Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6/dts-v1/;
7#include <dt-bindings/gpio/gpio.h>
8#include "imx6q.dtsi"
9
10/ {
11 model = "Gateworks Ventana GW5400-A";
12 compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
13
14 /* these are used by bootloader for disabling nodes */
15 aliases {
16 i2c0 = &i2c1;
17 i2c1 = &i2c2;
18 i2c2 = &i2c3;
19 led0 = &led0;
20 led1 = &led1;
21 led2 = &led2;
22 ssi0 = &ssi1;
23 spi0 = &ecspi1;
24 usb0 = &usbh1;
25 usb1 = &usbotg;
26 };
27
28 chosen {
29 bootargs = "console=ttymxc1,115200";
30 };
31
32 leds {
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_gpio_leds>;
36
37 led0: user1 {
38 label = "user1";
39 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
40 default-state = "on";
41 linux,default-trigger = "heartbeat";
42 };
43
44 led1: user2 {
45 label = "user2";
46 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
47 default-state = "off";
48 };
49
50 led2: user3 {
51 label = "user3";
52 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
53 default-state = "off";
54 };
55 };
56
57 memory@10000000 {
58 device_type = "memory";
59 reg = <0x10000000 0x40000000>;
60 };
61
62 pps {
63 compatible = "pps-gpio";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_gpio_leds>;
66 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
67 status = "okay";
68 };
69
70 regulators {
71 compatible = "simple-bus";
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 reg_1p0v: regulator@0 {
76 compatible = "regulator-fixed";
77 reg = <0>;
78 regulator-name = "1P0V";
79 regulator-min-microvolt = <1000000>;
80 regulator-max-microvolt = <1000000>;
81 regulator-always-on;
82 };
83
84 reg_3p3v: regulator@1 {
85 compatible = "regulator-fixed";
86 reg = <1>;
87 regulator-name = "3P3V";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
90 regulator-always-on;
91 };
92
93 reg_usb_h1_vbus: regulator@2 {
94 compatible = "regulator-fixed";
95 reg = <2>;
96 regulator-name = "usb_h1_vbus";
97 regulator-min-microvolt = <5000000>;
98 regulator-max-microvolt = <5000000>;
99 regulator-always-on;
100 };
101
102 reg_usb_otg_vbus: regulator@3 {
103 compatible = "regulator-fixed";
104 reg = <3>;
105 regulator-name = "usb_otg_vbus";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
108 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
109 enable-active-high;
110 };
111 };
112
113 sound {
114 compatible = "fsl,imx6q-ventana-sgtl5000",
115 "fsl,imx-audio-sgtl5000";
116 model = "sgtl5000-audio";
117 ssi-controller = <&ssi1>;
118 audio-codec = <&codec>;
119 audio-routing =
120 "MIC_IN", "Mic Jack",
121 "Mic Jack", "Mic Bias",
122 "Headphone Jack", "HP_OUT";
123 mux-int-port = <1>;
124 mux-ext-port = <4>;
125 };
126};
127
128&audmux {
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_audmux>;
131 status = "okay";
132};
133
134&ecspi1 {
135 cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_ecspi1>;
138 status = "okay";
139
140 flash: m25p80@0 {
141 compatible = "sst,w25q256", "jedec,spi-nor";
142 spi-max-frequency = <30000000>;
143 reg = <0>;
144 };
145};
146
147&fec {
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_enet>;
150 phy-mode = "rgmii-id";
151 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
152 status = "okay";
153};
154
155&hdmi {
156 ddc-i2c-bus = <&i2c3>;
157 status = "okay";
158};
159
160&i2c1 {
161 clock-frequency = <100000>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_i2c1>;
164 status = "okay";
165
166 eeprom1: eeprom@50 {
167 compatible = "atmel,24c02";
168 reg = <0x50>;
169 pagesize = <16>;
170 };
171
172 eeprom2: eeprom@51 {
173 compatible = "atmel,24c02";
174 reg = <0x51>;
175 pagesize = <16>;
176 };
177
178 eeprom3: eeprom@52 {
179 compatible = "atmel,24c02";
180 reg = <0x52>;
181 pagesize = <16>;
182 };
183
184 eeprom4: eeprom@53 {
185 compatible = "atmel,24c02";
186 reg = <0x53>;
187 pagesize = <16>;
188 };
189
190 gpio: pca9555@23 {
191 compatible = "nxp,pca9555";
192 reg = <0x23>;
193 gpio-controller;
194 #gpio-cells = <2>;
195 };
196
197 rtc: ds1672@68 {
198 compatible = "dallas,ds1672";
