Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*****************************************************************************/
3
4/*
5 * baycom_epp.c -- baycom epp radio modem driver.
6 *
7 * Copyright (C) 1998-2000
8 * Thomas Sailer (sailer@ife.ee.ethz.ch)
9 *
10 * Please note that the GPL allows you to use the driver, NOT the radio.
11 * In order to use the radio, you need a license from the communications
12 * authority of your country.
13 *
14 * History:
15 * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef)
16 * 0.2 21.04.1998 Massive rework by Thomas Sailer
17 * Integrated FPGA EPP modem configuration routines
18 * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program
19 * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface
20 * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall
21 * removed some pre-2.2 kernel compatibility cruft
22 * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
23 * 0.7 12.02.2000 adapted to softnet driver interface
24 */
25
26/*****************************************************************************/
27
28#include <linux/crc-ccitt.h>
29#include <linux/module.h>
30#include <linux/kernel.h>
31#include <linux/init.h>
32#include <linux/sched.h>
33#include <linux/string.h>
34#include <linux/workqueue.h>
35#include <linux/fs.h>
36#include <linux/parport.h>
37#include <linux/if_arp.h>
38#include <linux/hdlcdrv.h>
39#include <linux/baycom.h>
40#include <linux/jiffies.h>
41#include <linux/random.h>
42#include <net/ax25.h>
43#include <linux/uaccess.h>
44
45/* --------------------------------------------------------------------- */
46
47#define BAYCOM_DEBUG
48#define BAYCOM_MAGIC 19730510
49
50/* --------------------------------------------------------------------- */
51
52static const char paranoia_str[] = KERN_ERR
53 "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
54
55static const char bc_drvname[] = "baycom_epp";
56static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
57"baycom_epp: version 0.7\n";
58
59/* --------------------------------------------------------------------- */
60
61#define NR_PORTS 4
62
63static struct net_device *baycom_device[NR_PORTS];
64
65/* --------------------------------------------------------------------- */
66
67/* EPP status register */
68#define EPP_DCDBIT 0x80
69#define EPP_PTTBIT 0x08
70#define EPP_NREF 0x01
71#define EPP_NRAEF 0x02
72#define EPP_NRHF 0x04
73#define EPP_NTHF 0x20
74#define EPP_NTAEF 0x10
75#define EPP_NTEF EPP_PTTBIT
76
77/* EPP control register */
78#define EPP_TX_FIFO_ENABLE 0x10
79#define EPP_RX_FIFO_ENABLE 0x08
80#define EPP_MODEM_ENABLE 0x20
81#define EPP_LEDS 0xC0
82#define EPP_IRQ_ENABLE 0x10
83
84/* LPT registers */
85#define LPTREG_ECONTROL 0x402
86#define LPTREG_CONFIGB 0x401
87#define LPTREG_CONFIGA 0x400
88#define LPTREG_EPPDATA 0x004
89#define LPTREG_EPPADDR 0x003
90#define LPTREG_CONTROL 0x002
91#define LPTREG_STATUS 0x001
92#define LPTREG_DATA 0x000
93
94/* LPT control register */
95#define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */
96#define LPTCTRL_WRITE 0x01
97#define LPTCTRL_ADDRSTB 0x08
98#define LPTCTRL_DATASTB 0x02
99#define LPTCTRL_INTEN 0x10
100
101/* LPT status register */
102#define LPTSTAT_SHIFT_NINTR 6
103#define LPTSTAT_WAIT 0x80
104#define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR)
105#define LPTSTAT_PE 0x20
106#define LPTSTAT_DONE 0x10
107#define LPTSTAT_NERROR 0x08
108#define LPTSTAT_EPPTIMEOUT 0x01
109
110/* LPT data register */
111#define LPTDATA_SHIFT_TDI 0
112#define LPTDATA_SHIFT_TMS 2
113#define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI)
114#define LPTDATA_TCK 0x02
115#define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS)
116#define LPTDATA_INITBIAS 0x80
117
118
119/* EPP modem config/status bits */
120#define EPP_DCDBIT 0x80
121#define EPP_PTTBIT 0x08
122#define EPP_RXEBIT 0x01
123#define EPP_RXAEBIT 0x02
124#define EPP_RXHFULL 0x04
125
126#define EPP_NTHF 0x20
127#define EPP_NTAEF 0x10
128#define EPP_NTEF EPP_PTTBIT
129
130#define EPP_TX_FIFO_ENABLE 0x10
131#define EPP_RX_FIFO_ENABLE 0x08
132#define EPP_MODEM_ENABLE 0x20
133#define EPP_LEDS 0xC0
134#define EPP_IRQ_ENABLE 0x10
135
136/* Xilinx 4k JTAG instructions */
137#define XC4K_IRLENGTH 3
138#define XC4K_EXTEST 0
139#define XC4K_PRELOAD 1
140#define XC4K_CONFIGURE 5
141#define XC4K_BYPASS 7
142
143#define EPP_CONVENTIONAL 0
144#define EPP_FPGA 1
145#define EPP_FPGAEXTSTATUS 2
146
147#define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8)
148
149/* ---------------------------------------------------------------------- */
150/*
151 * Information that need to be kept for each board.
152 */
153
154struct baycom_state {
155 int magic;
156
157 struct pardevice *pdev;
158 struct net_device *dev;
159 unsigned int work_running;
160 struct delayed_work run_work;
161 unsigned int modem;
162 unsigned int bitrate;
163 unsigned char stat;
164
165 struct {
166 unsigned int intclk;
167 unsigned int fclk;
168 unsigned int bps;
169 unsigned int extmodem;
170 unsigned int loopback;
171 } cfg;
172
173 struct hdlcdrv_channel_params ch_params;
174
175 struct {
176 unsigned int bitbuf, bitstream, numbits, state;
177 unsigned char *bufptr;
178 int bufcnt;
179 unsigned char buf[TXBUFFER_SIZE];
180 } hdlcrx;
181
182 struct {
183 int calibrate;
184 int slotcnt;
185 int flags;
186 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
187 unsigned char *bufptr;
188 int bufcnt;
189 unsigned char buf[TXBUFFER_SIZE];
190 } hdlctx;
191
192 unsigned int ptt_keyed;
193 struct sk_buff *skb; /* next transmit packet */
194
195#ifdef BAYCOM_DEBUG
196 struct debug_vals {
197 unsigned long last_jiffies;
198 unsigned cur_intcnt;
199 unsigned last_intcnt;
200 int cur_pllcorr;
201 int last_pllcorr;
202 unsigned int mod_cycles;
203 unsigned int demod_cycles;
204 } debug_vals;
205#endif /* BAYCOM_DEBUG */
206};
207
208/* --------------------------------------------------------------------- */
209
210#define KISS_VERBOSE
211
212/* --------------------------------------------------------------------- */
213
214#define PARAM_TXDELAY 1
215#define PARAM_PERSIST 2
216#define PARAM_SLOTTIME 3
217#define PARAM_TXTAIL 4
218#define PARAM_FULLDUP 5
219#define PARAM_HARDWARE 6
220#define PARAM_RETURN 255
221
222/* --------------------------------------------------------------------- */
223/*
224 * the CRC routines are stolen from WAMPES
225 * by Dieter Deyke
226 */
227
228
229/*---------------------------------------------------------------------------*/
230
231#if 0
232static inline void append_crc_ccitt(unsigned char *buffer, int len)
233{
234 unsigned int crc = 0xffff;
235
236 for (;len>0;len--)
237 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
238 crc ^= 0xffff;
239 *buffer++ = crc;
240 *buffer++ = crc >> 8;
241}
242#endif
243
244/*---------------------------------------------------------------------------*/
245
246static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
247{
248 return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
249}
250
251/*---------------------------------------------------------------------------*/
252
253static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
254{
255 return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
256}
257
258/* ---------------------------------------------------------------------- */
259
260#define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
261
262/* --------------------------------------------------------------------- */
263
264static inline void baycom_int_freq(struct baycom_state *bc)
265{
266#ifdef BAYCOM_DEBUG
267 unsigned long cur_jiffies = jiffies;
268 /*
269 * measure the interrupt frequency
270 */
271 bc->debug_vals.cur_intcnt++;
272 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
273 bc->debug_vals.last_jiffies = cur_jiffies;
274 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
275 bc->debug_vals.cur_intcnt = 0;
276 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
277 bc->debug_vals.cur_pllcorr = 0;
278 }
279#endif /* BAYCOM_DEBUG */
280}
281
282/* ---------------------------------------------------------------------- */
283/*
284 * eppconfig_path should be setable via /proc/sys.
