Loading...
1/*
2* Digi AccelePort USB-4 and USB-2 Serial Converters
3*
4* Copyright 2000 by Digi International
5*
6* This program is free software; you can redistribute it and/or modify
7* it under the terms of the GNU General Public License as published by
8* the Free Software Foundation; either version 2 of the License, or
9* (at your option) any later version.
10*
11* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
12* usb-serial driver.
13*
14* Peter Berger (pberger@brimson.com)
15* Al Borchers (borchers@steinerpoint.com)
16*/
17
18#include <linux/kernel.h>
19#include <linux/errno.h>
20#include <linux/slab.h>
21#include <linux/tty.h>
22#include <linux/tty_driver.h>
23#include <linux/tty_flip.h>
24#include <linux/module.h>
25#include <linux/spinlock.h>
26#include <linux/workqueue.h>
27#include <linux/uaccess.h>
28#include <linux/usb.h>
29#include <linux/wait.h>
30#include <linux/usb/serial.h>
31
32/* Defines */
33
34#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
35#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
36
37/* port output buffer length -- must be <= transfer buffer length - 2 */
38/* so we can be sure to send the full buffer in one urb */
39#define DIGI_OUT_BUF_SIZE 8
40
41/* port input buffer length -- must be >= transfer buffer length - 3 */
42/* so we can be sure to hold at least one full buffer from one urb */
43#define DIGI_IN_BUF_SIZE 64
44
45/* retry timeout while sleeping */
46#define DIGI_RETRY_TIMEOUT (HZ/10)
47
48/* timeout while waiting for tty output to drain in close */
49/* this delay is used twice in close, so the total delay could */
50/* be twice this value */
51#define DIGI_CLOSE_TIMEOUT (5*HZ)
52
53
54/* AccelePort USB Defines */
55
56/* ids */
57#define DIGI_VENDOR_ID 0x05c5
58#define DIGI_2_ID 0x0002 /* USB-2 */
59#define DIGI_4_ID 0x0004 /* USB-4 */
60
61/* commands
62 * "INB": can be used on the in-band endpoint
63 * "OOB": can be used on the out-of-band endpoint
64 */
65#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
66#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
67#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
68#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
69#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
70#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
71#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
72#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
73#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
74#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
75#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
76#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
77#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
78#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
79#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
80#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
81#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
82#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
83#define DIGI_CMD_SEND_DATA 18 /* INB */
84#define DIGI_CMD_RECEIVE_DATA 19 /* INB */
85#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
86#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
87
88/* baud rates */
89#define DIGI_BAUD_50 0
90#define DIGI_BAUD_75 1
91#define DIGI_BAUD_110 2
92#define DIGI_BAUD_150 3
93#define DIGI_BAUD_200 4
94#define DIGI_BAUD_300 5
95#define DIGI_BAUD_600 6
96#define DIGI_BAUD_1200 7
97#define DIGI_BAUD_1800 8
98#define DIGI_BAUD_2400 9
99#define DIGI_BAUD_4800 10
100#define DIGI_BAUD_7200 11
101#define DIGI_BAUD_9600 12
102#define DIGI_BAUD_14400 13
103#define DIGI_BAUD_19200 14
104#define DIGI_BAUD_28800 15
105#define DIGI_BAUD_38400 16
106#define DIGI_BAUD_57600 17
107#define DIGI_BAUD_76800 18
108#define DIGI_BAUD_115200 19
109#define DIGI_BAUD_153600 20
110#define DIGI_BAUD_230400 21
111#define DIGI_BAUD_460800 22
112
113/* arguments */
114#define DIGI_WORD_SIZE_5 0
115#define DIGI_WORD_SIZE_6 1
116#define DIGI_WORD_SIZE_7 2
117#define DIGI_WORD_SIZE_8 3
118
119#define DIGI_PARITY_NONE 0
120#define DIGI_PARITY_ODD 1
121#define DIGI_PARITY_EVEN 2
122#define DIGI_PARITY_MARK 3
123#define DIGI_PARITY_SPACE 4
124
125#define DIGI_STOP_BITS_1 0
126#define DIGI_STOP_BITS_2 1
127
128#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
129#define DIGI_INPUT_FLOW_CONTROL_RTS 2
130#define DIGI_INPUT_FLOW_CONTROL_DTR 4
131
132#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
133#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
134#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
135
136#define DIGI_DTR_INACTIVE 0
137#define DIGI_DTR_ACTIVE 1
138#define DIGI_DTR_INPUT_FLOW_CONTROL 2
139
140#define DIGI_RTS_INACTIVE 0
141#define DIGI_RTS_ACTIVE 1
142#define DIGI_RTS_INPUT_FLOW_CONTROL 2
143#define DIGI_RTS_TOGGLE 3
144
145#define DIGI_FLUSH_TX 1
146#define DIGI_FLUSH_RX 2
147#define DIGI_RESUME_TX 4 /* clears xoff condition */
148
149#define DIGI_TRANSMIT_NOT_IDLE 0
150#define DIGI_TRANSMIT_IDLE 1
151
152#define DIGI_DISABLE 0
153#define DIGI_ENABLE 1
154
155#define DIGI_DEASSERT 0
156#define DIGI_ASSERT 1
157
158/* in band status codes */
159#define DIGI_OVERRUN_ERROR 4
160#define DIGI_PARITY_ERROR 8
161#define DIGI_FRAMING_ERROR 16
162#define DIGI_BREAK_ERROR 32
163
164/* out of band status */
165#define DIGI_NO_ERROR 0
166#define DIGI_BAD_FIRST_PARAMETER 1
167#define DIGI_BAD_SECOND_PARAMETER 2
168#define DIGI_INVALID_LINE 3
169#define DIGI_INVALID_OPCODE 4
170
171/* input signals */
172#define DIGI_READ_INPUT_SIGNALS_SLOT 1
173#define DIGI_READ_INPUT_SIGNALS_ERR 2
174#define DIGI_READ_INPUT_SIGNALS_BUSY 4
175#define DIGI_READ_INPUT_SIGNALS_PE 8
176#define DIGI_READ_INPUT_SIGNALS_CTS 16
177#define DIGI_READ_INPUT_SIGNALS_DSR 32
178#define DIGI_READ_INPUT_SIGNALS_RI 64
179#define DIGI_READ_INPUT_SIGNALS_DCD 128
180
181
182/* Structures */
183
184struct digi_serial {
185 spinlock_t ds_serial_lock;
186 struct usb_serial_port *ds_oob_port; /* out-of-band port */
187 int ds_oob_port_num; /* index of out-of-band port */
188 int ds_device_started;
189};
190
191struct digi_port {
192 spinlock_t dp_port_lock;
193 int dp_port_num;
194 int dp_out_buf_len;
195 unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
196 int dp_write_urb_in_use;
197 unsigned int dp_modem_signals;
198 int dp_transmit_idle;
199 wait_queue_head_t dp_transmit_idle_wait;
200 int dp_throttled;
201 int dp_throttle_restart;
202 wait_queue_head_t dp_flush_wait;
203 wait_queue_head_t dp_close_wait; /* wait queue for close */
204 struct work_struct dp_wakeup_work;
205 struct usb_serial_port *dp_port;
206};
207
208
209/* Local Function Declarations */
210
211static void digi_wakeup_write_lock(struct work_struct *work);
212static int digi_write_oob_command(struct usb_serial_port *port,
213 unsigned char *buf, int count, int interruptible);
214static int digi_write_inb_command(struct usb_serial_port *port,
215 unsigned char *buf, int count, unsigned long timeout);
216static int digi_set_modem_signals(struct usb_serial_port *port,
217 unsigned int modem_signals, int interruptible);
218static int digi_transmit_idle(struct usb_serial_port *port,
219 unsigned long timeout);
220static void digi_rx_throttle(struct tty_struct *tty);
221static void digi_rx_unthrottle(struct tty_struct *tty);
222static void digi_set_termios(struct tty_struct *tty,
223 struct usb_serial_port *port, struct ktermios *old_termios);
224static void digi_break_ctl(struct tty_struct *tty, int break_state);
225static int digi_tiocmget(struct tty_struct *tty);
226static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
227 unsigned int clear);
228static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
229 const unsigned char *buf, int count);
230static void digi_write_bulk_callback(struct urb *urb);
231static int digi_write_room(struct tty_struct *tty);
232static int digi_chars_in_buffer(struct tty_struct *tty);
233static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
234static void digi_close(struct usb_serial_port *port);
235static void digi_dtr_rts(struct usb_serial_port *port, int on);
236static int digi_startup_device(struct usb_serial *serial);
237static int digi_startup(struct usb_serial *serial);
238static void digi_disconnect(struct usb_serial *serial);
239static void digi_release(struct usb_serial *serial);
240static int digi_port_probe(struct usb_serial_port *port);
241static int digi_port_remove(struct usb_serial_port *port);
242static void digi_read_bulk_callback(struct urb *urb);
243static int digi_read_inb_callback(struct urb *urb);
244static int digi_read_oob_callback(struct urb *urb);
245
246
247static const struct usb_device_id id_table_combined[] = {
248 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
249 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
250 { } /* Terminating entry */
251};
252
253static const struct usb_device_id id_table_2[] = {
254 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
255 { } /* Terminating entry */
256};
257
258static const struct usb_device_id id_table_4[] = {
259 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
260 { } /* Terminating entry */
261};
262
263MODULE_DEVICE_TABLE(usb, id_table_combined);
264
265/* device info needed for the Digi serial converter */
266
267static struct usb_serial_driver digi_acceleport_2_device = {
268 .driver = {
269 .owner = THIS_MODULE,
270 .name = "digi_2",
271 },
272 .description = "Digi 2 port USB adapter",
273 .id_table = id_table_2,
274 .num_ports = 3,
275 .open = digi_open,
276 .close = digi_close,
277 .dtr_rts = digi_dtr_rts,
278 .write = digi_write,
279 .write_room = digi_write_room,
280 .write_bulk_callback = digi_write_bulk_callback,
281 .read_bulk_callback = digi_read_bulk_callback,
282 .chars_in_buffer = digi_chars_in_buffer,
283 .throttle = digi_rx_throttle,
284 .unthrottle = digi_rx_unthrottle,
285 .set_termios = digi_set_termios,
286 .break_ctl = digi_break_ctl,
287 .tiocmget = digi_tiocmget,
288 .tiocmset = digi_tiocmset,
289 .attach = digi_startup,
290 .disconnect = digi_disconnect,
291 .release = digi_release,
292 .port_probe = digi_port_probe,
293 .port_remove = digi_port_remove,
294};
295
296static struct usb_serial_driver digi_acceleport_4_device = {
297 .driver = {
298 .owner = THIS_MODULE,
299 .name = "digi_4",
300 },
301 .description = "Digi 4 port USB adapter",
302 .id_table = id_table_4,
303 .num_ports = 4,
304 .open = digi_open,
305 .close = digi_close,
306 .write = digi_write,
307 .write_room = digi_write_room,
308 .write_bulk_callback = digi_write_bulk_callback,
309 .read_bulk_callback = digi_read_bulk_callback,
310 .chars_in_buffer = digi_chars_in_buffer,
311 .throttle = digi_rx_throttle,
312 .unthrottle = digi_rx_unthrottle,
313 .set_termios = digi_set_termios,
314 .break_ctl = digi_break_ctl,
315 .tiocmget = digi_tiocmget,
316 .tiocmset = digi_tiocmset,
317 .attach = digi_startup,
318 .disconnect = digi_disconnect,
319 .release = digi_release,
320 .port_probe = digi_port_probe,
321 .port_remove = digi_port_remove,
322};
323
324static struct usb_serial_driver * const serial_drivers[] = {
325 &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
326};
327
328/* Functions */
329
330/*
331 * Cond Wait Interruptible Timeout Irqrestore
332 *
333 * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
334 * so that wake ups are not lost if they occur between the unlock
335 * and the sleep. In other words, spin_unlock_irqrestore and
336 * interruptible_sleep_on_timeout are "atomic" with respect to
337 * wake ups. This is used to implement condition variables.
338 *
339 * interruptible_sleep_on_timeout is deprecated and has been replaced
340 * with the equivalent code.
341 */
342
343static long cond_wait_interruptible_timeout_irqrestore(
344 wait_queue_head_t *q, long timeout,
345 spinlock_t *lock, unsigned long flags)
346__releases(lock)
347{
348 DEFINE_WAIT(wait);
349
350 prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
351 spin_unlock_irqrestore(lock, flags);
352 timeout = schedule_timeout(timeout);
353 finish_wait(q, &wait);
354
355 return timeout;
356}
357
358
359/*
360 * Digi Wakeup Write
361 *
362 * Wake up port, line discipline, and tty processes sleeping
363 * on writes.
