Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2008, 2009 open80211s Ltd.
4 * Copyright (C) 2019 Intel Corporation
5 * Author: Luis Carlos Cobo <luisca@cozybit.com>
6 */
7#include <linux/gfp.h>
8#include <linux/kernel.h>
9#include <linux/random.h>
10#include <linux/rculist.h>
11
12#include "ieee80211_i.h"
13#include "rate.h"
14#include "mesh.h"
15
16#define PLINK_CNF_AID(mgmt) ((mgmt)->u.action.u.self_prot.variable + 2)
17#define PLINK_GET_LLID(p) (p + 2)
18#define PLINK_GET_PLID(p) (p + 4)
19
20#define mod_plink_timer(s, t) (mod_timer(&s->mesh->plink_timer, \
21 jiffies + msecs_to_jiffies(t)))
22
23enum plink_event {
24 PLINK_UNDEFINED,
25 OPN_ACPT,
26 OPN_RJCT,
27 OPN_IGNR,
28 CNF_ACPT,
29 CNF_RJCT,
30 CNF_IGNR,
31 CLS_ACPT,
32 CLS_IGNR
33};
34
35static const char * const mplstates[] = {
36 [NL80211_PLINK_LISTEN] = "LISTEN",
37 [NL80211_PLINK_OPN_SNT] = "OPN-SNT",
38 [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD",
39 [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD",
40 [NL80211_PLINK_ESTAB] = "ESTAB",
41 [NL80211_PLINK_HOLDING] = "HOLDING",
42 [NL80211_PLINK_BLOCKED] = "BLOCKED"
43};
44
45static const char * const mplevents[] = {
46 [PLINK_UNDEFINED] = "NONE",
47 [OPN_ACPT] = "OPN_ACPT",
48 [OPN_RJCT] = "OPN_RJCT",
49 [OPN_IGNR] = "OPN_IGNR",
50 [CNF_ACPT] = "CNF_ACPT",
51 [CNF_RJCT] = "CNF_RJCT",
52 [CNF_IGNR] = "CNF_IGNR",
53 [CLS_ACPT] = "CLS_ACPT",
54 [CLS_IGNR] = "CLS_IGNR"
55};
56
57/* We only need a valid sta if user configured a minimum rssi_threshold. */
58static bool rssi_threshold_check(struct ieee80211_sub_if_data *sdata,
59 struct sta_info *sta)
60{
61 s32 rssi_threshold = sdata->u.mesh.mshcfg.rssi_threshold;
62 return rssi_threshold == 0 ||
63 (sta &&
64 (s8)-ewma_signal_read(&sta->rx_stats_avg.signal) >
65 rssi_threshold);
66}
67
68/**
69 * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
70 *
71 * @sta: mesh peer link to restart
72 *
73 * Locking: this function must be called holding sta->mesh->plink_lock
74 */
75static inline void mesh_plink_fsm_restart(struct sta_info *sta)
76{
77 lockdep_assert_held(&sta->mesh->plink_lock);
78 sta->mesh->plink_state = NL80211_PLINK_LISTEN;
79 sta->mesh->llid = sta->mesh->plid = sta->mesh->reason = 0;
80 sta->mesh->plink_retries = 0;
81}
82
83/*
84 * mesh_set_short_slot_time - enable / disable ERP short slot time.
85 *
86 * The standard indirectly mandates mesh STAs to turn off short slot time by
87 * disallowing advertising this (802.11-2012 8.4.1.4), but that doesn't mean we
88 * can't be sneaky about it. Enable short slot time if all mesh STAs in the
89 * MBSS support ERP rates.
90 *
91 * Returns BSS_CHANGED_ERP_SLOT or 0 for no change.
92 */
93static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata)
94{
95 struct ieee80211_local *local = sdata->local;
96 struct ieee80211_supported_band *sband;
97 struct sta_info *sta;
98 u32 erp_rates = 0, changed = 0;
99 int i;
100 bool short_slot = false;
101
102 sband = ieee80211_get_sband(sdata);
103 if (!sband)
104 return changed;
105
106 if (sband->band == NL80211_BAND_5GHZ) {
107 /* (IEEE 802.11-2012 19.4.5) */
108 short_slot = true;
109 goto out;
110 } else if (sband->band != NL80211_BAND_2GHZ) {
111 goto out;
112 }
113
114 for (i = 0; i < sband->n_bitrates; i++)
115 if (sband->bitrates[i].flags & IEEE80211_RATE_ERP_G)
116 erp_rates |= BIT(i);
117
118 if (!erp_rates)
119 goto out;
120
121 rcu_read_lock();
122 list_for_each_entry_rcu(sta, &local->sta_list, list) {
123 if (sdata != sta->sdata ||
124 sta->mesh->plink_state != NL80211_PLINK_ESTAB)
125 continue;
126
127 short_slot = false;
128 if (erp_rates & sta->sta.supp_rates[sband->band])
129 short_slot = true;
130 else
131 break;
132 }
133 rcu_read_unlock();
134
135out:
136 if (sdata->vif.bss_conf.use_short_slot != short_slot) {
137 sdata->vif.bss_conf.use_short_slot = short_slot;
138 changed = BSS_CHANGED_ERP_SLOT;
139 mpl_dbg(sdata, "mesh_plink %pM: ERP short slot time %d\n",
140 sdata->vif.addr, short_slot);
141 }
142 return changed;
143}
144
145/**
146 * mesh_set_ht_prot_mode - set correct HT protection mode
147 * @sdata: the (mesh) interface to handle
148 *
149 * Section 9.23.3.5 of IEEE 80211-2012 describes the protection rules for HT
150 * mesh STA in a MBSS. Three HT protection modes are supported for now, non-HT
151 * mixed mode, 20MHz-protection and no-protection mode. non-HT mixed mode is
152 * selected if any non-HT peers are present in our MBSS. 20MHz-protection mode
153 * is selected if all peers in our 20/40MHz MBSS support HT and at least one
154 * HT20 peer is present. Otherwise no-protection mode is selected.
155 */
156static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
157{
158 struct ieee80211_local *local = sdata->local;
159 struct sta_info *sta;
160 u16 ht_opmode;
161 bool non_ht_sta = false, ht20_sta = false;
162
163 switch (sdata->vif.bss_conf.chandef.width) {
164 case NL80211_CHAN_WIDTH_20_NOHT:
165 case NL80211_CHAN_WIDTH_5:
166 case NL80211_CHAN_WIDTH_10:
167 return 0;
168 default:
169 break;
170 }
171
172 rcu_read_lock();
173 list_for_each_entry_rcu(sta, &local->sta_list, list) {
174 if (sdata != sta->sdata ||
175 sta->mesh->plink_state != NL80211_PLINK_ESTAB)
176 continue;
177
178 if (sta->sta.bandwidth > IEEE80211_STA_RX_BW_20)
179 continue;
180
181 if (!sta->sta.ht_cap.ht_supported) {
182 mpl_dbg(sdata, "nonHT sta (%pM) is present\n",
183 sta->sta.addr);
184 non_ht_sta = true;
185 break;
186 }
187
188 mpl_dbg(sdata, "HT20 sta (%pM) is present\n", sta->sta.addr);
189 ht20_sta = true;
190 }
191 rcu_read_unlock();
192
193 if (non_ht_sta)
194 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED;
195 else if (ht20_sta &&
196 sdata->vif.bss_conf.chandef.width > NL80211_CHAN_WIDTH_20)
197 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_20MHZ;
198 else
199 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
200
201 if (sdata->vif.bss_conf.ht_operation_mode == ht_opmode)
202 return 0;
203
204 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
205 sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
206 mpl_dbg(sdata, "selected new HT protection mode %d\n", ht_opmode);
207 return BSS_CHANGED_HT;
208}
209
210static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
211 struct sta_info *sta,
212 enum ieee80211_self_protected_actioncode action,
213 u8 *da, u16 llid, u16 plid, u16 reason)
214{
215 struct ieee80211_local *local = sdata->local;
216 struct sk_buff *skb;
217 struct ieee80211_tx_info *info;
218 struct ieee80211_mgmt *mgmt;
219 bool include_plid = false;
220 u16 peering_proto = 0;
221 u8 *pos, ie_len = 4;
222 u8 ie_len_he_cap;
223 int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.self_prot);
224 int err = -ENOMEM;
225
226 ie_len_he_cap = ieee80211_ie_len_he_cap(sdata,
227 NL80211_IFTYPE_MESH_POINT);
228 skb = dev_alloc_skb(local->tx_headroom +
229 hdr_len +
230 2 + /* capability info */
231 2 + /* AID */
232 2 + 8 + /* supported rates */
233 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
234 2 + sdata->u.mesh.mesh_id_len +
235 2 + sizeof(struct ieee80211_meshconf_ie) +
236 2 + sizeof(struct ieee80211_ht_cap) +
237 2 + sizeof(struct ieee80211_ht_operation) +
238 2 + sizeof(struct ieee80211_vht_cap) +
239 2 + sizeof(struct ieee80211_vht_operation) +
240 ie_len_he_cap +
241 2 + 1 + sizeof(struct ieee80211_he_operation) +
242 sizeof(struct ieee80211_he_6ghz_oper) +
243 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) +
244 2 + 8 + /* peering IE */
245 sdata->u.mesh.ie_len);
246 if (!skb)
247 return err;
248 info = IEEE80211_SKB_CB(skb);
249 skb_reserve(skb, local->tx_headroom);
250 mgmt = skb_put_zero(skb, hdr_len);
251 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
252 IEEE80211_STYPE_ACTION);
253 memcpy(mgmt->da, da, ETH_ALEN);
254 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
255 memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
256 mgmt->u.action.category = WLAN_CATEGORY_SELF_PROTECTED;
257 mgmt->u.action.u.self_prot.action_code = action;
258
259 if (action != WLAN_SP_MESH_PEERING_CLOSE) {
260 struct ieee80211_supported_band *sband;
261 enum nl80211_band band;
