Loading...
Note: File does not exist in v4.17.
1/*
2 * Copyright © 2015 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21 * IN THE SOFTWARE.
22 */
23
24#include <linux/kernel.h>
25
26#include "i915_drv.h"
27#include "intel_display_types.h"
28#include "intel_hotplug.h"
29
30/**
31 * DOC: Hotplug
32 *
33 * Simply put, hotplug occurs when a display is connected to or disconnected
34 * from the system. However, there may be adapters and docking stations and
35 * Display Port short pulses and MST devices involved, complicating matters.
36 *
37 * Hotplug in i915 is handled in many different levels of abstraction.
38 *
39 * The platform dependent interrupt handling code in i915_irq.c enables,
40 * disables, and does preliminary handling of the interrupts. The interrupt
41 * handlers gather the hotplug detect (HPD) information from relevant registers
42 * into a platform independent mask of hotplug pins that have fired.
43 *
44 * The platform independent interrupt handler intel_hpd_irq_handler() in
45 * intel_hotplug.c does hotplug irq storm detection and mitigation, and passes
46 * further processing to appropriate bottom halves (Display Port specific and
47 * regular hotplug).
48 *
49 * The Display Port work function i915_digport_work_func() calls into
50 * intel_dp_hpd_pulse() via hooks, which handles DP short pulses and DP MST long
51 * pulses, with failures and non-MST long pulses triggering regular hotplug
52 * processing on the connector.
53 *
54 * The regular hotplug work function i915_hotplug_work_func() calls connector
55 * detect hooks, and, if connector status changes, triggers sending of hotplug
56 * uevent to userspace via drm_kms_helper_hotplug_event().
57 *
58 * Finally, the userspace is responsible for triggering a modeset upon receiving
59 * the hotplug uevent, disabling or enabling the crtc as needed.
60 *
61 * The hotplug interrupt storm detection and mitigation code keeps track of the
62 * number of interrupts per hotplug pin per a period of time, and if the number
63 * of interrupts exceeds a certain threshold, the interrupt is disabled for a
64 * while before being re-enabled. The intention is to mitigate issues raising
65 * from broken hardware triggering massive amounts of interrupts and grinding
66 * the system to a halt.
67 *
68 * Current implementation expects that hotplug interrupt storm will not be
69 * seen when display port sink is connected, hence on platforms whose DP
70 * callback is handled by i915_digport_work_func reenabling of hpd is not
71 * performed (it was never expected to be disabled in the first place ;) )
72 * this is specific to DP sinks handled by this routine and any other display
73 * such as HDMI or DVI enabled on the same port will have proper logic since
74 * it will use i915_hotplug_work_func where this logic is handled.
75 */
76
77/**
78 * intel_hpd_pin_default - return default pin associated with certain port.
79 * @dev_priv: private driver data pointer
80 * @port: the hpd port to get associated pin
81 *
82 * It is only valid and used by digital port encoder.
83 *
84 * Return pin that is associatade with @port.
85 */
86enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
87 enum port port)
88{
89 return HPD_PORT_A + port - PORT_A;
90}
91
92#define HPD_STORM_DETECT_PERIOD 1000
93#define HPD_STORM_REENABLE_DELAY (2 * 60 * 1000)
94#define HPD_RETRY_DELAY 1000
95
96static enum hpd_pin
97intel_connector_hpd_pin(struct intel_connector *connector)
98{
99 struct intel_encoder *encoder = intel_attached_encoder(connector);
100
101 /*
102 * MST connectors get their encoder attached dynamically
103 * so need to make sure we have an encoder here. But since
104 * MST encoders have their hpd_pin set to HPD_NONE we don't
105 * have to special case them beyond that.
106 */
107 return encoder ? encoder->hpd_pin : HPD_NONE;
108}
109
110/**
111 * intel_hpd_irq_storm_detect - gather stats and detect HPD IRQ storm on a pin
112 * @dev_priv: private driver data pointer
113 * @pin: the pin to gather stats on
114 * @long_hpd: whether the HPD IRQ was long or short
115 *
116 * Gather stats about HPD IRQs from the specified @pin, and detect IRQ
117 * storms. Only the pin specific stats and state are changed, the caller is
118 * responsible for further action.