285 */
286
287static char const eppconfig_path[] = "/usr/sbin/eppfpga";
288
289static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
290
291/* eppconfig: called during ifconfig up to configure the modem */
292static int eppconfig(struct baycom_state *bc)
293{
294 char modearg[256];
295 char portarg[16];
296 char *argv[] = {
297 (char *)eppconfig_path,
298 "-s",
299 "-p", portarg,
300 "-m", modearg,
301 NULL };
302
303 /* set up arguments */
304 sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
305 bc->cfg.intclk ? "int" : "ext",
306 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
307 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
308 bc->cfg.loopback ? ",loopback" : "");
309 sprintf(portarg, "%ld", bc->pdev->port->base);
310 printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
311
312 return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
313}
314
315/* ---------------------------------------------------------------------- */
316
317static inline void do_kiss_params(struct baycom_state *bc,
318 unsigned char *data, unsigned long len)
319{
320
321#ifdef KISS_VERBOSE
322#define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
323#else /* KISS_VERBOSE */
324#define PKP(a,b)
325#endif /* KISS_VERBOSE */
326
327 if (len < 2)
328 return;
329 switch(data[0]) {
330 case PARAM_TXDELAY:
331 bc->ch_params.tx_delay = data[1];
332 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
333 break;
334 case PARAM_PERSIST:
335 bc->ch_params.ppersist = data[1];
336 PKP("p persistence = %u", bc->ch_params.ppersist);
337 break;
338 case PARAM_SLOTTIME:
339 bc->ch_params.slottime = data[1];
340 PKP("slot time = %ums", bc->ch_params.slottime);
341 break;
342 case PARAM_TXTAIL:
343 bc->ch_params.tx_tail = data[1];
344 PKP("TX tail = %ums", bc->ch_params.tx_tail);
345 break;
346 case PARAM_FULLDUP:
347 bc->ch_params.fulldup = !!data[1];
348 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
349 break;
350 default:
351 break;
352 }
353#undef PKP
354}
355
356/* --------------------------------------------------------------------- */
357
358static void encode_hdlc(struct baycom_state *bc)
359{
360 struct sk_buff *skb;
361 unsigned char *wp, *bp;
362 int pkt_len;
363 unsigned bitstream, notbitstream, bitbuf, numbit, crc;
364 unsigned char crcarr[2];
365 int j;
366
367 if (bc->hdlctx.bufcnt > 0)
368 return;
369 skb = bc->skb;
370 if (!skb)
371 return;
372 bc->skb = NULL;
373 pkt_len = skb->len-1; /* strip KISS byte */
374 wp = bc->hdlctx.buf;
375 bp = skb->data+1;
376 crc = calc_crc_ccitt(bp, pkt_len);
377 crcarr[0] = crc;
378 crcarr[1] = crc >> 8;
379 *wp++ = 0x7e;
380 bitstream = bitbuf = numbit = 0;
381 while (pkt_len > -2) {
382 bitstream >>= 8;
383 bitstream |= ((unsigned int)*bp) << 8;
384 bitbuf |= ((unsigned int)*bp) << numbit;
385 notbitstream = ~bitstream;
386 bp++;
387 pkt_len--;
388 if (!pkt_len)
389 bp = crcarr;
390 for (j = 0; j < 8; j++)
391 if (unlikely(!(notbitstream & (0x1f0 << j)))) {
392 bitstream &= ~(0x100 << j);
393 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
394 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
395 numbit++;
396 notbitstream = ~bitstream;
397 }
398 numbit += 8;
399 while (numbit >= 8) {
400 *wp++ = bitbuf;
401 bitbuf >>= 8;
402 numbit -= 8;
403 }
404 }
405 bitbuf |= 0x7e7e << numbit;
406 numbit += 16;
407 while (numbit >= 8) {
408 *wp++ = bitbuf;
409 bitbuf >>= 8;
410 numbit -= 8;
411 }
412 bc->hdlctx.bufptr = bc->hdlctx.buf;
413 bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
414 dev_kfree_skb(skb);
415 bc->dev->stats.tx_packets++;
416}
417
418/* ---------------------------------------------------------------------- */
419
420static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
421{
422 struct parport *pp = bc->pdev->port;
423 unsigned char tmp[128];
424 int i, j;
425
426 if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
427 bc->hdlctx.state = tx_idle;
428 if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
429 if (bc->hdlctx.bufcnt <= 0)
430 encode_hdlc(bc);
431 if (bc->hdlctx.bufcnt <= 0)
432 return 0;
433 if (!bc->ch_params.fulldup) {
434 if (!(stat & EPP_DCDBIT)) {
435 bc->hdlctx.slotcnt = bc->ch_params.slottime;
436 return 0;
437 }
438 if ((--bc->hdlctx.slotcnt) > 0)
439 return 0;
440 bc->hdlctx.slotcnt = bc->ch_params.slottime;
441 if ((prandom_u32() % 256) > bc->ch_params.ppersist)
442 return 0;
443 }
444 }
445 if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
446 bc->hdlctx.state = tx_keyup;
447 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
448 bc->ptt_keyed++;
449 }
450 while (cnt > 0) {
451 switch (bc->hdlctx.state) {
452 case tx_keyup:
453 i = min_t(int, cnt, bc->hdlctx.flags);
454 cnt -= i;
455 bc->hdlctx.flags -= i;
456 if (bc->hdlctx.flags <= 0)
457 bc->hdlctx.state = tx_data;
458 memset(tmp, 0x7e, sizeof(tmp));
459 while (i > 0) {
460 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
461 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
462 return -1;
463 i -= j;
464 }
465 break;
466
467 case tx_data:
468 if (bc->hdlctx.bufcnt <= 0) {
469 encode_hdlc(bc);
470 if (bc->hdlctx.bufcnt <= 0) {
471 bc->hdlctx.state = tx_tail;
472 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
473 break;
474 }
475 }
476 i = min_t(int, cnt, bc->hdlctx.bufcnt);
477 bc->hdlctx.bufcnt -= i;
478 cnt -= i;
479 if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
480 return -1;
481 bc->hdlctx.bufptr += i;
482 break;
483
484 case tx_tail:
485 encode_hdlc(bc);
486 if (bc->hdlctx.bufcnt > 0) {
487 bc->hdlctx.state = tx_data;
488 break;
489 }
490 i = min_t(int, cnt, bc->hdlctx.flags);
491 if (i) {
492 cnt -= i;
493 bc->hdlctx.flags -= i;
494 memset(tmp, 0x7e, sizeof(tmp));
495 while (i > 0) {
496 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
497 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
498 return -1;
499 i -= j;
500 }
501 break;
502 }
503 fallthrough;
504
505 default:
506 if (bc->hdlctx.calibrate <= 0)
507 return 0;
508 i = min_t(int, cnt, bc->hdlctx.calibrate);
509 cnt -= i;
510 bc->hdlctx.calibrate -= i;
511 memset(tmp, 0, sizeof(tmp));
512 while (i > 0) {
513 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
514 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
515 return -1;
516 i -= j;
517 }
518 break;
519 }
520 }
521 return 0;
522}
523
524/* ---------------------------------------------------------------------- */
525
526static void do_rxpacket(struct net_device *dev)
527{
528 struct baycom_state *bc = netdev_priv(dev);
529 struct sk_buff *skb;
530 unsigned char *cp;
531 unsigned pktlen;
532
533 if (bc->hdlcrx.bufcnt < 4)
534 return;
535 if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt))
536 return;
537 pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
538 if (!(skb = dev_alloc_skb(pktlen))) {
539 printk("%s: memory squeeze, dropping packet\n", dev->name);
540 dev->stats.rx_dropped++;
541 return;
542 }
543 cp = skb_put(skb, pktlen);
544 *cp++ = 0; /* KISS kludge */
545 memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
546 skb->protocol = ax25_type_trans(skb, dev);
547 netif_rx(skb);
548 dev->stats.rx_packets++;
549}
550
551static int receive(struct net_device *dev, int cnt)
552{
553 struct baycom_state *bc = netdev_priv(dev);
554 struct parport *pp = bc->pdev->port;
555 unsigned int bitbuf, notbitstream, bitstream, numbits, state;
556 unsigned char tmp[128];
557 unsigned char *cp;
558 int cnt2, ret = 0;
559 int j;
560
561 numbits = bc->hdlcrx.numbits;
562 state = bc->hdlcrx.state;
563 bitstream = bc->hdlcrx.bitstream;
564 bitbuf = bc->hdlcrx.bitbuf;
565 while (cnt > 0) {
566 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
567 cnt -= cnt2;
568 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
569 ret = -1;
570 break;
571 }
572 cp = tmp;
573 for (; cnt2 > 0; cnt2--, cp++) {
574 bitstream >>= 8;
575 bitstream |= (*cp) << 8;
576 bitbuf >>= 8;
577 bitbuf |= (*cp) << 8;
578 numbits += 8;
579 notbitstream = ~bitstream;
580 for (j = 0; j < 8; j++) {
581
582 /* flag or abort */
583 if (unlikely(!(notbitstream & (0x0fc << j)))) {
584
585 /* abort received */
586 if (!(notbitstream & (0x1fc << j)))
587 state = 0;
588
589 /* flag received */
590 else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) {
591 if (state)
592 do_rxpacket(dev);
593 bc->hdlcrx.bufcnt = 0;
594 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
595 state = 1;
596 numbits = 7-j;
597 }
598 }
599
600 /* stuffed bit */
601 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
602 numbits--;
603 bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
604 }
605 }
606 while (state && numbits >= 8) {
607 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
608 state = 0;
609 } else {
610 *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
611 bc->hdlcrx.bufcnt++;
612 numbits -= 8;
613 }
614 }
615 }
616 }
617 bc->hdlcrx.numbits = numbits;
618 bc->hdlcrx.state = state;
619 bc->hdlcrx.bitstream = bitstream;
620 bc->hdlcrx.bitbuf = bitbuf;
621 return ret;
622}
623
624/* --------------------------------------------------------------------- */
625
626#if defined(__i386__) && !defined(CONFIG_UML)
627#include <asm/msr.h>
628#define GETTICK(x) \
629({ \
630 if (boot_cpu_has(X86_FEATURE_TSC)) \
631 x = (unsigned int)rdtsc(); \
632})
633#else /* __i386__ && !CONFIG_UML */
634#define GETTICK(x)
635#endif /* __i386__ && !CONFIG_UML */
636
637static void epp_bh(struct work_struct *work)
638{
639 struct net_device *dev;
640 struct baycom_state *bc;
641 struct parport *pp;
642 unsigned char stat;
643 unsigned char tmp[2];
644 unsigned int time1 = 0, time2 = 0, time3 = 0;
645 int cnt, cnt2;
646
647 bc = container_of(work, struct baycom_state, run_work.work);
648 dev = bc->dev;
649 if (!bc->work_running)