262
263 sband = ieee80211_get_sband(sdata);
264 if (!sband) {
265 err = -EINVAL;
266 goto free;
267 }
268 band = sband->band;
269
270 /* capability info */
271 pos = skb_put_zero(skb, 2);
272 if (action == WLAN_SP_MESH_PEERING_CONFIRM) {
273 /* AID */
274 pos = skb_put(skb, 2);
275 put_unaligned_le16(sta->sta.aid, pos);
276 }
277 if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
278 ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
279 mesh_add_rsn_ie(sdata, skb) ||
280 mesh_add_meshid_ie(sdata, skb) ||
281 mesh_add_meshconf_ie(sdata, skb))
282 goto free;
283 } else { /* WLAN_SP_MESH_PEERING_CLOSE */
284 info->flags |= IEEE80211_TX_CTL_NO_ACK;
285 if (mesh_add_meshid_ie(sdata, skb))
286 goto free;
287 }
288
289 /* Add Mesh Peering Management element */
290 switch (action) {
291 case WLAN_SP_MESH_PEERING_OPEN:
292 break;
293 case WLAN_SP_MESH_PEERING_CONFIRM:
294 ie_len += 2;
295 include_plid = true;
296 break;
297 case WLAN_SP_MESH_PEERING_CLOSE:
298 if (plid) {
299 ie_len += 2;
300 include_plid = true;
301 }
302 ie_len += 2; /* reason code */
303 break;
304 default:
305 err = -EINVAL;
306 goto free;
307 }
308
309 if (WARN_ON(skb_tailroom(skb) < 2 + ie_len))
310 goto free;
311
312 pos = skb_put(skb, 2 + ie_len);
313 *pos++ = WLAN_EID_PEER_MGMT;
314 *pos++ = ie_len;
315 memcpy(pos, &peering_proto, 2);
316 pos += 2;
317 put_unaligned_le16(llid, pos);
318 pos += 2;
319 if (include_plid) {
320 put_unaligned_le16(plid, pos);
321 pos += 2;
322 }
323 if (action == WLAN_SP_MESH_PEERING_CLOSE) {
324 put_unaligned_le16(reason, pos);
325 pos += 2;
326 }
327
328 if (action != WLAN_SP_MESH_PEERING_CLOSE) {
329 if (mesh_add_ht_cap_ie(sdata, skb) ||
330 mesh_add_ht_oper_ie(sdata, skb) ||
331 mesh_add_vht_cap_ie(sdata, skb) ||
332 mesh_add_vht_oper_ie(sdata, skb) ||
333 mesh_add_he_cap_ie(sdata, skb, ie_len_he_cap) ||
334 mesh_add_he_oper_ie(sdata, skb) ||
335 mesh_add_he_6ghz_cap_ie(sdata, skb))
336 goto free;
337 }
338
339 if (mesh_add_vendor_ies(sdata, skb))
340 goto free;
341
342 ieee80211_tx_skb(sdata, skb);
343 return 0;
344free:
345 kfree_skb(skb);
346 return err;
347}
348
349/**
350 * __mesh_plink_deactivate - deactivate mesh peer link
351 *
352 * @sta: mesh peer link to deactivate
353 *
354 * Mesh paths with this peer as next hop should be flushed
355 * by the caller outside of plink_lock.
356 *
357 * Returns beacon changed flag if the beacon content changed.
358 *
359 * Locking: the caller must hold sta->mesh->plink_lock
360 */
361static u32 __mesh_plink_deactivate(struct sta_info *sta)
362{
363 struct ieee80211_sub_if_data *sdata = sta->sdata;
364 u32 changed = 0;
365
366 lockdep_assert_held(&sta->mesh->plink_lock);
367
368 if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
369 changed = mesh_plink_dec_estab_count(sdata);
370 sta->mesh->plink_state = NL80211_PLINK_BLOCKED;
371
372 ieee80211_mps_sta_status_update(sta);
373 changed |= ieee80211_mps_set_sta_local_pm(sta,
374 NL80211_MESH_POWER_UNKNOWN);
375
376 return changed;
377}
378
379/**
380 * mesh_plink_deactivate - deactivate mesh peer link
381 *
382 * @sta: mesh peer link to deactivate
383 *
384 * All mesh paths with this peer as next hop will be flushed
385 */
386u32 mesh_plink_deactivate(struct sta_info *sta)
387{
388 struct ieee80211_sub_if_data *sdata = sta->sdata;
389 u32 changed;
390
391 spin_lock_bh(&sta->mesh->plink_lock);
392 changed = __mesh_plink_deactivate(sta);
393
394 if (!sdata->u.mesh.user_mpm) {
395 sta->mesh->reason = WLAN_REASON_MESH_PEER_CANCELED;
396 mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_CLOSE,
397 sta->sta.addr, sta->mesh->llid,
398 sta->mesh->plid, sta->mesh->reason);
399 }
400 spin_unlock_bh(&sta->mesh->plink_lock);
401 if (!sdata->u.mesh.user_mpm)
402 del_timer_sync(&sta->mesh->plink_timer);
403 mesh_path_flush_by_nexthop(sta);
404
405 /* make sure no readers can access nexthop sta from here on */
406 synchronize_net();
407
408 return changed;
409}
410
411static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
412 struct sta_info *sta,
413 struct ieee802_11_elems *elems)
414{
415 struct ieee80211_local *local = sdata->local;
416 struct ieee80211_supported_band *sband;
417 u32 rates, basic_rates = 0, changed = 0;
418 enum ieee80211_sta_rx_bandwidth bw = sta->sta.bandwidth;
419
420 sband = ieee80211_get_sband(sdata);
421 if (!sband)
422 return;
423
424 rates = ieee80211_sta_get_rates(sdata, elems, sband->band,
425 &basic_rates);
426
427 spin_lock_bh(&sta->mesh->plink_lock);
428 sta->rx_stats.last_rx = jiffies;
429
430 /* rates and capabilities don't change during peering */
431 if (sta->mesh->plink_state == NL80211_PLINK_ESTAB &&
432 sta->mesh->processed_beacon)
433 goto out;
434 sta->mesh->processed_beacon = true;
435
436 if (sta->sta.supp_rates[sband->band] != rates)
437 changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
438 sta->sta.supp_rates[sband->band] = rates;
439
440 if (ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
441 elems->ht_cap_elem, sta))
442 changed |= IEEE80211_RC_BW_CHANGED;
443
444 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
445 elems->vht_cap_elem, sta);
446
447 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, elems->he_cap,
448 elems->he_cap_len,
449 elems->he_6ghz_capa,
450 sta);
451
452 if (bw != sta->sta.bandwidth)
453 changed |= IEEE80211_RC_BW_CHANGED;
454
455 /* HT peer is operating 20MHz-only */
456 if (elems->ht_operation &&
457 !(elems->ht_operation->ht_param &
458 IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
459 if (sta->sta.bandwidth != IEEE80211_STA_RX_BW_20)
460 changed |= IEEE80211_RC_BW_CHANGED;
461 sta->sta.bandwidth = IEEE80211_STA_RX_BW_20;
462 }
463
464 if (!test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
465 rate_control_rate_init(sta);
466 else
467 rate_control_rate_update(local, sband, sta, changed);
468out:
469 spin_unlock_bh(&sta->mesh->plink_lock);
470}
471
472static int mesh_allocate_aid(struct ieee80211_sub_if_data *sdata)
473{
474 struct sta_info *sta;
475 unsigned long *aid_map;
476 int aid;
477
478 aid_map = kcalloc(BITS_TO_LONGS(IEEE80211_MAX_AID + 1),
479 sizeof(*aid_map), GFP_KERNEL);
480 if (!aid_map)
481 return -ENOMEM;
482
483 /* reserve aid 0 for mcast indication */
484 __set_bit(0, aid_map);
485
486 rcu_read_lock();
487 list_for_each_entry_rcu(sta, &sdata->local->sta_list, list)
488 __set_bit(sta->sta.aid, aid_map);
489 rcu_read_unlock();
490
491 aid = find_first_zero_bit(aid_map, IEEE80211_MAX_AID + 1);
492 kfree(aid_map);
493
494 if (aid > IEEE80211_MAX_AID)
495 return -ENOBUFS;
496
497 return aid;
498}
499
500static struct sta_info *
501__mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *hw_addr)
502{
503 struct sta_info *sta;
504 int aid;
505
506 if (sdata->local->num_sta >= MESH_MAX_PLINKS)
507 return NULL;
508
509 aid = mesh_allocate_aid(sdata);
510 if (aid < 0)
511 return NULL;
512
513 sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL);
514 if (!sta)
515 return NULL;
516
517 sta->mesh->plink_state = NL80211_PLINK_LISTEN;
518 sta->sta.wme = true;
519 sta->sta.aid = aid;
520
521 sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
522 sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
523 sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
524
525 return sta;
526}
527
528static struct sta_info *
529mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *addr,
530 struct ieee802_11_elems *elems,
531 struct ieee80211_rx_status *rx_status)
532{
533 struct sta_info *sta = NULL;
534
535 /* Userspace handles station allocation */
536 if (sdata->u.mesh.user_mpm ||
537 sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED) {
538 if (mesh_peer_accepts_plinks(elems) &&
539 mesh_plink_availables(sdata)) {
540 int sig = 0;
541
542 if (ieee80211_hw_check(&sdata->local->hw, SIGNAL_DBM))
543 sig = rx_status->signal;
544
545 cfg80211_notify_new_peer_candidate(sdata->dev, addr,
546 elems->ie_start,
547 elems->total_len,
548 sig, GFP_KERNEL);
549 }
550 } else
551 sta = __mesh_sta_info_alloc(sdata, addr);
552
553 return sta;
554}
555
556/*
557 * mesh_sta_info_get - return mesh sta info entry for @addr.
