Loading...
1/*
2 * USB ConnectTech WhiteHEAT driver
3 *
4 * Copyright (C) 2002
5 * Connect Tech Inc.
6 *
7 * Copyright (C) 1999 - 2001
8 * Greg Kroah-Hartman (greg@kroah.com)
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * See Documentation/usb/usb-serial.txt for more information on using this
16 * driver
17 */
18
19#include <linux/kernel.h>
20#include <linux/errno.h>
21#include <linux/slab.h>
22#include <linux/tty.h>
23#include <linux/tty_driver.h>
24#include <linux/tty_flip.h>
25#include <linux/module.h>
26#include <linux/spinlock.h>
27#include <linux/mutex.h>
28#include <linux/uaccess.h>
29#include <asm/termbits.h>
30#include <linux/usb.h>
31#include <linux/serial_reg.h>
32#include <linux/serial.h>
33#include <linux/usb/serial.h>
34#include <linux/usb/ezusb.h>
35#include "whiteheat.h" /* WhiteHEAT specific commands */
36
37#ifndef CMSPAR
38#define CMSPAR 0
39#endif
40
41/*
42 * Version Information
43 */
44#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
45#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
46
47#define CONNECT_TECH_VENDOR_ID 0x0710
48#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
49#define CONNECT_TECH_WHITE_HEAT_ID 0x8001
50
51/*
52 ID tables for whiteheat are unusual, because we want to different
53 things for different versions of the device. Eventually, this
54 will be doable from a single table. But, for now, we define two
55 separate ID tables, and then a third table that combines them
56 just for the purpose of exporting the autoloading information.
57*/
58static const struct usb_device_id id_table_std[] = {
59 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
60 { } /* Terminating entry */
61};
62
63static const struct usb_device_id id_table_prerenumeration[] = {
64 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
65 { } /* Terminating entry */
66};
67
68static const struct usb_device_id id_table_combined[] = {
69 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
70 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
71 { } /* Terminating entry */
72};
73
74MODULE_DEVICE_TABLE(usb, id_table_combined);
75
76
77/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
78static int whiteheat_firmware_download(struct usb_serial *serial,
79 const struct usb_device_id *id);
80static int whiteheat_firmware_attach(struct usb_serial *serial);
81
82/* function prototypes for the Connect Tech WhiteHEAT serial converter */
83static int whiteheat_probe(struct usb_serial *serial,
84 const struct usb_device_id *id);
85static int whiteheat_attach(struct usb_serial *serial);
86static void whiteheat_release(struct usb_serial *serial);
87static int whiteheat_port_probe(struct usb_serial_port *port);
88static int whiteheat_port_remove(struct usb_serial_port *port);
89static int whiteheat_open(struct tty_struct *tty,
90 struct usb_serial_port *port);
91static void whiteheat_close(struct usb_serial_port *port);
92static int whiteheat_ioctl(struct tty_struct *tty,
93 unsigned int cmd, unsigned long arg);
94static void whiteheat_set_termios(struct tty_struct *tty,
95 struct usb_serial_port *port, struct ktermios *old);
96static int whiteheat_tiocmget(struct tty_struct *tty);
97static int whiteheat_tiocmset(struct tty_struct *tty,
98 unsigned int set, unsigned int clear);
99static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
100
101static struct usb_serial_driver whiteheat_fake_device = {
102 .driver = {
103 .owner = THIS_MODULE,
104 .name = "whiteheatnofirm",
105 },
106 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
107 .id_table = id_table_prerenumeration,
108 .num_ports = 1,
109 .probe = whiteheat_firmware_download,
110 .attach = whiteheat_firmware_attach,
111};
112
113static struct usb_serial_driver whiteheat_device = {
114 .driver = {
115 .owner = THIS_MODULE,
116 .name = "whiteheat",
117 },
118 .description = "Connect Tech - WhiteHEAT",
119 .id_table = id_table_std,
120 .num_ports = 4,
121 .probe = whiteheat_probe,
122 .attach = whiteheat_attach,
123 .release = whiteheat_release,
124 .port_probe = whiteheat_port_probe,
125 .port_remove = whiteheat_port_remove,
126 .open = whiteheat_open,
127 .close = whiteheat_close,
128 .ioctl = whiteheat_ioctl,
129 .set_termios = whiteheat_set_termios,
130 .break_ctl = whiteheat_break_ctl,
131 .tiocmget = whiteheat_tiocmget,
132 .tiocmset = whiteheat_tiocmset,
133 .throttle = usb_serial_generic_throttle,
134 .unthrottle = usb_serial_generic_unthrottle,
135};
136
137static struct usb_serial_driver * const serial_drivers[] = {
138 &whiteheat_fake_device, &whiteheat_device, NULL
139};
140
141struct whiteheat_command_private {
142 struct mutex mutex;
143 __u8 port_running;
144 __u8 command_finished;
145 wait_queue_head_t wait_command; /* for handling sleeping whilst
146 waiting for a command to
147 finish */
148 __u8 result_buffer[64];
149};
150
151struct whiteheat_private {
152 __u8 mcr; /* FIXME: no locking on mcr */
153};
154
155
156/* local function prototypes */
157static int start_command_port(struct usb_serial *serial);
158static void stop_command_port(struct usb_serial *serial);
159static void command_port_write_callback(struct urb *urb);
160static void command_port_read_callback(struct urb *urb);
161
162static int firm_send_command(struct usb_serial_port *port, __u8 command,
163 __u8 *data, __u8 datasize);
164static int firm_open(struct usb_serial_port *port);
165static int firm_close(struct usb_serial_port *port);
166static void firm_setup_port(struct tty_struct *tty);
167static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
168static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
169static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
170static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
171static int firm_get_dtr_rts(struct usb_serial_port *port);
172static int firm_report_tx_done(struct usb_serial_port *port);
173
174
175#define COMMAND_PORT 4
176#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
177#define COMMAND_TIMEOUT_MS 2000
178#define CLOSING_DELAY (30 * HZ)
179
180
181/*****************************************************************************
182 * Connect Tech's White Heat prerenumeration driver functions
183 *****************************************************************************/
184
185/* steps to download the firmware to the WhiteHEAT device:
186 - hold the reset (by writing to the reset bit of the CPUCS register)
187 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
188 - release the reset (by writing to the CPUCS register)
189 - download the WH.HEX file for all addresses greater than 0x1b3f using
190 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
191 - hold the reset
192 - download the WH.HEX file for all addresses less than 0x1b40 using
193 VENDOR_REQUEST_ANCHOR_LOAD
194 - release the reset
195 - device renumerated itself and comes up as new device id with all
196 firmware download completed.
