Loading...
Note: File does not exist in v3.1.
1/*
2 * Copyright 2014 Chen-Yu Tsai
3 *
4 * Chen-Yu Tsai <wens@csie.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45#include <dt-bindings/interrupt-controller/arm-gic.h>
46
47#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
48#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
49
50/ {
51 interrupt-parent = <&gic>;
52 #address-cells = <1>;
53 #size-cells = <1>;
54
55 chosen {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 ranges;
59
60 simplefb_lcd: framebuffer-lcd0 {
61 compatible = "allwinner,simple-framebuffer",
62 "simple-framebuffer";
63 allwinner,pipeline = "de_be0-lcd0";
64 clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
65 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
66 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
67 status = "disabled";
68 };
69 };
70
71 de: display-engine {
72 /* compatible gets set in SoC specific dtsi file */
73 allwinner,pipelines = <&fe0>;
74 status = "disabled";
75 };
76
77 timer {
78 compatible = "arm,armv7-timer";
79 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
80 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
82 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
83 clock-frequency = <24000000>;
84 arm,cpu-registers-not-fw-configured;
85 };
86
87 cpus {
88 enable-method = "allwinner,sun8i-a23";
89 #address-cells = <1>;
90 #size-cells = <0>;
91
92 cpu0: cpu@0 {
93 compatible = "arm,cortex-a7";
94 device_type = "cpu";
95 reg = <0>;
96 };
97
98 cpu@1 {
99 compatible = "arm,cortex-a7";
100 device_type = "cpu";
101 reg = <1>;
102 };
103 };
104
105 clocks {
106 #address-cells = <1>;
107 #size-cells = <1>;
108 ranges;
109
110 osc24M: osc24M_clk {
111 #clock-cells = <0>;
112 compatible = "fixed-clock";
113 clock-frequency = <24000000>;
114 clock-accuracy = <50000>;
115 clock-output-names = "osc24M";
116 };
117
118 ext_osc32k: ext_osc32k_clk {
119 #clock-cells = <0>;
120 compatible = "fixed-clock";
121 clock-frequency = <32768>;
122 clock-accuracy = <50000>;
123 clock-output-names = "ext-osc32k";
124 };
125 };
126
127 soc {
128 compatible = "simple-bus";
129 #address-cells = <1>;
130 #size-cells = <1>;
131 ranges;
132
133 system-control@1c00000 {
134 compatible = "allwinner,sun8i-a23-system-control";
135 reg = <0x01c00000 0x30>;
136 #address-cells = <1>;
137 #size-cells = <1>;
138 ranges;
139
140 sram_c: sram@1d00000 {
141 compatible = "mmio-sram";
142 reg = <0x01d00000 0x80000>;
143 #address-cells = <1>;
144 #size-cells = <1>;
145 ranges = <0 0x01d00000 0x80000>;
146
147 ve_sram: sram-section@0 {
148 compatible = "allwinner,sun8i-a23-sram-c1",
149 "allwinner,sun4i-a10-sram-c1";
150 reg = <0x000000 0x80000>;
151 };
152 };
153 };
154
155 dma: dma-controller@1c02000 {
156 compatible = "allwinner,sun8i-a23-dma";
157 reg = <0x01c02000 0x1000>;
158 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&ccu CLK_BUS_DMA>;
160 resets = <&ccu RST_BUS_DMA>;
161 #dma-cells = <1>;
162 };
163
164 nfc: nand-controller@1c03000 {
165 compatible = "allwinner,sun8i-a23-nand-controller";
166 reg = <0x01c03000 0x1000>;
167 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
168 clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
169 clock-names = "ahb", "mod";
170 resets = <&ccu RST_BUS_NAND>;
171 reset-names = "ahb";
172 dmas = <&dma 5>;
173 dma-names = "rxtx";
174 pinctrl-names = "default";
