Loading...
Note: File does not exist in v4.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Linux I2C core
4 *
5 * Copyright (C) 1995-99 Simon G. Vogl
6 * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
7 * Mux support by Rodolfo Giometti <giometti@enneenne.com> and
8 * Michael Lawnick <michael.lawnick.ext@nsn.com>
9 *
10 * Copyright (C) 2013-2017 Wolfram Sang <wsa@kernel.org>
11 */
12
13#define pr_fmt(fmt) "i2c-core: " fmt
14
15#include <dt-bindings/i2c/i2c.h>
16#include <linux/acpi.h>
17#include <linux/clk/clk-conf.h>
18#include <linux/completion.h>
19#include <linux/debugfs.h>
20#include <linux/delay.h>
21#include <linux/err.h>
22#include <linux/errno.h>
23#include <linux/gpio/consumer.h>
24#include <linux/i2c.h>
25#include <linux/i2c-smbus.h>
26#include <linux/idr.h>
27#include <linux/init.h>
28#include <linux/interrupt.h>
29#include <linux/irqflags.h>
30#include <linux/jump_label.h>
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/mutex.h>
34#include <linux/of_device.h>
35#include <linux/of.h>
36#include <linux/of_irq.h>
37#include <linux/pinctrl/consumer.h>
38#include <linux/pinctrl/devinfo.h>
39#include <linux/pm_domain.h>
40#include <linux/pm_runtime.h>
41#include <linux/pm_wakeirq.h>
42#include <linux/property.h>
43#include <linux/rwsem.h>
44#include <linux/slab.h>
45
46#include "i2c-core.h"
47
48#define CREATE_TRACE_POINTS
49#include <trace/events/i2c.h>
50
51#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
52#define I2C_ADDR_OFFSET_SLAVE 0x1000
53
54#define I2C_ADDR_7BITS_MAX 0x77
55#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
56
57#define I2C_ADDR_DEVICE_ID 0x7c
58
59/*
60 * core_lock protects i2c_adapter_idr, and guarantees that device detection,
61 * deletion of detected devices are serialized
62 */
63static DEFINE_MUTEX(core_lock);
64static DEFINE_IDR(i2c_adapter_idr);
65
66static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
67
68static DEFINE_STATIC_KEY_FALSE(i2c_trace_msg_key);
69static bool is_registered;
70
71static struct dentry *i2c_debugfs_root;
72
73int i2c_transfer_trace_reg(void)
74{
75 static_branch_inc(&i2c_trace_msg_key);
76 return 0;
77}
78
79void i2c_transfer_trace_unreg(void)
80{
81 static_branch_dec(&i2c_trace_msg_key);
82}
83
84const char *i2c_freq_mode_string(u32 bus_freq_hz)
85{
86 switch (bus_freq_hz) {
87 case I2C_MAX_STANDARD_MODE_FREQ:
88 return "Standard Mode (100 kHz)";
89 case I2C_MAX_FAST_MODE_FREQ:
90 return "Fast Mode (400 kHz)";
91 case I2C_MAX_FAST_MODE_PLUS_FREQ:
92 return "Fast Mode Plus (1.0 MHz)";
93 case I2C_MAX_TURBO_MODE_FREQ:
94 return "Turbo Mode (1.4 MHz)";
95 case I2C_MAX_HIGH_SPEED_MODE_FREQ:
96 return "High Speed Mode (3.4 MHz)";
97 case I2C_MAX_ULTRA_FAST_MODE_FREQ:
98 return "Ultra Fast Mode (5.0 MHz)";
99 default:
100 return "Unknown Mode";
101 }
102}
103EXPORT_SYMBOL_GPL(i2c_freq_mode_string);
104
105const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
106 const struct i2c_client *client)
107{
108 if (!(id && client))
109 return NULL;
110
111 while (id->name[0]) {
112 if (strcmp(client->name, id->name) == 0)
113 return id;
114 id++;
115 }
116 return NULL;
117}
118EXPORT_SYMBOL_GPL(i2c_match_id);
119
120const void *i2c_get_match_data(const struct i2c_client *client)
121{
122 struct i2c_driver *driver = to_i2c_driver(client->dev.driver);
123 const struct i2c_device_id *match;
124 const void *data;
125
126 data = device_get_match_data(&client->dev);
127 if (!data) {
128 match = i2c_match_id(driver->id_table, client);
129 if (!match)
130 return NULL;
131
132 data = (const void *)match->driver_data;
133 }
134
135 return data;
136}
137EXPORT_SYMBOL(i2c_get_match_data);
138
139static int i2c_device_match(struct device *dev, const struct device_driver *drv)
140{
141 struct i2c_client *client = i2c_verify_client(dev);
142 const struct i2c_driver *driver;
143
144
145 /* Attempt an OF style match */
146 if (i2c_of_match_device(drv->of_match_table, client))
147 return 1;
148
149 /* Then ACPI style match */
150 if (acpi_driver_match_device(dev, drv))
151 return 1;
152
153 driver = to_i2c_driver(drv);
154
155 /* Finally an I2C match */
156 if (i2c_match_id(driver->id_table, client))
157 return 1;
158
159 return 0;
160}
161
162static int i2c_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
163{
164 const struct i2c_client *client = to_i2c_client(dev);
165 int rc;
166
167 rc = of_device_uevent_modalias(dev, env);
168 if (rc != -ENODEV)
169 return rc;
170
171 rc = acpi_device_uevent_modalias(dev, env);
172 if (rc != -ENODEV)
173 return rc;
174
175 return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
176}
177
178/* i2c bus recovery routines */
179static int get_scl_gpio_value(struct i2c_adapter *adap)
180{
181 return gpiod_get_value_cansleep(adap->bus_recovery_info->scl_gpiod);
182}
183
184static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
185{
186 gpiod_set_value_cansleep(adap->bus_recovery_info->scl_gpiod, val);
187}
188
189static int get_sda_gpio_value(struct i2c_adapter *adap)
190{
191 return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod);
192}
193
194static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
195{
196 gpiod_set_value_cansleep(adap->bus_recovery_info->sda_gpiod, val);
197}
198
199static int i2c_generic_bus_free(struct i2c_adapter *adap)
200{
201 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
202 int ret = -EOPNOTSUPP;
203
204 if (bri->get_bus_free)
205 ret = bri->get_bus_free(adap);
206 else if (bri->get_sda)
207 ret = bri->get_sda(adap);
208
209 if (ret < 0)
210 return ret;
211
212 return ret ? 0 : -EBUSY;
213}
214
215/*
216 * We are generating clock pulses. ndelay() determines durating of clk pulses.
217 * We will generate clock with rate 100 KHz and so duration of both clock levels
218 * is: delay in ns = (10^6 / 100) / 2
219 */
220#define RECOVERY_NDELAY 5000
221#define RECOVERY_CLK_CNT 9
222
223int i2c_generic_scl_recovery(struct i2c_adapter *adap)
224{
225 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
226 int i = 0, scl = 1, ret = 0;
227
228 if (bri->prepare_recovery)
229 bri->prepare_recovery(adap);
230 if (bri->pinctrl)
231 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
232
233 /*
234 * If we can set SDA, we will always create a STOP to ensure additional
235 * pulses will do no harm. This is achieved by letting SDA follow SCL
236 * half a cycle later. Check the 'incomplete_write_byte' fault injector
237 * for details. Note that we must honour tsu:sto, 4us, but lets use 5us
238 * here for simplicity.
239 */
240 bri->set_scl(adap, scl);
241 ndelay(RECOVERY_NDELAY);
242 if (bri->set_sda)
243 bri->set_sda(adap, scl);
244 ndelay(RECOVERY_NDELAY / 2);
245
246 /*
247 * By this time SCL is high, as we need to give 9 falling-rising edges
248 */
249 while (i++ < RECOVERY_CLK_CNT * 2) {
250 if (scl) {
251 /* SCL shouldn't be low here */
252 if (!bri->get_scl(adap)) {
253 dev_err(&adap->dev,
254 "SCL is stuck low, exit recovery\n");
255 ret = -EBUSY;
256 break;
257 }
258 }
259
260 scl = !scl;
261 bri->set_scl(adap, scl);
262 /* Creating STOP again, see above */
263 if (scl) {
264 /* Honour minimum tsu:sto */
265 ndelay(RECOVERY_NDELAY);
266 } else {
267 /* Honour minimum tf and thd:dat */
268 ndelay(RECOVERY_NDELAY / 2);
269 }
270 if (bri->set_sda)
271 bri->set_sda(adap, scl);
272 ndelay(RECOVERY_NDELAY / 2);
273
274 if (scl) {
275 ret = i2c_generic_bus_free(adap);
276 if (ret == 0)
277 break;
278 }
279 }
280
281 /* If we can't check bus status, assume recovery worked */
282 if (ret == -EOPNOTSUPP)
283 ret = 0;
284
285 if (bri->unprepare_recovery)
286 bri->unprepare_recovery(adap);
287 if (bri->pinctrl)
288 pinctrl_select_state(bri->pinctrl, bri->pins_default);
289
290 return ret;
291}
292EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
293
294int i2c_recover_bus(struct i2c_adapter *adap)
295{
296 if (!adap->bus_recovery_info)
297 return -EBUSY;
298
299 dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
300 return adap->bus_recovery_info->recover_bus(adap);
301}
302EXPORT_SYMBOL_GPL(i2c_recover_bus);
303
304static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
305{
306 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
307 struct device *dev = &adap->dev;
308 struct pinctrl *p = bri->pinctrl ?: dev_pinctrl(dev->parent);
309
310 bri->pinctrl = p;
311
312 /*
313 * we can't change states without pinctrl, so remove the states if
314 * populated
315 */
316 if (!p) {
317 bri->pins_default = NULL;
318 bri->pins_gpio = NULL;
319 return;
320 }
321
322 if (!bri->pins_default) {
323 bri->pins_default = pinctrl_lookup_state(p,
324 PINCTRL_STATE_DEFAULT);
325 if (IS_ERR(bri->pins_default)) {
326 dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n");
327 bri->pins_default = NULL;
328 }
329 }
330 if (!bri->pins_gpio) {
331 bri->pins_gpio = pinctrl_lookup_state(p, "gpio");
332 if (IS_ERR(bri->pins_gpio))
333 bri->pins_gpio = pinctrl_lookup_state(p, "recovery");
334
335 if (IS_ERR(bri->pins_gpio)) {
336 dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n");
337 bri->pins_gpio = NULL;
338 }
339 }
340
341 /* for pinctrl state changes, we need all the information */
342 if (bri->pins_default && bri->pins_gpio) {
343 dev_info(dev, "using pinctrl states for GPIO recovery");
344 } else {
345 bri->pinctrl = NULL;
346 bri->pins_default = NULL;
347 bri->pins_gpio = NULL;
348 }
349}
350
351static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
352{
353 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
354 struct device *dev = &adap->dev;
355 struct gpio_desc *gpiod;
356 int ret = 0;
357
358 /*
359 * don't touch the recovery information if the driver is not using
360 * generic SCL recovery
361 */
362 if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
363 return 0;
364
365 /*
366 * pins might be taken as GPIO, so we should inform pinctrl about
367 * this and move the state to GPIO
368 */
369 if (bri->pinctrl)
370 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
371
372 /*
373 * if there is incomplete or no recovery information, see if generic
374 * GPIO recovery is available
375 */
376 if (!bri->scl_gpiod) {
377 gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
378 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
379 ret = -EPROBE_DEFER;
380 goto cleanup_pinctrl_state;
381 }
382 if (!IS_ERR(gpiod)) {
383 bri->scl_gpiod = gpiod;
384 bri->recover_bus = i2c_generic_scl_recovery;
385 dev_info(dev, "using generic GPIOs for recovery\n");
386 }
387 }
388
389 /* SDA GPIOD line is optional, so we care about DEFER only */
390 if (!bri->sda_gpiod) {
391 /*
392 * We have SCL. Pull SCL low and wait a bit so that SDA glitches
393 * have no effect.
