Linux Audio

Check our new training course

Loading...
v5.14.15
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
  4 *
  5 * Copyright 2007 Freescale Semiconductor Inc.
 
 
 
 
 
  6 */
  7
  8/dts-v1/;
  9/ {
 10	model = "EP8248E";
 11	compatible = "fsl,ep8248e";
 12	#address-cells = <1>;
 13	#size-cells = <1>;
 14
 15	aliases {
 16		planetcore-SMC1 = &smc1;
 17		planetcore-SCC1 = &scc1;
 18		ethernet0 = &eth0;
 19		ethernet1 = &eth1;
 20		serial0 = &smc1;
 21		serial1 = &scc1;
 22	};
 23
 24	cpus {
 25		#address-cells = <1>;
 26		#size-cells = <0>;
 27
 28		PowerPC,8248@0 {
 29			device_type = "cpu";
 30			reg = <0>;
 31			d-cache-line-size = <32>;
 32			i-cache-line-size = <32>;
 33			d-cache-size = <16384>;
 34			i-cache-size = <16384>;
 35			timebase-frequency = <0>;
 36			clock-frequency = <0>;
 37		};
 38	};
 39
 40	localbus@f0010100 {
 41		compatible = "fsl,mpc8248-localbus",
 42		             "fsl,pq2-localbus",
 43		             "simple-bus";
 44		#address-cells = <2>;
 45		#size-cells = <1>;
 46		reg = <0xf0010100 0x40>;
 47
 48		ranges = <0 0 0xfc000000 0x04000000
 49		          1 0 0xfa000000 0x00008000>;
 50
 51		flash@0,3800000 {
 52			compatible = "cfi-flash";
 53			reg = <0 0x3800000 0x800000>;
 54			bank-width = <4>;
 55			device-width = <2>;
 56		};
 57
 58		bcsr@1,0 {
 59			#address-cells = <2>;
 60			#size-cells = <1>;
 61			reg = <1 0 0x10>;
 62			compatible = "fsl,ep8248e-bcsr";
 63			ranges;
 64
 65			mdio {
 
 66				compatible = "fsl,ep8248e-mdio-bitbang";
 67				#address-cells = <1>;
 68				#size-cells = <0>;
 69				reg = <1 8 1>;
 70
 71				PHY0: ethernet-phy@0 {
 72					interrupt-parent = <&PIC>;
 73					reg = <0>;
 
 74				};
 75
 76				PHY1: ethernet-phy@1 {
 77					interrupt-parent = <&PIC>;
 78					reg = <1>;
 
