Loading...
1/*
2 * sleep.c - ACPI sleep support.
3 *
4 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6 * Copyright (c) 2000-2003 Patrick Mochel
7 * Copyright (c) 2003 Open Source Development Lab
8 *
9 * This file is released under the GPLv2.
10 *
11 */
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/interrupt.h>
18#include <linux/suspend.h>
19#include <linux/reboot.h>
20#include <linux/acpi.h>
21#include <linux/module.h>
22#include <linux/syscore_ops.h>
23#include <asm/io.h>
24#include <trace/events/power.h>
25
26#include "internal.h"
27#include "sleep.h"
28
29static u8 sleep_states[ACPI_S_STATE_COUNT];
30
31static void acpi_sleep_tts_switch(u32 acpi_state)
32{
33 acpi_status status;
34
35 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
36 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
37 /*
38 * OS can't evaluate the _TTS object correctly. Some warning
39 * message will be printed. But it won't break anything.
40 */
41 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
42 }
43}
44
45static int tts_notify_reboot(struct notifier_block *this,
46 unsigned long code, void *x)
47{
48 acpi_sleep_tts_switch(ACPI_STATE_S5);
49 return NOTIFY_DONE;
50}
51
52static struct notifier_block tts_notifier = {
53 .notifier_call = tts_notify_reboot,
54 .next = NULL,
55 .priority = 0,
56};
57
58static int acpi_sleep_prepare(u32 acpi_state)
59{
60#ifdef CONFIG_ACPI_SLEEP
61 /* do we have a wakeup address for S2 and S3? */
62 if (acpi_state == ACPI_STATE_S3) {
63 if (!acpi_wakeup_address)
64 return -EFAULT;
65 acpi_set_waking_vector(acpi_wakeup_address);
66
67 }
68 ACPI_FLUSH_CPU_CACHE();
69#endif
70 printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
71 acpi_state);
72 acpi_enable_wakeup_devices(acpi_state);
73 acpi_enter_sleep_state_prep(acpi_state);
74 return 0;
75}
76
77static bool acpi_sleep_state_supported(u8 sleep_state)
78{
79 acpi_status status;
80 u8 type_a, type_b;
81
82 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
83 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
84 || (acpi_gbl_FADT.sleep_control.address
85 && acpi_gbl_FADT.sleep_status.address));
86}
87
88#ifdef CONFIG_ACPI_SLEEP
89static u32 acpi_target_sleep_state = ACPI_STATE_S0;
90
91u32 acpi_target_system_state(void)
92{
93 return acpi_target_sleep_state;
94}
95EXPORT_SYMBOL_GPL(acpi_target_system_state);
96
97static bool pwr_btn_event_pending;
98
99/*
100 * The ACPI specification wants us to save NVS memory regions during hibernation
101 * and to restore them during the subsequent resume. Windows does that also for
102 * suspend to RAM. However, it is known that this mechanism does not work on
103 * all machines, so we allow the user to disable it with the help of the
104 * 'acpi_sleep=nonvs' kernel command line option.
105 */
106static bool nvs_nosave;
107
108void __init acpi_nvs_nosave(void)
109{
110 nvs_nosave = true;
111}
112
113/*
114 * The ACPI specification wants us to save NVS memory regions during hibernation
115 * but says nothing about saving NVS during S3. Not all versions of Windows
116 * save NVS on S3 suspend either, and it is clear that not all systems need
117 * NVS to be saved at S3 time. To improve suspend/resume time, allow the
118 * user to disable saving NVS on S3 if their system does not require it, but
119 * continue to save/restore NVS for S4 as specified.
120 */
121static bool nvs_nosave_s3;
122
123void __init acpi_nvs_nosave_s3(void)
124{
125 nvs_nosave_s3 = true;
126}
127
128/*
129 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
130 * user to request that behavior by using the 'acpi_old_suspend_ordering'
131 * kernel command line option that causes the following variable to be set.
132 */
133static bool old_suspend_ordering;
134
135void __init acpi_old_suspend_ordering(void)
136{
137 old_suspend_ordering = true;
138}
139
140static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
141{
142 acpi_old_suspend_ordering();
143 return 0;
144}
145
146static int __init init_nvs_nosave(const struct dmi_system_id *d)
147{
148 acpi_nvs_nosave();
149 return 0;
150}
151
152static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
153 {
154 .callback = init_old_suspend_ordering,
155 .ident = "Abit KN9 (nForce4 variant)",
156 .matches = {
157 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
158 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
159 },
160 },
161 {
162 .callback = init_old_suspend_ordering,
163 .ident = "HP xw4600 Workstation",
164 .matches = {
165 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
166 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
167 },
168 },
169 {
170 .callback = init_old_suspend_ordering,
171 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
172 .matches = {
173 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
174 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
175 },
176 },
177 {
178 .callback = init_old_suspend_ordering,
179 .ident = "Panasonic CF51-2L",
180 .matches = {
181 DMI_MATCH(DMI_BOARD_VENDOR,
182 "Matsushita Electric Industrial Co.,Ltd."),
183 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
184 },
185 },
186 {
187 .callback = init_nvs_nosave,
188 .ident = "Sony Vaio VGN-FW41E_H",
189 .matches = {
190 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
191 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
192 },
193 },
194 {
195 .callback = init_nvs_nosave,
196 .ident = "Sony Vaio VGN-FW21E",
197 .matches = {
198 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
199 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
200 },
201 },
202 {
203 .callback = init_nvs_nosave,
204 .ident = "Sony Vaio VGN-FW21M",
205 .matches = {
206 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
207 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
208 },
209 },
210 {
211 .callback = init_nvs_nosave,
212 .ident = "Sony Vaio VPCEB17FX",
213 .matches = {
214 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
215 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
216 },
217 },
218 {
219 .callback = init_nvs_nosave,
220 .ident = "Sony Vaio VGN-SR11M",
221 .matches = {
222 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
223 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
224 },
225 },
226 {
227 .callback = init_nvs_nosave,
228 .ident = "Everex StepNote Series",
229 .matches = {
230 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
231 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
232 },
233 },
234 {
235 .callback = init_nvs_nosave,
236 .ident = "Sony Vaio VPCEB1Z1E",
237 .matches = {
238 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
239 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
240 },
241 },
242 {
243 .callback = init_nvs_nosave,
244 .ident = "Sony Vaio VGN-NW130D",
245 .matches = {
246 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
247 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
248 },
249 },
250 {
251 .callback = init_nvs_nosave,
252 .ident = "Sony Vaio VPCCW29FX",
253 .matches = {
254 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
255 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
256 },
257 },
258 {
259 .callback = init_nvs_nosave,
260 .ident = "Averatec AV1020-ED2",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
264 },
265 },
266 {
267 .callback = init_old_suspend_ordering,
268 .ident = "Asus A8N-SLI DELUXE",
269 .matches = {
270 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
271 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
272 },
273 },
274 {
275 .callback = init_old_suspend_ordering,
276 .ident = "Asus A8N-SLI Premium",
277 .matches = {
278 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
279 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
280 },
281 },
282 {
283 .callback = init_nvs_nosave,
284 .ident = "Sony Vaio VGN-SR26GN_P",
285 .matches = {
286 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
287 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
288 },
289 },
290 {
291 .callback = init_nvs_nosave,
292 .ident = "Sony Vaio VPCEB1S1E",
293 .matches = {
294 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
295 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
296 },
297 },
298 {
299 .callback = init_nvs_nosave,
300 .ident = "Sony Vaio VGN-FW520F",
301 .matches = {
302 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
303 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
304 },
305 },
306 {
307 .callback = init_nvs_nosave,
308 .ident = "Asus K54C",
309 .matches = {
310 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
311 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
312 },
313 },
314 {
315 .callback = init_nvs_nosave,
316 .ident = "Asus K54HR",
317 .matches = {
318 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
319 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
320 },
321 },
322 {},
323};
324
325static void __init acpi_sleep_dmi_check(void)
326{
327 int year;
328
329 if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2012)
330 acpi_nvs_nosave_s3();
331
332 dmi_check_system(acpisleep_dmi_table);
333}
334
335/**
336 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
337 */
338static int acpi_pm_freeze(void)
339{
340 acpi_disable_all_gpes();
341 acpi_os_wait_events_complete();
342 acpi_ec_block_transactions();
343 return 0;
344}
345
346/**
347 * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
348 */
349static int acpi_pm_pre_suspend(void)
350{
351 acpi_pm_freeze();
352 return suspend_nvs_save();
353}
354
355/**
356 * __acpi_pm_prepare - Prepare the platform to enter the target state.
