Linux Audio

Check our new training course

Loading...
v5.14.15
   1/* SPDX-License-Identifier: GPL-2.0-or-later */
   2/*
   3 *  Boot code and exception vectors for Book3E processors
   4 *
   5 *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
 
 
 
 
 
   6 */
   7
   8#include <linux/threads.h>
   9#include <asm/reg.h>
  10#include <asm/page.h>
  11#include <asm/ppc_asm.h>
  12#include <asm/asm-offsets.h>
  13#include <asm/cputable.h>
  14#include <asm/setup.h>
  15#include <asm/thread_info.h>
  16#include <asm/reg_a2.h>
  17#include <asm/exception-64e.h>
  18#include <asm/bug.h>
  19#include <asm/irqflags.h>
  20#include <asm/ptrace.h>
  21#include <asm/ppc-opcode.h>
  22#include <asm/mmu.h>
  23#include <asm/hw_irq.h>
  24#include <asm/kvm_asm.h>
  25#include <asm/kvm_booke_hv_asm.h>
  26#include <asm/feature-fixups.h>
  27#include <asm/context_tracking.h>
  28
  29/* 64e interrupt returns always use SRR registers */
  30#define fast_interrupt_return fast_interrupt_return_srr
  31#define interrupt_return interrupt_return_srr
  32
  33/* XXX This will ultimately add space for a special exception save
  34 *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
  35 *     when taking special interrupts. For now we don't support that,
  36 *     special interrupts from within a non-standard level will probably
  37 *     blow you up
  38 */
  39#define SPECIAL_EXC_SRR0	0
  40#define SPECIAL_EXC_SRR1	1
  41#define SPECIAL_EXC_SPRG_GEN	2
  42#define SPECIAL_EXC_SPRG_TLB	3
  43#define SPECIAL_EXC_MAS0	4
  44#define SPECIAL_EXC_MAS1	5
  45#define SPECIAL_EXC_MAS2	6
  46#define SPECIAL_EXC_MAS3	7
  47#define SPECIAL_EXC_MAS6	8
  48#define SPECIAL_EXC_MAS7	9
  49#define SPECIAL_EXC_MAS5	10	/* E.HV only */
  50#define SPECIAL_EXC_MAS8	11	/* E.HV only */
  51#define SPECIAL_EXC_IRQHAPPENED	12
  52#define SPECIAL_EXC_DEAR	13
  53#define SPECIAL_EXC_ESR		14
  54#define SPECIAL_EXC_SOFTE	15
  55#define SPECIAL_EXC_CSRR0	16
  56#define SPECIAL_EXC_CSRR1	17
  57/* must be even to keep 16-byte stack alignment */
  58#define SPECIAL_EXC_END		18
  59
  60#define SPECIAL_EXC_FRAME_SIZE	(INT_FRAME_SIZE + SPECIAL_EXC_END * 8)
  61#define SPECIAL_EXC_FRAME_OFFS  (INT_FRAME_SIZE - 288)
  62
  63#define SPECIAL_EXC_STORE(reg, name) \
  64	std	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
  65
  66#define SPECIAL_EXC_LOAD(reg, name) \
  67	ld	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
  68
  69special_reg_save:
  70	/*
  71	 * We only need (or have stack space) to save this stuff if
  72	 * we interrupted the kernel.
  73	 */
  74	ld	r3,_MSR(r1)
  75	andi.	r3,r3,MSR_PR
  76	bnelr
  77
  78	/*
  79	 * Advance to the next TLB exception frame for handler
  80	 * types that don't do it automatically.
  81	 */
  82	LOAD_REG_ADDR(r11,extlb_level_exc)
  83	lwz	r12,0(r11)
  84	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
  85	add	r10,r10,r12
  86	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
  87
  88	/*
  89	 * Save registers needed to allow nesting of certain exceptions
  90	 * (such as TLB misses) inside special exception levels
  91	 */
  92	mfspr	r10,SPRN_SRR0
  93	SPECIAL_EXC_STORE(r10,SRR0)
  94	mfspr	r10,SPRN_SRR1
  95	SPECIAL_EXC_STORE(r10,SRR1)
  96	mfspr	r10,SPRN_SPRG_GEN_SCRATCH
  97	SPECIAL_EXC_STORE(r10,SPRG_GEN)
  98	mfspr	r10,SPRN_SPRG_TLB_SCRATCH
  99	SPECIAL_EXC_STORE(r10,SPRG_TLB)
 100	mfspr	r10,SPRN_MAS0
 101	SPECIAL_EXC_STORE(r10,MAS0)
 102	mfspr	r10,SPRN_MAS1
 103	SPECIAL_EXC_STORE(r10,MAS1)
 104	mfspr	r10,SPRN_MAS2
 105	SPECIAL_EXC_STORE(r10,MAS2)
 106	mfspr	r10,SPRN_MAS3
 107	SPECIAL_EXC_STORE(r10,MAS3)
 108	mfspr	r10,SPRN_MAS6
 109	SPECIAL_EXC_STORE(r10,MAS6)
 110	mfspr	r10,SPRN_MAS7
 111	SPECIAL_EXC_STORE(r10,MAS7)
 112BEGIN_FTR_SECTION
 113	mfspr	r10,SPRN_MAS5
 114	SPECIAL_EXC_STORE(r10,MAS5)
 115	mfspr	r10,SPRN_MAS8
 116	SPECIAL_EXC_STORE(r10,MAS8)
 117
 118	/* MAS5/8 could have inappropriate values if we interrupted KVM code */
 119	li	r10,0
 120	mtspr	SPRN_MAS5,r10
 121	mtspr	SPRN_MAS8,r10
 122END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 123	mfspr	r10,SPRN_DEAR
 124	SPECIAL_EXC_STORE(r10,DEAR)
 125	mfspr	r10,SPRN_ESR
 126	SPECIAL_EXC_STORE(r10,ESR)
 127
 128	ld	r10,_NIP(r1)
 129	SPECIAL_EXC_STORE(r10,CSRR0)
 130	ld	r10,_MSR(r1)
 131	SPECIAL_EXC_STORE(r10,CSRR1)
 132
 133	blr
 134
 135ret_from_level_except:
 136	ld	r3,_MSR(r1)
 137	andi.	r3,r3,MSR_PR
 138	beq	1f
 139	REST_NVGPRS(r1)
 140	b	interrupt_return
 1411:
 142
 143	LOAD_REG_ADDR(r11,extlb_level_exc)
 144	lwz	r12,0(r11)
 145	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
 146	sub	r10,r10,r12
 147	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
 148
 149	/*
 150	 * It's possible that the special level exception interrupted a
 151	 * TLB miss handler, and inserted the same entry that the
 152	 * interrupted handler was about to insert.  On CPUs without TLB
 153	 * write conditional, this can result in a duplicate TLB entry.
 154	 * Wipe all non-bolted entries to be safe.
 155	 *
 156	 * Note that this doesn't protect against any TLB misses
 157	 * we may take accessing the stack from here to the end of
 158	 * the special level exception.  It's not clear how we can
 159	 * reasonably protect against that, but only CPUs with
 160	 * neither TLB write conditional nor bolted kernel memory
 161	 * are affected.  Do any such CPUs even exist?
 162	 */
 163	PPC_TLBILX_ALL(0,R0)
 164
 165	REST_NVGPRS(r1)
 166
 167	SPECIAL_EXC_LOAD(r10,SRR0)
 168	mtspr	SPRN_SRR0,r10
 169	SPECIAL_EXC_LOAD(r10,SRR1)
 170	mtspr	SPRN_SRR1,r10
 171	SPECIAL_EXC_LOAD(r10,SPRG_GEN)
 172	mtspr	SPRN_SPRG_GEN_SCRATCH,r10
 173	SPECIAL_EXC_LOAD(r10,SPRG_TLB)
 174	mtspr	SPRN_SPRG_TLB_SCRATCH,r10
 175	SPECIAL_EXC_LOAD(r10,MAS0)
 176	mtspr	SPRN_MAS0,r10
 177	SPECIAL_EXC_LOAD(r10,MAS1)
 178	mtspr	SPRN_MAS1,r10
 179	SPECIAL_EXC_LOAD(r10,MAS2)
 180	mtspr	SPRN_MAS2,r10
 181	SPECIAL_EXC_LOAD(r10,MAS3)
 182	mtspr	SPRN_MAS3,r10
 183	SPECIAL_EXC_LOAD(r10,MAS6)
 184	mtspr	SPRN_MAS6,r10
 185	SPECIAL_EXC_LOAD(r10,MAS7)
 186	mtspr	SPRN_MAS7,r10
 187BEGIN_FTR_SECTION
 188	SPECIAL_EXC_LOAD(r10,MAS5)
 189	mtspr	SPRN_MAS5,r10
 190	SPECIAL_EXC_LOAD(r10,MAS8)
 191	mtspr	SPRN_MAS8,r10
 192END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 193
 194	SPECIAL_EXC_LOAD(r10,DEAR)
 195	mtspr	SPRN_DEAR,r10
 196	SPECIAL_EXC_LOAD(r10,ESR)
 197	mtspr	SPRN_ESR,r10
 198
 199	stdcx.	r0,0,r1		/* to clear the reservation */
 200
 201	REST_4GPRS(2, r1)
 202	REST_4GPRS(6, r1)
 203
 204	ld	r10,_CTR(r1)
 205	ld	r11,_XER(r1)
 206	mtctr	r10
 207	mtxer	r11
 208
 209	blr
 210
 211.macro ret_from_level srr0 srr1 paca_ex scratch
 212	bl	ret_from_level_except
 213
 214	ld	r10,_LINK(r1)
 215	ld	r11,_CCR(r1)
 216	ld	r0,GPR13(r1)
 217	mtlr	r10
 218	mtcr	r11
 219
 220	ld	r10,GPR10(r1)
 221	ld	r11,GPR11(r1)
 222	ld	r12,GPR12(r1)
 223	mtspr	\scratch,r0
 224
 225	std	r10,\paca_ex+EX_R10(r13);
 226	std	r11,\paca_ex+EX_R11(r13);
 227	ld	r10,_NIP(r1)
 228	ld	r11,_MSR(r1)
 229	ld	r0,GPR0(r1)
 230	ld	r1,GPR1(r1)
 231	mtspr	\srr0,r10
 232	mtspr	\srr1,r11
 233	ld	r10,\paca_ex+EX_R10(r13)
 234	ld	r11,\paca_ex+EX_R11(r13)
 235	mfspr	r13,\scratch
 236.endm
 237
 238ret_from_crit_except:
 239	ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH
 240	rfci
 241
 242ret_from_mc_except:
 243	ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH
 244	rfmci
 245
 246/* Exception prolog code for all exceptions */
 247#define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
 248	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
 249	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
 250	std	r10,PACA_EX##type+EX_R10(r13);				    \
 251	std	r11,PACA_EX##type+EX_R11(r13);				    \
 252	mfcr	r10;			/* save CR */			    \
 253	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
 254	DO_KVM	intnum,SPRN_##type##_SRR1;    /* KVM hook */		    \
 255	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
 256	addition;			/* additional code for that exc. */ \
 257	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
 
 
 258	type##_SET_KSTACK;		/* get special stack if necessary */\
 259	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
 260	beq	1f;			/* branch around if supervisor */   \
 261	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
 2621:	type##_BTB_FLUSH		\
 263	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
 264	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
 265	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
 266
 267/* Exception type-specific macros */
 268#define	GEN_SET_KSTACK							    \
 269	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
 270#define SPRN_GEN_SRR0	SPRN_SRR0
 271#define SPRN_GEN_SRR1	SPRN_SRR1
 272
 273#define	GDBELL_SET_KSTACK	GEN_SET_KSTACK
 274#define SPRN_GDBELL_SRR0	SPRN_GSRR0
 275#define SPRN_GDBELL_SRR1	SPRN_GSRR1
 276
 277#define CRIT_SET_KSTACK						            \
 278	ld	r1,PACA_CRIT_STACK(r13);				    \
 279	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
 280#define SPRN_CRIT_SRR0	SPRN_CSRR0
 281#define SPRN_CRIT_SRR1	SPRN_CSRR1
 282
 283#define DBG_SET_KSTACK						            \
 284	ld	r1,PACA_DBG_STACK(r13);					    \
 285	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
 286#define SPRN_DBG_SRR0	SPRN_DSRR0
 287#define SPRN_DBG_SRR1	SPRN_DSRR1
 288
 289#define MC_SET_KSTACK						            \
 290	ld	r1,PACA_MC_STACK(r13);					    \
 291	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
 292#define SPRN_MC_SRR0	SPRN_MCSRR0
 293#define SPRN_MC_SRR1	SPRN_MCSRR1
 294
 295#ifdef CONFIG_PPC_FSL_BOOK3E
 296#define GEN_BTB_FLUSH			\
 297	START_BTB_FLUSH_SECTION		\
 298		beq 1f;			\
 299		BTB_FLUSH(r10)			\
 300		1:		\
 301	END_BTB_FLUSH_SECTION
 302
 303#define CRIT_BTB_FLUSH			\
 304	START_BTB_FLUSH_SECTION		\
 305		BTB_FLUSH(r10)		\
 306	END_BTB_FLUSH_SECTION
 307
 308#define DBG_BTB_FLUSH CRIT_BTB_FLUSH
 309#define MC_BTB_FLUSH CRIT_BTB_FLUSH
 310#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH
 311#else
 312#define GEN_BTB_FLUSH
 313#define CRIT_BTB_FLUSH
 314#define DBG_BTB_FLUSH
 315#define MC_BTB_FLUSH
 316#define GDBELL_BTB_FLUSH
 317#endif
 318
 319#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition)			    \
 320	EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))
 321
 322#define CRIT_EXCEPTION_PROLOG(n, intnum, addition)			    \
 323	EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n))
 324
 325#define DBG_EXCEPTION_PROLOG(n, intnum, addition)			    \
 326	EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n))
 327
 328#define MC_EXCEPTION_PROLOG(n, intnum, addition)			    \
 329	EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n))
 330
 331#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition)			    \
 332	EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n))
 333
 334/* Variants of the "addition" argument for the prolog
 335 */
 336#define PROLOG_ADDITION_NONE_GEN(n)
 337#define PROLOG_ADDITION_NONE_GDBELL(n)
 338#define PROLOG_ADDITION_NONE_CRIT(n)
 339#define PROLOG_ADDITION_NONE_DBG(n)
 340#define PROLOG_ADDITION_NONE_MC(n)
 341
 342#define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
 343	lbz	r10,PACAIRQSOFTMASK(r13);	/* are irqs soft-masked? */ \
 344	andi.	r10,r10,IRQS_DISABLED;	/* yes -> go out of line */ \
 345	bne	masked_interrupt_book3e_##n
 346
 347/*
 348 * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is
 349 * called, because that does SAVE_NVGPRS which must see the original register
 350 * values, otherwise the scratch values might be restored when exiting the
 351 * interrupt.
 352 */
 353#define PROLOG_ADDITION_2REGS_GEN(n)					    \
 354	std	r14,PACA_EXGEN+EX_R14(r13);				    \
 355	std	r15,PACA_EXGEN+EX_R15(r13)
 356
 357#define PROLOG_ADDITION_1REG_GEN(n)					    \
 358	std	r14,PACA_EXGEN+EX_R14(r13);
 359
 360#define PROLOG_ADDITION_2REGS_CRIT(n)					    \
 361	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
 362	std	r15,PACA_EXCRIT+EX_R15(r13)
 363
 364#define PROLOG_ADDITION_2REGS_DBG(n)					    \
 365	std	r14,PACA_EXDBG+EX_R14(r13);				    \
 366	std	r15,PACA_EXDBG+EX_R15(r13)
 367
 368#define PROLOG_ADDITION_2REGS_MC(n)					    \
 369	std	r14,PACA_EXMC+EX_R14(r13);				    \
 370	std	r15,PACA_EXMC+EX_R15(r13)
 371
 372
 373/* Core exception code for all exceptions except TLB misses. */
 374#define EXCEPTION_COMMON_LVL(n, scratch, excf)				    \
 
