1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 */
   4
   5#include <linux/init.h>
   6#include <linux/slab.h>
   7#include <linux/usb.h>
   8#include <linux/usb/audio.h>
   9#include <linux/usb/midi.h>
  10#include <linux/bits.h>
  11
  12#include <sound/control.h>
  13#include <sound/core.h>
  14#include <sound/info.h>
  15#include <sound/pcm.h>
  16
  17#include "usbaudio.h"
  18#include "card.h"
  19#include "mixer.h"
  20#include "mixer_quirks.h"
  21#include "midi.h"
 
  22#include "quirks.h"
  23#include "helper.h"
  24#include "endpoint.h"
  25#include "pcm.h"
  26#include "clock.h"
  27#include "stream.h"
  28
  29/*
  30 * handle the quirks for the contained interfaces
  31 */
  32static int create_composite_quirk(struct snd_usb_audio *chip,
  33				  struct usb_interface *iface,
  34				  struct usb_driver *driver,
  35				  const struct snd_usb_audio_quirk *quirk_comp)
  36{
  37	int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
  38	const struct snd_usb_audio_quirk *quirk;
  39	int err;
  40
  41	for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
  42		iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
  43		if (!iface)
  44			continue;
  45		if (quirk->ifnum != probed_ifnum &&
  46		    usb_interface_claimed(iface))
  47			continue;
  48		err = snd_usb_create_quirk(chip, iface, driver, quirk);
  49		if (err < 0)
  50			return err;
  51	}
  52
  53	for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
  54		iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
  55		if (!iface)
  56			continue;
  57		if (quirk->ifnum != probed_ifnum &&
  58		    !usb_interface_claimed(iface)) {
  59			err = usb_driver_claim_interface(driver, iface,
  60							 USB_AUDIO_IFACE_UNUSED);
  61			if (err < 0)
  62				return err;
  63		}
  64	}
  65
  66	return 0;
  67}
  68
  69static int ignore_interface_quirk(struct snd_usb_audio *chip,
  70				  struct usb_interface *iface,
  71				  struct usb_driver *driver,
  72				  const struct snd_usb_audio_quirk *quirk)
  73{
  74	return 0;
  75}
  76
  77
  78/*
  79 * Allow alignment on audio sub-slot (channel samples) rather than
  80 * on audio slots (audio frames)
  81 */
  82static int create_align_transfer_quirk(struct snd_usb_audio *chip,
  83				       struct usb_interface *iface,
  84				       struct usb_driver *driver,
  85				       const struct snd_usb_audio_quirk *quirk)
  86{
  87	chip->txfr_quirk = 1;
  88	return 1;	/* Continue with creating streams and mixer */
  89}
  90
  91static int create_any_midi_quirk(struct snd_usb_audio *chip,
  92				 struct usb_interface *intf,
  93				 struct usb_driver *driver,
  94				 const struct snd_usb_audio_quirk *quirk)
  95{
  96	return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
  97}
  98
  99/*
 100 * create a stream for an interface with proper descriptors
 101 */
 102static int create_standard_audio_quirk(struct snd_usb_audio *chip,
 103				       struct usb_interface *iface,
 104				       struct usb_driver *driver,
 105				       const struct snd_usb_audio_quirk *quirk)
 106{
 107	struct usb_host_interface *alts;
 108	struct usb_interface_descriptor *altsd;
 109	int err;
 110
 111	if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */
 112		chip->tx_length_quirk = 1;
 113
 114	alts = &iface->altsetting[0];
 115	altsd = get_iface_desc(alts);
 116	err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
 117	if (err < 0) {
 118		usb_audio_err(chip, "cannot setup if %d: error %d\n",
 119			   altsd->bInterfaceNumber, err);
 120		return err;
 121	}
 122	/* reset the current interface */
 123	usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
 124	return 0;
 125}
 126
 127/* create the audio stream and the corresponding endpoints from the fixed
 128 * audioformat object; this is used for quirks with the fixed EPs
 129 */
 130static int add_audio_stream_from_fixed_fmt(struct snd_usb_audio *chip,
 131					   struct audioformat *fp)
 132{
 133	int stream, err;
 134
 135	stream = (fp->endpoint & USB_DIR_IN) ?
 136		SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
 137
 138	snd_usb_audioformat_set_sync_ep(chip, fp);
 139
 140	err = snd_usb_add_audio_stream(chip, stream, fp);
 141	if (err < 0)
 142		return err;
 143
 144	err = snd_usb_add_endpoint(chip, fp->endpoint,
 145				   SND_USB_ENDPOINT_TYPE_DATA);
 146	if (err < 0)
 147		return err;
 148
 149	if (fp->sync_ep) {
 150		err = snd_usb_add_endpoint(chip, fp->sync_ep,
 151					   fp->implicit_fb ?
 152					   SND_USB_ENDPOINT_TYPE_DATA :
 153					   SND_USB_ENDPOINT_TYPE_SYNC);
 154		if (err < 0)
 155			return err;
 156	}
 157
 158	return 0;
 159}
 160
 161/*
 162 * create a stream for an endpoint/altsetting without proper descriptors
 163 */
 164static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
 165				     struct usb_interface *iface,
 166				     struct usb_driver *driver,
 167				     const struct snd_usb_audio_quirk *quirk)
 168{
 169	struct audioformat *fp;
 170	struct usb_host_interface *alts;
 171	struct usb_interface_descriptor *altsd;
 172	unsigned *rate_table = NULL;
 173	int err;
 174
 175	fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
 176	if (!fp)
 177		return -ENOMEM;
 178
 179	INIT_LIST_HEAD(&fp->list);
 180	if (fp->nr_rates > MAX_NR_RATES) {
 181		kfree(fp);
 182		return -EINVAL;
 183	}
 184	if (fp->nr_rates > 0) {
 185		rate_table = kmemdup(fp->rate_table,
 186				     sizeof(int) * fp->nr_rates, GFP_KERNEL);
 187		if (!rate_table) {
 188			kfree(fp);
 189			return -ENOMEM;
 190		}
 191		fp->rate_table = rate_table;
 192	}
 193
 194	if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
 195	    fp->altset_idx >= iface->num_altsetting) {
 196		err = -EINVAL;
 197		goto error;
 198	}
 199	alts = &iface->altsetting[fp->altset_idx];
 200	altsd = get_iface_desc(alts);
 201	if (altsd->bNumEndpoints <= fp->ep_idx) {
 202		err = -EINVAL;
 203		goto error;
 204	}
 205
 206	fp->protocol = altsd->bInterfaceProtocol;
 207
 208	if (fp->datainterval == 0)
 209		fp->datainterval = snd_usb_parse_datainterval(chip, alts);
 210	if (fp->maxpacksize == 0)
 211		fp->maxpacksize = le16_to_cpu(get_endpoint(alts, fp->ep_idx)->wMaxPacketSize);
 212	if (!fp->fmt_type)
 213		fp->fmt_type = UAC_FORMAT_TYPE_I;
 214
 215	err = add_audio_stream_from_fixed_fmt(chip, fp);
 216	if (err < 0)
 217		goto error;
 218
 219	usb_set_interface(chip->dev, fp->iface, 0);
 220	snd_usb_init_pitch(chip, fp);
 221	snd_usb_init_sample_rate(chip, fp, fp->rate_max);
 222	return 0;
 223
 224 error:
 225	list_del(&fp->list); /* unlink for avoiding double-free */
 226	kfree(fp);
 227	kfree(rate_table);
 228	return err;
 229}
 230
 231static int create_auto_pcm_quirk(struct snd_usb_audio *chip,
 232				 struct usb_interface *iface,
 233				 struct usb_driver *driver)
 234{
 235	struct usb_host_interface *alts;
 236	struct usb_interface_descriptor *altsd;
 237	struct usb_endpoint_descriptor *epd;
 238	struct uac1_as_header_descriptor *ashd;
 239	struct uac_format_type_i_discrete_descriptor *fmtd;
 240
 241	/*
 242	 * Most Roland/Yamaha audio streaming interfaces have more or less
 243	 * standard descriptors, but older devices might lack descriptors, and
 244	 * future ones might change, so ensure that we fail silently if the
 245	 * interface doesn't look exactly right.
 246	 */
 247
 248	/* must have a non-zero altsetting for streaming */
 249	if (iface->num_altsetting < 2)
 250		return -ENODEV;
 251	alts = &iface->altsetting[1];
 252	altsd = get_iface_desc(alts);
 253
 254	/* must have an isochronous endpoint for streaming */
 255	if (altsd->bNumEndpoints < 1)
 256		return -ENODEV;
 257	epd = get_endpoint(alts, 0);
 258	if (!usb_endpoint_xfer_isoc(epd))
 259		return -ENODEV;
 260
 261	/* must have format descriptors */
 262	ashd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL,
 263				       UAC_AS_GENERAL);
 264	fmtd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL,
 265				       UAC_FORMAT_TYPE);
 266	if (!ashd || ashd->bLength < 7 ||
 267	    !fmtd || fmtd->bLength < 8)
 268		return -ENODEV;
 269
 270	return create_standard_audio_quirk(chip, iface, driver, NULL);
 271}
 272
 273static int create_yamaha_midi_quirk(struct snd_usb_audio *chip,
 274				    struct usb_interface *iface,
 275				    struct usb_driver *driver,
 276				    struct usb_host_interface *alts)
 277{
 278	static const struct snd_usb_audio_quirk yamaha_midi_quirk = {
 279		.type = QUIRK_MIDI_YAMAHA
 280	};
 281	struct usb_midi_in_jack_descriptor *injd;
 282	struct usb_midi_out_jack_descriptor *outjd;
 283
 284	/* must have some valid jack descriptors */
 285	injd = snd_usb_find_csint_desc(alts->extra, alts->extralen,
 286				       NULL, USB_MS_MIDI_IN_JACK);
 287	outjd = snd_usb_find_csint_desc(alts->extra, alts->extralen,
 288					NULL, USB_MS_MIDI_OUT_JACK);
 289	if (!injd && !outjd)
 290		return -ENODEV;
 291	if ((injd && !snd_usb_validate_midi_desc(injd)) ||
 292	    (outjd && !snd_usb_validate_midi_desc(outjd)))
 293		return -ENODEV;
 294	if (injd && (injd->bLength < 5 ||
 295		     (injd->bJackType != USB_MS_EMBEDDED &&
 296		      injd->bJackType != USB_MS_EXTERNAL)))
 297		return -ENODEV;
 298	if (outjd && (outjd->bLength < 6 ||
 299		      (outjd->bJackType != USB_MS_EMBEDDED &&
 300		       outjd->bJackType != USB_MS_EXTERNAL)))
 301		return -ENODEV;
 302	return create_any_midi_quirk(chip, iface, driver, &yamaha_midi_quirk);
 303}
 304
 305static int create_roland_midi_quirk(struct snd_usb_audio *chip,
 306				    struct usb_interface *iface,
 307				    struct usb_driver *driver,
 308				    struct usb_host_interface *alts)
 309{
 310	static const struct snd_usb_audio_quirk roland_midi_quirk = {
 311		.type = QUIRK_MIDI_ROLAND
 312	};
 313	u8 *roland_desc = NULL;
 314
 315	/* might have a vendor-specific descriptor <06 24 F1 02 ...> */
 316	for (;;) {
 317		roland_desc = snd_usb_find_csint_desc(alts->extra,
 318						      alts->extralen,
 319						      roland_desc, 0xf1);
 320		if (!roland_desc)
 321			return -ENODEV;
 322		if (roland_desc[0] < 6 || roland_desc[3] != 2)
 323			continue;
 324		return create_any_midi_quirk(chip, iface, driver,
 325					     &roland_midi_quirk);
 326	}
 327}
 328
 329static int create_std_midi_quirk(struct snd_usb_audio *chip,
 330				 struct usb_interface *iface,
 331				 struct usb_driver *driver,
 332				 struct usb_host_interface *alts)
 333{
 334	struct usb_ms_header_descriptor *mshd;
 335	struct usb_ms_endpoint_descriptor *msepd;
 336
 337	/* must have the MIDIStreaming interface header descriptor*/
 338	mshd = (struct usb_ms_header_descriptor *)alts->extra;
 339	if (alts->extralen < 7 ||
 340	    mshd->bLength < 7 ||
 341	    mshd->bDescriptorType != USB_DT_CS_INTERFACE ||
 342	    mshd->bDescriptorSubtype != USB_MS_HEADER)
 343		return -ENODEV;
 344	/* must have the MIDIStreaming endpoint descriptor*/
 345	msepd = (struct usb_ms_endpoint_descriptor *)alts->endpoint[0].extra;
 346	if (alts->endpoint[0].extralen < 4 ||
 347	    msepd->bLength < 4 ||
 348	    msepd->bDescriptorType != USB_DT_CS_ENDPOINT ||
 349	    msepd->bDescriptorSubtype != UAC_MS_GENERAL ||
 350	    msepd->bNumEmbMIDIJack < 1 ||
 351	    msepd->bNumEmbMIDIJack > 16)
 352		return -ENODEV;
 353
 354	return create_any_midi_quirk(chip, iface, driver, NULL);
 355}
 356
 357static int create_auto_midi_quirk(struct snd_usb_audio *chip,
 358				  struct usb_interface *iface,
 359				  struct usb_driver *driver)
 360{
 361	struct usb_host_interface *alts;
 362	struct usb_interface_descriptor *altsd;
 363	struct usb_endpoint_descriptor *epd;
 364	int err;
 365
 366	alts = &iface->altsetting[0];
 367	altsd = get_iface_desc(alts);
 368
 369	/* must have at least one bulk/interrupt endpoint for streaming */
 370	if (altsd->bNumEndpoints < 1)
 371		return -ENODEV;
 372	epd = get_endpoint(alts, 0);
 373	if (!usb_endpoint_xfer_bulk(epd) &&
 374	    !usb_endpoint_xfer_int(epd))
 375		return -ENODEV;
 376
 377	switch (USB_ID_VENDOR(chip->usb_id)) {
 378	case 0x0499: /* Yamaha */
 379		err = create_yamaha_midi_quirk(chip, iface, driver, alts);
 380		if (err != -ENODEV)
 381			return err;
 382		break;
 383	case 0x0582: /* Roland */
 384		err = create_roland_midi_quirk(chip, iface, driver, alts);
 385		if (err != -ENODEV)
 386			return err;
 387		break;
 388	}
 389
 390	return create_std_midi_quirk(chip, iface, driver, alts);
 391}
 392
 393static int create_autodetect_quirk(struct snd_usb_audio *chip,
 394				   struct usb_interface *iface,
 395				   struct usb_driver *driver)
 