357 *
358 * If necessary, set the firmware waking vector and do arch-specific
359 * nastiness to get the wakeup code to the waking vector.
360 */
361static int __acpi_pm_prepare(void)
362{
363 int error = acpi_sleep_prepare(acpi_target_sleep_state);
364 if (error)
365 acpi_target_sleep_state = ACPI_STATE_S0;
366
367 return error;
368}
369
370/**
371 * acpi_pm_prepare - Prepare the platform to enter the target sleep
372 * state and disable the GPEs.
373 */
374static int acpi_pm_prepare(void)
375{
376 int error = __acpi_pm_prepare();
377 if (!error)
378 error = acpi_pm_pre_suspend();
379
380 return error;
381}
382
383static int find_powerf_dev(struct device *dev, void *data)
384{
385 struct acpi_device *device = to_acpi_device(dev);
386 const char *hid = acpi_device_hid(device);
387
388 return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
389}
390
391/**
392 * acpi_pm_finish - Instruct the platform to leave a sleep state.
393 *
394 * This is called after we wake back up (or if entering the sleep state
395 * failed).
396 */
397static void acpi_pm_finish(void)
398{
399 struct device *pwr_btn_dev;
400 u32 acpi_state = acpi_target_sleep_state;
401
402 acpi_ec_unblock_transactions();
403 suspend_nvs_free();
404
405 if (acpi_state == ACPI_STATE_S0)
406 return;
407
408 printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
409 acpi_state);
410 acpi_disable_wakeup_devices(acpi_state);
411 acpi_leave_sleep_state(acpi_state);
412
413 /* reset firmware waking vector */
414 acpi_set_waking_vector(0);
415
416 acpi_target_sleep_state = ACPI_STATE_S0;
417
418 acpi_resume_power_resources();
419
420 /* If we were woken with the fixed power button, provide a small
421 * hint to userspace in the form of a wakeup event on the fixed power
422 * button device (if it can be found).
423 *
424 * We delay the event generation til now, as the PM layer requires
425 * timekeeping to be running before we generate events. */
426 if (!pwr_btn_event_pending)
427 return;
428
429 pwr_btn_event_pending = false;
430 pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
431 find_powerf_dev);
432 if (pwr_btn_dev) {
433 pm_wakeup_event(pwr_btn_dev, 0);
434 put_device(pwr_btn_dev);
435 }
436}
437
438/**
439 * acpi_pm_start - Start system PM transition.
440 */
441static void acpi_pm_start(u32 acpi_state)
442{
443 acpi_target_sleep_state = acpi_state;
444 acpi_sleep_tts_switch(acpi_target_sleep_state);
445 acpi_scan_lock_acquire();
446}
447
448/**
449 * acpi_pm_end - Finish up system PM transition.
450 */
451static void acpi_pm_end(void)
452{
453 acpi_scan_lock_release();
454 /*
455 * This is necessary in case acpi_pm_finish() is not called during a
456 * failing transition to a sleep state.
457 */
458 acpi_target_sleep_state = ACPI_STATE_S0;
459 acpi_sleep_tts_switch(acpi_target_sleep_state);
460}
461#else /* !CONFIG_ACPI_SLEEP */
462#define acpi_target_sleep_state ACPI_STATE_S0
463static inline void acpi_sleep_dmi_check(void) {}
464#endif /* CONFIG_ACPI_SLEEP */
465
466#ifdef CONFIG_SUSPEND
467static u32 acpi_suspend_states[] = {
468 [PM_SUSPEND_ON] = ACPI_STATE_S0,
469 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
470 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
471 [PM_SUSPEND_MAX] = ACPI_STATE_S5
472};
473
474/**
475 * acpi_suspend_begin - Set the target system sleep state to the state
476 * associated with given @pm_state, if supported.
477 */
478static int acpi_suspend_begin(suspend_state_t pm_state)
479{
480 u32 acpi_state = acpi_suspend_states[pm_state];
481 int error;
482
483 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
484 if (error)
485 return error;
486
487 if (!sleep_states[acpi_state]) {
488 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
489 return -ENOSYS;
490 }
491 if (acpi_state > ACPI_STATE_S1)
492 pm_set_suspend_via_firmware();
493
494 acpi_pm_start(acpi_state);
495 return 0;
496}
497
498/**
499 * acpi_suspend_enter - Actually enter a sleep state.
500 * @pm_state: ignored
501 *
502 * Flush caches and go to sleep. For STR we have to call arch-specific
503 * assembly, which in turn call acpi_enter_sleep_state().
504 * It's unfortunate, but it works. Please fix if you're feeling frisky.
505 */
506static int acpi_suspend_enter(suspend_state_t pm_state)
507{
508 acpi_status status = AE_OK;
509 u32 acpi_state = acpi_target_sleep_state;
510 int error;
511
512 ACPI_FLUSH_CPU_CACHE();
513
514 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
515 switch (acpi_state) {
516 case ACPI_STATE_S1:
517 barrier();
518 status = acpi_enter_sleep_state(acpi_state);
519 break;
520
521 case ACPI_STATE_S3:
522 if (!acpi_suspend_lowlevel)
523 return -ENOSYS;
524 error = acpi_suspend_lowlevel();
525 if (error)
526 return error;
527 pr_info(PREFIX "Low-level resume complete\n");
528 pm_set_resume_via_firmware();
529 break;
530 }
531 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
532
533 /* This violates the spec but is required for bug compatibility. */
534 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
535
536 /* Reprogram control registers */
537 acpi_leave_sleep_state_prep(acpi_state);
538
539 /* ACPI 3.0 specs (P62) says that it's the responsibility
540 * of the OSPM to clear the status bit [ implying that the
541 * POWER_BUTTON event should not reach userspace ]
542 *
543 * However, we do generate a small hint for userspace in the form of
544 * a wakeup event. We flag this condition for now and generate the
545 * event later, as we're currently too early in resume to be able to
546 * generate wakeup events.