 
 375exc_##n##_common:							    \
 376	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
 377	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
 378	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
 379	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
 380	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
 381	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
 382	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
 383	beq	2f;			/* if from kernel mode */	    \
 3842:	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
 385	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
 386	mfspr	r5,scratch;		/* get back r13 */		    \
 387	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
 388	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
 389	mflr	r6;			/* save LR in stackframe */	    \
 390	mfctr	r7;			/* save CTR in stackframe */	    \
 391	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
 392	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
 393	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
 394	lbz	r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */	    \
 395	ld	r12,exception_marker@toc(r2);				    \
 396	li	r0,0;							    \
 397	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
 398	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
 399	std	r5,GPR13(r1);		/* save it to stackframe */	    \
 400	std	r6,_LINK(r1);						    \
 401	std	r7,_CTR(r1);						    \
 402	std	r8,_XER(r1);						    \
 403	li	r3,(n);			/* regs.trap vector */		    \
 404	std	r9,0(r1);		/* store stack frame back link */   \
 405	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
 406	std	r9,GPR1(r1);		/* store stack frame back link */   \
 407	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
 408	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
 409	std	r3,_TRAP(r1);		/* set trap number		*/  \
 410	std	r0,RESULT(r1);		/* clear regs->result */	    \
 411	SAVE_NVGPRS(r1);
 412
 413#define EXCEPTION_COMMON(n) \
 414	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN)
 415#define EXCEPTION_COMMON_CRIT(n) \
 416	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT)
 417#define EXCEPTION_COMMON_MC(n) \
 418	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC)
 419#define EXCEPTION_COMMON_DBG(n) \
 420	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 421
 422/* XXX FIXME: Restore r14/r15 when necessary */
 423#define BAD_STACK_TRAMPOLINE(n)						    \
 424exc_##n##_bad_stack:							    \
 425	li	r1,(n);			/* get exception number */	    \
 426	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
 427	b	bad_stack_book3e;	/* bad stack error */
 428
 429/* WARNING: If you change the layout of this stub, make sure you check
 430	*   the debug exception handler which handles single stepping
 431	*   into exceptions from userspace, and the MM code in
 432	*   arch/powerpc/mm/tlb_nohash.c which patches the branch here
 433	*   and would need to be updated if that branch is moved
 434	*/
 435#define	EXCEPTION_STUB(loc, label)					\
 436	. = interrupt_base_book3e + loc;				\
 437	nop;	/* To make debug interrupts happy */			\
 438	b	exc_##label##_book3e;
 439
 440#define ACK_NONE(r)
 441#define ACK_DEC(r)							\
 442	lis	r,TSR_DIS@h;						\
 443	mtspr	SPRN_TSR,r
 444#define ACK_FIT(r)							\
 445	lis	r,TSR_FIS@h;						\
 446	mtspr	SPRN_TSR,r
 447
 448/* Used by asynchronous interrupt that may happen in the idle loop.
 449 *
 450 * This check if the thread was in the idle loop, and if yes, returns
 451 * to the caller rather than the PC. This is to avoid a race if
 452 * interrupts happen before the wait instruction.
 453 */
 454#define CHECK_NAPPING()							\
 455	ld	r11, PACA_THREAD_INFO(r13);				\
 456	ld	r10,TI_LOCAL_FLAGS(r11);				\
 457	andi.	r9,r10,_TLF_NAPPING;					\
 458	beq+	1f;							\
 459	ld	r8,_LINK(r1);						\
 460	rlwinm	r7,r10,0,~_TLF_NAPPING;					\
 461	std	r8,_NIP(r1);						\
 462	std	r7,TI_LOCAL_FLAGS(r11);					\
 4631:
 464
 465
 466#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack)		\
 467	START_EXCEPTION(label);						\
 468	NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\
 469	EXCEPTION_COMMON(trapnum)					\
 470	ack(r8);							\
 471	CHECK_NAPPING();						\
 472	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
 473	bl	hdlr;							\
 474	b	interrupt_return
 475
 476/* This value is used to mark exception frames on the stack. */
 477	.section	".toc","aw"
 478exception_marker:
 479	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
 480
 481
 482/*
 483 * And here we have the exception vectors !
 484 */
 485
 486	.text
 487	.balign	0x1000
 488	.globl interrupt_base_book3e
 489interrupt_base_book3e:					/* fake trap */
 490	EXCEPTION_STUB(0x000, machine_check)
 491	EXCEPTION_STUB(0x020, critical_input)		/* 0x0100 */
 492	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
 493	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
 494	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
 495	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
 496	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
 497	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
 498	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
 499	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
 500	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
 501	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
 502	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
 503	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 504	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 505	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
 506	EXCEPTION_STUB(0x200, altivec_unavailable)
 507	EXCEPTION_STUB(0x220, altivec_assist)
 508	EXCEPTION_STUB(0x260, perfmon)
 509	EXCEPTION_STUB(0x280, doorbell)
 510	EXCEPTION_STUB(0x2a0, doorbell_crit)
 511	EXCEPTION_STUB(0x2c0, guest_doorbell)
 512	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
 513	EXCEPTION_STUB(0x300, hypercall)
 514	EXCEPTION_STUB(0x320, ehpriv)
 515	EXCEPTION_STUB(0x340, lrat_error)
 516
 517	.globl __end_interrupts
 518__end_interrupts:
 519
 520/* Critical Input Interrupt */
 521	START_EXCEPTION(critical_input);
 522	CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
 523			      PROLOG_ADDITION_NONE)
 524	EXCEPTION_COMMON_CRIT(0x100)
 525	bl	special_reg_save
 526	CHECK_NAPPING();
 527	addi	r3,r1,STACK_FRAME_OVERHEAD
 528	bl	unknown_nmi_exception
 529	b	ret_from_crit_except
 530
 531/* Machine Check Interrupt */
 532	START_EXCEPTION(machine_check);
 533	MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
 534			    PROLOG_ADDITION_NONE)
 535	EXCEPTION_COMMON_MC(0x000)
 536	bl	special_reg_save
 537	CHECK_NAPPING();
 538	addi	r3,r1,STACK_FRAME_OVERHEAD
 539	bl	machine_check_exception
 540	b	ret_from_mc_except
 541
 542/* Data Storage Interrupt */
 543	START_EXCEPTION(data_storage)
 544	NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE,
 545				PROLOG_ADDITION_2REGS)
 546	mfspr	r14,SPRN_DEAR
 547	mfspr	r15,SPRN_ESR
 548	std	r14,_DAR(r1)
 549	std	r15,_DSISR(r1)
 550	ld	r14,PACA_EXGEN+EX_R14(r13)
 551	ld	r15,PACA_EXGEN+EX_R15(r13)
 552	EXCEPTION_COMMON(0x300)
 553	b	storage_fault_common
 554
 555/* Instruction Storage Interrupt */
 556	START_EXCEPTION(instruction_storage);
 557	NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE,
 558				PROLOG_ADDITION_2REGS)
 559	li	r15,0
 560	mr	r14,r10
 561	std	r14,_DAR(r1)
 562	std	r15,_DSISR(r1)
 563	ld	r14,PACA_EXGEN+EX_R14(r13)
 564	ld	r15,PACA_EXGEN+EX_R15(r13)
 565	EXCEPTION_COMMON(0x400)
 566	b	storage_fault_common
 567
 568/* External Input Interrupt */
 569	MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
 570			   external_input, do_IRQ, ACK_NONE)
 571
 572/* Alignment */
 573	START_EXCEPTION(alignment);
 574	NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT,
 575				PROLOG_ADDITION_2REGS)
 576	mfspr	r14,SPRN_DEAR
 577	mfspr	r15,SPRN_ESR
 578	std	r14,_DAR(r1)
 579	std	r15,_DSISR(r1)
 580	ld	r14,PACA_EXGEN+EX_R14(r13)
 581	ld	r15,PACA_EXGEN+EX_R15(r13)
 582	EXCEPTION_COMMON(0x600)
 583	b	alignment_more	/* no room, go out of line */
 584
 585/* Program Interrupt */
 586	START_EXCEPTION(program);
 587	NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM,
 588				PROLOG_ADDITION_1REG)
 589	mfspr	r14,SPRN_ESR
 
 590	std	r14,_DSISR(r1)
 591	ld	r14,PACA_EXGEN+EX_R14(r13)
 592	EXCEPTION_COMMON(0x700)
 593	addi	r3,r1,STACK_FRAME_OVERHEAD
 594	bl	program_check_exception
 595	REST_NVGPRS(r1)
 596	b	interrupt_return
 
 597
 598/* Floating Point Unavailable Interrupt */
 599	START_EXCEPTION(fp_unavailable);
 600	NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL,
 601				PROLOG_ADDITION_NONE)
 602	/* we can probably do a shorter exception entry for that one... */
 603	EXCEPTION_COMMON(0x800)
 604	ld	r12,_MSR(r1)
 605	andi.	r0,r12,MSR_PR;
 606	beq-	1f
 607	bl	load_up_fpu
 608	b	fast_interrupt_return
 6091:	addi	r3,r1,STACK_FRAME_OVERHEAD
 610	bl	kernel_fp_unavailable_exception
 611	b	interrupt_return
 612
 613/* Altivec Unavailable Interrupt */
 614	START_EXCEPTION(altivec_unavailable);
 615	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
 616				PROLOG_ADDITION_NONE)
 617	/* we can probably do a shorter exception entry for that one... */
 618	EXCEPTION_COMMON(0x200)
 619#ifdef CONFIG_ALTIVEC
 620BEGIN_FTR_SECTION
 621	ld	r12,_MSR(r1)
 622	andi.	r0,r12,MSR_PR;
 623	beq-	1f
 624	bl	load_up_altivec
 625	b	fast_interrupt_return
 6261:
 627END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 628#endif
 629	addi	r3,r1,STACK_FRAME_OVERHEAD
 630	bl	altivec_unavailable_exception
 631	b	interrupt_return
 632
 633/* AltiVec Assist */
 634	START_EXCEPTION(altivec_assist);
 635	NORMAL_EXCEPTION_PROLOG(0x220,
 636				BOOKE_INTERRUPT_ALTIVEC_ASSIST,
 637				PROLOG_ADDITION_NONE)
 638	EXCEPTION_COMMON(0x220)
 639	addi	r3,r1,STACK_FRAME_OVERHEAD
 640#ifdef CONFIG_ALTIVEC
 641BEGIN_FTR_SECTION
 642	bl	altivec_assist_exception
 643END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 644	REST_NVGPRS(r1)
 645#else
 646	bl	unknown_exception
 647#endif
 648	b	interrupt_return
 649
 650
 651/* Decrementer Interrupt */
 652	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
 653			   decrementer, timer_interrupt, ACK_DEC)
 654
 655/* Fixed Interval Timer Interrupt */
 656	MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
 657			   fixed_interval, unknown_exception, ACK_FIT)
 658
 659/* Watchdog Timer Interrupt */
 660	START_EXCEPTION(watchdog);
 661	CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
 662			      PROLOG_ADDITION_NONE)
 663	EXCEPTION_COMMON_CRIT(0x9f0)
 664	bl	special_reg_save
 665	CHECK_NAPPING();
 666	addi	r3,r1,STACK_FRAME_OVERHEAD
 667#ifdef CONFIG_BOOKE_WDT
 668	bl	WatchdogException
 669#else
 670	bl	unknown_nmi_exception
 671#endif
 672	b	ret_from_crit_except
 673
 674/* System Call Interrupt */
 675	START_EXCEPTION(system_call)
 676	mr	r9,r13			/* keep a copy of userland r13 */
 677	mfspr	r11,SPRN_SRR0		/* get return address */
 678	mfspr	r12,SPRN_SRR1		/* get previous MSR */
 679	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
 680	b	system_call_common
 681
 682/* Auxiliary Processor Unavailable Interrupt */
 683	START_EXCEPTION(ap_unavailable);
 684	NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL,
 685				PROLOG_ADDITION_NONE)
 686	EXCEPTION_COMMON(0xf20)
 687	addi	r3,r1,STACK_FRAME_OVERHEAD
 688	bl	unknown_exception
 689	b	interrupt_return
 690
 691/* Debug exception as a critical interrupt*/
 692	START_EXCEPTION(debug_crit);
 693	CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
 694			      PROLOG_ADDITION_2REGS)
 695
 696	/*
 697	 * If there is a single step or branch-taken exception in an
 698	 * exception entry sequence, it was probably meant to apply to
 699	 * the code where the exception occurred (since exception entry
 700	 * doesn't turn off DE automatically).  We simulate the effect
 701	 * of turning off DE on entry to an exception handler by turning
 702	 * off DE in the CSRR1 value and clearing the debug status.
 703	 */
 704
 705	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
 706	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
 707	beq+	1f
 708
 709#ifdef CONFIG_RELOCATABLE
 710	ld	r15,PACATOC(r13)
 711	ld	r14,interrupt_base_book3e@got(r15)
 712	ld	r15,__end_interrupts@got(r15)
 713	cmpld	cr0,r10,r14
 714	cmpld	cr1,r10,r15
 715#else
 716	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
 717	cmpld	cr0, r10, r14
 718	LOAD_REG_IMMEDIATE_SYM(r14, r15, __end_interrupts)
 719	cmpld	cr1, r10, r14
 720#endif
 721	blt+	cr0,1f
 722	bge+	cr1,1f
 723
 724	/* here it looks like we got an inappropriate debug exception. */
 725	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
 726	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
 727	mtspr	SPRN_DBSR,r14
 728	mtspr	SPRN_CSRR1,r11
 729	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
 730	ld	r1,PACA_EXCRIT+EX_R1(r13)
 731	ld	r14,PACA_EXCRIT+EX_R14(r13)
 732	ld	r15,PACA_EXCRIT+EX_R15(r13)
 733	mtcr	r10
 734	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
 735	ld	r11,PACA_EXCRIT+EX_R11(r13)
 736	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
 737	rfci
 738
 739	/* Normal debug exception */
 740	/* XXX We only handle coming from userspace for now since we can't
 741	 *     quite save properly an interrupted kernel state yet
 742	 */
 7431:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
 744	beq	kernel_dbg_exc;		/* if from kernel mode */
 745
 746	/* Now we mash up things to make it look like we are coming on a
 747	 * normal exception
 748	 */
 
