Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
4 *
5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
7 *
8 * This is mainly a variation of 8250.c, credits go to authors mentioned
9 * therein. In fact this driver should be merged into the generic 8250.c
10 * infrastructure perhaps using a 8250_sparc.c module.
11 *
12 * Fixed to use tty_get_baud_rate().
13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 *
15 * Converted to new 2.5.x UART layer.
16 * David S. Miller (davem@davemloft.net), 2002-Jul-29
17 */
18
19#include <linux/module.h>
20#include <linux/kernel.h>
21#include <linux/spinlock.h>
22#include <linux/errno.h>
23#include <linux/tty.h>
24#include <linux/tty_flip.h>
25#include <linux/major.h>
26#include <linux/string.h>
27#include <linux/ptrace.h>
28#include <linux/ioport.h>
29#include <linux/circ_buf.h>
30#include <linux/serial.h>
31#include <linux/sysrq.h>
32#include <linux/console.h>
33#include <linux/slab.h>
34#ifdef CONFIG_SERIO
35#include <linux/serio.h>
36#endif
37#include <linux/serial_reg.h>
38#include <linux/init.h>
39#include <linux/delay.h>
40#include <linux/of_device.h>
41
42#include <asm/io.h>
43#include <asm/irq.h>
44#include <asm/prom.h>
45#include <asm/setup.h>
46
47#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
48#define SUPPORT_SYSRQ
49#endif
50
51#include <linux/serial_core.h>
52#include <linux/sunserialcore.h>
53
54/* We are on a NS PC87303 clocked with 24.0 MHz, which results
55 * in a UART clock of 1.8462 MHz.
56 */
57#define SU_BASE_BAUD (1846200 / 16)
58
59enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
60static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
61
62struct serial_uart_config {
63 char *name;
64 int dfl_xmit_fifo_size;
65 int flags;
66};
67
68/*
69 * Here we define the default xmit fifo size used for each type of UART.
70 */
71static const struct serial_uart_config uart_config[] = {
72 { "unknown", 1, 0 },
73 { "8250", 1, 0 },
74 { "16450", 1, 0 },
75 { "16550", 1, 0 },
76 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
77 { "Cirrus", 1, 0 },
78 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
79 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
80 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
81 { "Startech", 1, 0 },
82 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
83 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
84 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
85 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
86};
87
88struct uart_sunsu_port {
89 struct uart_port port;
90 unsigned char acr;
91 unsigned char ier;
92 unsigned short rev;
93 unsigned char lcr;
94 unsigned int lsr_break_flag;
95 unsigned int cflag;
96
97 /* Probing information. */
98 enum su_type su_type;
99 unsigned int type_probed; /* XXX Stupid */
100 unsigned long reg_size;
101
102#ifdef CONFIG_SERIO
103 struct serio serio;
104 int serio_open;
105#endif
106};
107
108static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
109{
110 offset <<= up->port.regshift;
111
112 switch (up->port.iotype) {
113 case UPIO_HUB6:
114 outb(up->port.hub6 - 1 + offset, up->port.iobase);
115 return inb(up->port.iobase + 1);
116
117 case UPIO_MEM:
118 return readb(up->port.membase + offset);
119
120 default:
121 return inb(up->port.iobase + offset);
122 }
123}
124
125static void serial_out(struct uart_sunsu_port *up, int offset, int value)
126{
127#ifndef CONFIG_SPARC64
128 /*
129 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
130 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
131 * gate outputs a logical one. Since we use level triggered interrupts
132 * we have lockup and watchdog reset. We cannot mask IRQ because
133 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
134 * This problem is similar to what Alpha people suffer, see serial.c.
135 */
136 if (offset == UART_MCR)
137 value |= UART_MCR_OUT2;
138#endif
139 offset <<= up->port.regshift;
140
141 switch (up->port.iotype) {
142 case UPIO_HUB6:
143 outb(up->port.hub6 - 1 + offset, up->port.iobase);
144 outb(value, up->port.iobase + 1);
145 break;
146
147 case UPIO_MEM:
148 writeb(value, up->port.membase + offset);
149 break;
150
151 default:
152 outb(value, up->port.iobase + offset);
153 }
154}
155
156/*
157 * We used to support using pause I/O for certain machines. We
158 * haven't supported this for a while, but just in case it's badly
159 * needed for certain old 386 machines, I've left these #define's
160 * in....
161 */
162#define serial_inp(up, offset) serial_in(up, offset)
163#define serial_outp(up, offset, value) serial_out(up, offset, value)
164
165
166/*
167 * For the 16C950
168 */
169static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
170{
171 serial_out(up, UART_SCR, offset);
172 serial_out(up, UART_ICR, value);
173}
174
175#if 0 /* Unused currently */
176static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
177{
178 unsigned int value;
179
180 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
181 serial_out(up, UART_SCR, offset);
182 value = serial_in(up, UART_ICR);
183 serial_icr_write(up, UART_ACR, up->acr);
184
185 return value;
186}
187#endif
188
189#ifdef CONFIG_SERIAL_8250_RSA
190/*
191 * Attempts to turn on the RSA FIFO. Returns zero on failure.
192 * We set the port uart clock rate if we succeed.
193 */
194static int __enable_rsa(struct uart_sunsu_port *up)
195{
196 unsigned char mode;
197 int result;
198
199 mode = serial_inp(up, UART_RSA_MSR);
200 result = mode & UART_RSA_MSR_FIFO;
201
202 if (!result) {
203 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
204 mode = serial_inp(up, UART_RSA_MSR);
205 result = mode & UART_RSA_MSR_FIFO;
206 }
207
208 if (result)
209 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
210
211 return result;
212}
213
214static void enable_rsa(struct uart_sunsu_port *up)
215{
216 if (up->port.type == PORT_RSA) {
217 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
218 spin_lock_irq(&up->port.lock);
219 __enable_rsa(up);
220 spin_unlock_irq(&up->port.lock);
221 }
222 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
223 serial_outp(up, UART_RSA_FRR, 0);
224 }
225}
226
227/*
228 * Attempts to turn off the RSA FIFO. Returns zero on failure.
229 * It is unknown why interrupts were disabled in here. However,
230 * the caller is expected to preserve this behaviour by grabbing
231 * the spinlock before calling this function.
232 */
233static void disable_rsa(struct uart_sunsu_port *up)
234{
235 unsigned char mode;
236 int result;
237
238 if (up->port.type == PORT_RSA &&
239 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
240 spin_lock_irq(&up->port.lock);
241
242 mode = serial_inp(up, UART_RSA_MSR);
243 result = !(mode & UART_RSA_MSR_FIFO);
244
245 if (!result) {
246 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
247 mode = serial_inp(up, UART_RSA_MSR);
248 result = !(mode & UART_RSA_MSR_FIFO);
249 }
250
251 if (result)
252 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
253 spin_unlock_irq(&up->port.lock);
254 }
255}
256#endif /* CONFIG_SERIAL_8250_RSA */
257
258static inline void __stop_tx(struct uart_sunsu_port *p)
259{
260 if (p->ier & UART_IER_THRI) {
261 p->ier &= ~UART_IER_THRI;
262 serial_out(p, UART_IER, p->ier);
263 }
264}
265
266static void sunsu_stop_tx(struct uart_port *port)
267{
268 struct uart_sunsu_port *up =
269 container_of(port, struct uart_sunsu_port, port);
270
271 __stop_tx(up);
272
273 /*
274 * We really want to stop the transmitter from sending.
275 */
276 if (up->port.type == PORT_16C950) {
277 up->acr |= UART_ACR_TXDIS;
278 serial_icr_write(up, UART_ACR, up->acr);
279 }
280}
281
282static void sunsu_start_tx(struct uart_port *port)
283{
284 struct uart_sunsu_port *up =
285 container_of(port, struct uart_sunsu_port, port);
286
287 if (!(up->ier & UART_IER_THRI)) {
288 up->ier |= UART_IER_THRI;
289 serial_out(up, UART_IER, up->ier);
290 }
291
292 /*
293 * Re-enable the transmitter if we disabled it.
294 */
295 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
296 up->acr &= ~UART_ACR_TXDIS;
297 serial_icr_write(up, UART_ACR, up->acr);
298 }
299}
300
301static void sunsu_stop_rx(struct uart_port *port)
302{
303 struct uart_sunsu_port *up =
304 container_of(port, struct uart_sunsu_port, port);
305
306 up->ier &= ~UART_IER_RLSI;
307 up->port.read_status_mask &= ~UART_LSR_DR;
308 serial_out(up, UART_IER, up->ier);
309}
310
311static void sunsu_enable_ms(struct uart_port *port)
312{
313 struct uart_sunsu_port *up =
314 container_of(port, struct uart_sunsu_port, port);
315 unsigned long flags;
316
317 spin_lock_irqsave(&up->port.lock, flags);
318 up->ier |= UART_IER_MSI;
319 serial_out(up, UART_IER, up->ier);
320 spin_unlock_irqrestore(&up->port.lock, flags);
321}
322
323static void
324receive_chars(struct uart_sunsu_port *up, unsigned char *status)
325{
326 struct tty_port *port = &up->port.state->port;
327 unsigned char ch, flag;
328 int max_count = 256;
329 int saw_console_brk = 0;
330
331 do {
332 ch = serial_inp(up, UART_RX);
333 flag = TTY_NORMAL;
334 up->port.icount.rx++;
335
336 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
337 UART_LSR_FE | UART_LSR_OE))) {
338 /*
339 * For statistics only
340 */
341 if (*status & UART_LSR_BI) {
342 *status &= ~(UART_LSR_FE | UART_LSR_PE);
343 up->port.icount.brk++;
344 if (up->port.cons != NULL &&
345 up->port.line == up->port.cons->index)
346 saw_console_brk = 1;
347 /*
348 * We do the SysRQ and SAK checking
349 * here because otherwise the break
350 * may get masked by ignore_status_mask
351 * or read_status_mask.
352 */
353 if (uart_handle_break(&up->port))
354 goto ignore_char;
355 } else if (*status & UART_LSR_PE)
356 up->port.icount.parity++;
357 else if (*status & UART_LSR_FE)
358 up->port.icount.frame++;
359 if (*status & UART_LSR_OE)
360 up->port.icount.overrun++;
361
362 /*
363 * Mask off conditions which should be ingored.
364 */
365 *status &= up->port.read_status_mask;
366
367 if (up->port.cons != NULL &&
368 up->port.line == up->port.cons->index) {
369 /* Recover the break flag from console xmit */
370 *status |= up->lsr_break_flag;
371 up->lsr_break_flag = 0;
372 }
373
374 if (*status & UART_LSR_BI) {
375 flag = TTY_BREAK;
376 } else if (*status & UART_LSR_PE)
377 flag = TTY_PARITY;
378 else if (*status & UART_LSR_FE)
379 flag = TTY_FRAME;
380 }
381 if (uart_handle_sysrq_char(&up->port, ch))
382 goto ignore_char;
383 if ((*status & up->port.ignore_status_mask) == 0)
384 tty_insert_flip_char(port, ch, flag);
385 if (*status & UART_LSR_OE)
386 /*
387 * Overrun is special, since it's reported
388 * immediately, and doesn't affect the current
389 * character.