 396{
 397	int err;
 398
 399	err = create_auto_pcm_quirk(chip, iface, driver);
 400	if (err == -ENODEV)
 401		err = create_auto_midi_quirk(chip, iface, driver);
 402	return err;
 403}
 404
 405static int create_autodetect_quirks(struct snd_usb_audio *chip,
 406				    struct usb_interface *iface,
 407				    struct usb_driver *driver,
 408				    const struct snd_usb_audio_quirk *quirk)
 409{
 410	int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
 411	int ifcount, ifnum, err;
 412
 413	err = create_autodetect_quirk(chip, iface, driver);
 414	if (err < 0)
 415		return err;
 416
 417	/*
 418	 * ALSA PCM playback/capture devices cannot be registered in two steps,
 419	 * so we have to claim the other corresponding interface here.
 420	 */
 421	ifcount = chip->dev->actconfig->desc.bNumInterfaces;
 422	for (ifnum = 0; ifnum < ifcount; ifnum++) {
 423		if (ifnum == probed_ifnum || quirk->ifnum >= 0)
 424			continue;
 425		iface = usb_ifnum_to_if(chip->dev, ifnum);
 426		if (!iface ||
 427		    usb_interface_claimed(iface) ||
 428		    get_iface_desc(iface->altsetting)->bInterfaceClass !=
 429							USB_CLASS_VENDOR_SPEC)
 430			continue;
 431
 432		err = create_autodetect_quirk(chip, iface, driver);
 433		if (err >= 0) {
 434			err = usb_driver_claim_interface(driver, iface,
 435							 USB_AUDIO_IFACE_UNUSED);
 436			if (err < 0)
 437				return err;
 438		}
 439	}
 440
 441	return 0;
 442}
 443
 444/*
 445 * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.  
 446 * The only way to detect the sample rate is by looking at wMaxPacketSize.
 447 */
 448static int create_uaxx_quirk(struct snd_usb_audio *chip,
 449			     struct usb_interface *iface,
 450			     struct usb_driver *driver,
 451			     const struct snd_usb_audio_quirk *quirk)
 452{
 453	static const struct audioformat ua_format = {
 454		.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 455		.channels = 2,
 456		.fmt_type = UAC_FORMAT_TYPE_I,
 457		.altsetting = 1,
 458		.altset_idx = 1,
 459		.rates = SNDRV_PCM_RATE_CONTINUOUS,
 460	};
 461	struct usb_host_interface *alts;
 462	struct usb_interface_descriptor *altsd;
 463	struct audioformat *fp;
 464	int err;
 465
 466	/* both PCM and MIDI interfaces have 2 or more altsettings */
 467	if (iface->num_altsetting < 2)
 468		return -ENXIO;
 469	alts = &iface->altsetting[1];
 470	altsd = get_iface_desc(alts);
 471
 472	if (altsd->bNumEndpoints == 2) {
 473		static const struct snd_usb_midi_endpoint_info ua700_ep = {
 474			.out_cables = 0x0003,
 475			.in_cables  = 0x0003
 476		};
 477		static const struct snd_usb_audio_quirk ua700_quirk = {
 478			.type = QUIRK_MIDI_FIXED_ENDPOINT,
 479			.data = &ua700_ep
 480		};
 481		static const struct snd_usb_midi_endpoint_info uaxx_ep = {
 482			.out_cables = 0x0001,
 483			.in_cables  = 0x0001
 484		};
 485		static const struct snd_usb_audio_quirk uaxx_quirk = {
 486			.type = QUIRK_MIDI_FIXED_ENDPOINT,
 487			.data = &uaxx_ep
 488		};
 489		const struct snd_usb_audio_quirk *quirk =
 490			chip->usb_id == USB_ID(0x0582, 0x002b)
 491			? &ua700_quirk : &uaxx_quirk;
 492		return __snd_usbmidi_create(chip->card, iface,
 493					  &chip->midi_list, quirk,
 494					  chip->usb_id);
 