558 *
559 * @sdata: local meshif
560 * @addr: peer's address
561 * @elems: IEs from beacon or mesh peering frame.
562 * @rx_status: rx status for the frame for signal reporting
563 *
564 * Return existing or newly allocated sta_info under RCU read lock.
565 * (re)initialize with given IEs.
566 */
567static struct sta_info *
568mesh_sta_info_get(struct ieee80211_sub_if_data *sdata,
569 u8 *addr, struct ieee802_11_elems *elems,
570 struct ieee80211_rx_status *rx_status) __acquires(RCU)
571{
572 struct sta_info *sta = NULL;
573
574 rcu_read_lock();
575 sta = sta_info_get(sdata, addr);
576 if (sta) {
577 mesh_sta_info_init(sdata, sta, elems);
578 } else {
579 rcu_read_unlock();
580 /* can't run atomic */
581 sta = mesh_sta_info_alloc(sdata, addr, elems, rx_status);
582 if (!sta) {
583 rcu_read_lock();
584 return NULL;
585 }
586
587 mesh_sta_info_init(sdata, sta, elems);
588
589 if (sta_info_insert_rcu(sta))
590 return NULL;
591 }
592
593 return sta;
594}
595
596/*
597 * mesh_neighbour_update - update or initialize new mesh neighbor.
598 *
599 * @sdata: local meshif
600 * @addr: peer's address
601 * @elems: IEs from beacon or mesh peering frame
602 * @rx_status: rx status for the frame for signal reporting
603 *
604 * Initiates peering if appropriate.
605 */
606void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
607 u8 *hw_addr,
608 struct ieee802_11_elems *elems,
609 struct ieee80211_rx_status *rx_status)
610{
611 struct sta_info *sta;
612 u32 changed = 0;
613
614 sta = mesh_sta_info_get(sdata, hw_addr, elems, rx_status);
615 if (!sta)
616 goto out;
617
618 sta->mesh->connected_to_gate = elems->mesh_config->meshconf_form &
619 IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE;
620
621 if (mesh_peer_accepts_plinks(elems) &&
622 sta->mesh->plink_state == NL80211_PLINK_LISTEN &&
623 sdata->u.mesh.accepting_plinks &&
624 sdata->u.mesh.mshcfg.auto_open_plinks &&
625 rssi_threshold_check(sdata, sta))
626 changed = mesh_plink_open(sta);
627
628 ieee80211_mps_frame_release(sta, elems);
629out:
630 rcu_read_unlock();
631 ieee80211_mbss_info_change_notify(sdata, changed);
632}
633
634void mesh_plink_timer(struct timer_list *t)
635{
636 struct mesh_sta *mesh = from_timer(mesh, t, plink_timer);
637 struct sta_info *sta;
638 u16 reason = 0;
639 struct ieee80211_sub_if_data *sdata;
640 struct mesh_config *mshcfg;
641 enum ieee80211_self_protected_actioncode action = 0;
642
643 /*
644 * This STA is valid because sta_info_destroy() will
645 * del_timer_sync() this timer after having made sure
646 * it cannot be readded (by deleting the plink.)
647 */
648 sta = mesh->plink_sta;
649
650 if (sta->sdata->local->quiescing)
651 return;
652
653 spin_lock_bh(&sta->mesh->plink_lock);
654
655 /* If a timer fires just before a state transition on another CPU,
656 * we may have already extended the timeout and changed state by the
657 * time we've acquired the lock and arrived here. In that case,
658 * skip this timer and wait for the new one.
659 */
660 if (time_before(jiffies, sta->mesh->plink_timer.expires)) {
661 mpl_dbg(sta->sdata,
662 "Ignoring timer for %pM in state %s (timer adjusted)",
663 sta->sta.addr, mplstates[sta->mesh->plink_state]);
664 spin_unlock_bh(&sta->mesh->plink_lock);
665 return;
666 }
667
668 /* del_timer() and handler may race when entering these states */
669 if (sta->mesh->plink_state == NL80211_PLINK_LISTEN ||
670 sta->mesh->plink_state == NL80211_PLINK_ESTAB) {
671 mpl_dbg(sta->sdata,
672 "Ignoring timer for %pM in state %s (timer deleted)",
673 sta->sta.addr, mplstates[sta->mesh->plink_state]);
674 spin_unlock_bh(&sta->mesh->plink_lock);
675 return;
676 }
677
678 mpl_dbg(sta->sdata,
679 "Mesh plink timer for %pM fired on state %s\n",
680 sta->sta.addr, mplstates[sta->mesh->plink_state]);
681 sdata = sta->sdata;
682 mshcfg = &sdata->u.mesh.mshcfg;
683
684 switch (sta->mesh->plink_state) {
685 case NL80211_PLINK_OPN_RCVD:
686 case NL80211_PLINK_OPN_SNT:
687 /* retry timer */
688 if (sta->mesh->plink_retries < mshcfg->dot11MeshMaxRetries) {
689 u32 rand;
690 mpl_dbg(sta->sdata,
691 "Mesh plink for %pM (retry, timeout): %d %d\n",
692 sta->sta.addr, sta->mesh->plink_retries,
693 sta->mesh->plink_timeout);
694 get_random_bytes(&rand, sizeof(u32));
695 sta->mesh->plink_timeout = sta->mesh->plink_timeout +
696 rand % sta->mesh->plink_timeout;
697 ++sta->mesh->plink_retries;
698 mod_plink_timer(sta, sta->mesh->plink_timeout);
699 action = WLAN_SP_MESH_PEERING_OPEN;
700 break;
701 }
702 reason = WLAN_REASON_MESH_MAX_RETRIES;
703 fallthrough;
704 case NL80211_PLINK_CNF_RCVD:
705 /* confirm timer */
706 if (!reason)
707 reason = WLAN_REASON_MESH_CONFIRM_TIMEOUT;
708 sta->mesh->plink_state = NL80211_PLINK_HOLDING;
709 mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
710 action = WLAN_SP_MESH_PEERING_CLOSE;
711 break;
712 case NL80211_PLINK_HOLDING:
713 /* holding timer */
714 del_timer(&sta->mesh->plink_timer);
715 mesh_plink_fsm_restart(sta);
716 break;
717 default:
718 break;
719 }
720 spin_unlock_bh(&sta->mesh->plink_lock);
721 if (action)
722 mesh_plink_frame_tx(sdata, sta, action, sta->sta.addr,
723 sta->mesh->llid, sta->mesh->plid, reason);
724}
725
726static inline void mesh_plink_timer_set(struct sta_info *sta, u32 timeout)
727{
728 sta->mesh->plink_timeout = timeout;
729 mod_timer(&sta->mesh->plink_timer, jiffies + msecs_to_jiffies(timeout));
730}
731
732static bool llid_in_use(struct ieee80211_sub_if_data *sdata,
733 u16 llid)
734{
735 struct ieee80211_local *local = sdata->local;
736 bool in_use = false;
737 struct sta_info *sta;
738
739 rcu_read_lock();
740 list_for_each_entry_rcu(sta, &local->sta_list, list) {
741 if (sdata != sta->sdata)
742 continue;
743
744 if (!memcmp(&sta->mesh->llid, &llid, sizeof(llid))) {
745 in_use = true;
746 break;
747 }
748 }
749 rcu_read_unlock();
750
751 return in_use;
752}
753
754static u16 mesh_get_new_llid(struct ieee80211_sub_if_data *sdata)
755{
756 u16 llid;
757
758 do {
759 get_random_bytes(&llid, sizeof(llid));
760 } while (llid_in_use(sdata, llid));
761
762 return llid;
763}
764
765u32 mesh_plink_open(struct sta_info *sta)
766{
767 struct ieee80211_sub_if_data *sdata = sta->sdata;
768 u32 changed;
769
770 if (!test_sta_flag(sta, WLAN_STA_AUTH))
771 return 0;
772
773 spin_lock_bh(&sta->mesh->plink_lock);
774 sta->mesh->llid = mesh_get_new_llid(sdata);
775 if (sta->mesh->plink_state != NL80211_PLINK_LISTEN &&
776 sta->mesh->plink_state != NL80211_PLINK_BLOCKED) {
777 spin_unlock_bh(&sta->mesh->plink_lock);
778 return 0;
779 }
780 sta->mesh->plink_state = NL80211_PLINK_OPN_SNT;
781 mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout);
782 spin_unlock_bh(&sta->mesh->plink_lock);
783 mpl_dbg(sdata,
784 "Mesh plink: starting establishment with %pM\n",
785 sta->sta.addr);
786
787 /* set the non-peer mode to active during peering */
788 changed = ieee80211_mps_local_status_update(sdata);
789
790 mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_OPEN,
791 sta->sta.addr, sta->mesh->llid, 0, 0);
792 return changed;
793}
794
795u32 mesh_plink_block(struct sta_info *sta)
796{
797 u32 changed;
798
799 spin_lock_bh(&sta->mesh->plink_lock);
800 changed = __mesh_plink_deactivate(sta);
801 sta->mesh->plink_state = NL80211_PLINK_BLOCKED;
802 spin_unlock_bh(&sta->mesh->plink_lock);
803 mesh_path_flush_by_nexthop(sta);
804
805 return changed;
806}
807
808static void mesh_plink_close(struct ieee80211_sub_if_data *sdata,
809 struct sta_info *sta,
810 enum plink_event event)
811{
812 struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
813 u16 reason = (event == CLS_ACPT) ?
