Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
4 *
5 * Copyright (C) 2011 Atmel,
6 * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
7 */
8/dts-v1/;
9#include "at91sam9g45.dtsi"
10#include <dt-bindings/pwm/pwm.h>
11
12/ {
13 model = "Atmel AT91SAM9M10G45-EK";
14 compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
15
16 chosen {
17 bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
18 stdout-path = "serial0:115200n8";
19 };
20
21 memory@70000000 {
22 reg = <0x70000000 0x4000000>;
23 };
24
25 clocks {
26 slow_xtal {
27 clock-frequency = <32768>;
28 };
29
30 main_xtal {
31 clock-frequency = <12000000>;
32 };
33 };
34
35 ahb {
36 apb {
37 dbgu: serial@ffffee00 {
38 status = "okay";
39 };
40
41 tcb0: timer@fff7c000 {
42 timer@0 {
43 compatible = "atmel,tcb-timer";
44 reg = <0>, <1>;
45 };
46
47 timer@2 {
48 compatible = "atmel,tcb-timer";
49 reg = <2>;
50 };
51 };
52
53 usart1: serial@fff90000 {
54 pinctrl-0 =
55 <&pinctrl_usart1
56 &pinctrl_usart1_rts
57 &pinctrl_usart1_cts>;
58 status = "okay";
59 };
60
61 macb0: ethernet@fffbc000 {
62 phy-mode = "rmii";
63 status = "okay";
64 };
65
66 i2c0: i2c@fff84000 {
67 status = "okay";
68 ov2640: camera@30 {
69 compatible = "ovti,ov2640";
70 reg = <0x30>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
73 resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
74 pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
75 clocks = <&pmc PMC_TYPE_SYSTEM 9>;
76 clock-names = "xvclk";
77 assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
78 assigned-clock-rates = <25000000>;
79
80 port {
81 ov2640_0: endpoint {
82 remote-endpoint = <&isi_0>;
83 bus-width = <8>;
84 };
85 };
86 };
87 };
88
89 i2c1: i2c@fff88000 {
90 status = "okay";
91 };
92
93 watchdog@fffffd40 {
94 status = "okay";
95 };
96
97 mmc0: mmc@fff80000 {
98 pinctrl-0 = <
99 &pinctrl_board_mmc0
100 &pinctrl_mmc0_slot0_clk_cmd_dat0
101 &pinctrl_mmc0_slot0_dat1_3>;
102 pinctrl-names = "default";
103 status = "okay";
104 slot@0 {
105 reg = <0>;
106 bus-width = <4>;
107 cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
108 };
109 };
110
111 mmc1: mmc@fffd0000 {
112 pinctrl-0 = <
113 &pinctrl_board_mmc1
114 &pinctrl_mmc1_slot0_clk_cmd_dat0
115 &pinctrl_mmc1_slot0_dat1_3>;
116 pinctrl-names = "default";
117 status = "okay";
118 slot@0 {
119 reg = <0>;
120 bus-width = <4>;
121 cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
122 wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
123 };
124 };
125
126 pinctrl@fffff200 {
127 camera_sensor {
128 pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
129 atmel,pins =
130 <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
131 };
132
133 pinctrl_sensor_reset: sensor_reset-0 {
134 atmel,pins =
135 <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
136 };
137
138 pinctrl_sensor_power: sensor_power-0 {
139 atmel,pins =
140 <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
141 };
142 };
143 mmc0 {
144 pinctrl_board_mmc0: mmc0-board {
145 atmel,pins =
146 <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */
147 };
148 };
149
150 mmc1 {
151 pinctrl_board_mmc1: mmc1-board {
152 atmel,pins =
153 <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */
154 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */
155 };
156 };
157
158 pwm0 {
159 pinctrl_pwm_leds: pwm-led {
160 atmel,pins =
161 <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */
162 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */
163 };
164 };
165 };
166
167 spi0: spi@fffa4000{
168 status = "okay";
169 cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
170 mtd_dataflash@0 {
171 compatible = "atmel,at45", "atmel,dataflash";
172 spi-max-frequency = <13000000>;
173 reg = <0>;
174 };
175 };
176
177 usb2: gadget@fff78000 {
178 atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
179 status = "okay";
180 };
181
182 ac97: sound@fffac000 {
