Linux Audio

Check our new training course

Loading...
v4.6
   1/*
   2   BlueZ - Bluetooth protocol stack for Linux
   3   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
 
   4
   5   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
   6
   7   This program is free software; you can redistribute it and/or modify
   8   it under the terms of the GNU General Public License version 2 as
   9   published by the Free Software Foundation;
  10
  11   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  12   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  13   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
  14   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
  15   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
  16   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  17   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  18   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  19
  20   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
  21   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
  22   SOFTWARE IS DISCLAIMED.
  23*/
  24
  25/* Bluetooth HCI connection handling. */
  26
  27#include <linux/export.h>
  28#include <linux/debugfs.h>
  29
  30#include <net/bluetooth/bluetooth.h>
  31#include <net/bluetooth/hci_core.h>
  32#include <net/bluetooth/l2cap.h>
 
 
  33
  34#include "hci_request.h"
  35#include "smp.h"
  36#include "a2mp.h"
  37
  38struct sco_param {
  39	u16 pkt_type;
  40	u16 max_latency;
  41	u8  retrans_effort;
  42};
  43
 
 
 
 
 
  44static const struct sco_param esco_param_cvsd[] = {
  45	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
  46	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
  47	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
  48	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
  49	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
  50};
  51
  52static const struct sco_param sco_param_cvsd[] = {
  53	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
  54	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
  55};
  56
  57static const struct sco_param esco_param_msbc[] = {
  58	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d,	0x02 }, /* T2 */
  59	{ EDR_ESCO_MASK | ESCO_EV3,   0x0008,	0x02 }, /* T1 */
  60};
  61
  62/* This function requires the caller holds hdev->lock */
  63static void hci_connect_le_scan_cleanup(struct hci_conn *conn)
  64{
  65	struct hci_conn_params *params;
  66	struct hci_dev *hdev = conn->hdev;
  67	struct smp_irk *irk;
  68	bdaddr_t *bdaddr;
  69	u8 bdaddr_type;
  70
  71	bdaddr = &conn->dst;
  72	bdaddr_type = conn->dst_type;
  73
  74	/* Check if we need to convert to identity address */
  75	irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
  76	if (irk) {
  77		bdaddr = &irk->bdaddr;
  78		bdaddr_type = irk->addr_type;
  79	}
  80
  81	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
  82					   bdaddr_type);
  83	if (!params || !params->explicit_connect)
 
 
 
 
 
 
 
 
 
  84		return;
  85
 
 
 
 
 
 
 
 
 
 
  86	/* The connection attempt was doing scan for new RPA, and is
  87	 * in scan phase. If params are not associated with any other
  88	 * autoconnect action, remove them completely. If they are, just unmark
  89	 * them as waiting for connection, by clearing explicit_connect field.
  90	 */
  91	params->explicit_connect = false;
  92
  93	list_del_init(&params->action);
  94
  95	switch (params->auto_connect) {
  96	case HCI_AUTO_CONN_EXPLICIT:
  97		hci_conn_params_del(hdev, bdaddr, bdaddr_type);
  98		/* return instead of break to avoid duplicate scan update */
  99		return;
 100	case HCI_AUTO_CONN_DIRECT:
 101	case HCI_AUTO_CONN_ALWAYS:
 102		list_add(&params->action, &hdev->pend_le_conns);
 103		break;
 104	case HCI_AUTO_CONN_REPORT:
 105		list_add(&params->action, &hdev->pend_le_reports);
 106		break;
 107	default:
 108		break;
 109	}
 110
 111	hci_update_background_scan(hdev);
 112}
 113
 114static void hci_conn_cleanup(struct hci_conn *conn)
 115{
 116	struct hci_dev *hdev = conn->hdev;
 117
 118	if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
 119		hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
 120
 
 
 
 121	hci_chan_list_flush(conn);
 122
 123	hci_conn_hash_del(hdev, conn);
 124
 125	if (hdev->notify)
 126		hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
 127
 128	hci_conn_del_sysfs(conn);
 129
 130	debugfs_remove_recursive(conn->debugfs);
 131
 132	hci_dev_put(hdev);
 133
 134	hci_conn_put(conn);
 135}
 136
 137static void le_scan_cleanup(struct work_struct *work)
 138{
 139	struct hci_conn *conn = container_of(work, struct hci_conn,
 140					     le_scan_cleanup);
 141	struct hci_dev *hdev = conn->hdev;
 142	struct hci_conn *c = NULL;
 143
 144	BT_DBG("%s hcon %p", hdev->name, conn);
 145
 146	hci_dev_lock(hdev);
 147
 148	/* Check that the hci_conn is still around */
 149	rcu_read_lock();
 150	list_for_each_entry_rcu(c, &hdev->conn_hash.list, list) {
 151		if (c == conn)
 152			break;
 
 
 
 
 153	}
 154	rcu_read_unlock();
 155
 156	if (c == conn) {
 157		hci_connect_le_scan_cleanup(conn);
 158		hci_conn_cleanup(conn);
 159	}
 160
 161	hci_dev_unlock(hdev);
 162	hci_dev_put(hdev);
 163	hci_conn_put(conn);
 164}
 165
 166static void hci_connect_le_scan_remove(struct hci_conn *conn)
 167{
 168	BT_DBG("%s hcon %p", conn->hdev->name, conn);
 169
 170	/* We can't call hci_conn_del/hci_conn_cleanup here since that
 171	 * could deadlock with another hci_conn_del() call that's holding
 172	 * hci_dev_lock and doing cancel_delayed_work_sync(&conn->disc_work).
 173	 * Instead, grab temporary extra references to the hci_dev and
 174	 * hci_conn and perform the necessary cleanup in a separate work
 175	 * callback.
 176	 */
 
 
 
 
 177
 178	hci_dev_hold(conn->hdev);
 179	hci_conn_get(conn);
 
 
 180
 181	/* Even though we hold a reference to the hdev, many other
 182	 * things might get cleaned up meanwhile, including the hdev's
 183	 * own workqueue, so we can't use that for scheduling.
 184	 */
 185	schedule_work(&conn->le_scan_cleanup);
 186}
 187
 188static void hci_acl_create_connection(struct hci_conn *conn)
 189{
 190	struct hci_dev *hdev = conn->hdev;
 191	struct inquiry_entry *ie;
 192	struct hci_cp_create_conn cp;
 193
 194	BT_DBG("hcon %p", conn);
 195
 196	conn->state = BT_CONNECT;
 197	conn->out = true;
 198	conn->role = HCI_ROLE_MASTER;
 199
 200	conn->attempt++;
 201
 202	conn->link_policy = hdev->link_policy;
 
 203
 204	memset(&cp, 0, sizeof(cp));
 205	bacpy(&cp.bdaddr, &conn->dst);
 206	cp.pscan_rep_mode = 0x02;
 207
 208	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
 209	if (ie) {
 210		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
 211			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
 212			cp.pscan_mode     = ie->data.pscan_mode;
 213			cp.clock_offset   = ie->data.clock_offset |
 214					    cpu_to_le16(0x8000);
 215		}
 216
 217		memcpy(conn->dev_class, ie->data.dev_class, 3);
 218		if (ie->data.ssp_mode > 0)
 219			set_bit(HCI_CONN_SSP_ENABLED, &conn->flags);
 
 
 
 220	}
 221
 222	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 223	if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
 224		cp.role_switch = 0x01;
 225	else
 226		cp.role_switch = 0x00;
 227
 228	hci_send_cmd(hdev, HCI_OP_CREATE_CONN, sizeof(cp), &cp);
 229}
 230
 231int hci_disconnect(struct hci_conn *conn, __u8 reason)
 232{
 233	BT_DBG("hcon %p", conn);
 
 
 234
 235	/* When we are master of an established connection and it enters
 236	 * the disconnect timeout, then go ahead and try to read the
 237	 * current clock offset.  Processing of the result is done
 238	 * within the event handling and hci_clock_offset_evt function.
 239	 */
 240	if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
 241	    (conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
 242		struct hci_dev *hdev = conn->hdev;
 243		struct hci_cp_read_clock_offset clkoff_cp;
 244
 245		clkoff_cp.handle = cpu_to_le16(conn->handle);
 246		hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
 247			     &clkoff_cp);
 
 
 
 
 
 
 
 
 
 
 248	}
 249
 250	return hci_abort_conn(conn, reason);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 251}
 252
 253static void hci_add_sco(struct hci_conn *conn, __u16 handle)
 254{
 255	struct hci_dev *hdev = conn->hdev;
 256	struct hci_cp_add_sco cp;
 
 
 
 257
 258	BT_DBG("hcon %p", conn);
 
 
 
 
 259
 260	conn->state = BT_CONNECT;
 261	conn->out = true;
 262
 263	conn->attempt++;
 264
 
 
 265	cp.handle   = cpu_to_le16(handle);
 266	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 267
 268	hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 269}
 270
 271bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 272{
 273	struct hci_dev *hdev = conn->hdev;
 274	struct hci_cp_setup_sync_conn cp;
 275	const struct sco_param *param;
 276
 277	BT_DBG("hcon %p", conn);
 278
 279	conn->state = BT_CONNECT;
 280	conn->out = true;
 281
 282	conn->attempt++;
 283
 284	cp.handle   = cpu_to_le16(handle);
 285
 286	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 287	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 288	cp.voice_setting  = cpu_to_le16(conn->setting);
 289
 290	switch (conn->setting & SCO_AIRMODE_MASK) {
 291	case SCO_AIRMODE_TRANSP:
 292		if (conn->attempt > ARRAY_SIZE(esco_param_msbc))
 
 293			return false;
 294		param = &esco_param_msbc[conn->attempt - 1];
 295		break;
 296	case SCO_AIRMODE_CVSD:
 297		if (lmp_esco_capable(conn->link)) {
 298			if (conn->attempt > ARRAY_SIZE(esco_param_cvsd))
 
 299				return false;
 300			param = &esco_param_cvsd[conn->attempt - 1];
 301		} else {
 302			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 303				return false;
 304			param = &sco_param_cvsd[conn->attempt - 1];
 305		}
 306		break;
 307	default:
 308		return false;
 309	}
 310
 311	cp.retrans_effort = param->retrans_effort;
 312	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 313	cp.max_latency = __cpu_to_le16(param->max_latency);
 314
 315	if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 316		return false;
 317
 318	return true;
 319}
 320
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 321u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
 322		      u16 to_multiplier)
 323{
 324	struct hci_dev *hdev = conn->hdev;
 325	struct hci_conn_params *params;
 326	struct hci_cp_le_conn_update cp;
 327
 328	hci_dev_lock(hdev);
 329
 330	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 331	if (params) {
 332		params->conn_min_interval = min;
 333		params->conn_max_interval = max;
 334		params->conn_latency = latency;
 335		params->supervision_timeout = to_multiplier;
 336	}
 337
 338	hci_dev_unlock(hdev);
 339
 340	memset(&cp, 0, sizeof(cp));
 341	cp.handle		= cpu_to_le16(conn->handle);
 342	cp.conn_interval_min	= cpu_to_le16(min);
 343	cp.conn_interval_max	= cpu_to_le16(max);
 344	cp.conn_latency		= cpu_to_le16(latency);
 345	cp.supervision_timeout	= cpu_to_le16(to_multiplier);
 346	cp.min_ce_len		= cpu_to_le16(0x0000);
 347	cp.max_ce_len		= cpu_to_le16(0x0000);
 348
 349	hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
 350
 351	if (params)
 352		return 0x01;
 353
 354	return 0x00;
 355}
 356
 357void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
 358		      __u8 ltk[16], __u8 key_size)
 359{
 360	struct hci_dev *hdev = conn->hdev;
 361	struct hci_cp_le_start_enc cp;
 362
 363	BT_DBG("hcon %p", conn);
 364
 365	memset(&cp, 0, sizeof(cp));
 366
 367	cp.handle = cpu_to_le16(conn->handle);
 368	cp.rand = rand;
 369	cp.ediv = ediv;
 370	memcpy(cp.ltk, ltk, key_size);
 371
 372	hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
 373}
 374
 375/* Device _must_ be locked */
 376void hci_sco_setup(struct hci_conn *conn, __u8 status)
 377{
 378	struct hci_conn *sco = conn->link;
 379
 380	if (!sco)
 
 381		return;
 382
 383	BT_DBG("hcon %p", conn);
 384
 385	if (!status) {
 386		if (lmp_esco_capable(conn->hdev))
 387			hci_setup_sync(sco, conn->handle);
 388		else
 389			hci_add_sco(sco, conn->handle);
 390	} else {
 391		hci_connect_cfm(sco, status);
 392		hci_conn_del(sco);
 393	}
 394}
 395
 396static void hci_conn_timeout(struct work_struct *work)
 397{
 398	struct hci_conn *conn = container_of(work, struct hci_conn,
 399					     disc_work.work);
 400	int refcnt = atomic_read(&conn->refcnt);
 401
 402	BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 403
 404	WARN_ON(refcnt < 0);
 405
 406	/* FIXME: It was observed that in pairing failed scenario, refcnt
 407	 * drops below 0. Probably this is because l2cap_conn_del calls
 408	 * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
 409	 * dropped. After that loop hci_chan_del is called which also drops
 410	 * conn. For now make sure that ACL is alive if refcnt is higher then 0,
 411	 * otherwise drop it.
 412	 */
 413	if (refcnt > 0)
 414		return;
 415
 416	/* LE connections in scanning state need special handling */
 417	if (conn->state == BT_CONNECT && conn->type == LE_LINK &&
 418	    test_bit(HCI_CONN_SCANNING, &conn->flags)) {
 419		hci_connect_le_scan_remove(conn);
 420		return;
 421	}
 422
 423	hci_abort_conn(conn, hci_proto_disconn_ind(conn));
 424}
 425
 426/* Enter sniff mode */
 427static void hci_conn_idle(struct work_struct *work)
 428{
 429	struct hci_conn *conn = container_of(work, struct hci_conn,
 430					     idle_work.work);
 431	struct hci_dev *hdev = conn->hdev;
 432
 433	BT_DBG("hcon %p mode %d", conn, conn->mode);
 434
 435	if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
 436		return;
 437
 438	if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
 439		return;
 440
 441	if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
 442		struct hci_cp_sniff_subrate cp;
 443		cp.handle             = cpu_to_le16(conn->handle);
 444		cp.max_latency        = cpu_to_le16(0);
 445		cp.min_remote_timeout = cpu_to_le16(0);
 446		cp.min_local_timeout  = cpu_to_le16(0);
 447		hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
 448	}
 449
 450	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
 451		struct hci_cp_sniff_mode cp;
 452		cp.handle       = cpu_to_le16(conn->handle);
 453		cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
 454		cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
 455		cp.attempt      = cpu_to_le16(4);
 456		cp.timeout      = cpu_to_le16(1);
 457		hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
 458	}
 459}
 460
 461static void hci_conn_auto_accept(struct work_struct *work)
 462{
 463	struct hci_conn *conn = container_of(work, struct hci_conn,
 464					     auto_accept_work.work);
 465
 466	hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
 467		     &conn->dst);
 468}
 469
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 470static void le_conn_timeout(struct work_struct *work)
 471{
 472	struct hci_conn *conn = container_of(work, struct hci_conn,
 473					     le_conn_timeout.work);
 474	struct hci_dev *hdev = conn->hdev;
 475
 476	BT_DBG("");
 477
 478	/* We could end up here due to having done directed advertising,
 479	 * so clean up the state if necessary. This should however only
 480	 * happen with broken hardware or if low duty cycle was used
 481	 * (which doesn't have a timeout of its own).
 482	 */
 483	if (conn->role == HCI_ROLE_SLAVE) {
 484		u8 enable = 0x00;
 485		hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 486			     &enable);
 487		hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
 
 488		return;
 489	}
 490
 491	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 492}
 493
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 494struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 495			      u8 role)
 496{
 497	struct hci_conn *conn;
 498
 499	BT_DBG("%s dst %pMR", hdev->name, dst);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 500
 501	conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 502	if (!conn)
 503		return NULL;
 504
 505	bacpy(&conn->dst, dst);
 506	bacpy(&conn->src, &hdev->bdaddr);
 
 507	conn->hdev  = hdev;
 508	conn->type  = type;
 509	conn->role  = role;
 510	conn->mode  = HCI_CM_ACTIVE;
 511	conn->state = BT_OPEN;
 512	conn->auth_type = HCI_AT_GENERAL_BONDING;
 513	conn->io_capability = hdev->io_capability;
 514	conn->remote_auth = 0xff;
 515	conn->key_type = 0xff;
 516	conn->rssi = HCI_RSSI_INVALID;
 517	conn->tx_power = HCI_TX_POWER_INVALID;
 518	conn->max_tx_power = HCI_TX_POWER_INVALID;
 
 519
 520	set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
 521	conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 522
 
 
 
 523	if (conn->role == HCI_ROLE_MASTER)
 524		conn->out = true;
 525
 526	switch (type) {
 527	case ACL_LINK:
 528		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 
 529		break;
 530	case LE_LINK:
 531		/* conn->src should reflect the local identity address */
 532		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 533		break;
 534	case SCO_LINK:
 535		if (lmp_esco_capable(hdev))
 536			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
 537					(hdev->esco_type & EDR_ESCO_MASK);
 538		else
 539			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
 
 
 540		break;
 541	case ESCO_LINK:
 542		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
 
 543		break;
 544	}
 545
 546	skb_queue_head_init(&conn->data_q);
 547
 548	INIT_LIST_HEAD(&conn->chan_list);
 
 549
 550	INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
 551	INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
 552	INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
 553	INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
 554	INIT_WORK(&conn->le_scan_cleanup, le_scan_cleanup);
 555
 556	atomic_set(&conn->refcnt, 0);
 557
 558	hci_dev_hold(hdev);
 559
 560	hci_conn_hash_add(hdev, conn);
 561	if (hdev->notify)
 562		hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
 
 
 
 
 
 
 
 563
 564	hci_conn_init_sysfs(conn);
 565
 566	return conn;
 567}
 568
 569int hci_conn_del(struct hci_conn *conn)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 570{
 571	struct hci_dev *hdev = conn->hdev;
 572
 573	BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
 574
 
 
 575	cancel_delayed_work_sync(&conn->disc_work);
 576	cancel_delayed_work_sync(&conn->auto_accept_work);
 577	cancel_delayed_work_sync(&conn->idle_work);
 578
 579	if (conn->type == ACL_LINK) {
 580		struct hci_conn *sco = conn->link;
 581		if (sco)
 582			sco->link = NULL;
 583
 584		/* Unacked frames */
 585		hdev->acl_cnt += conn->sent;
 586	} else if (conn->type == LE_LINK) {
 587		cancel_delayed_work(&conn->le_conn_timeout);
 588
 589		if (hdev->le_pkts)
 590			hdev->le_cnt += conn->sent;
 591		else
 592			hdev->acl_cnt += conn->sent;
 593	} else {
 594		struct hci_conn *acl = conn->link;
 595		if (acl) {
 596			acl->link = NULL;
 597			hci_conn_drop(acl);
 