364 */
365
366static void digi_wakeup_write_lock(struct work_struct *work)
367{
368 struct digi_port *priv =
369 container_of(work, struct digi_port, dp_wakeup_work);
370 struct usb_serial_port *port = priv->dp_port;
371 unsigned long flags;
372
373 spin_lock_irqsave(&priv->dp_port_lock, flags);
374 tty_port_tty_wakeup(&port->port);
375 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
376}
377
378/*
379 * Digi Write OOB Command
380 *
381 * Write commands on the out of band port. Commands are 4
382 * bytes each, multiple commands can be sent at once, and
383 * no command will be split across USB packets. Returns 0
384 * if successful, -EINTR if interrupted while sleeping and
385 * the interruptible flag is true, or a negative error
386 * returned by usb_submit_urb.
387 */
388
389static int digi_write_oob_command(struct usb_serial_port *port,
390 unsigned char *buf, int count, int interruptible)
391{
392 int ret = 0;
393 int len;
394 struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
395 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
396 unsigned long flags = 0;
397
398 dev_dbg(&port->dev,
399 "digi_write_oob_command: TOP: port=%d, count=%d\n",
400 oob_priv->dp_port_num, count);
401
402 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
403 while (count > 0) {
404 while (oob_priv->dp_write_urb_in_use) {
405 cond_wait_interruptible_timeout_irqrestore(
406 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
407 &oob_priv->dp_port_lock, flags);
408 if (interruptible && signal_pending(current))
409 return -EINTR;
410 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
411 }
412
413 /* len must be a multiple of 4, so commands are not split */
414 len = min(count, oob_port->bulk_out_size);
415 if (len > 4)
416 len &= ~3;
417 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
418 oob_port->write_urb->transfer_buffer_length = len;
419 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
420 if (ret == 0) {
421 oob_priv->dp_write_urb_in_use = 1;
422 count -= len;
423 buf += len;
424 }
425 }
426 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
427 if (ret)
428 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
429 __func__, ret);
430 return ret;
431
432}
433
434
435/*
436 * Digi Write In Band Command
437 *
438 * Write commands on the given port. Commands are 4
439 * bytes each, multiple commands can be sent at once, and
440 * no command will be split across USB packets. If timeout
441 * is non-zero, write in band command will return after
442 * waiting unsuccessfully for the URB status to clear for
443 * timeout ticks. Returns 0 if successful, or a negative
444 * error returned by digi_write.
445 */
446
447static int digi_write_inb_command(struct usb_serial_port *port,
448 unsigned char *buf, int count, unsigned long timeout)
449{
450 int ret = 0;
451 int len;
452 struct digi_port *priv = usb_get_serial_port_data(port);
453 unsigned char *data = port->write_urb->transfer_buffer;
454 unsigned long flags = 0;
455
456 dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
457 priv->dp_port_num, count);
458
459 if (timeout)
460 timeout += jiffies;
461 else
462 timeout = ULONG_MAX;
463
464 spin_lock_irqsave(&priv->dp_port_lock, flags);
465 while (count > 0 && ret == 0) {
466 while (priv->dp_write_urb_in_use &&
467 time_before(jiffies, timeout)) {
468 cond_wait_interruptible_timeout_irqrestore(
469 &port->write_wait, DIGI_RETRY_TIMEOUT,
470 &priv->dp_port_lock, flags);
471 if (signal_pending(current))
472 return -EINTR;
473 spin_lock_irqsave(&priv->dp_port_lock, flags);
474 }
475
476 /* len must be a multiple of 4 and small enough to */
477 /* guarantee the write will send buffered data first, */
478 /* so commands are in order with data and not split */
479 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
480 if (len > 4)
481 len &= ~3;
482
483 /* write any buffered data first */
484 if (priv->dp_out_buf_len > 0) {
485 data[0] = DIGI_CMD_SEND_DATA;
486 data[1] = priv->dp_out_buf_len;
487 memcpy(data + 2, priv->dp_out_buf,
488 priv->dp_out_buf_len);
489 memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
490 port->write_urb->transfer_buffer_length
491 = priv->dp_out_buf_len + 2 + len;
492 } else {
493 memcpy(data, buf, len);
494 port->write_urb->transfer_buffer_length = len;
495 }
496
497 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
498 if (ret == 0) {
499 priv->dp_write_urb_in_use = 1;
500 priv->dp_out_buf_len = 0;
501 count -= len;
502 buf += len;
503 }
504
505 }
506 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
507
508 if (ret)
509 dev_err(&port->dev,
510 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
511 __func__, ret, priv->dp_port_num);
512 return ret;
513}
514
515
516/*
517 * Digi Set Modem Signals
518 *
519 * Sets or clears DTR and RTS on the port, according to the
520 * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
521 * for the modem_signals argument. Returns 0 if successful,
522 * -EINTR if interrupted while sleeping, or a non-zero error
523 * returned by usb_submit_urb.
524 */
525
526static int digi_set_modem_signals(struct usb_serial_port *port,
527 unsigned int modem_signals, int interruptible)
528{
529
530 int ret;
531 struct digi_port *port_priv = usb_get_serial_port_data(port);
532 struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
533 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
534 unsigned char *data = oob_port->write_urb->transfer_buffer;
535 unsigned long flags = 0;
536
537
538 dev_dbg(&port->dev,
539 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
540 port_priv->dp_port_num, modem_signals);
541
542 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
543 spin_lock(&port_priv->dp_port_lock);
544
545 while (oob_priv->dp_write_urb_in_use) {
546 spin_unlock(&port_priv->dp_port_lock);
547 cond_wait_interruptible_timeout_irqrestore(
548 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
549 &oob_priv->dp_port_lock, flags);
550 if (interruptible && signal_pending(current))
551 return -EINTR;
552 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
553 spin_lock(&port_priv->dp_port_lock);
554 }
555 data[0] = DIGI_CMD_SET_DTR_SIGNAL;
556 data[1] = port_priv->dp_port_num;
557 data[2] = (modem_signals & TIOCM_DTR) ?
558 DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
559 data[3] = 0;
560 data[4] = DIGI_CMD_SET_RTS_SIGNAL;
561 data[5] = port_priv->dp_port_num;
562 data[6] = (modem_signals & TIOCM_RTS) ?
563 DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
564 data[7] = 0;
565
566 oob_port->write_urb->transfer_buffer_length = 8;
567
568 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
569 if (ret == 0) {
570 oob_priv->dp_write_urb_in_use = 1;
571 port_priv->dp_modem_signals =
572 (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
573 | (modem_signals&(TIOCM_DTR|TIOCM_RTS));
574 }
575 spin_unlock(&port_priv->dp_port_lock);
576 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
577 if (ret)
578 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
579 __func__, ret);
580 return ret;
581}
582
583/*
584 * Digi Transmit Idle
585 *
586 * Digi transmit idle waits, up to timeout ticks, for the transmitter
587 * to go idle. It returns 0 if successful or a negative error.
588 *
589 * There are race conditions here if more than one process is calling
590 * digi_transmit_idle on the same port at the same time. However, this
591 * is only called from close, and only one process can be in close on a
592 * port at a time, so its ok.
593 */
594
595static int digi_transmit_idle(struct usb_serial_port *port,
596 unsigned long timeout)
597{
598 int ret;
599 unsigned char buf[2];
600 struct digi_port *priv = usb_get_serial_port_data(port);
601 unsigned long flags = 0;
602
603 spin_lock_irqsave(&priv->dp_port_lock, flags);
604 priv->dp_transmit_idle = 0;
605 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
606
607 buf[0] = DIGI_CMD_TRANSMIT_IDLE;
608 buf[1] = 0;
609
610 timeout += jiffies;
611
612 ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
613 if (ret != 0)
614 return ret;
615
616 spin_lock_irqsave(&priv->dp_port_lock, flags);
617
618 while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
619 cond_wait_interruptible_timeout_irqrestore(
620 &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
621 &priv->dp_port_lock, flags);
622 if (signal_pending(current))
623 return -EINTR;
624 spin_lock_irqsave(&priv->dp_port_lock, flags);
625 }
626 priv->dp_transmit_idle = 0;
627 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
628 return 0;
629
630}
631
632
633static void digi_rx_throttle(struct tty_struct *tty)
634{
635 unsigned long flags;
636 struct usb_serial_port *port = tty->driver_data;
637 struct digi_port *priv = usb_get_serial_port_data(port);
638
639 /* stop receiving characters by not resubmitting the read urb */
640 spin_lock_irqsave(&priv->dp_port_lock, flags);
641 priv->dp_throttled = 1;
642 priv->dp_throttle_restart = 0;
643 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
644}
645
646
647static void digi_rx_unthrottle(struct tty_struct *tty)
648{
649 int ret = 0;
650 unsigned long flags;
651 struct usb_serial_port *port = tty->driver_data;
652 struct digi_port *priv = usb_get_serial_port_data(port);
653
654 spin_lock_irqsave(&priv->dp_port_lock, flags);
655
656 /* restart read chain */
657 if (priv->dp_throttle_restart)
658 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
659
660 /* turn throttle off */
661 priv->dp_throttled = 0;
662 priv->dp_throttle_restart = 0;
663
664 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
665
666 if (ret)
667 dev_err(&port->dev,
668 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
669 __func__, ret, priv->dp_port_num);
670}
671
672
673static void digi_set_termios(struct tty_struct *tty,
674 struct usb_serial_port *port, struct ktermios *old_termios)
675{
676 struct digi_port *priv = usb_get_serial_port_data(port);
677 struct device *dev = &port->dev;
678 unsigned int iflag = tty->termios.c_iflag;
679 unsigned int cflag = tty->termios.c_cflag;
680 unsigned int old_iflag = old_termios->c_iflag;
681 unsigned int old_cflag = old_termios->c_cflag;
682 unsigned char buf[32];
683 unsigned int modem_signals;
684 int arg, ret;
685 int i = 0;
686 speed_t baud;
687
688 dev_dbg(dev,
689 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
690 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
691
692 /* set baud rate */
693 baud = tty_get_baud_rate(tty);
694 if (baud != tty_termios_baud_rate(old_termios)) {
695 arg = -1;
696
697 /* reassert DTR and (maybe) RTS on transition from B0 */
698 if ((old_cflag & CBAUD) == B0) {
699 /* don't set RTS if using hardware flow control */
700 /* and throttling input */
701 modem_signals = TIOCM_DTR;
702 if (!C_CRTSCTS(tty) ||
703 !test_bit(TTY_THROTTLED, &tty->flags))
704 modem_signals |= TIOCM_RTS;
705 digi_set_modem_signals(port, modem_signals, 1);
706 }
707 switch (baud) {
708 /* drop DTR and RTS on transition to B0 */
709 case 0: digi_set_modem_signals(port, 0, 1); break;
710 case 50: arg = DIGI_BAUD_50; break;
711 case 75: arg = DIGI_BAUD_75; break;
712 case 110: arg = DIGI_BAUD_110; break;
713 case 150: arg = DIGI_BAUD_150; break;
714 case 200: arg = DIGI_BAUD_200; break;
715 case 300: arg = DIGI_BAUD_300; break;
716 case 600: arg = DIGI_BAUD_600; break;
717 case 1200: arg = DIGI_BAUD_1200; break;
718 case 1800: arg = DIGI_BAUD_1800; break;
719 case 2400: arg = DIGI_BAUD_2400; break;
720 case 4800: arg = DIGI_BAUD_4800; break;
721 case 9600: arg = DIGI_BAUD_9600; break;
722 case 19200: arg = DIGI_BAUD_19200; break;
723 case 38400: arg = DIGI_BAUD_38400; break;
724 case 57600: arg = DIGI_BAUD_57600; break;
725 case 115200: arg = DIGI_BAUD_115200; break;
726 case 230400: arg = DIGI_BAUD_230400; break;
727 case 460800: arg = DIGI_BAUD_460800; break;
728 default:
729 arg = DIGI_BAUD_9600;
730 baud = 9600;
731 break;
732 }
733 if (arg != -1) {
734 buf[i++] = DIGI_CMD_SET_BAUD_RATE;
735 buf[i++] = priv->dp_port_num;
736 buf[i++] = arg;
737 buf[i++] = 0;
738 }
739 }
740 /* set parity */
741 tty->termios.c_cflag &= ~CMSPAR;
742
743 if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
744 if (cflag&PARENB) {
745 if (cflag&PARODD)
746 arg = DIGI_PARITY_ODD;
747 else
748 arg = DIGI_PARITY_EVEN;
749 } else {
750 arg = DIGI_PARITY_NONE;
751 }
752 buf[i++] = DIGI_CMD_SET_PARITY;
753 buf[i++] = priv->dp_port_num;
754 buf[i++] = arg;
755 buf[i++] = 0;
756 }
757 /* set word size */
758 if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
759 arg = -1;
760 switch (cflag&CSIZE) {
761 case CS5: arg = DIGI_WORD_SIZE_5; break;
762 case CS6: arg = DIGI_WORD_SIZE_6; break;
763 case CS7: arg = DIGI_WORD_SIZE_7; break;
764 case CS8: arg = DIGI_WORD_SIZE_8; break;
765 default:
766 dev_dbg(dev,
767 "digi_set_termios: can't handle word size %d\n",
768 (cflag&CSIZE));
769 break;