 
 749	mfspr	r14,SPRN_DBSR
 
 750	std	r14,_DSISR(r1)
 
 
 751	ld	r14,PACA_EXCRIT+EX_R14(r13)
 752	ld	r15,PACA_EXCRIT+EX_R15(r13)
 753	EXCEPTION_COMMON_CRIT(0xd00)
 754	addi	r3,r1,STACK_FRAME_OVERHEAD
 755	bl	DebugException
 756	REST_NVGPRS(r1)
 757	b	interrupt_return
 758
 759kernel_dbg_exc:
 760	b	.	/* NYI */
 761
 762/* Debug exception as a debug interrupt*/
 763	START_EXCEPTION(debug_debug);
 764	DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
 765						 PROLOG_ADDITION_2REGS)
 766
 767	/*
 768	 * If there is a single step or branch-taken exception in an
 769	 * exception entry sequence, it was probably meant to apply to
 770	 * the code where the exception occurred (since exception entry
 771	 * doesn't turn off DE automatically).  We simulate the effect
 772	 * of turning off DE on entry to an exception handler by turning
 773	 * off DE in the DSRR1 value and clearing the debug status.
 774	 */
 775
 776	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
 777	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
 778	beq+	1f
 779
 780#ifdef CONFIG_RELOCATABLE
 781	ld	r15,PACATOC(r13)
 782	ld	r14,interrupt_base_book3e@got(r15)
 783	ld	r15,__end_interrupts@got(r15)
 784	cmpld	cr0,r10,r14
 785	cmpld	cr1,r10,r15
 786#else
 787	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
 788	cmpld	cr0, r10, r14
 789	LOAD_REG_IMMEDIATE_SYM(r14, r15,__end_interrupts)
 790	cmpld	cr1, r10, r14
 791#endif
 792	blt+	cr0,1f
 793	bge+	cr1,1f
 794
 795	/* here it looks like we got an inappropriate debug exception. */
 796	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
 797	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
 798	mtspr	SPRN_DBSR,r14
 799	mtspr	SPRN_DSRR1,r11
 800	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
 801	ld	r1,PACA_EXDBG+EX_R1(r13)
 802	ld	r14,PACA_EXDBG+EX_R14(r13)
 803	ld	r15,PACA_EXDBG+EX_R15(r13)
 804	mtcr	r10
 805	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
 806	ld	r11,PACA_EXDBG+EX_R11(r13)
 807	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
 808	rfdi
 809
 810	/* Normal debug exception */
 811	/* XXX We only handle coming from userspace for now since we can't
 812	 *     quite save properly an interrupted kernel state yet
 813	 */
 8141:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
 815	beq	kernel_dbg_exc;		/* if from kernel mode */
 816
 817	/* Now we mash up things to make it look like we are coming on a
 818	 * normal exception
 819	 */
 
 
 820	mfspr	r14,SPRN_DBSR
 
 821	std	r14,_DSISR(r1)
 
 
 822	ld	r14,PACA_EXDBG+EX_R14(r13)
 823	ld	r15,PACA_EXDBG+EX_R15(r13)
 824	EXCEPTION_COMMON_DBG(0xd08)
 825	addi	r3,r1,STACK_FRAME_OVERHEAD
 826	bl	DebugException
 827	REST_NVGPRS(r1)
 828	b	interrupt_return
 829
 830	START_EXCEPTION(perfmon);
 831	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
 832				PROLOG_ADDITION_NONE)
 833	EXCEPTION_COMMON(0x260)
 834	CHECK_NAPPING()
 835	addi	r3,r1,STACK_FRAME_OVERHEAD
 836	bl	performance_monitor_exception
 837	b	interrupt_return
 838
 839/* Doorbell interrupt */
 840	MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
 841			   doorbell, doorbell_exception, ACK_NONE)
 842
 843/* Doorbell critical Interrupt */
 844	START_EXCEPTION(doorbell_crit);
 845	CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
 846			      PROLOG_ADDITION_NONE)
 847	EXCEPTION_COMMON_CRIT(0x2a0)
 848	bl	special_reg_save
 849	CHECK_NAPPING();
 850	addi	r3,r1,STACK_FRAME_OVERHEAD
 851	bl	unknown_nmi_exception
 852	b	ret_from_crit_except
 853
 854/*
 855 *	Guest doorbell interrupt
 856 *	This general exception use GSRRx save/restore registers
 857 */
 858	START_EXCEPTION(guest_doorbell);
 859	GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL,
 860			        PROLOG_ADDITION_NONE)
 861	EXCEPTION_COMMON(0x2c0)
 862	addi	r3,r1,STACK_FRAME_OVERHEAD
 863	bl	unknown_exception
 864	b	interrupt_return
 865
 866/* Guest Doorbell critical Interrupt */
 867	START_EXCEPTION(guest_doorbell_crit);
 868	CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
 869			      PROLOG_ADDITION_NONE)
 870	EXCEPTION_COMMON_CRIT(0x2e0)
 871	bl	special_reg_save
 872	CHECK_NAPPING();
 873	addi	r3,r1,STACK_FRAME_OVERHEAD
 874	bl	unknown_nmi_exception
 875	b	ret_from_crit_except
 876
 877/* Hypervisor call */
 878	START_EXCEPTION(hypercall);
 879	NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL,
 880			        PROLOG_ADDITION_NONE)
 881	EXCEPTION_COMMON(0x310)
 882	addi	r3,r1,STACK_FRAME_OVERHEAD
 883	bl	unknown_exception
 884	b	interrupt_return
 
 
 885
 886/* Embedded Hypervisor priviledged  */
 887	START_EXCEPTION(ehpriv);
 888	NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV,
 889			        PROLOG_ADDITION_NONE)
 890	EXCEPTION_COMMON(0x320)
 891	addi	r3,r1,STACK_FRAME_OVERHEAD
 892	bl	unknown_exception
 893	b	interrupt_return
 894
 895/* LRAT Error interrupt */
 896	START_EXCEPTION(lrat_error);
 897	NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
 898			        PROLOG_ADDITION_NONE)
 899	EXCEPTION_COMMON(0x340)
 900	addi	r3,r1,STACK_FRAME_OVERHEAD
 901	bl	unknown_exception
 902	b	interrupt_return
 903
 904.macro SEARCH_RESTART_TABLE
 905#ifdef CONFIG_RELOCATABLE
 906	ld	r11,PACATOC(r13)
 907	ld	r14,__start___restart_table@got(r11)
 908	ld	r15,__stop___restart_table@got(r11)
 909#else
 910	LOAD_REG_IMMEDIATE_SYM(r14, r11, __start___restart_table)
 911	LOAD_REG_IMMEDIATE_SYM(r15, r11, __stop___restart_table)
 912#endif
 913300:
 914	cmpd	r14,r15
 915	beq	302f
 916	ld	r11,0(r14)
 917	cmpld	r10,r11
 918	blt	301f
 919	ld	r11,8(r14)
 920	cmpld	r10,r11
 921	bge	301f
 922	ld	r11,16(r14)
 923	b	303f
 924301:
 925	addi	r14,r14,24
 926	b	300b
 927302:
 928	li	r11,0
 929303:
 930.endm
 931
 932/*
 933 * An interrupt came in while soft-disabled; We mark paca->irq_happened
 934 * accordingly and if the interrupt is level sensitive, we hard disable
 935 * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so
 936 * keep these in synch.
 937 */
 938
 939.macro masked_interrupt_book3e paca_irq full_mask
 940	std	r14,PACA_EXGEN+EX_R14(r13)
 941	std	r15,PACA_EXGEN+EX_R15(r13)
 942
 943	lbz	r10,PACAIRQHAPPENED(r13)
 944	.if \full_mask == 1
 945	ori	r10,r10,\paca_irq | PACA_IRQ_HARD_DIS
 946	.else
 947	ori	r10,r10,\paca_irq
 948	.endif
 949	stb	r10,PACAIRQHAPPENED(r13)
 950
 951	.if \full_mask == 1
 952	xori	r11,r11,MSR_EE		/* clear MSR_EE */
 953	mtspr	SPRN_SRR1,r11
 954	.endif
 955
 956	mfspr	r10,SPRN_SRR0
 957	SEARCH_RESTART_TABLE
 958	cmpdi	r11,0
 959	beq	1f
 960	mtspr	SPRN_SRR0,r11		/* return to restart address */
 9611:
 962
 963	lwz	r11,PACA_EXGEN+EX_CR(r13)
 964	mtcr	r11
 965	ld	r10,PACA_EXGEN+EX_R10(r13)
 966	ld	r11,PACA_EXGEN+EX_R11(r13)
 967	ld	r14,PACA_EXGEN+EX_R14(r13)
 968	ld	r15,PACA_EXGEN+EX_R15(r13)
 969	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
 970	rfi
 971	b	.
 972.endm
 973
 974masked_interrupt_book3e_0x500:
 975	masked_interrupt_book3e PACA_IRQ_EE 1
 
 
 976
 977masked_interrupt_book3e_0x900:
 978	ACK_DEC(r10);
 979	masked_interrupt_book3e PACA_IRQ_DEC 0
 980
 981masked_interrupt_book3e_0x980:
 982	ACK_FIT(r10);
 983	masked_interrupt_book3e PACA_IRQ_DEC 0
 984
 985masked_interrupt_book3e_0x280:
 986masked_interrupt_book3e_0x2c0:
 987	masked_interrupt_book3e PACA_IRQ_DBELL 0
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 988
 989/*
 990 * This is called from 0x300 and 0x400 handlers after the prologs with
 991 * r14 and r15 containing the fault address and error code, with the
 992 * original values stashed away in the PACA
 993 */
 994storage_fault_common:
 
 
 
 
 
 
 
 
 
 
 
 
 
 995	addi	r3,r1,STACK_FRAME_OVERHEAD
 996	bl	do_page_fault
 997	b	interrupt_return
 
 998
 999/*
1000 * Alignment exception doesn't fit entirely in the 0x100 bytes so it
1001 * continues here.
1002 */
1003alignment_more:
 