547 */
548 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
549 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
550
551 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
552
553 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
554 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
555 /* Flag for later */
556 pwr_btn_event_pending = true;
557 }
558 }
559
560 /*
561 * Disable and clear GPE status before interrupt is enabled. Some GPEs
562 * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
563 * acpi_leave_sleep_state will reenable specific GPEs later
564 */
565 acpi_disable_all_gpes();
566 /* Allow EC transactions to happen. */
567 acpi_ec_unblock_transactions_early();
568
569 suspend_nvs_restore();
570
571 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
572}
573
574static int acpi_suspend_state_valid(suspend_state_t pm_state)
575{
576 u32 acpi_state;
577
578 switch (pm_state) {
579 case PM_SUSPEND_ON:
580 case PM_SUSPEND_STANDBY:
581 case PM_SUSPEND_MEM:
582 acpi_state = acpi_suspend_states[pm_state];
583
584 return sleep_states[acpi_state];
585 default:
586 return 0;
587 }
588}
589
590static const struct platform_suspend_ops acpi_suspend_ops = {
591 .valid = acpi_suspend_state_valid,
592 .begin = acpi_suspend_begin,
593 .prepare_late = acpi_pm_prepare,
594 .enter = acpi_suspend_enter,
595 .wake = acpi_pm_finish,
596 .end = acpi_pm_end,
597};
598
599/**
600 * acpi_suspend_begin_old - Set the target system sleep state to the
601 * state associated with given @pm_state, if supported, and
602 * execute the _PTS control method. This function is used if the
603 * pre-ACPI 2.0 suspend ordering has been requested.
604 */
605static int acpi_suspend_begin_old(suspend_state_t pm_state)
606{
607 int error = acpi_suspend_begin(pm_state);
608 if (!error)
609 error = __acpi_pm_prepare();
610
611 return error;
612}
613
614/*
615 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
616 * been requested.
617 */
618static const struct platform_suspend_ops acpi_suspend_ops_old = {
619 .valid = acpi_suspend_state_valid,
620 .begin = acpi_suspend_begin_old,
621 .prepare_late = acpi_pm_pre_suspend,
622 .enter = acpi_suspend_enter,
623 .wake = acpi_pm_finish,
624 .end = acpi_pm_end,
625 .recover = acpi_pm_finish,
626};
627
628static int acpi_freeze_begin(void)
629{
630 acpi_scan_lock_acquire();
631 return 0;
632}
633
634static int acpi_freeze_prepare(void)
635{
636 acpi_enable_wakeup_devices(ACPI_STATE_S0);
637 acpi_enable_all_wakeup_gpes();
638 acpi_os_wait_events_complete();
639 if (acpi_sci_irq_valid())
640 enable_irq_wake(acpi_sci_irq);
641 return 0;
642}
643
644static void acpi_freeze_restore(void)
645{
646 acpi_disable_wakeup_devices(ACPI_STATE_S0);
647 if (acpi_sci_irq_valid())
648 disable_irq_wake(acpi_sci_irq);
649 acpi_enable_all_runtime_gpes();
650}
651
652static void acpi_freeze_end(void)
653{
654 acpi_scan_lock_release();
655}
656
657static const struct platform_freeze_ops acpi_freeze_ops = {
658 .begin = acpi_freeze_begin,
659 .prepare = acpi_freeze_prepare,
660 .restore = acpi_freeze_restore,
661 .end = acpi_freeze_end,
662};
663
664static void acpi_sleep_suspend_setup(void)
665{
666 int i;
667
668 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
669 if (acpi_sleep_state_supported(i))
670 sleep_states[i] = 1;
671
672 suspend_set_ops(old_suspend_ordering ?
673 &acpi_suspend_ops_old : &acpi_suspend_ops);
674 freeze_set_ops(&acpi_freeze_ops);
675}
676
677#else /* !CONFIG_SUSPEND */
678static inline void acpi_sleep_suspend_setup(void) {}
679#endif /* !CONFIG_SUSPEND */
680
681#ifdef CONFIG_PM_SLEEP
682static u32 saved_bm_rld;
683
684static int acpi_save_bm_rld(void)
685{
686 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
687 return 0;
688}
689
690static void acpi_restore_bm_rld(void)
691{
692 u32 resumed_bm_rld = 0;
693
694 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
695 if (resumed_bm_rld == saved_bm_rld)
696 return;
697
698 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
699}
700
701static struct syscore_ops acpi_sleep_syscore_ops = {
702 .suspend = acpi_save_bm_rld,
703 .resume = acpi_restore_bm_rld,
704};
705
706void acpi_sleep_syscore_init(void)
707{
708 register_syscore_ops(&acpi_sleep_syscore_ops);
709}
710#else
711static inline void acpi_sleep_syscore_init(void) {}
712#endif /* CONFIG_PM_SLEEP */
713
714#ifdef CONFIG_HIBERNATION
715static unsigned long s4_hardware_signature;
716static struct acpi_table_facs *facs;
717static bool nosigcheck;
718
719void __init acpi_no_s4_hw_signature(void)
720{
721 nosigcheck = true;
722}
723
724static int acpi_hibernation_begin(void)
725{
726 int error;
727
728 error = nvs_nosave ? 0 : suspend_nvs_alloc();
729 if (!error)
730 acpi_pm_start(ACPI_STATE_S4);
731
732 return error;
733}
734
735static int acpi_hibernation_enter(void)
736{
737 acpi_status status = AE_OK;
738
739 ACPI_FLUSH_CPU_CACHE();
740
741 /* This shouldn't return. If it returns, we have a problem */
742 status = acpi_enter_sleep_state(ACPI_STATE_S4);
743 /* Reprogram control registers */
744 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
745
746 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
747}
748
749static void acpi_hibernation_leave(void)
750{
751 pm_set_resume_via_firmware();
752 /*
753 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
754 * enable it here.
755 */
756 acpi_enable();
757 /* Reprogram control registers */
758 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
759 /* Check the hardware signature */
760 if (facs && s4_hardware_signature != facs->hardware_signature)
761 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
762 /* Restore the NVS memory area */
763 suspend_nvs_restore();
764 /* Allow EC transactions to happen. */
765 acpi_ec_unblock_transactions_early();
766}
767
768static void acpi_pm_thaw(void)
769{
770 acpi_ec_unblock_transactions();
771 acpi_enable_all_runtime_gpes();
772}
773
774static const struct platform_hibernation_ops acpi_hibernation_ops = {
775 .begin = acpi_hibernation_begin,
776 .end = acpi_pm_end,
777 .pre_snapshot = acpi_pm_prepare,
778 .finish = acpi_pm_finish,
779 .prepare = acpi_pm_prepare,
780 .enter = acpi_hibernation_enter,
781 .leave = acpi_hibernation_leave,
782 .pre_restore = acpi_pm_freeze,
783 .restore_cleanup = acpi_pm_thaw,
784};
785
786/**
787 * acpi_hibernation_begin_old - Set the target system sleep state to
788 * ACPI_STATE_S4 and execute the _PTS control method. This
789 * function is used if the pre-ACPI 2.0 suspend ordering has been
790 * requested.