650 return;
651 baycom_int_freq(bc);
652 pp = bc->pdev->port;
653 /* update status */
654 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
655 goto epptimeout;
656 bc->stat = stat;
657 bc->debug_vals.last_pllcorr = stat;
658 GETTICK(time1);
659 if (bc->modem == EPP_FPGAEXTSTATUS) {
660 /* get input count */
661 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
662 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
663 goto epptimeout;
664 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
665 goto epptimeout;
666 cnt = tmp[0] | (tmp[1] << 8);
667 cnt &= 0x7fff;
668 /* get output count */
669 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
670 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
671 goto epptimeout;
672 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
673 goto epptimeout;
674 cnt2 = tmp[0] | (tmp[1] << 8);
675 cnt2 = 16384 - (cnt2 & 0x7fff);
676 /* return to normal */
677 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
678 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
679 goto epptimeout;
680 if (transmit(bc, cnt2, stat))
681 goto epptimeout;
682 GETTICK(time2);
683 if (receive(dev, cnt))
684 goto epptimeout;
685 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
686 goto epptimeout;
687 bc->stat = stat;
688 } else {
689 /* try to tx */
690 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
691 case EPP_NTHF:
692 cnt = 2048 - 256;
693 break;
694
695 case EPP_NTAEF:
696 cnt = 2048 - 1793;
697 break;
698
699 case 0:
700 cnt = 0;
701 break;
702
703 default:
704 cnt = 2048 - 1025;
705 break;
706 }
707 if (transmit(bc, cnt, stat))
708 goto epptimeout;
709 GETTICK(time2);
710 /* do receiver */
711 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
712 switch (stat & (EPP_NRAEF|EPP_NRHF)) {
713 case EPP_NRAEF:
714 cnt = 1025;
715 break;
716
717 case 0:
718 cnt = 1793;
719 break;
720
721 default:
722 cnt = 256;
723 break;
724 }
725 if (receive(dev, cnt))
726 goto epptimeout;
727 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
728 goto epptimeout;
729 }
730 cnt = 0;
731 if (bc->bitrate < 50000)
732 cnt = 256;
733 else if (bc->bitrate < 100000)
734 cnt = 128;
735 while (cnt > 0 && stat & EPP_NREF) {
736 if (receive(dev, 1))
737 goto epptimeout;
738 cnt--;
739 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
740 goto epptimeout;
741 }
742 }
743 GETTICK(time3);
744#ifdef BAYCOM_DEBUG
745 bc->debug_vals.mod_cycles = time2 - time1;
746 bc->debug_vals.demod_cycles = time3 - time2;
747#endif /* BAYCOM_DEBUG */
748 schedule_delayed_work(&bc->run_work, 1);
749 if (!bc->skb)
750 netif_wake_queue(dev);
751 return;
752 epptimeout:
753 printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
754}
755
756/* ---------------------------------------------------------------------- */
757/*
758 * ===================== network driver interface =========================
759 */
760
761static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
762{
763 struct baycom_state *bc = netdev_priv(dev);
764
765 if (skb->protocol == htons(ETH_P_IP))
766 return ax25_ip_xmit(skb);
767
768 if (skb->data[0] != 0) {
769 do_kiss_params(bc, skb->data, skb->len);
770 dev_kfree_skb(skb);
771 return NETDEV_TX_OK;
772 }
773 if (bc->skb) {
774 dev_kfree_skb(skb);
775 return NETDEV_TX_OK;
776 }
777 /* strip KISS byte */
778 if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
779 dev_kfree_skb(skb);
780 return NETDEV_TX_OK;
781 }
782 netif_stop_queue(dev);
783 bc->skb = skb;
784 return NETDEV_TX_OK;
785}
786
787/* --------------------------------------------------------------------- */
788
789static int baycom_set_mac_address(struct net_device *dev, void *addr)
790{
791 struct sockaddr *sa = (struct sockaddr *)addr;
792
793 /* addr is an AX.25 shifted ASCII mac address */
794 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
795 return 0;
796}
797
798/* --------------------------------------------------------------------- */
799
800static void epp_wakeup(void *handle)
801{
802 struct net_device *dev = (struct net_device *)handle;
803 struct baycom_state *bc = netdev_priv(dev);
804
805 printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
806 if (!parport_claim(bc->pdev))
807 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
808}
809
810/* --------------------------------------------------------------------- */
811
812/*
813 * Open/initialize the board. This is called (in the current kernel)
814 * sometime after booting when the 'ifconfig' program is run.
815 *
816 * This routine should set everything up anew at each open, even
817 * registers that "should" only need to be set once at boot, so that
818 * there is non-reboot way to recover if something goes wrong.
819 */
820
821static int epp_open(struct net_device *dev)
822{
823 struct baycom_state *bc = netdev_priv(dev);
824 struct parport *pp = parport_find_base(dev->base_addr);
825 unsigned int i, j;
826 unsigned char tmp[128];
827 unsigned char stat;
828 unsigned long tstart;
829 struct pardev_cb par_cb;
830
831 if (!pp) {
832 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
833 return -ENXIO;
834 }
835#if 0
836 if (pp->irq < 0) {
837 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
838 parport_put_port(pp);
839 return -ENXIO;
840 }
841#endif
842 if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
843 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
844 bc_drvname, pp->base);
845 parport_put_port(pp);
846 return -EIO;
847 }
848 memset(&bc->modem, 0, sizeof(bc->modem));
849 memset(&par_cb, 0, sizeof(par_cb));
850 par_cb.wakeup = epp_wakeup;
851 par_cb.private = (void *)dev;
852 par_cb.flags = PARPORT_DEV_EXCL;
853 for (i = 0; i < NR_PORTS; i++)
854 if (baycom_device[i] == dev)
855 break;
856
857 if (i == NR_PORTS) {
858 pr_err("%s: no device found\n", bc_drvname);
859 parport_put_port(pp);
860 return -ENODEV;
861 }
862
863 bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i);
864 parport_put_port(pp);
865 if (!bc->pdev) {
866 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
867 return -ENXIO;
868 }
869 if (parport_claim(bc->pdev)) {
870 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
871 parport_unregister_device(bc->pdev);
872 return -EBUSY;
873 }
874 dev->irq = /*pp->irq*/ 0;
875 INIT_DELAYED_WORK(&bc->run_work, epp_bh);
876 bc->work_running = 1;
877 bc->modem = EPP_CONVENTIONAL;
878 if (eppconfig(bc))
879 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
880 else
881 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
882 parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
883 /* reset the modem */
884 tmp[0] = 0;
885 tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
886 if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
887 goto epptimeout;
888 /* autoprobe baud rate */
889 tstart = jiffies;
890 i = 0;
891 while (time_before(jiffies, tstart + HZ/3)) {
892 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
893 goto epptimeout;
894 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
895 schedule();
896 continue;
897 }
898 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
899 goto epptimeout;
900 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
901 goto epptimeout;
902 i += 256;
903 }
904 for (j = 0; j < 256; j++) {
905 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
906 goto epptimeout;
907 if (!(stat & EPP_NREF))
908 break;
909 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
910 goto epptimeout;
911 i++;
912 }
913 tstart = jiffies - tstart;
914 bc->bitrate = i * (8 * HZ) / tstart;
915 j = 1;
916 i = bc->bitrate >> 3;
917 while (j < 7 && i > 150) {
918 j++;
919 i >>= 1;
920 }
921 printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n",
922 bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
923 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
924 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
925 goto epptimeout;
926 /*
927 * initialise hdlc variables
928 */
929 bc->hdlcrx.state = 0;
930 bc->hdlcrx.numbits = 0;
931 bc->hdlctx.state = tx_idle;
932 bc->hdlctx.bufcnt = 0;
933 bc->hdlctx.slotcnt = bc->ch_params.slottime;
934 bc->hdlctx.calibrate = 0;
935 /* start the bottom half stuff */
936 schedule_delayed_work(&bc->run_work, 1);
937 netif_start_queue(dev);
938 return 0;
939
940 epptimeout:
941 printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
942 parport_write_control(pp, 0); /* reset the adapter */
943 parport_release(bc->pdev);
944 parport_unregister_device(bc->pdev);
945 return -EIO;
946}
947
948/* --------------------------------------------------------------------- */
949
950static int epp_close(struct net_device *dev)
951{
952 struct baycom_state *bc = netdev_priv(dev);
953 struct parport *pp = bc->pdev->port;
954 unsigned char tmp[1];
955
956 bc->work_running = 0;
957 cancel_delayed_work_sync(&bc->run_work);
958 bc->stat = EPP_DCDBIT;
959 tmp[0] = 0;
960 pp->ops->epp_write_addr(pp, tmp, 1, 0);
961 parport_write_control(pp, 0); /* reset the adapter */
962 parport_release(bc->pdev);
963 parport_unregister_device(bc->pdev);
964 dev_kfree_skb(bc->skb);
965 bc->skb = NULL;
966 printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
967 bc_drvname, dev->base_addr, dev->irq);
968 return 0;
969}
970
971/* --------------------------------------------------------------------- */
972
973static int baycom_setmode(struct baycom_state *bc, const char *modestr)
974{
975 const char *cp;
976
977 if (strstr(modestr,"intclk"))
978 bc->cfg.intclk = 1;
979 if (strstr(modestr,"extclk"))
980 bc->cfg.intclk = 0;
981 if (strstr(modestr,"intmodem"))
982 bc->cfg.extmodem = 0;
983 if (strstr(modestr,"extmodem"))
984 bc->cfg.extmodem = 1;
985 if (strstr(modestr,"noloopback"))
986 bc->cfg.loopback = 0;
987 if (strstr(modestr,"loopback"))