119 *
120 * The number of IRQs that are allowed within @HPD_STORM_DETECT_PERIOD is
121 * stored in @dev_priv->hotplug.hpd_storm_threshold which defaults to
122 * @HPD_STORM_DEFAULT_THRESHOLD. Long IRQs count as +10 to this threshold, and
123 * short IRQs count as +1. If this threshold is exceeded, it's considered an
124 * IRQ storm and the IRQ state is set to @HPD_MARK_DISABLED.
125 *
126 * By default, most systems will only count long IRQs towards
127 * &dev_priv->hotplug.hpd_storm_threshold. However, some older systems also
128 * suffer from short IRQ storms and must also track these. Because short IRQ
129 * storms are naturally caused by sideband interactions with DP MST devices,
130 * short IRQ detection is only enabled for systems without DP MST support.
131 * Systems which are new enough to support DP MST are far less likely to
132 * suffer from IRQ storms at all, so this is fine.
133 *
134 * The HPD threshold can be controlled through i915_hpd_storm_ctl in debugfs,
135 * and should only be adjusted for automated hotplug testing.
136 *
137 * Return true if an IRQ storm was detected on @pin.
138 */
139static bool intel_hpd_irq_storm_detect(struct drm_i915_private *dev_priv,
140 enum hpd_pin pin, bool long_hpd)
141{
142 struct i915_hotplug *hpd = &dev_priv->hotplug;
143 unsigned long start = hpd->stats[pin].last_jiffies;
144 unsigned long end = start + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD);
145 const int increment = long_hpd ? 10 : 1;
146 const int threshold = hpd->hpd_storm_threshold;
147 bool storm = false;
148
149 if (!threshold ||
150 (!long_hpd && !dev_priv->hotplug.hpd_short_storm_enabled))
151 return false;
152
153 if (!time_in_range(jiffies, start, end)) {
154 hpd->stats[pin].last_jiffies = jiffies;
155 hpd->stats[pin].count = 0;
156 }
157
158 hpd->stats[pin].count += increment;
159 if (hpd->stats[pin].count > threshold) {
160 hpd->stats[pin].state = HPD_MARK_DISABLED;
161 drm_dbg_kms(&dev_priv->drm,
162 "HPD interrupt storm detected on PIN %d\n", pin);
163 storm = true;
164 } else {
165 drm_dbg_kms(&dev_priv->drm,
166 "Received HPD interrupt on PIN %d - cnt: %d\n",
167 pin,
168 hpd->stats[pin].count);
169 }
170
171 return storm;
172}
173
174static void
175intel_hpd_irq_storm_switch_to_polling(struct drm_i915_private *dev_priv)
176{
177 struct drm_device *dev = &dev_priv->drm;
178 struct drm_connector_list_iter conn_iter;
179 struct intel_connector *connector;
180 bool hpd_disabled = false;
181
182 lockdep_assert_held(&dev_priv->irq_lock);
183
184 drm_connector_list_iter_begin(dev, &conn_iter);
185 for_each_intel_connector_iter(connector, &conn_iter) {
186 enum hpd_pin pin;
187
188 if (connector->base.polled != DRM_CONNECTOR_POLL_HPD)
189 continue;
190
191 pin = intel_connector_hpd_pin(connector);
192 if (pin == HPD_NONE ||
193 dev_priv->hotplug.stats[pin].state != HPD_MARK_DISABLED)
194 continue;
195
196 drm_info(&dev_priv->drm,
197 "HPD interrupt storm detected on connector %s: "
198 "switching from hotplug detection to polling\n",
199 connector->base.name);
200
201 dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
202 connector->base.polled = DRM_CONNECTOR_POLL_CONNECT |
203 DRM_CONNECTOR_POLL_DISCONNECT;
204 hpd_disabled = true;
205 }
206 drm_connector_list_iter_end(&conn_iter);
207
208 /* Enable polling and queue hotplug re-enabling. */
209 if (hpd_disabled) {
210 drm_kms_helper_poll_enable(dev);
211 mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work,
212 msecs_to_jiffies(HPD_STORM_REENABLE_DELAY));
213 }
214}
215
216static void intel_hpd_irq_setup(struct drm_i915_private *i915)
217{
218 if (i915->display_irqs_enabled && i915->display.hpd_irq_setup)
219 i915->display.hpd_irq_setup(i915);
220}
221
222static void intel_hpd_irq_storm_reenable_work(struct work_struct *work)
223{
224 struct drm_i915_private *dev_priv =
225 container_of(work, typeof(*dev_priv),
226 hotplug.reenable_work.work);
227 struct drm_device *dev = &dev_priv->drm;
