Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interconnect/qcom,msm8974.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/clock/qcom,gcc-msm8974.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/reset/qcom,gcc-msm8974.h>
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13 #address-cells = <1>;
14 #size-cells = <1>;
15 model = "Qualcomm MSM8974";
16 compatible = "qcom,msm8974";
17 interrupt-parent = <&intc>;
18
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
22 ranges;
23
24 mpss_region: mpss@8000000 {
25 reg = <0x08000000 0x5100000>;
26 no-map;
27 };
28
29 mba_region: mba@d100000 {
30 reg = <0x0d100000 0x100000>;
31 no-map;
32 };
33
34 wcnss_region: wcnss@d200000 {
35 reg = <0x0d200000 0xa00000>;
36 no-map;
37 };
38
39 adsp_region: adsp@dc00000 {
40 reg = <0x0dc00000 0x1900000>;
41 no-map;
42 };
43
44 venus@f500000 {
45 reg = <0x0f500000 0x500000>;
46 no-map;
47 };
48
49 smem_region: smem@fa00000 {
50 reg = <0xfa00000 0x200000>;
51 no-map;
52 };
53
54 tz@fc00000 {
55 reg = <0x0fc00000 0x160000>;
56 no-map;
57 };
58
59 rfsa@fd60000 {
60 reg = <0x0fd60000 0x20000>;
61 no-map;
62 };
63
64 rmtfs@fd80000 {
65 compatible = "qcom,rmtfs-mem";
66 reg = <0x0fd80000 0x180000>;
67 no-map;
68
69 qcom,client-id = <1>;
70 };
71 };
72
73 cpus {
74 #address-cells = <1>;
75 #size-cells = <0>;
76 interrupts = <GIC_PPI 9 0xf04>;
77
78 CPU0: cpu@0 {
79 compatible = "qcom,krait";
80 enable-method = "qcom,kpss-acc-v2";
81 device_type = "cpu";
82 reg = <0>;
83 next-level-cache = <&L2>;
84 qcom,acc = <&acc0>;
85 qcom,saw = <&saw0>;
86 cpu-idle-states = <&CPU_SPC>;
87 };
88
89 CPU1: cpu@1 {
90 compatible = "qcom,krait";
91 enable-method = "qcom,kpss-acc-v2";
92 device_type = "cpu";
93 reg = <1>;
94 next-level-cache = <&L2>;
95 qcom,acc = <&acc1>;
96 qcom,saw = <&saw1>;
97 cpu-idle-states = <&CPU_SPC>;
98 };
99
100 CPU2: cpu@2 {
101 compatible = "qcom,krait";
102 enable-method = "qcom,kpss-acc-v2";
103 device_type = "cpu";
104 reg = <2>;
105 next-level-cache = <&L2>;
106 qcom,acc = <&acc2>;
107 qcom,saw = <&saw2>;
108 cpu-idle-states = <&CPU_SPC>;
109 };
110
111 CPU3: cpu@3 {
112 compatible = "qcom,krait";
113 enable-method = "qcom,kpss-acc-v2";
114 device_type = "cpu";
115 reg = <3>;
116 next-level-cache = <&L2>;
117 qcom,acc = <&acc3>;
118 qcom,saw = <&saw3>;
119 cpu-idle-states = <&CPU_SPC>;
120 };
121
122 L2: l2-cache {
123 compatible = "cache";
124 cache-level = <2>;
125 qcom,saw = <&saw_l2>;
126 };
127
128 idle-states {
129 CPU_SPC: spc {
130 compatible = "qcom,idle-state-spc",
131 "arm,idle-state";
132 entry-latency-us = <150>;
133 exit-latency-us = <200>;
134 min-residency-us = <2000>;
135 };
136 };
137 };
138
139 memory {
140 device_type = "memory";
141 reg = <0x0 0x0>;
142 };
143
144 thermal-zones {
145 cpu-thermal0 {
146 polling-delay-passive = <250>;
147 polling-delay = <1000>;
148
149 thermal-sensors = <&tsens 5>;
150
151 trips {
152 cpu_alert0: trip0 {
153 temperature = <75000>;
154 hysteresis = <2000>;
155 type = "passive";
156 };
157 cpu_crit0: trip1 {
158 temperature = <110000>;
159 hysteresis = <2000>;
160 type = "critical";
161 };
162 };
163 };
164
165 cpu-thermal1 {
166 polling-delay-passive = <250>;
167 polling-delay = <1000>;
168
169 thermal-sensors = <&tsens 6>;
170
171 trips {
172 cpu_alert1: trip0 {
173 temperature = <75000>;
174 hysteresis = <2000>;
175 type = "passive";
176 };
177 cpu_crit1: trip1 {
178 temperature = <110000>;
179 hysteresis = <2000>;
180 type = "critical";
181 };
182 };
183 };
184
185 cpu-thermal2 {
186 polling-delay-passive = <250>;
187 polling-delay = <1000>;
188
189 thermal-sensors = <&tsens 7>;
190
191 trips {
192 cpu_alert2: trip0 {
193 temperature = <75000>;
194 hysteresis = <2000>;
195 type = "passive";
196 };
197 cpu_crit2: trip1 {
198 temperature = <110000>;
199 hysteresis = <2000>;
200 type = "critical";
201 };
202 };
203 };
204
205 cpu-thermal3 {
206 polling-delay-passive = <250>;
207 polling-delay = <1000>;
208
209 thermal-sensors = <&tsens 8>;
210
211 trips {
212 cpu_alert3: trip0 {
213 temperature = <75000>;
214 hysteresis = <2000>;
215 type = "passive";
216 };
217 cpu_crit3: trip1 {
218 temperature = <110000>;
219 hysteresis = <2000>;
220 type = "critical";
221 };
222 };
223 };
224
225 q6-dsp-thermal {
226 polling-delay-passive = <250>;
227 polling-delay = <1000>;
228
229 thermal-sensors = <&tsens 1>;
230
231 trips {
232 q6_dsp_alert0: trip-point0 {
233 temperature = <90000>;
234 hysteresis = <2000>;
235 type = "hot";
236 };
237 };
238 };
239
240 modemtx-thermal {
241 polling-delay-passive = <250>;
242 polling-delay = <1000>;
243
244 thermal-sensors = <&tsens 2>;
245
246 trips {
247 modemtx_alert0: trip-point0 {
248 temperature = <90000>;
249 hysteresis = <2000>;
250 type = "hot";
251 };
252 };
253 };
254
255 video-thermal {
256 polling-delay-passive = <250>;
257 polling-delay = <1000>;
258
259 thermal-sensors = <&tsens 3>;
260
261 trips {
262 video_alert0: trip-point0 {
263 temperature = <95000>;
264 hysteresis = <2000>;
265 type = "hot";
266 };
267 };
268 };
269
270 wlan-thermal {
271 polling-delay-passive = <250>;
272 polling-delay = <1000>;
273
274 thermal-sensors = <&tsens 4>;
275
276 trips {
277 wlan_alert0: trip-point0 {
278 temperature = <105000>;
279 hysteresis = <2000>;
280 type = "hot";
281 };
282 };
283 };
284
285 gpu-thermal-top {
286 polling-delay-passive = <250>;
287 polling-delay = <1000>;
288
289 thermal-sensors = <&tsens 9>;
290
291 trips {
292 gpu1_alert0: trip-point0 {
293 temperature = <90000>;
294 hysteresis = <2000>;
295 type = "hot";
296 };
297 };
298 };
299
300 gpu-thermal-bottom {
301 polling-delay-passive = <250>;
302 polling-delay = <1000>;
303
304 thermal-sensors = <&tsens 10>;
305
306 trips {
307 gpu2_alert0: trip-point0 {
308 temperature = <90000>;
309 hysteresis = <2000>;
310 type = "hot";
311 };
312 };
313 };
314 };
315
316 cpu-pmu {
317 compatible = "qcom,krait-pmu";
318 interrupts = <GIC_PPI 7 0xf04>;
319 };
320
321 clocks {
322 xo_board: xo_board {
323 compatible = "fixed-clock";
324 #clock-cells = <0>;
325 clock-frequency = <19200000>;
326 };
327
328 sleep_clk: sleep_clk {
329 compatible = "fixed-clock";
330 #clock-cells = <0>;
331 clock-frequency = <32768>;
332 };
333 };
334
335 timer {
336 compatible = "arm,armv7-timer";
337 interrupts = <GIC_PPI 2 0xf08>,
338 <GIC_PPI 3 0xf08>,
339 <GIC_PPI 4 0xf08>,
340 <GIC_PPI 1 0xf08>;
341 clock-frequency = <19200000>;
342 };
343
344 adsp-pil {
345 compatible = "qcom,msm8974-adsp-pil";
346
347 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
348 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
349 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
350 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
351 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
352 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
353
354 cx-supply = <&pm8841_s2>;
355
356 clocks = <&xo_board>;
357 clock-names = "xo";
358
359 memory-region = <&adsp_region>;
360
361 qcom,smem-states = <&adsp_smp2p_out 0>;
362 qcom,smem-state-names = "stop";
363
364 smd-edge {
365 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
366
367 qcom,ipc = <&apcs 8 8>;
368 qcom,smd-edge = <1>;
369
370 label = "lpass";
371 };
372 };
373
374 smem {
375 compatible = "qcom,smem";
376
377 memory-region = <&smem_region>;
378 qcom,rpm-msg-ram = <&rpm_msg_ram>;
379
380 hwlocks = <&tcsr_mutex 3>;
381 };
382
383 smp2p-adsp {
384 compatible = "qcom,smp2p";
385 qcom,smem = <443>, <429>;
386
387 interrupt-parent = <&intc>;
388 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
389
390 qcom,ipc = <&apcs 8 10>;
391
392 qcom,local-pid = <0>;
393 qcom,remote-pid = <2>;
394
395 adsp_smp2p_out: master-kernel {
396 qcom,entry-name = "master-kernel";
397 #qcom,smem-state-cells = <1>;
398 };
399
400 adsp_smp2p_in: slave-kernel {
401 qcom,entry-name = "slave-kernel";
402
403 interrupt-controller;
404 #interrupt-cells = <2>;
405 };
406 };
407
408 smp2p-modem {
409 compatible = "qcom,smp2p";
410 qcom,smem = <435>, <428>;
411
412 interrupt-parent = <&intc>;
413 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
414
415 qcom,ipc = <&apcs 8 14>;
416
417 qcom,local-pid = <0>;
418 qcom,remote-pid = <1>;
419
420 modem_smp2p_out: master-kernel {
421 qcom,entry-name = "master-kernel";
422 #qcom,smem-state-cells = <1>;
423 };
424
425 modem_smp2p_in: slave-kernel {
426 qcom,entry-name = "slave-kernel";
427
428 interrupt-controller;
429 #interrupt-cells = <2>;
430 };
431 };
432
433 smp2p-wcnss {
434 compatible = "qcom,smp2p";
435 qcom,smem = <451>, <431>;
436
437 interrupt-parent = <&intc>;
438 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
439
440 qcom,ipc = <&apcs 8 18>;
441
442 qcom,local-pid = <0>;
443 qcom,remote-pid = <4>;
444
445 wcnss_smp2p_out: master-kernel {
446 qcom,entry-name = "master-kernel";
