1#include <linux/types.h>
  2#include <linux/init.h>
  3#include <linux/kernel_stat.h>
  4#include <linux/sched.h>
  5#include <linux/spinlock.h>
  6#include <linux/interrupt.h>
  7#include <linux/mc146818rtc.h>
  8#include <linux/smp.h>
  9#include <linux/timex.h>
 10
 11#include <asm/hardirq.h>
 12#include <asm/div64.h>
 13#include <asm/cpu.h>
 14#include <asm/time.h>
 15#include <asm/irq.h>
 16#include <asm/mc146818-time.h>
 17#include <asm/msc01_ic.h>
 18
 19#include <asm/mips-boards/generic.h>
 20#include <asm/mips-boards/prom.h>
 21#include <asm/mips-boards/simint.h>
 22
 23
 24unsigned long cpu_khz;
 25
 26/*
 27 * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
 28 */
 29static unsigned int __init estimate_cpu_frequency(void)
 30{
 31	unsigned int prid = read_c0_prid() & 0xffff00;
 32	unsigned int count;
 33
 34#if 1
 35	/*
 36	 * hardwire the board frequency to 12MHz.
 37	 */
 38
 39	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
 40	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
 41		count = 12000000;
 42	else
 43		count =  6000000;
 44#else
 45	unsigned int flags;
 46
 47	local_irq_save(flags);
 48
 49	/* Start counter exactly on falling edge of update flag */
 50	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 51	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 52
 53	/* Start r4k counter. */
 54	write_c0_count(0);
 55
 56	/* Read counter exactly on falling edge of update flag */
 57	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 58	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 59
 60	count = read_c0_count();
 61
 62	/* restore interrupts */
 63	local_irq_restore(flags);
 64#endif
 65
 66	mips_hpt_frequency = count;
 67
 68	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
 69	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
 70		count *= 2;
 71
 72	count += 5000;    /* round */
 73	count -= count%10000;
 74
 75	return count;
 76}
 77
 78static int mips_cpu_timer_irq;
 79
 80static void mips_timer_dispatch(void)
 81{
 82	do_IRQ(mips_cpu_timer_irq);
 83}
 84
 85
 86unsigned __cpuinit get_c0_compare_int(void)
 87{
 88#ifdef MSC01E_INT_BASE
 89	if (cpu_has_veic) {
 90		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
 91		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
 92
 93		return mips_cpu_timer_irq;
 94	}
 95#endif
 96	if (cpu_has_vint)
 97		set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
 98	mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 99
100	return mips_cpu_timer_irq;
101}
102
103void __init plat_time_init(void)
104{
105	unsigned int est_freq;
106
107	/* Set Data mode - binary. */
108	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
109
110	est_freq = estimate_cpu_frequency();
111
112	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
113	       (est_freq % 1000000) * 100 / 1000000);
114
115	cpu_khz = est_freq / 1000;
116}