Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Gose board
4 *
5 * Copyright (C) 2014-2015 Renesas Electronics Corporation
6 */
7
8/*
9 * SSI-AK4643
10 *
11 * SW1: 1: AK4643
12 * 2: CN22
13 * 3: ADV7511
14 *
15 * This command is required when Playback/Capture
16 *
17 * amixer set "LINEOUT Mixer DACL" on
18 * amixer set "DVC Out" 100%
19 * amixer set "DVC In" 100%
20 *
21 * You can use Mute
22 *
23 * amixer set "DVC Out Mute" on
24 * amixer set "DVC In Mute" on
25 *
26 * You can use Volume Ramp
27 *
28 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
29 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
30 * amixer set "DVC Out Ramp" on
31 * aplay xxx.wav &
32 * amixer set "DVC Out" 80% // Volume Down
33 * amixer set "DVC Out" 100% // Volume Up
34 */
35
36/dts-v1/;
37#include "r8a7793.dtsi"
38#include <dt-bindings/gpio/gpio.h>
39#include <dt-bindings/input/input.h>
40
41/ {
42 model = "Gose";
43 compatible = "renesas,gose", "renesas,r8a7793";
44
45 aliases {
46 serial0 = &scif0;
47 serial1 = &scif1;
48 i2c9 = &gpioi2c2;
49 i2c10 = &gpioi2c4;
50 i2c11 = &i2chdmi;
51 i2c12 = &i2cexio4;
52 mmc0 = &sdhi0;
53 mmc1 = &sdhi1;
54 mmc2 = &sdhi2;
55 };
56
57 chosen {
58 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
59 stdout-path = "serial0:115200n8";
60 };
61
62 memory@40000000 {
63 device_type = "memory";
64 reg = <0 0x40000000 0 0x40000000>;
65 };
66
67 keyboard {
68 compatible = "gpio-keys";
69
70 pinctrl-0 = <&keyboard_pins>;
71 pinctrl-names = "default";
72
73 key-1 {
74 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_1>;
76 label = "SW2-1";
77 wakeup-source;
78 debounce-interval = <20>;
79 };
80 key-2 {
81 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_2>;
83 label = "SW2-2";
84 wakeup-source;
85 debounce-interval = <20>;
86 };
87 key-3 {
88 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_3>;
90 label = "SW2-3";
91 wakeup-source;
92 debounce-interval = <20>;
93 };
94 key-4 {
95 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_4>;
97 label = "SW2-4";
98 wakeup-source;
99 debounce-interval = <20>;
100 };
101 key-a {
102 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
103 linux,code = <KEY_A>;
104 label = "SW30";
105 wakeup-source;
106 debounce-interval = <20>;
107 };
108 key-b {
109 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_B>;
111 label = "SW31";
112 wakeup-source;
113 debounce-interval = <20>;
114 };
115 key-c {
116 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
117 linux,code = <KEY_C>;
118 label = "SW32";
119 wakeup-source;
120 debounce-interval = <20>;
121 };
122 key-d {
123 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
124 linux,code = <KEY_D>;
125 label = "SW33";
126 wakeup-source;
127 debounce-interval = <20>;
128 };
129 key-e {
130 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
131 linux,code = <KEY_E>;
132 label = "SW34";
133 wakeup-source;
134 debounce-interval = <20>;
135 };
136 key-f {
137 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
138 linux,code = <KEY_F>;
139 label = "SW35";
140 wakeup-source;
141 debounce-interval = <20>;
142 };
143 key-g {
144 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
145 linux,code = <KEY_G>;
146 label = "SW36";
147 wakeup-source;
148 debounce-interval = <20>;
149 };
150 };
151
152 leds {
153 compatible = "gpio-leds";
154 led6 {
155 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
156 label = "LED6";
157 };
158 led7 {
159 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
160 label = "LED7";
161 };
162 led8 {
163 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
164 label = "LED8";
165 };
166 };
167
168 vcc_sdhi0: regulator-vcc-sdhi0 {
169 compatible = "regulator-fixed";
170
171 regulator-name = "SDHI0 Vcc";
172 regulator-min-microvolt = <3300000>;
173 regulator-max-microvolt = <3300000>;
174
175 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
176 enable-active-high;
177 };
178
179 vccq_sdhi0: regulator-vccq-sdhi0 {
180 compatible = "regulator-gpio";
181
182 regulator-name = "SDHI0 VccQ";
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <3300000>;
185
186 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
187 gpios-states = <1>;
188 states = <3300000 1>, <1800000 0>;
189 };
190
191 vcc_sdhi1: regulator-vcc-sdhi1 {
192 compatible = "regulator-fixed";
193
194 regulator-name = "SDHI1 Vcc";
195 regulator-min-microvolt = <3300000>;
196 regulator-max-microvolt = <3300000>;
197
198 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
199 enable-active-high;
200 };
201
202 vccq_sdhi1: regulator-vccq-sdhi1 {
203 compatible = "regulator-gpio";
204
205 regulator-name = "SDHI1 VccQ";
206 regulator-min-microvolt = <1800000>;