814 WLAN_REASON_MESH_CLOSE : WLAN_REASON_MESH_CONFIG;
815
816 sta->mesh->reason = reason;
817 sta->mesh->plink_state = NL80211_PLINK_HOLDING;
818 mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
819}
820
821static u32 mesh_plink_establish(struct ieee80211_sub_if_data *sdata,
822 struct sta_info *sta)
823{
824 struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
825 u32 changed = 0;
826
827 del_timer(&sta->mesh->plink_timer);
828 sta->mesh->plink_state = NL80211_PLINK_ESTAB;
829 changed |= mesh_plink_inc_estab_count(sdata);
830 changed |= mesh_set_ht_prot_mode(sdata);
831 changed |= mesh_set_short_slot_time(sdata);
832 mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr);
833 ieee80211_mps_sta_status_update(sta);
834 changed |= ieee80211_mps_set_sta_local_pm(sta, mshcfg->power_mode);
835 return changed;
836}
837
838/**
839 * mesh_plink_fsm - step @sta MPM based on @event
840 *
841 * @sdata: interface
842 * @sta: mesh neighbor
843 * @event: peering event
844 *
845 * Return: changed MBSS flags
846 */
847static u32 mesh_plink_fsm(struct ieee80211_sub_if_data *sdata,
848 struct sta_info *sta, enum plink_event event)
849{
850 struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
851 enum ieee80211_self_protected_actioncode action = 0;
852 u32 changed = 0;
853 bool flush = false;
854
855 mpl_dbg(sdata, "peer %pM in state %s got event %s\n", sta->sta.addr,
856 mplstates[sta->mesh->plink_state], mplevents[event]);
857
858 spin_lock_bh(&sta->mesh->plink_lock);
859 switch (sta->mesh->plink_state) {
860 case NL80211_PLINK_LISTEN:
861 switch (event) {
862 case CLS_ACPT:
863 mesh_plink_fsm_restart(sta);
864 break;
865 case OPN_ACPT:
866 sta->mesh->plink_state = NL80211_PLINK_OPN_RCVD;
867 sta->mesh->llid = mesh_get_new_llid(sdata);
868 mesh_plink_timer_set(sta,
869 mshcfg->dot11MeshRetryTimeout);
870
871 /* set the non-peer mode to active during peering */
872 changed |= ieee80211_mps_local_status_update(sdata);
873 action = WLAN_SP_MESH_PEERING_OPEN;
874 break;
875 default:
876 break;
877 }
878 break;
879 case NL80211_PLINK_OPN_SNT:
880 switch (event) {
881 case OPN_RJCT:
882 case CNF_RJCT:
883 case CLS_ACPT:
884 mesh_plink_close(sdata, sta, event);
885 action = WLAN_SP_MESH_PEERING_CLOSE;
886 break;
887 case OPN_ACPT:
888 /* retry timer is left untouched */
889 sta->mesh->plink_state = NL80211_PLINK_OPN_RCVD;
890 action = WLAN_SP_MESH_PEERING_CONFIRM;
891 break;
892 case CNF_ACPT:
893 sta->mesh->plink_state = NL80211_PLINK_CNF_RCVD;
894 mod_plink_timer(sta, mshcfg->dot11MeshConfirmTimeout);
895 break;
896 default:
897 break;
898 }
899 break;
900 case NL80211_PLINK_OPN_RCVD:
901 switch (event) {
902 case OPN_RJCT:
903 case CNF_RJCT:
904 case CLS_ACPT:
905 mesh_plink_close(sdata, sta, event);
906 action = WLAN_SP_MESH_PEERING_CLOSE;
907 break;
908 case OPN_ACPT:
909 action = WLAN_SP_MESH_PEERING_CONFIRM;
910 break;
911 case CNF_ACPT:
912 changed |= mesh_plink_establish(sdata, sta);
913 break;
914 default:
915 break;
916 }
917 break;
918 case NL80211_PLINK_CNF_RCVD:
919 switch (event) {
920 case OPN_RJCT:
921 case CNF_RJCT:
922 case CLS_ACPT:
923 mesh_plink_close(sdata, sta, event);
924 action = WLAN_SP_MESH_PEERING_CLOSE;
925 break;
926 case OPN_ACPT:
927 changed |= mesh_plink_establish(sdata, sta);
928 action = WLAN_SP_MESH_PEERING_CONFIRM;
929 break;
930 default:
931 break;
932 }
933 break;
934 case NL80211_PLINK_ESTAB:
935 switch (event) {
936 case CLS_ACPT:
937 changed |= __mesh_plink_deactivate(sta);
938 changed |= mesh_set_ht_prot_mode(sdata);
939 changed |= mesh_set_short_slot_time(sdata);
940 mesh_plink_close(sdata, sta, event);
941 action = WLAN_SP_MESH_PEERING_CLOSE;
942 flush = true;
943 break;
944 case OPN_ACPT:
945 action = WLAN_SP_MESH_PEERING_CONFIRM;
946 break;
947 default:
948 break;
949 }
950 break;
951 case NL80211_PLINK_HOLDING:
952 switch (event) {
953 case CLS_ACPT:
954 del_timer(&sta->mesh->plink_timer);
955 mesh_plink_fsm_restart(sta);
956 break;
957 case OPN_ACPT:
958 case CNF_ACPT:
959 case OPN_RJCT:
960 case CNF_RJCT:
961 action = WLAN_SP_MESH_PEERING_CLOSE;
962 break;
963 default:
964 break;
965 }
966 break;
967 default:
968 /* should not get here, PLINK_BLOCKED is dealt with at the
969 * beginning of the function
970 */
971 break;
972 }
973 spin_unlock_bh(&sta->mesh->plink_lock);
974 if (flush)
975 mesh_path_flush_by_nexthop(sta);
976 if (action) {
977 mesh_plink_frame_tx(sdata, sta, action, sta->sta.addr,
978 sta->mesh->llid, sta->mesh->plid,
979 sta->mesh->reason);
980
981 /* also send confirm in open case */
982 if (action == WLAN_SP_MESH_PEERING_OPEN) {
983 mesh_plink_frame_tx(sdata, sta,
984 WLAN_SP_MESH_PEERING_CONFIRM,
985 sta->sta.addr, sta->mesh->llid,
986 sta->mesh->plid, 0);
987 }
988 }
989
990 return changed;
991}
992
993/*
994 * mesh_plink_get_event - get correct MPM event
995 *
996 * @sdata: interface
997 * @sta: peer, leave NULL if processing a frame from a new suitable peer
998 * @elems: peering management IEs
999 * @ftype: frame type
1000 * @llid: peer's peer link ID
1001 * @plid: peer's local link ID
1002 *
1003 * Return: new peering event for @sta, but PLINK_UNDEFINED should be treated as
1004 * an error.
1005 */
1006static enum plink_event
1007mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
1008 struct sta_info *sta,
1009 struct ieee802_11_elems *elems,
1010 enum ieee80211_self_protected_actioncode ftype,
1011 u16 llid, u16 plid)
1012{
1013 enum plink_event event = PLINK_UNDEFINED;
1014 u8 ie_len = elems->peering_len;
1015 bool matches_local;
1016
1017 matches_local = (ftype == WLAN_SP_MESH_PEERING_CLOSE ||
1018 mesh_matches_local(sdata, elems));
1019
1020 /* deny open request from non-matching peer */
1021 if (!matches_local && !sta) {
1022 event = OPN_RJCT;
1023 goto out;
1024 }
1025
1026 if (!sta) {
1027 if (ftype != WLAN_SP_MESH_PEERING_OPEN) {
1028 mpl_dbg(sdata, "Mesh plink: cls or cnf from unknown peer\n");
1029 goto out;
1030 }
1031 /* ftype == WLAN_SP_MESH_PEERING_OPEN */
1032 if (!mesh_plink_free_count(sdata)) {
1033 mpl_dbg(sdata, "Mesh plink error: no more free plinks\n");
1034 goto out;
1035 }
1036
1037 /* new matching peer */
1038 event = OPN_ACPT;
1039 goto out;
1040 } else {
1041 if (!test_sta_flag(sta, WLAN_STA_AUTH)) {
1042 mpl_dbg(sdata, "Mesh plink: Action frame from non-authed peer\n");
1043 goto out;
1044 }
1045 if (sta->mesh->plink_state == NL80211_PLINK_BLOCKED)
1046 goto out;
1047 }
1048
1049 switch (ftype) {
1050 case WLAN_SP_MESH_PEERING_OPEN:
1051 if (!matches_local)
1052 event = OPN_RJCT;
1053 if (!mesh_plink_free_count(sdata) ||
1054 (sta->mesh->plid && sta->mesh->plid != plid))
1055 event = OPN_IGNR;
1056 else
1057 event = OPN_ACPT;
1058 break;
1059 case WLAN_SP_MESH_PEERING_CONFIRM:
1060 if (!matches_local)
1061 event = CNF_RJCT;
1062 if (!mesh_plink_free_count(sdata) ||
1063 sta->mesh->llid != llid ||
1064 (sta->mesh->plid && sta->mesh->plid != plid))
1065 event = CNF_IGNR;
1066 else
1067 event = CNF_ACPT;
1068 break;
1069 case WLAN_SP_MESH_PEERING_CLOSE:
1070 if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
1071 /* Do not check for llid or plid. This does not
1072 * follow the standard but since multiple plinks
1073 * per sta are not supported, it is necessary in
1074 * order to avoid a livelock when MP A sees an
1075 * establish peer link to MP B but MP B does not
1076 * see it. This can be caused by a timeout in
1077 * B's peer link establishment or B beign
1078 * restarted.