394 */
395 gpiod_direction_output(bri->scl_gpiod, 0);
396 udelay(10);
397 gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
398
399 /* Wait a bit in case of a SDA glitch, and then release SCL. */
400 udelay(10);
401 gpiod_direction_output(bri->scl_gpiod, 1);
402
403 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
404 ret = -EPROBE_DEFER;
405 goto cleanup_pinctrl_state;
406 }
407 if (!IS_ERR(gpiod))
408 bri->sda_gpiod = gpiod;
409 }
410
411cleanup_pinctrl_state:
412 /* change the state of the pins back to their default state */
413 if (bri->pinctrl)
414 pinctrl_select_state(bri->pinctrl, bri->pins_default);
415
416 return ret;
417}
418
419static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
420{
421 i2c_gpio_init_pinctrl_recovery(adap);
422 return i2c_gpio_init_generic_recovery(adap);
423}
424
425static int i2c_init_recovery(struct i2c_adapter *adap)
426{
427 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
428 bool is_error_level = true;
429 char *err_str;
430
431 if (!bri)
432 return 0;
433
434 if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
435 return -EPROBE_DEFER;
436
437 if (!bri->recover_bus) {
438 err_str = "no suitable method provided";
439 is_error_level = false;
440 goto err;
441 }
442
443 if (bri->scl_gpiod && bri->recover_bus == i2c_generic_scl_recovery) {
444 bri->get_scl = get_scl_gpio_value;
445 bri->set_scl = set_scl_gpio_value;
446 if (bri->sda_gpiod) {
447 bri->get_sda = get_sda_gpio_value;
448 /* FIXME: add proper flag instead of '0' once available */
449 if (gpiod_get_direction(bri->sda_gpiod) == 0)
450 bri->set_sda = set_sda_gpio_value;
451 }
452 } else if (bri->recover_bus == i2c_generic_scl_recovery) {
453 /* Generic SCL recovery */
454 if (!bri->set_scl || !bri->get_scl) {
455 err_str = "no {get|set}_scl() found";
456 goto err;
457 }
458 if (!bri->set_sda && !bri->get_sda) {
459 err_str = "either get_sda() or set_sda() needed";
460 goto err;
461 }
462 }
463
464 return 0;
465 err:
466 if (is_error_level)
467 dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
468 else
469 dev_dbg(&adap->dev, "Not using recovery: %s\n", err_str);
470 adap->bus_recovery_info = NULL;
471
472 return -EINVAL;
473}
474
475static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
476{
477 struct i2c_adapter *adap = client->adapter;
478 unsigned int irq;
479
480 if (!adap->host_notify_domain)
481 return -ENXIO;
482
483 if (client->flags & I2C_CLIENT_TEN)
484 return -EINVAL;
485
486 irq = irq_create_mapping(adap->host_notify_domain, client->addr);
487
488 return irq > 0 ? irq : -ENXIO;
489}
490
491static int i2c_device_probe(struct device *dev)
492{
493 struct i2c_client *client = i2c_verify_client(dev);
494 struct i2c_driver *driver;
495 bool do_power_on;
496 int status;
497
498 if (!client)
499 return 0;
500
501 client->irq = client->init_irq;
502
503 if (!client->irq) {
504 int irq = -ENOENT;
505
506 if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
507 dev_dbg(dev, "Using Host Notify IRQ\n");
508 /* Keep adapter active when Host Notify is required */
509 pm_runtime_get_sync(&client->adapter->dev);
510 irq = i2c_smbus_host_notify_to_irq(client);
511 } else if (dev->of_node) {
512 irq = of_irq_get_byname(dev->of_node, "irq");
513 if (irq == -EINVAL || irq == -ENODATA)
514 irq = of_irq_get(dev->of_node, 0);
515 } else if (ACPI_COMPANION(dev)) {
516 bool wake_capable;
517
518 irq = i2c_acpi_get_irq(client, &wake_capable);
519 if (irq > 0 && wake_capable)
520 client->flags |= I2C_CLIENT_WAKE;
521 }
522 if (irq == -EPROBE_DEFER) {
523 status = irq;
524 goto put_sync_adapter;
525 }
526
527 if (irq < 0)
528 irq = 0;
529
530 client->irq = irq;
531 }
532
533 driver = to_i2c_driver(dev->driver);
534
535 /*
536 * An I2C ID table is not mandatory, if and only if, a suitable OF
537 * or ACPI ID table is supplied for the probing device.
538 */
539 if (!driver->id_table &&
540 !acpi_driver_match_device(dev, dev->driver) &&
541 !i2c_of_match_device(dev->driver->of_match_table, client)) {
542 status = -ENODEV;
543 goto put_sync_adapter;
544 }
545
546 if (client->flags & I2C_CLIENT_WAKE) {
547 int wakeirq;
548
549 wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
550 if (wakeirq == -EPROBE_DEFER) {
551 status = wakeirq;
552 goto put_sync_adapter;
553 }
554
555 device_init_wakeup(&client->dev, true);
556
557 if (wakeirq > 0 && wakeirq != client->irq)
558 status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
559 else if (client->irq > 0)
560 status = dev_pm_set_wake_irq(dev, client->irq);
561 else
562 status = 0;
563
564 if (status)
565 dev_warn(&client->dev, "failed to set up wakeup irq\n");
566 }
567
568 dev_dbg(dev, "probe\n");
569
570 status = of_clk_set_defaults(dev->of_node, false);
571 if (status < 0)
572 goto err_clear_wakeup_irq;
573
574 do_power_on = !i2c_acpi_waive_d0_probe(dev);
575 status = dev_pm_domain_attach(&client->dev, do_power_on);
576 if (status)
577 goto err_clear_wakeup_irq;
578
579 client->devres_group_id = devres_open_group(&client->dev, NULL,
580 GFP_KERNEL);
581 if (!client->devres_group_id) {
582 status = -ENOMEM;
583 goto err_detach_pm_domain;
584 }
585
586 if (driver->probe)
587 status = driver->probe(client);
588 else
589 status = -EINVAL;
590
591 /*
592 * Note that we are not closing the devres group opened above so
593 * even resources that were attached to the device after probe is
594 * run are released when i2c_device_remove() is executed. This is
595 * needed as some drivers would allocate additional resources,
596 * for example when updating firmware.
597 */
598
599 if (status)
600 goto err_release_driver_resources;
601
602 return 0;
603
604err_release_driver_resources:
605 devres_release_group(&client->dev, client->devres_group_id);
606err_detach_pm_domain:
607 dev_pm_domain_detach(&client->dev, do_power_on);
608err_clear_wakeup_irq:
609 dev_pm_clear_wake_irq(&client->dev);
610 device_init_wakeup(&client->dev, false);
611put_sync_adapter:
612 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
613 pm_runtime_put_sync(&client->adapter->dev);
614
615 return status;
616}
617
618static void i2c_device_remove(struct device *dev)
619{
620 struct i2c_client *client = to_i2c_client(dev);
621 struct i2c_driver *driver;
622
623 driver = to_i2c_driver(dev->driver);
624 if (driver->remove) {
625 dev_dbg(dev, "remove\n");
626
627 driver->remove(client);
628 }
629
630 devres_release_group(&client->dev, client->devres_group_id);
631
632 dev_pm_domain_detach(&client->dev, true);
633
634 dev_pm_clear_wake_irq(&client->dev);
635 device_init_wakeup(&client->dev, false);
636
637 client->irq = 0;
638 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
639 pm_runtime_put(&client->adapter->dev);
640}
641
642static void i2c_device_shutdown(struct device *dev)
643{
644 struct i2c_client *client = i2c_verify_client(dev);
645 struct i2c_driver *driver;
646
647 if (!client || !dev->driver)
648 return;
649 driver = to_i2c_driver(dev->driver);
650 if (driver->shutdown)
651 driver->shutdown(client);
652 else if (client->irq > 0)
653 disable_irq(client->irq);
654}
655
656static void i2c_client_dev_release(struct device *dev)
657{
658 kfree(to_i2c_client(dev));
659}
660
661static ssize_t
662name_show(struct device *dev, struct device_attribute *attr, char *buf)
663{
664 return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
665 to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
666}
667static DEVICE_ATTR_RO(name);
668
669static ssize_t
670modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
671{
672 struct i2c_client *client = to_i2c_client(dev);
673 int len;
674
675 len = of_device_modalias(dev, buf, PAGE_SIZE);
676 if (len != -ENODEV)
677 return len;
678
679 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
680 if (len != -ENODEV)
681 return len;
682
683 return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
684}
685static DEVICE_ATTR_RO(modalias);
686
687static struct attribute *i2c_dev_attrs[] = {
688 &dev_attr_name.attr,
689 /* modalias helps coldplug: modprobe $(cat .../modalias) */
690 &dev_attr_modalias.attr,
691 NULL
692};
693ATTRIBUTE_GROUPS(i2c_dev);
694
695const struct bus_type i2c_bus_type = {
696 .name = "i2c",
697 .match = i2c_device_match,
698 .probe = i2c_device_probe,
699 .remove = i2c_device_remove,
700 .shutdown = i2c_device_shutdown,
701};
702EXPORT_SYMBOL_GPL(i2c_bus_type);
703
704const struct device_type i2c_client_type = {
705 .groups = i2c_dev_groups,
706 .uevent = i2c_device_uevent,
707 .release = i2c_client_dev_release,
708};
709EXPORT_SYMBOL_GPL(i2c_client_type);
710
711
712/**
713 * i2c_verify_client - return parameter as i2c_client, or NULL
714 * @dev: device, probably from some driver model iterator
715 *
716 * When traversing the driver model tree, perhaps using driver model
717 * iterators like @device_for_each_child(), you can't assume very much
718 * about the nodes you find. Use this function to avoid oopses caused
719 * by wrongly treating some non-I2C device as an i2c_client.