207 regulator-max-microvolt = <3300000>;
208
209 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
210 gpios-states = <1>;
211 states = <3300000 1>, <1800000 0>;
212 };
213
214 vcc_sdhi2: regulator-vcc-sdhi2 {
215 compatible = "regulator-fixed";
216
217 regulator-name = "SDHI2 Vcc";
218 regulator-min-microvolt = <3300000>;
219 regulator-max-microvolt = <3300000>;
220
221 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
222 enable-active-high;
223 };
224
225 vccq_sdhi2: regulator-vccq-sdhi2 {
226 compatible = "regulator-gpio";
227
228 regulator-name = "SDHI2 VccQ";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <3300000>;
231
232 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
233 gpios-states = <1>;
234 states = <3300000 1>, <1800000 0>;
235 };
236
237 audio_clock: audio_clock {
238 compatible = "fixed-clock";
239 #clock-cells = <0>;
240 clock-frequency = <11289600>;
241 };
242
243 rsnd_ak4643: sound {
244 compatible = "simple-audio-card";
245
246 simple-audio-card,format = "left_j";
247 simple-audio-card,bitclock-master = <&sndcodec>;
248 simple-audio-card,frame-master = <&sndcodec>;
249
250 sndcpu: simple-audio-card,cpu {
251 sound-dai = <&rcar_sound>;
252 };
253
254 sndcodec: simple-audio-card,codec {
255 sound-dai = <&ak4643>;
256 clocks = <&audio_clock>;
257 };
258 };
259
260 hdmi-in {
261 compatible = "hdmi-connector";
262 type = "a";
263
264 port {
265 hdmi_con_in: endpoint {
266 remote-endpoint = <&adv7612_in>;
267 };
268 };
269 };
270
271 hdmi-out {
272 compatible = "hdmi-connector";
273 type = "a";
274
275 port {
276 hdmi_con_out: endpoint {
277 remote-endpoint = <&adv7511_out>;
278 };
279 };
280 };
281
282 composite-in {
283 compatible = "composite-video-connector";
284
285 port {
286 composite_con_in: endpoint {
287 remote-endpoint = <&adv7180_in>;
288 };
289 };
290 };
291
292 x2_clk: x2-clock {
293 compatible = "fixed-clock";
294 #clock-cells = <0>;
295 clock-frequency = <74250000>;
296 };
297
298 x13_clk: x13-clock {
299 compatible = "fixed-clock";
300 #clock-cells = <0>;
301 clock-frequency = <148500000>;
302 };
303
304 gpioi2c2: i2c-9 {
305 #address-cells = <1>;
306 #size-cells = <0>;
307 compatible = "i2c-gpio";
308 status = "disabled";
309 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
310 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
311 i2c-gpio,delay-us = <5>;
312 };
313
314 gpioi2c4: i2c-10 {
315 #address-cells = <1>;
316 #size-cells = <0>;
317 compatible = "i2c-gpio";
318 status = "disabled";
319 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321 i2c-gpio,delay-us = <5>;
322 };
323
324 /*
325 * A fallback to GPIO is provided for I2C2.
326 */
327 i2chdmi: i2c-11 {
328 compatible = "i2c-demux-pinctrl";
329 i2c-parent = <&i2c2>, <&gpioi2c2>;
330 i2c-bus-name = "i2c-hdmi";
331 #address-cells = <1>;
332 #size-cells = <0>;
333
334 ak4643: codec@12 {
335 compatible = "asahi-kasei,ak4643";
336 #sound-dai-cells = <0>;
337 reg = <0x12>;
338 };
339
340 composite-in@20 {
341 compatible = "adi,adv7180cp";
342 reg = <0x20>;
343
344 ports {
345 #address-cells = <1>;
346 #size-cells = <0>;
347
348 port@0 {
349 reg = <0>;
350 adv7180_in: endpoint {
351 remote-endpoint = <&composite_con_in>;
352 };
353 };
354
355 port@3 {
356 reg = <3>;
357 adv7180_out: endpoint {
358 bus-width = <8>;
359 remote-endpoint = <&vin1ep>;
360 };
361 };
362 };
363 };
364
365 hdmi@39 {
366 compatible = "adi,adv7511w";
367 reg = <0x39>;
368 interrupt-parent = <&gpio3>;
369 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
370
371 adi,input-depth = <8>;
372 adi,input-colorspace = "rgb";
373 adi,input-clock = "1x";
374
375 ports {
376 #address-cells = <1>;
377 #size-cells = <0>;
378
379 port@0 {
380 reg = <0>;
381 adv7511_in: endpoint {
382 remote-endpoint = <&du_out_rgb>;
383 };
384 };
385
386 port@1 {
387 reg = <1>;
388 adv7511_out: endpoint {
389 remote-endpoint = <&hdmi_con_out>;
390 };
391 };
392 };
393 };
394
395 hdmi-in@4c {
396 compatible = "adi,adv7612";
397 reg = <0x4c>;
398 interrupt-parent = <&gpio4>;
399 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
400 default-input = <0>;
401
402 ports {
403 #address-cells = <1>;
404 #size-cells = <0>;
405
406 port@0 {
407 reg = <0>;
408 adv7612_in: endpoint {
409 remote-endpoint = <&hdmi_con_in>;
410 };
411 };
412
413 port@2 {
414 reg = <2>;
415 adv7612_out: endpoint {
416 remote-endpoint = <&vin0ep2>;
417 };
418 };
419 };
420 };
421
422 eeprom@50 {
423 compatible = "renesas,r1ex24002", "atmel,24c02";
424 reg = <0x50>;
425 pagesize = <16>;
426 };
427 };
428
429 /*
430 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
431 * A fallback to GPIO is provided.