447
448 #qcom,smem-state-cells = <1>;
449 };
450
451 wcnss_smp2p_in: slave-kernel {
452 qcom,entry-name = "slave-kernel";
453
454 interrupt-controller;
455 #interrupt-cells = <2>;
456 };
457 };
458
459 smsm {
460 compatible = "qcom,smsm";
461
462 #address-cells = <1>;
463 #size-cells = <0>;
464
465 qcom,ipc-1 = <&apcs 8 13>;
466 qcom,ipc-2 = <&apcs 8 9>;
467 qcom,ipc-3 = <&apcs 8 19>;
468
469 apps_smsm: apps@0 {
470 reg = <0>;
471
472 #qcom,smem-state-cells = <1>;
473 };
474
475 modem_smsm: modem@1 {
476 reg = <1>;
477 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
478
479 interrupt-controller;
480 #interrupt-cells = <2>;
481 };
482
483 adsp_smsm: adsp@2 {
484 reg = <2>;
485 interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
486
487 interrupt-controller;
488 #interrupt-cells = <2>;
489 };
490
491 wcnss_smsm: wcnss@7 {
492 reg = <7>;
493 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
494
495 interrupt-controller;
496 #interrupt-cells = <2>;
497 };
498 };
499
500 firmware {
501 scm {
502 compatible = "qcom,scm";
503 clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
504 clock-names = "core", "bus", "iface";
505 };
506 };
507
508 soc: soc {
509 #address-cells = <1>;
510 #size-cells = <1>;
511 ranges;
512 compatible = "simple-bus";
513
514 intc: interrupt-controller@f9000000 {
515 compatible = "qcom,msm-qgic2";
516 interrupt-controller;
517 #interrupt-cells = <3>;
518 reg = <0xf9000000 0x1000>,
519 <0xf9002000 0x1000>;
520 };
521
522 apcs: syscon@f9011000 {
523 compatible = "syscon";
524 reg = <0xf9011000 0x1000>;
525 };
526
527 qfprom: qfprom@fc4bc000 {
528 #address-cells = <1>;
529 #size-cells = <1>;
530 compatible = "qcom,qfprom";
531 reg = <0xfc4bc000 0x1000>;
532 tsens_calib: calib@d0 {
533 reg = <0xd0 0x18>;
534 };
535 tsens_backup: backup@440 {
536 reg = <0x440 0x10>;
537 };
538 };
539
540 tsens: thermal-sensor@fc4a9000 {
541 compatible = "qcom,msm8974-tsens";
542 reg = <0xfc4a9000 0x1000>, /* TM */
543 <0xfc4a8000 0x1000>; /* SROT */
544 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
545 nvmem-cell-names = "calib", "calib_backup";
546 #qcom,sensors = <11>;
547 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
548 interrupt-names = "uplow";
549 #thermal-sensor-cells = <1>;
550 };
551
552 timer@f9020000 {
553 #address-cells = <1>;
554 #size-cells = <1>;
555 ranges;
556 compatible = "arm,armv7-timer-mem";
557 reg = <0xf9020000 0x1000>;
558 clock-frequency = <19200000>;
559
560 frame@f9021000 {
561 frame-number = <0>;
562 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
563 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
564 reg = <0xf9021000 0x1000>,
565 <0xf9022000 0x1000>;
566 };
567
568 frame@f9023000 {
569 frame-number = <1>;
570 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
571 reg = <0xf9023000 0x1000>;
572 status = "disabled";
573 };
574
575 frame@f9024000 {
576 frame-number = <2>;
577 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
578 reg = <0xf9024000 0x1000>;
579 status = "disabled";
580 };
581
582 frame@f9025000 {
583 frame-number = <3>;
584 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
585 reg = <0xf9025000 0x1000>;
586 status = "disabled";
587 };
588
589 frame@f9026000 {
590 frame-number = <4>;
591 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
592 reg = <0xf9026000 0x1000>;
593 status = "disabled";
594 };
595
596 frame@f9027000 {
597 frame-number = <5>;
598 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
599 reg = <0xf9027000 0x1000>;
600 status = "disabled";
601 };
602
603 frame@f9028000 {
604 frame-number = <6>;
605 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
606 reg = <0xf9028000 0x1000>;
607 status = "disabled";
608 };
609 };
610
611 saw0: power-controller@f9089000 {
612 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
613 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
614 };
615
616 saw1: power-controller@f9099000 {
617 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
618 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
619 };
620
621 saw2: power-controller@f90a9000 {
622 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
623 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
624 };
625
626 saw3: power-controller@f90b9000 {
627 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
628 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
629 };
630
631 saw_l2: power-controller@f9012000 {
632 compatible = "qcom,saw2";
633 reg = <0xf9012000 0x1000>;
634 regulator;
635 };
636
637 acc0: clock-controller@f9088000 {
638 compatible = "qcom,kpss-acc-v2";
639 reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
640 };
641
642 acc1: clock-controller@f9098000 {
643 compatible = "qcom,kpss-acc-v2";
644 reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
645 };
646
647 acc2: clock-controller@f90a8000 {
648 compatible = "qcom,kpss-acc-v2";
649 reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
650 };
651
652 acc3: clock-controller@f90b8000 {
653 compatible = "qcom,kpss-acc-v2";
654 reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
655 };
656
657 restart@fc4ab000 {
658 compatible = "qcom,pshold";
659 reg = <0xfc4ab000 0x4>;
660 };
661
662 gcc: clock-controller@fc400000 {
663 compatible = "qcom,gcc-msm8974";
664 #clock-cells = <1>;
665 #reset-cells = <1>;
666 #power-domain-cells = <1>;
667 reg = <0xfc400000 0x4000>;
668 };
669
670 tcsr: syscon@fd4a0000 {
671 compatible = "syscon";
672 reg = <0xfd4a0000 0x10000>;
673 };
674
675 tcsr_mutex_block: syscon@fd484000 {
676 compatible = "syscon";
677 reg = <0xfd484000 0x2000>;
678 };
679
680 mmcc: clock-controller@fd8c0000 {
681 compatible = "qcom,mmcc-msm8974";
682 #clock-cells = <1>;
683 #reset-cells = <1>;
684 #power-domain-cells = <1>;
685 reg = <0xfd8c0000 0x6000>;
686 };
687
688 tcsr_mutex: tcsr-mutex {
689 compatible = "qcom,tcsr-mutex";
690 syscon = <&tcsr_mutex_block 0 0x80>;
691
692 #hwlock-cells = <1>;
693 };
694
695 rpm_msg_ram: memory@fc428000 {
696 compatible = "qcom,rpm-msg-ram";
697 reg = <0xfc428000 0x4000>;
698 };
699
700 blsp1_uart1: serial@f991d000 {
701 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
702 reg = <0xf991d000 0x1000>;
703 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
704 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
705 clock-names = "core", "iface";
706 status = "disabled";
707 };
708
709 blsp1_uart2: serial@f991e000 {
710 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
711 reg = <0xf991e000 0x1000>;
712 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
713 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
714 clock-names = "core", "iface";
715 status = "disabled";
716 };
717
718 blsp2_uart8: serial@f995e000 {
719 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
720 reg = <0xf995e000 0x1000>;
721 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
722 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
723 clock-names = "core", "iface";
724 status = "disabled";
725 };
726
727 blsp2_uart10: serial@f9960000 {
728 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
729 reg = <0xf9960000 0x1000>;
730 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
731 clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
732 clock-names = "core", "iface";
733 status = "disabled";
734 };
735
736 sdhci@f9824900 {
737 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
738 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
739 reg-names = "hc_mem", "core_mem";
740 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
741 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
742 interrupt-names = "hc_irq", "pwr_irq";
743 clocks = <&gcc GCC_SDCC1_APPS_CLK>,
744 <&gcc GCC_SDCC1_AHB_CLK>,
745 <&xo_board>;
746 clock-names = "core", "iface", "xo";
747 status = "disabled";
748 };
749
750 sdhci@f9864900 {
751 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
752 reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
753 reg-names = "hc_mem", "core_mem";
754 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
755 <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
756 interrupt-names = "hc_irq", "pwr_irq";
757 clocks = <&gcc GCC_SDCC3_APPS_CLK>,
758 <&gcc GCC_SDCC3_AHB_CLK>,
759 <&xo_board>;
760 clock-names = "core", "iface", "xo";
761 status = "disabled";
762 };
763
764 sdhci@f98a4900 {
765 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
766 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
767 reg-names = "hc_mem", "core_mem";
768 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
769 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
770 interrupt-names = "hc_irq", "pwr_irq";
771 clocks = <&gcc GCC_SDCC2_APPS_CLK>,
772 <&gcc GCC_SDCC2_AHB_CLK>,
773 <&xo_board>;
774 clock-names = "core", "iface", "xo";
775 status = "disabled";
