Loading...
1/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
2/******************************************************************************
3 *
4 * Name: acconfig.h - Global configuration constants
5 *
6 * Copyright (C) 2000 - 2021, Intel Corp.
7 *
8 *****************************************************************************/
9
10#ifndef _ACCONFIG_H
11#define _ACCONFIG_H
12
13/******************************************************************************
14 *
15 * Configuration options
16 *
17 *****************************************************************************/
18
19/*
20 * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the
21 * ACPI subsystem. This includes the DEBUG_PRINT output
22 * statements. When disabled, all DEBUG_PRINT
23 * statements are compiled out.
24 *
25 * ACPI_APPLICATION - Use this switch if the subsystem is going to be run
26 * at the application level.
27 *
28 */
29
30/*
31 * OS name, used for the _OS object. The _OS object is essentially obsolete,
32 * but there is a large base of ASL/AML code in existing machines that check
33 * for the string below. The use of this string usually guarantees that
34 * the ASL will execute down the most tested code path. Also, there is some
35 * code that will not execute the _OSI method unless _OS matches the string
36 * below. Therefore, change this string at your own risk.
37 */
38#define ACPI_OS_NAME "Microsoft Windows NT"
39
40/* Maximum objects in the various object caches */
41
42#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */
43#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */
44#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */
45#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */
46#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */
47#define ACPI_MAX_COMMENT_CACHE_DEPTH 96 /* Comments for the -ca option */
48
49/*
50 * Should the subsystem abort the loading of an ACPI table if the
51 * table checksum is incorrect?
52 */
53#ifndef ACPI_CHECKSUM_ABORT
54#define ACPI_CHECKSUM_ABORT FALSE
55#endif
56
57/*
58 * Generate a version of ACPICA that only supports "reduced hardware"
59 * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
60 * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
61 * model. In other words, no ACPI hardware is supported.
62 *
63 * If TRUE, this means no support for the following:
64 * PM Event and Control registers
65 * SCI interrupt (and handler)
66 * Fixed Events
67 * General Purpose Events (GPEs)
68 * Global Lock
69 * ACPI PM timer
70 * FACS table (Waking vectors and Global Lock)
71 */
72#ifndef ACPI_REDUCED_HARDWARE
73#define ACPI_REDUCED_HARDWARE FALSE
74#endif
75
76/******************************************************************************
77 *
78 * Subsystem Constants
79 *
80 *****************************************************************************/
81
82/* Version of ACPI supported */
83
84#define ACPI_CA_SUPPORT_LEVEL 5
85
86/* Maximum count for a semaphore object */
87
88#define ACPI_MAX_SEMAPHORE_COUNT 256
89
90/* Maximum object reference count (detects object deletion issues) */
91
92#define ACPI_MAX_REFERENCE_COUNT 0x4000
93
94/* Default page size for use in mapping memory for operation regions */
95
96#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
97
98/* owner_id tracking. 128 entries allows for 4095 owner_ids */
99
100#define ACPI_NUM_OWNERID_MASKS 128
101
102/* Size of the root table array is increased by this increment */
103
104#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4
105
106/* Maximum sleep allowed via Sleep() operator */
107
108#define ACPI_MAX_SLEEP 2000 /* 2000 millisec == two seconds */
109
110/* Address Range lists are per-space_id (Memory and I/O only) */
111
112#define ACPI_ADDRESS_RANGE_MAX 2
113
114/* Maximum time (default 30s) of While() loops before abort */
115
116#define ACPI_MAX_LOOP_TIMEOUT 30
117
118/******************************************************************************
119 *
120 * ACPI Specification constants (Do not change unless the specification changes)
121 *
122 *****************************************************************************/
123
124/* Method info (in WALK_STATE), containing local variables and arguments */
125
126#define ACPI_METHOD_NUM_LOCALS 8
127#define ACPI_METHOD_MAX_LOCAL 7
128
129#define ACPI_METHOD_NUM_ARGS 7
130#define ACPI_METHOD_MAX_ARG 6
131
132/*
133 * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
134 */
135#define ACPI_OBJ_NUM_OPERANDS 8
136#define ACPI_OBJ_MAX_OPERAND 7
137
138/* Number of elements in the Result Stack frame, can be an arbitrary value */
139
140#define ACPI_RESULTS_FRAME_OBJ_NUM 8
141
142/*
143 * Maximal number of elements the Result Stack can contain,
144 * it may be an arbitrary value not exceeding the types of
145 * result_size and result_count (now u8).