390 */
391 tty_insert_flip_char(port, 0, TTY_OVERRUN);
392 ignore_char:
393 *status = serial_inp(up, UART_LSR);
394 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
395
396 if (saw_console_brk)
397 sun_do_break();
398}
399
400static void transmit_chars(struct uart_sunsu_port *up)
401{
402 struct circ_buf *xmit = &up->port.state->xmit;
403 int count;
404
405 if (up->port.x_char) {
406 serial_outp(up, UART_TX, up->port.x_char);
407 up->port.icount.tx++;
408 up->port.x_char = 0;
409 return;
410 }
411 if (uart_tx_stopped(&up->port)) {
412 sunsu_stop_tx(&up->port);
413 return;
414 }
415 if (uart_circ_empty(xmit)) {
416 __stop_tx(up);
417 return;
418 }
419
420 count = up->port.fifosize;
421 do {
422 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
423 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
424 up->port.icount.tx++;
425 if (uart_circ_empty(xmit))
426 break;
427 } while (--count > 0);
428
429 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
430 uart_write_wakeup(&up->port);
431
432 if (uart_circ_empty(xmit))
433 __stop_tx(up);
434}
435
436static void check_modem_status(struct uart_sunsu_port *up)
437{
438 int status;
439
440 status = serial_in(up, UART_MSR);
441
442 if ((status & UART_MSR_ANY_DELTA) == 0)
443 return;
444
445 if (status & UART_MSR_TERI)
446 up->port.icount.rng++;
447 if (status & UART_MSR_DDSR)
448 up->port.icount.dsr++;
449 if (status & UART_MSR_DDCD)
450 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
451 if (status & UART_MSR_DCTS)
452 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
453
454 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
455}
456
457static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
458{
459 struct uart_sunsu_port *up = dev_id;
460 unsigned long flags;
461 unsigned char status;
462
463 spin_lock_irqsave(&up->port.lock, flags);
464
465 do {
466 status = serial_inp(up, UART_LSR);
467 if (status & UART_LSR_DR)
468 receive_chars(up, &status);
469 check_modem_status(up);
470 if (status & UART_LSR_THRE)
471 transmit_chars(up);
472
473 spin_unlock_irqrestore(&up->port.lock, flags);
474
475 tty_flip_buffer_push(&up->port.state->port);
476
477 spin_lock_irqsave(&up->port.lock, flags);
478
479 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
480
481 spin_unlock_irqrestore(&up->port.lock, flags);
482
483 return IRQ_HANDLED;
484}
485
486/* Separate interrupt handling path for keyboard/mouse ports. */
487
488static void
489sunsu_change_speed(struct uart_port *port, unsigned int cflag,
490 unsigned int iflag, unsigned int quot);
491
492static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
493{
494 unsigned int cur_cflag = up->cflag;
495 int quot, new_baud;
496
497 up->cflag &= ~CBAUD;
498 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
499
500 quot = up->port.uartclk / (16 * new_baud);
501
502 sunsu_change_speed(&up->port, up->cflag, 0, quot);
503}
504
505static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
506{
507 do {
508 unsigned char ch = serial_inp(up, UART_RX);
509
510 /* Stop-A is handled by drivers/char/keyboard.c now. */
511 if (up->su_type == SU_PORT_KBD) {
512#ifdef CONFIG_SERIO
513 serio_interrupt(&up->serio, ch, 0);
514#endif
515 } else if (up->su_type == SU_PORT_MS) {
516 int ret = suncore_mouse_baud_detection(ch, is_break);
517
518 switch (ret) {
519 case 2:
520 sunsu_change_mouse_baud(up);
521 /* fallthru */
522 case 1:
523 break;
524
525 case 0:
526#ifdef CONFIG_SERIO
527 serio_interrupt(&up->serio, ch, 0);
528#endif
529 break;
530 }
531 }
532 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
533}
534
535static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
536{
537 struct uart_sunsu_port *up = dev_id;
538
539 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
540 unsigned char status = serial_inp(up, UART_LSR);
541
542 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
543 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
544 }
545
546 return IRQ_HANDLED;
547}
548
549static unsigned int sunsu_tx_empty(struct uart_port *port)
550{
551 struct uart_sunsu_port *up =
552 container_of(port, struct uart_sunsu_port, port);
553 unsigned long flags;
554 unsigned int ret;
555
556 spin_lock_irqsave(&up->port.lock, flags);
557 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
558 spin_unlock_irqrestore(&up->port.lock, flags);
559
560 return ret;
561}
562
563static unsigned int sunsu_get_mctrl(struct uart_port *port)
564{
565 struct uart_sunsu_port *up =
566 container_of(port, struct uart_sunsu_port, port);
567 unsigned char status;
568 unsigned int ret;
569
570 status = serial_in(up, UART_MSR);
571
572 ret = 0;
573 if (status & UART_MSR_DCD)
574 ret |= TIOCM_CAR;
575 if (status & UART_MSR_RI)
576 ret |= TIOCM_RNG;
577 if (status & UART_MSR_DSR)
578 ret |= TIOCM_DSR;
579 if (status & UART_MSR_CTS)
580 ret |= TIOCM_CTS;
581 return ret;
582}
583
584static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
585{
586 struct uart_sunsu_port *up =
587 container_of(port, struct uart_sunsu_port, port);
588 unsigned char mcr = 0;
589
590 if (mctrl & TIOCM_RTS)
591 mcr |= UART_MCR_RTS;
592 if (mctrl & TIOCM_DTR)
593 mcr |= UART_MCR_DTR;
594 if (mctrl & TIOCM_OUT1)
595 mcr |= UART_MCR_OUT1;
596 if (mctrl & TIOCM_OUT2)
597 mcr |= UART_MCR_OUT2;
598 if (mctrl & TIOCM_LOOP)
599 mcr |= UART_MCR_LOOP;
600
601 serial_out(up, UART_MCR, mcr);
602}
603
604static void sunsu_break_ctl(struct uart_port *port, int break_state)
605{
606 struct uart_sunsu_port *up =
607 container_of(port, struct uart_sunsu_port, port);
608 unsigned long flags;
609
610 spin_lock_irqsave(&up->port.lock, flags);
611 if (break_state == -1)
612 up->lcr |= UART_LCR_SBC;
613 else
614 up->lcr &= ~UART_LCR_SBC;
615 serial_out(up, UART_LCR, up->lcr);
616 spin_unlock_irqrestore(&up->port.lock, flags);
617}
618
619static int sunsu_startup(struct uart_port *port)
620{
621 struct uart_sunsu_port *up =
622 container_of(port, struct uart_sunsu_port, port);
623 unsigned long flags;
624 int retval;
625
626 if (up->port.type == PORT_16C950) {
627 /* Wake up and initialize UART */
628 up->acr = 0;
629 serial_outp(up, UART_LCR, 0xBF);
630 serial_outp(up, UART_EFR, UART_EFR_ECB);
631 serial_outp(up, UART_IER, 0);
632 serial_outp(up, UART_LCR, 0);
633 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
634 serial_outp(up, UART_LCR, 0xBF);
635 serial_outp(up, UART_EFR, UART_EFR_ECB);
636 serial_outp(up, UART_LCR, 0);
637 }
638
639#ifdef CONFIG_SERIAL_8250_RSA
640 /*
641 * If this is an RSA port, see if we can kick it up to the
642 * higher speed clock.
643 */
644 enable_rsa(up);
645#endif
646
647 /*
648 * Clear the FIFO buffers and disable them.
649 * (they will be reenabled in set_termios())
650 */
651 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
652 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
653 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
654 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
655 serial_outp(up, UART_FCR, 0);
656 }
657
658 /*
659 * Clear the interrupt registers.
660 */
661 (void) serial_inp(up, UART_LSR);
662 (void) serial_inp(up, UART_RX);
663 (void) serial_inp(up, UART_IIR);
664 (void) serial_inp(up, UART_MSR);
665
666 /*
667 * At this point, there's no way the LSR could still be 0xff;
668 * if it is, then bail out, because there's likely no UART
669 * here.
670 */
671 if (!(up->port.flags & UPF_BUGGY_UART) &&
672 (serial_inp(up, UART_LSR) == 0xff)) {
673 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
674 return -ENODEV;
675 }
676
677 if (up->su_type != SU_PORT_PORT) {
678 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
679 IRQF_SHARED, su_typev[up->su_type], up);
680 } else {
681 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
682 IRQF_SHARED, su_typev[up->su_type], up);
683 }
684 if (retval) {
685 printk("su: Cannot register IRQ %d\n", up->port.irq);
686 return retval;
687 }
688
689 /*
690 * Now, initialize the UART
691 */
692 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
693
694 spin_lock_irqsave(&up->port.lock, flags);
695
696 up->port.mctrl |= TIOCM_OUT2;
697
698 sunsu_set_mctrl(&up->port, up->port.mctrl);
699 spin_unlock_irqrestore(&up->port.lock, flags);
700
701 /*
702 * Finally, enable interrupts. Note: Modem status interrupts
703 * are set via set_termios(), which will be occurring imminently
704 * anyway, so we don't enable them here.
705 */
706 up->ier = UART_IER_RLSI | UART_IER_RDI;
707 serial_outp(up, UART_IER, up->ier);
708
709 if (up->port.flags & UPF_FOURPORT) {
710 unsigned int icp;
711 /*
712 * Enable interrupts on the AST Fourport board
713 */
714 icp = (up->port.iobase & 0xfe0) | 0x01f;
715 outb_p(0x80, icp);
716 (void) inb_p(icp);
717 }
718
719 /*
720 * And clear the interrupt registers again for luck.
721 */
722 (void) serial_inp(up, UART_LSR);
723 (void) serial_inp(up, UART_RX);
724 (void) serial_inp(up, UART_IIR);
725 (void) serial_inp(up, UART_MSR);
726
727 return 0;
728}
729
730static void sunsu_shutdown(struct uart_port *port)
731{
732 struct uart_sunsu_port *up =
733 container_of(port, struct uart_sunsu_port, port);
734 unsigned long flags;
735
736 /*
737 * Disable interrupts from this port
738 */
739 up->ier = 0;
740 serial_outp(up, UART_IER, 0);
741
742 spin_lock_irqsave(&up->port.lock, flags);
743 if (up->port.flags & UPF_FOURPORT) {
744 /* reset interrupts on the AST Fourport board */
745 inb((up->port.iobase & 0xfe0) | 0x1f);
746 up->port.mctrl |= TIOCM_OUT1;
747 } else
748 up->port.mctrl &= ~TIOCM_OUT2;
749
750 sunsu_set_mctrl(&up->port, up->port.mctrl);
751 spin_unlock_irqrestore(&up->port.lock, flags);
752
753 /*
754 * Disable break condition and FIFOs
755 */
756 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
757 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
758 UART_FCR_CLEAR_RCVR |
759 UART_FCR_CLEAR_XMIT);
760 serial_outp(up, UART_FCR, 0);
761
762#ifdef CONFIG_SERIAL_8250_RSA
763 /*
764 * Reset the RSA board back to 115kbps compat mode.
765 */
766 disable_rsa(up);
767#endif
768
769 /*
770 * Read data port to reset things.
771 */
772 (void) serial_in(up, UART_RX);
773
774 free_irq(up->port.irq, up);
775}
776
777static void
778sunsu_change_speed(struct uart_port *port, unsigned int cflag,
779 unsigned int iflag, unsigned int quot)
780{
781 struct uart_sunsu_port *up =
782 container_of(port, struct uart_sunsu_port, port);
783 unsigned char cval, fcr = 0;
784 unsigned long flags;
785
786 switch (cflag & CSIZE) {
787 case CS5:
788 cval = 0x00;
789 break;
790 case CS6:
791 cval = 0x01;
792 break;
793 case CS7:
794 cval = 0x02;
795 break;
796 default:
797 case CS8:
798 cval = 0x03;
799 break;
800 }
801
802 if (cflag & CSTOPB)
803 cval |= 0x04;
804 if (cflag & PARENB)
805 cval |= UART_LCR_PARITY;
806 if (!(cflag & PARODD))
807 cval |= UART_LCR_EPAR;
808#ifdef CMSPAR
809 if (cflag & CMSPAR)
810 cval |= UART_LCR_SPAR;
811#endif
812
813 /*
814 * Work around a bug in the Oxford Semiconductor 952 rev B
815 * chip which causes it to seriously miscalculate baud rates
816 * when DLL is 0.