791 */
792static int acpi_hibernation_begin_old(void)
793{
794 int error;
795 /*
796 * The _TTS object should always be evaluated before the _PTS object.
797 * When the old_suspended_ordering is true, the _PTS object is
798 * evaluated in the acpi_sleep_prepare.
799 */
800 acpi_sleep_tts_switch(ACPI_STATE_S4);
801
802 error = acpi_sleep_prepare(ACPI_STATE_S4);
803
804 if (!error) {
805 if (!nvs_nosave)
806 error = suspend_nvs_alloc();
807 if (!error) {
808 acpi_target_sleep_state = ACPI_STATE_S4;
809 acpi_scan_lock_acquire();
810 }
811 }
812 return error;
813}
814
815/*
816 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
817 * been requested.
818 */
819static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
820 .begin = acpi_hibernation_begin_old,
821 .end = acpi_pm_end,
822 .pre_snapshot = acpi_pm_pre_suspend,
823 .prepare = acpi_pm_freeze,
824 .finish = acpi_pm_finish,
825 .enter = acpi_hibernation_enter,
826 .leave = acpi_hibernation_leave,
827 .pre_restore = acpi_pm_freeze,
828 .restore_cleanup = acpi_pm_thaw,
829 .recover = acpi_pm_finish,
830};
831
832static void acpi_sleep_hibernate_setup(void)
833{
834 if (!acpi_sleep_state_supported(ACPI_STATE_S4))
835 return;
836
837 hibernation_set_ops(old_suspend_ordering ?
838 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
839 sleep_states[ACPI_STATE_S4] = 1;
840 if (nosigcheck)
841 return;
842
843 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
844 if (facs)
845 s4_hardware_signature = facs->hardware_signature;
846}
847#else /* !CONFIG_HIBERNATION */
848static inline void acpi_sleep_hibernate_setup(void) {}
849#endif /* !CONFIG_HIBERNATION */
850
851static void acpi_power_off_prepare(void)
852{
853 /* Prepare to power off the system */
854 acpi_sleep_prepare(ACPI_STATE_S5);
855 acpi_disable_all_gpes();
856 acpi_os_wait_events_complete();
857}
858
859static void acpi_power_off(void)
860{
861 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
862 printk(KERN_DEBUG "%s called\n", __func__);
863 local_irq_disable();
864 acpi_enter_sleep_state(ACPI_STATE_S5);
865}
866
867int __init acpi_sleep_init(void)
868{
869 char supported[ACPI_S_STATE_COUNT * 3 + 1];
870 char *pos = supported;
871 int i;
872
873 acpi_sleep_dmi_check();
874
875 sleep_states[ACPI_STATE_S0] = 1;
876
877 acpi_sleep_syscore_init();
878 acpi_sleep_suspend_setup();
879 acpi_sleep_hibernate_setup();
880
881 if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
882 sleep_states[ACPI_STATE_S5] = 1;
883 pm_power_off_prepare = acpi_power_off_prepare;
884 pm_power_off = acpi_power_off;
885 }
886
887 supported[0] = 0;
888 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
889 if (sleep_states[i])
890 pos += sprintf(pos, " S%d", i);
891 }
892 pr_info(PREFIX "(supports%s)\n", supported);
893
894 /*
895 * Register the tts_notifier to reboot notifier list so that the _TTS
896 * object can also be evaluated when the system enters S5.
897 */
898 register_reboot_notifier(&tts_notifier);
899 return 0;
900}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * sleep.c - ACPI sleep support.
4 *
5 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
6 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
7 * Copyright (c) 2000-2003 Patrick Mochel
8 * Copyright (c) 2003 Open Source Development Lab
9 */
10
11#define pr_fmt(fmt) "ACPI: PM: " fmt
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/interrupt.h>
18#include <linux/suspend.h>
19#include <linux/reboot.h>
20#include <linux/acpi.h>
21#include <linux/module.h>
22#include <linux/syscore_ops.h>
23#include <asm/io.h>
24#include <trace/events/power.h>
25
26#include "internal.h"
27#include "sleep.h"
28
29/*
30 * Some HW-full platforms do not have _S5, so they may need
31 * to leverage efi power off for a shutdown.
32 */
33bool acpi_no_s5;
34static u8 sleep_states[ACPI_S_STATE_COUNT];
35
36static void acpi_sleep_tts_switch(u32 acpi_state)
37{
38 acpi_status status;
39
40 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
41 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
42 /*
43 * OS can't evaluate the _TTS object correctly. Some warning
44 * message will be printed. But it won't break anything.
45 */
46 pr_notice("Failure in evaluating _TTS object\n");
47 }
48}
49
50static int tts_notify_reboot(struct notifier_block *this,
51 unsigned long code, void *x)
52{
53 acpi_sleep_tts_switch(ACPI_STATE_S5);
54 return NOTIFY_DONE;
55}
56
57static struct notifier_block tts_notifier = {
58 .notifier_call = tts_notify_reboot,
59 .next = NULL,
60 .priority = 0,
61};
62
63#ifndef acpi_skip_set_wakeup_address
64#define acpi_skip_set_wakeup_address() false
65#endif
66
67static int acpi_sleep_prepare(u32 acpi_state)
68{
69#ifdef CONFIG_ACPI_SLEEP
70 unsigned long acpi_wakeup_address;
71
72 /* do we have a wakeup address for S2 and S3? */
73 if (acpi_state == ACPI_STATE_S3 && !acpi_skip_set_wakeup_address()) {
74 acpi_wakeup_address = acpi_get_wakeup_address();
75 if (!acpi_wakeup_address)
76 return -EFAULT;
77 acpi_set_waking_vector(acpi_wakeup_address);
78
79 }
80#endif
81 pr_info("Preparing to enter system sleep state S%d\n", acpi_state);
82 acpi_enable_wakeup_devices(acpi_state);
83 acpi_enter_sleep_state_prep(acpi_state);
84 return 0;
85}
86
87bool acpi_sleep_state_supported(u8 sleep_state)
88{
89 acpi_status status;
90 u8 type_a, type_b;
91
92 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
93 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
94 || (acpi_gbl_FADT.sleep_control.address
95 && acpi_gbl_FADT.sleep_status.address));
96}
97
98#ifdef CONFIG_ACPI_SLEEP
99static u32 acpi_target_sleep_state = ACPI_STATE_S0;
100
101u32 acpi_target_system_state(void)
102{
103 return acpi_target_sleep_state;
104}
105EXPORT_SYMBOL_GPL(acpi_target_system_state);
106
107static bool pwr_btn_event_pending;
108
109/*
110 * The ACPI specification wants us to save NVS memory regions during hibernation
111 * and to restore them during the subsequent resume. Windows does that also for
112 * suspend to RAM. However, it is known that this mechanism does not work on
113 * all machines, so we allow the user to disable it with the help of the
114 * 'acpi_sleep=nonvs' kernel command line option.