776 };
777
778 otg: usb@f9a55000 {
779 compatible = "qcom,ci-hdrc";
780 reg = <0xf9a55000 0x200>,
781 <0xf9a55200 0x200>;
782 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
783 clocks = <&gcc GCC_USB_HS_AHB_CLK>,
784 <&gcc GCC_USB_HS_SYSTEM_CLK>;
785 clock-names = "iface", "core";
786 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
787 assigned-clock-rates = <75000000>;
788 resets = <&gcc GCC_USB_HS_BCR>;
789 reset-names = "core";
790 phy_type = "ulpi";
791 dr_mode = "otg";
792 ahb-burst-config = <0>;
793 phy-names = "usb-phy";
794 status = "disabled";
795 #reset-cells = <1>;
796
797 ulpi {
798 usb_hs1_phy: phy@a {
799 compatible = "qcom,usb-hs-phy-msm8974",
800 "qcom,usb-hs-phy";
801 #phy-cells = <0>;
802 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
803 clock-names = "ref", "sleep";
804 resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
805 reset-names = "phy", "por";
806 status = "disabled";
807 };
808
809 usb_hs2_phy: phy@b {
810 compatible = "qcom,usb-hs-phy-msm8974",
811 "qcom,usb-hs-phy";
812 #phy-cells = <0>;
813 clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
814 clock-names = "ref", "sleep";
815 resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
816 reset-names = "phy", "por";
817 status = "disabled";
818 };
819 };
820 };
821
822 rng@f9bff000 {
823 compatible = "qcom,prng";
824 reg = <0xf9bff000 0x200>;
825 clocks = <&gcc GCC_PRNG_AHB_CLK>;
826 clock-names = "core";
827 };
828
829 remoteproc@fc880000 {
830 compatible = "qcom,msm8974-mss-pil";
831 reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
832 reg-names = "qdsp6", "rmb";
833
834 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
835 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
836 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
837 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
838 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
839 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
840
841 clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
842 <&gcc GCC_MSS_CFG_AHB_CLK>,
843 <&gcc GCC_BOOT_ROM_AHB_CLK>,
844 <&xo_board>;
845 clock-names = "iface", "bus", "mem", "xo";
846
847 resets = <&gcc GCC_MSS_RESTART>;
848 reset-names = "mss_restart";
849
850 cx-supply = <&pm8841_s2>;
851 mss-supply = <&pm8841_s3>;
852 mx-supply = <&pm8841_s1>;
853 pll-supply = <&pm8941_l12>;
854
855 qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
856
857 qcom,smem-states = <&modem_smp2p_out 0>;
858 qcom,smem-state-names = "stop";
859
860 mba {
861 memory-region = <&mba_region>;
862 };
863
864 mpss {
865 memory-region = <&mpss_region>;
866 };
867
868 smd-edge {
869 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
870
871 qcom,ipc = <&apcs 8 12>;
872 qcom,smd-edge = <0>;
873
874 label = "modem";
875 };
876 };
877
878 pronto: remoteproc@fb21b000 {
879 compatible = "qcom,pronto-v2-pil", "qcom,pronto";
880 reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
881 reg-names = "ccu", "dxe", "pmu";
882
883 memory-region = <&wcnss_region>;
884
885 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
886 <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
887 <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
888 <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
889 <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
890 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
891
892 vddpx-supply = <&pm8941_s3>;
893
894 qcom,smem-states = <&wcnss_smp2p_out 0>;
895 qcom,smem-state-names = "stop";
896
897 status = "disabled";
898
899 iris {
900 compatible = "qcom,wcn3680";
901
902 clocks = <&rpmcc RPM_SMD_CXO_A2>;
903 clock-names = "xo";
904
905 vddxo-supply = <&pm8941_l6>;
906 vddrfa-supply = <&pm8941_l11>;
907 vddpa-supply = <&pm8941_l19>;
908 vdddig-supply = <&pm8941_s3>;
909 };
910
911 smd-edge {
912 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
913
914 qcom,ipc = <&apcs 8 17>;
915 qcom,smd-edge = <6>;
916
917 wcnss {
918 compatible = "qcom,wcnss";
919 qcom,smd-channels = "WCNSS_CTRL";
920 status = "disabled";
921
922 qcom,mmio = <&pronto>;
923
924 bt {
925 compatible = "qcom,wcnss-bt";
926 };
927
928 wifi {
929 compatible = "qcom,wcnss-wlan";
930
931 interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
932 <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
933 interrupt-names = "tx", "rx";
934
935 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
936 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
937 };
938 };
939 };
940 };
941
942 msmgpio: pinctrl@fd510000 {
943 compatible = "qcom,msm8974-pinctrl";
944 reg = <0xfd510000 0x4000>;
945 gpio-controller;
946 gpio-ranges = <&msmgpio 0 0 146>;
947 #gpio-cells = <2>;
948 interrupt-controller;
949 #interrupt-cells = <2>;
950 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
951 };
952
953 i2c@f9923000 {
954 status = "disabled";
955 compatible = "qcom,i2c-qup-v2.1.1";
956 reg = <0xf9923000 0x1000>;
957 interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
958 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
959 clock-names = "core", "iface";
960 #address-cells = <1>;
961 #size-cells = <0>;
962 };
963
964 i2c@f9924000 {
965 status = "disabled";
966 compatible = "qcom,i2c-qup-v2.1.1";
967 reg = <0xf9924000 0x1000>;
968 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
969 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
970 clock-names = "core", "iface";
971 #address-cells = <1>;
972 #size-cells = <0>;
973 };
974
975 blsp_i2c3: i2c@f9925000 {
976 status = "disabled";
977 compatible = "qcom,i2c-qup-v2.1.1";
978 reg = <0xf9925000 0x1000>;
979 interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
980 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
981 clock-names = "core", "iface";
982 #address-cells = <1>;
983 #size-cells = <0>;
984 };
985
986 blsp_i2c6: i2c@f9928000 {
987 status = "disabled";
988 compatible = "qcom,i2c-qup-v2.1.1";
989 reg = <0xf9928000 0x1000>;
990 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
991 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
992 clock-names = "core", "iface";
993 #address-cells = <1>;
994 #size-cells = <0>;
995 };
996
997 blsp_i2c8: i2c@f9964000 {
998 status = "disabled";
999 compatible = "qcom,i2c-qup-v2.1.1";
1000 reg = <0xf9964000 0x1000>;
1001 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1002 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1003 clock-names = "core", "iface";
1004 #address-cells = <1>;
1005 #size-cells = <0>;
1006 };
1007
1008 blsp_i2c11: i2c@f9967000 {
1009 status = "disabled";
1010 compatible = "qcom,i2c-qup-v2.1.1";
1011 reg = <0xf9967000 0x1000>;
1012 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1013 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1014 clock-names = "core", "iface";
1015 #address-cells = <1>;
1016 #size-cells = <0>;
1017 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
1018 dma-names = "tx", "rx";
1019 };
1020
1021 blsp_i2c12: i2c@f9968000 {
1022 status = "disabled";
1023 compatible = "qcom,i2c-qup-v2.1.1";
1024 reg = <0xf9968000 0x1000>;
1025 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
1026 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1027 clock-names = "core", "iface";
1028 #address-cells = <1>;
1029 #size-cells = <0>;
1030 };
1031
1032 spmi_bus: spmi@fc4cf000 {
1033 compatible = "qcom,spmi-pmic-arb";
1034 reg-names = "core", "intr", "cnfg";
1035 reg = <0xfc4cf000 0x1000>,
1036 <0xfc4cb000 0x1000>,
1037 <0xfc4ca000 0x1000>;
1038 interrupt-names = "periph_irq";
1039 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1040 qcom,ee = <0>;
1041 qcom,channel = <0>;
1042 #address-cells = <2>;
1043 #size-cells = <0>;
1044 interrupt-controller;
1045 #interrupt-cells = <4>;
1046 };
1047
1048 blsp2_dma: dma-controller@f9944000 {
1049 compatible = "qcom,bam-v1.4.0";
1050 reg = <0xf9944000 0x19000>;
1051 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
1052 clocks = <&gcc GCC_BLSP2_AHB_CLK>;
1053 clock-names = "bam_clk";
1054 #dma-cells = <1>;
1055 qcom,ee = <0>;
1056 };
1057
1058 etr@fc322000 {
1059 compatible = "arm,coresight-tmc", "arm,primecell";
1060 reg = <0xfc322000 0x1000>;
1061
1062 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1063 clock-names = "apb_pclk", "atclk";
1064
1065 in-ports {
1066 port {
1067 etr_in: endpoint {
1068 remote-endpoint = <&replicator_out0>;
1069 };
1070 };
1071 };
1072 };
1073
1074 tpiu@fc318000 {
1075 compatible = "arm,coresight-tpiu", "arm,primecell";
1076 reg = <0xfc318000 0x1000>;
1077
1078 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1079 clock-names = "apb_pclk", "atclk";
1080
1081 in-ports {
1082 port {
1083 tpiu_in: endpoint {
1084 remote-endpoint = <&replicator_out1>;
1085 };
1086 };
1087 };
1088 };
1089
1090 replicator@fc31c000 {
