Linux Audio

Check our new training course

Loading...
v5.14.15
  1// SPDX-License-Identifier: GPL-2.0
  2/* Copyright 2011-2014 Autronica Fire and Security AS
  3 *
  4 * Author(s):
  5 *	2011-2014 Arvid Brodin, arvid.brodin@alten.se
  6 *
  7 * Frame handler other utility functions for HSR and PRP.
  8 */
  9
 10#include "hsr_slave.h"
 11#include <linux/etherdevice.h>
 12#include <linux/if_arp.h>
 13#include <linux/if_vlan.h>
 14#include "hsr_main.h"
 15#include "hsr_device.h"
 16#include "hsr_forward.h"
 17#include "hsr_framereg.h"
 18
 19bool hsr_invalid_dan_ingress_frame(__be16 protocol)
 20{
 21	return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
 22}
 23
 24static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
 25{
 26	struct sk_buff *skb = *pskb;
 27	struct hsr_port *port;
 28	struct hsr_priv *hsr;
 29	__be16 protocol;
 30
 31	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
 32	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
 33		return RX_HANDLER_PASS;
 34
 35	if (!skb_mac_header_was_set(skb)) {
 36		WARN_ONCE(1, "%s: skb invalid", __func__);
 37		return RX_HANDLER_PASS;
 38	}
 39
 40	port = hsr_port_get_rcu(skb->dev);
 41	if (!port)
 42		goto finish_pass;
 43	hsr = port->hsr;
 44
 45	if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
 46		/* Directly kill frames sent by ourselves */
 47		kfree_skb(skb);
 48		goto finish_consume;
 49	}
 50
 51	/* For HSR, only tagged frames are expected (unless the device offloads
 52	 * HSR tag removal), but for PRP there could be non tagged frames as
 53	 * well from Single attached nodes (SANs).
 54	 */
 55	protocol = eth_hdr(skb)->h_proto;
 56
 57	if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
 
 58	    hsr->proto_ops->invalid_dan_ingress_frame &&
 59	    hsr->proto_ops->invalid_dan_ingress_frame(protocol))
 60		goto finish_pass;
 61
 62	skb_push(skb, ETH_HLEN);
 63	skb_reset_mac_header(skb);
 64	if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
 65	    protocol == htons(ETH_P_HSR))
 66		skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
 67	skb_reset_mac_len(skb);
 68
 69	hsr_forward_skb(skb, port);
 
 
 
 
 
 
 
 
 
 70
 71finish_consume:
 72	return RX_HANDLER_CONSUMED;
 73
 74finish_pass:
 75	return RX_HANDLER_PASS;
 76}
 77
 78bool hsr_port_exists(const struct net_device *dev)
 79{
 80	return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
 81}
 82
 83static int hsr_check_dev_ok(struct net_device *dev,
 84			    struct netlink_ext_ack *extack)
 85{
 86	/* Don't allow HSR on non-ethernet like devices */
 87	if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
 88	    dev->addr_len != ETH_ALEN) {
 89		NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
 90		return -EINVAL;
 91	}
 92
 93	/* Don't allow enslaving hsr devices */
 94	if (is_hsr_master(dev)) {
 95		NL_SET_ERR_MSG_MOD(extack,
 96				   "Cannot create trees of HSR devices.");
 97		return -EINVAL;
 98	}
 99
100	if (hsr_port_exists(dev)) {
101		NL_SET_ERR_MSG_MOD(extack,
102				   "This device is already a HSR slave.");
103		return -EINVAL;
104	}
105
106	if (is_vlan_dev(dev)) {
107		NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
108		return -EINVAL;
109	}
110
111	if (dev->priv_flags & IFF_DONT_BRIDGE) {
112		NL_SET_ERR_MSG_MOD(extack,
113				   "This device does not support bridging.");
114		return -EOPNOTSUPP;
115	}
116
117	/* HSR over bonded devices has not been tested, but I'm not sure it
118	 * won't work...
119	 */
120
121	return 0;
122}
123
124/* Setup device to be added to the HSR bridge. */
125static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
126			     struct hsr_port *port,
127			     struct netlink_ext_ack *extack)
128
129{
130	struct net_device *hsr_dev;
131	struct hsr_port *master;
132	int res;
133
134	res = dev_set_promiscuity(dev, 1);
135	if (res)
136		return res;
 
 
 
 
 
