Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Line 6 Linux USB driver
4 *
5 * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
6 */
7
8#include <linux/slab.h>
9#include <linux/wait.h>
10#include <linux/interrupt.h>
11#include <linux/module.h>
12#include <linux/usb.h>
13
14#include <sound/core.h>
15#include <sound/control.h>
16
17#include "capture.h"
18#include "driver.h"
19#include "playback.h"
20
21/*
22 Locate name in binary program dump
23*/
24#define POD_NAME_OFFSET 0
25#define POD_NAME_LENGTH 16
26
27/*
28 Other constants
29*/
30#define POD_CONTROL_SIZE 0x80
31#define POD_BUFSIZE_DUMPREQ 7
32#define POD_STARTUP_DELAY 1000
33
34/*
35 Stages of POD startup procedure
36*/
37enum {
38 POD_STARTUP_VERSIONREQ,
39 POD_STARTUP_SETUP,
40 POD_STARTUP_DONE,
41};
42
43enum {
44 LINE6_BASSPODXT,
45 LINE6_BASSPODXTLIVE,
46 LINE6_BASSPODXTPRO,
47 LINE6_POCKETPOD,
48 LINE6_PODXT,
49 LINE6_PODXTLIVE_POD,
50 LINE6_PODXTPRO,
51};
52
53struct usb_line6_pod {
54 /* Generic Line 6 USB data */
55 struct usb_line6 line6;
56
57 /* Instrument monitor level */
58 int monitor_level;
59
60 /* Current progress in startup procedure */
61 int startup_progress;
62
63 /* Serial number of device */
64 u32 serial_number;
65
66 /* Firmware version (x 100) */
67 int firmware_version;
68
69 /* Device ID */
70 int device_id;
71};
72
73#define line6_to_pod(x) container_of(x, struct usb_line6_pod, line6)
74
75#define POD_SYSEX_CODE 3
76
77/* *INDENT-OFF* */
78
79enum {
80 POD_SYSEX_SAVE = 0x24,
81 POD_SYSEX_SYSTEM = 0x56,
82 POD_SYSEX_SYSTEMREQ = 0x57,
83 /* POD_SYSEX_UPDATE = 0x6c, */ /* software update! */
84 POD_SYSEX_STORE = 0x71,
85 POD_SYSEX_FINISH = 0x72,
86 POD_SYSEX_DUMPMEM = 0x73,
87 POD_SYSEX_DUMP = 0x74,
88 POD_SYSEX_DUMPREQ = 0x75
89
90 /* dumps entire internal memory of PODxt Pro */
91 /* POD_SYSEX_DUMPMEM2 = 0x76 */
92};
93
94enum {
95 POD_MONITOR_LEVEL = 0x04,
96 POD_SYSTEM_INVALID = 0x10000
97};
98
99/* *INDENT-ON* */
100
101enum {
102 POD_DUMP_MEMORY = 2
103};
104
105enum {
106 POD_BUSY_READ,
107 POD_BUSY_WRITE,
108 POD_CHANNEL_DIRTY,
109 POD_SAVE_PRESSED,
110 POD_BUSY_MIDISEND
111};
112
113static const struct snd_ratden pod_ratden = {
114 .num_min = 78125,
115 .num_max = 78125,
116 .num_step = 1,
117 .den = 2
118};
119
120static struct line6_pcm_properties pod_pcm_properties = {
121 .playback_hw = {
122 .info = (SNDRV_PCM_INFO_MMAP |
123 SNDRV_PCM_INFO_INTERLEAVED |
124 SNDRV_PCM_INFO_BLOCK_TRANSFER |
125 SNDRV_PCM_INFO_MMAP_VALID |
126 SNDRV_PCM_INFO_PAUSE |
127 SNDRV_PCM_INFO_SYNC_START),
128 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
129 .rates = SNDRV_PCM_RATE_KNOT,
130 .rate_min = 39062,
131 .rate_max = 39063,
132 .channels_min = 2,
133 .channels_max = 2,
134 .buffer_bytes_max = 60000,
135 .period_bytes_min = 64,
136 .period_bytes_max = 8192,
137 .periods_min = 1,
138 .periods_max = 1024},
139 .capture_hw = {
140 .info = (SNDRV_PCM_INFO_MMAP |
141 SNDRV_PCM_INFO_INTERLEAVED |
142 SNDRV_PCM_INFO_BLOCK_TRANSFER |
143 SNDRV_PCM_INFO_MMAP_VALID |
144 SNDRV_PCM_INFO_SYNC_START),
145 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
146 .rates = SNDRV_PCM_RATE_KNOT,
147 .rate_min = 39062,
148 .rate_max = 39063,
149 .channels_min = 2,
150 .channels_max = 2,
151 .buffer_bytes_max = 60000,
152 .period_bytes_min = 64,
153 .period_bytes_max = 8192,
154 .periods_min = 1,
155 .periods_max = 1024},
156 .rates = {
157 .nrats = 1,
158 .rats = &pod_ratden},
159 .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
160};
161
162static const char pod_version_header[] = {
163 0xf2, 0x7e, 0x7f, 0x06, 0x02
164};
165
166static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
167 int size)
168{
169 return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
170 size);
