666 unsigned int val;
667
668 if (reg == XX_CODEC_DAC_CONTROL_REGISTER) {
669 vx2_write_codec_reg(chip, data ? AKM_CODEC_MUTE_CMD : AKM_CODEC_UNMUTE_CMD);
670 return;
671 }
672
673 /* `data' is a value between 0x0 and VX2_AKM_LEVEL_MAX = 0x093, in the case of the AKM codecs, we need
674 a look up table, as there is no linear matching between the driver codec values
675 and the real dBu value
676 */
677 if (snd_BUG_ON(data >= sizeof(vx2_akm_gains_lut)))
678 return;
679
680 switch (reg) {
681 case XX_CODEC_LEVEL_LEFT_REGISTER:
682 val = AKM_CODEC_LEFT_LEVEL_CMD;
683 break;
684 case XX_CODEC_LEVEL_RIGHT_REGISTER:
685 val = AKM_CODEC_RIGHT_LEVEL_CMD;
686 break;
687 default:
688 snd_BUG();
689 return;
690 }
691 val |= vx2_akm_gains_lut[data];
692
693 vx2_write_codec_reg(chip, val);
694}
695
696
697/*
698 * write codec bit for old VX222 board
699 */
700static void vx2_old_write_codec_bit(struct vx_core *chip, int codec, unsigned int data)
701{
702 int i;
703
704 /* activate access to codec registers */
705 vx_inl(chip, HIFREQ);
706
707 for (i = 0; i < 24; i++, data <<= 1)
708 vx_outl(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0));
709
710 /* Terminate access to codec registers */
711 vx_inl(chip, RUER);
712}
713
714
715/*
716 * reset codec bit
717 */
718static void vx2_reset_codec(struct vx_core *_chip)
719{
720 struct snd_vx222 *chip = to_vx222(_chip);
721
722 /* Set the reset CODEC bit to 0. */
723 vx_outl(chip, CDSP, chip->regCDSP &~ VX_CDSP_CODEC_RESET_MASK);
724 vx_inl(chip, CDSP);
725 msleep(10);
726 /* Set the reset CODEC bit to 1. */
727 chip->regCDSP |= VX_CDSP_CODEC_RESET_MASK;
728 vx_outl(chip, CDSP, chip->regCDSP);
729 vx_inl(chip, CDSP);
730 if (_chip->type == VX_TYPE_BOARD) {
731 msleep(1);
732 return;
733 }
734
735 msleep(5); /* additionnel wait time for AKM's */
736
737 vx2_write_codec_reg(_chip, AKM_CODEC_POWER_CONTROL_CMD); /* DAC power up, ADC power up, Vref power down */
738
739 vx2_write_codec_reg(_chip, AKM_CODEC_CLOCK_FORMAT_CMD); /* default */
740 vx2_write_codec_reg(_chip, AKM_CODEC_MUTE_CMD); /* Mute = ON ,Deemphasis = OFF */
741 vx2_write_codec_reg(_chip, AKM_CODEC_RESET_OFF_CMD); /* DAC and ADC normal operation */
742
743 if (_chip->type == VX_TYPE_MIC) {
744 /* set up the micro input selector */
745 chip->regSELMIC = MICRO_SELECT_INPUT_NORM |
746 MICRO_SELECT_PREAMPLI_G_0 |
747 MICRO_SELECT_NOISE_T_52DB;
748
749 /* reset phantom power supply */
750 chip->regSELMIC &= ~MICRO_SELECT_PHANTOM_ALIM;
751
752 vx_outl(_chip, SELMIC, chip->regSELMIC);
753 }
754}
755
756
757/*
758 * change the audio source
759 */
760static void vx2_change_audio_source(struct vx_core *_chip, int src)
761{
762 struct snd_vx222 *chip = to_vx222(_chip);
763
764 switch (src) {
765 case VX_AUDIO_SRC_DIGITAL:
766 chip->regCFG |= VX_CFG_DATAIN_SEL_MASK;
767 break;
768 default:
769 chip->regCFG &= ~VX_CFG_DATAIN_SEL_MASK;
770 break;
771 }
772 vx_outl(chip, CFG, chip->regCFG);
773}
774
775
776/*
777 * set the clock source
778 */
779static void vx2_set_clock_source(struct vx_core *_chip, int source)
780{
781 struct snd_vx222 *chip = to_vx222(_chip);
782
783 if (source == INTERNAL_QUARTZ)
784 chip->regCFG &= ~VX_CFG_CLOCKIN_SEL_MASK;
785 else
786 chip->regCFG |= VX_CFG_CLOCKIN_SEL_MASK;
787 vx_outl(chip, CFG, chip->regCFG);
788}
789
790/*
791 * reset the board
792 */
793static void vx2_reset_board(struct vx_core *_chip, int cold_reset)
794{
795 struct snd_vx222 *chip = to_vx222(_chip);
796
797 /* initialize the register values */
798 chip->regCDSP = VX_CDSP_CODEC_RESET_MASK | VX_CDSP_DSP_RESET_MASK ;
799 chip->regCFG = 0;
800}
801
802
803
804/*
805 * input level controls for VX222 Mic
806 */
807
808/* Micro level is specified to be adjustable from -96dB to 63 dB (board coded 0x00 ... 318),
809 * 318 = 210 + 36 + 36 + 36 (210 = +9dB variable) (3 * 36 = 3 steps of 18dB pre ampli)
810 * as we will mute if less than -110dB, so let's simply use line input coded levels and add constant offset !
