1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
 
 
 
 
 4 */
 5
 6#include "am57xx-beagle-x15-common.dtsi"
 7
 8/ {
 9	/* NOTE: This describes the "original" pre-production A2 revision */
10	model = "TI AM5728 BeagleBoard-X15";
11};
12
13&tpd12s015 {
14	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
15		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
16		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
17};
18
19&mmc1 {
20	pinctrl-names = "default", "hs";
21	pinctrl-0 = <&mmc1_pins_default>;
22	pinctrl-1 = <&mmc1_pins_hs>;
23
24	vmmc-supply = <&ldo1_reg>;
25	no-1-8-v;
26};
27
28&mmc2 {
29	pinctrl-names = "default", "hs", "ddr_3_3v";
30	pinctrl-0 = <&mmc2_pins_default>;
31	pinctrl-1 = <&mmc2_pins_hs>;
32	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
33};
34
35/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
36&phy1 {
37	max-speed = <100>;
38};

 
 1/*
 2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
 3 *
 4 * This program is free software; you can redistribute it and/or modify
 5 * it under the terms of the GNU General Public License version 2 as
 6 * published by the Free Software Foundation.
 7 */
 8
 9#include "am57xx-beagle-x15-common.dtsi"
10
11/ {
12	/* NOTE: This describes the "original" pre-production A2 revision */
13	model = "TI AM5728 BeagleBoard-X15";
14};
15
16&tpd12s015 {
17	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
18		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
19		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
20};
21
22&mmc1 {
23	pinctrl-names = "default", "hs";
24	pinctrl-0 = <&mmc1_pins_default>;
25	pinctrl-1 = <&mmc1_pins_hs>;
26
27	vmmc-supply = <&ldo1_reg>;
 
28};
29
30&mmc2 {
31	pinctrl-names = "default", "hs", "ddr_1_8v";
32	pinctrl-0 = <&mmc2_pins_default>;
33	pinctrl-1 = <&mmc2_pins_hs>;
34	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
35};
36
37/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
38&phy1 {
39	max-speed = <100>;
40};