Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments
4 * Author: Rob Clark <robdclark@gmail.com>
5 */
6
7#include <linux/delay.h>
8#include <linux/dma-mapping.h>
9#include <linux/of_graph.h>
10#include <linux/pm_runtime.h>
11
12#include <drm/drm_atomic.h>
13#include <drm/drm_atomic_helper.h>
14#include <drm/drm_crtc.h>
15#include <drm/drm_fb_cma_helper.h>
16#include <drm/drm_fourcc.h>
17#include <drm/drm_gem_cma_helper.h>
18#include <drm/drm_modeset_helper_vtables.h>
19#include <drm/drm_print.h>
20#include <drm/drm_vblank.h>
21
22#include "tilcdc_drv.h"
23#include "tilcdc_regs.h"
24
25#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000
26#define TILCDC_PALETTE_SIZE 32
27#define TILCDC_PALETTE_FIRST_ENTRY 0x4000
28
29struct tilcdc_crtc {
30 struct drm_crtc base;
31
32 struct drm_plane primary;
33 const struct tilcdc_panel_info *info;
34 struct drm_pending_vblank_event *event;
35 struct mutex enable_lock;
36 bool enabled;
37 bool shutdown;
38 wait_queue_head_t frame_done_wq;
39 bool frame_done;
40 spinlock_t irq_lock;
41
42 unsigned int lcd_fck_rate;
43
44 ktime_t last_vblank;
45 unsigned int hvtotal_us;
46
47 struct drm_framebuffer *next_fb;
48
49 /* Only set if an external encoder is connected */
50 bool simulate_vesa_sync;
51
52 int sync_lost_count;
53 bool frame_intact;
54 struct work_struct recover_work;
55
56 dma_addr_t palette_dma_handle;
57 u16 *palette_base;
58 struct completion palette_loaded;
59};
60#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
61
62static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
63{
64 struct drm_device *dev = crtc->dev;
65 struct tilcdc_drm_private *priv = dev->dev_private;
66 struct drm_gem_cma_object *gem;
67 dma_addr_t start, end;
68 u64 dma_base_and_ceiling;
69
70 gem = drm_fb_cma_get_gem_obj(fb, 0);
71
72 start = gem->paddr + fb->offsets[0] +
73 crtc->y * fb->pitches[0] +
74 crtc->x * fb->format->cpp[0];
75
76 end = start + (crtc->mode.vdisplay * fb->pitches[0]);
77
78 /* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
79 * with a single insruction, if available. This should make it more
80 * unlikely that LCDC would fetch the DMA addresses in the middle of
81 * an update.
82 */
83 if (priv->rev == 1)
84 end -= 1;
85
86 dma_base_and_ceiling = (u64)end << 32 | start;
87 tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
88}
89
90/*
91 * The driver currently only supports only true color formats. For
92 * true color the palette block is bypassed, but a 32 byte palette
93 * should still be loaded. The first 16-bit entry must be 0x4000 while
94 * all other entries must be zeroed.
95 */
96static void tilcdc_crtc_load_palette(struct drm_crtc *crtc)
97{
98 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
99 struct drm_device *dev = crtc->dev;
100 struct tilcdc_drm_private *priv = dev->dev_private;
101 int ret;
102
103 reinit_completion(&tilcdc_crtc->palette_loaded);
104
105 /* Tell the LCDC where the palette is located. */
106 tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG,
107 tilcdc_crtc->palette_dma_handle);
108 tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG,
109 (u32) tilcdc_crtc->palette_dma_handle +
110 TILCDC_PALETTE_SIZE - 1);
111
112 /* Set dma load mode for palette loading only. */
113 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
114 LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY),
115 LCDC_PALETTE_LOAD_MODE_MASK);
116
117 /* Enable DMA Palette Loaded Interrupt */
118 if (priv->rev == 1)
119 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
120 else
121 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA);
122
123 /* Enable LCDC DMA and wait for palette to be loaded. */
124 tilcdc_clear_irqstatus(dev, 0xffffffff);
125 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
126
127 ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded,
128 msecs_to_jiffies(50));
129 if (ret == 0)
130 dev_err(dev->dev, "%s: Palette loading timeout", __func__);
131
132 /* Disable LCDC DMA and DMA Palette Loaded Interrupt. */
133 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
134 if (priv->rev == 1)
135 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
136 else
137 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA);
138}
139
140static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
141{
142 struct tilcdc_drm_private *priv = dev->dev_private;
143
144 tilcdc_clear_irqstatus(dev, 0xffffffff);
145
146 if (priv->rev == 1) {
147 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
148 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
149 LCDC_V1_UNDERFLOW_INT_ENA);
150 tilcdc_set(dev, LCDC_DMA_CTRL_REG,
151 LCDC_V1_END_OF_FRAME_INT_ENA);
152 } else {
153 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
154 LCDC_V2_UNDERFLOW_INT_ENA |
155 LCDC_V2_END_OF_FRAME0_INT_ENA |
156 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
157 }
158}
159
160static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
161{
162 struct tilcdc_drm_private *priv = dev->dev_private;
163
164 /* disable irqs that we might have enabled: */
165 if (priv->rev == 1) {
166 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
167 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
168 LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
169 tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
170 LCDC_V1_END_OF_FRAME_INT_ENA);
171 } else {
172 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
173 LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
174 LCDC_V2_END_OF_FRAME0_INT_ENA |
175 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
176 }
177}
178
179static void reset(struct drm_crtc *crtc)
180{
181 struct drm_device *dev = crtc->dev;
182 struct tilcdc_drm_private *priv = dev->dev_private;
183
184 if (priv->rev != 2)
185 return;
186
187 tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
188 usleep_range(250, 1000);
189 tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
190}
191
192/*
193 * Calculate the percentage difference between the requested pixel clock rate
194 * and the effective rate resulting from calculating the clock divider value.
