Loading...
Note: File does not exist in v4.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DRM driver for Ilitek ILI9225 panels
4 *
5 * Copyright 2017 David Lechner <david@lechnology.com>
6 *
7 * Some code copied from mipi-dbi.c
8 * Copyright 2016 Noralf Trønnes
9 */
10
11#include <linux/delay.h>
12#include <linux/dma-buf.h>
13#include <linux/gpio/consumer.h>
14#include <linux/module.h>
15#include <linux/property.h>
16#include <linux/spi/spi.h>
17#include <video/mipi_display.h>
18
19#include <drm/drm_atomic_helper.h>
20#include <drm/drm_client_setup.h>
21#include <drm/drm_damage_helper.h>
22#include <drm/drm_drv.h>
23#include <drm/drm_fb_dma_helper.h>
24#include <drm/drm_fbdev_dma.h>
25#include <drm/drm_fourcc.h>
26#include <drm/drm_framebuffer.h>
27#include <drm/drm_gem_atomic_helper.h>
28#include <drm/drm_gem_dma_helper.h>
29#include <drm/drm_gem_framebuffer_helper.h>
30#include <drm/drm_managed.h>
31#include <drm/drm_mipi_dbi.h>
32#include <drm/drm_rect.h>
33
34#define ILI9225_DRIVER_READ_CODE 0x00
35#define ILI9225_DRIVER_OUTPUT_CONTROL 0x01
36#define ILI9225_LCD_AC_DRIVING_CONTROL 0x02
37#define ILI9225_ENTRY_MODE 0x03
38#define ILI9225_DISPLAY_CONTROL_1 0x07
39#define ILI9225_BLANK_PERIOD_CONTROL_1 0x08
40#define ILI9225_FRAME_CYCLE_CONTROL 0x0b
41#define ILI9225_INTERFACE_CONTROL 0x0c
42#define ILI9225_OSCILLATION_CONTROL 0x0f
43#define ILI9225_POWER_CONTROL_1 0x10
44#define ILI9225_POWER_CONTROL_2 0x11
45#define ILI9225_POWER_CONTROL_3 0x12
46#define ILI9225_POWER_CONTROL_4 0x13
47#define ILI9225_POWER_CONTROL_5 0x14
48#define ILI9225_VCI_RECYCLING 0x15
49#define ILI9225_RAM_ADDRESS_SET_1 0x20
50#define ILI9225_RAM_ADDRESS_SET_2 0x21
51#define ILI9225_WRITE_DATA_TO_GRAM 0x22
52#define ILI9225_SOFTWARE_RESET 0x28
53#define ILI9225_GATE_SCAN_CONTROL 0x30
54#define ILI9225_VERTICAL_SCROLL_1 0x31
55#define ILI9225_VERTICAL_SCROLL_2 0x32
56#define ILI9225_VERTICAL_SCROLL_3 0x33
57#define ILI9225_PARTIAL_DRIVING_POS_1 0x34
58#define ILI9225_PARTIAL_DRIVING_POS_2 0x35
59#define ILI9225_HORIZ_WINDOW_ADDR_1 0x36
60#define ILI9225_HORIZ_WINDOW_ADDR_2 0x37
61#define ILI9225_VERT_WINDOW_ADDR_1 0x38
62#define ILI9225_VERT_WINDOW_ADDR_2 0x39
63#define ILI9225_GAMMA_CONTROL_1 0x50
64#define ILI9225_GAMMA_CONTROL_2 0x51
65#define ILI9225_GAMMA_CONTROL_3 0x52
66#define ILI9225_GAMMA_CONTROL_4 0x53
67#define ILI9225_GAMMA_CONTROL_5 0x54
68#define ILI9225_GAMMA_CONTROL_6 0x55
69#define ILI9225_GAMMA_CONTROL_7 0x56
70#define ILI9225_GAMMA_CONTROL_8 0x57
71#define ILI9225_GAMMA_CONTROL_9 0x58
72#define ILI9225_GAMMA_CONTROL_10 0x59
73
74static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data)
75{
76 u8 par[2] = { data >> 8, data & 0xff };
77
78 return mipi_dbi_command_buf(dbi, cmd, par, 2);
79}
80
81static void ili9225_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb,
82 struct drm_rect *rect, struct drm_format_conv_state *fmtcnv_state)
83{
84 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
85 unsigned int height = rect->y2 - rect->y1;
86 unsigned int width = rect->x2 - rect->x1;
87 struct mipi_dbi *dbi = &dbidev->dbi;
88 bool swap = dbi->swap_bytes;
89 u16 x_start, y_start;
90 u16 x1, x2, y1, y2;
91 int ret = 0;
92 bool full;
93 void *tr;
94
95 full = width == fb->width && height == fb->height;
96
97 DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
98
99 if (!dbi->dc || !full || swap ||
100 fb->format->format == DRM_FORMAT_XRGB8888) {
101 tr = dbidev->tx_buf;
102 ret = mipi_dbi_buf_copy(tr, src, fb, rect, swap, fmtcnv_state);
103 if (ret)
104 goto err_msg;
105 } else {
106 tr = src->vaddr; /* TODO: Use mapping abstraction properly */
107 }
108
109 switch (dbidev->rotation) {
110 default:
111 x1 = rect->x1;
112 x2 = rect->x2 - 1;
113 y1 = rect->y1;
114 y2 = rect->y2 - 1;
115 x_start = x1;
116 y_start = y1;
117 break;
118 case 90:
119 x1 = rect->y1;
120 x2 = rect->y2 - 1;
121 y1 = fb->width - rect->x2;
122 y2 = fb->width - rect->x1 - 1;
123 x_start = x1;
124 y_start = y2;
125 break;
126 case 180:
127 x1 = fb->width - rect->x2;
128 x2 = fb->width - rect->x1 - 1;
129 y1 = fb->height - rect->y2;
130 y2 = fb->height - rect->y1 - 1;
131 x_start = x2;
132 y_start = y2;
133 break;
134 case 270:
135 x1 = fb->height - rect->y2;
136 x2 = fb->height - rect->y1 - 1;
137 y1 = rect->x1;
138 y2 = rect->x2 - 1;
139 x_start = x2;
140 y_start = y1;
141 break;
142 }
143
144 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2);
145 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1);
146 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2);
147 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1);
148
149 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start);
150 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start);
151
152 ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr,
153 width * height * 2);
154err_msg:
155 if (ret)
156 dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
157}
158
159static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
160 struct drm_plane_state *old_state)
161{
162 struct drm_plane_state *state = pipe->plane.state;
163 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
164 struct drm_framebuffer *fb = state->fb;
165 struct drm_rect rect;
166 int idx;
167
168 if (!pipe->crtc.state->active)
169 return;
170
171 if (!drm_dev_enter(fb->dev, &idx))
172 return;
173
174 if (drm_atomic_helper_damage_merged(old_state, state, &rect))
175 ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect,
176 &shadow_plane_state->fmtcnv_state);
177
178 drm_dev_exit(idx);
179}
180
181static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
182 struct drm_crtc_state *crtc_state,
183 struct drm_plane_state *plane_state)
184{
185 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
186 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
187 struct drm_framebuffer *fb = plane_state->fb;
188 struct device *dev = pipe->crtc.dev->dev;