720 */
721struct i2c_client *i2c_verify_client(struct device *dev)
722{
723 return (dev->type == &i2c_client_type)
724 ? to_i2c_client(dev)
725 : NULL;
726}
727EXPORT_SYMBOL(i2c_verify_client);
728
729
730/* Return a unique address which takes the flags of the client into account */
731static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
732{
733 unsigned short addr = client->addr;
734
735 /* For some client flags, add an arbitrary offset to avoid collisions */
736 if (client->flags & I2C_CLIENT_TEN)
737 addr |= I2C_ADDR_OFFSET_TEN_BIT;
738
739 if (client->flags & I2C_CLIENT_SLAVE)
740 addr |= I2C_ADDR_OFFSET_SLAVE;
741
742 return addr;
743}
744
745/* This is a permissive address validity check, I2C address map constraints
746 * are purposely not enforced, except for the general call address. */
747static int i2c_check_addr_validity(unsigned int addr, unsigned short flags)
748{
749 if (flags & I2C_CLIENT_TEN) {
750 /* 10-bit address, all values are valid */
751 if (addr > 0x3ff)
752 return -EINVAL;
753 } else {
754 /* 7-bit address, reject the general call address */
755 if (addr == 0x00 || addr > 0x7f)
756 return -EINVAL;
757 }
758 return 0;
759}
760
761/* And this is a strict address validity check, used when probing. If a
762 * device uses a reserved address, then it shouldn't be probed. 7-bit
763 * addressing is assumed, 10-bit address devices are rare and should be
764 * explicitly enumerated. */
765int i2c_check_7bit_addr_validity_strict(unsigned short addr)
766{
767 /*
768 * Reserved addresses per I2C specification:
769 * 0x00 General call address / START byte
770 * 0x01 CBUS address
771 * 0x02 Reserved for different bus format
772 * 0x03 Reserved for future purposes
773 * 0x04-0x07 Hs-mode master code
774 * 0x78-0x7b 10-bit slave addressing
775 * 0x7c-0x7f Reserved for future purposes
776 */
777 if (addr < 0x08 || addr > 0x77)
778 return -EINVAL;
779 return 0;
780}
781
782static int __i2c_check_addr_busy(struct device *dev, void *addrp)
783{
784 struct i2c_client *client = i2c_verify_client(dev);
785 int addr = *(int *)addrp;
786
787 if (client && i2c_encode_flags_to_addr(client) == addr)
788 return -EBUSY;
789 return 0;
790}
791
792/* walk up mux tree */
793static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
794{
795 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
796 int result;
797
798 result = device_for_each_child(&adapter->dev, &addr,
799 __i2c_check_addr_busy);
800
801 if (!result && parent)
802 result = i2c_check_mux_parents(parent, addr);
803
804 return result;
805}
806
807/* recurse down mux tree */
808static int i2c_check_mux_children(struct device *dev, void *addrp)
809{
810 int result;
811
812 if (dev->type == &i2c_adapter_type)
813 result = device_for_each_child(dev, addrp,
814 i2c_check_mux_children);
815 else
816 result = __i2c_check_addr_busy(dev, addrp);
817
818 return result;
819}
820
821static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
822{
823 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
824 int result = 0;
825
826 if (parent)
827 result = i2c_check_mux_parents(parent, addr);
828
829 if (!result)
830 result = device_for_each_child(&adapter->dev, &addr,
831 i2c_check_mux_children);
832
833 return result;
834}
835
836/**
837 * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
838 * @adapter: Target I2C bus segment
839 * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
840 * locks only this branch in the adapter tree
841 */
842static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
843 unsigned int flags)
844{
845 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
846}
847
848/**
849 * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
850 * @adapter: Target I2C bus segment
851 * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
852 * trylocks only this branch in the adapter tree
853 */
854static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
855 unsigned int flags)
856{
857 return rt_mutex_trylock(&adapter->bus_lock);
858}
859
860/**
861 * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
862 * @adapter: Target I2C bus segment
863 * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
864 * unlocks only this branch in the adapter tree
865 */
866static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
867 unsigned int flags)
868{
869 rt_mutex_unlock(&adapter->bus_lock);
870}
871
872static void i2c_dev_set_name(struct i2c_adapter *adap,
873 struct i2c_client *client,
874 struct i2c_board_info const *info)
875{
876 struct acpi_device *adev = ACPI_COMPANION(&client->dev);
877
878 if (info && info->dev_name) {
879 dev_set_name(&client->dev, "i2c-%s", info->dev_name);
880 return;
881 }
882
883 if (adev) {
884 dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
885 return;
886 }
887
888 dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
889 i2c_encode_flags_to_addr(client));
890}
891
892int i2c_dev_irq_from_resources(const struct resource *resources,
893 unsigned int num_resources)
894{
895 struct irq_data *irqd;
896 int i;
897
898 for (i = 0; i < num_resources; i++) {
899 const struct resource *r = &resources[i];
900
901 if (resource_type(r) != IORESOURCE_IRQ)
902 continue;
903
904 if (r->flags & IORESOURCE_BITS) {
905 irqd = irq_get_irq_data(r->start);
906 if (!irqd)
907 break;
908
909 irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
910 }
911
912 return r->start;
913 }
914
915 return 0;
916}
917
918/*
919 * Serialize device instantiation in case it can be instantiated explicitly
920 * and by auto-detection
921 */
922static int i2c_lock_addr(struct i2c_adapter *adap, unsigned short addr,
923 unsigned short flags)
924{
925 if (!(flags & I2C_CLIENT_TEN) &&
926 test_and_set_bit(addr, adap->addrs_in_instantiation))
927 return -EBUSY;
928
929 return 0;
930}
931
932static void i2c_unlock_addr(struct i2c_adapter *adap, unsigned short addr,
933 unsigned short flags)
934{
935 if (!(flags & I2C_CLIENT_TEN))
936 clear_bit(addr, adap->addrs_in_instantiation);
937}
938
939/**
940 * i2c_new_client_device - instantiate an i2c device
941 * @adap: the adapter managing the device
942 * @info: describes one I2C device; bus_num is ignored
943 * Context: can sleep
944 *
945 * Create an i2c device. Binding is handled through driver model
946 * probe()/remove() methods. A driver may be bound to this device when we
947 * return from this function, or any later moment (e.g. maybe hotplugging will
948 * load the driver module). This call is not appropriate for use by mainboard
949 * initialization logic, which usually runs during an arch_initcall() long
950 * before any i2c_adapter could exist.
951 *
952 * This returns the new i2c client, which may be saved for later use with
953 * i2c_unregister_device(); or an ERR_PTR to describe the error.
954 */
955struct i2c_client *
956i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
957{
958 struct i2c_client *client;
959 bool need_put = false;
960 int status;
961
962 client = kzalloc(sizeof *client, GFP_KERNEL);
963 if (!client)
964 return ERR_PTR(-ENOMEM);
965
966 client->adapter = adap;
967
968 client->dev.platform_data = info->platform_data;
969 client->flags = info->flags;
970 client->addr = info->addr;
971
972 client->init_irq = info->irq;
973 if (!client->init_irq)
974 client->init_irq = i2c_dev_irq_from_resources(info->resources,
975 info->num_resources);
976
977 strscpy(client->name, info->type, sizeof(client->name));
978
979 status = i2c_check_addr_validity(client->addr, client->flags);
980 if (status) {
981 dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
982 client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
983 goto out_err_silent;
984 }
985
986 status = i2c_lock_addr(adap, client->addr, client->flags);
987 if (status)
988 goto out_err_silent;
989
990 /* Check for address business */
991 status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
992 if (status)
993 goto out_err;
994
995 client->dev.parent = &client->adapter->dev;
996 client->dev.bus = &i2c_bus_type;
997 client->dev.type = &i2c_client_type;
998 client->dev.of_node = of_node_get(info->of_node);
999 client->dev.fwnode = info->fwnode;
1000
1001 device_enable_async_suspend(&client->dev);
1002
1003 if (info->swnode) {
1004 status = device_add_software_node(&client->dev, info->swnode);
1005 if (status) {
1006 dev_err(&adap->dev,
1007 "Failed to add software node to client %s: %d\n",
1008 client->name, status);
1009 goto out_err_put_of_node;
1010 }
1011 }
1012
1013 i2c_dev_set_name(adap, client, info);
1014 status = device_register(&client->dev);
1015 if (status)
1016 goto out_remove_swnode;
1017
1018 dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
1019 client->name, dev_name(&client->dev));
1020
1021 i2c_unlock_addr(adap, client->addr, client->flags);
1022
1023 return client;
1024
1025out_remove_swnode:
1026 device_remove_software_node(&client->dev);
1027 need_put = true;
1028out_err_put_of_node:
1029 of_node_put(info->of_node);
1030out_err:
1031 dev_err(&adap->dev,
1032 "Failed to register i2c client %s at 0x%02x (%d)\n",
1033 client->name, client->addr, status);
1034 i2c_unlock_addr(adap, client->addr, client->flags);
1035out_err_silent:
1036 if (need_put)
1037 put_device(&client->dev);
1038 else
1039 kfree(client);
1040 return ERR_PTR(status);
1041}
1042EXPORT_SYMBOL_GPL(i2c_new_client_device);
1043
1044/**
1045 * i2c_unregister_device - reverse effect of i2c_new_*_device()
1046 * @client: value returned from i2c_new_*_device()
1047 * Context: can sleep
1048 */
1049void i2c_unregister_device(struct i2c_client *client)
1050{
1051 if (IS_ERR_OR_NULL(client))
1052 return;
1053
1054 if (client->dev.of_node) {
1055 of_node_clear_flag(client->dev.of_node, OF_POPULATED);
1056 of_node_put(client->dev.of_node);
1057 }
1058
1059 if (ACPI_COMPANION(&client->dev))
1060 acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
1061 device_remove_software_node(&client->dev);
1062 device_unregister(&client->dev);
1063}
1064EXPORT_SYMBOL_GPL(i2c_unregister_device);
1065
1066/**
1067 * i2c_find_device_by_fwnode() - find an i2c_client for the fwnode
1068 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_client
1069 *
1070 * Look up and return the &struct i2c_client corresponding to the @fwnode.
1071 * If no client can be found, or @fwnode is NULL, this returns NULL.
1072 *
1073 * The user must call put_device(&client->dev) once done with the i2c client.