817 */
818 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
819 up->rev == 0x5201)
820 quot ++;
821
822 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
823 if ((up->port.uartclk / quot) < (2400 * 16))
824 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
825#ifdef CONFIG_SERIAL_8250_RSA
826 else if (up->port.type == PORT_RSA)
827 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
828#endif
829 else
830 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
831 }
832 if (up->port.type == PORT_16750)
833 fcr |= UART_FCR7_64BYTE;
834
835 /*
836 * Ok, we're now changing the port state. Do it with
837 * interrupts disabled.
838 */
839 spin_lock_irqsave(&up->port.lock, flags);
840
841 /*
842 * Update the per-port timeout.
843 */
844 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
845
846 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
847 if (iflag & INPCK)
848 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
849 if (iflag & (IGNBRK | BRKINT | PARMRK))
850 up->port.read_status_mask |= UART_LSR_BI;
851
852 /*
853 * Characteres to ignore
854 */
855 up->port.ignore_status_mask = 0;
856 if (iflag & IGNPAR)
857 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
858 if (iflag & IGNBRK) {
859 up->port.ignore_status_mask |= UART_LSR_BI;
860 /*
861 * If we're ignoring parity and break indicators,
862 * ignore overruns too (for real raw support).
863 */
864 if (iflag & IGNPAR)
865 up->port.ignore_status_mask |= UART_LSR_OE;
866 }
867
868 /*
869 * ignore all characters if CREAD is not set
870 */
871 if ((cflag & CREAD) == 0)
872 up->port.ignore_status_mask |= UART_LSR_DR;
873
874 /*
875 * CTS flow control flag and modem status interrupts
876 */
877 up->ier &= ~UART_IER_MSI;
878 if (UART_ENABLE_MS(&up->port, cflag))
879 up->ier |= UART_IER_MSI;
880
881 serial_out(up, UART_IER, up->ier);
882
883 if (uart_config[up->port.type].flags & UART_STARTECH) {
884 serial_outp(up, UART_LCR, 0xBF);
885 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
886 }
887 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
888 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
889 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
890 if (up->port.type == PORT_16750)
891 serial_outp(up, UART_FCR, fcr); /* set fcr */
892 serial_outp(up, UART_LCR, cval); /* reset DLAB */
893 up->lcr = cval; /* Save LCR */
894 if (up->port.type != PORT_16750) {
895 if (fcr & UART_FCR_ENABLE_FIFO) {
896 /* emulated UARTs (Lucent Venus 167x) need two steps */
897 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
898 }
899 serial_outp(up, UART_FCR, fcr); /* set fcr */
900 }
901
902 up->cflag = cflag;
903
904 spin_unlock_irqrestore(&up->port.lock, flags);
905}
906
907static void
908sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
909 struct ktermios *old)
910{
911 unsigned int baud, quot;
912
913 /*
914 * Ask the core to calculate the divisor for us.
915 */
916 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
917 quot = uart_get_divisor(port, baud);
918
919 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
920}
921
922static void sunsu_release_port(struct uart_port *port)
923{
924}
925
926static int sunsu_request_port(struct uart_port *port)
927{
928 return 0;
929}
930
931static void sunsu_config_port(struct uart_port *port, int flags)
932{
933 struct uart_sunsu_port *up =
934 container_of(port, struct uart_sunsu_port, port);
935
936 if (flags & UART_CONFIG_TYPE) {
937 /*
938 * We are supposed to call autoconfig here, but this requires
939 * splitting all the OBP probing crap from the UART probing.
940 * We'll do it when we kill sunsu.c altogether.
941 */
942 port->type = up->type_probed; /* XXX */
943 }
944}
945
946static int
947sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
948{
949 return -EINVAL;
950}
951
952static const char *
953sunsu_type(struct uart_port *port)
954{
955 int type = port->type;
956
957 if (type >= ARRAY_SIZE(uart_config))
958 type = 0;
959 return uart_config[type].name;
960}
961
962static const struct uart_ops sunsu_pops = {
963 .tx_empty = sunsu_tx_empty,
964 .set_mctrl = sunsu_set_mctrl,
965 .get_mctrl = sunsu_get_mctrl,
966 .stop_tx = sunsu_stop_tx,
967 .start_tx = sunsu_start_tx,
968 .stop_rx = sunsu_stop_rx,
969 .enable_ms = sunsu_enable_ms,
970 .break_ctl = sunsu_break_ctl,
971 .startup = sunsu_startup,
972 .shutdown = sunsu_shutdown,
973 .set_termios = sunsu_set_termios,
974 .type = sunsu_type,
975 .release_port = sunsu_release_port,
976 .request_port = sunsu_request_port,
977 .config_port = sunsu_config_port,
978 .verify_port = sunsu_verify_port,
979};
980
981#define UART_NR 4
982
983static struct uart_sunsu_port sunsu_ports[UART_NR];
984static int nr_inst; /* Number of already registered ports */
985
986#ifdef CONFIG_SERIO
987
988static DEFINE_SPINLOCK(sunsu_serio_lock);
989
990static int sunsu_serio_write(struct serio *serio, unsigned char ch)
991{
992 struct uart_sunsu_port *up = serio->port_data;
993 unsigned long flags;
994 int lsr;
995
996 spin_lock_irqsave(&sunsu_serio_lock, flags);
997
998 do {
999 lsr = serial_in(up, UART_LSR);
1000 } while (!(lsr & UART_LSR_THRE));
1001
1002 /* Send the character out. */
1003 serial_out(up, UART_TX, ch);
1004
1005 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1006
1007 return 0;
1008}
1009
1010static int sunsu_serio_open(struct serio *serio)
1011{
1012 struct uart_sunsu_port *up = serio->port_data;
1013 unsigned long flags;
1014 int ret;
1015
1016 spin_lock_irqsave(&sunsu_serio_lock, flags);
1017 if (!up->serio_open) {
1018 up->serio_open = 1;
1019 ret = 0;
1020 } else
1021 ret = -EBUSY;
1022 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1023
1024 return ret;
1025}
1026
1027static void sunsu_serio_close(struct serio *serio)
1028{
1029 struct uart_sunsu_port *up = serio->port_data;
1030 unsigned long flags;
1031
1032 spin_lock_irqsave(&sunsu_serio_lock, flags);
1033 up->serio_open = 0;
1034 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1035}
1036
1037#endif /* CONFIG_SERIO */
1038
1039static void sunsu_autoconfig(struct uart_sunsu_port *up)
1040{
1041 unsigned char status1, status2, scratch, scratch2, scratch3;
1042 unsigned char save_lcr, save_mcr;
1043 unsigned long flags;
1044
1045 if (up->su_type == SU_PORT_NONE)
1046 return;
1047
1048 up->type_probed = PORT_UNKNOWN;
1049 up->port.iotype = UPIO_MEM;
1050
1051 spin_lock_irqsave(&up->port.lock, flags);
1052
1053 if (!(up->port.flags & UPF_BUGGY_UART)) {
1054 /*
1055 * Do a simple existence test first; if we fail this, there's
1056 * no point trying anything else.
1057 *
1058 * 0x80 is used as a nonsense port to prevent against false
1059 * positives due to ISA bus float. The assumption is that
1060 * 0x80 is a non-existent port; which should be safe since
1061 * include/asm/io.h also makes this assumption.
1062 */
1063 scratch = serial_inp(up, UART_IER);
1064 serial_outp(up, UART_IER, 0);
1065#ifdef __i386__
1066 outb(0xff, 0x080);
1067#endif
1068 scratch2 = serial_inp(up, UART_IER);
1069 serial_outp(up, UART_IER, 0x0f);
1070#ifdef __i386__
1071 outb(0, 0x080);
1072#endif
1073 scratch3 = serial_inp(up, UART_IER);
1074 serial_outp(up, UART_IER, scratch);
1075 if (scratch2 != 0 || scratch3 != 0x0F)
1076 goto out; /* We failed; there's nothing here */
1077 }
1078
1079 save_mcr = serial_in(up, UART_MCR);
1080 save_lcr = serial_in(up, UART_LCR);
1081
1082 /*
1083 * Check to see if a UART is really there. Certain broken
1084 * internal modems based on the Rockwell chipset fail this
1085 * test, because they apparently don't implement the loopback
1086 * test mode. So this test is skipped on the COM 1 through
1087 * COM 4 ports. This *should* be safe, since no board
1088 * manufacturer would be stupid enough to design a board
1089 * that conflicts with COM 1-4 --- we hope!
1090 */
1091 if (!(up->port.flags & UPF_SKIP_TEST)) {
1092 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1093 status1 = serial_inp(up, UART_MSR) & 0xF0;
1094 serial_outp(up, UART_MCR, save_mcr);
1095 if (status1 != 0x90)
1096 goto out; /* We failed loopback test */
1097 }
1098 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1099 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1100 serial_outp(up, UART_LCR, 0);
1101 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1102 scratch = serial_in(up, UART_IIR) >> 6;
1103 switch (scratch) {
1104 case 0:
1105 up->port.type = PORT_16450;
1106 break;
1107 case 1:
1108 up->port.type = PORT_UNKNOWN;
1109 break;
1110 case 2:
1111 up->port.type = PORT_16550;
1112 break;
1113 case 3:
1114 up->port.type = PORT_16550A;
1115 break;
1116 }
1117 if (up->port.type == PORT_16550A) {
1118 /* Check for Startech UART's */
1119 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1120 if (serial_in(up, UART_EFR) == 0) {
1121 up->port.type = PORT_16650;
1122 } else {
1123 serial_outp(up, UART_LCR, 0xBF);
1124 if (serial_in(up, UART_EFR) == 0)
1125 up->port.type = PORT_16650V2;
1126 }
1127 }
1128 if (up->port.type == PORT_16550A) {
1129 /* Check for TI 16750 */
1130 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1131 serial_outp(up, UART_FCR,
1132 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1133 scratch = serial_in(up, UART_IIR) >> 5;
1134 if (scratch == 7) {
1135 /*
1136 * If this is a 16750, and not a cheap UART
1137 * clone, then it should only go into 64 byte
1138 * mode if the UART_FCR7_64BYTE bit was set
1139 * while UART_LCR_DLAB was latched.
1140 */
1141 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1142 serial_outp(up, UART_LCR, 0);
1143 serial_outp(up, UART_FCR,
1144 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1145 scratch = serial_in(up, UART_IIR) >> 5;
1146 if (scratch == 6)
1147 up->port.type = PORT_16750;
1148 }
1149 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1150 }
1151 serial_outp(up, UART_LCR, save_lcr);
1152 if (up->port.type == PORT_16450) {
1153 scratch = serial_in(up, UART_SCR);
1154 serial_outp(up, UART_SCR, 0xa5);
1155 status1 = serial_in(up, UART_SCR);
1156 serial_outp(up, UART_SCR, 0x5a);
1157 status2 = serial_in(up, UART_SCR);
1158 serial_outp(up, UART_SCR, scratch);
1159
1160 if ((status1 != 0xa5) || (status2 != 0x5a))
1161 up->port.type = PORT_8250;
1162 }
1163
1164 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1165
1166 if (up->port.type == PORT_UNKNOWN)
1167 goto out;
1168 up->type_probed = up->port.type; /* XXX */
1169
1170 /*
1171 * Reset the UART.