770 }
771
772 if (arg != -1) {
773 buf[i++] = DIGI_CMD_SET_WORD_SIZE;
774 buf[i++] = priv->dp_port_num;
775 buf[i++] = arg;
776 buf[i++] = 0;
777 }
778
779 }
780
781 /* set stop bits */
782 if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
783
784 if ((cflag&CSTOPB))
785 arg = DIGI_STOP_BITS_2;
786 else
787 arg = DIGI_STOP_BITS_1;
788
789 buf[i++] = DIGI_CMD_SET_STOP_BITS;
790 buf[i++] = priv->dp_port_num;
791 buf[i++] = arg;
792 buf[i++] = 0;
793
794 }
795
796 /* set input flow control */
797 if ((iflag&IXOFF) != (old_iflag&IXOFF)
798 || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
799 arg = 0;
800 if (iflag&IXOFF)
801 arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
802 else
803 arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
804
805 if (cflag&CRTSCTS) {
806 arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
807
808 /* On USB-4 it is necessary to assert RTS prior */
809 /* to selecting RTS input flow control. */
810 buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
811 buf[i++] = priv->dp_port_num;
812 buf[i++] = DIGI_RTS_ACTIVE;
813 buf[i++] = 0;
814
815 } else {
816 arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
817 }
818 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
819 buf[i++] = priv->dp_port_num;
820 buf[i++] = arg;
821 buf[i++] = 0;
822 }
823
824 /* set output flow control */
825 if ((iflag & IXON) != (old_iflag & IXON)
826 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
827 arg = 0;
828 if (iflag & IXON)
829 arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
830 else
831 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
832
833 if (cflag & CRTSCTS) {
834 arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
835 } else {
836 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
837 }
838
839 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
840 buf[i++] = priv->dp_port_num;
841 buf[i++] = arg;
842 buf[i++] = 0;
843 }
844
845 /* set receive enable/disable */
846 if ((cflag & CREAD) != (old_cflag & CREAD)) {
847 if (cflag & CREAD)
848 arg = DIGI_ENABLE;
849 else
850 arg = DIGI_DISABLE;
851
852 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
853 buf[i++] = priv->dp_port_num;
854 buf[i++] = arg;
855 buf[i++] = 0;
856 }
857 ret = digi_write_oob_command(port, buf, i, 1);
858 if (ret != 0)
859 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
860 tty_encode_baud_rate(tty, baud, baud);
861}
862
863
864static void digi_break_ctl(struct tty_struct *tty, int break_state)
865{
866 struct usb_serial_port *port = tty->driver_data;
867 unsigned char buf[4];
868
869 buf[0] = DIGI_CMD_BREAK_CONTROL;
870 buf[1] = 2; /* length */
871 buf[2] = break_state ? 1 : 0;
872 buf[3] = 0; /* pad */
873 digi_write_inb_command(port, buf, 4, 0);
874}
875
876
877static int digi_tiocmget(struct tty_struct *tty)
878{
879 struct usb_serial_port *port = tty->driver_data;
880 struct digi_port *priv = usb_get_serial_port_data(port);
881 unsigned int val;
882 unsigned long flags;
883
884 spin_lock_irqsave(&priv->dp_port_lock, flags);
885 val = priv->dp_modem_signals;
886 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
887 return val;
888}
889
890
891static int digi_tiocmset(struct tty_struct *tty,
892 unsigned int set, unsigned int clear)
893{
894 struct usb_serial_port *port = tty->driver_data;
895 struct digi_port *priv = usb_get_serial_port_data(port);
896 unsigned int val;
897 unsigned long flags;
898
899 spin_lock_irqsave(&priv->dp_port_lock, flags);
900 val = (priv->dp_modem_signals & ~clear) | set;
901 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
902 return digi_set_modem_signals(port, val, 1);
903}
904
905
906static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
907 const unsigned char *buf, int count)
908{
909
910 int ret, data_len, new_len;
911 struct digi_port *priv = usb_get_serial_port_data(port);
912 unsigned char *data = port->write_urb->transfer_buffer;
913 unsigned long flags = 0;
914
915 dev_dbg(&port->dev,
916 "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
917 priv->dp_port_num, count, in_interrupt());
918
919 /* copy user data (which can sleep) before getting spin lock */
920 count = min(count, port->bulk_out_size-2);
921 count = min(64, count);
922
923 /* be sure only one write proceeds at a time */
924 /* there are races on the port private buffer */
925 spin_lock_irqsave(&priv->dp_port_lock, flags);
926
927 /* wait for urb status clear to submit another urb */
928 if (priv->dp_write_urb_in_use) {
929 /* buffer data if count is 1 (probably put_char) if possible */
930 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
931 priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
932 new_len = 1;
933 } else {
934 new_len = 0;
935 }
936 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
937 return new_len;
938 }
939
940 /* allow space for any buffered data and for new data, up to */
941 /* transfer buffer size - 2 (for command and length bytes) */
942 new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
943 data_len = new_len + priv->dp_out_buf_len;
944
945 if (data_len == 0) {
946 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
947 return 0;
948 }
949
950 port->write_urb->transfer_buffer_length = data_len+2;
951
952 *data++ = DIGI_CMD_SEND_DATA;
953 *data++ = data_len;
954
955 /* copy in buffered data first */
956 memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
957 data += priv->dp_out_buf_len;
958
959 /* copy in new data */
960 memcpy(data, buf, new_len);
961
962 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
963 if (ret == 0) {
964 priv->dp_write_urb_in_use = 1;
965 ret = new_len;
966 priv->dp_out_buf_len = 0;
967 }
968
969 /* return length of new data written, or error */
970 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
971 if (ret < 0)
972 dev_err_console(port,
973 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
974 __func__, ret, priv->dp_port_num);
975 dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
976 return ret;
977
978}
979
980static void digi_write_bulk_callback(struct urb *urb)
981{
982
983 struct usb_serial_port *port = urb->context;
984 struct usb_serial *serial;
985 struct digi_port *priv;
986 struct digi_serial *serial_priv;
987 int ret = 0;
988 int status = urb->status;
989
990 /* port and serial sanity check */
991 if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
992 pr_err("%s: port or port->private is NULL, status=%d\n",
993 __func__, status);
994 return;
995 }
996 serial = port->serial;
997 if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
998 dev_err(&port->dev,
999 "%s: serial or serial->private is NULL, status=%d\n",
1000 __func__, status);
1001 return;
1002 }
1003
1004 /* handle oob callback */
1005 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1006 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
1007 spin_lock(&priv->dp_port_lock);
1008 priv->dp_write_urb_in_use = 0;
1009 wake_up_interruptible(&port->write_wait);
1010 spin_unlock(&priv->dp_port_lock);
1011 return;
1012 }
1013
1014 /* try to send any buffered data on this port */
1015 spin_lock(&priv->dp_port_lock);
1016 priv->dp_write_urb_in_use = 0;
1017 if (priv->dp_out_buf_len > 0) {
1018 *((unsigned char *)(port->write_urb->transfer_buffer))
1019 = (unsigned char)DIGI_CMD_SEND_DATA;
1020 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1021 = (unsigned char)priv->dp_out_buf_len;
1022 port->write_urb->transfer_buffer_length =
1023 priv->dp_out_buf_len + 2;
1024 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1025 priv->dp_out_buf_len);
1026 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1027 if (ret == 0) {
1028 priv->dp_write_urb_in_use = 1;
1029 priv->dp_out_buf_len = 0;
1030 }
1031 }
1032 /* wake up processes sleeping on writes immediately */
1033 tty_port_tty_wakeup(&port->port);
1034 /* also queue up a wakeup at scheduler time, in case we */
1035 /* lost the race in write_chan(). */
1036 schedule_work(&priv->dp_wakeup_work);
1037
1038 spin_unlock(&priv->dp_port_lock);
1039 if (ret && ret != -EPERM)
1040 dev_err_console(port,
1041 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1042 __func__, ret, priv->dp_port_num);
1043}
1044
1045static int digi_write_room(struct tty_struct *tty)
1046{
1047 struct usb_serial_port *port = tty->driver_data;
1048 struct digi_port *priv = usb_get_serial_port_data(port);
1049 int room;
1050 unsigned long flags = 0;
1051
1052 spin_lock_irqsave(&priv->dp_port_lock, flags);
1053
1054 if (priv->dp_write_urb_in_use)
1055 room = 0;
1056 else
1057 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1058
1059 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1060 dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room);
1061 return room;
1062
1063}
1064
1065static int digi_chars_in_buffer(struct tty_struct *tty)
1066{
1067 struct usb_serial_port *port = tty->driver_data;
1068 struct digi_port *priv = usb_get_serial_port_data(port);
1069
1070 if (priv->dp_write_urb_in_use) {
1071 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1072 priv->dp_port_num, port->bulk_out_size - 2);
1073 /* return(port->bulk_out_size - 2); */
1074 return 256;
1075 } else {
1076 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1077 priv->dp_port_num, priv->dp_out_buf_len);
1078 return priv->dp_out_buf_len;
1079 }
1080
1081}
1082
1083static void digi_dtr_rts(struct usb_serial_port *port, int on)
1084{
1085 /* Adjust DTR and RTS */
1086 digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
1087}
1088
1089static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1090{
1091 int ret;
1092 unsigned char buf[32];
1093 struct digi_port *priv = usb_get_serial_port_data(port);
1094 struct ktermios not_termios;
1095
1096 /* be sure the device is started up */
1097 if (digi_startup_device(port->serial) != 0)
1098 return -ENXIO;
1099
1100 /* read modem signals automatically whenever they change */
1101 buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1102 buf[1] = priv->dp_port_num;
1103 buf[2] = DIGI_ENABLE;
1104 buf[3] = 0;
1105
1106 /* flush fifos */
1107 buf[4] = DIGI_CMD_IFLUSH_FIFO;
1108 buf[5] = priv->dp_port_num;
1109 buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1110 buf[7] = 0;
1111
1112 ret = digi_write_oob_command(port, buf, 8, 1);
1113 if (ret != 0)
1114 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1115
1116 /* set termios settings */
1117 if (tty) {
1118 not_termios.c_cflag = ~tty->termios.c_cflag;
1119 not_termios.c_iflag = ~tty->termios.c_iflag;
1120 digi_set_termios(tty, port, ¬_termios);
1121 }
1122 return 0;
1123}
1124
1125
1126static void digi_close(struct usb_serial_port *port)
1127{
1128 DEFINE_WAIT(wait);
1129 int ret;
1130 unsigned char buf[32];
1131 struct digi_port *priv = usb_get_serial_port_data(port);
1132
1133 mutex_lock(&port->serial->disc_mutex);
1134 /* if disconnected, just clear flags */
1135 if (port->serial->disconnected)
1136 goto exit;
1137
1138 /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1139 digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1140
1141 /* disable input flow control */
1142 buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1143 buf[1] = priv->dp_port_num;
1144 buf[2] = DIGI_DISABLE;
1145 buf[3] = 0;
1146
1147 /* disable output flow control */
1148 buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1149 buf[5] = priv->dp_port_num;
1150 buf[6] = DIGI_DISABLE;
1151 buf[7] = 0;
1152
1153 /* disable reading modem signals automatically */
1154 buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1155 buf[9] = priv->dp_port_num;
1156 buf[10] = DIGI_DISABLE;
1157 buf[11] = 0;
1158
1159 /* disable receive */
1160 buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1161 buf[13] = priv->dp_port_num;
1162 buf[14] = DIGI_DISABLE;
1163 buf[15] = 0;
1164
1165 /* flush fifos */
1166 buf[16] = DIGI_CMD_IFLUSH_FIFO;
1167 buf[17] = priv->dp_port_num;
1168 buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1169 buf[19] = 0;
1170
1171 ret = digi_write_oob_command(port, buf, 20, 0);
1172 if (ret != 0)
1173 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1174 ret);
1175 /* wait for final commands on oob port to complete */
1176 prepare_to_wait(&priv->dp_flush_wait, &wait,
1177 TASK_INTERRUPTIBLE);
1178 schedule_timeout(DIGI_CLOSE_TIMEOUT);
1179 finish_wait(&priv->dp_flush_wait, &wait);
1180
1181 /* shutdown any outstanding bulk writes */
1182 usb_kill_urb(port->write_urb);
1183exit:
1184 spin_lock_irq(&priv->dp_port_lock);
1185 priv->dp_write_urb_in_use = 0;
1186 wake_up_interruptible(&priv->dp_close_wait);
1187 spin_unlock_irq(&priv->dp_port_lock);
1188 mutex_unlock(&port->serial->disc_mutex);
1189}
1190
1191
1192/*
1193 * Digi Startup Device
1194 *
1195 * Starts reads on all ports. Must be called AFTER startup, with
1196 * urbs initialized. Returns 0 if successful, non-zero error otherwise.
