Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include "rk3066a.dtsi"
9
10/ {
11 model = "Rayeager PX2";
12 compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
13
14 memory@60000000 {
15 device_type = "memory";
16 reg = <0x60000000 0x40000000>;
17 };
18
19 ir: ir-receiver {
20 compatible = "gpio-ir-receiver";
21 gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
22 pinctrl-names = "default";
23 pinctrl-0 = <&ir_int>;
24 };
25
26 keys: gpio-keys {
27 compatible = "gpio-keys";
28
29 power {
30 wakeup-source;
31 gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
32 label = "GPIO Power";
33 linux,code = <KEY_POWER>;
34 pinctrl-names = "default";
35 pinctrl-0 = <&pwr_key>;
36 };
37 };
38
39 vdd_log: vdd-log {
40 compatible = "pwm-regulator";
41 pwms = <&pwm3 0 1000>;
42 regulator-name = "vdd_log";
43 regulator-min-microvolt = <1200000>;
44 regulator-max-microvolt = <1200000>;
45 regulator-always-on;
46 voltage-table = <1000000 100>,
47 <1200000 42>;
48 status = "okay";
49 };
50
51 vsys: vsys-regulator {
52 compatible = "regulator-fixed";
53 regulator-name = "vsys";
54 regulator-min-microvolt = <5000000>;
55 regulator-max-microvolt = <5000000>;
56 regulator-always-on;
57 regulator-boot-on;
58 };
59
60 /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
61 vcc_stdby: 5v-stdby-regulator {
62 compatible = "regulator-fixed";
63 regulator-name = "5v_stdby";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 regulator-always-on;
67 regulator-boot-on;
68 };
69
70 vcc_emmc: emmc-regulator {
71 compatible = "regulator-fixed";
72 regulator-name = "emmc_vccq";
73 regulator-min-microvolt = <3000000>;
74 regulator-max-microvolt = <3000000>;
75 vin-supply = <&vsys>;
76 };
77
78 vcc_sata: sata-regulator {
79 compatible = "regulator-fixed";
80 enable-active-high;
81 gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&sata_pwr>;
84 regulator-name = "usb_5v";
85 regulator-min-microvolt = <5000000>;
86 regulator-max-microvolt = <5000000>;
87 regulator-always-on;
88 vin-supply = <&vcc_stdby>;
89 };
90
91 vcc_sd: sdmmc-regulator {
92 compatible = "regulator-fixed";
93 gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&sdmmc_pwr>;
96 regulator-name = "vcc_sd";
97 regulator-min-microvolt = <3300000>;
98 regulator-max-microvolt = <3300000>;
99 startup-delay-us = <100000>;
100 vin-supply = <&vcc_io>;
101 };
102
103 vcc_host: usb-host-regulator {
104 compatible = "regulator-fixed";
105 enable-active-high;
106 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
107 pinctrl-names = "default";
108 pinctrl-0 = <&host_drv>;
109 regulator-name = "host-pwr";
110 regulator-min-microvolt = <5000000>;
111 regulator-max-microvolt = <5000000>;
112 regulator-always-on;
113 vin-supply = <&vcc_stdby>;
114 };
115
116 vcc_otg: usb-otg-regulator {
117 compatible = "regulator-fixed";
118 enable-active-high;
119 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
120 pinctrl-names = "default";
121 pinctrl-0 = <&otg_drv>;
122 regulator-name = "vcc_otg";
123 regulator-min-microvolt = <5000000>;
124 regulator-max-microvolt = <5000000>;
125 regulator-always-on;
126 vin-supply = <&vcc_stdby>;
127 };
128};
129
130&cpu0 {
131 cpu0-supply = <&vdd_arm>;
132};
133
134&emac {
135 pinctrl-names = "default";
136 pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
137 phy = <&phy0>;
138 phy-supply = <&vcc_rmii>;
139 status = "okay";
140
141 phy0: ethernet-phy@0 {
142 reg = <0>;
143 reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
144 };
145};
146
147&emmc {
148 bus-width = <8>;
149 cap-mmc-highspeed;
150 non-removable;
151 pinctrl-names = "default";
152 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
153 vmmc-supply = <&vcc_emmc>;
154 vqmmc-supply = <&vcc_emmc>;
155 status = "okay";
156};
157
158&i2c0 {
159 clock-frequency = <400000>;
160 status = "okay";
161
162 ak8963: ak8963@d {
163 compatible = "asahi-kasei,ak8975";
164 reg = <0x0d>;
165 interrupt-parent = <&gpio4>;
166 interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&comp_int>;
169 };
170
171 mma8452: mma8452@1d {
172 compatible = "fsl,mma8452";
173 reg = <0x1d>;
174 interrupt-parent = <&gpio4>;
175 interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&gsensor_int>;
178 };
179};
180
181&i2c1 {
182 clock-frequency = <400000>;
183 status = "okay";
184
185 tps: tps@2d {
186 reg = <0x2d>;
187 interrupt-parent = <&gpio6>;
188 interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&pmic_int>, <&pwr_hold>;
191
192 vcc1-supply = <&vsys>;
193 vcc2-supply = <&vsys>;
194 vcc3-supply = <&vsys>;
195 vcc4-supply = <&vsys>;
196 vcc5-supply = <&vcc_io>;
197 vcc6-supply = <&vcc_io>;
198 vcc7-supply = <&vsys>;
199 vccio-supply = <&vsys>;
200
201 regulators {
202 vcc_rtc: regulator@0 {
203 regulator-name = "vcc_rtc";