 
 
 
 598		}
 599	}
 600
 601	if (conn->amp_mgr)
 602		amp_mgr_put(conn->amp_mgr);
 603
 604	skb_queue_purge(&conn->data_q);
 605
 606	/* Remove the connection from the list and cleanup its remaining
 607	 * state. This is a separate function since for some cases like
 608	 * BT_CONNECT_SCAN we *only* want the cleanup part without the
 609	 * rest of hci_conn_del.
 610	 */
 611	hci_conn_cleanup(conn);
 612
 613	return 0;
 
 614}
 615
 616struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src)
 617{
 618	int use_src = bacmp(src, BDADDR_ANY);
 619	struct hci_dev *hdev = NULL, *d;
 620
 621	BT_DBG("%pMR -> %pMR", src, dst);
 622
 623	read_lock(&hci_dev_list_lock);
 624
 625	list_for_each_entry(d, &hci_dev_list, list) {
 626		if (!test_bit(HCI_UP, &d->flags) ||
 627		    hci_dev_test_flag(d, HCI_USER_CHANNEL) ||
 628		    d->dev_type != HCI_BREDR)
 629			continue;
 630
 631		/* Simple routing:
 632		 *   No source address - find interface with bdaddr != dst
 633		 *   Source address    - find interface with bdaddr == src
 634		 */
 635
 636		if (use_src) {
 637			if (!bacmp(&d->bdaddr, src)) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 638				hdev = d; break;
 639			}
 640		} else {
 641			if (bacmp(&d->bdaddr, dst)) {
 642				hdev = d; break;
 643			}
 644		}
 645	}
 646
 647	if (hdev)
 648		hdev = hci_dev_hold(hdev);
 649
 650	read_unlock(&hci_dev_list_lock);
 651	return hdev;
 652}
 653EXPORT_SYMBOL(hci_get_route);
 654
 655/* This function requires the caller holds hdev->lock */
 656void hci_le_conn_failed(struct hci_conn *conn, u8 status)
 657{
 658	struct hci_dev *hdev = conn->hdev;
 659	struct hci_conn_params *params;
 660
 661	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
 662					   conn->dst_type);
 663	if (params && params->conn) {
 664		hci_conn_drop(params->conn);
 665		hci_conn_put(params->conn);
 666		params->conn = NULL;
 667	}
 668
 669	conn->state = BT_CLOSED;
 670
 671	/* If the status indicates successful cancellation of
 672	 * the attempt (i.e. Unkown Connection Id) there's no point of
 673	 * notifying failure since we'll go back to keep trying to
 674	 * connect. The only exception is explicit connect requests
 675	 * where a timeout + cancel does indicate an actual failure.
 676	 */
 677	if (status != HCI_ERROR_UNKNOWN_CONN_ID ||
 678	    (params && params->explicit_connect))
 679		mgmt_connect_failed(hdev, &conn->dst, conn->type,
 680				    conn->dst_type, status);
 681
 682	hci_connect_cfm(conn, status);
 683
 684	hci_conn_del(conn);
 685
 686	/* Since we may have temporarily stopped the background scanning in
 687	 * favor of connection establishment, we should restart it.
 688	 */
 689	hci_update_background_scan(hdev);
 690
 691	/* Re-enable advertising in case this was a failed connection
 692	 * attempt as a peripheral.
 693	 */
 694	hci_req_reenable_advertising(hdev);
 695}
 696
 697static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
 
 698{
 699	struct hci_conn *conn;
 700
 701	hci_dev_lock(hdev);
 702
 703	conn = hci_lookup_le_connect(hdev);
 704
 705	if (!status) {
 706		hci_connect_le_scan_cleanup(conn);
 707		goto done;
 
 
 
 
 
 708	}
 709
 710	BT_ERR("HCI request failed to create LE connection: status 0x%2.2x",
 711	       status);
 712
 713	if (!conn)
 714		goto done;
 715
 716	hci_le_conn_failed(conn, status);
 717
 718done:
 719	hci_dev_unlock(hdev);
 720}
 721
 722static bool conn_use_rpa(struct hci_conn *conn)
 723{
 724	struct hci_dev *hdev = conn->hdev;
 725
 726	return hci_dev_test_flag(hdev, HCI_PRIVACY);
 
 
 727}
 728
 729static void hci_req_add_le_create_conn(struct hci_request *req,
 730				       struct hci_conn *conn)
 731{
 732	struct hci_cp_le_create_conn cp;
 733	struct hci_dev *hdev = conn->hdev;
 734	u8 own_addr_type;
 735
 736	/* Update random address, but set require_privacy to false so
 737	 * that we never connect with an non-resolvable address.
 738	 */
 739	if (hci_update_random_address(req, false, conn_use_rpa(conn),
 740				      &own_addr_type))
 741		return;
 742
 743	memset(&cp, 0, sizeof(cp));
 744
 745	/* Set window to be the same value as the interval to enable
 746	 * continuous scanning.
 747	 */
 748	cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
 749	cp.scan_window = cp.scan_interval;
 750
 751	bacpy(&cp.peer_addr, &conn->dst);
 752	cp.peer_addr_type = conn->dst_type;
 753	cp.own_address_type = own_addr_type;
 754	cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
 755	cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
 756	cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
 757	cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
 758	cp.min_ce_len = cpu_to_le16(0x0000);
 759	cp.max_ce_len = cpu_to_le16(0x0000);
 760
 761	hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
 762
 763	conn->state = BT_CONNECT;
 764	clear_bit(HCI_CONN_SCANNING, &conn->flags);
 765}
 766
 767static void hci_req_directed_advertising(struct hci_request *req,
 768					 struct hci_conn *conn)
 769{
 770	struct hci_dev *hdev = req->hdev;
 771	struct hci_cp_le_set_adv_param cp;
 772	u8 own_addr_type;
 773	u8 enable;
 774
 775	/* Clear the HCI_LE_ADV bit temporarily so that the
 776	 * hci_update_random_address knows that it's safe to go ahead
 777	 * and write a new random address. The flag will be set back on
 778	 * as soon as the SET_ADV_ENABLE HCI command completes.
 779	 */
 780	hci_dev_clear_flag(hdev, HCI_LE_ADV);
 781
 782	/* Set require_privacy to false so that the remote device has a
 783	 * chance of identifying us.
 784	 */
 785	if (hci_update_random_address(req, false, conn_use_rpa(conn),
 786				      &own_addr_type) < 0)
 787		return;
 788
 789	memset(&cp, 0, sizeof(cp));
 790	cp.type = LE_ADV_DIRECT_IND;
 791	cp.own_address_type = own_addr_type;
 792	cp.direct_addr_type = conn->dst_type;
 793	bacpy(&cp.direct_addr, &conn->dst);
 794	cp.channel_map = hdev->le_adv_channel_map;
 795
 796	hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
 797
 798	enable = 0x01;
 799	hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
 800
 801	conn->state = BT_CONNECT;
 802}
 803
 804struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 805				u8 dst_type, u8 sec_level, u16 conn_timeout,
 806				u8 role)
 807{
 808	struct hci_conn_params *params;
 809	struct hci_conn *conn;
 810	struct smp_irk *irk;
 811	struct hci_request req;
 812	int err;
 813
 814	/* Let's make sure that le is enabled.*/
 815	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
 816		if (lmp_le_capable(hdev))
 817			return ERR_PTR(-ECONNREFUSED);
 818
 819		return ERR_PTR(-EOPNOTSUPP);
 820	}
 821
 822	/* Since the controller supports only one LE connection attempt at a
 823	 * time, we return -EBUSY if there is any connection attempt running.
 824	 */
 825	if (hci_lookup_le_connect(hdev))
 826		return ERR_PTR(-EBUSY);
 827
 828	/* If there's already a connection object but it's not in
 829	 * scanning state it means it must already be established, in
 830	 * which case we can't do anything else except report a failure
 831	 * to connect.
 832	 */
 833	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
 834	if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
 835		return ERR_PTR(-EBUSY);
 836	}
 837
 838	/* When given an identity address with existing identity
 839	 * resolving key, the connection needs to be established
 840	 * to a resolvable random address.
 841	 *
 842	 * Storing the resolvable random address is required here
 843	 * to handle connection failures. The address will later
 844	 * be resolved back into the original identity address
 845	 * from the connect request.
 846	 */
 847	irk = hci_find_irk_by_addr(hdev, dst, dst_type);
 848	if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
 849		dst = &irk->rpa;
 850		dst_type = ADDR_LE_DEV_RANDOM;
 
 
 
 
 
 851	}
 852
 853	if (conn) {
 854		bacpy(&conn->dst, dst);
 855	} else {
 856		conn = hci_conn_add(hdev, LE_LINK, dst, role);
 857		if (!conn)
 858			return ERR_PTR(-ENOMEM);
 859		hci_conn_hold(conn);
 860		conn->pending_sec_level = sec_level;
 861	}
 862
 863	conn->dst_type = dst_type;
 864	conn->sec_level = BT_SECURITY_LOW;
 865	conn->conn_timeout = conn_timeout;
 
 
 866
 867	hci_req_init(&req, hdev);
 868
 869	/* Disable advertising if we're active. For master role
 870	 * connections most controllers will refuse to connect if
 871	 * advertising is enabled, and for slave role connections we
 872	 * anyway have to disable it in order to start directed
 873	 * advertising.
 874	 */
 875	if (hci_dev_test_flag(hdev, HCI_LE_ADV)) {
 876		u8 enable = 0x00;
 877		hci_req_add(&req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 878			    &enable);
 879	}
 880
 881	/* If requested to connect as slave use directed advertising */
 882	if (conn->role == HCI_ROLE_SLAVE) {
 883		/* If we're active scanning most controllers are unable
 884		 * to initiate advertising. Simply reject the attempt.
 885		 */
 886		if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
 887		    hdev->le_scan_type == LE_SCAN_ACTIVE) {
 888			skb_queue_purge(&req.cmd_q);
 889			hci_conn_del(conn);
 890			return ERR_PTR(-EBUSY);
 891		}
 892
 893		hci_req_directed_advertising(&req, conn);
 894		goto create_conn;
 895	}
 896
 897	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 898	if (params) {
 899		conn->le_conn_min_interval = params->conn_min_interval;
 900		conn->le_conn_max_interval = params->conn_max_interval;
 901		conn->le_conn_latency = params->conn_latency;
 902		conn->le_supv_timeout = params->supervision_timeout;
 903	} else {
 904		conn->le_conn_min_interval = hdev->le_conn_min_interval;
 905		conn->le_conn_max_interval = hdev->le_conn_max_interval;
 906		conn->le_conn_latency = hdev->le_conn_latency;
 907		conn->le_supv_timeout = hdev->le_supv_timeout;
 908	}
 909
 910	/* If controller is scanning, we stop it since some controllers are
 911	 * not able to scan and connect at the same time. Also set the
 912	 * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
 913	 * handler for scan disabling knows to set the correct discovery
 914	 * state.
 915	 */
 916	if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
 917		hci_req_add_le_scan_disable(&req);
 918		hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
 919	}
 920
 921	hci_req_add_le_create_conn(&req, conn);
 922
 923create_conn:
 924	err = hci_req_run(&req, create_le_conn_complete);
 925	if (err) {
 926		hci_conn_del(conn);
 927		return ERR_PTR(err);
 928	}
 929
 930	return conn;
 931}
 932
 933static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
 934{
 935	struct hci_conn *conn;
 936
 937	conn = hci_conn_hash_lookup_le(hdev, addr, type);
 938	if (!conn)
 939		return false;
 940
 941	if (conn->state != BT_CONNECTED)
 942		return false;
 943
 944	return true;
 945}
 946
 947/* This function requires the caller holds hdev->lock */
 948static int hci_explicit_conn_params_set(struct hci_dev *hdev,
 949					bdaddr_t *addr, u8 addr_type)
 950{
 951	struct hci_conn_params *params;
 952
 953	if (is_connected(hdev, addr, addr_type))
 954		return -EISCONN;
 955
 956	params = hci_conn_params_lookup(hdev, addr, addr_type);
 957	if (!params) {
 958		params = hci_conn_params_add(hdev, addr, addr_type);
 959		if (!params)
 960			return -ENOMEM;
 961
 962		/* If we created new params, mark them to be deleted in
 963		 * hci_connect_le_scan_cleanup. It's different case than
 964		 * existing disabled params, those will stay after cleanup.
 965		 */
 966		params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
 967	}
 968
 969	/* We're trying to connect, so make sure params are at pend_le_conns */
 970	if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
 971	    params->auto_connect == HCI_AUTO_CONN_REPORT ||
 972	    params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
 973		list_del_init(&params->action);
 974		list_add(&params->action, &hdev->pend_le_conns);
 975	}
 976
 977	params->explicit_connect = true;
 978
 979	BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
 980	       params->auto_connect);
 981
 982	return 0;
 983}
 984
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 985/* This function requires the caller holds hdev->lock */
 986struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
 987				     u8 dst_type, u8 sec_level,
 988				     u16 conn_timeout)
 
 989{
 990	struct hci_conn *conn;
 991
 992	/* Let's make sure that le is enabled.*/
 993	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
 994		if (lmp_le_capable(hdev))
 995			return ERR_PTR(-ECONNREFUSED);
 996
 997		return ERR_PTR(-EOPNOTSUPP);
 998	}
 999
1000	/* Some devices send ATT messages as soon as the physical link is
1001	 * established. To be able to handle these ATT messages, the user-
1002	 * space first establishes the connection and then starts the pairing
1003	 * process.
1004	 *
1005	 * So if a hci_conn object already exists for the following connection
1006	 * attempt, we simply update pending_sec_level and auth_type fields
1007	 * and return the object found.
1008	 */
1009	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1010	if (conn) {
1011		if (conn->pending_sec_level < sec_level)
1012			conn->pending_sec_level = sec_level;
1013		goto done;
1014	}
1015
1016	BT_DBG("requesting refresh of dst_addr");
1017
1018	conn = hci_conn_add(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
1019	if (!conn)
1020		return ERR_PTR(-ENOMEM);
1021
1022	if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0)
 
1023		return ERR_PTR(-EBUSY);
 
1024
1025	conn->state = BT_CONNECT;
1026	set_bit(HCI_CONN_SCANNING, &conn->flags);
1027	conn->dst_type = dst_type;
1028	conn->sec_level = BT_SECURITY_LOW;
1029	conn->pending_sec_level = sec_level;
1030	conn->conn_timeout = conn_timeout;
 
1031
1032	hci_update_background_scan(hdev);
1033
1034done:
1035	hci_conn_hold(conn);
1036	return conn;
1037}
1038
1039struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
1040				 u8 sec_level, u8 auth_type)
 
1041{
1042	struct hci_conn *acl;
1043
1044	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
1045		if (lmp_bredr_capable(hdev))
1046			return ERR_PTR(-ECONNREFUSED);
1047
1048		return ERR_PTR(-EOPNOTSUPP);
1049	}
1050
 
 
 
 
 
 
 
 
 
1051	acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
1052	if (!acl) {
1053		acl = hci_conn_add(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
1054		if (!acl)
1055			return ERR_PTR(-ENOMEM);
1056	}
1057
1058	hci_conn_hold(acl);
1059
 
1060	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
 
 
1061		acl->sec_level = BT_SECURITY_LOW;
1062		acl->pending_sec_level = sec_level;
1063		acl->auth_type = auth_type;
1064		hci_acl_create_connection(acl);
 
 
 
 
 
 
1065	}
1066
1067	return acl;
1068}
1069
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1070struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
1071				 __u16 setting)
 
1072{
1073	struct hci_conn *acl;
1074	struct hci_conn *sco;
 
1075
1076	acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
 
1077	if (IS_ERR(acl))
1078		return acl;
1079
1080	sco = hci_conn_hash_lookup_ba(hdev, type, dst);
1081	if (!sco) {
1082		sco = hci_conn_add(hdev, type, dst, HCI_ROLE_MASTER);
1083		if (!sco) {
1084			hci_conn_drop(acl);
1085			return ERR_PTR(-ENOMEM);
1086		}
1087	}
1088
1089	acl->link = sco;
1090	sco->link = acl;
1091
1092	hci_conn_hold(sco);
 
 
1093
1094	sco->setting = setting;
 
1095
1096	if (acl->state == BT_CONNECTED &&
1097	    (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
1098		set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
1099		hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
1100
1101		if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
1102			/* defer SCO setup until mode change completed */
1103			set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
1104			return sco;
1105		}
1106
1107		hci_sco_setup(acl, 0x00);
1108	}
1109
1110	return sco;
1111}
1112
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1113/* Check link security requirement */
1114int hci_conn_check_link_mode(struct hci_conn *conn)
1115{
1116	BT_DBG("hcon %p", conn);
1117
1118	/* In Secure Connections Only mode, it is required that Secure
1119	 * Connections is used and the link is encrypted with AES-CCM
1120	 * using a P-256 authenticated combination key.
1121	 */
1122	if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
1123		if (!hci_conn_sc_enabled(conn) ||
1124		    !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
1125		    conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
1126			return 0;
1127	}
1128
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1129	if (hci_conn_ssp_enabled(conn) &&
1130	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1131		return 0;
1132
1133	return 1;
1134}
1135
1136/* Authenticate remote device */
1137static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
1138{
1139	BT_DBG("hcon %p", conn);
1140
1141	if (conn->pending_sec_level > sec_level)
1142		sec_level = conn->pending_sec_level;
1143
1144	if (sec_level > conn->sec_level)
1145		conn->pending_sec_level = sec_level;
1146	else if (test_bit(HCI_CONN_AUTH, &conn->flags))
1147		return 1;
1148
1149	/* Make sure we preserve an existing MITM requirement*/
1150	auth_type |= (conn->auth_type & 0x01);
1151
1152	conn->auth_type = auth_type;
1153
1154	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
1155		struct hci_cp_auth_requested cp;
1156
1157		cp.handle = cpu_to_le16(conn->handle);
1158		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
1159			     sizeof(cp), &cp);
1160
1161		/* If we're already encrypted set the REAUTH_PEND flag,
1162		 * otherwise set the ENCRYPT_PEND.
1163		 */
1164		if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1165			set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
1166		else
1167			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
1168	}
1169
1170	return 0;
1171}
1172
1173/* Encrypt the the link */
1174static void hci_conn_encrypt(struct hci_conn *conn)
1175{
1176	BT_DBG("hcon %p", conn);
1177
1178	if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
1179		struct hci_cp_set_conn_encrypt cp;
1180		cp.handle  = cpu_to_le16(conn->handle);
1181		cp.encrypt = 0x01;
1182		hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
1183			     &cp);
1184	}
1185}
1186
1187/* Enable security */
1188int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
1189		      bool initiator)
1190{
1191	BT_DBG("hcon %p", conn);
1192
1193	if (conn->type == LE_LINK)
1194		return smp_conn_security(conn, sec_level);
1195
1196	/* For sdp we don't need the link key. */
1197	if (sec_level == BT_SECURITY_SDP)
1198		return 1;
1199
1200	/* For non 2.1 devices and low security level we don't need the link
1201	   key. */
1202	if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
1203		return 1;
1204
1205	/* For other security levels we need the link key. */
1206	if (!test_bit(HCI_CONN_AUTH, &conn->flags))
1207		goto auth;
1208
1209	/* An authenticated FIPS approved combination key has sufficient
1210	 * security for security level 4. */
1211	if (conn->key_type == HCI_LK_AUTH_COMBINATION_P256 &&
1212	    sec_level == BT_SECURITY_FIPS)
1213		goto encrypt;
1214
1215	/* An authenticated combination key has sufficient security for
1216	   security level 3. */
1217	if ((conn->key_type == HCI_LK_AUTH_COMBINATION_P192 ||
1218	     conn->key_type == HCI_LK_AUTH_COMBINATION_P256) &&
1219	    sec_level == BT_SECURITY_HIGH)
1220		goto encrypt;
1221
1222	/* An unauthenticated combination key has sufficient security for
1223	   security level 1 and 2. */
1224	if ((conn->key_type == HCI_LK_UNAUTH_COMBINATION_P192 ||
1225	     conn->key_type == HCI_LK_UNAUTH_COMBINATION_P256) &&
1226	    (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW))
1227		goto encrypt;
1228
1229	/* A combination key has always sufficient security for the security
1230	   levels 1 or 2. High security level requires the combination key
1231	   is generated using maximum PIN code length (16).
1232	   For pre 2.1 units. */
1233	if (conn->key_type == HCI_LK_COMBINATION &&
1234	    (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW ||
1235	     conn->pin_length == 16))
1236		goto encrypt;
 
