Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/input.h>
8#include "rk3066a.dtsi"
9
10/ {
11 model = "Rayeager PX2";
12 compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
13
14 aliases {
15 mmc0 = &mmc0;
16 mmc1 = &mmc1;
17 mmc2 = &emmc;
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x40000000>;
23 };
24
25 ir: ir-receiver {
26 compatible = "gpio-ir-receiver";
27 gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
28 pinctrl-names = "default";
29 pinctrl-0 = <&ir_int>;
30 };
31
32 keys: gpio-keys {
33 compatible = "gpio-keys";
34
35 power {
36 wakeup-source;
37 gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
38 label = "GPIO Power";
39 linux,code = <KEY_POWER>;
40 pinctrl-names = "default";
41 pinctrl-0 = <&pwr_key>;
42 };
43 };
44
45 vdd_log: vdd-log {
46 compatible = "pwm-regulator";
47 pwms = <&pwm3 0 1000>;
48 regulator-name = "vdd_log";
49 regulator-min-microvolt = <1200000>;
50 regulator-max-microvolt = <1200000>;
51 regulator-always-on;
52 voltage-table = <1000000 100>,
53 <1200000 42>;
54 status = "okay";
55 };
56
57 vsys: vsys-regulator {
58 compatible = "regulator-fixed";
59 regulator-name = "vsys";
60 regulator-min-microvolt = <5000000>;
61 regulator-max-microvolt = <5000000>;
62 regulator-always-on;
63 regulator-boot-on;
64 };
65
66 /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
67 vcc_stdby: stdby-regulator {
68 compatible = "regulator-fixed";
69 regulator-name = "5v_stdby";
70 regulator-min-microvolt = <5000000>;
71 regulator-max-microvolt = <5000000>;
72 regulator-always-on;
73 regulator-boot-on;
74 };
75
76 vcc_emmc: emmc-regulator {
77 compatible = "regulator-fixed";
78 regulator-name = "emmc_vccq";
79 regulator-min-microvolt = <3000000>;
80 regulator-max-microvolt = <3000000>;
81 vin-supply = <&vsys>;
82 };
83
84 vcc_sata: sata-regulator {
85 compatible = "regulator-fixed";
86 enable-active-high;
87 gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&sata_pwr>;
90 regulator-name = "usb_5v";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
93 regulator-always-on;
94 vin-supply = <&vcc_stdby>;
95 };
96
97 vcc_sd: sdmmc-regulator {
98 compatible = "regulator-fixed";
99 gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&sdmmc_pwr>;
102 regulator-name = "vcc_sd";
103 regulator-min-microvolt = <3300000>;
104 regulator-max-microvolt = <3300000>;
105 startup-delay-us = <100000>;
106 vin-supply = <&vcc_io>;
107 };
108
109 vcc_host: usb-host-regulator {
110 compatible = "regulator-fixed";
111 enable-active-high;
112 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&host_drv>;
115 regulator-name = "host-pwr";
116 regulator-min-microvolt = <5000000>;
117 regulator-max-microvolt = <5000000>;
118 regulator-always-on;
119 vin-supply = <&vcc_stdby>;
120 };
121
122 vcc_otg: usb-otg-regulator {
123 compatible = "regulator-fixed";
124 enable-active-high;
125 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&otg_drv>;
128 regulator-name = "vcc_otg";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
131 regulator-always-on;
132 vin-supply = <&vcc_stdby>;
133 };
134};
135
136&cpu0 {
137 cpu-supply = <&vdd_arm>;
138};
139
140&cpu1 {
141 cpu-supply = <&vdd_arm>;
142};
143
144&emac {
145 pinctrl-names = "default";
146 pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
147 phy = <&phy0>;
148 phy-supply = <&vcc_rmii>;
149 status = "okay";
150
151 phy0: ethernet-phy@0 {
152 reg = <0>;
153 reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
154 };
155};
156
157&emmc {
158 bus-width = <8>;
159 cap-mmc-highspeed;
160 non-removable;
161 pinctrl-names = "default";
162 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
163 vmmc-supply = <&vcc_emmc>;
164 vqmmc-supply = <&vcc_emmc>;
165 status = "okay";
166};
167
168&i2c0 {
169 clock-frequency = <400000>;
170 status = "okay";
171
172 ak8963: ak8963@d {
173 compatible = "asahi-kasei,ak8975";
174 reg = <0x0d>;
175 interrupt-parent = <&gpio4>;
176 interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&comp_int>;
179 };
180
181 mma8452: mma8452@1d {
182 compatible = "fsl,mma8452";
183 reg = <0x1d>;
184 interrupt-parent = <&gpio4>;
185 interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&gsensor_int>;
188 };
189};
190
191&i2c1 {
192 clock-frequency = <400000>;
193 status = "okay";
194
195 tps: tps@2d {
196 reg = <0x2d>;
197 interrupt-parent = <&gpio6>;
198 interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pmic_int>, <&pwr_hold>;
201
202 vcc1-supply = <&vsys>;
203 vcc2-supply = <&vsys>;
204 vcc3-supply = <&vsys>;
205 vcc4-supply = <&vsys>;
206 vcc5-supply = <&vcc_io>;
207 vcc6-supply = <&vcc_io>;
208 vcc7-supply = <&vsys>;
209 vccio-supply = <&vsys>;
210
211 regulators {
212 vcc_rtc: regulator@0 {
213 regulator-name = "vcc_rtc";