197*/
198static int whiteheat_firmware_download(struct usb_serial *serial,
199 const struct usb_device_id *id)
200{
201 int response;
202
203 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
204 if (response >= 0) {
205 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
206 if (response >= 0)
207 return 0;
208 }
209 return -ENOENT;
210}
211
212
213static int whiteheat_firmware_attach(struct usb_serial *serial)
214{
215 /* We want this device to fail to have a driver assigned to it */
216 return 1;
217}
218
219
220/*****************************************************************************
221 * Connect Tech's White Heat serial driver functions
222 *****************************************************************************/
223
224static int whiteheat_probe(struct usb_serial *serial,
225 const struct usb_device_id *id)
226{
227 struct usb_host_interface *iface_desc;
228 struct usb_endpoint_descriptor *endpoint;
229 size_t num_bulk_in = 0;
230 size_t num_bulk_out = 0;
231 size_t min_num_bulk;
232 unsigned int i;
233
234 iface_desc = serial->interface->cur_altsetting;
235
236 for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
237 endpoint = &iface_desc->endpoint[i].desc;
238 if (usb_endpoint_is_bulk_in(endpoint))
239 ++num_bulk_in;
240 if (usb_endpoint_is_bulk_out(endpoint))
241 ++num_bulk_out;
242 }
243
244 min_num_bulk = COMMAND_PORT + 1;
245 if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
246 return -ENODEV;
247
248 return 0;
249}
250
251static int whiteheat_attach(struct usb_serial *serial)
252{
253 struct usb_serial_port *command_port;
254 struct whiteheat_command_private *command_info;
255 struct whiteheat_hw_info *hw_info;
256 int pipe;
257 int ret;
258 int alen;
259 __u8 *command;
260 __u8 *result;
261
262 command_port = serial->port[COMMAND_PORT];
263
264 pipe = usb_sndbulkpipe(serial->dev,
265 command_port->bulk_out_endpointAddress);
266 command = kmalloc(2, GFP_KERNEL);
267 if (!command)
268 goto no_command_buffer;
269 command[0] = WHITEHEAT_GET_HW_INFO;
270 command[1] = 0;
271
272 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
273 if (!result)
274 goto no_result_buffer;
275 /*
276 * When the module is reloaded the firmware is still there and
277 * the endpoints are still in the usb core unchanged. This is the
278 * unlinking bug in disguise. Same for the call below.
279 */
280 usb_clear_halt(serial->dev, pipe);
281 ret = usb_bulk_msg(serial->dev, pipe, command, 2,
282 &alen, COMMAND_TIMEOUT_MS);
283 if (ret) {
284 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
285 serial->type->description, ret);
286 goto no_firmware;
287 } else if (alen != 2) {
288 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
289 serial->type->description, alen);
290 goto no_firmware;
291 }
292
293 pipe = usb_rcvbulkpipe(serial->dev,
294 command_port->bulk_in_endpointAddress);
295 /* See the comment on the usb_clear_halt() above */
296 usb_clear_halt(serial->dev, pipe);
297 ret = usb_bulk_msg(serial->dev, pipe, result,
298 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
299 if (ret) {
300 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
301 serial->type->description, ret);
302 goto no_firmware;
303 } else if (alen != sizeof(*hw_info) + 1) {
304 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
305 serial->type->description, alen);
306 goto no_firmware;
307 } else if (result[0] != command[0]) {
308 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
309 serial->type->description, result[0]);
310 goto no_firmware;
311 }
312
313 hw_info = (struct whiteheat_hw_info *)&result[1];
314
315 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
316 serial->type->description,
317 hw_info->sw_major_rev, hw_info->sw_minor_rev);
318
319 command_info = kmalloc(sizeof(struct whiteheat_command_private),
320 GFP_KERNEL);
321 if (!command_info)
322 goto no_command_private;
323
324 mutex_init(&command_info->mutex);
325 command_info->port_running = 0;
326 init_waitqueue_head(&command_info->wait_command);
327 usb_set_serial_port_data(command_port, command_info);
328 command_port->write_urb->complete = command_port_write_callback;
329 command_port->read_urb->complete = command_port_read_callback;
330 kfree(result);
331 kfree(command);
332
333 return 0;
334
335no_firmware:
336 /* Firmware likely not running */
337 dev_err(&serial->dev->dev,
338 "%s: Unable to retrieve firmware version, try replugging\n",
339 serial->type->description);
340 dev_err(&serial->dev->dev,
341 "%s: If the firmware is not running (status led not blinking)\n",
342 serial->type->description);
343 dev_err(&serial->dev->dev,
344 "%s: please contact support@connecttech.com\n",
345 serial->type->description);
346 kfree(result);
347 kfree(command);
348 return -ENODEV;
349
350no_command_private:
351 kfree(result);
352no_result_buffer:
353 kfree(command);
354no_command_buffer:
355 return -ENOMEM;
356}
357
358static void whiteheat_release(struct usb_serial *serial)
359{
360 struct usb_serial_port *command_port;
361
362 /* free up our private data for our command port */
363 command_port = serial->port[COMMAND_PORT];
364 kfree(usb_get_serial_port_data(command_port));
365}
366
367static int whiteheat_port_probe(struct usb_serial_port *port)
368{
369 struct whiteheat_private *info;
370
371 info = kzalloc(sizeof(*info), GFP_KERNEL);
372 if (!info)
373 return -ENOMEM;
374
375 usb_set_serial_port_data(port, info);
376
377 return 0;
378}
379
380static int whiteheat_port_remove(struct usb_serial_port *port)
381{
382 struct whiteheat_private *info;
383
384 info = usb_get_serial_port_data(port);
385 kfree(info);
386
387 return 0;
388}
389
390static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
391{
392 int retval;
393
394 retval = start_command_port(port->serial);
395 if (retval)
396 goto exit;
397
398 /* send an open port command */
399 retval = firm_open(port);
400 if (retval) {
401 stop_command_port(port->serial);
402 goto exit;
403 }
404
405 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
406 if (retval) {
407 firm_close(port);
408 stop_command_port(port->serial);
409 goto exit;
410 }
411
412 if (tty)
413 firm_setup_port(tty);
414
415 /* Work around HCD bugs */
416 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
417 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
418
419 retval = usb_serial_generic_open(tty, port);
420 if (retval) {
421 firm_close(port);
422 stop_command_port(port->serial);
423 goto exit;
424 }
425exit:
426 return retval;
427}
428
429
430static void whiteheat_close(struct usb_serial_port *port)
431{
432 firm_report_tx_done(port);
433 firm_close(port);
434
435 usb_serial_generic_close(port);
436
437 stop_command_port(port->serial);
438}
439
440static int whiteheat_tiocmget(struct tty_struct *tty)
441{
