Loading...
1/*
2 * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <linux/io.h>
13#include <linux/rtc.h>
14#include <linux/module.h>
15#include <linux/slab.h>
16#include <linux/interrupt.h>
17#include <linux/platform_device.h>
18#include <linux/clk.h>
19#include <linux/of.h>
20#include <linux/of_device.h>
21
22#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
23#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
24#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
25
26#define RTC_SW_BIT (1 << 0)
27#define RTC_ALM_BIT (1 << 2)
28#define RTC_1HZ_BIT (1 << 4)
29#define RTC_2HZ_BIT (1 << 7)
30#define RTC_SAM0_BIT (1 << 8)
31#define RTC_SAM1_BIT (1 << 9)
32#define RTC_SAM2_BIT (1 << 10)
33#define RTC_SAM3_BIT (1 << 11)
34#define RTC_SAM4_BIT (1 << 12)
35#define RTC_SAM5_BIT (1 << 13)
36#define RTC_SAM6_BIT (1 << 14)
37#define RTC_SAM7_BIT (1 << 15)
38#define PIT_ALL_ON (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
39 RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
40 RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
41
42#define RTC_ENABLE_BIT (1 << 7)
43
44#define MAX_PIE_NUM 9
45#define MAX_PIE_FREQ 512
46static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
47 { 2, RTC_2HZ_BIT },
48 { 4, RTC_SAM0_BIT },
49 { 8, RTC_SAM1_BIT },
50 { 16, RTC_SAM2_BIT },
51 { 32, RTC_SAM3_BIT },
52 { 64, RTC_SAM4_BIT },
53 { 128, RTC_SAM5_BIT },
54 { 256, RTC_SAM6_BIT },
55 { MAX_PIE_FREQ, RTC_SAM7_BIT },
56};
57
58#define MXC_RTC_TIME 0
59#define MXC_RTC_ALARM 1
60
61#define RTC_HOURMIN 0x00 /* 32bit rtc hour/min counter reg */
62#define RTC_SECOND 0x04 /* 32bit rtc seconds counter reg */
63#define RTC_ALRM_HM 0x08 /* 32bit rtc alarm hour/min reg */
64#define RTC_ALRM_SEC 0x0C /* 32bit rtc alarm seconds reg */
65#define RTC_RTCCTL 0x10 /* 32bit rtc control reg */
66#define RTC_RTCISR 0x14 /* 32bit rtc interrupt status reg */
67#define RTC_RTCIENR 0x18 /* 32bit rtc interrupt enable reg */
68#define RTC_STPWCH 0x1C /* 32bit rtc stopwatch min reg */
69#define RTC_DAYR 0x20 /* 32bit rtc days counter reg */
70#define RTC_DAYALARM 0x24 /* 32bit rtc day alarm reg */
71#define RTC_TEST1 0x28 /* 32bit rtc test reg 1 */
72#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
73#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
74
75enum imx_rtc_type {
76 IMX1_RTC,
77 IMX21_RTC,
78};
79
80struct rtc_plat_data {
81 struct rtc_device *rtc;
82 void __iomem *ioaddr;
83 int irq;
84 struct clk *clk_ref;
85 struct clk *clk_ipg;
86 struct rtc_time g_rtc_alarm;
87 enum imx_rtc_type devtype;
88};
89
90static const struct platform_device_id imx_rtc_devtype[] = {
91 {
92 .name = "imx1-rtc",
93 .driver_data = IMX1_RTC,
94 }, {
95 .name = "imx21-rtc",
96 .driver_data = IMX21_RTC,
97 }, {
98 /* sentinel */
99 }
100};
101MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
102
103#ifdef CONFIG_OF
104static const struct of_device_id imx_rtc_dt_ids[] = {
105 { .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
106 { .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
107 {}
108};
109MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
110#endif
111
112static inline int is_imx1_rtc(struct rtc_plat_data *data)
113{
114 return data->devtype == IMX1_RTC;
115}
116
117/*
118 * This function is used to obtain the RTC time or the alarm value in
119 * second.
