Loading...
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2007 by Ralf Baechle
7 * Copyright (C) 2009, 2012 Cavium, Inc.
8 */
9#include <linux/clocksource.h>
10#include <linux/sched/clock.h>
11#include <linux/export.h>
12#include <linux/init.h>
13#include <linux/smp.h>
14
15#include <asm/cpu-info.h>
16#include <asm/cpu-type.h>
17#include <asm/time.h>
18
19#include <asm/octeon/octeon.h>
20#include <asm/octeon/cvmx-ipd-defs.h>
21#include <asm/octeon/cvmx-mio-defs.h>
22#include <asm/octeon/cvmx-rst-defs.h>
23#include <asm/octeon/cvmx-fpa-defs.h>
24
25static u64 f;
26static u64 rdiv;
27static u64 sdiv;
28static u64 octeon_udelay_factor;
29static u64 octeon_ndelay_factor;
30
31void __init octeon_setup_delays(void)
32{
33 octeon_udelay_factor = octeon_get_clock_rate() / 1000000;
34 /*
35 * For __ndelay we divide by 2^16, so the factor is multiplied
36 * by the same amount.
37 */
38 octeon_ndelay_factor = (octeon_udelay_factor * 0x10000ull) / 1000ull;
39
40 preset_lpj = octeon_get_clock_rate() / HZ;
41
42 if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
43 union cvmx_mio_rst_boot rst_boot;
44
45 rst_boot.u64 = cvmx_read_csr(CVMX_MIO_RST_BOOT);
46 rdiv = rst_boot.s.c_mul; /* CPU clock */
47 sdiv = rst_boot.s.pnr_mul; /* I/O clock */
48 f = (0x8000000000000000ull / sdiv) * 2;
49 } else if (current_cpu_type() == CPU_CAVIUM_OCTEON3) {
50 union cvmx_rst_boot rst_boot;
51
52 rst_boot.u64 = cvmx_read_csr(CVMX_RST_BOOT);
53 rdiv = rst_boot.s.c_mul; /* CPU clock */
54 sdiv = rst_boot.s.pnr_mul; /* I/O clock */
55 f = (0x8000000000000000ull / sdiv) * 2;
56 }
57
58}
59
60/*
61 * Set the current core's cvmcount counter to the value of the
62 * IPD_CLK_COUNT. We do this on all cores as they are brought
63 * on-line. This allows for a read from a local cpu register to
64 * access a synchronized counter.
65 *
66 * On CPU_CAVIUM_OCTEON2 the IPD_CLK_COUNT is scaled by rdiv/sdiv.
67 */
68void octeon_init_cvmcount(void)
69{
70 u64 clk_reg;
71 unsigned long flags;
72 unsigned loops = 2;
73
74 clk_reg = octeon_has_feature(OCTEON_FEATURE_FPA3) ?
75 CVMX_FPA_CLK_COUNT : CVMX_IPD_CLK_COUNT;
76
77 /* Clobber loops so GCC will not unroll the following while loop. */
78 asm("" : "+r" (loops));
79
80 local_irq_save(flags);
81 /*
82 * Loop several times so we are executing from the cache,
83 * which should give more deterministic timing.