1074 */
1075struct i2c_client *i2c_find_device_by_fwnode(struct fwnode_handle *fwnode)
1076{
1077 struct i2c_client *client;
1078 struct device *dev;
1079
1080 if (!fwnode)
1081 return NULL;
1082
1083 dev = bus_find_device_by_fwnode(&i2c_bus_type, fwnode);
1084 if (!dev)
1085 return NULL;
1086
1087 client = i2c_verify_client(dev);
1088 if (!client)
1089 put_device(dev);
1090
1091 return client;
1092}
1093EXPORT_SYMBOL(i2c_find_device_by_fwnode);
1094
1095
1096static const struct i2c_device_id dummy_id[] = {
1097 { "dummy", },
1098 { "smbus_host_notify", },
1099 { }
1100};
1101
1102static int dummy_probe(struct i2c_client *client)
1103{
1104 return 0;
1105}
1106
1107static struct i2c_driver dummy_driver = {
1108 .driver.name = "dummy",
1109 .probe = dummy_probe,
1110 .id_table = dummy_id,
1111};
1112
1113/**
1114 * i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1115 * @adapter: the adapter managing the device
1116 * @address: seven bit address to be used
1117 * Context: can sleep
1118 *
1119 * This returns an I2C client bound to the "dummy" driver, intended for use
1120 * with devices that consume multiple addresses. Examples of such chips
1121 * include various EEPROMS (like 24c04 and 24c08 models).
1122 *
1123 * These dummy devices have two main uses. First, most I2C and SMBus calls
1124 * except i2c_transfer() need a client handle; the dummy will be that handle.
1125 * And second, this prevents the specified address from being bound to a
1126 * different driver.
1127 *
1128 * This returns the new i2c client, which should be saved for later use with
1129 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1130 */
1131struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address)
1132{
1133 struct i2c_board_info info = {
1134 I2C_BOARD_INFO("dummy", address),
1135 };
1136
1137 return i2c_new_client_device(adapter, &info);
1138}
1139EXPORT_SYMBOL_GPL(i2c_new_dummy_device);
1140
1141static void devm_i2c_release_dummy(void *client)
1142{
1143 i2c_unregister_device(client);
1144}
1145
1146/**
1147 * devm_i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1148 * @dev: device the managed resource is bound to
1149 * @adapter: the adapter managing the device
1150 * @address: seven bit address to be used
1151 * Context: can sleep
1152 *
1153 * This is the device-managed version of @i2c_new_dummy_device. It returns the
1154 * new i2c client or an ERR_PTR in case of an error.
1155 */
1156struct i2c_client *devm_i2c_new_dummy_device(struct device *dev,
1157 struct i2c_adapter *adapter,
1158 u16 address)
1159{
1160 struct i2c_client *client;
1161 int ret;
1162
1163 client = i2c_new_dummy_device(adapter, address);
1164 if (IS_ERR(client))
1165 return client;
1166
1167 ret = devm_add_action_or_reset(dev, devm_i2c_release_dummy, client);
1168 if (ret)
1169 return ERR_PTR(ret);
1170
1171 return client;
1172}
1173EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
1174
1175/**
1176 * i2c_new_ancillary_device - Helper to get the instantiated secondary address
1177 * and create the associated device
1178 * @client: Handle to the primary client
1179 * @name: Handle to specify which secondary address to get
1180 * @default_addr: Used as a fallback if no secondary address was specified
1181 * Context: can sleep
1182 *
1183 * I2C clients can be composed of multiple I2C slaves bound together in a single
1184 * component. The I2C client driver then binds to the master I2C slave and needs
1185 * to create I2C dummy clients to communicate with all the other slaves.
1186 *
1187 * This function creates and returns an I2C dummy client whose I2C address is
1188 * retrieved from the platform firmware based on the given slave name. If no
1189 * address is specified by the firmware default_addr is used.
1190 *
1191 * On DT-based platforms the address is retrieved from the "reg" property entry
1192 * cell whose "reg-names" value matches the slave name.
1193 *
1194 * This returns the new i2c client, which should be saved for later use with
1195 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1196 */
1197struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
1198 const char *name,
1199 u16 default_addr)
1200{
1201 struct device_node *np = client->dev.of_node;
1202 u32 addr = default_addr;
1203 int i;
1204
1205 if (np) {
1206 i = of_property_match_string(np, "reg-names", name);
1207 if (i >= 0)
1208 of_property_read_u32_index(np, "reg", i, &addr);
1209 }
1210
1211 dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
1212 return i2c_new_dummy_device(client->adapter, addr);
1213}
1214EXPORT_SYMBOL_GPL(i2c_new_ancillary_device);
1215
1216/* ------------------------------------------------------------------------- */
1217
1218/* I2C bus adapters -- one roots each I2C or SMBUS segment */
1219
1220static void i2c_adapter_dev_release(struct device *dev)
1221{
1222 struct i2c_adapter *adap = to_i2c_adapter(dev);
1223 complete(&adap->dev_released);
1224}
1225
1226unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
1227{
1228 unsigned int depth = 0;
1229 struct device *parent;
1230
1231 for (parent = adapter->dev.parent; parent; parent = parent->parent)
1232 if (parent->type == &i2c_adapter_type)
1233 depth++;
1234
1235 WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
1236 "adapter depth exceeds lockdep subclass limit\n");
1237
1238 return depth;
1239}
1240EXPORT_SYMBOL_GPL(i2c_adapter_depth);
1241
1242/*
1243 * Let users instantiate I2C devices through sysfs. This can be used when
1244 * platform initialization code doesn't contain the proper data for
1245 * whatever reason. Also useful for drivers that do device detection and
1246 * detection fails, either because the device uses an unexpected address,
1247 * or this is a compatible device with different ID register values.
1248 *
1249 * Parameter checking may look overzealous, but we really don't want
1250 * the user to provide incorrect parameters.
1251 */
1252static ssize_t
1253new_device_store(struct device *dev, struct device_attribute *attr,
1254 const char *buf, size_t count)
1255{
1256 struct i2c_adapter *adap = to_i2c_adapter(dev);
1257 struct i2c_board_info info;
1258 struct i2c_client *client;
1259 char *blank, end;
1260 int res;
1261
1262 memset(&info, 0, sizeof(struct i2c_board_info));
1263
1264 blank = strchr(buf, ' ');
1265 if (!blank) {
1266 dev_err(dev, "%s: Missing parameters\n", "new_device");
1267 return -EINVAL;
1268 }
1269 if (blank - buf > I2C_NAME_SIZE - 1) {
1270 dev_err(dev, "%s: Invalid device name\n", "new_device");
1271 return -EINVAL;
1272 }
1273 memcpy(info.type, buf, blank - buf);
1274
1275 /* Parse remaining parameters, reject extra parameters */
1276 res = sscanf(++blank, "%hi%c", &info.addr, &end);
1277 if (res < 1) {
1278 dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
1279 return -EINVAL;
1280 }
1281 if (res > 1 && end != '\n') {
1282 dev_err(dev, "%s: Extra parameters\n", "new_device");
1283 return -EINVAL;
1284 }
1285
1286 if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
1287 info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
1288 info.flags |= I2C_CLIENT_TEN;
1289 }
1290
1291 if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
1292 info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
1293 info.flags |= I2C_CLIENT_SLAVE;
1294 }
1295
1296 client = i2c_new_client_device(adap, &info);
1297 if (IS_ERR(client))
1298 return PTR_ERR(client);
1299
1300 /* Keep track of the added device */
1301 mutex_lock(&adap->userspace_clients_lock);
1302 list_add_tail(&client->detected, &adap->userspace_clients);
1303 mutex_unlock(&adap->userspace_clients_lock);
1304 dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
1305 info.type, info.addr);
1306
1307 return count;
1308}
1309static DEVICE_ATTR_WO(new_device);
1310
1311/*
1312 * And of course let the users delete the devices they instantiated, if
1313 * they got it wrong. This interface can only be used to delete devices
1314 * instantiated by i2c_sysfs_new_device above. This guarantees that we
1315 * don't delete devices to which some kernel code still has references.
1316 *
1317 * Parameter checking may look overzealous, but we really don't want
1318 * the user to delete the wrong device.
1319 */
1320static ssize_t
1321delete_device_store(struct device *dev, struct device_attribute *attr,
1322 const char *buf, size_t count)
1323{
1324 struct i2c_adapter *adap = to_i2c_adapter(dev);
1325 struct i2c_client *client, *next;
1326 unsigned short addr;
1327 char end;
1328 int res;
1329
1330 /* Parse parameters, reject extra parameters */
1331 res = sscanf(buf, "%hi%c", &addr, &end);
1332 if (res < 1) {
1333 dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
1334 return -EINVAL;
1335 }
1336 if (res > 1 && end != '\n') {
1337 dev_err(dev, "%s: Extra parameters\n", "delete_device");
1338 return -EINVAL;
1339 }
1340
1341 /* Make sure the device was added through sysfs */
1342 res = -ENOENT;
1343 mutex_lock_nested(&adap->userspace_clients_lock,
1344 i2c_adapter_depth(adap));
1345 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1346 detected) {
1347 if (i2c_encode_flags_to_addr(client) == addr) {
1348 dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
1349 "delete_device", client->name, client->addr);
1350
1351 list_del(&client->detected);
1352 i2c_unregister_device(client);
1353 res = count;
1354 break;
1355 }
1356 }
1357 mutex_unlock(&adap->userspace_clients_lock);
1358
1359 if (res < 0)
1360 dev_err(dev, "%s: Can't find device in list\n",
1361 "delete_device");
1362 return res;
1363}
1364static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
1365 delete_device_store);
1366
1367static struct attribute *i2c_adapter_attrs[] = {
1368 &dev_attr_name.attr,
1369 &dev_attr_new_device.attr,
1370 &dev_attr_delete_device.attr,
1371 NULL
1372};
1373ATTRIBUTE_GROUPS(i2c_adapter);
1374
1375const struct device_type i2c_adapter_type = {
1376 .groups = i2c_adapter_groups,
1377 .release = i2c_adapter_dev_release,
1378};
1379EXPORT_SYMBOL_GPL(i2c_adapter_type);
1380
1381/**
1382 * i2c_verify_adapter - return parameter as i2c_adapter or NULL
1383 * @dev: device, probably from some driver model iterator
1384 *
1385 * When traversing the driver model tree, perhaps using driver model
1386 * iterators like @device_for_each_child(), you can't assume very much
1387 * about the nodes you find. Use this function to avoid oopses caused
1388 * by wrongly treating some non-I2C device as an i2c_adapter.