137
138	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
139	hsr_dev = master->dev;
140
141	res = netdev_upper_dev_link(dev, hsr_dev, extack);
142	if (res)
143		goto fail_upper_dev_link;
144
145	res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
146	if (res)
147		goto fail_rx_handler;
148	dev_disable_lro(dev);
149
150	return 0;
151
152fail_rx_handler:
153	netdev_upper_dev_unlink(dev, hsr_dev);
154fail_upper_dev_link:
155	dev_set_promiscuity(dev, -1);
 
 
156	return res;
157}
158
159int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
160		 enum hsr_port_type type, struct netlink_ext_ack *extack)
161{
162	struct hsr_port *port, *master;
163	int res;
164
165	if (type != HSR_PT_MASTER) {
166		res = hsr_check_dev_ok(dev, extack);
167		if (res)
168			return res;
169	}
170
171	port = hsr_port_get_hsr(hsr, type);
172	if (port)
173		return -EBUSY;	/* This port already exists */
174
175	port = kzalloc(sizeof(*port), GFP_KERNEL);
176	if (!port)
177		return -ENOMEM;
178
179	port->hsr = hsr;
180	port->dev = dev;
181	port->type = type;
182
183	if (type != HSR_PT_MASTER) {
184		res = hsr_portdev_setup(hsr, dev, port, extack);
185		if (res)
186			goto fail_dev_setup;
187	}
188
189	list_add_tail_rcu(&port->port_list, &hsr->ports);
190	synchronize_rcu();
191
192	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
193	netdev_update_features(master->dev);
194	dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
195
196	return 0;
197
198fail_dev_setup:
199	kfree(port);
200	return res;
201}
202
203void hsr_del_port(struct hsr_port *port)
204{
205	struct hsr_priv *hsr;
206	struct hsr_port *master;
207
208	hsr = port->hsr;
209	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
210	list_del_rcu(&port->port_list);
211
212	if (port != master) {
213		netdev_update_features(master->dev);
214		dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
215		netdev_rx_handler_unregister(port->dev);
216		dev_set_promiscuity(port->dev, -1);
 