988 bc->cfg.loopback = 1;
989 if ((cp = strstr(modestr,"fclk="))) {
990 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
991 if (bc->cfg.fclk < 1000000)
992 bc->cfg.fclk = 1000000;
993 if (bc->cfg.fclk > 25000000)
994 bc->cfg.fclk = 25000000;
995 }
996 if ((cp = strstr(modestr,"bps="))) {
997 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
998 if (bc->cfg.bps < 1000)
999 bc->cfg.bps = 1000;
1000 if (bc->cfg.bps > 1500000)
1001 bc->cfg.bps = 1500000;
1002 }
1003 return 0;
1004}
1005
1006/* --------------------------------------------------------------------- */
1007
1008static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1009{
1010 struct baycom_state *bc = netdev_priv(dev);
1011 struct hdlcdrv_ioctl hi;
1012
1013 if (cmd != SIOCDEVPRIVATE)
1014 return -ENOIOCTLCMD;
1015
1016 if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1017 return -EFAULT;
1018 switch (hi.cmd) {
1019 default:
1020 return -ENOIOCTLCMD;
1021
1022 case HDLCDRVCTL_GETCHANNELPAR:
1023 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1024 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1025 hi.data.cp.slottime = bc->ch_params.slottime;
1026 hi.data.cp.ppersist = bc->ch_params.ppersist;
1027 hi.data.cp.fulldup = bc->ch_params.fulldup;
1028 break;
1029
1030 case HDLCDRVCTL_SETCHANNELPAR:
1031 if (!capable(CAP_NET_ADMIN))
1032 return -EACCES;
1033 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1034 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1035 bc->ch_params.slottime = hi.data.cp.slottime;
1036 bc->ch_params.ppersist = hi.data.cp.ppersist;
1037 bc->ch_params.fulldup = hi.data.cp.fulldup;
1038 bc->hdlctx.slotcnt = 1;
1039 return 0;
1040
1041 case HDLCDRVCTL_GETMODEMPAR:
1042 hi.data.mp.iobase = dev->base_addr;
1043 hi.data.mp.irq = dev->irq;
1044 hi.data.mp.dma = dev->dma;
1045 hi.data.mp.dma2 = 0;
1046 hi.data.mp.seriobase = 0;
1047 hi.data.mp.pariobase = 0;
1048 hi.data.mp.midiiobase = 0;
1049 break;
1050
1051 case HDLCDRVCTL_SETMODEMPAR:
1052 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1053 return -EACCES;
1054 dev->base_addr = hi.data.mp.iobase;
1055 dev->irq = /*hi.data.mp.irq*/0;
1056 dev->dma = /*hi.data.mp.dma*/0;
1057 return 0;
1058
1059 case HDLCDRVCTL_GETSTAT:
1060 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1061 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1062 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1063 hi.data.cs.tx_packets = dev->stats.tx_packets;
1064 hi.data.cs.tx_errors = dev->stats.tx_errors;
1065 hi.data.cs.rx_packets = dev->stats.rx_packets;
1066 hi.data.cs.rx_errors = dev->stats.rx_errors;
1067 break;
1068
1069 case HDLCDRVCTL_OLDGETSTAT:
1070 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1071 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1072 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1073 break;
1074
1075 case HDLCDRVCTL_CALIBRATE:
1076 if (!capable(CAP_SYS_RAWIO))
1077 return -EACCES;
1078 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1079 return 0;
1080
1081 case HDLCDRVCTL_DRIVERNAME:
1082 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1083 break;
1084
1085 case HDLCDRVCTL_GETMODE:
1086 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
1087 bc->cfg.intclk ? "int" : "ext",
1088 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1089 bc->cfg.loopback ? ",loopback" : "");
1090 break;
1091
1092 case HDLCDRVCTL_SETMODE:
1093 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1094 return -EACCES;
1095 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1096 return baycom_setmode(bc, hi.data.modename);
1097
1098 case HDLCDRVCTL_MODELIST:
1099 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1100 sizeof(hi.data.modename));
1101 break;
1102
1103 case HDLCDRVCTL_MODEMPARMASK:
1104 return HDLCDRV_PARMASK_IOBASE;
1105
1106 }
1107 if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1108 return -EFAULT;
1109 return 0;
1110}
1111
1112/* --------------------------------------------------------------------- */
1113
1114static const struct net_device_ops baycom_netdev_ops = {
1115 .ndo_open = epp_open,
1116 .ndo_stop = epp_close,
1117 .ndo_do_ioctl = baycom_ioctl,
1118 .ndo_start_xmit = baycom_send_packet,
1119 .ndo_set_mac_address = baycom_set_mac_address,
1120};
1121
1122/*
1123 * Check for a network adaptor of this type, and return '0' if one exists.
1124 * If dev->base_addr == 0, probe all likely locations.
1125 * If dev->base_addr == 1, always return failure.
1126 * If dev->base_addr == 2, allocate space for the device and return success
1127 * (detachable devices only).
1128 */
1129static void baycom_probe(struct net_device *dev)
1130{
1131 const struct hdlcdrv_channel_params dflt_ch_params = {
1132 20, 2, 10, 40, 0
1133 };
1134 struct baycom_state *bc;
1135
1136 /*
1137 * not a real probe! only initialize data structures
1138 */
1139 bc = netdev_priv(dev);
1140 /*
1141 * initialize the baycom_state struct
1142 */
1143 bc->ch_params = dflt_ch_params;
1144 bc->ptt_keyed = 0;
1145
1146 /*
1147 * initialize the device struct
1148 */
1149
1150 /* Fill in the fields of the device structure */
1151 bc->skb = NULL;
1152
1153 dev->netdev_ops = &baycom_netdev_ops;
1154 dev->header_ops = &ax25_header_ops;
1155
1156 dev->type = ARPHRD_AX25; /* AF_AX25 device */
1157 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1158 dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
1159 dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
1160 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1161 memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
1162 dev->tx_queue_len = 16;
1163
1164 /* New style flags */
1165 dev->flags = 0;
1166}
1167
1168/* --------------------------------------------------------------------- */
1169
1170/*
1171 * command line settable parameters
1172 */
1173static char *mode[NR_PORTS] = { "", };
1174static int iobase[NR_PORTS] = { 0x378, };
1175
1176module_param_array(mode, charp, NULL, 0);
1177MODULE_PARM_DESC(mode, "baycom operating mode");
1178module_param_hw_array(iobase, int, ioport, NULL, 0);
1179MODULE_PARM_DESC(iobase, "baycom io base address");
1180
1181MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1182MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1183MODULE_LICENSE("GPL");
1184
1185/* --------------------------------------------------------------------- */
1186
1187static int baycom_epp_par_probe(struct pardevice *par_dev)
1188{
1189 struct device_driver *drv = par_dev->dev.driver;
1190 int len = strlen(drv->name);
1191
1192 if (strncmp(par_dev->name, drv->name, len))
1193 return -ENODEV;
1194
1195 return 0;
1196}
1197
1198static struct parport_driver baycom_epp_par_driver = {
1199 .name = "bce",
1200 .probe = baycom_epp_par_probe,
1201 .devmodel = true,
1202};
1203
1204static void __init baycom_epp_dev_setup(struct net_device *dev)
1205{
1206 struct baycom_state *bc = netdev_priv(dev);
1207
1208 /*
1209 * initialize part of the baycom_state struct
1210 */
1211 bc->dev = dev;
1212 bc->magic = BAYCOM_MAGIC;
1213 bc->cfg.fclk = 19666600;
1214 bc->cfg.bps = 9600;
1215 /*
1216 * initialize part of the device struct
1217 */
1218 baycom_probe(dev);
1219}
1220
1221static int __init init_baycomepp(void)
1222{
1223 int i, found = 0, ret;
1224 char set_hw = 1;
1225
1226 printk(bc_drvinfo);
1227
1228 ret = parport_register_driver(&baycom_epp_par_driver);
1229 if (ret)
1230 return ret;
1231
1232 /*
1233 * register net devices
1234 */
1235 for (i = 0; i < NR_PORTS; i++) {
1236 struct net_device *dev;
1237
1238 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1239 NET_NAME_UNKNOWN, baycom_epp_dev_setup);
1240
1241 if (!dev) {
1242 printk(KERN_WARNING "bce%d : out of memory\n", i);
1243 return found ? 0 : -ENOMEM;
1244 }
1245
1246 sprintf(dev->name, "bce%d", i);
1247 dev->base_addr = iobase[i];
1248
1249 if (!mode[i])
1250 set_hw = 0;
1251 if (!set_hw)
1252 iobase[i] = 0;
1253
1254 if (register_netdev(dev)) {
1255 printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1256 free_netdev(dev);
1257 break;
1258 }
1259 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1260 set_hw = 0;
1261 baycom_device[i] = dev;
1262 found++;
1263 }
1264
1265 if (found == 0) {
1266 parport_unregister_driver(&baycom_epp_par_driver);
1267 return -ENXIO;
1268 }
1269
1270 return 0;
1271}
1272
1273static void __exit cleanup_baycomepp(void)
1274{
1275 int i;
1276
1277 for(i = 0; i < NR_PORTS; i++) {
1278 struct net_device *dev = baycom_device[i];
1279
1280 if (dev) {
1281 struct baycom_state *bc = netdev_priv(dev);
1282 if (bc->magic == BAYCOM_MAGIC) {
1283 unregister_netdev(dev);
1284 free_netdev(dev);
1285 } else
1286 printk(paranoia_str, "cleanup_module");
1287 }
1288 }
1289 parport_unregister_driver(&baycom_epp_par_driver);
1290}
1291
1292module_init(init_baycomepp);
1293module_exit(cleanup_baycomepp);
1294
1295/* --------------------------------------------------------------------- */
1296
1297#ifndef MODULE
1298
1299/*
1300 * format: baycom_epp=io,mode
1301 * mode: fpga config options
1302 */
1303
1304static int __init baycom_epp_setup(char *str)
1305{
1306 static unsigned __initdata nr_dev = 0;
1307 int ints[2];
1308
1309 if (nr_dev >= NR_PORTS)
1310 return 0;
1311 str = get_options(str, 2, ints);
1312 if (ints[0] < 1)
1313 return 0;
1314 mode[nr_dev] = str;
1315 iobase[nr_dev] = ints[1];
1316 nr_dev++;
1317 return 1;
1318}
1319
1320__setup("baycom_epp=", baycom_epp_setup);
1321
1322#endif /* MODULE */
1323/* --------------------------------------------------------------------- */
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*****************************************************************************/
3
4/*
5 * baycom_epp.c -- baycom epp radio modem driver.
