Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3288.dtsi"
10
11/ {
12 model = "Netxeon R89";
13 compatible = "netxeon,r89", "rockchip,rk3288";
14
15 memory@0 {
16 device_type = "memory";
17 reg = <0x0 0x0 0x0 0x80000000>;
18 };
19
20 ext_gmac: external-gmac-clock {
21 compatible = "fixed-clock";
22 clock-frequency = <125000000>;
23 clock-output-names = "ext_gmac";
24 #clock-cells = <0>;
25 };
26
27 gpio-keys {
28 compatible = "gpio-keys";
29 autorepeat;
30
31 pinctrl-names = "default";
32 pinctrl-0 = <&pwrbtn>;
33
34 power {
35 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_POWER>;
37 label = "GPIO Key Power";
38 linux,input-type = <1>;
39 wakeup-source;
40 debounce-interval = <100>;
41 };
42 };
43
44 ir: ir-receiver {
45 compatible = "gpio-ir-receiver";
46 gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
47 pinctrl-names = "default";
48 pinctrl-0 = <&ir_int>;
49 };
50
51 vcc_host: vcc-host-regulator {
52 compatible = "regulator-fixed";
53 enable-active-high;
54 gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
55 pinctrl-names = "default";
56 pinctrl-0 = <&host_vbus_drv>;
57 regulator-name = "vcc_host";
58 regulator-always-on;
59 regulator-boot-on;
60 };
61
62 vcc_otg: vcc-otg-regulator {
63 compatible = "regulator-fixed";
64 enable-active-high;
65 gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
66 pinctrl-names = "default";
67 pinctrl-0 = <&otg_vbus_drv>;
68 regulator-name = "vcc_otg";
69 regulator-always-on;
70 regulator-boot-on;
71 };
72
73 vcc_sdmmc: sdmmc-regulator {
74 compatible = "regulator-fixed";
75 regulator-name = "sdmmc-supply";
76 regulator-min-microvolt = <3300000>;
77 regulator-max-microvolt = <3300000>;
78 gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
79 startup-delay-us = <100000>;
80 vin-supply = <&vcc_io>;
81 };
82
83 vcc_sys: sys-regulator {
84 compatible = "regulator-fixed";
85 regulator-name = "sys-supply";
86 regulator-min-microvolt = <5000000>;
87 regulator-max-microvolt = <5000000>;
88 regulator-always-on;
89 regulator-boot-on;
90 };
91};
92
93&cpu0 {
94 cpu-supply = <&vdd_cpu>;
95};
96
97&cpu1 {
98 cpu-supply = <&vdd_cpu>;
99};
100
101&cpu2 {
102 cpu-supply = <&vdd_cpu>;
103};
104
105&cpu3 {
106 cpu-supply = <&vdd_cpu>;
107};
108
109&gmac {
110 phy-supply = <&vcc_lan>;
111 phy-mode = "rgmii";
112 clock_in_out = "input";
113 snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
114 snps,reset-active-low;
115 snps,reset-delays-us = <0 10000 1000000>;
116 assigned-clocks = <&cru SCLK_MAC>;
117 assigned-clock-parents = <&ext_gmac>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&rgmii_pins>;
120 tx_delay = <0x30>;
121 rx_delay = <0x10>;
122 status = "okay";
123};
124
125&hdmi {
126 status = "okay";
127};
128
129&i2c0 {
130 status = "okay";
131
132 vdd_cpu: pmic@40 {
133 compatible = "silergy,syr827";
134 reg = <0x40>;
135 fcs,suspend-voltage-selector = <1>;
136 regulator-name = "VDD_CPU";
137 regulator-enable-ramp-delay = <300>;
138 regulator-min-microvolt = <850000>;
139 regulator-max-microvolt = <1350000>;
140 regulator-ramp-delay = <8000>;
141 regulator-always-on;
142 regulator-boot-on;
143 vin-supply = <&vcc_sys>;
144 };
145
146 vdd_gpu: pmic@41 {
147 compatible = "silergy,syr828";
148 reg = <0x41>;
149 fcs,suspend-voltage-selector = <1>;
150 regulator-name = "VDD_GPU";
151 regulator-enable-ramp-delay = <300>;
152 regulator-min-microvolt = <850000>;
153 regulator-max-microvolt = <1350000>;
154 regulator-ramp-delay = <8000>;
155 regulator-always-on;
156 regulator-boot-on;
157 vin-supply = <&vcc_sys>;
158 };
159
160 rtc@51 {
161 compatible = "haoyu,hym8563";
162 reg = <0x51>;
163 #clock-cells = <0>;
164 clock-output-names = "xin32k";
165 interrupt-parent = <&gpio0>;
166 interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
167 pinctrl-names = "default";
168 pinctrl-0 = <&pmic_int>;
169 };
170
171 act8846: pmic@5a {
172 compatible = "active-semi,act8846";
173 reg = <0x5a>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
176 system-power-controller;
177
178 regulators {