1091 compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1092 reg = <0xfc31c000 0x1000>;
1093
1094 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1095 clock-names = "apb_pclk", "atclk";
1096
1097 out-ports {
1098 #address-cells = <1>;
1099 #size-cells = <0>;
1100
1101 port@0 {
1102 reg = <0>;
1103 replicator_out0: endpoint {
1104 remote-endpoint = <&etr_in>;
1105 };
1106 };
1107 port@1 {
1108 reg = <1>;
1109 replicator_out1: endpoint {
1110 remote-endpoint = <&tpiu_in>;
1111 };
1112 };
1113 };
1114
1115 in-ports {
1116 port {
1117 replicator_in: endpoint {
1118 remote-endpoint = <&etf_out>;
1119 };
1120 };
1121 };
1122 };
1123
1124 etf@fc307000 {
1125 compatible = "arm,coresight-tmc", "arm,primecell";
1126 reg = <0xfc307000 0x1000>;
1127
1128 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1129 clock-names = "apb_pclk", "atclk";
1130
1131 out-ports {
1132 port {
1133 etf_out: endpoint {
1134 remote-endpoint = <&replicator_in>;
1135 };
1136 };
1137 };
1138
1139 in-ports {
1140 port {
1141 etf_in: endpoint {
1142 remote-endpoint = <&merger_out>;
1143 };
1144 };
1145 };
1146 };
1147
1148 funnel@fc31b000 {
1149 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1150 reg = <0xfc31b000 0x1000>;
1151
1152 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1153 clock-names = "apb_pclk", "atclk";
1154
1155 in-ports {
1156 #address-cells = <1>;
1157 #size-cells = <0>;
1158
1159 /*
1160 * Not described input ports:
1161 * 0 - connected trought funnel to Audio, Modem and
1162 * Resource and Power Manager CPU's
1163 * 2...7 - not-connected
1164 */
1165 port@1 {
1166 reg = <1>;
1167 merger_in1: endpoint {
1168 remote-endpoint = <&funnel1_out>;
1169 };
1170 };
1171 };
1172
1173 out-ports {
1174 port {
1175 merger_out: endpoint {
1176 remote-endpoint = <&etf_in>;
1177 };
1178 };
1179 };
1180 };
1181
1182 funnel@fc31a000 {
1183 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1184 reg = <0xfc31a000 0x1000>;
1185
1186 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1187 clock-names = "apb_pclk", "atclk";
1188
1189 in-ports {
1190 #address-cells = <1>;
1191 #size-cells = <0>;
1192
1193 /*
1194 * Not described input ports:
1195 * 0 - not-connected
1196 * 1 - connected trought funnel to Multimedia CPU
1197 * 2 - connected to Wireless CPU
1198 * 3 - not-connected
1199 * 4 - not-connected
1200 * 6 - not-connected
1201 * 7 - connected to STM
1202 */
1203 port@5 {
1204 reg = <5>;
1205 funnel1_in5: endpoint {
1206 remote-endpoint = <&kpss_out>;
1207 };
1208 };
1209 };
1210
1211 out-ports {
1212 port {
1213 funnel1_out: endpoint {
1214 remote-endpoint = <&merger_in1>;
1215 };
1216 };
1217 };
1218 };
1219
1220 funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
1221 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1222 reg = <0xfc345000 0x1000>;
1223
1224 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1225 clock-names = "apb_pclk", "atclk";
1226
1227 in-ports {
1228 #address-cells = <1>;
1229 #size-cells = <0>;
1230
1231 port@0 {
1232 reg = <0>;
1233 kpss_in0: endpoint {
1234 remote-endpoint = <&etm0_out>;
1235 };
1236 };
1237 port@1 {
1238 reg = <1>;
1239 kpss_in1: endpoint {
1240 remote-endpoint = <&etm1_out>;
1241 };
1242 };
1243 port@2 {
1244 reg = <2>;
1245 kpss_in2: endpoint {
1246 remote-endpoint = <&etm2_out>;
1247 };
1248 };
1249 port@3 {
1250 reg = <3>;
1251 kpss_in3: endpoint {
1252 remote-endpoint = <&etm3_out>;
1253 };
1254 };
1255 };
1256
1257 out-ports {
1258 port {
1259 kpss_out: endpoint {
1260 remote-endpoint = <&funnel1_in5>;
1261 };
1262 };
1263 };
1264 };
1265
1266 etm@fc33c000 {
1267 compatible = "arm,coresight-etm4x", "arm,primecell";
1268 reg = <0xfc33c000 0x1000>;
1269
1270 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1271 clock-names = "apb_pclk", "atclk";
1272
1273 cpu = <&CPU0>;
1274
1275 out-ports {
1276 port {
1277 etm0_out: endpoint {
1278 remote-endpoint = <&kpss_in0>;
1279 };
1280 };
1281 };
1282 };
1283
1284 etm@fc33d000 {
1285 compatible = "arm,coresight-etm4x", "arm,primecell";
1286 reg = <0xfc33d000 0x1000>;
1287
1288 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1289 clock-names = "apb_pclk", "atclk";
1290
1291 cpu = <&CPU1>;
1292
1293 out-ports {
1294 port {
1295 etm1_out: endpoint {
1296 remote-endpoint = <&kpss_in1>;
1297 };
1298 };
1299 };
1300 };
1301
1302 etm@fc33e000 {
1303 compatible = "arm,coresight-etm4x", "arm,primecell";
1304 reg = <0xfc33e000 0x1000>;
1305
1306 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1307 clock-names = "apb_pclk", "atclk";
1308
1309 cpu = <&CPU2>;
1310
1311 out-ports {
1312 port {
1313 etm2_out: endpoint {
1314 remote-endpoint = <&kpss_in2>;
1315 };
1316 };
1317 };
1318 };
1319
1320 etm@fc33f000 {
1321 compatible = "arm,coresight-etm4x", "arm,primecell";
1322 reg = <0xfc33f000 0x1000>;
1323
1324 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1325 clock-names = "apb_pclk", "atclk";
1326
1327 cpu = <&CPU3>;
1328
1329 out-ports {
1330 port {
1331 etm3_out: endpoint {
1332 remote-endpoint = <&kpss_in3>;
1333 };
1334 };
1335 };
1336 };
1337
1338 ocmem@fdd00000 {
1339 compatible = "qcom,msm8974-ocmem";
1340 reg = <0xfdd00000 0x2000>,
1341 <0xfec00000 0x180000>;
1342 reg-names = "ctrl",
1343 "mem";
1344 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1345 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1346 clock-names = "core",
1347 "iface";
1348
1349 #address-cells = <1>;
1350 #size-cells = <1>;
1351
1352 gmu_sram: gmu-sram@0 {
1353 reg = <0x0 0x100000>;
1354 };
1355 };
1356
1357 bimc: interconnect@fc380000 {
1358 reg = <0xfc380000 0x6a000>;
1359 compatible = "qcom,msm8974-bimc";
1360 #interconnect-cells = <1>;
1361 clock-names = "bus", "bus_a";
1362 clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
1363 <&rpmcc RPM_SMD_BIMC_A_CLK>;
1364 };
1365
1366 snoc: interconnect@fc460000 {
1367 reg = <0xfc460000 0x4000>;
1368 compatible = "qcom,msm8974-snoc";
1369 #interconnect-cells = <1>;
1370 clock-names = "bus", "bus_a";
1371 clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
1372 <&rpmcc RPM_SMD_SNOC_A_CLK>;
1373 };
1374
1375 pnoc: interconnect@fc468000 {
1376 reg = <0xfc468000 0x4000>;
1377 compatible = "qcom,msm8974-pnoc";
1378 #interconnect-cells = <1>;
1379 clock-names = "bus", "bus_a";
1380 clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
1381 <&rpmcc RPM_SMD_PNOC_A_CLK>;
1382 };
1383
1384 ocmemnoc: interconnect@fc470000 {
1385 reg = <0xfc470000 0x4000>;
1386 compatible = "qcom,msm8974-ocmemnoc";
1387 #interconnect-cells = <1>;
1388 clock-names = "bus", "bus_a";
1389 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1390 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
1391 };
1392
1393 mmssnoc: interconnect@fc478000 {
1394 reg = <0xfc478000 0x4000>;
1395 compatible = "qcom,msm8974-mmssnoc";
1396 #interconnect-cells = <1>;
1397 clock-names = "bus", "bus_a";
1398 clocks = <&mmcc MMSS_S0_AXI_CLK>,
1399 <&mmcc MMSS_S0_AXI_CLK>;
1400 };
1401
1402 cnoc: interconnect@fc480000 {
1403 reg = <0xfc480000 0x4000>;
1404 compatible = "qcom,msm8974-cnoc";
1405 #interconnect-cells = <1>;
1406 clock-names = "bus", "bus_a";
1407 clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
1408 <&rpmcc RPM_SMD_CNOC_A_CLK>;
1409 };
1410
1411 gpu: adreno@fdb00000 {
1412 status = "disabled";
1413
1414 compatible = "qcom,adreno-330.1",
1415 "qcom,adreno";
1416 reg = <0xfdb00000 0x10000>;
1417 reg-names = "kgsl_3d0_reg_memory";
1418 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1419 interrupt-names = "kgsl_3d0_irq";
1420 clock-names = "core",
1421 "iface",
1422 "mem_iface";
1423 clocks = <&mmcc OXILI_GFX3D_CLK>,
1424 <&mmcc OXILICX_AHB_CLK>,
1425 <&mmcc OXILICX_AXI_CLK>;
1426 sram = <&gmu_sram>;
1427 power-domains = <&mmcc OXILICX_GDSC>;
1428 operating-points-v2 = <&gpu_opp_table>;
1429
1430 interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
1431 <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
1432 interconnect-names = "gfx-mem",
1433 "ocmem";
1434
1435 // iommus = <&gpu_iommu 0>;
1436
1437 gpu_opp_table: opp_table {
1438 compatible = "operating-points-v2";
1439
1440 opp-320000000 {
1441 opp-hz = /bits/ 64 <320000000>;
1442 };
1443
1444 opp-200000000 {
1445 opp-hz = /bits/ 64 <200000000>;
1446 };
1447
1448 opp-27000000 {
1449 opp-hz = /bits/ 64 <27000000>;
1450 };
1451 };
1452 };
1453
1454 mdss: mdss@fd900000 {
1455 status = "disabled";
1456
1457 compatible = "qcom,mdss";
1458 reg = <0xfd900000 0x100>,
1459 <0xfd924000 0x1000>;
1460 reg-names = "mdss_phys",
1461 "vbif_phys";
1462
1463 power-domains = <&mmcc MDSS_GDSC>;
1464
1465 clocks = <&mmcc MDSS_AHB_CLK>,
1466 <&mmcc MDSS_AXI_CLK>,
1467 <&mmcc MDSS_VSYNC_CLK>;
1468 clock-names = "iface",
1469 "bus",
1470 "vsync";
1471
1472 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1473
1474 interrupt-controller;
1475 #interrupt-cells = <1>;