6 *
7 * Copyright (C) 1998-2000
8 * Thomas Sailer (sailer@ife.ee.ethz.ch)
9 *
10 * Please note that the GPL allows you to use the driver, NOT the radio.
11 * In order to use the radio, you need a license from the communications
12 * authority of your country.
13 *
14 * History:
15 * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef)
16 * 0.2 21.04.1998 Massive rework by Thomas Sailer
17 * Integrated FPGA EPP modem configuration routines
18 * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program
19 * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface
20 * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall
21 * removed some pre-2.2 kernel compatibility cruft
22 * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
23 * 0.7 12.02.2000 adapted to softnet driver interface
24 */
25
26/*****************************************************************************/
27
28#include <linux/crc-ccitt.h>
29#include <linux/module.h>
30#include <linux/kernel.h>
31#include <linux/init.h>
32#include <linux/sched.h>
33#include <linux/string.h>
34#include <linux/workqueue.h>
35#include <linux/fs.h>
36#include <linux/parport.h>
37#include <linux/if_arp.h>
38#include <linux/hdlcdrv.h>
39#include <linux/baycom.h>
40#include <linux/jiffies.h>
41#include <linux/random.h>
42#include <net/ax25.h>
43#include <linux/uaccess.h>
44
45/* --------------------------------------------------------------------- */
46
47#define BAYCOM_DEBUG
48#define BAYCOM_MAGIC 19730510
49
50/* --------------------------------------------------------------------- */
51
52static const char paranoia_str[] = KERN_ERR
53 "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
54
55static const char bc_drvname[] = "baycom_epp";
56static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
57"baycom_epp: version 0.7\n";
58
59/* --------------------------------------------------------------------- */
60
61#define NR_PORTS 4
62
63static struct net_device *baycom_device[NR_PORTS];
64
65/* --------------------------------------------------------------------- */
66
67/* EPP status register */
68#define EPP_DCDBIT 0x80
69#define EPP_PTTBIT 0x08
70#define EPP_NREF 0x01
71#define EPP_NRAEF 0x02
72#define EPP_NRHF 0x04
73#define EPP_NTHF 0x20
74#define EPP_NTAEF 0x10
75#define EPP_NTEF EPP_PTTBIT
76
77/* EPP control register */
78#define EPP_TX_FIFO_ENABLE 0x10
79#define EPP_RX_FIFO_ENABLE 0x08
80#define EPP_MODEM_ENABLE 0x20
81#define EPP_LEDS 0xC0
82#define EPP_IRQ_ENABLE 0x10
83
84/* LPT registers */
85#define LPTREG_ECONTROL 0x402
86#define LPTREG_CONFIGB 0x401
87#define LPTREG_CONFIGA 0x400
88#define LPTREG_EPPDATA 0x004
89#define LPTREG_EPPADDR 0x003
90#define LPTREG_CONTROL 0x002
91#define LPTREG_STATUS 0x001
92#define LPTREG_DATA 0x000
93
94/* LPT control register */
95#define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */
96#define LPTCTRL_WRITE 0x01
97#define LPTCTRL_ADDRSTB 0x08
98#define LPTCTRL_DATASTB 0x02
99#define LPTCTRL_INTEN 0x10
100
101/* LPT status register */
102#define LPTSTAT_SHIFT_NINTR 6
103#define LPTSTAT_WAIT 0x80
104#define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR)
105#define LPTSTAT_PE 0x20
106#define LPTSTAT_DONE 0x10
107#define LPTSTAT_NERROR 0x08
108#define LPTSTAT_EPPTIMEOUT 0x01
109
110/* LPT data register */
111#define LPTDATA_SHIFT_TDI 0
112#define LPTDATA_SHIFT_TMS 2
113#define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI)
114#define LPTDATA_TCK 0x02
115#define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS)
116#define LPTDATA_INITBIAS 0x80
117
118
119/* EPP modem config/status bits */
120#define EPP_DCDBIT 0x80
121#define EPP_PTTBIT 0x08
122#define EPP_RXEBIT 0x01
123#define EPP_RXAEBIT 0x02
124#define EPP_RXHFULL 0x04
125
126#define EPP_NTHF 0x20
127#define EPP_NTAEF 0x10
128#define EPP_NTEF EPP_PTTBIT
129
130#define EPP_TX_FIFO_ENABLE 0x10
131#define EPP_RX_FIFO_ENABLE 0x08
132#define EPP_MODEM_ENABLE 0x20
133#define EPP_LEDS 0xC0
134#define EPP_IRQ_ENABLE 0x10
135
136/* Xilinx 4k JTAG instructions */
137#define XC4K_IRLENGTH 3
138#define XC4K_EXTEST 0
139#define XC4K_PRELOAD 1
140#define XC4K_CONFIGURE 5
141#define XC4K_BYPASS 7
142
143#define EPP_CONVENTIONAL 0
144#define EPP_FPGA 1
145#define EPP_FPGAEXTSTATUS 2
146
147#define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8)
148
149/* ---------------------------------------------------------------------- */
150/*
151 * Information that need to be kept for each board.
152 */
153
154struct baycom_state {
155 int magic;
156
157 struct pardevice *pdev;
158 struct net_device *dev;
159 unsigned int work_running;
160 struct delayed_work run_work;
161 unsigned int modem;
162 unsigned int bitrate;
163 unsigned char stat;
164
165 struct {
166 unsigned int intclk;
167 unsigned int fclk;
168 unsigned int bps;
169 unsigned int extmodem;
170 unsigned int loopback;
171 } cfg;
172
173 struct hdlcdrv_channel_params ch_params;
174
175 struct {
176 unsigned int bitbuf, bitstream, numbits, state;
177 unsigned char *bufptr;
178 int bufcnt;
179 unsigned char buf[TXBUFFER_SIZE];
180 } hdlcrx;
181
182 struct {
183 int calibrate;
184 int slotcnt;
185 int flags;
186 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
187 unsigned char *bufptr;
188 int bufcnt;
189 unsigned char buf[TXBUFFER_SIZE];
190 } hdlctx;
191
192 unsigned int ptt_keyed;
193 struct sk_buff *skb; /* next transmit packet */
194
195#ifdef BAYCOM_DEBUG
196 struct debug_vals {
197 unsigned long last_jiffies;
198 unsigned cur_intcnt;
199 unsigned last_intcnt;
200 int cur_pllcorr;
201 int last_pllcorr;
202 unsigned int mod_cycles;
203 unsigned int demod_cycles;
204 } debug_vals;
205#endif /* BAYCOM_DEBUG */
206};
207
208/* --------------------------------------------------------------------- */
209
210#define KISS_VERBOSE
211
212/* --------------------------------------------------------------------- */
213
214#define PARAM_TXDELAY 1
215#define PARAM_PERSIST 2
216#define PARAM_SLOTTIME 3
217#define PARAM_TXTAIL 4
218#define PARAM_FULLDUP 5
219#define PARAM_HARDWARE 6
220#define PARAM_RETURN 255
221
222/* --------------------------------------------------------------------- */
223/*
224 * the CRC routines are stolen from WAMPES
225 * by Dieter Deyke
226 */
227
228
229/*---------------------------------------------------------------------------*/
230
231#if 0
232static inline void append_crc_ccitt(unsigned char *buffer, int len)
233{
234 unsigned int crc = 0xffff;
235
236 for (;len>0;len--)
237 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
238 crc ^= 0xffff;
239 *buffer++ = crc;
240 *buffer++ = crc >> 8;
241}
242#endif
243
244/*---------------------------------------------------------------------------*/
245
246static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
247{
248 return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
249}
250
251/*---------------------------------------------------------------------------*/
252
253static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
254{
255 return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
256}
257
258/* ---------------------------------------------------------------------- */
259
260#define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
261
262/* --------------------------------------------------------------------- */
263
264static inline void baycom_int_freq(struct baycom_state *bc)
265{
266#ifdef BAYCOM_DEBUG
267 unsigned long cur_jiffies = jiffies;
268 /*
269 * measure the interrupt frequency
270 */
271 bc->debug_vals.cur_intcnt++;
272 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
273 bc->debug_vals.last_jiffies = cur_jiffies;
274 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
275 bc->debug_vals.cur_intcnt = 0;
276 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
277 bc->debug_vals.cur_pllcorr = 0;
278 }
279#endif /* BAYCOM_DEBUG */
280}
281
282/* ---------------------------------------------------------------------- */
283/*
284 * eppconfig_path should be setable via /proc/sys.