811 */
812#define V2_MICRO_LEVEL_RANGE (318 - 255)
813
814static void vx2_set_input_level(struct snd_vx222 *chip)
815{
816 int i, miclevel, preamp;
817 unsigned int data;
818
819 miclevel = chip->mic_level;
820 miclevel += V2_MICRO_LEVEL_RANGE; /* add 318 - 0xff */
821 preamp = 0;
822 while (miclevel > 210) { /* limitation to +9dB of 3310 real gain */
823 preamp++; /* raise pre ampli + 18dB */
824 miclevel -= (18 * 2); /* lower level 18 dB (*2 because of 0.5 dB steps !) */
825 }
826 if (snd_BUG_ON(preamp >= 4))
827 return;
828
829 /* set pre-amp level */
830 chip->regSELMIC &= ~MICRO_SELECT_PREAMPLI_MASK;
831 chip->regSELMIC |= (preamp << MICRO_SELECT_PREAMPLI_OFFSET) & MICRO_SELECT_PREAMPLI_MASK;
832 vx_outl(chip, SELMIC, chip->regSELMIC);
833
834 data = (unsigned int)miclevel << 16 |
835 (unsigned int)chip->input_level[1] << 8 |
836 (unsigned int)chip->input_level[0];
837 vx_inl(chip, DATA); /* Activate input level programming */
838
839 /* We have to send 32 bits (4 x 8 bits) */
840 for (i = 0; i < 32; i++, data <<= 1)
841 vx_outl(chip, DATA, ((data & 0x80000000) ? VX_DATA_CODEC_MASK : 0));
842
843 vx_inl(chip, RUER); /* Terminate input level programming */
844}
845
846
847#define MIC_LEVEL_MAX 0xff
848
849static const DECLARE_TLV_DB_SCALE(db_scale_mic, -6450, 50, 0);
850
851/*
852 * controls API for input levels
853 */
854
855/* input levels */
856static int vx_input_level_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
857{
858 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
859 uinfo->count = 2;
860 uinfo->value.integer.min = 0;
861 uinfo->value.integer.max = MIC_LEVEL_MAX;
862 return 0;
863}
864
865static int vx_input_level_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
866{
867 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
868 struct snd_vx222 *chip = to_vx222(_chip);
869 mutex_lock(&_chip->mixer_mutex);
870 ucontrol->value.integer.value[0] = chip->input_level[0];
871 ucontrol->value.integer.value[1] = chip->input_level[1];
872 mutex_unlock(&_chip->mixer_mutex);
873 return 0;
874}
875
876static int vx_input_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
877{
878 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
879 struct snd_vx222 *chip = to_vx222(_chip);
880 if (ucontrol->value.integer.value[0] < 0 ||
881 ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
882 return -EINVAL;
883 if (ucontrol->value.integer.value[1] < 0 ||
884 ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
885 return -EINVAL;
886 mutex_lock(&_chip->mixer_mutex);
887 if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
888 chip->input_level[1] != ucontrol->value.integer.value[1]) {
889 chip->input_level[0] = ucontrol->value.integer.value[0];
890 chip->input_level[1] = ucontrol->value.integer.value[1];
891 vx2_set_input_level(chip);
892 mutex_unlock(&_chip->mixer_mutex);
893 return 1;
894 }
895 mutex_unlock(&_chip->mixer_mutex);
896 return 0;
897}
898
899/* mic level */
900static int vx_mic_level_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
901{
902 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
903 uinfo->count = 1;
904 uinfo->value.integer.min = 0;
905 uinfo->value.integer.max = MIC_LEVEL_MAX;
906 return 0;
907}
908
909static int vx_mic_level_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
910{
911 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
912 struct snd_vx222 *chip = to_vx222(_chip);
913 ucontrol->value.integer.value[0] = chip->mic_level;
914 return 0;
915}
916
917static int vx_mic_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
918{
919 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
920 struct snd_vx222 *chip = to_vx222(_chip);
921 if (ucontrol->value.integer.value[0] < 0 ||
922 ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
923 return -EINVAL;
924 mutex_lock(&_chip->mixer_mutex);
925 if (chip->mic_level != ucontrol->value.integer.value[0]) {
926 chip->mic_level = ucontrol->value.integer.value[0];
927 vx2_set_input_level(chip);
928 mutex_unlock(&_chip->mixer_mutex);
929 return 1;
930 }
931 mutex_unlock(&_chip->mixer_mutex);
932 return 0;
933}
934
935static const struct snd_kcontrol_new vx_control_input_level = {
936 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
937 .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
938 SNDRV_CTL_ELEM_ACCESS_TLV_READ),
939 .name = "Capture Volume",
940 .info = vx_input_level_info,
941 .get = vx_input_level_get,
942 .put = vx_input_level_put,
943 .tlv = { .p = db_scale_mic },
944};
945
946static const struct snd_kcontrol_new vx_control_mic_level = {
947 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
948 .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
949 SNDRV_CTL_ELEM_ACCESS_TLV_READ),
950 .name = "Mic Capture Volume",
951 .info = vx_mic_level_info,
952 .get = vx_mic_level_get,
953 .put = vx_mic_level_put,
954 .tlv = { .p = db_scale_mic },
955};
956
957/*
958 * FIXME: compressor/limiter implementation is missing yet...
959 */
960
961static int vx2_add_mic_controls(struct vx_core *_chip)
962{
963 struct snd_vx222 *chip = to_vx222(_chip);
964 int err;
965
966 if (_chip->type != VX_TYPE_MIC)
967 return 0;
968
969 /* mute input levels */
970 chip->input_level[0] = chip->input_level[1] = 0;
971 chip->mic_level = 0;
972 vx2_set_input_level(chip);
973
974 /* controls */
975 if ((err = snd_ctl_add(_chip->card, snd_ctl_new1(&vx_control_input_level, chip))) < 0)
976 return err;
977 if ((err = snd_ctl_add(_chip->card, snd_ctl_new1(&vx_control_mic_level, chip))) < 0)
978 return err;
979
980 return 0;
981}
982
983
984/*
985 * callbacks
986 */
987struct snd_vx_ops vx222_ops = {
988 .in8 = vx2_inb,
989 .in32 = vx2_inl,
990 .out8 = vx2_outb,
991 .out32 = vx2_outl,
992 .test_and_ack = vx2_test_and_ack,
993 .validate_irq = vx2_validate_irq,
994 .akm_write = vx2_write_akm,
995 .reset_codec = vx2_reset_codec,
996 .change_audio_source = vx2_change_audio_source,
997 .set_clock_source = vx2_set_clock_source,
998 .load_dsp = vx2_load_dsp,
999 .reset_dsp = vx2_reset_dsp,
1000 .reset_board = vx2_reset_board,
1001 .dma_write = vx2_dma_write,
1002 .dma_read = vx2_dma_read,
1003 .add_controls = vx2_add_mic_controls,
1004};
1005
1006/* for old VX222 board */
1007struct snd_vx_ops vx222_old_ops = {
1008 .in8 = vx2_inb,
1009 .in32 = vx2_inl,
1010 .out8 = vx2_outb,
1011 .out32 = vx2_outl,
1012 .test_and_ack = vx2_test_and_ack,
1013 .validate_irq = vx2_validate_irq,
1014 .write_codec = vx2_old_write_codec_bit,
1015 .reset_codec = vx2_reset_codec,
1016 .change_audio_source = vx2_change_audio_source,
1017 .set_clock_source = vx2_set_clock_source,
1018 .load_dsp = vx2_load_dsp,
1019 .reset_dsp = vx2_reset_dsp,
1020 .reset_board = vx2_reset_board,
1021 .dma_write = vx2_dma_write,
1022 .dma_read = vx2_dma_read,
1023};
1024
1/*
2 * Driver for Digigram VX222 V2/Mic soundcards
3 *
4 * VX222-specific low-level routines
5 *
