1#
   2# Touchscreen driver configuration
   3#
   4menuconfig INPUT_TOUCHSCREEN
   5	bool "Touchscreens"
   6	help
   7	  Say Y here, and a list of supported touchscreens will be displayed.
   8	  This option doesn't affect the kernel.
   9
  10	  If unsure, say Y.
  11
  12if INPUT_TOUCHSCREEN
  13
  14config TOUCHSCREEN_PROPERTIES
  15	def_tristate INPUT
  16	depends on INPUT
  17
  18config TOUCHSCREEN_88PM860X
  19	tristate "Marvell 88PM860x touchscreen"
  20	depends on MFD_88PM860X
  21	help
  22	  Say Y here if you have a 88PM860x PMIC and want to enable
  23	  support for the built-in touchscreen.
  24
  25	  If unsure, say N.
  26
  27	  To compile this driver as a module, choose M here: the
  28	  module will be called 88pm860x-ts.
  29
  30config TOUCHSCREEN_ADS7846
  31	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32	depends on SPI_MASTER
  33	depends on HWMON = n || HWMON
  34	help
  35	  Say Y here if you have a touchscreen interface using the
  36	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37	  and your board-specific setup code includes that in its
  38	  table of SPI devices.
  39
  40	  If HWMON is selected, and the driver is told the reference voltage
  41	  on your board, you will also get hwmon interfaces for the voltage
  42	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44	  If unsure, say N (but it's safe to say "Y").
  45
  46	  To compile this driver as a module, choose M here: the
  47	  module will be called ads7846.
  48
  49config TOUCHSCREEN_AD7877
  50	tristate "AD7877 based touchscreens"
  51	depends on SPI_MASTER
  52	help
  53	  Say Y here if you have a touchscreen interface using the
  54	  AD7877 controller, and your board-specific initialization
  55	  code includes that in its table of SPI devices.
  56
  57	  If unsure, say N (but it's safe to say "Y").
  58
  59	  To compile this driver as a module, choose M here: the
  60	  module will be called ad7877.
  61
  62config TOUCHSCREEN_AD7879
  63	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64	help
  65	  Say Y here if you want to support a touchscreen interface using
  66	  the AD7879-1/AD7889-1 controller.
  67
  68	  You should select a bus connection too.
  69
  70	  To compile this driver as a module, choose M here: the
  71	  module will be called ad7879.
  72
  73config TOUCHSCREEN_AD7879_I2C
  74	tristate "support I2C bus connection"
  75	depends on TOUCHSCREEN_AD7879 && I2C
 
  76	help
  77	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79	  To compile this driver as a module, choose M here: the
  80	  module will be called ad7879-i2c.
  81
  82config TOUCHSCREEN_AD7879_SPI
  83	tristate "support SPI bus connection"
  84	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
 
  85	help
  86	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88	  If unsure, say N (but it's safe to say "Y").
  89
  90	  To compile this driver as a module, choose M here: the
  91	  module will be called ad7879-spi.
  92
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  93config TOUCHSCREEN_AR1021_I2C
  94	tristate "Microchip AR1021 i2c touchscreen"
  95	depends on I2C && OF
  96	help
  97	  Say Y here if you have the Microchip AR1021 touchscreen controller
  98	  chip in your system.
  99
 100	  If unsure, say N.
 101
 102	  To compile this driver as a module, choose M here: the
 103	  module will be called ar1021_i2c.
 104
 105config TOUCHSCREEN_ATMEL_MXT
 106	tristate "Atmel mXT I2C Touchscreen"
 107	depends on I2C
 108	select FW_LOADER
 109	help
 110	  Say Y here if you have Atmel mXT series I2C touchscreen,
 111	  such as AT42QT602240/ATMXT224, connected to your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called atmel_mxt_ts.
 117
 
 
 
 
 
 
 
 
 
 118config TOUCHSCREEN_AUO_PIXCIR
 119	tristate "AUO in-cell touchscreen using Pixcir ICs"
 120	depends on I2C
 121	depends on GPIOLIB || COMPILE_TEST
 122	help
 123	  Say Y here if you have a AUO display with in-cell touchscreen
 124	  using Pixcir ICs.
 125
 126	  If unsure, say N.
 127
 128	  To compile this driver as a module, choose M here: the
 129	  module will be called auo-pixcir-ts.
 130
 131config TOUCHSCREEN_BU21013
 132	tristate "BU21013 based touch panel controllers"
 133	depends on I2C
 134	help
 135	  Say Y here if you have a bu21013 touchscreen connected to
 136	  your system.
 137
 138	  If unsure, say N.
 139
 140	  To compile this driver as a module, choose M here: the
 141	  module will be called bu21013_ts.
 142
 
 
 
 
 
 
 
 
 
 
 
 
 143config TOUCHSCREEN_CHIPONE_ICN8318
 144	tristate "chipone icn8318 touchscreen controller"
 145	depends on GPIOLIB || COMPILE_TEST
 146	depends on I2C
 147	depends on OF
 148	help
 149	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 150
 151	  If unsure, say N.
 152
 153	  To compile this driver as a module, choose M here: the
 154	  module will be called chipone_icn8318.
 155
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 156config TOUCHSCREEN_CY8CTMG110
 157	tristate "cy8ctmg110 touchscreen"
 158	depends on I2C
 159	depends on GPIOLIB || COMPILE_TEST
 160	help
 161	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 162	  an AAVA device.
 163
 164	  If unsure, say N.
 165
 166	  To compile this driver as a module, choose M here: the
 167	  module will be called cy8ctmg110_ts.
 168
 169config TOUCHSCREEN_CYTTSP_CORE
 170	tristate "Cypress TTSP touchscreen"
 171	help
 172	  Say Y here if you have a touchscreen using controller from
 173	  the Cypress TrueTouch(tm) Standard Product family connected
 174	  to your system. You will also need to select appropriate
 175	  bus connection below.
 176
 177	  If unsure, say N.
 178
 179	  To compile this driver as a module, choose M here: the
 180	  module will be called cyttsp_core.
 181
 182config TOUCHSCREEN_CYTTSP_I2C
 183	tristate "support I2C bus connection"
 184	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 185	help
 186	  Say Y here if the touchscreen is connected via I2C bus.
 187
 188	  To compile this driver as a module, choose M here: the
 189	  module will be called cyttsp_i2c.
 190
 191config TOUCHSCREEN_CYTTSP_SPI
 192	tristate "support SPI bus connection"
 193	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 194	help
 195	  Say Y here if the touchscreen is connected via SPI bus.
 196
 197	  To compile this driver as a module, choose M here: the
 198	  module will be called cyttsp_spi.
 199
 200config TOUCHSCREEN_CYTTSP4_CORE
 201	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 202	help
 203	  Core driver for Cypress TrueTouch(tm) Standard Product
 204	  Generation4 touchscreen controllers.
 205
 206	  Say Y here if you have a Cypress Gen4 touchscreen.
 207
 208	  If unsure, say N.
 209
 210	  To compile this driver as a module, choose M here.
 211
 212config TOUCHSCREEN_CYTTSP4_I2C
 213	tristate "support I2C bus connection"
 214	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 215	help
 216	  Say Y here if the touchscreen is connected via I2C bus.
 217
 218	  To compile this driver as a module, choose M here: the
 219	  module will be called cyttsp4_i2c.
 220
 221config TOUCHSCREEN_CYTTSP4_SPI
 222	tristate "support SPI bus connection"
 223	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 224	help
 225	  Say Y here if the touchscreen is connected via SPI bus.
 226
 227	  To compile this driver as a module, choose M here: the
 228	  module will be called cyttsp4_spi.
 229
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 230config TOUCHSCREEN_DA9034
 231	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 232	depends on PMIC_DA903X
 233	default y
 234	help
 235	  Say Y here to enable the support for the touchscreen found
 236	  on Dialog Semiconductor DA9034 PMIC.
 237
 238	  If unsure, say N.
 239
 240	  To compile this driver as a module, choose M here: the
 241	  module will be called da9034-ts.
 242
 243config TOUCHSCREEN_DA9052
 244	tristate "Dialog DA9052/DA9053 TSI"
 245	depends on PMIC_DA9052
 246	help
 247	  Say Y here to support the touchscreen found on Dialog Semiconductor
 248	  DA9052-BC and DA9053-AA/Bx PMICs.
 249
 250	  If unsure, say N.
 251
 252	  To compile this driver as a module, choose M here: the
 253	  module will be called da9052_tsi.
 254
 255config TOUCHSCREEN_DYNAPRO
 256	tristate "Dynapro serial touchscreen"
 257	select SERIO
 258	help
 259	  Say Y here if you have a Dynapro serial touchscreen connected to
 260	  your system.
 261
 262	  If unsure, say N.
 263
 264	  To compile this driver as a module, choose M here: the
 265	  module will be called dynapro.
 266
 267config TOUCHSCREEN_HAMPSHIRE
 268	tristate "Hampshire serial touchscreen"
 269	select SERIO
 270	help
 271	  Say Y here if you have a Hampshire serial touchscreen connected to
 272	  your system.
 273
 274	  If unsure, say N.
 275
 276	  To compile this driver as a module, choose M here: the
 277	  module will be called hampshire.
 278
 279config TOUCHSCREEN_EETI
 280	tristate "EETI touchscreen panel support"
 281	depends on I2C
 282	help
 283	  Say Y here to enable support for I2C connected EETI touch panels.
 284
 285	  To compile this driver as a module, choose M here: the
 286	  module will be called eeti_ts.
 287
 288config TOUCHSCREEN_EGALAX
 289	tristate "EETI eGalax multi-touch panel support"
 290	depends on I2C && OF
 291	help
 292	  Say Y here to enable support for I2C connected EETI
 293	  eGalax multi-touch panels.
 294
 295	  To compile this driver as a module, choose M here: the
 296	  module will be called egalax_ts.
 297
 298config TOUCHSCREEN_EGALAX_SERIAL
 299	tristate "EETI eGalax serial touchscreen"
 300	select SERIO
 301	help
 302	  Say Y here to enable support for serial connected EETI
 303	  eGalax touch panels.
 304
 305	  To compile this driver as a module, choose M here: the
 306	  module will be called egalax_ts_serial.
 307
 308config TOUCHSCREEN_FT6236
 309	tristate "FT6236 I2C touchscreen"
 310	depends on I2C
 311	depends on GPIOLIB || COMPILE_TEST
 312	help
 313	  Say Y here to enable support for the I2C connected FT6x06 and
 314	  FT6x36 family of capacitive touchscreen drivers.
 315
 316	  If unsure, say N.
 317
 318	  To compile this driver as a module, choose M here: the
 319	  module will be called ft6236.
 320
 321config TOUCHSCREEN_FUJITSU
 322	tristate "Fujitsu serial touchscreen"
 323	select SERIO
 324	help
 325	  Say Y here if you have the Fujitsu touchscreen (such as one
 326	  installed in Lifebook P series laptop) connected to your
 327	  system.
 328
 329	  If unsure, say N.
 330
 331	  To compile this driver as a module, choose M here: the
 332	  module will be called fujitsu-ts.
 333
 334config TOUCHSCREEN_GOODIX
 335	tristate "Goodix I2C touchscreen"
 336	depends on I2C
 337	depends on GPIOLIB || COMPILE_TEST
 338	help
 339	  Say Y here if you have the Goodix touchscreen (such as one
 340	  installed in Onda v975w tablets) connected to your
 341	  system. It also supports 5-finger chip models, which can be
 342	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 343
 344	  If unsure, say N.
 345
 346	  To compile this driver as a module, choose M here: the
 347	  module will be called goodix.
 348
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 349config TOUCHSCREEN_ILI210X
 350	tristate "Ilitek ILI210X based touchscreen"
 351	depends on I2C
 