 
1004	addi	r3,r1,STACK_FRAME_OVERHEAD
1005	bl	alignment_exception
1006	REST_NVGPRS(r1)
1007	b	interrupt_return
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1008
1009/*
1010 * Trampolines used when spotting a bad kernel stack pointer in
1011 * the exception entry code.
1012 *
1013 * TODO: move some bits like SRR0 read to trampoline, pass PACA
1014 * index around, etc... to handle crit & mcheck
1015 */
1016BAD_STACK_TRAMPOLINE(0x000)
1017BAD_STACK_TRAMPOLINE(0x100)
1018BAD_STACK_TRAMPOLINE(0x200)
1019BAD_STACK_TRAMPOLINE(0x220)
1020BAD_STACK_TRAMPOLINE(0x260)
1021BAD_STACK_TRAMPOLINE(0x280)
1022BAD_STACK_TRAMPOLINE(0x2a0)
1023BAD_STACK_TRAMPOLINE(0x2c0)
1024BAD_STACK_TRAMPOLINE(0x2e0)
1025BAD_STACK_TRAMPOLINE(0x300)
1026BAD_STACK_TRAMPOLINE(0x310)
1027BAD_STACK_TRAMPOLINE(0x320)
1028BAD_STACK_TRAMPOLINE(0x340)
1029BAD_STACK_TRAMPOLINE(0x400)
1030BAD_STACK_TRAMPOLINE(0x500)
1031BAD_STACK_TRAMPOLINE(0x600)
1032BAD_STACK_TRAMPOLINE(0x700)
1033BAD_STACK_TRAMPOLINE(0x800)
1034BAD_STACK_TRAMPOLINE(0x900)
1035BAD_STACK_TRAMPOLINE(0x980)
1036BAD_STACK_TRAMPOLINE(0x9f0)
1037BAD_STACK_TRAMPOLINE(0xa00)
1038BAD_STACK_TRAMPOLINE(0xb00)
1039BAD_STACK_TRAMPOLINE(0xc00)
1040BAD_STACK_TRAMPOLINE(0xd00)
1041BAD_STACK_TRAMPOLINE(0xd08)
1042BAD_STACK_TRAMPOLINE(0xe00)
1043BAD_STACK_TRAMPOLINE(0xf00)
1044BAD_STACK_TRAMPOLINE(0xf20)
1045
1046	.globl	bad_stack_book3e
1047bad_stack_book3e:
1048	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
1049	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
1050	ld	r1,PACAEMERGSP(r13)
1051	subi	r1,r1,64+INT_FRAME_SIZE
1052	std	r10,_NIP(r1)
1053	std	r11,_MSR(r1)
1054	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
1055	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
1056	std	r10,GPR1(r1)
1057	std	r11,_CCR(r1)
1058	mfspr	r10,SPRN_DEAR
1059	mfspr	r11,SPRN_ESR
1060	std	r10,_DAR(r1)
1061	std	r11,_DSISR(r1)
1062	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
1063	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
1064	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
1065	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
1066	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
1067	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
1068	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
1069	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
1070	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
1071	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
1072	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
1073	std	r5,GPR13(r1);		/* save it to stackframe */	    \
1074	mflr	r10
1075	mfctr	r11
1076	mfxer	r12
1077	std	r10,_LINK(r1)
1078	std	r11,_CTR(r1)
1079	std	r12,_XER(r1)
1080	SAVE_10GPRS(14,r1)
1081	SAVE_8GPRS(24,r1)
1082	lhz	r12,PACA_TRAP_SAVE(r13)
1083	std	r12,_TRAP(r1)
1084	addi	r11,r1,INT_FRAME_SIZE
1085	std	r11,0(r1)
1086	li	r12,0
1087	std	r12,0(r11)
1088	ld	r2,PACATOC(r13)
10891:	addi	r3,r1,STACK_FRAME_OVERHEAD
1090	bl	kernel_bad_stack
1091	b	1b
1092
1093/*
1094 * Setup the initial TLB for a core. This current implementation
1095 * assume that whatever we are running off will not conflict with
1096 * the new mapping at PAGE_OFFSET.
1097 */
1098_GLOBAL(initial_tlb_book3e)
1099
1100	/* Look for the first TLB with IPROT set */
1101	mfspr	r4,SPRN_TLB0CFG
1102	andi.	r3,r4,TLBnCFG_IPROT
1103	lis	r3,MAS0_TLBSEL(0)@h
1104	bne	found_iprot
1105
1106	mfspr	r4,SPRN_TLB1CFG
1107	andi.	r3,r4,TLBnCFG_IPROT
1108	lis	r3,MAS0_TLBSEL(1)@h
1109	bne	found_iprot
1110
1111	mfspr	r4,SPRN_TLB2CFG
1112	andi.	r3,r4,TLBnCFG_IPROT
1113	lis	r3,MAS0_TLBSEL(2)@h
1114	bne	found_iprot
1115
1116	lis	r3,MAS0_TLBSEL(3)@h
1117	mfspr	r4,SPRN_TLB3CFG
1118	/* fall through */
1119
1120found_iprot:
1121	andi.	r5,r4,TLBnCFG_HES
1122	bne	have_hes
1123
1124	mflr	r8				/* save LR */
1125/* 1. Find the index of the entry we're executing in
1126 *
1127 * r3 = MAS0_TLBSEL (for the iprot array)
1128 * r4 = SPRN_TLBnCFG
1129 */
1130	bl	invstr				/* Find our address */
1131invstr:	mflr	r6				/* Make it accessible */
1132	mfmsr	r7
1133	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
1134	mfspr	r7,SPRN_PID
1135	slwi	r7,r7,16
1136	or	r7,r7,r5
1137	mtspr	SPRN_MAS6,r7
1138	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
1139
1140	mfspr	r3,SPRN_MAS0
1141	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
1142
1143	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
1144	oris	r7,r7,MAS1_IPROT@h
1145	mtspr	SPRN_MAS1,r7
1146	tlbwe
1147
1148/* 2. Invalidate all entries except the entry we're executing in
1149 *
1150 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1151 * r4 = SPRN_TLBnCFG
1152 * r5 = ESEL of entry we are running in
1153 */
1154	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
1155	li	r6,0				/* Set Entry counter to 0 */
11561:	mr	r7,r3				/* Set MAS0(TLBSEL) */
1157	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
1158	mtspr	SPRN_MAS0,r7
1159	tlbre
1160	mfspr	r7,SPRN_MAS1
1161	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
1162	cmpw	r5,r6
1163	beq	skpinv				/* Dont update the current execution TLB */
1164	mtspr	SPRN_MAS1,r7
1165	tlbwe
1166	isync
1167skpinv:	addi	r6,r6,1				/* Increment */
1168	cmpw	r6,r4				/* Are we done? */
1169	bne	1b				/* If not, repeat */
1170
1171	/* Invalidate all TLBs */
1172	PPC_TLBILX_ALL(0,R0)
1173	sync
1174	isync
1175
1176/* 3. Setup a temp mapping and jump to it
1177 *
1178 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1179 * r5 = ESEL of entry we are running in
1180 */
1181	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
1182	addi	r7,r7,0x1
1183	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
1184	mtspr	SPRN_MAS0,r4
1185	tlbre
1186
1187	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
1188	mtspr	SPRN_MAS0,r4
1189
1190	mfspr	r7,SPRN_MAS1
1191	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
1192	mtspr	SPRN_MAS1,r6
1193
1194	tlbwe
1195
1196	mfmsr	r6
1197	xori	r6,r6,MSR_IS
1198	mtspr	SPRN_SRR1,r6
1199	bl	1f		/* Find our address */
12001:	mflr	r6
1201	addi	r6,r6,(2f - 1b)
1202	mtspr	SPRN_SRR0,r6
1203	rfi
12042:
1205
1206/* 4. Clear out PIDs & Search info
1207 *
1208 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1209 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1210 * r5 = MAS3
1211 */
1212	li	r6,0
1213	mtspr   SPRN_MAS6,r6
1214	mtspr	SPRN_PID,r6
1215
1216/* 5. Invalidate mapping we started in
1217 *
1218 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1219 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1220 * r5 = MAS3
1221 */
1222	mtspr	SPRN_MAS0,r3
1223	tlbre
1224	mfspr	r6,SPRN_MAS1
1225	rlwinm	r6,r6,0,2,31	/* clear IPROT and VALID */
1226	mtspr	SPRN_MAS1,r6
1227	tlbwe
 
 
 
1228	sync
1229	isync
1230
 
 
 
 
 
 
 
1231/* 6. Setup KERNELBASE mapping in TLB[0]
1232 *
1233 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1234 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1235 * r5 = MAS3
1236 */
1237	rlwinm	r3,r3,0,16,3	/* clear ESEL */
1238	mtspr	SPRN_MAS0,r3
1239	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
1240	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
1241	mtspr	SPRN_MAS1,r6
1242
1243	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED)
1244	mtspr	SPRN_MAS2,r6
1245
1246	rlwinm	r5,r5,0,0,25
1247	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
1248	mtspr	SPRN_MAS3,r5
1249	li	r5,-1
1250	rlwinm	r5,r5,0,0,25
1251
1252	tlbwe
1253
1254/* 7. Jump to KERNELBASE mapping
1255 *
1256 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1257 */
1258	/* Now we branch the new virtual address mapped by this entry */
1259	bl	1f		/* Find our address */
12601:	mflr	r6
1261	addi	r6,r6,(2f - 1b)
1262	tovirt(r6,r6)
1263	lis	r7,MSR_KERNEL@h
1264	ori	r7,r7,MSR_KERNEL@l
1265	mtspr	SPRN_SRR0,r6
1266	mtspr	SPRN_SRR1,r7
1267	rfi				/* start execution out of TLB1[0] entry */
12682:
1269
1270/* 8. Clear out the temp mapping
1271 *
1272 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1273 */
1274	mtspr	SPRN_MAS0,r4
1275	tlbre
1276	mfspr	r5,SPRN_MAS1
1277	rlwinm	r5,r5,0,2,31	/* clear IPROT and VALID */
1278	mtspr	SPRN_MAS1,r5
1279	tlbwe
 
 
 
1280	sync
1281	isync
1282
1283	/* We translate LR and return */
1284	tovirt(r8,r8)
1285	mtlr	r8
1286	blr
1287
1288have_hes:
1289	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
1290	 * kernel linear mapping. We also set MAS8 once for all here though
1291	 * that will have to be made dependent on whether we are running under
1292	 * a hypervisor I suppose.
1293	 */
1294
1295	/* BEWARE, MAGIC
1296	 * This code is called as an ordinary function on the boot CPU. But to
1297	 * avoid duplication, this code is also used in SCOM bringup of
1298	 * secondary CPUs. We read the code between the initial_tlb_code_start
1299	 * and initial_tlb_code_end labels one instruction at a time and RAM it
1300	 * into the new core via SCOM. That doesn't process branches, so there
1301	 * must be none between those two labels. It also means if this code
1302	 * ever takes any parameters, the SCOM code must also be updated to
1303	 * provide them.
1304	 */
1305	.globl a2_tlbinit_code_start
1306a2_tlbinit_code_start:
1307
1308	ori	r11,r3,MAS0_WQ_ALLWAYS
1309	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
1310	mtspr	SPRN_MAS0,r11
1311	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
1312	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
1313	mtspr	SPRN_MAS1,r3
1314	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
1315	mtspr	SPRN_MAS2,r3
1316	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
1317	mtspr	SPRN_MAS7_MAS3,r3
1318	li	r3,0
1319	mtspr	SPRN_MAS8,r3
1320
1321	/* Write the TLB entry */
1322	tlbwe
1323
1324	.globl a2_tlbinit_after_linear_map
1325a2_tlbinit_after_linear_map:
1326
1327	/* Now we branch the new virtual address mapped by this entry */
1328#ifdef CONFIG_RELOCATABLE
1329	ld	r5,PACATOC(r13)
1330	ld	r3,1f@got(r5)
1331#else
1332	LOAD_REG_IMMEDIATE_SYM(r3, r5, 1f)
1333#endif
1334	mtctr	r3
1335	bctr
1336
13371:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
1338	 * else (including IPROTed things left by firmware)
1339	 * r4 = TLBnCFG
1340	 * r3 = current address (more or less)
1341	 */
1342
1343	li	r5,0
1344	mtspr	SPRN_MAS6,r5
1345	tlbsx	0,r3
1346
1347	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
1348	rlwinm	r10,r4,8,0xff
1349	addi	r10,r10,-1	/* Get inner loop mask */
1350
1351	li	r3,1
1352
1353	mfspr	r5,SPRN_MAS1
1354	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
1355
1356	mfspr	r6,SPRN_MAS2
1357	rldicr	r6,r6,0,51		/* Extract EPN */
1358
1359	mfspr	r7,SPRN_MAS0
1360	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
1361
1362	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
1363
13642:	add	r4,r3,r8
1365	and	r4,r4,r10
1366
1367	rlwimi	r7,r4,16,MAS0_ESEL_MASK
1368
1369	mtspr	SPRN_MAS0,r7
1370	mtspr	SPRN_MAS1,r5
1371	mtspr	SPRN_MAS2,r6
1372	tlbwe
1373
1374	addi	r3,r3,1
1375	and.	r4,r3,r10
1376
1377	bne	3f
1378	addis	r6,r6,(1<<30)@h
13793:
1380	cmpw	r3,r9
1381	blt	2b
1382
1383	.globl  a2_tlbinit_after_iprot_flush
1384a2_tlbinit_after_iprot_flush:
1385
1386	PPC_TLBILX(0,0,R0)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1387	sync
1388	isync
1389
1390	.globl a2_tlbinit_code_end
1391a2_tlbinit_code_end:
1392
1393	/* We translate LR and return */
1394	mflr	r3
1395	tovirt(r3,r3)
1396	mtlr	r3
1397	blr
1398
1399/*
1400 * Main entry (boot CPU, thread 0)
1401 *
1402 * We enter here from head_64.S, possibly after the prom_init trampoline
1403 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
1404 * mode. Anything else is as it was left by the bootloader
1405 *
1406 * Initial requirements of this port:
1407 *
1408 * - Kernel loaded at 0 physical
1409 * - A good lump of memory mapped 0:0 by UTLB entry 0
1410 * - MSR:IS & MSR:DS set to 0
1411 *
1412 * Note that some of the above requirements will be relaxed in the future
1413 * as the kernel becomes smarter at dealing with different initial conditions
1414 * but for now you have to be careful
1415 */
1416_GLOBAL(start_initialization_book3e)
1417	mflr	r28
1418
1419	/* First, we need to setup some initial TLBs to map the kernel
1420	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
1421	 * and always use AS 0, so we just set it up to match our link
1422	 * address and never use 0 based addresses.
1423	 */
1424	bl	initial_tlb_book3e
1425
1426	/* Init global core bits */
1427	bl	init_core_book3e
1428
1429	/* Init per-thread bits */
1430	bl	init_thread_book3e
1431
1432	/* Return to common init code */
1433	tovirt(r28,r28)
1434	mtlr	r28
1435	blr
1436
1437
1438/*
1439 * Secondary core/processor entry
1440 *
1441 * This is entered for thread 0 of a secondary core, all other threads
1442 * are expected to be stopped. It's similar to start_initialization_book3e
1443 * except that it's generally entered from the holding loop in head_64.S
1444 * after CPUs have been gathered by Open Firmware.
1445 *
1446 * We assume we are in 32 bits mode running with whatever TLB entry was
1447 * set for us by the firmware or POR engine.
1448 */
1449_GLOBAL(book3e_secondary_core_init_tlb_set)
1450	li	r4,1
1451	b	generic_secondary_smp_init
1452
1453_GLOBAL(book3e_secondary_core_init)
1454	mflr	r28
1455
1456	/* Do we need to setup initial TLB entry ? */
1457	cmplwi	r4,0
1458	bne	2f
1459
1460	/* Setup TLB for this core */
1461	bl	initial_tlb_book3e
1462
1463	/* We can return from the above running at a different
1464	 * address, so recalculate r2 (TOC)
1465	 */
1466	bl	relative_toc
1467
1468	/* Init global core bits */
14692:	bl	init_core_book3e
1470
1471	/* Init per-thread bits */
14723:	bl	init_thread_book3e
1473
1474	/* Return to common init code at proper virtual address.
1475	 *
1476	 * Due to various previous assumptions, we know we entered this
1477	 * function at either the final PAGE_OFFSET mapping or using a
1478	 * 1:1 mapping at 0, so we don't bother doing a complicated check
1479	 * here, we just ensure the return address has the right top bits.
1480	 *
1481	 * Note that if we ever want to be smarter about where we can be
1482	 * started from, we have to be careful that by the time we reach
1483	 * the code below we may already be running at a different location
1484	 * than the one we were called from since initial_tlb_book3e can
1485	 * have moved us already.
1486	 */
1487	cmpdi	cr0,r28,0
1488	blt	1f
1489	lis	r3,PAGE_OFFSET@highest
1490	sldi	r3,r3,32
1491	or	r28,r28,r3
14921:	mtlr	r28
1493	blr
1494
1495_GLOBAL(book3e_secondary_thread_init)
1496	mflr	r28
1497	b	3b
1498
1499	.globl init_core_book3e
1500init_core_book3e:
1501	/* Establish the interrupt vector base */
1502	tovirt(r2,r2)
1503	LOAD_REG_ADDR(r3, interrupt_base_book3e)
1504	mtspr	SPRN_IVPR,r3
1505	sync
1506	blr
1507
1508init_thread_book3e:
1509	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
1510	mtspr	SPRN_EPCR,r3
1511
1512	/* Make sure interrupts are off */
1513	wrteei	0
1514
1515	/* disable all timers and clear out status */
1516	li	r3,0
1517	mtspr	SPRN_TCR,r3
1518	mfspr	r3,SPRN_TSR
1519	mtspr	SPRN_TSR,r3
1520
1521	blr
1522
1523_GLOBAL(__setup_base_ivors)
1524	SET_IVOR(0, 0x020) /* Critical Input */
1525	SET_IVOR(1, 0x000) /* Machine Check */
1526	SET_IVOR(2, 0x060) /* Data Storage */ 
1527	SET_IVOR(3, 0x080) /* Instruction Storage */
1528	SET_IVOR(4, 0x0a0) /* External Input */ 
1529	SET_IVOR(5, 0x0c0) /* Alignment */ 
1530	SET_IVOR(6, 0x0e0) /* Program */ 
1531	SET_IVOR(7, 0x100) /* FP Unavailable */ 
1532	SET_IVOR(8, 0x120) /* System Call */ 
1533	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ 
1534	SET_IVOR(10, 0x160) /* Decrementer */ 
1535	SET_IVOR(11, 0x180) /* Fixed Interval Timer */ 
1536	SET_IVOR(12, 0x1a0) /* Watchdog Timer */ 
1537	SET_IVOR(13, 0x1c0) /* Data TLB Error */ 
1538	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
1539	SET_IVOR(15, 0x040) /* Debug */
1540
1541	sync
1542
1543	blr
1544
1545_GLOBAL(setup_altivec_ivors)
1546	SET_IVOR(32, 0x200) /* AltiVec Unavailable */
1547	SET_IVOR(33, 0x220) /* AltiVec Assist */
1548	blr
1549
1550_GLOBAL(setup_perfmon_ivor)
1551	SET_IVOR(35, 0x260) /* Performance Monitor */
1552	blr
1553
1554_GLOBAL(setup_doorbell_ivors)
1555	SET_IVOR(36, 0x280) /* Processor Doorbell */
1556	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
1557	blr
1558
1559_GLOBAL(setup_ehv_ivors)
1560	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
1561	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
 