 
 
 
 
 
 
1237
1238auth:
1239	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
1240		return 0;
1241
1242	if (initiator)
1243		set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
1244
1245	if (!hci_conn_auth(conn, sec_level, auth_type))
1246		return 0;
1247
1248encrypt:
1249	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 
 
 
 
 
 
 
1250		return 1;
 
1251
1252	hci_conn_encrypt(conn);
1253	return 0;
1254}
1255EXPORT_SYMBOL(hci_conn_security);
1256
1257/* Check secure link requirement */
1258int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
1259{
1260	BT_DBG("hcon %p", conn);
1261
1262	/* Accept if non-secure or higher security level is required */
1263	if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
1264		return 1;
1265
1266	/* Accept if secure or higher security level is already present */
1267	if (conn->sec_level == BT_SECURITY_HIGH ||
1268	    conn->sec_level == BT_SECURITY_FIPS)
1269		return 1;
1270
1271	/* Reject not secure link */
1272	return 0;
1273}
1274EXPORT_SYMBOL(hci_conn_check_secure);
1275
1276/* Switch role */
1277int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
1278{
1279	BT_DBG("hcon %p", conn);
1280
1281	if (role == conn->role)
1282		return 1;
1283
1284	if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
1285		struct hci_cp_switch_role cp;
1286		bacpy(&cp.bdaddr, &conn->dst);
1287		cp.role = role;
1288		hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
1289	}
1290
1291	return 0;
1292}
1293EXPORT_SYMBOL(hci_conn_switch_role);
1294
1295/* Enter active mode */
1296void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
1297{
1298	struct hci_dev *hdev = conn->hdev;
1299
1300	BT_DBG("hcon %p mode %d", conn, conn->mode);
1301
1302	if (conn->mode != HCI_CM_SNIFF)
1303		goto timer;
1304
1305	if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
1306		goto timer;
1307
1308	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
1309		struct hci_cp_exit_sniff_mode cp;
1310		cp.handle = cpu_to_le16(conn->handle);
1311		hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
1312	}
1313
1314timer:
1315	if (hdev->idle_timeout > 0)
1316		queue_delayed_work(hdev->workqueue, &conn->idle_work,
1317				   msecs_to_jiffies(hdev->idle_timeout));
1318}
1319
1320/* Drop all connection on the device */
1321void hci_conn_hash_flush(struct hci_dev *hdev)
1322{
1323	struct hci_conn_hash *h = &hdev->conn_hash;
1324	struct hci_conn *c, *n;
1325
1326	BT_DBG("hdev %s", hdev->name);
1327
1328	list_for_each_entry_safe(c, n, &h->list, list) {
1329		c->state = BT_CLOSED;
1330
1331		hci_disconn_cfm(c, HCI_ERROR_LOCAL_HOST_TERM);
1332		hci_conn_del(c);
1333	}
1334}
1335
1336/* Check pending connect attempts */
1337void hci_conn_check_pending(struct hci_dev *hdev)
1338{
1339	struct hci_conn *conn;
1340
1341	BT_DBG("hdev %s", hdev->name);
1342
1343	hci_dev_lock(hdev);
1344
1345	conn = hci_conn_hash_lookup_state(hdev, ACL_LINK, BT_CONNECT2);
1346	if (conn)
1347		hci_acl_create_connection(conn);
1348
1349	hci_dev_unlock(hdev);
 
 
 
 
1350}
1351
1352static u32 get_link_mode(struct hci_conn *conn)
1353{
1354	u32 link_mode = 0;
1355
1356	if (conn->role == HCI_ROLE_MASTER)
1357		link_mode |= HCI_LM_MASTER;
1358
1359	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1360		link_mode |= HCI_LM_ENCRYPT;
1361
1362	if (test_bit(HCI_CONN_AUTH, &conn->flags))
1363		link_mode |= HCI_LM_AUTH;
1364
1365	if (test_bit(HCI_CONN_SECURE, &conn->flags))
1366		link_mode |= HCI_LM_SECURE;
1367
1368	if (test_bit(HCI_CONN_FIPS, &conn->flags))
1369		link_mode |= HCI_LM_FIPS;
1370
1371	return link_mode;
1372}
1373
1374int hci_get_conn_list(void __user *arg)
1375{
1376	struct hci_conn *c;
1377	struct hci_conn_list_req req, *cl;
1378	struct hci_conn_info *ci;
1379	struct hci_dev *hdev;
1380	int n = 0, size, err;
1381
1382	if (copy_from_user(&req, arg, sizeof(req)))
1383		return -EFAULT;
1384
1385	if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
1386		return -EINVAL;
1387
1388	size = sizeof(req) + req.conn_num * sizeof(*ci);
1389
1390	cl = kmalloc(size, GFP_KERNEL);
1391	if (!cl)
1392		return -ENOMEM;
1393
1394	hdev = hci_dev_get(req.dev_id);
1395	if (!hdev) {
1396		kfree(cl);
1397		return -ENODEV;
1398	}
1399
1400	ci = cl->conn_info;
1401
1402	hci_dev_lock(hdev);
1403	list_for_each_entry(c, &hdev->conn_hash.list, list) {
1404		bacpy(&(ci + n)->bdaddr, &c->dst);
1405		(ci + n)->handle = c->handle;
1406		(ci + n)->type  = c->type;
1407		(ci + n)->out   = c->out;
1408		(ci + n)->state = c->state;
1409		(ci + n)->link_mode = get_link_mode(c);
1410		if (++n >= req.conn_num)
1411			break;
1412	}
1413	hci_dev_unlock(hdev);
1414
1415	cl->dev_id = hdev->id;
1416	cl->conn_num = n;
1417	size = sizeof(req) + n * sizeof(*ci);
1418
1419	hci_dev_put(hdev);
1420
1421	err = copy_to_user(arg, cl, size);
1422	kfree(cl);
1423
1424	return err ? -EFAULT : 0;
1425}
1426
1427int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
1428{
1429	struct hci_conn_info_req req;
1430	struct hci_conn_info ci;
1431	struct hci_conn *conn;
1432	char __user *ptr = arg + sizeof(req);
1433
1434	if (copy_from_user(&req, arg, sizeof(req)))
1435		return -EFAULT;
1436
1437	hci_dev_lock(hdev);
1438	conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
1439	if (conn) {
1440		bacpy(&ci.bdaddr, &conn->dst);
1441		ci.handle = conn->handle;
1442		ci.type  = conn->type;
1443		ci.out   = conn->out;
1444		ci.state = conn->state;
1445		ci.link_mode = get_link_mode(conn);
1446	}
1447	hci_dev_unlock(hdev);
1448
1449	if (!conn)
1450		return -ENOENT;
1451
1452	return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
1453}
1454
1455int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
1456{
1457	struct hci_auth_info_req req;
1458	struct hci_conn *conn;
1459
1460	if (copy_from_user(&req, arg, sizeof(req)))
1461		return -EFAULT;
1462
1463	hci_dev_lock(hdev);
1464	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
1465	if (conn)
1466		req.type = conn->auth_type;
1467	hci_dev_unlock(hdev);
1468
1469	if (!conn)
1470		return -ENOENT;
1471
1472	return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
1473}
1474
1475struct hci_chan *hci_chan_create(struct hci_conn *conn)
1476{
1477	struct hci_dev *hdev = conn->hdev;
1478	struct hci_chan *chan;
1479
1480	BT_DBG("%s hcon %p", hdev->name, conn);
1481
1482	if (test_bit(HCI_CONN_DROP, &conn->flags)) {
1483		BT_DBG("Refusing to create new hci_chan");
1484		return NULL;
1485	}
1486
1487	chan = kzalloc(sizeof(*chan), GFP_KERNEL);
1488	if (!chan)
1489		return NULL;
1490
1491	chan->conn = hci_conn_get(conn);
1492	skb_queue_head_init(&chan->data_q);
1493	chan->state = BT_CONNECTED;
1494
1495	list_add_rcu(&chan->list, &conn->chan_list);
1496
1497	return chan;
1498}
1499
1500void hci_chan_del(struct hci_chan *chan)
1501{
1502	struct hci_conn *conn = chan->conn;
1503	struct hci_dev *hdev = conn->hdev;
1504
1505	BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
1506
1507	list_del_rcu(&chan->list);
1508
1509	synchronize_rcu();
1510
1511	/* Prevent new hci_chan's to be created for this hci_conn */
1512	set_bit(HCI_CONN_DROP, &conn->flags);
1513
1514	hci_conn_put(conn);
1515
1516	skb_queue_purge(&chan->data_q);
1517	kfree(chan);
1518}
1519
1520void hci_chan_list_flush(struct hci_conn *conn)
1521{
1522	struct hci_chan *chan, *n;
1523
1524	BT_DBG("hcon %p", conn);
1525
1526	list_for_each_entry_safe(chan, n, &conn->chan_list, list)
1527		hci_chan_del(chan);
1528}
1529
1530static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
1531						 __u16 handle)
1532{
1533	struct hci_chan *hchan;
1534
1535	list_for_each_entry(hchan, &hcon->chan_list, list) {
1536		if (hchan->handle == handle)
1537			return hchan;
1538	}
1539
1540	return NULL;
1541}
1542
1543struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
1544{
1545	struct hci_conn_hash *h = &hdev->conn_hash;
1546	struct hci_conn *hcon;
1547	struct hci_chan *hchan = NULL;
1548
1549	rcu_read_lock();
1550
1551	list_for_each_entry_rcu(hcon, &h->list, list) {
1552		hchan = __hci_chan_lookup_handle(hcon, handle);
1553		if (hchan)
1554			break;
1555	}
1556
1557	rcu_read_unlock();
1558
1559	return hchan;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1560}
v6.9.4
   1/*
   2   BlueZ - Bluetooth protocol stack for Linux
   3   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
   4   Copyright 2023-2024 NXP
   5
   6   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
   7
   8   This program is free software; you can redistribute it and/or modify
   9   it under the terms of the GNU General Public License version 2 as
  10   published by the Free Software Foundation;
  11
  12   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  13   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  14   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
  15   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
  16   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
  17   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  18   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  19   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  20
  21   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
  22   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
  23   SOFTWARE IS DISCLAIMED.
  24*/
  25
  26/* Bluetooth HCI connection handling. */
  27
  28#include <linux/export.h>
  29#include <linux/debugfs.h>
  30
  31#include <net/bluetooth/bluetooth.h>
  32#include <net/bluetooth/hci_core.h>
  33#include <net/bluetooth/l2cap.h>
  34#include <net/bluetooth/iso.h>
  35#include <net/bluetooth/mgmt.h>
  36
  37#include "hci_request.h"
  38#include "smp.h"
  39#include "eir.h"
  40
  41struct sco_param {
  42	u16 pkt_type;
  43	u16 max_latency;
  44	u8  retrans_effort;
  45};
  46
  47struct conn_handle_t {
  48	struct hci_conn *conn;
  49	__u16 handle;
  50};
  51
  52static const struct sco_param esco_param_cvsd[] = {
  53	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
  54	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
  55	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
  56	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
  57	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
  58};
  59
  60static const struct sco_param sco_param_cvsd[] = {
  61	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
  62	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
  63};
  64
  65static const struct sco_param esco_param_msbc[] = {
  66	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d,	0x02 }, /* T2 */
  67	{ EDR_ESCO_MASK | ESCO_EV3,   0x0008,	0x02 }, /* T1 */
  68};
  69
  70/* This function requires the caller holds hdev->lock */
  71void hci_connect_le_scan_cleanup(struct hci_conn *conn, u8 status)
  72{
  73	struct hci_conn_params *params;
  74	struct hci_dev *hdev = conn->hdev;
  75	struct smp_irk *irk;
  76	bdaddr_t *bdaddr;
  77	u8 bdaddr_type;
  78
  79	bdaddr = &conn->dst;
  80	bdaddr_type = conn->dst_type;
  81
  82	/* Check if we need to convert to identity address */
  83	irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
  84	if (irk) {
  85		bdaddr = &irk->bdaddr;
  86		bdaddr_type = irk->addr_type;
  87	}
  88
  89	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
  90					   bdaddr_type);
  91	if (!params)
  92		return;
  93
  94	if (params->conn) {
  95		hci_conn_drop(params->conn);
  96		hci_conn_put(params->conn);
  97		params->conn = NULL;
  98	}
  99
 100	if (!params->explicit_connect)
 101		return;
 102
 103	/* If the status indicates successful cancellation of
 104	 * the attempt (i.e. Unknown Connection Id) there's no point of
 105	 * notifying failure since we'll go back to keep trying to
 106	 * connect. The only exception is explicit connect requests
 107	 * where a timeout + cancel does indicate an actual failure.
 108	 */
 109	if (status && status != HCI_ERROR_UNKNOWN_CONN_ID)
 110		mgmt_connect_failed(hdev, &conn->dst, conn->type,
 111				    conn->dst_type, status);
 112
 113	/* The connection attempt was doing scan for new RPA, and is
 114	 * in scan phase. If params are not associated with any other
 115	 * autoconnect action, remove them completely. If they are, just unmark
 116	 * them as waiting for connection, by clearing explicit_connect field.
 117	 */
 118	params->explicit_connect = false;
 119
 120	hci_pend_le_list_del_init(params);
 121
 122	switch (params->auto_connect) {
 123	case HCI_AUTO_CONN_EXPLICIT:
 124		hci_conn_params_del(hdev, bdaddr, bdaddr_type);
 125		/* return instead of break to avoid duplicate scan update */
 126		return;
 127	case HCI_AUTO_CONN_DIRECT:
 128	case HCI_AUTO_CONN_ALWAYS:
 129		hci_pend_le_list_add(params, &hdev->pend_le_conns);
 130		break;
 131	case HCI_AUTO_CONN_REPORT:
 132		hci_pend_le_list_add(params, &hdev->pend_le_reports);
 133		break;
 134	default:
 135		break;
 136	}
 137
 138	hci_update_passive_scan(hdev);
 139}
 140
 141static void hci_conn_cleanup(struct hci_conn *conn)
 142{
 143	struct hci_dev *hdev = conn->hdev;
 144
 145	if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
 146		hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
 147
 148	if (test_and_clear_bit(HCI_CONN_FLUSH_KEY, &conn->flags))
 149		hci_remove_link_key(hdev, &conn->dst);
 150
 151	hci_chan_list_flush(conn);
 152
 153	hci_conn_hash_del(hdev, conn);
 154
 155	if (HCI_CONN_HANDLE_UNSET(conn->handle))
 156		ida_free(&hdev->unset_handle_ida, conn->handle);
 
 
 157
 158	if (conn->cleanup)
 159		conn->cleanup(conn);
 
 
 
 
 160
 161	if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
 162		switch (conn->setting & SCO_AIRMODE_MASK) {
 163		case SCO_AIRMODE_CVSD:
 164		case SCO_AIRMODE_TRANSP:
 165			if (hdev->notify)
 166				hdev->notify(hdev, HCI_NOTIFY_DISABLE_SCO);
 
 
 
 
 
 
 
 
 
 167			break;
 168		}
 169	} else {
 170		if (hdev->notify)
 171			hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
 172	}
 
 173
 174	debugfs_remove_recursive(conn->debugfs);
 175
 176	hci_conn_del_sysfs(conn);
 
 177
 
 178	hci_dev_put(hdev);
 
 179}
 180
 181int hci_disconnect(struct hci_conn *conn, __u8 reason)
 182{
 183	BT_DBG("hcon %p", conn);
 184
 185	/* When we are central of an established connection and it enters
 186	 * the disconnect timeout, then go ahead and try to read the
 187	 * current clock offset.  Processing of the result is done
 188	 * within the event handling and hci_clock_offset_evt function.
 