115 */
116static bool nvs_nosave;
117
118void __init acpi_nvs_nosave(void)
119{
120 nvs_nosave = true;
121}
122
123/*
124 * The ACPI specification wants us to save NVS memory regions during hibernation
125 * but says nothing about saving NVS during S3. Not all versions of Windows
126 * save NVS on S3 suspend either, and it is clear that not all systems need
127 * NVS to be saved at S3 time. To improve suspend/resume time, allow the
128 * user to disable saving NVS on S3 if their system does not require it, but
129 * continue to save/restore NVS for S4 as specified.
130 */
131static bool nvs_nosave_s3;
132
133void __init acpi_nvs_nosave_s3(void)
134{
135 nvs_nosave_s3 = true;
136}
137
138static int __init init_nvs_save_s3(const struct dmi_system_id *d)
139{
140 nvs_nosave_s3 = false;
141 return 0;
142}
143
144/*
145 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
146 * user to request that behavior by using the 'acpi_old_suspend_ordering'
147 * kernel command line option that causes the following variable to be set.
148 */
149static bool old_suspend_ordering;
150
151void __init acpi_old_suspend_ordering(void)
152{
153 old_suspend_ordering = true;
154}
155
156static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
157{
158 acpi_old_suspend_ordering();
159 return 0;
160}
161
162static int __init init_nvs_nosave(const struct dmi_system_id *d)
163{
164 acpi_nvs_nosave();
165 return 0;
166}
167
168bool acpi_sleep_default_s3;
169
170static int __init init_default_s3(const struct dmi_system_id *d)
171{
172 acpi_sleep_default_s3 = true;
173 return 0;
174}
175
176static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
177 {
178 .callback = init_old_suspend_ordering,
179 .ident = "Abit KN9 (nForce4 variant)",
180 .matches = {
181 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
182 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
183 },
184 },
185 {
186 .callback = init_old_suspend_ordering,
187 .ident = "HP xw4600 Workstation",
188 .matches = {
189 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
190 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
191 },
192 },
193 {
194 .callback = init_old_suspend_ordering,
195 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
196 .matches = {
197 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
198 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
199 },
200 },
201 {
202 .callback = init_old_suspend_ordering,
203 .ident = "Panasonic CF51-2L",
204 .matches = {
205 DMI_MATCH(DMI_BOARD_VENDOR,
206 "Matsushita Electric Industrial Co.,Ltd."),
207 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
208 },
209 },
210 {
211 .callback = init_nvs_nosave,
212 .ident = "Sony Vaio VGN-FW41E_H",
213 .matches = {
214 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
215 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
216 },
217 },
218 {
219 .callback = init_nvs_nosave,
220 .ident = "Sony Vaio VGN-FW21E",
221 .matches = {
222 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
223 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
224 },
225 },
226 {
227 .callback = init_nvs_nosave,
228 .ident = "Sony Vaio VGN-FW21M",
229 .matches = {
230 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
231 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
232 },
233 },
234 {
235 .callback = init_nvs_nosave,
236 .ident = "Sony Vaio VPCEB17FX",
237 .matches = {
238 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
239 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
240 },
241 },
242 {
243 .callback = init_nvs_nosave,
244 .ident = "Sony Vaio VGN-SR11M",
245 .matches = {
246 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
247 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
248 },
249 },
250 {
251 .callback = init_nvs_nosave,
252 .ident = "Everex StepNote Series",
253 .matches = {
254 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
255 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
256 },
257 },
258 {
259 .callback = init_nvs_nosave,
260 .ident = "Sony Vaio VPCEB1Z1E",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
264 },
265 },
266 {
267 .callback = init_nvs_nosave,
268 .ident = "Sony Vaio VGN-NW130D",
269 .matches = {
270 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
271 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
272 },
273 },
274 {
275 .callback = init_nvs_nosave,
276 .ident = "Sony Vaio VPCCW29FX",
277 .matches = {
278 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
279 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
280 },
281 },
282 {
283 .callback = init_nvs_nosave,
284 .ident = "Averatec AV1020-ED2",
285 .matches = {
286 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
287 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
288 },
289 },
290 {
291 .callback = init_old_suspend_ordering,
292 .ident = "Asus A8N-SLI DELUXE",
293 .matches = {
294 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
295 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
296 },
297 },
298 {
299 .callback = init_old_suspend_ordering,
300 .ident = "Asus A8N-SLI Premium",
301 .matches = {
302 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
303 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
304 },
305 },
306 {
307 .callback = init_nvs_nosave,
308 .ident = "Sony Vaio VGN-SR26GN_P",
309 .matches = {
310 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
311 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
312 },
313 },
314 {
315 .callback = init_nvs_nosave,
316 .ident = "Sony Vaio VPCEB1S1E",
317 .matches = {
318 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
319 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
320 },
321 },
322 {
323 .callback = init_nvs_nosave,
324 .ident = "Sony Vaio VGN-FW520F",
325 .matches = {
326 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
327 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
328 },
329 },
330 {
331 .callback = init_nvs_nosave,
332 .ident = "Asus K54C",
333 .matches = {
334 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
335 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
336 },
337 },
338 {
339 .callback = init_nvs_nosave,
340 .ident = "Asus K54HR",
341 .matches = {
342 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
343 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
344 },
345 },
346 {
347 .callback = init_nvs_save_s3,
348 .ident = "Asus 1025C",
349 .matches = {
350 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
351 DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
352 },
353 },
354 /*
355 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
356 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
357 * saving during S3.
358 */
359 {
360 .callback = init_nvs_save_s3,
361 .ident = "Lenovo G50-45",
362 .matches = {
363 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
364 DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
365 },
366 },
367 {
368 .callback = init_nvs_save_s3,
369 .ident = "Lenovo G40-45",
370 .matches = {
371 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
372 DMI_MATCH(DMI_PRODUCT_NAME, "80E1"),
373 },
374 },
375 /*
376 * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using
377 * the Low Power S0 Idle firmware interface (see
378 * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
379 */
380 {
381 .callback = init_default_s3,
382 .ident = "ThinkPad X1 Tablet(2016)",
383 .matches = {
384 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
385 DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
386 },
387 },
388 {},
389};
390
391static bool ignore_blacklist;
392
393void __init acpi_sleep_no_blacklist(void)
394{
395 ignore_blacklist = true;
396}
397
398static void __init acpi_sleep_dmi_check(void)
399{
400 if (ignore_blacklist)
401 return;
402
403 if (dmi_get_bios_year() >= 2012)
404 acpi_nvs_nosave_s3();
405
406 dmi_check_system(acpisleep_dmi_table);
407}
408
409/**
410 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
411 */
412static int acpi_pm_freeze(void)
413{
414 acpi_disable_all_gpes();
415 acpi_os_wait_events_complete();
416 acpi_ec_block_transactions();
417 return 0;
418}
419
420/**
421 * acpi_pm_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
422 */
423static int acpi_pm_pre_suspend(void)
424{
425 acpi_pm_freeze();
426 return suspend_nvs_save();
427}
428
429/**
430 * __acpi_pm_prepare - Prepare the platform to enter the target state.
431 *
432 * If necessary, set the firmware waking vector and do arch-specific
433 * nastiness to get the wakeup code to the waking vector.
434 */
435static int __acpi_pm_prepare(void)
436{
437 int error = acpi_sleep_prepare(acpi_target_sleep_state);
438 if (error)
439 acpi_target_sleep_state = ACPI_STATE_S0;
440
441 return error;
442}
443
444/**
445 * acpi_pm_prepare - Prepare the platform to enter the target sleep
446 * state and disable the GPEs.