 495	}
 496
 497	if (altsd->bNumEndpoints != 1)
 498		return -ENXIO;
 499
 500	fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
 501	if (!fp)
 502		return -ENOMEM;
 503
 504	fp->iface = altsd->bInterfaceNumber;
 505	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
 506	fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
 507	fp->datainterval = 0;
 508	fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
 509	INIT_LIST_HEAD(&fp->list);
 510
 511	switch (fp->maxpacksize) {
 512	case 0x120:
 513		fp->rate_max = fp->rate_min = 44100;
 514		break;
 515	case 0x138:
 516	case 0x140:
 517		fp->rate_max = fp->rate_min = 48000;
 518		break;
 519	case 0x258:
 520	case 0x260:
 521		fp->rate_max = fp->rate_min = 96000;
 522		break;
 523	default:
 524		usb_audio_err(chip, "unknown sample rate\n");
 525		kfree(fp);
 526		return -ENXIO;
 527	}
 528
 529	err = add_audio_stream_from_fixed_fmt(chip, fp);
 530	if (err < 0) {
 531		list_del(&fp->list); /* unlink for avoiding double-free */
 532		kfree(fp);
 533		return err;
 534	}
 535	usb_set_interface(chip->dev, fp->iface, 0);
 536	return 0;
 537}
 538
 539/*
 540 * Create a standard mixer for the specified interface.
 541 */
 542static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
 543				       struct usb_interface *iface,
 544				       struct usb_driver *driver,
 545				       const struct snd_usb_audio_quirk *quirk)
 546{
 547	if (quirk->ifnum < 0)
 548		return 0;
 549
 550	return snd_usb_create_mixer(chip, quirk->ifnum, 0);
 551}
 552
 553static int setup_disable_autosuspend(struct snd_usb_audio *chip,
 554				       struct usb_interface *iface,
 555				       struct usb_driver *driver,
 556				       const struct snd_usb_audio_quirk *quirk)
 557{
 558	usb_disable_autosuspend(interface_to_usbdev(iface));
 559	return 1;	/* Continue with creating streams and mixer */
 560}
 561
 562/*
 563 * audio-interface quirks
 564 *
 565 * returns zero if no standard audio/MIDI parsing is needed.
 566 * returns a positive value if standard audio/midi interfaces are parsed
 567 * after this.
 568 * returns a negative value at error.
 569 */
 570int snd_usb_create_quirk(struct snd_usb_audio *chip,
 571			 struct usb_interface *iface,
 572			 struct usb_driver *driver,
 573			 const struct snd_usb_audio_quirk *quirk)
 574{
 575	typedef int (*quirk_func_t)(struct snd_usb_audio *,
 576				    struct usb_interface *,
 577				    struct usb_driver *,
 578				    const struct snd_usb_audio_quirk *);
 579	static const quirk_func_t quirk_funcs[] = {
 580		[QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
 581		[QUIRK_COMPOSITE] = create_composite_quirk,
 582		[QUIRK_AUTODETECT] = create_autodetect_quirks,
 583		[QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
 584		[QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
 585		[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
 586		[QUIRK_MIDI_ROLAND] = create_any_midi_quirk,
 587		[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
 588		[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
 589		[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
 590		[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
 591		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 592		[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
 593		[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
 594		[QUIRK_MIDI_CH345] = create_any_midi_quirk,
 595		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 596		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
 597		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
 598		[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
 599		[QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
 600		[QUIRK_SETUP_DISABLE_AUTOSUSPEND] = setup_disable_autosuspend,
 601	};
 602
 603	if (quirk->type < QUIRK_TYPE_COUNT) {
 604		return quirk_funcs[quirk->type](chip, iface, driver, quirk);
 605	} else {
 606		usb_audio_err(chip, "invalid quirk type %d\n", quirk->type);
 607		return -ENXIO;
 608	}
 609}
 610
 611/*
 612 * boot quirks
 613 */
 614
 615#define EXTIGY_FIRMWARE_SIZE_OLD 794
 616#define EXTIGY_FIRMWARE_SIZE_NEW 483
 617
 618static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
 619{
 620	struct usb_host_config *config = dev->actconfig;
 621	int err;
 622
 623	if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
 624	    le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
 625		dev_dbg(&dev->dev, "sending Extigy boot sequence...\n");
 626		/* Send message to force it to reconnect with full interface. */
 627		err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
 628				      0x10, 0x43, 0x0001, 0x000a, NULL, 0);
 629		if (err < 0)
 630			dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
 631		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
 632				&dev->descriptor, sizeof(dev->descriptor));
 633		config = dev->actconfig;
 634		if (err < 0)
 635			dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
 636		err = usb_reset_configuration(dev);
 637		if (err < 0)
 638			dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
 639		dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n",
 640			    le16_to_cpu(get_cfg_desc(config)->wTotalLength));
 641		return -ENODEV; /* quit this anyway */
 642	}
 643	return 0;
 644}
 645
 646static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
 647{
 648	u8 buf = 1;
 649
 650	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
 651			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
 652			0, 0, &buf, 1);
 653	if (buf == 0) {
 654		snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
 655				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
 656				1, 2000, NULL, 0);
 657		return -ENODEV;
 658	}
 659	return 0;
 660}
 661
 662static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
 663{
 664	int err;
 665
 666	if (dev->actconfig->desc.bConfigurationValue == 1) {
 667		dev_info(&dev->dev,
 668			   "Fast Track Pro switching to config #2\n");
 669		/* This function has to be available by the usb core module.
 670		 * if it is not avialable the boot quirk has to be left out
 671		 * and the configuration has to be set by udev or hotplug
 672		 * rules
 673		 */
 674		err = usb_driver_set_configuration(dev, 2);
 675		if (err < 0)
 676			dev_dbg(&dev->dev,
 677				"error usb_driver_set_configuration: %d\n",
 678				err);
 679		/* Always return an error, so that we stop creating a device
 680		   that will just be destroyed and recreated with a new
 681		   configuration */
 682		return -ENODEV;
 683	} else
 684		dev_info(&dev->dev, "Fast Track Pro config OK\n");
 685
 686	return 0;
 687}
 688
 689/*
 690 * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
 691 * documented in the device's data sheet.
 692 */
 693static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
 694{
 695	u8 buf[4];
 696	buf[0] = 0x20;
 697	buf[1] = value & 0xff;
 698	buf[2] = (value >> 8) & 0xff;
 699	buf[3] = reg;
 700	return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
 701			       USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
 702			       0, 0, &buf, 4);
 703}
 704
 705static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
 706{
 707	/*
 708	 * Enable line-out driver mode, set headphone source to front
 709	 * channels, enable stereo mic.
 710	 */
 711	return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
 712}
 713
 714/*
 715 * CM6206 registers from the CM6206 datasheet rev 2.1
 716 */
 717#define CM6206_REG0_DMA_MASTER BIT(15)
 718#define CM6206_REG0_SPDIFO_RATE_48K (2 << 12)
 719#define CM6206_REG0_SPDIFO_RATE_96K (7 << 12)
 720/* Bit 4 thru 11 is the S/PDIF category code */
 721#define CM6206_REG0_SPDIFO_CAT_CODE_GENERAL (0 << 4)
 722#define CM6206_REG0_SPDIFO_EMPHASIS_CD BIT(3)
 723#define CM6206_REG0_SPDIFO_COPYRIGHT_NA BIT(2)
 724#define CM6206_REG0_SPDIFO_NON_AUDIO BIT(1)
 725#define CM6206_REG0_SPDIFO_PRO_FORMAT BIT(0)
 726
 727#define CM6206_REG1_TEST_SEL_CLK BIT(14)
 728#define CM6206_REG1_PLLBIN_EN BIT(13)
 729#define CM6206_REG1_SOFT_MUTE_EN BIT(12)
 730#define CM6206_REG1_GPIO4_OUT BIT(11)
 731#define CM6206_REG1_GPIO4_OE BIT(10)
 732#define CM6206_REG1_GPIO3_OUT BIT(9)
 733#define CM6206_REG1_GPIO3_OE BIT(8)
 734#define CM6206_REG1_GPIO2_OUT BIT(7)
 735#define CM6206_REG1_GPIO2_OE BIT(6)
 736#define CM6206_REG1_GPIO1_OUT BIT(5)
 737#define CM6206_REG1_GPIO1_OE BIT(4)
 738#define CM6206_REG1_SPDIFO_INVALID BIT(3)
 739#define CM6206_REG1_SPDIF_LOOP_EN BIT(2)
 740#define CM6206_REG1_SPDIFO_DIS BIT(1)
 741#define CM6206_REG1_SPDIFI_MIX BIT(0)
 742
 743#define CM6206_REG2_DRIVER_ON BIT(15)
 744#define CM6206_REG2_HEADP_SEL_SIDE_CHANNELS (0 << 13)
 745#define CM6206_REG2_HEADP_SEL_SURROUND_CHANNELS (1 << 13)
 746#define CM6206_REG2_HEADP_SEL_CENTER_SUBW (2 << 13)
 747#define CM6206_REG2_HEADP_SEL_FRONT_CHANNELS (3 << 13)
 748#define CM6206_REG2_MUTE_HEADPHONE_RIGHT BIT(12)
 749#define CM6206_REG2_MUTE_HEADPHONE_LEFT BIT(11)
 750#define CM6206_REG2_MUTE_REAR_SURROUND_RIGHT BIT(10)
 751#define CM6206_REG2_MUTE_REAR_SURROUND_LEFT BIT(9)
 752#define CM6206_REG2_MUTE_SIDE_SURROUND_RIGHT BIT(8)
 753#define CM6206_REG2_MUTE_SIDE_SURROUND_LEFT BIT(7)
 754#define CM6206_REG2_MUTE_SUBWOOFER BIT(6)
 755#define CM6206_REG2_MUTE_CENTER BIT(5)
 756#define CM6206_REG2_MUTE_RIGHT_FRONT BIT(3)
 757#define CM6206_REG2_MUTE_LEFT_FRONT BIT(3)
 758#define CM6206_REG2_EN_BTL BIT(2)
 759#define CM6206_REG2_MCUCLKSEL_1_5_MHZ (0)
 760#define CM6206_REG2_MCUCLKSEL_3_MHZ (1)
 761#define CM6206_REG2_MCUCLKSEL_6_MHZ (2)
 762#define CM6206_REG2_MCUCLKSEL_12_MHZ (3)
 763
 764/* Bit 11..13 sets the sensitivity to FLY tuner volume control VP/VD signal */
 765#define CM6206_REG3_FLYSPEED_DEFAULT (2 << 11)
 766#define CM6206_REG3_VRAP25EN BIT(10)
 767#define CM6206_REG3_MSEL1 BIT(9)
 768#define CM6206_REG3_SPDIFI_RATE_44_1K BIT(0 << 7)
 769#define CM6206_REG3_SPDIFI_RATE_48K BIT(2 << 7)