175 pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
176 status = "disabled";
177 #address-cells = <1>;
178 #size-cells = <0>;
179 };
180
181 tcon0: lcd-controller@1c0c000 {
182 /* compatible gets set in SoC specific dtsi file */
183 reg = <0x01c0c000 0x1000>;
184 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
185 clocks = <&ccu CLK_BUS_LCD>,
186 <&ccu CLK_LCD_CH0>;
187 clock-names = "ahb",
188 "tcon-ch0";
189 clock-output-names = "tcon-pixel-clock";
190 #clock-cells = <0>;
191 resets = <&ccu RST_BUS_LCD>;
192 reset-names = "lcd";
193 status = "disabled";
194
195 ports {
196 #address-cells = <1>;
197 #size-cells = <0>;
198
199 tcon0_in: port@0 {
200 reg = <0>;
201
202 tcon0_in_drc0: endpoint {
203 remote-endpoint = <&drc0_out_tcon0>;
204 };
205 };
206
207 tcon0_out: port@1 {
208 reg = <1>;
209 };
210 };
211 };
212
213 mmc0: mmc@1c0f000 {
214 compatible = "allwinner,sun7i-a20-mmc";
215 reg = <0x01c0f000 0x1000>;
216 clocks = <&ccu CLK_BUS_MMC0>,
217 <&ccu CLK_MMC0>,
218 <&ccu CLK_MMC0_OUTPUT>,
219 <&ccu CLK_MMC0_SAMPLE>;
220 clock-names = "ahb",
221 "mmc",
222 "output",
223 "sample";
224 resets = <&ccu RST_BUS_MMC0>;
225 reset-names = "ahb";
226 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&mmc0_pins>;
229 status = "disabled";
230 #address-cells = <1>;
231 #size-cells = <0>;
232 };
233
234 mmc1: mmc@1c10000 {
235 compatible = "allwinner,sun7i-a20-mmc";
236 reg = <0x01c10000 0x1000>;
237 clocks = <&ccu CLK_BUS_MMC1>,
238 <&ccu CLK_MMC1>,
239 <&ccu CLK_MMC1_OUTPUT>,
240 <&ccu CLK_MMC1_SAMPLE>;
241 clock-names = "ahb",
242 "mmc",
243 "output",
244 "sample";
245 resets = <&ccu RST_BUS_MMC1>;
246 reset-names = "ahb";
247 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
248 status = "disabled";
249 #address-cells = <1>;
250 #size-cells = <0>;
251 };
252
253 mmc2: mmc@1c11000 {
254 compatible = "allwinner,sun7i-a20-mmc";
255 reg = <0x01c11000 0x1000>;
256 clocks = <&ccu CLK_BUS_MMC2>,
257 <&ccu CLK_MMC2>,
258 <&ccu CLK_MMC2_OUTPUT>,
259 <&ccu CLK_MMC2_SAMPLE>;
260 clock-names = "ahb",
261 "mmc",
262 "output",
263 "sample";
264 resets = <&ccu RST_BUS_MMC2>;
265 reset-names = "ahb";
266 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
267 status = "disabled";
268 #address-cells = <1>;
269 #size-cells = <0>;
270 };
271
272 usb_otg: usb@1c19000 {
273 /* compatible gets set in SoC specific dtsi file */
274 reg = <0x01c19000 0x0400>;
275 clocks = <&ccu CLK_BUS_OTG>;
276 resets = <&ccu RST_BUS_OTG>;
277 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
278 interrupt-names = "mc";
279 phys = <&usbphy 0>;
280 phy-names = "usb";
281 extcon = <&usbphy 0>;
282 dr_mode = "otg";
283 status = "disabled";
284 };
285
286 usbphy: phy@1c19400 {
287 /*
288 * compatible and address regions get set in
289 * SoC specific dtsi file
290 */
291 clocks = <&ccu CLK_USB_PHY0>,
292 <&ccu CLK_USB_PHY1>;
293 clock-names = "usb0_phy",
294 "usb1_phy";
295 resets = <&ccu RST_USB_PHY0>,
296 <&ccu RST_USB_PHY1>;
297 reset-names = "usb0_reset",
298 "usb1_reset";
299 status = "disabled";
300 #phy-cells = <1>;
301 };
302
303 ehci0: usb@1c1a000 {
304 compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
305 reg = <0x01c1a000 0x100>;
306 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
307 clocks = <&ccu CLK_BUS_EHCI>;
308 resets = <&ccu RST_BUS_EHCI>;
309 phys = <&usbphy 1>;
310 phy-names = "usb";
311 status = "disabled";
312 };
313