 
1562	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
1563	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
1564	blr
1565
1566_GLOBAL(setup_lrat_ivor)
1567	SET_IVOR(42, 0x340) /* LRAT Error */
 
 
 
 
 
 
 
 
 
1568	blr
v3.5.6
 
   1/*
   2 *  Boot code and exception vectors for Book3E processors
   3 *
   4 *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
   5 *
   6 *  This program is free software; you can redistribute it and/or
   7 *  modify it under the terms of the GNU General Public License
   8 *  as published by the Free Software Foundation; either version
   9 *  2 of the License, or (at your option) any later version.
  10 */
  11
  12#include <linux/threads.h>
  13#include <asm/reg.h>
  14#include <asm/page.h>
  15#include <asm/ppc_asm.h>
  16#include <asm/asm-offsets.h>
  17#include <asm/cputable.h>
  18#include <asm/setup.h>
  19#include <asm/thread_info.h>
  20#include <asm/reg_a2.h>
  21#include <asm/exception-64e.h>
  22#include <asm/bug.h>
  23#include <asm/irqflags.h>
  24#include <asm/ptrace.h>
  25#include <asm/ppc-opcode.h>
  26#include <asm/mmu.h>
  27#include <asm/hw_irq.h>
 
 
 
 
 
 
 
 
  28
  29/* XXX This will ultimately add space for a special exception save
  30 *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
  31 *     when taking special interrupts. For now we don't support that,
  32 *     special interrupts from within a non-standard level will probably
  33 *     blow you up
  34 */
  35#define	SPECIAL_EXC_FRAME_SIZE	INT_FRAME_SIZE
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  36
  37/* Exception prolog code for all exceptions */
  38#define EXCEPTION_PROLOG(n, type, addition)				    \
  39	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
  40	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
  41	std	r10,PACA_EX##type+EX_R10(r13);				    \
  42	std	r11,PACA_EX##type+EX_R11(r13);				    \
  43	mfcr	r10;			/* save CR */			    \
 
 
 
  44	addition;			/* additional code for that exc. */ \
  45	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
  46	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
  47	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
  48	type##_SET_KSTACK;		/* get special stack if necessary */\
  49	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
  50	beq	1f;			/* branch around if supervisor */   \
  51	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
  521:	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
 
  53	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
  54	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
  55
  56/* Exception type-specific macros */
  57#define	GEN_SET_KSTACK							    \
  58	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
  59#define SPRN_GEN_SRR0	SPRN_SRR0
  60#define SPRN_GEN_SRR1	SPRN_SRR1
  61
 
 
 
 
  62#define CRIT_SET_KSTACK						            \
  63	ld	r1,PACA_CRIT_STACK(r13);				    \
  64	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
  65#define SPRN_CRIT_SRR0	SPRN_CSRR0
  66#define SPRN_CRIT_SRR1	SPRN_CSRR1
  67
  68#define DBG_SET_KSTACK						            \
  69	ld	r1,PACA_DBG_STACK(r13);					    \
  70	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
  71#define SPRN_DBG_SRR0	SPRN_DSRR0
  72#define SPRN_DBG_SRR1	SPRN_DSRR1
  73
  74#define MC_SET_KSTACK						            \
  75	ld	r1,PACA_MC_STACK(r13);					    \
  76	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
  77#define SPRN_MC_SRR0	SPRN_MCSRR0
  78#define SPRN_MC_SRR1	SPRN_MCSRR1
  79
  80#define NORMAL_EXCEPTION_PROLOG(n, addition)				    \
  81	EXCEPTION_PROLOG(n, GEN, addition##_GEN(n))
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  82
  83#define CRIT_EXCEPTION_PROLOG(n, addition)				    \
  84	EXCEPTION_PROLOG(n, CRIT, addition##_CRIT(n))
  85
  86#define DBG_EXCEPTION_PROLOG(n, addition)				    \
  87	EXCEPTION_PROLOG(n, DBG, addition##_DBG(n))
  88
  89#define MC_EXCEPTION_PROLOG(n, addition)				    \
  90	EXCEPTION_PROLOG(n, MC, addition##_MC(n))
  91
 
 
  92
  93/* Variants of the "addition" argument for the prolog
  94 */
  95#define PROLOG_ADDITION_NONE_GEN(n)
 
  96#define PROLOG_ADDITION_NONE_CRIT(n)
  97#define PROLOG_ADDITION_NONE_DBG(n)
  98#define PROLOG_ADDITION_NONE_MC(n)
  99
 100#define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
 101	lbz	r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */	    \
 102	cmpwi	cr0,r11,0;		/* yes -> go out of line */	    \
 103	beq	masked_interrupt_book3e_##n
 104
 
 
 
 
 
 
 105#define PROLOG_ADDITION_2REGS_GEN(n)					    \
 106	std	r14,PACA_EXGEN+EX_R14(r13);				    \
 107	std	r15,PACA_EXGEN+EX_R15(r13)
 108
 109#define PROLOG_ADDITION_1REG_GEN(n)					    \
 110	std	r14,PACA_EXGEN+EX_R14(r13);
 111
 112#define PROLOG_ADDITION_2REGS_CRIT(n)					    \
 113	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
 114	std	r15,PACA_EXCRIT+EX_R15(r13)
 115
 116#define PROLOG_ADDITION_2REGS_DBG(n)					    \
 117	std	r14,PACA_EXDBG+EX_R14(r13);				    \
 118	std	r15,PACA_EXDBG+EX_R15(r13)
 119
 120#define PROLOG_ADDITION_2REGS_MC(n)					    \
 121	std	r14,PACA_EXMC+EX_R14(r13);				    \
 122	std	r15,PACA_EXMC+EX_R15(r13)
 123
 124
 125/* Core exception code for all exceptions except TLB misses.
 126 * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
 127 */
 128#define EXCEPTION_COMMON(n, excf, ints)					    \
 129exc_##n##_common:							    \
 130	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
 131	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
 132	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
 133	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
 134	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
 135	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
 136	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
 137	ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */	    \
 138	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
 139	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
 140	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */		    \
 141	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
 142	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
 143	mflr	r6;			/* save LR in stackframe */	    \
 144	mfctr	r7;			/* save CTR in stackframe */	    \
 145	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
 146	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
 147	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
 148	lbz	r11,PACASOFTIRQEN(r13);	/* get current IRQ softe */	    \
 149	ld	r12,exception_marker@toc(r2);				    \
 150	li	r0,0;							    \
 151	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
 152	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
 153	std	r5,GPR13(r1);		/* save it to stackframe */	    \
 154	std	r6,_LINK(r1);						    \
 155	std	r7,_CTR(r1);						    \
 156	std	r8,_XER(r1);						    \
 157	li	r3,(n)+1;		/* indicate partial regs in trap */ \
 158	std	r9,0(r1);		/* store stack frame back link */   \
 159	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
 160	std	r9,GPR1(r1);		/* store stack frame back link */   \
 161	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
 162	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
 163	std	r3,_TRAP(r1);		/* set trap number		*/  \
 164	std	r0,RESULT(r1);		/* clear regs->result */	    \
 165	ints;
 166
 167/* Variants for the "ints" argument. This one does nothing when we want
 168 * to keep interrupts in their original state
 169 */
 170#define INTS_KEEP
 171
 172/* This second version is meant for exceptions that don't immediately
 173 * hard-enable. We set a bit in paca->irq_happened to ensure that
 174 * a subsequent call to arch_local_irq_restore() will properly
 175 * hard-enable and avoid the fast-path
 176 */
 177#define INTS_DISABLE	SOFT_DISABLE_INTS(r3,r4)
 178
 179/* This is called by exceptions that used INTS_KEEP (that did not touch
 180 * irq indicators in the PACA). This will restore MSR:EE to it's previous
 181 * value
 182 *
 183 * XXX In the long run, we may want to open-code it in order to separate the
 184 *     load from the wrtee, thus limiting the latency caused by the dependency
 185 *     but at this point, I'll favor code clarity until we have a near to final
 186 *     implementation
 187 */
 188#define INTS_RESTORE_HARD						    \
 189	ld	r11,_MSR(r1);						    \
 190	wrtee	r11;
 191
 192/* XXX FIXME: Restore r14/r15 when necessary */
 193#define BAD_STACK_TRAMPOLINE(n)						    \
 194exc_##n##_bad_stack:							    \
 195	li	r1,(n);			/* get exception number */	    \
 196	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
 197	b	bad_stack_book3e;	/* bad stack error */
 198
 199/* WARNING: If you change the layout of this stub, make sure you chcek
 200	*   the debug exception handler which handles single stepping
 201	*   into exceptions from userspace, and the MM code in
 202	*   arch/powerpc/mm/tlb_nohash.c which patches the branch here
 203	*   and would need to be updated if that branch is moved
 204	*/
 205#define	EXCEPTION_STUB(loc, label)					\
 206	. = interrupt_base_book3e + loc;				\
 207	nop;	/* To make debug interrupts happy */			\
 208	b	exc_##label##_book3e;
 209
 210#define ACK_NONE(r)
 211#define ACK_DEC(r)							\
 212	lis	r,TSR_DIS@h;						\
 213	mtspr	SPRN_TSR,r
 214#define ACK_FIT(r)							\
 215	lis	r,TSR_FIS@h;						\
 216	mtspr	SPRN_TSR,r
 217
 218/* Used by asynchronous interrupt that may happen in the idle loop.
 219 *
 220 * This check if the thread was in the idle loop, and if yes, returns
 221 * to the caller rather than the PC. This is to avoid a race if
 222 * interrupts happen before the wait instruction.
 223 */
 224#define CHECK_NAPPING()							\
 225	clrrdi	r11,r1,THREAD_SHIFT;					\
 226	ld	r10,TI_LOCAL_FLAGS(r11);				\
 227	andi.	r9,r10,_TLF_NAPPING;					\
 228	beq+	1f;							\
 229	ld	r8,_LINK(r1);						\
 230	rlwinm	r7,r10,0,~_TLF_NAPPING;					\
 231	std	r8,_NIP(r1);						\
 232	std	r7,TI_LOCAL_FLAGS(r11);					\
 2331:
 234
 235
 236#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack)			\
 237	START_EXCEPTION(label);						\
 238	NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE)	\
 239	EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE)		\
 240	ack(r8);							\
 241	CHECK_NAPPING();						\
 242	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
 243	bl	hdlr;							\
 244	b	.ret_from_except_lite;
 245
 246/* This value is used to mark exception frames on the stack. */
 247	.section	".toc","aw"
 248exception_marker:
 249	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
 250
 251
 252/*
 253 * And here we have the exception vectors !
 254 */
 255
 256	.text
 257	.balign	0x1000
 258	.globl interrupt_base_book3e
 259interrupt_base_book3e:					/* fake trap */
 260	EXCEPTION_STUB(0x000, machine_check)		/* 0x0200 */
 261	EXCEPTION_STUB(0x020, critical_input)		/* 0x0580 */
 262	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
 263	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
 264	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
 265	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
 266	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
 267	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
 268	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
 269	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
 270	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
 271	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
 272	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
 273	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 274	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 275	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
 
