Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Broadcom BCM470X / BCM5301X ARM platform code.
4 * DTS for D-Link DIR-885L
5 *
6 * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
7 */
8
9/dts-v1/;
10
11#include "bcm47094.dtsi"
12#include "bcm5301x-nand-cs0-bch1.dtsi"
13
14/ {
15 compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
16 model = "D-Link DIR-885L";
17
18 chosen {
19 bootargs = "console=ttyS0,115200 earlycon";
20 };
21
22 memory@0 {
23 device_type = "memory";
24 reg = <0x00000000 0x08000000>,
25 <0x88000000 0x08000000>;
26 };
27
28 nand_controller: nand-controller@18028000 {
29 nand@0 {
30 partitions {
31 compatible = "fixed-partitions";
32 #address-cells = <1>;
33 #size-cells = <1>;
34
35 partition@0 {
36 label = "firmware";
37 reg = <0x00000000 0x08000000>;
38 };
39 };
40 };
41 };
42
43 leds {
44 compatible = "gpio-leds";
45
46 power-white {
47 label = "bcm53xx:white:power";
48 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "default-on";
50 };
51
52 wan-white {
53 label = "bcm53xx:white:wan";
54 gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
55 };
56
57 power-amber {
58 label = "bcm53xx:amber:power";
59 gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
60 };
61
62 wan-amber {
63 label = "bcm53xx:amber:wan";
64 gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
65 };
66
67 usb3-white {
68 label = "bcm53xx:white:usb3";
69 gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
70 trigger-sources = <&ohci_port1>, <&ehci_port1>,
71 <&xhci_port1>;
72 linux,default-trigger = "usbport";
73 };
74
75 2ghz {
76 label = "bcm53xx:white:2ghz";
77 gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
78 };
79
80 5ghz {
81 label = "bcm53xx:white:5ghz";
82 gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
83 };
84 };
85
86 gpio-keys {
87 compatible = "gpio-keys";
88
89 wps {
90 label = "WPS";
91 linux,code = <KEY_WPS_BUTTON>;
92 gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
93 };
94
95 /* Switch: router / extender */
96 extender {
97 label = "Extender";
98 linux,code = <BTN_0>;
99 gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
100 };
101
102 restart {
103 label = "Reset";
104 linux,code = <KEY_RESTART>;
105 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
106 };
107 };
108};
109
110&usb3 {
111 vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
112};
113
114&spi_nor {
115 status = "okay";
116};
117
118&usb3_phy {
119 status = "okay";
120};
1/*
2 * Broadcom BCM470X / BCM5301X ARM platform code.
3 * DTS for D-Link DIR-885L
4 *
5 * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
6 *
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
10 *
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
12 * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
13 * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
14 * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
15 * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
16 * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
17 * PERFORMANCE OF THIS SOFTWARE.
18 */
19
20/dts-v1/;
21
22#include "bcm47094.dtsi"
23#include "bcm5301x-nand-cs0-bch1.dtsi"
24
25/ {
26 compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
27 model = "D-Link DIR-885L";
28
29 chosen {
30 bootargs = "console=ttyS0,115200 earlycon";
31 };
32
33 memory {
34 reg = <0x00000000 0x08000000
35 0x88000000 0x08000000>;
36 };
37
38 nand: nand@18028000 {
39 nandcs@0 {
40 partition@0 {
41 label = "firmware";
42 reg = <0x00000000 0x08000000>;
43 };
44 };
45 };
46
47 leds {
48 compatible = "gpio-leds";
49
50 power-white {
51 label = "bcm53xx:white:power";
52 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
53 linux,default-trigger = "default-on";
54 };
55
56 wan-white {
57 label = "bcm53xx:white:wan";
58 gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
59 };
60
61 power-amber {
62 label = "bcm53xx:amber:power";
63 gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
64 };
65
66 wan-amber {
67 label = "bcm53xx:amber:wan";
68 gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
69 };
70
71 usb3-white {
72 label = "bcm53xx:white:usb3";
73 gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
74 trigger-sources = <&ohci_port1>, <&ehci_port1>,
75 <&xhci_port1>;
76 linux,default-trigger = "usbport";
77 };
78
79 2ghz {
80 label = "bcm53xx:white:2ghz";
81 gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
82 };
83
84 5ghz {
85 label = "bcm53xx:white:5ghz";
86 gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
87 };
88 };
89
90 gpio-keys {
91 compatible = "gpio-keys";
92 #address-cells = <1>;
93 #size-cells = <0>;
94
95 wps {
96 label = "WPS";
97 linux,code = <KEY_WPS_BUTTON>;
98 gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
99 };
100
101 /* Switch: router / extender */
102 extender {
103 label = "Extender";
104 linux,code = <BTN_0>;
105 gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
106 };
107
108 restart {
109 label = "Reset";
110 linux,code = <KEY_RESTART>;
111 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
112 };
113 };
114};
115
116&usb3 {
117 vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
118};
119
120&spi_nor {
121 status = "okay";
122};