195 */
196static unsigned int tilcdc_pclk_diff(unsigned long rate,
197 unsigned long real_rate)
198{
199 int r = rate / 100, rr = real_rate / 100;
200
201 return (unsigned int)(abs(((rr - r) * 100) / r));
202}
203
204static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
205{
206 struct drm_device *dev = crtc->dev;
207 struct tilcdc_drm_private *priv = dev->dev_private;
208 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
209 unsigned long clk_rate, real_rate, req_rate;
210 unsigned int clkdiv;
211 int ret;
212
213 clkdiv = 2; /* first try using a standard divider of 2 */
214
215 /* mode.clock is in KHz, set_rate wants parameter in Hz */
216 req_rate = crtc->mode.clock * 1000;
217
218 ret = clk_set_rate(priv->clk, req_rate * clkdiv);
219 clk_rate = clk_get_rate(priv->clk);
220 if (ret < 0 || tilcdc_pclk_diff(req_rate, clk_rate) > 5) {
221 /*
222 * If we fail to set the clock rate (some architectures don't
223 * use the common clock framework yet and may not implement
224 * all the clk API calls for every clock), try the next best
225 * thing: adjusting the clock divider, unless clk_get_rate()
226 * failed as well.
227 */
228 if (!clk_rate) {
229 /* Nothing more we can do. Just bail out. */
230 dev_err(dev->dev,
231 "failed to set the pixel clock - unable to read current lcdc clock rate\n");
232 return;
233 }
234
235 clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate);
236
237 /*
238 * Emit a warning if the real clock rate resulting from the
239 * calculated divider differs much from the requested rate.
240 *
241 * 5% is an arbitrary value - LCDs are usually quite tolerant
242 * about pixel clock rates.
243 */
244 real_rate = clkdiv * req_rate;
245
246 if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
247 dev_warn(dev->dev,
248 "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
249 clk_rate, real_rate);
250 }
251 }
252
253 tilcdc_crtc->lcd_fck_rate = clk_rate;
254
255 DBG("lcd_clk=%u, mode clock=%d, div=%u",
256 tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
257
258 /* Configure the LCD clock divisor. */
259 tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
260 LCDC_RASTER_MODE);
261
262 if (priv->rev == 2)
263 tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
264 LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
265 LCDC_V2_CORE_CLK_EN);
266}
267
268static uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode)
269{
270 return (uint) div_u64(1000llu * mode->htotal * mode->vtotal,
271 mode->clock);
272}
273
274static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
275{
276 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
277 struct drm_device *dev = crtc->dev;
278 struct tilcdc_drm_private *priv = dev->dev_private;
279 const struct tilcdc_panel_info *info = tilcdc_crtc->info;
280 uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
281 struct drm_display_mode *mode = &crtc->state->adjusted_mode;
282 struct drm_framebuffer *fb = crtc->primary->state->fb;
283
284 if (WARN_ON(!info))
285 return;
286
287 if (WARN_ON(!fb))
288 return;
289
290 /* Configure the Burst Size and fifo threshold of DMA: */
291 reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
292 switch (info->dma_burst_sz) {
293 case 1:
294 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
295 break;
296 case 2:
297 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
298 break;
299 case 4:
300 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
301 break;
302 case 8:
303 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
304 break;
305 case 16:
306 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
307 break;
308 default:
309 dev_err(dev->dev, "invalid burst size\n");
310 return;
311 }
312 reg |= (info->fifo_th << 8);
313 tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
314
315 /* Configure timings: */
316 hbp = mode->htotal - mode->hsync_end;
317 hfp = mode->hsync_start - mode->hdisplay;
318 hsw = mode->hsync_end - mode->hsync_start;
319 vbp = mode->vtotal - mode->vsync_end;
320 vfp = mode->vsync_start - mode->vdisplay;
321 vsw = mode->vsync_end - mode->vsync_start;
322
323 DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
324 mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
325
326 /* Set AC Bias Period and Number of Transitions per Interrupt: */
327 reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
328 reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
329 LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
330
331 /*
332 * subtract one from hfp, hbp, hsw because the hardware uses
333 * a value of 0 as 1
334 */
335 if (priv->rev == 2) {
336 /* clear bits we're going to set */
337 reg &= ~0x78000033;
338 reg |= ((hfp-1) & 0x300) >> 8;
339 reg |= ((hbp-1) & 0x300) >> 4;
340 reg |= ((hsw-1) & 0x3c0) << 21;
341 }
342 tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
343
344 reg = (((mode->hdisplay >> 4) - 1) << 4) |
345 (((hbp-1) & 0xff) << 24) |
346 (((hfp-1) & 0xff) << 16) |
347 (((hsw-1) & 0x3f) << 10);
348 if (priv->rev == 2)
349 reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
350 tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
351
352 reg = ((mode->vdisplay - 1) & 0x3ff) |
353 ((vbp & 0xff) << 24) |
354 ((vfp & 0xff) << 16) |
355 (((vsw-1) & 0x3f) << 10);
356 tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
357
358 /*
359 * be sure to set Bit 10 for the V2 LCDC controller,
360 * otherwise limited to 1024 pixels width, stopping
361 * 1920x1080 being supported.
362 */
363 if (priv->rev == 2) {
364 if ((mode->vdisplay - 1) & 0x400) {
365 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
366 LCDC_LPP_B10);
367 } else {
368 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
369 LCDC_LPP_B10);
370 }
371 }
372
373 /* Configure display type: */
374 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
375 ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
376 LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
377 0x000ff000 /* Palette Loading Delay bits */);
378 reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
379 if (info->tft_alt_mode)
380 reg |= LCDC_TFT_ALT_ENABLE;
381 if (priv->rev == 2) {
382 switch (fb->format->format) {
383 case DRM_FORMAT_BGR565:
384 case DRM_FORMAT_RGB565:
385 break;
386 case DRM_FORMAT_XBGR8888:
387 case DRM_FORMAT_XRGB8888:
388 reg |= LCDC_V2_TFT_24BPP_UNPACK;
389 /* fallthrough */
390 case DRM_FORMAT_BGR888:
391 case DRM_FORMAT_RGB888:
392 reg |= LCDC_V2_TFT_24BPP_MODE;
393 break;
394 default:
395 dev_err(dev->dev, "invalid pixel format\n");
396 return;
397 }
398 }
399 reg |= info->fdd < 12;
400 tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
401
402 if (info->invert_pxl_clk)
403 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
404 else
405 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
406
407 if (info->sync_ctrl)
408 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
409 else
410 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
411
412 if (info->sync_edge)
413 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
414 else
415 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
416
417 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
418 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
419 else
420 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
421
422 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
423 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
424 else
425 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
426
427 if (info->raster_order)
428 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
429 else
430 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
431
432 tilcdc_crtc_set_clk(crtc);
433
434 tilcdc_crtc_load_palette(crtc);
435
436 set_scanout(crtc, fb);
437
438 crtc->hwmode = crtc->state->adjusted_mode;
439
440 tilcdc_crtc->hvtotal_us =
441 tilcdc_mode_hvtotal(&crtc->hwmode);
442}
443
444static void tilcdc_crtc_enable(struct drm_crtc *crtc)
445{
446 struct drm_device *dev = crtc->dev;
447 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
448 unsigned long flags;
449
450 mutex_lock(&tilcdc_crtc->enable_lock);
451 if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) {
452 mutex_unlock(&tilcdc_crtc->enable_lock);
453 return;
454 }
455
456 pm_runtime_get_sync(dev->dev);
457
458 reset(crtc);
459
460 tilcdc_crtc_set_mode(crtc);
461
462 tilcdc_crtc_enable_irqs(dev);
463
464 tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
465 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
466 LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
467 LCDC_PALETTE_LOAD_MODE_MASK);
468
469 /* There is no real chance for a race here as the time stamp
470 * is taken before the raster DMA is started. The spin-lock is
471 * taken to have a memory barrier after taking the time-stamp
472 * and to avoid a context switch between taking the stamp and
473 * enabling the raster.