1197 */
1198
1199static int digi_startup_device(struct usb_serial *serial)
1200{
1201 int i, ret = 0;
1202 struct digi_serial *serial_priv = usb_get_serial_data(serial);
1203 struct usb_serial_port *port;
1204
1205 /* be sure this happens exactly once */
1206 spin_lock(&serial_priv->ds_serial_lock);
1207 if (serial_priv->ds_device_started) {
1208 spin_unlock(&serial_priv->ds_serial_lock);
1209 return 0;
1210 }
1211 serial_priv->ds_device_started = 1;
1212 spin_unlock(&serial_priv->ds_serial_lock);
1213
1214 /* start reading from each bulk in endpoint for the device */
1215 /* set USB_DISABLE_SPD flag for write bulk urbs */
1216 for (i = 0; i < serial->type->num_ports + 1; i++) {
1217 port = serial->port[i];
1218 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1219 if (ret != 0) {
1220 dev_err(&port->dev,
1221 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1222 __func__, ret, i);
1223 break;
1224 }
1225 }
1226 return ret;
1227}
1228
1229static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1230{
1231 struct digi_port *priv;
1232
1233 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1234 if (!priv)
1235 return -ENOMEM;
1236
1237 spin_lock_init(&priv->dp_port_lock);
1238 priv->dp_port_num = port_num;
1239 init_waitqueue_head(&priv->dp_transmit_idle_wait);
1240 init_waitqueue_head(&priv->dp_flush_wait);
1241 init_waitqueue_head(&priv->dp_close_wait);
1242 INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
1243 priv->dp_port = port;
1244
1245 init_waitqueue_head(&port->write_wait);
1246
1247 usb_set_serial_port_data(port, priv);
1248
1249 return 0;
1250}
1251
1252static int digi_startup(struct usb_serial *serial)
1253{
1254 struct device *dev = &serial->interface->dev;
1255 struct digi_serial *serial_priv;
1256 int ret;
1257 int i;
1258
1259 /* check whether the device has the expected number of endpoints */
1260 if (serial->num_port_pointers < serial->type->num_ports + 1) {
1261 dev_err(dev, "OOB endpoints missing\n");
1262 return -ENODEV;
1263 }
1264
1265 for (i = 0; i < serial->type->num_ports + 1 ; i++) {
1266 if (!serial->port[i]->read_urb) {
1267 dev_err(dev, "bulk-in endpoint missing\n");
1268 return -ENODEV;
1269 }
1270 if (!serial->port[i]->write_urb) {
1271 dev_err(dev, "bulk-out endpoint missing\n");
1272 return -ENODEV;
1273 }
1274 }
1275
1276 serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1277 if (!serial_priv)
1278 return -ENOMEM;
1279
1280 spin_lock_init(&serial_priv->ds_serial_lock);
1281 serial_priv->ds_oob_port_num = serial->type->num_ports;
1282 serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1283
1284 ret = digi_port_init(serial_priv->ds_oob_port,
1285 serial_priv->ds_oob_port_num);
1286 if (ret) {
1287 kfree(serial_priv);
1288 return ret;
1289 }
1290
1291 usb_set_serial_data(serial, serial_priv);
1292
1293 return 0;
1294}
1295
1296
1297static void digi_disconnect(struct usb_serial *serial)
1298{
1299 int i;
1300
1301 /* stop reads and writes on all ports */
1302 for (i = 0; i < serial->type->num_ports + 1; i++) {
1303 usb_kill_urb(serial->port[i]->read_urb);
1304 usb_kill_urb(serial->port[i]->write_urb);
1305 }
1306}
1307
1308
1309static void digi_release(struct usb_serial *serial)
1310{
1311 struct digi_serial *serial_priv;
1312 struct digi_port *priv;
1313
1314 serial_priv = usb_get_serial_data(serial);
1315
1316 priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1317 kfree(priv);
1318
1319 kfree(serial_priv);
1320}
1321
1322static int digi_port_probe(struct usb_serial_port *port)
1323{
1324 return digi_port_init(port, port->port_number);
1325}
1326
1327static int digi_port_remove(struct usb_serial_port *port)
1328{
1329 struct digi_port *priv;
1330
1331 priv = usb_get_serial_port_data(port);
1332 kfree(priv);
1333
1334 return 0;
1335}
1336
1337static void digi_read_bulk_callback(struct urb *urb)
1338{
1339 struct usb_serial_port *port = urb->context;
1340 struct digi_port *priv;
1341 struct digi_serial *serial_priv;
1342 int ret;
1343 int status = urb->status;
1344
1345 /* port sanity check, do not resubmit if port is not valid */
1346 if (port == NULL)
1347 return;
1348 priv = usb_get_serial_port_data(port);
1349 if (priv == NULL) {
1350 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1351 __func__, status);
1352 return;
1353 }
1354 if (port->serial == NULL ||
1355 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1356 dev_err(&port->dev, "%s: serial is bad or serial->private "
1357 "is NULL, status=%d\n", __func__, status);
1358 return;
1359 }
1360
1361 /* do not resubmit urb if it has any status error */
1362 if (status) {
1363 dev_err(&port->dev,
1364 "%s: nonzero read bulk status: status=%d, port=%d\n",
1365 __func__, status, priv->dp_port_num);
1366 return;
1367 }
1368
1369 /* handle oob or inb callback, do not resubmit if error */
1370 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1371 if (digi_read_oob_callback(urb) != 0)
1372 return;
1373 } else {
1374 if (digi_read_inb_callback(urb) != 0)
1375 return;
1376 }
1377
1378 /* continue read */
1379 ret = usb_submit_urb(urb, GFP_ATOMIC);
1380 if (ret != 0 && ret != -EPERM) {
1381 dev_err(&port->dev,
1382 "%s: failed resubmitting urb, ret=%d, port=%d\n",
1383 __func__, ret, priv->dp_port_num);
1384 }
1385
1386}
1387
1388/*
1389 * Digi Read INB Callback
1390 *
1391 * Digi Read INB Callback handles reads on the in band ports, sending
1392 * the data on to the tty subsystem. When called we know port and
1393 * port->private are not NULL and port->serial has been validated.
1394 * It returns 0 if successful, 1 if successful but the port is
1395 * throttled, and -1 if the sanity checks failed.
1396 */
1397
1398static int digi_read_inb_callback(struct urb *urb)
1399{
1400 struct usb_serial_port *port = urb->context;
1401 struct digi_port *priv = usb_get_serial_port_data(port);
1402 int opcode = ((unsigned char *)urb->transfer_buffer)[0];
1403 int len = ((unsigned char *)urb->transfer_buffer)[1];
1404 int port_status = ((unsigned char *)urb->transfer_buffer)[2];
1405 unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
1406 int flag, throttled;
1407 int status = urb->status;
1408
1409 /* do not process callbacks on closed ports */
1410 /* but do continue the read chain */
1411 if (urb->status == -ENOENT)
1412 return 0;
1413
1414 /* short/multiple packet check */
1415 if (urb->actual_length != len + 2) {
1416 dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
1417 "status=%d, port=%d, opcode=%d, len=%d, "
1418 "actual_length=%d, status=%d\n", __func__, status,
1419 priv->dp_port_num, opcode, len, urb->actual_length,
1420 port_status);
1421 return -1;
1422 }
1423
1424 spin_lock(&priv->dp_port_lock);
1425
1426 /* check for throttle; if set, do not resubmit read urb */
1427 /* indicate the read chain needs to be restarted on unthrottle */
1428 throttled = priv->dp_throttled;
1429 if (throttled)
1430 priv->dp_throttle_restart = 1;
1431
1432 /* receive data */
1433 if (opcode == DIGI_CMD_RECEIVE_DATA) {
1434 /* get flag from port_status */
1435 flag = 0;
1436
1437 /* overrun is special, not associated with a char */
1438 if (port_status & DIGI_OVERRUN_ERROR)
1439 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1440
1441 /* break takes precedence over parity, */
1442 /* which takes precedence over framing errors */
1443 if (port_status & DIGI_BREAK_ERROR)
1444 flag = TTY_BREAK;
1445 else if (port_status & DIGI_PARITY_ERROR)
1446 flag = TTY_PARITY;
1447 else if (port_status & DIGI_FRAMING_ERROR)
1448 flag = TTY_FRAME;
1449
1450 /* data length is len-1 (one byte of len is port_status) */
1451 --len;
1452 if (len > 0) {
1453 tty_insert_flip_string_fixed_flag(&port->port, data,
1454 flag, len);
1455 tty_flip_buffer_push(&port->port);
1456 }
1457 }
1458 spin_unlock(&priv->dp_port_lock);
1459
1460 if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1461 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1462 else if (opcode != DIGI_CMD_RECEIVE_DATA)
1463 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1464
1465 return throttled ? 1 : 0;
1466
1467}
1468
1469
1470/*
1471 * Digi Read OOB Callback
1472 *
1473 * Digi Read OOB Callback handles reads on the out of band port.
1474 * When called we know port and port->private are not NULL and
1475 * the port->serial is valid. It returns 0 if successful, and
1476 * -1 if the sanity checks failed.
1477 */
1478
1479static int digi_read_oob_callback(struct urb *urb)
1480{
1481
1482 struct usb_serial_port *port = urb->context;
1483 struct usb_serial *serial = port->serial;
1484 struct tty_struct *tty;
1485 struct digi_port *priv = usb_get_serial_port_data(port);
1486 int opcode, line, status, val;
1487 int i;
1488 unsigned int rts;
1489
1490 /* handle each oob command */
1491 for (i = 0; i < urb->actual_length - 3;) {
1492 opcode = ((unsigned char *)urb->transfer_buffer)[i++];
1493 line = ((unsigned char *)urb->transfer_buffer)[i++];
1494 status = ((unsigned char *)urb->transfer_buffer)[i++];
1495 val = ((unsigned char *)urb->transfer_buffer)[i++];
1496
1497 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1498 opcode, line, status, val);
1499
1500 if (status != 0 || line >= serial->type->num_ports)
1501 continue;
1502
1503 port = serial->port[line];
1504
1505 priv = usb_get_serial_port_data(port);
1506 if (priv == NULL)
1507 return -1;
1508
1509 tty = tty_port_tty_get(&port->port);
1510
1511 rts = 0;
1512 if (tty)
1513 rts = C_CRTSCTS(tty);
1514
1515 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1516 spin_lock(&priv->dp_port_lock);
1517 /* convert from digi flags to termiox flags */
1518 if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1519 priv->dp_modem_signals |= TIOCM_CTS;
1520 /* port must be open to use tty struct */
1521 if (rts)
1522 tty_port_tty_wakeup(&port->port);
1523 } else {
1524 priv->dp_modem_signals &= ~TIOCM_CTS;
1525 /* port must be open to use tty struct */
1526 }
1527 if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1528 priv->dp_modem_signals |= TIOCM_DSR;
1529 else
1530 priv->dp_modem_signals &= ~TIOCM_DSR;
1531 if (val & DIGI_READ_INPUT_SIGNALS_RI)
1532 priv->dp_modem_signals |= TIOCM_RI;
1533 else
1534 priv->dp_modem_signals &= ~TIOCM_RI;
1535 if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1536 priv->dp_modem_signals |= TIOCM_CD;
1537 else
1538 priv->dp_modem_signals &= ~TIOCM_CD;
1539
1540 spin_unlock(&priv->dp_port_lock);
1541 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1542 spin_lock(&priv->dp_port_lock);
1543 priv->dp_transmit_idle = 1;
1544 wake_up_interruptible(&priv->dp_transmit_idle_wait);
1545 spin_unlock(&priv->dp_port_lock);
1546 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1547 wake_up_interruptible(&priv->dp_flush_wait);
1548 }
1549 tty_kref_put(tty);
1550 }
1551 return 0;
1552
1553}
1554
1555module_usb_serial_driver(serial_drivers, id_table_combined);
1556
1557MODULE_AUTHOR(DRIVER_AUTHOR);
1558MODULE_DESCRIPTION(DRIVER_DESC);
1559MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3* Digi AccelePort USB-4 and USB-2 Serial Converters
4*
5* Copyright 2000 by Digi International
6*
7* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
8* usb-serial driver.
