Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the SILK board
4 *
5 * Copyright (C) 2014 Renesas Electronics Corporation
6 * Copyright (C) 2014-2015 Renesas Solutions Corp.
7 * Copyright (C) 2014-2015 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 2-1: AK4643
14 * 2-3: ADV7511
15 *
16 * This command is required before playback/capture:
17 *
18 * amixer set "LINEOUT Mixer DACL" on
19 */
20
21/dts-v1/;
22#include "r8a7794.dtsi"
23#include <dt-bindings/gpio/gpio.h>
24#include <dt-bindings/input/input.h>
25
26/ {
27 model = "SILK";
28 compatible = "renesas,silk", "renesas,r8a7794";
29
30 aliases {
31 serial0 = &scif2;
32 i2c9 = &gpioi2c1;
33 i2c10 = &i2chdmi;
34 mmc0 = &mmcif0;
35 mmc1 = &sdhi1;
36 };
37
38 chosen {
39 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
40 stdout-path = "serial0:115200n8";
41 };
42
43 memory@40000000 {
44 device_type = "memory";
45 reg = <0 0x40000000 0 0x40000000>;
46 };
47
48 keyboard {
49 compatible = "gpio-keys";
50
51 pinctrl-0 = <&keyboard_pins>;
52 pinctrl-names = "default";
53
54 key-3 {
55 gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
56 linux,code = <KEY_3>;
57 label = "SW3";
58 wakeup-source;
59 debounce-interval = <20>;
60 };
61 key-4 {
62 gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_4>;
64 label = "SW4";
65 wakeup-source;
66 debounce-interval = <20>;
67 };
68 key-6 {
69 gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_6>;
71 label = "SW6";
72 wakeup-source;
73 debounce-interval = <20>;
74 };
75 key-a {
76 gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
77 linux,code = <KEY_A>;
78 label = "SW12-1";
79 wakeup-source;
80 debounce-interval = <20>;
81 };
82 key-b {
83 gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_B>;
85 label = "SW12-2";
86 wakeup-source;
87 debounce-interval = <20>;
88 };
89 key-c {
90 gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
91 linux,code = <KEY_C>;
92 label = "SW12-3";
93 wakeup-source;
94 debounce-interval = <20>;
95 };
96 key-d {
97 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
98 linux,code = <KEY_D>;
99 label = "SW12-4";
100 wakeup-source;
101 debounce-interval = <20>;
102 };
103 };
104
105 d3_3v: regulator-d3-3v {
106 compatible = "regulator-fixed";
107 regulator-name = "D3.3V";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 regulator-boot-on;
111 regulator-always-on;
112 };
113
114 vcc_sdhi1: regulator-vcc-sdhi1 {
115 compatible = "regulator-fixed";
116
117 regulator-name = "SDHI1 Vcc";
118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <3300000>;
120
121 gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
122 enable-active-high;
123 };
124
125 vccq_sdhi1: regulator-vccq-sdhi1 {
126 compatible = "regulator-gpio";
127
128 regulator-name = "SDHI1 VccQ";
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <3300000>;
131
132 gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
133 gpios-states = <1>;
134 states = <3300000 1>, <1800000 0>;
135 };
136
137 vga-encoder {
138 compatible = "adi,adv7123";
139
140 ports {
141 #address-cells = <1>;
142 #size-cells = <0>;
143
144 port@0 {
145 reg = <0>;
146 adv7123_in: endpoint {
147 remote-endpoint = <&du_out_rgb1>;
148 };
149 };
150 port@1 {
151 reg = <1>;
