Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
16 nand = &gpmi;
17 ssi0 = &ssi1;
18 usb0 = &usbh1;
19 usb1 = &usbotg;
20 };
21
22 chosen {
23 bootargs = "console=ttymxc1,115200";
24 };
25
26 backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm4 0 5000000>;
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 user-pb {
37 label = "user_pb";
38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
39 linux,code = <BTN_0>;
40 };
41
42 user-pb1x {
43 label = "user_pb1x";
44 linux,code = <BTN_1>;
45 interrupt-parent = <&gsc>;
46 interrupts = <0>;
47 };
48
49 key-erased {
50 label = "key-erased";
51 linux,code = <BTN_2>;
52 interrupt-parent = <&gsc>;
53 interrupts = <1>;
54 };
55
56 eeprom-wp {
57 label = "eeprom_wp";
58 linux,code = <BTN_3>;
59 interrupt-parent = <&gsc>;
60 interrupts = <2>;
61 };
62
63 tamper {
64 label = "tamper";
65 linux,code = <BTN_4>;
66 interrupt-parent = <&gsc>;
67 interrupts = <5>;
68 };
69
70 switch-hold {
71 label = "switch_hold";
72 linux,code = <BTN_5>;
73 interrupt-parent = <&gsc>;
74 interrupts = <7>;
75 };
76 };
77
78 leds {
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_gpio_leds>;
82
83 led0: user1 {
84 label = "user1";
85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
86 default-state = "on";
87 linux,default-trigger = "heartbeat";
88 };
89
90 led1: user2 {
91 label = "user2";
92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
93 default-state = "off";
94 };
95
96 led2: user3 {
97 label = "user3";
98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
99 default-state = "off";
100 };
101 };
102
103 memory@10000000 {
104 device_type = "memory";
105 reg = <0x10000000 0x20000000>;
106 };
107
108 pps {
109 compatible = "pps-gpio";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_pps>;
112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
113 status = "okay";
114 };
115
116 reg_1p0v: regulator-1p0v {
117 compatible = "regulator-fixed";
118 regulator-name = "1P0V";
119 regulator-min-microvolt = <1000000>;
120 regulator-max-microvolt = <1000000>;
121 regulator-always-on;
122 };
123
124 reg_3p3v: regulator-3p3v {
125 compatible = "regulator-fixed";
126 regulator-name = "3P3V";
127 regulator-min-microvolt = <3300000>;
128 regulator-max-microvolt = <3300000>;
129 regulator-always-on;
130 };
131
132 reg_5p0v: regulator-5p0v {
133 compatible = "regulator-fixed";
134 regulator-name = "5P0V";
135 regulator-min-microvolt = <5000000>;
136 regulator-max-microvolt = <5000000>;
137 regulator-always-on;
138 };
139
140 reg_usb_otg_vbus: regulator-usb-otg-vbus {
141 compatible = "regulator-fixed";
142 regulator-name = "usb_otg_vbus";
143 regulator-min-microvolt = <5000000>;
144 regulator-max-microvolt = <5000000>;
145 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
146 enable-active-high;
147 };
148
149 sound {
150 compatible = "fsl,imx6q-ventana-sgtl5000",
151 "fsl,imx-audio-sgtl5000";
152 model = "sgtl5000-audio";
153 ssi-controller = <&ssi1>;
154 audio-codec = <&codec>;
155 audio-routing =
156 "MIC_IN", "Mic Jack",
157 "Mic Jack", "Mic Bias",
158 "Headphone Jack", "HP_OUT";
159 mux-int-port = <1>;
160 mux-ext-port = <4>;
161 };
162};
163
164&audmux {
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_audmux>;
167 status = "okay";
168};
169
170&can1 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&pinctrl_flexcan1>;
173 status = "okay";
174};
175
176&clks {
177 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
178 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
179 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
180 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
181};
182
183&ecspi3 {
184 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_ecspi3>;
187 status = "okay";
188};
189
190&fec {
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_enet>;
193 phy-mode = "rgmii-id";
194 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
195 status = "okay";
196};
197
198&gpmi {
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_gpmi_nand>;
201 status = "okay";
202};
203
204&hdmi {
205 ddc-i2c-bus = <&i2c3>;
206 status = "okay";
207};
208
209&i2c1 {
210 clock-frequency = <100000>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&pinctrl_i2c1>;
213 status = "okay";
214
215 gsc: gsc@20 {
216 compatible = "gw,gsc";
217 reg = <0x20>;
218 interrupt-parent = <&gpio1>;
219 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
220 interrupt-controller;
221 #interrupt-cells = <1>;
222 #size-cells = <0>;
223
224 adc {
225 compatible = "gw,gsc-adc";
226 #address-cells = <1>;
227 #size-cells = <0>;
228
229 channel@0 {
230 gw,mode = <0>;
231 reg = <0x00>;
232 label = "temp";
233 };
234
235 channel@2 {
236 gw,mode = <1>;
237 reg = <0x02>;