 352	help
 353	  Say Y here if you have a ILI210X based touchscreen
 354	  controller. This driver supports models ILI2102,
 355	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 356	  Such kind of chipsets can be found in Amazon Kindle Fire
 357	  touchscreens.
 358
 359	  If unsure, say N.
 360
 361	  To compile this driver as a module, choose M here: the
 362	  module will be called ili210x.
 363
 
 
 
 
 
 
 
 
 
 
 
 
 364config TOUCHSCREEN_IPROC
 365	tristate "IPROC touch panel driver support"
 366	depends on ARCH_BCM_IPROC || COMPILE_TEST
 367	help
 368	  Say Y here if you want to add support for the IPROC touch
 369	  controller to your system.
 370
 371	  If unsure, say N.
 372
 373	  To compile this driver as a module, choose M here: the
 374	  module will be called bcm_iproc_tsc.
 375
 376config TOUCHSCREEN_S3C2410
 377	tristate "Samsung S3C2410/generic touchscreen input driver"
 378	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 379	depends on S3C_ADC
 380	help
 381	  Say Y here if you have the s3c2410 touchscreen.
 382
 383	  If unsure, say N.
 384
 385	  To compile this driver as a module, choose M here: the
 386	  module will be called s3c2410_ts.
 387
 
 
 
 
 
 
 
 
 
 
 
 388config TOUCHSCREEN_GUNZE
 389	tristate "Gunze AHL-51S touchscreen"
 390	select SERIO
 391	help
 392	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 393	  your system.
 394
 395	  If unsure, say N.
 396
 397	  To compile this driver as a module, choose M here: the
 398	  module will be called gunze.
 399
 
 
 
 
 
 
 
 
 
 
 
 
 400config TOUCHSCREEN_ELAN
 401	tristate "Elan eKTH I2C touchscreen"
 402	depends on I2C
 403	help
 404	  Say Y here if you have an Elan eKTH I2C touchscreen
 405	  connected to your system.
 406
 407	  If unsure, say N.
 408
 409	  To compile this driver as a module, choose M here: the
 410	  module will be called elants_i2c.
 411
 412config TOUCHSCREEN_ELO
 413	tristate "Elo serial touchscreens"
 414	select SERIO
 415	help
 416	  Say Y here if you have an Elo serial touchscreen connected to
 417	  your system.
 418
 419	  If unsure, say N.
 420
 421	  To compile this driver as a module, choose M here: the
 422	  module will be called elo.
 423
 424config TOUCHSCREEN_WACOM_W8001
 425	tristate "Wacom W8001 penabled serial touchscreen"
 426	select SERIO
 427	help
 428	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 429	  connected to your system.
 430
 431	  If unsure, say N.
 432
 433	  To compile this driver as a module, choose M here: the
 434	  module will be called wacom_w8001.
 435
 436config TOUCHSCREEN_WACOM_I2C
 437	tristate "Wacom Tablet support (I2C)"
 438	depends on I2C
 439	help
 440	  Say Y here if you want to use the I2C version of the Wacom
 441	  Pen Tablet.
 442
 443	  If unsure, say N.
 444
 445	  To compile this driver as a module, choose M here: the module
 446	  will be called wacom_i2c.
 447
 448config TOUCHSCREEN_LPC32XX
 449	tristate "LPC32XX touchscreen controller"
 450	depends on ARCH_LPC32XX
 451	help
 452	  Say Y here if you have a LPC32XX device and want
 453	  to support the built-in touchscreen.
 454
 455	  To compile this driver as a module, choose M here: the
 456	  module will be called lpc32xx_ts.
 457
 458config TOUCHSCREEN_MAX11801
 459	tristate "MAX11801 based touchscreens"
 460	depends on I2C
 461	help
 462	  Say Y here if you have a MAX11801 based touchscreen
 463	  controller.
 464
 465	  If unsure, say N.
 466
 467	  To compile this driver as a module, choose M here: the
 468	  module will be called max11801_ts.
 469
 470config TOUCHSCREEN_MCS5000
 471	tristate "MELFAS MCS-5000 touchscreen"
 472	depends on I2C
 473	help
 474	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 475	  chip in your system.
 476
 477	  If unsure, say N.
 478
 479	  To compile this driver as a module, choose M here: the
 480	  module will be called mcs5000_ts.
 481
 482config TOUCHSCREEN_MMS114
 483	tristate "MELFAS MMS114 touchscreen"
 484	depends on I2C
 485	help
 486	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 487	  chip in your system.
 488
 489	  If unsure, say N.
 490
 491	  To compile this driver as a module, choose M here: the
 492	  module will be called mms114.
 493
 494config TOUCHSCREEN_MELFAS_MIP4
 495	tristate "MELFAS MIP4 Touchscreen"
 496	depends on I2C
 497	help
 498	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 499
 500	  If unsure, say N.
 501
 502	  To compile this driver as a module, choose M here:
 503	  the module will be called melfas_mip4.
 504
 
 
 
 
 
 
 
 
 
 
 
 
 505config TOUCHSCREEN_MTOUCH
 506	tristate "MicroTouch serial touchscreens"
 507	select SERIO
 508	help
 509	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 510	  your system.
 511
 512	  If unsure, say N.
 513
 514	  To compile this driver as a module, choose M here: the
 515	  module will be called mtouch.
 516
 
 
 
 
 
 
 
 
 
 
 517config TOUCHSCREEN_IMX6UL_TSC
 518	tristate "Freescale i.MX6UL touchscreen controller"
 519	depends on (OF && GPIOLIB) || COMPILE_TEST
 520	help
 521	  Say Y here if you have a Freescale i.MX6UL, and want to
 522	  use the internal touchscreen controller.
 523
 524	  If unsure, say N.
 525
 526	  To compile this driver as a module, choose M here: the
 527	  module will be called imx6ul_tsc.
 528
 529config TOUCHSCREEN_INEXIO
 530	tristate "iNexio serial touchscreens"
 531	select SERIO
 532	help
 533	  Say Y here if you have an iNexio serial touchscreen connected to
 534	  your system.
 535
 536	  If unsure, say N.
 537
 538	  To compile this driver as a module, choose M here: the
 539	  module will be called inexio.
 540
 541config TOUCHSCREEN_INTEL_MID
 542	tristate "Intel MID platform resistive touchscreen"
 543	depends on INTEL_SCU_IPC
 544	help
 545	  Say Y here if you have a Intel MID based touchscreen in
 546	  your system.
 547
 548	  If unsure, say N.
 549
 550	  To compile this driver as a module, choose M here: the
 551	  module will be called intel_mid_touch.
 552
 553config TOUCHSCREEN_MK712
 554	tristate "ICS MicroClock MK712 touchscreen"
 555	help
 556	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 557	  controller chip in your system.
 558
 559	  If unsure, say N.
 560
 561	  To compile this driver as a module, choose M here: the
 562	  module will be called mk712.
 563
 564config TOUCHSCREEN_HP600
 565	tristate "HP Jornada 6xx touchscreen"
 566	depends on SH_HP6XX && SH_ADC
 567	help
 568	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 569          support the built-in touchscreen.
 570
 571	  To compile this driver as a module, choose M here: the
 572	  module will be called hp680_ts_input.
 573
 574config TOUCHSCREEN_HP7XX
 575	tristate "HP Jornada 7xx touchscreen"
 576	depends on SA1100_JORNADA720_SSP
 577	help
 578	  Say Y here if you have a HP Jornada 710/720/728 and want
 579	  to support the built-in touchscreen.
 580
 581	  To compile this driver as a module, choose M here: the
 582	  module will be called jornada720_ts.
 583
 584config TOUCHSCREEN_IPAQ_MICRO
 585	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 586	depends on MFD_IPAQ_MICRO
 587	help
 588	  Say Y here to enable support for the touchscreen attached to
 589	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 590
 591	  If unsure, say N.
 592
 593	  To compile this driver as a module, choose M here: the
 594	  module will be called ipaq-micro-ts.
 595
 596config TOUCHSCREEN_HTCPEN
 597	tristate "HTC Shift X9500 touchscreen"
 598	depends on ISA
 599	help
 600	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 601	  Clio / Shangrila and want to support the built-in touchscreen.
 602
 603	  If unsure, say N.
 604
 605	  To compile this driver as a module, choose M here: the
 606	  module will be called htcpen.
 607
 608config TOUCHSCREEN_PENMOUNT
 609	tristate "Penmount serial touchscreen"
 610	select SERIO
 611	help
 612	  Say Y here if you have a Penmount serial touchscreen connected to
 613	  your system.
 614
 615	  If unsure, say N.
 616
 617	  To compile this driver as a module, choose M here: the
 618	  module will be called penmount.
 619
 620config TOUCHSCREEN_EDT_FT5X06
 621	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 622	depends on I2C
 623	help
 624	  Say Y here if you have an EDT "Polytouch" touchscreen based
 625	  on the FocalTech FT5x06 family of controllers connected to
 626	  your system.
 627
 628	  If unsure, say N.
 629
 630	  To compile this driver as a module, choose M here: the
 631	  module will be called edt-ft5x06.
 632
 
 
 
 
 
 
 
 
 
 
 