152 adv7123_out: endpoint {
153 remote-endpoint = <&vga_in>;
154 };
155 };
156 };
157 };
158
159 hdmi-out {
160 compatible = "hdmi-connector";
161 type = "a";
162
163 port {
164 hdmi_con: endpoint {
165 remote-endpoint = <&adv7511_out>;
166 };
167 };
168 };
169
170 vga {
171 compatible = "vga-connector";
172
173 port {
174 vga_in: endpoint {
175 remote-endpoint = <&adv7123_out>;
176 };
177 };
178 };
179
180 x2_clk: x2-clock {
181 compatible = "fixed-clock";
182 #clock-cells = <0>;
183 clock-frequency = <148500000>;
184 };
185
186 x3_clk: x3-clock {
187 compatible = "fixed-clock";
188 #clock-cells = <0>;
189 clock-frequency = <74250000>;
190 };
191
192 x9_clk: audio_clock {
193 compatible = "fixed-clock";
194 #clock-cells = <0>;
195 clock-frequency = <12288000>;
196 };
197
198 sound {
199 compatible = "simple-audio-card";
200
201 simple-audio-card,format = "left_j";
202 simple-audio-card,bitclock-master = <&soundcodec>;
203 simple-audio-card,frame-master = <&soundcodec>;
204
205 simple-audio-card,cpu {
206 sound-dai = <&rcar_sound>;
207 };
208
209 soundcodec: simple-audio-card,codec {
210 sound-dai = <&ak4643>;
211 clocks = <&x9_clk>;
212 };
213 };
214
215 gpioi2c1: i2c-9 {
216 #address-cells = <1>;
217 #size-cells = <0>;
218 compatible = "i2c-gpio";
219 status = "disabled";
220 scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
221 sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
222 i2c-gpio,delay-us = <5>;
223 };
224
225 /*
226 * A fallback to GPIO is provided for I2C1.
227 */
228 i2chdmi: i2c-10 {
229 compatible = "i2c-demux-pinctrl";
230 i2c-parent = <&i2c1>, <&gpioi2c1>;
231 i2c-bus-name = "i2c-hdmi";
232 #address-cells = <1>;
233 #size-cells = <0>;
234
235 ak4643: codec@12 {
236 compatible = "asahi-kasei,ak4643";
237 #sound-dai-cells = <0>;
238 reg = <0x12>;
239 };
240
241 composite-in@20 {
242 compatible = "adi,adv7180";
243 reg = <0x20>;
244
245 port {
246 adv7180: endpoint {
247 bus-width = <8>;
248 remote-endpoint = <&vin0ep>;
249 };
250 };
251 };
252
253 hdmi@39 {
254 compatible = "adi,adv7511w";
255 reg = <0x39>;
256 interrupt-parent = <&gpio5>;
257 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
258
259 adi,input-depth = <8>;
260 adi,input-colorspace = "rgb";
261 adi,input-clock = "1x";
262
263 ports {
264 #address-cells = <1>;
265 #size-cells = <0>;
266
267 port@0 {
268 reg = <0>;
269 adv7511_in: endpoint {
270 remote-endpoint = <&du_out_rgb0>;
271 };
272 };
273
274 port@1 {
275 reg = <1>;
276 adv7511_out: endpoint {
277 remote-endpoint = <&hdmi_con>;
278 };
279 };
280 };
281 };
282
283 eeprom@50 {
284 compatible = "renesas,r1ex24002", "atmel,24c02";
285 reg = <0x50>;
286 pagesize = <16>;
287 };
288 };
289};
290
291&extal_clk {
292 clock-frequency = <20000000>;
293};
294
295&pfc {
296 pinctrl-0 = <&scif_clk_pins>;
297 pinctrl-names = "default";
298
299 scif2_pins: scif2 {
300 groups = "scif2_data";
301 function = "scif2";
302 };
303
304 scif_clk_pins: scif_clk {
305 groups = "scif_clk";
306 function = "scif_clk";
307 };
308
309 ether_pins: ether {
310 groups = "eth_link", "eth_mdio", "eth_rmii";
311 function = "eth";
312 };
313
314 phy1_pins: phy1 {
315 groups = "intc_irq8";
316 function = "intc";
317 };
318