314 ohci0: usb@1c1a400 {
315 compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
316 reg = <0x01c1a400 0x100>;
317 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
318 clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
319 resets = <&ccu RST_BUS_OHCI>;
320 phys = <&usbphy 1>;
321 phy-names = "usb";
322 status = "disabled";
323 };
324
325 ccu: clock@1c20000 {
326 reg = <0x01c20000 0x400>;
327 clocks = <&osc24M>, <&rtc 0>;
328 clock-names = "hosc", "losc";
329 #clock-cells = <1>;
330 #reset-cells = <1>;
331 };
332
333 pio: pinctrl@1c20800 {
334 /* compatible gets set in SoC specific dtsi file */
335 reg = <0x01c20800 0x400>;
336 /* interrupts get set in SoC specific dtsi file */
337 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
338 clock-names = "apb", "hosc", "losc";
339 gpio-controller;
340 interrupt-controller;
341 #interrupt-cells = <3>;
342 #gpio-cells = <3>;
343
344 i2c0_pins: i2c0-pins {
345 pins = "PH2", "PH3";
346 function = "i2c0";
347 };
348
349 i2c1_pins: i2c1-pins {
350 pins = "PH4", "PH5";
351 function = "i2c1";
352 };
353
354 i2c2_pins: i2c2-pins {
355 pins = "PE12", "PE13";
356 function = "i2c2";
357 };
358
359 lcd_rgb666_pins: lcd-rgb666-pins {
360 pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
361 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
362 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
363 "PD24", "PD25", "PD26", "PD27";
364 function = "lcd0";
365 };
366
367 mmc0_pins: mmc0-pins {
368 pins = "PF0", "PF1", "PF2",
369 "PF3", "PF4", "PF5";
370 function = "mmc0";
371 drive-strength = <30>;
372 bias-pull-up;
373 };
374
375 mmc1_pg_pins: mmc1-pg-pins {
376 pins = "PG0", "PG1", "PG2",
377 "PG3", "PG4", "PG5";
378 function = "mmc1";
379 drive-strength = <30>;
380 bias-pull-up;
381 };
382
383 mmc2_8bit_pins: mmc2-8bit-pins {
384 pins = "PC5", "PC6", "PC8",
385 "PC9", "PC10", "PC11",
386 "PC12", "PC13", "PC14",
387 "PC15", "PC16";
388 function = "mmc2";
389 drive-strength = <30>;
390 bias-pull-up;
391 };
392
393 nand_pins: nand-pins {
394 pins = "PC0", "PC1", "PC2", "PC5",
395 "PC8", "PC9", "PC10", "PC11",
396 "PC12", "PC13", "PC14", "PC15";
397 function = "nand0";
398 };
399
400 nand_cs0_pin: nand-cs0-pin {
401 pins = "PC4";
402 function = "nand0";
403 bias-pull-up;
404 };
405
406 nand_cs1_pin: nand-cs1-pin {
407 pins = "PC3";
408 function = "nand0";
409 bias-pull-up;
410 };
411
412 nand_rb0_pin: nand-rb0-pin {
413 pins = "PC6";
414 function = "nand0";
415 bias-pull-up;
416 };
417
418 nand_rb1_pin: nand-rb1-pin {
419 pins = "PC7";
420 function = "nand0";
421 bias-pull-up;
422 };
423
424 pwm0_pin: pwm0-pin {
425 pins = "PH0";
426 function = "pwm0";
427 };
428
429 uart0_pf_pins: uart0-pf-pins {
430 pins = "PF2", "PF4";
431 function = "uart0";
432 };
433
434 uart1_pg_pins: uart1-pg-pins {
435 pins = "PG6", "PG7";
436 function = "uart1";
437 };
438
439 uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
440 pins = "PG8", "PG9";
441 function = "uart1";
442 };
443 };
444
445 timer@1c20c00 {
446 compatible = "allwinner,sun8i-a23-timer";
447 reg = <0x01c20c00 0xa0>;
448 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
449 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
450 clocks = <&osc24M>;
451 };
452
453 wdt0: watchdog@1c20ca0 {
454 compatible = "allwinner,sun6i-a31-wdt";
455 reg = <0x01c20ca0 0x20>;
456 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