120 */
121static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
122{
123 struct platform_device *pdev = to_platform_device(dev);
124 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
125 void __iomem *ioaddr = pdata->ioaddr;
126 u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
127
128 switch (time_alarm) {
129 case MXC_RTC_TIME:
130 day = readw(ioaddr + RTC_DAYR);
131 hr_min = readw(ioaddr + RTC_HOURMIN);
132 sec = readw(ioaddr + RTC_SECOND);
133 break;
134 case MXC_RTC_ALARM:
135 day = readw(ioaddr + RTC_DAYALARM);
136 hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
137 sec = readw(ioaddr + RTC_ALRM_SEC);
138 break;
139 }
140
141 hr = hr_min >> 8;
142 min = hr_min & 0xff;
143
144 return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
145}
146
147/*
148 * This function sets the RTC alarm value or the time value.
149 */
150static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
151{
152 u32 tod, day, hr, min, sec, temp;
153 struct platform_device *pdev = to_platform_device(dev);
154 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
155 void __iomem *ioaddr = pdata->ioaddr;
156
157 day = div_s64_rem(time, 86400, &tod);
158
159 /* time is within a day now */
160 hr = tod / 3600;
161 tod -= hr * 3600;
162
163 /* time is within an hour now */
164 min = tod / 60;
165 sec = tod - min * 60;
166
167 temp = (hr << 8) + min;
168
169 switch (time_alarm) {
170 case MXC_RTC_TIME:
171 writew(day, ioaddr + RTC_DAYR);
172 writew(sec, ioaddr + RTC_SECOND);
173 writew(temp, ioaddr + RTC_HOURMIN);
174 break;
175 case MXC_RTC_ALARM:
176 writew(day, ioaddr + RTC_DAYALARM);
177 writew(sec, ioaddr + RTC_ALRM_SEC);
178 writew(temp, ioaddr + RTC_ALRM_HM);
179 break;
180 }
181}
182
183/*
184 * This function updates the RTC alarm registers and then clears all the
185 * interrupt status bits.
186 */
187static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
188{
189 time64_t time;
190 struct platform_device *pdev = to_platform_device(dev);
191 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
192 void __iomem *ioaddr = pdata->ioaddr;
193
194 time = rtc_tm_to_time64(alrm);
195
196 /* clear all the interrupt status bits */
197 writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
198 set_alarm_or_time(dev, MXC_RTC_ALARM, time);
199}
200
201static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
202 unsigned int enabled)
203{
204 struct platform_device *pdev = to_platform_device(dev);
205 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
206 void __iomem *ioaddr = pdata->ioaddr;
207 u32 reg;
208
209 spin_lock_irq(&pdata->rtc->irq_lock);
210 reg = readw(ioaddr + RTC_RTCIENR);
211
212 if (enabled)
213 reg |= bit;
214 else
215 reg &= ~bit;
216
217 writew(reg, ioaddr + RTC_RTCIENR);
218 spin_unlock_irq(&pdata->rtc->irq_lock);
219}
220
221/* This function is the RTC interrupt service routine. */
222static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
223{
224 struct platform_device *pdev = dev_id;
225 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
226 void __iomem *ioaddr = pdata->ioaddr;
227 unsigned long flags;
228 u32 status;
229 u32 events = 0;
230
231 spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
232 status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
233 /* clear interrupt sources */
234 writew(status, ioaddr + RTC_RTCISR);
235
236 /* update irq data & counter */
237 if (status & RTC_ALM_BIT) {
238 events |= (RTC_AF | RTC_IRQF);
239 /* RTC alarm should be one-shot */
240 mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
241 }
242
243 if (status & RTC_1HZ_BIT)
244 events |= (RTC_UF | RTC_IRQF);
245
246 if (status & PIT_ALL_ON)
247 events |= (RTC_PF | RTC_IRQF);
248
249 rtc_update_irq(pdata->rtc, 1, events);
250 spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
251
252 return IRQ_HANDLED;
253}
254
255/*
256 * Clear all interrupts and release the IRQ
257 */
258static void mxc_rtc_release(struct device *dev)
259{
260 struct platform_device *pdev = to_platform_device(dev);
261 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
262 void __iomem *ioaddr = pdata->ioaddr;
263
264 spin_lock_irq(&pdata->rtc->irq_lock);
265
266 /* Disable all rtc interrupts */
267 writew(0, ioaddr + RTC_RTCIENR);
268
269 /* Clear all interrupt status */
270 writew(0xffffffff, ioaddr + RTC_RTCISR);
271
272 spin_unlock_irq(&pdata->rtc->irq_lock);
273}
274
275static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
276{
277 mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
278 return 0;
279}
280
281/*
282 * This function reads the current RTC time into tm in Gregorian date.
