Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef SCSI_TRANSPORT_SAS_H
3#define SCSI_TRANSPORT_SAS_H
4
5#include <linux/transport_class.h>
6#include <linux/types.h>
7#include <linux/mutex.h>
8#include <scsi/sas.h>
9#include <linux/bsg-lib.h>
10
11struct scsi_transport_template;
12struct sas_rphy;
13struct request;
14
15#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
16static inline int scsi_is_sas_rphy(const struct device *sdev)
17{
18 return 0;
19}
20#else
21extern int scsi_is_sas_rphy(const struct device *);
22#endif
23
24static inline int sas_protocol_ata(enum sas_protocol proto)
25{
26 return ((proto & SAS_PROTOCOL_SATA) ||
27 (proto & SAS_PROTOCOL_STP))? 1 : 0;
28}
29
30enum sas_linkrate {
31 /* These Values are defined in the SAS standard */
32 SAS_LINK_RATE_UNKNOWN = 0,
33 SAS_PHY_DISABLED = 1,
34 SAS_PHY_RESET_PROBLEM = 2,
35 SAS_SATA_SPINUP_HOLD = 3,
36 SAS_SATA_PORT_SELECTOR = 4,
37 SAS_PHY_RESET_IN_PROGRESS = 5,
38 SAS_LINK_RATE_1_5_GBPS = 8,
39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 SAS_LINK_RATE_3_0_GBPS = 9,
41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 SAS_LINK_RATE_6_0_GBPS = 10,
43 SAS_LINK_RATE_12_0_GBPS = 11,
44 /* These are virtual to the transport class and may never
45 * be signalled normally since the standard defined field
46 * is only 4 bits */
47 SAS_LINK_RATE_FAILED = 0x10,
48 SAS_PHY_VIRTUAL = 0x11,
49};
50
51struct sas_identify {
52 enum sas_device_type device_type;
53 enum sas_protocol initiator_port_protocols;
54 enum sas_protocol target_port_protocols;
55 u64 sas_address;
56 u8 phy_identifier;
57};
58
59struct sas_phy {
60 struct device dev;
61 int number;
62 int enabled;
63
64 /* phy identification */
65 struct sas_identify identify;
66
67 /* phy attributes */
68 enum sas_linkrate negotiated_linkrate;
69 enum sas_linkrate minimum_linkrate_hw;
70 enum sas_linkrate minimum_linkrate;
71 enum sas_linkrate maximum_linkrate_hw;
72 enum sas_linkrate maximum_linkrate;
73
74 /* link error statistics */
75 u32 invalid_dword_count;
76 u32 running_disparity_error_count;
77 u32 loss_of_dword_sync_count;
78 u32 phy_reset_problem_count;
79
80 /* for the list of phys belonging to a port */
81 struct list_head port_siblings;
82
83 /* available to the lldd */
84 void *hostdata;
85};
86
87#define dev_to_phy(d) \
88 container_of((d), struct sas_phy, dev)
89#define transport_class_to_phy(dev) \
90 dev_to_phy((dev)->parent)
91#define phy_to_shost(phy) \
92 dev_to_shost((phy)->dev.parent)
93
94struct request_queue;
95struct sas_rphy {
96 struct device dev;
97 struct sas_identify identify;
98 struct list_head list;
99 struct request_queue *q;
100 u32 scsi_target_id;
101};
102
103#define dev_to_rphy(d) \
104 container_of((d), struct sas_rphy, dev)
105#define transport_class_to_rphy(dev) \
106 dev_to_rphy((dev)->parent)
107#define rphy_to_shost(rphy) \
108 dev_to_shost((rphy)->dev.parent)
109#define target_to_rphy(targ) \
110 dev_to_rphy((targ)->dev.parent)
111
112struct sas_end_device {
113 struct sas_rphy rphy;
114 /* flags */
115 unsigned ready_led_meaning:1;
116 unsigned tlr_supported:1;
117 unsigned tlr_enabled:1;
118 /* parameters */
119 u16 I_T_nexus_loss_timeout;
120 u16 initiator_response_timeout;
121};
122#define rphy_to_end_device(r) \
123 container_of((r), struct sas_end_device, rphy)
124
125struct sas_expander_device {
126 int level;
127 int next_port_id;
128
129 #define SAS_EXPANDER_VENDOR_ID_LEN 8
130 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
131 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
132 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
133 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
