Linux Audio

Check our new training course

Loading...
v5.4
  1/*
  2 * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
  3 *
  4 * Copyright 2010 PMC-Sierra, Inc.
  5 *
  6 *  This program is free software; you can redistribute  it and/or modify it
  7 *  under  the terms of  the GNU General  Public License as published by the
  8 *  Free Software Foundation;  either version 2 of the  License, or (at your
  9 *  option) any later version.
 10 *
 11 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 12 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 13 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 14 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 15 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 16 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 17 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 18 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 19 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 20 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 21 *
 22 *  You should have received a copy of the  GNU General Public License along
 23 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 24 *  675 Mass Ave, Cambridge, MA 02139, USA.
 25 */
 26
 27#include <linux/init.h>
 28#include <linux/kernel.h>
 29#include <linux/ioport.h>
 30#include <linux/platform_device.h>
 31#include <linux/delay.h>
 32#include <msp_regs.h>
 33#include <msp_int.h>
 34#include <msp_gpio_macros.h>
 35
 36
 37#define MSP_ETHERNET_GPIO0	14
 38#define MSP_ETHERNET_GPIO1	15
 39#define MSP_ETHERNET_GPIO2	16
 40
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 41#define MSP_ETH_ID	"pmc_mspeth"
 42#define MSP_ETH_SIZE	0xE0
 43static struct resource msp_eth0_resources[] = {
 44	[0] = {
 45		.start	= MSP_MAC0_BASE,
 46		.end	= MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
 47		.flags	= IORESOURCE_MEM,
 48	},
 49	[1] = {
 50		.start	= MSP_INT_MAC0,
 51		.end	= MSP_INT_MAC0,
 52		.flags	= IORESOURCE_IRQ,
 53	},
 54};
 55
 56static struct resource msp_eth1_resources[] = {
 57	[0] = {
 58		.start	= MSP_MAC1_BASE,
 59		.end	= MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
 60		.flags	= IORESOURCE_MEM,
 61	},
 62	[1] = {
 63		.start	= MSP_INT_MAC1,
 64		.end	= MSP_INT_MAC1,
 65		.flags	= IORESOURCE_IRQ,
 66	},
 67};
 68
 69
 70
 71static struct platform_device mspeth_device[] = {
 72	[0] = {
 73		.name	= MSP_ETH_ID,
 74		.id	= 0,
 75		.num_resources = ARRAY_SIZE(msp_eth0_resources),
 76		.resource = msp_eth0_resources,
 77	},
 78	[1] = {
 79		.name	= MSP_ETH_ID,
 80		.id	= 1,
 81		.num_resources = ARRAY_SIZE(msp_eth1_resources),
 82		.resource = msp_eth1_resources,
 83	},
 84
 85};
 86#define msp_eth_devs	mspeth_device
 87
 
 88int __init msp_eth_setup(void)
 89{
 90	int i, ret = 0;
 91
 92	/* Configure the GPIO and take the ethernet PHY out of reset */
 93	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
 94	msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
 95
 
 
 
 
 
 
 