1476
1477 #address-cells = <1>;
1478 #size-cells = <1>;
1479 ranges;
1480
1481 mdp: mdp@fd900000 {
1482 status = "disabled";
1483
1484 compatible = "qcom,mdp5";
1485 reg = <0xfd900100 0x22000>;
1486 reg-names = "mdp_phys";
1487
1488 interrupt-parent = <&mdss>;
1489 interrupts = <0 0>;
1490
1491 clocks = <&mmcc MDSS_AHB_CLK>,
1492 <&mmcc MDSS_AXI_CLK>,
1493 <&mmcc MDSS_MDP_CLK>,
1494 <&mmcc MDSS_VSYNC_CLK>;
1495 clock-names = "iface",
1496 "bus",
1497 "core",
1498 "vsync";
1499
1500 interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
1501 interconnect-names = "mdp0-mem";
1502
1503 ports {
1504 #address-cells = <1>;
1505 #size-cells = <0>;
1506
1507 port@0 {
1508 reg = <0>;
1509 mdp5_intf1_out: endpoint {
1510 remote-endpoint = <&dsi0_in>;
1511 };
1512 };
1513 };
1514 };
1515
1516 dsi0: dsi@fd922800 {
1517 status = "disabled";
1518
1519 compatible = "qcom,mdss-dsi-ctrl";
1520 reg = <0xfd922800 0x1f8>;
1521 reg-names = "dsi_ctrl";
1522
1523 interrupt-parent = <&mdss>;
1524 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
1525
1526 assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
1527 <&mmcc PCLK0_CLK_SRC>;
1528 assigned-clock-parents = <&dsi_phy0 0>,
1529 <&dsi_phy0 1>;
1530
1531 clocks = <&mmcc MDSS_MDP_CLK>,
1532 <&mmcc MDSS_AHB_CLK>,
1533 <&mmcc MDSS_AXI_CLK>,
1534 <&mmcc MDSS_BYTE0_CLK>,
1535 <&mmcc MDSS_PCLK0_CLK>,
1536 <&mmcc MDSS_ESC0_CLK>,
1537 <&mmcc MMSS_MISC_AHB_CLK>;
1538 clock-names = "mdp_core",
1539 "iface",
1540 "bus",
1541 "byte",
1542 "pixel",
1543 "core",
1544 "core_mmss";
1545
1546 phys = <&dsi_phy0>;
1547 phy-names = "dsi-phy";
1548
1549 ports {
1550 #address-cells = <1>;
1551 #size-cells = <0>;
1552
1553 port@0 {
1554 reg = <0>;
1555 dsi0_in: endpoint {
1556 remote-endpoint = <&mdp5_intf1_out>;
1557 };
1558 };
1559
1560 port@1 {
1561 reg = <1>;
1562 dsi0_out: endpoint {
1563 };
1564 };
1565 };
1566 };
1567
1568 dsi_phy0: dsi-phy@fd922a00 {
1569 status = "disabled";
1570
1571 compatible = "qcom,dsi-phy-28nm-hpm";
1572 reg = <0xfd922a00 0xd4>,
1573 <0xfd922b00 0x280>,
1574 <0xfd922d80 0x30>;
1575 reg-names = "dsi_pll",
1576 "dsi_phy",
1577 "dsi_phy_regulator";
1578
1579 #clock-cells = <1>;
1580 #phy-cells = <0>;
1581 qcom,dsi-phy-index = <0>;
1582
1583 clocks = <&mmcc MDSS_AHB_CLK>;
1584 clock-names = "iface";
1585 };
1586 };
1587
1588 imem@fe805000 {
1589 status = "disabled";
1590 compatible = "syscon", "simple-mfd";
1591 reg = <0xfe805000 0x1000>;
1592
1593 reboot-mode {
1594 compatible = "syscon-reboot-mode";
1595 offset = <0x65c>;
1596 };
1597 };
1598 };
1599
1600 smd {
1601 compatible = "qcom,smd";
1602
1603 rpm {
1604 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1605 qcom,ipc = <&apcs 8 0>;
1606 qcom,smd-edge = <15>;
1607
1608 rpm_requests {
1609 compatible = "qcom,rpm-msm8974";
1610 qcom,smd-channels = "rpm_requests";
1611
1612 rpmcc: clock-controller {
1613 compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1614 #clock-cells = <1>;
1615 };
1616
1617 pm8841-regulators {
1618 compatible = "qcom,rpm-pm8841-regulators";
1619
1620 pm8841_s1: s1 {};
1621 pm8841_s2: s2 {};
1622 pm8841_s3: s3 {};
1623 pm8841_s4: s4 {};
1624 pm8841_s5: s5 {};
1625 pm8841_s6: s6 {};
1626 pm8841_s7: s7 {};
1627 pm8841_s8: s8 {};
1628 };
1629
1630 pm8941-regulators {
1631 compatible = "qcom,rpm-pm8941-regulators";
1632
1633 pm8941_s1: s1 {};
1634 pm8941_s2: s2 {};
1635 pm8941_s3: s3 {};
1636
1637 pm8941_l1: l1 {};
1638 pm8941_l2: l2 {};
1639 pm8941_l3: l3 {};
1640 pm8941_l4: l4 {};
1641 pm8941_l5: l5 {};
1642 pm8941_l6: l6 {};
1643 pm8941_l7: l7 {};
1644 pm8941_l8: l8 {};
1645 pm8941_l9: l9 {};
1646 pm8941_l10: l10 {};
1647 pm8941_l11: l11 {};
1648 pm8941_l12: l12 {};
1649 pm8941_l13: l13 {};
1650 pm8941_l14: l14 {};
1651 pm8941_l15: l15 {};
1652 pm8941_l16: l16 {};
1653 pm8941_l17: l17 {};
1654 pm8941_l18: l18 {};
1655 pm8941_l19: l19 {};
1656 pm8941_l20: l20 {};
1657 pm8941_l21: l21 {};
1658 pm8941_l22: l22 {};
1659 pm8941_l23: l23 {};
1660 pm8941_l24: l24 {};
1661
1662 pm8941_lvs1: lvs1 {};
1663 pm8941_lvs2: lvs2 {};
1664 pm8941_lvs3: lvs3 {};
1665 };
1666 };
1667 };
1668 };
1669
1670 vreg_boost: vreg-boost {
1671 compatible = "regulator-fixed";
1672
1673 regulator-name = "vreg-boost";
1674 regulator-min-microvolt = <3150000>;
1675 regulator-max-microvolt = <3150000>;
1676
1677 regulator-always-on;
1678 regulator-boot-on;
1679
1680 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1681 enable-active-high;
1682
1683 pinctrl-names = "default";
1684 pinctrl-0 = <&boost_bypass_n_pin>;
1685 };
1686 vreg_vph_pwr: vreg-vph-pwr {
1687 compatible = "regulator-fixed";
1688 regulator-name = "vph-pwr";
1689
1690 regulator-min-microvolt = <3600000>;
1691 regulator-max-microvolt = <3600000>;
1692
1693 regulator-always-on;
1694 };
1695};
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/qcom,gcc-msm8974.h>
6#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
7#include <dt-bindings/clock/qcom,rpmcc.h>
8#include <dt-bindings/reset/qcom,gcc-msm8974.h>
9#include <dt-bindings/gpio/gpio.h>
10
11/ {
12 #address-cells = <1>;
13 #size-cells = <1>;
14 model = "Qualcomm MSM8974";
15 compatible = "qcom,msm8974";
16 interrupt-parent = <&intc>;
17
18 reserved-memory {
19 #address-cells = <1>;
20 #size-cells = <1>;
21 ranges;
22
23 mpss@8000000 {
24 reg = <0x08000000 0x5100000>;
25 no-map;
26 };
27
28 mba@d100000 {
29 reg = <0x0d100000 0x100000>;
30 no-map;
31 };
32
33 reserved@d200000 {
34 reg = <0x0d200000 0xa00000>;
35 no-map;
36 };
37
38 adsp_region: adsp@dc00000 {
39 reg = <0x0dc00000 0x1900000>;
40 no-map;
41 };
42
43 venus@f500000 {
44 reg = <0x0f500000 0x500000>;
45 no-map;
46 };
47
48 smem_region: smem@fa00000 {
49 reg = <0xfa00000 0x200000>;
50 no-map;
51 };
52
53 tz@fc00000 {
54 reg = <0x0fc00000 0x160000>;
55 no-map;
56 };
57
58 rfsa@fd60000 {
59 reg = <0x0fd60000 0x20000>;
60 no-map;
61 };
62
63 rmtfs@fd80000 {
64 reg = <0x0fd80000 0x180000>;
65 no-map;
66 };
67 };
68
69 cpus {
70 #address-cells = <1>;
71 #size-cells = <0>;
72 interrupts = <GIC_PPI 9 0xf04>;
73
74 CPU0: cpu@0 {
75 compatible = "qcom,krait";
76 enable-method = "qcom,kpss-acc-v2";
77 device_type = "cpu";
78 reg = <0>;
79 next-level-cache = <&L2>;
80 qcom,acc = <&acc0>;
81 qcom,saw = <&saw0>;
82 cpu-idle-states = <&CPU_SPC>;
83 };
84
85 CPU1: cpu@1 {
86 compatible = "qcom,krait";
87 enable-method = "qcom,kpss-acc-v2";
88 device_type = "cpu";
89 reg = <1>;
90 next-level-cache = <&L2>;
91 qcom,acc = <&acc1>;
92 qcom,saw = <&saw1>;
93 cpu-idle-states = <&CPU_SPC>;
94 };
95
96 CPU2: cpu@2 {
97 compatible = "qcom,krait";
98 enable-method = "qcom,kpss-acc-v2";
99 device_type = "cpu";
100 reg = <2>;
101 next-level-cache = <&L2>;
102 qcom,acc = <&acc2>;
103 qcom,saw = <&saw2>;
104 cpu-idle-states = <&CPU_SPC>;
105 };
106
107 CPU3: cpu@3 {
108 compatible = "qcom,krait";
109 enable-method = "qcom,kpss-acc-v2";
110 device_type = "cpu";
111 reg = <3>;
112 next-level-cache = <&L2>;
113 qcom,acc = <&acc3>;
114 qcom,saw = <&saw3>;
115 cpu-idle-states = <&CPU_SPC>;
116 };
117
118 L2: l2-cache {
119 compatible = "cache";
120 cache-level = <2>;
121 qcom,saw = <&saw_l2>;
122 };
123
124 idle-states {
125 CPU_SPC: spc {
126 compatible = "qcom,idle-state-spc",
127 "arm,idle-state";
128 entry-latency-us = <150>;
129 exit-latency-us = <200>;
130 min-residency-us = <2000>;
131 };
132 };
133 };
134
135 memory {
136 device_type = "memory";
137 reg = <0x0 0x0>;
138 };
139
140 thermal-zones {
141 cpu-thermal0 {
142 polling-delay-passive = <250>;
143 polling-delay = <1000>;
144
145 thermal-sensors = <&tsens 5>;
146
147 trips {
148 cpu_alert0: trip0 {
149 temperature = <75000>;
150 hysteresis = <2000>;
151 type = "passive";
152 };
153 cpu_crit0: trip1 {
154 temperature = <110000>;
155 hysteresis = <2000>;
156 type = "critical";
157 };
158 };
159 };
160
161 cpu-thermal1 {
162 polling-delay-passive = <250>;
163 polling-delay = <1000>;
164
165 thermal-sensors = <&tsens 6>;
166
167 trips {
168 cpu_alert1: trip0 {
169 temperature = <75000>;
170 hysteresis = <2000>;
171 type = "passive";
172 };
173 cpu_crit1: trip1 {
174 temperature = <110000>;
175 hysteresis = <2000>;
176 type = "critical";
177 };
178 };
179 };
180
181 cpu-thermal2 {
182 polling-delay-passive = <250>;
183 polling-delay = <1000>;
184
185 thermal-sensors = <&tsens 7>;
186
187 trips {
188 cpu_alert2: trip0 {
189 temperature = <75000>;
190 hysteresis = <2000>;
191 type = "passive";
192 };
193 cpu_crit2: trip1 {
194 temperature = <110000>;
195 hysteresis = <2000>;
196 type = "critical";
197 };
198 };
199 };
200
201 cpu-thermal3 {
202 polling-delay-passive = <250>;
203 polling-delay = <1000>;
204
205 thermal-sensors = <&tsens 8>;
206
207 trips {
208 cpu_alert3: trip0 {
209 temperature = <75000>;
210 hysteresis = <2000>;
211 type = "passive";
212 };
213 cpu_crit3: trip1 {