285 */
286
287static char const eppconfig_path[] = "/usr/sbin/eppfpga";
288
289static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
290
291/* eppconfig: called during ifconfig up to configure the modem */
292static int eppconfig(struct baycom_state *bc)
293{
294 char modearg[256];
295 char portarg[16];
296 char *argv[] = {
297 (char *)eppconfig_path,
298 "-s",
299 "-p", portarg,
300 "-m", modearg,
301 NULL };
302
303 /* set up arguments */
304 sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
305 bc->cfg.intclk ? "int" : "ext",
306 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
307 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
308 bc->cfg.loopback ? ",loopback" : "");
309 sprintf(portarg, "%ld", bc->pdev->port->base);
310 printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
311
312 return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
313}
314
315/* ---------------------------------------------------------------------- */
316
317static inline void do_kiss_params(struct baycom_state *bc,
318 unsigned char *data, unsigned long len)
319{
320
321#ifdef KISS_VERBOSE
322#define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
323#else /* KISS_VERBOSE */
324#define PKP(a,b)
325#endif /* KISS_VERBOSE */
326
327 if (len < 2)
328 return;
329 switch(data[0]) {
330 case PARAM_TXDELAY:
331 bc->ch_params.tx_delay = data[1];
332 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
333 break;
334 case PARAM_PERSIST:
335 bc->ch_params.ppersist = data[1];
336 PKP("p persistence = %u", bc->ch_params.ppersist);
337 break;
338 case PARAM_SLOTTIME:
339 bc->ch_params.slottime = data[1];
340 PKP("slot time = %ums", bc->ch_params.slottime);
341 break;
342 case PARAM_TXTAIL:
343 bc->ch_params.tx_tail = data[1];
344 PKP("TX tail = %ums", bc->ch_params.tx_tail);
345 break;
346 case PARAM_FULLDUP:
347 bc->ch_params.fulldup = !!data[1];
348 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
349 break;
350 default:
351 break;
352 }
353#undef PKP
354}
355
356/* --------------------------------------------------------------------- */
357
358static void encode_hdlc(struct baycom_state *bc)
359{
360 struct sk_buff *skb;
361 unsigned char *wp, *bp;
362 int pkt_len;
363 unsigned bitstream, notbitstream, bitbuf, numbit, crc;
364 unsigned char crcarr[2];
365 int j;
366
367 if (bc->hdlctx.bufcnt > 0)
368 return;
369 skb = bc->skb;
370 if (!skb)
371 return;
372 bc->skb = NULL;
373 pkt_len = skb->len-1; /* strip KISS byte */
374 wp = bc->hdlctx.buf;
375 bp = skb->data+1;
376 crc = calc_crc_ccitt(bp, pkt_len);
377 crcarr[0] = crc;
378 crcarr[1] = crc >> 8;
379 *wp++ = 0x7e;
380 bitstream = bitbuf = numbit = 0;
381 while (pkt_len > -2) {
382 bitstream >>= 8;
383 bitstream |= ((unsigned int)*bp) << 8;
384 bitbuf |= ((unsigned int)*bp) << numbit;
385 notbitstream = ~bitstream;
386 bp++;
387 pkt_len--;
388 if (!pkt_len)
389 bp = crcarr;
390 for (j = 0; j < 8; j++)
391 if (unlikely(!(notbitstream & (0x1f0 << j)))) {
392 bitstream &= ~(0x100 << j);
393 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
394 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
395 numbit++;
396 notbitstream = ~bitstream;
397 }
398 numbit += 8;
399 while (numbit >= 8) {
400 *wp++ = bitbuf;
401 bitbuf >>= 8;
402 numbit -= 8;
403 }
404 }
405 bitbuf |= 0x7e7e << numbit;
406 numbit += 16;
407 while (numbit >= 8) {
408 *wp++ = bitbuf;
409 bitbuf >>= 8;
410 numbit -= 8;
411 }
412 bc->hdlctx.bufptr = bc->hdlctx.buf;
413 bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
414 dev_kfree_skb(skb);
415 bc->dev->stats.tx_packets++;
416}
417
418/* ---------------------------------------------------------------------- */
419
420static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
421{
422 struct parport *pp = bc->pdev->port;
423 unsigned char tmp[128];
424 int i, j;
425
426 if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
427 bc->hdlctx.state = tx_idle;
428 if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
429 if (bc->hdlctx.bufcnt <= 0)
430 encode_hdlc(bc);
431 if (bc->hdlctx.bufcnt <= 0)
432 return 0;
433 if (!bc->ch_params.fulldup) {
434 if (!(stat & EPP_DCDBIT)) {
435 bc->hdlctx.slotcnt = bc->ch_params.slottime;
436 return 0;
437 }
438 if ((--bc->hdlctx.slotcnt) > 0)
439 return 0;
440 bc->hdlctx.slotcnt = bc->ch_params.slottime;
441 if (get_random_u8() > bc->ch_params.ppersist)
442 return 0;
443 }
444 }
445 if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
446 bc->hdlctx.state = tx_keyup;
447 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
448 bc->ptt_keyed++;
449 }
450 while (cnt > 0) {
451 switch (bc->hdlctx.state) {
452 case tx_keyup:
453 i = min_t(int, cnt, bc->hdlctx.flags);
454 cnt -= i;
455 bc->hdlctx.flags -= i;
456 if (bc->hdlctx.flags <= 0)
457 bc->hdlctx.state = tx_data;
458 memset(tmp, 0x7e, sizeof(tmp));
459 while (i > 0) {
460 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
461 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
462 return -1;
463 i -= j;
464 }
465 break;
466
467 case tx_data:
468 if (bc->hdlctx.bufcnt <= 0) {
469 encode_hdlc(bc);
470 if (bc->hdlctx.bufcnt <= 0) {
471 bc->hdlctx.state = tx_tail;
472 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
473 break;
474 }
475 }
476 i = min_t(int, cnt, bc->hdlctx.bufcnt);
477 bc->hdlctx.bufcnt -= i;
478 cnt -= i;
479 if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
480 return -1;
481 bc->hdlctx.bufptr += i;
482 break;
483
484 case tx_tail:
485 encode_hdlc(bc);
486 if (bc->hdlctx.bufcnt > 0) {
487 bc->hdlctx.state = tx_data;
488 break;
489 }
490 i = min_t(int, cnt, bc->hdlctx.flags);
491 if (i) {
492 cnt -= i;
493 bc->hdlctx.flags -= i;
494 memset(tmp, 0x7e, sizeof(tmp));
495 while (i > 0) {
496 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
497 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
498 return -1;
499 i -= j;
500 }
501 break;
502 }
503 fallthrough;
504
505 default:
506 if (bc->hdlctx.calibrate <= 0)
507 return 0;
508 i = min_t(int, cnt, bc->hdlctx.calibrate);
509 cnt -= i;
510 bc->hdlctx.calibrate -= i;
511 memset(tmp, 0, sizeof(tmp));
512 while (i > 0) {
513 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
514 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
515 return -1;
516 i -= j;
517 }
518 break;
519 }
520 }
521 return 0;
522}
523
524/* ---------------------------------------------------------------------- */
525
526static void do_rxpacket(struct net_device *dev)
527{
528 struct baycom_state *bc = netdev_priv(dev);
529 struct sk_buff *skb;
530 unsigned char *cp;
531 unsigned pktlen;
532
533 if (bc->hdlcrx.bufcnt < 4)
534 return;
535 if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt))
536 return;
537 pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
538 if (!(skb = dev_alloc_skb(pktlen))) {
539 printk("%s: memory squeeze, dropping packet\n", dev->name);
540 dev->stats.rx_dropped++;
541 return;
542 }
543 cp = skb_put(skb, pktlen);
544 *cp++ = 0; /* KISS kludge */
545 memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
546 skb->protocol = ax25_type_trans(skb, dev);
547 netif_rx(skb);
548 dev->stats.rx_packets++;
549}
550
551static int receive(struct net_device *dev, int cnt)
552{
553 struct baycom_state *bc = netdev_priv(dev);
554 struct parport *pp = bc->pdev->port;
555 unsigned int bitbuf, notbitstream, bitstream, numbits, state;
556 unsigned char tmp[128];
557 unsigned char *cp;
558 int cnt2, ret = 0;
559 int j;
560
561 numbits = bc->hdlcrx.numbits;
562 state = bc->hdlcrx.state;
563 bitstream = bc->hdlcrx.bitstream;
564 bitbuf = bc->hdlcrx.bitbuf;
565 while (cnt > 0) {
566 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
567 cnt -= cnt2;
568 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
569 ret = -1;
570 break;
571 }
572 cp = tmp;
573 for (; cnt2 > 0; cnt2--, cp++) {
574 bitstream >>= 8;
575 bitstream |= (*cp) << 8;
576 bitbuf >>= 8;
577 bitbuf |= (*cp) << 8;
578 numbits += 8;
579 notbitstream = ~bitstream;
580 for (j = 0; j < 8; j++) {
581
582 /* flag or abort */
583 if (unlikely(!(notbitstream & (0x0fc << j)))) {
584
585 /* abort received */
586 if (!(notbitstream & (0x1fc << j)))
587 state = 0;
588
589 /* flag received */
590 else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) {
591 if (state)
592 do_rxpacket(dev);
593 bc->hdlcrx.bufcnt = 0;
594 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
595 state = 1;
596 numbits = 7-j;
597 }
598 }
599
600 /* stuffed bit */
601 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
602 numbits--;
603 bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
604 }
605 }
606 while (state && numbits >= 8) {
607 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
608 state = 0;
609 } else {
610 *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
611 bc->hdlcrx.bufcnt++;
612 numbits -= 8;
613 }
614 }
615 }
616 }
617 bc->hdlcrx.numbits = numbits;
618 bc->hdlcrx.state = state;
619 bc->hdlcrx.bitstream = bitstream;
620 bc->hdlcrx.bitbuf = bitbuf;
621 return ret;
622}
623
624/* --------------------------------------------------------------------- */
625
626#if defined(__i386__) && !defined(CONFIG_UML)
627#include <asm/msr.h>
628#define GETTICK(x) \
629({ \
630 if (boot_cpu_has(X86_FEATURE_TSC)) \
631 x = (unsigned int)rdtsc(); \
632})
633#else /* __i386__ && !CONFIG_UML */
634#define GETTICK(x)
635#endif /* __i386__ && !CONFIG_UML */
636
637static void epp_bh(struct work_struct *work)
638{
639 struct net_device *dev;
640 struct baycom_state *bc;
641 struct parport *pp;
642 unsigned char stat;
643 unsigned char tmp[2];
644 unsigned int time1 = 0, time2 = 0, time3 = 0;
645 int cnt, cnt2;
646
647 bc = container_of(work, struct baycom_state, run_work.work);