474 */
475 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
476 tilcdc_crtc->last_vblank = ktime_get();
477 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
478 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
479
480 drm_crtc_vblank_on(crtc);
481
482 tilcdc_crtc->enabled = true;
483 mutex_unlock(&tilcdc_crtc->enable_lock);
484}
485
486static void tilcdc_crtc_atomic_enable(struct drm_crtc *crtc,
487 struct drm_crtc_state *old_state)
488{
489 tilcdc_crtc_enable(crtc);
490}
491
492static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
493{
494 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
495 struct drm_device *dev = crtc->dev;
496 int ret;
497
498 mutex_lock(&tilcdc_crtc->enable_lock);
499 if (shutdown)
500 tilcdc_crtc->shutdown = true;
501 if (!tilcdc_crtc->enabled) {
502 mutex_unlock(&tilcdc_crtc->enable_lock);
503 return;
504 }
505 tilcdc_crtc->frame_done = false;
506 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
507
508 /*
509 * Wait for framedone irq which will still come before putting
510 * things to sleep..
511 */
512 ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
513 tilcdc_crtc->frame_done,
514 msecs_to_jiffies(500));
515 if (ret == 0)
516 dev_err(dev->dev, "%s: timeout waiting for framedone\n",
517 __func__);
518
519 drm_crtc_vblank_off(crtc);
520
521 tilcdc_crtc_disable_irqs(dev);
522
523 pm_runtime_put_sync(dev->dev);
524
525 tilcdc_crtc->enabled = false;
526 mutex_unlock(&tilcdc_crtc->enable_lock);
527}
528
529static void tilcdc_crtc_disable(struct drm_crtc *crtc)
530{
531 tilcdc_crtc_off(crtc, false);
532}
533
534static void tilcdc_crtc_atomic_disable(struct drm_crtc *crtc,
535 struct drm_crtc_state *old_state)
536{
537 tilcdc_crtc_disable(crtc);
538}
539
540void tilcdc_crtc_shutdown(struct drm_crtc *crtc)
541{
542 tilcdc_crtc_off(crtc, true);
543}
544
545static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
546{
547 return crtc->state && crtc->state->enable && crtc->state->active;
548}
549
550static void tilcdc_crtc_recover_work(struct work_struct *work)
551{
552 struct tilcdc_crtc *tilcdc_crtc =
553 container_of(work, struct tilcdc_crtc, recover_work);
554 struct drm_crtc *crtc = &tilcdc_crtc->base;
555
556 dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__);
557
558 drm_modeset_lock(&crtc->mutex, NULL);
559
560 if (!tilcdc_crtc_is_on(crtc))
561 goto out;
562
563 tilcdc_crtc_disable(crtc);
564 tilcdc_crtc_enable(crtc);
565out:
566 drm_modeset_unlock(&crtc->mutex);
567}
568
569static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
570{
571 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
572
573 tilcdc_crtc_shutdown(crtc);
574
575 flush_workqueue(priv->wq);
576
577 of_node_put(crtc->port);
578 drm_crtc_cleanup(crtc);
579}
580
581int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
582 struct drm_framebuffer *fb,
583 struct drm_pending_vblank_event *event)
584{
585 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
586 struct drm_device *dev = crtc->dev;
587
588 if (tilcdc_crtc->event) {
589 dev_err(dev->dev, "already pending page flip!\n");
590 return -EBUSY;
591 }
592
593 tilcdc_crtc->event = event;
594
595 mutex_lock(&tilcdc_crtc->enable_lock);
596
597 if (tilcdc_crtc->enabled) {
598 unsigned long flags;
599 ktime_t next_vblank;
600 s64 tdiff;
601
602 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
603
604 next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
605 tilcdc_crtc->hvtotal_us);
606 tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
607
608 if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
609 tilcdc_crtc->next_fb = fb;
610 else
611 set_scanout(crtc, fb);
612
613 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
614 }
615
616 mutex_unlock(&tilcdc_crtc->enable_lock);
617
618 return 0;
619}
620
621static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
622 const struct drm_display_mode *mode,
623 struct drm_display_mode *adjusted_mode)
624{
625 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
626
627 if (!tilcdc_crtc->simulate_vesa_sync)
628 return true;
629
630 /*
631 * tilcdc does not generate VESA-compliant sync but aligns
632 * VS on the second edge of HS instead of first edge.
633 * We use adjusted_mode, to fixup sync by aligning both rising
634 * edges and add HSKEW offset to fix the sync.