214 temperature = <110000>;
215 hysteresis = <2000>;
216 type = "critical";
217 };
218 };
219 };
220 };
221
222 cpu-pmu {
223 compatible = "qcom,krait-pmu";
224 interrupts = <GIC_PPI 7 0xf04>;
225 };
226
227 clocks {
228 xo_board: xo_board {
229 compatible = "fixed-clock";
230 #clock-cells = <0>;
231 clock-frequency = <19200000>;
232 };
233
234 sleep_clk: sleep_clk {
235 compatible = "fixed-clock";
236 #clock-cells = <0>;
237 clock-frequency = <32768>;
238 };
239 };
240
241 timer {
242 compatible = "arm,armv7-timer";
243 interrupts = <GIC_PPI 2 0xf08>,
244 <GIC_PPI 3 0xf08>,
245 <GIC_PPI 4 0xf08>,
246 <GIC_PPI 1 0xf08>;
247 clock-frequency = <19200000>;
248 };
249
250 adsp-pil {
251 compatible = "qcom,msm8974-adsp-pil";
252
253 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
254 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
255 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
256 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
257 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
258 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
259
260 cx-supply = <&pm8841_s2>;
261
262 clocks = <&xo_board>;
263 clock-names = "xo";
264
265 memory-region = <&adsp_region>;
266
267 qcom,smem-states = <&adsp_smp2p_out 0>;
268 qcom,smem-state-names = "stop";
269 };
270
271 smem {
272 compatible = "qcom,smem";
273
274 memory-region = <&smem_region>;
275 qcom,rpm-msg-ram = <&rpm_msg_ram>;
276
277 hwlocks = <&tcsr_mutex 3>;
278 };
279
280 smp2p-adsp {
281 compatible = "qcom,smp2p";
282 qcom,smem = <443>, <429>;
283
284 interrupt-parent = <&intc>;
285 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
286
287 qcom,ipc = <&apcs 8 10>;
288
289 qcom,local-pid = <0>;
290 qcom,remote-pid = <2>;
291
292 adsp_smp2p_out: master-kernel {
293 qcom,entry-name = "master-kernel";
294 #qcom,smem-state-cells = <1>;
295 };
296
297 adsp_smp2p_in: slave-kernel {
298 qcom,entry-name = "slave-kernel";
299
300 interrupt-controller;
301 #interrupt-cells = <2>;
302 };
303 };
304
305 smp2p-modem {
306 compatible = "qcom,smp2p";
307 qcom,smem = <435>, <428>;
308
309 interrupt-parent = <&intc>;
310 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
311
312 qcom,ipc = <&apcs 8 14>;
313
314 qcom,local-pid = <0>;
315 qcom,remote-pid = <1>;
316
317 modem_smp2p_out: master-kernel {
318 qcom,entry-name = "master-kernel";
319 #qcom,smem-state-cells = <1>;
320 };
321
322 modem_smp2p_in: slave-kernel {
323 qcom,entry-name = "slave-kernel";
324
325 interrupt-controller;
326 #interrupt-cells = <2>;
327 };
328 };
329
330 smp2p-wcnss {
331 compatible = "qcom,smp2p";
332 qcom,smem = <451>, <431>;
333
334 interrupt-parent = <&intc>;
335 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
336
337 qcom,ipc = <&apcs 8 18>;
338
339 qcom,local-pid = <0>;
340 qcom,remote-pid = <4>;
341
342 wcnss_smp2p_out: master-kernel {
343 qcom,entry-name = "master-kernel";
344
345 #qcom,smem-state-cells = <1>;
346 };
347
348 wcnss_smp2p_in: slave-kernel {
349 qcom,entry-name = "slave-kernel";
350
351 interrupt-controller;
352 #interrupt-cells = <2>;
353 };
354 };
355
356 smsm {
357 compatible = "qcom,smsm";
358
359 #address-cells = <1>;
360 #size-cells = <0>;
361
362 qcom,ipc-1 = <&apcs 8 13>;
363 qcom,ipc-2 = <&apcs 8 9>;
364 qcom,ipc-3 = <&apcs 8 19>;
365
366 apps_smsm: apps@0 {
367 reg = <0>;
368
369 #qcom,smem-state-cells = <1>;
370 };
371
372 modem_smsm: modem@1 {
373 reg = <1>;
374 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
375
376 interrupt-controller;
377 #interrupt-cells = <2>;
378 };
379
380 adsp_smsm: adsp@2 {
381 reg = <2>;
382 interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
383
384 interrupt-controller;
385 #interrupt-cells = <2>;
386 };
387
388 wcnss_smsm: wcnss@7 {
389 reg = <7>;
390 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
391
392 interrupt-controller;
393 #interrupt-cells = <2>;
394 };
395 };
396
397 firmware {
398 scm {
399 compatible = "qcom,scm";
400 clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
401 clock-names = "core", "bus", "iface";
402 };
403 };
404
405 soc: soc {
406 #address-cells = <1>;
407 #size-cells = <1>;
408 ranges;
409 compatible = "simple-bus";
410
411 intc: interrupt-controller@f9000000 {
412 compatible = "qcom,msm-qgic2";
413 interrupt-controller;
414 #interrupt-cells = <3>;
415 reg = <0xf9000000 0x1000>,
416 <0xf9002000 0x1000>;
417 };
418
419 apcs: syscon@f9011000 {
420 compatible = "syscon";
421 reg = <0xf9011000 0x1000>;
422 };
423
424 qfprom: qfprom@fc4bc000 {
425 #address-cells = <1>;
426 #size-cells = <1>;
427 compatible = "qcom,qfprom";
428 reg = <0xfc4bc000 0x1000>;
429 tsens_calib: calib@d0 {
430 reg = <0xd0 0x18>;
431 };
432 tsens_backup: backup@440 {
433 reg = <0x440 0x10>;
434 };
435 };
436
437 tsens: thermal-sensor@fc4a9000 {
438 compatible = "qcom,msm8974-tsens";
439 reg = <0xfc4a9000 0x1000>, /* TM */
440 <0xfc4a8000 0x1000>; /* SROT */
441 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
442 nvmem-cell-names = "calib", "calib_backup";
443 #qcom,sensors = <11>;
444 #thermal-sensor-cells = <1>;
445 };
446
447 timer@f9020000 {
448 #address-cells = <1>;
449 #size-cells = <1>;
450 ranges;
451 compatible = "arm,armv7-timer-mem";
452 reg = <0xf9020000 0x1000>;
453 clock-frequency = <19200000>;
454
455 frame@f9021000 {
456 frame-number = <0>;
457 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
458 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
459 reg = <0xf9021000 0x1000>,
460 <0xf9022000 0x1000>;
461 };
462
463 frame@f9023000 {
464 frame-number = <1>;
465 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
466 reg = <0xf9023000 0x1000>;
467 status = "disabled";
468 };
469
470 frame@f9024000 {
471 frame-number = <2>;
472 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
473 reg = <0xf9024000 0x1000>;
474 status = "disabled";
475 };
476
477 frame@f9025000 {
478 frame-number = <3>;
479 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
480 reg = <0xf9025000 0x1000>;
481 status = "disabled";
482 };
483
484 frame@f9026000 {
485 frame-number = <4>;
486 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
487 reg = <0xf9026000 0x1000>;
488 status = "disabled";
489 };
490
491 frame@f9027000 {
492 frame-number = <5>;
493 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
494 reg = <0xf9027000 0x1000>;
495 status = "disabled";
496 };
497
498 frame@f9028000 {
499 frame-number = <6>;
500 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
501 reg = <0xf9028000 0x1000>;
502 status = "disabled";
503 };
504 };
505
506 saw0: power-controller@f9089000 {
507 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
508 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
509 };
510
511 saw1: power-controller@f9099000 {
512 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
513 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
514 };
515
516 saw2: power-controller@f90a9000 {
517 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
518 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
519 };
520
521 saw3: power-controller@f90b9000 {
522 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
523 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
524 };
525
526 saw_l2: power-controller@f9012000 {
527 compatible = "qcom,saw2";
528 reg = <0xf9012000 0x1000>;
529 regulator;
530 };
531
532 acc0: clock-controller@f9088000 {
533 compatible = "qcom,kpss-acc-v2";
534 reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
535 };
536
537 acc1: clock-controller@f9098000 {
538 compatible = "qcom,kpss-acc-v2";
539 reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
540 };
541
542 acc2: clock-controller@f90a8000 {
543 compatible = "qcom,kpss-acc-v2";
544 reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
545 };
546
547 acc3: clock-controller@f90b8000 {
548 compatible = "qcom,kpss-acc-v2";
549 reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
550 };
551
552 restart@fc4ab000 {
553 compatible = "qcom,pshold";
554 reg = <0xfc4ab000 0x4>;
555 };
556
557 gcc: clock-controller@fc400000 {
558 compatible = "qcom,gcc-msm8974";
559 #clock-cells = <1>;
560 #reset-cells = <1>;
561 #power-domain-cells = <1>;
562 reg = <0xfc400000 0x4000>;
563 };
564
565 tcsr: syscon@fd4a0000 {
566 compatible = "syscon";
567 reg = <0xfd4a0000 0x10000>;
568 };
569
570 tcsr_mutex_block: syscon@fd484000 {
571 compatible = "syscon";
572 reg = <0xfd484000 0x2000>;
573 };
574
575 mmcc: clock-controller@fd8c0000 {
576 compatible = "qcom,mmcc-msm8974";
577 #clock-cells = <1>;
578 #reset-cells = <1>;
579 #power-domain-cells = <1>;
580 reg = <0xfd8c0000 0x6000>;
581 };
582
583 tcsr_mutex: tcsr-mutex {
584 compatible = "qcom,tcsr-mutex";
585 syscon = <&tcsr_mutex_block 0 0x80>;
586
587 #hwlock-cells = <1>;
588 };
589
590 rpm_msg_ram: memory@fc428000 {