238 label = "vdd_vin";
239 };
240
241 channel@5 {
242 gw,mode = <1>;
243 reg = <0x05>;
244 label = "vdd_3p3";
245 };
246
247 channel@8 {
248 gw,mode = <1>;
249 reg = <0x08>;
250 label = "vdd_bat";
251 };
252
253 channel@b {
254 gw,mode = <1>;
255 reg = <0x0b>;
256 label = "vdd_5p0";
257 };
258
259 channel@e {
260 gw,mode = <1>;
261 reg = <0xe>;
262 label = "vdd_arm";
263 };
264
265 channel@11 {
266 gw,mode = <1>;
267 reg = <0x11>;
268 label = "vdd_soc";
269 };
270
271 channel@14 {
272 gw,mode = <1>;
273 reg = <0x14>;
274 label = "vdd_3p0";
275 };
276
277 channel@17 {
278 gw,mode = <1>;
279 reg = <0x17>;
280 label = "vdd_1p5";
281 };
282
283 channel@1d {
284 gw,mode = <1>;
285 reg = <0x1d>;
286 label = "vdd_1p8";
287 };
288
289 channel@20 {
290 gw,mode = <1>;
291 reg = <0x20>;
292 label = "vdd_1p0";
293 };
294
295 channel@23 {
296 gw,mode = <1>;
297 reg = <0x23>;
298 label = "vdd_2p5";
299 };
300
301 channel@29 {
302 gw,mode = <1>;
303 reg = <0x29>;
304 label = "vdd_an1";
305 };
306 };
307 };
308
309 gsc_gpio: gpio@23 {
310 compatible = "nxp,pca9555";
311 reg = <0x23>;
312 gpio-controller;
313 #gpio-cells = <2>;
314 interrupt-parent = <&gsc>;
315 interrupts = <4>;
316 };
317
318 eeprom1: eeprom@50 {
319 compatible = "atmel,24c02";
320 reg = <0x50>;
321 pagesize = <16>;
322 };
323
324 eeprom2: eeprom@51 {
325 compatible = "atmel,24c02";
326 reg = <0x51>;
327 pagesize = <16>;
328 };
329
330 eeprom3: eeprom@52 {
331 compatible = "atmel,24c02";
332 reg = <0x52>;
333 pagesize = <16>;
334 };
335
336 eeprom4: eeprom@53 {
337 compatible = "atmel,24c02";
338 reg = <0x53>;
339 pagesize = <16>;
340 };
341
342 rtc: ds1672@68 {
343 compatible = "dallas,ds1672";
344 reg = <0x68>;
345 };
346};
347
348&i2c2 {
349 clock-frequency = <100000>;
350 pinctrl-names = "default";
351 pinctrl-0 = <&pinctrl_i2c2>;
352 status = "okay";
353
354 ltc3676: pmic@3c {
355 compatible = "lltc,ltc3676";
356 reg = <0x3c>;
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_pmic>;
359 interrupt-parent = <&gpio1>;
360 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
361
362 regulators {
363 /* VDD_SOC (1+R1/R2 = 1.635) */
364 reg_vdd_soc: sw1 {
365 regulator-name = "vddsoc";
366 regulator-min-microvolt = <674400>;
367 regulator-max-microvolt = <1308000>;
368 lltc,fb-voltage-divider = <127000 200000>;
369 regulator-ramp-delay = <7000>;
370 regulator-boot-on;
371 regulator-always-on;
372 };
373
374 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
375 reg_1p8v: sw2 {
376 regulator-name = "vdd1p8";
377 regulator-min-microvolt = <1033310>;
378 regulator-max-microvolt = <2004000>;
379 lltc,fb-voltage-divider = <301000 200000>;
380 regulator-ramp-delay = <7000>;
381 regulator-boot-on;
382 regulator-always-on;
383 };
384
385 /* VDD_ARM (1+R1/R2 = 1.635) */
386 reg_vdd_arm: sw3 {
387 regulator-name = "vddarm";
388 regulator-min-microvolt = <674400>;
389 regulator-max-microvolt = <1308000>;
390 lltc,fb-voltage-divider = <127000 200000>;
391 regulator-ramp-delay = <7000>;
392 regulator-boot-on;
393 regulator-always-on;
394 };
395
396 /* VDD_DDR (1+R1/R2 = 2.105) */
397 reg_vdd_ddr: sw4 {
398 regulator-name = "vddddr";
399 regulator-min-microvolt = <868310>;
400 regulator-max-microvolt = <1684000>;
401 lltc,fb-voltage-divider = <221000 200000>;
402 regulator-ramp-delay = <7000>;
403 regulator-boot-on;
404 regulator-always-on;
405 };
406
407 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
408 reg_2p5v: ldo2 {
409 regulator-name = "vdd2p5";
410 regulator-min-microvolt = <2490375>;
411 regulator-max-microvolt = <2490375>;
412 lltc,fb-voltage-divider = <487000 200000>;
413 regulator-boot-on;
414 regulator-always-on;
415 };
416
417 /* VDD_AUD_1P8: Audio codec */
418 reg_aud_1p8v: ldo3 {
419 regulator-name = "vdd1p8a";
420 regulator-min-microvolt = <1800000>;
421 regulator-max-microvolt = <1800000>;
422 regulator-boot-on;
423 };
424
425 /* VDD_HIGH (1+R1/R2 = 4.17) */
426 reg_3p0v: ldo4 {
427 regulator-name = "vdd3p0";
428 regulator-min-microvolt = <3023250>;
429 regulator-max-microvolt = <3023250>;
430 lltc,fb-voltage-divider = <634000 200000>;
431 regulator-boot-on;
432 regulator-always-on;
433 };
434 };
435 };
436};
437
438&i2c3 {
439 clock-frequency = <100000>;
440 pinctrl-names = "default";
441 pinctrl-0 = <&pinctrl_i2c3>;
442 status = "okay";
443
444 codec: sgtl5000@a {
445 compatible = "fsl,sgtl5000";
446 reg = <0x0a>;
447 clocks = <&clks IMX6QDL_CLK_CKO>;
448 VDDA-supply = <®_1p8v>;
449 VDDIO-supply = <®_3p3v>;
450 };
451
452 touchscreen: egalax_ts@4 {
453 compatible = "eeti,egalax_ts";
454 reg = <0x04>;
455 interrupt-parent = <&gpio7>;
456 interrupts = <12 2>;
457 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
458 };
459
460 accel@1e {