179 vcc_ddr: REG1 {
180 regulator-name = "VCC_DDR";
181 regulator-min-microvolt = <1200000>;
182 regulator-max-microvolt = <1200000>;
183 regulator-always-on;
184 };
185
186 vcc_io: REG2 {
187 regulator-name = "VCC_IO";
188 regulator-min-microvolt = <3300000>;
189 regulator-max-microvolt = <3300000>;
190 regulator-always-on;
191 };
192
193 vdd_log: REG3 {
194 regulator-name = "VDD_LOG";
195 regulator-min-microvolt = <1000000>;
196 regulator-max-microvolt = <1000000>;
197 regulator-always-on;
198 };
199
200 vcc_20: REG4 {
201 regulator-name = "VCC_20";
202 regulator-min-microvolt = <2000000>;
203 regulator-max-microvolt = <2000000>;
204 regulator-always-on;
205 };
206
207 vccio_sd: REG5 {
208 regulator-name = "VCCIO_SD";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 regulator-always-on;
212 };
213
214 vdd10_lcd: REG6 {
215 regulator-name = "VDD10_LCD";
216 regulator-min-microvolt = <1000000>;
217 regulator-max-microvolt = <1000000>;
218 regulator-always-on;
219 };
220
221 vcc_wl: REG7 {
222 regulator-name = "VCC_WL";
223 regulator-min-microvolt = <3300000>;
224 regulator-max-microvolt = <3300000>;
225 regulator-always-on;
226 };
227
228 vcca_33: REG8 {
229 regulator-name = "VCCA_33";
230 regulator-min-microvolt = <3300000>;
231 regulator-max-microvolt = <3300000>;
232 regulator-always-on;
233 };
234
235 vcc_lan: REG9 {
236 regulator-name = "VCC_LAN";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
239 regulator-always-on;
240 };
241
242 vdd_10: REG10 {
243 regulator-name = "VDD_10";
244 regulator-min-microvolt = <1000000>;
245 regulator-max-microvolt = <1000000>;
246 regulator-always-on;
247 };
248
249 vcc_18: REG11 {
250 regulator-name = "VCC_18";
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
253 regulator-always-on;
254 };
255
256 vcc18_lcd: REG12 {
257 regulator-name = "VCC18_LCD";
258 regulator-min-microvolt = <1800000>;
259 regulator-max-microvolt = <1800000>;
260 regulator-always-on;
261 };
262 };
263 };
264};
265
266&i2c5 {
267 status = "okay";
268};
269
270&pinctrl {
271 pcfg_output_high: pcfg-output-high {
272 output-high;
273 };
274
275 pcfg_output_low: pcfg-output-low {
276 output-low;
277 };
278
279 act8846 {
280 pmic_vsel: pmic-vsel {
281 rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
282 };
283
284 pwr_hold: pwr-hold {
285 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>;
286 };
287 };
288
289 buttons {
290 pwrbtn: pwrbtn {
291 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
292 };
293 };
294
295 ir {
296 ir_int: ir-int {
297 rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
298 };
299 };
300
301 pmic {
302 pmic_int: pmic-int {
303 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
304 };
305 };
306
307 usb {
308 host_vbus_drv: host-vbus-drv {
309 rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
310 };
311
312 otg_vbus_drv: otg-vbus-drv {
313 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
314 };
315 };
316};
317
318&pwm0 {
319 status = "okay";
320};
321
322&saradc {
323 vref-supply = <&vcc_18>;
324 status = "okay";
325};
326
327&sdmmc {
328 bus-width = <4>;
329 cap-mmc-highspeed;
330 cap-sd-highspeed;
331 card-detect-delay = <200>;
332 disable-wp;
333 pinctrl-names = "default";
334 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
335 vmmc-supply = <&vcc_sdmmc>;
336 vqmmc-supply = <&vccio_sd>;
337 status = "okay";
338};
339
340&tsadc {
341 rockchip,hw-tshut-mode = <0>;
342 rockchip,hw-tshut-polarity = <0>;
343 status = "okay";
344};
345
346&uart0 {
347 status = "okay";
348};
349
350&uart1 {
351 status = "okay";
352};
353
354&uart2 {
355 status = "okay";
356};
357
358&uart3 {
359 status = "okay";
360};
361
362&uart4 {
363 status = "okay";
364};
365
366&usb_host0_ehci {
367 status = "okay";
368};
369
370&usb_host1 {
371 status = "okay";
372};
373
374&usb_otg {
375 status = "okay";
376};
377
378&usbphy {
379 status = "okay";
380};
381
382&vopb {
383 status = "okay";
384};
385
386&vopb_mmu {
387 status = "okay";
388};
389
390&vopl {
391 status = "okay";
392};