134 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
135 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
136 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
137 u16 component_id;
138 u8 component_revision_id;
139
140 struct sas_rphy rphy;
141
142};
143#define rphy_to_expander_device(r) \
144 container_of((r), struct sas_expander_device, rphy)
145
146struct sas_port {
147 struct device dev;
148
149 int port_identifier;
150 int num_phys;
151 /* port flags */
152 unsigned int is_backlink:1;
153
154 /* the other end of the link */
155 struct sas_rphy *rphy;
156
157 struct mutex phy_list_mutex;
158 struct list_head phy_list;
159 struct list_head del_list; /* libsas only */
160};
161
162#define dev_to_sas_port(d) \
163 container_of((d), struct sas_port, dev)
164#define transport_class_to_sas_port(dev) \
165 dev_to_sas_port((dev)->parent)
166
167struct sas_phy_linkrates {
168 enum sas_linkrate maximum_linkrate;
169 enum sas_linkrate minimum_linkrate;
170};
171
172/* The functions by which the transport class and the driver communicate */
173struct sas_function_template {
174 int (*get_linkerrors)(struct sas_phy *);
175 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
176 int (*get_bay_identifier)(struct sas_rphy *);
177 int (*phy_reset)(struct sas_phy *, int);
178 int (*phy_enable)(struct sas_phy *, int);
179 int (*phy_setup)(struct sas_phy *);
180 void (*phy_release)(struct sas_phy *);
181 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
182 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
183 struct sas_rphy *);
184};
185
186
187void sas_remove_children(struct device *);
188extern void sas_remove_host(struct Scsi_Host *);
189
190extern struct sas_phy *sas_phy_alloc(struct device *, int);
191extern void sas_phy_free(struct sas_phy *);
192extern int sas_phy_add(struct sas_phy *);
193extern void sas_phy_delete(struct sas_phy *);
194extern int scsi_is_sas_phy(const struct device *);
195
196u64 sas_get_address(struct scsi_device *);
197unsigned int sas_tlr_supported(struct scsi_device *);
198unsigned int sas_is_tlr_enabled(struct scsi_device *);
199void sas_disable_tlr(struct scsi_device *);
200void sas_enable_tlr(struct scsi_device *);
201
202extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
203extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
204void sas_rphy_free(struct sas_rphy *);
205extern int sas_rphy_add(struct sas_rphy *);
206extern void sas_rphy_remove(struct sas_rphy *);
207extern void sas_rphy_delete(struct sas_rphy *);
208extern void sas_rphy_unlink(struct sas_rphy *);
209
210struct sas_port *sas_port_alloc(struct device *, int);
211struct sas_port *sas_port_alloc_num(struct device *);
212int sas_port_add(struct sas_port *);
213void sas_port_free(struct sas_port *);
214void sas_port_delete(struct sas_port *);
215void sas_port_add_phy(struct sas_port *, struct sas_phy *);
216void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
217void sas_port_mark_backlink(struct sas_port *);
218int scsi_is_sas_port(const struct device *);
219struct sas_phy *sas_port_get_phy(struct sas_port *port);
220static inline void sas_port_put_phy(struct sas_phy *phy)
221{
222 if (phy)
223 put_device(&phy->dev);
224}
225
226extern struct scsi_transport_template *
227sas_attach_transport(struct sas_function_template *);
228extern void sas_release_transport(struct scsi_transport_template *);
229int sas_read_port_mode_page(struct scsi_device *);
230
231static inline int
232scsi_is_sas_expander_device(struct device *dev)
233{
234 struct sas_rphy *rphy;
235 if (!scsi_is_sas_rphy(dev))
236 return 0;
237 rphy = dev_to_rphy(dev);
238 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