432 */
433 i2cexio4: i2c-12 {
434 compatible = "i2c-demux-pinctrl";
435 i2c-parent = <&i2c4>, <&gpioi2c4>;
436 i2c-bus-name = "i2c-exio4";
437 #address-cells = <1>;
438 #size-cells = <0>;
439 };
440};
441
442&du {
443 pinctrl-0 = <&du_pins>;
444 pinctrl-names = "default";
445 status = "okay";
446
447 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
448 <&x13_clk>, <&x2_clk>;
449 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
450
451 ports {
452 port@0 {
453 endpoint {
454 remote-endpoint = <&adv7511_in>;
455 };
456 };
457 };
458};
459
460&lvds0 {
461 ports {
462 port@1 {
463 lvds_connector: endpoint {
464 };
465 };
466 };
467};
468
469&extal_clk {
470 clock-frequency = <20000000>;
471};
472
473&pfc {
474 pinctrl-0 = <&scif_clk_pins>;
475 pinctrl-names = "default";
476
477 i2c2_pins: i2c2 {
478 groups = "i2c2";
479 function = "i2c2";
480 };
481
482 i2c4_pins: i2c4 {
483 groups = "i2c4_c";
484 function = "i2c4";
485 };
486
487 du_pins: du {
488 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
489 function = "du";
490 };
491
492 scif0_pins: scif0 {
493 groups = "scif0_data_d";
494 function = "scif0";
495 };
496
497 scif1_pins: scif1 {
498 groups = "scif1_data_d";
499 function = "scif1";
500 };
501
502 scif_clk_pins: scif_clk {
503 groups = "scif_clk";
504 function = "scif_clk";
505 };
506
507 ether_pins: ether {
508 groups = "eth_link", "eth_mdio", "eth_rmii";
509 function = "eth";
510 };
511
512 phy1_pins: phy1 {
513 groups = "intc_irq0";
514 function = "intc";
515 };
516
517 pmic_irq_pins: pmicirq {
518 groups = "intc_irq2";
519 function = "intc";
520 };
521
522 sdhi0_pins: sd0 {
523 groups = "sdhi0_data4", "sdhi0_ctrl";
524 function = "sdhi0";
525 power-source = <3300>;
526 };
527
528 sdhi0_pins_uhs: sd0_uhs {
529 groups = "sdhi0_data4", "sdhi0_ctrl";
530 function = "sdhi0";
531 power-source = <1800>;
532 };
533
534 sdhi1_pins: sd1 {
535 groups = "sdhi1_data4", "sdhi1_ctrl";
536 function = "sdhi1";
537 power-source = <3300>;
538 };
539
540 sdhi1_pins_uhs: sd1_uhs {
541 groups = "sdhi1_data4", "sdhi1_ctrl";
542 function = "sdhi1";
543 power-source = <1800>;
544 };
545
546 sdhi2_pins: sd2 {
547 groups = "sdhi2_data4", "sdhi2_ctrl";
548 function = "sdhi2";
549 power-source = <3300>;
550 };
551
552 sdhi2_pins_uhs: sd2_uhs {
553 groups = "sdhi2_data4", "sdhi2_ctrl";
554 function = "sdhi2";
555 power-source = <1800>;
556 };
557
558 qspi_pins: qspi {
559 groups = "qspi_ctrl", "qspi_data4";
560 function = "qspi";
561 };
562
563 sound_pins: sound {
564 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
565 function = "ssi";
566 };
567
568 sound_clk_pins: sound_clk {
569 groups = "audio_clk_a";
570 function = "audio_clk";
571 };
572
573 keyboard_pins: keyboard {
574 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
575 bias-pull-up;
576 };
577
578 vin0_pins: vin0 {
579 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
580 function = "vin0";
581 };
582
583 vin1_pins: vin1 {
584 groups = "vin1_data8", "vin1_clk";
585 function = "vin1";
586 };
587};
588
589ðer {
590 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
591 pinctrl-names = "default";
592
593 phy-handle = <&phy1>;
594 renesas,ether-link-active-low;
595 status = "okay";
596
597 phy1: ethernet-phy@1 {
598 reg = <1>;
599 interrupt-parent = <&irqc0>;
600 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
601 micrel,led-mode = <1>;
602 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
603 };
604};
605
606&cmt0 {
607 status = "okay";
608};
609
610&cpu0 {
611 cpu0-supply = <&vdd_dvfs>;
612};
613
614&rwdt {
615 timeout-sec = <60>;
616 status = "okay";
617};
618
619&scif0 {
620 pinctrl-0 = <&scif0_pins>;
621 pinctrl-names = "default";
622
623 status = "okay";
624};
625
626&scif1 {
627 pinctrl-0 = <&scif1_pins>;
628 pinctrl-names = "default";
629
630 status = "okay";
631};
632
633&scif_clk {
634 clock-frequency = <14745600>;
635};
636
637&sdhi0 {
638 pinctrl-0 = <&sdhi0_pins>;
639 pinctrl-1 = <&sdhi0_pins_uhs>;