1172 */
1173#ifdef CONFIG_SERIAL_8250_RSA
1174 if (up->port.type == PORT_RSA)
1175 serial_outp(up, UART_RSA_FRR, 0);
1176#endif
1177 serial_outp(up, UART_MCR, save_mcr);
1178 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1179 UART_FCR_CLEAR_RCVR |
1180 UART_FCR_CLEAR_XMIT));
1181 serial_outp(up, UART_FCR, 0);
1182 (void)serial_in(up, UART_RX);
1183 serial_outp(up, UART_IER, 0);
1184
1185out:
1186 spin_unlock_irqrestore(&up->port.lock, flags);
1187}
1188
1189static struct uart_driver sunsu_reg = {
1190 .owner = THIS_MODULE,
1191 .driver_name = "sunsu",
1192 .dev_name = "ttyS",
1193 .major = TTY_MAJOR,
1194};
1195
1196static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1197{
1198 int quot, baud;
1199#ifdef CONFIG_SERIO
1200 struct serio *serio;
1201#endif
1202
1203 if (up->su_type == SU_PORT_KBD) {
1204 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1205 baud = 1200;
1206 } else {
1207 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1208 baud = 4800;
1209 }
1210 quot = up->port.uartclk / (16 * baud);
1211
1212 sunsu_autoconfig(up);
1213 if (up->port.type == PORT_UNKNOWN)
1214 return -ENODEV;
1215
1216 printk("%pOF: %s port at %llx, irq %u\n",
1217 up->port.dev->of_node,
1218 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1219 (unsigned long long) up->port.mapbase,
1220 up->port.irq);
1221
1222#ifdef CONFIG_SERIO
1223 serio = &up->serio;
1224 serio->port_data = up;
1225
1226 serio->id.type = SERIO_RS232;
1227 if (up->su_type == SU_PORT_KBD) {
1228 serio->id.proto = SERIO_SUNKBD;
1229 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1230 } else {
1231 serio->id.proto = SERIO_SUN;
1232 serio->id.extra = 1;
1233 strlcpy(serio->name, "sums", sizeof(serio->name));
1234 }
1235 strlcpy(serio->phys,
1236 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1237 sizeof(serio->phys));
1238
1239 serio->write = sunsu_serio_write;
1240 serio->open = sunsu_serio_open;
1241 serio->close = sunsu_serio_close;
1242 serio->dev.parent = up->port.dev;
1243
1244 serio_register_port(serio);
1245#endif
1246
1247 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1248
1249 sunsu_startup(&up->port);
1250 return 0;
1251}
1252
1253/*
1254 * ------------------------------------------------------------
1255 * Serial console driver
1256 * ------------------------------------------------------------
1257 */
1258
1259#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1260
1261#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1262
1263/*
1264 * Wait for transmitter & holding register to empty
1265 */
1266static void wait_for_xmitr(struct uart_sunsu_port *up)
1267{
1268 unsigned int status, tmout = 10000;
1269
1270 /* Wait up to 10ms for the character(s) to be sent. */
1271 do {
1272 status = serial_in(up, UART_LSR);
1273
1274 if (status & UART_LSR_BI)
1275 up->lsr_break_flag = UART_LSR_BI;
1276
1277 if (--tmout == 0)
1278 break;
1279 udelay(1);
1280 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1281
1282 /* Wait up to 1s for flow control if necessary */
1283 if (up->port.flags & UPF_CONS_FLOW) {
1284 tmout = 1000000;
1285 while (--tmout &&
1286 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1287 udelay(1);
1288 }
1289}
1290
1291static void sunsu_console_putchar(struct uart_port *port, int ch)
1292{
1293 struct uart_sunsu_port *up =
1294 container_of(port, struct uart_sunsu_port, port);
1295
1296 wait_for_xmitr(up);
1297 serial_out(up, UART_TX, ch);
1298}
1299
1300/*
1301 * Print a string to the serial port trying not to disturb
1302 * any possible real use of the port...
1303 */
1304static void sunsu_console_write(struct console *co, const char *s,
1305 unsigned int count)
1306{
1307 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1308 unsigned long flags;
1309 unsigned int ier;
1310 int locked = 1;
1311
1312 if (up->port.sysrq || oops_in_progress)
1313 locked = spin_trylock_irqsave(&up->port.lock, flags);
1314 else
1315 spin_lock_irqsave(&up->port.lock, flags);
1316
1317 /*
1318 * First save the UER then disable the interrupts
1319 */
1320 ier = serial_in(up, UART_IER);
1321 serial_out(up, UART_IER, 0);
1322
1323 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1324
1325 /*
1326 * Finally, wait for transmitter to become empty
1327 * and restore the IER
1328 */
1329 wait_for_xmitr(up);
1330 serial_out(up, UART_IER, ier);
1331
1332 if (locked)
1333 spin_unlock_irqrestore(&up->port.lock, flags);
1334}
1335
1336/*
1337 * Setup initial baud/bits/parity. We do two things here:
1338 * - construct a cflag setting for the first su_open()
1339 * - initialize the serial port
1340 * Return non-zero if we didn't find a serial port.
1341 */
1342static int __init sunsu_console_setup(struct console *co, char *options)
1343{
1344 static struct ktermios dummy;
1345 struct ktermios termios;
1346 struct uart_port *port;
1347
1348 printk("Console: ttyS%d (SU)\n",
1349 (sunsu_reg.minor - 64) + co->index);
1350
1351 if (co->index > nr_inst)
1352 return -ENODEV;
1353 port = &sunsu_ports[co->index].port;
1354
1355 /*
1356 * Temporary fix.
1357 */
1358 spin_lock_init(&port->lock);
1359
1360 /* Get firmware console settings. */
1361 sunserial_console_termios(co, port->dev->of_node);
1362
1363 memset(&termios, 0, sizeof(struct ktermios));
1364 termios.c_cflag = co->cflag;
1365 port->mctrl |= TIOCM_DTR;
1366 port->ops->set_termios(port, &termios, &dummy);
1367
1368 return 0;
1369}
1370
1371static struct console sunsu_console = {
1372 .name = "ttyS",
1373 .write = sunsu_console_write,
1374 .device = uart_console_device,
1375 .setup = sunsu_console_setup,
1376 .flags = CON_PRINTBUFFER,
1377 .index = -1,
1378 .data = &sunsu_reg,
1379};
1380
1381/*
1382 * Register console.
1383 */
1384
1385static inline struct console *SUNSU_CONSOLE(void)
1386{
1387 return &sunsu_console;
1388}
1389#else
1390#define SUNSU_CONSOLE() (NULL)
1391#define sunsu_serial_console_init() do { } while (0)
1392#endif
1393
1394static enum su_type su_get_type(struct device_node *dp)
1395{
1396 struct device_node *ap = of_find_node_by_path("/aliases");
1397 enum su_type rc = SU_PORT_PORT;
1398
1399 if (ap) {
1400 const char *keyb = of_get_property(ap, "keyboard", NULL);
1401 const char *ms = of_get_property(ap, "mouse", NULL);
1402 struct device_node *match;
1403
1404 if (keyb) {
1405 match = of_find_node_by_path(keyb);
1406
1407 /*
1408 * The pointer is used as an identifier not
1409 * as a pointer, we can drop the refcount on
1410 * the of__node immediately after getting it.
1411 */
1412 of_node_put(match);
1413
1414 if (dp == match) {
1415 rc = SU_PORT_KBD;
1416 goto out;
1417 }
1418 }
1419 if (ms) {
1420 match = of_find_node_by_path(ms);
1421
1422 of_node_put(match);
1423
1424 if (dp == match) {
1425 rc = SU_PORT_MS;
1426 goto out;
1427 }
1428 }
1429 }
1430
1431out:
1432 of_node_put(ap);
1433 return rc;
1434}
1435
1436static int su_probe(struct platform_device *op)
1437{
1438 struct device_node *dp = op->dev.of_node;
1439 struct uart_sunsu_port *up;
1440 struct resource *rp;
1441 enum su_type type;
1442 bool ignore_line;
1443 int err;
1444
1445 type = su_get_type(dp);
1446 if (type == SU_PORT_PORT) {
1447 if (nr_inst >= UART_NR)
1448 return -EINVAL;
1449 up = &sunsu_ports[nr_inst];
1450 } else {
1451 up = kzalloc(sizeof(*up), GFP_KERNEL);
1452 if (!up)
1453 return -ENOMEM;
1454 }
1455
1456 up->port.line = nr_inst;
1457
1458 spin_lock_init(&up->port.lock);
1459
1460 up->su_type = type;
1461
1462 rp = &op->resource[0];
1463 up->port.mapbase = rp->start;
1464 up->reg_size = resource_size(rp);
1465 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1466 if (!up->port.membase) {
1467 if (type != SU_PORT_PORT)
1468 kfree(up);
1469 return -ENOMEM;
1470 }
1471
1472 up->port.irq = op->archdata.irqs[0];
1473
1474 up->port.dev = &op->dev;
1475
1476 up->port.type = PORT_UNKNOWN;
1477 up->port.uartclk = (SU_BASE_BAUD * 16);
1478
1479 err = 0;
1480 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1481 err = sunsu_kbd_ms_init(up);
1482 if (err) {
1483 of_iounmap(&op->resource[0],
1484 up->port.membase, up->reg_size);
1485 kfree(up);
1486 return err;
1487 }
1488 platform_set_drvdata(op, up);
1489
1490 nr_inst++;
1491
1492 return 0;
1493 }
1494
1495 up->port.flags |= UPF_BOOT_AUTOCONF;
1496
1497 sunsu_autoconfig(up);
1498
1499 err = -ENODEV;
1500 if (up->port.type == PORT_UNKNOWN)
1501 goto out_unmap;
1502
1503 up->port.ops = &sunsu_pops;
1504
1505 ignore_line = false;
1506 if (of_node_name_eq(dp, "rsc-console") ||
1507 of_node_name_eq(dp, "lom-console"))
1508 ignore_line = true;
1509
1510 sunserial_console_match(SUNSU_CONSOLE(), dp,
1511 &sunsu_reg, up->port.line,
1512 ignore_line);
1513 err = uart_add_one_port(&sunsu_reg, &up->port);
1514 if (err)
1515 goto out_unmap;
1516
1517 platform_set_drvdata(op, up);
1518
1519 nr_inst++;
1520
1521 return 0;
1522
1523out_unmap:
1524 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1525 kfree(up);
1526 return err;
1527}
1528
1529static int su_remove(struct platform_device *op)
1530{
1531 struct uart_sunsu_port *up = platform_get_drvdata(op);
1532 bool kbdms = false;
1533
1534 if (up->su_type == SU_PORT_MS ||
1535 up->su_type == SU_PORT_KBD)
1536 kbdms = true;
1537
1538 if (kbdms) {
1539#ifdef CONFIG_SERIO
1540 serio_unregister_port(&up->serio);
1541#endif
1542 } else if (up->port.type != PORT_UNKNOWN)
1543 uart_remove_one_port(&sunsu_reg, &up->port);
1544
1545 if (up->port.membase)
1546 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1547
1548 if (kbdms)
1549 kfree(up);
1550
1551 return 0;
1552}
1553
1554static const struct of_device_id su_match[] = {
1555 {
1556 .name = "su",
1557 },
1558 {
1559 .name = "su_pnp",
1560 },
1561 {
1562 .name = "serial",
1563 .compatible = "su",
1564 },
1565 {
1566 .type = "serial",
1567 .compatible = "su",
1568 },
1569 {},
1570};
1571MODULE_DEVICE_TABLE(of, su_match);
1572
1573static struct platform_driver su_driver = {
1574 .driver = {
1575 .name = "su",
1576 .of_match_table = su_match,
1577 },
1578 .probe = su_probe,
1579 .remove = su_remove,
1580};
1581
1582static int __init sunsu_init(void)
1583{
1584 struct device_node *dp;
1585 int err;
1586 int num_uart = 0;
1587
1588 for_each_node_by_name(dp, "su") {
1589 if (su_get_type(dp) == SU_PORT_PORT)
1590 num_uart++;
1591 }
1592 for_each_node_by_name(dp, "su_pnp") {
1593 if (su_get_type(dp) == SU_PORT_PORT)
1594 num_uart++;
1595 }
1596 for_each_node_by_name(dp, "serial") {
1597 if (of_device_is_compatible(dp, "su")) {
1598 if (su_get_type(dp) == SU_PORT_PORT)
1599 num_uart++;
1600 }
1601 }
1602 for_each_node_by_type(dp, "serial") {
1603 if (of_device_is_compatible(dp, "su")) {
1604 if (su_get_type(dp) == SU_PORT_PORT)
1605 num_uart++;
1606 }
1607 }
1608
1609 if (num_uart) {
1610 err = sunserial_register_minors(&sunsu_reg, num_uart);
1611 if (err)
1612 return err;
1613 }
1614
1615 err = platform_driver_register(&su_driver);
1616 if (err && num_uart)
1617 sunserial_unregister_minors(&sunsu_reg, num_uart);
1618
1619 return err;
1620}
1621
1622static void __exit sunsu_exit(void)
1623{
1624 platform_driver_unregister(&su_driver);
1625 if (sunsu_reg.nr)
1626 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1627}
1628
1629module_init(sunsu_init);
1630module_exit(sunsu_exit);
1631
1632MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1633MODULE_DESCRIPTION("Sun SU serial port driver");
1634MODULE_VERSION("2.0");
1635MODULE_LICENSE("GPL");
1/*
2 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
3 *
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
6 *
7 * This is mainly a variation of 8250.c, credits go to authors mentioned
8 * therein. In fact this driver should be merged into the generic 8250.c
9 * infrastructure perhaps using a 8250_sparc.c module.