6 * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 */
22
23#include <linux/delay.h>
24#include <linux/device.h>
25#include <linux/firmware.h>
26#include <linux/mutex.h>
27
28#include <sound/core.h>
29#include <sound/control.h>
30#include <sound/tlv.h>
31#include <asm/io.h>
32#include "vx222.h"
33
34
35static int vx2_reg_offset[VX_REG_MAX] = {
36 [VX_ICR] = 0x00,
37 [VX_CVR] = 0x04,
38 [VX_ISR] = 0x08,
39 [VX_IVR] = 0x0c,
40 [VX_RXH] = 0x14,
41 [VX_RXM] = 0x18,
42 [VX_RXL] = 0x1c,
43 [VX_DMA] = 0x10,
44 [VX_CDSP] = 0x20,
45 [VX_CFG] = 0x24,
46 [VX_RUER] = 0x28,
47 [VX_DATA] = 0x2c,
48 [VX_STATUS] = 0x30,
49 [VX_LOFREQ] = 0x34,
50 [VX_HIFREQ] = 0x38,
51 [VX_CSUER] = 0x3c,
52 [VX_SELMIC] = 0x40,
53 [VX_COMPOT] = 0x44, // Write: POTENTIOMETER ; Read: COMPRESSION LEVEL activate
54 [VX_SCOMPR] = 0x48, // Read: COMPRESSION THRESHOLD activate
55 [VX_GLIMIT] = 0x4c, // Read: LEVEL LIMITATION activate
56 [VX_INTCSR] = 0x4c, // VX_INTCSR_REGISTER_OFFSET
57 [VX_CNTRL] = 0x50, // VX_CNTRL_REGISTER_OFFSET
58 [VX_GPIOC] = 0x54, // VX_GPIOC (new with PLX9030)
59};
60
61static int vx2_reg_index[VX_REG_MAX] = {
62 [VX_ICR] = 1,
63 [VX_CVR] = 1,
64 [VX_ISR] = 1,
65 [VX_IVR] = 1,
66 [VX_RXH] = 1,
67 [VX_RXM] = 1,
68 [VX_RXL] = 1,
69 [VX_DMA] = 1,
70 [VX_CDSP] = 1,
71 [VX_CFG] = 1,
72 [VX_RUER] = 1,
73 [VX_DATA] = 1,
74 [VX_STATUS] = 1,
75 [VX_LOFREQ] = 1,
76 [VX_HIFREQ] = 1,
77 [VX_CSUER] = 1,
78 [VX_SELMIC] = 1,
79 [VX_COMPOT] = 1,
80 [VX_SCOMPR] = 1,
81 [VX_GLIMIT] = 1,
82 [VX_INTCSR] = 0, /* on the PLX */
83 [VX_CNTRL] = 0, /* on the PLX */
84 [VX_GPIOC] = 0, /* on the PLX */
85};
86
87static inline unsigned long vx2_reg_addr(struct vx_core *_chip, int reg)
88{
89 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
90 return chip->port[vx2_reg_index[reg]] + vx2_reg_offset[reg];
91}
92
93/**
94 * snd_vx_inb - read a byte from the register
95 * @offset: register enum
96 */
97static unsigned char vx2_inb(struct vx_core *chip, int offset)
98{
99 return inb(vx2_reg_addr(chip, offset));
100}
101
102/**
103 * snd_vx_outb - write a byte on the register
104 * @offset: the register offset
105 * @val: the value to write
106 */
107static void vx2_outb(struct vx_core *chip, int offset, unsigned char val)
108{
109 outb(val, vx2_reg_addr(chip, offset));
110 /*
111 dev_dbg(chip->card->dev, "outb: %x -> %x\n", val, vx2_reg_addr(chip, offset));
112 */
113}
114
115/**
116 * snd_vx_inl - read a 32bit word from the register
117 * @offset: register enum
118 */
119static unsigned int vx2_inl(struct vx_core *chip, int offset)
120{
121 return inl(vx2_reg_addr(chip, offset));
122}
123
124/**
125 * snd_vx_outl - write a 32bit word on the register
126 * @offset: the register enum
127 * @val: the value to write
128 */
129static void vx2_outl(struct vx_core *chip, int offset, unsigned int val)
130{
131 /*
132 dev_dbg(chip->card->dev, "outl: %x -> %x\n", val, vx2_reg_addr(chip, offset));
133 */
134 outl(val, vx2_reg_addr(chip, offset));
135}
136
137/*
138 * redefine macros to call directly
139 */
140#undef vx_inb
141#define vx_inb(chip,reg) vx2_inb((struct vx_core*)(chip), VX_##reg)
142#undef vx_outb
143#define vx_outb(chip,reg,val) vx2_outb((struct vx_core*)(chip), VX_##reg, val)
144#undef vx_inl
145#define vx_inl(chip,reg) vx2_inl((struct vx_core*)(chip), VX_##reg)
146#undef vx_outl
147#define vx_outl(chip,reg,val) vx2_outl((struct vx_core*)(chip), VX_##reg, val)
148
149
150/*
151 * vx_reset_dsp - reset the DSP
152 */
153
154#define XX_DSP_RESET_WAIT_TIME 2 /* ms */
155
156static void vx2_reset_dsp(struct vx_core *_chip)
157{
158 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
159
160 /* set the reset dsp bit to 0 */
161 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_DSP_RESET_MASK);
162
163 mdelay(XX_DSP_RESET_WAIT_TIME);
164
165 chip->regCDSP |= VX_CDSP_DSP_RESET_MASK;
166 /* set the reset dsp bit to 1 */
167 vx_outl(chip, CDSP, chip->regCDSP);
168}
169
170
171static int vx2_test_xilinx(struct vx_core *_chip)
172{
173 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
174 unsigned int data;
175
176 dev_dbg(_chip->card->dev, "testing xilinx...\n");
177 /* This test uses several write/read sequences on TEST0 and TEST1 bits
178 * to figure out whever or not the xilinx was correctly loaded
179 */
180
181 /* We write 1 on CDSP.TEST0. We should get 0 on STATUS.TEST0. */
182 vx_outl(chip, CDSP, chip->regCDSP | VX_CDSP_TEST0_MASK);
183 vx_inl(chip, ISR);
184 data = vx_inl(chip, STATUS);
185 if ((data & VX_STATUS_VAL_TEST0_MASK) == VX_STATUS_VAL_TEST0_MASK) {
186 dev_dbg(_chip->card->dev, "bad!\n");
187 return -ENODEV;
188 }
189
190 /* We write 0 on CDSP.TEST0. We should get 1 on STATUS.TEST0. */
191 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_TEST0_MASK);
192 vx_inl(chip, ISR);
193 data = vx_inl(chip, STATUS);
194 if (! (data & VX_STATUS_VAL_TEST0_MASK)) {
195 dev_dbg(_chip->card->dev, "bad! #2\n");
196 return -ENODEV;
197 }
198
199 if (_chip->type == VX_TYPE_BOARD) {
200 /* not implemented on VX_2_BOARDS */
201 /* We write 1 on CDSP.TEST1. We should get 0 on STATUS.TEST1. */
202 vx_outl(chip, CDSP, chip->regCDSP | VX_CDSP_TEST1_MASK);
203 vx_inl(chip, ISR);
204 data = vx_inl(chip, STATUS);
205 if ((data & VX_STATUS_VAL_TEST1_MASK) == VX_STATUS_VAL_TEST1_MASK) {
206 dev_dbg(_chip->card->dev, "bad! #3\n");
207 return -ENODEV;
208 }
209
210 /* We write 0 on CDSP.TEST1. We should get 1 on STATUS.TEST1. */
211 vx_outl(chip, CDSP, chip->regCDSP & ~VX_CDSP_TEST1_MASK);
212 vx_inl(chip, ISR);
213 data = vx_inl(chip, STATUS);
214 if (! (data & VX_STATUS_VAL_TEST1_MASK)) {
215 dev_dbg(_chip->card->dev, "bad! #4\n");
216 return -ENODEV;
217 }
218 }
219 dev_dbg(_chip->card->dev, "ok, xilinx fine.\n");
220 return 0;
221}
222
223
224/**
225 * vx_setup_pseudo_dma - set up the pseudo dma read/write mode.
226 * @do_write: 0 = read, 1 = set up for DMA write
227 */
228static void vx2_setup_pseudo_dma(struct vx_core *chip, int do_write)
229{
230 /* Interrupt mode and HREQ pin enabled for host transmit data transfers
231 * (in case of the use of the pseudo-dma facility).
232 */
233 vx_outl(chip, ICR, do_write ? ICR_TREQ : ICR_RREQ);
234
235 /* Reset the pseudo-dma register (in case of the use of the
236 * pseudo-dma facility).
237 */
238 vx_outl(chip, RESET_DMA, 0);
239}
240
241/*
242 * vx_release_pseudo_dma - disable the pseudo-DMA mode
243 */
244static inline void vx2_release_pseudo_dma(struct vx_core *chip)
245{
246 /* HREQ pin disabled. */
247 vx_outl(chip, ICR, 0);
248}
249
250
251
252/* pseudo-dma write */
253static void vx2_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime,
254 struct vx_pipe *pipe, int count)
255{
256 unsigned long port = vx2_reg_addr(chip, VX_DMA);
257 int offset = pipe->hw_ptr;
258 u32 *addr = (u32 *)(runtime->dma_area + offset);
259
260 if (snd_BUG_ON(count % 4))
261 return;
262
263 vx2_setup_pseudo_dma(chip, 1);
264
265 /* Transfer using pseudo-dma.