183 status = "okay";
184 };
185
186 adc0: adc@fffb0000 {
187 pinctrl-names = "default";
188 pinctrl-0 = <
189 &pinctrl_adc0_ad0
190 &pinctrl_adc0_ad1
191 &pinctrl_adc0_ad2
192 &pinctrl_adc0_ad3
193 &pinctrl_adc0_ad4
194 &pinctrl_adc0_ad5
195 &pinctrl_adc0_ad6
196 &pinctrl_adc0_ad7>;
197 atmel,adc-ts-wires = <4>;
198 status = "okay";
199 };
200
201 isi@fffb4000 {
202 pinctrl-names = "default";
203 pinctrl-0 = <&pinctrl_isi_data_0_7>;
204 status = "okay";
205 port {
206 isi_0: endpoint {
207 remote-endpoint = <&ov2640_0>;
208 bus-width = <8>;
209 vsync-active = <1>;
210 hsync-active = <1>;
211 };
212 };
213 };
214
215 pwm0: pwm@fffb8000 {
216 status = "okay";
217
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_pwm_leds>;
220 };
221
222 rtc@fffffd20 {
223 atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
224 status = "okay";
225 };
226
227 gpbr: syscon@fffffd60 {
228 status = "okay";
229 };
230
231 rtc@fffffdb0 {
232 status = "okay";
233 };
234 };
235
236 fb0: fb@500000 {
237 display = <&display0>;
238 status = "okay";
239
240 display0: panel {
241 bits-per-pixel = <32>;
242 atmel,lcdcon-backlight;
243 atmel,dmacon = <0x1>;
244 atmel,lcdcon2 = <0x80008002>;
245 atmel,guard-time = <9>;
246 atmel,lcd-wiring-mode = "RGB";
247
248 display-timings {
249 native-mode = <&timing0>;
250 timing0: timing0 {
251 clock-frequency = <9000000>;
252 hactive = <480>;
253 vactive = <272>;
254 hback-porch = <1>;
255 hfront-porch = <1>;
256 vback-porch = <40>;
257 vfront-porch = <1>;
258 hsync-len = <45>;
259 vsync-len = <1>;
260 };
261 };
262 };
263 };
264
265 ebi: ebi@10000000 {
266 status = "okay";
267
268 nand_controller: nand-controller {
269 status = "okay";
270 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
271 pinctrl-names = "default";
272
273 nand@3 {
274 reg = <0x3 0x0 0x800000>;
275 rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
276 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
277 nand-bus-width = <8>;
278 nand-ecc-mode = "soft";
279 nand-on-flash-bbt;
280 label = "atmel_nand";
281
282 partitions {
283 compatible = "fixed-partitions";
284 #address-cells = <1>;
285 #size-cells = <1>;
286
287 boot@0 {
288 label = "bootstrap/uboot/kernel";
289 reg = <0x0 0x400000>;
290 };
291
292 rootfs@400000 {
293 label = "rootfs";
294 reg = <0x400000 0x3C00000>;
295 };
296
297 data@4000000 {
298 label = "data";
299 reg = <0x4000000 0xC000000>;
300 };
301 };
302 };
303 };
304 };
305
306 usb0: ohci@700000 {
307 status = "okay";
308 num-ports = <2>;
309 atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
310 &pioD 3 GPIO_ACTIVE_LOW>;
311 };
312
313 usb1: ehci@800000 {
314 status = "okay";
315 };
316 };
317
318 led-controller-1 {
319 compatible = "gpio-leds";
320
321 led-1 {
322 label = "d8";
323 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
324 linux,default-trigger = "heartbeat";
325 };
326 };
327
328 led-controller-2 {
329 compatible = "pwm-leds";
330
331 led-2 {
332 label = "d6";
333 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
334 max-brightness = <255>;
335 linux,default-trigger = "nand-disk";
336 };
337
338 led-3 {
339 label = "d7";
340 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
341 max-brightness = <255>;
342 linux,default-trigger = "mmc0";
343 };
344 };
345
346 gpio_keys {
347 compatible = "gpio-keys";
348
349 left_click {
350 label = "left_click";
351 gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
352 linux,code = <272>;
353 wakeup-source;
354 };
355
356 right_click {
357 label = "right_click";
358 gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
359 linux,code = <273>;
360 wakeup-source;
361 };
362
363 left {
364 label = "Joystick Left";
365 gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
366 linux,code = <105>;
367 };
368
369 right {
370 label = "Joystick Right";
371 gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
372 linux,code = <106>;
373 };