 
 276	EXCEPTION_STUB(0x260, perfmon)
 277	EXCEPTION_STUB(0x280, doorbell)
 278	EXCEPTION_STUB(0x2a0, doorbell_crit)
 279	EXCEPTION_STUB(0x2c0, guest_doorbell)
 280	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
 281	EXCEPTION_STUB(0x300, hypercall)
 282	EXCEPTION_STUB(0x320, ehpriv)
 
 283
 284	.globl interrupt_end_book3e
 285interrupt_end_book3e:
 286
 287/* Critical Input Interrupt */
 288	START_EXCEPTION(critical_input);
 289	CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
 290//	EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE)
 291//	bl	special_reg_save_crit
 292//	CHECK_NAPPING();
 293//	addi	r3,r1,STACK_FRAME_OVERHEAD
 294//	bl	.critical_exception
 295//	b	ret_from_crit_except
 296	b	.
 297
 298/* Machine Check Interrupt */
 299	START_EXCEPTION(machine_check);
 300	CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
 301//	EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE)
 302//	bl	special_reg_save_mc
 303//	addi	r3,r1,STACK_FRAME_OVERHEAD
 304//	CHECK_NAPPING();
 305//	bl	.machine_check_exception
 306//	b	ret_from_mc_except
 307	b	.
 308
 309/* Data Storage Interrupt */
 310	START_EXCEPTION(data_storage)
 311	NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
 
 312	mfspr	r14,SPRN_DEAR
 313	mfspr	r15,SPRN_ESR
 314	EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_DISABLE)
 
 
 
 
 315	b	storage_fault_common
 316
 317/* Instruction Storage Interrupt */
 318	START_EXCEPTION(instruction_storage);
 319	NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
 
 320	li	r15,0
 321	mr	r14,r10
 322	EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_DISABLE)
 
 
 
 
 323	b	storage_fault_common
 324
 325/* External Input Interrupt */
 326	MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
 
 327
 328/* Alignment */
 329	START_EXCEPTION(alignment);
 330	NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
 
 331	mfspr	r14,SPRN_DEAR
 332	mfspr	r15,SPRN_ESR
 333	EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
 
 
 
 
 334	b	alignment_more	/* no room, go out of line */
 335
 336/* Program Interrupt */
 337	START_EXCEPTION(program);
 338	NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
 
 339	mfspr	r14,SPRN_ESR
 340	EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE)
 341	std	r14,_DSISR(r1)
 
 
 342	addi	r3,r1,STACK_FRAME_OVERHEAD
 343	ld	r14,PACA_EXGEN+EX_R14(r13)
 344	bl	.save_nvgprs
 345	bl	.program_check_exception
 346	b	.ret_from_except
 347
 348/* Floating Point Unavailable Interrupt */
 349	START_EXCEPTION(fp_unavailable);
 350	NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 351	/* we can probably do a shorter exception entry for that one... */
 352	EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
 
 
 353	ld	r12,_MSR(r1)
 354	andi.	r0,r12,MSR_PR;
 355	beq-	1f
 356	bl	.load_up_fpu
 357	b	fast_exception_return
 3581:	INTS_DISABLE
 359	bl	.save_nvgprs
 
 
 
 
 
 
 
 
 
 
 
 360	addi	r3,r1,STACK_FRAME_OVERHEAD
 361	bl	.kernel_fp_unavailable_exception
 362	b	.ret_from_except
 
 
 
 
 
 
 
 
 363
 364/* Decrementer Interrupt */
 365	MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
 
 366
 367/* Fixed Interval Timer Interrupt */
 368	MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
 
 369
 370/* Watchdog Timer Interrupt */
 371	START_EXCEPTION(watchdog);
 372	CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
 373//	EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE)
 374//	bl	special_reg_save_crit
 375//	CHECK_NAPPING();
 376//	addi	r3,r1,STACK_FRAME_OVERHEAD
 377//	bl	.unknown_exception
 378//	b	ret_from_crit_except
 379	b	.
 
 
 
 
 380
 381/* System Call Interrupt */
 382	START_EXCEPTION(system_call)
 383	mr	r9,r13			/* keep a copy of userland r13 */
 384	mfspr	r11,SPRN_SRR0		/* get return address */
 385	mfspr	r12,SPRN_SRR1		/* get previous MSR */
 386	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
 387	b	system_call_common
 388
 389/* Auxiliary Processor Unavailable Interrupt */
 390	START_EXCEPTION(ap_unavailable);
 391	NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
 392	EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_DISABLE)
 393	bl	.save_nvgprs
 394	addi	r3,r1,STACK_FRAME_OVERHEAD
 395	bl	.unknown_exception
 396	b	.ret_from_except
 397
 398/* Debug exception as a critical interrupt*/
 399	START_EXCEPTION(debug_crit);
 400	CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
 
 401
 402	/*
 403	 * If there is a single step or branch-taken exception in an
 404	 * exception entry sequence, it was probably meant to apply to
 405	 * the code where the exception occurred (since exception entry
 406	 * doesn't turn off DE automatically).  We simulate the effect
 407	 * of turning off DE on entry to an exception handler by turning
 408	 * off DE in the CSRR1 value and clearing the debug status.
 409	 */
 410
 411	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
 412	andis.	r15,r14,DBSR_IC@h
 413	beq+	1f
 414
 415	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
 416	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
 
 
 417	cmpld	cr0,r10,r14
 418	cmpld	cr1,r10,r15
 
 
 
 
 
 
 419	blt+	cr0,1f
 420	bge+	cr1,1f
 421
 422	/* here it looks like we got an inappropriate debug exception. */
 423	lis	r14,DBSR_IC@h		/* clear the IC event */
 424	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
 425	mtspr	SPRN_DBSR,r14
 426	mtspr	SPRN_CSRR1,r11
 427	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
 428	ld	r1,PACA_EXCRIT+EX_R1(r13)
 429	ld	r14,PACA_EXCRIT+EX_R14(r13)
 430	ld	r15,PACA_EXCRIT+EX_R15(r13)
 431	mtcr	r10
 432	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
 433	ld	r11,PACA_EXCRIT+EX_R11(r13)
 434	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
 435	rfci
 436
 437	/* Normal debug exception */
 438	/* XXX We only handle coming from userspace for now since we can't
 439	 *     quite save properly an interrupted kernel state yet
 440	 */
 4411:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
 442	beq	kernel_dbg_exc;		/* if from kernel mode */
 443
 444	/* Now we mash up things to make it look like we are coming on a
 445	 * normal exception
 446	 */
 447	mfspr	r15,SPRN_SPRG_CRIT_SCRATCH
 448	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
 449	mfspr	r14,SPRN_DBSR
 450	EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE)
 451	std	r14,_DSISR(r1)
 452	addi	r3,r1,STACK_FRAME_OVERHEAD
 453	mr	r4,r14
 454	ld	r14,PACA_EXCRIT+EX_R14(r13)
 455	ld	r15,PACA_EXCRIT+EX_R15(r13)
 456	bl	.save_nvgprs
 457	bl	.DebugException
 458	b	.ret_from_except
 
 
 459
 460kernel_dbg_exc:
 461	b	.	/* NYI */
 462
 463/* Debug exception as a debug interrupt*/
 464	START_EXCEPTION(debug_debug);
 465	DBG_EXCEPTION_PROLOG(0xd08, PROLOG_ADDITION_2REGS)
 
 466
 467	/*
 468	 * If there is a single step or branch-taken exception in an
 469	 * exception entry sequence, it was probably meant to apply to
 470	 * the code where the exception occurred (since exception entry
 471	 * doesn't turn off DE automatically).  We simulate the effect
 472	 * of turning off DE on entry to an exception handler by turning
 473	 * off DE in the DSRR1 value and clearing the debug status.
 474	 */
 475
 476	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
 477	andis.	r15,r14,DBSR_IC@h
 478	beq+	1f
 479
 480	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
 481	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
 
 
 482	cmpld	cr0,r10,r14
 483	cmpld	cr1,r10,r15
 
 
 
 
 
 
 484	blt+	cr0,1f
 485	bge+	cr1,1f
 486
 487	/* here it looks like we got an inappropriate debug exception. */
 488	lis	r14,DBSR_IC@h		/* clear the IC event */
 489	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
 490	mtspr	SPRN_DBSR,r14
 491	mtspr	SPRN_DSRR1,r11
 492	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
 493	ld	r1,PACA_EXDBG+EX_R1(r13)
 494	ld	r14,PACA_EXDBG+EX_R14(r13)
 495	ld	r15,PACA_EXDBG+EX_R15(r13)
 496	mtcr	r10
 497	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
 498	ld	r11,PACA_EXDBG+EX_R11(r13)
 499	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
 500	rfdi
 501
 502	/* Normal debug exception */
 503	/* XXX We only handle coming from userspace for now since we can't
 504	 *     quite save properly an interrupted kernel state yet
 505	 */
 5061:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
 507	beq	kernel_dbg_exc;		/* if from kernel mode */
 508
 509	/* Now we mash up things to make it look like we are coming on a
 510	 * normal exception
 511	 */
 512	mfspr	r15,SPRN_SPRG_DBG_SCRATCH
 513	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
 514	mfspr	r14,SPRN_DBSR
 515	EXCEPTION_COMMON(0xd08, PACA_EXDBG, INTS_DISABLE)
 516	std	r14,_DSISR(r1)
 517	addi	r3,r1,STACK_FRAME_OVERHEAD
 518	mr	r4,r14
 519	ld	r14,PACA_EXDBG+EX_R14(r13)
 520	ld	r15,PACA_EXDBG+EX_R15(r13)
 521	bl	.save_nvgprs
 522	bl	.DebugException
 523	b	.ret_from_except
 
 
 524
 525	START_EXCEPTION(perfmon);
 526	NORMAL_EXCEPTION_PROLOG(0x260, PROLOG_ADDITION_NONE)
 527	EXCEPTION_COMMON(0x260, PACA_EXGEN, INTS_DISABLE)
 
 
 528	addi	r3,r1,STACK_FRAME_OVERHEAD
 529	bl	.performance_monitor_exception
 530	b	.ret_from_except_lite
 531
 532/* Doorbell interrupt */
 533	MASKABLE_EXCEPTION(0x280, doorbell, .doorbell_exception, ACK_NONE)
 
 534
 535/* Doorbell critical Interrupt */
 536	START_EXCEPTION(doorbell_crit);
 537	CRIT_EXCEPTION_PROLOG(0x2a0, PROLOG_ADDITION_NONE)
 538//	EXCEPTION_COMMON(0x2a0, PACA_EXCRIT, INTS_DISABLE)
 539//	bl	special_reg_save_crit
 540//	CHECK_NAPPING();
 541//	addi	r3,r1,STACK_FRAME_OVERHEAD
 542//	bl	.doorbell_critical_exception
 543//	b	ret_from_crit_except
 544	b	.
 545
 546/* Guest Doorbell */
 547	MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE)
 
 
 
 
 
 
 
 
 
 548
 549/* Guest Doorbell critical Interrupt */
 550	START_EXCEPTION(guest_doorbell_crit);
 551	CRIT_EXCEPTION_PROLOG(0x2e0, PROLOG_ADDITION_NONE)
 552//	EXCEPTION_COMMON(0x2e0, PACA_EXCRIT, INTS_DISABLE)
 553//	bl	special_reg_save_crit
 554//	CHECK_NAPPING();
 555//	addi	r3,r1,STACK_FRAME_OVERHEAD
 556//	bl	.guest_doorbell_critical_exception
 557//	b	ret_from_crit_except
 558	b	.
 559
 560/* Hypervisor call */
 561	START_EXCEPTION(hypercall);
 562	NORMAL_EXCEPTION_PROLOG(0x310, PROLOG_ADDITION_NONE)
 563	EXCEPTION_COMMON(0x310, PACA_EXGEN, INTS_KEEP)
 