442 struct usb_serial_port *port = tty->driver_data;
443 struct whiteheat_private *info = usb_get_serial_port_data(port);
444 unsigned int modem_signals = 0;
445
446 firm_get_dtr_rts(port);
447 if (info->mcr & UART_MCR_DTR)
448 modem_signals |= TIOCM_DTR;
449 if (info->mcr & UART_MCR_RTS)
450 modem_signals |= TIOCM_RTS;
451
452 return modem_signals;
453}
454
455static int whiteheat_tiocmset(struct tty_struct *tty,
456 unsigned int set, unsigned int clear)
457{
458 struct usb_serial_port *port = tty->driver_data;
459 struct whiteheat_private *info = usb_get_serial_port_data(port);
460
461 if (set & TIOCM_RTS)
462 info->mcr |= UART_MCR_RTS;
463 if (set & TIOCM_DTR)
464 info->mcr |= UART_MCR_DTR;
465
466 if (clear & TIOCM_RTS)
467 info->mcr &= ~UART_MCR_RTS;
468 if (clear & TIOCM_DTR)
469 info->mcr &= ~UART_MCR_DTR;
470
471 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
472 firm_set_rts(port, info->mcr & UART_MCR_RTS);
473 return 0;
474}
475
476
477static int whiteheat_ioctl(struct tty_struct *tty,
478 unsigned int cmd, unsigned long arg)
479{
480 struct usb_serial_port *port = tty->driver_data;
481 struct serial_struct serstruct;
482 void __user *user_arg = (void __user *)arg;
483
484 switch (cmd) {
485 case TIOCGSERIAL:
486 memset(&serstruct, 0, sizeof(serstruct));
487 serstruct.type = PORT_16654;
488 serstruct.line = port->minor;
489 serstruct.port = port->port_number;
490 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
491 serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo);
492 serstruct.custom_divisor = 0;
493 serstruct.baud_base = 460800;
494 serstruct.close_delay = CLOSING_DELAY;
495 serstruct.closing_wait = CLOSING_DELAY;
496
497 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
498 return -EFAULT;
499 break;
500 default:
501 break;
502 }
503
504 return -ENOIOCTLCMD;
505}
506
507
508static void whiteheat_set_termios(struct tty_struct *tty,
509 struct usb_serial_port *port, struct ktermios *old_termios)
510{
511 firm_setup_port(tty);
512}
513
514static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
515{
516 struct usb_serial_port *port = tty->driver_data;
517 firm_set_break(port, break_state);
518}
519
520
521/*****************************************************************************
522 * Connect Tech's White Heat callback routines
523 *****************************************************************************/
524static void command_port_write_callback(struct urb *urb)
525{
526 int status = urb->status;
527
528 if (status) {
529 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
530 return;
531 }
532}
533
534
535static void command_port_read_callback(struct urb *urb)
536{
537 struct usb_serial_port *command_port = urb->context;
538 struct whiteheat_command_private *command_info;
539 int status = urb->status;
540 unsigned char *data = urb->transfer_buffer;
541 int result;
542
543 command_info = usb_get_serial_port_data(command_port);
544 if (!command_info) {
545 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
546 return;
547 }
548 if (!urb->actual_length) {
549 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
550 return;
551 }
552 if (status) {
553 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
554 if (status != -ENOENT)
555 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
556 wake_up(&command_info->wait_command);
557 return;
558 }
559
560 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
561
562 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
563 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
564 wake_up(&command_info->wait_command);
565 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
566 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
567 wake_up(&command_info->wait_command);
568 } else if (data[0] == WHITEHEAT_EVENT) {
569 /* These are unsolicited reports from the firmware, hence no
570 waiting command to wakeup */
571 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
572 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
573 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
574 memcpy(command_info->result_buffer, &data[1],
575 urb->actual_length - 1);
576 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
577 wake_up(&command_info->wait_command);
578 } else
579 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
580
581 /* Continue trying to always read */
582 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
583 if (result)
584 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
585 __func__, result);
586}
587
588
589/*****************************************************************************
590 * Connect Tech's White Heat firmware interface
591 *****************************************************************************/
592static int firm_send_command(struct usb_serial_port *port, __u8 command,
593 __u8 *data, __u8 datasize)
594{
595 struct usb_serial_port *command_port;
596 struct whiteheat_command_private *command_info;
597 struct whiteheat_private *info;
598 struct device *dev = &port->dev;
599 __u8 *transfer_buffer;
600 int retval = 0;
601 int t;
602
603 dev_dbg(dev, "%s - command %d\n", __func__, command);
604
605 command_port = port->serial->port[COMMAND_PORT];
606 command_info = usb_get_serial_port_data(command_port);
607 mutex_lock(&command_info->mutex);
608 command_info->command_finished = false;
609
610 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
611 transfer_buffer[0] = command;
612 memcpy(&transfer_buffer[1], data, datasize);
613 command_port->write_urb->transfer_buffer_length = datasize + 1;
614 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
615 if (retval) {
616 dev_dbg(dev, "%s - submit urb failed\n", __func__);
617 goto exit;
618 }
619
620 /* wait for the command to complete */
621 t = wait_event_timeout(command_info->wait_command,
622 (bool)command_info->command_finished, COMMAND_TIMEOUT);
623 if (!t)
624 usb_kill_urb(command_port->write_urb);
625
626 if (command_info->command_finished == false) {
627 dev_dbg(dev, "%s - command timed out.\n", __func__);
628 retval = -ETIMEDOUT;
629 goto exit;
630 }
631
632 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
633 dev_dbg(dev, "%s - command failed.\n", __func__);
634 retval = -EIO;
635 goto exit;
636 }
637
638 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
639 dev_dbg(dev, "%s - command completed.\n", __func__);
640 switch (command) {
641 case WHITEHEAT_GET_DTR_RTS:
642 info = usb_get_serial_port_data(port);
643 memcpy(&info->mcr, command_info->result_buffer,
644 sizeof(struct whiteheat_dr_info));
645 break;
646 }
647 }
648exit:
649 mutex_unlock(&command_info->mutex);
650 return retval;
651}
652
653
654static int firm_open(struct usb_serial_port *port)
655{
656 struct whiteheat_simple open_command;
657
658 open_command.port = port->port_number + 1;