 770#define CM6206_REG3_SPDIFI_RATE_32K BIT(3 << 7)
 771#define CM6206_REG3_PINSEL BIT(6)
 772#define CM6206_REG3_FOE BIT(5)
 773#define CM6206_REG3_ROE BIT(4)
 774#define CM6206_REG3_CBOE BIT(3)
 775#define CM6206_REG3_LOSE BIT(2)
 776#define CM6206_REG3_HPOE BIT(1)
 777#define CM6206_REG3_SPDIFI_CANREC BIT(0)
 778
 779#define CM6206_REG5_DA_RSTN BIT(13)
 780#define CM6206_REG5_AD_RSTN BIT(12)
 781#define CM6206_REG5_SPDIFO_AD2SPDO BIT(12)
 782#define CM6206_REG5_SPDIFO_SEL_FRONT (0 << 9)
 783#define CM6206_REG5_SPDIFO_SEL_SIDE_SUR (1 << 9)
 784#define CM6206_REG5_SPDIFO_SEL_CEN_LFE (2 << 9)
 785#define CM6206_REG5_SPDIFO_SEL_REAR_SUR (3 << 9)
 786#define CM6206_REG5_CODECM BIT(8)
 787#define CM6206_REG5_EN_HPF BIT(7)
 788#define CM6206_REG5_T_SEL_DSDA4 BIT(6)
 789#define CM6206_REG5_T_SEL_DSDA3 BIT(5)
 790#define CM6206_REG5_T_SEL_DSDA2 BIT(4)
 791#define CM6206_REG5_T_SEL_DSDA1 BIT(3)
 792#define CM6206_REG5_T_SEL_DSDAD_NORMAL 0
 793#define CM6206_REG5_T_SEL_DSDAD_FRONT 4
 794#define CM6206_REG5_T_SEL_DSDAD_S_SURROUND 5
 795#define CM6206_REG5_T_SEL_DSDAD_CEN_LFE 6
 796#define CM6206_REG5_T_SEL_DSDAD_R_SURROUND 7
 797
 798static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
 799{
 800	int err  = 0, reg;
 801	int val[] = {
 802		/*
 803		 * Values here are chosen based on sniffing USB traffic
 804		 * under Windows.
 805		 *
 806		 * REG0: DAC is master, sample rate 48kHz, no copyright
 807		 */
 808		CM6206_REG0_SPDIFO_RATE_48K |
 809		CM6206_REG0_SPDIFO_COPYRIGHT_NA,
 810		/*
 811		 * REG1: PLL binary search enable, soft mute enable.
 812		 */
 813		CM6206_REG1_PLLBIN_EN |
 814		CM6206_REG1_SOFT_MUTE_EN,
 815		/*
 816		 * REG2: enable output drivers,
 817		 * select front channels to the headphone output,
 818		 * then mute the headphone channels, run the MCU
 819		 * at 1.5 MHz.
 820		 */
 821		CM6206_REG2_DRIVER_ON |
 822		CM6206_REG2_HEADP_SEL_FRONT_CHANNELS |
 823		CM6206_REG2_MUTE_HEADPHONE_RIGHT |
 824		CM6206_REG2_MUTE_HEADPHONE_LEFT,
 825		/*
 826		 * REG3: default flyspeed, set 2.5V mic bias
 827		 * enable all line out ports and enable SPDIF
 828		 */
 829		CM6206_REG3_FLYSPEED_DEFAULT |
 830		CM6206_REG3_VRAP25EN |
 831		CM6206_REG3_FOE |
 832		CM6206_REG3_ROE |
 833		CM6206_REG3_CBOE |
 834		CM6206_REG3_LOSE |
 835		CM6206_REG3_HPOE |
 836		CM6206_REG3_SPDIFI_CANREC,
 837		/* REG4 is just a bunch of GPIO lines */
 838		0x0000,
 839		/* REG5: de-assert AD/DA reset signals */
 840		CM6206_REG5_DA_RSTN |
 841		CM6206_REG5_AD_RSTN };
 842
 843	for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
 844		err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
 845		if (err < 0)
 846			return err;
 847	}
 848
 849	return err;
 850}
 851
 852/* quirk for Plantronics GameCom 780 with CM6302 chip */
 853static int snd_usb_gamecon780_boot_quirk(struct usb_device *dev)
 854{
 855	/* set the initial volume and don't change; other values are either
 856	 * too loud or silent due to firmware bug (bko#65251)
 857	 */
 858	u8 buf[2] = { 0x74, 0xe3 };
 859	return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
 860			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
 861			UAC_FU_VOLUME << 8, 9 << 8, buf, 2);
 862}
 863
 864/*
 865 * Novation Twitch DJ controller
 866 * Focusrite Novation Saffire 6 USB audio card
 867 */
 868static int snd_usb_novation_boot_quirk(struct usb_device *dev)
 869{
 870	/* preemptively set up the device because otherwise the
 871	 * raw MIDI endpoints are not active */
 872	usb_set_interface(dev, 0, 1);
 873	return 0;
 874}
 875
 876/*
 877 * This call will put the synth in "USB send" mode, i.e it will send MIDI
 878 * messages through USB (this is disabled at startup). The synth will
 879 * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
 880 * sign on its LCD. Values here are chosen based on sniffing USB traffic
 881 * under Windows.
 882 */
 883static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
 884{
 885	int err, actual_length;
 886	/* "midi send" enable */
 887	static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
 888	void *buf;
 889
 890	if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x05)))
 891		return -EINVAL;
 892	buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
 893	if (!buf)
 894		return -ENOMEM;
 895	err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
 896			ARRAY_SIZE(seq), &actual_length, 1000);
 897	kfree(buf);
 898	if (err < 0)
 899		return err;
 900
 901	return 0;
 902}
 903
 904/*
 905 * Some sound cards from Native Instruments are in fact compliant to the USB
 906 * audio standard of version 2 and other approved USB standards, even though
 907 * they come up as vendor-specific device when first connected.
 908 *
 909 * However, they can be told to come up with a new set of descriptors
 910 * upon their next enumeration, and the interfaces announced by the new
 911 * descriptors will then be handled by the kernel's class drivers. As the
 912 * product ID will also change, no further checks are required.
 913 */
 914
 915static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
 916{
 917	int ret;
 918
 919	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 920				  0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 921				  1, 0, NULL, 0, 1000);
 922
 923	if (ret < 0)
 924		return ret;
 925
 926	usb_reset_device(dev);
 927
 928	/* return -EAGAIN, so the creation of an audio interface for this
 929	 * temporary device is aborted. The device will reconnect with a
 930	 * new product ID */
 931	return -EAGAIN;
 932}
 933
 934static void mbox2_setup_48_24_magic(struct usb_device *dev)
 935{
 936	u8 srate[3];
 937	u8 temp[12];
 938
 939	/* Choose 48000Hz permanently */
 940	srate[0] = 0x80;
 941	srate[1] = 0xbb;
 942	srate[2] = 0x00;
 943
 944	/* Send the magic! */
 945	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
 946		0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
 947	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
 948		0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
 949	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
 950		0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
 951	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
 952		0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
 953	return;
 954}
 955
 956/* Digidesign Mbox 2 needs to load firmware onboard
 957 * and driver must wait a few seconds for initialisation.
 958 */
 959
 960#define MBOX2_FIRMWARE_SIZE    646
 961#define MBOX2_BOOT_LOADING     0x01 /* Hard coded into the device */
 962#define MBOX2_BOOT_READY       0x02 /* Hard coded into the device */
 963
 964static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
 965{
 966	struct usb_host_config *config = dev->actconfig;
 967	int err;
 968	u8 bootresponse[0x12];
 969	int fwsize;
 970	int count;
 971
 972	fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
 973
 974	if (fwsize != MBOX2_FIRMWARE_SIZE) {
 975		dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize);
 976		return -ENODEV;
 977	}
 978
 979	dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n");
 980
 981	count = 0;
 982	bootresponse[0] = MBOX2_BOOT_LOADING;
 983	while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) {
 984		msleep(500); /* 0.5 second delay */
 985		snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
 986			/* Control magic - load onboard firmware */
 987			0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
 988		if (bootresponse[0] == MBOX2_BOOT_READY)
 989			break;
 990		dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n");
 991		count++;
 992	}
 993
 994	if (bootresponse[0] != MBOX2_BOOT_READY) {
 995		dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
 996		return -ENODEV;
 997	}
 998
 999	dev_dbg(&dev->dev, "device initialised!\n");
1000
1001	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
1002		&dev->descriptor, sizeof(dev->descriptor));
1003	config = dev->actconfig;
1004	if (err < 0)
1005		dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
1006
1007	err = usb_reset_configuration(dev);
1008	if (err < 0)
1009		dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
1010	dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n",
1011		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
1012
1013	mbox2_setup_48_24_magic(dev);
1014
1015	dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz");
1016
1017	return 0; /* Successful boot */
1018}
1019
1020static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
1021{
1022	int err;
1023
1024	dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n");
1025
1026	/* If the Axe-Fx III has not fully booted, it will timeout when trying
1027	 * to enable the audio streaming interface. A more generous timeout is
1028	 * used here to detect when the Axe-Fx III has finished booting as the
1029	 * set interface message will be acked once it has
1030	 */
1031	err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1032				USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
1033				1, 1, NULL, 0, 120000);
1034	if (err < 0) {
1035		dev_err(&dev->dev,
1036			"failed waiting for Axe-Fx III to boot: %d\n", err);
1037		return err;
1038	}
1039
1040	dev_dbg(&dev->dev, "Axe-Fx III is now ready\n");
1041
1042	err = usb_set_interface(dev, 1, 0);
1043	if (err < 0)
1044		dev_dbg(&dev->dev,
1045			"error stopping Axe-Fx III interface: %d\n", err);
1046
1047	return 0;
1048}
1049
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1050
1051#define MICROBOOK_BUF_SIZE 128
1052
1053static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf,
1054						int buf_size, int *length)
1055{
1056	int err, actual_length;
1057
1058	if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x01)))
1059		return -EINVAL;
1060	err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length,
1061				&actual_length, 1000);
1062	if (err < 0)
1063		return err;
1064