283 */
284static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
285{
286 time64_t val;
287
288 /* Avoid roll-over from reading the different registers */
289 do {
290 val = get_alarm_or_time(dev, MXC_RTC_TIME);
291 } while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
292
293 rtc_time64_to_tm(val, tm);
294
295 return 0;
296}
297
298/*
299 * This function sets the internal RTC time based on tm in Gregorian date.
300 */
301static int mxc_rtc_set_mmss(struct device *dev, time64_t time)
302{
303 struct platform_device *pdev = to_platform_device(dev);
304 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
305
306 /*
307 * TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
308 */
309 if (is_imx1_rtc(pdata)) {
310 struct rtc_time tm;
311
312 rtc_time64_to_tm(time, &tm);
313 tm.tm_year = 70;
314 time = rtc_tm_to_time64(&tm);
315 }
316
317 /* Avoid roll-over from reading the different registers */
318 do {
319 set_alarm_or_time(dev, MXC_RTC_TIME, time);
320 } while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
321
322 return 0;
323}
324
325/*
326 * This function reads the current alarm value into the passed in 'alrm'
327 * argument. It updates the alrm's pending field value based on the whether
328 * an alarm interrupt occurs or not.
329 */
330static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
331{
332 struct platform_device *pdev = to_platform_device(dev);
333 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
334 void __iomem *ioaddr = pdata->ioaddr;
335
336 rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
337 alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
338
339 return 0;
340}
341
342/*
343 * This function sets the RTC alarm based on passed in alrm.
344 */
345static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
346{
347 struct platform_device *pdev = to_platform_device(dev);
348 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
349
350 rtc_update_alarm(dev, &alrm->time);
351
352 memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
353 mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
354
355 return 0;
356}
357
358/* RTC layer */
359static struct rtc_class_ops mxc_rtc_ops = {
360 .release = mxc_rtc_release,
361 .read_time = mxc_rtc_read_time,
362 .set_mmss64 = mxc_rtc_set_mmss,
363 .read_alarm = mxc_rtc_read_alarm,
364 .set_alarm = mxc_rtc_set_alarm,
365 .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
366};
367
368static int mxc_rtc_probe(struct platform_device *pdev)
369{
370 struct resource *res;
371 struct rtc_device *rtc;
372 struct rtc_plat_data *pdata = NULL;
373 u32 reg;
374 unsigned long rate;
375 int ret;
376 const struct of_device_id *of_id;
377
378 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
379 if (!pdata)
380 return -ENOMEM;
381
382 of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
383 if (of_id)
384 pdata->devtype = (enum imx_rtc_type)of_id->data;
385 else
386 pdata->devtype = pdev->id_entry->driver_data;
387
388 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
389 pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
390 if (IS_ERR(pdata->ioaddr))
391 return PTR_ERR(pdata->ioaddr);
392
393 pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
394 if (IS_ERR(pdata->clk_ipg)) {