171}
172
173/*
174 Process a completely received message.
175*/
176static void line6_pod_process_message(struct usb_line6 *line6)
177{
178 struct usb_line6_pod *pod = line6_to_pod(line6);
179 const unsigned char *buf = pod->line6.buffer_message;
180
181 if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
182 pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
183 pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
184 (int) buf[10];
185 if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
186 pod->startup_progress = POD_STARTUP_SETUP;
187 schedule_delayed_work(&line6->startup_work, 0);
188 }
189 return;
190 }
191
192 /* Only look for sysex messages from this device */
193 if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
194 buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
195 return;
196 }
197 if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
198 return;
199
200 if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
201 short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
202 ((int)buf[9] << 4) | (int)buf[10];
203 pod->monitor_level = value;
204 }
205}
206
207/*
208 Send system parameter (from integer).
209*/
210static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
211 int code)
212{
213 char *sysex;
214 static const int size = 5;
215
216 sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
217 if (!sysex)
218 return -ENOMEM;
219 sysex[SYSEX_DATA_OFS] = code;
220 sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
221 sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
222 sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
223 sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
224 line6_send_sysex_message(&pod->line6, sysex, size);
225 kfree(sysex);
226 return 0;
227}
228
229/*
230 "read" request on "serial_number" special file.
231*/
232static ssize_t serial_number_show(struct device *dev,
233 struct device_attribute *attr, char *buf)
234{
235 struct snd_card *card = dev_to_snd_card(dev);
236 struct usb_line6_pod *pod = card->private_data;
237
238 return sprintf(buf, "%u\n", pod->serial_number);
239}
240
241/*
242 "read" request on "firmware_version" special file.
243*/
244static ssize_t firmware_version_show(struct device *dev,
245 struct device_attribute *attr, char *buf)
246{
247 struct snd_card *card = dev_to_snd_card(dev);
248 struct usb_line6_pod *pod = card->private_data;
249
250 return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100,
251 pod->firmware_version % 100);
252}
253
254/*
255 "read" request on "device_id" special file.
256*/
257static ssize_t device_id_show(struct device *dev,
258 struct device_attribute *attr, char *buf)
259{
260 struct snd_card *card = dev_to_snd_card(dev);
261 struct usb_line6_pod *pod = card->private_data;
262
263 return sprintf(buf, "%d\n", pod->device_id);
264}
265
266/*
267 POD startup procedure.
268 This is a sequence of functions with special requirements (e.g., must
269 not run immediately after initialization, must not run in interrupt
270 context). After the last one has finished, the device is ready to use.