266 */
267 if (offset + count > pipe->buffer_bytes) {
268 int length = pipe->buffer_bytes - offset;
269 count -= length;
270 length >>= 2; /* in 32bit words */
271 /* Transfer using pseudo-dma. */
272 while (length-- > 0) {
273 outl(cpu_to_le32(*addr), port);
274 addr++;
275 }
276 addr = (u32 *)runtime->dma_area;
277 pipe->hw_ptr = 0;
278 }
279 pipe->hw_ptr += count;
280 count >>= 2; /* in 32bit words */
281 /* Transfer using pseudo-dma. */
282 while (count-- > 0) {
283 outl(cpu_to_le32(*addr), port);
284 addr++;
285 }
286
287 vx2_release_pseudo_dma(chip);
288}
289
290
291/* pseudo dma read */
292static void vx2_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime,
293 struct vx_pipe *pipe, int count)
294{
295 int offset = pipe->hw_ptr;
296 u32 *addr = (u32 *)(runtime->dma_area + offset);
297 unsigned long port = vx2_reg_addr(chip, VX_DMA);
298
299 if (snd_BUG_ON(count % 4))
300 return;
301
302 vx2_setup_pseudo_dma(chip, 0);
303 /* Transfer using pseudo-dma.
304 */
305 if (offset + count > pipe->buffer_bytes) {
306 int length = pipe->buffer_bytes - offset;
307 count -= length;
308 length >>= 2; /* in 32bit words */
309 /* Transfer using pseudo-dma. */
310 while (length-- > 0)
311 *addr++ = le32_to_cpu(inl(port));
312 addr = (u32 *)runtime->dma_area;
313 pipe->hw_ptr = 0;
314 }
315 pipe->hw_ptr += count;
316 count >>= 2; /* in 32bit words */
317 /* Transfer using pseudo-dma. */
318 while (count-- > 0)
319 *addr++ = le32_to_cpu(inl(port));
320
321 vx2_release_pseudo_dma(chip);
322}
323
324#define VX_XILINX_RESET_MASK 0x40000000
325#define VX_USERBIT0_MASK 0x00000004
326#define VX_USERBIT1_MASK 0x00000020
327#define VX_CNTRL_REGISTER_VALUE 0x00172012
328
329/*
330 * transfer counts bits to PLX
331 */
332static int put_xilinx_data(struct vx_core *chip, unsigned int port, unsigned int counts, unsigned char data)
333{
334 unsigned int i;
335
336 for (i = 0; i < counts; i++) {
337 unsigned int val;
338
339 /* set the clock bit to 0. */
340 val = VX_CNTRL_REGISTER_VALUE & ~VX_USERBIT0_MASK;
341 vx2_outl(chip, port, val);
342 vx2_inl(chip, port);
343 udelay(1);
344
345 if (data & (1 << i))
346 val |= VX_USERBIT1_MASK;
347 else
348 val &= ~VX_USERBIT1_MASK;
349 vx2_outl(chip, port, val);
350 vx2_inl(chip, port);
351
352 /* set the clock bit to 1. */
353 val |= VX_USERBIT0_MASK;
354 vx2_outl(chip, port, val);
355 vx2_inl(chip, port);
356 udelay(1);
357 }
358 return 0;
359}
360
361/*
362 * load the xilinx image
363 */
364static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *xilinx)
365{
366 unsigned int i;
367 unsigned int port;
368 const unsigned char *image;
369
370 /* XILINX reset (wait at least 1 millisecond between reset on and off). */
371 vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
372 vx_inl(chip, CNTRL);
373 msleep(10);
374 vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE);
375 vx_inl(chip, CNTRL);
376 msleep(10);
377
378 if (chip->type == VX_TYPE_BOARD)
379 port = VX_CNTRL;
380 else
381 port = VX_GPIOC; /* VX222 V2 and VX222_MIC_BOARD with new PLX9030 use this register */
382
383 image = xilinx->data;
384 for (i = 0; i < xilinx->size; i++, image++) {
385 if (put_xilinx_data(chip, port, 8, *image) < 0)
386 return -EINVAL;
387 /* don't take too much time in this loop... */
388 cond_resched();
389 }
390 put_xilinx_data(chip, port, 4, 0xff); /* end signature */
391
392 msleep(200);
393
394 /* test after loading (is buggy with VX222) */
395 if (chip->type != VX_TYPE_BOARD) {
396 /* Test if load successful: test bit 8 of register GPIOC (VX222: use CNTRL) ! */
397 i = vx_inl(chip, GPIOC);
398 if (i & 0x0100)
399 return 0;
400 dev_err(chip->card->dev,
401 "xilinx test failed after load, GPIOC=0x%x\n", i);
402 return -EINVAL;
403 }
404
405 return 0;
406}
407
408
409/*
410 * load the boot/dsp images
411 */
412static int vx2_load_dsp(struct vx_core *vx, int index, const struct firmware *dsp)
413{
414 int err;
415
416 switch (index) {
417 case 1:
418 /* xilinx image */
419 if ((err = vx2_load_xilinx_binary(vx, dsp)) < 0)
420 return err;
421 if ((err = vx2_test_xilinx(vx)) < 0)
422 return err;
423 return 0;
424 case 2:
425 /* DSP boot */
426 return snd_vx_dsp_boot(vx, dsp);
427 case 3:
428 /* DSP image */
429 return snd_vx_dsp_load(vx, dsp);
430 default:
431 snd_BUG();
432 return -EINVAL;
433 }
434}
435
436
437/*
438 * vx_test_and_ack - test and acknowledge interrupt
439 *
440 * called from irq hander, too
441 *
442 * spinlock held!
443 */
444static int vx2_test_and_ack(struct vx_core *chip)
445{
446 /* not booted yet? */
447 if (! (chip->chip_status & VX_STAT_XILINX_LOADED))
448 return -ENXIO;
449
450 if (! (vx_inl(chip, STATUS) & VX_STATUS_MEMIRQ_MASK))
451 return -EIO;
452
453 /* ok, interrupts generated, now ack it */
454 /* set ACQUIT bit up and down */
455 vx_outl(chip, STATUS, 0);
456 /* useless read just to spend some time and maintain
457 * the ACQUIT signal up for a while ( a bus cycle )
458 */
459 vx_inl(chip, STATUS);
460 /* ack */
461 vx_outl(chip, STATUS, VX_STATUS_MEMIRQ_MASK);
462 /* useless read just to spend some time and maintain
463 * the ACQUIT signal up for a while ( a bus cycle ) */
464 vx_inl(chip, STATUS);
465 /* clear */
466 vx_outl(chip, STATUS, 0);
467
468 return 0;
469}
470
471
472/*
473 * vx_validate_irq - enable/disable IRQ
474 */
475static void vx2_validate_irq(struct vx_core *_chip, int enable)
476{
477 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
478
479 /* Set the interrupt enable bit to 1 in CDSP register */
480 if (enable) {