659 return firm_send_command(port, WHITEHEAT_OPEN,
660 (__u8 *)&open_command, sizeof(open_command));
661}
662
663
664static int firm_close(struct usb_serial_port *port)
665{
666 struct whiteheat_simple close_command;
667
668 close_command.port = port->port_number + 1;
669 return firm_send_command(port, WHITEHEAT_CLOSE,
670 (__u8 *)&close_command, sizeof(close_command));
671}
672
673
674static void firm_setup_port(struct tty_struct *tty)
675{
676 struct usb_serial_port *port = tty->driver_data;
677 struct device *dev = &port->dev;
678 struct whiteheat_port_settings port_settings;
679 unsigned int cflag = tty->termios.c_cflag;
680
681 port_settings.port = port->port_number + 1;
682
683 /* get the byte size */
684 switch (cflag & CSIZE) {
685 case CS5: port_settings.bits = 5; break;
686 case CS6: port_settings.bits = 6; break;
687 case CS7: port_settings.bits = 7; break;
688 default:
689 case CS8: port_settings.bits = 8; break;
690 }
691 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
692
693 /* determine the parity */
694 if (cflag & PARENB)
695 if (cflag & CMSPAR)
696 if (cflag & PARODD)
697 port_settings.parity = WHITEHEAT_PAR_MARK;
698 else
699 port_settings.parity = WHITEHEAT_PAR_SPACE;
700 else
701 if (cflag & PARODD)
702 port_settings.parity = WHITEHEAT_PAR_ODD;
703 else
704 port_settings.parity = WHITEHEAT_PAR_EVEN;
705 else
706 port_settings.parity = WHITEHEAT_PAR_NONE;
707 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
708
709 /* figure out the stop bits requested */
710 if (cflag & CSTOPB)
711 port_settings.stop = 2;
712 else
713 port_settings.stop = 1;
714 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
715
716 /* figure out the flow control settings */
717 if (cflag & CRTSCTS)
718 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
719 WHITEHEAT_HFLOW_RTS);
720 else
721 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
722 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
723 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
724 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
725 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
726 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
727
728 /* determine software flow control */
729 if (I_IXOFF(tty))
730 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
731 else
732 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
733 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
734
735 port_settings.xon = START_CHAR(tty);
736 port_settings.xoff = STOP_CHAR(tty);
737 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
738
739 /* get the baud rate wanted */
740 port_settings.baud = tty_get_baud_rate(tty);
741 dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud);
742
743 /* fixme: should set validated settings */
744 tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
745 /* handle any settings that aren't specified in the tty structure */
746 port_settings.lloop = 0;
747
748 /* now send the message to the device */
749 firm_send_command(port, WHITEHEAT_SETUP_PORT,
750 (__u8 *)&port_settings, sizeof(port_settings));
751}
752
753
754static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
755{
756 struct whiteheat_set_rdb rts_command;
757
758 rts_command.port = port->port_number + 1;
759 rts_command.state = onoff;
760 return firm_send_command(port, WHITEHEAT_SET_RTS,
761 (__u8 *)&rts_command, sizeof(rts_command));
762}
763
764
765static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
766{
767 struct whiteheat_set_rdb dtr_command;
768
769 dtr_command.port = port->port_number + 1;
770 dtr_command.state = onoff;
771 return firm_send_command(port, WHITEHEAT_SET_DTR,
772 (__u8 *)&dtr_command, sizeof(dtr_command));
773}
774
775
776static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
777{
778 struct whiteheat_set_rdb break_command;
779
780 break_command.port = port->port_number + 1;
781 break_command.state = onoff;
782 return firm_send_command(port, WHITEHEAT_SET_BREAK,
783 (__u8 *)&break_command, sizeof(break_command));
784}
785
786
787static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
788{
789 struct whiteheat_purge purge_command;
790
791 purge_command.port = port->port_number + 1;
792 purge_command.what = rxtx;
793 return firm_send_command(port, WHITEHEAT_PURGE,
794 (__u8 *)&purge_command, sizeof(purge_command));
795}
796
797
798static int firm_get_dtr_rts(struct usb_serial_port *port)
799{
800 struct whiteheat_simple get_dr_command;
801
802 get_dr_command.port = port->port_number + 1;
803 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
804 (__u8 *)&get_dr_command, sizeof(get_dr_command));
805}
806
807
808static int firm_report_tx_done(struct usb_serial_port *port)
809{
810 struct whiteheat_simple close_command;
811
812 close_command.port = port->port_number + 1;
813 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
814 (__u8 *)&close_command, sizeof(close_command));
815}
816
817
818/*****************************************************************************
819 * Connect Tech's White Heat utility functions
820 *****************************************************************************/
821static int start_command_port(struct usb_serial *serial)
822{
823 struct usb_serial_port *command_port;
824 struct whiteheat_command_private *command_info;
825 int retval = 0;
826
827 command_port = serial->port[COMMAND_PORT];
828 command_info = usb_get_serial_port_data(command_port);
829 mutex_lock(&command_info->mutex);
830 if (!command_info->port_running) {
831 /* Work around HCD bugs */
832 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
833
834 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
835 if (retval) {
836 dev_err(&serial->dev->dev,
837 "%s - failed submitting read urb, error %d\n",
838 __func__, retval);
839 goto exit;
840 }
841 }
842 command_info->port_running++;
843
844exit:
845 mutex_unlock(&command_info->mutex);
846 return retval;
847}
848
849
850static void stop_command_port(struct usb_serial *serial)
851{
852 struct usb_serial_port *command_port;
853 struct whiteheat_command_private *command_info;
854
855 command_port = serial->port[COMMAND_PORT];
856 command_info = usb_get_serial_port_data(command_port);
857 mutex_lock(&command_info->mutex);
858 command_info->port_running--;
859 if (!command_info->port_running)
860 usb_kill_urb(command_port->read_urb);
861 mutex_unlock(&command_info->mutex);
862}
863
864module_usb_serial_driver(serial_drivers, id_table_combined);
865
866MODULE_AUTHOR(DRIVER_AUTHOR);
867MODULE_DESCRIPTION(DRIVER_DESC);
868MODULE_LICENSE("GPL");
869
870MODULE_FIRMWARE("whiteheat.fw");
871MODULE_FIRMWARE("whiteheat_loader.fw");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * USB ConnectTech WhiteHEAT driver
4 *
5 * Copyright (C) 2002
6 * Connect Tech Inc.