1065	print_hex_dump(KERN_DEBUG, "MicroBookII snd: ", DUMP_PREFIX_NONE, 16, 1,
1066		       buf, actual_length, false);
1067
1068	memset(buf, 0, buf_size);
1069
1070	if (usb_pipe_type_check(dev, usb_rcvintpipe(dev, 0x82)))
1071		return -EINVAL;
1072	err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size,
1073				&actual_length, 1000);
1074	if (err < 0)
1075		return err;
1076
1077	print_hex_dump(KERN_DEBUG, "MicroBookII rcv: ", DUMP_PREFIX_NONE, 16, 1,
1078		       buf, actual_length, false);
1079
1080	*length = actual_length;
1081	return 0;
1082}
1083
1084static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
1085{
1086	int err, actual_length, poll_attempts = 0;
1087	static const u8 set_samplerate_seq[] = { 0x00, 0x00, 0x00, 0x00,
1088						 0x00, 0x00, 0x0b, 0x14,
1089						 0x00, 0x00, 0x00, 0x01 };
1090	static const u8 poll_ready_seq[] = { 0x00, 0x04, 0x00, 0x00,
1091					     0x00, 0x00, 0x0b, 0x18 };
1092	u8 *buf = kzalloc(MICROBOOK_BUF_SIZE, GFP_KERNEL);
1093
1094	if (!buf)
1095		return -ENOMEM;
1096
1097	dev_info(&dev->dev, "Waiting for MOTU Microbook II to boot up...\n");
1098
1099	/* First we tell the device which sample rate to use. */
1100	memcpy(buf, set_samplerate_seq, sizeof(set_samplerate_seq));
1101	actual_length = sizeof(set_samplerate_seq);
1102	err = snd_usb_motu_microbookii_communicate(dev, buf, MICROBOOK_BUF_SIZE,
1103						   &actual_length);
1104
1105	if (err < 0) {
1106		dev_err(&dev->dev,
1107			"failed setting the sample rate for Motu MicroBook II: %d\n",
1108			err);
1109		goto free_buf;
1110	}
1111
1112	/* Then we poll every 100 ms until the device informs of its readiness. */
1113	while (true) {
1114		if (++poll_attempts > 100) {
1115			dev_err(&dev->dev,
1116				"failed booting Motu MicroBook II: timeout\n");
1117			err = -ENODEV;
1118			goto free_buf;
1119		}
1120
1121		memset(buf, 0, MICROBOOK_BUF_SIZE);
1122		memcpy(buf, poll_ready_seq, sizeof(poll_ready_seq));
1123
1124		actual_length = sizeof(poll_ready_seq);
1125		err = snd_usb_motu_microbookii_communicate(
1126			dev, buf, MICROBOOK_BUF_SIZE, &actual_length);
1127		if (err < 0) {
1128			dev_err(&dev->dev,
1129				"failed booting Motu MicroBook II: communication error %d\n",
1130				err);
1131			goto free_buf;
1132		}
1133
1134		/* the device signals its readiness through a message of the
1135		 * form
1136		 *           XX 06 00 00 00 00 0b 18  00 00 00 01
1137		 * If the device is not yet ready to accept audio data, the
1138		 * last byte of that sequence is 00.
1139		 */
1140		if (actual_length == 12 && buf[actual_length - 1] == 1)
1141			break;
1142
1143		msleep(100);
1144	}
1145
1146	dev_info(&dev->dev, "MOTU MicroBook II ready\n");
1147
1148free_buf:
1149	kfree(buf);
1150	return err;
1151}
1152
1153static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
1154{
1155	msleep(2000);
1156
1157	return 0;
1158}
1159
1160/*
1161 * Setup quirks
1162 */
1163#define MAUDIO_SET		0x01 /* parse device_setup */
1164#define MAUDIO_SET_COMPATIBLE	0x80 /* use only "win-compatible" interfaces */
1165#define MAUDIO_SET_DTS		0x02 /* enable DTS Digital Output */
1166#define MAUDIO_SET_96K		0x04 /* 48-96kHz rate if set, 8-48kHz otherwise */
1167#define MAUDIO_SET_24B		0x08 /* 24bits sample if set, 16bits otherwise */
1168#define MAUDIO_SET_DI		0x10 /* enable Digital Input */
1169#define MAUDIO_SET_MASK		0x1f /* bit mask for setup value */
1170#define MAUDIO_SET_24B_48K_DI	 0x19 /* 24bits+48kHz+Digital Input */
1171#define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48kHz+No Digital Input */
1172#define MAUDIO_SET_16B_48K_DI	 0x11 /* 16bits+48kHz+Digital Input */
1173#define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48kHz+No Digital Input */
1174
1175static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
1176				      int iface, int altno)
1177{
1178	/* Reset ALL ifaces to 0 altsetting.
1179	 * Call it for every possible altsetting of every interface.
1180	 */
1181	usb_set_interface(chip->dev, iface, 0);
1182	if (chip->setup & MAUDIO_SET) {
1183		if (chip->setup & MAUDIO_SET_COMPATIBLE) {
1184			if (iface != 1 && iface != 2)
1185				return 1; /* skip all interfaces but 1 and 2 */
1186		} else {
1187			unsigned int mask;
1188			if (iface == 1 || iface == 2)
1189				return 1; /* skip interfaces 1 and 2 */
1190			if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
1191				return 1; /* skip this altsetting */
1192			mask = chip->setup & MAUDIO_SET_MASK;
1193			if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
1194				return 1; /* skip this altsetting */
1195			if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
1196				return 1; /* skip this altsetting */
1197			if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
1198				return 1; /* skip this altsetting */
1199		}
1200	}
1201	usb_audio_dbg(chip,
1202		    "using altsetting %d for interface %d config %d\n",
1203		    altno, iface, chip->setup);
1204	return 0; /* keep this altsetting */
1205}
1206
1207static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
1208					 int iface,
1209					 int altno)
1210{
1211	/* Reset ALL ifaces to 0 altsetting.
1212	 * Call it for every possible altsetting of every interface.
1213	 */
1214	usb_set_interface(chip->dev, iface, 0);
1215
1216	if (chip->setup & MAUDIO_SET) {
1217		unsigned int mask;
1218		if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
1219			return 1; /* skip this altsetting */
1220		if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
1221			return 1; /* skip this altsetting */
1222		mask = chip->setup & MAUDIO_SET_MASK;
1223		if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
1224			return 1; /* skip this altsetting */
1225		if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
1226			return 1; /* skip this altsetting */
1227		if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
1228			return 1; /* skip this altsetting */
1229		if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
1230			return 1; /* skip this altsetting */
1231	}
1232
1233	return 0; /* keep this altsetting */
1234}
1235
1236static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
1237					   int iface, int altno)
1238{
1239	/* Reset ALL ifaces to 0 altsetting.
1240	 * Call it for every possible altsetting of every interface.
1241	 */
1242	usb_set_interface(chip->dev, iface, 0);
1243
1244	/* possible configuration where both inputs and only one output is
1245	 *used is not supported by the current setup
1246	 */
1247	if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
1248		if (chip->setup & MAUDIO_SET_96K) {
1249			if (altno != 3 && altno != 6)
1250				return 1;
1251		} else if (chip->setup & MAUDIO_SET_DI) {
1252			if (iface == 4)
1253				return 1; /* no analog input */
1254			if (altno != 2 && altno != 5)
1255				return 1; /* enable only altsets 2 and 5 */
1256		} else {
1257			if (iface == 5)
1258				return 1; /* disable digialt input */
1259			if (altno != 2 && altno != 5)
1260				return 1; /* enalbe only altsets 2 and 5 */
1261		}
1262	} else {
1263		/* keep only 16-Bit mode */
1264		if (altno != 1)
1265			return 1;
1266	}
1267
1268	usb_audio_dbg(chip,
1269		    "using altsetting %d for interface %d config %d\n",
1270		    altno, iface, chip->setup);
1271	return 0; /* keep this altsetting */
1272}
1273
1274static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip,
1275					   int iface, int altno)
1276{
1277	/*
1278	 * Altno settings:
1279	 *
1280	 * Playback (Interface 1):
1281	 * 1: 6 Analog + 2 S/PDIF
1282	 * 2: 6 Analog + 2 S/PDIF
1283	 * 3: 6 Analog
1284	 *
1285	 * Capture (Interface 2):
1286	 * 1: 8 Analog + 2 S/PDIF + 8 ADAT
1287	 * 2: 8 Analog + 2 S/PDIF + 4 ADAT
1288	 * 3: 8 Analog
1289	 */
1290
1291	/*
1292	 * I'll leave 2 as the default one and
1293	 * use device_setup to switch to the
1294	 * other two.
1295	 */
1296	if ((chip->setup == 0 || chip->setup > 2) && altno != 2)
1297		return 1;
1298	else if (chip->setup == 1 && altno != 1)
1299		return 1;
1300	else if (chip->setup == 2 && altno != 3)
1301		return 1;
1302
1303	return 0;
1304}
1305
1306int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
1307				  int iface,
1308				  int altno)
1309{
1310	/* audiophile usb: skip altsets incompatible with device_setup */
1311	if (chip->usb_id == USB_ID(0x0763, 0x2003))
1312		return audiophile_skip_setting_quirk(chip, iface, altno);
1313	/* quattro usb: skip altsets incompatible with device_setup */
1314	if (chip->usb_id == USB_ID(0x0763, 0x2001))
1315		return quattro_skip_setting_quirk(chip, iface, altno);
1316	/* fasttrackpro usb: skip altsets incompatible with device_setup */
1317	if (chip->usb_id == USB_ID(0x0763, 0x2012))
1318		return fasttrackpro_skip_setting_quirk(chip, iface, altno);
1319	/* presonus studio 1810c: skip altsets incompatible with device_setup */
1320	if (chip->usb_id == USB_ID(0x0194f, 0x010c))
1321		return s1810c_skip_setting_quirk(chip, iface, altno);
1322
1323
1324	return 0;
1325}
1326
1327int snd_usb_apply_boot_quirk(struct usb_device *dev,
1328			     struct usb_interface *intf,
1329			     const struct snd_usb_audio_quirk *quirk,
1330			     unsigned int id)
1331{
1332	switch (id) {
1333	case USB_ID(0x041e, 0x3000):
1334		/* SB Extigy needs special boot-up sequence */
1335		/* if more models come, this will go to the quirk list. */
1336		return snd_usb_extigy_boot_quirk(dev, intf);
1337
1338	case USB_ID(0x041e, 0x3020):
1339		/* SB Audigy 2 NX needs its own boot-up magic, too */
1340		return snd_usb_audigy2nx_boot_quirk(dev);
1341
1342	case USB_ID(0x10f5, 0x0200):
1343		/* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
1344		return snd_usb_cm106_boot_quirk(dev);
1345
1346	case USB_ID(0x0d8c, 0x0102):
1347		/* C-Media CM6206 / CM106-Like Sound Device */
1348	case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
1349		return snd_usb_cm6206_boot_quirk(dev);
1350
1351	case USB_ID(0x0dba, 0x3000):
1352		/* Digidesign Mbox 2 */
1353		return snd_usb_mbox2_boot_quirk(dev);
 