84 */
85 while (loops--) {
86 u64 clk_count = cvmx_read_csr(clk_reg);
87 if (rdiv != 0) {
88 clk_count *= rdiv;
89 if (f != 0) {
90 asm("dmultu\t%[cnt],%[f]\n\t"
91 "mfhi\t%[cnt]"
92 : [cnt] "+r" (clk_count)
93 : [f] "r" (f)
94 : "hi", "lo");
95 }
96 }
97 write_c0_cvmcount(clk_count);
98 }
99 local_irq_restore(flags);
100}
101
102static u64 octeon_cvmcount_read(struct clocksource *cs)
103{
104 return read_c0_cvmcount();
105}
106
107static struct clocksource clocksource_mips = {
108 .name = "OCTEON_CVMCOUNT",
109 .read = octeon_cvmcount_read,
110 .mask = CLOCKSOURCE_MASK(64),
111 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
112};
113
114unsigned long long notrace sched_clock(void)
115{
116 /* 64-bit arithmatic can overflow, so use 128-bit. */
117 u64 t1, t2, t3;
118 unsigned long long rv;
119 u64 mult = clocksource_mips.mult;
120 u64 shift = clocksource_mips.shift;
121 u64 cnt = read_c0_cvmcount();
122
123 asm (
124 "dmultu\t%[cnt],%[mult]\n\t"
125 "nor\t%[t1],$0,%[shift]\n\t"
126 "mfhi\t%[t2]\n\t"
127 "mflo\t%[t3]\n\t"
128 "dsll\t%[t2],%[t2],1\n\t"
129 "dsrlv\t%[rv],%[t3],%[shift]\n\t"
130 "dsllv\t%[t1],%[t2],%[t1]\n\t"
131 "or\t%[rv],%[t1],%[rv]\n\t"
132 : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
133 : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
134 : "hi", "lo");
135 return rv;
136}
137
138void __init plat_time_init(void)
139{
140 clocksource_mips.rating = 300;
141 clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
142}
143
144void __udelay(unsigned long us)
145{
146 u64 cur, end, inc;
147
148 cur = read_c0_cvmcount();
149
150 inc = us * octeon_udelay_factor;
151 end = cur + inc;
152
153 while (end > cur)
154 cur = read_c0_cvmcount();
155}
156EXPORT_SYMBOL(__udelay);
157
158void __ndelay(unsigned long ns)
159{
160 u64 cur, end, inc;
161
162 cur = read_c0_cvmcount();
163
164 inc = ((ns * octeon_ndelay_factor) >> 16);
165 end = cur + inc;
166
167 while (end > cur)
168 cur = read_c0_cvmcount();
169}
170EXPORT_SYMBOL(__ndelay);
171
172void __delay(unsigned long loops)
173{
174 u64 cur, end;
175
176 cur = read_c0_cvmcount();
177 end = cur + loops;
178
179 while (end > cur)
180 cur = read_c0_cvmcount();
181}
182EXPORT_SYMBOL(__delay);
183
184
185/**
186 * octeon_io_clk_delay - wait for a given number of io clock cycles to pass.
187 *
188 * We scale the wait by the clock ratio, and then wait for the
189 * corresponding number of core clocks.
190 *
191 * @count: The number of clocks to wait.
192 */
193void octeon_io_clk_delay(unsigned long count)
194{
195 u64 cur, end;
196
197 cur = read_c0_cvmcount();
198 if (rdiv != 0) {
199 end = count * rdiv;
200 if (f != 0) {
201 asm("dmultu\t%[cnt],%[f]\n\t"
202 "mfhi\t%[cnt]"
203 : [cnt] "+r" (end)
204 : [f] "r" (f)
205 : "hi", "lo");
206 }
207 end = cur + end;
208 } else {
209 end = cur + count;
210 }
211 while (end > cur)
212 cur = read_c0_cvmcount();
213}
214EXPORT_SYMBOL(octeon_io_clk_delay);
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2007 by Ralf Baechle
7 * Copyright (C) 2009, 2010 Cavium Networks, Inc.
8 */
9#include <linux/clocksource.h>
10#include <linux/init.h>
11#include <linux/smp.h>
12
13#include <asm/cpu-info.h>
14#include <asm/time.h>
15
16#include <asm/octeon/octeon.h>
17#include <asm/octeon/cvmx-ipd-defs.h>
18#include <asm/octeon/cvmx-mio-defs.h>
19
20/*
21 * Set the current core's cvmcount counter to the value of the
22 * IPD_CLK_COUNT. We do this on all cores as they are brought
23 * on-line. This allows for a read from a local cpu register to
24 * access a synchronized counter.
25 *
26 * On CPU_CAVIUM_OCTEON2 the IPD_CLK_COUNT is scaled by rdiv/sdiv.