228 struct drm_connector_list_iter conn_iter;
229 struct intel_connector *connector;
230 intel_wakeref_t wakeref;
231 enum hpd_pin pin;
232
233 wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
234
235 spin_lock_irq(&dev_priv->irq_lock);
236
237 drm_connector_list_iter_begin(dev, &conn_iter);
238 for_each_intel_connector_iter(connector, &conn_iter) {
239 pin = intel_connector_hpd_pin(connector);
240 if (pin == HPD_NONE ||
241 dev_priv->hotplug.stats[pin].state != HPD_DISABLED)
242 continue;
243
244 if (connector->base.polled != connector->polled)
245 drm_dbg(&dev_priv->drm,
246 "Reenabling HPD on connector %s\n",
247 connector->base.name);
248 connector->base.polled = connector->polled;
249 }
250 drm_connector_list_iter_end(&conn_iter);
251
252 for_each_hpd_pin(pin) {
253 if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED)
254 dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
255 }
256
257 intel_hpd_irq_setup(dev_priv);
258
259 spin_unlock_irq(&dev_priv->irq_lock);
260
261 intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
262}
263
264enum intel_hotplug_state
265intel_encoder_hotplug(struct intel_encoder *encoder,
266 struct intel_connector *connector)
267{
268 struct drm_device *dev = connector->base.dev;
269 enum drm_connector_status old_status;
270 u64 old_epoch_counter;
271 bool ret = false;
272
273 drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
274 old_status = connector->base.status;
275 old_epoch_counter = connector->base.epoch_counter;
276
277 connector->base.status =
278 drm_helper_probe_detect(&connector->base, NULL, false);
279
280 if (old_epoch_counter != connector->base.epoch_counter)
281 ret = true;
282
283 if (ret) {
284 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s (epoch counter %llu->%llu)\n",
285 connector->base.base.id,
286 connector->base.name,
287 drm_get_connector_status_name(old_status),
288 drm_get_connector_status_name(connector->base.status),
289 old_epoch_counter,
290 connector->base.epoch_counter);
291 return INTEL_HOTPLUG_CHANGED;
292 }
293 return INTEL_HOTPLUG_UNCHANGED;
294}
295
296static bool intel_encoder_has_hpd_pulse(struct intel_encoder *encoder)
297{
298 return intel_encoder_is_dig_port(encoder) &&
299 enc_to_dig_port(encoder)->hpd_pulse != NULL;
300}
301
302static void i915_digport_work_func(struct work_struct *work)
303{
304 struct drm_i915_private *dev_priv =
305 container_of(work, struct drm_i915_private, hotplug.dig_port_work);
306 u32 long_port_mask, short_port_mask;
307 struct intel_encoder *encoder;
308 u32 old_bits = 0;
309
310 spin_lock_irq(&dev_priv->irq_lock);
311 long_port_mask = dev_priv->hotplug.long_port_mask;
312 dev_priv->hotplug.long_port_mask = 0;
313 short_port_mask = dev_priv->hotplug.short_port_mask;
314 dev_priv->hotplug.short_port_mask = 0;
315 spin_unlock_irq(&dev_priv->irq_lock);
316
317 for_each_intel_encoder(&dev_priv->drm, encoder) {
318 struct intel_digital_port *dig_port;
319 enum port port = encoder->port;
320 bool long_hpd, short_hpd;
321 enum irqreturn ret;
322
323 if (!intel_encoder_has_hpd_pulse(encoder))
324 continue;
325
326 long_hpd = long_port_mask & BIT(port);
327 short_hpd = short_port_mask & BIT(port);
328
329 if (!long_hpd && !short_hpd)
330 continue;
331
332 dig_port = enc_to_dig_port(encoder);
333
334 ret = dig_port->hpd_pulse(dig_port, long_hpd);
335 if (ret == IRQ_NONE) {
336 /* fall back to old school hpd */
337 old_bits |= BIT(encoder->hpd_pin);
338 }
339 }
340
341 if (old_bits) {
342 spin_lock_irq(&dev_priv->irq_lock);
343 dev_priv->hotplug.event_bits |= old_bits;
344 spin_unlock_irq(&dev_priv->irq_lock);
345 queue_delayed_work(system_wq, &dev_priv->hotplug.hotplug_work, 0);
346 }
347}
348
349/**
350 * intel_hpd_trigger_irq - trigger an hpd irq event for a port
351 * @dig_port: digital port
352 *
353 * Trigger an HPD interrupt event for the given port, emulating a short pulse
354 * generated by the sink, and schedule the dig port work to handle it.