395 dev_err(&pdev->dev, "unable to get ipg clock!\n");
396 return PTR_ERR(pdata->clk_ipg);
397 }
398
399 ret = clk_prepare_enable(pdata->clk_ipg);
400 if (ret)
401 return ret;
402
403 pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
404 if (IS_ERR(pdata->clk_ref)) {
405 dev_err(&pdev->dev, "unable to get ref clock!\n");
406 ret = PTR_ERR(pdata->clk_ref);
407 goto exit_put_clk_ipg;
408 }
409
410 ret = clk_prepare_enable(pdata->clk_ref);
411 if (ret)
412 goto exit_put_clk_ipg;
413
414 rate = clk_get_rate(pdata->clk_ref);
415
416 if (rate == 32768)
417 reg = RTC_INPUT_CLK_32768HZ;
418 else if (rate == 32000)
419 reg = RTC_INPUT_CLK_32000HZ;
420 else if (rate == 38400)
421 reg = RTC_INPUT_CLK_38400HZ;
422 else {
423 dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
424 ret = -EINVAL;
425 goto exit_put_clk_ref;
426 }
427
428 reg |= RTC_ENABLE_BIT;
429 writew(reg, (pdata->ioaddr + RTC_RTCCTL));
430 if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
431 dev_err(&pdev->dev, "hardware module can't be enabled!\n");
432 ret = -EIO;
433 goto exit_put_clk_ref;
434 }
435
436 platform_set_drvdata(pdev, pdata);
437
438 /* Configure and enable the RTC */
439 pdata->irq = platform_get_irq(pdev, 0);
440
441 if (pdata->irq >= 0 &&
442 devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
443 IRQF_SHARED, pdev->name, pdev) < 0) {
444 dev_warn(&pdev->dev, "interrupt not available.\n");
445 pdata->irq = -1;
446 }
447
448 if (pdata->irq >= 0)
449 device_init_wakeup(&pdev->dev, 1);
450
451 rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
452 THIS_MODULE);
453 if (IS_ERR(rtc)) {
454 ret = PTR_ERR(rtc);
455 goto exit_put_clk_ref;
456 }
457
458 pdata->rtc = rtc;
459
460 return 0;
461
462exit_put_clk_ref:
463 clk_disable_unprepare(pdata->clk_ref);
464exit_put_clk_ipg:
465 clk_disable_unprepare(pdata->clk_ipg);
466
467 return ret;
468}
469
470static int mxc_rtc_remove(struct platform_device *pdev)
471{
472 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
473
474 clk_disable_unprepare(pdata->clk_ref);
475 clk_disable_unprepare(pdata->clk_ipg);
476
477 return 0;
478}
479
480#ifdef CONFIG_PM_SLEEP
481static int mxc_rtc_suspend(struct device *dev)
482{
483 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
484
485 if (device_may_wakeup(dev))
486 enable_irq_wake(pdata->irq);
487
488 return 0;
489}
490
491static int mxc_rtc_resume(struct device *dev)
492{
493 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
494
495 if (device_may_wakeup(dev))
496 disable_irq_wake(pdata->irq);
497
498 return 0;
499}
500#endif
501
502static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
503
504static struct platform_driver mxc_rtc_driver = {
505 .driver = {
506 .name = "mxc_rtc",
507 .of_match_table = of_match_ptr(imx_rtc_dt_ids),
508 .pm = &mxc_rtc_pm_ops,
509 },
510 .id_table = imx_rtc_devtype,
511 .probe = mxc_rtc_probe,
512 .remove = mxc_rtc_remove,
513};
514
515module_platform_driver(mxc_rtc_driver)
516
517MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
518MODULE_DESCRIPTION("RTC driver for Freescale MXC");
519MODULE_LICENSE("GPL");
520
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
4
5#include <linux/io.h>
6#include <linux/rtc.h>
7#include <linux/module.h>
8#include <linux/slab.h>
9#include <linux/interrupt.h>