 
 189	 */
 190	if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
 191	    (conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
 192		struct hci_dev *hdev = conn->hdev;
 193		struct hci_cp_read_clock_offset clkoff_cp;
 194
 195		clkoff_cp.handle = cpu_to_le16(conn->handle);
 196		hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
 197			     &clkoff_cp);
 198	}
 199
 200	return hci_abort_conn(conn, reason);
 
 
 
 
 201}
 202
 203static void hci_add_sco(struct hci_conn *conn, __u16 handle)
 204{
 205	struct hci_dev *hdev = conn->hdev;
 206	struct hci_cp_add_sco cp;
 
 207
 208	BT_DBG("hcon %p", conn);
 209
 210	conn->state = BT_CONNECT;
 211	conn->out = true;
 
 212
 213	conn->attempt++;
 214
 215	cp.handle   = cpu_to_le16(handle);
 216	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 217
 218	hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
 219}
 
 220
 221static bool find_next_esco_param(struct hci_conn *conn,
 222				 const struct sco_param *esco_param, int size)
 223{
 224	if (!conn->parent)
 225		return false;
 
 
 
 226
 227	for (; conn->attempt <= size; conn->attempt++) {
 228		if (lmp_esco_2m_capable(conn->parent) ||
 229		    (esco_param[conn->attempt - 1].pkt_type & ESCO_2EV3))
 230			break;
 231		BT_DBG("hcon %p skipped attempt %d, eSCO 2M not supported",
 232		       conn, conn->attempt);
 233	}
 234
 235	return conn->attempt <= size;
 
 
 
 
 
 
 236}
 237
 238static int configure_datapath_sync(struct hci_dev *hdev, struct bt_codec *codec)
 239{
 240	int err;
 241	__u8 vnd_len, *vnd_data = NULL;
 242	struct hci_op_configure_data_path *cmd = NULL;
 243
 244	if (!codec->data_path || !hdev->get_codec_config_data)
 245		return 0;
 
 
 
 
 
 
 
 246
 247	/* Do not take me as error */
 248	if (!hdev->get_codec_config_data)
 249		return 0;
 250
 251	err = hdev->get_codec_config_data(hdev, ESCO_LINK, codec, &vnd_len,
 252					  &vnd_data);
 253	if (err < 0)
 254		goto error;
 255
 256	cmd = kzalloc(sizeof(*cmd) + vnd_len, GFP_KERNEL);
 257	if (!cmd) {
 258		err = -ENOMEM;
 259		goto error;
 260	}
 261
 262	err = hdev->get_data_path_id(hdev, &cmd->data_path_id);
 263	if (err < 0)
 264		goto error;
 265
 266	cmd->vnd_len = vnd_len;
 267	memcpy(cmd->vnd_data, vnd_data, vnd_len);
 268
 269	cmd->direction = 0x00;
 270	__hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
 271			      sizeof(*cmd) + vnd_len, cmd, HCI_CMD_TIMEOUT);
 272
 273	cmd->direction = 0x01;
 274	err = __hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
 275				    sizeof(*cmd) + vnd_len, cmd,
 276				    HCI_CMD_TIMEOUT);
 277error:
 278
 279	kfree(cmd);
 280	kfree(vnd_data);
 281	return err;
 282}
 283
 284static int hci_enhanced_setup_sync(struct hci_dev *hdev, void *data)
 285{
 286	struct conn_handle_t *conn_handle = data;
 287	struct hci_conn *conn = conn_handle->conn;
 288	__u16 handle = conn_handle->handle;
 289	struct hci_cp_enhanced_setup_sync_conn cp;
 290	const struct sco_param *param;
 291
 292	kfree(conn_handle);
 293
 294	bt_dev_dbg(hdev, "hcon %p", conn);
 295
 296	configure_datapath_sync(hdev, &conn->codec);
 297
 298	conn->state = BT_CONNECT;
 299	conn->out = true;
 300
 301	conn->attempt++;
 302
 303	memset(&cp, 0x00, sizeof(cp));
 304
 305	cp.handle   = cpu_to_le16(handle);
 
 306
 307	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 308	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 309
 310	switch (conn->codec.id) {
 311	case BT_CODEC_MSBC:
 312		if (!find_next_esco_param(conn, esco_param_msbc,
 313					  ARRAY_SIZE(esco_param_msbc)))
 314			return -EINVAL;
 315
 316		param = &esco_param_msbc[conn->attempt - 1];
 317		cp.tx_coding_format.id = 0x05;
 318		cp.rx_coding_format.id = 0x05;
 319		cp.tx_codec_frame_size = __cpu_to_le16(60);
 320		cp.rx_codec_frame_size = __cpu_to_le16(60);
 321		cp.in_bandwidth = __cpu_to_le32(32000);
 322		cp.out_bandwidth = __cpu_to_le32(32000);
 323		cp.in_coding_format.id = 0x04;
 324		cp.out_coding_format.id = 0x04;
 325		cp.in_coded_data_size = __cpu_to_le16(16);
 326		cp.out_coded_data_size = __cpu_to_le16(16);
 327		cp.in_pcm_data_format = 2;
 328		cp.out_pcm_data_format = 2;
 329		cp.in_pcm_sample_payload_msb_pos = 0;
 330		cp.out_pcm_sample_payload_msb_pos = 0;
 331		cp.in_data_path = conn->codec.data_path;
 332		cp.out_data_path = conn->codec.data_path;
 333		cp.in_transport_unit_size = 1;
 334		cp.out_transport_unit_size = 1;
 335		break;
 336
 337	case BT_CODEC_TRANSPARENT:
 338		if (!find_next_esco_param(conn, esco_param_msbc,
 339					  ARRAY_SIZE(esco_param_msbc)))
 340			return false;
 341		param = &esco_param_msbc[conn->attempt - 1];
 342		cp.tx_coding_format.id = 0x03;
 343		cp.rx_coding_format.id = 0x03;
 344		cp.tx_codec_frame_size = __cpu_to_le16(60);
 345		cp.rx_codec_frame_size = __cpu_to_le16(60);
 346		cp.in_bandwidth = __cpu_to_le32(0x1f40);
 347		cp.out_bandwidth = __cpu_to_le32(0x1f40);
 348		cp.in_coding_format.id = 0x03;
 349		cp.out_coding_format.id = 0x03;
 350		cp.in_coded_data_size = __cpu_to_le16(16);
 351		cp.out_coded_data_size = __cpu_to_le16(16);
 352		cp.in_pcm_data_format = 2;
 353		cp.out_pcm_data_format = 2;
 354		cp.in_pcm_sample_payload_msb_pos = 0;
 355		cp.out_pcm_sample_payload_msb_pos = 0;
 356		cp.in_data_path = conn->codec.data_path;
 357		cp.out_data_path = conn->codec.data_path;
 358		cp.in_transport_unit_size = 1;
 359		cp.out_transport_unit_size = 1;
 360		break;
 361
 362	case BT_CODEC_CVSD:
 363		if (conn->parent && lmp_esco_capable(conn->parent)) {
 364			if (!find_next_esco_param(conn, esco_param_cvsd,
 365						  ARRAY_SIZE(esco_param_cvsd)))
 366				return -EINVAL;
 367			param = &esco_param_cvsd[conn->attempt - 1];
 368		} else {
 369			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 370				return -EINVAL;
 371			param = &sco_param_cvsd[conn->attempt - 1];
 372		}
 373		cp.tx_coding_format.id = 2;
 374		cp.rx_coding_format.id = 2;
 375		cp.tx_codec_frame_size = __cpu_to_le16(60);
 376		cp.rx_codec_frame_size = __cpu_to_le16(60);
 377		cp.in_bandwidth = __cpu_to_le32(16000);
 378		cp.out_bandwidth = __cpu_to_le32(16000);
 379		cp.in_coding_format.id = 4;
 380		cp.out_coding_format.id = 4;
 381		cp.in_coded_data_size = __cpu_to_le16(16);
 382		cp.out_coded_data_size = __cpu_to_le16(16);
 383		cp.in_pcm_data_format = 2;
 384		cp.out_pcm_data_format = 2;
 385		cp.in_pcm_sample_payload_msb_pos = 0;
 386		cp.out_pcm_sample_payload_msb_pos = 0;
 387		cp.in_data_path = conn->codec.data_path;
 388		cp.out_data_path = conn->codec.data_path;
 389		cp.in_transport_unit_size = 16;
 390		cp.out_transport_unit_size = 16;
 391		break;
 392	default:
 393		return -EINVAL;
 394	}
 395
 396	cp.retrans_effort = param->retrans_effort;
 397	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 398	cp.max_latency = __cpu_to_le16(param->max_latency);
 399
 400	if (hci_send_cmd(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 401		return -EIO;
 402
 403	return 0;
 404}
 405
 406static bool hci_setup_sync_conn(struct hci_conn *conn, __u16 handle)
 407{
 408	struct hci_dev *hdev = conn->hdev;
 409	struct hci_cp_setup_sync_conn cp;
 410	const struct sco_param *param;
 411
 412	bt_dev_dbg(hdev, "hcon %p", conn);
 413
 414	conn->state = BT_CONNECT;
 415	conn->out = true;
 416
 417	conn->attempt++;
 418
 419	cp.handle   = cpu_to_le16(handle);
 420
 421	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 422	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 423	cp.voice_setting  = cpu_to_le16(conn->setting);
 424
 425	switch (conn->setting & SCO_AIRMODE_MASK) {
 426	case SCO_AIRMODE_TRANSP:
 427		if (!find_next_esco_param(conn, esco_param_msbc,
 428					  ARRAY_SIZE(esco_param_msbc)))
 429			return false;
 430		param = &esco_param_msbc[conn->attempt - 1];
 431		break;
 432	case SCO_AIRMODE_CVSD:
 433		if (conn->parent && lmp_esco_capable(conn->parent)) {
 434			if (!find_next_esco_param(conn, esco_param_cvsd,
 435						  ARRAY_SIZE(esco_param_cvsd)))
 436				return false;
 437			param = &esco_param_cvsd[conn->attempt - 1];
 438		} else {
 439			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 440				return false;
 441			param = &sco_param_cvsd[conn->attempt - 1];
 442		}
 443		break;
 444	default:
 445		return false;
 446	}
 447
 448	cp.retrans_effort = param->retrans_effort;
 449	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 450	cp.max_latency = __cpu_to_le16(param->max_latency);
 451
 452	if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 453		return false;
 454
 455	return true;
 456}
 457
 458bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 459{
 460	int result;
 461	struct conn_handle_t *conn_handle;
 462
 463	if (enhanced_sync_conn_capable(conn->hdev)) {
 464		conn_handle = kzalloc(sizeof(*conn_handle), GFP_KERNEL);
 465
 466		if (!conn_handle)
 467			return false;
 468
 469		conn_handle->conn = conn;
 470		conn_handle->handle = handle;
 471		result = hci_cmd_sync_queue(conn->hdev, hci_enhanced_setup_sync,
 472					    conn_handle, NULL);
 473		if (result < 0)
 474			kfree(conn_handle);
 475
 476		return result == 0;
 477	}
 478
 479	return hci_setup_sync_conn(conn, handle);
 480}
 481
 482u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
 483		      u16 to_multiplier)
 484{
 485	struct hci_dev *hdev = conn->hdev;
 486	struct hci_conn_params *params;
 487	struct hci_cp_le_conn_update cp;
 488
 489	hci_dev_lock(hdev);
 490
 491	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 492	if (params) {
 493		params->conn_min_interval = min;
 494		params->conn_max_interval = max;
 495		params->conn_latency = latency;
 496		params->supervision_timeout = to_multiplier;
 497	}
 498
 499	hci_dev_unlock(hdev);
 500
 501	memset(&cp, 0, sizeof(cp));
 502	cp.handle		= cpu_to_le16(conn->handle);
 503	cp.conn_interval_min	= cpu_to_le16(min);
 504	cp.conn_interval_max	= cpu_to_le16(max);
 505	cp.conn_latency		= cpu_to_le16(latency);
 506	cp.supervision_timeout	= cpu_to_le16(to_multiplier);
 507	cp.min_ce_len		= cpu_to_le16(0x0000);
 508	cp.max_ce_len		= cpu_to_le16(0x0000);
 509
 510	hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
 511
 512	if (params)
 513		return 0x01;
 514
 515	return 0x00;
 516}
 517
 518void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
 519		      __u8 ltk[16], __u8 key_size)
 520{
 521	struct hci_dev *hdev = conn->hdev;
 522	struct hci_cp_le_start_enc cp;
 523
 524	BT_DBG("hcon %p", conn);
 525
 526	memset(&cp, 0, sizeof(cp));
 527
 528	cp.handle = cpu_to_le16(conn->handle);
 529	cp.rand = rand;
 530	cp.ediv = ediv;
 531	memcpy(cp.ltk, ltk, key_size);
 532
 533	hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
 534}
 535
 536/* Device _must_ be locked */
 537void hci_sco_setup(struct hci_conn *conn, __u8 status)
 538{
 539	struct hci_link *link;
 540
 541	link = list_first_entry_or_null(&conn->link_list, struct hci_link, list);
 542	if (!link || !link->conn)
 543		return;
 544
 545	BT_DBG("hcon %p", conn);
 546
 547	if (!status) {
 548		if (lmp_esco_capable(conn->hdev))
 549			hci_setup_sync(link->conn, conn->handle);
 550		else
 551			hci_add_sco(link->conn, conn->handle);
 552	} else {
 553		hci_connect_cfm(link->conn, status);
 554		hci_conn_del(link->conn);
 555	}
 556}
 557
 558static void hci_conn_timeout(struct work_struct *work)
 559{
 560	struct hci_conn *conn = container_of(work, struct hci_conn,
 561					     disc_work.work);
 562	int refcnt = atomic_read(&conn->refcnt);
 563
 564	BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 565
 566	WARN_ON(refcnt < 0);
 567
 568	/* FIXME: It was observed that in pairing failed scenario, refcnt
 569	 * drops below 0. Probably this is because l2cap_conn_del calls
 570	 * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
 571	 * dropped. After that loop hci_chan_del is called which also drops
 572	 * conn. For now make sure that ACL is alive if refcnt is higher then 0,
 573	 * otherwise drop it.
 574	 */
 575	if (refcnt > 0)
 576		return;
 577
 
 
 
 
 
 
 
