Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
4 *
5 * Copyright (C) 2012 Atmel,
6 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
7 */
8#include "at91sam9x5cm.dtsi"
9
10/ {
11 model = "Atmel AT91SAM9X5-EK";
12 compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
13
14 chosen {
15 bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
16 stdout-path = "serial0:115200n8";
17 };
18
19 sound {
20 compatible = "atmel,sam9x5-wm8731-audio";
21
22 atmel,model = "wm8731 @ AT91SAM9X5EK";
23
24 atmel,audio-routing =
25 "Headphone Jack", "RHPOUT",
26 "Headphone Jack", "LHPOUT",
27 "LLINEIN", "Line In Jack",
28 "RLINEIN", "Line In Jack";
29
30 atmel,ssc-controller = <&ssc0>;
31 atmel,audio-codec = <&wm8731>;
32 };
33};
34
35&adc0 {
36 atmel,adc-ts-wires = <4>;
37 atmel,adc-ts-pressure-threshold = <10000>;
38 status = "okay";
39};
40
41&dbgu {
42 status = "okay";
43};
44
45&i2c0 {
46 status = "okay";
47
48 wm8731: wm8731@1a {
49 compatible = "wm8731";
50 reg = <0x1a>;
51 };
52};
53
54&mmc0 {
55 pinctrl-0 = <
56 &pinctrl_board_mmc0
57 &pinctrl_mmc0_slot0_clk_cmd_dat0
58 &pinctrl_mmc0_slot0_dat1_3>;
59 pinctrl-names = "default";
60 status = "okay";
61
62 slot@0 {
63 reg = <0>;
64 bus-width = <4>;
65 cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
66 };
67};
68
69&mmc1 {
70 pinctrl-0 = <
71 &pinctrl_board_mmc1
72 &pinctrl_mmc1_slot0_clk_cmd_dat0
73 &pinctrl_mmc1_slot0_dat1_3>;
74 pinctrl-names = "default";
75 status = "okay";
76
77 slot@0 {
78 reg = <0>;
79 bus-width = <4>;
80 cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
81 };
82};
83
84&pinctrl {
85 camera_sensor {
86 pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
87 atmel,pins =
88 <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
89 };
90
91 pinctrl_sensor_power: sensor_power-0 {
92 atmel,pins =
93 <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
94 };
95
96 pinctrl_sensor_reset: sensor_reset-0 {
97 atmel,pins =
98 <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
99 };
100 };
101
102 mmc0 {
103 pinctrl_board_mmc0: mmc0-board {
104 atmel,pins =
105 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
106 };
107 };
108
109 mmc1 {
110 pinctrl_board_mmc1: mmc1-board {
111 atmel,pins =
112 <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
113 };
114 };
115
116 usb2 {
117 pinctrl_board_usb2: usb2-board {
118 atmel,pins =
119 <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
120 };
121 };
122};
123
124&spi0 {
125 cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
126 status = "disabled"; /* conflicts with mmc1 */
127
128 m25p80@0 {
129 compatible = "atmel,at25df321a";
130 spi-max-frequency = <50000000>;
131 reg = <0>;
132 };
133};
134
135&ssc0 {
136 status = "okay";
137};
138
139&usart0 {
140 atmel,use-dma-rx;
141 atmel,use-dma-tx;
142 status = "okay";
143};
144
145&usb0 {
146 num-ports = <3>;
147 atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
148 &pioD 19 GPIO_ACTIVE_LOW
149 &pioD 20 GPIO_ACTIVE_LOW
150 >;
151 status = "okay";
152};
153
154&usb1 {
155 status = "okay";
156};
157
158&usb2 {
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_board_usb2>;
161 atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
162 status = "okay";
163};
164
165&watchdog {
166 status = "okay";
167};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
4 *
5 * Copyright (C) 2012 Atmel,
6 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
7 */
8#include "at91sam9x5cm.dtsi"
9
10/ {
11 model = "Atmel AT91SAM9X5-EK";
12 compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
13
14 chosen {
15 bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
16 stdout-path = "serial0:115200n8";
17 };
18
19 sound {
20 compatible = "atmel,sam9x5-wm8731-audio";
21
22 atmel,model = "wm8731 @ AT91SAM9X5EK";
23
24 atmel,audio-routing =
25 "Headphone Jack", "RHPOUT",
26 "Headphone Jack", "LHPOUT",
27 "LLINEIN", "Line In Jack",
28 "RLINEIN", "Line In Jack";
29
30 atmel,ssc-controller = <&ssc0>;
31 atmel,audio-codec = <&wm8731>;
32 };
33};
34
35&adc0 {
36 atmel,adc-ts-wires = <4>;
37 atmel,adc-ts-pressure-threshold = <10000>;
38 status = "okay";
39};
40
41&dbgu {
42 status = "okay";
43};
44
45&i2c0 {
46 status = "okay";
47
48 wm8731: wm8731@1a {
49 compatible = "wm8731";
50 reg = <0x1a>;
51 };
52};
53
54&mmc0 {
55 pinctrl-0 = <
56 &pinctrl_board_mmc0
57 &pinctrl_mmc0_slot0_clk_cmd_dat0
58 &pinctrl_mmc0_slot0_dat1_3>;
59 status = "okay";
60
61 slot@0 {
62 reg = <0>;
63 bus-width = <4>;
64 cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
65 };
66};
67
68&mmc1 {
69 pinctrl-0 = <
70 &pinctrl_board_mmc1
71 &pinctrl_mmc1_slot0_clk_cmd_dat0
72 &pinctrl_mmc1_slot0_dat1_3>;
73 status = "okay";
74
75 slot@0 {
76 reg = <0>;
77 bus-width = <4>;
78 cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
79 };
80};
81
82&pinctrl {
83 camera_sensor {
84 pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
85 atmel,pins =
86 <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
87 };
88
89 pinctrl_sensor_power: sensor_power-0 {
90 atmel,pins =
91 <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
92 };
93
94 pinctrl_sensor_reset: sensor_reset-0 {
95 atmel,pins =
96 <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
97 };
98 };
99
100 mmc0 {
101 pinctrl_board_mmc0: mmc0-board {
102 atmel,pins =
103 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
104 };
105 };
106
107 mmc1 {
108 pinctrl_board_mmc1: mmc1-board {
109 atmel,pins =
110 <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
111 };
112 };
113
114 usb2 {
115 pinctrl_board_usb2: usb2-board {
116 atmel,pins =
117 <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
118 };
119 };
120};
121
122&spi0 {
123 cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
124 status = "disabled"; /* conflicts with mmc1 */
125
126 m25p80@0 {
127 compatible = "atmel,at25df321a";
128 spi-max-frequency = <50000000>;
129 reg = <0>;
130 };
131};
132
133&ssc0 {
134 status = "okay";
135};
136
137&usart0 {
138 atmel,use-dma-rx;
139 atmel,use-dma-tx;
140 status = "okay";
141};
142
143&usb0 {
144 num-ports = <3>;
145 atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
146 &pioD 19 GPIO_ACTIVE_LOW
147 &pioD 20 GPIO_ACTIVE_LOW
148 >;
149 status = "okay";
150};
151
152&usb1 {
153 status = "okay";
154};
155
156&usb2 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_board_usb2>;
159 atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
160 status = "okay";
161};
162
163&watchdog {
164 status = "okay";
165};