1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
 
 
 
 
 4 */
 5
 6/*
 7 * VScom OnRISC
 8 * http://www.vscom.de
 9 */
10
11/dts-v1/;
12
13#include "am335x-baltos.dtsi"
14#include "am335x-baltos-leds.dtsi"
15
16/ {
17	model = "OnRISC Baltos iR 2110";
18};
19
20&am33xx_pinmux {
21	uart1_pins: pinmux_uart1_pins {
22		pinctrl-single,pins = <
23			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
24			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
25			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
26			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
27			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
28			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
29			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
30			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
31		>;
32	};
33
34	mmc1_pins: pinmux_mmc1_pins {
35		pinctrl-single,pins = <
36			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
37		>;
38	};
39};
40
41&uart1 {
42	pinctrl-names = "default";
43	pinctrl-0 = <&uart1_pins>;
44	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
45	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
46	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
47	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
48
49	status = "okay";
50};
51
52&usb0_phy {
53	status = "okay";
54};
55
56&usb0 {
57	status = "okay";
58	dr_mode = "host";
59};
60
61&davinci_mdio {
62	phy0: ethernet-phy@0 {
63		reg = <1>;
64	};
65};
66
67&cpsw_emac0 {
68	phy-mode = "rmii";
69	dual_emac_res_vlan = <1>;
70	phy-handle = <&phy0>;
71};
72
73&cpsw_emac1 {
74	phy-mode = "rgmii-id";
75	dual_emac_res_vlan = <2>;
76	phy-handle = <&phy1>;
77};
78
79&mmc1 {
80	pinctrl-names = "default";
81	pinctrl-0 = <&mmc1_pins>;
82	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
83};

 
 1/*
 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 3 *
 4 * This program is free software; you can redistribute it and/or modify
 5 * it under the terms of the GNU General Public License version 2 as
 6 * published by the Free Software Foundation.
 7 */
 8
 9/*
10 * VScom OnRISC
11 * http://www.vscom.de
12 */
13
14/dts-v1/;
15
16#include "am335x-baltos.dtsi"
17#include "am335x-baltos-leds.dtsi"
18
19/ {
20	model = "OnRISC Baltos iR 2110";
21};
22
23&am33xx_pinmux {
24	uart1_pins: pinmux_uart1_pins {
25		pinctrl-single,pins = <
26			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
27			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
28			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
29			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
30			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
31			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
32			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
33			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 
 
 
 
 
 
34		>;
35	};
36};
37
38&uart1 {
39	pinctrl-names = "default";
40	pinctrl-0 = <&uart1_pins>;
41	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
42	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
43	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
44	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
45
46	status = "okay";
47};
48
49&usb0_phy {
50	status = "okay";
51};
52
53&usb0 {
54	status = "okay";
55	dr_mode = "host";
56};
57
58&davinci_mdio {
59	phy0: ethernet-phy@0 {
60		reg = <1>;
61	};
62};
63
64&cpsw_emac0 {
65	phy-mode = "rmii";
66	dual_emac_res_vlan = <1>;
67	phy-handle = <&phy0>;
68};
69
70&cpsw_emac1 {
71	phy-mode = "rgmii-txid";
72	dual_emac_res_vlan = <2>;
73	phy-handle = <&phy1>;
74};
75
76&phy_sel {
77	rmii-clock-ext = <1>;
 
 
78};