640 pinctrl-names = "default", "state_uhs";
641
642 vmmc-supply = <&vcc_sdhi0>;
643 vqmmc-supply = <&vccq_sdhi0>;
644 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
645 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
646 sd-uhs-sdr50;
647 sd-uhs-sdr104;
648 status = "okay";
649};
650
651&sdhi1 {
652 pinctrl-0 = <&sdhi1_pins>;
653 pinctrl-1 = <&sdhi1_pins_uhs>;
654 pinctrl-names = "default", "state_uhs";
655
656 vmmc-supply = <&vcc_sdhi1>;
657 vqmmc-supply = <&vccq_sdhi1>;
658 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
659 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
660 sd-uhs-sdr50;
661 status = "okay";
662};
663
664&sdhi2 {
665 pinctrl-0 = <&sdhi2_pins>;
666 pinctrl-1 = <&sdhi2_pins_uhs>;
667 pinctrl-names = "default", "state_uhs";
668
669 vmmc-supply = <&vcc_sdhi2>;
670 vqmmc-supply = <&vccq_sdhi2>;
671 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
672 sd-uhs-sdr50;
673 status = "okay";
674};
675
676&qspi {
677 pinctrl-0 = <&qspi_pins>;
678 pinctrl-names = "default";
679
680 status = "okay";
681
682 flash@0 {
683 compatible = "spansion,s25fl512s", "jedec,spi-nor";
684 reg = <0>;
685 spi-max-frequency = <30000000>;
686 spi-tx-bus-width = <4>;
687 spi-rx-bus-width = <4>;
688 spi-cpol;
689 spi-cpha;
690 m25p,fast-read;
691
692 partitions {
693 compatible = "fixed-partitions";
694 #address-cells = <1>;
695 #size-cells = <1>;
696
697 partition@0 {
698 label = "loader";
699 reg = <0x00000000 0x00040000>;
700 read-only;
701 };
702 partition@40000 {
703 label = "user";
704 reg = <0x00040000 0x00400000>;
705 read-only;
706 };
707 partition@440000 {
708 label = "flash";
709 reg = <0x00440000 0x03bc0000>;
710 };
711 };
712 };
713};
714
715&i2c2 {
716 pinctrl-0 = <&i2c2_pins>;
717 pinctrl-names = "i2c-hdmi";
718
719 status = "okay";
720 clock-frequency = <100000>;
721
722};
723
724&i2c6 {
725 pinctrl-names = "default";
726 pinctrl-0 = <&pmic_irq_pins>;
727 status = "okay";
728 clock-frequency = <100000>;
729
730 pmic@58 {
731 compatible = "dlg,da9063";
732 reg = <0x58>;
733 interrupt-parent = <&irqc0>;
734 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
735 interrupt-controller;
736
737 rtc {
738 compatible = "dlg,da9063-rtc";
739 };
740
741 wdt {
742 compatible = "dlg,da9063-watchdog";
743 };
744 };
745
746 vdd_dvfs: regulator@68 {
747 compatible = "dlg,da9210";
748 reg = <0x68>;
749 interrupt-parent = <&irqc0>;
750 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
751
752 regulator-min-microvolt = <1000000>;
753 regulator-max-microvolt = <1000000>;
754 regulator-boot-on;
755 regulator-always-on;
756 };
757};
758
759&i2c4 {
760 pinctrl-0 = <&i2c4_pins>;
761 pinctrl-names = "i2c-exio4";
762};
763
764&rcar_sound {
765 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
766 pinctrl-names = "default";
767
768 /* Single DAI */
769 #sound-dai-cells = <0>;
770
771 status = "okay";
772
773 rcar_sound,dai {
774 dai0 {
775 playback = <&ssi0>, <&src2>, <&dvc0>;
776 capture = <&ssi1>, <&src3>, <&dvc1>;
777 };
778 };
779};
780
781&ssi1 {
782 shared-pin;
783};
784
785/* HDMI video input */
786&vin0 {
787 status = "okay";
788 pinctrl-0 = <&vin0_pins>;
789 pinctrl-names = "default";
790
791 port {
792 vin0ep2: endpoint {
793 remote-endpoint = <&adv7612_out>;
794 bus-width = <24>;
795 hsync-active = <0>;
796 vsync-active = <0>;
797 pclk-sample = <1>;
798 data-active = <1>;
799 };
800 };
801};
802
803/* composite video input */
804&vin1 {
805 pinctrl-0 = <&vin1_pins>;
806 pinctrl-names = "default";
807
808 status = "okay";
809
810 port {
811 vin1ep: endpoint {
812 remote-endpoint = <&adv7180_out>;
813 bus-width = <8>;
814 };
815 };
816};
1/*
2 * Device Tree Source for the Gose board
3 *
4 * Copyright (C) 2014-2015 Renesas Electronics Corporation
5 *
6 * This file is licensed under the terms of the GNU General Public License
7 * version 2. This program is licensed "as is" without any warranty of any
8 * kind, whether express or implied.