10 *
11 * Fixed to use tty_get_baud_rate().
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13 *
14 * Converted to new 2.5.x UART layer.
15 * David S. Miller (davem@davemloft.net), 2002-Jul-29
16 */
17
18#include <linux/module.h>
19#include <linux/kernel.h>
20#include <linux/spinlock.h>
21#include <linux/errno.h>
22#include <linux/tty.h>
23#include <linux/tty_flip.h>
24#include <linux/major.h>
25#include <linux/string.h>
26#include <linux/ptrace.h>
27#include <linux/ioport.h>
28#include <linux/circ_buf.h>
29#include <linux/serial.h>
30#include <linux/sysrq.h>
31#include <linux/console.h>
32#include <linux/slab.h>
33#ifdef CONFIG_SERIO
34#include <linux/serio.h>
35#endif
36#include <linux/serial_reg.h>
37#include <linux/init.h>
38#include <linux/delay.h>
39#include <linux/of_device.h>
40
41#include <asm/io.h>
42#include <asm/irq.h>
43#include <asm/prom.h>
44#include <asm/setup.h>
45
46#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
47#define SUPPORT_SYSRQ
48#endif
49
50#include <linux/serial_core.h>
51#include <linux/sunserialcore.h>
52
53/* We are on a NS PC87303 clocked with 24.0 MHz, which results
54 * in a UART clock of 1.8462 MHz.
55 */
56#define SU_BASE_BAUD (1846200 / 16)
57
58enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
59static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
60
61struct serial_uart_config {
62 char *name;
63 int dfl_xmit_fifo_size;
64 int flags;
65};
66
67/*
68 * Here we define the default xmit fifo size used for each type of UART.
69 */
70static const struct serial_uart_config uart_config[] = {
71 { "unknown", 1, 0 },
72 { "8250", 1, 0 },
73 { "16450", 1, 0 },
74 { "16550", 1, 0 },
75 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
76 { "Cirrus", 1, 0 },
77 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
78 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
79 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
80 { "Startech", 1, 0 },
81 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
82 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
83 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
84 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
85};
86
87struct uart_sunsu_port {
88 struct uart_port port;
89 unsigned char acr;
90 unsigned char ier;
91 unsigned short rev;
92 unsigned char lcr;
93 unsigned int lsr_break_flag;
94 unsigned int cflag;
95
96 /* Probing information. */
97 enum su_type su_type;
98 unsigned int type_probed; /* XXX Stupid */
99 unsigned long reg_size;
100
101#ifdef CONFIG_SERIO
102 struct serio serio;
103 int serio_open;
104#endif
105};
106
107static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
108{
109 offset <<= up->port.regshift;
110
111 switch (up->port.iotype) {
112 case UPIO_HUB6:
113 outb(up->port.hub6 - 1 + offset, up->port.iobase);
114 return inb(up->port.iobase + 1);
115
116 case UPIO_MEM:
117 return readb(up->port.membase + offset);
118
119 default:
120 return inb(up->port.iobase + offset);
121 }
122}
123
124static void serial_out(struct uart_sunsu_port *up, int offset, int value)
125{
126#ifndef CONFIG_SPARC64
127 /*
128 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
129 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
130 * gate outputs a logical one. Since we use level triggered interrupts
131 * we have lockup and watchdog reset. We cannot mask IRQ because
132 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
133 * This problem is similar to what Alpha people suffer, see serial.c.
134 */
135 if (offset == UART_MCR)
136 value |= UART_MCR_OUT2;
137#endif
138 offset <<= up->port.regshift;
139
140 switch (up->port.iotype) {
141 case UPIO_HUB6:
142 outb(up->port.hub6 - 1 + offset, up->port.iobase);
143 outb(value, up->port.iobase + 1);
144 break;
145
146 case UPIO_MEM:
147 writeb(value, up->port.membase + offset);
148 break;
149
150 default:
151 outb(value, up->port.iobase + offset);
152 }
153}
154
155/*
156 * We used to support using pause I/O for certain machines. We
157 * haven't supported this for a while, but just in case it's badly
158 * needed for certain old 386 machines, I've left these #define's
159 * in....
160 */
161#define serial_inp(up, offset) serial_in(up, offset)
162#define serial_outp(up, offset, value) serial_out(up, offset, value)
163
164
165/*
166 * For the 16C950
167 */
168static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
169{
170 serial_out(up, UART_SCR, offset);
171 serial_out(up, UART_ICR, value);
172}
173
174#if 0 /* Unused currently */
175static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
176{
177 unsigned int value;
178
179 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
180 serial_out(up, UART_SCR, offset);
181 value = serial_in(up, UART_ICR);
182 serial_icr_write(up, UART_ACR, up->acr);
183
184 return value;
185}
186#endif
187
188#ifdef CONFIG_SERIAL_8250_RSA
189/*
190 * Attempts to turn on the RSA FIFO. Returns zero on failure.
191 * We set the port uart clock rate if we succeed.
192 */
193static int __enable_rsa(struct uart_sunsu_port *up)
194{
195 unsigned char mode;
196 int result;
197
198 mode = serial_inp(up, UART_RSA_MSR);
199 result = mode & UART_RSA_MSR_FIFO;
200
201 if (!result) {
202 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
203 mode = serial_inp(up, UART_RSA_MSR);
204 result = mode & UART_RSA_MSR_FIFO;
205 }
206
207 if (result)
208 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
209
210 return result;
211}
212
213static void enable_rsa(struct uart_sunsu_port *up)
214{
215 if (up->port.type == PORT_RSA) {
216 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
217 spin_lock_irq(&up->port.lock);
218 __enable_rsa(up);
219 spin_unlock_irq(&up->port.lock);
220 }
221 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
222 serial_outp(up, UART_RSA_FRR, 0);
223 }
224}
225
226/*
227 * Attempts to turn off the RSA FIFO. Returns zero on failure.
228 * It is unknown why interrupts were disabled in here. However,
229 * the caller is expected to preserve this behaviour by grabbing
230 * the spinlock before calling this function.
231 */
232static void disable_rsa(struct uart_sunsu_port *up)
233{
234 unsigned char mode;
235 int result;
236
237 if (up->port.type == PORT_RSA &&
238 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
239 spin_lock_irq(&up->port.lock);
240
241 mode = serial_inp(up, UART_RSA_MSR);
242 result = !(mode & UART_RSA_MSR_FIFO);
243
244 if (!result) {
245 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
246 mode = serial_inp(up, UART_RSA_MSR);
247 result = !(mode & UART_RSA_MSR_FIFO);
248 }
249
250 if (result)
251 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
252 spin_unlock_irq(&up->port.lock);
253 }
254}
255#endif /* CONFIG_SERIAL_8250_RSA */
256
257static inline void __stop_tx(struct uart_sunsu_port *p)
258{
259 if (p->ier & UART_IER_THRI) {
260 p->ier &= ~UART_IER_THRI;
261 serial_out(p, UART_IER, p->ier);
262 }
263}
264
265static void sunsu_stop_tx(struct uart_port *port)
266{
267 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
268
269 __stop_tx(up);
270
271 /*
272 * We really want to stop the transmitter from sending.
273 */
274 if (up->port.type == PORT_16C950) {
275 up->acr |= UART_ACR_TXDIS;
276 serial_icr_write(up, UART_ACR, up->acr);
277 }
278}
279
280static void sunsu_start_tx(struct uart_port *port)
281{
282 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
283
284 if (!(up->ier & UART_IER_THRI)) {
285 up->ier |= UART_IER_THRI;
286 serial_out(up, UART_IER, up->ier);
287 }
288
289 /*
290 * Re-enable the transmitter if we disabled it.
291 */
292 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
293 up->acr &= ~UART_ACR_TXDIS;
294 serial_icr_write(up, UART_ACR, up->acr);
295 }
296}
297
298static void sunsu_stop_rx(struct uart_port *port)
299{
300 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
301
302 up->ier &= ~UART_IER_RLSI;
303 up->port.read_status_mask &= ~UART_LSR_DR;
304 serial_out(up, UART_IER, up->ier);
305}
306
307static void sunsu_enable_ms(struct uart_port *port)
308{
309 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
310 unsigned long flags;
311
312 spin_lock_irqsave(&up->port.lock, flags);
313 up->ier |= UART_IER_MSI;
314 serial_out(up, UART_IER, up->ier);
315 spin_unlock_irqrestore(&up->port.lock, flags);
316}
317
318static void
319receive_chars(struct uart_sunsu_port *up, unsigned char *status)
320{
321 struct tty_port *port = &up->port.state->port;
322 unsigned char ch, flag;
323 int max_count = 256;
324 int saw_console_brk = 0;
325
326 do {
327 ch = serial_inp(up, UART_RX);
328 flag = TTY_NORMAL;
329 up->port.icount.rx++;
330
331 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
332 UART_LSR_FE | UART_LSR_OE))) {
333 /*
334 * For statistics only
335 */
336 if (*status & UART_LSR_BI) {
337 *status &= ~(UART_LSR_FE | UART_LSR_PE);
338 up->port.icount.brk++;
339 if (up->port.cons != NULL &&
340 up->port.line == up->port.cons->index)
341 saw_console_brk = 1;
342 /*
343 * We do the SysRQ and SAK checking
344 * here because otherwise the break
345 * may get masked by ignore_status_mask
346 * or read_status_mask.
347 */
348 if (uart_handle_break(&up->port))
349 goto ignore_char;
350 } else if (*status & UART_LSR_PE)
351 up->port.icount.parity++;
352 else if (*status & UART_LSR_FE)
353 up->port.icount.frame++;
354 if (*status & UART_LSR_OE)
355 up->port.icount.overrun++;
356
357 /*
358 * Mask off conditions which should be ingored.
359 */
360 *status &= up->port.read_status_mask;
361
362 if (up->port.cons != NULL &&
363 up->port.line == up->port.cons->index) {
364 /* Recover the break flag from console xmit */
365 *status |= up->lsr_break_flag;
366 up->lsr_break_flag = 0;
367 }
368
369 if (*status & UART_LSR_BI) {
370 flag = TTY_BREAK;
371 } else if (*status & UART_LSR_PE)
372 flag = TTY_PARITY;
373 else if (*status & UART_LSR_FE)
374 flag = TTY_FRAME;
375 }
376 if (uart_handle_sysrq_char(&up->port, ch))
377 goto ignore_char;
378 if ((*status & up->port.ignore_status_mask) == 0)
379 tty_insert_flip_char(port, ch, flag);
380 if (*status & UART_LSR_OE)
381 /*
382 * Overrun is special, since it's reported
383 * immediately, and doesn't affect the current
384 * character.