 
 633config TOUCHSCREEN_MIGOR
 634	tristate "Renesas MIGO-R touchscreen"
 635	depends on SH_MIGOR && I2C
 636	help
 637	  Say Y here to enable MIGO-R touchscreen support.
 638
 639	  If unsure, say N.
 640
 641	  To compile this driver as a module, choose M here: the
 642	  module will be called migor_ts.
 643
 644config TOUCHSCREEN_TOUCHRIGHT
 645	tristate "Touchright serial touchscreen"
 646	select SERIO
 647	help
 648	  Say Y here if you have a Touchright serial touchscreen connected to
 649	  your system.
 650
 651	  If unsure, say N.
 652
 653	  To compile this driver as a module, choose M here: the
 654	  module will be called touchright.
 655
 656config TOUCHSCREEN_TOUCHWIN
 657	tristate "Touchwin serial touchscreen"
 658	select SERIO
 659	help
 660	  Say Y here if you have a Touchwin serial touchscreen connected to
 661	  your system.
 662
 663	  If unsure, say N.
 664
 665	  To compile this driver as a module, choose M here: the
 666	  module will be called touchwin.
 667
 668config TOUCHSCREEN_TI_AM335X_TSC
 669	tristate "TI Touchscreen Interface"
 670	depends on MFD_TI_AM335X_TSCADC
 671	help
 672	  Say Y here if you have 4/5/8 wire touchscreen controller
 673	  to be connected to the ADC controller on your TI AM335x SoC.
 674
 675	  If unsure, say N.
 676
 677	  To compile this driver as a module, choose M here: the
 678	  module will be called ti_am335x_tsc.
 679
 680config TOUCHSCREEN_UCB1400
 681	tristate "Philips UCB1400 touchscreen"
 682	depends on AC97_BUS
 683	depends on UCB1400_CORE
 684	help
 685	  This enables support for the Philips UCB1400 touchscreen interface.
 686	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
 687	  will be initialized only after the ALSA subsystem has been
 688	  brought up and the UCB1400 detected.  You therefore have to
 689	  configure ALSA support as well (either built-in or modular,
 690	  independently of whether this driver is itself built-in or
 691	  modular) for this driver to work.
 692
 693	  To compile this driver as a module, choose M here: the
 694	  module will be called ucb1400_ts.
 695
 696config TOUCHSCREEN_PIXCIR
 697	tristate "PIXCIR I2C touchscreens"
 698	depends on I2C
 699	help
 700	  Say Y here if you have a pixcir i2c touchscreen
 701	  controller.
 702
 703	  If unsure, say N.
 704
 705	  To compile this driver as a module, choose M here: the
 706	  module will be called pixcir_i2c_ts.
 707
 708config TOUCHSCREEN_WDT87XX_I2C
 709	tristate "Weida HiTech I2C touchscreen"
 710	depends on I2C
 711	help
 712	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 713	  connected to your system.
 714
 715	  If unsure, say N.
 716
 717	  To compile this driver as a module, choose M here: the
 718	  module will be called wdt87xx_i2c.
 719
 720config TOUCHSCREEN_WM831X
 721	tristate "Support for WM831x touchscreen controllers"
 722	depends on MFD_WM831X
 723	help
 724	  This enables support for the touchscreen controller on the WM831x
 725	  series of PMICs.
 726
 727	  To compile this driver as a module, choose M here: the
 728	  module will be called wm831x-ts.
 729
 730config TOUCHSCREEN_WM97XX
 731	tristate "Support for WM97xx AC97 touchscreen controllers"
 732	depends on AC97_BUS
 733	help
 734	  Say Y here if you have a Wolfson Microelectronics WM97xx
 735	  touchscreen connected to your system. Note that this option
 736	  only enables core driver, you will also need to select
 737	  support for appropriate chip below.
 738
 739	  If unsure, say N.
 740
 741	  To compile this driver as a module, choose M here: the
 742	  module will be called wm97xx-ts.
 743
 744config TOUCHSCREEN_WM9705
 745	bool "WM9705 Touchscreen interface support"
 746	depends on TOUCHSCREEN_WM97XX
 747	default y
 748	help
 749	  Say Y here to enable support for the Wolfson Microelectronics
 750	  WM9705 touchscreen controller.
 751
 752config TOUCHSCREEN_WM9712
 753	bool "WM9712 Touchscreen interface support"
 754	depends on TOUCHSCREEN_WM97XX
 755	default y
 756	help
 757	  Say Y here to enable support for the Wolfson Microelectronics
 758	  WM9712 touchscreen controller.
 759
 760config TOUCHSCREEN_WM9713
 761	bool "WM9713 Touchscreen interface support"
 762	depends on TOUCHSCREEN_WM97XX
 763	default y
 764	help
 765	  Say Y here to enable support for the Wolfson Microelectronics
 766	  WM9713 touchscreen controller.
 767
 768config TOUCHSCREEN_WM97XX_ATMEL
 769	tristate "WM97xx Atmel accelerated touch"
 770	depends on TOUCHSCREEN_WM97XX && AVR32
 771	help
 772	  Say Y here for support for streaming mode with WM97xx touchscreens
 773	  on Atmel AT91 or AVR32 systems with an AC97C module.
 774
 775	  Be aware that this will use channel B in the controller for
 776	  streaming data, this must not conflict with other AC97C drivers.
 777
 778	  If unsure, say N.
 779
 780	  To compile this driver as a module, choose M here: the module will
 781	  be called atmel-wm97xx.
 782
 783config TOUCHSCREEN_WM97XX_MAINSTONE
 784	tristate "WM97xx Mainstone/Palm accelerated touch"
 785	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 
 786	help
 787	  Say Y here for support for streaming mode with WM97xx touchscreens
 788	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 789
 790	  If unsure, say N.
 791
 792	  To compile this driver as a module, choose M here: the
 793	  module will be called mainstone-wm97xx.
 794
 795config TOUCHSCREEN_WM97XX_ZYLONITE
 796	tristate "Zylonite accelerated touch"
 797	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 
 798	select TOUCHSCREEN_WM9713
 799	help
 800	  Say Y here for support for streaming mode with the touchscreen
 801	  on Zylonite systems.
 802
 803	  If unsure, say N.
 804
 805	  To compile this driver as a module, choose M here: the
 806	  module will be called zylonite-wm97xx.
 807
 808config TOUCHSCREEN_USB_COMPOSITE
 809	tristate "USB Touchscreen Driver"
 810	depends on USB_ARCH_HAS_HCD
 811	select USB
 812	help
 813	  USB Touchscreen driver for:
 814	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 815	  - PanJit TouchSet USB
 816	  - 3M MicroTouch USB (EX II series)
 817	  - ITM
 818	  - some other eTurboTouch
 819	  - Gunze AHL61
 820	  - DMC TSC-10/25
 821	  - IRTOUCHSYSTEMS/UNITOP
 822	  - IdealTEK URTC1000
 823	  - GoTop Super_Q2/GogoPen/PenPower tablets
 824	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 825	  - Zytronic controllers
 826	  - Elo TouchSystems 2700 IntelliTouch
 827	  - EasyTouch USB Touch Controller from Data Modul
 828	  - e2i (Mimo monitors)
 829
 830	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 831	  a usage description and the required user-space stuff.
 832
 833	  To compile this driver as a module, choose M here: the
 834	  module will be called usbtouchscreen.
 835
 
 
 
 
 
 
 
 
 
 
 836config TOUCHSCREEN_MX25
 837	tristate "Freescale i.MX25 touchscreen input driver"
 838	depends on MFD_MX25_TSADC
 839	help
 840	  Enable support for touchscreen connected to your i.MX25.
 841
 842	  To compile this driver as a module, choose M here: the
 843	  module will be called fsl-imx25-tcq.
 844
 845config TOUCHSCREEN_MC13783
 846	tristate "Freescale MC13783 touchscreen input driver"
 847	depends on MFD_MC13XXX
 848	help
 849	  Say Y here if you have an Freescale MC13783 PMIC on your
 850	  board and want to use its touchscreen
 851
 852	  If unsure, say N.
 853
 854	  To compile this driver as a module, choose M here: the
 855	  module will be called mc13783_ts.
 856
 857config TOUCHSCREEN_USB_EGALAX
 858	default y
 859	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 860	depends on TOUCHSCREEN_USB_COMPOSITE
 861
 862config TOUCHSCREEN_USB_PANJIT
 863	default y
 864	bool "PanJit device support" if EXPERT
 865	depends on TOUCHSCREEN_USB_COMPOSITE
 866
 867config TOUCHSCREEN_USB_3M
 868	default y
 869	bool "3M/Microtouch EX II series device support" if EXPERT
 870	depends on TOUCHSCREEN_USB_COMPOSITE
 871
 872config TOUCHSCREEN_USB_ITM
 873	default y
 874	bool "ITM device support" if EXPERT
 875	depends on TOUCHSCREEN_USB_COMPOSITE
 876
 877config TOUCHSCREEN_USB_ETURBO
 878	default y
 879	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 880	depends on TOUCHSCREEN_USB_COMPOSITE
 881
 882config TOUCHSCREEN_USB_GUNZE
 883	default y
 884	bool "Gunze AHL61 device support" if EXPERT
 885	depends on TOUCHSCREEN_USB_COMPOSITE
 886
 887config TOUCHSCREEN_USB_DMC_TSC10
 888	default y
 889	bool "DMC TSC-10/25 device support" if EXPERT
 890	depends on TOUCHSCREEN_USB_COMPOSITE
 891
 892config TOUCHSCREEN_USB_IRTOUCH
 893	default y
 894	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 895	depends on TOUCHSCREEN_USB_COMPOSITE
 896
 897config TOUCHSCREEN_USB_IDEALTEK
 898	default y
 899	bool "IdealTEK URTC1000 device support" if EXPERT
 900	depends on TOUCHSCREEN_USB_COMPOSITE
 901
 902config TOUCHSCREEN_USB_GENERAL_TOUCH
 903	default y
 904	bool "GeneralTouch Touchscreen device support" if EXPERT
 905	depends on TOUCHSCREEN_USB_COMPOSITE
 906
 907config TOUCHSCREEN_USB_GOTOP
 908	default y
 909	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 910	depends on TOUCHSCREEN_USB_COMPOSITE
 911
 912config TOUCHSCREEN_USB_JASTEC
 913	default y
 914	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 915	depends on TOUCHSCREEN_USB_COMPOSITE
 916
 917config TOUCHSCREEN_USB_ELO
 918	default y
 919	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 920	depends on TOUCHSCREEN_USB_COMPOSITE
 921
 922config TOUCHSCREEN_USB_E2I
 923	default y
 924	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 925	depends on TOUCHSCREEN_USB_COMPOSITE
 926
 927config TOUCHSCREEN_USB_ZYTRONIC
 928	default y
 929	bool "Zytronic controller" if EXPERT
 930	depends on TOUCHSCREEN_USB_COMPOSITE
 931
 932config TOUCHSCREEN_USB_ETT_TC45USB
 933	default y
 934	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 935	depends on TOUCHSCREEN_USB_COMPOSITE
 936
 937config TOUCHSCREEN_USB_NEXIO
 938	default y
 939	bool "NEXIO/iNexio device support" if EXPERT
 940	depends on TOUCHSCREEN_USB_COMPOSITE
 941
 942config TOUCHSCREEN_USB_EASYTOUCH
 943	default y
 944	bool "EasyTouch USB Touch controller device support" if EMBEDDED
 945	depends on TOUCHSCREEN_USB_COMPOSITE
 946	help
 947	  Say Y here if you have an EasyTouch USB Touch controller.
 948	  If unsure, say N.
 949
 950config TOUCHSCREEN_TOUCHIT213
 951	tristate "Sahara TouchIT-213 touchscreen"
 952	select SERIO
 953	help
 954	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 955
 956	  If unsure, say N.
 957
 958	  To compile this driver as a module, choose M here: the
 959	  module will be called touchit213.
 960
 961config TOUCHSCREEN_TS4800
 962	tristate "TS-4800 touchscreen"
 963	depends on HAS_IOMEM && OF
 964	depends on SOC_IMX51 || COMPILE_TEST
 965	select MFD_SYSCON
 966	select INPUT_POLLDEV
 967	help
 968	  Say Y here if you have a touchscreen on a TS-4800 board.
 969
 970	  On TS-4800, the touchscreen is not handled directly by Linux but by
 971	  a companion FPGA.
 972
 973	  If unsure, say N.
 974
 975	  To compile this driver as a module, choose M here: the
 976	  module will be called ts4800_ts.
 977
 978config TOUCHSCREEN_TSC_SERIO
 979	tristate "TSC-10/25/40 serial touchscreen support"
 980	select SERIO
 981	help
 982	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 983	  to your system.
 984
 985	  If unsure, say N.
 986
 987	  To compile this driver as a module, choose M here: the
 988	  module will be called tsc40.
 989
 990config TOUCHSCREEN_TSC200X_CORE
 991	tristate
 992
 993config TOUCHSCREEN_TSC2004
 994	tristate "TSC2004 based touchscreens"
 995	depends on I2C
 996	select REGMAP_I2C
 997	select TOUCHSCREEN_TSC200X_CORE
 998	help
 999	  Say Y here if you have a TSC2004 based touchscreen.
1000
1001	  If unsure, say N.
1002
1003	  To compile this driver as a module, choose M here: the
1004	  module will be called tsc2004.
1005
1006config TOUCHSCREEN_TSC2005
1007	tristate "TSC2005 based touchscreens"
1008	depends on SPI_MASTER
1009	select REGMAP_SPI
1010	select TOUCHSCREEN_TSC200X_CORE
1011	help
1012	  Say Y here if you have a TSC2005 based touchscreen.
1013
1014	  If unsure, say N.
1015
1016	  To compile this driver as a module, choose M here: the
1017	  module will be called tsc2005.
1018
1019config TOUCHSCREEN_TSC2007
1020	tristate "TSC2007 based touchscreens"
1021	depends on I2C
1022	help
1023	  Say Y here if you have a TSC2007 based touchscreen.
1024
1025	  If unsure, say N.
1026
1027	  To compile this driver as a module, choose M here: the
1028	  module will be called tsc2007.
1029
1030config TOUCHSCREEN_W90X900
1031	tristate "W90P910 touchscreen driver"
1032	depends on ARCH_W90X900
1033	help
1034	  Say Y here if you have a W90P910 based touchscreen.
1035
1036	  To compile this driver as a module, choose M here: the
1037	  module will be called w90p910_ts.
 