355 */
356void intel_hpd_trigger_irq(struct intel_digital_port *dig_port)
357{
358 struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
359
360 spin_lock_irq(&i915->irq_lock);
361 i915->hotplug.short_port_mask |= BIT(dig_port->base.port);
362 spin_unlock_irq(&i915->irq_lock);
363
364 queue_work(i915->hotplug.dp_wq, &i915->hotplug.dig_port_work);
365}
366
367/*
368 * Handle hotplug events outside the interrupt handler proper.
369 */
370static void i915_hotplug_work_func(struct work_struct *work)
371{
372 struct drm_i915_private *dev_priv =
373 container_of(work, struct drm_i915_private,
374 hotplug.hotplug_work.work);
375 struct drm_device *dev = &dev_priv->drm;
376 struct drm_connector_list_iter conn_iter;
377 struct intel_connector *connector;
378 u32 changed = 0, retry = 0;
379 u32 hpd_event_bits;
380 u32 hpd_retry_bits;
381
382 mutex_lock(&dev->mode_config.mutex);
383 drm_dbg_kms(&dev_priv->drm, "running encoder hotplug functions\n");
384
385 spin_lock_irq(&dev_priv->irq_lock);
386
387 hpd_event_bits = dev_priv->hotplug.event_bits;
388 dev_priv->hotplug.event_bits = 0;
389 hpd_retry_bits = dev_priv->hotplug.retry_bits;
390 dev_priv->hotplug.retry_bits = 0;
391
392 /* Enable polling for connectors which had HPD IRQ storms */
393 intel_hpd_irq_storm_switch_to_polling(dev_priv);
394
395 spin_unlock_irq(&dev_priv->irq_lock);
396
397 drm_connector_list_iter_begin(dev, &conn_iter);
398 for_each_intel_connector_iter(connector, &conn_iter) {
399 enum hpd_pin pin;
400 u32 hpd_bit;
401
402 pin = intel_connector_hpd_pin(connector);
403 if (pin == HPD_NONE)
404 continue;
405
406 hpd_bit = BIT(pin);
407 if ((hpd_event_bits | hpd_retry_bits) & hpd_bit) {
408 struct intel_encoder *encoder =
409 intel_attached_encoder(connector);
410
411 if (hpd_event_bits & hpd_bit)
412 connector->hotplug_retries = 0;
413 else
414 connector->hotplug_retries++;
415
416 drm_dbg_kms(&dev_priv->drm,
417 "Connector %s (pin %i) received hotplug event. (retry %d)\n",
418 connector->base.name, pin,
419 connector->hotplug_retries);
420
421 switch (encoder->hotplug(encoder, connector)) {
422 case INTEL_HOTPLUG_UNCHANGED:
423 break;
424 case INTEL_HOTPLUG_CHANGED:
425 changed |= hpd_bit;
426 break;
427 case INTEL_HOTPLUG_RETRY:
428 retry |= hpd_bit;
429 break;
430 }
431 }
432 }
433 drm_connector_list_iter_end(&conn_iter);
434 mutex_unlock(&dev->mode_config.mutex);
435
436 if (changed)
437 drm_kms_helper_hotplug_event(dev);
438
439 /* Remove shared HPD pins that have changed */
440 retry &= ~changed;
441 if (retry) {
442 spin_lock_irq(&dev_priv->irq_lock);
443 dev_priv->hotplug.retry_bits |= retry;
444 spin_unlock_irq(&dev_priv->irq_lock);
445
446 mod_delayed_work(system_wq, &dev_priv->hotplug.hotplug_work,
447 msecs_to_jiffies(HPD_RETRY_DELAY));
448 }
449}
450
451
452/**
453 * intel_hpd_irq_handler - main hotplug irq handler
454 * @dev_priv: drm_i915_private