9*
10* Peter Berger (pberger@brimson.com)
11* Al Borchers (borchers@steinerpoint.com)
12*/
13
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_driver.h>
19#include <linux/tty_flip.h>
20#include <linux/module.h>
21#include <linux/spinlock.h>
22#include <linux/uaccess.h>
23#include <linux/usb.h>
24#include <linux/wait.h>
25#include <linux/sched/signal.h>
26#include <linux/usb/serial.h>
27
28/* Defines */
29
30#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
31#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
32
33/* port output buffer length -- must be <= transfer buffer length - 2 */
34/* so we can be sure to send the full buffer in one urb */
35#define DIGI_OUT_BUF_SIZE 8
36
37/* port input buffer length -- must be >= transfer buffer length - 3 */
38/* so we can be sure to hold at least one full buffer from one urb */
39#define DIGI_IN_BUF_SIZE 64
40
41/* retry timeout while sleeping */
42#define DIGI_RETRY_TIMEOUT (HZ/10)
43
44/* timeout while waiting for tty output to drain in close */
45/* this delay is used twice in close, so the total delay could */
46/* be twice this value */
47#define DIGI_CLOSE_TIMEOUT (5*HZ)
48
49
50/* AccelePort USB Defines */
51
52/* ids */
53#define DIGI_VENDOR_ID 0x05c5
54#define DIGI_2_ID 0x0002 /* USB-2 */
55#define DIGI_4_ID 0x0004 /* USB-4 */
56
57/* commands
58 * "INB": can be used on the in-band endpoint
59 * "OOB": can be used on the out-of-band endpoint
60 */
61#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
62#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
63#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
64#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
65#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
66#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
67#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
68#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
69#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
70#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
71#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
72#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
73#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
74#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
75#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
76#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
77#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
78#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
79#define DIGI_CMD_SEND_DATA 18 /* INB */
80#define DIGI_CMD_RECEIVE_DATA 19 /* INB */
81#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
82#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
83
84/* baud rates */
85#define DIGI_BAUD_50 0
86#define DIGI_BAUD_75 1
87#define DIGI_BAUD_110 2
88#define DIGI_BAUD_150 3
89#define DIGI_BAUD_200 4
90#define DIGI_BAUD_300 5
91#define DIGI_BAUD_600 6
92#define DIGI_BAUD_1200 7
93#define DIGI_BAUD_1800 8
94#define DIGI_BAUD_2400 9
95#define DIGI_BAUD_4800 10
96#define DIGI_BAUD_7200 11
97#define DIGI_BAUD_9600 12
98#define DIGI_BAUD_14400 13
99#define DIGI_BAUD_19200 14
100#define DIGI_BAUD_28800 15
101#define DIGI_BAUD_38400 16
102#define DIGI_BAUD_57600 17
103#define DIGI_BAUD_76800 18
104#define DIGI_BAUD_115200 19
105#define DIGI_BAUD_153600 20
106#define DIGI_BAUD_230400 21
107#define DIGI_BAUD_460800 22
108
109/* arguments */
110#define DIGI_WORD_SIZE_5 0
111#define DIGI_WORD_SIZE_6 1
112#define DIGI_WORD_SIZE_7 2
113#define DIGI_WORD_SIZE_8 3
114
115#define DIGI_PARITY_NONE 0
116#define DIGI_PARITY_ODD 1
117#define DIGI_PARITY_EVEN 2
118#define DIGI_PARITY_MARK 3
119#define DIGI_PARITY_SPACE 4
120
121#define DIGI_STOP_BITS_1 0
122#define DIGI_STOP_BITS_2 1
123
124#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
125#define DIGI_INPUT_FLOW_CONTROL_RTS 2
126#define DIGI_INPUT_FLOW_CONTROL_DTR 4
127
128#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
129#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
130#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
131
132#define DIGI_DTR_INACTIVE 0
133#define DIGI_DTR_ACTIVE 1
134#define DIGI_DTR_INPUT_FLOW_CONTROL 2
135
136#define DIGI_RTS_INACTIVE 0
137#define DIGI_RTS_ACTIVE 1
138#define DIGI_RTS_INPUT_FLOW_CONTROL 2
139#define DIGI_RTS_TOGGLE 3
140
141#define DIGI_FLUSH_TX 1
142#define DIGI_FLUSH_RX 2
143#define DIGI_RESUME_TX 4 /* clears xoff condition */
144
145#define DIGI_TRANSMIT_NOT_IDLE 0
146#define DIGI_TRANSMIT_IDLE 1
147
148#define DIGI_DISABLE 0
149#define DIGI_ENABLE 1
150
151#define DIGI_DEASSERT 0
152#define DIGI_ASSERT 1
153
154/* in band status codes */
155#define DIGI_OVERRUN_ERROR 4
156#define DIGI_PARITY_ERROR 8
157#define DIGI_FRAMING_ERROR 16
158#define DIGI_BREAK_ERROR 32
159
160/* out of band status */
161#define DIGI_NO_ERROR 0
162#define DIGI_BAD_FIRST_PARAMETER 1
163#define DIGI_BAD_SECOND_PARAMETER 2
164#define DIGI_INVALID_LINE 3
165#define DIGI_INVALID_OPCODE 4
166
167/* input signals */
168#define DIGI_READ_INPUT_SIGNALS_SLOT 1
169#define DIGI_READ_INPUT_SIGNALS_ERR 2
170#define DIGI_READ_INPUT_SIGNALS_BUSY 4
171#define DIGI_READ_INPUT_SIGNALS_PE 8
172#define DIGI_READ_INPUT_SIGNALS_CTS 16
173#define DIGI_READ_INPUT_SIGNALS_DSR 32
174#define DIGI_READ_INPUT_SIGNALS_RI 64
175#define DIGI_READ_INPUT_SIGNALS_DCD 128
176
177
178/* Structures */
179
180struct digi_serial {
181 spinlock_t ds_serial_lock;
182 struct usb_serial_port *ds_oob_port; /* out-of-band port */
183 int ds_oob_port_num; /* index of out-of-band port */
184 int ds_device_started;
185};
186
187struct digi_port {
188 spinlock_t dp_port_lock;
189 int dp_port_num;
190 int dp_out_buf_len;
191 unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
192 int dp_write_urb_in_use;
193 unsigned int dp_modem_signals;
194 int dp_transmit_idle;
195 wait_queue_head_t dp_transmit_idle_wait;
196 int dp_throttled;
197 int dp_throttle_restart;
198 wait_queue_head_t dp_flush_wait;
199 wait_queue_head_t dp_close_wait; /* wait queue for close */
200 wait_queue_head_t write_wait;
201 struct usb_serial_port *dp_port;
202};
203
204
205/* Local Function Declarations */
206
207static int digi_write_oob_command(struct usb_serial_port *port,
208 unsigned char *buf, int count, int interruptible);
209static int digi_write_inb_command(struct usb_serial_port *port,
210 unsigned char *buf, int count, unsigned long timeout);
211static int digi_set_modem_signals(struct usb_serial_port *port,
212 unsigned int modem_signals, int interruptible);
213static int digi_transmit_idle(struct usb_serial_port *port,
214 unsigned long timeout);
215static void digi_rx_throttle(struct tty_struct *tty);
216static void digi_rx_unthrottle(struct tty_struct *tty);
217static void digi_set_termios(struct tty_struct *tty,
218 struct usb_serial_port *port,
219 const struct ktermios *old_termios);
220static void digi_break_ctl(struct tty_struct *tty, int break_state);
221static int digi_tiocmget(struct tty_struct *tty);
222static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
223 unsigned int clear);
224static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
225 const unsigned char *buf, int count);
226static void digi_write_bulk_callback(struct urb *urb);
227static unsigned int digi_write_room(struct tty_struct *tty);
228static unsigned int digi_chars_in_buffer(struct tty_struct *tty);
229static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
230static void digi_close(struct usb_serial_port *port);
231static void digi_dtr_rts(struct usb_serial_port *port, int on);
232static int digi_startup_device(struct usb_serial *serial);
233static int digi_startup(struct usb_serial *serial);
234static void digi_disconnect(struct usb_serial *serial);
235static void digi_release(struct usb_serial *serial);
236static int digi_port_probe(struct usb_serial_port *port);
237static void digi_port_remove(struct usb_serial_port *port);
238static void digi_read_bulk_callback(struct urb *urb);
239static int digi_read_inb_callback(struct urb *urb);
240static int digi_read_oob_callback(struct urb *urb);
241
242
243static const struct usb_device_id id_table_combined[] = {
244 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
245 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
246 { } /* Terminating entry */
247};
248
249static const struct usb_device_id id_table_2[] = {
250 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
251 { } /* Terminating entry */
252};
253
254static const struct usb_device_id id_table_4[] = {
255 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
256 { } /* Terminating entry */
257};
258
259MODULE_DEVICE_TABLE(usb, id_table_combined);
260
261/* device info needed for the Digi serial converter */
262
263static struct usb_serial_driver digi_acceleport_2_device = {
264 .driver = {
265 .owner = THIS_MODULE,
266 .name = "digi_2",
267 },
268 .description = "Digi 2 port USB adapter",
269 .id_table = id_table_2,
270 .num_ports = 3,
271 .num_bulk_in = 4,
272 .num_bulk_out = 4,
273 .open = digi_open,
274 .close = digi_close,
275 .dtr_rts = digi_dtr_rts,
276 .write = digi_write,
277 .write_room = digi_write_room,
278 .write_bulk_callback = digi_write_bulk_callback,
279 .read_bulk_callback = digi_read_bulk_callback,
280 .chars_in_buffer = digi_chars_in_buffer,
281 .throttle = digi_rx_throttle,
282 .unthrottle = digi_rx_unthrottle,
283 .set_termios = digi_set_termios,
284 .break_ctl = digi_break_ctl,
285 .tiocmget = digi_tiocmget,
286 .tiocmset = digi_tiocmset,
287 .attach = digi_startup,
288 .disconnect = digi_disconnect,
289 .release = digi_release,
290 .port_probe = digi_port_probe,
291 .port_remove = digi_port_remove,
292};
293
294static struct usb_serial_driver digi_acceleport_4_device = {
295 .driver = {
296 .owner = THIS_MODULE,
297 .name = "digi_4",
298 },
299 .description = "Digi 4 port USB adapter",
300 .id_table = id_table_4,
301 .num_ports = 4,
302 .num_bulk_in = 5,
303 .num_bulk_out = 5,
304 .open = digi_open,
305 .close = digi_close,
306 .write = digi_write,
307 .write_room = digi_write_room,
308 .write_bulk_callback = digi_write_bulk_callback,
309 .read_bulk_callback = digi_read_bulk_callback,
310 .chars_in_buffer = digi_chars_in_buffer,
311 .throttle = digi_rx_throttle,
312 .unthrottle = digi_rx_unthrottle,
313 .set_termios = digi_set_termios,
314 .break_ctl = digi_break_ctl,
315 .tiocmget = digi_tiocmget,
316 .tiocmset = digi_tiocmset,
317 .attach = digi_startup,
318 .disconnect = digi_disconnect,
319 .release = digi_release,
320 .port_probe = digi_port_probe,
321 .port_remove = digi_port_remove,
322};
323
324static struct usb_serial_driver * const serial_drivers[] = {
325 &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
326};
327
328/* Functions */
329
330/*
331 * Cond Wait Interruptible Timeout Irqrestore
332 *
333 * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
334 * so that wake ups are not lost if they occur between the unlock
335 * and the sleep. In other words, spin_unlock_irqrestore and
336 * interruptible_sleep_on_timeout are "atomic" with respect to
337 * wake ups. This is used to implement condition variables.