393
394&vopl_mmu {
395 status = "okay";
396};
397
398&wdt {
399 status = "okay";
400};
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3288.dtsi"
10
11/ {
12 compatible = "netxeon,r89", "rockchip,rk3288";
13
14 memory@0 {
15 device_type = "memory";
16 reg = <0x0 0x0 0x0 0x80000000>;
17 };
18
19 ext_gmac: external-gmac-clock {
20 compatible = "fixed-clock";
21 clock-frequency = <125000000>;
22 clock-output-names = "ext_gmac";
23 #clock-cells = <0>;
24 };
25
26 gpio-keys {
27 compatible = "gpio-keys";
28 autorepeat;
29
30 pinctrl-names = "default";
31 pinctrl-0 = <&pwrbtn>;
32
33 power {
34 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_POWER>;
36 label = "GPIO Key Power";
37 linux,input-type = <1>;
38 wakeup-source;
39 debounce-interval = <100>;
40 };
41 };
42
43 ir: ir-receiver {
44 compatible = "gpio-ir-receiver";
45 gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
46 pinctrl-names = "default";
47 pinctrl-0 = <&ir_int>;
48 };
49
50 vcc_host: vcc-host-regulator {
51 compatible = "regulator-fixed";
52 enable-active-high;
53 gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
54 pinctrl-names = "default";
55 pinctrl-0 = <&host_vbus_drv>;
56 regulator-name = "vcc_host";
57 regulator-always-on;
58 regulator-boot-on;
59 };
60
61 vcc_otg: vcc-otg-regulator {
62 compatible = "regulator-fixed";
63 enable-active-high;
64 gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
65 pinctrl-names = "default";
66 pinctrl-0 = <&otg_vbus_drv>;
67 regulator-name = "vcc_otg";
68 regulator-always-on;
69 regulator-boot-on;
70 };
71
72 vcc_sdmmc: sdmmc-regulator {
73 compatible = "regulator-fixed";
74 regulator-name = "sdmmc-supply";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
77 gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
78 startup-delay-us = <100000>;
79 vin-supply = <&vcc_io>;
80 };
81
82 vcc_sys: sys-regulator {
83 compatible = "regulator-fixed";
84 regulator-name = "sys-supply";
85 regulator-min-microvolt = <5000000>;
86 regulator-max-microvolt = <5000000>;
87 regulator-always-on;
88 regulator-boot-on;
89 };
90};
91
92&cpu0 {
93 cpu0-supply = <&vdd_cpu>;
94};
95
96&gmac {
97 phy-supply = <&vcc_lan>;
98 phy-mode = "rgmii";
99 clock_in_out = "input";
100 snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
101 snps,reset-active-low;
102 snps,reset-delays-us = <0 10000 1000000>;
103 assigned-clocks = <&cru SCLK_MAC>;
104 assigned-clock-parents = <&ext_gmac>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&rgmii_pins>;
107 tx_delay = <0x30>;
108 rx_delay = <0x10>;
109 status = "ok";
110};
111
112&hdmi {
113 status = "okay";
114};
115
116&i2c0 {
117 status = "okay";
118
119 vdd_cpu: pmic@40 {
120 compatible = "silergy,syr827";
121 reg = <0x40>;
122 fcs,suspend-voltage-selector = <1>;
123 regulator-name = "VDD_CPU";
124 regulator-enable-ramp-delay = <300>;
125 regulator-min-microvolt = <850000>;
126 regulator-max-microvolt = <1350000>;
127 regulator-ramp-delay = <8000>;
128 regulator-always-on;
129 regulator-boot-on;
130 vin-supply = <&vcc_sys>;
131 };
132
133 vdd_gpu: pmic@41 {
134 compatible = "silergy,syr828";
135 reg = <0x41>;
136 fcs,suspend-voltage-selector = <1>;
137 regulator-name = "VDD_GPU";
138 regulator-enable-ramp-delay = <300>;
139 regulator-min-microvolt = <850000>;
140 regulator-max-microvolt = <1350000>;
141 regulator-ramp-delay = <8000>;
142 regulator-always-on;
143 regulator-boot-on;
144 vin-supply = <&vcc_sys>;
145 };
146
147 rtc@51 {
148 compatible = "haoyu,hym8563";
149 reg = <0x51>;
150 #clock-cells = <0>;
151 clock-output-names = "xin32k";
152 interrupt-parent = <&gpio0>;
153 interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&pmic_int>;
156 };
157
158 act8846: pmic@5a {
159 compatible = "active-semi,act8846";
160 reg = <0x5a>;
161 pinctrl-names = "default";
162 pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
163 system-power-controller;
164
165 regulators {
166 vcc_ddr: REG1 {
167 regulator-name = "VCC_DDR";
168 regulator-min-microvolt = <1200000>;
169 regulator-max-microvolt = <1200000>;