1079 */
1080 event = CLS_ACPT;
1081 else if (sta->mesh->plid != plid)
1082 event = CLS_IGNR;
1083 else if (ie_len == 8 && sta->mesh->llid != llid)
1084 event = CLS_IGNR;
1085 else
1086 event = CLS_ACPT;
1087 break;
1088 default:
1089 mpl_dbg(sdata, "Mesh plink: unknown frame subtype\n");
1090 break;
1091 }
1092
1093out:
1094 return event;
1095}
1096
1097static void
1098mesh_process_plink_frame(struct ieee80211_sub_if_data *sdata,
1099 struct ieee80211_mgmt *mgmt,
1100 struct ieee802_11_elems *elems,
1101 struct ieee80211_rx_status *rx_status)
1102{
1103
1104 struct sta_info *sta;
1105 enum plink_event event;
1106 enum ieee80211_self_protected_actioncode ftype;
1107 u32 changed = 0;
1108 u8 ie_len = elems->peering_len;
1109 u16 plid, llid = 0;
1110
1111 if (!elems->peering) {
1112 mpl_dbg(sdata,
1113 "Mesh plink: missing necessary peer link ie\n");
1114 return;
1115 }
1116
1117 if (elems->rsn_len &&
1118 sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
1119 mpl_dbg(sdata,
1120 "Mesh plink: can't establish link with secure peer\n");
1121 return;
1122 }
1123
1124 ftype = mgmt->u.action.u.self_prot.action_code;
1125 if ((ftype == WLAN_SP_MESH_PEERING_OPEN && ie_len != 4) ||
1126 (ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 6) ||
1127 (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 6
1128 && ie_len != 8)) {
1129 mpl_dbg(sdata,
1130 "Mesh plink: incorrect plink ie length %d %d\n",
1131 ftype, ie_len);
1132 return;
1133 }
1134
1135 if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
1136 (!elems->mesh_id || !elems->mesh_config)) {
1137 mpl_dbg(sdata, "Mesh plink: missing necessary ie\n");
1138 return;
1139 }
1140 /* Note the lines below are correct, the llid in the frame is the plid
1141 * from the point of view of this host.
1142 */
1143 plid = get_unaligned_le16(PLINK_GET_LLID(elems->peering));
1144 if (ftype == WLAN_SP_MESH_PEERING_CONFIRM ||
1145 (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len == 8))
1146 llid = get_unaligned_le16(PLINK_GET_PLID(elems->peering));
1147
1148 /* WARNING: Only for sta pointer, is dropped & re-acquired */
1149 rcu_read_lock();
1150
1151 sta = sta_info_get(sdata, mgmt->sa);
1152
1153 if (ftype == WLAN_SP_MESH_PEERING_OPEN &&
1154 !rssi_threshold_check(sdata, sta)) {
1155 mpl_dbg(sdata, "Mesh plink: %pM does not meet rssi threshold\n",
1156 mgmt->sa);
1157 goto unlock_rcu;
1158 }
1159
1160 /* Now we will figure out the appropriate event... */
1161 event = mesh_plink_get_event(sdata, sta, elems, ftype, llid, plid);
1162
1163 if (event == OPN_ACPT) {
1164 rcu_read_unlock();
1165 /* allocate sta entry if necessary and update info */
1166 sta = mesh_sta_info_get(sdata, mgmt->sa, elems, rx_status);
1167 if (!sta) {
1168 mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
1169 goto unlock_rcu;
1170 }
1171 sta->mesh->plid = plid;
1172 } else if (!sta && event == OPN_RJCT) {
1173 mesh_plink_frame_tx(sdata, NULL, WLAN_SP_MESH_PEERING_CLOSE,
1174 mgmt->sa, 0, plid,
1175 WLAN_REASON_MESH_CONFIG);
1176 goto unlock_rcu;
1177 } else if (!sta || event == PLINK_UNDEFINED) {
1178 /* something went wrong */
1179 goto unlock_rcu;
1180 }
1181
1182 if (event == CNF_ACPT) {
1183 /* 802.11-2012 13.3.7.2 - update plid on CNF if not set */
1184 if (!sta->mesh->plid)
1185 sta->mesh->plid = plid;
1186
1187 sta->mesh->aid = get_unaligned_le16(PLINK_CNF_AID(mgmt));
1188 }
1189
1190 changed |= mesh_plink_fsm(sdata, sta, event);
1191
1192unlock_rcu:
1193 rcu_read_unlock();
1194
1195 if (changed)
1196 ieee80211_mbss_info_change_notify(sdata, changed);
1197}
1198
1199void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
1200 struct ieee80211_mgmt *mgmt, size_t len,
1201 struct ieee80211_rx_status *rx_status)
1202{
1203 struct ieee802_11_elems elems;
1204 size_t baselen;
1205 u8 *baseaddr;
1206
1207 /* need action_code, aux */
1208 if (len < IEEE80211_MIN_ACTION_SIZE + 3)
1209 return;
1210
1211 if (sdata->u.mesh.user_mpm)
1212 /* userspace must register for these */
1213 return;
1214
1215 if (is_multicast_ether_addr(mgmt->da)) {
1216 mpl_dbg(sdata,
1217 "Mesh plink: ignore frame from multicast address\n");
1218 return;
1219 }
1220
1221 baseaddr = mgmt->u.action.u.self_prot.variable;
1222 baselen = (u8 *) mgmt->u.action.u.self_prot.variable - (u8 *) mgmt;
1223 if (mgmt->u.action.u.self_prot.action_code ==
1224 WLAN_SP_MESH_PEERING_CONFIRM) {
1225 baseaddr += 4;
1226 baselen += 4;
1227
1228 if (baselen > len)
1229 return;
1230 }
1231 ieee802_11_parse_elems(baseaddr, len - baselen, true, &elems,
1232 mgmt->bssid, NULL);
1233 mesh_process_plink_frame(sdata, mgmt, &elems, rx_status);
1234}
1/*
2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Author: Luis Carlos Cobo <luisca@cozybit.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
9#include <linux/gfp.h>
10#include <linux/kernel.h>
11#include <linux/random.h>
12#include "ieee80211_i.h"
13#include "rate.h"
14#include "mesh.h"
15
16#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
17#define mpl_dbg(fmt, args...) printk(KERN_DEBUG fmt, ##args)
18#else
19#define mpl_dbg(fmt, args...) do { (void)(0); } while (0)
20#endif
21
22#define PLINK_GET_LLID(p) (p + 2)
23#define PLINK_GET_PLID(p) (p + 4)
24
25#define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
26 jiffies + HZ * t / 1000))
27
28#define dot11MeshMaxRetries(s) (s->u.mesh.mshcfg.dot11MeshMaxRetries)
29#define dot11MeshRetryTimeout(s) (s->u.mesh.mshcfg.dot11MeshRetryTimeout)
30#define dot11MeshConfirmTimeout(s) (s->u.mesh.mshcfg.dot11MeshConfirmTimeout)
31#define dot11MeshHoldingTimeout(s) (s->u.mesh.mshcfg.dot11MeshHoldingTimeout)
32#define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
33
34/* We only need a valid sta if user configured a minimum rssi_threshold. */
35#define rssi_threshold_check(sta, sdata) \
36 (sdata->u.mesh.mshcfg.rssi_threshold == 0 ||\
37 (sta && (s8) -ewma_read(&sta->avg_signal) > \
38 sdata->u.mesh.mshcfg.rssi_threshold))
39
40enum plink_event {
41 PLINK_UNDEFINED,
42 OPN_ACPT,
43 OPN_RJCT,
44 OPN_IGNR,
45 CNF_ACPT,
46 CNF_RJCT,
47 CNF_IGNR,
48 CLS_ACPT,
49 CLS_IGNR
50};
51
52static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
53 enum ieee80211_self_protected_actioncode action,
54 u8 *da, __le16 llid, __le16 plid, __le16 reason);
55
56static inline
57void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
58{
59 atomic_inc(&sdata->u.mesh.mshstats.estab_plinks);
60 mesh_accept_plinks_update(sdata);
61}
62
63static inline
64void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
65{
66 atomic_dec(&sdata->u.mesh.mshstats.estab_plinks);
67 mesh_accept_plinks_update(sdata);
68}
69
70/**
71 * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
72 *
73 * @sta: mesh peer link to restart
74 *
75 * Locking: this function must be called holding sta->lock
76 */
77static inline void mesh_plink_fsm_restart(struct sta_info *sta)
78{
79 sta->plink_state = NL80211_PLINK_LISTEN;
80 sta->llid = sta->plid = sta->reason = 0;
81 sta->plink_retries = 0;
82}
83
84/*
85 * Allocate mesh sta entry and insert into station table
86 */
87static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
88 u8 *hw_addr)
89{
90 struct sta_info *sta;
91
92 if (sdata->local->num_sta >= MESH_MAX_PLINKS)
93 return NULL;
94
95 sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL);
96 if (!sta)
97 return NULL;
98
99 sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
100 sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
101 sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
102
103 set_sta_flag(sta, WLAN_STA_WME);
104
105 return sta;
106}
107
108/*
109 * mesh_set_ht_prot_mode - set correct HT protection mode
110 *
111 * Section 9.23.3.5 of IEEE 80211-2012 describes the protection rules for HT
112 * mesh STA in a MBSS. Three HT protection modes are supported for now, non-HT
113 * mixed mode, 20MHz-protection and no-protection mode. non-HT mixed mode is
114 * selected if any non-HT peers are present in our MBSS. 20MHz-protection mode
115 * is selected if all peers in our 20/40MHz MBSS support HT and atleast one
116 * HT20 peer is present. Otherwise no-protection mode is selected.