385 */
386 tty_insert_flip_char(port, 0, TTY_OVERRUN);
387 ignore_char:
388 *status = serial_inp(up, UART_LSR);
389 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
390
391 if (saw_console_brk)
392 sun_do_break();
393}
394
395static void transmit_chars(struct uart_sunsu_port *up)
396{
397 struct circ_buf *xmit = &up->port.state->xmit;
398 int count;
399
400 if (up->port.x_char) {
401 serial_outp(up, UART_TX, up->port.x_char);
402 up->port.icount.tx++;
403 up->port.x_char = 0;
404 return;
405 }
406 if (uart_tx_stopped(&up->port)) {
407 sunsu_stop_tx(&up->port);
408 return;
409 }
410 if (uart_circ_empty(xmit)) {
411 __stop_tx(up);
412 return;
413 }
414
415 count = up->port.fifosize;
416 do {
417 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
418 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
419 up->port.icount.tx++;
420 if (uart_circ_empty(xmit))
421 break;
422 } while (--count > 0);
423
424 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
425 uart_write_wakeup(&up->port);
426
427 if (uart_circ_empty(xmit))
428 __stop_tx(up);
429}
430
431static void check_modem_status(struct uart_sunsu_port *up)
432{
433 int status;
434
435 status = serial_in(up, UART_MSR);
436
437 if ((status & UART_MSR_ANY_DELTA) == 0)
438 return;
439
440 if (status & UART_MSR_TERI)
441 up->port.icount.rng++;
442 if (status & UART_MSR_DDSR)
443 up->port.icount.dsr++;
444 if (status & UART_MSR_DDCD)
445 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
446 if (status & UART_MSR_DCTS)
447 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
448
449 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
450}
451
452static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
453{
454 struct uart_sunsu_port *up = dev_id;
455 unsigned long flags;
456 unsigned char status;
457
458 spin_lock_irqsave(&up->port.lock, flags);
459
460 do {
461 status = serial_inp(up, UART_LSR);
462 if (status & UART_LSR_DR)
463 receive_chars(up, &status);
464 check_modem_status(up);
465 if (status & UART_LSR_THRE)
466 transmit_chars(up);
467
468 spin_unlock_irqrestore(&up->port.lock, flags);
469
470 tty_flip_buffer_push(&up->port.state->port);
471
472 spin_lock_irqsave(&up->port.lock, flags);
473
474 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
475
476 spin_unlock_irqrestore(&up->port.lock, flags);
477
478 return IRQ_HANDLED;
479}
480
481/* Separate interrupt handling path for keyboard/mouse ports. */
482
483static void
484sunsu_change_speed(struct uart_port *port, unsigned int cflag,
485 unsigned int iflag, unsigned int quot);
486
487static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
488{
489 unsigned int cur_cflag = up->cflag;
490 int quot, new_baud;
491
492 up->cflag &= ~CBAUD;
493 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
494
495 quot = up->port.uartclk / (16 * new_baud);
496
497 sunsu_change_speed(&up->port, up->cflag, 0, quot);
498}
499
500static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
501{
502 do {
503 unsigned char ch = serial_inp(up, UART_RX);
504
505 /* Stop-A is handled by drivers/char/keyboard.c now. */
506 if (up->su_type == SU_PORT_KBD) {
507#ifdef CONFIG_SERIO
508 serio_interrupt(&up->serio, ch, 0);
509#endif
510 } else if (up->su_type == SU_PORT_MS) {
511 int ret = suncore_mouse_baud_detection(ch, is_break);
512
513 switch (ret) {
514 case 2:
515 sunsu_change_mouse_baud(up);
516 /* fallthru */
517 case 1:
518 break;
519
520 case 0:
521#ifdef CONFIG_SERIO
522 serio_interrupt(&up->serio, ch, 0);
523#endif
524 break;
525 }
526 }
527 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
528}
529
530static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
531{
532 struct uart_sunsu_port *up = dev_id;
533
534 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
535 unsigned char status = serial_inp(up, UART_LSR);
536
537 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
538 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
539 }
540
541 return IRQ_HANDLED;
542}
543
544static unsigned int sunsu_tx_empty(struct uart_port *port)
545{
546 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
547 unsigned long flags;
548 unsigned int ret;
549
550 spin_lock_irqsave(&up->port.lock, flags);
551 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
552 spin_unlock_irqrestore(&up->port.lock, flags);
553
554 return ret;
555}
556
557static unsigned int sunsu_get_mctrl(struct uart_port *port)
558{
559 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
560 unsigned char status;
561 unsigned int ret;
562
563 status = serial_in(up, UART_MSR);
564
565 ret = 0;
566 if (status & UART_MSR_DCD)
567 ret |= TIOCM_CAR;
568 if (status & UART_MSR_RI)
569 ret |= TIOCM_RNG;
570 if (status & UART_MSR_DSR)
571 ret |= TIOCM_DSR;
572 if (status & UART_MSR_CTS)
573 ret |= TIOCM_CTS;
574 return ret;
575}
576
577static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
578{
579 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
580 unsigned char mcr = 0;
581
582 if (mctrl & TIOCM_RTS)
583 mcr |= UART_MCR_RTS;
584 if (mctrl & TIOCM_DTR)
585 mcr |= UART_MCR_DTR;
586 if (mctrl & TIOCM_OUT1)
587 mcr |= UART_MCR_OUT1;
588 if (mctrl & TIOCM_OUT2)
589 mcr |= UART_MCR_OUT2;
590 if (mctrl & TIOCM_LOOP)
591 mcr |= UART_MCR_LOOP;
592
593 serial_out(up, UART_MCR, mcr);
594}
595
596static void sunsu_break_ctl(struct uart_port *port, int break_state)
597{
598 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
599 unsigned long flags;
600
601 spin_lock_irqsave(&up->port.lock, flags);
602 if (break_state == -1)
603 up->lcr |= UART_LCR_SBC;
604 else
605 up->lcr &= ~UART_LCR_SBC;
606 serial_out(up, UART_LCR, up->lcr);
607 spin_unlock_irqrestore(&up->port.lock, flags);
608}
609
610static int sunsu_startup(struct uart_port *port)
611{
612 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
613 unsigned long flags;
614 int retval;
615
616 if (up->port.type == PORT_16C950) {
617 /* Wake up and initialize UART */
618 up->acr = 0;
619 serial_outp(up, UART_LCR, 0xBF);
620 serial_outp(up, UART_EFR, UART_EFR_ECB);
621 serial_outp(up, UART_IER, 0);
622 serial_outp(up, UART_LCR, 0);
623 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
624 serial_outp(up, UART_LCR, 0xBF);
625 serial_outp(up, UART_EFR, UART_EFR_ECB);
626 serial_outp(up, UART_LCR, 0);
627 }
628
629#ifdef CONFIG_SERIAL_8250_RSA
630 /*
631 * If this is an RSA port, see if we can kick it up to the
632 * higher speed clock.
633 */
634 enable_rsa(up);
635#endif
636
637 /*
638 * Clear the FIFO buffers and disable them.
639 * (they will be reenabled in set_termios())
640 */
641 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
642 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
643 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
644 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
645 serial_outp(up, UART_FCR, 0);
646 }
647
648 /*
649 * Clear the interrupt registers.
650 */
651 (void) serial_inp(up, UART_LSR);
652 (void) serial_inp(up, UART_RX);
653 (void) serial_inp(up, UART_IIR);
654 (void) serial_inp(up, UART_MSR);
655
656 /*
657 * At this point, there's no way the LSR could still be 0xff;
658 * if it is, then bail out, because there's likely no UART
659 * here.
660 */
661 if (!(up->port.flags & UPF_BUGGY_UART) &&
662 (serial_inp(up, UART_LSR) == 0xff)) {
663 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
664 return -ENODEV;
665 }
666
667 if (up->su_type != SU_PORT_PORT) {
668 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
669 IRQF_SHARED, su_typev[up->su_type], up);
670 } else {
671 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
672 IRQF_SHARED, su_typev[up->su_type], up);
673 }
674 if (retval) {
675 printk("su: Cannot register IRQ %d\n", up->port.irq);
676 return retval;
677 }
678
679 /*
680 * Now, initialize the UART
681 */
682 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
683
684 spin_lock_irqsave(&up->port.lock, flags);
685
686 up->port.mctrl |= TIOCM_OUT2;
687
688 sunsu_set_mctrl(&up->port, up->port.mctrl);
689 spin_unlock_irqrestore(&up->port.lock, flags);
690
691 /*
692 * Finally, enable interrupts. Note: Modem status interrupts
693 * are set via set_termios(), which will be occurring imminently
694 * anyway, so we don't enable them here.
695 */
696 up->ier = UART_IER_RLSI | UART_IER_RDI;
697 serial_outp(up, UART_IER, up->ier);
698
699 if (up->port.flags & UPF_FOURPORT) {
700 unsigned int icp;
701 /*
702 * Enable interrupts on the AST Fourport board
703 */
704 icp = (up->port.iobase & 0xfe0) | 0x01f;
705 outb_p(0x80, icp);
706 (void) inb_p(icp);
707 }
708
709 /*
710 * And clear the interrupt registers again for luck.
711 */
712 (void) serial_inp(up, UART_LSR);
713 (void) serial_inp(up, UART_RX);
714 (void) serial_inp(up, UART_IIR);
715 (void) serial_inp(up, UART_MSR);
716
717 return 0;
718}
719
720static void sunsu_shutdown(struct uart_port *port)
721{
722 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
723 unsigned long flags;
724
725 /*
726 * Disable interrupts from this port
727 */
728 up->ier = 0;
729 serial_outp(up, UART_IER, 0);
730
731 spin_lock_irqsave(&up->port.lock, flags);
732 if (up->port.flags & UPF_FOURPORT) {
733 /* reset interrupts on the AST Fourport board */
734 inb((up->port.iobase & 0xfe0) | 0x1f);
735 up->port.mctrl |= TIOCM_OUT1;
736 } else
737 up->port.mctrl &= ~TIOCM_OUT2;
738
739 sunsu_set_mctrl(&up->port, up->port.mctrl);
740 spin_unlock_irqrestore(&up->port.lock, flags);
741
742 /*
743 * Disable break condition and FIFOs
744 */
745 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
746 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
747 UART_FCR_CLEAR_RCVR |
748 UART_FCR_CLEAR_XMIT);
749 serial_outp(up, UART_FCR, 0);
750
751#ifdef CONFIG_SERIAL_8250_RSA
752 /*
753 * Reset the RSA board back to 115kbps compat mode.
754 */
755 disable_rsa(up);
756#endif
757
758 /*
759 * Read data port to reset things.
760 */
761 (void) serial_in(up, UART_RX);
762
763 free_irq(up->port.irq, up);
764}
765
766static void
767sunsu_change_speed(struct uart_port *port, unsigned int cflag,
768 unsigned int iflag, unsigned int quot)
769{
770 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
771 unsigned char cval, fcr = 0;
772 unsigned long flags;
773
774 switch (cflag & CSIZE) {
775 case CS5:
776 cval = 0x00;
777 break;
778 case CS6:
779 cval = 0x01;
780 break;
781 case CS7:
782 cval = 0x02;
783 break;
784 default:
785 case CS8:
786 cval = 0x03;
787 break;
788 }
789
790 if (cflag & CSTOPB)
791 cval |= 0x04;
792 if (cflag & PARENB)
793 cval |= UART_LCR_PARITY;
794 if (!(cflag & PARODD))
795 cval |= UART_LCR_EPAR;
796#ifdef CMSPAR
797 if (cflag & CMSPAR)
798 cval |= UART_LCR_SPAR;
799#endif
800
801 /*
802 * Work around a bug in the Oxford Semiconductor 952 rev B
803 * chip which causes it to seriously miscalculate baud rates
804 * when DLL is 0.
805 */
806 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
807 up->rev == 0x5201)
808 quot ++;
809
810 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
811 if ((up->port.uartclk / quot) < (2400 * 16))
812 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
813#ifdef CONFIG_SERIAL_8250_RSA
814 else if (up->port.type == PORT_RSA)
815 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
816#endif
817 else
818 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
819 }
820 if (up->port.type == PORT_16750)
821 fcr |= UART_FCR7_64BYTE;
822
823 /*
824 * Ok, we're now changing the port state. Do it with
825 * interrupts disabled.