 
 
 
1354
1355	case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
1356	case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */
1357		return snd_usb_novation_boot_quirk(dev);
1358
1359	case USB_ID(0x133e, 0x0815):
1360		/* Access Music VirusTI Desktop */
1361		return snd_usb_accessmusic_boot_quirk(dev);
1362
1363	case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
1364	case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
1365	case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
1366		return snd_usb_nativeinstruments_boot_quirk(dev);
1367	case USB_ID(0x0763, 0x2012):  /* M-Audio Fast Track Pro USB */
1368		return snd_usb_fasttrackpro_boot_quirk(dev);
1369	case USB_ID(0x047f, 0xc010): /* Plantronics Gamecom 780 */
1370		return snd_usb_gamecon780_boot_quirk(dev);
1371	case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */
1372		return snd_usb_axefx3_boot_quirk(dev);
1373	case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */
1374		/*
1375		 * For some reason interface 3 with vendor-spec class is
1376		 * detected on MicroBook IIc.
1377		 */
1378		if (get_iface_desc(intf->altsetting)->bInterfaceClass ==
1379		    USB_CLASS_VENDOR_SPEC &&
1380		    get_iface_desc(intf->altsetting)->bInterfaceNumber < 3)
1381			return snd_usb_motu_microbookii_boot_quirk(dev);
1382		break;
1383	}
1384
1385	return 0;
1386}
1387
1388int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
1389				  struct usb_interface *intf,
1390				  const struct snd_usb_audio_quirk *quirk,
1391				  unsigned int id)
1392{
1393	switch (id) {
1394	case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
1395		return snd_usb_motu_m_series_boot_quirk(dev);
1396	}
1397
1398	return 0;
1399}
1400
1401/*
1402 * check if the device uses big-endian samples
1403 */
1404int snd_usb_is_big_endian_format(struct snd_usb_audio *chip,
1405				 const struct audioformat *fp)
1406{
1407	/* it depends on altsetting whether the device is big-endian or not */
1408	switch (chip->usb_id) {
1409	case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
1410		if (fp->altsetting == 2 || fp->altsetting == 3 ||
1411			fp->altsetting == 5 || fp->altsetting == 6)
1412			return 1;
1413		break;
1414	case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
1415		if (chip->setup == 0x00 ||
1416			fp->altsetting == 1 || fp->altsetting == 2 ||
1417			fp->altsetting == 3)
1418			return 1;
1419		break;
1420	case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
1421		if (fp->altsetting == 2 || fp->altsetting == 3 ||
1422			fp->altsetting == 5 || fp->altsetting == 6)
1423			return 1;
1424		break;
1425	}
1426	return 0;
1427}
1428
1429/*
1430 * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
1431 * not for interface.
1432 */
1433
1434enum {
1435	EMU_QUIRK_SR_44100HZ = 0,
1436	EMU_QUIRK_SR_48000HZ,
1437	EMU_QUIRK_SR_88200HZ,
1438	EMU_QUIRK_SR_96000HZ,
1439	EMU_QUIRK_SR_176400HZ,
1440	EMU_QUIRK_SR_192000HZ
1441};
1442
1443static void set_format_emu_quirk(struct snd_usb_substream *subs,
1444				 const struct audioformat *fmt)
1445{
1446	unsigned char emu_samplerate_id = 0;
1447
1448	/* When capture is active
1449	 * sample rate shouldn't be changed
1450	 * by playback substream
1451	 */
1452	if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
1453		if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].cur_audiofmt)
1454			return;
1455	}
1456
1457	switch (fmt->rate_min) {
1458	case 48000:
1459		emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
1460		break;
1461	case 88200:
1462		emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
1463		break;
1464	case 96000:
1465		emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
1466		break;
1467	case 176400:
1468		emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
1469		break;
1470	case 192000:
1471		emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
1472		break;
1473	default:
1474		emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
1475		break;
1476	}
1477	snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
1478	subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
1479}
1480
1481static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs,
1482					u16 windex)
1483{
1484	unsigned int cur_rate = subs->data_endpoint->cur_rate;
1485	u8 sr[3];
1486	// Convert to little endian
1487	sr[0] = cur_rate & 0xff;
1488	sr[1] = (cur_rate >> 8) & 0xff;
1489	sr[2] = (cur_rate >> 16) & 0xff;
1490	usb_set_interface(subs->dev, 0, 1);
1491	// we should derive windex from fmt-sync_ep but it's not set
1492	snd_usb_ctl_msg(subs->stream->chip->dev,
1493		usb_sndctrlpipe(subs->stream->chip->dev, 0),
1494		0x01, 0x22, 0x0100, windex, &sr, 0x0003);
1495	return 0;
1496}
1497
1498void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
1499			      const struct audioformat *fmt)
1500{
1501	switch (subs->stream->chip->usb_id) {
1502	case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
1503	case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
1504	case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
1505	case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
1506		set_format_emu_quirk(subs, fmt);
1507		break;
 