374
375 up {
376 label = "Joystick Up";
377 gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
378 linux,code = <103>;
379 };
380
381 down {
382 label = "Joystick Down";
383 gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
384 linux,code = <108>;
385 };
386
387 enter {
388 label = "Joystick Press";
389 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
390 linux,code = <28>;
391 };
392 };
393};
1/*
2 * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
3 *
4 * Copyright (C) 2011 Atmel,
5 * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9/dts-v1/;
10#include "at91sam9g45.dtsi"
11#include <dt-bindings/pwm/pwm.h>
12
13/ {
14 model = "Atmel AT91SAM9M10G45-EK";
15 compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
16
17 chosen {
18 bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
19 stdout-path = "serial0:115200n8";
20 };
21
22 memory {
23 reg = <0x70000000 0x4000000>;
24 };
25
26 clocks {
27 slow_xtal {
28 clock-frequency = <32768>;
29 };
30
31 main_xtal {
32 clock-frequency = <12000000>;
33 };
34 };
35
36 ahb {
37 apb {
38 dbgu: serial@ffffee00 {
39 status = "okay";
40 };
41
42 usart1: serial@fff90000 {
43 pinctrl-0 =
44 <&pinctrl_usart1
45 &pinctrl_usart1_rts
46 &pinctrl_usart1_cts>;
47 status = "okay";
48 };
49
50 macb0: ethernet@fffbc000 {
51 phy-mode = "rmii";
52 status = "okay";
53 };
54
55 i2c0: i2c@fff84000 {
56 status = "okay";
57 ov2640: camera@30 {
58 compatible = "ovti,ov2640";
59 reg = <0x30>;
60 pinctrl-names = "default";
61 pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
62 resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
63 pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
64 clocks = <&pck1>;
65 clock-names = "xvclk";
66 assigned-clocks = <&pck1>;
67 assigned-clock-rates = <25000000>;
68
69 port {
70 ov2640_0: endpoint {
71 remote-endpoint = <&isi_0>;
72 bus-width = <8>;
73 };
74 };
75 };
76 };
77
78 i2c1: i2c@fff88000 {
79 status = "okay";
80 };
81
82 watchdog@fffffd40 {
83 status = "okay";
84 };
85
86 mmc0: mmc@fff80000 {
87 pinctrl-0 = <
88 &pinctrl_board_mmc0
89 &pinctrl_mmc0_slot0_clk_cmd_dat0
90 &pinctrl_mmc0_slot0_dat1_3>;
91 status = "okay";
92 slot@0 {
93 reg = <0>;
94 bus-width = <4>;
95 cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
96 };
97 };
98
99 mmc1: mmc@fffd0000 {
100 pinctrl-0 = <
101 &pinctrl_board_mmc1
102 &pinctrl_mmc1_slot0_clk_cmd_dat0
103 &pinctrl_mmc1_slot0_dat1_3>;
104 status = "okay";
105 slot@0 {
106 reg = <0>;
107 bus-width = <4>;
108 cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
109 wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
110 };
111 };
112
113 pinctrl@fffff200 {
114 camera_sensor {
115 pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
116 atmel,pins =
117 <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
118 };
119
120 pinctrl_sensor_reset: sensor_reset-0 {
121 atmel,pins =
122 <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
123 };
124
125 pinctrl_sensor_power: sensor_power-0 {
126 atmel,pins =
127 <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
128 };
129 };
130 mmc0 {
131 pinctrl_board_mmc0: mmc0-board {
132 atmel,pins =
133 <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */
134 };
135 };
136
137 mmc1 {
138 pinctrl_board_mmc1: mmc1-board {
139 atmel,pins =
140 <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */
141 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */
142 };
143 };
144
145 pwm0 {
146 pinctrl_pwm_leds: pwm-led {
147 atmel,pins =
148 <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */
149 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */
150 };
151 };
152 };
153
154 spi0: spi@fffa4000{
155 status = "okay";
156 cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
157 mtd_dataflash@0 {
158 compatible = "atmel,at45", "atmel,dataflash";
159 spi-max-frequency = <13000000>;
160 reg = <0>;
161 };
162 };
163
164 usb2: gadget@fff78000 {
