Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
4 * Copyright (c) 2008-2009 Marvell Semiconductor
5 */
6
7#include <linux/delay.h>
8#include <linux/etherdevice.h>
9#include <linux/jiffies.h>
10#include <linux/list.h>
11#include <linux/module.h>
12#include <linux/netdevice.h>
13#include <linux/phy.h>
14#include <net/dsa.h>
15#include "mv88e6060.h"
16
17static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
18{
19 return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
20}
21
22static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
23{
24 return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
25}
26
27static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
28{
29 int ret;
30
31 ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
32 if (ret >= 0) {
33 if (ret == PORT_SWITCH_ID_6060)
34 return "Marvell 88E6060 (A0)";
35 if (ret == PORT_SWITCH_ID_6060_R1 ||
36 ret == PORT_SWITCH_ID_6060_R2)
37 return "Marvell 88E6060 (B0)";
38 if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
39 return "Marvell 88E6060";
40 }
41
42 return NULL;
43}
44
45static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
46 int port)
47{
48 return DSA_TAG_PROTO_TRAILER;
49}
50
51static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
52{
53 int i;
54 int ret;
55 unsigned long timeout;
56
57 /* Set all ports to the disabled state. */
58 for (i = 0; i < MV88E6060_PORTS; i++) {
59 ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
60 if (ret < 0)
61 return ret;
62 ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
63 ret & ~PORT_CONTROL_STATE_MASK);
64 if (ret)
65 return ret;
66 }
67
68 /* Wait for transmit queues to drain. */
69 usleep_range(2000, 4000);
70
71 /* Reset the switch. */
72 ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
73 GLOBAL_ATU_CONTROL_SWRESET |
74 GLOBAL_ATU_CONTROL_LEARNDIS);
75 if (ret)
76 return ret;
77
78 /* Wait up to one second for reset to complete. */
79 timeout = jiffies + 1 * HZ;
80 while (time_before(jiffies, timeout)) {
81 ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
82 if (ret < 0)
83 return ret;
84
85 if (ret & GLOBAL_STATUS_INIT_READY)
86 break;
87
88 usleep_range(1000, 2000);
89 }
90 if (time_after(jiffies, timeout))
91 return -ETIMEDOUT;
92
93 return 0;
94}
95
96static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
97{
98 int ret;
99
100 /* Disable discarding of frames with excessive collisions,
101 * set the maximum frame size to 1536 bytes, and mask all
102 * interrupt sources.
103 */
104 ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
105 GLOBAL_CONTROL_MAX_FRAME_1536);
106 if (ret)
107 return ret;
108
109 /* Disable automatic address learning.
110 */
111 return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
112 GLOBAL_ATU_CONTROL_LEARNDIS);
113}
114
115static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
116{
117 int addr = REG_PORT(p);
118 int ret;
119
120 /* Do not force flow control, disable Ingress and Egress
121 * Header tagging, disable VLAN tunneling, and set the port
122 * state to Forwarding. Additionally, if this is the CPU
123 * port, enable Ingress and Egress Trailer tagging mode.
124 */
125 ret = reg_write(priv, addr, PORT_CONTROL,
126 dsa_is_cpu_port(priv->ds, p) ?
127 PORT_CONTROL_TRAILER |
128 PORT_CONTROL_INGRESS_MODE |
129 PORT_CONTROL_STATE_FORWARDING :
130 PORT_CONTROL_STATE_FORWARDING);
131 if (ret)
132 return ret;
133
134 /* Port based VLAN map: give each port its own address
135 * database, allow the CPU port to talk to each of the 'real'
136 * ports, and allow each of the 'real' ports to only talk to
137 * the CPU port.
138 */
139 ret = reg_write(priv, addr, PORT_VLAN_MAP,
140 ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
141 (dsa_is_cpu_port(priv->ds, p) ?