461 compatible = "nxp,fxos8700";
462 reg = <0x1e>;
463 };
464};
465
466&ldb {
467 status = "okay";
468
469 lvds-channel@0 {
470 fsl,data-mapping = "spwg";
471 fsl,data-width = <18>;
472 status = "okay";
473
474 display-timings {
475 native-mode = <&timing0>;
476 timing0: hsd100pxn1 {
477 clock-frequency = <65000000>;
478 hactive = <1024>;
479 vactive = <768>;
480 hback-porch = <220>;
481 hfront-porch = <40>;
482 vback-porch = <21>;
483 vfront-porch = <7>;
484 hsync-len = <60>;
485 vsync-len = <10>;
486 };
487 };
488 };
489};
490
491&pcie {
492 pinctrl-names = "default";
493 pinctrl-0 = <&pinctrl_pcie>;
494 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
495 status = "okay";
496};
497
498&pwm2 {
499 pinctrl-names = "default";
500 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
501 status = "disabled";
502};
503
504&pwm3 {
505 pinctrl-names = "default";
506 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
507 status = "disabled";
508};
509
510&pwm4 {
511 #pwm-cells = <2>;
512 pinctrl-names = "default";
513 pinctrl-0 = <&pinctrl_pwm4>;
514 status = "okay";
515};
516
517&ssi1 {
518 status = "okay";
519};
520
521&uart1 {
522 pinctrl-names = "default";
523 pinctrl-0 = <&pinctrl_uart1>;
524 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
525 status = "okay";
526};
527
528&uart2 {
529 pinctrl-names = "default";
530 pinctrl-0 = <&pinctrl_uart2>;
531 status = "okay";
532};
533
534&uart5 {
535 pinctrl-names = "default";
536 pinctrl-0 = <&pinctrl_uart5>;
537 status = "okay";
538};
539
540&usbotg {
541 vbus-supply = <®_usb_otg_vbus>;
542 pinctrl-names = "default";
543 pinctrl-0 = <&pinctrl_usbotg>;
544 disable-over-current;
545 status = "okay";
546};
547
548&usbh1 {
549 status = "okay";
550};
551
552&usdhc3 {
553 pinctrl-names = "default", "state_100mhz", "state_200mhz";
554 pinctrl-0 = <&pinctrl_usdhc3>;
555 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
556 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
557 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
558 vmmc-supply = <®_3p3v>;
559 no-1-8-v; /* firmware will remove if board revision supports */
560 status = "okay";
561};
562
563&wdog1 {
564 pinctrl-names = "default";
565 pinctrl-0 = <&pinctrl_wdog>;
566 fsl,ext-reset-output;
567};
568
569&iomuxc {
570 pinctrl_audmux: audmuxgrp {
571 fsl,pins = <
572 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
573 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
574 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
575 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
576 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
577 >;
578 };
579
580 pinctrl_ecspi3: escpi3grp {
581 fsl,pins = <
582 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
583 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
584 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
585 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
586 >;
587 };
588
589 pinctrl_enet: enetgrp {
590 fsl,pins = <
591 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
592 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
593 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
594 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
595 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
596 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
597 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
598 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
599 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
600 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
601 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
602 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
603 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
604 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
605 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
606 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
607 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
608 >;
609 };
610
611 pinctrl_flexcan1: flexcan1grp {
612 fsl,pins = <
613 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
614 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
615 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
616 >;
617 };
618
619 pinctrl_gpio_leds: gpioledsgrp {
620 fsl,pins = <
621 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
622 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
623 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
624 >;
625 };
626
627 pinctrl_gpmi_nand: gpminandgrp {
628 fsl,pins = <
629 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
630 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
631 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