481 /* Set the PCI interrupt enable bit to 1.*/
482 vx_outl(chip, INTCSR, VX_INTCSR_VALUE|VX_PCI_INTERRUPT_MASK);
483 chip->regCDSP |= VX_CDSP_VALID_IRQ_MASK;
484 } else {
485 /* Set the PCI interrupt enable bit to 0. */
486 vx_outl(chip, INTCSR, VX_INTCSR_VALUE&~VX_PCI_INTERRUPT_MASK);
487 chip->regCDSP &= ~VX_CDSP_VALID_IRQ_MASK;
488 }
489 vx_outl(chip, CDSP, chip->regCDSP);
490}
491
492
493/*
494 * write an AKM codec data (24bit)
495 */
496static void vx2_write_codec_reg(struct vx_core *chip, unsigned int data)
497{
498 unsigned int i;
499
500 vx_inl(chip, HIFREQ);
501
502 /* We have to send 24 bits (3 x 8 bits). Start with most signif. Bit */
503 for (i = 0; i < 24; i++, data <<= 1)
504 vx_outl(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0));
505 /* Terminate access to codec registers */
506 vx_inl(chip, RUER);
507}
508
509
510#define AKM_CODEC_POWER_CONTROL_CMD 0xA007
511#define AKM_CODEC_RESET_ON_CMD 0xA100
512#define AKM_CODEC_RESET_OFF_CMD 0xA103
513#define AKM_CODEC_CLOCK_FORMAT_CMD 0xA240
514#define AKM_CODEC_MUTE_CMD 0xA38D
515#define AKM_CODEC_UNMUTE_CMD 0xA30D
516#define AKM_CODEC_LEFT_LEVEL_CMD 0xA400
517#define AKM_CODEC_RIGHT_LEVEL_CMD 0xA500
518
519static const u8 vx2_akm_gains_lut[VX2_AKM_LEVEL_MAX+1] = {
520 0x7f, // [000] = +0.000 dB -> AKM(0x7f) = +0.000 dB error(+0.000 dB)
521 0x7d, // [001] = -0.500 dB -> AKM(0x7d) = -0.572 dB error(-0.072 dB)
522 0x7c, // [002] = -1.000 dB -> AKM(0x7c) = -0.873 dB error(+0.127 dB)
523 0x7a, // [003] = -1.500 dB -> AKM(0x7a) = -1.508 dB error(-0.008 dB)
524 0x79, // [004] = -2.000 dB -> AKM(0x79) = -1.844 dB error(+0.156 dB)
525 0x77, // [005] = -2.500 dB -> AKM(0x77) = -2.557 dB error(-0.057 dB)
526 0x76, // [006] = -3.000 dB -> AKM(0x76) = -2.937 dB error(+0.063 dB)
527 0x75, // [007] = -3.500 dB -> AKM(0x75) = -3.334 dB error(+0.166 dB)
528 0x73, // [008] = -4.000 dB -> AKM(0x73) = -4.188 dB error(-0.188 dB)
529 0x72, // [009] = -4.500 dB -> AKM(0x72) = -4.648 dB error(-0.148 dB)
530 0x71, // [010] = -5.000 dB -> AKM(0x71) = -5.134 dB error(-0.134 dB)
531 0x70, // [011] = -5.500 dB -> AKM(0x70) = -5.649 dB error(-0.149 dB)
532 0x6f, // [012] = -6.000 dB -> AKM(0x6f) = -6.056 dB error(-0.056 dB)
533 0x6d, // [013] = -6.500 dB -> AKM(0x6d) = -6.631 dB error(-0.131 dB)
534 0x6c, // [014] = -7.000 dB -> AKM(0x6c) = -6.933 dB error(+0.067 dB)
535 0x6a, // [015] = -7.500 dB -> AKM(0x6a) = -7.571 dB error(-0.071 dB)
536 0x69, // [016] = -8.000 dB -> AKM(0x69) = -7.909 dB error(+0.091 dB)
537 0x67, // [017] = -8.500 dB -> AKM(0x67) = -8.626 dB error(-0.126 dB)
538 0x66, // [018] = -9.000 dB -> AKM(0x66) = -9.008 dB error(-0.008 dB)
539 0x65, // [019] = -9.500 dB -> AKM(0x65) = -9.407 dB error(+0.093 dB)
540 0x64, // [020] = -10.000 dB -> AKM(0x64) = -9.826 dB error(+0.174 dB)
541 0x62, // [021] = -10.500 dB -> AKM(0x62) = -10.730 dB error(-0.230 dB)
542 0x61, // [022] = -11.000 dB -> AKM(0x61) = -11.219 dB error(-0.219 dB)
543 0x60, // [023] = -11.500 dB -> AKM(0x60) = -11.738 dB error(-0.238 dB)
544 0x5f, // [024] = -12.000 dB -> AKM(0x5f) = -12.149 dB error(-0.149 dB)
545 0x5e, // [025] = -12.500 dB -> AKM(0x5e) = -12.434 dB error(+0.066 dB)
546 0x5c, // [026] = -13.000 dB -> AKM(0x5c) = -13.033 dB error(-0.033 dB)
547 0x5b, // [027] = -13.500 dB -> AKM(0x5b) = -13.350 dB error(+0.150 dB)
548 0x59, // [028] = -14.000 dB -> AKM(0x59) = -14.018 dB error(-0.018 dB)
549 0x58, // [029] = -14.500 dB -> AKM(0x58) = -14.373 dB error(+0.127 dB)
550 0x56, // [030] = -15.000 dB -> AKM(0x56) = -15.130 dB error(-0.130 dB)
551 0x55, // [031] = -15.500 dB -> AKM(0x55) = -15.534 dB error(-0.034 dB)
552 0x54, // [032] = -16.000 dB -> AKM(0x54) = -15.958 dB error(+0.042 dB)
553 0x53, // [033] = -16.500 dB -> AKM(0x53) = -16.404 dB error(+0.096 dB)
554 0x52, // [034] = -17.000 dB -> AKM(0x52) = -16.874 dB error(+0.126 dB)
555 0x51, // [035] = -17.500 dB -> AKM(0x51) = -17.371 dB error(+0.129 dB)
556 0x50, // [036] = -18.000 dB -> AKM(0x50) = -17.898 dB error(+0.102 dB)
557 0x4e, // [037] = -18.500 dB -> AKM(0x4e) = -18.605 dB error(-0.105 dB)
558 0x4d, // [038] = -19.000 dB -> AKM(0x4d) = -18.905 dB error(+0.095 dB)
559 0x4b, // [039] = -19.500 dB -> AKM(0x4b) = -19.538 dB error(-0.038 dB)
560 0x4a, // [040] = -20.000 dB -> AKM(0x4a) = -19.872 dB error(+0.128 dB)
561 0x48, // [041] = -20.500 dB -> AKM(0x48) = -20.583 dB error(-0.083 dB)
562 0x47, // [042] = -21.000 dB -> AKM(0x47) = -20.961 dB error(+0.039 dB)
563 0x46, // [043] = -21.500 dB -> AKM(0x46) = -21.356 dB error(+0.144 dB)
564 0x44, // [044] = -22.000 dB -> AKM(0x44) = -22.206 dB error(-0.206 dB)
565 0x43, // [045] = -22.500 dB -> AKM(0x43) = -22.664 dB error(-0.164 dB)
566 0x42, // [046] = -23.000 dB -> AKM(0x42) = -23.147 dB error(-0.147 dB)
567 0x41, // [047] = -23.500 dB -> AKM(0x41) = -23.659 dB error(-0.159 dB)
568 0x40, // [048] = -24.000 dB -> AKM(0x40) = -24.203 dB error(-0.203 dB)
569 0x3f, // [049] = -24.500 dB -> AKM(0x3f) = -24.635 dB error(-0.135 dB)
570 0x3e, // [050] = -25.000 dB -> AKM(0x3e) = -24.935 dB error(+0.065 dB)
571 0x3c, // [051] = -25.500 dB -> AKM(0x3c) = -25.569 dB error(-0.069 dB)
572 0x3b, // [052] = -26.000 dB -> AKM(0x3b) = -25.904 dB error(+0.096 dB)
573 0x39, // [053] = -26.500 dB -> AKM(0x39) = -26.615 dB error(-0.115 dB)
574 0x38, // [054] = -27.000 dB -> AKM(0x38) = -26.994 dB error(+0.006 dB)
575 0x37, // [055] = -27.500 dB -> AKM(0x37) = -27.390 dB error(+0.110 dB)
576 0x36, // [056] = -28.000 dB -> AKM(0x36) = -27.804 dB error(+0.196 dB)