 
 96	for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
 97		ret = platform_device_register(&msp_eth_devs[i]);
 98		printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
 99		if (ret) {
100			platform_device_unregister(&msp_eth_devs[i]);
101			break;
102		}
103	}
104
105	if (ret)
106		printk(KERN_WARNING "Could not initialize "
107						"MSPETH device structures.\n");
108
109	return ret;
110}
111subsys_initcall(msp_eth_setup);
v3.15
  1/*
  2 * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
  3 *
  4 * Copyright 2010 PMC-Sierra, Inc.
  5 *
  6 *  This program is free software; you can redistribute  it and/or modify it
  7 *  under  the terms of  the GNU General  Public License as published by the
  8 *  Free Software Foundation;  either version 2 of the  License, or (at your
  9 *  option) any later version.
 10 *
 11 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 12 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 13 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 14 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 15 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 16 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 17 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 18 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 19 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 20 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 21 *
 22 *  You should have received a copy of the  GNU General Public License along
 23 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 24 *  675 Mass Ave, Cambridge, MA 02139, USA.
 25 */
 26
 27#include <linux/init.h>
 28#include <linux/kernel.h>
 29#include <linux/ioport.h>
 30#include <linux/platform_device.h>
 31#include <linux/delay.h>
 32#include <msp_regs.h>
 33#include <msp_int.h>
 34#include <msp_gpio_macros.h>
 35
 36
 37#define MSP_ETHERNET_GPIO0	14
 38#define MSP_ETHERNET_GPIO1	15
 39#define MSP_ETHERNET_GPIO2	16
 40
 41#ifdef CONFIG_MSP_HAS_TSMAC
 42#define MSP_TSMAC_SIZE	0x10020
 43#define MSP_TSMAC_ID	"pmc_tsmac"
 44
 45static struct resource msp_tsmac0_resources[] = {
 46	[0] = {
 47		.start	= MSP_MAC0_BASE,
 48		.end	= MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1,
 49		.flags	= IORESOURCE_MEM,
 50	},
 51	[1] = {
 52		.start	= MSP_INT_MAC0,
 53		.end	= MSP_INT_MAC0,
 54		.flags	= IORESOURCE_IRQ,
 55	},
 56};
 57
 58static struct resource msp_tsmac1_resources[] = {
 59	[0] = {
 60		.start	= MSP_MAC1_BASE,
 61		.end	= MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1,
 62		.flags	= IORESOURCE_MEM,
 63	},
 64	[1] = {
 65		.start	= MSP_INT_MAC1,
 66		.end	= MSP_INT_MAC1,
 67		.flags	= IORESOURCE_IRQ,
 68	},
 69};
 70static struct resource msp_tsmac2_resources[] = {
 71	[0] = {
 72		.start	= MSP_MAC2_BASE,
 73		.end	= MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1,
 74		.flags	= IORESOURCE_MEM,
 75	},
 76	[1] = {
 77		.start	= MSP_INT_SAR,
 78		.end	= MSP_INT_SAR,
 79		.flags	= IORESOURCE_IRQ,
 80	},
 81};
 82
 83
 84static struct platform_device tsmac_device[] = {
 85	[0] = {
 86		.name	= MSP_TSMAC_ID,
 87		.id	= 0,
 88		.num_resources = ARRAY_SIZE(msp_tsmac0_resources),
 89		.resource = msp_tsmac0_resources,
 90	},
 91	[1] = {
 92		.name	= MSP_TSMAC_ID,
 93		.id	= 1,
 94		.num_resources = ARRAY_SIZE(msp_tsmac1_resources),
 95		.resource = msp_tsmac1_resources,
 96	},
 97	[2] = {
 98		.name	= MSP_TSMAC_ID,
 99		.id	= 2,
100		.num_resources = ARRAY_SIZE(msp_tsmac2_resources),
101		.resource = msp_tsmac2_resources,
102	},
103};
104#define msp_eth_devs	tsmac_device
105
106#else
107/* If it is not TSMAC assume MSP_ETH (100Mbps) */
108#define MSP_ETH_ID	"pmc_mspeth"
109#define MSP_ETH_SIZE	0xE0
110static struct resource msp_eth0_resources[] = {
111	[0] = {
112		.start	= MSP_MAC0_BASE,
113		.end	= MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
114		.flags	= IORESOURCE_MEM,
115	},
116	[1] = {
117		.start	= MSP_INT_MAC0,
118		.end	= MSP_INT_MAC0,
119		.flags	= IORESOURCE_IRQ,
120	},
121};
122
123static struct resource msp_eth1_resources[] = {
124	[0] = {
125		.start	= MSP_MAC1_BASE,
126		.end	= MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
127		.flags	= IORESOURCE_MEM,
128	},
129	[1] = {
130		.start	= MSP_INT_MAC1,
131		.end	= MSP_INT_MAC1,
132		.flags	= IORESOURCE_IRQ,
133	},
134};
135
136
137
138static struct platform_device mspeth_device[] = {
139	[0] = {
140		.name	= MSP_ETH_ID,
141		.id	= 0,
142		.num_resources = ARRAY_SIZE(msp_eth0_resources),
143		.resource = msp_eth0_resources,
144	},
145	[1] = {
146		.name	= MSP_ETH_ID,
147		.id	= 1,
148		.num_resources = ARRAY_SIZE(msp_eth1_resources),
149		.resource = msp_eth1_resources,
150	},
151
152};
153#define msp_eth_devs	mspeth_device
154
155#endif
156int __init msp_eth_setup(void)
157{
158	int i, ret = 0;
159
160	/* Configure the GPIO and take the ethernet PHY out of reset */
161	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
162	msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
163
164#ifdef CONFIG_MSP_HAS_TSMAC
165	/* 3 phys on boards with TSMAC */
166	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1);
167	msp_gpio_pin_hi(MSP_ETHERNET_GPIO1);
168
169	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2);
170	msp_gpio_pin_hi(MSP_ETHERNET_GPIO2);
171#endif
172	for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
173		ret = platform_device_register(&msp_eth_devs[i]);
174		printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
175		if (ret) {
176			platform_device_unregister(&msp_eth_devs[i]);
177			break;
178		}
179	}
180
181	if (ret)
182		printk(KERN_WARNING "Could not initialize "
183						"MSPETH device structures.\n");
184
185	return ret;
186}
187subsys_initcall(msp_eth_setup);