 79				};
 80			};
 81		};
 82	};
 83
 84	memory {
 85		device_type = "memory";
 86		reg = <0 0>;
 87	};
 88
 89	soc@f0000000 {
 90		#address-cells = <1>;
 91		#size-cells = <1>;
 92		compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
 93		ranges = <0x00000000 0xf0000000 0x00053000>;
 94
 95		// Temporary until code stops depending on it.
 96		device_type = "soc";
 97
 98		// Temporary -- will go away once kernel uses ranges for get_immrbase().
 99		reg = <0xf0000000 0x00053000>;
100
101		cpm@119c0 {
102			#address-cells = <1>;
103			#size-cells = <1>;
104			#interrupt-cells = <2>;
105			compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
106			             "simple-bus";
107			reg = <0x119c0 0x30>;
108			ranges;
109
110			muram {
111				#address-cells = <1>;
112				#size-cells = <1>;
113				ranges = <0 0 0x10000>;
114
115				data@0 {
116					compatible = "fsl,cpm-muram-data";
117					reg = <0 0x2000 0x9800 0x800>;
118				};
119			};
120
121			brg@119f0 {
122				compatible = "fsl,mpc8248-brg",
123				             "fsl,cpm2-brg",
124				             "fsl,cpm-brg";
125				reg = <0x119f0 0x10 0x115f0 0x10>;
126			};
127
128			/* Monitor port/SMC1 */
129			smc1: serial@11a80 {
130				device_type = "serial";
131				compatible = "fsl,mpc8248-smc-uart",
132				             "fsl,cpm2-smc-uart";
133				reg = <0x11a80 0x20 0x87fc 2>;
134				interrupts = <4 8>;
135				interrupt-parent = <&PIC>;
136				fsl,cpm-brg = <7>;
137				fsl,cpm-command = <0x1d000000>;
138				linux,planetcore-label = "SMC1";
139			};
140
141			/* "Serial" port/SCC1 */
142			scc1: serial@11a00 {
143				device_type = "serial";
144				compatible = "fsl,mpc8248-scc-uart",
145				             "fsl,cpm2-scc-uart";
146				reg = <0x11a00 0x20 0x8000 0x100>;
147				interrupts = <40 8>;
148				interrupt-parent = <&PIC>;
149				fsl,cpm-brg = <1>;
150				fsl,cpm-command = <0x00800000>;
151				linux,planetcore-label = "SCC1";
152			};
153
154			eth0: ethernet@11300 {
155				device_type = "network";
156				compatible = "fsl,mpc8248-fcc-enet",
157				             "fsl,cpm2-fcc-enet";
158				reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
159				local-mac-address = [ 00 00 00 00 00 00 ];
160				interrupts = <32 8>;
161				interrupt-parent = <&PIC>;
162				phy-handle = <&PHY0>;
163				linux,network-index = <0>;
164				fsl,cpm-command = <0x12000300>;
165			};
166
167			eth1: ethernet@11320 {
168				device_type = "network";
169				compatible = "fsl,mpc8248-fcc-enet",
170				             "fsl,cpm2-fcc-enet";
171				reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
172				local-mac-address = [ 00 00 00 00 00 00 ];
173				interrupts = <33 8>;
174				interrupt-parent = <&PIC>;
175				phy-handle = <&PHY1>;
176				linux,network-index = <1>;
177				fsl,cpm-command = <0x16200300>;
178			};
179
180			usb@11b60 {
181				#address-cells = <1>;
182				#size-cells = <0>;
183				compatible = "fsl,mpc8248-usb",
184				             "fsl,cpm2-usb";
185				reg = <0x11b60 0x18 0x8b00 0x100>;
186				interrupt-parent = <&PIC>;
187				interrupts = <11 8>;
188				fsl,cpm-command = <0x2e600000>;
189			};
190		};
191
192		PIC: interrupt-controller@10c00 {
193			#interrupt-cells = <2>;
194			interrupt-controller;
195			reg = <0x10c00 0x80>;
196			compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
197		};
198	};
199};
v3.5.6
 