648 dev = bc->dev;
649 if (!bc->work_running)
650 return;
651 baycom_int_freq(bc);
652 pp = bc->pdev->port;
653 /* update status */
654 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
655 goto epptimeout;
656 bc->stat = stat;
657 bc->debug_vals.last_pllcorr = stat;
658 GETTICK(time1);
659 if (bc->modem == EPP_FPGAEXTSTATUS) {
660 /* get input count */
661 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
662 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
663 goto epptimeout;
664 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
665 goto epptimeout;
666 cnt = tmp[0] | (tmp[1] << 8);
667 cnt &= 0x7fff;
668 /* get output count */
669 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
670 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
671 goto epptimeout;
672 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
673 goto epptimeout;
674 cnt2 = tmp[0] | (tmp[1] << 8);
675 cnt2 = 16384 - (cnt2 & 0x7fff);
676 /* return to normal */
677 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
678 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
679 goto epptimeout;
680 if (transmit(bc, cnt2, stat))
681 goto epptimeout;
682 GETTICK(time2);
683 if (receive(dev, cnt))
684 goto epptimeout;
685 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
686 goto epptimeout;
687 bc->stat = stat;
688 } else {
689 /* try to tx */
690 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
691 case EPP_NTHF:
692 cnt = 2048 - 256;
693 break;
694
695 case EPP_NTAEF:
696 cnt = 2048 - 1793;
697 break;
698
699 case 0:
700 cnt = 0;
701 break;
702
703 default:
704 cnt = 2048 - 1025;
705 break;
706 }
707 if (transmit(bc, cnt, stat))
708 goto epptimeout;
709 GETTICK(time2);
710 /* do receiver */
711 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
712 switch (stat & (EPP_NRAEF|EPP_NRHF)) {
713 case EPP_NRAEF:
714 cnt = 1025;
715 break;
716
717 case 0:
718 cnt = 1793;
719 break;
720
721 default:
722 cnt = 256;
723 break;
724 }
725 if (receive(dev, cnt))
726 goto epptimeout;
727 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
728 goto epptimeout;
729 }
730 cnt = 0;
731 if (bc->bitrate < 50000)
732 cnt = 256;
733 else if (bc->bitrate < 100000)
734 cnt = 128;
735 while (cnt > 0 && stat & EPP_NREF) {
736 if (receive(dev, 1))
737 goto epptimeout;
738 cnt--;
739 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
740 goto epptimeout;
741 }
742 }
743 GETTICK(time3);
744#ifdef BAYCOM_DEBUG
745 bc->debug_vals.mod_cycles = time2 - time1;
746 bc->debug_vals.demod_cycles = time3 - time2;
747#endif /* BAYCOM_DEBUG */
748 schedule_delayed_work(&bc->run_work, 1);
749 if (!bc->skb)
750 netif_wake_queue(dev);
751 return;
752 epptimeout:
753 printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
754}
755
756/* ---------------------------------------------------------------------- */
757/*
758 * ===================== network driver interface =========================
759 */
760
761static netdev_tx_t baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
762{
763 struct baycom_state *bc = netdev_priv(dev);
764
765 if (skb->protocol == htons(ETH_P_IP))
766 return ax25_ip_xmit(skb);
767
768 if (skb->data[0] != 0) {
769 do_kiss_params(bc, skb->data, skb->len);
770 dev_kfree_skb(skb);
771 return NETDEV_TX_OK;
772 }
773 if (bc->skb) {
774 dev_kfree_skb(skb);
775 return NETDEV_TX_OK;
776 }
777 /* strip KISS byte */
778 if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
779 dev_kfree_skb(skb);
780 return NETDEV_TX_OK;
781 }
782 netif_stop_queue(dev);
783 bc->skb = skb;
784 return NETDEV_TX_OK;
785}
786
787/* --------------------------------------------------------------------- */
788
789static int baycom_set_mac_address(struct net_device *dev, void *addr)
790{
791 struct sockaddr *sa = (struct sockaddr *)addr;
792
793 /* addr is an AX.25 shifted ASCII mac address */
794 dev_addr_set(dev, sa->sa_data);
795 return 0;
796}
797
798/* --------------------------------------------------------------------- */
799
800static void epp_wakeup(void *handle)
801{
802 struct net_device *dev = (struct net_device *)handle;
803 struct baycom_state *bc = netdev_priv(dev);
804
805 printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
806 if (!parport_claim(bc->pdev))
807 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
808}
809
810/* --------------------------------------------------------------------- */
811
812/*
813 * Open/initialize the board. This is called (in the current kernel)
814 * sometime after booting when the 'ifconfig' program is run.
815 *
816 * This routine should set everything up anew at each open, even
817 * registers that "should" only need to be set once at boot, so that
818 * there is non-reboot way to recover if something goes wrong.
819 */
820
821static int epp_open(struct net_device *dev)
822{
823 struct baycom_state *bc = netdev_priv(dev);
824 struct parport *pp = parport_find_base(dev->base_addr);
825 unsigned int i, j;
826 unsigned char tmp[128];
827 unsigned char stat;
828 unsigned long tstart;
829 struct pardev_cb par_cb;
830
831 if (!pp) {
832 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
833 return -ENXIO;
834 }
835#if 0
836 if (pp->irq < 0) {
837 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
838 parport_put_port(pp);
839 return -ENXIO;
840 }
841#endif
842 if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
843 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
844 bc_drvname, pp->base);
845 parport_put_port(pp);
846 return -EIO;
847 }
848 memset(&bc->modem, 0, sizeof(bc->modem));
849 memset(&par_cb, 0, sizeof(par_cb));
850 par_cb.wakeup = epp_wakeup;
851 par_cb.private = (void *)dev;
852 par_cb.flags = PARPORT_DEV_EXCL;
853 for (i = 0; i < NR_PORTS; i++)
854 if (baycom_device[i] == dev)
855 break;
856
857 if (i == NR_PORTS) {
858 pr_err("%s: no device found\n", bc_drvname);
859 parport_put_port(pp);
860 return -ENODEV;
861 }
862
863 bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i);
864 parport_put_port(pp);
865 if (!bc->pdev) {
866 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
867 return -ENXIO;
868 }
869 if (parport_claim(bc->pdev)) {
870 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
871 parport_unregister_device(bc->pdev);
872 return -EBUSY;
873 }
874 dev->irq = /*pp->irq*/ 0;
875 INIT_DELAYED_WORK(&bc->run_work, epp_bh);
876 bc->work_running = 1;
877 bc->modem = EPP_CONVENTIONAL;
878 if (eppconfig(bc))
879 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
880 else
881 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
882 parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
883 /* reset the modem */
884 tmp[0] = 0;
885 tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
886 if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
887 goto epptimeout;
888 /* autoprobe baud rate */
889 tstart = jiffies;
890 i = 0;
891 while (time_before(jiffies, tstart + HZ/3)) {
892 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
893 goto epptimeout;
894 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
895 schedule();
896 continue;
897 }
898 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
899 goto epptimeout;
900 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
901 goto epptimeout;
902 i += 256;
903 }
904 for (j = 0; j < 256; j++) {
905 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
906 goto epptimeout;
907 if (!(stat & EPP_NREF))
908 break;
909 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
910 goto epptimeout;
911 i++;
912 }
913 tstart = jiffies - tstart;
914 bc->bitrate = i * (8 * HZ) / tstart;
915 j = 1;
916 i = bc->bitrate >> 3;
917 while (j < 7 && i > 150) {
918 j++;
919 i >>= 1;
920 }
921 printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n",
922 bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
923 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
924 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
925 goto epptimeout;
926 /*
927 * initialise hdlc variables
928 */
929 bc->hdlcrx.state = 0;
930 bc->hdlcrx.numbits = 0;
931 bc->hdlctx.state = tx_idle;
932 bc->hdlctx.bufcnt = 0;
933 bc->hdlctx.slotcnt = bc->ch_params.slottime;
934 bc->hdlctx.calibrate = 0;
935 /* start the bottom half stuff */
936 schedule_delayed_work(&bc->run_work, 1);
937 netif_start_queue(dev);
938 return 0;
939
940 epptimeout:
941 printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
942 parport_write_control(pp, 0); /* reset the adapter */
943 parport_release(bc->pdev);
944 parport_unregister_device(bc->pdev);
945 return -EIO;
946}
947
948/* --------------------------------------------------------------------- */
949
950static int epp_close(struct net_device *dev)
951{
952 struct baycom_state *bc = netdev_priv(dev);
953 struct parport *pp = bc->pdev->port;
954 unsigned char tmp[1];
955
956 bc->work_running = 0;
957 cancel_delayed_work_sync(&bc->run_work);
958 bc->stat = EPP_DCDBIT;
959 tmp[0] = 0;
960 pp->ops->epp_write_addr(pp, tmp, 1, 0);
961 parport_write_control(pp, 0); /* reset the adapter */
962 parport_release(bc->pdev);
963 parport_unregister_device(bc->pdev);
964 dev_kfree_skb(bc->skb);
965 bc->skb = NULL;
966 printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
967 bc_drvname, dev->base_addr, dev->irq);
968 return 0;
969}
970
971/* --------------------------------------------------------------------- */
972
973static int baycom_setmode(struct baycom_state *bc, const char *modestr)
974{
975 const char *cp;
976
977 if (strstr(modestr,"intclk"))
978 bc->cfg.intclk = 1;
979 if (strstr(modestr,"extclk"))
980 bc->cfg.intclk = 0;
981 if (strstr(modestr,"intmodem"))
982 bc->cfg.extmodem = 0;
983 if (strstr(modestr,"extmodem"))