455 * @pin_mask: a mask of hpd pins that have triggered the irq
456 * @long_mask: a mask of hpd pins that may be long hpd pulses
457 *
458 * This is the main hotplug irq handler for all platforms. The platform specific
459 * irq handlers call the platform specific hotplug irq handlers, which read and
460 * decode the appropriate registers into bitmasks about hpd pins that have
461 * triggered (@pin_mask), and which of those pins may be long pulses
462 * (@long_mask). The @long_mask is ignored if the port corresponding to the pin
463 * is not a digital port.
464 *
465 * Here, we do hotplug irq storm detection and mitigation, and pass further
466 * processing to appropriate bottom halves.
467 */
468void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
469 u32 pin_mask, u32 long_mask)
470{
471 struct intel_encoder *encoder;
472 bool storm_detected = false;
473 bool queue_dig = false, queue_hp = false;
474 u32 long_hpd_pulse_mask = 0;
475 u32 short_hpd_pulse_mask = 0;
476 enum hpd_pin pin;
477
478 if (!pin_mask)
479 return;
480
481 spin_lock(&dev_priv->irq_lock);
482
483 /*
484 * Determine whether ->hpd_pulse() exists for each pin, and
485 * whether we have a short or a long pulse. This is needed
486 * as each pin may have up to two encoders (HDMI and DP) and
487 * only the one of them (DP) will have ->hpd_pulse().
488 */
489 for_each_intel_encoder(&dev_priv->drm, encoder) {
490 enum port port = encoder->port;
491 bool long_hpd;
492
493 pin = encoder->hpd_pin;
494 if (!(BIT(pin) & pin_mask))
495 continue;
496
497 if (!intel_encoder_has_hpd_pulse(encoder))
498 continue;
499
500 long_hpd = long_mask & BIT(pin);
501
502 drm_dbg(&dev_priv->drm,
503 "digital hpd on [ENCODER:%d:%s] - %s\n",
504 encoder->base.base.id, encoder->base.name,
505 long_hpd ? "long" : "short");
506 queue_dig = true;
507
508 if (long_hpd) {
509 long_hpd_pulse_mask |= BIT(pin);
510 dev_priv->hotplug.long_port_mask |= BIT(port);
511 } else {
512 short_hpd_pulse_mask |= BIT(pin);
513 dev_priv->hotplug.short_port_mask |= BIT(port);
514 }
515 }
516
517 /* Now process each pin just once */
518 for_each_hpd_pin(pin) {
519 bool long_hpd;
520
521 if (!(BIT(pin) & pin_mask))
522 continue;
523
524 if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) {
525 /*
526 * On GMCH platforms the interrupt mask bits only
527 * prevent irq generation, not the setting of the
528 * hotplug bits itself. So only WARN about unexpected
529 * interrupts on saner platforms.
530 */
531 drm_WARN_ONCE(&dev_priv->drm, !HAS_GMCH(dev_priv),
532 "Received HPD interrupt on pin %d although disabled\n",
533 pin);
534 continue;
535 }
536
537 if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED)
538 continue;
539
540 /*
541 * Delegate to ->hpd_pulse() if one of the encoders for this
542 * pin has it, otherwise let the hotplug_work deal with this
543 * pin directly.