9 */
10
11/*
12 * SSI-AK4643
13 *
14 * SW1: 1: AK4643
15 * 2: CN22
16 * 3: ADV7511
17 *
18 * This command is required when Playback/Capture
19 *
20 * amixer set "LINEOUT Mixer DACL" on
21 * amixer set "DVC Out" 100%
22 * amixer set "DVC In" 100%
23 *
24 * You can use Mute
25 *
26 * amixer set "DVC Out Mute" on
27 * amixer set "DVC In Mute" on
28 *
29 * You can use Volume Ramp
30 *
31 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
32 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
33 * amixer set "DVC Out Ramp" on
34 * aplay xxx.wav &
35 * amixer set "DVC Out" 80% // Volume Down
36 * amixer set "DVC Out" 100% // Volume Up
37 */
38
39/dts-v1/;
40#include "r8a7793.dtsi"
41#include <dt-bindings/gpio/gpio.h>
42#include <dt-bindings/input/input.h>
43
44/ {
45 model = "Gose";
46 compatible = "renesas,gose", "renesas,r8a7793";
47
48 aliases {
49 serial0 = &scif0;
50 serial1 = &scif1;
51 i2c9 = &gpioi2c2;
52 i2c10 = &gpioi2c4;
53 i2c11 = &i2chdmi;
54 i2c12 = &i2cexio4;
55 };
56
57 chosen {
58 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
59 stdout-path = "serial0:115200n8";
60 };
61
62 memory@40000000 {
63 device_type = "memory";
64 reg = <0 0x40000000 0 0x40000000>;
65 };
66
67 gpio-keys {
68 compatible = "gpio-keys";
69
70 key-1 {
71 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_1>;
73 label = "SW2-1";
74 wakeup-source;
75 debounce-interval = <20>;
76 };
77 key-2 {
78 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
79 linux,code = <KEY_2>;
80 label = "SW2-2";
81 wakeup-source;
82 debounce-interval = <20>;
83 };
84 key-3 {
85 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
86 linux,code = <KEY_3>;
87 label = "SW2-3";
88 wakeup-source;
89 debounce-interval = <20>;
90 };
91 key-4 {
92 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
93 linux,code = <KEY_4>;
94 label = "SW2-4";
95 wakeup-source;
96 debounce-interval = <20>;
97 };
98 key-a {
99 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_A>;
101 label = "SW30";
102 wakeup-source;
103 debounce-interval = <20>;
104 };
105 key-b {
106 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
107 linux,code = <KEY_B>;
108 label = "SW31";
109 wakeup-source;
110 debounce-interval = <20>;
111 };
112 key-c {
113 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
114 linux,code = <KEY_C>;
115 label = "SW32";
116 wakeup-source;
117 debounce-interval = <20>;
118 };
119 key-d {
120 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
121 linux,code = <KEY_D>;
122 label = "SW33";
123 wakeup-source;
124 debounce-interval = <20>;
125 };
126 key-e {
127 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
128 linux,code = <KEY_E>;
129 label = "SW34";
130 wakeup-source;
131 debounce-interval = <20>;
132 };
133 key-f {
134 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
135 linux,code = <KEY_F>;
136 label = "SW35";
137 wakeup-source;
138 debounce-interval = <20>;
139 };
140 key-g {
141 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
142 linux,code = <KEY_G>;
143 label = "SW36";
144 wakeup-source;
145 debounce-interval = <20>;
146 };
147 };
148
149 leds {
150 compatible = "gpio-leds";
151 led6 {
152 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
153 label = "LED6";
154 };
155 led7 {
156 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
157 label = "LED7";
158 };
159 led8 {
160 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
161 label = "LED8";
162 };
163 };
164
165 vcc_sdhi0: regulator-vcc-sdhi0 {
166 compatible = "regulator-fixed";
167
168 regulator-name = "SDHI0 Vcc";
169 regulator-min-microvolt = <3300000>;
170 regulator-max-microvolt = <3300000>;
171
172 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
173 enable-active-high;
174 };
175
176 vccq_sdhi0: regulator-vccq-sdhi0 {
177 compatible = "regulator-gpio";
178
179 regulator-name = "SDHI0 VccQ";
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <3300000>;
182
183 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
184 gpios-states = <1>;
185 states = <3300000 1
186 1800000 0>;
187 };
188
189 vcc_sdhi1: regulator-vcc-sdhi1 {
190 compatible = "regulator-fixed";
191
192 regulator-name = "SDHI1 Vcc";
193 regulator-min-microvolt = <3300000>;
194 regulator-max-microvolt = <3300000>;
195
196 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
197 enable-active-high;
198 };
199
200 vccq_sdhi1: regulator-vccq-sdhi1 {
201 compatible = "regulator-gpio";
202
203 regulator-name = "SDHI1 VccQ";
204 regulator-min-microvolt = <1800000>;
205 regulator-max-microvolt = <3300000>;
206
207 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
208 gpios-states = <1>;