319 i2c1_pins: i2c1 {
320 groups = "i2c1";
321 function = "i2c1";
322 };
323
324 mmcif0_pins: mmcif0 {
325 groups = "mmc_data8", "mmc_ctrl";
326 function = "mmc";
327 };
328
329 sdhi1_pins: sd1 {
330 groups = "sdhi1_data4", "sdhi1_ctrl";
331 function = "sdhi1";
332 };
333
334 qspi_pins: qspi {
335 groups = "qspi_ctrl", "qspi_data4";
336 function = "qspi";
337 };
338
339 vin0_pins: vin0 {
340 groups = "vin0_data8", "vin0_clk";
341 function = "vin0";
342 };
343
344 usb0_pins: usb0 {
345 groups = "usb0";
346 function = "usb0";
347 };
348
349 usb1_pins: usb1 {
350 groups = "usb1";
351 function = "usb1";
352 };
353
354 du0_pins: du0 {
355 groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
356 function = "du0";
357 };
358
359 du1_pins: du1 {
360 groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
361 function = "du1";
362 };
363
364 keyboard_pins: keyboard {
365 pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
366 bias-pull-up;
367 };
368
369 ssi_pins: sound {
370 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
371 function = "ssi";
372 };
373
374 audio_clk_pins: audio_clk {
375 groups = "audio_clkc";
376 function = "audio_clk";
377 };
378};
379
380&scif2 {
381 pinctrl-0 = <&scif2_pins>;
382 pinctrl-names = "default";
383
384 status = "okay";
385};
386
387&scif_clk {
388 clock-frequency = <14745600>;
389};
390
391ðer {
392 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
393 pinctrl-names = "default";
394
395 phy-handle = <&phy1>;
396 renesas,ether-link-active-low;
397 status = "okay";
398
399 phy1: ethernet-phy@1 {
400 reg = <1>;
401 interrupt-parent = <&irqc0>;
402 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
403 micrel,led-mode = <1>;
404 reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
405 };
406};
407
408&i2c1 {
409 pinctrl-0 = <&i2c1_pins>;
410 pinctrl-names = "i2c-hdmi";
411
412 clock-frequency = <400000>;
413};
414
415&i2c7 {
416 status = "okay";
417 clock-frequency = <100000>;
418
419 pmic@58 {
420 compatible = "dlg,da9063";
421 reg = <0x58>;
422 interrupt-parent = <&gpio3>;
423 interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
424 interrupt-controller;
425
426 onkey {
427 compatible = "dlg,da9063-onkey";
428 };
429
430 rtc {
431 compatible = "dlg,da9063-rtc";
432 };
433
434 wdt {
435 compatible = "dlg,da9063-watchdog";
436 };
437 };
438};
439
440&mmcif0 {
441 pinctrl-0 = <&mmcif0_pins>;
442 pinctrl-names = "default";
443
444 vmmc-supply = <&d3_3v>;
445 vqmmc-supply = <&d3_3v>;
446 bus-width = <8>;
447 non-removable;
448 status = "okay";
449};
450
451&sdhi1 {
452 pinctrl-0 = <&sdhi1_pins>;
453 pinctrl-names = "default";
454
455 vmmc-supply = <&vcc_sdhi1>;
456 vqmmc-supply = <&vccq_sdhi1>;
457 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
458 status = "okay";
459};
460
461&qspi {
462 pinctrl-0 = <&qspi_pins>;
463 pinctrl-names = "default";
464
465 status = "okay";
466
467 flash@0 {
468 compatible = "spansion,s25fl512s", "jedec,spi-nor";
469 reg = <0>;
470 spi-max-frequency = <30000000>;
471 spi-tx-bus-width = <4>;
472 spi-rx-bus-width = <4>;
473 spi-cpol;
474 spi-cpha;
475 m25p,fast-read;
476
477 partitions {
478 compatible = "fixed-partitions";
479 #address-cells = <1>;
480 #size-cells = <1>;