27 */
28void octeon_init_cvmcount(void)
29{
30 unsigned long flags;
31 unsigned loops = 2;
32 u64 f = 0;
33 u64 rdiv = 0;
34 u64 sdiv = 0;
35 if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
36 union cvmx_mio_rst_boot rst_boot;
37 rst_boot.u64 = cvmx_read_csr(CVMX_MIO_RST_BOOT);
38 rdiv = rst_boot.s.c_mul; /* CPU clock */
39 sdiv = rst_boot.s.pnr_mul; /* I/O clock */
40 f = (0x8000000000000000ull / sdiv) * 2;
41 }
42
43
44 /* Clobber loops so GCC will not unroll the following while loop. */
45 asm("" : "+r" (loops));
46
47 local_irq_save(flags);
48 /*
49 * Loop several times so we are executing from the cache,
50 * which should give more deterministic timing.
51 */
52 while (loops--) {
53 u64 ipd_clk_count = cvmx_read_csr(CVMX_IPD_CLK_COUNT);
54 if (rdiv != 0) {
55 ipd_clk_count *= rdiv;
56 if (f != 0) {
57 asm("dmultu\t%[cnt],%[f]\n\t"
58 "mfhi\t%[cnt]"
59 : [cnt] "+r" (ipd_clk_count),
60 [f] "=r" (f)
61 : : "hi", "lo");
62 }
63 }
64 write_c0_cvmcount(ipd_clk_count);
65 }
66 local_irq_restore(flags);
67}
68
69static cycle_t octeon_cvmcount_read(struct clocksource *cs)
70{
71 return read_c0_cvmcount();
72}
73
74static struct clocksource clocksource_mips = {
75 .name = "OCTEON_CVMCOUNT",
76 .read = octeon_cvmcount_read,
77 .mask = CLOCKSOURCE_MASK(64),
78 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
79};
80
81unsigned long long notrace sched_clock(void)
82{
83 /* 64-bit arithmatic can overflow, so use 128-bit. */
84 u64 t1, t2, t3;
85 unsigned long long rv;
86 u64 mult = clocksource_mips.mult;
87 u64 shift = clocksource_mips.shift;
88 u64 cnt = read_c0_cvmcount();
89
90 asm (
91 "dmultu\t%[cnt],%[mult]\n\t"
92 "nor\t%[t1],$0,%[shift]\n\t"
93 "mfhi\t%[t2]\n\t"
94 "mflo\t%[t3]\n\t"
95 "dsll\t%[t2],%[t2],1\n\t"
96 "dsrlv\t%[rv],%[t3],%[shift]\n\t"
97 "dsllv\t%[t1],%[t2],%[t1]\n\t"
98 "or\t%[rv],%[t1],%[rv]\n\t"
99 : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
100 : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
101 : "hi", "lo");
102 return rv;
103}
104
105void __init plat_time_init(void)
106{
107 clocksource_mips.rating = 300;
108 clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
109}
110
111static u64 octeon_udelay_factor;
112static u64 octeon_ndelay_factor;
113
114void __init octeon_setup_delays(void)
115{
116 octeon_udelay_factor = octeon_get_clock_rate() / 1000000;
117 /*
118 * For __ndelay we divide by 2^16, so the factor is multiplied
119 * by the same amount.
120 */
121 octeon_ndelay_factor = (octeon_udelay_factor * 0x10000ull) / 1000ull;
122
123 preset_lpj = octeon_get_clock_rate() / HZ;
124}
125
126void __udelay(unsigned long us)
127{
128 u64 cur, end, inc;
129
130 cur = read_c0_cvmcount();
131
132 inc = us * octeon_udelay_factor;
133 end = cur + inc;
134
135 while (end > cur)
136 cur = read_c0_cvmcount();
137}
138EXPORT_SYMBOL(__udelay);
139
140void __ndelay(unsigned long ns)
141{
142 u64 cur, end, inc;
143
144 cur = read_c0_cvmcount();
145
146 inc = ((ns * octeon_ndelay_factor) >> 16);
147 end = cur + inc;
148
149 while (end > cur)
150 cur = read_c0_cvmcount();
151}
152EXPORT_SYMBOL(__ndelay);
153
154void __delay(unsigned long loops)
155{
156 u64 cur, end;
157
158 cur = read_c0_cvmcount();
159 end = cur + loops;
160
161 while (end > cur)
162 cur = read_c0_cvmcount();
163}
164EXPORT_SYMBOL(__delay);