591 compatible = "qcom,rpm-msg-ram";
592 reg = <0xfc428000 0x4000>;
593 };
594
595 blsp1_uart1: serial@f991d000 {
596 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
597 reg = <0xf991d000 0x1000>;
598 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
599 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
600 clock-names = "core", "iface";
601 status = "disabled";
602 };
603
604 blsp1_uart2: serial@f991e000 {
605 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
606 reg = <0xf991e000 0x1000>;
607 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
608 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
609 clock-names = "core", "iface";
610 status = "disabled";
611 };
612
613 sdhci@f9824900 {
614 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
615 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
616 reg-names = "hc_mem", "core_mem";
617 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
618 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
619 interrupt-names = "hc_irq", "pwr_irq";
620 clocks = <&gcc GCC_SDCC1_APPS_CLK>,
621 <&gcc GCC_SDCC1_AHB_CLK>,
622 <&xo_board>;
623 clock-names = "core", "iface", "xo";
624 status = "disabled";
625 };
626
627 sdhci@f9864900 {
628 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
629 reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
630 reg-names = "hc_mem", "core_mem";
631 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
632 <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
633 interrupt-names = "hc_irq", "pwr_irq";
634 clocks = <&gcc GCC_SDCC3_APPS_CLK>,
635 <&gcc GCC_SDCC3_AHB_CLK>,
636 <&xo_board>;
637 clock-names = "core", "iface", "xo";
638 status = "disabled";
639 };
640
641 sdhci@f98a4900 {
642 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
643 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
644 reg-names = "hc_mem", "core_mem";
645 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
646 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
647 interrupt-names = "hc_irq", "pwr_irq";
648 clocks = <&gcc GCC_SDCC2_APPS_CLK>,
649 <&gcc GCC_SDCC2_AHB_CLK>,
650 <&xo_board>;
651 clock-names = "core", "iface", "xo";
652 status = "disabled";
653 };
654
655 otg: usb@f9a55000 {
656 compatible = "qcom,ci-hdrc";
657 reg = <0xf9a55000 0x200>,
658 <0xf9a55200 0x200>;
659 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
660 clocks = <&gcc GCC_USB_HS_AHB_CLK>,
661 <&gcc GCC_USB_HS_SYSTEM_CLK>;
662 clock-names = "iface", "core";
663 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
664 assigned-clock-rates = <75000000>;
665 resets = <&gcc GCC_USB_HS_BCR>;
666 reset-names = "core";
667 phy_type = "ulpi";
668 dr_mode = "otg";
669 ahb-burst-config = <0>;
670 phy-names = "usb-phy";
671 status = "disabled";
672 #reset-cells = <1>;
673
674 ulpi {
675 usb_hs1_phy: phy@a {
676 compatible = "qcom,usb-hs-phy-msm8974",
677 "qcom,usb-hs-phy";
678 #phy-cells = <0>;
679 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
680 clock-names = "ref", "sleep";
681 resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
682 reset-names = "phy", "por";
683 status = "disabled";
684 };
685
686 usb_hs2_phy: phy@b {
687 compatible = "qcom,usb-hs-phy-msm8974",
688 "qcom,usb-hs-phy";
689 #phy-cells = <0>;
690 clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
691 clock-names = "ref", "sleep";
692 resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
693 reset-names = "phy", "por";
694 status = "disabled";
695 };
696 };
697 };
698
699 rng@f9bff000 {
700 compatible = "qcom,prng";
701 reg = <0xf9bff000 0x200>;
702 clocks = <&gcc GCC_PRNG_AHB_CLK>;
703 clock-names = "core";
704 };
705
706 msmgpio: pinctrl@fd510000 {
707 compatible = "qcom,msm8974-pinctrl";
708 reg = <0xfd510000 0x4000>;
709 gpio-controller;
710 #gpio-cells = <2>;
711 interrupt-controller;
712 #interrupt-cells = <2>;
713 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
714 };
715
716 i2c@f9923000 {
717 status = "disabled";
718 compatible = "qcom,i2c-qup-v2.1.1";
719 reg = <0xf9923000 0x1000>;
720 interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
721 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
722 clock-names = "core", "iface";
723 #address-cells = <1>;
724 #size-cells = <0>;
725 };
726
727 i2c@f9924000 {
728 status = "disabled";
729 compatible = "qcom,i2c-qup-v2.1.1";
730 reg = <0xf9924000 0x1000>;
731 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
732 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
733 clock-names = "core", "iface";
734 #address-cells = <1>;
735 #size-cells = <0>;
736 };
737
738 blsp_i2c3: i2c@f9925000 {
739 status = "disabled";
740 compatible = "qcom,i2c-qup-v2.1.1";
741 reg = <0xf9925000 0x1000>;
742 interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
743 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
744 clock-names = "core", "iface";
745 #address-cells = <1>;
746 #size-cells = <0>;
747 };
748
749 blsp_i2c8: i2c@f9964000 {
750 status = "disabled";
751 compatible = "qcom,i2c-qup-v2.1.1";
752 reg = <0xf9964000 0x1000>;
753 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
754 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
755 clock-names = "core", "iface";
756 #address-cells = <1>;
757 #size-cells = <0>;
758 };
759
760 blsp_i2c11: i2c@f9967000 {
761 status = "disabled";
762 compatible = "qcom,i2c-qup-v2.1.1";
763 reg = <0xf9967000 0x1000>;
764 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
765 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
766 clock-names = "core", "iface";
767 #address-cells = <1>;
768 #size-cells = <0>;
769 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
770 dma-names = "tx", "rx";
771 };
772
773 blsp_i2c12: i2c@f9968000 {
774 status = "disabled";
775 compatible = "qcom,i2c-qup-v2.1.1";
776 reg = <0xf9968000 0x1000>;
777 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
778 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
779 clock-names = "core", "iface";
780 #address-cells = <1>;
781 #size-cells = <0>;
782 };
783
784 spmi_bus: spmi@fc4cf000 {
785 compatible = "qcom,spmi-pmic-arb";
786 reg-names = "core", "intr", "cnfg";
787 reg = <0xfc4cf000 0x1000>,
788 <0xfc4cb000 0x1000>,
789 <0xfc4ca000 0x1000>;
790 interrupt-names = "periph_irq";
791 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
792 qcom,ee = <0>;
793 qcom,channel = <0>;
794 #address-cells = <2>;
795 #size-cells = <0>;
796 interrupt-controller;
797 #interrupt-cells = <4>;
798 };
799
800 blsp2_dma: dma-controller@f9944000 {
801 compatible = "qcom,bam-v1.4.0";
802 reg = <0xf9944000 0x19000>;
803 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
804 clocks = <&gcc GCC_BLSP2_AHB_CLK>;
805 clock-names = "bam_clk";
806 #dma-cells = <1>;
807 qcom,ee = <0>;
808 };
809
810 etr@fc322000 {
811 compatible = "arm,coresight-tmc", "arm,primecell";
812 reg = <0xfc322000 0x1000>;
813
814 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
815 clock-names = "apb_pclk", "atclk";
816
817 in-ports {
818 port {
819 etr_in: endpoint {
820 remote-endpoint = <&replicator_out0>;
821 };
822 };
823 };
824 };
825
826 tpiu@fc318000 {
827 compatible = "arm,coresight-tpiu", "arm,primecell";
828 reg = <0xfc318000 0x1000>;
829
830 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
831 clock-names = "apb_pclk", "atclk";
832
833 in-ports {
834 port {
835 tpiu_in: endpoint {
836 remote-endpoint = <&replicator_out1>;
837 };
838 };
839 };
840 };
841
842 replicator@fc31c000 {
843 compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
844 reg = <0xfc31c000 0x1000>;
845
846 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
847 clock-names = "apb_pclk", "atclk";
848
849 out-ports {
850 #address-cells = <1>;
851 #size-cells = <0>;
852
853 port@0 {
854 reg = <0>;
855 replicator_out0: endpoint {
856 remote-endpoint = <&etr_in>;
857 };
858 };
859 port@1 {
860 reg = <1>;
861 replicator_out1: endpoint {
862 remote-endpoint = <&tpiu_in>;
863 };
864 };
865 };
866
867 in-ports {
868 port {
869 replicator_in: endpoint {
870 remote-endpoint = <&etf_out>;
871 };
872 };
873 };
874 };
875
876 etf@fc307000 {
877 compatible = "arm,coresight-tmc", "arm,primecell";
878 reg = <0xfc307000 0x1000>;
879
880 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
881 clock-names = "apb_pclk", "atclk";
882
883 out-ports {
884 port {
885 etf_out: endpoint {
886 remote-endpoint = <&replicator_in>;
887 };
888 };
889 };
890
891 in-ports {
892 port {
893 etf_in: endpoint {
894 remote-endpoint = <&merger_out>;
895 };
896 };
897 };
898 };
899
900 funnel@fc31b000 {
901 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
902 reg = <0xfc31b000 0x1000>;
903
904 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
905 clock-names = "apb_pclk", "atclk";
906
907 in-ports {
908 #address-cells = <1>;
909 #size-cells = <0>;
910
911 /*