1038
1039config TOUCHSCREEN_PCAP
1040	tristate "Motorola PCAP touchscreen"
1041	depends on EZX_PCAP
1042	help
1043	  Say Y here if you have a Motorola EZX telephone and
1044	  want to enable support for the built-in touchscreen.
1045
1046	  To compile this driver as a module, choose M here: the
1047	  module will be called pcap_ts.
1048
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1049config TOUCHSCREEN_ST1232
1050	tristate "Sitronix ST1232 touchscreen controllers"
1051	depends on I2C
1052	help
1053	  Say Y here if you want to support Sitronix ST1232
1054	  touchscreen controller.
1055
1056	  If unsure, say N.
1057
1058	  To compile this driver as a module, choose M here: the
1059	  module will be called st1232_ts.
1060
 
 
 
 
 
 
 
 
 
 
 
1061config TOUCHSCREEN_STMPE
1062	tristate "STMicroelectronics STMPE touchscreens"
1063	depends on MFD_STMPE
1064	depends on (OF || COMPILE_TEST)
1065	help
1066	  Say Y here if you want support for STMicroelectronics
1067	  STMPE touchscreen controllers.
1068
1069	  To compile this driver as a module, choose M here: the
1070	  module will be called stmpe-ts.
1071
1072config TOUCHSCREEN_SUN4I
1073	tristate "Allwinner sun4i resistive touchscreen controller support"
1074	depends on ARCH_SUNXI || COMPILE_TEST
1075	depends on HWMON
1076	depends on THERMAL || !THERMAL_OF
1077	help
1078	  This selects support for the resistive touchscreen controller
1079	  found on Allwinner sunxi SoCs.
1080
1081	  To compile this driver as a module, choose M here: the
1082	  module will be called sun4i-ts.
1083
1084config TOUCHSCREEN_SUR40
1085	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1086	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1087	depends on VIDEO_V4L2
1088	select INPUT_POLLDEV
1089	select VIDEOBUF2_DMA_SG
1090	help
1091	  Say Y here if you want support for the Samsung SUR40 touchscreen
1092	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1093
1094	  To compile this driver as a module, choose M here: the
1095	  module will be called sur40.
1096
 
 
 
 
 
 
 
 
 
 
 
 
 
1097config TOUCHSCREEN_SX8654
1098	tristate "Semtech SX8654 touchscreen"
1099	depends on I2C
1100	help
1101	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1102
1103	  If unsure, say N
1104
1105	  To compile this driver as a module, choose M here: the
1106	  module will be called sx8654.
1107
1108config TOUCHSCREEN_TPS6507X
1109	tristate "TPS6507x based touchscreens"
1110	depends on I2C
1111	select INPUT_POLLDEV
1112	help
1113	  Say Y here if you have a TPS6507x based touchscreen
1114	  controller.
1115
1116	  If unsure, say N.
1117
1118	  To compile this driver as a module, choose M here: the
1119	  module will be called tps6507x_ts.
1120
 
 
 
 
 
 
 
 
 
 
 
1121config TOUCHSCREEN_ZFORCE
1122	tristate "Neonode zForce infrared touchscreens"
1123	depends on I2C
1124	depends on GPIOLIB || COMPILE_TEST
1125	help
1126	  Say Y here if you have a touchscreen using the zforce
1127	  infraread technology from Neonode.
1128
1129	  If unsure, say N.
1130
1131	  To compile this driver as a module, choose M here: the
1132	  module will be called zforce_ts.
1133
1134config TOUCHSCREEN_COLIBRI_VF50
1135	tristate "Toradex Colibri on board touchscreen driver"
1136	depends on IIO && VF610_ADC
1137	depends on GPIOLIB || COMPILE_TEST
1138	help
1139	  Say Y here if you have a Colibri VF50 and plan to use
1140	  the on-board provided 4-wire touchscreen driver.
1141
1142	  If unsure, say N.
1143
1144	  To compile this driver as a module, choose M here: the
1145	  module will be called colibri_vf50_ts.
1146
1147config TOUCHSCREEN_ROHM_BU21023
1148	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1149	depends on I2C
1150	help
1151	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1152
1153	  If unsure, say N.
1154
1155	  To compile this driver as a module, choose M here: the
1156	  module will be called bu21023_ts.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1157
1158endif

   1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Touchscreen driver configuration
   4#
   5menuconfig INPUT_TOUCHSCREEN
   6	bool "Touchscreens"
   7	help
   8	  Say Y here, and a list of supported touchscreens will be displayed.
   9	  This option doesn't affect the kernel.
  10
  11	  If unsure, say Y.
  12
  13if INPUT_TOUCHSCREEN
  14
 
 
 