481
482 partition@0 {
483 label = "loader";
484 reg = <0x00000000 0x00040000>;
485 read-only;
486 };
487 partition@40000 {
488 label = "user";
489 reg = <0x00040000 0x00400000>;
490 read-only;
491 };
492 partition@440000 {
493 label = "flash";
494 reg = <0x00440000 0x03bc0000>;
495 };
496 };
497 };
498};
499
500/* composite video input */
501&vin0 {
502 status = "okay";
503 pinctrl-0 = <&vin0_pins>;
504 pinctrl-names = "default";
505
506 port {
507 vin0ep: endpoint {
508 remote-endpoint = <&adv7180>;
509 bus-width = <8>;
510 };
511 };
512};
513
514&pci0 {
515 status = "okay";
516 pinctrl-0 = <&usb0_pins>;
517 pinctrl-names = "default";
518};
519
520&pci1 {
521 status = "okay";
522 pinctrl-0 = <&usb1_pins>;
523 pinctrl-names = "default";
524};
525
526&usbphy {
527 status = "okay";
528};
529
530&du {
531 pinctrl-0 = <&du0_pins>, <&du1_pins>;
532 pinctrl-names = "default";
533 status = "okay";
534
535 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
536 <&x2_clk>, <&x3_clk>;
537 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
538
539 ports {
540 port@0 {
541 endpoint {
542 remote-endpoint = <&adv7511_in>;
543 };
544 };
545 port@1 {
546 endpoint {
547 remote-endpoint = <&adv7123_in>;
548 };
549 };
550 };
551};
552
553&rcar_sound {
554 pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
555 pinctrl-names = "default";
556 status = "okay";
557
558 /* Single DAI */
559 #sound-dai-cells = <0>;
560
561 rcar_sound,dai {
562 dai0 {
563 playback = <&ssi0>;
564 capture = <&ssi1>;
565 };
566 };
567};
568
569&rwdt {
570 timeout-sec = <60>;
571 status = "okay";
572};
573
574&ssi1 {
575 shared-pin;
576};
1/*
2 * Device Tree Source for the SILK board
3 *
4 * Copyright (C) 2014 Renesas Electronics Corporation
5 * Copyright (C) 2014-2015 Renesas Solutions Corp.
6 * Copyright (C) 2014-2015 Cogent Embedded, Inc.
7 *
8 * This file is licensed under the terms of the GNU General Public License
9 * version 2. This program is licensed "as is" without any warranty of any
10 * kind, whether express or implied.
11 */
12
13/*
14 * SSI-AK4643
15 *
16 * SW1: 2-1: AK4643
17 * 2-3: ADV7511
18 *
19 * This command is required before playback/capture:
20 *
21 * amixer set "LINEOUT Mixer DACL" on
22 */
23
24/dts-v1/;
25#include "r8a7794.dtsi"
26#include <dt-bindings/gpio/gpio.h>
27#include <dt-bindings/input/input.h>
28
29/ {
30 model = "SILK";
31 compatible = "renesas,silk", "renesas,r8a7794";
32
33 aliases {
34 serial0 = &scif2;
35 i2c9 = &gpioi2c1;
36 i2c10 = &i2chdmi;
37 };
38
39 chosen {
40 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
41 stdout-path = "serial0:115200n8";
42 };
43
44 memory@40000000 {
45 device_type = "memory";
46 reg = <0 0x40000000 0 0x40000000>;
47 };
48
49 gpio-keys {
50 compatible = "gpio-keys";
51
52 key-3 {
53 gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_3>;
55 label = "SW3";
56 wakeup-source;
57 debounce-interval = <20>;
58 };
59 key-4 {
60 gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_4>;
62 label = "SW4";
63 wakeup-source;
64 debounce-interval = <20>;
65 };
66 key-6 {
67 gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_6>;
69 label = "SW6";
70 wakeup-source;
71 debounce-interval = <20>;
72 };
73 key-a {