912 * Not described input ports:
913 * 0 - connected trought funnel to Audio, Modem and
914 * Resource and Power Manager CPU's
915 * 2...7 - not-connected
916 */
917 port@1 {
918 reg = <1>;
919 merger_in1: endpoint {
920 remote-endpoint = <&funnel1_out>;
921 };
922 };
923 };
924
925 out-ports {
926 port {
927 merger_out: endpoint {
928 remote-endpoint = <&etf_in>;
929 };
930 };
931 };
932 };
933
934 funnel@fc31a000 {
935 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
936 reg = <0xfc31a000 0x1000>;
937
938 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
939 clock-names = "apb_pclk", "atclk";
940
941 in-ports {
942 #address-cells = <1>;
943 #size-cells = <0>;
944
945 /*
946 * Not described input ports:
947 * 0 - not-connected
948 * 1 - connected trought funnel to Multimedia CPU
949 * 2 - connected to Wireless CPU
950 * 3 - not-connected
951 * 4 - not-connected
952 * 6 - not-connected
953 * 7 - connected to STM
954 */
955 port@5 {
956 reg = <5>;
957 funnel1_in5: endpoint {
958 remote-endpoint = <&kpss_out>;
959 };
960 };
961 };
962
963 out-ports {
964 port {
965 funnel1_out: endpoint {
966 remote-endpoint = <&merger_in1>;
967 };
968 };
969 };
970 };
971
972 funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
973 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
974 reg = <0xfc345000 0x1000>;
975
976 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
977 clock-names = "apb_pclk", "atclk";
978
979 in-ports {
980 #address-cells = <1>;
981 #size-cells = <0>;
982
983 port@0 {
984 reg = <0>;
985 kpss_in0: endpoint {
986 remote-endpoint = <&etm0_out>;
987 };
988 };
989 port@1 {
990 reg = <1>;
991 kpss_in1: endpoint {
992 remote-endpoint = <&etm1_out>;
993 };
994 };
995 port@2 {
996 reg = <2>;
997 kpss_in2: endpoint {
998 remote-endpoint = <&etm2_out>;
999 };
1000 };
1001 port@3 {
1002 reg = <3>;
1003 kpss_in3: endpoint {
1004 remote-endpoint = <&etm3_out>;
1005 };
1006 };
1007 };
1008
1009 out-ports {
1010 port {
1011 kpss_out: endpoint {
1012 remote-endpoint = <&funnel1_in5>;
1013 };
1014 };
1015 };
1016 };
1017
1018 etm@fc33c000 {
1019 compatible = "arm,coresight-etm4x", "arm,primecell";
1020 reg = <0xfc33c000 0x1000>;
1021
1022 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1023 clock-names = "apb_pclk", "atclk";
1024
1025 cpu = <&CPU0>;
1026
1027 out-ports {
1028 port {
1029 etm0_out: endpoint {
1030 remote-endpoint = <&kpss_in0>;
1031 };
1032 };
1033 };
1034 };
1035
1036 etm@fc33d000 {
1037 compatible = "arm,coresight-etm4x", "arm,primecell";
1038 reg = <0xfc33d000 0x1000>;
1039
1040 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1041 clock-names = "apb_pclk", "atclk";
1042
1043 cpu = <&CPU1>;
1044
1045 out-ports {
1046 port {
1047 etm1_out: endpoint {
1048 remote-endpoint = <&kpss_in1>;
1049 };
1050 };
1051 };
1052 };
1053
1054 etm@fc33e000 {
1055 compatible = "arm,coresight-etm4x", "arm,primecell";
1056 reg = <0xfc33e000 0x1000>;
1057
1058 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1059 clock-names = "apb_pclk", "atclk";
1060
1061 cpu = <&CPU2>;
1062
1063 out-ports {
1064 port {
1065 etm2_out: endpoint {
1066 remote-endpoint = <&kpss_in2>;
1067 };
1068 };
1069 };
1070 };
1071
1072 etm@fc33f000 {
1073 compatible = "arm,coresight-etm4x", "arm,primecell";
1074 reg = <0xfc33f000 0x1000>;
1075
1076 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1077 clock-names = "apb_pclk", "atclk";
1078
1079 cpu = <&CPU3>;
1080
1081 out-ports {
1082 port {
1083 etm3_out: endpoint {
1084 remote-endpoint = <&kpss_in3>;
1085 };
1086 };
1087 };
1088 };
1089
1090 mdss: mdss@fd900000 {
1091 status = "disabled";
1092
1093 compatible = "qcom,mdss";
1094 reg = <0xfd900000 0x100>,
1095 <0xfd924000 0x1000>;
1096 reg-names = "mdss_phys",
1097 "vbif_phys";
1098
1099 power-domains = <&mmcc MDSS_GDSC>;
1100
1101 clocks = <&mmcc MDSS_AHB_CLK>,
1102 <&mmcc MDSS_AXI_CLK>,
1103 <&mmcc MDSS_VSYNC_CLK>;
1104 clock-names = "iface",
1105 "bus",
1106 "vsync";
1107
1108 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1109
1110 interrupt-controller;
1111 #interrupt-cells = <1>;
1112
1113 #address-cells = <1>;
1114 #size-cells = <1>;
1115 ranges;
1116
1117 mdp: mdp@fd900000 {
1118 status = "disabled";
1119
1120 compatible = "qcom,mdp5";
1121 reg = <0xfd900100 0x22000>;
1122 reg-names = "mdp_phys";
1123
1124 interrupt-parent = <&mdss>;
1125 interrupts = <0 0>;
1126
1127 clocks = <&mmcc MDSS_AHB_CLK>,
1128 <&mmcc MDSS_AXI_CLK>,
1129 <&mmcc MDSS_MDP_CLK>,
1130 <&mmcc MDSS_VSYNC_CLK>;
1131 clock-names = "iface",
1132 "bus",
1133 "core",
1134 "vsync";
1135
1136 ports {
1137 #address-cells = <1>;
1138 #size-cells = <0>;
1139
1140 port@0 {
1141 reg = <0>;
1142 mdp5_intf1_out: endpoint {
1143 remote-endpoint = <&dsi0_in>;
1144 };
1145 };
1146 };
1147 };
1148
1149 dsi0: dsi@fd922800 {
1150 status = "disabled";
1151
1152 compatible = "qcom,mdss-dsi-ctrl";
1153 reg = <0xfd922800 0x1f8>;
1154 reg-names = "dsi_ctrl";
1155
1156 interrupt-parent = <&mdss>;
1157 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
1158
1159 assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
1160 <&mmcc PCLK0_CLK_SRC>;
1161 assigned-clock-parents = <&dsi_phy0 0>,
1162 <&dsi_phy0 1>;
1163
1164 clocks = <&mmcc MDSS_MDP_CLK>,
1165 <&mmcc MDSS_AHB_CLK>,
1166 <&mmcc MDSS_AXI_CLK>,
1167 <&mmcc MDSS_BYTE0_CLK>,
1168 <&mmcc MDSS_PCLK0_CLK>,
1169 <&mmcc MDSS_ESC0_CLK>,
1170 <&mmcc MMSS_MISC_AHB_CLK>;
1171 clock-names = "mdp_core",
1172 "iface",
1173 "bus",
1174 "byte",
1175 "pixel",
1176 "core",
1177 "core_mmss";
1178
1179 phys = <&dsi_phy0>;
1180 phy-names = "dsi-phy";
1181
1182 ports {
1183 #address-cells = <1>;
1184 #size-cells = <0>;
1185
1186 port@0 {
1187 reg = <0>;
1188 dsi0_in: endpoint {
1189 remote-endpoint = <&mdp5_intf1_out>;
1190 };
1191 };
1192
1193 port@1 {
1194 reg = <1>;
1195 dsi0_out: endpoint {
1196 };
1197 };
1198 };
1199 };
1200
1201 dsi_phy0: dsi-phy@fd922a00 {
1202 status = "disabled";
1203
1204 compatible = "qcom,dsi-phy-28nm-hpm";
1205 reg = <0xfd922a00 0xd4>,
1206 <0xfd922b00 0x280>,
1207 <0xfd922d80 0x30>;
1208 reg-names = "dsi_pll",
1209 "dsi_phy",
1210 "dsi_phy_regulator";
1211
1212 #clock-cells = <1>;
1213 #phy-cells = <0>;
1214 qcom,dsi-phy-index = <0>;
1215
1216 clocks = <&mmcc MDSS_AHB_CLK>;
1217 clock-names = "iface";
1218 };
1219 };
1220 };
1221
1222 smd {
1223 compatible = "qcom,smd";
1224
1225 adsp {
1226 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
1227
1228 qcom,ipc = <&apcs 8 8>;
1229 qcom,smd-edge = <1>;
1230 };
1231
1232 modem {
1233 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
1234
1235 qcom,ipc = <&apcs 8 12>;
1236 qcom,smd-edge = <0>;
1237 };
1238
1239 rpm {
1240 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1241 qcom,ipc = <&apcs 8 0>;
1242 qcom,smd-edge = <15>;
1243
1244 rpm_requests {
1245 compatible = "qcom,rpm-msm8974";
1246 qcom,smd-channels = "rpm_requests";
1247
1248 rpmcc: clock-controller {
1249 compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1250 #clock-cells = <1>;
1251 };
1252
1253 pm8841-regulators {
1254 compatible = "qcom,rpm-pm8841-regulators";
1255
1256 pm8841_s1: s1 {};
1257 pm8841_s2: s2 {};
1258 pm8841_s3: s3 {};
1259 pm8841_s4: s4 {};
1260 pm8841_s5: s5 {};
1261 pm8841_s6: s6 {};
1262 pm8841_s7: s7 {};
1263 pm8841_s8: s8 {};
1264 };
1265
1266 pm8941-regulators {
1267 compatible = "qcom,rpm-pm8941-regulators";
1268
1269 pm8941_s1: s1 {};
1270 pm8941_s2: s2 {};
1271 pm8941_s3: s3 {};
1272
1273 pm8941_l1: l1 {};
1274 pm8941_l2: l2 {};
1275 pm8941_l3: l3 {};
1276 pm8941_l4: l4 {};
1277 pm8941_l5: l5 {};
1278 pm8941_l6: l6 {};
1279 pm8941_l7: l7 {};
1280 pm8941_l8: l8 {};
1281 pm8941_l9: l9 {};
1282 pm8941_l10: l10 {};
1283 pm8941_l11: l11 {};
1284 pm8941_l12: l12 {};
1285 pm8941_l13: l13 {};
1286 pm8941_l14: l14 {};
1287 pm8941_l15: l15 {};
1288 pm8941_l16: l16 {};
1289 pm8941_l17: l17 {};
1290 pm8941_l18: l18 {};
1291 pm8941_l19: l19 {};
1292 pm8941_l20: l20 {};
1293 pm8941_l21: l21 {};
1294 pm8941_l22: l22 {};
1295 pm8941_l23: l23 {};
1296 pm8941_l24: l24 {};
1297
1298 pm8941_lvs1: lvs1 {};
1299 pm8941_lvs2: lvs2 {};
1300 pm8941_lvs3: lvs3 {};
1301 };
1302 };
1303 };
1304 };
1305
1306 vreg_boost: vreg-boost {
1307 compatible = "regulator-fixed";
1308
1309 regulator-name = "vreg-boost";
1310 regulator-min-microvolt = <3150000>;
1311 regulator-max-microvolt = <3150000>;
1312
1313 regulator-always-on;
1314 regulator-boot-on;
1315
1316 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1317 enable-active-high;
1318
1319 pinctrl-names = "default";
1320 pinctrl-0 = <&boost_bypass_n_pin>;
1321 };
1322 vreg_vph_pwr: vreg-vph-pwr {
1323 compatible = "regulator-fixed";
1324 regulator-name = "vph-pwr";
1325
1326 regulator-min-microvolt = <3600000>;
1327 regulator-max-microvolt = <3600000>;
1328
1329 regulator-always-on;
1330 };
1331};