  1/*
  2 * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
  3 *
  4 * Copyright 2007 Freescale Semiconductor Inc.
  5 *
  6 * This program is free software; you can redistribute  it and/or modify it
  7 * under  the terms of  the GNU General  Public License as published by the
  8 * Free Software Foundation;  either version 2 of the  License, or (at your
  9 * option) any later version.
 10 */
 11
 12/dts-v1/;
 13/ {
 14	model = "EP8248E";
 15	compatible = "fsl,ep8248e";
 16	#address-cells = <1>;
 17	#size-cells = <1>;
 18
 19	aliases {
 20		planetcore-SMC1 = &smc1;
 21		planetcore-SCC1 = &scc1;
 22		ethernet0 = &eth0;
 23		ethernet1 = &eth1;
 24		serial0 = &smc1;
 25		serial1 = &scc1;
 26	};
 27
 28	cpus {
 29		#address-cells = <1>;
 30		#size-cells = <0>;
 31
 32		PowerPC,8248@0 {
 33			device_type = "cpu";
 34			reg = <0>;
 35			d-cache-line-size = <32>;
 36			i-cache-line-size = <32>;
 37			d-cache-size = <16384>;
 38			i-cache-size = <16384>;
 39			timebase-frequency = <0>;
 40			clock-frequency = <0>;
 41		};
 42	};
 43
 44	localbus@f0010100 {
 45		compatible = "fsl,mpc8248-localbus",
 46		             "fsl,pq2-localbus",
 47		             "simple-bus";
 48		#address-cells = <2>;
 49		#size-cells = <1>;
 50		reg = <0xf0010100 0x40>;
 51
 52		ranges = <0 0 0xfc000000 0x04000000
 53		          1 0 0xfa000000 0x00008000>;
 54
 55		flash@0,3800000 {
 56			compatible = "cfi-flash";
 57			reg = <0 0x3800000 0x800000>;
 58			bank-width = <4>;
 59			device-width = <2>;
 60		};
 61
 62		bcsr@1,0 {
 63			#address-cells = <2>;
 64			#size-cells = <1>;
 65			reg = <1 0 0x10>;
 66			compatible = "fsl,ep8248e-bcsr";
 67			ranges;
 68
 69			mdio {
 70				device_type = "mdio";
 71				compatible = "fsl,ep8248e-mdio-bitbang";
 72				#address-cells = <1>;
 73				#size-cells = <0>;
 74				reg = <1 8 1>;
 75
 76				PHY0: ethernet-phy@0 {
 77					interrupt-parent = <&PIC>;
 78					reg = <0>;
 79					device_type = "ethernet-phy";
 80				};
 81
 82				PHY1: ethernet-phy@1 {
 83					interrupt-parent = <&PIC>;
 84					reg = <1>;
 85					device_type = "ethernet-phy";
 86				};
 87			};
 88		};
 89	};
 90
 91	memory {
 92		device_type = "memory";
 93		reg = <0 0>;
 94	};
 95
 96	soc@f0000000 {
 97		#address-cells = <1>;
 98		#size-cells = <1>;
 99		compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
100		ranges = <0x00000000 0xf0000000 0x00053000>;
101
102		// Temporary until code stops depending on it.
103		device_type = "soc";
104
105		// Temporary -- will go away once kernel uses ranges for get_immrbase().
106		reg = <0xf0000000 0x00053000>;
107
108		cpm@119c0 {
109			#address-cells = <1>;
110			#size-cells = <1>;
111			#interrupt-cells = <2>;
112			compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
113			             "simple-bus";
114			reg = <0x119c0 0x30>;
115			ranges;
116
117			muram {
118				#address-cells = <1>;
119				#size-cells = <1>;
120				ranges = <0 0 0x10000>;
121
122				data@0 {
123					compatible = "fsl,cpm-muram-data";
124					reg = <0 0x2000 0x9800 0x800>;
125				};
126			};
127
128			brg@119f0 {
129				compatible = "fsl,mpc8248-brg",
130				             "fsl,cpm2-brg",
131				             "fsl,cpm-brg";
132				reg = <0x119f0 0x10 0x115f0 0x10>;
133			};
134
135			/* Monitor port/SMC1 */
136			smc1: serial@11a80 {
137				device_type = "serial";
138				compatible = "fsl,mpc8248-smc-uart",
139				             "fsl,cpm2-smc-uart";
140				reg = <0x11a80 0x20 0x87fc 2>;
141				interrupts = <4 8>;
142				interrupt-parent = <&PIC>;
143				fsl,cpm-brg = <7>;
144				fsl,cpm-command = <0x1d000000>;
145				linux,planetcore-label = "SMC1";
146			};
147
148			/* "Serial" port/SCC1 */
149			scc1: serial@11a00 {
150				device_type = "serial";
151				compatible = "fsl,mpc8248-scc-uart",
152				             "fsl,cpm2-scc-uart";
153				reg = <0x11a00 0x20 0x8000 0x100>;
154				interrupts = <40 8>;
155				interrupt-parent = <&PIC>;
156				fsl,cpm-brg = <1>;
157				fsl,cpm-command = <0x00800000>;
158				linux,planetcore-label = "SCC1";
159			};
160
161			eth0: ethernet@11300 {
162				device_type = "network";
163				compatible = "fsl,mpc8248-fcc-enet",
164				             "fsl,cpm2-fcc-enet";
165				reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
166				local-mac-address = [ 00 00 00 00 00 00 ];
167				interrupts = <32 8>;
168				interrupt-parent = <&PIC>;
169				phy-handle = <&PHY0>;
170				linux,network-index = <0>;
171				fsl,cpm-command = <0x12000300>;
172			};
173
174			eth1: ethernet@11320 {
175				device_type = "network";
176				compatible = "fsl,mpc8248-fcc-enet",
177				             "fsl,cpm2-fcc-enet";
178				reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
179				local-mac-address = [ 00 00 00 00 00 00 ];
180				interrupts = <33 8>;
181				interrupt-parent = <&PIC>;
182				phy-handle = <&PHY1>;
183				linux,network-index = <1>;
184				fsl,cpm-command = <0x16200300>;
185			};
186
187			usb@11b60 {
188				#address-cells = <1>;
189				#size-cells = <0>;
190				compatible = "fsl,mpc8248-usb",
191				             "fsl,cpm2-usb";
192				reg = <0x11b60 0x18 0x8b00 0x100>;
193				interrupt-parent = <&PIC>;
194				interrupts = <11 8>;
195				fsl,cpm-command = <0x2e600000>;
196			};
197		};
198
199		PIC: interrupt-controller@10c00 {
200			#interrupt-cells = <2>;
201			interrupt-controller;
202			reg = <0x10c00 0x80>;
203			compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
204		};
205	};
206};