632 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
633 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
634 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
635 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
636 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
637 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
638 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
639 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
640 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
641 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
642 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
643 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
644 >;
645 };
646
647 pinctrl_i2c1: i2c1grp {
648 fsl,pins = <
649 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
650 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
651 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
652 >;
653 };
654
655 pinctrl_i2c2: i2c2grp {
656 fsl,pins = <
657 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
658 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
659 >;
660 };
661
662 pinctrl_i2c3: i2c3grp {
663 fsl,pins = <
664 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
665 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
666 >;
667 };
668
669 pinctrl_pcie: pciegrp {
670 fsl,pins = <
671 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
672 >;
673 };
674
675 pinctrl_pmic: pmicgrp {
676 fsl,pins = <
677 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
678 >;
679 };
680
681 pinctrl_pps: ppsgrp {
682 fsl,pins = <
683 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
684 >;
685 };
686
687 pinctrl_pwm2: pwm2grp {
688 fsl,pins = <
689 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
690 >;
691 };
692
693 pinctrl_pwm3: pwm3grp {
694 fsl,pins = <
695 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
696 >;
697 };
698
699 pinctrl_pwm4: pwm4grp {
700 fsl,pins = <
701 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
702 >;
703 };
704
705 pinctrl_uart1: uart1grp {
706 fsl,pins = <
707 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
708 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
709 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
710 >;
711 };
712
713 pinctrl_uart2: uart2grp {
714 fsl,pins = <
715 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
716 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
717 >;
718 };
719
720 pinctrl_uart5: uart5grp {
721 fsl,pins = <
722 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
723 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
724 >;
725 };
726
727 pinctrl_usbotg: usbotggrp {
728 fsl,pins = <
729 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
730 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
731 >;
732 };
733
734 pinctrl_usdhc3: usdhc3grp {
735 fsl,pins = <
736 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
737 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
738 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
739 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
740 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
741 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
742 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
743 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
744 >;
745 };
746
747 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
748 fsl,pins = <
749 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
750 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
751 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
752 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
753 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
754 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
755 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
756 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
757 >;
758 };
759
760 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
761 fsl,pins = <
762 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
763 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
764 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
765 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
766 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
767 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
768 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
769 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
770 >;
771 };
772
773 pinctrl_wdog: wdoggrp {
774 fsl,pins = <
775 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
776 >;
777 };
778};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8
9/ {
10 /* these are used by bootloader for disabling nodes */
11 aliases {