199 reg = <0x68>;
200 };
201};
202
203&i2c2 {
204 clock-frequency = <100000>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_i2c2>;
207 status = "okay";
208
209 pmic: pfuze100@8 {
210 compatible = "fsl,pfuze100";
211 reg = <0x08>;
212
213 regulators {
214 sw1a_reg: sw1ab {
215 regulator-min-microvolt = <300000>;
216 regulator-max-microvolt = <1875000>;
217 regulator-boot-on;
218 regulator-always-on;
219 regulator-ramp-delay = <6250>;
220 };
221
222 sw1c_reg: sw1c {
223 regulator-min-microvolt = <300000>;
224 regulator-max-microvolt = <1875000>;
225 regulator-boot-on;
226 regulator-always-on;
227 regulator-ramp-delay = <6250>;
228 };
229
230 sw2_reg: sw2 {
231 regulator-min-microvolt = <800000>;
232 regulator-max-microvolt = <3950000>;
233 regulator-boot-on;
234 regulator-always-on;
235 };
236
237 sw3a_reg: sw3a {
238 regulator-min-microvolt = <400000>;
239 regulator-max-microvolt = <1975000>;
240 regulator-boot-on;
241 regulator-always-on;
242 };
243
244 sw3b_reg: sw3b {
245 regulator-min-microvolt = <400000>;
246 regulator-max-microvolt = <1975000>;
247 regulator-boot-on;
248 regulator-always-on;
249 };
250
251 sw4_reg: sw4 {
252 regulator-min-microvolt = <800000>;
253 regulator-max-microvolt = <3300000>;
254 };
255
256 swbst_reg: swbst {
257 regulator-min-microvolt = <5000000>;
258 regulator-max-microvolt = <5150000>;
259 };
260
261 snvs_reg: vsnvs {
262 regulator-min-microvolt = <1000000>;
263 regulator-max-microvolt = <3000000>;
264 regulator-boot-on;
265 regulator-always-on;
266 };
267
268 vref_reg: vrefddr {
269 regulator-boot-on;
270 regulator-always-on;
271 };
272
273 vgen1_reg: vgen1 {
274 regulator-min-microvolt = <800000>;
275 regulator-max-microvolt = <1550000>;
276 };
277
278 vgen2_reg: vgen2 {
279 regulator-min-microvolt = <800000>;
280 regulator-max-microvolt = <1550000>;
281 };
282
283 vgen3_reg: vgen3 {
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <3300000>;
286 };
287
288 vgen4_reg: vgen4 {
289 regulator-min-microvolt = <1800000>;
290 regulator-max-microvolt = <3300000>;
291 regulator-always-on;
292 };
293
294 vgen5_reg: vgen5 {
295 regulator-min-microvolt = <1800000>;
296 regulator-max-microvolt = <3300000>;
297 regulator-always-on;
298 };
299
300 vgen6_reg: vgen6 {
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <3300000>;
303 regulator-always-on;
304 };
305 };
306 };
307};
308
309&i2c3 {
310 clock-frequency = <100000>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_i2c3>;
313 status = "okay";
314
315 accelerometer: mma8450@1c {
316 compatible = "fsl,mma8450";
317 reg = <0x1c>;
318 };
319
320 codec: sgtl5000@a {
321 compatible = "fsl,sgtl5000";
322 reg = <0x0a>;
323 clocks = <&clks IMX6QDL_CLK_CKO>;
324 VDDA-supply = <&sw4_reg>;
325 VDDIO-supply = <®_3p3v>;
326 };
327
328 touchscreen: egalax_ts@4 {
329 compatible = "eeti,egalax_ts";
330 reg = <0x04>;
331 interrupt-parent = <&gpio7>;
332 interrupts = <12 2>;
333 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
334 };
335};
336
337&ldb {
338 status = "okay";
339};
340
341&pcie {
342 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
343 status = "okay";
344};
345
346&ssi1 {
347 status = "okay";
348};
349
350&uart1 {
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart1>;
353 status = "okay";
354};
355
356&uart2 {
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart2>;
359 status = "okay";
360};
361
362&uart5 {
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_uart5>;
365 status = "okay";
366};
367
368&usbotg {
369 vbus-supply = <®_usb_otg_vbus>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&pinctrl_usbotg>;
372 disable-over-current;
373 status = "okay";
374};
375
376&usbh1 {
377 vbus-supply = <®_usb_h1_vbus>;
378 status = "okay";
379};
380
381&usdhc3 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usdhc3>;
384 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
385 vmmc-supply = <®_3p3v>;
386 status = "okay";
387};
388
389&iomuxc {
390 pinctrl_audmux: audmuxgrp {
391 fsl,pins = <
392 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
393 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