7 *
8 * Copyright (C) 1999 - 2001
9 * Greg Kroah-Hartman (greg@kroah.com)
10 *
11 * See Documentation/usb/usb-serial.rst for more information on using this
12 * driver
13 */
14
15#include <linux/kernel.h>
16#include <linux/errno.h>
17#include <linux/slab.h>
18#include <linux/tty.h>
19#include <linux/tty_driver.h>
20#include <linux/tty_flip.h>
21#include <linux/module.h>
22#include <linux/spinlock.h>
23#include <linux/mutex.h>
24#include <linux/uaccess.h>
25#include <asm/termbits.h>
26#include <linux/usb.h>
27#include <linux/serial_reg.h>
28#include <linux/serial.h>
29#include <linux/usb/serial.h>
30#include <linux/usb/ezusb.h>
31#include "whiteheat.h" /* WhiteHEAT specific commands */
32
33/*
34 * Version Information
35 */
36#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
37#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
38
39#define CONNECT_TECH_VENDOR_ID 0x0710
40#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
41#define CONNECT_TECH_WHITE_HEAT_ID 0x8001
42
43/*
44 ID tables for whiteheat are unusual, because we want to different
45 things for different versions of the device. Eventually, this
46 will be doable from a single table. But, for now, we define two
47 separate ID tables, and then a third table that combines them
48 just for the purpose of exporting the autoloading information.
49*/
50static const struct usb_device_id id_table_std[] = {
51 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
52 { } /* Terminating entry */
53};
54
55static const struct usb_device_id id_table_prerenumeration[] = {
56 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
57 { } /* Terminating entry */
58};
59
60static const struct usb_device_id id_table_combined[] = {
61 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
62 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
63 { } /* Terminating entry */
64};
65
66MODULE_DEVICE_TABLE(usb, id_table_combined);
67
68
69/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
70static int whiteheat_firmware_download(struct usb_serial *serial,
71 const struct usb_device_id *id);
72static int whiteheat_firmware_attach(struct usb_serial *serial);
73
74/* function prototypes for the Connect Tech WhiteHEAT serial converter */
75static int whiteheat_attach(struct usb_serial *serial);
76static void whiteheat_release(struct usb_serial *serial);
77static int whiteheat_port_probe(struct usb_serial_port *port);
78static void whiteheat_port_remove(struct usb_serial_port *port);
79static int whiteheat_open(struct tty_struct *tty,
80 struct usb_serial_port *port);
81static void whiteheat_close(struct usb_serial_port *port);
82static void whiteheat_get_serial(struct tty_struct *tty,
83 struct serial_struct *ss);
84static void whiteheat_set_termios(struct tty_struct *tty,
85 struct usb_serial_port *port,
86 const struct ktermios *old_termios);
87static int whiteheat_tiocmget(struct tty_struct *tty);
88static int whiteheat_tiocmset(struct tty_struct *tty,
89 unsigned int set, unsigned int clear);
90static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
91
92static struct usb_serial_driver whiteheat_fake_device = {
93 .driver = {
94 .owner = THIS_MODULE,
95 .name = "whiteheatnofirm",
96 },
97 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
98 .id_table = id_table_prerenumeration,
99 .num_ports = 1,
100 .probe = whiteheat_firmware_download,
101 .attach = whiteheat_firmware_attach,
102};
103
104static struct usb_serial_driver whiteheat_device = {
105 .driver = {
106 .owner = THIS_MODULE,
107 .name = "whiteheat",
108 },
109 .description = "Connect Tech - WhiteHEAT",
110 .id_table = id_table_std,
111 .num_ports = 4,
112 .num_bulk_in = 5,
113 .num_bulk_out = 5,
114 .attach = whiteheat_attach,
115 .release = whiteheat_release,
116 .port_probe = whiteheat_port_probe,
117 .port_remove = whiteheat_port_remove,
118 .open = whiteheat_open,
119 .close = whiteheat_close,
120 .get_serial = whiteheat_get_serial,
121 .set_termios = whiteheat_set_termios,
122 .break_ctl = whiteheat_break_ctl,
123 .tiocmget = whiteheat_tiocmget,
124 .tiocmset = whiteheat_tiocmset,
125 .throttle = usb_serial_generic_throttle,
126 .unthrottle = usb_serial_generic_unthrottle,
127};
128
129static struct usb_serial_driver * const serial_drivers[] = {
130 &whiteheat_fake_device, &whiteheat_device, NULL
131};
132
133struct whiteheat_command_private {
134 struct mutex mutex;
135 __u8 port_running;
136 __u8 command_finished;
137 wait_queue_head_t wait_command; /* for handling sleeping whilst
138 waiting for a command to
139 finish */
140 __u8 result_buffer[64];
141};
142
143struct whiteheat_private {
144 __u8 mcr; /* FIXME: no locking on mcr */
145};
146
147
148/* local function prototypes */
149static int start_command_port(struct usb_serial *serial);
150static void stop_command_port(struct usb_serial *serial);
151static void command_port_write_callback(struct urb *urb);
152static void command_port_read_callback(struct urb *urb);
153
154static int firm_send_command(struct usb_serial_port *port, __u8 command,
155 __u8 *data, __u8 datasize);
156static int firm_open(struct usb_serial_port *port);
157static int firm_close(struct usb_serial_port *port);
158static void firm_setup_port(struct tty_struct *tty);
159static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
160static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
161static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
162static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
163static int firm_get_dtr_rts(struct usb_serial_port *port);
164static int firm_report_tx_done(struct usb_serial_port *port);
165
166
167#define COMMAND_PORT 4
168#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
169#define COMMAND_TIMEOUT_MS 2000
170
171
172/*****************************************************************************
173 * Connect Tech's White Heat prerenumeration driver functions
174 *****************************************************************************/
175
176/* steps to download the firmware to the WhiteHEAT device:
177 - hold the reset (by writing to the reset bit of the CPUCS register)
178 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
179 - release the reset (by writing to the CPUCS register)
180 - download the WH.HEX file for all addresses greater than 0x1b3f using
181 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
182 - hold the reset
183 - download the WH.HEX file for all addresses less than 0x1b40 using
184 VENDOR_REQUEST_ANCHOR_LOAD
185 - release the reset
186 - device renumerated itself and comes up as new device id with all
187 firmware download completed.