142 dsa_user_ports(priv->ds) :
143 BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
144 if (ret)
145 return ret;
146
147 /* Port Association Vector: when learning source addresses
148 * of packets, add the address to the address database using
149 * a port bitmap that has only the bit for this port set and
150 * the other bits clear.
151 */
152 return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
153}
154
155static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
156{
157 u8 addr[ETH_ALEN];
158 int ret;
159 u16 val;
160
161 eth_random_addr(addr);
162
163 val = addr[0] << 8 | addr[1];
164
165 /* The multicast bit is always transmitted as a zero, so the switch uses
166 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
167 */
168 val &= 0xfeff;
169
170 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
171 if (ret)
172 return ret;
173
174 ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
175 (addr[2] << 8) | addr[3]);
176 if (ret)
177 return ret;
178
179 return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
180 (addr[4] << 8) | addr[5]);
181}
182
183static int mv88e6060_setup(struct dsa_switch *ds)
184{
185 struct mv88e6060_priv *priv = ds->priv;
186 int ret;
187 int i;
188
189 priv->ds = ds;
190
191 ret = mv88e6060_switch_reset(priv);
192 if (ret < 0)
193 return ret;
194
195 /* @@@ initialise atu */
196
197 ret = mv88e6060_setup_global(priv);
198 if (ret < 0)
199 return ret;
200
201 ret = mv88e6060_setup_addr(priv);
202 if (ret < 0)
203 return ret;
204
205 for (i = 0; i < MV88E6060_PORTS; i++) {
206 ret = mv88e6060_setup_port(priv, i);
207 if (ret < 0)
208 return ret;
209 }
210
211 return 0;
212}
213
214static int mv88e6060_port_to_phy_addr(int port)
215{
216 if (port >= 0 && port < MV88E6060_PORTS)
217 return port;
218 return -1;
219}
220
221static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
222{
223 struct mv88e6060_priv *priv = ds->priv;
224 int addr;
225
226 addr = mv88e6060_port_to_phy_addr(port);
227 if (addr == -1)
228 return 0xffff;
229
230 return reg_read(priv, addr, regnum);
231}
232
233static int
234mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
235{
236 struct mv88e6060_priv *priv = ds->priv;
237 int addr;
238
239 addr = mv88e6060_port_to_phy_addr(port);
240 if (addr == -1)
241 return 0xffff;
242
243 return reg_write(priv, addr, regnum, val);
244}
245
246static const struct dsa_switch_ops mv88e6060_switch_ops = {
247 .get_tag_protocol = mv88e6060_get_tag_protocol,
248 .setup = mv88e6060_setup,
249 .phy_read = mv88e6060_phy_read,
250 .phy_write = mv88e6060_phy_write,
251};
252
253static int mv88e6060_probe(struct mdio_device *mdiodev)
254{
255 struct device *dev = &mdiodev->dev;
256 struct mv88e6060_priv *priv;
257 struct dsa_switch *ds;
258 const char *name;
259
260 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
261 if (!priv)
262 return -ENOMEM;
263
264 priv->bus = mdiodev->bus;
265 priv->sw_addr = mdiodev->addr;
266
267 name = mv88e6060_get_name(priv->bus, priv->sw_addr);
268 if (!name)
269 return -ENODEV;
270
271 dev_info(dev, "switch %s detected\n", name);
272
273 ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
274 if (!ds)
275 return -ENOMEM;
276
277 ds->priv = priv;
278 ds->dev = dev;
279 ds->ops = &mv88e6060_switch_ops;
280
281 dev_set_drvdata(dev, ds);
282
283 return dsa_register_switch(ds);
284}
285
286static void mv88e6060_remove(struct mdio_device *mdiodev)
287{
288 struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
289
290 dsa_unregister_switch(ds);
291}
292
293static const struct of_device_id mv88e6060_of_match[] = {
294 {
295 .compatible = "marvell,mv88e6060",
296 },
297 { /* sentinel */ },
298};
299
300static struct mdio_driver mv88e6060_driver = {