209 states = <3300000 1
210 1800000 0>;
211 };
212
213 vcc_sdhi2: regulator-vcc-sdhi2 {
214 compatible = "regulator-fixed";
215
216 regulator-name = "SDHI2 Vcc";
217 regulator-min-microvolt = <3300000>;
218 regulator-max-microvolt = <3300000>;
219
220 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
221 enable-active-high;
222 };
223
224 vccq_sdhi2: regulator-vccq-sdhi2 {
225 compatible = "regulator-gpio";
226
227 regulator-name = "SDHI2 VccQ";
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <3300000>;
230
231 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
232 gpios-states = <1>;
233 states = <3300000 1
234 1800000 0>;
235 };
236
237 audio_clock: audio_clock {
238 compatible = "fixed-clock";
239 #clock-cells = <0>;
240 clock-frequency = <11289600>;
241 };
242
243 rsnd_ak4643: sound {
244 compatible = "simple-audio-card";
245
246 simple-audio-card,format = "left_j";
247 simple-audio-card,bitclock-master = <&sndcodec>;
248 simple-audio-card,frame-master = <&sndcodec>;
249
250 sndcpu: simple-audio-card,cpu {
251 sound-dai = <&rcar_sound>;
252 };
253
254 sndcodec: simple-audio-card,codec {
255 sound-dai = <&ak4643>;
256 clocks = <&audio_clock>;
257 };
258 };
259
260 hdmi-in {
261 compatible = "hdmi-connector";
262 type = "a";
263
264 port {
265 hdmi_con_in: endpoint {
266 remote-endpoint = <&adv7612_in>;
267 };
268 };
269 };
270
271 hdmi-out {
272 compatible = "hdmi-connector";
273 type = "a";
274
275 port {
276 hdmi_con_out: endpoint {
277 remote-endpoint = <&adv7511_out>;
278 };
279 };
280 };
281
282 composite-in {
283 compatible = "composite-video-connector";
284
285 port {
286 composite_con_in: endpoint {
287 remote-endpoint = <&adv7180_in>;
288 };
289 };
290 };
291
292 x2_clk: x2-clock {
293 compatible = "fixed-clock";
294 #clock-cells = <0>;
295 clock-frequency = <74250000>;
296 };
297
298 x13_clk: x13-clock {
299 compatible = "fixed-clock";
300 #clock-cells = <0>;
301 clock-frequency = <148500000>;
302 };
303
304 gpioi2c2: i2c-9 {
305 #address-cells = <1>;
306 #size-cells = <0>;
307 compatible = "i2c-gpio";
308 status = "disabled";
309 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
310 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
311 i2c-gpio,delay-us = <5>;
312 };
313
314 gpioi2c4: i2c-10 {
315 #address-cells = <1>;
316 #size-cells = <0>;
317 compatible = "i2c-gpio";
318 status = "disabled";
319 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321 i2c-gpio,delay-us = <5>;
322 };
323
324 /*
325 * A fallback to GPIO is provided for I2C2.
326 */
327 i2chdmi: i2c-11 {
328 compatible = "i2c-demux-pinctrl";
329 i2c-parent = <&i2c2>, <&gpioi2c2>;
330 i2c-bus-name = "i2c-hdmi";
331 #address-cells = <1>;
332 #size-cells = <0>;
333
334 ak4643: codec@12 {
335 compatible = "asahi-kasei,ak4643";
336 #sound-dai-cells = <0>;
337 reg = <0x12>;
338 };
339
340 composite-in@20 {
341 compatible = "adi,adv7180cp";
342 reg = <0x20>;
343 remote = <&vin1>;
344
345 port {
346 #address-cells = <1>;
347 #size-cells = <0>;
348
349 port@0 {
350 reg = <0>;
351 adv7180_in: endpoint {
352 remote-endpoint = <&composite_con_in>;
353 };
354 };
355
356 port@3 {
357 reg = <3>;
358 adv7180_out: endpoint {
359 bus-width = <8>;
360 remote-endpoint = <&vin1ep>;
361 };
362 };
363 };
364 };
365
366 hdmi@39 {
367 compatible = "adi,adv7511w";
368 reg = <0x39>;
369 interrupt-parent = <&gpio3>;
370 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
371
372 adi,input-depth = <8>;
373 adi,input-colorspace = "rgb";
374 adi,input-clock = "1x";
375 adi,input-style = <1>;
376 adi,input-justification = "evenly";
377
378 ports {
379 #address-cells = <1>;
380 #size-cells = <0>;
381
382 port@0 {
383 reg = <0>;
384 adv7511_in: endpoint {
385 remote-endpoint = <&du_out_rgb>;
386 };
387 };
388
389 port@1 {
390 reg = <1>;
391 adv7511_out: endpoint {
392 remote-endpoint = <&hdmi_con_out>;
393 };
394 };
395 };
396 };
397
398 hdmi-in@4c {
399 compatible = "adi,adv7612";
400 reg = <0x4c>;
401 interrupt-parent = <&gpio4>;
402 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
403 default-input = <0>;
404
405 port {
406 #address-cells = <1>;
407 #size-cells = <0>;
408
409 port@0 {
410 reg = <0>;
411 adv7612_in: endpoint {
412 remote-endpoint = <&hdmi_con_in>;
413 };
414 };
415
416 port@2 {
417 reg = <2>;
418 adv7612_out: endpoint {
419 remote-endpoint = <&vin0ep2>;
420 };
421 };
422 };
423 };
424
425 eeprom@50 {
426 compatible = "renesas,r1ex24002", "atmel,24c02";
427 reg = <0x50>;
428 pagesize = <16>;
429 };
430 };
431
432 /*
433 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
434 * A fallback to GPIO is provided.