117 */
118static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
119{
120 struct ieee80211_local *local = sdata->local;
121 struct sta_info *sta;
122 u32 changed = 0;
123 u16 ht_opmode;
124 bool non_ht_sta = false, ht20_sta = false;
125
126 if (local->_oper_channel_type == NL80211_CHAN_NO_HT)
127 return 0;
128
129 rcu_read_lock();
130 list_for_each_entry_rcu(sta, &local->sta_list, list) {
131 if (sdata != sta->sdata ||
132 sta->plink_state != NL80211_PLINK_ESTAB)
133 continue;
134
135 switch (sta->ch_type) {
136 case NL80211_CHAN_NO_HT:
137 mpl_dbg("mesh_plink %pM: nonHT sta (%pM) is present",
138 sdata->vif.addr, sta->sta.addr);
139 non_ht_sta = true;
140 goto out;
141 case NL80211_CHAN_HT20:
142 mpl_dbg("mesh_plink %pM: HT20 sta (%pM) is present",
143 sdata->vif.addr, sta->sta.addr);
144 ht20_sta = true;
145 default:
146 break;
147 }
148 }
149out:
150 rcu_read_unlock();
151
152 if (non_ht_sta)
153 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED;
154 else if (ht20_sta && local->_oper_channel_type > NL80211_CHAN_HT20)
155 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_20MHZ;
156 else
157 ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
158
159 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
160 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
161 sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
162 changed = BSS_CHANGED_HT;
163 mpl_dbg("mesh_plink %pM: protection mode changed to %d",
164 sdata->vif.addr, ht_opmode);
165 }
166
167 return changed;
168}
169
170/**
171 * __mesh_plink_deactivate - deactivate mesh peer link
172 *
173 * @sta: mesh peer link to deactivate
174 *
175 * All mesh paths with this peer as next hop will be flushed
176 *
177 * Locking: the caller must hold sta->lock
178 */
179static bool __mesh_plink_deactivate(struct sta_info *sta)
180{
181 struct ieee80211_sub_if_data *sdata = sta->sdata;
182 bool deactivated = false;
183
184 if (sta->plink_state == NL80211_PLINK_ESTAB) {
185 mesh_plink_dec_estab_count(sdata);
186 deactivated = true;
187 }
188 sta->plink_state = NL80211_PLINK_BLOCKED;
189 mesh_path_flush_by_nexthop(sta);
190
191 return deactivated;
192}
193
194/**
195 * mesh_plink_deactivate - deactivate mesh peer link
196 *
197 * @sta: mesh peer link to deactivate
198 *
199 * All mesh paths with this peer as next hop will be flushed
200 */
201void mesh_plink_deactivate(struct sta_info *sta)
202{
203 struct ieee80211_sub_if_data *sdata = sta->sdata;
204 bool deactivated;
205
206 spin_lock_bh(&sta->lock);
207 deactivated = __mesh_plink_deactivate(sta);
208 sta->reason = cpu_to_le16(WLAN_REASON_MESH_PEER_CANCELED);
209 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
210 sta->sta.addr, sta->llid, sta->plid,
211 sta->reason);
212 spin_unlock_bh(&sta->lock);
213
214 if (deactivated)
215 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
216}
217
218static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
219 enum ieee80211_self_protected_actioncode action,
220 u8 *da, __le16 llid, __le16 plid, __le16 reason) {
221 struct ieee80211_local *local = sdata->local;
222 struct sk_buff *skb;
223 struct ieee80211_mgmt *mgmt;
224 bool include_plid = false;
225 u16 peering_proto = 0;
226 u8 *pos, ie_len = 4;
227 int hdr_len = offsetof(struct ieee80211_mgmt, u.action.u.self_prot) +
228 sizeof(mgmt->u.action.u.self_prot);
229
230 skb = dev_alloc_skb(local->tx_headroom +
231 hdr_len +
232 2 + /* capability info */
233 2 + /* AID */
234 2 + 8 + /* supported rates */
235 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
236 2 + sdata->u.mesh.mesh_id_len +
237 2 + sizeof(struct ieee80211_meshconf_ie) +
238 2 + sizeof(struct ieee80211_ht_cap) +
239 2 + sizeof(struct ieee80211_ht_operation) +
240 2 + 8 + /* peering IE */
241 sdata->u.mesh.ie_len);
242 if (!skb)
243 return -1;
244 skb_reserve(skb, local->tx_headroom);
245 mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len);
246 memset(mgmt, 0, hdr_len);
247 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
248 IEEE80211_STYPE_ACTION);
249 memcpy(mgmt->da, da, ETH_ALEN);
250 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
251 memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
252 mgmt->u.action.category = WLAN_CATEGORY_SELF_PROTECTED;
253 mgmt->u.action.u.self_prot.action_code = action;
254
255 if (action != WLAN_SP_MESH_PEERING_CLOSE) {
256 /* capability info */
257 pos = skb_put(skb, 2);
258 memset(pos, 0, 2);
259 if (action == WLAN_SP_MESH_PEERING_CONFIRM) {
260 /* AID */
261 pos = skb_put(skb, 2);
262 memcpy(pos + 2, &plid, 2);
263 }
264 if (ieee80211_add_srates_ie(&sdata->vif, skb, true) ||
265 ieee80211_add_ext_srates_ie(&sdata->vif, skb, true) ||
266 mesh_add_rsn_ie(skb, sdata) ||
267 mesh_add_meshid_ie(skb, sdata) ||
268 mesh_add_meshconf_ie(skb, sdata))
269 return -1;
270 } else { /* WLAN_SP_MESH_PEERING_CLOSE */
271 if (mesh_add_meshid_ie(skb, sdata))
272 return -1;
273 }
274
275 /* Add Mesh Peering Management element */
276 switch (action) {
277 case WLAN_SP_MESH_PEERING_OPEN:
278 break;
279 case WLAN_SP_MESH_PEERING_CONFIRM:
280 ie_len += 2;
281 include_plid = true;
282 break;
283 case WLAN_SP_MESH_PEERING_CLOSE:
284 if (plid) {
285 ie_len += 2;
286 include_plid = true;
287 }
288 ie_len += 2; /* reason code */
289 break;
290 default:
291 return -EINVAL;
292 }
293
294 if (WARN_ON(skb_tailroom(skb) < 2 + ie_len))
295 return -ENOMEM;
296
297 pos = skb_put(skb, 2 + ie_len);
298 *pos++ = WLAN_EID_PEER_MGMT;
299 *pos++ = ie_len;
300 memcpy(pos, &peering_proto, 2);
301 pos += 2;
302 memcpy(pos, &llid, 2);
303 pos += 2;
304 if (include_plid) {
305 memcpy(pos, &plid, 2);
306 pos += 2;
307 }
308 if (action == WLAN_SP_MESH_PEERING_CLOSE) {
309 memcpy(pos, &reason, 2);
310 pos += 2;
311 }
312
313 if (action != WLAN_SP_MESH_PEERING_CLOSE) {
314 if (mesh_add_ht_cap_ie(skb, sdata) ||
315 mesh_add_ht_oper_ie(skb, sdata))
316 return -1;
317 }
318
319 if (mesh_add_vendor_ies(skb, sdata))
320 return -1;
321
322 ieee80211_tx_skb(sdata, skb);
323 return 0;
324}
325
326/* mesh_peer_init - initialize new mesh peer and return resulting sta_info
327 *
328 * @sdata: local meshif
329 * @addr: peer's address
330 * @elems: IEs from beacon or mesh peering frame
331 *
332 * call under RCU
333 */
334static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
335 u8 *addr,
336 struct ieee802_11_elems *elems)
337{
338 struct ieee80211_local *local = sdata->local;
339 enum ieee80211_band band = local->oper_channel->band;
340 struct ieee80211_supported_band *sband;
341 u32 rates, basic_rates = 0;
342 struct sta_info *sta;
343 bool insert = false;
344
345 sband = local->hw.wiphy->bands[band];
346 rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates);
347
348 sta = sta_info_get(sdata, addr);
349 if (!sta) {
350 /* Userspace handles peer allocation when security is enabled */
351 if (sdata->u.mesh.security & IEEE80211_MESH_SEC_AUTHED) {
352 cfg80211_notify_new_peer_candidate(sdata->dev, addr,
353 elems->ie_start,
354 elems->total_len,
355 GFP_ATOMIC);
356 return NULL;
357 }
358
359 sta = mesh_plink_alloc(sdata, addr);
360 if (!sta)
361 return NULL;
362 insert = true;
363 }
364
365 spin_lock_bh(&sta->lock);
366 sta->last_rx = jiffies;
367 sta->sta.supp_rates[band] = rates;
368 if (elems->ht_cap_elem &&
369 sdata->local->_oper_channel_type != NL80211_CHAN_NO_HT)
370 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
371 elems->ht_cap_elem,
372 &sta->sta.ht_cap);
373 else
374 memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap));
375
376 if (elems->ht_operation) {
377 if (!(elems->ht_operation->ht_param &
378 IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
379 sta->sta.ht_cap.cap &=
380 ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
381 sta->ch_type =
382 ieee80211_ht_oper_to_channel_type(elems->ht_operation);
383 }
384
385 rate_control_rate_init(sta);
386 spin_unlock_bh(&sta->lock);
387
388 if (insert && sta_info_insert(sta))
389 return NULL;
390
391 return sta;
392}
393
394void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
395 u8 *hw_addr,
396 struct ieee802_11_elems *elems)
397{
398 struct sta_info *sta;
399
400 rcu_read_lock();
401 sta = mesh_peer_init(sdata, hw_addr, elems);
402 if (!sta)
403 goto out;
404
405 if (mesh_peer_accepts_plinks(elems) &&
406 sta->plink_state == NL80211_PLINK_LISTEN &&
407 sdata->u.mesh.accepting_plinks &&
408 sdata->u.mesh.mshcfg.auto_open_plinks &&
409 rssi_threshold_check(sta, sdata))
410 mesh_plink_open(sta);
411
412out:
413 rcu_read_unlock();
414}
415
416static void mesh_plink_timer(unsigned long data)
417{
418 struct sta_info *sta;
419 __le16 llid, plid, reason;
420 struct ieee80211_sub_if_data *sdata;
421
422 /*
423 * This STA is valid because sta_info_destroy() will
424 * del_timer_sync() this timer after having made sure
425 * it cannot be readded (by deleting the plink.)