635 */
636 adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
637 adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
638
639 if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
640 adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
641 adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
642 } else {
643 adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
644 adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
645 }
646
647 return true;
648}
649
650static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
651 struct drm_crtc_state *state)
652{
653 /* If we are not active we don't care */
654 if (!state->active)
655 return 0;
656
657 if (state->state->planes[0].ptr != crtc->primary ||
658 state->state->planes[0].state == NULL ||
659 state->state->planes[0].state->crtc != crtc) {
660 dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
661 return -EINVAL;
662 }
663
664 return 0;
665}
666
667static int tilcdc_crtc_enable_vblank(struct drm_crtc *crtc)
668{
669 return 0;
670}
671
672static void tilcdc_crtc_disable_vblank(struct drm_crtc *crtc)
673{
674}
675
676static void tilcdc_crtc_reset(struct drm_crtc *crtc)
677{
678 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
679 struct drm_device *dev = crtc->dev;
680 int ret;
681
682 drm_atomic_helper_crtc_reset(crtc);
683
684 /* Turn the raster off if it for some reason is on. */
685 pm_runtime_get_sync(dev->dev);
686 if (tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & LCDC_RASTER_ENABLE) {
687 /* Enable DMA Frame Done Interrupt */
688 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_FRAME_DONE);
689 tilcdc_clear_irqstatus(dev, 0xffffffff);
690
691 tilcdc_crtc->frame_done = false;
692 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
693
694 ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
695 tilcdc_crtc->frame_done,
696 msecs_to_jiffies(500));
697 if (ret == 0)
698 dev_err(dev->dev, "%s: timeout waiting for framedone\n",
699 __func__);
700 }
701 pm_runtime_put_sync(dev->dev);
702}
703
704static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
705 .destroy = tilcdc_crtc_destroy,
706 .set_config = drm_atomic_helper_set_config,
707 .page_flip = drm_atomic_helper_page_flip,
708 .reset = tilcdc_crtc_reset,
709 .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
710 .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
711 .enable_vblank = tilcdc_crtc_enable_vblank,
712 .disable_vblank = tilcdc_crtc_disable_vblank,
713};
714
715int tilcdc_crtc_max_width(struct drm_crtc *crtc)
716{
717 struct drm_device *dev = crtc->dev;
718 struct tilcdc_drm_private *priv = dev->dev_private;
719 int max_width = 0;
720
721 if (priv->rev == 1)
722 max_width = 1024;
723 else if (priv->rev == 2)
724 max_width = 2048;
725
726 return max_width;
727}
728
729static enum drm_mode_status
730tilcdc_crtc_mode_valid(struct drm_crtc *crtc,
731 const struct drm_display_mode *mode)
732{
733 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
734 unsigned int bandwidth;
735 uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
736
737 /*
738 * check to see if the width is within the range that
739 * the LCD Controller physically supports
740 */
741 if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
742 return MODE_VIRTUAL_X;
743
744 /* width must be multiple of 16 */
745 if (mode->hdisplay & 0xf)
746 return MODE_VIRTUAL_X;
747
748 if (mode->vdisplay > 2048)
749 return MODE_VIRTUAL_Y;
750
751 DBG("Processing mode %dx%d@%d with pixel clock %d",
752 mode->hdisplay, mode->vdisplay,
753 drm_mode_vrefresh(mode), mode->clock);
754
755 hbp = mode->htotal - mode->hsync_end;
756 hfp = mode->hsync_start - mode->hdisplay;
757 hsw = mode->hsync_end - mode->hsync_start;
758 vbp = mode->vtotal - mode->vsync_end;
759 vfp = mode->vsync_start - mode->vdisplay;
760 vsw = mode->vsync_end - mode->vsync_start;
761
762 if ((hbp-1) & ~0x3ff) {
763 DBG("Pruning mode: Horizontal Back Porch out of range");
764 return MODE_HBLANK_WIDE;
765 }
766
767 if ((hfp-1) & ~0x3ff) {
768 DBG("Pruning mode: Horizontal Front Porch out of range");
769 return MODE_HBLANK_WIDE;
770 }
771
772 if ((hsw-1) & ~0x3ff) {
773 DBG("Pruning mode: Horizontal Sync Width out of range");
774 return MODE_HSYNC_WIDE;
775 }
776
777 if (vbp & ~0xff) {
778 DBG("Pruning mode: Vertical Back Porch out of range");
779 return MODE_VBLANK_WIDE;
780 }
781
782 if (vfp & ~0xff) {
783 DBG("Pruning mode: Vertical Front Porch out of range");
784 return MODE_VBLANK_WIDE;
785 }
786
787 if ((vsw-1) & ~0x3f) {
788 DBG("Pruning mode: Vertical Sync Width out of range");
789 return MODE_VSYNC_WIDE;
790 }
791
792 /*
793 * some devices have a maximum allowed pixel clock
794 * configured from the DT
795 */
796 if (mode->clock > priv->max_pixelclock) {
797 DBG("Pruning mode: pixel clock too high");
798 return MODE_CLOCK_HIGH;
799 }
800
801 /*
802 * some devices further limit the max horizontal resolution
803 * configured from the DT
804 */
805 if (mode->hdisplay > priv->max_width)
806 return MODE_BAD_WIDTH;
807
808 /* filter out modes that would require too much memory bandwidth: */
809 bandwidth = mode->hdisplay * mode->vdisplay *
810 drm_mode_vrefresh(mode);
811 if (bandwidth > priv->max_bandwidth) {
812 DBG("Pruning mode: exceeds defined bandwidth limit");
813 return MODE_BAD;
814 }
815
816 return MODE_OK;
817}
818
819static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
820 .mode_valid = tilcdc_crtc_mode_valid,
821 .mode_fixup = tilcdc_crtc_mode_fixup,
822 .atomic_check = tilcdc_crtc_atomic_check,
823 .atomic_enable = tilcdc_crtc_atomic_enable,