204 regulator-always-on;
205 };
206
207 vcc_io: regulator@1 {
208 regulator-name = "vcc_io";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 regulator-always-on;
212 };
213
214 vdd_arm: regulator@2 {
215 regulator-name = "vdd_arm";
216 regulator-min-microvolt = <600000>;
217 regulator-max-microvolt = <1500000>;
218 regulator-always-on;
219 regulator-boot-on;
220 };
221
222 vcc_ddr: regulator@3 {
223 regulator-name = "vcc_ddr";
224 regulator-min-microvolt = <600000>;
225 regulator-max-microvolt = <1500000>;
226 regulator-always-on;
227 regulator-boot-on;
228 };
229
230 vcc18: regulator@5 {
231 regulator-name = "vcc18";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
234 regulator-always-on;
235 };
236
237 vdd_11: regulator@6 {
238 regulator-name = "vdd_11";
239 regulator-min-microvolt = <1100000>;
240 regulator-max-microvolt = <1100000>;
241 regulator-always-on;
242 };
243
244 vcc_25: regulator@7 {
245 regulator-name = "vcc_25";
246 regulator-min-microvolt = <2500000>;
247 regulator-max-microvolt = <2500000>;
248 regulator-always-on;
249 };
250
251 vccio_wl: regulator@8 {
252 regulator-name = "vccio_wl";
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 };
256
257 vcc25_hdmi: regulator@9 {
258 regulator-name = "vcc25_hdmi";
259 regulator-min-microvolt = <2500000>;
260 regulator-max-microvolt = <2500000>;
261 };
262
263 vcca_33: regulator@10 {
264 regulator-name = "vcca_33";
265 regulator-min-microvolt = <3300000>;
266 regulator-max-microvolt = <3300000>;
267 };
268
269 vcc_rmii: regulator@11 {
270 regulator-name = "vcc_rmii";
271 regulator-min-microvolt = <3300000>;
272 regulator-max-microvolt = <3300000>;
273 };
274
275 vcc28_cif: regulator@12 {
276 regulator-name = "vcc28_cif";
277 regulator-min-microvolt = <2800000>;
278 regulator-max-microvolt = <2800000>;
279 };
280 };
281 };
282};
283
284#include "tps65910.dtsi"
285
286&i2c2 {
287 status = "okay";
288};
289
290&i2c3 {
291 status = "okay";
292};
293
294&i2c4 {
295 status = "okay";
296};
297
298&mmc0 {
299 bus-width = <4>;
300 disable-wp;
301 pinctrl-names = "default";
302 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
303 vmmc-supply = <&vcc_sd>;
304 cap-mmc-highspeed;
305 cap-sd-highspeed;
306 status = "okay";
307};
308
309&mmc1 {
310 bus-width = <4>;
311 non-removable;
312 pinctrl-names = "default";
313 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
314 vmmc-supply = <&vccio_wl>;
315 status = "okay";
316};
317
318&pinctrl {
319 pcfg_output_high: pcfg-output-high {
320 output-high;
321 };
322
323 ak8963 {
324 comp_int: comp-int {
325 rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
326 };
327 };
328
329 emac {
330 rmii_rst: rmii-rst {
331 rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
332 };
333 };
334
335 ir {
336 ir_int: ir-int {
337 rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
338 };
339 };
340
341 keys {
342 pwr_key: pwr-key {
343 rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
344 };
345 };
346
347 mma8452 {
348 gsensor_int: gsensor-int {
349 rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
350 };
351 };
352
353 mmc {
354 sdmmc_pwr: sdmmc-pwr {
355 rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
356 };
357 };
358
359 usb_host {
360 host_drv: host-drv {
361 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
362 };
363
364 hub_rst: hub-rst {
365 rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
366 };
367
368 sata_pwr: sata-pwr {
369 rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
370 };
371
372 sata_reset: sata-reset {
373 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
374 };
375 };
376
377 usb_otg {
378 otg_drv: otg-drv {
379 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
380 };
381 };
382
383 tps {
384 pmic_int: pmic-int {
385 rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
386 };
387
388 pwr_hold: pwr-hold {
389 rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
390 };
391 };
392};
393
394&pwm1 {
395 status = "okay";
396};
397
398&pwm2 {
399 status = "okay";
400};
401
402&pwm3 {
403 status = "okay";
404};
405
406&saradc {
407 vref-supply = <&vcc_25>;
408 status = "okay";
409};
410
411&spi0 {
412 status = "okay";
413};
414
415&uart0 {
416 pinctrl-names = "default";
417 pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
418 status = "okay";
419};
420
421&uart2 {
422 status = "okay";
423};
424
425&uart3 {
426 pinctrl-names = "default";
427 pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
428 status = "okay";
429};
430
431&usb_host {
432 pinctrl-names = "default";
433 pinctrl-0 = <&hub_rst>, <&sata_reset>;
434 status = "okay";
435};
436
437&usbphy {
438 status = "okay";
439};
440
441&usb_otg {
442 status = "okay";
443};
444
445&wdt {
446 status = "okay";
447};