217		netdev_upper_dev_unlink(port->dev, master->dev);
218	}
219
220	synchronize_rcu();
221
222	kfree(port);
223}
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0
  2/* Copyright 2011-2014 Autronica Fire and Security AS
  3 *
  4 * Author(s):
  5 *	2011-2014 Arvid Brodin, arvid.brodin@alten.se
  6 *
  7 * Frame handler other utility functions for HSR and PRP.
  8 */
  9
 10#include "hsr_slave.h"
 11#include <linux/etherdevice.h>
 12#include <linux/if_arp.h>
 13#include <linux/if_vlan.h>
 14#include "hsr_main.h"
 15#include "hsr_device.h"
 16#include "hsr_forward.h"
 17#include "hsr_framereg.h"
 18
 19bool hsr_invalid_dan_ingress_frame(__be16 protocol)
 20{
 21	return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
 22}
 23
 24static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
 25{
 26	struct sk_buff *skb = *pskb;
 27	struct hsr_port *port;
 28	struct hsr_priv *hsr;
 29	__be16 protocol;
 30
 31	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
 32	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
 33		return RX_HANDLER_PASS;
 34
 35	if (!skb_mac_header_was_set(skb)) {
 36		WARN_ONCE(1, "%s: skb invalid", __func__);
 37		return RX_HANDLER_PASS;
 38	}
 39
 40	port = hsr_port_get_rcu(skb->dev);
 41	if (!port)
 42		goto finish_pass;
 43	hsr = port->hsr;
 44
 45	if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
 46		/* Directly kill frames sent by ourselves */
 47		kfree_skb(skb);
 48		goto finish_consume;
 49	}
 50
 51	/* For HSR, only tagged frames are expected (unless the device offloads
 52	 * HSR tag removal), but for PRP there could be non tagged frames as
 53	 * well from Single attached nodes (SANs).
 54	 */
 55	protocol = eth_hdr(skb)->h_proto;
 56
 57	if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
 58	    port->type != HSR_PT_INTERLINK &&
 59	    hsr->proto_ops->invalid_dan_ingress_frame &&
 60	    hsr->proto_ops->invalid_dan_ingress_frame(protocol))
 61		goto finish_pass;
 62
 63	skb_push(skb, ETH_HLEN);
 64	skb_reset_mac_header(skb);
 65	if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
 66	    protocol == htons(ETH_P_HSR))
 67		skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
 68	skb_reset_mac_len(skb);
 69
 70	/* Only the frames received over the interlink port will assign a
 71	 * sequence number and require synchronisation vs other sender.
 72	 */
 73	if (port->type == HSR_PT_INTERLINK) {
 74		spin_lock_bh(&hsr->seqnr_lock);
 75		hsr_forward_skb(skb, port);
 76		spin_unlock_bh(&hsr->seqnr_lock);
 77	} else {
 78		hsr_forward_skb(skb, port);
 79	}
 80
 81finish_consume:
 82	return RX_HANDLER_CONSUMED;
 83
 84finish_pass:
 85	return RX_HANDLER_PASS;
 86}
 87
 88bool hsr_port_exists(const struct net_device *dev)
 89{
 90	return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
 91}
 92
 93static int hsr_check_dev_ok(struct net_device *dev,
 94			    struct netlink_ext_ack *extack)
 95{
 96	/* Don't allow HSR on non-ethernet like devices */
 97	if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
 98	    dev->addr_len != ETH_ALEN) {
 99		NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
100		return -EINVAL;
101	}
102
103	/* Don't allow enslaving hsr devices */
104	if (is_hsr_master(dev)) {
105		NL_SET_ERR_MSG_MOD(extack,
106				   "Cannot create trees of HSR devices.");
107		return -EINVAL;
108	}
109
110	if (hsr_port_exists(dev)) {
111		NL_SET_ERR_MSG_MOD(extack,
112				   "This device is already a HSR slave.");
113		return -EINVAL;
114	}
115
116	if (is_vlan_dev(dev)) {
117		NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
118		return -EINVAL;
119	}
120
121	if (dev->priv_flags & IFF_DONT_BRIDGE) {
122		NL_SET_ERR_MSG_MOD(extack,
123				   "This device does not support bridging.");
124		return -EOPNOTSUPP;
125	}
126
127	/* HSR over bonded devices has not been tested, but I'm not sure it
128	 * won't work...
129	 */
130
131	return 0;
132}
133
134/* Setup device to be added to the HSR bridge. */
135static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
136			     struct hsr_port *port,
137			     struct netlink_ext_ack *extack)
138
139{
140	struct net_device *hsr_dev;
141	struct hsr_port *master;
142	int res;
143
144	/* Don't use promiscuous mode for offload since L2 frame forward
145	 * happens at the offloaded hardware.
146	 */
147	if (!port->hsr->fwd_offloaded) {
148		res = dev_set_promiscuity(dev, 1);
149		if (res)
150			return res;
151	}
152
153	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
154	hsr_dev = master->dev;
155
156	res = netdev_upper_dev_link(dev, hsr_dev, extack);
157	if (res)
158		goto fail_upper_dev_link;
159
160	res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
161	if (res)
162		goto fail_rx_handler;
163	dev_disable_lro(dev);
164
165	return 0;
166
167fail_rx_handler:
168	netdev_upper_dev_unlink(dev, hsr_dev);
169fail_upper_dev_link:
170	if (!port->hsr->fwd_offloaded)
171		dev_set_promiscuity(dev, -1);
172
173	return res;
174}
175
176int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
177		 enum hsr_port_type type, struct netlink_ext_ack *extack)
178{
179	struct hsr_port *port, *master;
180	int res;
181
182	if (type != HSR_PT_MASTER) {
183		res = hsr_check_dev_ok(dev, extack);
184		if (res)
185			return res;
186	}
187
188	port = hsr_port_get_hsr(hsr, type);
189	if (port)
190		return -EBUSY;	/* This port already exists */
191
192	port = kzalloc(sizeof(*port), GFP_KERNEL);
193	if (!port)
194		return -ENOMEM;
195
196	port->hsr = hsr;
197	port->dev = dev;
198	port->type = type;
199
200	if (type != HSR_PT_MASTER) {
201		res = hsr_portdev_setup(hsr, dev, port, extack);
202		if (res)
203			goto fail_dev_setup;
204	}
205
206	list_add_tail_rcu(&port->port_list, &hsr->ports);
207	synchronize_rcu();
208
209	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
210	netdev_update_features(master->dev);
211	dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
212
213	return 0;
214
215fail_dev_setup:
216	kfree(port);
217	return res;
218}
219
220void hsr_del_port(struct hsr_port *port)
221{
222	struct hsr_priv *hsr;
223	struct hsr_port *master;
224
225	hsr = port->hsr;
226	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
227	list_del_rcu(&port->port_list);
228
229	if (port != master) {
230		netdev_update_features(master->dev);
231		dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
232		netdev_rx_handler_unregister(port->dev);
233		if (!port->hsr->fwd_offloaded)
234			dev_set_promiscuity(port->dev, -1);
235		netdev_upper_dev_unlink(port->dev, master->dev);
236	}
237
238	synchronize_rcu();
239
240	kfree(port);
241}