824 .atomic_disable = tilcdc_crtc_atomic_disable,
825};
826
827void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
828 const struct tilcdc_panel_info *info)
829{
830 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
831 tilcdc_crtc->info = info;
832}
833
834void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
835 bool simulate_vesa_sync)
836{
837 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
838
839 tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
840}
841
842void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
843{
844 struct drm_device *dev = crtc->dev;
845 struct tilcdc_drm_private *priv = dev->dev_private;
846 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
847
848 drm_modeset_lock(&crtc->mutex, NULL);
849 if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
850 if (tilcdc_crtc_is_on(crtc)) {
851 pm_runtime_get_sync(dev->dev);
852 tilcdc_crtc_disable(crtc);
853
854 tilcdc_crtc_set_clk(crtc);
855
856 tilcdc_crtc_enable(crtc);
857 pm_runtime_put_sync(dev->dev);
858 }
859 }
860 drm_modeset_unlock(&crtc->mutex);
861}
862
863#define SYNC_LOST_COUNT_LIMIT 50
864
865irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
866{
867 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
868 struct drm_device *dev = crtc->dev;
869 struct tilcdc_drm_private *priv = dev->dev_private;
870 uint32_t stat, reg;
871
872 stat = tilcdc_read_irqstatus(dev);
873 tilcdc_clear_irqstatus(dev, stat);
874
875 if (stat & LCDC_END_OF_FRAME0) {
876 unsigned long flags;
877 bool skip_event = false;
878 ktime_t now;
879
880 now = ktime_get();
881
882 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
883
884 tilcdc_crtc->last_vblank = now;
885
886 if (tilcdc_crtc->next_fb) {
887 set_scanout(crtc, tilcdc_crtc->next_fb);
888 tilcdc_crtc->next_fb = NULL;
889 skip_event = true;
890 }
891
892 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
893
894 drm_crtc_handle_vblank(crtc);
895
896 if (!skip_event) {
897 struct drm_pending_vblank_event *event;
898
899 spin_lock_irqsave(&dev->event_lock, flags);
900
901 event = tilcdc_crtc->event;
902 tilcdc_crtc->event = NULL;
903 if (event)
904 drm_crtc_send_vblank_event(crtc, event);
905
906 spin_unlock_irqrestore(&dev->event_lock, flags);
907 }
908
909 if (tilcdc_crtc->frame_intact)
910 tilcdc_crtc->sync_lost_count = 0;
911 else
912 tilcdc_crtc->frame_intact = true;
913 }
914
915 if (stat & LCDC_FIFO_UNDERFLOW)
916 dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow",
917 __func__, stat);
918
919 if (stat & LCDC_PL_LOAD_DONE) {
920 complete(&tilcdc_crtc->palette_loaded);
921 if (priv->rev == 1)
922 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
923 LCDC_V1_PL_INT_ENA);
924 else
925 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
926 LCDC_V2_PL_INT_ENA);
927 }
928
929 if (stat & LCDC_SYNC_LOST) {
930 dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
931 __func__, stat);
932 tilcdc_crtc->frame_intact = false;
933 if (priv->rev == 1) {
934 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG);
935 if (reg & LCDC_RASTER_ENABLE) {
936 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
937 LCDC_RASTER_ENABLE);
938 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
939 LCDC_RASTER_ENABLE);
940 }
941 } else {
942 if (tilcdc_crtc->sync_lost_count++ >
943 SYNC_LOST_COUNT_LIMIT) {
944 dev_err(dev->dev,
945 "%s(0x%08x): Sync lost flood detected, recovering",
946 __func__, stat);
947 queue_work(system_wq,
948 &tilcdc_crtc->recover_work);
949 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
950 LCDC_SYNC_LOST);
951 tilcdc_crtc->sync_lost_count = 0;
952 }
953 }
954 }
955
956 if (stat & LCDC_FRAME_DONE) {
957 tilcdc_crtc->frame_done = true;
958 wake_up(&tilcdc_crtc->frame_done_wq);
959 /* rev 1 lcdc appears to hang if irq is not disbaled here */
960 if (priv->rev == 1)
961 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
962 LCDC_V1_FRAME_DONE_INT_ENA);
963 }
964
965 /* For revision 2 only */
966 if (priv->rev == 2) {
967 /* Indicate to LCDC that the interrupt service routine has
968 * completed, see 13.3.6.1.6 in AM335x TRM.
969 */
970 tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
971 }
972
973 return IRQ_HANDLED;
974}
975
976int tilcdc_crtc_create(struct drm_device *dev)
977{
978 struct tilcdc_drm_private *priv = dev->dev_private;
979 struct tilcdc_crtc *tilcdc_crtc;
980 struct drm_crtc *crtc;
981 int ret;
982
983 tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
984 if (!tilcdc_crtc)
985 return -ENOMEM;
986
987 init_completion(&tilcdc_crtc->palette_loaded);
988 tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev,
989 TILCDC_PALETTE_SIZE,
990 &tilcdc_crtc->palette_dma_handle,
991 GFP_KERNEL | __GFP_ZERO);
992 if (!tilcdc_crtc->palette_base)
993 return -ENOMEM;
994 *tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY;
995
996 crtc = &tilcdc_crtc->base;
997
998 ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
999 if (ret < 0)
1000 goto fail;
1001
1002 mutex_init(&tilcdc_crtc->enable_lock);
1003
1004 init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
1005
1006 spin_lock_init(&tilcdc_crtc->irq_lock);
1007 INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work);
1008
1009 ret = drm_crtc_init_with_planes(dev, crtc,
1010 &tilcdc_crtc->primary,
1011 NULL,
1012 &tilcdc_crtc_funcs,
1013 "tilcdc crtc");
1014 if (ret < 0)
1015 goto fail;
1016
1017 drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
1018
1019 if (priv->is_componentized) {
1020 crtc->port = of_graph_get_port_by_id(dev->dev->of_node, 0);