1389 */
1390struct i2c_adapter *i2c_verify_adapter(struct device *dev)
1391{
1392 return (dev->type == &i2c_adapter_type)
1393 ? to_i2c_adapter(dev)
1394 : NULL;
1395}
1396EXPORT_SYMBOL(i2c_verify_adapter);
1397
1398static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
1399{
1400 struct i2c_devinfo *devinfo;
1401
1402 down_read(&__i2c_board_lock);
1403 list_for_each_entry(devinfo, &__i2c_board_list, list) {
1404 if (devinfo->busnum == adapter->nr &&
1405 IS_ERR(i2c_new_client_device(adapter, &devinfo->board_info)))
1406 dev_err(&adapter->dev,
1407 "Can't create device at 0x%02x\n",
1408 devinfo->board_info.addr);
1409 }
1410 up_read(&__i2c_board_lock);
1411}
1412
1413static int i2c_do_add_adapter(struct i2c_driver *driver,
1414 struct i2c_adapter *adap)
1415{
1416 /* Detect supported devices on that bus, and instantiate them */
1417 i2c_detect(adap, driver);
1418
1419 return 0;
1420}
1421
1422static int __process_new_adapter(struct device_driver *d, void *data)
1423{
1424 return i2c_do_add_adapter(to_i2c_driver(d), data);
1425}
1426
1427static const struct i2c_lock_operations i2c_adapter_lock_ops = {
1428 .lock_bus = i2c_adapter_lock_bus,
1429 .trylock_bus = i2c_adapter_trylock_bus,
1430 .unlock_bus = i2c_adapter_unlock_bus,
1431};
1432
1433static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
1434{
1435 struct irq_domain *domain = adap->host_notify_domain;
1436 irq_hw_number_t hwirq;
1437
1438 if (!domain)
1439 return;
1440
1441 for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
1442 irq_dispose_mapping(irq_find_mapping(domain, hwirq));
1443
1444 irq_domain_remove(domain);
1445 adap->host_notify_domain = NULL;
1446}
1447
1448static int i2c_host_notify_irq_map(struct irq_domain *h,
1449 unsigned int virq,
1450 irq_hw_number_t hw_irq_num)
1451{
1452 irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
1453
1454 return 0;
1455}
1456
1457static const struct irq_domain_ops i2c_host_notify_irq_ops = {
1458 .map = i2c_host_notify_irq_map,
1459};
1460
1461static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
1462{
1463 struct irq_domain *domain;
1464
1465 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
1466 return 0;
1467
1468 domain = irq_domain_create_linear(adap->dev.parent->fwnode,
1469 I2C_ADDR_7BITS_COUNT,
1470 &i2c_host_notify_irq_ops, adap);
1471 if (!domain)
1472 return -ENOMEM;
1473
1474 adap->host_notify_domain = domain;
1475
1476 return 0;
1477}
1478
1479/**
1480 * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
1481 * I2C client.
1482 * @adap: the adapter
1483 * @addr: the I2C address of the notifying device
1484 * Context: can't sleep
1485 *
1486 * Helper function to be called from an I2C bus driver's interrupt
1487 * handler. It will schedule the Host Notify IRQ.
1488 */
1489int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
1490{
1491 int irq;
1492
1493 if (!adap)
1494 return -EINVAL;
1495
1496 dev_dbg(&adap->dev, "Detected HostNotify from address 0x%02x", addr);
1497
1498 irq = irq_find_mapping(adap->host_notify_domain, addr);
1499 if (irq <= 0)
1500 return -ENXIO;
1501
1502 generic_handle_irq_safe(irq);
1503
1504 return 0;
1505}
1506EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
1507
1508static int i2c_register_adapter(struct i2c_adapter *adap)
1509{
1510 int res = -EINVAL;
1511
1512 /* Can't register until after driver model init */
1513 if (WARN_ON(!is_registered)) {
1514 res = -EAGAIN;
1515 goto out_list;
1516 }
1517
1518 /* Sanity checks */
1519 if (WARN(!adap->name[0], "i2c adapter has no name"))
1520 goto out_list;
1521
1522 if (!adap->algo) {
1523 pr_err("adapter '%s': no algo supplied!\n", adap->name);
1524 goto out_list;
1525 }
1526
1527 if (!adap->lock_ops)
1528 adap->lock_ops = &i2c_adapter_lock_ops;
1529
1530 adap->locked_flags = 0;
1531 rt_mutex_init(&adap->bus_lock);
1532 rt_mutex_init(&adap->mux_lock);
1533 mutex_init(&adap->userspace_clients_lock);
1534 INIT_LIST_HEAD(&adap->userspace_clients);
1535
1536 /* Set default timeout to 1 second if not already set */
1537 if (adap->timeout == 0)
1538 adap->timeout = HZ;
1539
1540 /* register soft irqs for Host Notify */
1541 res = i2c_setup_host_notify_irq_domain(adap);
1542 if (res) {
1543 pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
1544 adap->name, res);
1545 goto out_list;
1546 }
1547
1548 dev_set_name(&adap->dev, "i2c-%d", adap->nr);
1549 adap->dev.bus = &i2c_bus_type;
1550 adap->dev.type = &i2c_adapter_type;
1551 device_initialize(&adap->dev);
1552
1553 /*
1554 * This adapter can be used as a parent immediately after device_add(),
1555 * setup runtime-pm (especially ignore-children) before hand.
1556 */
1557 device_enable_async_suspend(&adap->dev);
1558 pm_runtime_no_callbacks(&adap->dev);
1559 pm_suspend_ignore_children(&adap->dev, true);
1560 pm_runtime_enable(&adap->dev);
1561
1562 res = device_add(&adap->dev);
1563 if (res) {
1564 pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
1565 put_device(&adap->dev);
1566 goto out_list;
1567 }
1568
1569 adap->debugfs = debugfs_create_dir(dev_name(&adap->dev), i2c_debugfs_root);
1570
1571 res = i2c_setup_smbus_alert(adap);
1572 if (res)
1573 goto out_reg;
1574
1575 res = i2c_init_recovery(adap);
1576 if (res == -EPROBE_DEFER)
1577 goto out_reg;
1578
1579 dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
1580
1581 /* create pre-declared device nodes */
1582 of_i2c_register_devices(adap);
1583 i2c_acpi_install_space_handler(adap);
1584 i2c_acpi_register_devices(adap);
1585
1586 if (adap->nr < __i2c_first_dynamic_bus_num)
1587 i2c_scan_static_board_info(adap);
1588
1589 /* Notify drivers */
1590 mutex_lock(&core_lock);
1591 bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
1592 mutex_unlock(&core_lock);
1593
1594 return 0;
1595
1596out_reg:
1597 debugfs_remove_recursive(adap->debugfs);
1598 init_completion(&adap->dev_released);
1599 device_unregister(&adap->dev);
1600 wait_for_completion(&adap->dev_released);
1601out_list:
1602 mutex_lock(&core_lock);
1603 idr_remove(&i2c_adapter_idr, adap->nr);
1604 mutex_unlock(&core_lock);
1605 return res;
1606}
1607
1608/**
1609 * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
1610 * @adap: the adapter to register (with adap->nr initialized)
1611 * Context: can sleep
1612 *
1613 * See i2c_add_numbered_adapter() for details.
1614 */
1615static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
1616{
1617 int id;
1618
1619 mutex_lock(&core_lock);
1620 id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
1621 mutex_unlock(&core_lock);
1622 if (WARN(id < 0, "couldn't get idr"))
1623 return id == -ENOSPC ? -EBUSY : id;
1624
1625 return i2c_register_adapter(adap);
1626}
1627
1628/**
1629 * i2c_add_adapter - declare i2c adapter, use dynamic bus number
1630 * @adapter: the adapter to add
1631 * Context: can sleep
1632 *
1633 * This routine is used to declare an I2C adapter when its bus number
1634 * doesn't matter or when its bus number is specified by an dt alias.
1635 * Examples of bases when the bus number doesn't matter: I2C adapters
1636 * dynamically added by USB links or PCI plugin cards.
1637 *
1638 * When this returns zero, a new bus number was allocated and stored
1639 * in adap->nr, and the specified adapter became available for clients.
1640 * Otherwise, a negative errno value is returned.
1641 */
1642int i2c_add_adapter(struct i2c_adapter *adapter)
1643{
1644 struct device *dev = &adapter->dev;
1645 int id;
1646
1647 if (dev->of_node) {
1648 id = of_alias_get_id(dev->of_node, "i2c");
1649 if (id >= 0) {
1650 adapter->nr = id;
1651 return __i2c_add_numbered_adapter(adapter);
1652 }
1653 }
1654
1655 mutex_lock(&core_lock);
1656 id = idr_alloc(&i2c_adapter_idr, adapter,
1657 __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
1658 mutex_unlock(&core_lock);
1659 if (WARN(id < 0, "couldn't get idr"))
1660 return id;
1661
1662 adapter->nr = id;
1663
1664 return i2c_register_adapter(adapter);
1665}
1666EXPORT_SYMBOL(i2c_add_adapter);
1667
1668/**
1669 * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
1670 * @adap: the adapter to register (with adap->nr initialized)
1671 * Context: can sleep
1672 *
1673 * This routine is used to declare an I2C adapter when its bus number
1674 * matters. For example, use it for I2C adapters from system-on-chip CPUs,
1675 * or otherwise built in to the system's mainboard, and where i2c_board_info
1676 * is used to properly configure I2C devices.
1677 *
1678 * If the requested bus number is set to -1, then this function will behave
1679 * identically to i2c_add_adapter, and will dynamically assign a bus number.
1680 *
1681 * If no devices have pre-been declared for this bus, then be sure to
1682 * register the adapter before any dynamically allocated ones. Otherwise
1683 * the required bus ID may not be available.
1684 *
1685 * When this returns zero, the specified adapter became available for
1686 * clients using the bus number provided in adap->nr. Also, the table
1687 * of I2C devices pre-declared using i2c_register_board_info() is scanned,
1688 * and the appropriate driver model device nodes are created. Otherwise, a
1689 * negative errno value is returned.
1690 */
1691int i2c_add_numbered_adapter(struct i2c_adapter *adap)
1692{
1693 if (adap->nr == -1) /* -1 means dynamically assign bus id */
1694 return i2c_add_adapter(adap);
1695
1696 return __i2c_add_numbered_adapter(adap);
1697}
1698EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
1699
1700static void i2c_do_del_adapter(struct i2c_driver *driver,
1701 struct i2c_adapter *adapter)
1702{
1703 struct i2c_client *client, *_n;
1704
1705 /* Remove the devices we created ourselves as the result of hardware
1706 * probing (using a driver's detect method) */
1707 list_for_each_entry_safe(client, _n, &driver->clients, detected) {
1708 if (client->adapter == adapter) {
1709 dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
1710 client->name, client->addr);
1711 list_del(&client->detected);
1712 i2c_unregister_device(client);
1713 }
1714 }
1715}
1716
1717static int __unregister_client(struct device *dev, void *dummy)
1718{
1719 struct i2c_client *client = i2c_verify_client(dev);
1720 if (client && strcmp(client->name, "dummy"))
1721 i2c_unregister_device(client);
1722 return 0;
1723}
1724
1725static int __unregister_dummy(struct device *dev, void *dummy)
1726{
1727 struct i2c_client *client = i2c_verify_client(dev);
1728 i2c_unregister_device(client);
1729 return 0;
1730}
1731
1732static int __process_removed_adapter(struct device_driver *d, void *data)
1733{
1734 i2c_do_del_adapter(to_i2c_driver(d), data);
1735 return 0;
1736}
1737
1738/**
1739 * i2c_del_adapter - unregister I2C adapter
1740 * @adap: the adapter being unregistered
1741 * Context: can sleep
1742 *
1743 * This unregisters an I2C adapter which was previously registered
1744 * by @i2c_add_adapter or @i2c_add_numbered_adapter.