338 *
339 * interruptible_sleep_on_timeout is deprecated and has been replaced
340 * with the equivalent code.
341 */
342
343static long cond_wait_interruptible_timeout_irqrestore(
344 wait_queue_head_t *q, long timeout,
345 spinlock_t *lock, unsigned long flags)
346__releases(lock)
347{
348 DEFINE_WAIT(wait);
349
350 prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
351 spin_unlock_irqrestore(lock, flags);
352 timeout = schedule_timeout(timeout);
353 finish_wait(q, &wait);
354
355 return timeout;
356}
357
358/*
359 * Digi Write OOB Command
360 *
361 * Write commands on the out of band port. Commands are 4
362 * bytes each, multiple commands can be sent at once, and
363 * no command will be split across USB packets. Returns 0
364 * if successful, -EINTR if interrupted while sleeping and
365 * the interruptible flag is true, or a negative error
366 * returned by usb_submit_urb.
367 */
368
369static int digi_write_oob_command(struct usb_serial_port *port,
370 unsigned char *buf, int count, int interruptible)
371{
372 int ret = 0;
373 int len;
374 struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
375 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
376 unsigned long flags;
377
378 dev_dbg(&port->dev,
379 "digi_write_oob_command: TOP: port=%d, count=%d\n",
380 oob_priv->dp_port_num, count);
381
382 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
383 while (count > 0) {
384 while (oob_priv->dp_write_urb_in_use) {
385 cond_wait_interruptible_timeout_irqrestore(
386 &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
387 &oob_priv->dp_port_lock, flags);
388 if (interruptible && signal_pending(current))
389 return -EINTR;
390 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
391 }
392
393 /* len must be a multiple of 4, so commands are not split */
394 len = min(count, oob_port->bulk_out_size);
395 if (len > 4)
396 len &= ~3;
397 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
398 oob_port->write_urb->transfer_buffer_length = len;
399 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
400 if (ret == 0) {
401 oob_priv->dp_write_urb_in_use = 1;
402 count -= len;
403 buf += len;
404 }
405 }
406 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
407 if (ret)
408 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
409 __func__, ret);
410 return ret;
411
412}
413
414
415/*
416 * Digi Write In Band Command
417 *
418 * Write commands on the given port. Commands are 4
419 * bytes each, multiple commands can be sent at once, and
420 * no command will be split across USB packets. If timeout
421 * is non-zero, write in band command will return after
422 * waiting unsuccessfully for the URB status to clear for
423 * timeout ticks. Returns 0 if successful, or a negative
424 * error returned by digi_write.
425 */
426
427static int digi_write_inb_command(struct usb_serial_port *port,
428 unsigned char *buf, int count, unsigned long timeout)
429{
430 int ret = 0;
431 int len;
432 struct digi_port *priv = usb_get_serial_port_data(port);
433 unsigned char *data = port->write_urb->transfer_buffer;
434 unsigned long flags;
435
436 dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
437 priv->dp_port_num, count);
438
439 if (timeout)
440 timeout += jiffies;
441 else
442 timeout = ULONG_MAX;
443
444 spin_lock_irqsave(&priv->dp_port_lock, flags);
445 while (count > 0 && ret == 0) {
446 while (priv->dp_write_urb_in_use &&
447 time_before(jiffies, timeout)) {
448 cond_wait_interruptible_timeout_irqrestore(
449 &priv->write_wait, DIGI_RETRY_TIMEOUT,
450 &priv->dp_port_lock, flags);
451 if (signal_pending(current))
452 return -EINTR;
453 spin_lock_irqsave(&priv->dp_port_lock, flags);
454 }
455
456 /* len must be a multiple of 4 and small enough to */
457 /* guarantee the write will send buffered data first, */
458 /* so commands are in order with data and not split */
459 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
460 if (len > 4)
461 len &= ~3;
462
463 /* write any buffered data first */
464 if (priv->dp_out_buf_len > 0) {
465 data[0] = DIGI_CMD_SEND_DATA;
466 data[1] = priv->dp_out_buf_len;
467 memcpy(data + 2, priv->dp_out_buf,
468 priv->dp_out_buf_len);
469 memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
470 port->write_urb->transfer_buffer_length
471 = priv->dp_out_buf_len + 2 + len;
472 } else {
473 memcpy(data, buf, len);
474 port->write_urb->transfer_buffer_length = len;
475 }
476
477 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
478 if (ret == 0) {
479 priv->dp_write_urb_in_use = 1;
480 priv->dp_out_buf_len = 0;
481 count -= len;
482 buf += len;
483 }
484
485 }
486 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
487
488 if (ret)
489 dev_err(&port->dev,
490 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
491 __func__, ret, priv->dp_port_num);
492 return ret;
493}
494
495
496/*
497 * Digi Set Modem Signals
498 *
499 * Sets or clears DTR and RTS on the port, according to the
500 * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
501 * for the modem_signals argument. Returns 0 if successful,
502 * -EINTR if interrupted while sleeping, or a non-zero error
503 * returned by usb_submit_urb.
504 */
505
506static int digi_set_modem_signals(struct usb_serial_port *port,
507 unsigned int modem_signals, int interruptible)
508{
509
510 int ret;
511 struct digi_port *port_priv = usb_get_serial_port_data(port);
512 struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
513 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
514 unsigned char *data = oob_port->write_urb->transfer_buffer;
515 unsigned long flags;
516
517 dev_dbg(&port->dev,
518 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
519 port_priv->dp_port_num, modem_signals);
520
521 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
522 spin_lock(&port_priv->dp_port_lock);
523
524 while (oob_priv->dp_write_urb_in_use) {
525 spin_unlock(&port_priv->dp_port_lock);
526 cond_wait_interruptible_timeout_irqrestore(
527 &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
528 &oob_priv->dp_port_lock, flags);
529 if (interruptible && signal_pending(current))
530 return -EINTR;
531 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
532 spin_lock(&port_priv->dp_port_lock);
533 }
534 data[0] = DIGI_CMD_SET_DTR_SIGNAL;
535 data[1] = port_priv->dp_port_num;
536 data[2] = (modem_signals & TIOCM_DTR) ?
537 DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
538 data[3] = 0;
539 data[4] = DIGI_CMD_SET_RTS_SIGNAL;
540 data[5] = port_priv->dp_port_num;
541 data[6] = (modem_signals & TIOCM_RTS) ?
542 DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
543 data[7] = 0;
544
545 oob_port->write_urb->transfer_buffer_length = 8;
546
547 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
548 if (ret == 0) {
549 oob_priv->dp_write_urb_in_use = 1;
550 port_priv->dp_modem_signals &= ~(TIOCM_DTR | TIOCM_RTS);
551 port_priv->dp_modem_signals |=
552 modem_signals & (TIOCM_DTR | TIOCM_RTS);
553 }
554 spin_unlock(&port_priv->dp_port_lock);
555 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
556 if (ret)
557 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
558 __func__, ret);
559 return ret;
560}
561
562/*
563 * Digi Transmit Idle
564 *
565 * Digi transmit idle waits, up to timeout ticks, for the transmitter
566 * to go idle. It returns 0 if successful or a negative error.
567 *
568 * There are race conditions here if more than one process is calling
569 * digi_transmit_idle on the same port at the same time. However, this
570 * is only called from close, and only one process can be in close on a
571 * port at a time, so its ok.
572 */
573
574static int digi_transmit_idle(struct usb_serial_port *port,
575 unsigned long timeout)
576{
577 int ret;
578 unsigned char buf[2];
579 struct digi_port *priv = usb_get_serial_port_data(port);
580 unsigned long flags;
581
582 spin_lock_irqsave(&priv->dp_port_lock, flags);
583 priv->dp_transmit_idle = 0;
584 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
585
586 buf[0] = DIGI_CMD_TRANSMIT_IDLE;
587 buf[1] = 0;
588
589 timeout += jiffies;
590
591 ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
592 if (ret != 0)
593 return ret;
594
595 spin_lock_irqsave(&priv->dp_port_lock, flags);
596
597 while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
598 cond_wait_interruptible_timeout_irqrestore(
599 &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
600 &priv->dp_port_lock, flags);
601 if (signal_pending(current))
602 return -EINTR;
603 spin_lock_irqsave(&priv->dp_port_lock, flags);
604 }
605 priv->dp_transmit_idle = 0;
606 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
607 return 0;
608
609}
610
611
612static void digi_rx_throttle(struct tty_struct *tty)
613{
614 unsigned long flags;
615 struct usb_serial_port *port = tty->driver_data;
616 struct digi_port *priv = usb_get_serial_port_data(port);
617
618 /* stop receiving characters by not resubmitting the read urb */
619 spin_lock_irqsave(&priv->dp_port_lock, flags);
620 priv->dp_throttled = 1;
621 priv->dp_throttle_restart = 0;
622 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
623}
624
625
626static void digi_rx_unthrottle(struct tty_struct *tty)
627{
628 int ret = 0;
629 unsigned long flags;
630 struct usb_serial_port *port = tty->driver_data;
631 struct digi_port *priv = usb_get_serial_port_data(port);
632
633 spin_lock_irqsave(&priv->dp_port_lock, flags);
634
635 /* restart read chain */
636 if (priv->dp_throttle_restart)
637 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
638
639 /* turn throttle off */
640 priv->dp_throttled = 0;
641 priv->dp_throttle_restart = 0;
642
643 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
644
645 if (ret)
646 dev_err(&port->dev,
647 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
648 __func__, ret, priv->dp_port_num);
649}
650
651
652static void digi_set_termios(struct tty_struct *tty,
653 struct usb_serial_port *port,
654 const struct ktermios *old_termios)
655{
656 struct digi_port *priv = usb_get_serial_port_data(port);
657 struct device *dev = &port->dev;
658 unsigned int iflag = tty->termios.c_iflag;
659 unsigned int cflag = tty->termios.c_cflag;
660 unsigned int old_iflag = old_termios->c_iflag;
661 unsigned int old_cflag = old_termios->c_cflag;
662 unsigned char buf[32];
663 unsigned int modem_signals;
664 int arg, ret;
665 int i = 0;
666 speed_t baud;
667
668 dev_dbg(dev,
669 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
670 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
671
672 /* set baud rate */
673 baud = tty_get_baud_rate(tty);
674 if (baud != tty_termios_baud_rate(old_termios)) {
675 arg = -1;
676
677 /* reassert DTR and (maybe) RTS on transition from B0 */
678 if ((old_cflag & CBAUD) == B0) {
679 /* don't set RTS if using hardware flow control */
680 /* and throttling input */
681 modem_signals = TIOCM_DTR;
682 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
683 modem_signals |= TIOCM_RTS;
684 digi_set_modem_signals(port, modem_signals, 1);
685 }
686 switch (baud) {
687 /* drop DTR and RTS on transition to B0 */
688 case 0: digi_set_modem_signals(port, 0, 1); break;
689 case 50: arg = DIGI_BAUD_50; break;
690 case 75: arg = DIGI_BAUD_75; break;
691 case 110: arg = DIGI_BAUD_110; break;
692 case 150: arg = DIGI_BAUD_150; break;
693 case 200: arg = DIGI_BAUD_200; break;
694 case 300: arg = DIGI_BAUD_300; break;
695 case 600: arg = DIGI_BAUD_600; break;
696 case 1200: arg = DIGI_BAUD_1200; break;
697 case 1800: arg = DIGI_BAUD_1800; break;
698 case 2400: arg = DIGI_BAUD_2400; break;
699 case 4800: arg = DIGI_BAUD_4800; break;
700 case 9600: arg = DIGI_BAUD_9600; break;
701 case 19200: arg = DIGI_BAUD_19200; break;
702 case 38400: arg = DIGI_BAUD_38400; break;
703 case 57600: arg = DIGI_BAUD_57600; break;
704 case 115200: arg = DIGI_BAUD_115200; break;
705 case 230400: arg = DIGI_BAUD_230400; break;
706 case 460800: arg = DIGI_BAUD_460800; break;
707 default:
708 arg = DIGI_BAUD_9600;
709 baud = 9600;
710 break;
711 }
712 if (arg != -1) {
713 buf[i++] = DIGI_CMD_SET_BAUD_RATE;
714 buf[i++] = priv->dp_port_num;
715 buf[i++] = arg;
716 buf[i++] = 0;
717 }
718 }
719 /* set parity */
720 tty->termios.c_cflag &= ~CMSPAR;
721
722 if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) {
723 if (cflag & PARENB) {
724 if (cflag & PARODD)
725 arg = DIGI_PARITY_ODD;
726 else
727 arg = DIGI_PARITY_EVEN;
728 } else {
729 arg = DIGI_PARITY_NONE;
730 }
731 buf[i++] = DIGI_CMD_SET_PARITY;
732 buf[i++] = priv->dp_port_num;
733 buf[i++] = arg;
734 buf[i++] = 0;
735 }
736 /* set word size */
737 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
738 arg = -1;
739 switch (cflag & CSIZE) {
740 case CS5: arg = DIGI_WORD_SIZE_5; break;
741 case CS6: arg = DIGI_WORD_SIZE_6; break;
742 case CS7: arg = DIGI_WORD_SIZE_7; break;
743 case CS8: arg = DIGI_WORD_SIZE_8; break;
744 default:
745 dev_dbg(dev,