188*/
189static int whiteheat_firmware_download(struct usb_serial *serial,
190 const struct usb_device_id *id)
191{
192 int response;
193
194 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
195 if (response >= 0) {
196 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
197 if (response >= 0)
198 return 0;
199 }
200 return -ENOENT;
201}
202
203
204static int whiteheat_firmware_attach(struct usb_serial *serial)
205{
206 /* We want this device to fail to have a driver assigned to it */
207 return 1;
208}
209
210
211/*****************************************************************************
212 * Connect Tech's White Heat serial driver functions
213 *****************************************************************************/
214
215static int whiteheat_attach(struct usb_serial *serial)
216{
217 struct usb_serial_port *command_port;
218 struct whiteheat_command_private *command_info;
219 struct whiteheat_hw_info *hw_info;
220 int pipe;
221 int ret;
222 int alen;
223 __u8 *command;
224 __u8 *result;
225
226 command_port = serial->port[COMMAND_PORT];
227
228 pipe = usb_sndbulkpipe(serial->dev,
229 command_port->bulk_out_endpointAddress);
230 command = kmalloc(2, GFP_KERNEL);
231 if (!command)
232 goto no_command_buffer;
233 command[0] = WHITEHEAT_GET_HW_INFO;
234 command[1] = 0;
235
236 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
237 if (!result)
238 goto no_result_buffer;
239 /*
240 * When the module is reloaded the firmware is still there and
241 * the endpoints are still in the usb core unchanged. This is the
242 * unlinking bug in disguise. Same for the call below.
243 */
244 usb_clear_halt(serial->dev, pipe);
245 ret = usb_bulk_msg(serial->dev, pipe, command, 2,
246 &alen, COMMAND_TIMEOUT_MS);
247 if (ret) {
248 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
249 serial->type->description, ret);
250 goto no_firmware;
251 } else if (alen != 2) {
252 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
253 serial->type->description, alen);
254 goto no_firmware;
255 }
256
257 pipe = usb_rcvbulkpipe(serial->dev,
258 command_port->bulk_in_endpointAddress);
259 /* See the comment on the usb_clear_halt() above */
260 usb_clear_halt(serial->dev, pipe);
261 ret = usb_bulk_msg(serial->dev, pipe, result,
262 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
263 if (ret) {
264 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
265 serial->type->description, ret);
266 goto no_firmware;
267 } else if (alen != sizeof(*hw_info) + 1) {
268 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
269 serial->type->description, alen);
270 goto no_firmware;
271 } else if (result[0] != command[0]) {
272 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
273 serial->type->description, result[0]);
274 goto no_firmware;
275 }
276
277 hw_info = (struct whiteheat_hw_info *)&result[1];
278
279 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
280 serial->type->description,
281 hw_info->sw_major_rev, hw_info->sw_minor_rev);
282
283 command_info = kmalloc(sizeof(struct whiteheat_command_private),
284 GFP_KERNEL);
285 if (!command_info)
286 goto no_command_private;
287
288 mutex_init(&command_info->mutex);
289 command_info->port_running = 0;
290 init_waitqueue_head(&command_info->wait_command);
291 usb_set_serial_port_data(command_port, command_info);
292 command_port->write_urb->complete = command_port_write_callback;
293 command_port->read_urb->complete = command_port_read_callback;
294 kfree(result);
295 kfree(command);
296
297 return 0;
298
299no_firmware:
300 /* Firmware likely not running */
301 dev_err(&serial->dev->dev,
302 "%s: Unable to retrieve firmware version, try replugging\n",
303 serial->type->description);
304 dev_err(&serial->dev->dev,
305 "%s: If the firmware is not running (status led not blinking)\n",
306 serial->type->description);
307 dev_err(&serial->dev->dev,
308 "%s: please contact support@connecttech.com\n",
309 serial->type->description);
310 kfree(result);
311 kfree(command);
312 return -ENODEV;
313
314no_command_private:
315 kfree(result);
316no_result_buffer:
317 kfree(command);
318no_command_buffer:
319 return -ENOMEM;
320}
321
322static void whiteheat_release(struct usb_serial *serial)
323{
324 struct usb_serial_port *command_port;
325
326 /* free up our private data for our command port */
327 command_port = serial->port[COMMAND_PORT];
328 kfree(usb_get_serial_port_data(command_port));
329}
330
331static int whiteheat_port_probe(struct usb_serial_port *port)
332{
333 struct whiteheat_private *info;
334
335 info = kzalloc(sizeof(*info), GFP_KERNEL);
336 if (!info)
337 return -ENOMEM;
338
339 usb_set_serial_port_data(port, info);
340
341 return 0;
342}
343
344static void whiteheat_port_remove(struct usb_serial_port *port)
345{
346 struct whiteheat_private *info;
347
348 info = usb_get_serial_port_data(port);
349 kfree(info);
350}
351
352static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
353{
354 int retval;
355
356 retval = start_command_port(port->serial);
357 if (retval)
358 goto exit;
359
360 /* send an open port command */
361 retval = firm_open(port);
362 if (retval) {
363 stop_command_port(port->serial);
364 goto exit;
365 }
366
367 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
368 if (retval) {
369 firm_close(port);
370 stop_command_port(port->serial);
371 goto exit;
372 }
373
374 if (tty)
375 firm_setup_port(tty);
376
377 /* Work around HCD bugs */
378 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
379 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
380
381 retval = usb_serial_generic_open(tty, port);
382 if (retval) {
383 firm_close(port);
384 stop_command_port(port->serial);
385 goto exit;
386 }
387exit:
388 return retval;
389}
390
391
392static void whiteheat_close(struct usb_serial_port *port)
393{
394 firm_report_tx_done(port);
395 firm_close(port);
396
397 usb_serial_generic_close(port);
398
399 stop_command_port(port->serial);
400}
401
402static int whiteheat_tiocmget(struct tty_struct *tty)
403{
404 struct usb_serial_port *port = tty->driver_data;
405 struct whiteheat_private *info = usb_get_serial_port_data(port);
406 unsigned int modem_signals = 0;
407
408 firm_get_dtr_rts(port);