12 led0 = &led0;
13 led1 = &led1;
14 led2 = &led2;
15 nand = &gpmi;
16 ssi0 = &ssi1;
17 usb0 = &usbh1;
18 usb1 = &usbotg;
19 };
20
21 chosen {
22 bootargs = "console=ttymxc1,115200";
23 };
24
25 backlight {
26 compatible = "pwm-backlight";
27 pwms = <&pwm4 0 5000000>;
28 brightness-levels = <0 4 8 16 32 64 128 255>;
29 default-brightness-level = <7>;
30 };
31
32 gpio-keys {
33 compatible = "gpio-keys";
34 #address-cells = <1>;
35 #size-cells = <0>;
36
37 user-pb {
38 label = "user_pb";
39 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
40 linux,code = <BTN_0>;
41 };
42
43 user-pb1x {
44 label = "user_pb1x";
45 linux,code = <BTN_1>;
46 interrupt-parent = <&gsc>;
47 interrupts = <0>;
48 };
49
50 key-erased {
51 label = "key-erased";
52 linux,code = <BTN_2>;
53 interrupt-parent = <&gsc>;
54 interrupts = <1>;
55 };
56
57 eeprom-wp {
58 label = "eeprom_wp";
59 linux,code = <BTN_3>;
60 interrupt-parent = <&gsc>;
61 interrupts = <2>;
62 };
63
64 tamper {
65 label = "tamper";
66 linux,code = <BTN_4>;
67 interrupt-parent = <&gsc>;
68 interrupts = <5>;
69 };
70
71 switch-hold {
72 label = "switch_hold";
73 linux,code = <BTN_5>;
74 interrupt-parent = <&gsc>;
75 interrupts = <7>;
76 };
77 };
78
79 leds {
80 compatible = "gpio-leds";
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_gpio_leds>;
83
84 led0: user1 {
85 label = "user1";
86 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
87 default-state = "on";
88 linux,default-trigger = "heartbeat";
89 };
90
91 led1: user2 {
92 label = "user2";
93 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
94 default-state = "off";
95 };
96
97 led2: user3 {
98 label = "user3";
99 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
100 default-state = "off";
101 };
102 };
103
104 memory@10000000 {
105 device_type = "memory";
106 reg = <0x10000000 0x20000000>;
107 };
108
109 pps {
110 compatible = "pps-gpio";
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_pps>;
113 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
114 status = "okay";
115 };
116
117 reg_1p0v: regulator-1p0v {
118 compatible = "regulator-fixed";
119 regulator-name = "1P0V";
120 regulator-min-microvolt = <1000000>;
121 regulator-max-microvolt = <1000000>;
122 regulator-always-on;
123 };
124
125 reg_3p3v: regulator-3p3v {
126 compatible = "regulator-fixed";
127 regulator-name = "3P3V";
128 regulator-min-microvolt = <3300000>;
129 regulator-max-microvolt = <3300000>;
130 regulator-always-on;
131 };
132
133 reg_5p0v: regulator-5p0v {
134 compatible = "regulator-fixed";
135 regulator-name = "5P0V";
136 regulator-min-microvolt = <5000000>;
137 regulator-max-microvolt = <5000000>;
138 regulator-always-on;
139 };
140
141 reg_usb_otg_vbus: regulator-usb-otg-vbus {
142 compatible = "regulator-fixed";
143 regulator-name = "usb_otg_vbus";
144 regulator-min-microvolt = <5000000>;
145 regulator-max-microvolt = <5000000>;
146 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
147 enable-active-high;
148 };
149
150 sound {
151 compatible = "fsl,imx6q-ventana-sgtl5000",
152 "fsl,imx-audio-sgtl5000";
153 model = "sgtl5000-audio";
154 ssi-controller = <&ssi1>;
155 audio-codec = <&codec>;
156 audio-routing =
157 "MIC_IN", "Mic Jack",
158 "Mic Jack", "Mic Bias",
159 "Headphone Jack", "HP_OUT";
160 mux-int-port = <1>;
161 mux-ext-port = <4>;
162 };
163};
164
165&audmux {
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_audmux>;
168 status = "okay";
169};
170
171&can1 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_flexcan1>;
174 status = "okay";
175};
176
177&clks {
178 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
179 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
180 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
181 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
182};
183
184&ecspi3 {
185 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_ecspi3>;
188 status = "okay";
189};
190
191&fec {
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_enet>;
194 phy-mode = "rgmii-id";
195 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
196 status = "okay";
197};
198
199&gpmi {
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_gpmi_nand>;
202 status = "okay";
203};
204
205&hdmi {
206 ddc-i2c-bus = <&i2c3>;
207 status = "okay";
208};
209
210&i2c1 {
211 clock-frequency = <100000>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&pinctrl_i2c1>;
214 status = "okay";
215
216 gsc: gsc@20 {
217 compatible = "gw,gsc";
218 reg = <0x20>;
219 interrupt-parent = <&gpio1>;
220 interrupts = <4 GPIO_ACTIVE_LOW>;
221 interrupt-controller;
222 #interrupt-cells = <1>;
223 #size-cells = <0>;
224
225 adc {
226 compatible = "gw,gsc-adc";
227 #address-cells = <1>;
228 #size-cells = <0>;
229