826 */
827 spin_lock_irqsave(&up->port.lock, flags);
828
829 /*
830 * Update the per-port timeout.
831 */
832 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
833
834 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
835 if (iflag & INPCK)
836 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
837 if (iflag & (BRKINT | PARMRK))
838 up->port.read_status_mask |= UART_LSR_BI;
839
840 /*
841 * Characteres to ignore
842 */
843 up->port.ignore_status_mask = 0;
844 if (iflag & IGNPAR)
845 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
846 if (iflag & IGNBRK) {
847 up->port.ignore_status_mask |= UART_LSR_BI;
848 /*
849 * If we're ignoring parity and break indicators,
850 * ignore overruns too (for real raw support).
851 */
852 if (iflag & IGNPAR)
853 up->port.ignore_status_mask |= UART_LSR_OE;
854 }
855
856 /*
857 * ignore all characters if CREAD is not set
858 */
859 if ((cflag & CREAD) == 0)
860 up->port.ignore_status_mask |= UART_LSR_DR;
861
862 /*
863 * CTS flow control flag and modem status interrupts
864 */
865 up->ier &= ~UART_IER_MSI;
866 if (UART_ENABLE_MS(&up->port, cflag))
867 up->ier |= UART_IER_MSI;
868
869 serial_out(up, UART_IER, up->ier);
870
871 if (uart_config[up->port.type].flags & UART_STARTECH) {
872 serial_outp(up, UART_LCR, 0xBF);
873 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
874 }
875 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
876 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
877 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
878 if (up->port.type == PORT_16750)
879 serial_outp(up, UART_FCR, fcr); /* set fcr */
880 serial_outp(up, UART_LCR, cval); /* reset DLAB */
881 up->lcr = cval; /* Save LCR */
882 if (up->port.type != PORT_16750) {
883 if (fcr & UART_FCR_ENABLE_FIFO) {
884 /* emulated UARTs (Lucent Venus 167x) need two steps */
885 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
886 }
887 serial_outp(up, UART_FCR, fcr); /* set fcr */
888 }
889
890 up->cflag = cflag;
891
892 spin_unlock_irqrestore(&up->port.lock, flags);
893}
894
895static void
896sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
897 struct ktermios *old)
898{
899 unsigned int baud, quot;
900
901 /*
902 * Ask the core to calculate the divisor for us.
903 */
904 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
905 quot = uart_get_divisor(port, baud);
906
907 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
908}
909
910static void sunsu_release_port(struct uart_port *port)
911{
912}
913
914static int sunsu_request_port(struct uart_port *port)
915{
916 return 0;
917}
918
919static void sunsu_config_port(struct uart_port *port, int flags)
920{
921 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
922
923 if (flags & UART_CONFIG_TYPE) {
924 /*
925 * We are supposed to call autoconfig here, but this requires
926 * splitting all the OBP probing crap from the UART probing.
927 * We'll do it when we kill sunsu.c altogether.
928 */
929 port->type = up->type_probed; /* XXX */
930 }
931}
932
933static int
934sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
935{
936 return -EINVAL;
937}
938
939static const char *
940sunsu_type(struct uart_port *port)
941{
942 int type = port->type;
943
944 if (type >= ARRAY_SIZE(uart_config))
945 type = 0;
946 return uart_config[type].name;
947}
948
949static struct uart_ops sunsu_pops = {
950 .tx_empty = sunsu_tx_empty,
951 .set_mctrl = sunsu_set_mctrl,
952 .get_mctrl = sunsu_get_mctrl,
953 .stop_tx = sunsu_stop_tx,
954 .start_tx = sunsu_start_tx,
955 .stop_rx = sunsu_stop_rx,
956 .enable_ms = sunsu_enable_ms,
957 .break_ctl = sunsu_break_ctl,
958 .startup = sunsu_startup,
959 .shutdown = sunsu_shutdown,
960 .set_termios = sunsu_set_termios,
961 .type = sunsu_type,
962 .release_port = sunsu_release_port,
963 .request_port = sunsu_request_port,
964 .config_port = sunsu_config_port,
965 .verify_port = sunsu_verify_port,
966};
967
968#define UART_NR 4
969
970static struct uart_sunsu_port sunsu_ports[UART_NR];
971static int nr_inst; /* Number of already registered ports */
972
973#ifdef CONFIG_SERIO
974
975static DEFINE_SPINLOCK(sunsu_serio_lock);
976
977static int sunsu_serio_write(struct serio *serio, unsigned char ch)
978{
979 struct uart_sunsu_port *up = serio->port_data;
980 unsigned long flags;
981 int lsr;
982
983 spin_lock_irqsave(&sunsu_serio_lock, flags);
984
985 do {
986 lsr = serial_in(up, UART_LSR);
987 } while (!(lsr & UART_LSR_THRE));
988
989 /* Send the character out. */
990 serial_out(up, UART_TX, ch);
991
992 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
993
994 return 0;
995}
996
997static int sunsu_serio_open(struct serio *serio)
998{
999 struct uart_sunsu_port *up = serio->port_data;
1000 unsigned long flags;
1001 int ret;
1002
1003 spin_lock_irqsave(&sunsu_serio_lock, flags);
1004 if (!up->serio_open) {
1005 up->serio_open = 1;
1006 ret = 0;
1007 } else
1008 ret = -EBUSY;
1009 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1010
1011 return ret;
1012}
1013
1014static void sunsu_serio_close(struct serio *serio)
1015{
1016 struct uart_sunsu_port *up = serio->port_data;
1017 unsigned long flags;
1018
1019 spin_lock_irqsave(&sunsu_serio_lock, flags);
1020 up->serio_open = 0;
1021 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1022}
1023
1024#endif /* CONFIG_SERIO */
1025
1026static void sunsu_autoconfig(struct uart_sunsu_port *up)
1027{
1028 unsigned char status1, status2, scratch, scratch2, scratch3;
1029 unsigned char save_lcr, save_mcr;
1030 unsigned long flags;
1031
1032 if (up->su_type == SU_PORT_NONE)
1033 return;
1034
1035 up->type_probed = PORT_UNKNOWN;
1036 up->port.iotype = UPIO_MEM;
1037
1038 spin_lock_irqsave(&up->port.lock, flags);
1039
1040 if (!(up->port.flags & UPF_BUGGY_UART)) {
1041 /*
1042 * Do a simple existence test first; if we fail this, there's
1043 * no point trying anything else.
1044 *
1045 * 0x80 is used as a nonsense port to prevent against false
1046 * positives due to ISA bus float. The assumption is that
1047 * 0x80 is a non-existent port; which should be safe since
1048 * include/asm/io.h also makes this assumption.
1049 */
1050 scratch = serial_inp(up, UART_IER);
1051 serial_outp(up, UART_IER, 0);
1052#ifdef __i386__
1053 outb(0xff, 0x080);
1054#endif
1055 scratch2 = serial_inp(up, UART_IER);
1056 serial_outp(up, UART_IER, 0x0f);
1057#ifdef __i386__
1058 outb(0, 0x080);
1059#endif
1060 scratch3 = serial_inp(up, UART_IER);
1061 serial_outp(up, UART_IER, scratch);
1062 if (scratch2 != 0 || scratch3 != 0x0F)
1063 goto out; /* We failed; there's nothing here */
1064 }
1065
1066 save_mcr = serial_in(up, UART_MCR);
1067 save_lcr = serial_in(up, UART_LCR);
1068
1069 /*
1070 * Check to see if a UART is really there. Certain broken
1071 * internal modems based on the Rockwell chipset fail this
1072 * test, because they apparently don't implement the loopback
1073 * test mode. So this test is skipped on the COM 1 through
1074 * COM 4 ports. This *should* be safe, since no board
1075 * manufacturer would be stupid enough to design a board
1076 * that conflicts with COM 1-4 --- we hope!
1077 */
1078 if (!(up->port.flags & UPF_SKIP_TEST)) {
1079 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1080 status1 = serial_inp(up, UART_MSR) & 0xF0;
1081 serial_outp(up, UART_MCR, save_mcr);
1082 if (status1 != 0x90)
1083 goto out; /* We failed loopback test */
1084 }
1085 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1086 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1087 serial_outp(up, UART_LCR, 0);
1088 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1089 scratch = serial_in(up, UART_IIR) >> 6;
1090 switch (scratch) {
1091 case 0:
1092 up->port.type = PORT_16450;
1093 break;
1094 case 1:
1095 up->port.type = PORT_UNKNOWN;
1096 break;
1097 case 2:
1098 up->port.type = PORT_16550;
1099 break;
1100 case 3:
1101 up->port.type = PORT_16550A;
1102 break;
1103 }
1104 if (up->port.type == PORT_16550A) {
1105 /* Check for Startech UART's */
1106 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1107 if (serial_in(up, UART_EFR) == 0) {
1108 up->port.type = PORT_16650;
1109 } else {
1110 serial_outp(up, UART_LCR, 0xBF);
1111 if (serial_in(up, UART_EFR) == 0)
1112 up->port.type = PORT_16650V2;
1113 }
1114 }
1115 if (up->port.type == PORT_16550A) {
1116 /* Check for TI 16750 */
1117 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1118 serial_outp(up, UART_FCR,
1119 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1120 scratch = serial_in(up, UART_IIR) >> 5;
1121 if (scratch == 7) {
1122 /*
1123 * If this is a 16750, and not a cheap UART
1124 * clone, then it should only go into 64 byte
1125 * mode if the UART_FCR7_64BYTE bit was set
1126 * while UART_LCR_DLAB was latched.
1127 */
1128 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1129 serial_outp(up, UART_LCR, 0);
1130 serial_outp(up, UART_FCR,
1131 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1132 scratch = serial_in(up, UART_IIR) >> 5;
1133 if (scratch == 6)
1134 up->port.type = PORT_16750;
1135 }
1136 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1137 }
1138 serial_outp(up, UART_LCR, save_lcr);
1139 if (up->port.type == PORT_16450) {
1140 scratch = serial_in(up, UART_SCR);
1141 serial_outp(up, UART_SCR, 0xa5);
1142 status1 = serial_in(up, UART_SCR);
1143 serial_outp(up, UART_SCR, 0x5a);
1144 status2 = serial_in(up, UART_SCR);
1145 serial_outp(up, UART_SCR, scratch);
1146
1147 if ((status1 != 0xa5) || (status2 != 0x5a))
1148 up->port.type = PORT_8250;
1149 }
1150
1151 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1152
1153 if (up->port.type == PORT_UNKNOWN)
1154 goto out;
1155 up->type_probed = up->port.type; /* XXX */
1156
1157 /*
1158 * Reset the UART.