301 .probe = mv88e6060_probe,
302 .remove = mv88e6060_remove,
303 .mdiodrv.driver = {
304 .name = "mv88e6060",
305 .of_match_table = mv88e6060_of_match,
306 },
307};
308
309mdio_module_driver(mv88e6060_driver);
310
311MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
312MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
313MODULE_LICENSE("GPL");
314MODULE_ALIAS("platform:mv88e6060");
1/*
2 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
3 * Copyright (c) 2008-2009 Marvell Semiconductor
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 */
10
11#include <linux/delay.h>
12#include <linux/jiffies.h>
13#include <linux/list.h>
14#include <linux/module.h>
15#include <linux/netdevice.h>
16#include <linux/phy.h>
17#include <net/dsa.h>
18
19#define REG_PORT(p) (8 + (p))
20#define REG_GLOBAL 0x0f
21
22static int reg_read(struct dsa_switch *ds, int addr, int reg)
23{
24 return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg);
25}
26
27#define REG_READ(addr, reg) \
28 ({ \
29 int __ret; \
30 \
31 __ret = reg_read(ds, addr, reg); \
32 if (__ret < 0) \
33 return __ret; \
34 __ret; \
35 })
36
37
38static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
39{
40 return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr,
41 reg, val);
42}
43
44#define REG_WRITE(addr, reg, val) \
45 ({ \
46 int __ret; \
47 \
48 __ret = reg_write(ds, addr, reg, val); \
49 if (__ret < 0) \
50 return __ret; \
51 })
52
53static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
54{
55 int ret;
56
57 ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
58 if (ret >= 0) {
59 ret &= 0xfff0;
60 if (ret == 0x0600)
61 return "Marvell 88E6060";
62 }
63
64 return NULL;
65}
66
67static int mv88e6060_switch_reset(struct dsa_switch *ds)
68{
69 int i;
70 int ret;
71 unsigned long timeout;
72
73 /* Set all ports to the disabled state. */
74 for (i = 0; i < 6; i++) {
75 ret = REG_READ(REG_PORT(i), 0x04);
76 REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
77 }
78
79 /* Wait for transmit queues to drain. */
80 usleep_range(2000, 4000);
81
82 /* Reset the switch. */
83 REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
84
85 /* Wait up to one second for reset to complete. */
86 timeout = jiffies + 1 * HZ;
87 while (time_before(jiffies, timeout)) {
88 ret = REG_READ(REG_GLOBAL, 0x00);
89 if ((ret & 0x8000) == 0x0000)
90 break;
91
92 usleep_range(1000, 2000);
93 }
94 if (time_after(jiffies, timeout))
95 return -ETIMEDOUT;
96
97 return 0;
98}
99
100static int mv88e6060_setup_global(struct dsa_switch *ds)
101{
102 /* Disable discarding of frames with excessive collisions,
103 * set the maximum frame size to 1536 bytes, and mask all
104 * interrupt sources.
105 */
106 REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
107
108 /* Enable automatic address learning, set the address
109 * database size to 1024 entries, and set the default aging
110 * time to 5 minutes.
111 */
112 REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
113
114 return 0;
115}
116
117static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
118{
119 int addr = REG_PORT(p);
120
121 /* Do not force flow control, disable Ingress and Egress
122 * Header tagging, disable VLAN tunneling, and set the port
123 * state to Forwarding. Additionally, if this is the CPU
124 * port, enable Ingress and Egress Trailer tagging mode.
125 */
126 REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
127
128 /* Port based VLAN map: give each port its own address
129 * database, allow the CPU port to talk to each of the 'real'
130 * ports, and allow each of the 'real' ports to only talk to
131 * the CPU port.
132 */
133 REG_WRITE(addr, 0x06,
134 ((p & 0xf) << 12) |
135 (dsa_is_cpu_port(ds, p) ?