214 regulator-always-on;
215 };
216
217 vcc_io: regulator@1 {
218 regulator-name = "vcc_io";
219 regulator-min-microvolt = <3300000>;
220 regulator-max-microvolt = <3300000>;
221 regulator-always-on;
222 };
223
224 vdd_arm: regulator@2 {
225 regulator-name = "vdd_arm";
226 regulator-min-microvolt = <600000>;
227 regulator-max-microvolt = <1500000>;
228 regulator-always-on;
229 regulator-boot-on;
230 };
231
232 vcc_ddr: regulator@3 {
233 regulator-name = "vcc_ddr";
234 regulator-min-microvolt = <600000>;
235 regulator-max-microvolt = <1500000>;
236 regulator-always-on;
237 regulator-boot-on;
238 };
239
240 vcc18: regulator@5 {
241 regulator-name = "vcc18";
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1800000>;
244 regulator-always-on;
245 };
246
247 vdd_11: regulator@6 {
248 regulator-name = "vdd_11";
249 regulator-min-microvolt = <1100000>;
250 regulator-max-microvolt = <1100000>;
251 regulator-always-on;
252 };
253
254 vcc_25: regulator@7 {
255 regulator-name = "vcc_25";
256 regulator-min-microvolt = <2500000>;
257 regulator-max-microvolt = <2500000>;
258 regulator-always-on;
259 };
260
261 vccio_wl: regulator@8 {
262 regulator-name = "vccio_wl";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 };
266
267 vcc25_hdmi: regulator@9 {
268 regulator-name = "vcc25_hdmi";
269 regulator-min-microvolt = <2500000>;
270 regulator-max-microvolt = <2500000>;
271 };
272
273 vcca_33: regulator@10 {
274 regulator-name = "vcca_33";
275 regulator-min-microvolt = <3300000>;
276 regulator-max-microvolt = <3300000>;
277 };
278
279 vcc_rmii: regulator@11 {
280 regulator-name = "vcc_rmii";
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3300000>;
283 };
284
285 vcc28_cif: regulator@12 {
286 regulator-name = "vcc28_cif";
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
289 };
290 };
291 };
292};
293
294#include "tps65910.dtsi"
295
296&i2c2 {
297 status = "okay";
298};
299
300&i2c3 {
301 status = "okay";
302};
303
304&i2c4 {
305 status = "okay";
306};
307
308&mmc0 {
309 bus-width = <4>;
310 disable-wp;
311 pinctrl-names = "default";
312 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
313 vmmc-supply = <&vcc_sd>;
314 cap-mmc-highspeed;
315 cap-sd-highspeed;
316 status = "okay";
317};
318
319&mmc1 {
320 bus-width = <4>;
321 non-removable;
322 pinctrl-names = "default";
323 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
324 vmmc-supply = <&vccio_wl>;
325 status = "okay";
326};
327
328&pinctrl {
329 pcfg_output_high: pcfg-output-high {
330 output-high;
331 };
332
333 ak8963 {
334 comp_int: comp-int {
335 rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
336 };
337 };
338
339 emac {
340 rmii_rst: rmii-rst {
341 rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
342 };
343 };
344
345 ir {
346 ir_int: ir-int {
347 rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
348 };
349 };
350
351 keys {
352 pwr_key: pwr-key {
353 rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
354 };
355 };
356
357 mma8452 {
358 gsensor_int: gsensor-int {
359 rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
360 };
361 };
362
363 mmc {
364 sdmmc_pwr: sdmmc-pwr {
365 rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
366 };
367 };
368
369 usb_host {
370 host_drv: host-drv {
371 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
372 };
373
374 hub_rst: hub-rst {
375 rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
376 };
377
378 sata_pwr: sata-pwr {
379 rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
380 };
381
382 sata_reset: sata-reset {
383 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
384 };
385 };
386
387 usb_otg {
388 otg_drv: otg-drv {
389 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
390 };
391 };
392
393 tps {
394 pmic_int: pmic-int {
395 rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
396 };
397
398 pwr_hold: pwr-hold {
399 rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
400 };
401 };
402};
403
404&pwm1 {
405 status = "okay";
406};
407
408&pwm2 {
409 status = "okay";
410};
411
412&pwm3 {
413 status = "okay";
414};
415
416&saradc {
417 vref-supply = <&vcc_25>;
418 status = "okay";
419};
420
421&spi0 {
422 status = "okay";
423};
424
425&uart0 {
426 pinctrl-names = "default";
427 pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
428 status = "okay";
429};
430
431&uart2 {
432 status = "okay";
433};
434
435&uart3 {
436 pinctrl-names = "default";
437 pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
438 status = "okay";
439};
440
441&usb_host {
442 pinctrl-names = "default";
443 pinctrl-0 = <&hub_rst>, <&sata_reset>;
444 status = "okay";
445};
446
447&usbphy {
448 status = "okay";
449};
450
451&usb_otg {
452 status = "okay";
453};
454
455&wdt {
456 status = "okay";
457};