394 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
395 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
396 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
397 >;
398 };
399
400 pinctrl_ecspi1: ecspi1grp {
401 fsl,pins = <
402 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
403 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
404 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
405 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
406 >;
407 };
408
409 pinctrl_enet: enetgrp {
410 fsl,pins = <
411 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
412 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
413 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
414 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
415 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
416 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
417 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
418 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
419 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
420 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
421 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
422 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
423 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
424 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
425 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
426 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
427 >;
428 };
429
430 pinctrl_gpio_leds: gpioledsgrp {
431 fsl,pins = <
432 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
433 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
434 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
435 >;
436 };
437
438 pinctrl_i2c1: i2c1grp {
439 fsl,pins = <
440 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
441 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
442 >;
443 };
444
445 pinctrl_i2c2: i2c2grp {
446 fsl,pins = <
447 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
448 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
449 >;
450 };
451
452 pinctrl_i2c3: i2c3grp {
453 fsl,pins = <
454 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
455 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
456 >;
457 };
458
459 pinctrl_pcie: pciegrp {
460 fsl,pins = <
461 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
462 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
463 >;
464 };
465
466 pinctrl_pps: ppsgrp {
467 fsl,pins = <
468 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
469 >;
470 };
471
472 pinctrl_uart1: uart1grp {
473 fsl,pins = <
474 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
475 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
476 >;
477 };
478
479 pinctrl_uart2: uart2grp {
480 fsl,pins = <
481 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
482 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
483 >;
484 };
485
486 pinctrl_uart5: uart5grp {
487 fsl,pins = <
488 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
489 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
490 >;
491 };
492
493 pinctrl_usbotg: usbotggrp {
494 fsl,pins = <
495 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
496 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
497 >;
498 };
499
500 pinctrl_usdhc3: usdhc3grp {
501 fsl,pins = <
502 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
503 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
504 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
505 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
506 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
507 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
508 >;
509 };
510};
1/*
2 * Copyright 2013 Gateworks Corporation
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13#include "imx6q.dtsi"
14
15/ {
16 model = "Gateworks Ventana GW5400-A";
17 compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
18
19 /* these are used by bootloader for disabling nodes */
20 aliases {
21 ethernet0 = &fec;