1159 */
1160#ifdef CONFIG_SERIAL_8250_RSA
1161 if (up->port.type == PORT_RSA)
1162 serial_outp(up, UART_RSA_FRR, 0);
1163#endif
1164 serial_outp(up, UART_MCR, save_mcr);
1165 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1166 UART_FCR_CLEAR_RCVR |
1167 UART_FCR_CLEAR_XMIT));
1168 serial_outp(up, UART_FCR, 0);
1169 (void)serial_in(up, UART_RX);
1170 serial_outp(up, UART_IER, 0);
1171
1172out:
1173 spin_unlock_irqrestore(&up->port.lock, flags);
1174}
1175
1176static struct uart_driver sunsu_reg = {
1177 .owner = THIS_MODULE,
1178 .driver_name = "sunsu",
1179 .dev_name = "ttyS",
1180 .major = TTY_MAJOR,
1181};
1182
1183static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1184{
1185 int quot, baud;
1186#ifdef CONFIG_SERIO
1187 struct serio *serio;
1188#endif
1189
1190 if (up->su_type == SU_PORT_KBD) {
1191 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1192 baud = 1200;
1193 } else {
1194 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1195 baud = 4800;
1196 }
1197 quot = up->port.uartclk / (16 * baud);
1198
1199 sunsu_autoconfig(up);
1200 if (up->port.type == PORT_UNKNOWN)
1201 return -ENODEV;
1202
1203 printk("%s: %s port at %llx, irq %u\n",
1204 up->port.dev->of_node->full_name,
1205 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1206 (unsigned long long) up->port.mapbase,
1207 up->port.irq);
1208
1209#ifdef CONFIG_SERIO
1210 serio = &up->serio;
1211 serio->port_data = up;
1212
1213 serio->id.type = SERIO_RS232;
1214 if (up->su_type == SU_PORT_KBD) {
1215 serio->id.proto = SERIO_SUNKBD;
1216 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1217 } else {
1218 serio->id.proto = SERIO_SUN;
1219 serio->id.extra = 1;
1220 strlcpy(serio->name, "sums", sizeof(serio->name));
1221 }
1222 strlcpy(serio->phys,
1223 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1224 sizeof(serio->phys));
1225
1226 serio->write = sunsu_serio_write;
1227 serio->open = sunsu_serio_open;
1228 serio->close = sunsu_serio_close;
1229 serio->dev.parent = up->port.dev;
1230
1231 serio_register_port(serio);
1232#endif
1233
1234 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1235
1236 sunsu_startup(&up->port);
1237 return 0;
1238}
1239
1240/*
1241 * ------------------------------------------------------------
1242 * Serial console driver
1243 * ------------------------------------------------------------
1244 */
1245
1246#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1247
1248#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1249
1250/*
1251 * Wait for transmitter & holding register to empty
1252 */
1253static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
1254{
1255 unsigned int status, tmout = 10000;
1256
1257 /* Wait up to 10ms for the character(s) to be sent. */
1258 do {
1259 status = serial_in(up, UART_LSR);
1260
1261 if (status & UART_LSR_BI)
1262 up->lsr_break_flag = UART_LSR_BI;
1263
1264 if (--tmout == 0)
1265 break;
1266 udelay(1);
1267 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1268
1269 /* Wait up to 1s for flow control if necessary */
1270 if (up->port.flags & UPF_CONS_FLOW) {
1271 tmout = 1000000;
1272 while (--tmout &&
1273 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1274 udelay(1);
1275 }
1276}
1277
1278static void sunsu_console_putchar(struct uart_port *port, int ch)
1279{
1280 struct uart_sunsu_port *up = (struct uart_sunsu_port *)port;
1281
1282 wait_for_xmitr(up);
1283 serial_out(up, UART_TX, ch);
1284}
1285
1286/*
1287 * Print a string to the serial port trying not to disturb
1288 * any possible real use of the port...
1289 */
1290static void sunsu_console_write(struct console *co, const char *s,
1291 unsigned int count)
1292{
1293 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1294 unsigned long flags;
1295 unsigned int ier;
1296 int locked = 1;
1297
1298 if (up->port.sysrq || oops_in_progress)
1299 locked = spin_trylock_irqsave(&up->port.lock, flags);
1300 else
1301 spin_lock_irqsave(&up->port.lock, flags);
1302
1303 /*
1304 * First save the UER then disable the interrupts
1305 */
1306 ier = serial_in(up, UART_IER);
1307 serial_out(up, UART_IER, 0);
1308
1309 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1310
1311 /*
1312 * Finally, wait for transmitter to become empty
1313 * and restore the IER
1314 */
1315 wait_for_xmitr(up);
1316 serial_out(up, UART_IER, ier);
1317
1318 if (locked)
1319 spin_unlock_irqrestore(&up->port.lock, flags);
1320}
1321
1322/*
1323 * Setup initial baud/bits/parity. We do two things here:
1324 * - construct a cflag setting for the first su_open()
1325 * - initialize the serial port
1326 * Return non-zero if we didn't find a serial port.
1327 */
1328static int __init sunsu_console_setup(struct console *co, char *options)
1329{
1330 static struct ktermios dummy;
1331 struct ktermios termios;
1332 struct uart_port *port;
1333
1334 printk("Console: ttyS%d (SU)\n",
1335 (sunsu_reg.minor - 64) + co->index);
1336
1337 if (co->index > nr_inst)
1338 return -ENODEV;
1339 port = &sunsu_ports[co->index].port;
1340
1341 /*
1342 * Temporary fix.
1343 */
1344 spin_lock_init(&port->lock);
1345
1346 /* Get firmware console settings. */
1347 sunserial_console_termios(co, port->dev->of_node);
1348
1349 memset(&termios, 0, sizeof(struct ktermios));
1350 termios.c_cflag = co->cflag;
1351 port->mctrl |= TIOCM_DTR;
1352 port->ops->set_termios(port, &termios, &dummy);
1353
1354 return 0;
1355}
1356
1357static struct console sunsu_console = {
1358 .name = "ttyS",
1359 .write = sunsu_console_write,
1360 .device = uart_console_device,
1361 .setup = sunsu_console_setup,
1362 .flags = CON_PRINTBUFFER,
1363 .index = -1,
1364 .data = &sunsu_reg,
1365};
1366
1367/*
1368 * Register console.
1369 */
1370
1371static inline struct console *SUNSU_CONSOLE(void)
1372{
1373 return &sunsu_console;
1374}
1375#else
1376#define SUNSU_CONSOLE() (NULL)
1377#define sunsu_serial_console_init() do { } while (0)
1378#endif
1379
1380static enum su_type su_get_type(struct device_node *dp)
1381{
1382 struct device_node *ap = of_find_node_by_path("/aliases");
1383
1384 if (ap) {
1385 const char *keyb = of_get_property(ap, "keyboard", NULL);
1386 const char *ms = of_get_property(ap, "mouse", NULL);
1387
1388 if (keyb) {
1389 if (dp == of_find_node_by_path(keyb))
1390 return SU_PORT_KBD;
1391 }
1392 if (ms) {
1393 if (dp == of_find_node_by_path(ms))
1394 return SU_PORT_MS;
1395 }
1396 }
1397
1398 return SU_PORT_PORT;
1399}
1400
1401static int su_probe(struct platform_device *op)
1402{
1403 struct device_node *dp = op->dev.of_node;
1404 struct uart_sunsu_port *up;
1405 struct resource *rp;
1406 enum su_type type;
1407 bool ignore_line;
1408 int err;
1409
1410 type = su_get_type(dp);
1411 if (type == SU_PORT_PORT) {
1412 if (nr_inst >= UART_NR)
1413 return -EINVAL;
1414 up = &sunsu_ports[nr_inst];
1415 } else {
1416 up = kzalloc(sizeof(*up), GFP_KERNEL);
1417 if (!up)
1418 return -ENOMEM;
1419 }
1420
1421 up->port.line = nr_inst;
1422
1423 spin_lock_init(&up->port.lock);
1424
1425 up->su_type = type;
1426
1427 rp = &op->resource[0];
1428 up->port.mapbase = rp->start;
1429 up->reg_size = resource_size(rp);
1430 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1431 if (!up->port.membase) {
1432 if (type != SU_PORT_PORT)
1433 kfree(up);
1434 return -ENOMEM;
1435 }
1436
1437 up->port.irq = op->archdata.irqs[0];
1438
1439 up->port.dev = &op->dev;
1440
1441 up->port.type = PORT_UNKNOWN;
1442 up->port.uartclk = (SU_BASE_BAUD * 16);
1443
1444 err = 0;
1445 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1446 err = sunsu_kbd_ms_init(up);
1447 if (err) {
1448 of_iounmap(&op->resource[0],
1449 up->port.membase, up->reg_size);
1450 kfree(up);
1451 return err;
1452 }
1453 platform_set_drvdata(op, up);
1454
1455 nr_inst++;
1456
1457 return 0;
1458 }
1459
1460 up->port.flags |= UPF_BOOT_AUTOCONF;
1461
1462 sunsu_autoconfig(up);
1463
1464 err = -ENODEV;
1465 if (up->port.type == PORT_UNKNOWN)
1466 goto out_unmap;
1467
1468 up->port.ops = &sunsu_pops;
1469
1470 ignore_line = false;
1471 if (!strcmp(dp->name, "rsc-console") ||
1472 !strcmp(dp->name, "lom-console"))
1473 ignore_line = true;
1474
1475 sunserial_console_match(SUNSU_CONSOLE(), dp,
1476 &sunsu_reg, up->port.line,
1477 ignore_line);
1478 err = uart_add_one_port(&sunsu_reg, &up->port);
1479 if (err)
1480 goto out_unmap;
1481
1482 platform_set_drvdata(op, up);
1483
1484 nr_inst++;
1485
1486 return 0;
1487
1488out_unmap:
1489 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1490 return err;
1491}
1492
1493static int su_remove(struct platform_device *op)
1494{
1495 struct uart_sunsu_port *up = platform_get_drvdata(op);
1496 bool kbdms = false;
1497
1498 if (up->su_type == SU_PORT_MS ||
1499 up->su_type == SU_PORT_KBD)
1500 kbdms = true;
1501
1502 if (kbdms) {
1503#ifdef CONFIG_SERIO
1504 serio_unregister_port(&up->serio);
1505#endif
1506 } else if (up->port.type != PORT_UNKNOWN)
1507 uart_remove_one_port(&sunsu_reg, &up->port);
1508
1509 if (up->port.membase)
1510 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1511
1512 if (kbdms)
1513 kfree(up);
1514
1515 return 0;
1516}
1517
1518static const struct of_device_id su_match[] = {
1519 {
1520 .name = "su",
1521 },
1522 {
1523 .name = "su_pnp",
1524 },
1525 {
1526 .name = "serial",
1527 .compatible = "su",
1528 },
1529 {
1530 .type = "serial",
1531 .compatible = "su",
1532 },
1533 {},
1534};
1535MODULE_DEVICE_TABLE(of, su_match);
1536
1537static struct platform_driver su_driver = {
1538 .driver = {
1539 .name = "su",
1540 .owner = THIS_MODULE,
1541 .of_match_table = su_match,
1542 },
1543 .probe = su_probe,
1544 .remove = su_remove,
1545};
1546
1547static int __init sunsu_init(void)
1548{
1549 struct device_node *dp;
1550 int err;
1551 int num_uart = 0;
1552
1553 for_each_node_by_name(dp, "su") {
1554 if (su_get_type(dp) == SU_PORT_PORT)
1555 num_uart++;
1556 }
1557 for_each_node_by_name(dp, "su_pnp") {
1558 if (su_get_type(dp) == SU_PORT_PORT)
1559 num_uart++;
1560 }
1561 for_each_node_by_name(dp, "serial") {
1562 if (of_device_is_compatible(dp, "su")) {
1563 if (su_get_type(dp) == SU_PORT_PORT)
1564 num_uart++;
1565 }
1566 }
1567 for_each_node_by_type(dp, "serial") {
1568 if (of_device_is_compatible(dp, "su")) {
1569 if (su_get_type(dp) == SU_PORT_PORT)
1570 num_uart++;
1571 }
1572 }
1573
1574 if (num_uart) {
1575 err = sunserial_register_minors(&sunsu_reg, num_uart);
1576 if (err)
1577 return err;
1578 }
1579
1580 err = platform_driver_register(&su_driver);
1581 if (err && num_uart)
1582 sunserial_unregister_minors(&sunsu_reg, num_uart);
1583
1584 return err;
1585}
1586
1587static void __exit sunsu_exit(void)
1588{
1589 platform_driver_unregister(&su_driver);
1590 if (sunsu_reg.nr)
1591 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1592}
1593
1594module_init(sunsu_init);
1595module_exit(sunsu_exit);
1596
1597MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1598MODULE_DESCRIPTION("Sun SU serial port driver");
1599MODULE_VERSION("2.0");
1600MODULE_LICENSE("GPL");