170 regulator-always-on;
171 };
172
173 vcc_io: REG2 {
174 regulator-name = "VCC_IO";
175 regulator-min-microvolt = <3300000>;
176 regulator-max-microvolt = <3300000>;
177 regulator-always-on;
178 };
179
180 vdd_log: REG3 {
181 regulator-name = "VDD_LOG";
182 regulator-min-microvolt = <1000000>;
183 regulator-max-microvolt = <1000000>;
184 regulator-always-on;
185 };
186
187 vcc_20: REG4 {
188 regulator-name = "VCC_20";
189 regulator-min-microvolt = <2000000>;
190 regulator-max-microvolt = <2000000>;
191 regulator-always-on;
192 };
193
194 vccio_sd: REG5 {
195 regulator-name = "VCCIO_SD";
196 regulator-min-microvolt = <3300000>;
197 regulator-max-microvolt = <3300000>;
198 regulator-always-on;
199 };
200
201 vdd10_lcd: REG6 {
202 regulator-name = "VDD10_LCD";
203 regulator-min-microvolt = <1000000>;
204 regulator-max-microvolt = <1000000>;
205 regulator-always-on;
206 };
207
208 vcc_wl: REG7 {
209 regulator-name = "VCC_WL";
210 regulator-min-microvolt = <3300000>;
211 regulator-max-microvolt = <3300000>;
212 regulator-always-on;
213 };
214
215 vcca_33: REG8 {
216 regulator-name = "VCCA_33";
217 regulator-min-microvolt = <3300000>;
218 regulator-max-microvolt = <3300000>;
219 regulator-always-on;
220 };
221
222 vcc_lan: REG9 {
223 regulator-name = "VCC_LAN";
224 regulator-min-microvolt = <3300000>;
225 regulator-max-microvolt = <3300000>;
226 regulator-always-on;
227 };
228
229 vdd_10: REG10 {
230 regulator-name = "VDD_10";
231 regulator-min-microvolt = <1000000>;
232 regulator-max-microvolt = <1000000>;
233 regulator-always-on;
234 };
235
236 vcc_18: REG11 {
237 regulator-name = "VCC_18";
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <1800000>;
240 regulator-always-on;
241 };
242
243 vcc18_lcd: REG12 {
244 regulator-name = "VCC18_LCD";
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
247 regulator-always-on;
248 };
249 };
250 };
251};
252
253&i2c5 {
254 status = "okay";
255};
256
257&pinctrl {
258 pcfg_output_high: pcfg-output-high {
259 output-high;
260 };
261
262 pcfg_output_low: pcfg-output-low {
263 output-low;
264 };
265
266 act8846 {
267 pmic_vsel: pmic-vsel {
268 rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
269 };
270
271 pwr_hold: pwr-hold {
272 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>;
273 };
274 };
275
276 buttons {
277 pwrbtn: pwrbtn {
278 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
279 };
280 };
281
282 ir {
283 ir_int: ir-int {
284 rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
285 };
286 };
287
288 pmic {
289 pmic_int: pmic-int {
290 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
291 };
292 };
293
294 usb {
295 host_vbus_drv: host-vbus-drv {
296 rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
297 };
298
299 otg_vbus_drv: otg-vbus-drv {
300 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
301 };
302 };
303};
304
305&pwm0 {
306 status = "okay";
307};
308
309&saradc {
310 vref-supply = <&vcc_18>;
311 status = "okay";
312};
313
314&sdmmc {
315 bus-width = <4>;
316 cap-mmc-highspeed;
317 cap-sd-highspeed;
318 card-detect-delay = <200>;
319 disable-wp;
320 pinctrl-names = "default";
321 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
322 vmmc-supply = <&vcc_sdmmc>;
323 vqmmc-supply = <&vccio_sd>;
324 status = "okay";
325};
326
327&tsadc {
328 rockchip,hw-tshut-mode = <0>;
329 rockchip,hw-tshut-polarity = <0>;
330 status = "okay";
331};
332
333&uart0 {
334 status = "okay";
335};
336
337&uart1 {
338 status = "okay";
339};
340
341&uart2 {
342 status = "okay";
343};
344
345&uart3 {
346 status = "okay";
347};
348
349&uart4 {
350 status = "okay";
351};
352
353&usb_host0_ehci {
354 status = "okay";
355};
356
357&usb_host1 {
358 status = "okay";
359};
360
361&usb_otg {
362 status = "okay";
363};
364
365&usbphy {
366 status = "okay";
367};
368
369&vopb {
370 status = "okay";
371};
372
373&vopb_mmu {
374 status = "okay";
375};
376
377&vopl {
378 status = "okay";
379};
380
381&vopl_mmu {
382 status = "okay";
383};
384
385&wdt {
386 status = "okay";
387};