409 if (info->mcr & UART_MCR_DTR)
410 modem_signals |= TIOCM_DTR;
411 if (info->mcr & UART_MCR_RTS)
412 modem_signals |= TIOCM_RTS;
413
414 return modem_signals;
415}
416
417static int whiteheat_tiocmset(struct tty_struct *tty,
418 unsigned int set, unsigned int clear)
419{
420 struct usb_serial_port *port = tty->driver_data;
421 struct whiteheat_private *info = usb_get_serial_port_data(port);
422
423 if (set & TIOCM_RTS)
424 info->mcr |= UART_MCR_RTS;
425 if (set & TIOCM_DTR)
426 info->mcr |= UART_MCR_DTR;
427
428 if (clear & TIOCM_RTS)
429 info->mcr &= ~UART_MCR_RTS;
430 if (clear & TIOCM_DTR)
431 info->mcr &= ~UART_MCR_DTR;
432
433 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
434 firm_set_rts(port, info->mcr & UART_MCR_RTS);
435 return 0;
436}
437
438
439static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss)
440{
441 ss->baud_base = 460800;
442}
443
444
445static void whiteheat_set_termios(struct tty_struct *tty,
446 struct usb_serial_port *port,
447 const struct ktermios *old_termios)
448{
449 firm_setup_port(tty);
450}
451
452static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
453{
454 struct usb_serial_port *port = tty->driver_data;
455 firm_set_break(port, break_state);
456}
457
458
459/*****************************************************************************
460 * Connect Tech's White Heat callback routines
461 *****************************************************************************/
462static void command_port_write_callback(struct urb *urb)
463{
464 int status = urb->status;
465
466 if (status) {
467 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
468 return;
469 }
470}
471
472
473static void command_port_read_callback(struct urb *urb)
474{
475 struct usb_serial_port *command_port = urb->context;
476 struct whiteheat_command_private *command_info;
477 int status = urb->status;
478 unsigned char *data = urb->transfer_buffer;
479 int result;
480
481 command_info = usb_get_serial_port_data(command_port);
482 if (!command_info) {
483 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
484 return;
485 }
486 if (!urb->actual_length) {
487 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
488 return;
489 }
490 if (status) {
491 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
492 if (status != -ENOENT)
493 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
494 wake_up(&command_info->wait_command);
495 return;
496 }
497
498 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
499
500 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
501 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
502 wake_up(&command_info->wait_command);
503 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
504 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
505 wake_up(&command_info->wait_command);
506 } else if (data[0] == WHITEHEAT_EVENT) {
507 /* These are unsolicited reports from the firmware, hence no
508 waiting command to wakeup */
509 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
510 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
511 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
512 memcpy(command_info->result_buffer, &data[1],
513 urb->actual_length - 1);
514 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
515 wake_up(&command_info->wait_command);
516 } else
517 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
518
519 /* Continue trying to always read */
520 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
521 if (result)
522 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
523 __func__, result);
524}
525
526
527/*****************************************************************************
528 * Connect Tech's White Heat firmware interface
529 *****************************************************************************/
530static int firm_send_command(struct usb_serial_port *port, __u8 command,
531 __u8 *data, __u8 datasize)
532{
533 struct usb_serial_port *command_port;
534 struct whiteheat_command_private *command_info;
535 struct whiteheat_private *info;
536 struct device *dev = &port->dev;
537 __u8 *transfer_buffer;
538 int retval = 0;
539 int t;
540
541 dev_dbg(dev, "%s - command %d\n", __func__, command);
542
543 command_port = port->serial->port[COMMAND_PORT];
544 command_info = usb_get_serial_port_data(command_port);
545
546 if (command_port->bulk_out_size < datasize + 1)
547 return -EIO;
548
549 mutex_lock(&command_info->mutex);
550 command_info->command_finished = false;
551
552 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
553 transfer_buffer[0] = command;
554 memcpy(&transfer_buffer[1], data, datasize);
555 command_port->write_urb->transfer_buffer_length = datasize + 1;
556 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
557 if (retval) {
558 dev_dbg(dev, "%s - submit urb failed\n", __func__);
559 goto exit;
560 }
561
562 /* wait for the command to complete */
563 t = wait_event_timeout(command_info->wait_command,
564 (bool)command_info->command_finished, COMMAND_TIMEOUT);
565 if (!t)
566 usb_kill_urb(command_port->write_urb);
567
568 if (command_info->command_finished == false) {
569 dev_dbg(dev, "%s - command timed out.\n", __func__);
570 retval = -ETIMEDOUT;
571 goto exit;
572 }
573
574 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
575 dev_dbg(dev, "%s - command failed.\n", __func__);
576 retval = -EIO;
577 goto exit;
578 }
579
580 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
581 dev_dbg(dev, "%s - command completed.\n", __func__);
582 switch (command) {
583 case WHITEHEAT_GET_DTR_RTS:
584 info = usb_get_serial_port_data(port);
585 info->mcr = command_info->result_buffer[0];
586 break;
587 }
588 }
589exit:
590 mutex_unlock(&command_info->mutex);
591 return retval;
592}
593
594
595static int firm_open(struct usb_serial_port *port)
596{
597 struct whiteheat_simple open_command;
598
599 open_command.port = port->port_number + 1;
600 return firm_send_command(port, WHITEHEAT_OPEN,
601 (__u8 *)&open_command, sizeof(open_command));
602}
603
604
605static int firm_close(struct usb_serial_port *port)
606{
607 struct whiteheat_simple close_command;
608
609 close_command.port = port->port_number + 1;