 578	hci_abort_conn(conn, hci_proto_disconn_ind(conn));
 579}
 580
 581/* Enter sniff mode */
 582static void hci_conn_idle(struct work_struct *work)
 583{
 584	struct hci_conn *conn = container_of(work, struct hci_conn,
 585					     idle_work.work);
 586	struct hci_dev *hdev = conn->hdev;
 587
 588	BT_DBG("hcon %p mode %d", conn, conn->mode);
 589
 590	if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
 591		return;
 592
 593	if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
 594		return;
 595
 596	if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
 597		struct hci_cp_sniff_subrate cp;
 598		cp.handle             = cpu_to_le16(conn->handle);
 599		cp.max_latency        = cpu_to_le16(0);
 600		cp.min_remote_timeout = cpu_to_le16(0);
 601		cp.min_local_timeout  = cpu_to_le16(0);
 602		hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
 603	}
 604
 605	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
 606		struct hci_cp_sniff_mode cp;
 607		cp.handle       = cpu_to_le16(conn->handle);
 608		cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
 609		cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
 610		cp.attempt      = cpu_to_le16(4);
 611		cp.timeout      = cpu_to_le16(1);
 612		hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
 613	}
 614}
 615
 616static void hci_conn_auto_accept(struct work_struct *work)
 617{
 618	struct hci_conn *conn = container_of(work, struct hci_conn,
 619					     auto_accept_work.work);
 620
 621	hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
 622		     &conn->dst);
 623}
 624
 625static void le_disable_advertising(struct hci_dev *hdev)
 626{
 627	if (ext_adv_capable(hdev)) {
 628		struct hci_cp_le_set_ext_adv_enable cp;
 629
 630		cp.enable = 0x00;
 631		cp.num_of_sets = 0x00;
 632
 633		hci_send_cmd(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, sizeof(cp),
 634			     &cp);
 635	} else {
 636		u8 enable = 0x00;
 637		hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 638			     &enable);
 639	}
 640}
 641
 642static void le_conn_timeout(struct work_struct *work)
 643{
 644	struct hci_conn *conn = container_of(work, struct hci_conn,
 645					     le_conn_timeout.work);
 646	struct hci_dev *hdev = conn->hdev;
 647
 648	BT_DBG("");
 649
 650	/* We could end up here due to having done directed advertising,
 651	 * so clean up the state if necessary. This should however only
 652	 * happen with broken hardware or if low duty cycle was used
 653	 * (which doesn't have a timeout of its own).
 654	 */
 655	if (conn->role == HCI_ROLE_SLAVE) {
 656		/* Disable LE Advertising */
 657		le_disable_advertising(hdev);
 658		hci_dev_lock(hdev);
 659		hci_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
 660		hci_dev_unlock(hdev);
 661		return;
 662	}
 663
 664	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 665}
 666
 667struct iso_cig_params {
 668	struct hci_cp_le_set_cig_params cp;
 669	struct hci_cis_params cis[0x1f];
 670};
 671
 672struct iso_list_data {
 673	union {
 674		u8  cig;
 675		u8  big;
 676	};
 677	union {
 678		u8  cis;
 679		u8  bis;
 680		u16 sync_handle;
 681	};
 682	int count;
 683	bool big_term;
 684	bool pa_sync_term;
 685	bool big_sync_term;
 686};
 687
 688static void bis_list(struct hci_conn *conn, void *data)
 689{
 690	struct iso_list_data *d = data;
 691
 692	/* Skip if not broadcast/ANY address */
 693	if (bacmp(&conn->dst, BDADDR_ANY))
 694		return;
 695
 696	if (d->big != conn->iso_qos.bcast.big || d->bis == BT_ISO_QOS_BIS_UNSET ||
 697	    d->bis != conn->iso_qos.bcast.bis)
 698		return;
 699
 700	d->count++;
 701}
 702
 703static int terminate_big_sync(struct hci_dev *hdev, void *data)
 704{
 705	struct iso_list_data *d = data;
 706
 707	bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", d->big, d->bis);
 708
 709	hci_disable_per_advertising_sync(hdev, d->bis);
 710	hci_remove_ext_adv_instance_sync(hdev, d->bis, NULL);
 711
 712	/* Only terminate BIG if it has been created */
 713	if (!d->big_term)
 714		return 0;
 715
 716	return hci_le_terminate_big_sync(hdev, d->big,
 717					 HCI_ERROR_LOCAL_HOST_TERM);
 718}
 719
 720static void terminate_big_destroy(struct hci_dev *hdev, void *data, int err)
 721{
 722	kfree(data);
 723}
 724
 725static int hci_le_terminate_big(struct hci_dev *hdev, struct hci_conn *conn)
 726{
 727	struct iso_list_data *d;
 728	int ret;
 729
 730	bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", conn->iso_qos.bcast.big,
 731		   conn->iso_qos.bcast.bis);
 732
 733	d = kzalloc(sizeof(*d), GFP_KERNEL);
 734	if (!d)
 735		return -ENOMEM;
 736
 737	d->big = conn->iso_qos.bcast.big;
 738	d->bis = conn->iso_qos.bcast.bis;
 739	d->big_term = test_and_clear_bit(HCI_CONN_BIG_CREATED, &conn->flags);
 740
 741	ret = hci_cmd_sync_queue(hdev, terminate_big_sync, d,
 742				 terminate_big_destroy);
 743	if (ret)
 744		kfree(d);
 745
 746	return ret;
 747}
 748
 749static int big_terminate_sync(struct hci_dev *hdev, void *data)
 750{
 751	struct iso_list_data *d = data;
 752
 753	bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", d->big,
 754		   d->sync_handle);
 755
 756	if (d->big_sync_term)
 757		hci_le_big_terminate_sync(hdev, d->big);
 758
 759	if (d->pa_sync_term)
 760		return hci_le_pa_terminate_sync(hdev, d->sync_handle);
 761
 762	return 0;
 763}
 764
 765static void find_bis(struct hci_conn *conn, void *data)
 766{
 767	struct iso_list_data *d = data;
 768
 769	/* Ignore if BIG doesn't match */
 770	if (d->big != conn->iso_qos.bcast.big)
 771		return;
 772
 773	d->count++;
 774}
 775
 776static int hci_le_big_terminate(struct hci_dev *hdev, u8 big, struct hci_conn *conn)
 777{
 778	struct iso_list_data *d;
 779	int ret;
 780
 781	bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", big, conn->sync_handle);
 782
 783	d = kzalloc(sizeof(*d), GFP_KERNEL);
 784	if (!d)
 785		return -ENOMEM;
 786
 787	memset(d, 0, sizeof(*d));
 788	d->big = big;
 789	d->sync_handle = conn->sync_handle;
 790
 791	if (test_and_clear_bit(HCI_CONN_PA_SYNC, &conn->flags)) {
 792		hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
 793					HCI_CONN_PA_SYNC, d);
 794
 795		if (!d->count)
 796			d->pa_sync_term = true;
 797
 798		d->count = 0;
 799	}
 800
 801	if (test_and_clear_bit(HCI_CONN_BIG_SYNC, &conn->flags)) {
 802		hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
 803					HCI_CONN_BIG_SYNC, d);
 804
 805		if (!d->count)
 806			d->big_sync_term = true;
 807	}
 808
 809	ret = hci_cmd_sync_queue(hdev, big_terminate_sync, d,
 810				 terminate_big_destroy);
 811	if (ret)
 812		kfree(d);
 813
 814	return ret;
 815}
 816
 817/* Cleanup BIS connection
 818 *
 819 * Detects if there any BIS left connected in a BIG
 820 * broadcaster: Remove advertising instance and terminate BIG.
 821 * broadcaster receiver: Teminate BIG sync and terminate PA sync.
 822 */
 823static void bis_cleanup(struct hci_conn *conn)
 824{
 825	struct hci_dev *hdev = conn->hdev;
 826	struct hci_conn *bis;
 827
 828	bt_dev_dbg(hdev, "conn %p", conn);
 829
 830	if (conn->role == HCI_ROLE_MASTER) {
 831		if (!test_and_clear_bit(HCI_CONN_PER_ADV, &conn->flags))
 832			return;
 833
 834		/* Check if ISO connection is a BIS and terminate advertising
 835		 * set and BIG if there are no other connections using it.
 836		 */
 837		bis = hci_conn_hash_lookup_big(hdev, conn->iso_qos.bcast.big);
 838		if (bis)
 839			return;
 840
 841		hci_le_terminate_big(hdev, conn);
 842	} else {
 843		hci_le_big_terminate(hdev, conn->iso_qos.bcast.big,
 844				     conn);
 845	}
 846}
 847
 848static int remove_cig_sync(struct hci_dev *hdev, void *data)
 849{
 850	u8 handle = PTR_UINT(data);
 851
 852	return hci_le_remove_cig_sync(hdev, handle);
 853}
 854
 855static int hci_le_remove_cig(struct hci_dev *hdev, u8 handle)
 856{
 857	bt_dev_dbg(hdev, "handle 0x%2.2x", handle);
 858
 859	return hci_cmd_sync_queue(hdev, remove_cig_sync, UINT_PTR(handle),
 860				  NULL);
 861}
 862
 863static void find_cis(struct hci_conn *conn, void *data)
 864{
 865	struct iso_list_data *d = data;
 866
 867	/* Ignore broadcast or if CIG don't match */
 868	if (!bacmp(&conn->dst, BDADDR_ANY) || d->cig != conn->iso_qos.ucast.cig)
 869		return;
 870
 871	d->count++;
 872}
 873
 874/* Cleanup CIS connection:
 875 *
 876 * Detects if there any CIS left connected in a CIG and remove it.
 877 */
 878static void cis_cleanup(struct hci_conn *conn)
 879{
 880	struct hci_dev *hdev = conn->hdev;
 881	struct iso_list_data d;
 882
 883	if (conn->iso_qos.ucast.cig == BT_ISO_QOS_CIG_UNSET)
 884		return;
 885
 886	memset(&d, 0, sizeof(d));
 887	d.cig = conn->iso_qos.ucast.cig;
 888
 889	/* Check if ISO connection is a CIS and remove CIG if there are
 890	 * no other connections using it.
 891	 */
 892	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_BOUND, &d);
 893	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECT, &d);
 894	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECTED, &d);
 895	if (d.count)
 896		return;
 897
 898	hci_le_remove_cig(hdev, conn->iso_qos.ucast.cig);
 899}
 900
 901static int hci_conn_hash_alloc_unset(struct hci_dev *hdev)
 902{
 903	return ida_alloc_range(&hdev->unset_handle_ida, HCI_CONN_HANDLE_MAX + 1,
 904			       U16_MAX, GFP_ATOMIC);
 905}
 906
 907struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 908			      u8 role, u16 handle)
 909{
 910	struct hci_conn *conn;
 911
 912	switch (type) {
 913	case ACL_LINK:
 914		if (!hdev->acl_mtu)
 915			return ERR_PTR(-ECONNREFUSED);
 916		break;
 917	case ISO_LINK:
 918		if (hdev->iso_mtu)
 919			/* Dedicated ISO Buffer exists */
 920			break;
 921		fallthrough;
 922	case LE_LINK:
 923		if (hdev->le_mtu && hdev->le_mtu < HCI_MIN_LE_MTU)
 924			return ERR_PTR(-ECONNREFUSED);
 925		if (!hdev->le_mtu && hdev->acl_mtu < HCI_MIN_LE_MTU)
 926			return ERR_PTR(-ECONNREFUSED);
 927		break;
 928	case SCO_LINK:
 929	case ESCO_LINK:
 930		if (!hdev->sco_pkts)
 931			/* Controller does not support SCO or eSCO over HCI */
 932			return ERR_PTR(-ECONNREFUSED);
 933		break;
 934	default:
 935		return ERR_PTR(-ECONNREFUSED);
 936	}
 937
 938	bt_dev_dbg(hdev, "dst %pMR handle 0x%4.4x", dst, handle);
 939
 940	conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 941	if (!conn)
 942		return ERR_PTR(-ENOMEM);
 943
 944	bacpy(&conn->dst, dst);
 945	bacpy(&conn->src, &hdev->bdaddr);
 946	conn->handle = handle;
 947	conn->hdev  = hdev;
 948	conn->type  = type;
 949	conn->role  = role;
 950	conn->mode  = HCI_CM_ACTIVE;
 951	conn->state = BT_OPEN;
 952	conn->auth_type = HCI_AT_GENERAL_BONDING;
 953	conn->io_capability = hdev->io_capability;
 954	conn->remote_auth = 0xff;
 955	conn->key_type = 0xff;
 956	conn->rssi = HCI_RSSI_INVALID;
 957	conn->tx_power = HCI_TX_POWER_INVALID;
 958	conn->max_tx_power = HCI_TX_POWER_INVALID;
 959	conn->sync_handle = HCI_SYNC_HANDLE_INVALID;
 960
 961	set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
 962	conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 963
 964	/* Set Default Authenticated payload timeout to 30s */
 965	conn->auth_payload_timeout = DEFAULT_AUTH_PAYLOAD_TIMEOUT;
 966
 967	if (conn->role == HCI_ROLE_MASTER)
 968		conn->out = true;
 969
 970	switch (type) {
 971	case ACL_LINK:
 972		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 973		conn->mtu = hdev->acl_mtu;
 974		break;
 975	case LE_LINK:
 976		/* conn->src should reflect the local identity address */
 977		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
 978		conn->mtu = hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu;
 979		break;
 980	case ISO_LINK:
 981		/* conn->src should reflect the local identity address */
 982		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
 983
 984		/* set proper cleanup function */
 985		if (!bacmp(dst, BDADDR_ANY))
 986			conn->cleanup = bis_cleanup;
 987		else if (conn->role == HCI_ROLE_MASTER)
 988			conn->cleanup = cis_cleanup;
 989
 990		conn->mtu = hdev->iso_mtu ? hdev->iso_mtu :
 991			    hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu;
 992		break;
 993	case SCO_LINK:
 994		if (lmp_esco_capable(hdev))
 995			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
 996					(hdev->esco_type & EDR_ESCO_MASK);
 997		else
 998			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
 999
1000		conn->mtu = hdev->sco_mtu;
1001		break;
1002	case ESCO_LINK:
1003		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
1004		conn->mtu = hdev->sco_mtu;
1005		break;
1006	}
1007
1008	skb_queue_head_init(&conn->data_q);
1009
1010	INIT_LIST_HEAD(&conn->chan_list);
1011	INIT_LIST_HEAD(&conn->link_list);
1012
1013	INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
1014	INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
1015	INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
1016	INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
 
1017
1018	atomic_set(&conn->refcnt, 0);
1019
1020	hci_dev_hold(hdev);
1021
1022	hci_conn_hash_add(hdev, conn);
1023
1024	/* The SCO and eSCO connections will only be notified when their
1025	 * setup has been completed. This is different to ACL links which
1026	 * can be notified right away.
1027	 */
1028	if (conn->type != SCO_LINK && conn->type != ESCO_LINK) {
1029		if (hdev->notify)
1030			hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
1031	}
1032
1033	hci_conn_init_sysfs(conn);
1034
1035	return conn;
1036}
1037
1038struct hci_conn *hci_conn_add_unset(struct hci_dev *hdev, int type,
1039				    bdaddr_t *dst, u8 role)
1040{
1041	int handle;
1042
1043	bt_dev_dbg(hdev, "dst %pMR", dst);
1044
1045	handle = hci_conn_hash_alloc_unset(hdev);
1046	if (unlikely(handle < 0))
1047		return ERR_PTR(-ECONNREFUSED);
1048
1049	return hci_conn_add(hdev, type, dst, role, handle);
1050}
1051
1052static void hci_conn_cleanup_child(struct hci_conn *conn, u8 reason)
1053{
1054	if (!reason)
1055		reason = HCI_ERROR_REMOTE_USER_TERM;
1056
1057	/* Due to race, SCO/ISO conn might be not established yet at this point,
1058	 * and nothing else will clean it up. In other cases it is done via HCI
1059	 * events.
1060	 */
1061	switch (conn->type) {
1062	case SCO_LINK:
1063	case ESCO_LINK:
1064		if (HCI_CONN_HANDLE_UNSET(conn->handle))
1065			hci_conn_failed(conn, reason);
1066		break;
1067	case ISO_LINK:
1068		if ((conn->state != BT_CONNECTED &&
1069		    !test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) ||
1070		    test_bit(HCI_CONN_BIG_CREATED, &conn->flags))
1071			hci_conn_failed(conn, reason);
1072		break;
1073	}
1074}
1075
1076static void hci_conn_unlink(struct hci_conn *conn)
1077{
1078	struct hci_dev *hdev = conn->hdev;
1079
1080	bt_dev_dbg(hdev, "hcon %p", conn);
1081
1082	if (!conn->parent) {
1083		struct hci_link *link, *t;
1084
1085		list_for_each_entry_safe(link, t, &conn->link_list, list) {
1086			struct hci_conn *child = link->conn;
1087
1088			hci_conn_unlink(child);
1089
1090			/* If hdev is down it means
1091			 * hci_dev_close_sync/hci_conn_hash_flush is in progress
1092			 * and links don't need to be cleanup as all connections
1093			 * would be cleanup.
1094			 */
1095			if (!test_bit(HCI_UP, &hdev->flags))
1096				continue;
1097
1098			hci_conn_cleanup_child(child, conn->abort_reason);
1099		}
1100
1101		return;
1102	}
1103
1104	if (!conn->link)
1105		return;
1106
1107	list_del_rcu(&conn->link->list);
1108	synchronize_rcu();
1109
1110	hci_conn_drop(conn->parent);
1111	hci_conn_put(conn->parent);
1112	conn->parent = NULL;
1113
1114	kfree(conn->link);
1115	conn->link = NULL;
1116}
1117
1118void hci_conn_del(struct hci_conn *conn)
1119{
1120	struct hci_dev *hdev = conn->hdev;
1121
1122	BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
1123
1124	hci_conn_unlink(conn);
1125
1126	cancel_delayed_work_sync(&conn->disc_work);
1127	cancel_delayed_work_sync(&conn->auto_accept_work);
1128	cancel_delayed_work_sync(&conn->idle_work);
1129
1130	if (conn->type == ACL_LINK) {
 
 
 
 
1131		/* Unacked frames */
1132		hdev->acl_cnt += conn->sent;
1133	} else if (conn->type == LE_LINK) {
1134		cancel_delayed_work(&conn->le_conn_timeout);
1135
1136		if (hdev->le_pkts)
1137			hdev->le_cnt += conn->sent;
1138		else
1139			hdev->acl_cnt += conn->sent;
1140	} else {
1141		/* Unacked ISO frames */
1142		if (conn->type == ISO_LINK) {
1143			if (hdev->iso_pkts)
1144				hdev->iso_cnt += conn->sent;
1145			else if (hdev->le_pkts)
1146				hdev->le_cnt += conn->sent;
1147			else
1148				hdev->acl_cnt += conn->sent;
1149		}
1150	}
1151
 
 
 
1152	skb_queue_purge(&conn->data_q);
1153
1154	/* Remove the connection from the list and cleanup its remaining
1155	 * state. This is a separate function since for some cases like
1156	 * BT_CONNECT_SCAN we *only* want the cleanup part without the
1157	 * rest of hci_conn_del.
1158	 */
1159	hci_conn_cleanup(conn);
1160
1161	/* Dequeue callbacks using connection pointer as data */
1162	hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
1163}
1164
1165struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
1166{
1167	int use_src = bacmp(src, BDADDR_ANY);
1168	struct hci_dev *hdev = NULL, *d;
1169
1170	BT_DBG("%pMR -> %pMR", src, dst);
1171
1172	read_lock(&hci_dev_list_lock);
1173
1174	list_for_each_entry(d, &hci_dev_list, list) {
1175		if (!test_bit(HCI_UP, &d->flags) ||
1176		    hci_dev_test_flag(d, HCI_USER_CHANNEL))
 
1177			continue;
1178
1179		/* Simple routing:
1180		 *   No source address - find interface with bdaddr != dst
1181		 *   Source address    - find interface with bdaddr == src
1182		 */
1183
1184		if (use_src) {
1185			bdaddr_t id_addr;
1186			u8 id_addr_type;
1187
1188			if (src_type == BDADDR_BREDR) {
1189				if (!lmp_bredr_capable(d))
1190					continue;
1191				bacpy(&id_addr, &d->bdaddr);
1192				id_addr_type = BDADDR_BREDR;
1193			} else {
1194				if (!lmp_le_capable(d))
1195					continue;
1196
1197				hci_copy_identity_address(d, &id_addr,
1198							  &id_addr_type);
1199
1200				/* Convert from HCI to three-value type */
1201				if (id_addr_type == ADDR_LE_DEV_PUBLIC)
1202					id_addr_type = BDADDR_LE_PUBLIC;
1203				else
1204					id_addr_type = BDADDR_LE_RANDOM;
1205			}
1206
1207			if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
1208				hdev = d; break;
1209			}
1210		} else {
1211			if (bacmp(&d->bdaddr, dst)) {
1212				hdev = d; break;
1213			}
1214		}
1215	}
1216
1217	if (hdev)
1218		hdev = hci_dev_hold(hdev);
1219
1220	read_unlock(&hci_dev_list_lock);
1221	return hdev;
1222}
1223EXPORT_SYMBOL(hci_get_route);
1224
1225/* This function requires the caller holds hdev->lock */
1226static void hci_le_conn_failed(struct hci_conn *conn, u8 status)
1227{
1228	struct hci_dev *hdev = conn->hdev;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1229
1230	hci_connect_le_scan_cleanup(conn, status);
 
 
 
1231
1232	/* Enable advertising in case this was a failed connection
1233	 * attempt as a peripheral.
1234	 */
1235	hci_enable_advertising(hdev);
1236}
1237
1238/* This function requires the caller holds hdev->lock */
1239void hci_conn_failed(struct hci_conn *conn, u8 status)
1240{
1241	struct hci_dev *hdev = conn->hdev;
 
 
1242
1243	bt_dev_dbg(hdev, "status 0x%2.2x", status);
1244
1245	switch (conn->type) {
1246	case LE_LINK:
1247		hci_le_conn_failed(conn, status);
1248		break;
1249	case ACL_LINK:
1250		mgmt_connect_failed(hdev, &conn->dst, conn->type,
1251				    conn->dst_type, status);
1252		break;
1253	}
1254
1255	/* In case of BIG/PA sync failed, clear conn flags so that
1256	 * the conns will be correctly cleaned up by ISO layer
1257	 */
1258	test_and_clear_bit(HCI_CONN_BIG_SYNC_FAILED, &conn->flags);
1259	test_and_clear_bit(HCI_CONN_PA_SYNC_FAILED, &conn->flags);
 
 
 
 
 
 
 
 
 
 
1260
1261	conn->state = BT_CLOSED;
1262	hci_connect_cfm(conn, status);
1263	hci_conn_del(conn);
1264}
1265
1266/* This function requires the caller holds hdev->lock */
1267u8 hci_conn_set_handle(struct hci_conn *conn, u16 handle)
1268{
 
1269	struct hci_dev *hdev = conn->hdev;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1270
1271	bt_dev_dbg(hdev, "hcon %p handle 0x%4.4x", conn, handle);
1272
1273	if (conn->handle == handle)
1274		return 0;
 
 
 
 
 
 
 
 
 
1275
1276	if (handle > HCI_CONN_HANDLE_MAX) {
1277		bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
1278			   handle, HCI_CONN_HANDLE_MAX);
1279		return HCI_ERROR_INVALID_PARAMETERS;
1280	}
 
1281
1282	/* If abort_reason has been sent it means the connection is being
1283	 * aborted and the handle shall not be changed.
1284	 */
1285	if (conn->abort_reason)
1286		return conn->abort_reason;
 
1287
1288	if (HCI_CONN_HANDLE_UNSET(conn->handle))
1289		ida_free(&hdev->unset_handle_ida, conn->handle);
 
 
 
 
 
 
1290
1291	conn->handle = handle;
 
1292
1293	return 0;
1294}
1295
1296struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
1297				u8 dst_type, bool dst_resolved, u8 sec_level,
1298				u16 conn_timeout, u8 role, u8 phy, u8 sec_phy)
1299{
 
1300	struct hci_conn *conn;
1301	struct smp_irk *irk;
 