239 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
240}
241
242#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
243
244#endif /* SCSI_TRANSPORT_SAS_H */
1#ifndef SCSI_TRANSPORT_SAS_H
2#define SCSI_TRANSPORT_SAS_H
3
4#include <linux/transport_class.h>
5#include <linux/types.h>
6#include <linux/mutex.h>
7#include <scsi/sas.h>
8
9struct scsi_transport_template;
10struct sas_rphy;
11struct request;
12
13static inline int sas_protocol_ata(enum sas_protocol proto)
14{
15 return ((proto & SAS_PROTOCOL_SATA) ||
16 (proto & SAS_PROTOCOL_STP))? 1 : 0;
17}
18
19enum sas_linkrate {
20 /* These Values are defined in the SAS standard */
21 SAS_LINK_RATE_UNKNOWN = 0,
22 SAS_PHY_DISABLED = 1,
23 SAS_PHY_RESET_PROBLEM = 2,
24 SAS_SATA_SPINUP_HOLD = 3,
25 SAS_SATA_PORT_SELECTOR = 4,
26 SAS_PHY_RESET_IN_PROGRESS = 5,
27 SAS_LINK_RATE_1_5_GBPS = 8,
28 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
29 SAS_LINK_RATE_3_0_GBPS = 9,
30 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
31 SAS_LINK_RATE_6_0_GBPS = 10,
32 SAS_LINK_RATE_12_0_GBPS = 11,
33 /* These are virtual to the transport class and may never
34 * be signalled normally since the standard defined field
35 * is only 4 bits */
36 SAS_LINK_RATE_FAILED = 0x10,
37 SAS_PHY_VIRTUAL = 0x11,
38};
39
40struct sas_identify {
41 enum sas_device_type device_type;
42 enum sas_protocol initiator_port_protocols;
43 enum sas_protocol target_port_protocols;
44 u64 sas_address;
45 u8 phy_identifier;
46};
47
48struct sas_phy {
49 struct device dev;
50 int number;
51 int enabled;
52
53 /* phy identification */
54 struct sas_identify identify;
55
56 /* phy attributes */
57 enum sas_linkrate negotiated_linkrate;
58 enum sas_linkrate minimum_linkrate_hw;
59 enum sas_linkrate minimum_linkrate;
60 enum sas_linkrate maximum_linkrate_hw;
61 enum sas_linkrate maximum_linkrate;
62
63 /* link error statistics */
64 u32 invalid_dword_count;
65 u32 running_disparity_error_count;
66 u32 loss_of_dword_sync_count;
67 u32 phy_reset_problem_count;
68
69 /* for the list of phys belonging to a port */
70 struct list_head port_siblings;
71
72 /* available to the lldd */
73 void *hostdata;
74};
75
76#define dev_to_phy(d) \
77 container_of((d), struct sas_phy, dev)
78#define transport_class_to_phy(dev) \
79 dev_to_phy((dev)->parent)
80#define phy_to_shost(phy) \
81 dev_to_shost((phy)->dev.parent)
82
83struct request_queue;
84struct sas_rphy {
85 struct device dev;
86 struct sas_identify identify;
87 struct list_head list;
88 struct request_queue *q;
89 u32 scsi_target_id;
90};
91
92#define dev_to_rphy(d) \
93 container_of((d), struct sas_rphy, dev)
94#define transport_class_to_rphy(dev) \
95 dev_to_rphy((dev)->parent)
96#define rphy_to_shost(rphy) \
97 dev_to_shost((rphy)->dev.parent)
98#define target_to_rphy(targ) \
99 dev_to_rphy((targ)->dev.parent)
100
101struct sas_end_device {
102 struct sas_rphy rphy;
103 /* flags */
104 unsigned ready_led_meaning:1;
105 unsigned tlr_supported:1;
106 unsigned tlr_enabled:1;
107 /* parameters */
108 u16 I_T_nexus_loss_timeout;
109 u16 initiator_response_timeout;
110};
111#define rphy_to_end_device(r) \
112 container_of((r), struct sas_end_device, rphy)
113
114struct sas_expander_device {
115 int level;
116 int next_port_id;
117
118 #define SAS_EXPANDER_VENDOR_ID_LEN 8
119 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
120 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
121 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
122 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
123 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
124 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