435 */
436 i2cexio4: i2c-12 {
437 compatible = "i2c-demux-pinctrl";
438 i2c-parent = <&i2c4>, <&gpioi2c4>;
439 i2c-bus-name = "i2c-exio4";
440 #address-cells = <1>;
441 #size-cells = <0>;
442 };
443};
444
445&du {
446 pinctrl-0 = <&du_pins>;
447 pinctrl-names = "default";
448 status = "okay";
449
450 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
451 <&x13_clk>, <&x2_clk>;
452 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
453
454 ports {
455 port@0 {
456 endpoint {
457 remote-endpoint = <&adv7511_in>;
458 };
459 };
460 };
461};
462
463&lvds0 {
464 ports {
465 port@1 {
466 lvds_connector: endpoint {
467 };
468 };
469 };
470};
471
472&extal_clk {
473 clock-frequency = <20000000>;
474};
475
476&pfc {
477 pinctrl-0 = <&scif_clk_pins>;
478 pinctrl-names = "default";
479
480 i2c2_pins: i2c2 {
481 groups = "i2c2";
482 function = "i2c2";
483 };
484
485 i2c4_pins: i2c4 {
486 groups = "i2c4_c";
487 function = "i2c4";
488 };
489
490 du_pins: du {
491 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
492 function = "du";
493 };
494
495 scif0_pins: scif0 {
496 groups = "scif0_data_d";
497 function = "scif0";
498 };
499
500 scif1_pins: scif1 {
501 groups = "scif1_data_d";
502 function = "scif1";
503 };
504
505 scif_clk_pins: scif_clk {
506 groups = "scif_clk";
507 function = "scif_clk";
508 };
509
510 ether_pins: ether {
511 groups = "eth_link", "eth_mdio", "eth_rmii";
512 function = "eth";
513 };
514
515 phy1_pins: phy1 {
516 groups = "intc_irq0";
517 function = "intc";
518 };
519
520 sdhi0_pins: sd0 {
521 groups = "sdhi0_data4", "sdhi0_ctrl";
522 function = "sdhi0";
523 power-source = <3300>;
524 };
525
526 sdhi0_pins_uhs: sd0_uhs {
527 groups = "sdhi0_data4", "sdhi0_ctrl";
528 function = "sdhi0";
529 power-source = <1800>;
530 };
531
532 sdhi1_pins: sd1 {
533 groups = "sdhi1_data4", "sdhi1_ctrl";
534 function = "sdhi1";
535 power-source = <3300>;
536 };
537
538 sdhi1_pins_uhs: sd1_uhs {
539 groups = "sdhi1_data4", "sdhi1_ctrl";
540 function = "sdhi1";
541 power-source = <1800>;
542 };
543
544 sdhi2_pins: sd2 {
545 groups = "sdhi2_data4", "sdhi2_ctrl";
546 function = "sdhi2";
547 power-source = <3300>;
548 };
549
550 sdhi2_pins_uhs: sd2_uhs {
551 groups = "sdhi2_data4", "sdhi2_ctrl";
552 function = "sdhi2";
553 power-source = <1800>;
554 };
555
556 qspi_pins: qspi {
557 groups = "qspi_ctrl", "qspi_data4";
558 function = "qspi";
559 };
560
561 sound_pins: sound {
562 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
563 function = "ssi";
564 };
565
566 sound_clk_pins: sound_clk {
567 groups = "audio_clk_a";
568 function = "audio_clk";
569 };
570
571 vin0_pins: vin0 {
572 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
573 function = "vin0";
574 };
575
576 vin1_pins: vin1 {
577 groups = "vin1_data8", "vin1_clk";
578 function = "vin1";
579 };
580};
581
582ðer {
583 pinctrl-0 = <ðer_pins &phy1_pins>;
584 pinctrl-names = "default";
585
586 phy-handle = <&phy1>;
587 renesas,ether-link-active-low;
588 status = "okay";
589
590 phy1: ethernet-phy@1 {
591 reg = <1>;
592 interrupt-parent = <&irqc0>;
593 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
594 micrel,led-mode = <1>;
595 };
596};
597
598&cmt0 {
599 status = "okay";
600};
601
602&scif0 {
603 pinctrl-0 = <&scif0_pins>;
604 pinctrl-names = "default";
605
606 status = "okay";
607};
608
609&scif1 {
610 pinctrl-0 = <&scif1_pins>;
611 pinctrl-names = "default";
612
613 status = "okay";
614};
615
616&scif_clk {