577 0x34, // [057] = -28.500 dB -> AKM(0x34) = -28.699 dB error(-0.199 dB)
578 0x33, // [058] = -29.000 dB -> AKM(0x33) = -29.183 dB error(-0.183 dB)
579 0x32, // [059] = -29.500 dB -> AKM(0x32) = -29.696 dB error(-0.196 dB)
580 0x31, // [060] = -30.000 dB -> AKM(0x31) = -30.241 dB error(-0.241 dB)
581 0x31, // [061] = -30.500 dB -> AKM(0x31) = -30.241 dB error(+0.259 dB)
582 0x30, // [062] = -31.000 dB -> AKM(0x30) = -30.823 dB error(+0.177 dB)
583 0x2e, // [063] = -31.500 dB -> AKM(0x2e) = -31.610 dB error(-0.110 dB)
584 0x2d, // [064] = -32.000 dB -> AKM(0x2d) = -31.945 dB error(+0.055 dB)
585 0x2b, // [065] = -32.500 dB -> AKM(0x2b) = -32.659 dB error(-0.159 dB)
586 0x2a, // [066] = -33.000 dB -> AKM(0x2a) = -33.038 dB error(-0.038 dB)
587 0x29, // [067] = -33.500 dB -> AKM(0x29) = -33.435 dB error(+0.065 dB)
588 0x28, // [068] = -34.000 dB -> AKM(0x28) = -33.852 dB error(+0.148 dB)
589 0x27, // [069] = -34.500 dB -> AKM(0x27) = -34.289 dB error(+0.211 dB)
590 0x25, // [070] = -35.000 dB -> AKM(0x25) = -35.235 dB error(-0.235 dB)
591 0x24, // [071] = -35.500 dB -> AKM(0x24) = -35.750 dB error(-0.250 dB)
592 0x24, // [072] = -36.000 dB -> AKM(0x24) = -35.750 dB error(+0.250 dB)
593 0x23, // [073] = -36.500 dB -> AKM(0x23) = -36.297 dB error(+0.203 dB)
594 0x22, // [074] = -37.000 dB -> AKM(0x22) = -36.881 dB error(+0.119 dB)
595 0x21, // [075] = -37.500 dB -> AKM(0x21) = -37.508 dB error(-0.008 dB)
596 0x20, // [076] = -38.000 dB -> AKM(0x20) = -38.183 dB error(-0.183 dB)
597 0x1f, // [077] = -38.500 dB -> AKM(0x1f) = -38.726 dB error(-0.226 dB)
598 0x1e, // [078] = -39.000 dB -> AKM(0x1e) = -39.108 dB error(-0.108 dB)
599 0x1d, // [079] = -39.500 dB -> AKM(0x1d) = -39.507 dB error(-0.007 dB)
600 0x1c, // [080] = -40.000 dB -> AKM(0x1c) = -39.926 dB error(+0.074 dB)
601 0x1b, // [081] = -40.500 dB -> AKM(0x1b) = -40.366 dB error(+0.134 dB)
602 0x1a, // [082] = -41.000 dB -> AKM(0x1a) = -40.829 dB error(+0.171 dB)
603 0x19, // [083] = -41.500 dB -> AKM(0x19) = -41.318 dB error(+0.182 dB)
604 0x18, // [084] = -42.000 dB -> AKM(0x18) = -41.837 dB error(+0.163 dB)
605 0x17, // [085] = -42.500 dB -> AKM(0x17) = -42.389 dB error(+0.111 dB)
606 0x16, // [086] = -43.000 dB -> AKM(0x16) = -42.978 dB error(+0.022 dB)
607 0x15, // [087] = -43.500 dB -> AKM(0x15) = -43.610 dB error(-0.110 dB)
608 0x14, // [088] = -44.000 dB -> AKM(0x14) = -44.291 dB error(-0.291 dB)
609 0x14, // [089] = -44.500 dB -> AKM(0x14) = -44.291 dB error(+0.209 dB)
610 0x13, // [090] = -45.000 dB -> AKM(0x13) = -45.031 dB error(-0.031 dB)
611 0x12, // [091] = -45.500 dB -> AKM(0x12) = -45.840 dB error(-0.340 dB)
612 0x12, // [092] = -46.000 dB -> AKM(0x12) = -45.840 dB error(+0.160 dB)
613 0x11, // [093] = -46.500 dB -> AKM(0x11) = -46.731 dB error(-0.231 dB)
614 0x11, // [094] = -47.000 dB -> AKM(0x11) = -46.731 dB error(+0.269 dB)
615 0x10, // [095] = -47.500 dB -> AKM(0x10) = -47.725 dB error(-0.225 dB)
616 0x10, // [096] = -48.000 dB -> AKM(0x10) = -47.725 dB error(+0.275 dB)
617 0x0f, // [097] = -48.500 dB -> AKM(0x0f) = -48.553 dB error(-0.053 dB)
618 0x0e, // [098] = -49.000 dB -> AKM(0x0e) = -49.152 dB error(-0.152 dB)
619 0x0d, // [099] = -49.500 dB -> AKM(0x0d) = -49.796 dB error(-0.296 dB)
620 0x0d, // [100] = -50.000 dB -> AKM(0x0d) = -49.796 dB error(+0.204 dB)
621 0x0c, // [101] = -50.500 dB -> AKM(0x0c) = -50.491 dB error(+0.009 dB)
622 0x0b, // [102] = -51.000 dB -> AKM(0x0b) = -51.247 dB error(-0.247 dB)
623 0x0b, // [103] = -51.500 dB -> AKM(0x0b) = -51.247 dB error(+0.253 dB)
624 0x0a, // [104] = -52.000 dB -> AKM(0x0a) = -52.075 dB error(-0.075 dB)
625 0x0a, // [105] = -52.500 dB -> AKM(0x0a) = -52.075 dB error(+0.425 dB)
626 0x09, // [106] = -53.000 dB -> AKM(0x09) = -52.990 dB error(+0.010 dB)
627 0x09, // [107] = -53.500 dB -> AKM(0x09) = -52.990 dB error(+0.510 dB)
628 0x08, // [108] = -54.000 dB -> AKM(0x08) = -54.013 dB error(-0.013 dB)
629 0x08, // [109] = -54.500 dB -> AKM(0x08) = -54.013 dB error(+0.487 dB)
630 0x07, // [110] = -55.000 dB -> AKM(0x07) = -55.173 dB error(-0.173 dB)
631 0x07, // [111] = -55.500 dB -> AKM(0x07) = -55.173 dB error(+0.327 dB)
632 0x06, // [112] = -56.000 dB -> AKM(0x06) = -56.512 dB error(-0.512 dB)
633 0x06, // [113] = -56.500 dB -> AKM(0x06) = -56.512 dB error(-0.012 dB)
634 0x06, // [114] = -57.000 dB -> AKM(0x06) = -56.512 dB error(+0.488 dB)
635 0x05, // [115] = -57.500 dB -> AKM(0x05) = -58.095 dB error(-0.595 dB)
636 0x05, // [116] = -58.000 dB -> AKM(0x05) = -58.095 dB error(-0.095 dB)
637 0x05, // [117] = -58.500 dB -> AKM(0x05) = -58.095 dB error(+0.405 dB)
638 0x05, // [118] = -59.000 dB -> AKM(0x05) = -58.095 dB error(+0.905 dB)
639 0x04, // [119] = -59.500 dB -> AKM(0x04) = -60.034 dB error(-0.534 dB)
640 0x04, // [120] = -60.000 dB -> AKM(0x04) = -60.034 dB error(-0.034 dB)
641 0x04, // [121] = -60.500 dB -> AKM(0x04) = -60.034 dB error(+0.466 dB)
642 0x04, // [122] = -61.000 dB -> AKM(0x04) = -60.034 dB error(+0.966 dB)
643 0x03, // [123] = -61.500 dB -> AKM(0x03) = -62.532 dB error(-1.032 dB)
644 0x03, // [124] = -62.000 dB -> AKM(0x03) = -62.532 dB error(-0.532 dB)
645 0x03, // [125] = -62.500 dB -> AKM(0x03) = -62.532 dB error(-0.032 dB)
646 0x03, // [126] = -63.000 dB -> AKM(0x03) = -62.532 dB error(+0.468 dB)
647 0x03, // [127] = -63.500 dB -> AKM(0x03) = -62.532 dB error(+0.968 dB)
648 0x03, // [128] = -64.000 dB -> AKM(0x03) = -62.532 dB error(+1.468 dB)
649 0x02, // [129] = -64.500 dB -> AKM(0x02) = -66.054 dB error(-1.554 dB)