146 */
147#define ACPI_RESULTS_OBJ_NUM_MAX 255
148
149/* Constants used in searching for the RSDP in low memory */
150
151#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */
152#define ACPI_EBDA_PTR_LENGTH 2
153#define ACPI_EBDA_WINDOW_SIZE 1024
154#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */
155#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000
156#define ACPI_RSDP_SCAN_STEP 16
157
158/* Operation regions */
159
160#define ACPI_USER_REGION_BEGIN 0x80
161
162/* Maximum space_ids for Operation Regions */
163
164#define ACPI_MAX_ADDRESS_SPACE 255
165#define ACPI_NUM_DEFAULT_SPACES 4
166
167/* Array sizes. Used for range checking also */
168
169#define ACPI_MAX_MATCH_OPCODE 5
170
171/* RSDP checksums */
172
173#define ACPI_RSDP_CHECKSUM_LENGTH 20
174#define ACPI_RSDP_XCHECKSUM_LENGTH 36
175
176/*
177 * SMBus, GSBus and IPMI buffer sizes. All have a 2-byte header,
178 * containing both Status and Length.
179 */
180#define ACPI_SERIAL_HEADER_SIZE 2 /* Common for below. Status and Length fields */
181
182#define ACPI_SMBUS_DATA_SIZE 32
183#define ACPI_SMBUS_BUFFER_SIZE ACPI_SERIAL_HEADER_SIZE + ACPI_SMBUS_DATA_SIZE
184
185#define ACPI_IPMI_DATA_SIZE 64
186#define ACPI_IPMI_BUFFER_SIZE ACPI_SERIAL_HEADER_SIZE + ACPI_IPMI_DATA_SIZE
187
188#define ACPI_MAX_GSBUS_DATA_SIZE 255
189#define ACPI_MAX_GSBUS_BUFFER_SIZE ACPI_SERIAL_HEADER_SIZE + ACPI_MAX_GSBUS_DATA_SIZE
190
191#define ACPI_PRM_INPUT_BUFFER_SIZE 26
192
193/* _sx_d and _sx_w control methods */
194
195#define ACPI_NUM_sx_d_METHODS 4
196#define ACPI_NUM_sx_w_METHODS 5
197
198/******************************************************************************
199 *
200 * Miscellaneous constants
201 *
202 *****************************************************************************/
203
204/* UUID constants */
205
206#define UUID_BUFFER_LENGTH 16 /* Length of UUID in memory */
207#define UUID_STRING_LENGTH 36 /* Total length of a UUID string */
208
209/* Positions for required hyphens (dashes) in UUID strings */
210
211#define UUID_HYPHEN1_OFFSET 8
212#define UUID_HYPHEN2_OFFSET 13
213#define UUID_HYPHEN3_OFFSET 18
214#define UUID_HYPHEN4_OFFSET 23
215
216/******************************************************************************
217 *
218 * ACPI AML Debugger
219 *
220 *****************************************************************************/
221
222#define ACPI_DEBUGGER_MAX_ARGS ACPI_METHOD_NUM_ARGS + 4 /* Max command line arguments */
223#define ACPI_DB_LINE_BUFFER_SIZE 512
224
225#define ACPI_DEBUGGER_COMMAND_PROMPT '-'
226#define ACPI_DEBUGGER_EXECUTE_PROMPT '%'
227
228#endif /* _ACCONFIG_H */
1/******************************************************************************
2 *
3 * Name: acconfig.h - Global configuration constants
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#ifndef _ACCONFIG_H
45#define _ACCONFIG_H
46
47/******************************************************************************
48 *
49 * Configuration options
50 *
51 *****************************************************************************/
52
53/*
54 * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the
55 * ACPI subsystem. This includes the DEBUG_PRINT output
56 * statements. When disabled, all DEBUG_PRINT
57 * statements are compiled out.
58 *
59 * ACPI_APPLICATION - Use this switch if the subsystem is going to be run
60 * at the application level.
61 *
62 */
63
64/*
65 * OS name, used for the _OS object. The _OS object is essentially obsolete,
66 * but there is a large base of ASL/AML code in existing machines that check
67 * for the string below. The use of this string usually guarantees that
68 * the ASL will execute down the most tested code path. Also, there is some
69 * code that will not execute the _OSI method unless _OS matches the string
70 * below. Therefore, change this string at your own risk.
71 */
72#define ACPI_OS_NAME "Microsoft Windows NT"
73
74/* Maximum objects in the various object caches */
75
76#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */
77#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */
78#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */
79#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */
80#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */
81
82/*
83 * Should the subsystem abort the loading of an ACPI table if the
84 * table checksum is incorrect?
85 */
86#ifndef ACPI_CHECKSUM_ABORT
87#define ACPI_CHECKSUM_ABORT FALSE
88#endif
89
90/*
91 * Generate a version of ACPICA that only supports "reduced hardware"
92 * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
93 * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
94 * model. In other words, no ACPI hardware is supported.