457 clocks = <&osc24M>;
458 };
459
460 pwm: pwm@1c21400 {
461 compatible = "allwinner,sun7i-a20-pwm";
462 reg = <0x01c21400 0xc>;
463 clocks = <&osc24M>;
464 #pwm-cells = <3>;
465 status = "disabled";
466 };
467
468 lradc: lradc@1c22800 {
469 compatible = "allwinner,sun4i-a10-lradc-keys";
470 reg = <0x01c22800 0x100>;
471 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
472 status = "disabled";
473 };
474
475 uart0: serial@1c28000 {
476 compatible = "snps,dw-apb-uart";
477 reg = <0x01c28000 0x400>;
478 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
479 reg-shift = <2>;
480 reg-io-width = <4>;
481 clocks = <&ccu CLK_BUS_UART0>;
482 resets = <&ccu RST_BUS_UART0>;
483 dmas = <&dma 6>, <&dma 6>;
484 dma-names = "rx", "tx";
485 status = "disabled";
486 };
487
488 uart1: serial@1c28400 {
489 compatible = "snps,dw-apb-uart";
490 reg = <0x01c28400 0x400>;
491 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
492 reg-shift = <2>;
493 reg-io-width = <4>;
494 clocks = <&ccu CLK_BUS_UART1>;
495 resets = <&ccu RST_BUS_UART1>;
496 dmas = <&dma 7>, <&dma 7>;
497 dma-names = "rx", "tx";
498 status = "disabled";
499 };
500
501 uart2: serial@1c28800 {
502 compatible = "snps,dw-apb-uart";
503 reg = <0x01c28800 0x400>;
504 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
505 reg-shift = <2>;
506 reg-io-width = <4>;
507 clocks = <&ccu CLK_BUS_UART2>;
508 resets = <&ccu RST_BUS_UART2>;
509 dmas = <&dma 8>, <&dma 8>;
510 dma-names = "rx", "tx";
511 status = "disabled";
512 };
513
514 uart3: serial@1c28c00 {
515 compatible = "snps,dw-apb-uart";
516 reg = <0x01c28c00 0x400>;
517 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
518 reg-shift = <2>;
519 reg-io-width = <4>;
520 clocks = <&ccu CLK_BUS_UART3>;
521 resets = <&ccu RST_BUS_UART3>;
522 dmas = <&dma 9>, <&dma 9>;
523 dma-names = "rx", "tx";
524 status = "disabled";
525 };
526
527 uart4: serial@1c29000 {
528 compatible = "snps,dw-apb-uart";
529 reg = <0x01c29000 0x400>;
530 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
531 reg-shift = <2>;
532 reg-io-width = <4>;
533 clocks = <&ccu CLK_BUS_UART4>;
534 resets = <&ccu RST_BUS_UART4>;
535 dmas = <&dma 10>, <&dma 10>;
536 dma-names = "rx", "tx";
537 status = "disabled";
538 };
539
540 i2c0: i2c@1c2ac00 {
541 compatible = "allwinner,sun6i-a31-i2c";
542 reg = <0x01c2ac00 0x400>;
543 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
544 clocks = <&ccu CLK_BUS_I2C0>;
545 resets = <&ccu RST_BUS_I2C0>;
546 pinctrl-names = "default";
547 pinctrl-0 = <&i2c0_pins>;
548 status = "disabled";
549 #address-cells = <1>;
550 #size-cells = <0>;
551 };
552
553 i2c1: i2c@1c2b000 {
554 compatible = "allwinner,sun6i-a31-i2c";
555 reg = <0x01c2b000 0x400>;
556 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
557 clocks = <&ccu CLK_BUS_I2C1>;
558 resets = <&ccu RST_BUS_I2C1>;
559 pinctrl-names = "default";
560 pinctrl-0 = <&i2c1_pins>;
561 status = "disabled";
562 #address-cells = <1>;
563 #size-cells = <0>;
564 };
565
566 i2c2: i2c@1c2b400 {
567 compatible = "allwinner,sun6i-a31-i2c";
568 reg = <0x01c2b400 0x400>;
569 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
570 clocks = <&ccu CLK_BUS_I2C2>;
571 resets = <&ccu RST_BUS_I2C2>;
572 pinctrl-names = "default";
573 pinctrl-0 = <&i2c2_pins>;
574 status = "disabled";
575 #address-cells = <1>;
576 #size-cells = <0>;
577 };
578
579 mali: gpu@1c40000 {