74 gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_A>;
76 label = "SW12-1";
77 wakeup-source;
78 debounce-interval = <20>;
79 };
80 key-b {
81 gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_B>;
83 label = "SW12-2";
84 wakeup-source;
85 debounce-interval = <20>;
86 };
87 key-c {
88 gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_C>;
90 label = "SW12-3";
91 wakeup-source;
92 debounce-interval = <20>;
93 };
94 key-d {
95 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_D>;
97 label = "SW12-4";
98 wakeup-source;
99 debounce-interval = <20>;
100 };
101 };
102
103 d3_3v: regulator-d3-3v {
104 compatible = "regulator-fixed";
105 regulator-name = "D3.3V";
106 regulator-min-microvolt = <3300000>;
107 regulator-max-microvolt = <3300000>;
108 regulator-boot-on;
109 regulator-always-on;
110 };
111
112 vcc_sdhi1: regulator-vcc-sdhi1 {
113 compatible = "regulator-fixed";
114
115 regulator-name = "SDHI1 Vcc";
116 regulator-min-microvolt = <3300000>;
117 regulator-max-microvolt = <3300000>;
118
119 gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
120 enable-active-high;
121 };
122
123 vccq_sdhi1: regulator-vccq-sdhi1 {
124 compatible = "regulator-gpio";
125
126 regulator-name = "SDHI1 VccQ";
127 regulator-min-microvolt = <1800000>;
128 regulator-max-microvolt = <3300000>;
129
130 gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
131 gpios-states = <1>;
132 states = <3300000 1
133 1800000 0>;
134 };
135
136 vga-encoder {
137 compatible = "adi,adv7123";
138
139 ports {
140 #address-cells = <1>;
141 #size-cells = <0>;
142
143 port@0 {
144 reg = <0>;
145 adv7123_in: endpoint {
146 remote-endpoint = <&du_out_rgb1>;
147 };
148 };
149 port@1 {
150 reg = <1>;
151 adv7123_out: endpoint {
152 remote-endpoint = <&vga_in>;
153 };
154 };
155 };
156 };
157
158 hdmi-out {
159 compatible = "hdmi-connector";
160 type = "a";
161
162 port {
163 hdmi_con: endpoint {
164 remote-endpoint = <&adv7511_out>;
165 };
166 };
167 };
168
169 vga {
170 compatible = "vga-connector";
171
172 port {
173 vga_in: endpoint {
174 remote-endpoint = <&adv7123_out>;
175 };
176 };
177 };
178
179 x2_clk: x2-clock {
180 compatible = "fixed-clock";
181 #clock-cells = <0>;
182 clock-frequency = <148500000>;
183 };
184
185 x3_clk: x3-clock {
186 compatible = "fixed-clock";
187 #clock-cells = <0>;
188 clock-frequency = <74250000>;
189 };
190
191 x9_clk: audio_clock {
192 compatible = "fixed-clock";
193 #clock-cells = <0>;
194 clock-frequency = <12288000>;
195 };
196
197 sound {
198 compatible = "simple-audio-card";
199
200 simple-audio-card,format = "left_j";
201 simple-audio-card,bitclock-master = <&soundcodec>;
202 simple-audio-card,frame-master = <&soundcodec>;
203
204 simple-audio-card,cpu {
205 sound-dai = <&rcar_sound>;
206 };
207
208 soundcodec: simple-audio-card,codec {
209 sound-dai = <&ak4643>;
210 clocks = <&x9_clk>;
211 };
212 };
213
214 gpioi2c1: i2c-9 {
215 #address-cells = <1>;
216 #size-cells = <0>;
217 compatible = "i2c-gpio";
218 status = "disabled";
219 scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
220 sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
221 i2c-gpio,delay-us = <5>;
222 };
223
224 /*
225 * A fallback to GPIO is provided for I2C1.