271*/
272
273static void pod_startup(struct usb_line6 *line6)
274{
275 struct usb_line6_pod *pod = line6_to_pod(line6);
276
277 switch (pod->startup_progress) {
278 case POD_STARTUP_VERSIONREQ:
279 /* request firmware version: */
280 line6_version_request_async(line6);
281 break;
282 case POD_STARTUP_SETUP:
283 /* serial number: */
284 line6_read_serial_number(&pod->line6, &pod->serial_number);
285
286 /* ALSA audio interface: */
287 if (snd_card_register(line6->card))
288 dev_err(line6->ifcdev, "Failed to register POD card.\n");
289 pod->startup_progress = POD_STARTUP_DONE;
290 break;
291 default:
292 break;
293 }
294}
295
296/* POD special files: */
297static DEVICE_ATTR_RO(device_id);
298static DEVICE_ATTR_RO(firmware_version);
299static DEVICE_ATTR_RO(serial_number);
300
301static struct attribute *pod_dev_attrs[] = {
302 &dev_attr_device_id.attr,
303 &dev_attr_firmware_version.attr,
304 &dev_attr_serial_number.attr,
305 NULL
306};
307
308static const struct attribute_group pod_dev_attr_group = {
309 .name = "pod",
310 .attrs = pod_dev_attrs,
311};
312
313/* control info callback */
314static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
315 struct snd_ctl_elem_info *uinfo)
316{
317 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
318 uinfo->count = 1;
319 uinfo->value.integer.min = 0;
320 uinfo->value.integer.max = 65535;
321 return 0;
322}
323
324/* control get callback */
325static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
326 struct snd_ctl_elem_value *ucontrol)
327{
328 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
329 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
330
331 ucontrol->value.integer.value[0] = pod->monitor_level;
332 return 0;
333}
334
335/* control put callback */
336static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
337 struct snd_ctl_elem_value *ucontrol)
338{
339 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
340 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
341
342 if (ucontrol->value.integer.value[0] == pod->monitor_level)
343 return 0;
344
345 pod->monitor_level = ucontrol->value.integer.value[0];
346 pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
347 POD_MONITOR_LEVEL);
348 return 1;
349}
350
351/* control definition */
352static const struct snd_kcontrol_new pod_control_monitor = {
353 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
354 .name = "Monitor Playback Volume",
355 .index = 0,
356 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
357 .info = snd_pod_control_monitor_info,
358 .get = snd_pod_control_monitor_get,
359 .put = snd_pod_control_monitor_put
360};
361
362/*
363 Try to init POD device.
364*/
365static int pod_init(struct usb_line6 *line6,
366 const struct usb_device_id *id)
367{
368 int err;
369 struct usb_line6_pod *pod = line6_to_pod(line6);
370
371 line6->process_message = line6_pod_process_message;
372 line6->startup = pod_startup;
373
374 /* create sysfs entries: */
375 err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
376 if (err < 0)
377 return err;
378
379 /* initialize PCM subsystem: */
380 err = line6_init_pcm(line6, &pod_pcm_properties);
381 if (err < 0)
382 return err;
383
384 /* register monitor control: */
385 err = snd_ctl_add(line6->card,
386 snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
387 if (err < 0)
388 return err;
389
390 /*
391 When the sound card is registered at this point, the PODxt Live
392 displays "Invalid Code Error 07", so we do it later in the event
393 handler.
394 */
395
396 if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
397 pod->monitor_level = POD_SYSTEM_INVALID;
398
399 /* initiate startup procedure: */