580 compatible = "allwinner,sun8i-a23-mali",
581 "allwinner,sun7i-a20-mali", "arm,mali-400";
582 reg = <0x01c40000 0x10000>;
583 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
584 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
585 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
586 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
587 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
588 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
589 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
590 interrupt-names = "gp",
591 "gpmmu",
592 "pp0",
593 "ppmmu0",
594 "pp1",
595 "ppmmu1",
596 "pmu";
597 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
598 clock-names = "bus", "core";
599 resets = <&ccu RST_BUS_GPU>;
600 #cooling-cells = <2>;
601
602 assigned-clocks = <&ccu CLK_GPU>;
603 assigned-clock-rates = <384000000>;
604 };
605
606 gic: interrupt-controller@1c81000 {
607 compatible = "arm,gic-400";
608 reg = <0x01c81000 0x1000>,
609 <0x01c82000 0x2000>,
610 <0x01c84000 0x2000>,
611 <0x01c86000 0x2000>;
612 interrupt-controller;
613 #interrupt-cells = <3>;
614 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
615 };
616
617 fe0: display-frontend@1e00000 {
618 /* compatible gets set in SoC specific dtsi file */
619 reg = <0x01e00000 0x20000>;
620 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
621 clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
622 <&ccu CLK_DRAM_DE_FE>;
623 clock-names = "ahb", "mod",
624 "ram";
625 resets = <&ccu RST_BUS_DE_FE>;
626
627 ports {
628 #address-cells = <1>;
629 #size-cells = <0>;
630
631 fe0_out: port@1 {
632 reg = <1>;
633
634 fe0_out_be0: endpoint {
635 remote-endpoint = <&be0_in_fe0>;
636 };
637 };
638 };
639 };
640
641 be0: display-backend@1e60000 {
642 /* compatible gets set in SoC specific dtsi file */
643 reg = <0x01e60000 0x10000>;
644 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
645 clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
646 <&ccu CLK_DRAM_DE_BE>;
647 clock-names = "ahb", "mod",
648 "ram";
649 resets = <&ccu RST_BUS_DE_BE>;
650
651 ports {
652 #address-cells = <1>;
653 #size-cells = <0>;
654
655 be0_in: port@0 {
656 reg = <0>;
657
658 be0_in_fe0: endpoint {
659 remote-endpoint = <&fe0_out_be0>;
660 };
661 };
662
663 be0_out: port@1 {
664 reg = <1>;
665
666 be0_out_drc0: endpoint {
667 remote-endpoint = <&drc0_in_be0>;
668 };
669 };
670 };
671 };
672
673 drc0: drc@1e70000 {
674 /* compatible gets set in SoC specific dtsi file */
675 reg = <0x01e70000 0x10000>;
676 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
677 clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
678 <&ccu CLK_DRAM_DRC>;
679 clock-names = "ahb", "mod", "ram";
680 resets = <&ccu RST_BUS_DRC>;
681
682 assigned-clocks = <&ccu CLK_DRC>;
683 assigned-clock-rates = <300000000>;
684
685 ports {
686 #address-cells = <1>;
687 #size-cells = <0>;
688
689 drc0_in: port@0 {
690 reg = <0>;
691
692 drc0_in_be0: endpoint {
693 remote-endpoint = <&be0_out_drc0>;
694 };
695 };
696
697 drc0_out: port@1 {
698 reg = <1>;
699
700 drc0_out_tcon0: endpoint {
701 remote-endpoint = <&tcon0_in_drc0>;
702 };
703 };
704 };
705 };
706
707 rtc: rtc@1f00000 {
708 compatible = "allwinner,sun8i-a23-rtc";
709 reg = <0x01f00000 0x400>;
710 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
711 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