226 */
227 i2chdmi: i2c-10 {
228 compatible = "i2c-demux-pinctrl";
229 i2c-parent = <&i2c1>, <&gpioi2c1>;
230 i2c-bus-name = "i2c-hdmi";
231 #address-cells = <1>;
232 #size-cells = <0>;
233
234 ak4643: codec@12 {
235 compatible = "asahi-kasei,ak4643";
236 #sound-dai-cells = <0>;
237 reg = <0x12>;
238 };
239
240 composite-in@20 {
241 compatible = "adi,adv7180";
242 reg = <0x20>;
243 remote = <&vin0>;
244
245 port {
246 adv7180: endpoint {
247 bus-width = <8>;
248 remote-endpoint = <&vin0ep>;
249 };
250 };
251 };
252
253 hdmi@39 {
254 compatible = "adi,adv7511w";
255 reg = <0x39>;
256 interrupt-parent = <&gpio5>;
257 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
258
259 adi,input-depth = <8>;
260 adi,input-colorspace = "rgb";
261 adi,input-clock = "1x";
262 adi,input-style = <1>;
263 adi,input-justification = "evenly";
264
265 ports {
266 #address-cells = <1>;
267 #size-cells = <0>;
268
269 port@0 {
270 reg = <0>;
271 adv7511_in: endpoint {
272 remote-endpoint = <&du_out_rgb0>;
273 };
274 };
275
276 port@1 {
277 reg = <1>;
278 adv7511_out: endpoint {
279 remote-endpoint = <&hdmi_con>;
280 };
281 };
282 };
283 };
284
285 eeprom@50 {
286 compatible = "renesas,r1ex24002", "atmel,24c02";
287 reg = <0x50>;
288 pagesize = <16>;
289 };
290 };
291};
292
293&extal_clk {
294 clock-frequency = <20000000>;
295};
296
297&pfc {
298 pinctrl-0 = <&scif_clk_pins>;
299 pinctrl-names = "default";
300
301 scif2_pins: scif2 {
302 groups = "scif2_data";
303 function = "scif2";
304 };
305
306 scif_clk_pins: scif_clk {
307 groups = "scif_clk";
308 function = "scif_clk";
309 };
310
311 ether_pins: ether {
312 groups = "eth_link", "eth_mdio", "eth_rmii";
313 function = "eth";
314 };
315
316 phy1_pins: phy1 {
317 groups = "intc_irq8";
318 function = "intc";
319 };
320
321 i2c1_pins: i2c1 {
322 groups = "i2c1";
323 function = "i2c1";
324 };
325
326 mmcif0_pins: mmcif0 {
327 groups = "mmc_data8", "mmc_ctrl";
328 function = "mmc";
329 };
330
331 sdhi1_pins: sd1 {
332 groups = "sdhi1_data4", "sdhi1_ctrl";
333 function = "sdhi1";
334 };
335
336 qspi_pins: qspi {
337 groups = "qspi_ctrl", "qspi_data4";
338 function = "qspi";
339 };
340
341 vin0_pins: vin0 {
342 groups = "vin0_data8", "vin0_clk";
343 function = "vin0";
344 };
345
346 usb0_pins: usb0 {
347 groups = "usb0";
348 function = "usb0";
349 };
350
351 usb1_pins: usb1 {
352 groups = "usb1";
353 function = "usb1";
354 };
355
356 du0_pins: du0 {
357 groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
358 function = "du0";
359 };
360
361 du1_pins: du1 {
362 groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
363 function = "du1";
364 };
365
366 ssi_pins: sound {
367 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
368 function = "ssi";
369 };
370
371 audio_clk_pins: audio_clk {
372 groups = "audio_clkc";
373 function = "audio_clk";
374 };
375};
376
377&scif2 {
378 pinctrl-0 = <&scif2_pins>;
379 pinctrl-names = "default";
380
381 status = "okay";
382};
383
384&scif_clk {