165 atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
166 status = "okay";
167 };
168
169 adc0: adc@fffb0000 {
170 pinctrl-names = "default";
171 pinctrl-0 = <
172 &pinctrl_adc0_ad0
173 &pinctrl_adc0_ad1
174 &pinctrl_adc0_ad2
175 &pinctrl_adc0_ad3
176 &pinctrl_adc0_ad4
177 &pinctrl_adc0_ad5
178 &pinctrl_adc0_ad6
179 &pinctrl_adc0_ad7>;
180 atmel,adc-ts-wires = <4>;
181 status = "okay";
182 };
183
184 isi@fffb4000 {
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_isi_data_0_7>;
187 status = "okay";
188 port {
189 isi_0: endpoint {
190 remote-endpoint = <&ov2640_0>;
191 bus-width = <8>;
192 vsync-active = <1>;
193 hsync-active = <1>;
194 };
195 };
196 };
197
198 pwm0: pwm@fffb8000 {
199 status = "okay";
200
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_pwm_leds>;
203 };
204
205 rtc@fffffd20 {
206 atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
207 status = "okay";
208 };
209
210 gpbr: syscon@fffffd60 {
211 status = "okay";
212 };
213
214 rtc@fffffdb0 {
215 status = "okay";
216 };
217 };
218
219 fb0: fb@0x00500000 {
220 display = <&display0>;
221 status = "okay";
222
223 display0: display {
224 bits-per-pixel = <32>;
225 atmel,lcdcon-backlight;
226 atmel,dmacon = <0x1>;
227 atmel,lcdcon2 = <0x80008002>;
228 atmel,guard-time = <9>;
229 atmel,lcd-wiring-mode = "RGB";
230
231 display-timings {
232 native-mode = <&timing0>;
233 timing0: timing0 {
234 clock-frequency = <9000000>;
235 hactive = <480>;
236 vactive = <272>;
237 hback-porch = <1>;
238 hfront-porch = <1>;
239 vback-porch = <40>;
240 vfront-porch = <1>;
241 hsync-len = <45>;
242 vsync-len = <1>;
243 };
244 };
245 };
246 };
247
248 nand0: nand@40000000 {
249 nand-bus-width = <8>;
250 nand-ecc-mode = "soft";
251 nand-on-flash-bbt;
252 status = "okay";
253
254 boot@0 {
255 label = "bootstrap/uboot/kernel";
256 reg = <0x0 0x400000>;
257 };
258
259 rootfs@400000 {
260 label = "rootfs";
261 reg = <0x400000 0x3C00000>;
262 };
263
264 data@4000000 {
265 label = "data";
266 reg = <0x4000000 0xC000000>;
267 };
268 };
269
270 usb0: ohci@00700000 {
271 status = "okay";
272 num-ports = <2>;
273 atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
274 &pioD 3 GPIO_ACTIVE_LOW>;
275 };
276
277 usb1: ehci@00800000 {
278 status = "okay";
279 };
280 };
281
282 leds {
283 compatible = "gpio-leds";
284
285 d8 {
286 label = "d8";
287 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
288 linux,default-trigger = "heartbeat";
289 };
290 };
291
292 pwmleds {
293 compatible = "pwm-leds";
294
295 d6 {
296 label = "d6";
297 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
298 max-brightness = <255>;
299 linux,default-trigger = "nand-disk";
300 };
301
302 d7 {
303 label = "d7";
304 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
305 max-brightness = <255>;
306 linux,default-trigger = "mmc0";
307 };
308 };
309
310 gpio_keys {
311 compatible = "gpio-keys";
312
313 left_click {
314 label = "left_click";
315 gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
316 linux,code = <272>;
317 wakeup-source;
318 };
319
320 right_click {
321 label = "right_click";
322 gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
323 linux,code = <273>;
324 wakeup-source;
325 };
326
327 left {
328 label = "Joystick Left";
329 gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
330 linux,code = <105>;
331 };
332
333 right {
334 label = "Joystick Right";
335 gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
336 linux,code = <106>;
337 };
338
339 up {
340 label = "Joystick Up";
341 gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
342 linux,code = <103>;
343 };
344
345 down {
346 label = "Joystick Down";
347 gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
348 linux,code = <108>;
349 };
350
351 enter {
352 label = "Joystick Press";
353 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
354 linux,code = <28>;
355 };
356 };
357};