230 channel@0 {
231 gw,mode = <0>;
232 reg = <0x00>;
233 label = "temp";
234 };
235
236 channel@2 {
237 gw,mode = <1>;
238 reg = <0x02>;
239 label = "vdd_vin";
240 };
241
242 channel@5 {
243 gw,mode = <1>;
244 reg = <0x05>;
245 label = "vdd_3p3";
246 };
247
248 channel@8 {
249 gw,mode = <1>;
250 reg = <0x08>;
251 label = "vdd_bat";
252 };
253
254 channel@b {
255 gw,mode = <1>;
256 reg = <0x0b>;
257 label = "vdd_5p0";
258 };
259
260 channel@e {
261 gw,mode = <1>;
262 reg = <0xe>;
263 label = "vdd_arm";
264 };
265
266 channel@11 {
267 gw,mode = <1>;
268 reg = <0x11>;
269 label = "vdd_soc";
270 };
271
272 channel@14 {
273 gw,mode = <1>;
274 reg = <0x14>;
275 label = "vdd_3p0";
276 };
277
278 channel@17 {
279 gw,mode = <1>;
280 reg = <0x17>;
281 label = "vdd_1p5";
282 };
283
284 channel@1d {
285 gw,mode = <1>;
286 reg = <0x1d>;
287 label = "vdd_1p8";
288 };
289
290 channel@20 {
291 gw,mode = <1>;
292 reg = <0x20>;
293 label = "vdd_1p0";
294 };
295
296 channel@23 {
297 gw,mode = <1>;
298 reg = <0x23>;
299 label = "vdd_2p5";
300 };
301
302 channel@29 {
303 gw,mode = <1>;
304 reg = <0x29>;
305 label = "vdd_an1";
306 };
307 };
308 };
309
310 gsc_gpio: gpio@23 {
311 compatible = "nxp,pca9555";
312 reg = <0x23>;
313 gpio-controller;
314 #gpio-cells = <2>;
315 interrupt-parent = <&gsc>;
316 interrupts = <4>;
317 };
318
319 eeprom1: eeprom@50 {
320 compatible = "atmel,24c02";
321 reg = <0x50>;
322 pagesize = <16>;
323 };
324
325 eeprom2: eeprom@51 {
326 compatible = "atmel,24c02";
327 reg = <0x51>;
328 pagesize = <16>;
329 };
330
331 eeprom3: eeprom@52 {
332 compatible = "atmel,24c02";
333 reg = <0x52>;
334 pagesize = <16>;
335 };
336
337 eeprom4: eeprom@53 {
338 compatible = "atmel,24c02";
339 reg = <0x53>;
340 pagesize = <16>;
341 };
342
343 rtc: ds1672@68 {
344 compatible = "dallas,ds1672";
345 reg = <0x68>;
346 };
347};
348
349&i2c2 {
350 clock-frequency = <100000>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_i2c2>;
353 status = "okay";
354
355 ltc3676: pmic@3c {
356 compatible = "lltc,ltc3676";
357 reg = <0x3c>;
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_pmic>;
360 interrupt-parent = <&gpio1>;
361 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
362
363 regulators {
364 /* VDD_SOC (1+R1/R2 = 1.635) */
365 reg_vdd_soc: sw1 {
366 regulator-name = "vddsoc";
367 regulator-min-microvolt = <674400>;
368 regulator-max-microvolt = <1308000>;
369 lltc,fb-voltage-divider = <127000 200000>;
370 regulator-ramp-delay = <7000>;
371 regulator-boot-on;
372 regulator-always-on;
373 };
374
375 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
376 reg_1p8v: sw2 {
377 regulator-name = "vdd1p8";
378 regulator-min-microvolt = <1033310>;
379 regulator-max-microvolt = <2004000>;
380 lltc,fb-voltage-divider = <301000 200000>;
381 regulator-ramp-delay = <7000>;
382 regulator-boot-on;
383 regulator-always-on;
384 };
385
386 /* VDD_ARM (1+R1/R2 = 1.635) */
387 reg_vdd_arm: sw3 {
388 regulator-name = "vddarm";
389 regulator-min-microvolt = <674400>;
390 regulator-max-microvolt = <1308000>;
391 lltc,fb-voltage-divider = <127000 200000>;
392 regulator-ramp-delay = <7000>;
393 regulator-boot-on;
394 regulator-always-on;
395 };
396
397 /* VDD_DDR (1+R1/R2 = 2.105) */
398 reg_vdd_ddr: sw4 {
399 regulator-name = "vddddr";
400 regulator-min-microvolt = <868310>;
401 regulator-max-microvolt = <1684000>;
402 lltc,fb-voltage-divider = <221000 200000>;
403 regulator-ramp-delay = <7000>;
404 regulator-boot-on;
405 regulator-always-on;
406 };
407
408 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
409 reg_2p5v: ldo2 {
410 regulator-name = "vdd2p5";
411 regulator-min-microvolt = <2490375>;
412 regulator-max-microvolt = <2490375>;
413 lltc,fb-voltage-divider = <487000 200000>;
414 regulator-boot-on;
415 regulator-always-on;
416 };
417
418 /* VDD_AUD_1P8: Audio codec */
419 reg_aud_1p8v: ldo3 {
420 regulator-name = "vdd1p8";
421 regulator-min-microvolt = <1800000>;
422 regulator-max-microvolt = <1800000>;
423 regulator-boot-on;
424 };
425
426 /* VDD_HIGH (1+R1/R2 = 4.17) */
427 reg_3p0v: ldo4 {
428 regulator-name = "vdd3p0";
429 regulator-min-microvolt = <3023250>;
430 regulator-max-microvolt = <3023250>;
431 lltc,fb-voltage-divider = <634000 200000>;
432 regulator-boot-on;
433 regulator-always-on;
434 };
435 };
436 };
437};
438
439&i2c3 {
440 clock-frequency = <100000>;
441 pinctrl-names = "default";
442 pinctrl-0 = <&pinctrl_i2c3>;
443 status = "okay";
444
445 codec: sgtl5000@a {
446 compatible = "fsl,sgtl5000";
447 reg = <0x0a>;
448 clocks = <&clks IMX6QDL_CLK_CKO>;
449 VDDA-supply = <®_1p8v>;
450 VDDIO-supply = <®_3p3v>;
451 };
452
453 touchscreen: egalax_ts@4 {
454 compatible = "eeti,egalax_ts";
455 reg = <0x04>;