746 "digi_set_termios: can't handle word size %d\n",
747 cflag & CSIZE);
748 break;
749 }
750
751 if (arg != -1) {
752 buf[i++] = DIGI_CMD_SET_WORD_SIZE;
753 buf[i++] = priv->dp_port_num;
754 buf[i++] = arg;
755 buf[i++] = 0;
756 }
757
758 }
759
760 /* set stop bits */
761 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
762
763 if ((cflag & CSTOPB))
764 arg = DIGI_STOP_BITS_2;
765 else
766 arg = DIGI_STOP_BITS_1;
767
768 buf[i++] = DIGI_CMD_SET_STOP_BITS;
769 buf[i++] = priv->dp_port_num;
770 buf[i++] = arg;
771 buf[i++] = 0;
772
773 }
774
775 /* set input flow control */
776 if ((iflag & IXOFF) != (old_iflag & IXOFF) ||
777 (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
778 arg = 0;
779 if (iflag & IXOFF)
780 arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
781 else
782 arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
783
784 if (cflag & CRTSCTS) {
785 arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
786
787 /* On USB-4 it is necessary to assert RTS prior */
788 /* to selecting RTS input flow control. */
789 buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
790 buf[i++] = priv->dp_port_num;
791 buf[i++] = DIGI_RTS_ACTIVE;
792 buf[i++] = 0;
793
794 } else {
795 arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
796 }
797 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
798 buf[i++] = priv->dp_port_num;
799 buf[i++] = arg;
800 buf[i++] = 0;
801 }
802
803 /* set output flow control */
804 if ((iflag & IXON) != (old_iflag & IXON) ||
805 (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
806 arg = 0;
807 if (iflag & IXON)
808 arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
809 else
810 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
811
812 if (cflag & CRTSCTS)
813 arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
814 else
815 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
816
817 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
818 buf[i++] = priv->dp_port_num;
819 buf[i++] = arg;
820 buf[i++] = 0;
821 }
822
823 /* set receive enable/disable */
824 if ((cflag & CREAD) != (old_cflag & CREAD)) {
825 if (cflag & CREAD)
826 arg = DIGI_ENABLE;
827 else
828 arg = DIGI_DISABLE;
829
830 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
831 buf[i++] = priv->dp_port_num;
832 buf[i++] = arg;
833 buf[i++] = 0;
834 }
835 ret = digi_write_oob_command(port, buf, i, 1);
836 if (ret != 0)
837 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
838 tty_encode_baud_rate(tty, baud, baud);
839}
840
841
842static void digi_break_ctl(struct tty_struct *tty, int break_state)
843{
844 struct usb_serial_port *port = tty->driver_data;
845 unsigned char buf[4];
846
847 buf[0] = DIGI_CMD_BREAK_CONTROL;
848 buf[1] = 2; /* length */
849 buf[2] = break_state ? 1 : 0;
850 buf[3] = 0; /* pad */
851 digi_write_inb_command(port, buf, 4, 0);
852}
853
854
855static int digi_tiocmget(struct tty_struct *tty)
856{
857 struct usb_serial_port *port = tty->driver_data;
858 struct digi_port *priv = usb_get_serial_port_data(port);
859 unsigned int val;
860 unsigned long flags;
861
862 spin_lock_irqsave(&priv->dp_port_lock, flags);
863 val = priv->dp_modem_signals;
864 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
865 return val;
866}
867
868
869static int digi_tiocmset(struct tty_struct *tty,
870 unsigned int set, unsigned int clear)
871{
872 struct usb_serial_port *port = tty->driver_data;
873 struct digi_port *priv = usb_get_serial_port_data(port);
874 unsigned int val;
875 unsigned long flags;
876
877 spin_lock_irqsave(&priv->dp_port_lock, flags);
878 val = (priv->dp_modem_signals & ~clear) | set;
879 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
880 return digi_set_modem_signals(port, val, 1);
881}
882
883
884static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
885 const unsigned char *buf, int count)
886{
887
888 int ret, data_len, new_len;
889 struct digi_port *priv = usb_get_serial_port_data(port);
890 unsigned char *data = port->write_urb->transfer_buffer;
891 unsigned long flags;
892
893 dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n",
894 priv->dp_port_num, count);
895
896 /* copy user data (which can sleep) before getting spin lock */
897 count = min(count, port->bulk_out_size-2);
898 count = min(64, count);
899
900 /* be sure only one write proceeds at a time */
901 /* there are races on the port private buffer */
902 spin_lock_irqsave(&priv->dp_port_lock, flags);
903
904 /* wait for urb status clear to submit another urb */
905 if (priv->dp_write_urb_in_use) {
906 /* buffer data if count is 1 (probably put_char) if possible */
907 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
908 priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
909 new_len = 1;
910 } else {
911 new_len = 0;
912 }
913 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
914 return new_len;
915 }
916
917 /* allow space for any buffered data and for new data, up to */
918 /* transfer buffer size - 2 (for command and length bytes) */
919 new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
920 data_len = new_len + priv->dp_out_buf_len;
921
922 if (data_len == 0) {
923 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
924 return 0;
925 }
926
927 port->write_urb->transfer_buffer_length = data_len+2;
928
929 *data++ = DIGI_CMD_SEND_DATA;
930 *data++ = data_len;
931
932 /* copy in buffered data first */
933 memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
934 data += priv->dp_out_buf_len;
935
936 /* copy in new data */
937 memcpy(data, buf, new_len);
938
939 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
940 if (ret == 0) {
941 priv->dp_write_urb_in_use = 1;
942 ret = new_len;
943 priv->dp_out_buf_len = 0;
944 }
945
946 /* return length of new data written, or error */
947 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
948 if (ret < 0)
949 dev_err_console(port,
950 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
951 __func__, ret, priv->dp_port_num);
952 dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
953 return ret;
954
955}
956
957static void digi_write_bulk_callback(struct urb *urb)
958{
959
960 struct usb_serial_port *port = urb->context;
961 struct usb_serial *serial;
962 struct digi_port *priv;
963 struct digi_serial *serial_priv;
964 unsigned long flags;
965 int ret = 0;
966 int status = urb->status;
967 bool wakeup;
968
969 /* port and serial sanity check */
970 if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
971 pr_err("%s: port or port->private is NULL, status=%d\n",
972 __func__, status);
973 return;
974 }
975 serial = port->serial;
976 if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
977 dev_err(&port->dev,
978 "%s: serial or serial->private is NULL, status=%d\n",
979 __func__, status);
980 return;
981 }
982
983 /* handle oob callback */
984 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
985 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
986 spin_lock_irqsave(&priv->dp_port_lock, flags);
987 priv->dp_write_urb_in_use = 0;
988 wake_up_interruptible(&priv->write_wait);
989 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
990 return;
991 }
992
993 /* try to send any buffered data on this port */
994 wakeup = true;
995 spin_lock_irqsave(&priv->dp_port_lock, flags);
996 priv->dp_write_urb_in_use = 0;
997 if (priv->dp_out_buf_len > 0) {
998 *((unsigned char *)(port->write_urb->transfer_buffer))
999 = (unsigned char)DIGI_CMD_SEND_DATA;
1000 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1001 = (unsigned char)priv->dp_out_buf_len;
1002 port->write_urb->transfer_buffer_length =
1003 priv->dp_out_buf_len + 2;
1004 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1005 priv->dp_out_buf_len);
1006 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1007 if (ret == 0) {
1008 priv->dp_write_urb_in_use = 1;
1009 priv->dp_out_buf_len = 0;
1010 wakeup = false;
1011 }
1012 }
1013 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1014
1015 if (ret && ret != -EPERM)
1016 dev_err_console(port,
1017 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1018 __func__, ret, priv->dp_port_num);
1019
1020 if (wakeup)
1021 tty_port_tty_wakeup(&port->port);
1022}
1023
1024static unsigned int digi_write_room(struct tty_struct *tty)
1025{
1026 struct usb_serial_port *port = tty->driver_data;
1027 struct digi_port *priv = usb_get_serial_port_data(port);
1028 unsigned long flags;
1029 unsigned int room;
1030
1031 spin_lock_irqsave(&priv->dp_port_lock, flags);
1032
1033 if (priv->dp_write_urb_in_use)
1034 room = 0;
1035 else
1036 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1037
1038 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1039 dev_dbg(&port->dev, "digi_write_room: port=%d, room=%u\n", priv->dp_port_num, room);
1040 return room;
1041
1042}
1043
1044static unsigned int digi_chars_in_buffer(struct tty_struct *tty)
1045{
1046 struct usb_serial_port *port = tty->driver_data;
1047 struct digi_port *priv = usb_get_serial_port_data(port);
1048 unsigned long flags;
1049 unsigned int chars;
1050
1051 spin_lock_irqsave(&priv->dp_port_lock, flags);
1052 if (priv->dp_write_urb_in_use)
1053 chars = port->bulk_out_size - 2;
1054 else
1055 chars = priv->dp_out_buf_len;
1056 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1057
1058 dev_dbg(&port->dev, "%s: port=%d, chars=%d\n", __func__,
1059 priv->dp_port_num, chars);
1060 return chars;
1061}
1062
1063static void digi_dtr_rts(struct usb_serial_port *port, int on)
1064{
1065 /* Adjust DTR and RTS */
1066 digi_set_modem_signals(port, on * (TIOCM_DTR | TIOCM_RTS), 1);
1067}
1068
1069static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1070{
1071 int ret;
1072 unsigned char buf[32];
1073 struct digi_port *priv = usb_get_serial_port_data(port);
1074 struct ktermios not_termios;
1075
1076 /* be sure the device is started up */
1077 if (digi_startup_device(port->serial) != 0)
1078 return -ENXIO;
1079
1080 /* read modem signals automatically whenever they change */
1081 buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1082 buf[1] = priv->dp_port_num;
1083 buf[2] = DIGI_ENABLE;
1084 buf[3] = 0;
1085
1086 /* flush fifos */
1087 buf[4] = DIGI_CMD_IFLUSH_FIFO;
1088 buf[5] = priv->dp_port_num;
1089 buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1090 buf[7] = 0;
1091
1092 ret = digi_write_oob_command(port, buf, 8, 1);
1093 if (ret != 0)
1094 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1095
1096 /* set termios settings */
1097 if (tty) {
1098 not_termios.c_cflag = ~tty->termios.c_cflag;
1099 not_termios.c_iflag = ~tty->termios.c_iflag;
1100 digi_set_termios(tty, port, ¬_termios);
1101 }
1102 return 0;
1103}
1104
1105
1106static void digi_close(struct usb_serial_port *port)
1107{
1108 DEFINE_WAIT(wait);
1109 int ret;
1110 unsigned char buf[32];
1111 struct digi_port *priv = usb_get_serial_port_data(port);
1112
1113 mutex_lock(&port->serial->disc_mutex);
1114 /* if disconnected, just clear flags */
1115 if (port->serial->disconnected)
1116 goto exit;
1117
1118 /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1119 digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1120
1121 /* disable input flow control */
1122 buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1123 buf[1] = priv->dp_port_num;
1124 buf[2] = DIGI_DISABLE;
1125 buf[3] = 0;
1126
1127 /* disable output flow control */
1128 buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1129 buf[5] = priv->dp_port_num;
1130 buf[6] = DIGI_DISABLE;
1131 buf[7] = 0;
1132
1133 /* disable reading modem signals automatically */
1134 buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1135 buf[9] = priv->dp_port_num;
1136 buf[10] = DIGI_DISABLE;
1137 buf[11] = 0;
1138
1139 /* disable receive */
1140 buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1141 buf[13] = priv->dp_port_num;
1142 buf[14] = DIGI_DISABLE;
1143 buf[15] = 0;
1144
1145 /* flush fifos */
1146 buf[16] = DIGI_CMD_IFLUSH_FIFO;
1147 buf[17] = priv->dp_port_num;
1148 buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1149 buf[19] = 0;
1150
1151 ret = digi_write_oob_command(port, buf, 20, 0);
1152 if (ret != 0)
1153 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1154 ret);
1155 /* wait for final commands on oob port to complete */
1156 prepare_to_wait(&priv->dp_flush_wait, &wait,
1157 TASK_INTERRUPTIBLE);
1158 schedule_timeout(DIGI_CLOSE_TIMEOUT);
1159 finish_wait(&priv->dp_flush_wait, &wait);
1160
1161 /* shutdown any outstanding bulk writes */
1162 usb_kill_urb(port->write_urb);
1163exit:
1164 spin_lock_irq(&priv->dp_port_lock);
1165 priv->dp_write_urb_in_use = 0;
1166 wake_up_interruptible(&priv->dp_close_wait);
1167 spin_unlock_irq(&priv->dp_port_lock);
1168 mutex_unlock(&port->serial->disc_mutex);
1169}
1170
1171
1172/*
1173 * Digi Startup Device
1174 *
1175 * Starts reads on all ports. Must be called AFTER startup, with
1176 * urbs initialized. Returns 0 if successful, non-zero error otherwise.