1508	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
1509		subs->stream_offset_adj = 2;
1510		break;
1511	case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
1512		pioneer_djm_set_format_quirk(subs, 0x0082);
1513		break;
1514	case USB_ID(0x08e4, 0x017f): /* Pioneer DJM-750 */
1515	case USB_ID(0x08e4, 0x0163): /* Pioneer DJM-850 */
1516		pioneer_djm_set_format_quirk(subs, 0x0086);
1517		break;
1518	}
1519}
1520
1521bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip)
1522{
1523	/* devices which do not support reading the sample rate. */
1524	switch (chip->usb_id) {
1525	case USB_ID(0x041e, 0x4080): /* Creative Live Cam VF0610 */
1526	case USB_ID(0x04d8, 0xfeea): /* Benchmark DAC1 Pre */
1527	case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */
1528	case USB_ID(0x05a3, 0x9420): /* ELP HD USB Camera */
1529	case USB_ID(0x05a7, 0x1020): /* Bose Companion 5 */
1530	case USB_ID(0x074d, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
1531	case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */
1532	case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
1533	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
1534	case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
1535	case USB_ID(0x413c, 0xa506): /* Dell AE515 sound bar */
1536	case USB_ID(0x046d, 0x084c): /* Logitech ConferenceCam Connect */
1537		return true;
1538	}
1539
1540	/* devices of these vendors don't support reading rate, either */
1541	switch (USB_ID_VENDOR(chip->usb_id)) {
1542	case 0x045e: /* MS Lifecam */
1543	case 0x047f: /* Plantronics */
1544	case 0x1de7: /* Phoenix Audio */
1545		return true;
1546	}
1547
1548	return false;
1549}
1550
1551/* ITF-USB DSD based DACs need a vendor cmd to switch
1552 * between PCM and native DSD mode
1553 */
1554static bool is_itf_usb_dsd_dac(unsigned int id)
1555{
1556	switch (id) {
1557	case USB_ID(0x154e, 0x1002): /* Denon DCD-1500RE */
1558	case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */
1559	case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */
1560	case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */
1561	case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */
1562	case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-501V2/UD-503/NT-503 */
1563	case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */
1564	case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */
1565		return true;
1566	}
1567	return false;
1568}
1569
1570int snd_usb_select_mode_quirk(struct snd_usb_audio *chip,
1571			      const struct audioformat *fmt)
1572{
1573	struct usb_device *dev = chip->dev;
1574	int err;
1575
1576	if (is_itf_usb_dsd_dac(chip->usb_id)) {
1577		/* First switch to alt set 0, otherwise the mode switch cmd
1578		 * will not be accepted by the DAC
1579		 */
1580		err = usb_set_interface(dev, fmt->iface, 0);
1581		if (err < 0)
1582			return err;
1583
1584		msleep(20); /* Delay needed after setting the interface */
1585
1586		/* Vendor mode switch cmd is required. */
1587		if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) {
1588			/* DSD mode (DSD_U32) requested */
1589			err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
1590					      USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1591					      1, 1, NULL, 0);
1592			if (err < 0)
1593				return err;
1594
1595		} else {
1596			/* PCM or DOP mode (S32) requested */
1597			/* PCM mode (S16) requested */
1598			err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
1599					      USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1600					      0, 1, NULL, 0);
1601			if (err < 0)
1602				return err;
1603
1604		}
1605		msleep(20);
1606	}
1607	return 0;
1608}
1609
1610void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
1611{
1612	/*
1613	 * "Playback Design" products send bogus feedback data at the start
1614	 * of the stream. Ignore them.
1615	 */
1616	if (USB_ID_VENDOR(ep->chip->usb_id) == 0x23ba &&
1617	    ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
1618		ep->skip_packets = 4;
1619
1620	/*
1621	 * M-Audio Fast Track C400/C600 - when packets are not skipped, real
1622	 * world latency varies by approx. +/- 50 frames (at 96kHz) each time
1623	 * the stream is (re)started. When skipping packets 16 at endpoint
1624	 * start up, the real world latency is stable within +/- 1 frame (also
1625	 * across power cycles).
1626	 */
1627	if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) ||
1628	     ep->chip->usb_id == USB_ID(0x0763, 0x2031)) &&
1629	    ep->type == SND_USB_ENDPOINT_TYPE_DATA)
1630		ep->skip_packets = 16;
1631
1632	/* Work around devices that report unreasonable feedback data */
1633	if ((ep->chip->usb_id == USB_ID(0x0644, 0x8038) ||  /* TEAC UD-H01 */
1634	     ep->chip->usb_id == USB_ID(0x1852, 0x5034)) && /* T+A Dac8 */
1635	    ep->syncmaxsize == 4)
1636		ep->tenor_fb_quirk = 1;
1637}
1638
1639void snd_usb_set_interface_quirk(struct snd_usb_audio *chip)
1640{
1641	if (!chip)
1642		return;
1643	/*
1644	 * "Playback Design" products need a 50ms delay after setting the
1645	 * USB interface.
1646	 */
1647	switch (USB_ID_VENDOR(chip->usb_id)) {
1648	case 0x23ba: /* Playback Design */
1649	case 0x0644: /* TEAC Corp. */
1650		msleep(50);
1651		break;
1652	}
1653}
1654
1655/* quirk applied after snd_usb_ctl_msg(); not applied during boot quirks */
1656void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
1657			   __u8 request, __u8 requesttype, __u16 value,
1658			   __u16 index, void *data, __u16 size)
1659{
1660	struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev);
1661
1662	if (!chip)
1663		return;
1664	/*
1665	 * "Playback Design" products need a 20ms delay after each
1666	 * class compliant request
1667	 */
1668	if (USB_ID_VENDOR(chip->usb_id) == 0x23ba &&
1669	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1670		msleep(20);
1671
1672	/*
1673	 * "TEAC Corp." products need a 20ms delay after each
1674	 * class compliant request
1675	 */
1676	if (USB_ID_VENDOR(chip->usb_id) == 0x0644 &&
1677	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1678		msleep(20);
1679
1680	/* ITF-USB DSD based DACs functionality need a delay
1681	 * after each class compliant request
1682	 */
1683	if (is_itf_usb_dsd_dac(chip->usb_id)
1684	    && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1685		msleep(20);
1686
1687	/*
1688	 * Plantronics headsets (C320, C320-M, etc) need a delay to avoid
1689	 * random microhpone failures.
1690	 */
1691	if (USB_ID_VENDOR(chip->usb_id) == 0x047f &&
1692	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1693		msleep(20);
1694
1695	/* Zoom R16/24, many Logitech(at least H650e/H570e/BCC950),
1696	 * Jabra 550a, Kingston HyperX needs a tiny delay here,
1697	 * otherwise requests like get/set frequency return
1698	 * as failed despite actually succeeding.
1699	 */
1700	if ((chip->usb_id == USB_ID(0x1686, 0x00dd) ||
1701	     USB_ID_VENDOR(chip->usb_id) == 0x046d  || /* Logitech */
1702	     chip->usb_id == USB_ID(0x0b0e, 0x0349) ||
1703	     chip->usb_id == USB_ID(0x0951, 0x16ad)) &&
1704	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1705		usleep_range(1000, 2000);
1706
1707	/*
1708	 * Samsung USBC Headset (AKG) need a tiny delay after each
1709	 * class compliant request. (Model number: AAM625R or AAM627R)
1710	 */
1711	if (chip->usb_id == USB_ID(0x04e8, 0xa051) &&
1712	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1713		usleep_range(5000, 6000);
1714}
1715
1716/*
1717 * snd_usb_interface_dsd_format_quirks() is called from format.c to
1718 * augment the PCM format bit-field for DSD types. The UAC standards
1719 * don't have a designated bit field to denote DSD-capable interfaces,
1720 * hence all hardware that is known to support this format has to be
1721 * listed here.
1722 */
1723u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
1724					struct audioformat *fp,
1725					unsigned int sample_bytes)
1726{
1727	struct usb_interface *iface;
1728
1729	/* Playback Designs */
1730	if (USB_ID_VENDOR(chip->usb_id) == 0x23ba &&
1731	    USB_ID_PRODUCT(chip->usb_id) < 0x0110) {
1732		switch (fp->altsetting) {
1733		case 1:
1734			fp->dsd_dop = true;
1735			return SNDRV_PCM_FMTBIT_DSD_U16_LE;
1736		case 2:
1737			fp->dsd_bitrev = true;
1738			return SNDRV_PCM_FMTBIT_DSD_U8;
1739		case 3:
1740			fp->dsd_bitrev = true;
1741			return SNDRV_PCM_FMTBIT_DSD_U16_LE;
1742		}
1743	}
1744
1745	/* XMOS based USB DACs */
1746	switch (chip->usb_id) {
1747	case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */
 