 
  15config TOUCHSCREEN_88PM860X
  16	tristate "Marvell 88PM860x touchscreen"
  17	depends on MFD_88PM860X
  18	help
  19	  Say Y here if you have a 88PM860x PMIC and want to enable
  20	  support for the built-in touchscreen.
  21
  22	  If unsure, say N.
  23
  24	  To compile this driver as a module, choose M here: the
  25	  module will be called 88pm860x-ts.
  26
  27config TOUCHSCREEN_ADS7846
  28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  29	depends on SPI_MASTER
  30	depends on HWMON = n || HWMON
  31	help
  32	  Say Y here if you have a touchscreen interface using the
  33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  34	  and your board-specific setup code includes that in its
  35	  table of SPI devices.
  36
  37	  If HWMON is selected, and the driver is told the reference voltage
  38	  on your board, you will also get hwmon interfaces for the voltage
  39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  40
  41	  If unsure, say N (but it's safe to say "Y").
  42
  43	  To compile this driver as a module, choose M here: the
  44	  module will be called ads7846.
  45
  46config TOUCHSCREEN_AD7877
  47	tristate "AD7877 based touchscreens"
  48	depends on SPI_MASTER
  49	help
  50	  Say Y here if you have a touchscreen interface using the
  51	  AD7877 controller, and your board-specific initialization
  52	  code includes that in its table of SPI devices.
  53
  54	  If unsure, say N (but it's safe to say "Y").
  55
  56	  To compile this driver as a module, choose M here: the
  57	  module will be called ad7877.
  58
  59config TOUCHSCREEN_AD7879
  60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  61	help
  62	  Say Y here if you want to support a touchscreen interface using
  63	  the AD7879-1/AD7889-1 controller.
  64
  65	  You should select a bus connection too.
  66
  67	  To compile this driver as a module, choose M here: the
  68	  module will be called ad7879.
  69
  70config TOUCHSCREEN_AD7879_I2C
  71	tristate "support I2C bus connection"
  72	depends on TOUCHSCREEN_AD7879 && I2C
  73	select REGMAP_I2C
  74	help
  75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  76
  77	  To compile this driver as a module, choose M here: the
  78	  module will be called ad7879-i2c.
  79
  80config TOUCHSCREEN_AD7879_SPI
  81	tristate "support SPI bus connection"
  82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  83	select REGMAP_SPI
  84	help
  85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  86
  87	  If unsure, say N (but it's safe to say "Y").
  88
  89	  To compile this driver as a module, choose M here: the
  90	  module will be called ad7879-spi.
  91
  92config TOUCHSCREEN_ADC
  93	tristate "Generic ADC based resistive touchscreen"
  94	depends on IIO
  95	select IIO_BUFFER
  96	select IIO_BUFFER_CB
  97	help
  98	  Say Y here if you want to use the generic ADC
  99	  resistive touchscreen driver.
 100
 101	  If unsure, say N (but it's safe to say "Y").
 102
 103	  To compile this driver as a module, choose M here: the
 104	  module will be called resistive-adc-touch.ko.
 105
 106config TOUCHSCREEN_AR1021_I2C
 107	tristate "Microchip AR1020/1021 i2c touchscreen"
 108	depends on I2C && OF
 109	help
 110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
 111	  controller chip in your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called ar1021_i2c.
 117
 118config TOUCHSCREEN_ATMEL_MXT
 119	tristate "Atmel mXT I2C Touchscreen"
 120	depends on I2C
 121	select FW_LOADER
 122	help
 123	  Say Y here if you have Atmel mXT series I2C touchscreen,
 124	  such as AT42QT602240/ATMXT224, connected to your system.
 125
 126	  If unsure, say N.
 127
 128	  To compile this driver as a module, choose M here: the
 129	  module will be called atmel_mxt_ts.
 130
 131config TOUCHSCREEN_ATMEL_MXT_T37
 132	bool "Support T37 Diagnostic Data"
 133	depends on TOUCHSCREEN_ATMEL_MXT
 134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
 135	select VIDEOBUF2_VMALLOC
 136	help
 137	  Say Y here if you want support to output data from the T37
 138	  Diagnostic Data object using a V4L device.
 139
 140config TOUCHSCREEN_AUO_PIXCIR
 141	tristate "AUO in-cell touchscreen using Pixcir ICs"
 142	depends on I2C
 143	depends on GPIOLIB || COMPILE_TEST
 144	help
 145	  Say Y here if you have a AUO display with in-cell touchscreen
 146	  using Pixcir ICs.
 147
 148	  If unsure, say N.
 149
 150	  To compile this driver as a module, choose M here: the
 151	  module will be called auo-pixcir-ts.
 152
 153config TOUCHSCREEN_BU21013
 154	tristate "BU21013 based touch panel controllers"
 155	depends on I2C
 156	help
 157	  Say Y here if you have a bu21013 touchscreen connected to
 158	  your system.
 159
 160	  If unsure, say N.
 161
 162	  To compile this driver as a module, choose M here: the
 163	  module will be called bu21013_ts.
 164
 165config TOUCHSCREEN_BU21029
 166	tristate "Rohm BU21029 based touch panel controllers"
 167	depends on I2C
 168	help
 169	  Say Y here if you have a Rohm BU21029 touchscreen controller
 170	  connected to your system.
 171
 172	  If unsure, say N.
 173
 174	  To compile this driver as a module, choose M here: the
 175	  module will be called bu21029_ts.
 176
 177config TOUCHSCREEN_CHIPONE_ICN8318
 178	tristate "chipone icn8318 touchscreen controller"
 179	depends on GPIOLIB || COMPILE_TEST
 180	depends on I2C
 181	depends on OF
 182	help
 183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 184
 185	  If unsure, say N.
 186
 187	  To compile this driver as a module, choose M here: the
 188	  module will be called chipone_icn8318.
 189
 190config TOUCHSCREEN_CHIPONE_ICN8505
 191	tristate "chipone icn8505 touchscreen controller"
 192	depends on I2C && ACPI
 193	help
 194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
 195
 196	  If unsure, say N.
 197
 198	  To compile this driver as a module, choose M here: the
 199	  module will be called chipone_icn8505.
 200
 201config TOUCHSCREEN_CY8CTMA140
 202	tristate "cy8ctma140 touchscreen"
 203	depends on I2C
 204	help
 205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
 206	  touchscreen also just known as "TMA140"
 207
 208	  If unsure, say N.
 209
 210	  To compile this driver as a module, choose M here: the
 211	  module will be called cy8ctma140.
 212
 213config TOUCHSCREEN_CY8CTMG110
 214	tristate "cy8ctmg110 touchscreen"
 215	depends on I2C
 216	depends on GPIOLIB || COMPILE_TEST
 217	help
 218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 219	  an AAVA device.
 220
 221	  If unsure, say N.
 222
 223	  To compile this driver as a module, choose M here: the
 224	  module will be called cy8ctmg110_ts.
 225
 226config TOUCHSCREEN_CYTTSP_CORE
 227	tristate "Cypress TTSP touchscreen"
 228	help
 229	  Say Y here if you have a touchscreen using controller from
 230	  the Cypress TrueTouch(tm) Standard Product family connected
 231	  to your system. You will also need to select appropriate
 232	  bus connection below.
 233
 234	  If unsure, say N.
 235
 236	  To compile this driver as a module, choose M here: the
 237	  module will be called cyttsp_core.
 238
 239config TOUCHSCREEN_CYTTSP_I2C
 240	tristate "support I2C bus connection"
 241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 242	help
 243	  Say Y here if the touchscreen is connected via I2C bus.
 244
 245	  To compile this driver as a module, choose M here: the
 246	  module will be called cyttsp_i2c.
 247
 248config TOUCHSCREEN_CYTTSP_SPI
 249	tristate "support SPI bus connection"
 250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 251	help
 252	  Say Y here if the touchscreen is connected via SPI bus.
 253
 254	  To compile this driver as a module, choose M here: the
 255	  module will be called cyttsp_spi.
 256
 257config TOUCHSCREEN_CYTTSP4_CORE
 258	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 259	help
 260	  Core driver for Cypress TrueTouch(tm) Standard Product
 261	  Generation4 touchscreen controllers.
 262
 263	  Say Y here if you have a Cypress Gen4 touchscreen.
 264
 265	  If unsure, say N.
 266
 267	  To compile this driver as a module, choose M here.
 268
 269config TOUCHSCREEN_CYTTSP4_I2C
 270	tristate "support I2C bus connection"
 271	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 272	help
 273	  Say Y here if the touchscreen is connected via I2C bus.
 274
 275	  To compile this driver as a module, choose M here: the
 276	  module will be called cyttsp4_i2c.
 277
 278config TOUCHSCREEN_CYTTSP4_SPI
 279	tristate "support SPI bus connection"
 280	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 281	help
 282	  Say Y here if the touchscreen is connected via SPI bus.
 283
 284	  To compile this driver as a module, choose M here: the
 285	  module will be called cyttsp4_spi.
 286
 287config TOUCHSCREEN_CYTTSP5
 288	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
 289	depends on I2C
 290	select REGMAP_I2C
 291	select CRC_ITU_T
 292	help
 293	  Driver for Parade TrueTouch Standard Product Generation 5
 294	  touchscreen controllers. I2C bus interface support only.
 295
 296	  Say Y here if you have a Cypress Gen5 touchscreen.
 297
 298	  If unsure, say N.
 299
 300	  To compile this driver as a module, choose M here: the
 301	  module will be called cyttsp5.
 302
 303config TOUCHSCREEN_DA9034
 304	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 305	depends on PMIC_DA903X
 306	default y
 307	help
 308	  Say Y here to enable the support for the touchscreen found
 309	  on Dialog Semiconductor DA9034 PMIC.
 310
 311	  If unsure, say N.
 312
 313	  To compile this driver as a module, choose M here: the
 314	  module will be called da9034-ts.
 315
 316config TOUCHSCREEN_DA9052
 317	tristate "Dialog DA9052/DA9053 TSI"
 318	depends on PMIC_DA9052
 319	help
 320	  Say Y here to support the touchscreen found on Dialog Semiconductor
 321	  DA9052-BC and DA9053-AA/Bx PMICs.
 322
 323	  If unsure, say N.
 324
 325	  To compile this driver as a module, choose M here: the
 326	  module will be called da9052_tsi.
 327
 328config TOUCHSCREEN_DYNAPRO
 329	tristate "Dynapro serial touchscreen"
 330	select SERIO
 331	help
 332	  Say Y here if you have a Dynapro serial touchscreen connected to
 333	  your system.
 334
 335	  If unsure, say N.
 336
 337	  To compile this driver as a module, choose M here: the
 338	  module will be called dynapro.
 339
 340config TOUCHSCREEN_HAMPSHIRE
 341	tristate "Hampshire serial touchscreen"
 342	select SERIO
 343	help
 344	  Say Y here if you have a Hampshire serial touchscreen connected to
 345	  your system.
 346
 347	  If unsure, say N.
 348
 349	  To compile this driver as a module, choose M here: the
 350	  module will be called hampshire.
 351
 352config TOUCHSCREEN_EETI
 353	tristate "EETI touchscreen panel support"
 354	depends on I2C
 355	help
 356	  Say Y here to enable support for I2C connected EETI touch panels.
 357
 358	  To compile this driver as a module, choose M here: the
 359	  module will be called eeti_ts.
 360
 361config TOUCHSCREEN_EGALAX
 362	tristate "EETI eGalax multi-touch panel support"
 363	depends on I2C && OF
 364	help
 365	  Say Y here to enable support for I2C connected EETI
 366	  eGalax multi-touch panels.
 367
 368	  To compile this driver as a module, choose M here: the
 369	  module will be called egalax_ts.
 370
 371config TOUCHSCREEN_EGALAX_SERIAL
 372	tristate "EETI eGalax serial touchscreen"
 373	select SERIO
 374	help
 375	  Say Y here to enable support for serial connected EETI
 376	  eGalax touch panels.
 377
 378	  To compile this driver as a module, choose M here: the
 379	  module will be called egalax_ts_serial.
 380
 381config TOUCHSCREEN_EXC3000
 382	tristate "EETI EXC3000 multi-touch panel support"
 383	depends on I2C
 
 384	help
 385	  Say Y here to enable support for I2C connected EETI
 386	  EXC3000 multi-touch panels.
 