1302	int err;
1303
1304	/* Let's make sure that le is enabled.*/
1305	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1306		if (lmp_le_capable(hdev))
1307			return ERR_PTR(-ECONNREFUSED);
1308
1309		return ERR_PTR(-EOPNOTSUPP);
1310	}
1311
1312	/* Since the controller supports only one LE connection attempt at a
1313	 * time, we return -EBUSY if there is any connection attempt running.
1314	 */
1315	if (hci_lookup_le_connect(hdev))
1316		return ERR_PTR(-EBUSY);
1317
1318	/* If there's already a connection object but it's not in
1319	 * scanning state it means it must already be established, in
1320	 * which case we can't do anything else except report a failure
1321	 * to connect.
1322	 */
1323	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1324	if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
1325		return ERR_PTR(-EBUSY);
1326	}
1327
1328	/* Check if the destination address has been resolved by the controller
1329	 * since if it did then the identity address shall be used.
1330	 */
1331	if (!dst_resolved) {
1332		/* When given an identity address with existing identity
1333		 * resolving key, the connection needs to be established
1334		 * to a resolvable random address.
1335		 *
1336		 * Storing the resolvable random address is required here
1337		 * to handle connection failures. The address will later
1338		 * be resolved back into the original identity address
1339		 * from the connect request.
1340		 */
1341		irk = hci_find_irk_by_addr(hdev, dst, dst_type);
1342		if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
1343			dst = &irk->rpa;
1344			dst_type = ADDR_LE_DEV_RANDOM;
1345		}
1346	}
1347
1348	if (conn) {
1349		bacpy(&conn->dst, dst);
1350	} else {
1351		conn = hci_conn_add_unset(hdev, LE_LINK, dst, role);
1352		if (IS_ERR(conn))
1353			return conn;
1354		hci_conn_hold(conn);
1355		conn->pending_sec_level = sec_level;
1356	}
1357
1358	conn->dst_type = dst_type;
1359	conn->sec_level = BT_SECURITY_LOW;
1360	conn->conn_timeout = conn_timeout;
1361	conn->le_adv_phy = phy;
1362	conn->le_adv_sec_phy = sec_phy;
1363
1364	err = hci_connect_le_sync(hdev, conn);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1365	if (err) {
1366		hci_conn_del(conn);
1367		return ERR_PTR(err);
1368	}
1369
1370	return conn;
1371}
1372
1373static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
1374{
1375	struct hci_conn *conn;
1376
1377	conn = hci_conn_hash_lookup_le(hdev, addr, type);
1378	if (!conn)
1379		return false;
1380
1381	if (conn->state != BT_CONNECTED)
1382		return false;
1383
1384	return true;
1385}
1386
1387/* This function requires the caller holds hdev->lock */
1388static int hci_explicit_conn_params_set(struct hci_dev *hdev,
1389					bdaddr_t *addr, u8 addr_type)
1390{
1391	struct hci_conn_params *params;
1392
1393	if (is_connected(hdev, addr, addr_type))
1394		return -EISCONN;
1395
1396	params = hci_conn_params_lookup(hdev, addr, addr_type);
1397	if (!params) {
1398		params = hci_conn_params_add(hdev, addr, addr_type);
1399		if (!params)
1400			return -ENOMEM;
1401
1402		/* If we created new params, mark them to be deleted in
1403		 * hci_connect_le_scan_cleanup. It's different case than
1404		 * existing disabled params, those will stay after cleanup.
1405		 */
1406		params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
1407	}
1408
1409	/* We're trying to connect, so make sure params are at pend_le_conns */
1410	if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
1411	    params->auto_connect == HCI_AUTO_CONN_REPORT ||
1412	    params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
1413		hci_pend_le_list_del_init(params);
1414		hci_pend_le_list_add(params, &hdev->pend_le_conns);
1415	}
1416
1417	params->explicit_connect = true;
1418
1419	BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
1420	       params->auto_connect);
1421
1422	return 0;
1423}
1424
1425static int qos_set_big(struct hci_dev *hdev, struct bt_iso_qos *qos)
1426{
1427	struct hci_conn *conn;
1428	u8  big;
1429
1430	/* Allocate a BIG if not set */
1431	if (qos->bcast.big == BT_ISO_QOS_BIG_UNSET) {
1432		for (big = 0x00; big < 0xef; big++) {
1433
1434			conn = hci_conn_hash_lookup_big(hdev, big);
1435			if (!conn)
1436				break;
1437		}
1438
1439		if (big == 0xef)
1440			return -EADDRNOTAVAIL;
1441
1442		/* Update BIG */
1443		qos->bcast.big = big;
1444	}
1445
1446	return 0;
1447}
1448
1449static int qos_set_bis(struct hci_dev *hdev, struct bt_iso_qos *qos)
1450{
1451	struct hci_conn *conn;
1452	u8  bis;
1453
1454	/* Allocate BIS if not set */
1455	if (qos->bcast.bis == BT_ISO_QOS_BIS_UNSET) {
1456		if (qos->bcast.big != BT_ISO_QOS_BIG_UNSET) {
1457			conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
1458
1459			if (conn) {
1460				/* If the BIG handle is already matched to an advertising
1461				 * handle, do not allocate a new one.
1462				 */
1463				qos->bcast.bis = conn->iso_qos.bcast.bis;
1464				return 0;
1465			}
1466		}
1467
1468		/* Find an unused adv set to advertise BIS, skip instance 0x00
1469		 * since it is reserved as general purpose set.
1470		 */
1471		for (bis = 0x01; bis < hdev->le_num_of_adv_sets;
1472		     bis++) {
1473
1474			conn = hci_conn_hash_lookup_bis(hdev, BDADDR_ANY, bis);
1475			if (!conn)
1476				break;
1477		}
1478
1479		if (bis == hdev->le_num_of_adv_sets)
1480			return -EADDRNOTAVAIL;
1481
1482		/* Update BIS */
1483		qos->bcast.bis = bis;
1484	}
1485
1486	return 0;
1487}
1488
1489/* This function requires the caller holds hdev->lock */
1490static struct hci_conn *hci_add_bis(struct hci_dev *hdev, bdaddr_t *dst,
1491				    struct bt_iso_qos *qos, __u8 base_len,
1492				    __u8 *base)
1493{
1494	struct hci_conn *conn;
1495	int err;
1496
1497	/* Let's make sure that le is enabled.*/
1498	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1499		if (lmp_le_capable(hdev))
1500			return ERR_PTR(-ECONNREFUSED);
1501		return ERR_PTR(-EOPNOTSUPP);
1502	}
1503
1504	err = qos_set_big(hdev, qos);
1505	if (err)
1506		return ERR_PTR(err);
1507
1508	err = qos_set_bis(hdev, qos);
1509	if (err)
1510		return ERR_PTR(err);
1511
1512	/* Check if the LE Create BIG command has already been sent */
1513	conn = hci_conn_hash_lookup_per_adv_bis(hdev, dst, qos->bcast.big,
1514						qos->bcast.big);
1515	if (conn)
1516		return ERR_PTR(-EADDRINUSE);
1517
1518	/* Check BIS settings against other bound BISes, since all
1519	 * BISes in a BIG must have the same value for all parameters
1520	 */
1521	conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
1522
1523	if (conn && (memcmp(qos, &conn->iso_qos, sizeof(*qos)) ||
1524		     base_len != conn->le_per_adv_data_len ||
1525		     memcmp(conn->le_per_adv_data, base, base_len)))
1526		return ERR_PTR(-EADDRINUSE);
1527
1528	conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
1529	if (IS_ERR(conn))
1530		return conn;
1531
1532	conn->state = BT_CONNECT;
1533
1534	hci_conn_hold(conn);
1535	return conn;
1536}
1537
1538/* This function requires the caller holds hdev->lock */
1539struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
1540				     u8 dst_type, u8 sec_level,
1541				     u16 conn_timeout,
1542				     enum conn_reasons conn_reason)
1543{
1544	struct hci_conn *conn;
1545
1546	/* Let's make sure that le is enabled.*/
1547	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1548		if (lmp_le_capable(hdev))
1549			return ERR_PTR(-ECONNREFUSED);
1550
1551		return ERR_PTR(-EOPNOTSUPP);
1552	}
1553
1554	/* Some devices send ATT messages as soon as the physical link is
1555	 * established. To be able to handle these ATT messages, the user-
1556	 * space first establishes the connection and then starts the pairing
1557	 * process.
1558	 *
1559	 * So if a hci_conn object already exists for the following connection
1560	 * attempt, we simply update pending_sec_level and auth_type fields
1561	 * and return the object found.
1562	 */
1563	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1564	if (conn) {
1565		if (conn->pending_sec_level < sec_level)
1566			conn->pending_sec_level = sec_level;
1567		goto done;
1568	}
1569
1570	BT_DBG("requesting refresh of dst_addr");
1571
1572	conn = hci_conn_add_unset(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
1573	if (IS_ERR(conn))
1574		return conn;
1575
1576	if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0) {
1577		hci_conn_del(conn);
1578		return ERR_PTR(-EBUSY);
1579	}
1580
1581	conn->state = BT_CONNECT;
1582	set_bit(HCI_CONN_SCANNING, &conn->flags);
1583	conn->dst_type = dst_type;
1584	conn->sec_level = BT_SECURITY_LOW;
1585	conn->pending_sec_level = sec_level;
1586	conn->conn_timeout = conn_timeout;
1587	conn->conn_reason = conn_reason;
1588
1589	hci_update_passive_scan(hdev);
1590
1591done:
1592	hci_conn_hold(conn);
1593	return conn;
1594}
1595
1596struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
1597				 u8 sec_level, u8 auth_type,
1598				 enum conn_reasons conn_reason, u16 timeout)
1599{
1600	struct hci_conn *acl;
1601
1602	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
1603		if (lmp_bredr_capable(hdev))
1604			return ERR_PTR(-ECONNREFUSED);
1605
1606		return ERR_PTR(-EOPNOTSUPP);
1607	}
1608
1609	/* Reject outgoing connection to device with same BD ADDR against
1610	 * CVE-2020-26555
1611	 */
1612	if (!bacmp(&hdev->bdaddr, dst)) {
1613		bt_dev_dbg(hdev, "Reject connection with same BD_ADDR %pMR\n",
1614			   dst);
1615		return ERR_PTR(-ECONNREFUSED);
1616	}
1617
1618	acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
1619	if (!acl) {
1620		acl = hci_conn_add_unset(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
1621		if (IS_ERR(acl))
1622			return acl;
1623	}
1624
1625	hci_conn_hold(acl);
1626
1627	acl->conn_reason = conn_reason;
1628	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
1629		int err;
1630
1631		acl->sec_level = BT_SECURITY_LOW;
1632		acl->pending_sec_level = sec_level;
1633		acl->auth_type = auth_type;
1634		acl->conn_timeout = timeout;
1635
1636		err = hci_connect_acl_sync(hdev, acl);
1637		if (err) {
1638			hci_conn_del(acl);
1639			return ERR_PTR(err);
1640		}
1641	}
1642
1643	return acl;
1644}
1645
1646static struct hci_link *hci_conn_link(struct hci_conn *parent,
1647				      struct hci_conn *conn)
1648{
1649	struct hci_dev *hdev = parent->hdev;
1650	struct hci_link *link;
1651
1652	bt_dev_dbg(hdev, "parent %p hcon %p", parent, conn);
1653
1654	if (conn->link)
1655		return conn->link;
1656
1657	if (conn->parent)
1658		return NULL;
1659
1660	link = kzalloc(sizeof(*link), GFP_KERNEL);
1661	if (!link)
1662		return NULL;
1663
1664	link->conn = hci_conn_hold(conn);
1665	conn->link = link;
1666	conn->parent = hci_conn_get(parent);
1667
1668	/* Use list_add_tail_rcu append to the list */
1669	list_add_tail_rcu(&link->list, &parent->link_list);
1670
1671	return link;
1672}
1673
1674struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
1675				 __u16 setting, struct bt_codec *codec,
1676				 u16 timeout)
1677{
1678	struct hci_conn *acl;
1679	struct hci_conn *sco;
1680	struct hci_link *link;
1681
1682	acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING,
1683			      CONN_REASON_SCO_CONNECT, timeout);
1684	if (IS_ERR(acl))
1685		return acl;
1686
1687	sco = hci_conn_hash_lookup_ba(hdev, type, dst);
1688	if (!sco) {
1689		sco = hci_conn_add_unset(hdev, type, dst, HCI_ROLE_MASTER);
1690		if (IS_ERR(sco)) {
1691			hci_conn_drop(acl);
1692			return sco;
1693		}
1694	}
1695
1696	link = hci_conn_link(acl, sco);
1697	if (!link) {
1698		hci_conn_drop(acl);
1699		hci_conn_drop(sco);
1700		return ERR_PTR(-ENOLINK);
1701	}
1702
1703	sco->setting = setting;
1704	sco->codec = *codec;
1705
1706	if (acl->state == BT_CONNECTED &&
1707	    (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
1708		set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
1709		hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
1710
1711		if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
1712			/* defer SCO setup until mode change completed */
1713			set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
1714			return sco;
1715		}
1716
1717		hci_sco_setup(acl, 0x00);
1718	}
1719
1720	return sco;
1721}
1722
1723static int hci_le_create_big(struct hci_conn *conn, struct bt_iso_qos *qos)
1724{
1725	struct hci_dev *hdev = conn->hdev;
1726	struct hci_cp_le_create_big cp;
1727	struct iso_list_data data;
1728
1729	memset(&cp, 0, sizeof(cp));
1730
1731	data.big = qos->bcast.big;
1732	data.bis = qos->bcast.bis;
1733	data.count = 0;
1734
1735	/* Create a BIS for each bound connection */
1736	hci_conn_hash_list_state(hdev, bis_list, ISO_LINK,
1737				 BT_BOUND, &data);
1738
1739	cp.handle = qos->bcast.big;
1740	cp.adv_handle = qos->bcast.bis;
1741	cp.num_bis  = data.count;
1742	hci_cpu_to_le24(qos->bcast.out.interval, cp.bis.sdu_interval);
1743	cp.bis.sdu = cpu_to_le16(qos->bcast.out.sdu);
1744	cp.bis.latency =  cpu_to_le16(qos->bcast.out.latency);
1745	cp.bis.rtn  = qos->bcast.out.rtn;
1746	cp.bis.phy  = qos->bcast.out.phy;
1747	cp.bis.packing = qos->bcast.packing;
1748	cp.bis.framing = qos->bcast.framing;
1749	cp.bis.encryption = qos->bcast.encryption;
1750	memcpy(cp.bis.bcode, qos->bcast.bcode, sizeof(cp.bis.bcode));
1751
1752	return hci_send_cmd(hdev, HCI_OP_LE_CREATE_BIG, sizeof(cp), &cp);
1753}
1754
1755static int set_cig_params_sync(struct hci_dev *hdev, void *data)
1756{
1757	u8 cig_id = PTR_UINT(data);
1758	struct hci_conn *conn;
1759	struct bt_iso_qos *qos;
1760	struct iso_cig_params pdu;
1761	u8 cis_id;
1762
1763	conn = hci_conn_hash_lookup_cig(hdev, cig_id);
1764	if (!conn)
1765		return 0;
1766
1767	memset(&pdu, 0, sizeof(pdu));
1768
1769	qos = &conn->iso_qos;
1770	pdu.cp.cig_id = cig_id;
1771	hci_cpu_to_le24(qos->ucast.out.interval, pdu.cp.c_interval);
1772	hci_cpu_to_le24(qos->ucast.in.interval, pdu.cp.p_interval);
1773	pdu.cp.sca = qos->ucast.sca;
1774	pdu.cp.packing = qos->ucast.packing;
1775	pdu.cp.framing = qos->ucast.framing;
1776	pdu.cp.c_latency = cpu_to_le16(qos->ucast.out.latency);
1777	pdu.cp.p_latency = cpu_to_le16(qos->ucast.in.latency);
1778
1779	/* Reprogram all CIS(s) with the same CIG, valid range are:
1780	 * num_cis: 0x00 to 0x1F
1781	 * cis_id: 0x00 to 0xEF
1782	 */
1783	for (cis_id = 0x00; cis_id < 0xf0 &&
1784	     pdu.cp.num_cis < ARRAY_SIZE(pdu.cis); cis_id++) {
1785		struct hci_cis_params *cis;
1786
1787		conn = hci_conn_hash_lookup_cis(hdev, NULL, 0, cig_id, cis_id);
1788		if (!conn)
1789			continue;
1790
1791		qos = &conn->iso_qos;
1792
1793		cis = &pdu.cis[pdu.cp.num_cis++];
1794		cis->cis_id = cis_id;
1795		cis->c_sdu  = cpu_to_le16(conn->iso_qos.ucast.out.sdu);
1796		cis->p_sdu  = cpu_to_le16(conn->iso_qos.ucast.in.sdu);
1797		cis->c_phy  = qos->ucast.out.phy ? qos->ucast.out.phy :
1798			      qos->ucast.in.phy;
1799		cis->p_phy  = qos->ucast.in.phy ? qos->ucast.in.phy :
1800			      qos->ucast.out.phy;
1801		cis->c_rtn  = qos->ucast.out.rtn;
1802		cis->p_rtn  = qos->ucast.in.rtn;
1803	}
1804
1805	if (!pdu.cp.num_cis)
1806		return 0;
1807
1808	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_CIG_PARAMS,
1809				     sizeof(pdu.cp) +
1810				     pdu.cp.num_cis * sizeof(pdu.cis[0]), &pdu,
1811				     HCI_CMD_TIMEOUT);
1812}
1813
1814static bool hci_le_set_cig_params(struct hci_conn *conn, struct bt_iso_qos *qos)
1815{
1816	struct hci_dev *hdev = conn->hdev;
1817	struct iso_list_data data;
1818
1819	memset(&data, 0, sizeof(data));
1820
1821	/* Allocate first still reconfigurable CIG if not set */
1822	if (qos->ucast.cig == BT_ISO_QOS_CIG_UNSET) {
1823		for (data.cig = 0x00; data.cig < 0xf0; data.cig++) {
1824			data.count = 0;
1825
1826			hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
1827						 BT_CONNECT, &data);
1828			if (data.count)
1829				continue;
1830
1831			hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
1832						 BT_CONNECTED, &data);
1833			if (!data.count)
1834				break;
1835		}
1836
1837		if (data.cig == 0xf0)
1838			return false;
1839
1840		/* Update CIG */
1841		qos->ucast.cig = data.cig;
1842	}
1843
1844	if (qos->ucast.cis != BT_ISO_QOS_CIS_UNSET) {
1845		if (hci_conn_hash_lookup_cis(hdev, NULL, 0, qos->ucast.cig,