1745 */
1746void i2c_del_adapter(struct i2c_adapter *adap)
1747{
1748 struct i2c_adapter *found;
1749 struct i2c_client *client, *next;
1750
1751 /* First make sure that this adapter was ever added */
1752 mutex_lock(&core_lock);
1753 found = idr_find(&i2c_adapter_idr, adap->nr);
1754 mutex_unlock(&core_lock);
1755 if (found != adap) {
1756 pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
1757 return;
1758 }
1759
1760 i2c_acpi_remove_space_handler(adap);
1761 /* Tell drivers about this removal */
1762 mutex_lock(&core_lock);
1763 bus_for_each_drv(&i2c_bus_type, NULL, adap,
1764 __process_removed_adapter);
1765 mutex_unlock(&core_lock);
1766
1767 /* Remove devices instantiated from sysfs */
1768 mutex_lock_nested(&adap->userspace_clients_lock,
1769 i2c_adapter_depth(adap));
1770 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1771 detected) {
1772 dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
1773 client->addr);
1774 list_del(&client->detected);
1775 i2c_unregister_device(client);
1776 }
1777 mutex_unlock(&adap->userspace_clients_lock);
1778
1779 /* Detach any active clients. This can't fail, thus we do not
1780 * check the returned value. This is a two-pass process, because
1781 * we can't remove the dummy devices during the first pass: they
1782 * could have been instantiated by real devices wishing to clean
1783 * them up properly, so we give them a chance to do that first. */
1784 device_for_each_child(&adap->dev, NULL, __unregister_client);
1785 device_for_each_child(&adap->dev, NULL, __unregister_dummy);
1786
1787 /* device name is gone after device_unregister */
1788 dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
1789
1790 pm_runtime_disable(&adap->dev);
1791
1792 i2c_host_notify_irq_teardown(adap);
1793
1794 debugfs_remove_recursive(adap->debugfs);
1795
1796 /* wait until all references to the device are gone
1797 *
1798 * FIXME: This is old code and should ideally be replaced by an
1799 * alternative which results in decoupling the lifetime of the struct
1800 * device from the i2c_adapter, like spi or netdev do. Any solution
1801 * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
1802 */
1803 init_completion(&adap->dev_released);
1804 device_unregister(&adap->dev);
1805 wait_for_completion(&adap->dev_released);
1806
1807 /* free bus id */
1808 mutex_lock(&core_lock);
1809 idr_remove(&i2c_adapter_idr, adap->nr);
1810 mutex_unlock(&core_lock);
1811
1812 /* Clear the device structure in case this adapter is ever going to be
1813 added again */
1814 memset(&adap->dev, 0, sizeof(adap->dev));
1815}
1816EXPORT_SYMBOL(i2c_del_adapter);
1817
1818static void devm_i2c_del_adapter(void *adapter)
1819{
1820 i2c_del_adapter(adapter);
1821}
1822
1823/**
1824 * devm_i2c_add_adapter - device-managed variant of i2c_add_adapter()
1825 * @dev: managing device for adding this I2C adapter
1826 * @adapter: the adapter to add
1827 * Context: can sleep
1828 *
1829 * Add adapter with dynamic bus number, same with i2c_add_adapter()
1830 * but the adapter will be auto deleted on driver detach.
1831 */
1832int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter)
1833{
1834 int ret;
1835
1836 ret = i2c_add_adapter(adapter);
1837 if (ret)
1838 return ret;
1839
1840 return devm_add_action_or_reset(dev, devm_i2c_del_adapter, adapter);
1841}
1842EXPORT_SYMBOL_GPL(devm_i2c_add_adapter);
1843
1844static int i2c_dev_or_parent_fwnode_match(struct device *dev, const void *data)
1845{
1846 if (dev_fwnode(dev) == data)
1847 return 1;
1848
1849 if (dev->parent && dev_fwnode(dev->parent) == data)
1850 return 1;
1851
1852 return 0;
1853}
1854
1855/**
1856 * i2c_find_adapter_by_fwnode() - find an i2c_adapter for the fwnode
1857 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_adapter
1858 *
1859 * Look up and return the &struct i2c_adapter corresponding to the @fwnode.
1860 * If no adapter can be found, or @fwnode is NULL, this returns NULL.
1861 *
1862 * The user must call put_device(&adapter->dev) once done with the i2c adapter.
1863 */
1864struct i2c_adapter *i2c_find_adapter_by_fwnode(struct fwnode_handle *fwnode)
1865{
1866 struct i2c_adapter *adapter;
1867 struct device *dev;
1868
1869 if (!fwnode)
1870 return NULL;
1871
1872 dev = bus_find_device(&i2c_bus_type, NULL, fwnode,
1873 i2c_dev_or_parent_fwnode_match);
1874 if (!dev)
1875 return NULL;
1876
1877 adapter = i2c_verify_adapter(dev);
1878 if (!adapter)
1879 put_device(dev);
1880
1881 return adapter;
1882}
1883EXPORT_SYMBOL(i2c_find_adapter_by_fwnode);
1884
1885/**
1886 * i2c_get_adapter_by_fwnode() - find an i2c_adapter for the fwnode
1887 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_adapter
1888 *
1889 * Look up and return the &struct i2c_adapter corresponding to the @fwnode,
1890 * and increment the adapter module's use count. If no adapter can be found,
1891 * or @fwnode is NULL, this returns NULL.
1892 *
1893 * The user must call i2c_put_adapter(adapter) once done with the i2c adapter.
1894 * Note that this is different from i2c_find_adapter_by_node().
1895 */
1896struct i2c_adapter *i2c_get_adapter_by_fwnode(struct fwnode_handle *fwnode)
1897{
1898 struct i2c_adapter *adapter;
1899
1900 adapter = i2c_find_adapter_by_fwnode(fwnode);
1901 if (!adapter)
1902 return NULL;
1903
1904 if (!try_module_get(adapter->owner)) {
1905 put_device(&adapter->dev);
1906 adapter = NULL;
1907 }
1908
1909 return adapter;
1910}
1911EXPORT_SYMBOL(i2c_get_adapter_by_fwnode);
1912
1913static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
1914 u32 def_val, bool use_def)
1915{
1916 int ret;
1917
1918 ret = device_property_read_u32(dev, prop_name, cur_val_p);
1919 if (ret && use_def)
1920 *cur_val_p = def_val;
1921
1922 dev_dbg(dev, "%s: %u\n", prop_name, *cur_val_p);
1923}
1924
1925/**
1926 * i2c_parse_fw_timings - get I2C related timing parameters from firmware
1927 * @dev: The device to scan for I2C timing properties
1928 * @t: the i2c_timings struct to be filled with values
1929 * @use_defaults: bool to use sane defaults derived from the I2C specification
1930 * when properties are not found, otherwise don't update
1931 *
1932 * Scan the device for the generic I2C properties describing timing parameters
1933 * for the signal and fill the given struct with the results. If a property was
1934 * not found and use_defaults was true, then maximum timings are assumed which
1935 * are derived from the I2C specification. If use_defaults is not used, the
1936 * results will be as before, so drivers can apply their own defaults before
1937 * calling this helper. The latter is mainly intended for avoiding regressions
1938 * of existing drivers which want to switch to this function. New drivers
1939 * almost always should use the defaults.
1940 */
1941void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
1942{
1943 bool u = use_defaults;
1944 u32 d;
1945
1946 i2c_parse_timing(dev, "clock-frequency", &t->bus_freq_hz,
1947 I2C_MAX_STANDARD_MODE_FREQ, u);
1948
1949 d = t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ ? 1000 :
1950 t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1951 i2c_parse_timing(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns, d, u);
1952
1953 d = t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1954 i2c_parse_timing(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns, d, u);
1955
1956 i2c_parse_timing(dev, "i2c-scl-internal-delay-ns",
1957 &t->scl_int_delay_ns, 0, u);
1958 i2c_parse_timing(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns,
1959 t->scl_fall_ns, u);
1960 i2c_parse_timing(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns, 0, u);
1961 i2c_parse_timing(dev, "i2c-digital-filter-width-ns",
1962 &t->digital_filter_width_ns, 0, u);
1963 i2c_parse_timing(dev, "i2c-analog-filter-cutoff-frequency",
1964 &t->analog_filter_cutoff_freq_hz, 0, u);
1965}
1966EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
1967
1968/* ------------------------------------------------------------------------- */
1969
1970int i2c_for_each_dev(void *data, int (*fn)(struct device *dev, void *data))
1971{
1972 int res;
1973
1974 mutex_lock(&core_lock);
1975 res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
1976 mutex_unlock(&core_lock);
1977
1978 return res;
1979}
1980EXPORT_SYMBOL_GPL(i2c_for_each_dev);
1981
1982static int __process_new_driver(struct device *dev, void *data)
1983{
1984 if (dev->type != &i2c_adapter_type)
1985 return 0;
1986 return i2c_do_add_adapter(data, to_i2c_adapter(dev));
1987}
1988
1989/*
1990 * An i2c_driver is used with one or more i2c_client (device) nodes to access
1991 * i2c slave chips, on a bus instance associated with some i2c_adapter.
1992 */
1993
1994int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
1995{
1996 int res;
1997
1998 /* Can't register until after driver model init */
1999 if (WARN_ON(!is_registered))
2000 return -EAGAIN;
2001
2002 /* add the driver to the list of i2c drivers in the driver core */
2003 driver->driver.owner = owner;
2004 driver->driver.bus = &i2c_bus_type;
2005 INIT_LIST_HEAD(&driver->clients);
2006
2007 /* When registration returns, the driver core
2008 * will have called probe() for all matching-but-unbound devices.