456 interrupt-parent = <&gpio7>;
457 interrupts = <12 2>;
458 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
459 };
460
461 accel@1e {
462 compatible = "nxp,fxos8700";
463 reg = <0x1e>;
464 };
465};
466
467&ldb {
468 status = "okay";
469
470 lvds-channel@0 {
471 fsl,data-mapping = "spwg";
472 fsl,data-width = <18>;
473 status = "okay";
474
475 display-timings {
476 native-mode = <&timing0>;
477 timing0: hsd100pxn1 {
478 clock-frequency = <65000000>;
479 hactive = <1024>;
480 vactive = <768>;
481 hback-porch = <220>;
482 hfront-porch = <40>;
483 vback-porch = <21>;
484 vfront-porch = <7>;
485 hsync-len = <60>;
486 vsync-len = <10>;
487 };
488 };
489 };
490};
491
492&pcie {
493 pinctrl-names = "default";
494 pinctrl-0 = <&pinctrl_pcie>;
495 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
496 status = "okay";
497};
498
499&pwm2 {
500 pinctrl-names = "default";
501 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
502 status = "disabled";
503};
504
505&pwm3 {
506 pinctrl-names = "default";
507 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
508 status = "disabled";
509};
510
511&pwm4 {
512 #pwm-cells = <2>;
513 pinctrl-names = "default";
514 pinctrl-0 = <&pinctrl_pwm4>;
515 status = "okay";
516};
517
518&ssi1 {
519 status = "okay";
520};
521
522&uart1 {
523 pinctrl-names = "default";
524 pinctrl-0 = <&pinctrl_uart1>;
525 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
526 status = "okay";
527};
528
529&uart2 {
530 pinctrl-names = "default";
531 pinctrl-0 = <&pinctrl_uart2>;
532 status = "okay";
533};
534
535&uart5 {
536 pinctrl-names = "default";
537 pinctrl-0 = <&pinctrl_uart5>;
538 status = "okay";
539};
540
541&usbotg {
542 vbus-supply = <®_usb_otg_vbus>;
543 pinctrl-names = "default";
544 pinctrl-0 = <&pinctrl_usbotg>;
545 disable-over-current;
546 status = "okay";
547};
548
549&usbh1 {
550 status = "okay";
551};
552
553&usdhc3 {
554 pinctrl-names = "default", "state_100mhz", "state_200mhz";
555 pinctrl-0 = <&pinctrl_usdhc3>;
556 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
557 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
558 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
559 vmmc-supply = <®_3p3v>;
560 no-1-8-v; /* firmware will remove if board revision supports */
561 status = "okay";
562};
563
564&wdog1 {
565 pinctrl-names = "default";
566 pinctrl-0 = <&pinctrl_wdog>;
567 fsl,ext-reset-output;
568};
569
570&iomuxc {
571 pinctrl_audmux: audmuxgrp {
572 fsl,pins = <
573 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
574 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
575 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
576 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
577 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
578 >;
579 };
580
581 pinctrl_ecspi3: escpi3grp {
582 fsl,pins = <
583 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
584 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
585 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
586 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
587 >;
588 };
589
590 pinctrl_enet: enetgrp {
591 fsl,pins = <
592 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
593 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
594 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
595 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
596 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
597 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
598 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
599 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
600 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
601 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
602 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
603 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
604 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
605 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
606 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
607 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
608 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
609 >;
610 };
611
612 pinctrl_flexcan1: flexcan1grp {
613 fsl,pins = <
614 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
615 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
616 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
617 >;
618 };
619
620 pinctrl_gpio_leds: gpioledsgrp {
621 fsl,pins = <
622 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
623 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
624 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
625 >;
626 };
627
628 pinctrl_gpmi_nand: gpminandgrp {
629 fsl,pins = <
630 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