 
 387
 388	  To compile this driver as a module, choose M here: the
 389	  module will be called exc3000.
 390
 391config TOUCHSCREEN_FUJITSU
 392	tristate "Fujitsu serial touchscreen"
 393	select SERIO
 394	help
 395	  Say Y here if you have the Fujitsu touchscreen (such as one
 396	  installed in Lifebook P series laptop) connected to your
 397	  system.
 398
 399	  If unsure, say N.
 400
 401	  To compile this driver as a module, choose M here: the
 402	  module will be called fujitsu-ts.
 403
 404config TOUCHSCREEN_GOODIX
 405	tristate "Goodix I2C touchscreen"
 406	depends on I2C
 407	depends on GPIOLIB || COMPILE_TEST
 408	help
 409	  Say Y here if you have the Goodix touchscreen (such as one
 410	  installed in Onda v975w tablets) connected to your
 411	  system. It also supports 5-finger chip models, which can be
 412	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 413
 414	  If unsure, say N.
 415
 416	  To compile this driver as a module, choose M here: the
 417	  module will be called goodix.
 418
 419config TOUCHSCREEN_HIDEEP
 420	tristate "HiDeep Touch IC"
 421	depends on I2C
 422	help
 423	  Say Y here if you have a touchscreen using HiDeep.
 424
 425	  If unsure, say N.
 426
 427	  To compile this driver as a module, choose M here : the
 428	  module will be called hideep_ts.
 429
 430config TOUCHSCREEN_HYCON_HY46XX
 431	tristate "Hycon hy46xx touchscreen support"
 432	depends on I2C
 433	help
 434	  Say Y here if you have a touchscreen using Hycon hy46xx
 435
 436	  If unsure, say N.
 437
 438	  To compile this driver as a module, choose M here: the
 439	  module will be called hycon-hy46xx.
 440
 441config TOUCHSCREEN_HYNITRON_CSTXXX
 442	tristate "Hynitron touchscreen support"
 443	depends on I2C
 444	help
 445	  Say Y here if you have a touchscreen using a Hynitron
 446	  touchscreen controller.
 447
 448	  If unsure, say N.
 449
 450	  To compile this driver as a module, choose M here: the
 451	  module will be called hynitron-cstxxx.
 452
 453config TOUCHSCREEN_ILI210X
 454	tristate "Ilitek ILI210X based touchscreen"
 455	depends on I2C
 456	select CRC_CCITT
 457	help
 458	  Say Y here if you have a ILI210X based touchscreen
 459	  controller. This driver supports models ILI2102,
 460	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 461	  Such kind of chipsets can be found in Amazon Kindle Fire
 462	  touchscreens.
 463
 464	  If unsure, say N.
 465
 466	  To compile this driver as a module, choose M here: the
 467	  module will be called ili210x.
 468
 469config TOUCHSCREEN_ILITEK
 470	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
 471	depends on I2C
 472	help
 473	  Say Y here if you have touchscreen with ILITEK touch IC,
 474	  it supports 213X/23XX/25XX and other Lego series.
 475
 476	  If unsure, say N.
 477
 478	  To compile this driver as a module, choose M here: the
 479	  module will be called ilitek_ts_i2c.
 480
 481config TOUCHSCREEN_IPROC
 482	tristate "IPROC touch panel driver support"
 483	depends on ARCH_BCM_IPROC || COMPILE_TEST
 484	help
 485	  Say Y here if you want to add support for the IPROC touch
 486	  controller to your system.
 487
 488	  If unsure, say N.
 489
 490	  To compile this driver as a module, choose M here: the
 491	  module will be called bcm_iproc_tsc.
 492
 493config TOUCHSCREEN_S3C2410
 494	tristate "Samsung S3C2410/generic touchscreen input driver"
 495	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 496	depends on S3C_ADC
 497	help
 498	  Say Y here if you have the s3c2410 touchscreen.
 499
 500	  If unsure, say N.
 501
 502	  To compile this driver as a module, choose M here: the
 503	  module will be called s3c2410_ts.
 504
 505config TOUCHSCREEN_S6SY761
 506	tristate "Samsung S6SY761 Touchscreen driver"
 507	depends on I2C
 508	help
 509	  Say Y if you have the Samsung S6SY761 driver
 510
 511	  If unsure, say N
 512
 513	  To compile this driver as module, choose M here: the
 514	  module will be called s6sy761.
 515
 516config TOUCHSCREEN_GUNZE
 517	tristate "Gunze AHL-51S touchscreen"
 518	select SERIO
 519	help
 520	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 521	  your system.
 522
 523	  If unsure, say N.
 524
 525	  To compile this driver as a module, choose M here: the
 526	  module will be called gunze.
 527
 528config TOUCHSCREEN_EKTF2127
 529	tristate "Elan eKTF2127 I2C touchscreen"
 530	depends on I2C
 531	help
 532	  Say Y here if you have an Elan eKTF2127 touchscreen
 533	  connected to your system.
 534
 535	  If unsure, say N.
 536
 537	  To compile this driver as a module, choose M here: the
 538	  module will be called ektf2127.
 539
 540config TOUCHSCREEN_ELAN
 541	tristate "Elan eKTH I2C touchscreen"
 542	depends on I2C
 543	help
 544	  Say Y here if you have an Elan eKTH I2C touchscreen
 545	  connected to your system.
 546
 547	  If unsure, say N.
 548
 549	  To compile this driver as a module, choose M here: the
 550	  module will be called elants_i2c.
 551
 552config TOUCHSCREEN_ELO
 553	tristate "Elo serial touchscreens"
 554	select SERIO
 555	help
 556	  Say Y here if you have an Elo serial touchscreen connected to
 557	  your system.
 558
 559	  If unsure, say N.
 560
 561	  To compile this driver as a module, choose M here: the
 562	  module will be called elo.
 563
 564config TOUCHSCREEN_WACOM_W8001
 565	tristate "Wacom W8001 penabled serial touchscreen"
 566	select SERIO
 567	help
 568	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 569	  connected to your system.
 570
 571	  If unsure, say N.
 572
 573	  To compile this driver as a module, choose M here: the
 574	  module will be called wacom_w8001.
 575
 576config TOUCHSCREEN_WACOM_I2C
 577	tristate "Wacom Tablet support (I2C)"
 578	depends on I2C
 579	help
 580	  Say Y here if you want to use the I2C version of the Wacom
 581	  Pen Tablet.
 582
 583	  If unsure, say N.
 584
 585	  To compile this driver as a module, choose M here: the module
 586	  will be called wacom_i2c.
 587
 588config TOUCHSCREEN_LPC32XX
 589	tristate "LPC32XX touchscreen controller"
 590	depends on ARCH_LPC32XX
 591	help
 592	  Say Y here if you have a LPC32XX device and want
 593	  to support the built-in touchscreen.
 594
 595	  To compile this driver as a module, choose M here: the
 596	  module will be called lpc32xx_ts.
 597
 598config TOUCHSCREEN_MAX11801
 599	tristate "MAX11801 based touchscreens"
 600	depends on I2C
 601	help
 602	  Say Y here if you have a MAX11801 based touchscreen
 603	  controller.
 604
 605	  If unsure, say N.
 606
 607	  To compile this driver as a module, choose M here: the
 608	  module will be called max11801_ts.
 609
 610config TOUCHSCREEN_MCS5000
 611	tristate "MELFAS MCS-5000 touchscreen"
 612	depends on I2C
 613	help
 614	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 615	  chip in your system.
 616
 617	  If unsure, say N.
 618
 619	  To compile this driver as a module, choose M here: the
 620	  module will be called mcs5000_ts.
 621
 622config TOUCHSCREEN_MMS114
 623	tristate "MELFAS MMS114 touchscreen"
 624	depends on I2C
 625	help
 626	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 627	  chip in your system.
 628
 629	  If unsure, say N.
 630
 631	  To compile this driver as a module, choose M here: the
 632	  module will be called mms114.
 633
 634config TOUCHSCREEN_MELFAS_MIP4
 635	tristate "MELFAS MIP4 Touchscreen"
 636	depends on I2C
 637	help
 638	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 639
 640	  If unsure, say N.
 641
 642	  To compile this driver as a module, choose M here:
 643	  the module will be called melfas_mip4.
 644
 645config TOUCHSCREEN_MSG2638
 646	tristate "MStar msg2638 touchscreen support"
 647	depends on I2C
 648	depends on GPIOLIB || COMPILE_TEST
 649	help
 650	  Say Y here if you have an I2C touchscreen using MStar msg2638.
 651
 652	  If unsure, say N.
 653
 654	  To compile this driver as a module, choose M here: the
 655	  module will be called msg2638.
 656
 657config TOUCHSCREEN_MTOUCH
 658	tristate "MicroTouch serial touchscreens"
 659	select SERIO
 660	help
 661	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 662	  your system.
 663
 664	  If unsure, say N.
 665
 666	  To compile this driver as a module, choose M here: the
 667	  module will be called mtouch.
 668
 669config TOUCHSCREEN_IMAGIS
 670	tristate "Imagis touchscreen support"
 671	depends on I2C
 672	help
 673	  Say Y here if you have an Imagis IST30xxC touchscreen.
 674	  If unsure, say N.
 675
 676	  To compile this driver as a module, choose M here: the
 677	  module will be called imagis.
 678
 679config TOUCHSCREEN_IMX6UL_TSC
 680	tristate "Freescale i.MX6UL touchscreen controller"
 681	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
 682	help
 683	  Say Y here if you have a Freescale i.MX6UL, and want to
 684	  use the internal touchscreen controller.
 685
 686	  If unsure, say N.
 687
 688	  To compile this driver as a module, choose M here: the
 689	  module will be called imx6ul_tsc.
 690
 691config TOUCHSCREEN_INEXIO
 692	tristate "iNexio serial touchscreens"
 693	select SERIO
 694	help
 695	  Say Y here if you have an iNexio serial touchscreen connected to
 696	  your system.
 697
 698	  If unsure, say N.
 699
 700	  To compile this driver as a module, choose M here: the
 701	  module will be called inexio.
 702
 
 
 
 
 
 
 
 
 
 
 