136 ds->phys_port_mask :
137 (1 << ds->dst->cpu_port)));
138
139 /* Port Association Vector: when learning source addresses
140 * of packets, add the address to the address database using
141 * a port bitmap that has only the bit for this port set and
142 * the other bits clear.
143 */
144 REG_WRITE(addr, 0x0b, 1 << p);
145
146 return 0;
147}
148
149static int mv88e6060_setup(struct dsa_switch *ds)
150{
151 int i;
152 int ret;
153
154 ret = mv88e6060_switch_reset(ds);
155 if (ret < 0)
156 return ret;
157
158 /* @@@ initialise atu */
159
160 ret = mv88e6060_setup_global(ds);
161 if (ret < 0)
162 return ret;
163
164 for (i = 0; i < 6; i++) {
165 ret = mv88e6060_setup_port(ds, i);
166 if (ret < 0)
167 return ret;
168 }
169
170 return 0;
171}
172
173static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
174{
175 REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
176 REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
177 REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
178
179 return 0;
180}
181
182static int mv88e6060_port_to_phy_addr(int port)
183{
184 if (port >= 0 && port <= 5)
185 return port;
186 return -1;
187}
188
189static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
190{
191 int addr;
192
193 addr = mv88e6060_port_to_phy_addr(port);
194 if (addr == -1)
195 return 0xffff;
196
197 return reg_read(ds, addr, regnum);
198}
199
200static int
201mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
202{
203 int addr;
204
205 addr = mv88e6060_port_to_phy_addr(port);
206 if (addr == -1)
207 return 0xffff;
208
209 return reg_write(ds, addr, regnum, val);
210}
211
212static void mv88e6060_poll_link(struct dsa_switch *ds)
213{
214 int i;
215
216 for (i = 0; i < DSA_MAX_PORTS; i++) {
217 struct net_device *dev;
218 int uninitialized_var(port_status);
219 int link;
220 int speed;
221 int duplex;
222 int fc;
223
224 dev = ds->ports[i];
225 if (dev == NULL)
226 continue;
227
228 link = 0;
229 if (dev->flags & IFF_UP) {
230 port_status = reg_read(ds, REG_PORT(i), 0x00);
231 if (port_status < 0)
232 continue;
233
234 link = !!(port_status & 0x1000);
235 }
236
237 if (!link) {
238 if (netif_carrier_ok(dev)) {
239 netdev_info(dev, "link down\n");
240 netif_carrier_off(dev);
241 }
242 continue;
243 }
244
245 speed = (port_status & 0x0100) ? 100 : 10;
246 duplex = (port_status & 0x0200) ? 1 : 0;
247 fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
248
249 if (!netif_carrier_ok(dev)) {
250 netdev_info(dev,
251 "link up, %d Mb/s, %s duplex, flow control %sabled\n",
252 speed,
253 duplex ? "full" : "half",
254 fc ? "en" : "dis");
255 netif_carrier_on(dev);
256 }
257 }
258}
259
260static struct dsa_switch_driver mv88e6060_switch_driver = {
261 .tag_protocol = htons(ETH_P_TRAILER),
262 .probe = mv88e6060_probe,
263 .setup = mv88e6060_setup,
264 .set_addr = mv88e6060_set_addr,
265 .phy_read = mv88e6060_phy_read,
266 .phy_write = mv88e6060_phy_write,
267 .poll_link = mv88e6060_poll_link,
268};
269
270static int __init mv88e6060_init(void)
271{
272 register_switch_driver(&mv88e6060_switch_driver);
273 return 0;
274}
275module_init(mv88e6060_init);
276
277static void __exit mv88e6060_cleanup(void)
278{
279 unregister_switch_driver(&mv88e6060_switch_driver);
280}
281module_exit(mv88e6060_cleanup);
282
283MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
284MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
285MODULE_LICENSE("GPL");
286MODULE_ALIAS("platform:mv88e6060");