426 */
427 sta = (struct sta_info *) data;
428
429 if (sta->sdata->local->quiescing) {
430 sta->plink_timer_was_running = true;
431 return;
432 }
433
434 spin_lock_bh(&sta->lock);
435 if (sta->ignore_plink_timer) {
436 sta->ignore_plink_timer = false;
437 spin_unlock_bh(&sta->lock);
438 return;
439 }
440 mpl_dbg("Mesh plink timer for %pM fired on state %d\n",
441 sta->sta.addr, sta->plink_state);
442 reason = 0;
443 llid = sta->llid;
444 plid = sta->plid;
445 sdata = sta->sdata;
446
447 switch (sta->plink_state) {
448 case NL80211_PLINK_OPN_RCVD:
449 case NL80211_PLINK_OPN_SNT:
450 /* retry timer */
451 if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
452 u32 rand;
453 mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n",
454 sta->sta.addr, sta->plink_retries,
455 sta->plink_timeout);
456 get_random_bytes(&rand, sizeof(u32));
457 sta->plink_timeout = sta->plink_timeout +
458 rand % sta->plink_timeout;
459 ++sta->plink_retries;
460 mod_plink_timer(sta, sta->plink_timeout);
461 spin_unlock_bh(&sta->lock);
462 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
463 sta->sta.addr, llid, 0, 0);
464 break;
465 }
466 reason = cpu_to_le16(WLAN_REASON_MESH_MAX_RETRIES);
467 /* fall through on else */
468 case NL80211_PLINK_CNF_RCVD:
469 /* confirm timer */
470 if (!reason)
471 reason = cpu_to_le16(WLAN_REASON_MESH_CONFIRM_TIMEOUT);
472 sta->plink_state = NL80211_PLINK_HOLDING;
473 mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
474 spin_unlock_bh(&sta->lock);
475 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
476 sta->sta.addr, llid, plid, reason);
477 break;
478 case NL80211_PLINK_HOLDING:
479 /* holding timer */
480 del_timer(&sta->plink_timer);
481 mesh_plink_fsm_restart(sta);
482 spin_unlock_bh(&sta->lock);
483 break;
484 default:
485 spin_unlock_bh(&sta->lock);
486 break;
487 }
488}
489
490#ifdef CONFIG_PM
491void mesh_plink_quiesce(struct sta_info *sta)
492{
493 if (del_timer_sync(&sta->plink_timer))
494 sta->plink_timer_was_running = true;
495}
496
497void mesh_plink_restart(struct sta_info *sta)
498{
499 if (sta->plink_timer_was_running) {
500 add_timer(&sta->plink_timer);
501 sta->plink_timer_was_running = false;
502 }
503}
504#endif
505
506static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
507{
508 sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
509 sta->plink_timer.data = (unsigned long) sta;
510 sta->plink_timer.function = mesh_plink_timer;
511 sta->plink_timeout = timeout;
512 add_timer(&sta->plink_timer);
513}
514
515int mesh_plink_open(struct sta_info *sta)
516{
517 __le16 llid;
518 struct ieee80211_sub_if_data *sdata = sta->sdata;
519
520 if (!test_sta_flag(sta, WLAN_STA_AUTH))
521 return -EPERM;
522
523 spin_lock_bh(&sta->lock);
524 get_random_bytes(&llid, 2);
525 sta->llid = llid;
526 if (sta->plink_state != NL80211_PLINK_LISTEN) {
527 spin_unlock_bh(&sta->lock);
528 return -EBUSY;
529 }
530 sta->plink_state = NL80211_PLINK_OPN_SNT;
531 mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
532 spin_unlock_bh(&sta->lock);
533 mpl_dbg("Mesh plink: starting establishment with %pM\n",
534 sta->sta.addr);
535
536 return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
537 sta->sta.addr, llid, 0, 0);
538}
539
540void mesh_plink_block(struct sta_info *sta)
541{
542 struct ieee80211_sub_if_data *sdata = sta->sdata;
543 bool deactivated;
544
545 spin_lock_bh(&sta->lock);
546 deactivated = __mesh_plink_deactivate(sta);
547 sta->plink_state = NL80211_PLINK_BLOCKED;
548 spin_unlock_bh(&sta->lock);
549
550 if (deactivated)
551 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
552}
553
554
555void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt,
556 size_t len, struct ieee80211_rx_status *rx_status)
557{
558 struct ieee802_11_elems elems;
559 struct sta_info *sta;
560 enum plink_event event;
561 enum ieee80211_self_protected_actioncode ftype;
562 size_t baselen;
563 bool matches_local = true;
564 u8 ie_len;
565 u8 *baseaddr;
566 u32 changed = 0;
567 __le16 plid, llid, reason;
568#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
569 static const char *mplstates[] = {
570 [NL80211_PLINK_LISTEN] = "LISTEN",
571 [NL80211_PLINK_OPN_SNT] = "OPN-SNT",
572 [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD",
573 [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD",
574 [NL80211_PLINK_ESTAB] = "ESTAB",
575 [NL80211_PLINK_HOLDING] = "HOLDING",
576 [NL80211_PLINK_BLOCKED] = "BLOCKED"
577 };
578#endif
579
580 /* need action_code, aux */
581 if (len < IEEE80211_MIN_ACTION_SIZE + 3)
582 return;
583
584 if (is_multicast_ether_addr(mgmt->da)) {
585 mpl_dbg("Mesh plink: ignore frame from multicast address");
586 return;
587 }
588
589 baseaddr = mgmt->u.action.u.self_prot.variable;
590 baselen = (u8 *) mgmt->u.action.u.self_prot.variable - (u8 *) mgmt;
591 if (mgmt->u.action.u.self_prot.action_code ==
592 WLAN_SP_MESH_PEERING_CONFIRM) {
593 baseaddr += 4;
594 baselen += 4;
595 }
596 ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
597 if (!elems.peering) {
598 mpl_dbg("Mesh plink: missing necessary peer link ie\n");
599 return;
600 }
601 if (elems.rsn_len &&
602 sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
603 mpl_dbg("Mesh plink: can't establish link with secure peer\n");
604 return;
605 }
606
607 ftype = mgmt->u.action.u.self_prot.action_code;
608 ie_len = elems.peering_len;
609 if ((ftype == WLAN_SP_MESH_PEERING_OPEN && ie_len != 4) ||
610 (ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 6) ||
611 (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 6
612 && ie_len != 8)) {
613 mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
614 ftype, ie_len);
615 return;
616 }
617
618 if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
619 (!elems.mesh_id || !elems.mesh_config)) {
620 mpl_dbg("Mesh plink: missing necessary ie\n");
621 return;
622 }
623 /* Note the lines below are correct, the llid in the frame is the plid
624 * from the point of view of this host.
625 */
626 memcpy(&plid, PLINK_GET_LLID(elems.peering), 2);
627 if (ftype == WLAN_SP_MESH_PEERING_CONFIRM ||
628 (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len == 8))
629 memcpy(&llid, PLINK_GET_PLID(elems.peering), 2);
630
631 rcu_read_lock();
632
633 sta = sta_info_get(sdata, mgmt->sa);
634 if (!sta && ftype != WLAN_SP_MESH_PEERING_OPEN) {
635 mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
636 rcu_read_unlock();
637 return;
638 }
639
640 if (ftype == WLAN_SP_MESH_PEERING_OPEN &&
641 !rssi_threshold_check(sta, sdata)) {
642 mpl_dbg("Mesh plink: %pM does not meet rssi threshold\n",
643 mgmt->sa);
644 rcu_read_unlock();
645 return;
646 }
647
648 if (sta && !test_sta_flag(sta, WLAN_STA_AUTH)) {
649 mpl_dbg("Mesh plink: Action frame from non-authed peer\n");
650 rcu_read_unlock();
651 return;
652 }
653
654 if (sta && sta->plink_state == NL80211_PLINK_BLOCKED) {
655 rcu_read_unlock();
656 return;
657 }
658
659 /* Now we will figure out the appropriate event... */
660 event = PLINK_UNDEFINED;
661 if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
662 !mesh_matches_local(sdata, &elems)) {
663 matches_local = false;
664 switch (ftype) {
665 case WLAN_SP_MESH_PEERING_OPEN:
666 event = OPN_RJCT;
667 break;
668 case WLAN_SP_MESH_PEERING_CONFIRM:
669 event = CNF_RJCT;
670 break;
671 default:
672 break;
673 }
674 }
675
676 if (!sta && !matches_local) {
677 rcu_read_unlock();
678 reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
679 llid = 0;
680 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
681 mgmt->sa, llid, plid, reason);
682 return;
683 } else if (!sta) {
684 /* ftype == WLAN_SP_MESH_PEERING_OPEN */
685 if (!mesh_plink_free_count(sdata)) {
686 mpl_dbg("Mesh plink error: no more free plinks\n");
687 rcu_read_unlock();
688 return;
689 }
690 event = OPN_ACPT;
691 } else if (matches_local) {
692 switch (ftype) {
693 case WLAN_SP_MESH_PEERING_OPEN:
694 if (!mesh_plink_free_count(sdata) ||
695 (sta->plid && sta->plid != plid))
696 event = OPN_IGNR;
697 else
698 event = OPN_ACPT;
699 break;
700 case WLAN_SP_MESH_PEERING_CONFIRM:
701 if (!mesh_plink_free_count(sdata) ||
702 (sta->llid != llid || sta->plid != plid))
703 event = CNF_IGNR;
704 else
705 event = CNF_ACPT;
706 break;
707 case WLAN_SP_MESH_PEERING_CLOSE:
708 if (sta->plink_state == NL80211_PLINK_ESTAB)
709 /* Do not check for llid or plid. This does not
710 * follow the standard but since multiple plinks
711 * per sta are not supported, it is necessary in
712 * order to avoid a livelock when MP A sees an
713 * establish peer link to MP B but MP B does not
714 * see it. This can be caused by a timeout in
715 * B's peer link establishment or B beign
716 * restarted.