544 */
545 if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) {
546 long_hpd = long_hpd_pulse_mask & BIT(pin);
547 } else {
548 dev_priv->hotplug.event_bits |= BIT(pin);
549 long_hpd = true;
550 queue_hp = true;
551 }
552
553 if (intel_hpd_irq_storm_detect(dev_priv, pin, long_hpd)) {
554 dev_priv->hotplug.event_bits &= ~BIT(pin);
555 storm_detected = true;
556 queue_hp = true;
557 }
558 }
559
560 /*
561 * Disable any IRQs that storms were detected on. Polling enablement
562 * happens later in our hotplug work.
563 */
564 if (storm_detected)
565 intel_hpd_irq_setup(dev_priv);
566 spin_unlock(&dev_priv->irq_lock);
567
568 /*
569 * Our hotplug handler can grab modeset locks (by calling down into the
570 * fb helpers). Hence it must not be run on our own dev-priv->wq work
571 * queue for otherwise the flush_work in the pageflip code will
572 * deadlock.
573 */
574 if (queue_dig)
575 queue_work(dev_priv->hotplug.dp_wq, &dev_priv->hotplug.dig_port_work);
576 if (queue_hp)
577 queue_delayed_work(system_wq, &dev_priv->hotplug.hotplug_work, 0);
578}
579
580/**
581 * intel_hpd_init - initializes and enables hpd support
582 * @dev_priv: i915 device instance
583 *
584 * This function enables the hotplug support. It requires that interrupts have
585 * already been enabled with intel_irq_init_hw(). From this point on hotplug and
586 * poll request can run concurrently to other code, so locking rules must be
587 * obeyed.
588 *
589 * This is a separate step from interrupt enabling to simplify the locking rules
590 * in the driver load and resume code.
591 *
592 * Also see: intel_hpd_poll_enable() and intel_hpd_poll_disable().
593 */
594void intel_hpd_init(struct drm_i915_private *dev_priv)
595{
596 int i;
597
598 if (!HAS_DISPLAY(dev_priv))
599 return;
600
601 for_each_hpd_pin(i) {
602 dev_priv->hotplug.stats[i].count = 0;
603 dev_priv->hotplug.stats[i].state = HPD_ENABLED;
604 }
605
606 /*
607 * Interrupt setup is already guaranteed to be single-threaded, this is
608 * just to make the assert_spin_locked checks happy.
609 */
610 spin_lock_irq(&dev_priv->irq_lock);
611 intel_hpd_irq_setup(dev_priv);
612 spin_unlock_irq(&dev_priv->irq_lock);
613}
614
615static void i915_hpd_poll_init_work(struct work_struct *work)
616{
617 struct drm_i915_private *dev_priv =
618 container_of(work, struct drm_i915_private,
619 hotplug.poll_init_work);
620 struct drm_device *dev = &dev_priv->drm;
621 struct drm_connector_list_iter conn_iter;
622 struct intel_connector *connector;
623 bool enabled;
624
625 mutex_lock(&dev->mode_config.mutex);
626
627 enabled = READ_ONCE(dev_priv->hotplug.poll_enabled);
628
629 drm_connector_list_iter_begin(dev, &conn_iter);
630 for_each_intel_connector_iter(connector, &conn_iter) {
631 enum hpd_pin pin;
632
633 pin = intel_connector_hpd_pin(connector);
634 if (pin == HPD_NONE)
635 continue;
636
637 connector->base.polled = connector->polled;
638
639 if (enabled && connector->base.polled == DRM_CONNECTOR_POLL_HPD)
640 connector->base.polled = DRM_CONNECTOR_POLL_CONNECT |
641 DRM_CONNECTOR_POLL_DISCONNECT;
642 }
643 drm_connector_list_iter_end(&conn_iter);
644
645 if (enabled)
646 drm_kms_helper_poll_enable(dev);
647
648 mutex_unlock(&dev->mode_config.mutex);
649
650 /*
651 * We might have missed any hotplugs that happened while we were
652 * in the middle of disabling polling
653 */
654 if (!enabled)
655 drm_helper_hpd_irq_event(dev);
656}
657
658/**
659 * intel_hpd_poll_enable - enable polling for connectors with hpd
660 * @dev_priv: i915 device instance
661 *
662 * This function enables polling for all connectors which support HPD.