 564	addi	r3,r1,STACK_FRAME_OVERHEAD
 565	bl	.save_nvgprs
 566	INTS_RESTORE_HARD
 567	bl	.unknown_exception
 568	b	.ret_from_except
 569
 570/* Embedded Hypervisor priviledged  */
 571	START_EXCEPTION(ehpriv);
 572	NORMAL_EXCEPTION_PROLOG(0x320, PROLOG_ADDITION_NONE)
 573	EXCEPTION_COMMON(0x320, PACA_EXGEN, INTS_KEEP)
 
 
 
 
 
 
 
 
 
 
 574	addi	r3,r1,STACK_FRAME_OVERHEAD
 575	bl	.save_nvgprs
 576	INTS_RESTORE_HARD
 577	bl	.unknown_exception
 578	b	.ret_from_except
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 579
 580/*
 581 * An interrupt came in while soft-disabled; We mark paca->irq_happened
 582 * accordingly and if the interrupt is level sensitive, we hard disable
 
 
 583 */
 584
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 585masked_interrupt_book3e_0x500:
 586	/* XXX When adding support for EPR, use PACA_IRQ_EE_EDGE */
 587	li	r11,PACA_IRQ_EE
 588	b	masked_interrupt_book3e_full_mask
 589
 590masked_interrupt_book3e_0x900:
 591	ACK_DEC(r11);
 592	li	r11,PACA_IRQ_DEC
 593	b	masked_interrupt_book3e_no_mask
 594masked_interrupt_book3e_0x980:
 595	ACK_FIT(r11);
 596	li	r11,PACA_IRQ_DEC
 597	b	masked_interrupt_book3e_no_mask
 598masked_interrupt_book3e_0x280:
 599masked_interrupt_book3e_0x2c0:
 600	li	r11,PACA_IRQ_DBELL
 601	b	masked_interrupt_book3e_no_mask
 602
 603masked_interrupt_book3e_no_mask:
 604	mtcr	r10
 605	lbz	r10,PACAIRQHAPPENED(r13)
 606	or	r10,r10,r11
 607	stb	r10,PACAIRQHAPPENED(r13)
 608	b	1f
 609masked_interrupt_book3e_full_mask:
 610	mtcr	r10
 611	lbz	r10,PACAIRQHAPPENED(r13)
 612	or	r10,r10,r11
 613	stb	r10,PACAIRQHAPPENED(r13)
 614	mfspr	r10,SPRN_SRR1
 615	rldicl	r11,r10,48,1		/* clear MSR_EE */
 616	rotldi	r10,r11,16
 617	mtspr	SPRN_SRR1,r10
 6181:	ld	r10,PACA_EXGEN+EX_R10(r13);
 619	ld	r11,PACA_EXGEN+EX_R11(r13);
 620	mfspr	r13,SPRN_SPRG_GEN_SCRATCH;
 621	rfi
 622	b	.
 623/*
 624 * Called from arch_local_irq_enable when an interrupt needs
 625 * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
 626 * to indicate the kind of interrupt. MSR:EE is already off.
 627 * We generate a stackframe like if a real interrupt had happened.
 628 *
 629 * Note: While MSR:EE is off, we need to make sure that _MSR
 630 * in the generated frame has EE set to 1 or the exception
 631 * handler will not properly re-enable them.
 632 */
 633_GLOBAL(__replay_interrupt)
 634	/* We are going to jump to the exception common code which
 635	 * will retrieve various register values from the PACA which
 636	 * we don't give a damn about.
 637	 */
 638	mflr	r10
 639	mfmsr	r11
 640	mfcr	r4
 641	mtspr	SPRN_SPRG_GEN_SCRATCH,r13;
 642	std	r1,PACA_EXGEN+EX_R1(r13);
 643	stw	r4,PACA_EXGEN+EX_CR(r13);
 644	ori	r11,r11,MSR_EE
 645	subi	r1,r1,INT_FRAME_SIZE;
 646	cmpwi	cr0,r3,0x500
 647	beq	exc_0x500_common
 648	cmpwi	cr0,r3,0x900
 649	beq	exc_0x900_common
 650	cmpwi	cr0,r3,0x280
 651	beq	exc_0x280_common
 652	blr
 653
 654
 655/*
 656 * This is called from 0x300 and 0x400 handlers after the prologs with
 657 * r14 and r15 containing the fault address and error code, with the
 658 * original values stashed away in the PACA
 659 */
 660storage_fault_common:
 661	std	r14,_DAR(r1)
 662	std	r15,_DSISR(r1)
 663	addi	r3,r1,STACK_FRAME_OVERHEAD
 664	mr	r4,r14
 665	mr	r5,r15
 666	ld	r14,PACA_EXGEN+EX_R14(r13)
 667	ld	r15,PACA_EXGEN+EX_R15(r13)
 668	bl	.do_page_fault
 669	cmpdi	r3,0
 670	bne-	1f
 671	b	.ret_from_except_lite
 6721:	bl	.save_nvgprs
 673	mr	r5,r3
 674	addi	r3,r1,STACK_FRAME_OVERHEAD
 675	ld	r4,_DAR(r1)
 676	bl	.bad_page_fault
 677	b	.ret_from_except
 678
 679/*
 680 * Alignment exception doesn't fit entirely in the 0x100 bytes so it
 681 * continues here.
 682 */
 683alignment_more:
 684	std	r14,_DAR(r1)
 685	std	r15,_DSISR(r1)
 686	addi	r3,r1,STACK_FRAME_OVERHEAD
 687	ld	r14,PACA_EXGEN+EX_R14(r13)
 688	ld	r15,PACA_EXGEN+EX_R15(r13)
 689	bl	.save_nvgprs
 690	INTS_RESTORE_HARD
 691	bl	.alignment_exception
 692	b	.ret_from_except
 693
 694/*
 695 * We branch here from entry_64.S for the last stage of the exception
 696 * return code path. MSR:EE is expected to be off at that point
 697 */
 698_GLOBAL(exception_return_book3e)
 699	b	1f
 700
 701/* This is the return from load_up_fpu fast path which could do with
 702 * less GPR restores in fact, but for now we have a single return path
 703 */
 704	.globl fast_exception_return
 705fast_exception_return:
 706	wrteei	0
 7071:	mr	r0,r13
 708	ld	r10,_MSR(r1)
 709	REST_4GPRS(2, r1)
 710	andi.	r6,r10,MSR_PR
 711	REST_2GPRS(6, r1)
 712	beq	1f
 713	ACCOUNT_CPU_USER_EXIT(r10, r11)
 714	ld	r0,GPR13(r1)
 715
 7161:	stdcx.	r0,0,r1		/* to clear the reservation */
 717
 718	ld	r8,_CCR(r1)
 719	ld	r9,_LINK(r1)
 720	ld	r10,_CTR(r1)
 721	ld	r11,_XER(r1)
 722	mtcr	r8
 723	mtlr	r9
 724	mtctr	r10
 725	mtxer	r11
 726	REST_2GPRS(8, r1)
 727	ld	r10,GPR10(r1)
 728	ld	r11,GPR11(r1)
 729	ld	r12,GPR12(r1)
 730	mtspr	SPRN_SPRG_GEN_SCRATCH,r0
 731
 732	std	r10,PACA_EXGEN+EX_R10(r13);
 733	std	r11,PACA_EXGEN+EX_R11(r13);
 734	ld	r10,_NIP(r1)
 735	ld	r11,_MSR(r1)
 736	ld	r0,GPR0(r1)
 737	ld	r1,GPR1(r1)
 738	mtspr	SPRN_SRR0,r10
 739	mtspr	SPRN_SRR1,r11
 740	ld	r10,PACA_EXGEN+EX_R10(r13)
 741	ld	r11,PACA_EXGEN+EX_R11(r13)
 742	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
 743	rfi
 744
 745/*
 746 * Trampolines used when spotting a bad kernel stack pointer in
 747 * the exception entry code.
 748 *
 749 * TODO: move some bits like SRR0 read to trampoline, pass PACA
 750 * index around, etc... to handle crit & mcheck
 751 */
 752BAD_STACK_TRAMPOLINE(0x000)
 753BAD_STACK_TRAMPOLINE(0x100)
 754BAD_STACK_TRAMPOLINE(0x200)
 
 755BAD_STACK_TRAMPOLINE(0x260)
 756BAD_STACK_TRAMPOLINE(0x280)
 757BAD_STACK_TRAMPOLINE(0x2a0)
 758BAD_STACK_TRAMPOLINE(0x2c0)
 759BAD_STACK_TRAMPOLINE(0x2e0)
 760BAD_STACK_TRAMPOLINE(0x300)
 761BAD_STACK_TRAMPOLINE(0x310)
 762BAD_STACK_TRAMPOLINE(0x320)
 
 763BAD_STACK_TRAMPOLINE(0x400)
 764BAD_STACK_TRAMPOLINE(0x500)
 765BAD_STACK_TRAMPOLINE(0x600)
 766BAD_STACK_TRAMPOLINE(0x700)
 767BAD_STACK_TRAMPOLINE(0x800)
 768BAD_STACK_TRAMPOLINE(0x900)
 769BAD_STACK_TRAMPOLINE(0x980)
 770BAD_STACK_TRAMPOLINE(0x9f0)
 771BAD_STACK_TRAMPOLINE(0xa00)
 772BAD_STACK_TRAMPOLINE(0xb00)
 773BAD_STACK_TRAMPOLINE(0xc00)
 774BAD_STACK_TRAMPOLINE(0xd00)
 775BAD_STACK_TRAMPOLINE(0xd08)
 776BAD_STACK_TRAMPOLINE(0xe00)
 777BAD_STACK_TRAMPOLINE(0xf00)
 778BAD_STACK_TRAMPOLINE(0xf20)
 779
 780	.globl	bad_stack_book3e
 781bad_stack_book3e:
 782	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
 783	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
 784	ld	r1,PACAEMERGSP(r13)
 785	subi	r1,r1,64+INT_FRAME_SIZE
 786	std	r10,_NIP(r1)
 787	std	r11,_MSR(r1)
 788	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
 789	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
 790	std	r10,GPR1(r1)
 791	std	r11,_CCR(r1)
 792	mfspr	r10,SPRN_DEAR
 793	mfspr	r11,SPRN_ESR
 794	std	r10,_DAR(r1)
 795	std	r11,_DSISR(r1)
 796	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
 797	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
 798	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
 799	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
 800	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
 801	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
 802	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
 803	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
 804	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
 805	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
 806	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
 807	std	r5,GPR13(r1);		/* save it to stackframe */	    \
 808	mflr	r10
 809	mfctr	r11
 810	mfxer	r12
 811	std	r10,_LINK(r1)
 812	std	r11,_CTR(r1)
 813	std	r12,_XER(r1)
 814	SAVE_10GPRS(14,r1)
 815	SAVE_8GPRS(24,r1)
 816	lhz	r12,PACA_TRAP_SAVE(r13)
 817	std	r12,_TRAP(r1)
 818	addi	r11,r1,INT_FRAME_SIZE
 819	std	r11,0(r1)
 820	li	r12,0
 821	std	r12,0(r11)
 822	ld	r2,PACATOC(r13)
 8231:	addi	r3,r1,STACK_FRAME_OVERHEAD
 824	bl	.kernel_bad_stack
 825	b	1b
 826
 827/*
 828 * Setup the initial TLB for a core. This current implementation
 829 * assume that whatever we are running off will not conflict with
 830 * the new mapping at PAGE_OFFSET.
 831 */
 832_GLOBAL(initial_tlb_book3e)
 833
 834	/* Look for the first TLB with IPROT set */
 835	mfspr	r4,SPRN_TLB0CFG
 836	andi.	r3,r4,TLBnCFG_IPROT
 837	lis	r3,MAS0_TLBSEL(0)@h
 838	bne	found_iprot
 839
 840	mfspr	r4,SPRN_TLB1CFG
 841	andi.	r3,r4,TLBnCFG_IPROT
 842	lis	r3,MAS0_TLBSEL(1)@h
 843	bne	found_iprot
 844
 845	mfspr	r4,SPRN_TLB2CFG
 846	andi.	r3,r4,TLBnCFG_IPROT
 847	lis	r3,MAS0_TLBSEL(2)@h
 848	bne	found_iprot
 849
 850	lis	r3,MAS0_TLBSEL(3)@h
 851	mfspr	r4,SPRN_TLB3CFG
 852	/* fall through */
 853
 854found_iprot:
 855	andi.	r5,r4,TLBnCFG_HES
 856	bne	have_hes
 857
 858	mflr	r8				/* save LR */
 859/* 1. Find the index of the entry we're executing in
 860 *
 861 * r3 = MAS0_TLBSEL (for the iprot array)
 862 * r4 = SPRN_TLBnCFG
 863 */
 864	bl	invstr				/* Find our address */
 865invstr:	mflr	r6				/* Make it accessible */
 866	mfmsr	r7
 867	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
 868	mfspr	r7,SPRN_PID
 869	slwi	r7,r7,16
 870	or	r7,r7,r5
 871	mtspr	SPRN_MAS6,r7
 872	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
 873
 874	mfspr	r3,SPRN_MAS0
 875	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
 876
 877	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
 878	oris	r7,r7,MAS1_IPROT@h
 879	mtspr	SPRN_MAS1,r7
 880	tlbwe
 881
 882/* 2. Invalidate all entries except the entry we're executing in
 883 *
 884 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
 885 * r4 = SPRN_TLBnCFG
 886 * r5 = ESEL of entry we are running in
 887 */
 888	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
 889	li	r6,0				/* Set Entry counter to 0 */
 8901:	mr	r7,r3				/* Set MAS0(TLBSEL) */
 891	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
 892	mtspr	SPRN_MAS0,r7
 893	tlbre
 894	mfspr	r7,SPRN_MAS1
 895	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
 896	cmpw	r5,r6
 897	beq	skpinv				/* Dont update the current execution TLB */
 898	mtspr	SPRN_MAS1,r7
 899	tlbwe
 900	isync
 901skpinv:	addi	r6,r6,1				/* Increment */
 902	cmpw	r6,r4				/* Are we done? */
 903	bne	1b				/* If not, repeat */
 904
 905	/* Invalidate all TLBs */
 906	PPC_TLBILX_ALL(0,0)
 907	sync
 908	isync
 909
 910/* 3. Setup a temp mapping and jump to it
 911 *
 912 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
 913 * r5 = ESEL of entry we are running in
 914 */
 915	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
 916	addi	r7,r7,0x1
 917	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
 918	mtspr	SPRN_MAS0,r4
 919	tlbre
 920
 921	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
 922	mtspr	SPRN_MAS0,r4
 923
 924	mfspr	r7,SPRN_MAS1
 925	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
 926	mtspr	SPRN_MAS1,r6
 927
 928	tlbwe
 929
 930	mfmsr	r6
 931	xori	r6,r6,MSR_IS
 932	mtspr	SPRN_SRR1,r6
 933	bl	1f		/* Find our address */
 9341:	mflr	r6
 935	addi	r6,r6,(2f - 1b)
 936	mtspr	SPRN_SRR0,r6
 937	rfi
 9382:
 939
 940/* 4. Clear out PIDs & Search info
 941 *
 942 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
 943 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
 944 * r5 = MAS3
 945 */
 946	li	r6,0
 947	mtspr   SPRN_MAS6,r6
 948	mtspr	SPRN_PID,r6
 949
 950/* 5. Invalidate mapping we started in
 951 *
 952 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
 953 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
 954 * r5 = MAS3
 955 */
 956	mtspr	SPRN_MAS0,r3
 957	tlbre
 958	mfspr	r6,SPRN_MAS1
 959	rlwinm	r6,r6,0,2,0	/* clear IPROT */
 960	mtspr	SPRN_MAS1,r6
 961	tlbwe
 962
 963	/* Invalidate TLB1 */
 964	PPC_TLBILX_ALL(0,0)
 965	sync
 966	isync
 967
 968/* The mapping only needs to be cache-coherent on SMP */
 969#ifdef CONFIG_SMP
 970#define M_IF_SMP	MAS2_M
 971#else
 972#define M_IF_SMP	0
 973#endif
 974
 975/* 6. Setup KERNELBASE mapping in TLB[0]
 976 *
 977 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
 978 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
 979 * r5 = MAS3
 980 */
 981	rlwinm	r3,r3,0,16,3	/* clear ESEL */
 982	mtspr	SPRN_MAS0,r3
 983	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
 984	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
 985	mtspr	SPRN_MAS1,r6
 986
 987	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
 988	mtspr	SPRN_MAS2,r6
 989
 990	rlwinm	r5,r5,0,0,25
 991	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
 992	mtspr	SPRN_MAS3,r5
 993	li	r5,-1
 994	rlwinm	r5,r5,0,0,25
 995
 996	tlbwe
 997
 998/* 7. Jump to KERNELBASE mapping
 999 *
1000 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1001 */
1002	/* Now we branch the new virtual address mapped by this entry */
1003	LOAD_REG_IMMEDIATE(r6,2f)
 