712 clock-output-names = "osc32k", "osc32k-out";
713 clocks = <&ext_osc32k>;
714 #clock-cells = <1>;
715 };
716
717 nmi_intc: interrupt-controller@1f00c00 {
718 compatible = "allwinner,sun6i-a31-r-intc";
719 interrupt-controller;
720 #interrupt-cells = <2>;
721 reg = <0x01f00c00 0x400>;
722 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
723 };
724
725 prcm@1f01400 {
726 compatible = "allwinner,sun8i-a23-prcm";
727 reg = <0x01f01400 0x200>;
728
729 ar100: ar100_clk {
730 compatible = "fixed-factor-clock";
731 #clock-cells = <0>;
732 clock-div = <1>;
733 clock-mult = <1>;
734 clocks = <&osc24M>;
735 clock-output-names = "ar100";
736 };
737
738 ahb0: ahb0_clk {
739 compatible = "fixed-factor-clock";
740 #clock-cells = <0>;
741 clock-div = <1>;
742 clock-mult = <1>;
743 clocks = <&ar100>;
744 clock-output-names = "ahb0";
745 };
746
747 apb0: apb0_clk {
748 compatible = "allwinner,sun8i-a23-apb0-clk";
749 #clock-cells = <0>;
750 clocks = <&ahb0>;
751 clock-output-names = "apb0";
752 };
753
754 apb0_gates: apb0_gates_clk {
755 compatible = "allwinner,sun8i-a23-apb0-gates-clk";
756 #clock-cells = <1>;
757 clocks = <&apb0>;
758 clock-output-names = "apb0_pio", "apb0_timer",
759 "apb0_rsb", "apb0_uart",
760 "apb0_i2c";
761 };
762
763 apb0_rst: apb0_rst {
764 compatible = "allwinner,sun6i-a31-clock-reset";
765 #reset-cells = <1>;
766 };
767
768 codec_analog: codec-analog {
769 compatible = "allwinner,sun8i-a23-codec-analog";
770 };
771 };
772
773 cpucfg@1f01c00 {
774 compatible = "allwinner,sun8i-a23-cpuconfig";
775 reg = <0x01f01c00 0x300>;
776 };
777
778 r_uart: serial@1f02800 {
779 compatible = "snps,dw-apb-uart";
780 reg = <0x01f02800 0x400>;
781 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
782 reg-shift = <2>;
783 reg-io-width = <4>;
784 clocks = <&apb0_gates 4>;
785 resets = <&apb0_rst 4>;
786 status = "disabled";
787 };
788
789 r_i2c: i2c@1f02400 {
790 compatible = "allwinner,sun8i-a23-i2c",
791 "allwinner,sun6i-a31-i2c";
792 reg = <0x01f02400 0x400>;
793 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
794 pinctrl-names = "default";
795 pinctrl-0 = <&r_i2c_pins>;
796 clocks = <&apb0_gates 6>;
797 resets = <&apb0_rst 6>;
798 status = "disabled";
799 #address-cells = <1>;
800 #size-cells = <0>;
801 };
802
803 r_pio: pinctrl@1f02c00 {
804 compatible = "allwinner,sun8i-a23-r-pinctrl";
805 reg = <0x01f02c00 0x400>;
806 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
807 clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
808 clock-names = "apb", "hosc", "losc";
809 resets = <&apb0_rst 0>;
810 gpio-controller;
811 interrupt-controller;
812 #interrupt-cells = <3>;
813 #gpio-cells = <3>;
814
815 r_i2c_pins: r-i2c-pins {
816 pins = "PL0", "PL1";
817 function = "s_i2c";
818 bias-pull-up;
819 };
820
821 r_rsb_pins: r-rsb-pins {
822 pins = "PL0", "PL1";
823 function = "s_rsb";
824 drive-strength = <20>;
825 bias-pull-up;
826 };
827
828 r_uart_pins_a: r-uart-pins {
829 pins = "PL2", "PL3";
830 function = "s_uart";
831 };
832 };
833
834 r_rsb: rsb@1f03400 {
835 compatible = "allwinner,sun8i-a23-rsb";
836 reg = <0x01f03400 0x400>;
837 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
838 clocks = <&apb0_gates 3>;
839 clock-frequency = <3000000>;
840 resets = <&apb0_rst 3>;
841 pinctrl-names = "default";
842 pinctrl-0 = <&r_rsb_pins>;
843 status = "disabled";
844 #address-cells = <1>;
845 #size-cells = <0>;
846 };
847 };
848};