2009 */
2010 res = driver_register(&driver->driver);
2011 if (res)
2012 return res;
2013
2014 pr_debug("driver [%s] registered\n", driver->driver.name);
2015
2016 /* Walk the adapters that are already present */
2017 i2c_for_each_dev(driver, __process_new_driver);
2018
2019 return 0;
2020}
2021EXPORT_SYMBOL(i2c_register_driver);
2022
2023static int __process_removed_driver(struct device *dev, void *data)
2024{
2025 if (dev->type == &i2c_adapter_type)
2026 i2c_do_del_adapter(data, to_i2c_adapter(dev));
2027 return 0;
2028}
2029
2030/**
2031 * i2c_del_driver - unregister I2C driver
2032 * @driver: the driver being unregistered
2033 * Context: can sleep
2034 */
2035void i2c_del_driver(struct i2c_driver *driver)
2036{
2037 i2c_for_each_dev(driver, __process_removed_driver);
2038
2039 driver_unregister(&driver->driver);
2040 pr_debug("driver [%s] unregistered\n", driver->driver.name);
2041}
2042EXPORT_SYMBOL(i2c_del_driver);
2043
2044/* ------------------------------------------------------------------------- */
2045
2046struct i2c_cmd_arg {
2047 unsigned cmd;
2048 void *arg;
2049};
2050
2051static int i2c_cmd(struct device *dev, void *_arg)
2052{
2053 struct i2c_client *client = i2c_verify_client(dev);
2054 struct i2c_cmd_arg *arg = _arg;
2055 struct i2c_driver *driver;
2056
2057 if (!client || !client->dev.driver)
2058 return 0;
2059
2060 driver = to_i2c_driver(client->dev.driver);
2061 if (driver->command)
2062 driver->command(client, arg->cmd, arg->arg);
2063 return 0;
2064}
2065
2066void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
2067{
2068 struct i2c_cmd_arg cmd_arg;
2069
2070 cmd_arg.cmd = cmd;
2071 cmd_arg.arg = arg;
2072 device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
2073}
2074EXPORT_SYMBOL(i2c_clients_command);
2075
2076static int __init i2c_init(void)
2077{
2078 int retval;
2079
2080 retval = of_alias_get_highest_id("i2c");
2081
2082 down_write(&__i2c_board_lock);
2083 if (retval >= __i2c_first_dynamic_bus_num)
2084 __i2c_first_dynamic_bus_num = retval + 1;
2085 up_write(&__i2c_board_lock);
2086
2087 retval = bus_register(&i2c_bus_type);
2088 if (retval)
2089 return retval;
2090
2091 is_registered = true;
2092
2093 i2c_debugfs_root = debugfs_create_dir("i2c", NULL);
2094
2095 retval = i2c_add_driver(&dummy_driver);
2096 if (retval)
2097 goto class_err;
2098
2099 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2100 WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
2101 if (IS_ENABLED(CONFIG_ACPI))
2102 WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
2103
2104 return 0;
2105
2106class_err:
2107 is_registered = false;
2108 bus_unregister(&i2c_bus_type);
2109 return retval;
2110}
2111
2112static void __exit i2c_exit(void)
2113{
2114 if (IS_ENABLED(CONFIG_ACPI))
2115 WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
2116 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2117 WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
2118 i2c_del_driver(&dummy_driver);
2119 debugfs_remove_recursive(i2c_debugfs_root);
2120 bus_unregister(&i2c_bus_type);
2121 tracepoint_synchronize_unregister();
2122}
2123
2124/* We must initialize early, because some subsystems register i2c drivers
2125 * in subsys_initcall() code, but are linked (and initialized) before i2c.
2126 */
2127postcore_initcall(i2c_init);
2128module_exit(i2c_exit);
2129
2130/* ----------------------------------------------------
2131 * the functional interface to the i2c busses.
2132 * ----------------------------------------------------
2133 */
2134
2135/* Check if val is exceeding the quirk IFF quirk is non 0 */
2136#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
2137
2138static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
2139{
2140 dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
2141 err_msg, msg->addr, msg->len,
2142 msg->flags & I2C_M_RD ? "read" : "write");
2143 return -EOPNOTSUPP;
2144}
2145
2146static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2147{
2148 const struct i2c_adapter_quirks *q = adap->quirks;
2149 int max_num = q->max_num_msgs, i;
2150 bool do_len_check = true;
2151
2152 if (q->flags & I2C_AQ_COMB) {
2153 max_num = 2;
2154
2155 /* special checks for combined messages */
2156 if (num == 2) {
2157 if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
2158 return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
2159
2160 if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
2161 return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
2162
2163 if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
2164 return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
2165
2166 if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
2167 return i2c_quirk_error(adap, &msgs[0], "msg too long");
2168
2169 if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
2170 return i2c_quirk_error(adap, &msgs[1], "msg too long");
2171
2172 do_len_check = false;
2173 }
2174 }
2175
2176 if (i2c_quirk_exceeded(num, max_num))
2177 return i2c_quirk_error(adap, &msgs[0], "too many messages");
2178
2179 for (i = 0; i < num; i++) {
2180 u16 len = msgs[i].len;
2181
2182 if (msgs[i].flags & I2C_M_RD) {
2183 if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
2184 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2185
2186 if (q->flags & I2C_AQ_NO_ZERO_LEN_READ && len == 0)
2187 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2188 } else {
2189 if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
2190 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2191
2192 if (q->flags & I2C_AQ_NO_ZERO_LEN_WRITE && len == 0)
2193 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2194 }
2195 }
2196
2197 return 0;
2198}
2199
2200/**
2201 * __i2c_transfer - unlocked flavor of i2c_transfer
2202 * @adap: Handle to I2C bus
2203 * @msgs: One or more messages to execute before STOP is issued to
2204 * terminate the operation; each message begins with a START.
2205 * @num: Number of messages to be executed.
2206 *
2207 * Returns negative errno, else the number of messages executed.
2208 *
2209 * Adapter lock must be held when calling this function. No debug logging
2210 * takes place.
2211 */
2212int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2213{
2214 unsigned long orig_jiffies;
2215 int ret, try;
2216
2217 if (!adap->algo->master_xfer) {
2218 dev_dbg(&adap->dev, "I2C level transfers not supported\n");
2219 return -EOPNOTSUPP;
2220 }
2221
2222 if (WARN_ON(!msgs || num < 1))
2223 return -EINVAL;
2224
2225 ret = __i2c_check_suspended(adap);
2226 if (ret)
2227 return ret;
2228
2229 if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
2230 return -EOPNOTSUPP;
2231
2232 /*
2233 * i2c_trace_msg_key gets enabled when tracepoint i2c_transfer gets
2234 * enabled. This is an efficient way of keeping the for-loop from
2235 * being executed when not needed.
2236 */
2237 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2238 int i;
2239 for (i = 0; i < num; i++)
2240 if (msgs[i].flags & I2C_M_RD)
2241 trace_i2c_read(adap, &msgs[i], i);
2242 else
2243 trace_i2c_write(adap, &msgs[i], i);
2244 }
2245
2246 /* Retry automatically on arbitration loss */
2247 orig_jiffies = jiffies;
2248 for (ret = 0, try = 0; try <= adap->retries; try++) {
2249 if (i2c_in_atomic_xfer_mode() && adap->algo->master_xfer_atomic)
2250 ret = adap->algo->master_xfer_atomic(adap, msgs, num);
2251 else
2252 ret = adap->algo->master_xfer(adap, msgs, num);
2253
2254 if (ret != -EAGAIN)
2255 break;
2256 if (time_after(jiffies, orig_jiffies + adap->timeout))
2257 break;
2258 }
2259
2260 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2261 int i;
2262 for (i = 0; i < ret; i++)
2263 if (msgs[i].flags & I2C_M_RD)
2264 trace_i2c_reply(adap, &msgs[i], i);
2265 trace_i2c_result(adap, num, ret);
2266 }
2267
2268 return ret;
2269}
2270EXPORT_SYMBOL(__i2c_transfer);
2271
2272/**
2273 * i2c_transfer - execute a single or combined I2C message
2274 * @adap: Handle to I2C bus
2275 * @msgs: One or more messages to execute before STOP is issued to
2276 * terminate the operation; each message begins with a START.
2277 * @num: Number of messages to be executed.
2278 *
2279 * Returns negative errno, else the number of messages executed.
2280 *
2281 * Note that there is no requirement that each message be sent to
2282 * the same slave address, although that is the most common model.
2283 */
2284int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2285{
2286 int ret;
2287
2288 /* REVISIT the fault reporting model here is weak:
2289 *
2290 * - When we get an error after receiving N bytes from a slave,
2291 * there is no way to report "N".
2292 *
2293 * - When we get a NAK after transmitting N bytes to a slave,
2294 * there is no way to report "N" ... or to let the master
2295 * continue executing the rest of this combined message, if
2296 * that's the appropriate response.
2297 *
2298 * - When for example "num" is two and we successfully complete
2299 * the first message but get an error part way through the
2300 * second, it's unclear whether that should be reported as
2301 * one (discarding status on the second message) or errno
2302 * (discarding status on the first one).
2303 */
2304 ret = __i2c_lock_bus_helper(adap);
2305 if (ret)
2306 return ret;
2307
2308 ret = __i2c_transfer(adap, msgs, num);
2309 i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
2310
2311 return ret;
2312}
2313EXPORT_SYMBOL(i2c_transfer);
2314
2315/**
2316 * i2c_transfer_buffer_flags - issue a single I2C message transferring data
2317 * to/from a buffer
2318 * @client: Handle to slave device
2319 * @buf: Where the data is stored
2320 * @count: How many bytes to transfer, must be less than 64k since msg.len is u16
2321 * @flags: The flags to be used for the message, e.g. I2C_M_RD for reads
2322 *
2323 * Returns negative errno, or else the number of bytes transferred.
2324 */
2325int i2c_transfer_buffer_flags(const struct i2c_client *client, char *buf,
2326 int count, u16 flags)
2327{
2328 int ret;
2329 struct i2c_msg msg = {
2330 .addr = client->addr,
2331 .flags = flags | (client->flags & I2C_M_TEN),
2332 .len = count,
2333 .buf = buf,
2334 };
2335
2336 ret = i2c_transfer(client->adapter, &msg, 1);
2337
2338 /*
2339 * If everything went ok (i.e. 1 msg transferred), return #bytes
2340 * transferred, else error code.
2341 */
2342 return (ret == 1) ? count : ret;
2343}
2344EXPORT_SYMBOL(i2c_transfer_buffer_flags);
2345
2346/**
2347 * i2c_get_device_id - get manufacturer, part id and die revision of a device
2348 * @client: The device to query
2349 * @id: The queried information
2350 *
2351 * Returns negative errno on error, zero on success.