 
 
1004	lis	r7,MSR_KERNEL@h
1005	ori	r7,r7,MSR_KERNEL@l
1006	mtspr	SPRN_SRR0,r6
1007	mtspr	SPRN_SRR1,r7
1008	rfi				/* start execution out of TLB1[0] entry */
10092:
1010
1011/* 8. Clear out the temp mapping
1012 *
1013 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1014 */
1015	mtspr	SPRN_MAS0,r4
1016	tlbre
1017	mfspr	r5,SPRN_MAS1
1018	rlwinm	r5,r5,0,2,0	/* clear IPROT */
1019	mtspr	SPRN_MAS1,r5
1020	tlbwe
1021
1022	/* Invalidate TLB1 */
1023	PPC_TLBILX_ALL(0,0)
1024	sync
1025	isync
1026
1027	/* We translate LR and return */
1028	tovirt(r8,r8)
1029	mtlr	r8
1030	blr
1031
1032have_hes:
1033	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
1034	 * kernel linear mapping. We also set MAS8 once for all here though
1035	 * that will have to be made dependent on whether we are running under
1036	 * a hypervisor I suppose.
1037	 */
1038
1039	/* BEWARE, MAGIC
1040	 * This code is called as an ordinary function on the boot CPU. But to
1041	 * avoid duplication, this code is also used in SCOM bringup of
1042	 * secondary CPUs. We read the code between the initial_tlb_code_start
1043	 * and initial_tlb_code_end labels one instruction at a time and RAM it
1044	 * into the new core via SCOM. That doesn't process branches, so there
1045	 * must be none between those two labels. It also means if this code
1046	 * ever takes any parameters, the SCOM code must also be updated to
1047	 * provide them.
1048	 */
1049	.globl a2_tlbinit_code_start
1050a2_tlbinit_code_start:
1051
1052	ori	r11,r3,MAS0_WQ_ALLWAYS
1053	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
1054	mtspr	SPRN_MAS0,r11
1055	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
1056	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
1057	mtspr	SPRN_MAS1,r3
1058	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
1059	mtspr	SPRN_MAS2,r3
1060	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
1061	mtspr	SPRN_MAS7_MAS3,r3
1062	li	r3,0
1063	mtspr	SPRN_MAS8,r3
1064
1065	/* Write the TLB entry */
1066	tlbwe
1067
1068	.globl a2_tlbinit_after_linear_map
1069a2_tlbinit_after_linear_map:
1070
1071	/* Now we branch the new virtual address mapped by this entry */
1072	LOAD_REG_IMMEDIATE(r3,1f)
 
 
 
 
 
1073	mtctr	r3
1074	bctr
1075
10761:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
1077	 * else (including IPROTed things left by firmware)
1078	 * r4 = TLBnCFG
1079	 * r3 = current address (more or less)
1080	 */
1081
1082	li	r5,0
1083	mtspr	SPRN_MAS6,r5
1084	tlbsx	0,r3
1085
1086	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
1087	rlwinm	r10,r4,8,0xff
1088	addi	r10,r10,-1	/* Get inner loop mask */
1089
1090	li	r3,1
1091
1092	mfspr	r5,SPRN_MAS1
1093	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
1094
1095	mfspr	r6,SPRN_MAS2
1096	rldicr	r6,r6,0,51		/* Extract EPN */
1097
1098	mfspr	r7,SPRN_MAS0
1099	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
1100
1101	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
1102
11032:	add	r4,r3,r8
1104	and	r4,r4,r10
1105
1106	rlwimi	r7,r4,16,MAS0_ESEL_MASK
1107
1108	mtspr	SPRN_MAS0,r7
1109	mtspr	SPRN_MAS1,r5
1110	mtspr	SPRN_MAS2,r6
1111	tlbwe
1112
1113	addi	r3,r3,1
1114	and.	r4,r3,r10
1115
1116	bne	3f
1117	addis	r6,r6,(1<<30)@h
11183:
1119	cmpw	r3,r9
1120	blt	2b
1121
1122	.globl  a2_tlbinit_after_iprot_flush
1123a2_tlbinit_after_iprot_flush:
1124
1125#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
1126	/* Now establish early debug mappings if applicable */
1127	/* Restore the MAS0 we used for linear mapping load */
1128	mtspr	SPRN_MAS0,r11
1129
1130	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
1131	ori	r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
1132	mtspr	SPRN_MAS1,r3
1133	LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
1134	mtspr	SPRN_MAS2,r3
1135	LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
1136	mtspr	SPRN_MAS7_MAS3,r3
1137	/* re-use the MAS8 value from the linear mapping */
1138	tlbwe
1139#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
1140
1141	PPC_TLBILX(0,0,0)
1142	sync
1143	isync
1144
1145	.globl a2_tlbinit_code_end
1146a2_tlbinit_code_end:
1147
1148	/* We translate LR and return */
1149	mflr	r3
1150	tovirt(r3,r3)
1151	mtlr	r3
1152	blr
1153
1154/*
1155 * Main entry (boot CPU, thread 0)
1156 *
1157 * We enter here from head_64.S, possibly after the prom_init trampoline
1158 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
1159 * mode. Anything else is as it was left by the bootloader
1160 *
1161 * Initial requirements of this port:
1162 *
1163 * - Kernel loaded at 0 physical
1164 * - A good lump of memory mapped 0:0 by UTLB entry 0
1165 * - MSR:IS & MSR:DS set to 0
1166 *
1167 * Note that some of the above requirements will be relaxed in the future
1168 * as the kernel becomes smarter at dealing with different initial conditions
1169 * but for now you have to be careful
1170 */
1171_GLOBAL(start_initialization_book3e)
1172	mflr	r28
1173
1174	/* First, we need to setup some initial TLBs to map the kernel
1175	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
1176	 * and always use AS 0, so we just set it up to match our link
1177	 * address and never use 0 based addresses.
1178	 */
1179	bl	.initial_tlb_book3e
1180
1181	/* Init global core bits */
1182	bl	.init_core_book3e
1183
1184	/* Init per-thread bits */
1185	bl	.init_thread_book3e
1186
1187	/* Return to common init code */
1188	tovirt(r28,r28)
1189	mtlr	r28
1190	blr
1191
1192
1193/*
1194 * Secondary core/processor entry
1195 *
1196 * This is entered for thread 0 of a secondary core, all other threads
1197 * are expected to be stopped. It's similar to start_initialization_book3e
1198 * except that it's generally entered from the holding loop in head_64.S
1199 * after CPUs have been gathered by Open Firmware.
1200 *
1201 * We assume we are in 32 bits mode running with whatever TLB entry was
1202 * set for us by the firmware or POR engine.
1203 */
1204_GLOBAL(book3e_secondary_core_init_tlb_set)
1205	li	r4,1
1206	b	.generic_secondary_smp_init
1207
1208_GLOBAL(book3e_secondary_core_init)
1209	mflr	r28
1210
1211	/* Do we need to setup initial TLB entry ? */
1212	cmplwi	r4,0
1213	bne	2f
1214
1215	/* Setup TLB for this core */
1216	bl	.initial_tlb_book3e
1217
1218	/* We can return from the above running at a different
1219	 * address, so recalculate r2 (TOC)
1220	 */
1221	bl	.relative_toc
1222
1223	/* Init global core bits */
12242:	bl	.init_core_book3e
1225
1226	/* Init per-thread bits */
12273:	bl	.init_thread_book3e
1228
1229	/* Return to common init code at proper virtual address.
1230	 *
1231	 * Due to various previous assumptions, we know we entered this
1232	 * function at either the final PAGE_OFFSET mapping or using a
1233	 * 1:1 mapping at 0, so we don't bother doing a complicated check
1234	 * here, we just ensure the return address has the right top bits.
1235	 *
1236	 * Note that if we ever want to be smarter about where we can be
1237	 * started from, we have to be careful that by the time we reach
1238	 * the code below we may already be running at a different location
1239	 * than the one we were called from since initial_tlb_book3e can
1240	 * have moved us already.
1241	 */
1242	cmpdi	cr0,r28,0
1243	blt	1f
1244	lis	r3,PAGE_OFFSET@highest
1245	sldi	r3,r3,32
1246	or	r28,r28,r3
12471:	mtlr	r28
1248	blr
1249
1250_GLOBAL(book3e_secondary_thread_init)
1251	mflr	r28
1252	b	3b
1253
1254_STATIC(init_core_book3e)
 
1255	/* Establish the interrupt vector base */
1256	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
 
1257	mtspr	SPRN_IVPR,r3
1258	sync
1259	blr
1260
1261_STATIC(init_thread_book3e)
1262	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
1263	mtspr	SPRN_EPCR,r3
1264
1265	/* Make sure interrupts are off */
1266	wrteei	0
1267
1268	/* disable all timers and clear out status */
1269	li	r3,0
1270	mtspr	SPRN_TCR,r3
1271	mfspr	r3,SPRN_TSR
1272	mtspr	SPRN_TSR,r3
1273
1274	blr
1275
1276_GLOBAL(__setup_base_ivors)
1277	SET_IVOR(0, 0x020) /* Critical Input */
1278	SET_IVOR(1, 0x000) /* Machine Check */
1279	SET_IVOR(2, 0x060) /* Data Storage */ 
1280	SET_IVOR(3, 0x080) /* Instruction Storage */
1281	SET_IVOR(4, 0x0a0) /* External Input */ 
1282	SET_IVOR(5, 0x0c0) /* Alignment */ 
1283	SET_IVOR(6, 0x0e0) /* Program */ 
1284	SET_IVOR(7, 0x100) /* FP Unavailable */ 
1285	SET_IVOR(8, 0x120) /* System Call */ 
1286	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ 
1287	SET_IVOR(10, 0x160) /* Decrementer */ 
1288	SET_IVOR(11, 0x180) /* Fixed Interval Timer */ 
1289	SET_IVOR(12, 0x1a0) /* Watchdog Timer */ 
1290	SET_IVOR(13, 0x1c0) /* Data TLB Error */ 
1291	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
1292	SET_IVOR(15, 0x040) /* Debug */
1293
1294	sync
1295
1296	blr
1297
 
 
 
 
 
1298_GLOBAL(setup_perfmon_ivor)
1299	SET_IVOR(35, 0x260) /* Performance Monitor */
1300	blr
1301
1302_GLOBAL(setup_doorbell_ivors)
1303	SET_IVOR(36, 0x280) /* Processor Doorbell */
1304	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
 
1305
1306	/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
1307	mfspr	r10,SPRN_MMUCFG
1308	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
1309	beqlr
1310
1311	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
1312	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
1313	blr
1314
1315_GLOBAL(setup_ehv_ivors)
1316	/*
1317	 * We may be running as a guest and lack E.HV even on a chip
1318	 * that normally has it.
1319	 */
1320	mfspr	r10,SPRN_MMUCFG
1321	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
1322	beqlr
1323
1324	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
1325	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
1326	blr