Loading...
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Copyright 2014-2020 Toradex
4 */
5
6/ {
7 chosen {
8 stdout-path = "serial0:115200n8";
9 };
10
11 clk16m: clk16m {
12 compatible = "fixed-clock";
13 #clock-cells = <0>;
14 clock-frequency = <16000000>;
15 };
16
17 panel: panel {
18 compatible = "edt,et057090dhu";
19 backlight = <&bl>;
20
21 port {
22 panel_in: endpoint {
23 remote-endpoint = <&dcu_out>;
24 };
25 };
26 };
27
28 reg_3v3: regulator-3v3 {
29 compatible = "regulator-fixed";
30 regulator-name = "3.3V";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 };
34
35 reg_5v0: regulator-5v0 {
36 compatible = "regulator-fixed";
37 regulator-name = "5V";
38 regulator-min-microvolt = <5000000>;
39 regulator-max-microvolt = <5000000>;
40 };
41
42 reg_usbh_vbus: regulator-usbh-vbus {
43 compatible = "regulator-fixed";
44 pinctrl-names = "default";
45 pinctrl-0 = <&pinctrl_usbh1_reg>;
46 regulator-name = "VCC_USB[1-4]";
47 regulator-min-microvolt = <5000000>;
48 regulator-max-microvolt = <5000000>;
49 gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
50 vin-supply = <®_5v0>;
51 };
52};
53
54&bl {
55 brightness-levels = <0 4 8 16 32 64 128 255>;
56 default-brightness-level = <6>;
57 power-supply = <®_3v3>;
58 status = "okay";
59};
60
61&dcu0 {
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_dcu0_1>;
64 status = "okay";
65
66 port {
67 dcu_out: endpoint {
68 remote-endpoint = <&panel_in>;
69 };
70 };
71};
72
73&dspi1 {
74 status = "okay";
75
76 mcp2515can: can@0 {
77 compatible = "microchip,mcp2515";
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_can_int>;
80 reg = <0>;
81 clocks = <&clk16m>;
82 spi-max-frequency = <10000000>;
83 interrupt-parent = <&gpio1>;
84 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
85 };
86};
87
88&esdhc1 {
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_esdhc1>;
91 bus-width = <4>;
92 status = "okay";
93};
94
95&fec1 {
96 phy-mode = "rmii";
97 pinctrl-names = "default";
98 pinctrl-0 = <&pinctrl_fec1>;
99 status = "okay";
100};
101
102&i2c0 {
103 status = "okay";
104
105 /* M41T0M6 real time clock on carrier board */
106 rtc: m41t0m6@68 {
107 compatible = "st,m41t0";
108 reg = <0x68>;
109 };
110};
111
112&pwm0 {
113 status = "okay";
114};
115
116&pwm1 {
117 status = "okay";
118};
119
120®_module_3v3 {
121 vin-supply = <®_3v3>;
122};
123
124&tcon0 {
125 status = "okay";
126};
127
128&uart0 {
129 status = "okay";
130};
131
132&uart1 {
133 status = "okay";
134};
135
136&uart2 {
137 status = "okay";
138};
139
140&usbh1 {
141 vbus-supply = <®_usbh_vbus>;
142};
143
144&iomuxc {
145 vf610-colibri {
146 pinctrl_can_int: can_int {
147 fsl,pins = <
148 VF610_PAD_PTB21__GPIO_43 0x22ed
149 >;
150 };
151 };
152};
1/*
2 * Copyright 2014 Toradex AG
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * Or, alternatively,
19 *
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use,
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
27 * conditions:
28 *
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
31 *
32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
40 */
41
42/ {
43 chosen {
44 stdout-path = "serial0:115200n8";
45 };
46
47 clk16m: clk16m {
48 compatible = "fixed-clock";
49 #clock-cells = <0>;
50 clock-frequency = <16000000>;
51 };
52
53 panel: panel {
54 compatible = "edt,et057090dhu";
55 backlight = <&bl>;
56
57 port {
58 panel_in: endpoint {
59 remote-endpoint = <&dcu_out>;
60 };
61 };
62 };
63
64 reg_3v3: regulator-3v3 {
65 compatible = "regulator-fixed";
66 regulator-name = "3.3V";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
69 };
70
71 reg_5v0: regulator-5v0 {
72 compatible = "regulator-fixed";
73 regulator-name = "5V";
74 regulator-min-microvolt = <5000000>;
75 regulator-max-microvolt = <5000000>;
76 };
77
78 reg_usbh_vbus: regulator-usbh-vbus {
79 compatible = "regulator-fixed";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_usbh1_reg>;
82 regulator-name = "VCC_USB[1-4]";
83 regulator-min-microvolt = <5000000>;
84 regulator-max-microvolt = <5000000>;
85 gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
86 vin-supply = <®_5v0>;
87 };
88};
89
90&bl {
91 brightness-levels = <0 4 8 16 32 64 128 255>;
92 default-brightness-level = <6>;
93 power-supply = <®_3v3>;
94 status = "okay";
95};
96
97&dcu0 {
98 pinctrl-names = "default";
99 pinctrl-0 = <&pinctrl_dcu0_1>;
100 status = "okay";
101
102 port {
103 dcu_out: endpoint {
104 remote-endpoint = <&panel_in>;
105 };
106 };
107};
108
109&dspi1 {
110 status = "okay";
111
112 mcp2515can: can@0 {
113 compatible = "microchip,mcp2515";
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_can_int>;
116 reg = <0>;
117 clocks = <&clk16m>;
118 spi-max-frequency = <10000000>;
119 interrupt-parent = <&gpio1>;
120 interrupts = <11 GPIO_ACTIVE_LOW>;
121 };
122};
123
124&esdhc1 {
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_esdhc1>;
127 bus-width = <4>;
128 status = "okay";
129};
130
131&fec1 {
132 phy-mode = "rmii";
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_fec1>;
135 status = "okay";
136};
137
138&i2c0 {
139 status = "okay";
140
141 /* M41T0M6 real time clock on carrier board */
142 rtc: m41t0m6@68 {
143 compatible = "st,m41t0";
144 reg = <0x68>;
145 };
146};
147
148&pwm0 {
149 status = "okay";
150};
151
152&pwm1 {
153 status = "okay";
154};
155
156®_module_3v3 {
157 vin-supply = <®_3v3>;
158};
159
160&tcon0 {
161 status = "okay";
162};
163
164&uart0 {
165 status = "okay";
166};
167
168&uart1 {
169 status = "okay";
170};
171
172&uart2 {
173 status = "okay";
174};
175
176&usbh1 {
177 vbus-supply = <®_usbh_vbus>;
178};
179
180&iomuxc {
181 vf610-colibri {
182 pinctrl_can_int: can_int {
183 fsl,pins = <
184 VF610_PAD_PTB21__GPIO_43 0x22ed
185 >;
186 };
187 };
188};