1021 if (!crtc->port) { /* This should never happen */
1022 dev_err(dev->dev, "Port node not found in %pOF\n",
1023 dev->dev->of_node);
1024 ret = -EINVAL;
1025 goto fail;
1026 }
1027 }
1028
1029 priv->crtc = crtc;
1030 return 0;
1031
1032fail:
1033 tilcdc_crtc_destroy(crtc);
1034 return ret;
1035}
1/*
2 * Copyright (C) 2012 Texas Instruments
3 * Author: Rob Clark <robdclark@gmail.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18#include "drm_flip_work.h"
19
20#include "tilcdc_drv.h"
21#include "tilcdc_regs.h"
22
23struct tilcdc_crtc {
24 struct drm_crtc base;
25
26 const struct tilcdc_panel_info *info;
27 uint32_t dirty;
28 dma_addr_t start, end;
29 struct drm_pending_vblank_event *event;
30 int dpms;
31 wait_queue_head_t frame_done_wq;
32 bool frame_done;
33
34 /* fb currently set to scanout 0/1: */
35 struct drm_framebuffer *scanout[2];
36
37 /* for deferred fb unref's: */
38 struct drm_flip_work unref_work;
39};
40#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
41
42static void unref_worker(struct drm_flip_work *work, void *val)
43{
44 struct tilcdc_crtc *tilcdc_crtc =
45 container_of(work, struct tilcdc_crtc, unref_work);
46 struct drm_device *dev = tilcdc_crtc->base.dev;
47
48 mutex_lock(&dev->mode_config.mutex);
49 drm_framebuffer_unreference(val);
50 mutex_unlock(&dev->mode_config.mutex);
51}
52
53static void set_scanout(struct drm_crtc *crtc, int n)
54{
55 static const uint32_t base_reg[] = {
56 LCDC_DMA_FB_BASE_ADDR_0_REG,
57 LCDC_DMA_FB_BASE_ADDR_1_REG,
58 };
59 static const uint32_t ceil_reg[] = {
60 LCDC_DMA_FB_CEILING_ADDR_0_REG,
61 LCDC_DMA_FB_CEILING_ADDR_1_REG,
62 };
63 static const uint32_t stat[] = {
64 LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1,
65 };
66 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
67 struct drm_device *dev = crtc->dev;
68 struct tilcdc_drm_private *priv = dev->dev_private;
69
70 pm_runtime_get_sync(dev->dev);
71 tilcdc_write(dev, base_reg[n], tilcdc_crtc->start);
72 tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end);
73 if (tilcdc_crtc->scanout[n]) {
74 drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]);
75 drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
76 }
77 tilcdc_crtc->scanout[n] = crtc->primary->fb;
78 drm_framebuffer_reference(tilcdc_crtc->scanout[n]);
79 tilcdc_crtc->dirty &= ~stat[n];
80 pm_runtime_put_sync(dev->dev);
81}
82
83static void update_scanout(struct drm_crtc *crtc)
84{
85 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
86 struct drm_device *dev = crtc->dev;
87 struct drm_framebuffer *fb = crtc->primary->fb;
88 struct drm_gem_cma_object *gem;
89 unsigned int depth, bpp;
90
91 drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
92 gem = drm_fb_cma_get_gem_obj(fb, 0);
93
94 tilcdc_crtc->start = gem->paddr + fb->offsets[0] +
95 (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
96
97 tilcdc_crtc->end = tilcdc_crtc->start +
98 (crtc->mode.vdisplay * fb->pitches[0]);
99
100 if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) {
101 /* already enabled, so just mark the frames that need
102 * updating and they will be updated on vblank:
103 */
104 tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1;
105 drm_vblank_get(dev, 0);
106 } else {
107 /* not enabled yet, so update registers immediately: */
108 set_scanout(crtc, 0);
109 set_scanout(crtc, 1);
110 }
111}
112
113static void start(struct drm_crtc *crtc)
114{
115 struct drm_device *dev = crtc->dev;
116 struct tilcdc_drm_private *priv = dev->dev_private;
117
118 if (priv->rev == 2) {
119 tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
120 msleep(1);
121 tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
122 msleep(1);
123 }
124
125 tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
126 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
127 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
128}
129
130static void stop(struct drm_crtc *crtc)
131{
132 struct drm_device *dev = crtc->dev;
133
134 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
135}
136
137static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
138{
139 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
140
141 WARN_ON(tilcdc_crtc->dpms == DRM_MODE_DPMS_ON);
142
143 drm_crtc_cleanup(crtc);
144 drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
145
146 kfree(tilcdc_crtc);
147}
148
149static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
150 struct drm_framebuffer *fb,
151 struct drm_pending_vblank_event *event,
152 uint32_t page_flip_flags)
153{
154 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
155 struct drm_device *dev = crtc->dev;
156
157 if (tilcdc_crtc->event) {
158 dev_err(dev->dev, "already pending page flip!\n");
159 return -EBUSY;
160 }
161
162 crtc->primary->fb = fb;
163 tilcdc_crtc->event = event;
164 update_scanout(crtc);
165
166 return 0;
167}
168
169static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
170{
171 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
172 struct drm_device *dev = crtc->dev;
173 struct tilcdc_drm_private *priv = dev->dev_private;
174
175 /* we really only care about on or off: */
176 if (mode != DRM_MODE_DPMS_ON)
177 mode = DRM_MODE_DPMS_OFF;
178
179 if (tilcdc_crtc->dpms == mode)
180 return;
181
182 tilcdc_crtc->dpms = mode;
183
184 pm_runtime_get_sync(dev->dev);
185
186 if (mode == DRM_MODE_DPMS_ON) {
187 pm_runtime_forbid(dev->dev);
188 start(crtc);
189 } else {
190 tilcdc_crtc->frame_done = false;
191 stop(crtc);
192
193 /*
194 * if necessary wait for framedone irq which will still come
195 * before putting things to sleep..
