Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 | /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * drivers/usb/input/yealink.h * * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com> */ #ifndef INPUT_YEALINK_H #define INPUT_YEALINK_H /* Using the control channel on interface 3 various aspects of the phone * can be controlled like LCD, LED, dialtone and the ringtone. */ struct yld_ctl_packet { u8 cmd; /* command code, see below */ u8 size; /* 1-11, size of used data bytes. */ __be16 offset; /* internal packet offset */ u8 data[11]; s8 sum; /* negative sum of 15 preceding bytes */ } __attribute__ ((packed)); #define USB_PKT_LEN sizeof(struct yld_ctl_packet) /* The following yld_ctl_packet's are available: */ /* Init registers * * cmd 0x8e * size 10 * offset 0 * data 0,0,0,0.... */ #define CMD_INIT 0x8e /* Request key scan * * cmd 0x80 * size 1 * offset 0 * data[0] on return returns the key number, if it changes there's a new * key pressed. */ #define CMD_KEYPRESS 0x80 /* Request scancode * * cmd 0x81 * size 1 * offset key number [0-1f] * data[0] on return returns the scancode */ #define CMD_SCANCODE 0x81 /* Set LCD * * cmd 0x04 * size 1-11 * offset 0-23 * data segment bits */ #define CMD_LCD 0x04 /* Set led * * cmd 0x05 * size 1 * offset 0 * data[0] 0 OFF / 1 ON */ #define CMD_LED 0x05 /* Set ringtone volume * * cmd 0x11 * size 1 * offset 0 * data[0] 0-0xff volume */ #define CMD_RING_VOLUME 0x11 /* Set ringtone notes * * cmd 0x02 * size 1-11 * offset 0-> * data binary representation LE16(-freq), LE16(duration) .... */ #define CMD_RING_NOTE 0x02 /* Sound ringtone via the speaker on the back * * cmd 0x03 * size 1 * offset 0 * data[0] 0 OFF / 0x24 ON */ #define CMD_RINGTONE 0x03 /* Sound dial tone via the ear speaker * * cmd 0x09 * size 1 * offset 0 * data[0] 0 OFF / 1 ON */ #define CMD_DIALTONE 0x09 #endif /* INPUT_YEALINK_H */ #if defined(_SEG) && defined(_PIC) /* This table maps the LCD segments onto individual bit positions in the * yld_status struct. */ /* LCD, each segment must be driven separately. * * Layout: * * |[] [][] [][] [][] in |[][] * |[] M [][] D [][] : [][] out |[][] * store * * NEW REP SU MO TU WE TH FR SA * * [] [] [] [] [] [] [] [] [] [] [] [] * [] [] [] [] [] [] [] [] [] [] [] [] */ /* Line 1 * Format : 18.e8.M8.88...188 * Icon names : M D : IN OUT STORE */ #define LCD_LINE1_OFFSET 0 #define LCD_LINE1_SIZE 17 /* Note: first g then f => ! ! */ /* _SEG( type a b c d e g f ) */ _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ), _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ), _PIC('.', 22,1 , "M" ), _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ), _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ), _PIC('.', 15,8 , "D" ), _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ), _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ), _PIC('.', 11,8 , ":" ), _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ), _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ), _PIC('.', 7,1 , "IN" ), _PIC('.', 7,2 , "OUT" ), _PIC('.', 7,4 , "STORE" ), _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ), _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ), _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ), /* Line 2 * Format : ......... * Pict. name : NEW REP SU MO TU WE TH FR SA */ #define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE #define LCD_LINE2_SIZE 9 _PIC('.', 23,2 , "NEW" ), _PIC('.', 23,4 , "REP" ), _PIC('.', 1,8 , "SU" ), _PIC('.', 1,4 , "MO" ), _PIC('.', 1,2 , "TU" ), _PIC('.', 1,1 , "WE" ), _PIC('.', 0,1 , "TH" ), _PIC('.', 0,2 , "FR" ), _PIC('.', 0,4 , "SA" ), /* Line 3 * Format : 888888888888 */ #define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE #define LCD_LINE3_SIZE 12 _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ), _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ), _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ), _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ), _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ), _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ), _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ), _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ), _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ), _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ), _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ), _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ), /* Line 4 * * The LED, DIALTONE and RINGTONE are implemented as icons and use the same * sysfs interface. */ #define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ), _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ), _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ), #undef _SEG #undef _PIC #endif /* _SEG && _PIC */ |