Loading...
1/*
2 * sigreturn_codes.S - code sinpets for sigreturn syscalls
3 *
4 * Created by: Victor Kamensky, 2013-08-13
5 * Copyright: (C) 2013 Linaro Limited
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17#include <asm/unistd.h>
18
19/*
20 * For ARM syscalls, we encode the syscall number into the instruction.
21 * With EABI, the syscall number has to be loaded into r7. As result
22 * ARM syscall sequence snippet will have move and svc in .arm encoding
23 *
24 * For Thumb syscalls, we pass the syscall number via r7. We therefore
25 * need two 16-bit instructions in .thumb encoding
26 *
27 * Please note sigreturn_codes code are not executed in place. Instead
28 * they just copied by kernel into appropriate places. Code inside of
29 * arch/arm/kernel/signal.c is very sensitive to layout of these code
30 * snippets.
31 */
32
33/*
34 * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
35 * Note in this case codes skips those instructions but it uses .org
36 * directive to keep correct layout of sigreturn_codes array.
37 */
38#ifndef CONFIG_CPU_THUMBONLY
39#define ARM_OK(code...) code
40#else
41#define ARM_OK(code...)
42#endif
43
44 .macro arm_slot n
45 .org sigreturn_codes + 12 * (\n)
46ARM_OK( .arm )
47 .endm
48
49 .macro thumb_slot n
50 .org sigreturn_codes + 12 * (\n) + 8
51 .thumb
52 .endm
53
54#if __LINUX_ARM_ARCH__ <= 4
55 /*
56 * Note we manually set minimally required arch that supports
57 * required thumb opcodes for early arch versions. It is OK
58 * for this file to be used in combination with other
59 * lower arch variants, since these code snippets are only
60 * used as input data.
61 */
62 .arch armv4t
63#endif
64
65 .section .rodata
66 .global sigreturn_codes
67 .type sigreturn_codes, #object
68
69 .align
70
71sigreturn_codes:
72
73 /* ARM sigreturn syscall code snippet */
74 arm_slot 0
75ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
76ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
77
78 /* Thumb sigreturn syscall code snippet */
79 thumb_slot 0
80 movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
81 swi #0
82
83 /* ARM sigreturn_rt syscall code snippet */
84 arm_slot 1
85ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
86ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
87
88 /* Thumb sigreturn_rt syscall code snippet */
89 thumb_slot 1
90 movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
91 swi #0
92
93 /*
94 * Note on addtional space: setup_return in signal.c
95 * algorithm uses two words copy regardless whether
96 * it is thumb case or not, so we need additional
97 * word after real last entry.
98 */
99 arm_slot 2
100 .space 4
101
102 .size sigreturn_codes, . - sigreturn_codes
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * sigreturn_codes.S - code sinpets for sigreturn syscalls
4 *
5 * Created by: Victor Kamensky, 2013-08-13
6 * Copyright: (C) 2013 Linaro Limited
7 */
8
9#include <asm/assembler.h>
10#include <asm/asm-offsets.h>
11#include <asm/unistd.h>
12
13/*
14 * For ARM syscalls, we encode the syscall number into the instruction.
15 * With EABI, the syscall number has to be loaded into r7. As result
16 * ARM syscall sequence snippet will have move and svc in .arm encoding
17 *
18 * For Thumb syscalls, we pass the syscall number via r7. We therefore
19 * need two 16-bit instructions in .thumb encoding
20 *
21 * Please note sigreturn_codes code are not executed in place. Instead
22 * they just copied by kernel into appropriate places. Code inside of
23 * arch/arm/kernel/signal.c is very sensitive to layout of these code
24 * snippets.
25 */
26
27/*
28 * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
29 * Note in this case codes skips those instructions but it uses .org
30 * directive to keep correct layout of sigreturn_codes array.
31 */
32#ifndef CONFIG_CPU_THUMBONLY
33#define ARM_OK(code...) code
34#else
35#define ARM_OK(code...)
36#endif
37
38 .macro arm_slot n
39 .org sigreturn_codes + 12 * (\n)
40ARM_OK( .arm )
41 .endm
42
43 .macro thumb_slot n
44 .org sigreturn_codes + 12 * (\n) + 8
45 .thumb
46 .endm
47
48 .macro arm_fdpic_slot n
49 .org sigreturn_codes + 24 + 20 * (\n)
50ARM_OK( .arm )
51 .endm
52
53 .macro thumb_fdpic_slot n
54 .org sigreturn_codes + 24 + 20 * (\n) + 12
55 .thumb
56 .endm
57
58
59#if __LINUX_ARM_ARCH__ <= 4
60 /*
61 * Note we manually set minimally required arch that supports
62 * required thumb opcodes for early arch versions. It is OK
63 * for this file to be used in combination with other
64 * lower arch variants, since these code snippets are only
65 * used as input data.
66 */
67 .arch armv4t
68#endif
69
70 .section .rodata
71 .global sigreturn_codes
72 .type sigreturn_codes, #object
73
74 .align
75
76sigreturn_codes:
77
78 /* ARM sigreturn syscall code snippet */
79 arm_slot 0
80ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
81ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
82
83 /* Thumb sigreturn syscall code snippet */
84 thumb_slot 0
85 movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
86 swi #0
87
88 /* ARM sigreturn_rt syscall code snippet */
89 arm_slot 1
90ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
91ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
92
93 /* Thumb sigreturn_rt syscall code snippet */
94 thumb_slot 1
95 movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
96 swi #0
97
98 /* ARM sigreturn restorer FDPIC bounce code snippet */
99 arm_fdpic_slot 0
100ARM_OK( ldr r3, [sp, #SIGFRAME_RC3_OFFSET] )
101ARM_OK( ldmia r3, {r3, r9} )
102#ifdef CONFIG_ARM_THUMB
103ARM_OK( bx r3 )
104#else
105ARM_OK( ret r3 )
106#endif
107
108 /* Thumb sigreturn restorer FDPIC bounce code snippet */
109 thumb_fdpic_slot 0
110 ldr r3, [sp, #SIGFRAME_RC3_OFFSET]
111 ldmia r3, {r2, r3}
112 mov r9, r3
113 bx r2
114
115 /* ARM sigreturn_rt restorer FDPIC bounce code snippet */
116 arm_fdpic_slot 1
117ARM_OK( ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] )
118ARM_OK( ldmia r3, {r3, r9} )
119#ifdef CONFIG_ARM_THUMB
120ARM_OK( bx r3 )
121#else
122ARM_OK( ret r3 )
123#endif
124
125 /* Thumb sigreturn_rt restorer FDPIC bounce code snippet */
126 thumb_fdpic_slot 1
127 ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET]
128 ldmia r3, {r2, r3}
129 mov r9, r3
130 bx r2
131
132 /*
133 * Note on additional space: setup_return in signal.c
134 * always copies the same number of words regardless whether
135 * it is thumb case or not, so we need one additional padding
136 * word after the last entry.
137 */
138 .space 4
139
140 .size sigreturn_codes, . - sigreturn_codes