10#include <linux/platform_device.h>
11#include <linux/pm_wakeirq.h>
12#include <linux/clk.h>
13#include <linux/of.h>
14
15#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
16#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
17#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
18
19#define RTC_SW_BIT (1 << 0)
20#define RTC_ALM_BIT (1 << 2)
21#define RTC_1HZ_BIT (1 << 4)
22#define RTC_2HZ_BIT (1 << 7)
23#define RTC_SAM0_BIT (1 << 8)
24#define RTC_SAM1_BIT (1 << 9)
25#define RTC_SAM2_BIT (1 << 10)
26#define RTC_SAM3_BIT (1 << 11)
27#define RTC_SAM4_BIT (1 << 12)
28#define RTC_SAM5_BIT (1 << 13)
29#define RTC_SAM6_BIT (1 << 14)
30#define RTC_SAM7_BIT (1 << 15)
31#define PIT_ALL_ON (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
32 RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
33 RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
34
35#define RTC_ENABLE_BIT (1 << 7)
36
37#define MAX_PIE_NUM 9
38#define MAX_PIE_FREQ 512
39
40#define MXC_RTC_TIME 0
41#define MXC_RTC_ALARM 1
42
43#define RTC_HOURMIN 0x00 /* 32bit rtc hour/min counter reg */
44#define RTC_SECOND 0x04 /* 32bit rtc seconds counter reg */
45#define RTC_ALRM_HM 0x08 /* 32bit rtc alarm hour/min reg */
46#define RTC_ALRM_SEC 0x0C /* 32bit rtc alarm seconds reg */
47#define RTC_RTCCTL 0x10 /* 32bit rtc control reg */
48#define RTC_RTCISR 0x14 /* 32bit rtc interrupt status reg */
49#define RTC_RTCIENR 0x18 /* 32bit rtc interrupt enable reg */
50#define RTC_STPWCH 0x1C /* 32bit rtc stopwatch min reg */
51#define RTC_DAYR 0x20 /* 32bit rtc days counter reg */
52#define RTC_DAYALARM 0x24 /* 32bit rtc day alarm reg */
53#define RTC_TEST1 0x28 /* 32bit rtc test reg 1 */
54#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
55#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
56
57enum imx_rtc_type {
58 IMX1_RTC,
59 IMX21_RTC,
60};
61
62struct rtc_plat_data {
63 struct rtc_device *rtc;
64 void __iomem *ioaddr;
65 int irq;
66 struct clk *clk_ref;
67 struct clk *clk_ipg;
68 struct rtc_time g_rtc_alarm;
69 enum imx_rtc_type devtype;
70};
71
72static const struct of_device_id imx_rtc_dt_ids[] = {
73 { .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
74 { .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
75 {}
76};
77MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
78
79static inline int is_imx1_rtc(struct rtc_plat_data *data)
80{
81 return data->devtype == IMX1_RTC;
82}
83
84/*
85 * This function is used to obtain the RTC time or the alarm value in
86 * second.
87 */
88static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
89{
90 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
91 void __iomem *ioaddr = pdata->ioaddr;
92 u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
93
94 switch (time_alarm) {
95 case MXC_RTC_TIME:
96 day = readw(ioaddr + RTC_DAYR);
97 hr_min = readw(ioaddr + RTC_HOURMIN);
98 sec = readw(ioaddr + RTC_SECOND);
99 break;
100 case MXC_RTC_ALARM:
101 day = readw(ioaddr + RTC_DAYALARM);
102 hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
103 sec = readw(ioaddr + RTC_ALRM_SEC);
104 break;
105 }
106
107 hr = hr_min >> 8;
108 min = hr_min & 0xff;
109
110 return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
111}
112
113/*
114 * This function sets the RTC alarm value or the time value.