95 *
96 * If TRUE, this means no support for the following:
97 * PM Event and Control registers
98 * SCI interrupt (and handler)
99 * Fixed Events
100 * General Purpose Events (GPEs)
101 * Global Lock
102 * ACPI PM timer
103 * FACS table (Waking vectors and Global Lock)
104 */
105#ifndef ACPI_REDUCED_HARDWARE
106#define ACPI_REDUCED_HARDWARE FALSE
107#endif
108
109/******************************************************************************
110 *
111 * Subsystem Constants
112 *
113 *****************************************************************************/
114
115/* Version of ACPI supported */
116
117#define ACPI_CA_SUPPORT_LEVEL 5
118
119/* Maximum count for a semaphore object */
120
121#define ACPI_MAX_SEMAPHORE_COUNT 256
122
123/* Maximum object reference count (detects object deletion issues) */
124
125#define ACPI_MAX_REFERENCE_COUNT 0x1000
126
127/* Default page size for use in mapping memory for operation regions */
128
129#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
130
131/* owner_id tracking. 8 entries allows for 255 owner_ids */
132
133#define ACPI_NUM_OWNERID_MASKS 8
134
135/* Size of the root table array is increased by this increment */
136
137#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4
138
139/* Maximum sleep allowed via Sleep() operator */
140
141#define ACPI_MAX_SLEEP 2000 /* 2000 millisec == two seconds */
142
143/* Address Range lists are per-space_id (Memory and I/O only) */
144
145#define ACPI_ADDRESS_RANGE_MAX 2
146
147/******************************************************************************
148 *
149 * ACPI Specification constants (Do not change unless the specification changes)
150 *
151 *****************************************************************************/
152
153/* Method info (in WALK_STATE), containing local variables and argumetns */
154
155#define ACPI_METHOD_NUM_LOCALS 8
156#define ACPI_METHOD_MAX_LOCAL 7
157
158#define ACPI_METHOD_NUM_ARGS 7
159#define ACPI_METHOD_MAX_ARG 6
160
161/*
162 * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
163 */
164#define ACPI_OBJ_NUM_OPERANDS 8
165#define ACPI_OBJ_MAX_OPERAND 7
166
167/* Number of elements in the Result Stack frame, can be an arbitrary value */
168
169#define ACPI_RESULTS_FRAME_OBJ_NUM 8
170
171/*
172 * Maximal number of elements the Result Stack can contain,
173 * it may be an arbitray value not exceeding the types of
174 * result_size and result_count (now u8).
175 */
176#define ACPI_RESULTS_OBJ_NUM_MAX 255
177
178/* Constants used in searching for the RSDP in low memory */
179
180#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */
181#define ACPI_EBDA_PTR_LENGTH 2
182#define ACPI_EBDA_WINDOW_SIZE 1024
183#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */
184#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000
185#define ACPI_RSDP_SCAN_STEP 16
186
187/* Operation regions */
188
189#define ACPI_USER_REGION_BEGIN 0x80
190
191/* Maximum space_ids for Operation Regions */
192
193#define ACPI_MAX_ADDRESS_SPACE 255
194#define ACPI_NUM_DEFAULT_SPACES 4
195
196/* Array sizes. Used for range checking also */
197
198#define ACPI_MAX_MATCH_OPCODE 5
199
200/* RSDP checksums */
201
202#define ACPI_RSDP_CHECKSUM_LENGTH 20
203#define ACPI_RSDP_XCHECKSUM_LENGTH 36
204
205/* SMBus, GSBus and IPMI bidirectional buffer size */
206
207#define ACPI_SMBUS_BUFFER_SIZE 34
208#define ACPI_GSBUS_BUFFER_SIZE 34
209#define ACPI_IPMI_BUFFER_SIZE 66
210
211/* _sx_d and _sx_w control methods */
212
213#define ACPI_NUM_sx_d_METHODS 4
214#define ACPI_NUM_sx_w_METHODS 5
215
216/******************************************************************************
217 *
218 * Miscellaneous constants
219 *
220 *****************************************************************************/
221
222/* UUID constants */
223
224#define UUID_BUFFER_LENGTH 16 /* Length of UUID in memory */
225#define UUID_STRING_LENGTH 36 /* Total length of a UUID string */
226
227/* Positions for required hyphens (dashes) in UUID strings */
228
229#define UUID_HYPHEN1_OFFSET 8
230#define UUID_HYPHEN2_OFFSET 13
231#define UUID_HYPHEN3_OFFSET 18
232#define UUID_HYPHEN4_OFFSET 23
233
234/******************************************************************************
235 *
236 * ACPI AML Debugger
237 *
238 *****************************************************************************/
239
240#define ACPI_DEBUGGER_MAX_ARGS ACPI_METHOD_NUM_ARGS + 4 /* Max command line arguments */
241#define ACPI_DB_LINE_BUFFER_SIZE 512
242
243#define ACPI_DEBUGGER_COMMAND_PROMPT '-'
244#define ACPI_DEBUGGER_EXECUTE_PROMPT '%'
245
246#endif /* _ACCONFIG_H */