2352 */
2353int i2c_get_device_id(const struct i2c_client *client,
2354 struct i2c_device_identity *id)
2355{
2356 struct i2c_adapter *adap = client->adapter;
2357 union i2c_smbus_data raw_id;
2358 int ret;
2359
2360 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
2361 return -EOPNOTSUPP;
2362
2363 raw_id.block[0] = 3;
2364 ret = i2c_smbus_xfer(adap, I2C_ADDR_DEVICE_ID, 0,
2365 I2C_SMBUS_READ, client->addr << 1,
2366 I2C_SMBUS_I2C_BLOCK_DATA, &raw_id);
2367 if (ret)
2368 return ret;
2369
2370 id->manufacturer_id = (raw_id.block[1] << 4) | (raw_id.block[2] >> 4);
2371 id->part_id = ((raw_id.block[2] & 0xf) << 5) | (raw_id.block[3] >> 3);
2372 id->die_revision = raw_id.block[3] & 0x7;
2373 return 0;
2374}
2375EXPORT_SYMBOL_GPL(i2c_get_device_id);
2376
2377/**
2378 * i2c_client_get_device_id - get the driver match table entry of a device
2379 * @client: the device to query. The device must be bound to a driver
2380 *
2381 * Returns a pointer to the matching entry if found, NULL otherwise.
2382 */
2383const struct i2c_device_id *i2c_client_get_device_id(const struct i2c_client *client)
2384{
2385 const struct i2c_driver *drv = to_i2c_driver(client->dev.driver);
2386
2387 return i2c_match_id(drv->id_table, client);
2388}
2389EXPORT_SYMBOL_GPL(i2c_client_get_device_id);
2390
2391/* ----------------------------------------------------
2392 * the i2c address scanning function
2393 * Will not work for 10-bit addresses!
2394 * ----------------------------------------------------
2395 */
2396
2397/*
2398 * Legacy default probe function, mostly relevant for SMBus. The default
2399 * probe method is a quick write, but it is known to corrupt the 24RF08
2400 * EEPROMs due to a state machine bug, and could also irreversibly
2401 * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
2402 * we use a short byte read instead. Also, some bus drivers don't implement
2403 * quick write, so we fallback to a byte read in that case too.
2404 * On x86, there is another special case for FSC hardware monitoring chips,
2405 * which want regular byte reads (address 0x73.) Fortunately, these are the
2406 * only known chips using this I2C address on PC hardware.
2407 * Returns 1 if probe succeeded, 0 if not.
2408 */
2409static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
2410{
2411 int err;
2412 union i2c_smbus_data dummy;
2413
2414#ifdef CONFIG_X86
2415 if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
2416 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
2417 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2418 I2C_SMBUS_BYTE_DATA, &dummy);
2419 else
2420#endif
2421 if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
2422 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
2423 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
2424 I2C_SMBUS_QUICK, NULL);
2425 else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
2426 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2427 I2C_SMBUS_BYTE, &dummy);
2428 else {
2429 dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
2430 addr);
2431 err = -EOPNOTSUPP;
2432 }
2433
2434 return err >= 0;
2435}
2436
2437static int i2c_detect_address(struct i2c_client *temp_client,
2438 struct i2c_driver *driver)
2439{
2440 struct i2c_board_info info;
2441 struct i2c_adapter *adapter = temp_client->adapter;
2442 int addr = temp_client->addr;
2443 int err;
2444
2445 /* Make sure the address is valid */
2446 err = i2c_check_7bit_addr_validity_strict(addr);
2447 if (err) {
2448 dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
2449 addr);
2450 return err;
2451 }
2452
2453 /* Skip if already in use (7 bit, no need to encode flags) */
2454 if (i2c_check_addr_busy(adapter, addr))
2455 return 0;
2456
2457 /* Make sure there is something at this address */
2458 if (!i2c_default_probe(adapter, addr))
2459 return 0;
2460
2461 /* Finally call the custom detection function */
2462 memset(&info, 0, sizeof(struct i2c_board_info));
2463 info.addr = addr;
2464 err = driver->detect(temp_client, &info);
2465 if (err) {
2466 /* -ENODEV is returned if the detection fails. We catch it
2467 here as this isn't an error. */
2468 return err == -ENODEV ? 0 : err;
2469 }
2470
2471 /* Consistency check */
2472 if (info.type[0] == '\0') {
2473 dev_err(&adapter->dev,
2474 "%s detection function provided no name for 0x%x\n",
2475 driver->driver.name, addr);
2476 } else {
2477 struct i2c_client *client;
2478
2479 /* Detection succeeded, instantiate the device */
2480 if (adapter->class & I2C_CLASS_DEPRECATED)
2481 dev_warn(&adapter->dev,
2482 "This adapter will soon drop class based instantiation of devices. "
2483 "Please make sure client 0x%02x gets instantiated by other means. "
2484 "Check 'Documentation/i2c/instantiating-devices.rst' for details.\n",
2485 info.addr);
2486
2487 dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
2488 info.type, info.addr);
2489 client = i2c_new_client_device(adapter, &info);
2490 if (!IS_ERR(client))
2491 list_add_tail(&client->detected, &driver->clients);
2492 else
2493 dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
2494 info.type, info.addr);
2495 }
2496 return 0;
2497}
2498
2499static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
2500{
2501 const unsigned short *address_list;
2502 struct i2c_client *temp_client;
2503 int i, err = 0;
2504
2505 address_list = driver->address_list;
2506 if (!driver->detect || !address_list)
2507 return 0;
2508
2509 /* Warn that the adapter lost class based instantiation */
2510 if (adapter->class == I2C_CLASS_DEPRECATED) {
2511 dev_dbg(&adapter->dev,
2512 "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
2513 "If you need it, check 'Documentation/i2c/instantiating-devices.rst' for alternatives.\n",
2514 driver->driver.name);
2515 return 0;
2516 }
2517
2518 /* Stop here if the classes do not match */
2519 if (!(adapter->class & driver->class))
2520 return 0;
2521
2522 /* Set up a temporary client to help detect callback */
2523 temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
2524 if (!temp_client)
2525 return -ENOMEM;
2526 temp_client->adapter = adapter;
2527
2528 for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
2529 dev_dbg(&adapter->dev,
2530 "found normal entry for adapter %d, addr 0x%02x\n",
2531 i2c_adapter_id(adapter), address_list[i]);
2532 temp_client->addr = address_list[i];
2533 err = i2c_detect_address(temp_client, driver);
2534 if (unlikely(err))
2535 break;
2536 }
2537
2538 kfree(temp_client);
2539 return err;
2540}
2541
2542int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
2543{
2544 return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2545 I2C_SMBUS_QUICK, NULL) >= 0;
2546}
2547EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
2548
2549struct i2c_client *
2550i2c_new_scanned_device(struct i2c_adapter *adap,
2551 struct i2c_board_info *info,
2552 unsigned short const *addr_list,
2553 int (*probe)(struct i2c_adapter *adap, unsigned short addr))
2554{
2555 int i;
2556
2557 if (!probe)
2558 probe = i2c_default_probe;
2559
2560 for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
2561 /* Check address validity */
2562 if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
2563 dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
2564 addr_list[i]);
2565 continue;
2566 }
2567
2568 /* Check address availability (7 bit, no need to encode flags) */
2569 if (i2c_check_addr_busy(adap, addr_list[i])) {
2570 dev_dbg(&adap->dev,
2571 "Address 0x%02x already in use, not probing\n",
2572 addr_list[i]);
2573 continue;
2574 }
2575
2576 /* Test address responsiveness */
2577 if (probe(adap, addr_list[i]))
2578 break;
2579 }
2580
2581 if (addr_list[i] == I2C_CLIENT_END) {
2582 dev_dbg(&adap->dev, "Probing failed, no device found\n");
2583 return ERR_PTR(-ENODEV);
2584 }
2585
2586 info->addr = addr_list[i];
2587 return i2c_new_client_device(adap, info);
2588}
2589EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
2590
2591struct i2c_adapter *i2c_get_adapter(int nr)
2592{
2593 struct i2c_adapter *adapter;
2594
2595 mutex_lock(&core_lock);
2596 adapter = idr_find(&i2c_adapter_idr, nr);
2597 if (!adapter)
2598 goto exit;
2599
2600 if (try_module_get(adapter->owner))
2601 get_device(&adapter->dev);
2602 else
2603 adapter = NULL;
2604
2605 exit:
2606 mutex_unlock(&core_lock);
2607 return adapter;
2608}
2609EXPORT_SYMBOL(i2c_get_adapter);
2610
2611void i2c_put_adapter(struct i2c_adapter *adap)
2612{
2613 if (!adap)
2614 return;
2615
2616 module_put(adap->owner);
2617 /* Should be last, otherwise we risk use-after-free with 'adap' */
2618 put_device(&adap->dev);
2619}
2620EXPORT_SYMBOL(i2c_put_adapter);
2621
2622/**
2623 * i2c_get_dma_safe_msg_buf() - get a DMA safe buffer for the given i2c_msg
2624 * @msg: the message to be checked
2625 * @threshold: the minimum number of bytes for which using DMA makes sense.
2626 * Should at least be 1.
2627 *
2628 * Return: NULL if a DMA safe buffer was not obtained. Use msg->buf with PIO.
2629 * Or a valid pointer to be used with DMA. After use, release it by
2630 * calling i2c_put_dma_safe_msg_buf().
2631 *
2632 * This function must only be called from process context!
2633 */
2634u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold)
2635{
2636 /* also skip 0-length msgs for bogus thresholds of 0 */
2637 if (!threshold)
2638 pr_debug("DMA buffer for addr=0x%02x with length 0 is bogus\n",
2639 msg->addr);
2640 if (msg->len < threshold || msg->len == 0)
2641 return NULL;
2642
2643 if (msg->flags & I2C_M_DMA_SAFE)
2644 return msg->buf;
2645
2646 pr_debug("using bounce buffer for addr=0x%02x, len=%d\n",
2647 msg->addr, msg->len);
2648
2649 if (msg->flags & I2C_M_RD)
2650 return kzalloc(msg->len, GFP_KERNEL);
2651 else
2652 return kmemdup(msg->buf, msg->len, GFP_KERNEL);
2653}
2654EXPORT_SYMBOL_GPL(i2c_get_dma_safe_msg_buf);
2655
2656/**
2657 * i2c_put_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg
2658 * @buf: the buffer obtained from i2c_get_dma_safe_msg_buf(). May be NULL.
2659 * @msg: the message which the buffer corresponds to
2660 * @xferred: bool saying if the message was transferred
2661 */
2662void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred)
2663{
2664 if (!buf || buf == msg->buf)
2665 return;
2666
2667 if (xferred && msg->flags & I2C_M_RD)
2668 memcpy(msg->buf, buf, msg->len);
2669
2670 kfree(buf);
2671}
2672EXPORT_SYMBOL_GPL(i2c_put_dma_safe_msg_buf);
2673
2674MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
2675MODULE_DESCRIPTION("I2C-Bus main module");
2676MODULE_LICENSE("GPL");