385 clock-frequency = <14745600>;
386};
387
388ðer {
389 pinctrl-0 = <ðer_pins &phy1_pins>;
390 pinctrl-names = "default";
391
392 phy-handle = <&phy1>;
393 renesas,ether-link-active-low;
394 status = "okay";
395
396 phy1: ethernet-phy@1 {
397 reg = <1>;
398 interrupt-parent = <&irqc0>;
399 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
400 micrel,led-mode = <1>;
401 };
402};
403
404&i2c1 {
405 pinctrl-0 = <&i2c1_pins>;
406 pinctrl-names = "i2c-hdmi";
407
408 clock-frequency = <400000>;
409};
410
411&mmcif0 {
412 pinctrl-0 = <&mmcif0_pins>;
413 pinctrl-names = "default";
414
415 vmmc-supply = <&d3_3v>;
416 vqmmc-supply = <&d3_3v>;
417 bus-width = <8>;
418 non-removable;
419 status = "okay";
420};
421
422&sdhi1 {
423 pinctrl-0 = <&sdhi1_pins>;
424 pinctrl-names = "default";
425
426 vmmc-supply = <&vcc_sdhi1>;
427 vqmmc-supply = <&vccq_sdhi1>;
428 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
429 status = "okay";
430};
431
432&qspi {
433 pinctrl-0 = <&qspi_pins>;
434 pinctrl-names = "default";
435
436 status = "okay";
437
438 flash@0 {
439 compatible = "spansion,s25fl512s", "jedec,spi-nor";
440 reg = <0>;
441 spi-max-frequency = <30000000>;
442 spi-tx-bus-width = <4>;
443 spi-rx-bus-width = <4>;
444 spi-cpol;
445 spi-cpha;
446 m25p,fast-read;
447
448 partitions {
449 compatible = "fixed-partitions";
450 #address-cells = <1>;
451 #size-cells = <1>;
452
453 partition@0 {
454 label = "loader";
455 reg = <0x00000000 0x00040000>;
456 read-only;
457 };
458 partition@40000 {
459 label = "user";
460 reg = <0x00040000 0x00400000>;
461 read-only;
462 };
463 partition@440000 {
464 label = "flash";
465 reg = <0x00440000 0x03bc0000>;
466 };
467 };
468 };
469};
470
471/* composite video input */
472&vin0 {
473 status = "okay";
474 pinctrl-0 = <&vin0_pins>;
475 pinctrl-names = "default";
476
477 port {
478 #address-cells = <1>;
479 #size-cells = <0>;
480
481 vin0ep: endpoint {
482 remote-endpoint = <&adv7180>;
483 bus-width = <8>;
484 };
485 };
486};
487
488&pci0 {
489 status = "okay";
490 pinctrl-0 = <&usb0_pins>;
491 pinctrl-names = "default";
492};
493
494&pci1 {
495 status = "okay";
496 pinctrl-0 = <&usb1_pins>;
497 pinctrl-names = "default";
498};
499
500&usbphy {
501 status = "okay";
502};
503
504&du {
505 pinctrl-0 = <&du0_pins &du1_pins>;
506 pinctrl-names = "default";
507 status = "okay";
508
509 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
510 <&x2_clk>, <&x3_clk>;
511 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
512
513 ports {
514 port@0 {
515 endpoint {
516 remote-endpoint = <&adv7511_in>;
517 };
518 };
519 port@1 {
520 endpoint {
521 remote-endpoint = <&adv7123_in>;
522 };
523 };
524 };
525};
526
527&rcar_sound {
528 pinctrl-0 = <&ssi_pins &audio_clk_pins>;
529 pinctrl-names = "default";
530 status = "okay";
531
532 /* Single DAI */
533 #sound-dai-cells = <0>;
534
535 rcar_sound,dai {
536 dai0 {
537 playback = <&ssi0>;
538 capture = <&ssi1>;
539 };
540 };
541};
542
543&ssi1 {
544 shared-pin;
545};