 
 703config TOUCHSCREEN_MK712
 704	tristate "ICS MicroClock MK712 touchscreen"
 705	help
 706	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 707	  controller chip in your system.
 708
 709	  If unsure, say N.
 710
 711	  To compile this driver as a module, choose M here: the
 712	  module will be called mk712.
 713
 714config TOUCHSCREEN_HP600
 715	tristate "HP Jornada 6xx touchscreen"
 716	depends on SH_HP6XX && SH_ADC
 717	help
 718	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 719	  support the built-in touchscreen.
 720
 721	  To compile this driver as a module, choose M here: the
 722	  module will be called hp680_ts_input.
 723
 724config TOUCHSCREEN_HP7XX
 725	tristate "HP Jornada 7xx touchscreen"
 726	depends on SA1100_JORNADA720_SSP
 727	help
 728	  Say Y here if you have a HP Jornada 710/720/728 and want
 729	  to support the built-in touchscreen.
 730
 731	  To compile this driver as a module, choose M here: the
 732	  module will be called jornada720_ts.
 733
 734config TOUCHSCREEN_IPAQ_MICRO
 735	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 736	depends on MFD_IPAQ_MICRO
 737	help
 738	  Say Y here to enable support for the touchscreen attached to
 739	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 740
 741	  If unsure, say N.
 742
 743	  To compile this driver as a module, choose M here: the
 744	  module will be called ipaq-micro-ts.
 745
 746config TOUCHSCREEN_HTCPEN
 747	tristate "HTC Shift X9500 touchscreen"
 748	depends on ISA
 749	help
 750	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 751	  Clio / Shangrila and want to support the built-in touchscreen.
 752
 753	  If unsure, say N.
 754
 755	  To compile this driver as a module, choose M here: the
 756	  module will be called htcpen.
 757
 758config TOUCHSCREEN_PENMOUNT
 759	tristate "Penmount serial touchscreen"
 760	select SERIO
 761	help
 762	  Say Y here if you have a Penmount serial touchscreen connected to
 763	  your system.
 764
 765	  If unsure, say N.
 766
 767	  To compile this driver as a module, choose M here: the
 768	  module will be called penmount.
 769
 770config TOUCHSCREEN_EDT_FT5X06
 771	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 772	depends on I2C
 773	help
 774	  Say Y here if you have an EDT "Polytouch" touchscreen based
 775	  on the FocalTech FT5x06 family of controllers connected to
 776	  your system.
 777
 778	  If unsure, say N.
 779
 780	  To compile this driver as a module, choose M here: the
 781	  module will be called edt-ft5x06.
 782
 783config TOUCHSCREEN_RASPBERRYPI_FW
 784	tristate "Raspberry Pi's firmware base touch screen support"
 785	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
 786	help
 787	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 788	  your system.
 789
 790	  If unsure, say N.
 791
 792	  To compile this driver as a module, choose M here: the
 793	  module will be called raspberrypi-ts.
 794
 795config TOUCHSCREEN_MIGOR
 796	tristate "Renesas MIGO-R touchscreen"
 797	depends on (SH_MIGOR || COMPILE_TEST) && I2C
 798	help
 799	  Say Y here to enable MIGO-R touchscreen support.
 800
 801	  If unsure, say N.
 802
 803	  To compile this driver as a module, choose M here: the
 804	  module will be called migor_ts.
 805
 806config TOUCHSCREEN_TOUCHRIGHT
 807	tristate "Touchright serial touchscreen"
 808	select SERIO
 809	help
 810	  Say Y here if you have a Touchright serial touchscreen connected to
 811	  your system.
 812
 813	  If unsure, say N.
 814
 815	  To compile this driver as a module, choose M here: the
 816	  module will be called touchright.
 817
 818config TOUCHSCREEN_TOUCHWIN
 819	tristate "Touchwin serial touchscreen"
 820	select SERIO
 821	help
 822	  Say Y here if you have a Touchwin serial touchscreen connected to
 823	  your system.
 824
 825	  If unsure, say N.
 826
 827	  To compile this driver as a module, choose M here: the
 828	  module will be called touchwin.
 829
 830config TOUCHSCREEN_TI_AM335X_TSC
 831	tristate "TI Touchscreen Interface"
 832	depends on MFD_TI_AM335X_TSCADC
 833	help
 834	  Say Y here if you have 4/5/8 wire touchscreen controller
 835	  to be connected to the ADC controller on your TI AM335x SoC.
 836
 837	  If unsure, say N.
 838
 839	  To compile this driver as a module, choose M here: the
 840	  module will be called ti_am335x_tsc.
 841
 842config TOUCHSCREEN_UCB1400
 843	tristate "Philips UCB1400 touchscreen"
 844	depends on AC97_BUS
 845	depends on UCB1400_CORE
 846	help
 847	  This enables support for the Philips UCB1400 touchscreen interface.
 848	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
 849	  will be initialized only after the ALSA subsystem has been
 850	  brought up and the UCB1400 detected.  You therefore have to
 851	  configure ALSA support as well (either built-in or modular,
 852	  independently of whether this driver is itself built-in or
 853	  modular) for this driver to work.
 854
 855	  To compile this driver as a module, choose M here: the
 856	  module will be called ucb1400_ts.
 857
 858config TOUCHSCREEN_PIXCIR
 859	tristate "PIXCIR I2C touchscreens"
 860	depends on I2C
 861	help
 862	  Say Y here if you have a pixcir i2c touchscreen
 863	  controller.
 864
 865	  If unsure, say N.
 866
 867	  To compile this driver as a module, choose M here: the
 868	  module will be called pixcir_i2c_ts.
 869
 870config TOUCHSCREEN_WDT87XX_I2C
 871	tristate "Weida HiTech I2C touchscreen"
 872	depends on I2C
 873	help
 874	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 875	  connected to your system.
 876
 877	  If unsure, say N.
 878
 879	  To compile this driver as a module, choose M here: the
 880	  module will be called wdt87xx_i2c.
 881
 882config TOUCHSCREEN_WM831X
 883	tristate "Support for WM831x touchscreen controllers"
 884	depends on MFD_WM831X
 885	help
 886	  This enables support for the touchscreen controller on the WM831x
 887	  series of PMICs.
 888
 889	  To compile this driver as a module, choose M here: the
 890	  module will be called wm831x-ts.
 891
 892config TOUCHSCREEN_WM97XX
 893	tristate "Support for WM97xx AC97 touchscreen controllers"
 894	depends on AC97_BUS || AC97_BUS_NEW
 895	help
 896	  Say Y here if you have a Wolfson Microelectronics WM97xx
 897	  touchscreen connected to your system. Note that this option
 898	  only enables core driver, you will also need to select
 899	  support for appropriate chip below.
 900
 901	  If unsure, say N.
 902
 903	  To compile this driver as a module, choose M here: the
 904	  module will be called wm97xx-ts.
 905
 906config TOUCHSCREEN_WM9705
 907	bool "WM9705 Touchscreen interface support"
 908	depends on TOUCHSCREEN_WM97XX
 909	default y
 910	help
 911	  Say Y here to enable support for the Wolfson Microelectronics
 912	  WM9705 touchscreen controller.
 913
 914config TOUCHSCREEN_WM9712
 915	bool "WM9712 Touchscreen interface support"
 916	depends on TOUCHSCREEN_WM97XX
 917	default y
 918	help
 919	  Say Y here to enable support for the Wolfson Microelectronics
 920	  WM9712 touchscreen controller.
 921
 922config TOUCHSCREEN_WM9713
 923	bool "WM9713 Touchscreen interface support"
 924	depends on TOUCHSCREEN_WM97XX
 925	default y
 926	help
 927	  Say Y here to enable support for the Wolfson Microelectronics
 928	  WM9713 touchscreen controller.
 929
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 930config TOUCHSCREEN_WM97XX_MAINSTONE
 931	tristate "WM97xx Mainstone/Palm accelerated touch"
 932	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 933	depends on SND_PXA2XX_LIB_AC97
 934	help
 935	  Say Y here for support for streaming mode with WM97xx touchscreens
 936	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 937
 938	  If unsure, say N.
 939
 940	  To compile this driver as a module, choose M here: the
 941	  module will be called mainstone-wm97xx.
 942
 943config TOUCHSCREEN_WM97XX_ZYLONITE
 944	tristate "Zylonite accelerated touch"
 945	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 946	depends on SND_PXA2XX_LIB_AC97
 947	select TOUCHSCREEN_WM9713
 948	help
 949	  Say Y here for support for streaming mode with the touchscreen
 950	  on Zylonite systems.
 951
 952	  If unsure, say N.
 953
 954	  To compile this driver as a module, choose M here: the
 955	  module will be called zylonite-wm97xx.
 956
 957config TOUCHSCREEN_USB_COMPOSITE
 958	tristate "USB Touchscreen Driver"
 959	depends on USB_ARCH_HAS_HCD
 960	select USB
 961	help
 962	  USB Touchscreen driver for:
 963	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 964	  - PanJit TouchSet USB
 965	  - 3M MicroTouch USB (EX II series)
 966	  - ITM
 967	  - some other eTurboTouch
 968	  - Gunze AHL61
 969	  - DMC TSC-10/25
 970	  - IRTOUCHSYSTEMS/UNITOP
 971	  - IdealTEK URTC1000
 972	  - GoTop Super_Q2/GogoPen/PenPower tablets
 973	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 974	  - Zytronic controllers
 975	  - Elo TouchSystems 2700 IntelliTouch
 976	  - EasyTouch USB Touch Controller from Data Module
 977	  - e2i (Mimo monitors)
 978
 979	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 980	  a usage description and the required user-space stuff.
 981
 982	  To compile this driver as a module, choose M here: the
 983	  module will be called usbtouchscreen.
 984
 985config TOUCHSCREEN_MXS_LRADC
 986	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
 987	depends on MFD_MXS_LRADC
 988	help
 989	  Say Y here if you have a touchscreen connected to the low-resolution
 990	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
 991
 992	  To compile this driver as a module, choose M here: the module will be
 993	  called mxs-lradc-ts.
 994
 995config TOUCHSCREEN_MX25
 996	tristate "Freescale i.MX25 touchscreen input driver"
 997	depends on MFD_MX25_TSADC
 998	help
 999	  Enable support for touchscreen connected to your i.MX25.
1000
1001	  To compile this driver as a module, choose M here: the
1002	  module will be called fsl-imx25-tcq.
1003
1004config TOUCHSCREEN_MC13783
1005	tristate "Freescale MC13783 touchscreen input driver"
1006	depends on MFD_MC13XXX
1007	help
1008	  Say Y here if you have an Freescale MC13783 PMIC on your
1009	  board and want to use its touchscreen
1010
1011	  If unsure, say N.
1012
1013	  To compile this driver as a module, choose M here: the
1014	  module will be called mc13783_ts.
1015
1016config TOUCHSCREEN_USB_EGALAX
1017	default y
1018	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
1019	depends on TOUCHSCREEN_USB_COMPOSITE
1020
1021config TOUCHSCREEN_USB_PANJIT
1022	default y
1023	bool "PanJit device support" if EXPERT
1024	depends on TOUCHSCREEN_USB_COMPOSITE
1025
1026config TOUCHSCREEN_USB_3M
1027	default y
1028	bool "3M/Microtouch EX II series device support" if EXPERT
1029	depends on TOUCHSCREEN_USB_COMPOSITE
1030
1031config TOUCHSCREEN_USB_ITM
1032	default y
1033	bool "ITM device support" if EXPERT
1034	depends on TOUCHSCREEN_USB_COMPOSITE
1035
1036config TOUCHSCREEN_USB_ETURBO
1037	default y
1038	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1039	depends on TOUCHSCREEN_USB_COMPOSITE
1040
1041config TOUCHSCREEN_USB_GUNZE
1042	default y
1043	bool "Gunze AHL61 device support" if EXPERT
1044	depends on TOUCHSCREEN_USB_COMPOSITE
1045
1046config TOUCHSCREEN_USB_DMC_TSC10
1047	default y
1048	bool "DMC TSC-10/25 device support" if EXPERT
1049	depends on TOUCHSCREEN_USB_COMPOSITE
1050
1051config TOUCHSCREEN_USB_IRTOUCH
1052	default y
1053	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1054	depends on TOUCHSCREEN_USB_COMPOSITE
1055
1056config TOUCHSCREEN_USB_IDEALTEK
1057	default y
1058	bool "IdealTEK URTC1000 device support" if EXPERT
1059	depends on TOUCHSCREEN_USB_COMPOSITE
1060
1061config TOUCHSCREEN_USB_GENERAL_TOUCH
1062	default y
1063	bool "GeneralTouch Touchscreen device support" if EXPERT
1064	depends on TOUCHSCREEN_USB_COMPOSITE
1065
1066config TOUCHSCREEN_USB_GOTOP
1067	default y
1068	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1069	depends on TOUCHSCREEN_USB_COMPOSITE
1070
1071config TOUCHSCREEN_USB_JASTEC
1072	default y
1073	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1074	depends on TOUCHSCREEN_USB_COMPOSITE
1075
1076config TOUCHSCREEN_USB_ELO
1077	default y
1078	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1079	depends on TOUCHSCREEN_USB_COMPOSITE
1080
1081config TOUCHSCREEN_USB_E2I
1082	default y
1083	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1084	depends on TOUCHSCREEN_USB_COMPOSITE
1085
1086config TOUCHSCREEN_USB_ZYTRONIC
1087	default y
1088	bool "Zytronic controller" if EXPERT
1089	depends on TOUCHSCREEN_USB_COMPOSITE
1090
1091config TOUCHSCREEN_USB_ETT_TC45USB
1092	default y
1093	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1094	depends on TOUCHSCREEN_USB_COMPOSITE
1095
1096config TOUCHSCREEN_USB_NEXIO
1097	default y
1098	bool "NEXIO/iNexio device support" if EXPERT
1099	depends on TOUCHSCREEN_USB_COMPOSITE
1100
1101config TOUCHSCREEN_USB_EASYTOUCH
1102	default y
1103	bool "EasyTouch USB Touch controller device support" if EXPERT
1104	depends on TOUCHSCREEN_USB_COMPOSITE
1105	help
1106	  Say Y here if you have an EasyTouch USB Touch controller.
1107	  If unsure, say N.
1108
1109config TOUCHSCREEN_TOUCHIT213
1110	tristate "Sahara TouchIT-213 touchscreen"
1111	select SERIO
1112	help
1113	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1114
1115	  If unsure, say N.
1116
1117	  To compile this driver as a module, choose M here: the
1118	  module will be called touchit213.
1119
1120config TOUCHSCREEN_TS4800
1121	tristate "TS-4800 touchscreen"
1122	depends on HAS_IOMEM && OF
1123	depends on SOC_IMX51 || COMPILE_TEST
1124	select MFD_SYSCON
 