115 */
116static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
117{
118 u32 tod, day, hr, min, sec, temp;
119 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
120 void __iomem *ioaddr = pdata->ioaddr;
121
122 day = div_s64_rem(time, 86400, &tod);
123
124 /* time is within a day now */
125 hr = tod / 3600;
126 tod -= hr * 3600;
127
128 /* time is within an hour now */
129 min = tod / 60;
130 sec = tod - min * 60;
131
132 temp = (hr << 8) + min;
133
134 switch (time_alarm) {
135 case MXC_RTC_TIME:
136 writew(day, ioaddr + RTC_DAYR);
137 writew(sec, ioaddr + RTC_SECOND);
138 writew(temp, ioaddr + RTC_HOURMIN);
139 break;
140 case MXC_RTC_ALARM:
141 writew(day, ioaddr + RTC_DAYALARM);
142 writew(sec, ioaddr + RTC_ALRM_SEC);
143 writew(temp, ioaddr + RTC_ALRM_HM);
144 break;
145 }
146}
147
148/*
149 * This function updates the RTC alarm registers and then clears all the
150 * interrupt status bits.
151 */
152static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
153{
154 time64_t time;
155 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
156 void __iomem *ioaddr = pdata->ioaddr;
157
158 time = rtc_tm_to_time64(alrm);
159
160 /* clear all the interrupt status bits */
161 writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
162 set_alarm_or_time(dev, MXC_RTC_ALARM, time);
163}
164
165static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
166 unsigned int enabled)
167{
168 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
169 void __iomem *ioaddr = pdata->ioaddr;
170 u32 reg;
171 unsigned long flags;
172
173 spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
174 reg = readw(ioaddr + RTC_RTCIENR);
175
176 if (enabled)
177 reg |= bit;
178 else
179 reg &= ~bit;
180
181 writew(reg, ioaddr + RTC_RTCIENR);
182 spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
183}
184
185/* This function is the RTC interrupt service routine. */
186static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
187{
188 struct platform_device *pdev = dev_id;
189 struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
190 void __iomem *ioaddr = pdata->ioaddr;
191 u32 status;
192 u32 events = 0;
193
194 spin_lock(&pdata->rtc->irq_lock);
195 status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
196 /* clear interrupt sources */
197 writew(status, ioaddr + RTC_RTCISR);
198
199 /* update irq data & counter */
200 if (status & RTC_ALM_BIT) {
201 events |= (RTC_AF | RTC_IRQF);
202 /* RTC alarm should be one-shot */
203 mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
204 }
205
206 if (status & PIT_ALL_ON)
207 events |= (RTC_PF | RTC_IRQF);
208
209 rtc_update_irq(pdata->rtc, 1, events);
210 spin_unlock(&pdata->rtc->irq_lock);
211
212 return IRQ_HANDLED;
213}
214
215static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
216{
217 mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
218 return 0;
219}
220
221/*
222 * This function reads the current RTC time into tm in Gregorian date.
223 */
224static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
225{
226 time64_t val;
227
228 /* Avoid roll-over from reading the different registers */
229 do {
230 val = get_alarm_or_time(dev, MXC_RTC_TIME);
231 } while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
232
233 rtc_time64_to_tm(val, tm);
234
235 return 0;
236}
237
238/*
239 * This function sets the internal RTC time based on tm in Gregorian date.
240 */
241static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
242{
243 time64_t time = rtc_tm_to_time64(tm);
244
245 /* Avoid roll-over from reading the different registers */
246 do {
247 set_alarm_or_time(dev, MXC_RTC_TIME, time);
248 } while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
249
250 return 0;
251}
252
253/*
254 * This function reads the current alarm value into the passed in 'alrm'
255 * argument. It updates the alrm's pending field value based on the whether
256 * an alarm interrupt occurs or not.
257 */
258static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
259{
260 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
261 void __iomem *ioaddr = pdata->ioaddr;
262
263 rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
264 alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
265
266 return 0;
267}
268
269/*
270 * This function sets the RTC alarm based on passed in alrm.