196 */
197 if (priv->rev == 2) {
198 int ret = wait_event_timeout(
199 tilcdc_crtc->frame_done_wq,
200 tilcdc_crtc->frame_done,
201 msecs_to_jiffies(50));
202 if (ret == 0)
203 dev_err(dev->dev, "timeout waiting for framedone\n");
204 }
205 pm_runtime_allow(dev->dev);
206 }
207
208 pm_runtime_put_sync(dev->dev);
209}
210
211static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
212 const struct drm_display_mode *mode,
213 struct drm_display_mode *adjusted_mode)
214{
215 return true;
216}
217
218static void tilcdc_crtc_prepare(struct drm_crtc *crtc)
219{
220 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
221}
222
223static void tilcdc_crtc_commit(struct drm_crtc *crtc)
224{
225 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
226}
227
228static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
229 struct drm_display_mode *mode,
230 struct drm_display_mode *adjusted_mode,
231 int x, int y,
232 struct drm_framebuffer *old_fb)
233{
234 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
235 struct drm_device *dev = crtc->dev;
236 struct tilcdc_drm_private *priv = dev->dev_private;
237 const struct tilcdc_panel_info *info = tilcdc_crtc->info;
238 uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
239 int ret;
240
241 ret = tilcdc_crtc_mode_valid(crtc, mode);
242 if (WARN_ON(ret))
243 return ret;
244
245 if (WARN_ON(!info))
246 return -EINVAL;
247
248 pm_runtime_get_sync(dev->dev);
249
250 /* Configure the Burst Size and fifo threshold of DMA: */
251 reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
252 switch (info->dma_burst_sz) {
253 case 1:
254 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
255 break;
256 case 2:
257 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
258 break;
259 case 4:
260 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
261 break;
262 case 8:
263 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
264 break;
265 case 16:
266 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
267 break;
268 default:
269 return -EINVAL;
270 }
271 reg |= (info->fifo_th << 8);
272 tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
273
274 /* Configure timings: */
275 hbp = mode->htotal - mode->hsync_end;
276 hfp = mode->hsync_start - mode->hdisplay;
277 hsw = mode->hsync_end - mode->hsync_start;
278 vbp = mode->vtotal - mode->vsync_end;
279 vfp = mode->vsync_start - mode->vdisplay;
280 vsw = mode->vsync_end - mode->vsync_start;
281
282 DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
283 mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
284
285 /* Configure the AC Bias Period and Number of Transitions per Interrupt: */
286 reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
287 reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
288 LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
289
290 /*
291 * subtract one from hfp, hbp, hsw because the hardware uses
292 * a value of 0 as 1
293 */
294 if (priv->rev == 2) {
295 /* clear bits we're going to set */
296 reg &= ~0x78000033;
297 reg |= ((hfp-1) & 0x300) >> 8;
298 reg |= ((hbp-1) & 0x300) >> 4;
299 reg |= ((hsw-1) & 0x3c0) << 21;
300 }
301 tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
302
303 reg = (((mode->hdisplay >> 4) - 1) << 4) |
304 (((hbp-1) & 0xff) << 24) |
305 (((hfp-1) & 0xff) << 16) |
306 (((hsw-1) & 0x3f) << 10);
307 if (priv->rev == 2)
308 reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
309 tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
310
311 reg = ((mode->vdisplay - 1) & 0x3ff) |
312 ((vbp & 0xff) << 24) |
313 ((vfp & 0xff) << 16) |
314 (((vsw-1) & 0x3f) << 10);
315 tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
316
317 /*
318 * be sure to set Bit 10 for the V2 LCDC controller,
319 * otherwise limited to 1024 pixels width, stopping
320 * 1920x1080 being suppoted.
321 */
322 if (priv->rev == 2) {
323 if ((mode->vdisplay - 1) & 0x400) {
324 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
325 LCDC_LPP_B10);
326 } else {
327 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
328 LCDC_LPP_B10);
329 }
330 }
331
332 /* Configure display type: */
333 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
334 ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
335 LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000);
336 reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
337 if (info->tft_alt_mode)
338 reg |= LCDC_TFT_ALT_ENABLE;
339 if (priv->rev == 2) {
340 unsigned int depth, bpp;
341
342 drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
343 switch (bpp) {
344 case 16:
345 break;
346 case 32:
347 reg |= LCDC_V2_TFT_24BPP_UNPACK;
348 /* fallthrough */
349 case 24:
350 reg |= LCDC_V2_TFT_24BPP_MODE;
351 break;
352 default:
353 dev_err(dev->dev, "invalid pixel format\n");
354 return -EINVAL;
355 }
356 }
357 reg |= info->fdd < 12;
358 tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
359
360 if (info->invert_pxl_clk)
361 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
362 else
363 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
364
365 if (info->sync_ctrl)
366 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
367 else
368 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
369
370 if (info->sync_edge)
371 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
372 else
373 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
374
375 /*
376 * use value from adjusted_mode here as this might have been
377 * changed as part of the fixup for slave encoders to solve the
378 * issue where tilcdc timings are not VESA compliant
379 */
380 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
381 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
382 else
383 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
384
385 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
386 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
387 else
388 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
389
390 if (info->raster_order)
391 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
392 else
393 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
394
395
396 update_scanout(crtc);
397 tilcdc_crtc_update_clk(crtc);
398
399 pm_runtime_put_sync(dev->dev);
400
401 return 0;
402}
403
404static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
405 struct drm_framebuffer *old_fb)
406{
407 update_scanout(crtc);
408 return 0;
409}
410
411static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
412 .destroy = tilcdc_crtc_destroy,
413 .set_config = drm_crtc_helper_set_config,
414 .page_flip = tilcdc_crtc_page_flip,
415};
416
417static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
418 .dpms = tilcdc_crtc_dpms,
419 .mode_fixup = tilcdc_crtc_mode_fixup,
420 .prepare = tilcdc_crtc_prepare,
421 .commit = tilcdc_crtc_commit,
422 .mode_set = tilcdc_crtc_mode_set,
423 .mode_set_base = tilcdc_crtc_mode_set_base,
424};
425
426int tilcdc_crtc_max_width(struct drm_crtc *crtc)
427{
428 struct drm_device *dev = crtc->dev;
429 struct tilcdc_drm_private *priv = dev->dev_private;
430 int max_width = 0;
431
432 if (priv->rev == 1)
433 max_width = 1024;