1846					     qos->ucast.cis))
1847			return false;
1848		goto done;
1849	}
1850
1851	/* Allocate first available CIS if not set */
1852	for (data.cig = qos->ucast.cig, data.cis = 0x00; data.cis < 0xf0;
1853	     data.cis++) {
1854		if (!hci_conn_hash_lookup_cis(hdev, NULL, 0, data.cig,
1855					      data.cis)) {
1856			/* Update CIS */
1857			qos->ucast.cis = data.cis;
1858			break;
1859		}
1860	}
1861
1862	if (qos->ucast.cis == BT_ISO_QOS_CIS_UNSET)
1863		return false;
1864
1865done:
1866	if (hci_cmd_sync_queue(hdev, set_cig_params_sync,
1867			       UINT_PTR(qos->ucast.cig), NULL) < 0)
1868		return false;
1869
1870	return true;
1871}
1872
1873struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst,
1874			      __u8 dst_type, struct bt_iso_qos *qos)
1875{
1876	struct hci_conn *cis;
1877
1878	cis = hci_conn_hash_lookup_cis(hdev, dst, dst_type, qos->ucast.cig,
1879				       qos->ucast.cis);
1880	if (!cis) {
1881		cis = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
1882		if (IS_ERR(cis))
1883			return cis;
1884		cis->cleanup = cis_cleanup;
1885		cis->dst_type = dst_type;
1886		cis->iso_qos.ucast.cig = BT_ISO_QOS_CIG_UNSET;
1887		cis->iso_qos.ucast.cis = BT_ISO_QOS_CIS_UNSET;
1888	}
1889
1890	if (cis->state == BT_CONNECTED)
1891		return cis;
1892
1893	/* Check if CIS has been set and the settings matches */
1894	if (cis->state == BT_BOUND &&
1895	    !memcmp(&cis->iso_qos, qos, sizeof(*qos)))
1896		return cis;
1897
1898	/* Update LINK PHYs according to QoS preference */
1899	cis->le_tx_phy = qos->ucast.out.phy;
1900	cis->le_rx_phy = qos->ucast.in.phy;
1901
1902	/* If output interval is not set use the input interval as it cannot be
1903	 * 0x000000.
1904	 */
1905	if (!qos->ucast.out.interval)
1906		qos->ucast.out.interval = qos->ucast.in.interval;
1907
1908	/* If input interval is not set use the output interval as it cannot be
1909	 * 0x000000.
1910	 */
1911	if (!qos->ucast.in.interval)
1912		qos->ucast.in.interval = qos->ucast.out.interval;
1913
1914	/* If output latency is not set use the input latency as it cannot be
1915	 * 0x0000.
1916	 */
1917	if (!qos->ucast.out.latency)
1918		qos->ucast.out.latency = qos->ucast.in.latency;
1919
1920	/* If input latency is not set use the output latency as it cannot be
1921	 * 0x0000.
1922	 */
1923	if (!qos->ucast.in.latency)
1924		qos->ucast.in.latency = qos->ucast.out.latency;
1925
1926	if (!hci_le_set_cig_params(cis, qos)) {
1927		hci_conn_drop(cis);
1928		return ERR_PTR(-EINVAL);
1929	}
1930
1931	hci_conn_hold(cis);
1932
1933	cis->iso_qos = *qos;
1934	cis->state = BT_BOUND;
1935
1936	return cis;
1937}
1938
1939bool hci_iso_setup_path(struct hci_conn *conn)
1940{
1941	struct hci_dev *hdev = conn->hdev;
1942	struct hci_cp_le_setup_iso_path cmd;
1943
1944	memset(&cmd, 0, sizeof(cmd));
1945
1946	if (conn->iso_qos.ucast.out.sdu) {
1947		cmd.handle = cpu_to_le16(conn->handle);
1948		cmd.direction = 0x00; /* Input (Host to Controller) */
1949		cmd.path = 0x00; /* HCI path if enabled */
1950		cmd.codec = 0x03; /* Transparent Data */
1951
1952		if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
1953				 &cmd) < 0)
1954			return false;
1955	}
1956
1957	if (conn->iso_qos.ucast.in.sdu) {
1958		cmd.handle = cpu_to_le16(conn->handle);
1959		cmd.direction = 0x01; /* Output (Controller to Host) */
1960		cmd.path = 0x00; /* HCI path if enabled */
1961		cmd.codec = 0x03; /* Transparent Data */
1962
1963		if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
1964				 &cmd) < 0)
1965			return false;
1966	}
1967
1968	return true;
1969}
1970
1971int hci_conn_check_create_cis(struct hci_conn *conn)
1972{
1973	if (conn->type != ISO_LINK || !bacmp(&conn->dst, BDADDR_ANY))
1974		return -EINVAL;
1975
1976	if (!conn->parent || conn->parent->state != BT_CONNECTED ||
1977	    conn->state != BT_CONNECT || HCI_CONN_HANDLE_UNSET(conn->handle))
1978		return 1;
1979
1980	return 0;
1981}
1982
1983static int hci_create_cis_sync(struct hci_dev *hdev, void *data)
1984{
1985	return hci_le_create_cis_sync(hdev);
1986}
1987
1988int hci_le_create_cis_pending(struct hci_dev *hdev)
1989{
1990	struct hci_conn *conn;
1991	bool pending = false;
1992
1993	rcu_read_lock();
1994
1995	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
1996		if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) {
1997			rcu_read_unlock();
1998			return -EBUSY;
1999		}
2000
2001		if (!hci_conn_check_create_cis(conn))
2002			pending = true;
2003	}
2004
2005	rcu_read_unlock();
2006
2007	if (!pending)
2008		return 0;
2009
2010	/* Queue Create CIS */
2011	return hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
2012}
2013
2014static void hci_iso_qos_setup(struct hci_dev *hdev, struct hci_conn *conn,
2015			      struct bt_iso_io_qos *qos, __u8 phy)
2016{
2017	/* Only set MTU if PHY is enabled */
2018	if (!qos->sdu && qos->phy)
2019		qos->sdu = conn->mtu;
2020
2021	/* Use the same PHY as ACL if set to any */
2022	if (qos->phy == BT_ISO_PHY_ANY)
2023		qos->phy = phy;
2024
2025	/* Use LE ACL connection interval if not set */
2026	if (!qos->interval)
2027		/* ACL interval unit in 1.25 ms to us */
2028		qos->interval = conn->le_conn_interval * 1250;
2029
2030	/* Use LE ACL connection latency if not set */
2031	if (!qos->latency)
2032		qos->latency = conn->le_conn_latency;
2033}
2034
2035static int create_big_sync(struct hci_dev *hdev, void *data)
2036{
2037	struct hci_conn *conn = data;
2038	struct bt_iso_qos *qos = &conn->iso_qos;
2039	u16 interval, sync_interval = 0;
2040	u32 flags = 0;
2041	int err;
2042
2043	if (qos->bcast.out.phy == 0x02)
2044		flags |= MGMT_ADV_FLAG_SEC_2M;
2045
2046	/* Align intervals */
2047	interval = (qos->bcast.out.interval / 1250) * qos->bcast.sync_factor;
2048
2049	if (qos->bcast.bis)
2050		sync_interval = interval * 4;
2051
2052	err = hci_start_per_adv_sync(hdev, qos->bcast.bis, conn->le_per_adv_data_len,
2053				     conn->le_per_adv_data, flags, interval,
2054				     interval, sync_interval);
2055	if (err)
2056		return err;
2057
2058	return hci_le_create_big(conn, &conn->iso_qos);
2059}
2060
2061static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
2062{
2063	struct hci_cp_le_pa_create_sync *cp = data;
2064
2065	bt_dev_dbg(hdev, "");
2066
2067	if (err)
2068		bt_dev_err(hdev, "Unable to create PA: %d", err);
2069
2070	kfree(cp);
2071}
2072
2073static int create_pa_sync(struct hci_dev *hdev, void *data)
2074{
2075	struct hci_cp_le_pa_create_sync *cp = data;
2076	int err;
2077
2078	err = __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC,
2079				    sizeof(*cp), cp, HCI_CMD_TIMEOUT);
2080	if (err) {
2081		hci_dev_clear_flag(hdev, HCI_PA_SYNC);
2082		return err;
2083	}
2084
2085	return hci_update_passive_scan_sync(hdev);
2086}
2087
2088struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
2089				    __u8 dst_type, __u8 sid,
2090				    struct bt_iso_qos *qos)
2091{
2092	struct hci_cp_le_pa_create_sync *cp;
2093	struct hci_conn *conn;
2094	int err;
2095
2096	if (hci_dev_test_and_set_flag(hdev, HCI_PA_SYNC))
2097		return ERR_PTR(-EBUSY);
2098
2099	conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_SLAVE);
2100	if (IS_ERR(conn))
2101		return conn;
2102
2103	conn->iso_qos = *qos;
2104	conn->state = BT_LISTEN;
2105
2106	hci_conn_hold(conn);
2107
2108	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
2109	if (!cp) {
2110		hci_dev_clear_flag(hdev, HCI_PA_SYNC);
2111		hci_conn_drop(conn);
2112		return ERR_PTR(-ENOMEM);
2113	}
2114
2115	cp->options = qos->bcast.options;
2116	cp->sid = sid;
2117	cp->addr_type = dst_type;
2118	bacpy(&cp->addr, dst);
2119	cp->skip = cpu_to_le16(qos->bcast.skip);
2120	cp->sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
2121	cp->sync_cte_type = qos->bcast.sync_cte_type;
2122
2123	/* Queue start pa_create_sync and scan */
2124	err = hci_cmd_sync_queue(hdev, create_pa_sync, cp, create_pa_complete);
2125	if (err < 0) {
2126		hci_conn_drop(conn);
2127		kfree(cp);
2128		return ERR_PTR(err);
2129	}
2130
2131	return conn;
2132}
2133
2134int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
2135			   struct bt_iso_qos *qos,
2136			   __u16 sync_handle, __u8 num_bis, __u8 bis[])
2137{
2138	struct _packed {
2139		struct hci_cp_le_big_create_sync cp;
2140		__u8  bis[0x11];
2141	} pdu;
2142	int err;
2143
2144	if (num_bis < 0x01 || num_bis > sizeof(pdu.bis))
2145		return -EINVAL;
2146
2147	err = qos_set_big(hdev, qos);
2148	if (err)
2149		return err;
2150
2151	if (hcon)
2152		hcon->iso_qos.bcast.big = qos->bcast.big;
2153
2154	memset(&pdu, 0, sizeof(pdu));
2155	pdu.cp.handle = qos->bcast.big;
2156	pdu.cp.sync_handle = cpu_to_le16(sync_handle);
2157	pdu.cp.encryption = qos->bcast.encryption;
2158	memcpy(pdu.cp.bcode, qos->bcast.bcode, sizeof(pdu.cp.bcode));
2159	pdu.cp.mse = qos->bcast.mse;
2160	pdu.cp.timeout = cpu_to_le16(qos->bcast.timeout);
2161	pdu.cp.num_bis = num_bis;
2162	memcpy(pdu.bis, bis, num_bis);
2163
2164	return hci_send_cmd(hdev, HCI_OP_LE_BIG_CREATE_SYNC,
2165			    sizeof(pdu.cp) + num_bis, &pdu);
2166}
2167
2168static void create_big_complete(struct hci_dev *hdev, void *data, int err)
2169{
2170	struct hci_conn *conn = data;
2171
2172	bt_dev_dbg(hdev, "conn %p", conn);
2173
2174	if (err) {
2175		bt_dev_err(hdev, "Unable to create BIG: %d", err);
2176		hci_connect_cfm(conn, err);
2177		hci_conn_del(conn);
2178	}
2179}
2180
2181struct hci_conn *hci_bind_bis(struct hci_dev *hdev, bdaddr_t *dst,
2182			      struct bt_iso_qos *qos,
2183			      __u8 base_len, __u8 *base)
2184{
2185	struct hci_conn *conn;
2186	struct hci_conn *parent;
2187	__u8 eir[HCI_MAX_PER_AD_LENGTH];
2188	struct hci_link *link;
2189
2190	/* Look for any BIS that is open for rebinding */
2191	conn = hci_conn_hash_lookup_big_state(hdev, qos->bcast.big, BT_OPEN);
2192	if (conn) {
2193		memcpy(qos, &conn->iso_qos, sizeof(*qos));
2194		conn->state = BT_CONNECTED;
2195		return conn;
2196	}
2197
2198	if (base_len && base)
2199		base_len = eir_append_service_data(eir, 0,  0x1851,
2200						   base, base_len);
2201
2202	/* We need hci_conn object using the BDADDR_ANY as dst */
2203	conn = hci_add_bis(hdev, dst, qos, base_len, eir);
2204	if (IS_ERR(conn))
2205		return conn;
2206
2207	/* Update LINK PHYs according to QoS preference */
2208	conn->le_tx_phy = qos->bcast.out.phy;
2209	conn->le_tx_phy = qos->bcast.out.phy;
2210
2211	/* Add Basic Announcement into Peridic Adv Data if BASE is set */
2212	if (base_len && base) {
2213		memcpy(conn->le_per_adv_data,  eir, sizeof(eir));
2214		conn->le_per_adv_data_len = base_len;
2215	}
2216
2217	hci_iso_qos_setup(hdev, conn, &qos->bcast.out,
2218			  conn->le_tx_phy ? conn->le_tx_phy :
2219			  hdev->le_tx_def_phys);
2220
2221	conn->iso_qos = *qos;
2222	conn->state = BT_BOUND;
2223
2224	/* Link BISes together */
2225	parent = hci_conn_hash_lookup_big(hdev,
2226					  conn->iso_qos.bcast.big);
2227	if (parent && parent != conn) {
2228		link = hci_conn_link(parent, conn);
2229		if (!link) {
2230			hci_conn_drop(conn);
2231			return ERR_PTR(-ENOLINK);
2232		}
2233
2234		/* Link takes the refcount */
2235		hci_conn_drop(conn);
2236	}
2237
2238	return conn;
2239}
2240
2241static void bis_mark_per_adv(struct hci_conn *conn, void *data)
2242{
2243	struct iso_list_data *d = data;
2244
2245	/* Skip if not broadcast/ANY address */
2246	if (bacmp(&conn->dst, BDADDR_ANY))
2247		return;
2248
2249	if (d->big != conn->iso_qos.bcast.big ||
2250	    d->bis == BT_ISO_QOS_BIS_UNSET ||
2251	    d->bis != conn->iso_qos.bcast.bis)
2252		return;
2253
2254	set_bit(HCI_CONN_PER_ADV, &conn->flags);
2255}
2256
2257struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
2258				 __u8 dst_type, struct bt_iso_qos *qos,
2259				 __u8 base_len, __u8 *base)
2260{
2261	struct hci_conn *conn;
2262	int err;
2263	struct iso_list_data data;
2264
2265	conn = hci_bind_bis(hdev, dst, qos, base_len, base);
2266	if (IS_ERR(conn))
2267		return conn;
2268
2269	if (conn->state == BT_CONNECTED)
2270		return conn;
2271
2272	data.big = qos->bcast.big;
2273	data.bis = qos->bcast.bis;
2274
2275	/* Set HCI_CONN_PER_ADV for all bound connections, to mark that
2276	 * the start periodic advertising and create BIG commands have
2277	 * been queued
2278	 */
2279	hci_conn_hash_list_state(hdev, bis_mark_per_adv, ISO_LINK,
2280				 BT_BOUND, &data);
2281
2282	/* Queue start periodic advertising and create BIG */
2283	err = hci_cmd_sync_queue(hdev, create_big_sync, conn,
2284				 create_big_complete);
2285	if (err < 0) {
2286		hci_conn_drop(conn);
2287		return ERR_PTR(err);
2288	}
2289
2290	return conn;
2291}
2292
2293struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst,
2294				 __u8 dst_type, struct bt_iso_qos *qos)
2295{
2296	struct hci_conn *le;
2297	struct hci_conn *cis;
2298	struct hci_link *link;
2299
2300	if (hci_dev_test_flag(hdev, HCI_ADVERTISING))
2301		le = hci_connect_le(hdev, dst, dst_type, false,
2302				    BT_SECURITY_LOW,
2303				    HCI_LE_CONN_TIMEOUT,
2304				    HCI_ROLE_SLAVE, 0, 0);
2305	else
2306		le = hci_connect_le_scan(hdev, dst, dst_type,
2307					 BT_SECURITY_LOW,
2308					 HCI_LE_CONN_TIMEOUT,
2309					 CONN_REASON_ISO_CONNECT);
2310	if (IS_ERR(le))
2311		return le;
2312
2313	hci_iso_qos_setup(hdev, le, &qos->ucast.out,
2314			  le->le_tx_phy ? le->le_tx_phy : hdev->le_tx_def_phys);
2315	hci_iso_qos_setup(hdev, le, &qos->ucast.in,
2316			  le->le_rx_phy ? le->le_rx_phy : hdev->le_rx_def_phys);
2317
2318	cis = hci_bind_cis(hdev, dst, dst_type, qos);
2319	if (IS_ERR(cis)) {
2320		hci_conn_drop(le);
2321		return cis;
2322	}
2323
2324	link = hci_conn_link(le, cis);
2325	if (!link) {
2326		hci_conn_drop(le);
2327		hci_conn_drop(cis);
2328		return ERR_PTR(-ENOLINK);
2329	}
2330
2331	/* Link takes the refcount */
2332	hci_conn_drop(cis);
2333
2334	cis->state = BT_CONNECT;
2335
2336	hci_le_create_cis_pending(hdev);
2337
2338	return cis;
2339}
2340
2341/* Check link security requirement */
2342int hci_conn_check_link_mode(struct hci_conn *conn)
2343{
2344	BT_DBG("hcon %p", conn);
2345
2346	/* In Secure Connections Only mode, it is required that Secure
2347	 * Connections is used and the link is encrypted with AES-CCM
2348	 * using a P-256 authenticated combination key.
2349	 */
2350	if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
2351		if (!hci_conn_sc_enabled(conn) ||
2352		    !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
2353		    conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
2354			return 0;
2355	}
2356
2357	 /* AES encryption is required for Level 4:
2358	  *
2359	  * BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C
2360	  * page 1319:
2361	  *
2362	  * 128-bit equivalent strength for link and encryption keys
2363	  * required using FIPS approved algorithms (E0 not allowed,
2364	  * SAFER+ not allowed, and P-192 not allowed; encryption key
2365	  * not shortened)
2366	  */
2367	if (conn->sec_level == BT_SECURITY_FIPS &&
2368	    !test_bit(HCI_CONN_AES_CCM, &conn->flags)) {
2369		bt_dev_err(conn->hdev,
2370			   "Invalid security: Missing AES-CCM usage");
2371		return 0;
2372	}
2373
2374	if (hci_conn_ssp_enabled(conn) &&
2375	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
2376		return 0;
2377
2378	return 1;
2379}
2380
2381/* Authenticate remote device */
2382static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
2383{
2384	BT_DBG("hcon %p", conn);
2385
2386	if (conn->pending_sec_level > sec_level)
2387		sec_level = conn->pending_sec_level;
2388
2389	if (sec_level > conn->sec_level)
2390		conn->pending_sec_level = sec_level;
2391	else if (test_bit(HCI_CONN_AUTH, &conn->flags))
2392		return 1;
2393
2394	/* Make sure we preserve an existing MITM requirement*/
2395	auth_type |= (conn->auth_type & 0x01);
2396
2397	conn->auth_type = auth_type;
2398
2399	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
2400		struct hci_cp_auth_requested cp;
2401
2402		cp.handle = cpu_to_le16(conn->handle);
2403		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
2404			     sizeof(cp), &cp);
2405
2406		/* Set the ENCRYPT_PEND to trigger encryption after
2407		 * authentication.
2408		 */
2409		if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 
 