125 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
126 u16 component_id;
127 u8 component_revision_id;
128
129 struct sas_rphy rphy;
130
131};
132#define rphy_to_expander_device(r) \
133 container_of((r), struct sas_expander_device, rphy)
134
135struct sas_port {
136 struct device dev;
137
138 int port_identifier;
139 int num_phys;
140 /* port flags */
141 unsigned int is_backlink:1;
142
143 /* the other end of the link */
144 struct sas_rphy *rphy;
145
146 struct mutex phy_list_mutex;
147 struct list_head phy_list;
148};
149
150#define dev_to_sas_port(d) \
151 container_of((d), struct sas_port, dev)
152#define transport_class_to_sas_port(dev) \
153 dev_to_sas_port((dev)->parent)
154
155struct sas_phy_linkrates {
156 enum sas_linkrate maximum_linkrate;
157 enum sas_linkrate minimum_linkrate;
158};
159
160/* The functions by which the transport class and the driver communicate */
161struct sas_function_template {
162 int (*get_linkerrors)(struct sas_phy *);
163 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
164 int (*get_bay_identifier)(struct sas_rphy *);
165 int (*phy_reset)(struct sas_phy *, int);
166 int (*phy_enable)(struct sas_phy *, int);
167 int (*phy_setup)(struct sas_phy *);
168 void (*phy_release)(struct sas_phy *);
169 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
170 int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
171};
172
173
174void sas_remove_children(struct device *);
175extern void sas_remove_host(struct Scsi_Host *);
176
177extern struct sas_phy *sas_phy_alloc(struct device *, int);
178extern void sas_phy_free(struct sas_phy *);
179extern int sas_phy_add(struct sas_phy *);
180extern void sas_phy_delete(struct sas_phy *);
181extern int scsi_is_sas_phy(const struct device *);
182
183unsigned int sas_tlr_supported(struct scsi_device *);
184unsigned int sas_is_tlr_enabled(struct scsi_device *);
185void sas_disable_tlr(struct scsi_device *);
186void sas_enable_tlr(struct scsi_device *);
187
188extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
189extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
190void sas_rphy_free(struct sas_rphy *);
191extern int sas_rphy_add(struct sas_rphy *);
192extern void sas_rphy_remove(struct sas_rphy *);
193extern void sas_rphy_delete(struct sas_rphy *);
194extern void sas_rphy_unlink(struct sas_rphy *);
195extern int scsi_is_sas_rphy(const struct device *);
196
197struct sas_port *sas_port_alloc(struct device *, int);
198struct sas_port *sas_port_alloc_num(struct device *);
199int sas_port_add(struct sas_port *);
200void sas_port_free(struct sas_port *);
201void sas_port_delete(struct sas_port *);
202void sas_port_add_phy(struct sas_port *, struct sas_phy *);
203void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
204void sas_port_mark_backlink(struct sas_port *);
205int scsi_is_sas_port(const struct device *);
206struct sas_phy *sas_port_get_phy(struct sas_port *port);
207static inline void sas_port_put_phy(struct sas_phy *phy)
208{
209 if (phy)
210 put_device(&phy->dev);
211}
212
213extern struct scsi_transport_template *
214sas_attach_transport(struct sas_function_template *);
215extern void sas_release_transport(struct scsi_transport_template *);
216int sas_read_port_mode_page(struct scsi_device *);
217
218static inline int
219scsi_is_sas_expander_device(struct device *dev)
220{
221 struct sas_rphy *rphy;
222 if (!scsi_is_sas_rphy(dev))
223 return 0;
224 rphy = dev_to_rphy(dev);
225 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
226 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
227}
228
229#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
230
231#endif /* SCSI_TRANSPORT_SAS_H */