447 */
448static int acpi_pm_prepare(void)
449{
450 int error = __acpi_pm_prepare();
451 if (!error)
452 error = acpi_pm_pre_suspend();
453
454 return error;
455}
456
457/**
458 * acpi_pm_finish - Instruct the platform to leave a sleep state.
459 *
460 * This is called after we wake back up (or if entering the sleep state
461 * failed).
462 */
463static void acpi_pm_finish(void)
464{
465 struct acpi_device *pwr_btn_adev;
466 u32 acpi_state = acpi_target_sleep_state;
467
468 acpi_ec_unblock_transactions();
469 suspend_nvs_free();
470
471 if (acpi_state == ACPI_STATE_S0)
472 return;
473
474 pr_info("Waking up from system sleep state S%d\n", acpi_state);
475 acpi_disable_wakeup_devices(acpi_state);
476 acpi_leave_sleep_state(acpi_state);
477
478 /* reset firmware waking vector */
479 acpi_set_waking_vector(0);
480
481 acpi_target_sleep_state = ACPI_STATE_S0;
482
483 acpi_resume_power_resources();
484
485 /* If we were woken with the fixed power button, provide a small
486 * hint to userspace in the form of a wakeup event on the fixed power
487 * button device (if it can be found).
488 *
489 * We delay the event generation til now, as the PM layer requires
490 * timekeeping to be running before we generate events. */
491 if (!pwr_btn_event_pending)
492 return;
493
494 pwr_btn_event_pending = false;
495 pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF,
496 NULL, -1);
497 if (pwr_btn_adev) {
498 pm_wakeup_event(&pwr_btn_adev->dev, 0);
499 acpi_dev_put(pwr_btn_adev);
500 }
501}
502
503/**
504 * acpi_pm_start - Start system PM transition.
505 * @acpi_state: The target ACPI power state to transition to.
506 */
507static void acpi_pm_start(u32 acpi_state)
508{
509 acpi_target_sleep_state = acpi_state;
510 acpi_sleep_tts_switch(acpi_target_sleep_state);
511 acpi_scan_lock_acquire();
512}
513
514/**
515 * acpi_pm_end - Finish up system PM transition.
516 */
517static void acpi_pm_end(void)
518{
519 acpi_turn_off_unused_power_resources();
520 acpi_scan_lock_release();
521 /*
522 * This is necessary in case acpi_pm_finish() is not called during a
523 * failing transition to a sleep state.
524 */
525 acpi_target_sleep_state = ACPI_STATE_S0;
526 acpi_sleep_tts_switch(acpi_target_sleep_state);
527}
528#else /* !CONFIG_ACPI_SLEEP */
529#define sleep_no_lps0 (1)
530#define acpi_target_sleep_state ACPI_STATE_S0
531#define acpi_sleep_default_s3 (1)
532static inline void acpi_sleep_dmi_check(void) {}
533#endif /* CONFIG_ACPI_SLEEP */
534
535#ifdef CONFIG_SUSPEND
536static u32 acpi_suspend_states[] = {
537 [PM_SUSPEND_ON] = ACPI_STATE_S0,
538 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
539 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
540 [PM_SUSPEND_MAX] = ACPI_STATE_S5
541};
542
543/**
544 * acpi_suspend_begin - Set the target system sleep state to the state
545 * associated with given @pm_state, if supported.
546 * @pm_state: The target system power management state.
547 */
548static int acpi_suspend_begin(suspend_state_t pm_state)
549{
550 u32 acpi_state = acpi_suspend_states[pm_state];
551 int error;
552
553 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
554 if (error)
555 return error;
556
557 if (!sleep_states[acpi_state]) {
558 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
559 return -ENOSYS;
560 }
561 if (acpi_state > ACPI_STATE_S1)
562 pm_set_suspend_via_firmware();
563
564 acpi_pm_start(acpi_state);
565 return 0;
566}
567
568/**
569 * acpi_suspend_enter - Actually enter a sleep state.
570 * @pm_state: ignored
571 *
572 * Flush caches and go to sleep. For STR we have to call arch-specific
573 * assembly, which in turn call acpi_enter_sleep_state().
574 * It's unfortunate, but it works. Please fix if you're feeling frisky.
575 */
576static int acpi_suspend_enter(suspend_state_t pm_state)
577{
578 acpi_status status = AE_OK;
579 u32 acpi_state = acpi_target_sleep_state;
580 int error;
581
582 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
583 switch (acpi_state) {
584 case ACPI_STATE_S1:
585 barrier();
586 status = acpi_enter_sleep_state(acpi_state);
587 break;
588
589 case ACPI_STATE_S3:
590 if (!acpi_suspend_lowlevel)
591 return -ENOSYS;
592 error = acpi_suspend_lowlevel();
593 if (error)
594 return error;
595 pr_info("Low-level resume complete\n");
596 pm_set_resume_via_firmware();
597 break;
598 }
599 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
600
601 /* This violates the spec but is required for bug compatibility. */
602 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
603
604 /* Reprogram control registers */
605 acpi_leave_sleep_state_prep(acpi_state);
606
607 /* ACPI 3.0 specs (P62) says that it's the responsibility
608 * of the OSPM to clear the status bit [ implying that the
609 * POWER_BUTTON event should not reach userspace ]
610 *
611 * However, we do generate a small hint for userspace in the form of
612 * a wakeup event. We flag this condition for now and generate the
613 * event later, as we're currently too early in resume to be able to
614 * generate wakeup events.
615 */
616 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
617 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
618
619 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
620
621 if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) {
622 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
623 /* Flag for later */
624 pwr_btn_event_pending = true;
625 }
626 }
627
628 /*
629 * Disable all GPE and clear their status bits before interrupts are
630 * enabled. Some GPEs (like wakeup GPEs) have no handlers and this can
631 * prevent them from producing spurious interrups.
632 *
633 * acpi_leave_sleep_state() will reenable specific GPEs later.
634 *
635 * Because this code runs on one CPU with disabled interrupts (all of
636 * the other CPUs are offline at this time), it need not acquire any
637 * sleeping locks which may trigger an implicit preemption point even
638 * if there is no contention, so avoid doing that by using a low-level
639 * library routine here.
640 */
641 acpi_hw_disable_all_gpes();
642 /* Allow EC transactions to happen. */
643 acpi_ec_unblock_transactions();
644
645 suspend_nvs_restore();
646
647 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
648}
649
650static int acpi_suspend_state_valid(suspend_state_t pm_state)
651{
652 u32 acpi_state;
653
654 switch (pm_state) {
655 case PM_SUSPEND_ON:
656 case PM_SUSPEND_STANDBY:
657 case PM_SUSPEND_MEM:
658 acpi_state = acpi_suspend_states[pm_state];
659
660 return sleep_states[acpi_state];
661 default:
662 return 0;
663 }
664}
665
666static const struct platform_suspend_ops acpi_suspend_ops = {
667 .valid = acpi_suspend_state_valid,
668 .begin = acpi_suspend_begin,
669 .prepare_late = acpi_pm_prepare,
670 .enter = acpi_suspend_enter,
671 .wake = acpi_pm_finish,
672 .end = acpi_pm_end,
673};
674
675/**
676 * acpi_suspend_begin_old - Set the target system sleep state to the
677 * state associated with given @pm_state, if supported, and
678 * execute the _PTS control method. This function is used if the
679 * pre-ACPI 2.0 suspend ordering has been requested.