22 ethernet1 = ð1;
23 i2c0 = &i2c1;
24 i2c1 = &i2c2;
25 i2c2 = &i2c3;
26 led0 = &led0;
27 led1 = &led1;
28 led2 = &led2;
29 sky2 = ð1;
30 ssi0 = &ssi1;
31 spi0 = &ecspi1;
32 usb0 = &usbh1;
33 usb1 = &usbotg;
34 usdhc2 = &usdhc3;
35 };
36
37 chosen {
38 bootargs = "console=ttymxc1,115200";
39 };
40
41 leds {
42 compatible = "gpio-leds";
43
44 led0: user1 {
45 label = "user1";
46 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
47 default-state = "on";
48 linux,default-trigger = "heartbeat";
49 };
50
51 led1: user2 {
52 label = "user2";
53 gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
54 default-state = "off";
55 };
56
57 led2: user3 {
58 label = "user3";
59 gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
60 default-state = "off";
61 };
62 };
63
64 memory {
65 reg = <0x10000000 0x40000000>;
66 };
67
68 pps {
69 compatible = "pps-gpio";
70 gpios = <&gpio1 5 0>;
71 status = "okay";
72 };
73
74 regulators {
75 compatible = "simple-bus";
76 #address-cells = <1>;
77 #size-cells = <0>;
78
79 reg_1p0v: regulator@0 {
80 compatible = "regulator-fixed";
81 reg = <0>;
82 regulator-name = "1P0V";
83 regulator-min-microvolt = <1000000>;
84 regulator-max-microvolt = <1000000>;
85 regulator-always-on;
86 };
87
88 reg_3p3v: regulator@1 {
89 compatible = "regulator-fixed";
90 reg = <1>;
91 regulator-name = "3P3V";
92 regulator-min-microvolt = <3300000>;
93 regulator-max-microvolt = <3300000>;
94 regulator-always-on;
95 };
96
97 reg_usb_h1_vbus: regulator@2 {
98 compatible = "regulator-fixed";
99 reg = <2>;
100 regulator-name = "usb_h1_vbus";
101 regulator-min-microvolt = <5000000>;
102 regulator-max-microvolt = <5000000>;
103 regulator-always-on;
104 };
105
106 reg_usb_otg_vbus: regulator@3 {
107 compatible = "regulator-fixed";
108 reg = <3>;
109 regulator-name = "usb_otg_vbus";
110 regulator-min-microvolt = <5000000>;
111 regulator-max-microvolt = <5000000>;
112 gpio = <&gpio3 22 0>;
113 enable-active-high;
114 };
115 };
116
117 sound {
118 compatible = "fsl,imx6q-sabrelite-sgtl5000",
119 "fsl,imx-audio-sgtl5000";
120 model = "imx6q-sabrelite-sgtl5000";
121 ssi-controller = <&ssi1>;
122 audio-codec = <&codec>;
123 audio-routing =
124 "MIC_IN", "Mic Jack",
125 "Mic Jack", "Mic Bias",
126 "Headphone Jack", "HP_OUT";
127 mux-int-port = <1>;
128 mux-ext-port = <4>;
129 };
130};
131
132&audmux {
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_audmux>;
135 status = "okay";
136};
137
138&ecspi1 {
139 fsl,spi-num-chipselects = <1>;
140 cs-gpios = <&gpio3 19 0>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_ecspi1>;
143 status = "okay";
144
145 flash: m25p80@0 {
146 compatible = "sst,w25q256";
147 spi-max-frequency = <30000000>;
148 reg = <0>;
149 };
150};
151
152&fec {
153 pinctrl-names = "default";
154 pinctrl-0 = <&pinctrl_enet>;
155 phy-mode = "rgmii";
156 phy-reset-gpios = <&gpio1 30 0>;
157 status = "okay";
158};
159
160&i2c1 {
161 clock-frequency = <100000>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_i2c1>;
164 status = "okay";
165
166 eeprom1: eeprom@50 {
167 compatible = "atmel,24c02";
168 reg = <0x50>;
169 pagesize = <16>;
170 };
171
172 eeprom2: eeprom@51 {
173 compatible = "atmel,24c02";
174 reg = <0x51>;
175 pagesize = <16>;
176 };
177
178 eeprom3: eeprom@52 {
179 compatible = "atmel,24c02";
180 reg = <0x52>;
181 pagesize = <16>;
182 };
183
184 eeprom4: eeprom@53 {
185 compatible = "atmel,24c02";
186 reg = <0x53>;
187 pagesize = <16>;
188 };
189
190 gpio: pca9555@23 {
191 compatible = "nxp,pca9555";
192 reg = <0x23>;
193 gpio-controller;
194 #gpio-cells = <2>;
195 };
196
197 hwmon: gsc@29 {
198 compatible = "gw,gsp";
199 reg = <0x29>;
200 };
201
202 rtc: ds1672@68 {
203 compatible = "dallas,ds1672";
204 reg = <0x68>;
205 };
206};
207
208&i2c2 {
209 clock-frequency = <100000>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_i2c2>;
212 status = "okay";
213
214 pmic: pfuze100@08 {
215 compatible = "fsl,pfuze100";
216 reg = <0x08>;
217
218 regulators {
219 sw1a_reg: sw1ab {
220 regulator-min-microvolt = <300000>;
221 regulator-max-microvolt = <1875000>;