610 return firm_send_command(port, WHITEHEAT_CLOSE,
611 (__u8 *)&close_command, sizeof(close_command));
612}
613
614
615static void firm_setup_port(struct tty_struct *tty)
616{
617 struct usb_serial_port *port = tty->driver_data;
618 struct device *dev = &port->dev;
619 struct whiteheat_port_settings port_settings;
620 unsigned int cflag = tty->termios.c_cflag;
621 speed_t baud;
622
623 port_settings.port = port->port_number + 1;
624
625 port_settings.bits = tty_get_char_size(cflag);
626 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
627
628 /* determine the parity */
629 if (cflag & PARENB)
630 if (cflag & CMSPAR)
631 if (cflag & PARODD)
632 port_settings.parity = WHITEHEAT_PAR_MARK;
633 else
634 port_settings.parity = WHITEHEAT_PAR_SPACE;
635 else
636 if (cflag & PARODD)
637 port_settings.parity = WHITEHEAT_PAR_ODD;
638 else
639 port_settings.parity = WHITEHEAT_PAR_EVEN;
640 else
641 port_settings.parity = WHITEHEAT_PAR_NONE;
642 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
643
644 /* figure out the stop bits requested */
645 if (cflag & CSTOPB)
646 port_settings.stop = 2;
647 else
648 port_settings.stop = 1;
649 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
650
651 /* figure out the flow control settings */
652 if (cflag & CRTSCTS)
653 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
654 WHITEHEAT_HFLOW_RTS);
655 else
656 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
657 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
658 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
659 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
660 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
661 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
662
663 /* determine software flow control */
664 if (I_IXOFF(tty))
665 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
666 else
667 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
668 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
669
670 port_settings.xon = START_CHAR(tty);
671 port_settings.xoff = STOP_CHAR(tty);
672 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
673
674 /* get the baud rate wanted */
675 baud = tty_get_baud_rate(tty);
676 port_settings.baud = cpu_to_le32(baud);
677 dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
678
679 /* fixme: should set validated settings */
680 tty_encode_baud_rate(tty, baud, baud);
681
682 /* handle any settings that aren't specified in the tty structure */
683 port_settings.lloop = 0;
684
685 /* now send the message to the device */
686 firm_send_command(port, WHITEHEAT_SETUP_PORT,
687 (__u8 *)&port_settings, sizeof(port_settings));
688}
689
690
691static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
692{
693 struct whiteheat_set_rdb rts_command;
694
695 rts_command.port = port->port_number + 1;
696 rts_command.state = onoff;
697 return firm_send_command(port, WHITEHEAT_SET_RTS,
698 (__u8 *)&rts_command, sizeof(rts_command));
699}
700
701
702static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
703{
704 struct whiteheat_set_rdb dtr_command;
705
706 dtr_command.port = port->port_number + 1;
707 dtr_command.state = onoff;
708 return firm_send_command(port, WHITEHEAT_SET_DTR,
709 (__u8 *)&dtr_command, sizeof(dtr_command));
710}
711
712
713static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
714{
715 struct whiteheat_set_rdb break_command;
716
717 break_command.port = port->port_number + 1;
718 break_command.state = onoff;
719 return firm_send_command(port, WHITEHEAT_SET_BREAK,
720 (__u8 *)&break_command, sizeof(break_command));
721}
722
723
724static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
725{
726 struct whiteheat_purge purge_command;
727
728 purge_command.port = port->port_number + 1;
729 purge_command.what = rxtx;
730 return firm_send_command(port, WHITEHEAT_PURGE,
731 (__u8 *)&purge_command, sizeof(purge_command));
732}
733
734
735static int firm_get_dtr_rts(struct usb_serial_port *port)
736{
737 struct whiteheat_simple get_dr_command;
738
739 get_dr_command.port = port->port_number + 1;
740 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
741 (__u8 *)&get_dr_command, sizeof(get_dr_command));
742}
743
744
745static int firm_report_tx_done(struct usb_serial_port *port)
746{
747 struct whiteheat_simple close_command;
748
749 close_command.port = port->port_number + 1;
750 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
751 (__u8 *)&close_command, sizeof(close_command));
752}
753
754
755/*****************************************************************************
756 * Connect Tech's White Heat utility functions
757 *****************************************************************************/
758static int start_command_port(struct usb_serial *serial)
759{
760 struct usb_serial_port *command_port;
761 struct whiteheat_command_private *command_info;
762 int retval = 0;
763
764 command_port = serial->port[COMMAND_PORT];
765 command_info = usb_get_serial_port_data(command_port);
766 mutex_lock(&command_info->mutex);
767 if (!command_info->port_running) {
768 /* Work around HCD bugs */
769 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
770
771 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
772 if (retval) {
773 dev_err(&serial->dev->dev,
774 "%s - failed submitting read urb, error %d\n",
775 __func__, retval);
776 goto exit;
777 }
778 }
779 command_info->port_running++;
780
781exit:
782 mutex_unlock(&command_info->mutex);
783 return retval;
784}
785
786
787static void stop_command_port(struct usb_serial *serial)
788{
789 struct usb_serial_port *command_port;
790 struct whiteheat_command_private *command_info;
791
792 command_port = serial->port[COMMAND_PORT];
793 command_info = usb_get_serial_port_data(command_port);
794 mutex_lock(&command_info->mutex);
795 command_info->port_running--;
796 if (!command_info->port_running)
797 usb_kill_urb(command_port->read_urb);
798 mutex_unlock(&command_info->mutex);
799}
800
801module_usb_serial_driver(serial_drivers, id_table_combined);
802
803MODULE_AUTHOR(DRIVER_AUTHOR);
804MODULE_DESCRIPTION(DRIVER_DESC);
805MODULE_LICENSE("GPL");
806
807MODULE_FIRMWARE("whiteheat.fw");
808MODULE_FIRMWARE("whiteheat_loader.fw");