631 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
632 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
633 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
634 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
635 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
636 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
637 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
638 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
639 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
640 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
641 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
642 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
643 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
644 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
645 >;
646 };
647
648 pinctrl_i2c1: i2c1grp {
649 fsl,pins = <
650 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
651 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
652 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
653 >;
654 };
655
656 pinctrl_i2c2: i2c2grp {
657 fsl,pins = <
658 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
659 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
660 >;
661 };
662
663 pinctrl_i2c3: i2c3grp {
664 fsl,pins = <
665 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
666 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
667 >;
668 };
669
670 pinctrl_pcie: pciegrp {
671 fsl,pins = <
672 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
673 >;
674 };
675
676 pinctrl_pmic: pmicgrp {
677 fsl,pins = <
678 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
679 >;
680 };
681
682 pinctrl_pps: ppsgrp {
683 fsl,pins = <
684 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
685 >;
686 };
687
688 pinctrl_pwm2: pwm2grp {
689 fsl,pins = <
690 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
691 >;
692 };
693
694 pinctrl_pwm3: pwm3grp {
695 fsl,pins = <
696 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
697 >;
698 };
699
700 pinctrl_pwm4: pwm4grp {
701 fsl,pins = <
702 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
703 >;
704 };
705
706 pinctrl_uart1: uart1grp {
707 fsl,pins = <
708 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
709 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
710 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
711 >;
712 };
713
714 pinctrl_uart2: uart2grp {
715 fsl,pins = <
716 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
717 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
718 >;
719 };
720
721 pinctrl_uart5: uart5grp {
722 fsl,pins = <
723 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
724 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
725 >;
726 };
727
728 pinctrl_usbotg: usbotggrp {
729 fsl,pins = <
730 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
731 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
732 >;
733 };
734
735 pinctrl_usdhc3: usdhc3grp {
736 fsl,pins = <
737 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
738 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
739 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
740 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
741 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
742 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
743 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
744 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
745 >;
746 };
747
748 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
749 fsl,pins = <
750 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
751 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
752 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
753 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
754 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
755 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
756 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
757 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
758 >;
759 };
760
761 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
762 fsl,pins = <
763 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
764 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
765 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
766 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
767 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
768 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
769 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
770 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
771 >;
772 };
773
774 pinctrl_wdog: wdoggrp {
775 fsl,pins = <
776 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
777 >;
778 };
779};