434 else if (priv->rev == 2)
435 max_width = 2048;
436
437 return max_width;
438}
439
440int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
441{
442 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
443 unsigned int bandwidth;
444 uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
445
446 /*
447 * check to see if the width is within the range that
448 * the LCD Controller physically supports
449 */
450 if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
451 return MODE_VIRTUAL_X;
452
453 /* width must be multiple of 16 */
454 if (mode->hdisplay & 0xf)
455 return MODE_VIRTUAL_X;
456
457 if (mode->vdisplay > 2048)
458 return MODE_VIRTUAL_Y;
459
460 DBG("Processing mode %dx%d@%d with pixel clock %d",
461 mode->hdisplay, mode->vdisplay,
462 drm_mode_vrefresh(mode), mode->clock);
463
464 hbp = mode->htotal - mode->hsync_end;
465 hfp = mode->hsync_start - mode->hdisplay;
466 hsw = mode->hsync_end - mode->hsync_start;
467 vbp = mode->vtotal - mode->vsync_end;
468 vfp = mode->vsync_start - mode->vdisplay;
469 vsw = mode->vsync_end - mode->vsync_start;
470
471 if ((hbp-1) & ~0x3ff) {
472 DBG("Pruning mode: Horizontal Back Porch out of range");
473 return MODE_HBLANK_WIDE;
474 }
475
476 if ((hfp-1) & ~0x3ff) {
477 DBG("Pruning mode: Horizontal Front Porch out of range");
478 return MODE_HBLANK_WIDE;
479 }
480
481 if ((hsw-1) & ~0x3ff) {
482 DBG("Pruning mode: Horizontal Sync Width out of range");
483 return MODE_HSYNC_WIDE;
484 }
485
486 if (vbp & ~0xff) {
487 DBG("Pruning mode: Vertical Back Porch out of range");
488 return MODE_VBLANK_WIDE;
489 }
490
491 if (vfp & ~0xff) {
492 DBG("Pruning mode: Vertical Front Porch out of range");
493 return MODE_VBLANK_WIDE;
494 }
495
496 if ((vsw-1) & ~0x3f) {
497 DBG("Pruning mode: Vertical Sync Width out of range");
498 return MODE_VSYNC_WIDE;
499 }
500
501 /*
502 * some devices have a maximum allowed pixel clock
503 * configured from the DT
504 */
505 if (mode->clock > priv->max_pixelclock) {
506 DBG("Pruning mode: pixel clock too high");
507 return MODE_CLOCK_HIGH;
508 }
509
510 /*
511 * some devices further limit the max horizontal resolution
512 * configured from the DT
513 */
514 if (mode->hdisplay > priv->max_width)
515 return MODE_BAD_WIDTH;
516
517 /* filter out modes that would require too much memory bandwidth: */
518 bandwidth = mode->hdisplay * mode->vdisplay *
519 drm_mode_vrefresh(mode);
520 if (bandwidth > priv->max_bandwidth) {
521 DBG("Pruning mode: exceeds defined bandwidth limit");
522 return MODE_BAD;
523 }
524
525 return MODE_OK;
526}
527
528void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
529 const struct tilcdc_panel_info *info)
530{
531 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
532 tilcdc_crtc->info = info;
533}
534
535void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
536{
537 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
538 struct drm_device *dev = crtc->dev;
539 struct tilcdc_drm_private *priv = dev->dev_private;
540 int dpms = tilcdc_crtc->dpms;
541 unsigned int lcd_clk, div;
542 int ret;
543
544 pm_runtime_get_sync(dev->dev);
545
546 if (dpms == DRM_MODE_DPMS_ON)
547 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
548
549 /* in raster mode, minimum divisor is 2: */
550 ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2);
551 if (ret) {
552 dev_err(dev->dev, "failed to set display clock rate to: %d\n",
553 crtc->mode.clock);
554 goto out;
555 }
556
557 lcd_clk = clk_get_rate(priv->clk);
558 div = lcd_clk / (crtc->mode.clock * 1000);
559
560 DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div);
561 DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk));
562
563 /* Configure the LCD clock divisor. */
564 tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) |
565 LCDC_RASTER_MODE);
566
567 if (priv->rev == 2)
568 tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
569 LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
570 LCDC_V2_CORE_CLK_EN);
571
572 if (dpms == DRM_MODE_DPMS_ON)
573 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
574
575out:
576 pm_runtime_put_sync(dev->dev);
577}
578
579irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
580{
581 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
582 struct drm_device *dev = crtc->dev;
583 struct tilcdc_drm_private *priv = dev->dev_private;
584 uint32_t stat = tilcdc_read_irqstatus(dev);
585
586 if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) {
587 stop(crtc);
588 dev_err(dev->dev, "error: %08x\n", stat);
589 tilcdc_clear_irqstatus(dev, stat);
590 start(crtc);
591 } else if (stat & LCDC_PL_LOAD_DONE) {
592 tilcdc_clear_irqstatus(dev, stat);
593 } else {
594 struct drm_pending_vblank_event *event;
595 unsigned long flags;
596 uint32_t dirty = tilcdc_crtc->dirty & stat;
597
598 tilcdc_clear_irqstatus(dev, stat);
599
600 if (dirty & LCDC_END_OF_FRAME0)
601 set_scanout(crtc, 0);
602
603 if (dirty & LCDC_END_OF_FRAME1)
604 set_scanout(crtc, 1);
605
606 drm_handle_vblank(dev, 0);
607
608 spin_lock_irqsave(&dev->event_lock, flags);
609 event = tilcdc_crtc->event;
610 tilcdc_crtc->event = NULL;
611 if (event)
612 drm_send_vblank_event(dev, 0, event);
613 spin_unlock_irqrestore(&dev->event_lock, flags);
614
615 if (dirty && !tilcdc_crtc->dirty)
616 drm_vblank_put(dev, 0);
617 }
618
619 if (priv->rev == 2) {
620 if (stat & LCDC_FRAME_DONE) {
621 tilcdc_crtc->frame_done = true;
622 wake_up(&tilcdc_crtc->frame_done_wq);
623 }
624 tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
625 }
626
627 return IRQ_HANDLED;
628}
629
630void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
631{
632 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
633 struct drm_pending_vblank_event *event;
634 struct drm_device *dev = crtc->dev;
635 unsigned long flags;
636
637 /* Destroy the pending vertical blanking event associated with the
638 * pending page flip, if any, and disable vertical blanking interrupts.
639 */
640 spin_lock_irqsave(&dev->event_lock, flags);
641 event = tilcdc_crtc->event;
642 if (event && event->base.file_priv == file) {
643 tilcdc_crtc->event = NULL;
644 event->base.destroy(&event->base);
645 drm_vblank_put(dev, 0);
646 }
647 spin_unlock_irqrestore(&dev->event_lock, flags);
648}
649
650struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
651{
652 struct tilcdc_crtc *tilcdc_crtc;
653 struct drm_crtc *crtc;
654 int ret;
655
656 tilcdc_crtc = kzalloc(sizeof(*tilcdc_crtc), GFP_KERNEL);
657 if (!tilcdc_crtc) {
658 dev_err(dev->dev, "allocation failed\n");
659 return NULL;
660 }
661
662 crtc = &tilcdc_crtc->base;
663
664 tilcdc_crtc->dpms = DRM_MODE_DPMS_OFF;
665 init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
666
667 ret = drm_flip_work_init(&tilcdc_crtc->unref_work, 16,
668 "unref", unref_worker);
669 if (ret) {
670 dev_err(dev->dev, "could not allocate unref FIFO\n");
671 goto fail;
672 }
673
674 ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs);
675 if (ret < 0)
676 goto fail;
677
678 drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
679
680 return crtc;
681
682fail:
683 tilcdc_crtc_destroy(crtc);
684 return NULL;
685}