1177 */
1178
1179static int digi_startup_device(struct usb_serial *serial)
1180{
1181 int i, ret = 0;
1182 struct digi_serial *serial_priv = usb_get_serial_data(serial);
1183 struct usb_serial_port *port;
1184
1185 /* be sure this happens exactly once */
1186 spin_lock(&serial_priv->ds_serial_lock);
1187 if (serial_priv->ds_device_started) {
1188 spin_unlock(&serial_priv->ds_serial_lock);
1189 return 0;
1190 }
1191 serial_priv->ds_device_started = 1;
1192 spin_unlock(&serial_priv->ds_serial_lock);
1193
1194 /* start reading from each bulk in endpoint for the device */
1195 /* set USB_DISABLE_SPD flag for write bulk urbs */
1196 for (i = 0; i < serial->type->num_ports + 1; i++) {
1197 port = serial->port[i];
1198 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1199 if (ret != 0) {
1200 dev_err(&port->dev,
1201 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1202 __func__, ret, i);
1203 break;
1204 }
1205 }
1206 return ret;
1207}
1208
1209static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1210{
1211 struct digi_port *priv;
1212
1213 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1214 if (!priv)
1215 return -ENOMEM;
1216
1217 spin_lock_init(&priv->dp_port_lock);
1218 priv->dp_port_num = port_num;
1219 init_waitqueue_head(&priv->dp_transmit_idle_wait);
1220 init_waitqueue_head(&priv->dp_flush_wait);
1221 init_waitqueue_head(&priv->dp_close_wait);
1222 init_waitqueue_head(&priv->write_wait);
1223 priv->dp_port = port;
1224
1225 usb_set_serial_port_data(port, priv);
1226
1227 return 0;
1228}
1229
1230static int digi_startup(struct usb_serial *serial)
1231{
1232 struct digi_serial *serial_priv;
1233 int ret;
1234
1235 serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1236 if (!serial_priv)
1237 return -ENOMEM;
1238
1239 spin_lock_init(&serial_priv->ds_serial_lock);
1240 serial_priv->ds_oob_port_num = serial->type->num_ports;
1241 serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1242
1243 ret = digi_port_init(serial_priv->ds_oob_port,
1244 serial_priv->ds_oob_port_num);
1245 if (ret) {
1246 kfree(serial_priv);
1247 return ret;
1248 }
1249
1250 usb_set_serial_data(serial, serial_priv);
1251
1252 return 0;
1253}
1254
1255
1256static void digi_disconnect(struct usb_serial *serial)
1257{
1258 int i;
1259
1260 /* stop reads and writes on all ports */
1261 for (i = 0; i < serial->type->num_ports + 1; i++) {
1262 usb_kill_urb(serial->port[i]->read_urb);
1263 usb_kill_urb(serial->port[i]->write_urb);
1264 }
1265}
1266
1267
1268static void digi_release(struct usb_serial *serial)
1269{
1270 struct digi_serial *serial_priv;
1271 struct digi_port *priv;
1272
1273 serial_priv = usb_get_serial_data(serial);
1274
1275 priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1276 kfree(priv);
1277
1278 kfree(serial_priv);
1279}
1280
1281static int digi_port_probe(struct usb_serial_port *port)
1282{
1283 return digi_port_init(port, port->port_number);
1284}
1285
1286static void digi_port_remove(struct usb_serial_port *port)
1287{
1288 struct digi_port *priv;
1289
1290 priv = usb_get_serial_port_data(port);
1291 kfree(priv);
1292}
1293
1294static void digi_read_bulk_callback(struct urb *urb)
1295{
1296 struct usb_serial_port *port = urb->context;
1297 struct digi_port *priv;
1298 struct digi_serial *serial_priv;
1299 int ret;
1300 int status = urb->status;
1301
1302 /* port sanity check, do not resubmit if port is not valid */
1303 if (port == NULL)
1304 return;
1305 priv = usb_get_serial_port_data(port);
1306 if (priv == NULL) {
1307 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1308 __func__, status);
1309 return;
1310 }
1311 if (port->serial == NULL ||
1312 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1313 dev_err(&port->dev, "%s: serial is bad or serial->private "
1314 "is NULL, status=%d\n", __func__, status);
1315 return;
1316 }
1317
1318 /* do not resubmit urb if it has any status error */
1319 if (status) {
1320 dev_err(&port->dev,
1321 "%s: nonzero read bulk status: status=%d, port=%d\n",
1322 __func__, status, priv->dp_port_num);
1323 return;
1324 }
1325
1326 /* handle oob or inb callback, do not resubmit if error */
1327 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1328 if (digi_read_oob_callback(urb) != 0)
1329 return;
1330 } else {
1331 if (digi_read_inb_callback(urb) != 0)
1332 return;
1333 }
1334
1335 /* continue read */
1336 ret = usb_submit_urb(urb, GFP_ATOMIC);
1337 if (ret != 0 && ret != -EPERM) {
1338 dev_err(&port->dev,
1339 "%s: failed resubmitting urb, ret=%d, port=%d\n",
1340 __func__, ret, priv->dp_port_num);
1341 }
1342
1343}
1344
1345/*
1346 * Digi Read INB Callback
1347 *
1348 * Digi Read INB Callback handles reads on the in band ports, sending
1349 * the data on to the tty subsystem. When called we know port and
1350 * port->private are not NULL and port->serial has been validated.
1351 * It returns 0 if successful, 1 if successful but the port is
1352 * throttled, and -1 if the sanity checks failed.
1353 */
1354
1355static int digi_read_inb_callback(struct urb *urb)
1356{
1357 struct usb_serial_port *port = urb->context;
1358 struct digi_port *priv = usb_get_serial_port_data(port);
1359 unsigned char *buf = urb->transfer_buffer;
1360 unsigned long flags;
1361 int opcode;
1362 int len;
1363 int port_status;
1364 unsigned char *data;
1365 int tty_flag, throttled;
1366
1367 /* short/multiple packet check */
1368 if (urb->actual_length < 2) {
1369 dev_warn(&port->dev, "short packet received\n");
1370 return -1;
1371 }
1372
1373 opcode = buf[0];
1374 len = buf[1];
1375
1376 if (urb->actual_length != len + 2) {
1377 dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
1378 priv->dp_port_num, opcode, len, urb->actual_length);
1379 return -1;
1380 }
1381
1382 if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
1383 dev_err(&port->dev, "malformed data packet received\n");
1384 return -1;
1385 }
1386
1387 spin_lock_irqsave(&priv->dp_port_lock, flags);
1388
1389 /* check for throttle; if set, do not resubmit read urb */
1390 /* indicate the read chain needs to be restarted on unthrottle */
1391 throttled = priv->dp_throttled;
1392 if (throttled)
1393 priv->dp_throttle_restart = 1;
1394
1395 /* receive data */
1396 if (opcode == DIGI_CMD_RECEIVE_DATA) {
1397 port_status = buf[2];
1398 data = &buf[3];
1399
1400 /* get flag from port_status */
1401 tty_flag = 0;
1402
1403 /* overrun is special, not associated with a char */
1404 if (port_status & DIGI_OVERRUN_ERROR)
1405 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1406
1407 /* break takes precedence over parity, */
1408 /* which takes precedence over framing errors */
1409 if (port_status & DIGI_BREAK_ERROR)
1410 tty_flag = TTY_BREAK;
1411 else if (port_status & DIGI_PARITY_ERROR)
1412 tty_flag = TTY_PARITY;
1413 else if (port_status & DIGI_FRAMING_ERROR)
1414 tty_flag = TTY_FRAME;
1415
1416 /* data length is len-1 (one byte of len is port_status) */
1417 --len;
1418 if (len > 0) {
1419 tty_insert_flip_string_fixed_flag(&port->port, data,
1420 tty_flag, len);
1421 tty_flip_buffer_push(&port->port);
1422 }
1423 }
1424 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1425
1426 if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1427 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1428 else if (opcode != DIGI_CMD_RECEIVE_DATA)
1429 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1430
1431 return throttled ? 1 : 0;
1432
1433}
1434
1435
1436/*
1437 * Digi Read OOB Callback
1438 *
1439 * Digi Read OOB Callback handles reads on the out of band port.
1440 * When called we know port and port->private are not NULL and
1441 * the port->serial is valid. It returns 0 if successful, and
1442 * -1 if the sanity checks failed.
1443 */
1444
1445static int digi_read_oob_callback(struct urb *urb)
1446{
1447
1448 struct usb_serial_port *port = urb->context;
1449 struct usb_serial *serial = port->serial;
1450 struct tty_struct *tty;
1451 struct digi_port *priv;
1452 unsigned char *buf = urb->transfer_buffer;
1453 int opcode, line, status, val;
1454 unsigned long flags;
1455 int i;
1456 unsigned int rts;
1457
1458 if (urb->actual_length < 4)
1459 return -1;
1460
1461 /* handle each oob command */
1462 for (i = 0; i < urb->actual_length - 3; i += 4) {
1463 opcode = buf[i];
1464 line = buf[i + 1];
1465 status = buf[i + 2];
1466 val = buf[i + 3];
1467
1468 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1469 opcode, line, status, val);
1470
1471 if (status != 0 || line >= serial->type->num_ports)
1472 continue;
1473
1474 port = serial->port[line];
1475
1476 priv = usb_get_serial_port_data(port);
1477 if (priv == NULL)
1478 return -1;
1479
1480 tty = tty_port_tty_get(&port->port);
1481
1482 rts = 0;
1483 if (tty)
1484 rts = C_CRTSCTS(tty);
1485
1486 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1487 bool wakeup = false;
1488
1489 spin_lock_irqsave(&priv->dp_port_lock, flags);
1490 /* convert from digi flags to termiox flags */
1491 if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1492 priv->dp_modem_signals |= TIOCM_CTS;
1493 if (rts)
1494 wakeup = true;
1495 } else {
1496 priv->dp_modem_signals &= ~TIOCM_CTS;
1497 /* port must be open to use tty struct */
1498 }
1499 if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1500 priv->dp_modem_signals |= TIOCM_DSR;
1501 else
1502 priv->dp_modem_signals &= ~TIOCM_DSR;
1503 if (val & DIGI_READ_INPUT_SIGNALS_RI)
1504 priv->dp_modem_signals |= TIOCM_RI;
1505 else
1506 priv->dp_modem_signals &= ~TIOCM_RI;
1507 if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1508 priv->dp_modem_signals |= TIOCM_CD;
1509 else
1510 priv->dp_modem_signals &= ~TIOCM_CD;
1511
1512 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1513
1514 if (wakeup)
1515 tty_port_tty_wakeup(&port->port);
1516 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1517 spin_lock_irqsave(&priv->dp_port_lock, flags);
1518 priv->dp_transmit_idle = 1;
1519 wake_up_interruptible(&priv->dp_transmit_idle_wait);
1520 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1521 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1522 wake_up_interruptible(&priv->dp_flush_wait);
1523 }
1524 tty_kref_put(tty);
1525 }
1526 return 0;
1527
1528}
1529
1530module_usb_serial_driver(serial_drivers, id_table_combined);
1531
1532MODULE_AUTHOR(DRIVER_AUTHOR);
1533MODULE_DESCRIPTION(DRIVER_DESC);
1534MODULE_LICENSE("GPL");