 
 
1748	case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */
1749	case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */
1750		if (fp->altsetting == 2)
1751			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1752		break;
1753
1754	case USB_ID(0x0d8c, 0x0316): /* Hegel HD12 DSD */
1755	case USB_ID(0x10cb, 0x0103): /* The Bit Opus #3; with fp->dsd_raw */
1756	case USB_ID(0x16d0, 0x06b2): /* NuPrime DAC-10 */
1757	case USB_ID(0x16d0, 0x09dd): /* Encore mDSD */
1758	case USB_ID(0x16d0, 0x0733): /* Furutech ADL Stratos */
 
1759	case USB_ID(0x16d0, 0x09db): /* NuPrime Audio DAC-9 */
 
1760	case USB_ID(0x1db5, 0x0003): /* Bryston BDA3 */
 
1761	case USB_ID(0x22e1, 0xca01): /* HDTA Serenade DSD */
1762	case USB_ID(0x249c, 0x9326): /* M2Tech Young MkIII */
1763	case USB_ID(0x2616, 0x0106): /* PS Audio NuWave DAC */
1764	case USB_ID(0x2622, 0x0041): /* Audiolab M-DAC+ */
 
1765	case USB_ID(0x27f7, 0x3002): /* W4S DAC-2v2SE */
1766	case USB_ID(0x29a2, 0x0086): /* Mutec MC3+ USB */
1767	case USB_ID(0x6b42, 0x0042): /* MSB Technology */
1768		if (fp->altsetting == 3)
1769			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1770		break;
1771
1772	/* Amanero Combo384 USB based DACs with native DSD support */
1773	case USB_ID(0x16d0, 0x071a):  /* Amanero - Combo384 */
1774	case USB_ID(0x2ab6, 0x0004):  /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */
1775	case USB_ID(0x2ab6, 0x0005):  /* T+A USB HD Audio 1 */
1776	case USB_ID(0x2ab6, 0x0006):  /* T+A USB HD Audio 2 */
1777		if (fp->altsetting == 2) {
1778			switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) {
1779			case 0x199:
1780				return SNDRV_PCM_FMTBIT_DSD_U32_LE;
1781			case 0x19b:
1782			case 0x203:
1783				return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1784			default:
1785				break;
1786			}
1787		}
1788		break;
1789	case USB_ID(0x16d0, 0x0a23):
1790		if (fp->altsetting == 2)
1791			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1792		break;
1793
1794	default:
1795		break;
1796	}
1797
1798	/* ITF-USB DSD based DACs */
1799	if (is_itf_usb_dsd_dac(chip->usb_id)) {
1800		iface = usb_ifnum_to_if(chip->dev, fp->iface);
1801
1802		/* Altsetting 2 support native DSD if the num of altsets is
1803		 * three (0-2),
1804		 * Altsetting 3 support native DSD if the num of altsets is
1805		 * four (0-3).
1806		 */
1807		if (fp->altsetting == iface->num_altsetting - 1)
1808			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1809	}
1810
1811	/* Mostly generic method to detect many DSD-capable implementations -
1812	 * from XMOS/Thesycon
1813	 */
1814	switch (USB_ID_VENDOR(chip->usb_id)) {
1815	case 0x152a:  /* Thesycon devices */
1816	case 0x20b1:  /* XMOS based devices */
1817	case 0x22d9:  /* Oppo */
1818	case 0x23ba:  /* Playback Designs */
1819	case 0x25ce:  /* Mytek devices */
1820	case 0x278b:  /* Rotel? */
1821	case 0x292b:  /* Gustard/Ess based devices */
1822	case 0x2972:  /* FiiO devices */
1823	case 0x2ab6:  /* T+A devices */
1824	case 0x3353:  /* Khadas devices */
1825	case 0x3842:  /* EVGA */
1826	case 0xc502:  /* HiBy devices */
1827		if (fp->dsd_raw)
1828			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1829		break;
1830	default:
1831		break;
1832
1833	}
1834
1835	return 0;
1836}
1837
1838void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
1839					  struct audioformat *fp,
1840					  int stream)
1841{
1842	switch (chip->usb_id) {
1843	case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
1844		/* Optoplay sets the sample rate attribute although
1845		 * it seems not supporting it in fact.
1846		 */
1847		fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
1848		break;
1849	case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
1850	case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
1851		/* doesn't set the sample rate attribute, but supports it */
1852		fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
1853		break;
1854	case USB_ID(0x0763, 0x2001):  /* M-Audio Quattro USB */
1855	case USB_ID(0x0763, 0x2012):  /* M-Audio Fast Track Pro USB */
1856	case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
1857	case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
1858					an older model 77d:223) */
1859	/*
1860	 * plantronics headset and Griffin iMic have set adaptive-in
1861	 * although it's really not...
1862	 */
1863		fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
1864		if (stream == SNDRV_PCM_STREAM_PLAYBACK)
1865			fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
1866		else
1867			fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
1868		break;
1869	case USB_ID(0x07fd, 0x0004):  /* MOTU MicroBook IIc */
1870		/*
1871		 * MaxPacketsOnly attribute is erroneously set in endpoint
1872		 * descriptors. As a result this card produces noise with
1873		 * all sample rates other than 96 kHz.
1874		 */
1875		fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
1876		break;
 
 
 
 
 
 
 
 
 
1877	}
1878}
1879
1880/*
1881 * registration quirk:
1882 * the registration is skipped if a device matches with the given ID,
1883 * unless the interface reaches to the defined one.  This is for delaying
1884 * the registration until the last known interface, so that the card and
1885 * devices appear at the same time.
1886 */
1887
1888struct registration_quirk {
1889	unsigned int usb_id;	/* composed via USB_ID() */
1890	unsigned int interface;	/* the interface to trigger register */
1891};
1892
1893#define REG_QUIRK_ENTRY(vendor, product, iface) \
1894	{ .usb_id = USB_ID(vendor, product), .interface = (iface) }
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1895
1896static const struct registration_quirk registration_quirks[] = {
1897	REG_QUIRK_ENTRY(0x0951, 0x16d8, 2),	/* Kingston HyperX AMP */
1898	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
1899	REG_QUIRK_ENTRY(0x0951, 0x16ea, 2),	/* Kingston HyperX Cloud Flight S */
1900	REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2),	/* JBL Quantum 600 */
1901	REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2),	/* JBL Quantum 800 */
1902	REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2),	/* JBL Quantum 400 */
1903	REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2),	/* JBL Quantum 600 */
1904	REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2),	/* JBL Quantum 800 */
1905	{ 0 }					/* terminator */
1906};
1907
1908/* return true if skipping registration */
1909bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface)
1910{
1911	const struct registration_quirk *q;
1912
1913	for (q = registration_quirks; q->usb_id; q++)
1914		if (chip->usb_id == q->usb_id)
1915			return iface != q->interface;
1916
1917	/* Register as normal */
1918	return false;
 
 
 
 
 
 
 
 
 
 
1919}