650 0x02, // [130] = -65.000 dB -> AKM(0x02) = -66.054 dB error(-1.054 dB)
651 0x02, // [131] = -65.500 dB -> AKM(0x02) = -66.054 dB error(-0.554 dB)
652 0x02, // [132] = -66.000 dB -> AKM(0x02) = -66.054 dB error(-0.054 dB)
653 0x02, // [133] = -66.500 dB -> AKM(0x02) = -66.054 dB error(+0.446 dB)
654 0x02, // [134] = -67.000 dB -> AKM(0x02) = -66.054 dB error(+0.946 dB)
655 0x02, // [135] = -67.500 dB -> AKM(0x02) = -66.054 dB error(+1.446 dB)
656 0x02, // [136] = -68.000 dB -> AKM(0x02) = -66.054 dB error(+1.946 dB)
657 0x02, // [137] = -68.500 dB -> AKM(0x02) = -66.054 dB error(+2.446 dB)
658 0x02, // [138] = -69.000 dB -> AKM(0x02) = -66.054 dB error(+2.946 dB)
659 0x01, // [139] = -69.500 dB -> AKM(0x01) = -72.075 dB error(-2.575 dB)
660 0x01, // [140] = -70.000 dB -> AKM(0x01) = -72.075 dB error(-2.075 dB)
661 0x01, // [141] = -70.500 dB -> AKM(0x01) = -72.075 dB error(-1.575 dB)
662 0x01, // [142] = -71.000 dB -> AKM(0x01) = -72.075 dB error(-1.075 dB)
663 0x01, // [143] = -71.500 dB -> AKM(0x01) = -72.075 dB error(-0.575 dB)
664 0x01, // [144] = -72.000 dB -> AKM(0x01) = -72.075 dB error(-0.075 dB)
665 0x01, // [145] = -72.500 dB -> AKM(0x01) = -72.075 dB error(+0.425 dB)
666 0x01, // [146] = -73.000 dB -> AKM(0x01) = -72.075 dB error(+0.925 dB)
667 0x00}; // [147] = -73.500 dB -> AKM(0x00) = mute error(+infini)
668
669/*
670 * pseudo-codec write entry
671 */
672static void vx2_write_akm(struct vx_core *chip, int reg, unsigned int data)
673{
674 unsigned int val;
675
676 if (reg == XX_CODEC_DAC_CONTROL_REGISTER) {
677 vx2_write_codec_reg(chip, data ? AKM_CODEC_MUTE_CMD : AKM_CODEC_UNMUTE_CMD);
678 return;
679 }
680
681 /* `data' is a value between 0x0 and VX2_AKM_LEVEL_MAX = 0x093, in the case of the AKM codecs, we need
682 a look up table, as there is no linear matching between the driver codec values
683 and the real dBu value
684 */
685 if (snd_BUG_ON(data >= sizeof(vx2_akm_gains_lut)))
686 return;
687
688 switch (reg) {
689 case XX_CODEC_LEVEL_LEFT_REGISTER:
690 val = AKM_CODEC_LEFT_LEVEL_CMD;
691 break;
692 case XX_CODEC_LEVEL_RIGHT_REGISTER:
693 val = AKM_CODEC_RIGHT_LEVEL_CMD;
694 break;
695 default:
696 snd_BUG();
697 return;
698 }
699 val |= vx2_akm_gains_lut[data];
700
701 vx2_write_codec_reg(chip, val);
702}
703
704
705/*
706 * write codec bit for old VX222 board
707 */
708static void vx2_old_write_codec_bit(struct vx_core *chip, int codec, unsigned int data)
709{
710 int i;
711
712 /* activate access to codec registers */
713 vx_inl(chip, HIFREQ);
714
715 for (i = 0; i < 24; i++, data <<= 1)
716 vx_outl(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0));
717
718 /* Terminate access to codec registers */
719 vx_inl(chip, RUER);
720}
721
722
723/*
724 * reset codec bit
725 */
726static void vx2_reset_codec(struct vx_core *_chip)
727{
728 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
729
730 /* Set the reset CODEC bit to 0. */
731 vx_outl(chip, CDSP, chip->regCDSP &~ VX_CDSP_CODEC_RESET_MASK);
732 vx_inl(chip, CDSP);
733 msleep(10);
734 /* Set the reset CODEC bit to 1. */
735 chip->regCDSP |= VX_CDSP_CODEC_RESET_MASK;
736 vx_outl(chip, CDSP, chip->regCDSP);
737 vx_inl(chip, CDSP);
738 if (_chip->type == VX_TYPE_BOARD) {
739 msleep(1);
740 return;
741 }
742
743 msleep(5); /* additionnel wait time for AKM's */
744
745 vx2_write_codec_reg(_chip, AKM_CODEC_POWER_CONTROL_CMD); /* DAC power up, ADC power up, Vref power down */
746
747 vx2_write_codec_reg(_chip, AKM_CODEC_CLOCK_FORMAT_CMD); /* default */
748 vx2_write_codec_reg(_chip, AKM_CODEC_MUTE_CMD); /* Mute = ON ,Deemphasis = OFF */
749 vx2_write_codec_reg(_chip, AKM_CODEC_RESET_OFF_CMD); /* DAC and ADC normal operation */
750
751 if (_chip->type == VX_TYPE_MIC) {
752 /* set up the micro input selector */
753 chip->regSELMIC = MICRO_SELECT_INPUT_NORM |
754 MICRO_SELECT_PREAMPLI_G_0 |
755 MICRO_SELECT_NOISE_T_52DB;
756
757 /* reset phantom power supply */
758 chip->regSELMIC &= ~MICRO_SELECT_PHANTOM_ALIM;
759
760 vx_outl(_chip, SELMIC, chip->regSELMIC);
761 }
762}
763
764
765/*
766 * change the audio source
767 */
768static void vx2_change_audio_source(struct vx_core *_chip, int src)
769{
770 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
771
772 switch (src) {
773 case VX_AUDIO_SRC_DIGITAL:
774 chip->regCFG |= VX_CFG_DATAIN_SEL_MASK;
775 break;
776 default:
777 chip->regCFG &= ~VX_CFG_DATAIN_SEL_MASK;
778 break;
779 }
780 vx_outl(chip, CFG, chip->regCFG);
781}
782
783
784/*
785 * set the clock source
786 */
787static void vx2_set_clock_source(struct vx_core *_chip, int source)
788{
789 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
790
791 if (source == INTERNAL_QUARTZ)
792 chip->regCFG &= ~VX_CFG_CLOCKIN_SEL_MASK;
793 else
794 chip->regCFG |= VX_CFG_CLOCKIN_SEL_MASK;
795 vx_outl(chip, CFG, chip->regCFG);
796}
797
798/*
799 * reset the board
800 */
801static void vx2_reset_board(struct vx_core *_chip, int cold_reset)
802{
803 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
804
805 /* initialize the register values */
806 chip->regCDSP = VX_CDSP_CODEC_RESET_MASK | VX_CDSP_DSP_RESET_MASK ;
807 chip->regCFG = 0;
808}
809
810
811
812/*
813 * input level controls for VX222 Mic
814 */
815
816/* Micro level is specified to be adjustable from -96dB to 63 dB (board coded 0x00 ... 318),
817 * 318 = 210 + 36 + 36 + 36 (210 = +9dB variable) (3 * 36 = 3 steps of 18dB pre ampli)
818 * as we will mute if less than -110dB, so let's simply use line input coded levels and add constant offset !