222 regulator-boot-on;
223 regulator-always-on;
224 regulator-ramp-delay = <6250>;
225 };
226
227 sw1c_reg: sw1c {
228 regulator-min-microvolt = <300000>;
229 regulator-max-microvolt = <1875000>;
230 regulator-boot-on;
231 regulator-always-on;
232 regulator-ramp-delay = <6250>;
233 };
234
235 sw2_reg: sw2 {
236 regulator-min-microvolt = <800000>;
237 regulator-max-microvolt = <3950000>;
238 regulator-boot-on;
239 regulator-always-on;
240 };
241
242 sw3a_reg: sw3a {
243 regulator-min-microvolt = <400000>;
244 regulator-max-microvolt = <1975000>;
245 regulator-boot-on;
246 regulator-always-on;
247 };
248
249 sw3b_reg: sw3b {
250 regulator-min-microvolt = <400000>;
251 regulator-max-microvolt = <1975000>;
252 regulator-boot-on;
253 regulator-always-on;
254 };
255
256 sw4_reg: sw4 {
257 regulator-min-microvolt = <800000>;
258 regulator-max-microvolt = <3300000>;
259 };
260
261 swbst_reg: swbst {
262 regulator-min-microvolt = <5000000>;
263 regulator-max-microvolt = <5150000>;
264 };
265
266 snvs_reg: vsnvs {
267 regulator-min-microvolt = <1000000>;
268 regulator-max-microvolt = <3000000>;
269 regulator-boot-on;
270 regulator-always-on;
271 };
272
273 vref_reg: vrefddr {
274 regulator-boot-on;
275 regulator-always-on;
276 };
277
278 vgen1_reg: vgen1 {
279 regulator-min-microvolt = <800000>;
280 regulator-max-microvolt = <1550000>;
281 };
282
283 vgen2_reg: vgen2 {
284 regulator-min-microvolt = <800000>;
285 regulator-max-microvolt = <1550000>;
286 };
287
288 vgen3_reg: vgen3 {
289 regulator-min-microvolt = <1800000>;
290 regulator-max-microvolt = <3300000>;
291 };
292
293 vgen4_reg: vgen4 {
294 regulator-min-microvolt = <1800000>;
295 regulator-max-microvolt = <3300000>;
296 regulator-always-on;
297 };
298
299 vgen5_reg: vgen5 {
300 regulator-min-microvolt = <1800000>;
301 regulator-max-microvolt = <3300000>;
302 regulator-always-on;
303 };
304
305 vgen6_reg: vgen6 {
306 regulator-min-microvolt = <1800000>;
307 regulator-max-microvolt = <3300000>;
308 regulator-always-on;
309 };
310 };
311 };
312
313 pciswitch: pex8609@3f {
314 compatible = "plx,pex8609";
315 reg = <0x3f>;
316 };
317
318 pciclkgen: si52147@6b {
319 compatible = "sil,si52147";
320 reg = <0x6b>;
321 };
322};
323
324&i2c3 {
325 clock-frequency = <100000>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_i2c3>;
328 status = "okay";
329
330 accelerometer: mma8450@1c {
331 compatible = "fsl,mma8450";
332 reg = <0x1c>;
333 };
334
335 codec: sgtl5000@0a {
336 compatible = "fsl,sgtl5000";
337 reg = <0x0a>;
338 clocks = <&clks 201>;
339 VDDA-supply = <&sw4_reg>;
340 VDDIO-supply = <®_3p3v>;
341 };
342
343 hdmiin: adv7611@4c {
344 compatible = "adi,adv7611";
345 reg = <0x4c>;
346 };
347
348 touchscreen: egalax_ts@04 {
349 compatible = "eeti,egalax_ts";
350 reg = <0x04>;
351 interrupt-parent = <&gpio7>;
352 interrupts = <12 2>; /* gpio7_12 active low */
353 wakeup-gpios = <&gpio7 12 0>;
354 };
355
356 videoout: adv7393@2a {
357 compatible = "adi,adv7393";
358 reg = <0x2a>;
359 };
360
361 videoin: adv7180@20 {
362 compatible = "adi,adv7180";
363 reg = <0x20>;
364 };
365};
366
367&iomuxc {
368 pinctrl-names = "default";
369 pinctrl-0 = <&pinctrl_hog>;
370
371 imx6q-gw5400-a {
372 pinctrl_hog: hoggrp {
373 fsl,pins = <
374 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
375 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
376 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
377 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
378 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
379 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
380 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
381 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
382 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
383 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
384 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
385 MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
386 >;
387 };
388
389 pinctrl_audmux: audmuxgrp {
390 fsl,pins = <
391 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