717 */
718 event = CLS_ACPT;
719 else if (sta->plid != plid)
720 event = CLS_IGNR;
721 else if (ie_len == 7 && sta->llid != llid)
722 event = CLS_IGNR;
723 else
724 event = CLS_ACPT;
725 break;
726 default:
727 mpl_dbg("Mesh plink: unknown frame subtype\n");
728 rcu_read_unlock();
729 return;
730 }
731 }
732
733 if (event == OPN_ACPT) {
734 /* allocate sta entry if necessary and update info */
735 sta = mesh_peer_init(sdata, mgmt->sa, &elems);
736 if (!sta) {
737 mpl_dbg("Mesh plink: failed to init peer!\n");
738 rcu_read_unlock();
739 return;
740 }
741 }
742
743 mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
744 mgmt->sa, mplstates[sta->plink_state],
745 le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
746 event);
747 reason = 0;
748 spin_lock_bh(&sta->lock);
749 switch (sta->plink_state) {
750 /* spin_unlock as soon as state is updated at each case */
751 case NL80211_PLINK_LISTEN:
752 switch (event) {
753 case CLS_ACPT:
754 mesh_plink_fsm_restart(sta);
755 spin_unlock_bh(&sta->lock);
756 break;
757 case OPN_ACPT:
758 sta->plink_state = NL80211_PLINK_OPN_RCVD;
759 sta->plid = plid;
760 get_random_bytes(&llid, 2);
761 sta->llid = llid;
762 mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
763 spin_unlock_bh(&sta->lock);
764 mesh_plink_frame_tx(sdata,
765 WLAN_SP_MESH_PEERING_OPEN,
766 sta->sta.addr, llid, 0, 0);
767 mesh_plink_frame_tx(sdata,
768 WLAN_SP_MESH_PEERING_CONFIRM,
769 sta->sta.addr, llid, plid, 0);
770 break;
771 default:
772 spin_unlock_bh(&sta->lock);
773 break;
774 }
775 break;
776
777 case NL80211_PLINK_OPN_SNT:
778 switch (event) {
779 case OPN_RJCT:
780 case CNF_RJCT:
781 reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
782 case CLS_ACPT:
783 if (!reason)
784 reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
785 sta->reason = reason;
786 sta->plink_state = NL80211_PLINK_HOLDING;
787 if (!mod_plink_timer(sta,
788 dot11MeshHoldingTimeout(sdata)))
789 sta->ignore_plink_timer = true;
790
791 llid = sta->llid;
792 spin_unlock_bh(&sta->lock);
793 mesh_plink_frame_tx(sdata,
794 WLAN_SP_MESH_PEERING_CLOSE,
795 sta->sta.addr, llid, plid, reason);
796 break;
797 case OPN_ACPT:
798 /* retry timer is left untouched */
799 sta->plink_state = NL80211_PLINK_OPN_RCVD;
800 sta->plid = plid;
801 llid = sta->llid;
802 spin_unlock_bh(&sta->lock);
803 mesh_plink_frame_tx(sdata,
804 WLAN_SP_MESH_PEERING_CONFIRM,
805 sta->sta.addr, llid, plid, 0);
806 break;
807 case CNF_ACPT:
808 sta->plink_state = NL80211_PLINK_CNF_RCVD;
809 if (!mod_plink_timer(sta,
810 dot11MeshConfirmTimeout(sdata)))
811 sta->ignore_plink_timer = true;
812
813 spin_unlock_bh(&sta->lock);
814 break;
815 default:
816 spin_unlock_bh(&sta->lock);
817 break;
818 }
819 break;
820
821 case NL80211_PLINK_OPN_RCVD:
822 switch (event) {
823 case OPN_RJCT:
824 case CNF_RJCT:
825 reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
826 case CLS_ACPT:
827 if (!reason)
828 reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
829 sta->reason = reason;
830 sta->plink_state = NL80211_PLINK_HOLDING;
831 if (!mod_plink_timer(sta,
832 dot11MeshHoldingTimeout(sdata)))
833 sta->ignore_plink_timer = true;
834
835 llid = sta->llid;
836 spin_unlock_bh(&sta->lock);
837 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
838 sta->sta.addr, llid, plid, reason);
839 break;
840 case OPN_ACPT:
841 llid = sta->llid;
842 spin_unlock_bh(&sta->lock);
843 mesh_plink_frame_tx(sdata,
844 WLAN_SP_MESH_PEERING_CONFIRM,
845 sta->sta.addr, llid, plid, 0);
846 break;
847 case CNF_ACPT:
848 del_timer(&sta->plink_timer);
849 sta->plink_state = NL80211_PLINK_ESTAB;
850 spin_unlock_bh(&sta->lock);
851 mesh_plink_inc_estab_count(sdata);
852 changed |= mesh_set_ht_prot_mode(sdata);
853 changed |= BSS_CHANGED_BEACON;
854 mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
855 sta->sta.addr);
856 break;
857 default:
858 spin_unlock_bh(&sta->lock);
859 break;
860 }
861 break;
862
863 case NL80211_PLINK_CNF_RCVD:
864 switch (event) {
865 case OPN_RJCT:
866 case CNF_RJCT:
867 reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
868 case CLS_ACPT:
869 if (!reason)
870 reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
871 sta->reason = reason;
872 sta->plink_state = NL80211_PLINK_HOLDING;
873 if (!mod_plink_timer(sta,
874 dot11MeshHoldingTimeout(sdata)))
875 sta->ignore_plink_timer = true;
876
877 llid = sta->llid;
878 spin_unlock_bh(&sta->lock);
879 mesh_plink_frame_tx(sdata,
880 WLAN_SP_MESH_PEERING_CLOSE,
881 sta->sta.addr, llid, plid, reason);
882 break;
883 case OPN_ACPT:
884 del_timer(&sta->plink_timer);
885 sta->plink_state = NL80211_PLINK_ESTAB;
886 spin_unlock_bh(&sta->lock);
887 mesh_plink_inc_estab_count(sdata);
888 changed |= mesh_set_ht_prot_mode(sdata);
889 changed |= BSS_CHANGED_BEACON;
890 mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
891 sta->sta.addr);
892 mesh_plink_frame_tx(sdata,
893 WLAN_SP_MESH_PEERING_CONFIRM,
894 sta->sta.addr, llid, plid, 0);
895 break;
896 default:
897 spin_unlock_bh(&sta->lock);
898 break;
899 }
900 break;
901
902 case NL80211_PLINK_ESTAB:
903 switch (event) {
904 case CLS_ACPT:
905 reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
906 sta->reason = reason;
907 __mesh_plink_deactivate(sta);
908 sta->plink_state = NL80211_PLINK_HOLDING;
909 llid = sta->llid;
910 mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
911 spin_unlock_bh(&sta->lock);
912 changed |= mesh_set_ht_prot_mode(sdata);
913 changed |= BSS_CHANGED_BEACON;
914 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
915 sta->sta.addr, llid, plid, reason);
916 break;
917 case OPN_ACPT:
918 llid = sta->llid;
919 spin_unlock_bh(&sta->lock);
920 mesh_plink_frame_tx(sdata,
921 WLAN_SP_MESH_PEERING_CONFIRM,
922 sta->sta.addr, llid, plid, 0);
923 break;
924 default:
925 spin_unlock_bh(&sta->lock);
926 break;
927 }
928 break;
929 case NL80211_PLINK_HOLDING:
930 switch (event) {
931 case CLS_ACPT:
932 if (del_timer(&sta->plink_timer))
933 sta->ignore_plink_timer = 1;
934 mesh_plink_fsm_restart(sta);
935 spin_unlock_bh(&sta->lock);
936 break;
937 case OPN_ACPT:
938 case CNF_ACPT:
939 case OPN_RJCT:
940 case CNF_RJCT:
941 llid = sta->llid;
942 reason = sta->reason;
943 spin_unlock_bh(&sta->lock);
944 mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
945 sta->sta.addr, llid, plid, reason);
946 break;
947 default:
948 spin_unlock_bh(&sta->lock);
949 }
950 break;
951 default:
952 /* should not get here, PLINK_BLOCKED is dealt with at the
953 * beginning of the function
954 */
955 spin_unlock_bh(&sta->lock);
956 break;
957 }
958
959 rcu_read_unlock();
960
961 if (changed)
962 ieee80211_bss_info_change_notify(sdata, changed);
963}