680 * @pm_state: The target suspend state for the system.
681 */
682static int acpi_suspend_begin_old(suspend_state_t pm_state)
683{
684 int error = acpi_suspend_begin(pm_state);
685 if (!error)
686 error = __acpi_pm_prepare();
687
688 return error;
689}
690
691/*
692 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
693 * been requested.
694 */
695static const struct platform_suspend_ops acpi_suspend_ops_old = {
696 .valid = acpi_suspend_state_valid,
697 .begin = acpi_suspend_begin_old,
698 .prepare_late = acpi_pm_pre_suspend,
699 .enter = acpi_suspend_enter,
700 .wake = acpi_pm_finish,
701 .end = acpi_pm_end,
702 .recover = acpi_pm_finish,
703};
704
705static bool s2idle_wakeup;
706
707int acpi_s2idle_begin(void)
708{
709 acpi_scan_lock_acquire();
710 return 0;
711}
712
713int acpi_s2idle_prepare(void)
714{
715 if (acpi_sci_irq_valid()) {
716 int error;
717
718 error = enable_irq_wake(acpi_sci_irq);
719 if (error)
720 pr_warn("Warning: Failed to enable wakeup from IRQ %d: %d\n",
721 acpi_sci_irq, error);
722
723 acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE);
724 }
725
726 acpi_enable_wakeup_devices(ACPI_STATE_S0);
727
728 /* Change the configuration of GPEs to avoid spurious wakeup. */
729 acpi_enable_all_wakeup_gpes();
730 acpi_os_wait_events_complete();
731
732 s2idle_wakeup = true;
733 return 0;
734}
735
736bool acpi_s2idle_wake(void)
737{
738 if (!acpi_sci_irq_valid())
739 return pm_wakeup_pending();
740
741 while (pm_wakeup_pending()) {
742 /*
743 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the
744 * SCI has not triggered while suspended, so bail out (the
745 * wakeup is pending anyway and the SCI is not the source of
746 * it).
747 */
748 if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) {
749 pm_pr_dbg("Wakeup unrelated to ACPI SCI\n");
750 return true;
751 }
752
753 /*
754 * If the status bit of any enabled fixed event is set, the
755 * wakeup is regarded as valid.
756 */
757 if (acpi_any_fixed_event_status_set()) {
758 pm_pr_dbg("ACPI fixed event wakeup\n");
759 return true;
760 }
761
762 /* Check wakeups from drivers sharing the SCI. */
763 if (acpi_check_wakeup_handlers()) {
764 pm_pr_dbg("ACPI custom handler wakeup\n");
765 return true;
766 }
767
768 /*
769 * Check non-EC GPE wakeups and if there are none, cancel the
770 * SCI-related wakeup and dispatch the EC GPE.
771 */
772 if (acpi_ec_dispatch_gpe()) {
773 pm_pr_dbg("ACPI non-EC GPE wakeup\n");
774 return true;
775 }
776
777 acpi_os_wait_events_complete();
778
779 /*
780 * The SCI is in the "suspended" state now and it cannot produce
781 * new wakeup events till the rearming below, so if any of them
782 * are pending here, they must be resulting from the processing
783 * of EC events above or coming from somewhere else.
784 */
785 if (pm_wakeup_pending()) {
786 pm_pr_dbg("Wakeup after ACPI Notify sync\n");
787 return true;
788 }
789
790 pm_pr_dbg("Rearming ACPI SCI for wakeup\n");
791
792 pm_wakeup_clear(acpi_sci_irq);
793 rearm_wake_irq(acpi_sci_irq);
794 }
795
796 return false;
797}
798
799void acpi_s2idle_restore(void)
800{
801 /*
802 * Drain pending events before restoring the working-state configuration
803 * of GPEs.
804 */
805 acpi_os_wait_events_complete(); /* synchronize GPE processing */
806 acpi_ec_flush_work(); /* flush the EC driver's workqueues */
807 acpi_os_wait_events_complete(); /* synchronize Notify handling */
808
809 s2idle_wakeup = false;
810
811 acpi_enable_all_runtime_gpes();
812
813 acpi_disable_wakeup_devices(ACPI_STATE_S0);
814
815 if (acpi_sci_irq_valid()) {
816 acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE);
817 disable_irq_wake(acpi_sci_irq);
818 }
819}
820
821void acpi_s2idle_end(void)
822{
823 acpi_scan_lock_release();
824}
825
826static const struct platform_s2idle_ops acpi_s2idle_ops = {
827 .begin = acpi_s2idle_begin,
828 .prepare = acpi_s2idle_prepare,
829 .wake = acpi_s2idle_wake,
830 .restore = acpi_s2idle_restore,
831 .end = acpi_s2idle_end,
832};
833
834void __weak acpi_s2idle_setup(void)
835{
836 if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
837 pr_info("Efficient low-power S0 idle declared\n");
838
839 s2idle_set_ops(&acpi_s2idle_ops);
840}
841
842static void __init acpi_sleep_suspend_setup(void)
843{
844 bool suspend_ops_needed = false;
845 int i;
846
847 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
848 if (acpi_sleep_state_supported(i)) {
849 sleep_states[i] = 1;
850 suspend_ops_needed = true;
851 }
852
853 if (suspend_ops_needed)
854 suspend_set_ops(old_suspend_ordering ?
855 &acpi_suspend_ops_old : &acpi_suspend_ops);
856
857 acpi_s2idle_setup();
858}
859
860#else /* !CONFIG_SUSPEND */
861#define s2idle_wakeup (false)
862static inline void acpi_sleep_suspend_setup(void) {}
863#endif /* !CONFIG_SUSPEND */
864
865bool acpi_s2idle_wakeup(void)
866{
867 return s2idle_wakeup;
868}
869
870#ifdef CONFIG_PM_SLEEP
871static u32 saved_bm_rld;
872
873static int acpi_save_bm_rld(void)
874{
875 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
876 return 0;
877}
878
879static void acpi_restore_bm_rld(void)
880{
881 u32 resumed_bm_rld = 0;
882
883 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
884 if (resumed_bm_rld == saved_bm_rld)
885 return;
886
887 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
888}
889
890static struct syscore_ops acpi_sleep_syscore_ops = {
891 .suspend = acpi_save_bm_rld,
892 .resume = acpi_restore_bm_rld,
893};
894
895static void acpi_sleep_syscore_init(void)
896{
897 register_syscore_ops(&acpi_sleep_syscore_ops);
898}
899#else
900static inline void acpi_sleep_syscore_init(void) {}
901#endif /* CONFIG_PM_SLEEP */
902
903#ifdef CONFIG_HIBERNATION
904static unsigned long s4_hardware_signature;
905static struct acpi_table_facs *facs;
906int acpi_check_s4_hw_signature = -1; /* Default behaviour is just to warn */
907
908static int acpi_hibernation_begin(pm_message_t stage)
909{
910 if (!nvs_nosave) {
911 int error = suspend_nvs_alloc();
912 if (error)
913 return error;
914 }
915
916 if (stage.event == PM_EVENT_HIBERNATE)
917 pm_set_suspend_via_firmware();
918
919 acpi_pm_start(ACPI_STATE_S4);
920 return 0;
921}
922
923static int acpi_hibernation_enter(void)
924{
925 acpi_status status = AE_OK;
926
927 /* This shouldn't return. If it returns, we have a problem */
928 status = acpi_enter_sleep_state(ACPI_STATE_S4);
929 /* Reprogram control registers */
930 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
931
932 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
933}
934
935static void acpi_hibernation_leave(void)
936{
937 pm_set_resume_via_firmware();
938 /*
939 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
940 * enable it here.