617 clock-frequency = <14745600>;
618};
619
620&sdhi0 {
621 pinctrl-0 = <&sdhi0_pins>;
622 pinctrl-1 = <&sdhi0_pins_uhs>;
623 pinctrl-names = "default", "state_uhs";
624
625 vmmc-supply = <&vcc_sdhi0>;
626 vqmmc-supply = <&vccq_sdhi0>;
627 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
628 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
629 sd-uhs-sdr50;
630 sd-uhs-sdr104;
631 status = "okay";
632};
633
634&sdhi1 {
635 pinctrl-0 = <&sdhi1_pins>;
636 pinctrl-1 = <&sdhi1_pins_uhs>;
637 pinctrl-names = "default", "state_uhs";
638
639 vmmc-supply = <&vcc_sdhi1>;
640 vqmmc-supply = <&vccq_sdhi1>;
641 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
642 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
643 sd-uhs-sdr50;
644 status = "okay";
645};
646
647&sdhi2 {
648 pinctrl-0 = <&sdhi2_pins>;
649 pinctrl-1 = <&sdhi2_pins_uhs>;
650 pinctrl-names = "default", "state_uhs";
651
652 vmmc-supply = <&vcc_sdhi2>;
653 vqmmc-supply = <&vccq_sdhi2>;
654 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
655 sd-uhs-sdr50;
656 status = "okay";
657};
658
659&qspi {
660 pinctrl-0 = <&qspi_pins>;
661 pinctrl-names = "default";
662
663 status = "okay";
664
665 flash@0 {
666 compatible = "spansion,s25fl512s", "jedec,spi-nor";
667 reg = <0>;
668 spi-max-frequency = <30000000>;
669 spi-tx-bus-width = <4>;
670 spi-rx-bus-width = <4>;
671 spi-cpol;
672 spi-cpha;
673 m25p,fast-read;
674
675 partitions {
676 compatible = "fixed-partitions";
677 #address-cells = <1>;
678 #size-cells = <1>;
679
680 partition@0 {
681 label = "loader";
682 reg = <0x00000000 0x00040000>;
683 read-only;
684 };
685 partition@40000 {
686 label = "user";
687 reg = <0x00040000 0x00400000>;
688 read-only;
689 };
690 partition@440000 {
691 label = "flash";
692 reg = <0x00440000 0x03bc0000>;
693 };
694 };
695 };
696};
697
698&i2c2 {
699 pinctrl-0 = <&i2c2_pins>;
700 pinctrl-names = "i2c-hdmi";
701
702 status = "okay";
703 clock-frequency = <100000>;
704
705};
706
707&i2c6 {
708 status = "okay";
709 clock-frequency = <100000>;
710
711 pmic@58 {
712 compatible = "dlg,da9063";
713 reg = <0x58>;
714 interrupt-parent = <&irqc0>;
715 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
716 interrupt-controller;
717
718 rtc {
719 compatible = "dlg,da9063-rtc";
720 };
721
722 wdt {
723 compatible = "dlg,da9063-watchdog";
724 };
725 };
726};
727
728&i2c4 {
729 pinctrl-0 = <&i2c4_pins>;
730 pinctrl-names = "i2c-exio4";
731};
732
733&rcar_sound {
734 pinctrl-0 = <&sound_pins &sound_clk_pins>;
735 pinctrl-names = "default";
736
737 /* Single DAI */
738 #sound-dai-cells = <0>;
739
740 status = "okay";
741
742 rcar_sound,dai {
743 dai0 {
744 playback = <&ssi0 &src2 &dvc0>;
745 capture = <&ssi1 &src3 &dvc1>;
746 };
747 };
748};
749
750&ssi1 {
751 shared-pin;
752};
753
754/* HDMI video input */
755&vin0 {
756 status = "okay";
757 pinctrl-0 = <&vin0_pins>;
758 pinctrl-names = "default";
759
760 port {
761 #address-cells = <1>;
762 #size-cells = <0>;
763
764 vin0ep2: endpoint {
765 remote-endpoint = <&adv7612_out>;
766 bus-width = <24>;
767 hsync-active = <0>;
768 vsync-active = <0>;
769 pclk-sample = <1>;
770 data-active = <1>;
771 };
772 };
773};
774
775/* composite video input */
776&vin1 {
777 pinctrl-0 = <&vin1_pins>;
778 pinctrl-names = "default";
779
780 status = "okay";
781
782 port {
783 #address-cells = <1>;
784 #size-cells = <0>;
785
786 vin1ep: endpoint {
787 remote-endpoint = <&adv7180_out>;
788 bus-width = <8>;
789 };
790 };
791};