984 bc->cfg.extmodem = 1;
985 if (strstr(modestr,"loopback"))
986 bc->cfg.loopback = 1;
987 if (strstr(modestr, "noloopback"))
988 bc->cfg.loopback = 0;
989 if ((cp = strstr(modestr,"fclk="))) {
990 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
991 if (bc->cfg.fclk < 1000000)
992 bc->cfg.fclk = 1000000;
993 if (bc->cfg.fclk > 25000000)
994 bc->cfg.fclk = 25000000;
995 }
996 if ((cp = strstr(modestr,"bps="))) {
997 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
998 if (bc->cfg.bps < 1000)
999 bc->cfg.bps = 1000;
1000 if (bc->cfg.bps > 1500000)
1001 bc->cfg.bps = 1500000;
1002 }
1003 return 0;
1004}
1005
1006/* --------------------------------------------------------------------- */
1007
1008static int baycom_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
1009 void __user *data, int cmd)
1010{
1011 struct baycom_state *bc = netdev_priv(dev);
1012 struct hdlcdrv_ioctl hi;
1013
1014 if (cmd != SIOCDEVPRIVATE)
1015 return -ENOIOCTLCMD;
1016
1017 if (copy_from_user(&hi, data, sizeof(hi)))
1018 return -EFAULT;
1019 switch (hi.cmd) {
1020 default:
1021 return -ENOIOCTLCMD;
1022
1023 case HDLCDRVCTL_GETCHANNELPAR:
1024 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1025 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1026 hi.data.cp.slottime = bc->ch_params.slottime;
1027 hi.data.cp.ppersist = bc->ch_params.ppersist;
1028 hi.data.cp.fulldup = bc->ch_params.fulldup;
1029 break;
1030
1031 case HDLCDRVCTL_SETCHANNELPAR:
1032 if (!capable(CAP_NET_ADMIN))
1033 return -EACCES;
1034 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1035 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1036 bc->ch_params.slottime = hi.data.cp.slottime;
1037 bc->ch_params.ppersist = hi.data.cp.ppersist;
1038 bc->ch_params.fulldup = hi.data.cp.fulldup;
1039 bc->hdlctx.slotcnt = 1;
1040 return 0;
1041
1042 case HDLCDRVCTL_GETMODEMPAR:
1043 hi.data.mp.iobase = dev->base_addr;
1044 hi.data.mp.irq = dev->irq;
1045 hi.data.mp.dma = dev->dma;
1046 hi.data.mp.dma2 = 0;
1047 hi.data.mp.seriobase = 0;
1048 hi.data.mp.pariobase = 0;
1049 hi.data.mp.midiiobase = 0;
1050 break;
1051
1052 case HDLCDRVCTL_SETMODEMPAR:
1053 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1054 return -EACCES;
1055 dev->base_addr = hi.data.mp.iobase;
1056 dev->irq = /*hi.data.mp.irq*/0;
1057 dev->dma = /*hi.data.mp.dma*/0;
1058 return 0;
1059
1060 case HDLCDRVCTL_GETSTAT:
1061 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1062 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1063 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1064 hi.data.cs.tx_packets = dev->stats.tx_packets;
1065 hi.data.cs.tx_errors = dev->stats.tx_errors;
1066 hi.data.cs.rx_packets = dev->stats.rx_packets;
1067 hi.data.cs.rx_errors = dev->stats.rx_errors;
1068 break;
1069
1070 case HDLCDRVCTL_OLDGETSTAT:
1071 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1072 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1073 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1074 break;
1075
1076 case HDLCDRVCTL_CALIBRATE:
1077 if (!capable(CAP_SYS_RAWIO))
1078 return -EACCES;
1079 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1080 return 0;
1081
1082 case HDLCDRVCTL_DRIVERNAME:
1083 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1084 break;
1085
1086 case HDLCDRVCTL_GETMODE:
1087 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
1088 bc->cfg.intclk ? "int" : "ext",
1089 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1090 bc->cfg.loopback ? ",loopback" : "");
1091 break;
1092
1093 case HDLCDRVCTL_SETMODE:
1094 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1095 return -EACCES;
1096 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1097 return baycom_setmode(bc, hi.data.modename);
1098
1099 case HDLCDRVCTL_MODELIST:
1100 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1101 sizeof(hi.data.modename));
1102 break;
1103
1104 case HDLCDRVCTL_MODEMPARMASK:
1105 return HDLCDRV_PARMASK_IOBASE;
1106
1107 }
1108 if (copy_to_user(data, &hi, sizeof(hi)))
1109 return -EFAULT;
1110 return 0;
1111}
1112
1113/* --------------------------------------------------------------------- */
1114
1115static const struct net_device_ops baycom_netdev_ops = {
1116 .ndo_open = epp_open,
1117 .ndo_stop = epp_close,
1118 .ndo_siocdevprivate = baycom_siocdevprivate,
1119 .ndo_start_xmit = baycom_send_packet,
1120 .ndo_set_mac_address = baycom_set_mac_address,
1121};
1122
1123/*
1124 * Check for a network adaptor of this type, and return '0' if one exists.
1125 * If dev->base_addr == 0, probe all likely locations.
1126 * If dev->base_addr == 1, always return failure.
1127 * If dev->base_addr == 2, allocate space for the device and return success
1128 * (detachable devices only).
1129 */
1130static void baycom_probe(struct net_device *dev)
1131{
1132 const struct hdlcdrv_channel_params dflt_ch_params = {
1133 20, 2, 10, 40, 0
1134 };
1135 struct baycom_state *bc;
1136
1137 /*
1138 * not a real probe! only initialize data structures
1139 */
1140 bc = netdev_priv(dev);
1141 /*
1142 * initialize the baycom_state struct
1143 */
1144 bc->ch_params = dflt_ch_params;
1145 bc->ptt_keyed = 0;
1146
1147 /*
1148 * initialize the device struct
1149 */
1150
1151 /* Fill in the fields of the device structure */
1152 bc->skb = NULL;
1153
1154 dev->netdev_ops = &baycom_netdev_ops;
1155 dev->header_ops = &ax25_header_ops;
1156
1157 dev->type = ARPHRD_AX25; /* AF_AX25 device */
1158 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1159 dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
1160 dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
1161 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1162 dev_addr_set(dev, (u8 *)&null_ax25_address);
1163 dev->tx_queue_len = 16;
1164
1165 /* New style flags */
1166 dev->flags = 0;
1167}
1168
1169/* --------------------------------------------------------------------- */
1170
1171/*
1172 * command line settable parameters
1173 */
1174static char *mode[NR_PORTS] = { "", };
1175static int iobase[NR_PORTS] = { 0x378, };
1176
1177module_param_array(mode, charp, NULL, 0);
1178MODULE_PARM_DESC(mode, "baycom operating mode");
1179module_param_hw_array(iobase, int, ioport, NULL, 0);
1180MODULE_PARM_DESC(iobase, "baycom io base address");
1181
1182MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1183MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1184MODULE_LICENSE("GPL");
1185
1186/* --------------------------------------------------------------------- */
1187
1188static int baycom_epp_par_probe(struct pardevice *par_dev)
1189{
1190 struct device_driver *drv = par_dev->dev.driver;
1191 int len = strlen(drv->name);
1192
1193 if (strncmp(par_dev->name, drv->name, len))
1194 return -ENODEV;
1195
1196 return 0;
1197}
1198
1199static struct parport_driver baycom_epp_par_driver = {
1200 .name = "bce",
1201 .probe = baycom_epp_par_probe,
1202 .devmodel = true,
1203};
1204
1205static void __init baycom_epp_dev_setup(struct net_device *dev)
1206{
1207 struct baycom_state *bc = netdev_priv(dev);
1208
1209 /*
1210 * initialize part of the baycom_state struct
1211 */
1212 bc->dev = dev;
1213 bc->magic = BAYCOM_MAGIC;
1214 bc->cfg.fclk = 19666600;
1215 bc->cfg.bps = 9600;
1216 /*
1217 * initialize part of the device struct
1218 */
1219 baycom_probe(dev);
1220}
1221
1222static int __init init_baycomepp(void)
1223{
1224 int i, found = 0, ret;
1225 char set_hw = 1;
1226
1227 printk(bc_drvinfo);
1228
1229 ret = parport_register_driver(&baycom_epp_par_driver);
1230 if (ret)
1231 return ret;
1232
1233 /*
1234 * register net devices
1235 */
1236 for (i = 0; i < NR_PORTS; i++) {
1237 struct net_device *dev;
1238
1239 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1240 NET_NAME_UNKNOWN, baycom_epp_dev_setup);
1241
1242 if (!dev) {
1243 printk(KERN_WARNING "bce%d : out of memory\n", i);
1244 return found ? 0 : -ENOMEM;
1245 }
1246
1247 sprintf(dev->name, "bce%d", i);
1248 dev->base_addr = iobase[i];
1249
1250 if (!mode[i])
1251 set_hw = 0;
1252 if (!set_hw)
1253 iobase[i] = 0;
1254
1255 if (register_netdev(dev)) {
1256 printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1257 free_netdev(dev);
1258 break;
1259 }
1260 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1261 set_hw = 0;
1262 baycom_device[i] = dev;
1263 found++;
1264 }
1265
1266 if (found == 0) {
1267 parport_unregister_driver(&baycom_epp_par_driver);
1268 return -ENXIO;
1269 }
1270
1271 return 0;
1272}
1273
1274static void __exit cleanup_baycomepp(void)
1275{
1276 int i;
1277
1278 for(i = 0; i < NR_PORTS; i++) {
1279 struct net_device *dev = baycom_device[i];
1280
1281 if (dev) {
1282 struct baycom_state *bc = netdev_priv(dev);
1283 if (bc->magic == BAYCOM_MAGIC) {
1284 unregister_netdev(dev);
1285 free_netdev(dev);
1286 } else
1287 printk(paranoia_str, "cleanup_module");
1288 }
1289 }
1290 parport_unregister_driver(&baycom_epp_par_driver);
1291}
1292
1293module_init(init_baycomepp);
1294module_exit(cleanup_baycomepp);
1295
1296/* --------------------------------------------------------------------- */
1297
1298#ifndef MODULE
1299
1300/*
1301 * format: baycom_epp=io,mode
1302 * mode: fpga config options
1303 */
1304
1305static int __init baycom_epp_setup(char *str)
1306{
1307 static unsigned __initdata nr_dev = 0;
1308 int ints[2];
1309
1310 if (nr_dev >= NR_PORTS)
1311 return 0;
1312 str = get_options(str, 2, ints);
1313 if (ints[0] < 1)
1314 return 0;
1315 mode[nr_dev] = str;
1316 iobase[nr_dev] = ints[1];
1317 nr_dev++;
1318 return 1;
1319}
1320
1321__setup("baycom_epp=", baycom_epp_setup);
1322
1323#endif /* MODULE */
1324/* --------------------------------------------------------------------- */