2410			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
2411	}
2412
2413	return 0;
2414}
2415
2416/* Encrypt the link */
2417static void hci_conn_encrypt(struct hci_conn *conn)
2418{
2419	BT_DBG("hcon %p", conn);
2420
2421	if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
2422		struct hci_cp_set_conn_encrypt cp;
2423		cp.handle  = cpu_to_le16(conn->handle);
2424		cp.encrypt = 0x01;
2425		hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
2426			     &cp);
2427	}
2428}
2429
2430/* Enable security */
2431int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
2432		      bool initiator)
2433{
2434	BT_DBG("hcon %p", conn);
2435
2436	if (conn->type == LE_LINK)
2437		return smp_conn_security(conn, sec_level);
2438
2439	/* For sdp we don't need the link key. */
2440	if (sec_level == BT_SECURITY_SDP)
2441		return 1;
2442
2443	/* For non 2.1 devices and low security level we don't need the link
2444	   key. */
2445	if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
2446		return 1;
2447
2448	/* For other security levels we need the link key. */
2449	if (!test_bit(HCI_CONN_AUTH, &conn->flags))
2450		goto auth;
2451
2452	switch (conn->key_type) {
2453	case HCI_LK_AUTH_COMBINATION_P256:
2454		/* An authenticated FIPS approved combination key has
2455		 * sufficient security for security level 4 or lower.
2456		 */
2457		if (sec_level <= BT_SECURITY_FIPS)
2458			goto encrypt;
2459		break;
2460	case HCI_LK_AUTH_COMBINATION_P192:
2461		/* An authenticated combination key has sufficient security for
2462		 * security level 3 or lower.
2463		 */
2464		if (sec_level <= BT_SECURITY_HIGH)
2465			goto encrypt;
2466		break;
2467	case HCI_LK_UNAUTH_COMBINATION_P192:
2468	case HCI_LK_UNAUTH_COMBINATION_P256:
2469		/* An unauthenticated combination key has sufficient security
2470		 * for security level 2 or lower.
2471		 */
2472		if (sec_level <= BT_SECURITY_MEDIUM)
2473			goto encrypt;
2474		break;
2475	case HCI_LK_COMBINATION:
2476		/* A combination key has always sufficient security for the
2477		 * security levels 2 or lower. High security level requires the
2478		 * combination key is generated using maximum PIN code length
2479		 * (16). For pre 2.1 units.
2480		 */
2481		if (sec_level <= BT_SECURITY_MEDIUM || conn->pin_length == 16)
2482			goto encrypt;
2483		break;
2484	default:
2485		break;
2486	}
2487
2488auth:
2489	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
2490		return 0;
2491
2492	if (initiator)
2493		set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
2494
2495	if (!hci_conn_auth(conn, sec_level, auth_type))
2496		return 0;
2497
2498encrypt:
2499	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
2500		/* Ensure that the encryption key size has been read,
2501		 * otherwise stall the upper layer responses.
2502		 */
2503		if (!conn->enc_key_size)
2504			return 0;
2505
2506		/* Nothing else needed, all requirements are met */
2507		return 1;
2508	}
2509
2510	hci_conn_encrypt(conn);
2511	return 0;
2512}
2513EXPORT_SYMBOL(hci_conn_security);
2514
2515/* Check secure link requirement */
2516int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
2517{
2518	BT_DBG("hcon %p", conn);
2519
2520	/* Accept if non-secure or higher security level is required */
2521	if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
2522		return 1;
2523
2524	/* Accept if secure or higher security level is already present */
2525	if (conn->sec_level == BT_SECURITY_HIGH ||
2526	    conn->sec_level == BT_SECURITY_FIPS)
2527		return 1;
2528
2529	/* Reject not secure link */
2530	return 0;
2531}
2532EXPORT_SYMBOL(hci_conn_check_secure);
2533
2534/* Switch role */
2535int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
2536{
2537	BT_DBG("hcon %p", conn);
2538
2539	if (role == conn->role)
2540		return 1;
2541
2542	if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
2543		struct hci_cp_switch_role cp;
2544		bacpy(&cp.bdaddr, &conn->dst);
2545		cp.role = role;
2546		hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
2547	}
2548
2549	return 0;
2550}
2551EXPORT_SYMBOL(hci_conn_switch_role);
2552
2553/* Enter active mode */
2554void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
2555{
2556	struct hci_dev *hdev = conn->hdev;
2557
2558	BT_DBG("hcon %p mode %d", conn, conn->mode);
2559
2560	if (conn->mode != HCI_CM_SNIFF)
2561		goto timer;
2562
2563	if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
2564		goto timer;
2565
2566	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
2567		struct hci_cp_exit_sniff_mode cp;
2568		cp.handle = cpu_to_le16(conn->handle);
2569		hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
2570	}
2571
2572timer:
2573	if (hdev->idle_timeout > 0)
2574		queue_delayed_work(hdev->workqueue, &conn->idle_work,
2575				   msecs_to_jiffies(hdev->idle_timeout));
2576}
2577
2578/* Drop all connection on the device */
2579void hci_conn_hash_flush(struct hci_dev *hdev)
2580{
2581	struct list_head *head = &hdev->conn_hash.list;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2582	struct hci_conn *conn;
2583
2584	BT_DBG("hdev %s", hdev->name);
2585
2586	/* We should not traverse the list here, because hci_conn_del
2587	 * can remove extra links, which may cause the list traversal
2588	 * to hit items that have already been released.
2589	 */
2590	while ((conn = list_first_entry_or_null(head,
2591						struct hci_conn,
2592						list)) != NULL) {
2593		conn->state = BT_CLOSED;
2594		hci_disconn_cfm(conn, HCI_ERROR_LOCAL_HOST_TERM);
2595		hci_conn_del(conn);
2596	}
2597}
2598
2599static u32 get_link_mode(struct hci_conn *conn)
2600{
2601	u32 link_mode = 0;
2602
2603	if (conn->role == HCI_ROLE_MASTER)
2604		link_mode |= HCI_LM_MASTER;
2605
2606	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
2607		link_mode |= HCI_LM_ENCRYPT;
2608
2609	if (test_bit(HCI_CONN_AUTH, &conn->flags))
2610		link_mode |= HCI_LM_AUTH;
2611
2612	if (test_bit(HCI_CONN_SECURE, &conn->flags))
2613		link_mode |= HCI_LM_SECURE;
2614
2615	if (test_bit(HCI_CONN_FIPS, &conn->flags))
2616		link_mode |= HCI_LM_FIPS;
2617
2618	return link_mode;
2619}
2620
2621int hci_get_conn_list(void __user *arg)
2622{
2623	struct hci_conn *c;
2624	struct hci_conn_list_req req, *cl;
2625	struct hci_conn_info *ci;
2626	struct hci_dev *hdev;
2627	int n = 0, size, err;
2628
2629	if (copy_from_user(&req, arg, sizeof(req)))
2630		return -EFAULT;
2631
2632	if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
2633		return -EINVAL;
2634
2635	size = sizeof(req) + req.conn_num * sizeof(*ci);
2636
2637	cl = kmalloc(size, GFP_KERNEL);
2638	if (!cl)
2639		return -ENOMEM;
2640
2641	hdev = hci_dev_get(req.dev_id);
2642	if (!hdev) {
2643		kfree(cl);
2644		return -ENODEV;
2645	}
2646
2647	ci = cl->conn_info;
2648
2649	hci_dev_lock(hdev);
2650	list_for_each_entry(c, &hdev->conn_hash.list, list) {
2651		bacpy(&(ci + n)->bdaddr, &c->dst);
2652		(ci + n)->handle = c->handle;
2653		(ci + n)->type  = c->type;
2654		(ci + n)->out   = c->out;
2655		(ci + n)->state = c->state;
2656		(ci + n)->link_mode = get_link_mode(c);
2657		if (++n >= req.conn_num)
2658			break;
2659	}
2660	hci_dev_unlock(hdev);
2661
2662	cl->dev_id = hdev->id;
2663	cl->conn_num = n;
2664	size = sizeof(req) + n * sizeof(*ci);
2665
2666	hci_dev_put(hdev);
2667
2668	err = copy_to_user(arg, cl, size);
2669	kfree(cl);
2670
2671	return err ? -EFAULT : 0;
2672}
2673
2674int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
2675{
2676	struct hci_conn_info_req req;
2677	struct hci_conn_info ci;
2678	struct hci_conn *conn;
2679	char __user *ptr = arg + sizeof(req);
2680
2681	if (copy_from_user(&req, arg, sizeof(req)))
2682		return -EFAULT;
2683
2684	hci_dev_lock(hdev);
2685	conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
2686	if (conn) {
2687		bacpy(&ci.bdaddr, &conn->dst);
2688		ci.handle = conn->handle;
2689		ci.type  = conn->type;
2690		ci.out   = conn->out;
2691		ci.state = conn->state;
2692		ci.link_mode = get_link_mode(conn);
2693	}
2694	hci_dev_unlock(hdev);
2695
2696	if (!conn)
2697		return -ENOENT;
2698
2699	return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
2700}
2701
2702int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
2703{
2704	struct hci_auth_info_req req;
2705	struct hci_conn *conn;
2706
2707	if (copy_from_user(&req, arg, sizeof(req)))
2708		return -EFAULT;
2709
2710	hci_dev_lock(hdev);
2711	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
2712	if (conn)
2713		req.type = conn->auth_type;
2714	hci_dev_unlock(hdev);
2715
2716	if (!conn)
2717		return -ENOENT;
2718
2719	return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
2720}
2721
2722struct hci_chan *hci_chan_create(struct hci_conn *conn)
2723{
2724	struct hci_dev *hdev = conn->hdev;
2725	struct hci_chan *chan;
2726
2727	BT_DBG("%s hcon %p", hdev->name, conn);
2728
2729	if (test_bit(HCI_CONN_DROP, &conn->flags)) {
2730		BT_DBG("Refusing to create new hci_chan");
2731		return NULL;
2732	}
2733
2734	chan = kzalloc(sizeof(*chan), GFP_KERNEL);
2735	if (!chan)
2736		return NULL;
2737
2738	chan->conn = hci_conn_get(conn);
2739	skb_queue_head_init(&chan->data_q);
2740	chan->state = BT_CONNECTED;
2741
2742	list_add_rcu(&chan->list, &conn->chan_list);
2743
2744	return chan;
2745}
2746
2747void hci_chan_del(struct hci_chan *chan)
2748{
2749	struct hci_conn *conn = chan->conn;
2750	struct hci_dev *hdev = conn->hdev;
2751
2752	BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
2753
2754	list_del_rcu(&chan->list);
2755
2756	synchronize_rcu();
2757
2758	/* Prevent new hci_chan's to be created for this hci_conn */
2759	set_bit(HCI_CONN_DROP, &conn->flags);
2760
2761	hci_conn_put(conn);
2762
2763	skb_queue_purge(&chan->data_q);
2764	kfree(chan);
2765}
2766
2767void hci_chan_list_flush(struct hci_conn *conn)
2768{
2769	struct hci_chan *chan, *n;
2770
2771	BT_DBG("hcon %p", conn);
2772
2773	list_for_each_entry_safe(chan, n, &conn->chan_list, list)
2774		hci_chan_del(chan);
2775}
2776
2777static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
2778						 __u16 handle)
2779{
2780	struct hci_chan *hchan;
2781
2782	list_for_each_entry(hchan, &hcon->chan_list, list) {
2783		if (hchan->handle == handle)
2784			return hchan;
2785	}
2786
2787	return NULL;
2788}
2789
2790struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
2791{
2792	struct hci_conn_hash *h = &hdev->conn_hash;
2793	struct hci_conn *hcon;
2794	struct hci_chan *hchan = NULL;
2795
2796	rcu_read_lock();
2797
2798	list_for_each_entry_rcu(hcon, &h->list, list) {
2799		hchan = __hci_chan_lookup_handle(hcon, handle);
2800		if (hchan)
2801			break;
2802	}
2803
2804	rcu_read_unlock();
2805
2806	return hchan;
2807}
2808
2809u32 hci_conn_get_phy(struct hci_conn *conn)
2810{
2811	u32 phys = 0;
2812
2813	/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
2814	 * Table 6.2: Packets defined for synchronous, asynchronous, and
2815	 * CPB logical transport types.
2816	 */
2817	switch (conn->type) {
2818	case SCO_LINK:
2819		/* SCO logical transport (1 Mb/s):
2820		 * HV1, HV2, HV3 and DV.
2821		 */
2822		phys |= BT_PHY_BR_1M_1SLOT;
2823
2824		break;
2825
2826	case ACL_LINK:
2827		/* ACL logical transport (1 Mb/s) ptt=0:
2828		 * DH1, DM3, DH3, DM5 and DH5.
2829		 */
2830		phys |= BT_PHY_BR_1M_1SLOT;
2831
2832		if (conn->pkt_type & (HCI_DM3 | HCI_DH3))
2833			phys |= BT_PHY_BR_1M_3SLOT;
2834
2835		if (conn->pkt_type & (HCI_DM5 | HCI_DH5))
2836			phys |= BT_PHY_BR_1M_5SLOT;
2837
2838		/* ACL logical transport (2 Mb/s) ptt=1:
2839		 * 2-DH1, 2-DH3 and 2-DH5.
2840		 */
2841		if (!(conn->pkt_type & HCI_2DH1))
2842			phys |= BT_PHY_EDR_2M_1SLOT;
2843
2844		if (!(conn->pkt_type & HCI_2DH3))
2845			phys |= BT_PHY_EDR_2M_3SLOT;
2846
2847		if (!(conn->pkt_type & HCI_2DH5))
2848			phys |= BT_PHY_EDR_2M_5SLOT;
2849
2850		/* ACL logical transport (3 Mb/s) ptt=1:
2851		 * 3-DH1, 3-DH3 and 3-DH5.
2852		 */
2853		if (!(conn->pkt_type & HCI_3DH1))
2854			phys |= BT_PHY_EDR_3M_1SLOT;
2855
2856		if (!(conn->pkt_type & HCI_3DH3))
2857			phys |= BT_PHY_EDR_3M_3SLOT;
2858
2859		if (!(conn->pkt_type & HCI_3DH5))
2860			phys |= BT_PHY_EDR_3M_5SLOT;
2861
2862		break;
2863
2864	case ESCO_LINK:
2865		/* eSCO logical transport (1 Mb/s): EV3, EV4 and EV5 */
2866		phys |= BT_PHY_BR_1M_1SLOT;
2867
2868		if (!(conn->pkt_type & (ESCO_EV4 | ESCO_EV5)))
2869			phys |= BT_PHY_BR_1M_3SLOT;
2870
2871		/* eSCO logical transport (2 Mb/s): 2-EV3, 2-EV5 */
2872		if (!(conn->pkt_type & ESCO_2EV3))
2873			phys |= BT_PHY_EDR_2M_1SLOT;
2874
2875		if (!(conn->pkt_type & ESCO_2EV5))
2876			phys |= BT_PHY_EDR_2M_3SLOT;
2877
2878		/* eSCO logical transport (3 Mb/s): 3-EV3, 3-EV5 */
2879		if (!(conn->pkt_type & ESCO_3EV3))
2880			phys |= BT_PHY_EDR_3M_1SLOT;
2881
2882		if (!(conn->pkt_type & ESCO_3EV5))
2883			phys |= BT_PHY_EDR_3M_3SLOT;
2884
2885		break;
2886
2887	case LE_LINK:
2888		if (conn->le_tx_phy & HCI_LE_SET_PHY_1M)
2889			phys |= BT_PHY_LE_1M_TX;
2890
2891		if (conn->le_rx_phy & HCI_LE_SET_PHY_1M)
2892			phys |= BT_PHY_LE_1M_RX;
2893
2894		if (conn->le_tx_phy & HCI_LE_SET_PHY_2M)
2895			phys |= BT_PHY_LE_2M_TX;
2896
2897		if (conn->le_rx_phy & HCI_LE_SET_PHY_2M)
2898			phys |= BT_PHY_LE_2M_RX;
2899
2900		if (conn->le_tx_phy & HCI_LE_SET_PHY_CODED)
2901			phys |= BT_PHY_LE_CODED_TX;
2902
2903		if (conn->le_rx_phy & HCI_LE_SET_PHY_CODED)
2904			phys |= BT_PHY_LE_CODED_RX;
2905
2906		break;
2907	}
2908
2909	return phys;
2910}
2911
2912static int abort_conn_sync(struct hci_dev *hdev, void *data)
2913{
2914	struct hci_conn *conn = data;
2915
2916	if (!hci_conn_valid(hdev, conn))
2917		return -ECANCELED;
2918
2919	return hci_abort_conn_sync(hdev, conn, conn->abort_reason);
2920}
2921
2922int hci_abort_conn(struct hci_conn *conn, u8 reason)
2923{
2924	struct hci_dev *hdev = conn->hdev;
2925
2926	/* If abort_reason has already been set it means the connection is
2927	 * already being aborted so don't attempt to overwrite it.
2928	 */
2929	if (conn->abort_reason)
2930		return 0;
2931
2932	bt_dev_dbg(hdev, "handle 0x%2.2x reason 0x%2.2x", conn->handle, reason);
2933
2934	conn->abort_reason = reason;
2935
2936	/* If the connection is pending check the command opcode since that
2937	 * might be blocking on hci_cmd_sync_work while waiting its respective
2938	 * event so we need to hci_cmd_sync_cancel to cancel it.
2939	 *
2940	 * hci_connect_le serializes the connection attempts so only one
2941	 * connection can be in BT_CONNECT at time.
2942	 */
2943	if (conn->state == BT_CONNECT && hdev->req_status == HCI_REQ_PEND) {
2944		switch (hci_skb_event(hdev->sent_cmd)) {
2945		case HCI_EV_CONN_COMPLETE:
2946		case HCI_EV_LE_CONN_COMPLETE:
2947		case HCI_EV_LE_ENHANCED_CONN_COMPLETE:
2948		case HCI_EVT_LE_CIS_ESTABLISHED:
2949			hci_cmd_sync_cancel(hdev, ECANCELED);
2950			break;
2951		}
2952	/* Cancel connect attempt if still queued/pending */
2953	} else if (!hci_cancel_connect_sync(hdev, conn)) {
2954		return 0;
2955	}
2956
2957	return hci_cmd_sync_queue_once(hdev, abort_conn_sync, conn, NULL);
2958}