663 * Under certain conditions HPD may not be functional. On most Intel GPUs,
664 * this happens when we enter runtime suspend.
665 * On Valleyview and Cherryview systems, this also happens when we shut off all
666 * of the powerwells.
667 *
668 * Since this function can get called in contexts where we're already holding
669 * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate
670 * worker.
671 *
672 * Also see: intel_hpd_init() and intel_hpd_poll_disable().
673 */
674void intel_hpd_poll_enable(struct drm_i915_private *dev_priv)
675{
676 if (!HAS_DISPLAY(dev_priv))
677 return;
678
679 WRITE_ONCE(dev_priv->hotplug.poll_enabled, true);
680
681 /*
682 * We might already be holding dev->mode_config.mutex, so do this in a
683 * seperate worker
684 * As well, there's no issue if we race here since we always reschedule
685 * this worker anyway
686 */
687 schedule_work(&dev_priv->hotplug.poll_init_work);
688}
689
690/**
691 * intel_hpd_poll_disable - disable polling for connectors with hpd
692 * @dev_priv: i915 device instance
693 *
694 * This function disables polling for all connectors which support HPD.
695 * Under certain conditions HPD may not be functional. On most Intel GPUs,
696 * this happens when we enter runtime suspend.
697 * On Valleyview and Cherryview systems, this also happens when we shut off all
698 * of the powerwells.
699 *
700 * Since this function can get called in contexts where we're already holding
701 * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate
702 * worker.
703 *
704 * Also used during driver init to initialize connector->polled
705 * appropriately for all connectors.
706 *
707 * Also see: intel_hpd_init() and intel_hpd_poll_enable().
708 */
709void intel_hpd_poll_disable(struct drm_i915_private *dev_priv)
710{
711 if (!HAS_DISPLAY(dev_priv))
712 return;
713
714 WRITE_ONCE(dev_priv->hotplug.poll_enabled, false);
715 schedule_work(&dev_priv->hotplug.poll_init_work);
716}
717
718void intel_hpd_init_work(struct drm_i915_private *dev_priv)
719{
720 INIT_DELAYED_WORK(&dev_priv->hotplug.hotplug_work,
721 i915_hotplug_work_func);
722 INIT_WORK(&dev_priv->hotplug.dig_port_work, i915_digport_work_func);
723 INIT_WORK(&dev_priv->hotplug.poll_init_work, i915_hpd_poll_init_work);
724 INIT_DELAYED_WORK(&dev_priv->hotplug.reenable_work,
725 intel_hpd_irq_storm_reenable_work);
726}
727
728void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
729{
730 if (!HAS_DISPLAY(dev_priv))
731 return;
732
733 spin_lock_irq(&dev_priv->irq_lock);
734
735 dev_priv->hotplug.long_port_mask = 0;
736 dev_priv->hotplug.short_port_mask = 0;
737 dev_priv->hotplug.event_bits = 0;
738 dev_priv->hotplug.retry_bits = 0;
739
740 spin_unlock_irq(&dev_priv->irq_lock);
741
742 cancel_work_sync(&dev_priv->hotplug.dig_port_work);
743 cancel_delayed_work_sync(&dev_priv->hotplug.hotplug_work);
744 cancel_work_sync(&dev_priv->hotplug.poll_init_work);
745 cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
746}
747
748bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
749{
750 bool ret = false;
751
752 if (pin == HPD_NONE)
753 return false;
754
755 spin_lock_irq(&dev_priv->irq_lock);
756 if (dev_priv->hotplug.stats[pin].state == HPD_ENABLED) {
757 dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
758 ret = true;
759 }
760 spin_unlock_irq(&dev_priv->irq_lock);
761
762 return ret;
763}
764
765void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
766{
767 if (pin == HPD_NONE)
768 return;
769
770 spin_lock_irq(&dev_priv->irq_lock);
771 dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
772 spin_unlock_irq(&dev_priv->irq_lock);
773}