400 schedule_delayed_work(&line6->startup_work,
401 msecs_to_jiffies(POD_STARTUP_DELAY));
402 }
403
404 return 0;
405}
406
407#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
408#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
409
410/* table of devices that work with this driver */
411static const struct usb_device_id pod_id_table[] = {
412 { LINE6_DEVICE(0x4250), .driver_info = LINE6_BASSPODXT },
413 { LINE6_DEVICE(0x4642), .driver_info = LINE6_BASSPODXTLIVE },
414 { LINE6_DEVICE(0x4252), .driver_info = LINE6_BASSPODXTPRO },
415 { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
416 { LINE6_DEVICE(0x5044), .driver_info = LINE6_PODXT },
417 { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
418 { LINE6_DEVICE(0x5050), .driver_info = LINE6_PODXTPRO },
419 {}
420};
421
422MODULE_DEVICE_TABLE(usb, pod_id_table);
423
424static const struct line6_properties pod_properties_table[] = {
425 [LINE6_BASSPODXT] = {
426 .id = "BassPODxt",
427 .name = "BassPODxt",
428 .capabilities = LINE6_CAP_CONTROL
429 | LINE6_CAP_CONTROL_MIDI
430 | LINE6_CAP_PCM
431 | LINE6_CAP_HWMON,
432 .altsetting = 5,
433 .ep_ctrl_r = 0x84,
434 .ep_ctrl_w = 0x03,
435 .ep_audio_r = 0x82,
436 .ep_audio_w = 0x01,
437 },
438 [LINE6_BASSPODXTLIVE] = {
439 .id = "BassPODxtLive",
440 .name = "BassPODxt Live",
441 .capabilities = LINE6_CAP_CONTROL
442 | LINE6_CAP_CONTROL_MIDI
443 | LINE6_CAP_PCM
444 | LINE6_CAP_HWMON,
445 .altsetting = 1,
446 .ep_ctrl_r = 0x84,
447 .ep_ctrl_w = 0x03,
448 .ep_audio_r = 0x82,
449 .ep_audio_w = 0x01,
450 },
451 [LINE6_BASSPODXTPRO] = {
452 .id = "BassPODxtPro",
453 .name = "BassPODxt Pro",
454 .capabilities = LINE6_CAP_CONTROL
455 | LINE6_CAP_CONTROL_MIDI
456 | LINE6_CAP_PCM
457 | LINE6_CAP_HWMON,
458 .altsetting = 5,
459 .ep_ctrl_r = 0x84,
460 .ep_ctrl_w = 0x03,
461 .ep_audio_r = 0x82,
462 .ep_audio_w = 0x01,
463 },
464 [LINE6_POCKETPOD] = {
465 .id = "PocketPOD",
466 .name = "Pocket POD",
467 .capabilities = LINE6_CAP_CONTROL
468 | LINE6_CAP_CONTROL_MIDI,
469 .altsetting = 0,
470 .ep_ctrl_r = 0x82,
471 .ep_ctrl_w = 0x02,
472 /* no audio channel */
473 },
474 [LINE6_PODXT] = {
475 .id = "PODxt",
476 .name = "PODxt",
477 .capabilities = LINE6_CAP_CONTROL
478 | LINE6_CAP_CONTROL_MIDI
479 | LINE6_CAP_PCM
480 | LINE6_CAP_HWMON,
481 .altsetting = 5,
482 .ep_ctrl_r = 0x84,
483 .ep_ctrl_w = 0x03,
484 .ep_audio_r = 0x82,
485 .ep_audio_w = 0x01,
486 },
487 [LINE6_PODXTLIVE_POD] = {
488 .id = "PODxtLive",
489 .name = "PODxt Live",
490 .capabilities = LINE6_CAP_CONTROL
491 | LINE6_CAP_CONTROL_MIDI
492 | LINE6_CAP_PCM
493 | LINE6_CAP_HWMON,
494 .altsetting = 1,
495 .ep_ctrl_r = 0x84,
496 .ep_ctrl_w = 0x03,
497 .ep_audio_r = 0x82,
498 .ep_audio_w = 0x01,
499 },
500 [LINE6_PODXTPRO] = {
501 .id = "PODxtPro",
502 .name = "PODxt Pro",
503 .capabilities = LINE6_CAP_CONTROL
504 | LINE6_CAP_CONTROL_MIDI
505 | LINE6_CAP_PCM
506 | LINE6_CAP_HWMON,
507 .altsetting = 5,
508 .ep_ctrl_r = 0x84,
509 .ep_ctrl_w = 0x03,
510 .ep_audio_r = 0x82,
511 .ep_audio_w = 0x01,
512 },
513};
514
515/*
516 Probe USB device.
517*/
518static int pod_probe(struct usb_interface *interface,
519 const struct usb_device_id *id)
520{
521 return line6_probe(interface, id, "Line6-POD",
522 &pod_properties_table[id->driver_info],
523 pod_init, sizeof(struct usb_line6_pod));
524}
525
526static struct usb_driver pod_driver = {
527 .name = KBUILD_MODNAME,
528 .probe = pod_probe,
529 .disconnect = line6_disconnect,
530#ifdef CONFIG_PM
531 .suspend = line6_suspend,
532 .resume = line6_resume,
533 .reset_resume = line6_resume,
534#endif
535 .id_table = pod_id_table,
536};
537
538module_usb_driver(pod_driver);
539
540MODULE_DESCRIPTION("Line 6 POD USB driver");
541MODULE_LICENSE("GPL");