819 */
820#define V2_MICRO_LEVEL_RANGE (318 - 255)
821
822static void vx2_set_input_level(struct snd_vx222 *chip)
823{
824 int i, miclevel, preamp;
825 unsigned int data;
826
827 miclevel = chip->mic_level;
828 miclevel += V2_MICRO_LEVEL_RANGE; /* add 318 - 0xff */
829 preamp = 0;
830 while (miclevel > 210) { /* limitation to +9dB of 3310 real gain */
831 preamp++; /* raise pre ampli + 18dB */
832 miclevel -= (18 * 2); /* lower level 18 dB (*2 because of 0.5 dB steps !) */
833 }
834 if (snd_BUG_ON(preamp >= 4))
835 return;
836
837 /* set pre-amp level */
838 chip->regSELMIC &= ~MICRO_SELECT_PREAMPLI_MASK;
839 chip->regSELMIC |= (preamp << MICRO_SELECT_PREAMPLI_OFFSET) & MICRO_SELECT_PREAMPLI_MASK;
840 vx_outl(chip, SELMIC, chip->regSELMIC);
841
842 data = (unsigned int)miclevel << 16 |
843 (unsigned int)chip->input_level[1] << 8 |
844 (unsigned int)chip->input_level[0];
845 vx_inl(chip, DATA); /* Activate input level programming */
846
847 /* We have to send 32 bits (4 x 8 bits) */
848 for (i = 0; i < 32; i++, data <<= 1)
849 vx_outl(chip, DATA, ((data & 0x80000000) ? VX_DATA_CODEC_MASK : 0));
850
851 vx_inl(chip, RUER); /* Terminate input level programming */
852}
853
854
855#define MIC_LEVEL_MAX 0xff
856
857static const DECLARE_TLV_DB_SCALE(db_scale_mic, -6450, 50, 0);
858
859/*
860 * controls API for input levels
861 */
862
863/* input levels */
864static int vx_input_level_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
865{
866 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
867 uinfo->count = 2;
868 uinfo->value.integer.min = 0;
869 uinfo->value.integer.max = MIC_LEVEL_MAX;
870 return 0;
871}
872
873static int vx_input_level_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
874{
875 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
876 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
877 mutex_lock(&_chip->mixer_mutex);
878 ucontrol->value.integer.value[0] = chip->input_level[0];
879 ucontrol->value.integer.value[1] = chip->input_level[1];
880 mutex_unlock(&_chip->mixer_mutex);
881 return 0;
882}
883
884static int vx_input_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
885{
886 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
887 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
888 if (ucontrol->value.integer.value[0] < 0 ||
889 ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
890 return -EINVAL;
891 if (ucontrol->value.integer.value[1] < 0 ||
892 ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
893 return -EINVAL;
894 mutex_lock(&_chip->mixer_mutex);
895 if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
896 chip->input_level[1] != ucontrol->value.integer.value[1]) {
897 chip->input_level[0] = ucontrol->value.integer.value[0];
898 chip->input_level[1] = ucontrol->value.integer.value[1];
899 vx2_set_input_level(chip);
900 mutex_unlock(&_chip->mixer_mutex);
901 return 1;
902 }
903 mutex_unlock(&_chip->mixer_mutex);
904 return 0;
905}
906
907/* mic level */
908static int vx_mic_level_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
909{
910 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
911 uinfo->count = 1;
912 uinfo->value.integer.min = 0;
913 uinfo->value.integer.max = MIC_LEVEL_MAX;
914 return 0;
915}
916
917static int vx_mic_level_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
918{
919 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
920 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
921 ucontrol->value.integer.value[0] = chip->mic_level;
922 return 0;
923}
924
925static int vx_mic_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
926{
927 struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
928 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
929 if (ucontrol->value.integer.value[0] < 0 ||
930 ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
931 return -EINVAL;
932 mutex_lock(&_chip->mixer_mutex);
933 if (chip->mic_level != ucontrol->value.integer.value[0]) {
934 chip->mic_level = ucontrol->value.integer.value[0];
935 vx2_set_input_level(chip);
936 mutex_unlock(&_chip->mixer_mutex);
937 return 1;
938 }
939 mutex_unlock(&_chip->mixer_mutex);
940 return 0;
941}
942
943static struct snd_kcontrol_new vx_control_input_level = {
944 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
945 .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
946 SNDRV_CTL_ELEM_ACCESS_TLV_READ),
947 .name = "Capture Volume",
948 .info = vx_input_level_info,
949 .get = vx_input_level_get,
950 .put = vx_input_level_put,
951 .tlv = { .p = db_scale_mic },
952};
953
954static struct snd_kcontrol_new vx_control_mic_level = {
955 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
956 .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
957 SNDRV_CTL_ELEM_ACCESS_TLV_READ),
958 .name = "Mic Capture Volume",
959 .info = vx_mic_level_info,
960 .get = vx_mic_level_get,
961 .put = vx_mic_level_put,
962 .tlv = { .p = db_scale_mic },
963};
964
965/*
966 * FIXME: compressor/limiter implementation is missing yet...
967 */
968
969static int vx2_add_mic_controls(struct vx_core *_chip)
970{
971 struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
972 int err;
973
974 if (_chip->type != VX_TYPE_MIC)
975 return 0;
976
977 /* mute input levels */
978 chip->input_level[0] = chip->input_level[1] = 0;
979 chip->mic_level = 0;
980 vx2_set_input_level(chip);
981
982 /* controls */
983 if ((err = snd_ctl_add(_chip->card, snd_ctl_new1(&vx_control_input_level, chip))) < 0)
984 return err;
985 if ((err = snd_ctl_add(_chip->card, snd_ctl_new1(&vx_control_mic_level, chip))) < 0)
986 return err;
987
988 return 0;
989}
990
991
992/*
993 * callbacks
994 */
995struct snd_vx_ops vx222_ops = {
996 .in8 = vx2_inb,
997 .in32 = vx2_inl,
998 .out8 = vx2_outb,
999 .out32 = vx2_outl,
1000 .test_and_ack = vx2_test_and_ack,
1001 .validate_irq = vx2_validate_irq,
1002 .akm_write = vx2_write_akm,
1003 .reset_codec = vx2_reset_codec,
1004 .change_audio_source = vx2_change_audio_source,
1005 .set_clock_source = vx2_set_clock_source,
1006 .load_dsp = vx2_load_dsp,
1007 .reset_dsp = vx2_reset_dsp,
1008 .reset_board = vx2_reset_board,
1009 .dma_write = vx2_dma_write,
1010 .dma_read = vx2_dma_read,
1011 .add_controls = vx2_add_mic_controls,
1012};
1013
1014/* for old VX222 board */
1015struct snd_vx_ops vx222_old_ops = {
1016 .in8 = vx2_inb,
1017 .in32 = vx2_inl,
1018 .out8 = vx2_outb,
1019 .out32 = vx2_outl,
1020 .test_and_ack = vx2_test_and_ack,
1021 .validate_irq = vx2_validate_irq,
1022 .write_codec = vx2_old_write_codec_bit,
1023 .reset_codec = vx2_reset_codec,
1024 .change_audio_source = vx2_change_audio_source,
1025 .set_clock_source = vx2_set_clock_source,
1026 .load_dsp = vx2_load_dsp,
1027 .reset_dsp = vx2_reset_dsp,
1028 .reset_board = vx2_reset_board,
1029 .dma_write = vx2_dma_write,
1030 .dma_read = vx2_dma_read,
1031};
1032