1// SPDX-License-Identifier: GPL-2.0-or-later
 2/*
 3 * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
 4 * and Markus Pargmann, Pengutronix
 
 
 
 
 
 
 
 5 */
 6
 7/dts-v1/;
 8#include "imx27.dtsi"
 9
10/ {
11	model = "Phytec pca100";
12	compatible = "phytec,imx27-pca100", "fsl,imx27";
13
14	memory@a0000000 {
15		device_type = "memory";
16		reg = <0xa0000000 0x08000000>; /* 128MB */
17	};
18};
19
20&cspi1 {
21	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
22		   <&gpio4 27 GPIO_ACTIVE_LOW>;
23	status = "okay";
24};
25
26&fec {
27	pinctrl-names = "default";
28	pinctrl-0 = <&pinctrl_fec1>;
29	status = "okay";
30};
31
32&i2c2 {
33	pinctrl-names = "default";
34	pinctrl-0 = <&pinctrl_i2c2>;
35	status = "okay";
36
37	at24@52 {
38		compatible = "atmel,24c32";
39		pagesize = <32>;
40		reg = <0x52>;
41	};
42};
43
44&iomuxc {
45	imx27-phycard-s-som {
46		pinctrl_fec1: fec1grp {
47			fsl,pins = <
48				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
49				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
50				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
51				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
52				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
53				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
54				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
55				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
56				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
57				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
58				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
59				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
60				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
61				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
62				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
63				MX27_PAD_ATA_DATA13__FEC_COL 0x0
64				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
65				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
66			>;
67		};
68
69		pinctrl_i2c2: i2c2grp {
70			fsl,pins = <
71				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
72				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
73			>;
74		};
75
76		pinctrl_nfc: nfcgrp {
77			fsl,pins = <
78				MX27_PAD_NFRB__NFRB 0x0
79				MX27_PAD_NFCLE__NFCLE 0x0
80				MX27_PAD_NFWP_B__NFWP_B 0x0
81				MX27_PAD_NFCE_B__NFCE_B 0x0
82				MX27_PAD_NFALE__NFALE 0x0
83				MX27_PAD_NFRE_B__NFRE_B 0x0
84				MX27_PAD_NFWE_B__NFWE_B 0x0
85			>;
86		};
87	};
88};
89
90&nfc {
91	pinctrl-names = "default";
92	pinctrl-0 = <&pinctrl_nfc>;
93	nand-bus-width = <8>;
94	nand-ecc-mode = "hw";
95	nand-on-flash-bbt;
96	status = "okay";
97};

 
  1/*
  2 * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
  3 * and Markus Pargmann, Pengutronix
  4 *
  5 * The code contained herein is licensed under the GNU General Public
  6 * License. You may obtain a copy of the GNU General Public License
  7 * Version 2 or later at the following locations:
  8 *
  9 * http://www.opensource.org/licenses/gpl-license.html
 10 * http://www.gnu.org/copyleft/gpl.html
 11 */
 12
 13/dts-v1/;
 14#include "imx27.dtsi"
 15
 16/ {
 17	model = "Phytec pca100";
 18	compatible = "phytec,imx27-pca100", "fsl,imx27";
 19
 20	memory@a0000000 {
 
 21		reg = <0xa0000000 0x08000000>; /* 128MB */
 22	};
 23};
 24
 25&cspi1 {
 26	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
 27		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
 28	status = "okay";
 29};
 30
 31&fec {
 32	pinctrl-names = "default";
 33	pinctrl-0 = <&pinctrl_fec1>;
 34	status = "okay";
 35};
 36
 37&i2c2 {
 38	pinctrl-names = "default";
 39	pinctrl-0 = <&pinctrl_i2c2>;
 40	status = "okay";
 41
 42	at24@52 {
 43		compatible = "atmel,24c32";
 44		pagesize = <32>;
 45		reg = <0x52>;
 46	};
 47};
 48
 49&iomuxc {
 50	imx27-phycard-s-som {
 51		pinctrl_fec1: fec1grp {
 52			fsl,pins = <
 53				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
 54				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
 55				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
 56				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
 57				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
 58				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
 59				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
 60				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
 61				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
 62				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
 63				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
 64				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
 65				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
 66				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
 67				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
 68				MX27_PAD_ATA_DATA13__FEC_COL 0x0
 69				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
 70				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
 71			>;
 72		};
 73
 74		pinctrl_i2c2: i2c2grp {
 75			fsl,pins = <
 76				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
 77				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
 78			>;
 79		};
 80
 81		pinctrl_nfc: nfcgrp {
 82			fsl,pins = <
 83				MX27_PAD_NFRB__NFRB 0x0
 84				MX27_PAD_NFCLE__NFCLE 0x0
 85				MX27_PAD_NFWP_B__NFWP_B 0x0
 86				MX27_PAD_NFCE_B__NFCE_B 0x0
 87				MX27_PAD_NFALE__NFALE 0x0
 88				MX27_PAD_NFRE_B__NFRE_B 0x0
 89				MX27_PAD_NFWE_B__NFWE_B 0x0
 90			>;
 91		};
 92	};
 93};
 94
 95&nfc {
 96	pinctrl-names = "default";
 97	pinctrl-0 = <&pinctrl_nfc>;
 98	nand-bus-width = <8>;
 99	nand-ecc-mode = "hw";
100	nand-on-flash-bbt;
101	status = "okay";
102};