941 */
942 acpi_enable();
943 /* Reprogram control registers */
944 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
945 /* Check the hardware signature */
946 if (facs && s4_hardware_signature != facs->hardware_signature)
947 pr_crit("Hardware changed while hibernated, success doubtful!\n");
948 /* Restore the NVS memory area */
949 suspend_nvs_restore();
950 /* Allow EC transactions to happen. */
951 acpi_ec_unblock_transactions();
952}
953
954static void acpi_pm_thaw(void)
955{
956 acpi_ec_unblock_transactions();
957 acpi_enable_all_runtime_gpes();
958}
959
960static const struct platform_hibernation_ops acpi_hibernation_ops = {
961 .begin = acpi_hibernation_begin,
962 .end = acpi_pm_end,
963 .pre_snapshot = acpi_pm_prepare,
964 .finish = acpi_pm_finish,
965 .prepare = acpi_pm_prepare,
966 .enter = acpi_hibernation_enter,
967 .leave = acpi_hibernation_leave,
968 .pre_restore = acpi_pm_freeze,
969 .restore_cleanup = acpi_pm_thaw,
970};
971
972/**
973 * acpi_hibernation_begin_old - Set the target system sleep state to
974 * ACPI_STATE_S4 and execute the _PTS control method. This
975 * function is used if the pre-ACPI 2.0 suspend ordering has been
976 * requested.
977 * @stage: The power management event message.
978 */
979static int acpi_hibernation_begin_old(pm_message_t stage)
980{
981 int error;
982 /*
983 * The _TTS object should always be evaluated before the _PTS object.
984 * When the old_suspended_ordering is true, the _PTS object is
985 * evaluated in the acpi_sleep_prepare.
986 */
987 acpi_sleep_tts_switch(ACPI_STATE_S4);
988
989 error = acpi_sleep_prepare(ACPI_STATE_S4);
990 if (error)
991 return error;
992
993 if (!nvs_nosave) {
994 error = suspend_nvs_alloc();
995 if (error)
996 return error;
997 }
998
999 if (stage.event == PM_EVENT_HIBERNATE)
1000 pm_set_suspend_via_firmware();
1001
1002 acpi_target_sleep_state = ACPI_STATE_S4;
1003 acpi_scan_lock_acquire();
1004 return 0;
1005}
1006
1007/*
1008 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
1009 * been requested.
1010 */
1011static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
1012 .begin = acpi_hibernation_begin_old,
1013 .end = acpi_pm_end,
1014 .pre_snapshot = acpi_pm_pre_suspend,
1015 .prepare = acpi_pm_freeze,
1016 .finish = acpi_pm_finish,
1017 .enter = acpi_hibernation_enter,
1018 .leave = acpi_hibernation_leave,
1019 .pre_restore = acpi_pm_freeze,
1020 .restore_cleanup = acpi_pm_thaw,
1021 .recover = acpi_pm_finish,
1022};
1023
1024static void acpi_sleep_hibernate_setup(void)
1025{
1026 if (!acpi_sleep_state_supported(ACPI_STATE_S4))
1027 return;
1028
1029 hibernation_set_ops(old_suspend_ordering ?
1030 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
1031 sleep_states[ACPI_STATE_S4] = 1;
1032 if (!acpi_check_s4_hw_signature)
1033 return;
1034
1035 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
1036 if (facs) {
1037 /*
1038 * s4_hardware_signature is the local variable which is just
1039 * used to warn about mismatch after we're attempting to
1040 * resume (in violation of the ACPI specification.)
1041 */
1042 s4_hardware_signature = facs->hardware_signature;
1043
1044 if (acpi_check_s4_hw_signature > 0) {
1045 /*
1046 * If we're actually obeying the ACPI specification
1047 * then the signature is written out as part of the
1048 * swsusp header, in order to allow the boot kernel
1049 * to gracefully decline to resume.
1050 */
1051 swsusp_hardware_signature = facs->hardware_signature;
1052 }
1053 }
1054}
1055#else /* !CONFIG_HIBERNATION */
1056static inline void acpi_sleep_hibernate_setup(void) {}
1057#endif /* !CONFIG_HIBERNATION */
1058
1059static int acpi_power_off_prepare(struct sys_off_data *data)
1060{
1061 /* Prepare to power off the system */
1062 acpi_sleep_prepare(ACPI_STATE_S5);
1063 acpi_disable_all_gpes();
1064 acpi_os_wait_events_complete();
1065 return NOTIFY_DONE;
1066}
1067
1068static int acpi_power_off(struct sys_off_data *data)
1069{
1070 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
1071 pr_debug("%s called\n", __func__);
1072 local_irq_disable();
1073 acpi_enter_sleep_state(ACPI_STATE_S5);
1074 return NOTIFY_DONE;
1075}
1076
1077int __init acpi_sleep_init(void)
1078{
1079 char supported[ACPI_S_STATE_COUNT * 3 + 1];
1080 char *pos = supported;
1081 int i;
1082
1083 acpi_sleep_dmi_check();
1084
1085 sleep_states[ACPI_STATE_S0] = 1;
1086
1087 acpi_sleep_syscore_init();
1088 acpi_sleep_suspend_setup();
1089 acpi_sleep_hibernate_setup();
1090
1091 if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
1092 sleep_states[ACPI_STATE_S5] = 1;
1093
1094 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF_PREPARE,
1095 SYS_OFF_PRIO_FIRMWARE,
1096 acpi_power_off_prepare, NULL);
1097
1098 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
1099 SYS_OFF_PRIO_FIRMWARE,
1100 acpi_power_off, NULL);
1101
1102 /*
1103 * Windows uses S5 for reboot, so some BIOSes depend on it to
1104 * perform proper reboot.
1105 */
1106 register_sys_off_handler(SYS_OFF_MODE_RESTART_PREPARE,
1107 SYS_OFF_PRIO_FIRMWARE,
1108 acpi_power_off_prepare, NULL);
1109 } else {
1110 acpi_no_s5 = true;
1111 }
1112
1113 supported[0] = 0;
1114 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
1115 if (sleep_states[i])
1116 pos += sprintf(pos, " S%d", i);
1117 }
1118 pr_info("(supports%s)\n", supported);
1119
1120 /*
1121 * Register the tts_notifier to reboot notifier list so that the _TTS
1122 * object can also be evaluated when the system enters S5.
1123 */
1124 register_reboot_notifier(&tts_notifier);
1125 return 0;
1126}