271 */
272static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
273{
274 struct rtc_plat_data *pdata = dev_get_drvdata(dev);
275
276 rtc_update_alarm(dev, &alrm->time);
277
278 memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
279 mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
280
281 return 0;
282}
283
284/* RTC layer */
285static const struct rtc_class_ops mxc_rtc_ops = {
286 .read_time = mxc_rtc_read_time,
287 .set_time = mxc_rtc_set_time,
288 .read_alarm = mxc_rtc_read_alarm,
289 .set_alarm = mxc_rtc_set_alarm,
290 .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
291};
292
293static int mxc_rtc_probe(struct platform_device *pdev)
294{
295 struct rtc_device *rtc;
296 struct rtc_plat_data *pdata = NULL;
297 u32 reg;
298 unsigned long rate;
299 int ret;
300
301 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
302 if (!pdata)
303 return -ENOMEM;
304
305 pdata->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev);
306
307 pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
308 if (IS_ERR(pdata->ioaddr))
309 return PTR_ERR(pdata->ioaddr);
310
311 rtc = devm_rtc_allocate_device(&pdev->dev);
312 if (IS_ERR(rtc))
313 return PTR_ERR(rtc);
314
315 pdata->rtc = rtc;
316 rtc->ops = &mxc_rtc_ops;
317 if (is_imx1_rtc(pdata)) {
318 struct rtc_time tm;
319
320 /* 9bit days + hours minutes seconds */
321 rtc->range_max = (1 << 9) * 86400 - 1;
322
323 /*
324 * Set the start date as beginning of the current year. This can
325 * be overridden using device tree.
326 */
327 rtc_time64_to_tm(ktime_get_real_seconds(), &tm);
328 rtc->start_secs = mktime64(tm.tm_year, 1, 1, 0, 0, 0);
329 rtc->set_start_time = true;
330 } else {
331 /* 16bit days + hours minutes seconds */
332 rtc->range_max = (1 << 16) * 86400ULL - 1;
333 }
334
335 pdata->clk_ipg = devm_clk_get_enabled(&pdev->dev, "ipg");
336 if (IS_ERR(pdata->clk_ipg)) {
337 dev_err(&pdev->dev, "unable to get ipg clock!\n");
338 return PTR_ERR(pdata->clk_ipg);
339 }
340
341 pdata->clk_ref = devm_clk_get_enabled(&pdev->dev, "ref");
342 if (IS_ERR(pdata->clk_ref)) {
343 dev_err(&pdev->dev, "unable to get ref clock!\n");
344 return PTR_ERR(pdata->clk_ref);
345 }
346
347 rate = clk_get_rate(pdata->clk_ref);
348
349 if (rate == 32768)
350 reg = RTC_INPUT_CLK_32768HZ;
351 else if (rate == 32000)
352 reg = RTC_INPUT_CLK_32000HZ;
353 else if (rate == 38400)
354 reg = RTC_INPUT_CLK_38400HZ;
355 else {
356 dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
357 return -EINVAL;
358 }
359
360 reg |= RTC_ENABLE_BIT;
361 writew(reg, (pdata->ioaddr + RTC_RTCCTL));
362 if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
363 dev_err(&pdev->dev, "hardware module can't be enabled!\n");
364 return -EIO;
365 }
366
367 platform_set_drvdata(pdev, pdata);
368
369 /* Configure and enable the RTC */
370 pdata->irq = platform_get_irq(pdev, 0);
371
372 if (pdata->irq >= 0 &&
373 devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
374 IRQF_SHARED, pdev->name, pdev) < 0) {
375 dev_warn(&pdev->dev, "interrupt not available.\n");
376 pdata->irq = -1;
377 }
378
379 if (pdata->irq >= 0) {
380 device_init_wakeup(&pdev->dev, 1);
381 ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
382 if (ret)
383 dev_err(&pdev->dev, "failed to enable irq wake\n");
384 }
385
386 ret = devm_rtc_register_device(rtc);
387
388 return ret;
389}
390
391static struct platform_driver mxc_rtc_driver = {
392 .driver = {
393 .name = "mxc_rtc",
394 .of_match_table = imx_rtc_dt_ids,
395 },
396 .probe = mxc_rtc_probe,
397};
398
399module_platform_driver(mxc_rtc_driver)
400
401MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
402MODULE_DESCRIPTION("RTC driver for Freescale MXC");
403MODULE_LICENSE("GPL");
404