1125	help
1126	  Say Y here if you have a touchscreen on a TS-4800 board.
1127
1128	  On TS-4800, the touchscreen is not handled directly by Linux but by
1129	  a companion FPGA.
1130
1131	  If unsure, say N.
1132
1133	  To compile this driver as a module, choose M here: the
1134	  module will be called ts4800_ts.
1135
1136config TOUCHSCREEN_TSC_SERIO
1137	tristate "TSC-10/25/40 serial touchscreen support"
1138	select SERIO
1139	help
1140	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1141	  to your system.
1142
1143	  If unsure, say N.
1144
1145	  To compile this driver as a module, choose M here: the
1146	  module will be called tsc40.
1147
1148config TOUCHSCREEN_TSC200X_CORE
1149	tristate
1150
1151config TOUCHSCREEN_TSC2004
1152	tristate "TSC2004 based touchscreens"
1153	depends on I2C
1154	select REGMAP_I2C
1155	select TOUCHSCREEN_TSC200X_CORE
1156	help
1157	  Say Y here if you have a TSC2004 based touchscreen.
1158
1159	  If unsure, say N.
1160
1161	  To compile this driver as a module, choose M here: the
1162	  module will be called tsc2004.
1163
1164config TOUCHSCREEN_TSC2005
1165	tristate "TSC2005 based touchscreens"
1166	depends on SPI_MASTER
1167	select REGMAP_SPI
1168	select TOUCHSCREEN_TSC200X_CORE
1169	help
1170	  Say Y here if you have a TSC2005 based touchscreen.
1171
1172	  If unsure, say N.
1173
1174	  To compile this driver as a module, choose M here: the
1175	  module will be called tsc2005.
1176
1177config TOUCHSCREEN_TSC2007
1178	tristate "TSC2007 based touchscreens"
1179	depends on I2C
1180	help
1181	  Say Y here if you have a TSC2007 based touchscreen.
1182
1183	  If unsure, say N.
1184
1185	  To compile this driver as a module, choose M here: the
1186	  module will be called tsc2007.
1187
1188config TOUCHSCREEN_TSC2007_IIO
1189	bool "IIO interface for external ADC input and temperature"
1190	depends on TOUCHSCREEN_TSC2007
1191	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1192	help
1193	  Saying Y here adds an iio interface to the tsc2007 which
1194	  provides values for the AUX input (used for e.g. battery
1195	  or ambient light monitoring), temperature and raw input
1196	  values.
1197
1198config TOUCHSCREEN_PCAP
1199	tristate "Motorola PCAP touchscreen"
1200	depends on EZX_PCAP
1201	help
1202	  Say Y here if you have a Motorola EZX telephone and
1203	  want to enable support for the built-in touchscreen.
1204
1205	  To compile this driver as a module, choose M here: the
1206	  module will be called pcap_ts.
1207
1208config TOUCHSCREEN_RM_TS
1209	tristate "Raydium I2C Touchscreen"
1210	depends on I2C
1211	depends on GPIOLIB || COMPILE_TEST
1212	help
1213	  Say Y here if you have Raydium series I2C touchscreen,
1214	  such as RM32380, connected to your system.
1215
1216	  If unsure, say N.
1217
1218	  To compile this driver as a module, choose M here: the
1219	  module will be called raydium_i2c_ts.
1220
1221config TOUCHSCREEN_SILEAD
1222	tristate "Silead I2C touchscreen"
1223	depends on I2C
1224	help
1225	  Say Y here if you have the Silead touchscreen connected to
1226	  your system.
1227
1228	  If unsure, say N.
1229
1230	  To compile this driver as a module, choose M here: the
1231	  module will be called silead.
1232
1233config TOUCHSCREEN_SIS_I2C
1234	tristate "SiS 9200 family I2C touchscreen"
1235	depends on I2C
1236	select CRC_ITU_T
1237	depends on GPIOLIB || COMPILE_TEST
1238	help
1239	  This enables support for SiS 9200 family over I2C based touchscreens.
1240
1241	  If unsure, say N.
1242
1243	  To compile this driver as a module, choose M here: the
1244	  module will be called sis_i2c.
1245
1246config TOUCHSCREEN_ST1232
1247	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1248	depends on I2C
1249	help
1250	  Say Y here if you want to support the Sitronix ST1232
1251	  or ST1633 touchscreen controller.
1252
1253	  If unsure, say N.
1254
1255	  To compile this driver as a module, choose M here: the
1256	  module will be called st1232_ts.
1257
1258config TOUCHSCREEN_STMFTS
1259	tristate "STMicroelectronics STMFTS touchscreen"
1260	depends on I2C
1261	depends on LEDS_CLASS
1262	help
1263	  Say Y here if you want support for STMicroelectronics
1264	  STMFTS touchscreen.
1265
1266	  To compile this driver as a module, choose M here: the
1267	  module will be called stmfts.
1268
1269config TOUCHSCREEN_STMPE
1270	tristate "STMicroelectronics STMPE touchscreens"
1271	depends on MFD_STMPE
1272	depends on OF
1273	help
1274	  Say Y here if you want support for STMicroelectronics
1275	  STMPE touchscreen controllers.
1276
1277	  To compile this driver as a module, choose M here: the
1278	  module will be called stmpe-ts.
1279
1280config TOUCHSCREEN_SUN4I
1281	tristate "Allwinner sun4i resistive touchscreen controller support"
1282	depends on ARCH_SUNXI || COMPILE_TEST
1283	depends on HWMON
1284	depends on THERMAL || !THERMAL_OF
1285	help
1286	  This selects support for the resistive touchscreen controller
1287	  found on Allwinner sunxi SoCs.
1288
1289	  To compile this driver as a module, choose M here: the
1290	  module will be called sun4i-ts.
1291
1292config TOUCHSCREEN_SUR40
1293	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1294	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1295	depends on VIDEO_DEV
 
1296	select VIDEOBUF2_DMA_SG
1297	help
1298	  Say Y here if you want support for the Samsung SUR40 touchscreen
1299	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1300
1301	  To compile this driver as a module, choose M here: the
1302	  module will be called sur40.
1303
1304config TOUCHSCREEN_SURFACE3_SPI
1305	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1306	depends on SPI
1307	depends on GPIOLIB || COMPILE_TEST
1308	help
1309	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1310	  controller chip as found on the Surface 3 in your system.
1311
1312	  If unsure, say N.
1313
1314	  To compile this driver as a module, choose M here: the
1315	  module will be called surface3_spi.
1316
1317config TOUCHSCREEN_SX8654
1318	tristate "Semtech SX8654 touchscreen"
1319	depends on I2C
1320	help
1321	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1322
1323	  If unsure, say N
1324
1325	  To compile this driver as a module, choose M here: the
1326	  module will be called sx8654.
1327
1328config TOUCHSCREEN_TPS6507X
1329	tristate "TPS6507x based touchscreens"
1330	depends on I2C
 
1331	help
1332	  Say Y here if you have a TPS6507x based touchscreen
1333	  controller.
1334
1335	  If unsure, say N.
1336
1337	  To compile this driver as a module, choose M here: the
1338	  module will be called tps6507x_ts.
1339
1340config TOUCHSCREEN_ZET6223
1341	tristate "Zeitec ZET6223 touchscreen driver"
1342	depends on I2C
1343	help
1344	  Say Y here if you have a touchscreen using Zeitec ZET6223
1345
1346	  If unsure, say N.
1347
1348	  To compile this driver as a module, choose M here: the
1349	  module will be called zet6223.
1350
1351config TOUCHSCREEN_ZFORCE
1352	tristate "Neonode zForce infrared touchscreens"
1353	depends on I2C
1354	depends on GPIOLIB || COMPILE_TEST
1355	help
1356	  Say Y here if you have a touchscreen using the zforce
1357	  infraread technology from Neonode.
1358
1359	  If unsure, say N.
1360
1361	  To compile this driver as a module, choose M here: the
1362	  module will be called zforce_ts.
1363
1364config TOUCHSCREEN_COLIBRI_VF50
1365	tristate "Toradex Colibri on board touchscreen driver"
1366	depends on IIO
1367	depends on GPIOLIB || COMPILE_TEST
1368	help
1369	  Say Y here if you have a Colibri VF50 and plan to use
1370	  the on-board provided 4-wire touchscreen driver.
1371
1372	  If unsure, say N.
1373
1374	  To compile this driver as a module, choose M here: the
1375	  module will be called colibri_vf50_ts.
1376
1377config TOUCHSCREEN_ROHM_BU21023
1378	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1379	depends on I2C
1380	help
1381	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1382
1383	  If unsure, say N.
1384
1385	  To compile this driver as a module, choose M here: the
1386	  module will be called bu21023_ts.
1387
1388config TOUCHSCREEN_IQS5XX
1389	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1390	depends on I2C
1391	help
1392	  Say Y to enable support for the Azoteq IQS550/572/525
1393	  family of trackpad/touchscreen controllers.
1394
1395	  To compile this driver as a module, choose M here: the
1396	  module will be called iqs5xx.
1397
1398config TOUCHSCREEN_ZINITIX
1399	tristate "Zinitix touchscreen support"
1400	depends on I2C
1401	help
1402	  Say Y here if you have a touchscreen using Zinitix bt541,
1403	  or something similar enough.
1404
1405	  If unsure, say N.
1406
1407	  To compile this driver as a module, choose M here: the
1408	  module will be called zinitix.
1409
1410config TOUCHSCREEN_HIMAX_HX83112B
1411	tristate "Himax hx83112b touchscreen driver"
1412	depends on I2C
1413	select REGMAP_I2C
1414	help
1415	  Say Y here to enable support for Himax hx83112b touchscreens.
1416
1417	  If unsure, say N.
1418
1419	  To compile this driver as a module, choose M here: the
1420	  module will be called himax_hx83112b.
1421
1422endif