1/*
  2 * P4080DS Device Tree Source
  3 *
  4 * Copyright 2009-2011 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35/include/ "fsl/p4080si-pre.dtsi"
 36
 37/ {
 38	model = "fsl,P4080DS";
 39	compatible = "fsl,P4080DS";
 40	#address-cells = <2>;
 41	#size-cells = <2>;
 42	interrupt-parent = <&mpic>;
 43
 44	memory {
 45		device_type = "memory";
 46	};
 47
 48	dcsr: dcsr@f00000000 {
 49		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
 50	};
 51
 52	soc: soc@ffe000000 {
 53		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 54		reg = <0xf 0xfe000000 0 0x00001000>;
 55
 56		spi@110000 {
 57			flash@0 {
 58				#address-cells = <1>;
 59				#size-cells = <1>;
 60				compatible = "spansion,s25sl12801";
 61				reg = <0>;
 62				spi-max-frequency = <40000000>; /* input clock */
 63				partition@u-boot {
 64					label = "u-boot";
 65					reg = <0x00000000 0x00100000>;
 66					read-only;
 67				};
 68				partition@kernel {
 69					label = "kernel";
 70					reg = <0x00100000 0x00500000>;
 71					read-only;
 72				};
 73				partition@dtb {
 74					label = "dtb";
 75					reg = <0x00600000 0x00100000>;
 76					read-only;
 77				};
 78				partition@fs {
 79					label = "file system";
 80					reg = <0x00700000 0x00900000>;
 81				};
 82			};
 83		};
 84
 85		i2c@118100 {
 86			eeprom@51 {
 87				compatible = "at24,24c256";
 88				reg = <0x51>;
 89			};
 90			eeprom@52 {
 91				compatible = "at24,24c256";
 92				reg = <0x52>;
 93			};
 94			rtc@68 {
 95				compatible = "dallas,ds3232";
 96				reg = <0x68>;
 97				interrupts = <0x1 0x1 0 0>;
 98			};
 99			adt7461@4c {
100				compatible = "adi,adt7461";
101				reg = <0x4c>;
102			};
103		};
104
105		usb0: usb@210000 {
106			phy_type = "ulpi";
107		};
108
109		usb1: usb@211000 {
110			dr_mode = "host";
111			phy_type = "ulpi";
112		};
113	};
114
115	rio: rapidio@ffe0c0000 {
116		reg = <0xf 0xfe0c0000 0 0x11000>;
117
118		port1 {
119			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
120		};
121		port2 {
122			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
123		};
124	};
125
126	lbc: localbus@ffe124000 {
127		reg = <0xf 0xfe124000 0 0x1000>;
128		ranges = <0 0 0xf 0xe8000000 0x08000000
129			  3 0 0xf 0xffdf0000 0x00008000>;
130
131		flash@0,0 {
132			compatible = "cfi-flash";
133			reg = <0 0 0x08000000>;
134			bank-width = <2>;
135			device-width = <2>;
136		};
137
138		board-control@3,0 {
139			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
140			reg = <3 0 0x30>;
141		};
142	};
143
144	pci0: pcie@ffe200000 {
145		reg = <0xf 0xfe200000 0 0x1000>;
146		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
147			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
148		pcie@0 {
149			ranges = <0x02000000 0 0xe0000000
150				  0x02000000 0 0xe0000000
151				  0 0x20000000
152
153				  0x01000000 0 0x00000000
154				  0x01000000 0 0x00000000
155				  0 0x00010000>;
156		};
157	};
158
159	pci1: pcie@ffe201000 {
160		reg = <0xf 0xfe201000 0 0x1000>;
161		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
162			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
163		pcie@0 {
164			ranges = <0x02000000 0 0xe0000000
165				  0x02000000 0 0xe0000000
166				  0 0x20000000
167
168				  0x01000000 0 0x00000000
169				  0x01000000 0 0x00000000
170				  0 0x00010000>;
171		};
172	};
173
174	pci2: pcie@ffe202000 {
175		reg = <0xf 0xfe202000 0 0x1000>;
176		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
177			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
178		pcie@0 {
179			ranges = <0x02000000 0 0xe0000000
180				  0x02000000 0 0xe0000000
181				  0 0x20000000
182
183				  0x01000000 0 0x00000000
184				  0x01000000 0 0x00000000
185				  0 0x00010000>;
186		};
187	};
188
189};
190
191/include/ "fsl/p4080si-post.dtsi"