392 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
393 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
394 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
395 >;
396 };
397
398 pinctrl_ecspi1: ecspi1grp {
399 fsl,pins = <
400 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
401 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
402 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
403 >;
404 };
405
406 pinctrl_enet: enetgrp {
407 fsl,pins = <
408 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
409 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
410 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
411 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
412 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
413 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
414 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
415 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
416 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
417 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
418 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
419 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
420 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
421 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
422 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
423 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
424 >;
425 };
426
427 pinctrl_i2c1: i2c1grp {
428 fsl,pins = <
429 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
430 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
431 >;
432 };
433
434 pinctrl_i2c2: i2c2grp {
435 fsl,pins = <
436 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
437 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
438 >;
439 };
440
441 pinctrl_i2c3: i2c3grp {
442 fsl,pins = <
443 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
444 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
445 >;
446 };
447
448 pinctrl_uart1: uart1grp {
449 fsl,pins = <
450 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
451 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
452 >;
453 };
454
455 pinctrl_uart2: uart2grp {
456 fsl,pins = <
457 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
458 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
459 >;
460 };
461
462 pinctrl_uart5: uart5grp {
463 fsl,pins = <
464 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
465 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
466 >;
467 };
468
469 pinctrl_usbotg: usbotggrp {
470 fsl,pins = <
471 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
472 >;
473 };
474
475 pinctrl_usdhc3: usdhc3grp {
476 fsl,pins = <
477 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
478 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
479 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
480 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
481 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
482 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
483 >;
484 };
485 };
486};
487
488&ldb {
489 status = "okay";
490};
491
492&pcie {
493 reset-gpio = <&gpio1 29 0>;
494 status = "okay";
495
496 eth1: sky2@8 { /* MAC/PHY on bus 8 */
497 compatible = "marvell,sky2";
498 };
499};
500
501&ssi1 {
502 fsl,mode = "i2s-slave";
503 status = "okay";
504};
505
506&uart1 {
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_uart1>;
509 status = "okay";
510};
511
512&uart2 {
513 pinctrl-names = "default";
514 pinctrl-0 = <&pinctrl_uart2>;
515 status = "okay";
516};
517
518&uart5 {
519 pinctrl-names = "default";
520 pinctrl-0 = <&pinctrl_uart5>;
521 status = "okay";
522};
523
524&usbotg {
525 vbus-supply = <®_usb_otg_vbus>;
526 pinctrl-names = "default";
527 pinctrl-0 = <&pinctrl_usbotg>;
528 disable-over-current;
529 status = "okay";
530};
531
532&usbh1 {
533 vbus-supply = <®_usb_h1_vbus>;
534 status = "okay";
535};
536
537&usdhc3 {
538 pinctrl-names = "default";
539 pinctrl-0 = <&pinctrl_usdhc3>;
540 cd-gpios = <&gpio7 0 0>;
541 vmmc-supply = <®_3p3v>;
542 status = "okay";
543};