189 struct mipi_dbi *dbi = &dbidev->dbi;
190 struct drm_rect rect = {
191 .x1 = 0,
192 .x2 = fb->width,
193 .y1 = 0,
194 .y2 = fb->height,
195 };
196 int ret, idx;
197 u8 am_id;
198
199 if (!drm_dev_enter(pipe->crtc.dev, &idx))
200 return;
201
202 DRM_DEBUG_KMS("\n");
203
204 mipi_dbi_hw_reset(dbi);
205
206 /*
207 * There don't seem to be two example init sequences that match, so
208 * using the one from the popular Arduino library for this display.
209 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp
210 */
211
212 ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000);
213 if (ret) {
214 DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
215 goto out_exit;
216 }
217 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000);
218 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000);
219 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000);
220 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000);
221
222 msleep(40);
223
224 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018);
225 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121);
226 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f);
227 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f);
228 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800);
229
230 msleep(10);
231
232 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b);
233
234 msleep(50);
235
236 switch (dbidev->rotation) {
237 default:
238 am_id = 0x30;
239 break;
240 case 90:
241 am_id = 0x18;
242 break;
243 case 180:
244 am_id = 0x00;
245 break;
246 case 270:
247 am_id = 0x28;
248 break;
249 }
250 ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c);
251 ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100);
252 ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id);
253 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
254 ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808);
255 ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100);
256 ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000);
257 ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01);
258 ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020);
259 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000);
260 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000);
261
262 ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000);
263 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db);
264 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000);
265 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000);
266 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db);
267 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000);
268
269 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000);
270 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808);
271 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a);
272 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a);
273 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08);
274 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808);
275 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000);
276 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00);
277 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710);
278 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710);
279
280 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012);
281
282 msleep(50);
283
284 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017);
285
286 ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect,
287 &shadow_plane_state->fmtcnv_state);
288
289out_exit:
290 drm_dev_exit(idx);
291}
292
293static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
294{
295 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
296 struct mipi_dbi *dbi = &dbidev->dbi;
297
298 DRM_DEBUG_KMS("\n");
299
300 /*
301 * This callback is not protected by drm_dev_enter/exit since we want to
302 * turn off the display on regular driver unload. It's highly unlikely
303 * that the underlying SPI controller is gone should this be called after
304 * unplug.
305 */
306
307 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
308 msleep(50);
309 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007);
310 msleep(50);
311 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02);
312}
313
314static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par,
315 size_t num)
316{
317 struct spi_device *spi = dbi->spi;
318 unsigned int bpw = 8;
319 u32 speed_hz;
320 int ret;
321
322 spi_bus_lock(spi->controller);
323 gpiod_set_value_cansleep(dbi->dc, 0);
324 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
325 ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1);
326 spi_bus_unlock(spi->controller);
327 if (ret || !num)
328 return ret;
329
330 if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes)
331 bpw = 16;
332
333 spi_bus_lock(spi->controller);
334 gpiod_set_value_cansleep(dbi->dc, 1);
335 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
336 ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num);
337 spi_bus_unlock(spi->controller);
338
339 return ret;
340}
341
342static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = {
343 .mode_valid = mipi_dbi_pipe_mode_valid,
344 .enable = ili9225_pipe_enable,
345 .disable = ili9225_pipe_disable,
346 .update = ili9225_pipe_update,
347 .begin_fb_access = mipi_dbi_pipe_begin_fb_access,
348 .end_fb_access = mipi_dbi_pipe_end_fb_access,
349 .reset_plane = mipi_dbi_pipe_reset_plane,
350 .duplicate_plane_state = mipi_dbi_pipe_duplicate_plane_state,
351 .destroy_plane_state = mipi_dbi_pipe_destroy_plane_state,
352};
353
354static const struct drm_display_mode ili9225_mode = {
355 DRM_SIMPLE_MODE(176, 220, 35, 44),
356};
357
358DEFINE_DRM_GEM_DMA_FOPS(ili9225_fops);
359
360static const struct drm_driver ili9225_driver = {
361 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
362 .fops = &ili9225_fops,
363 DRM_GEM_DMA_DRIVER_OPS_VMAP,
364 DRM_FBDEV_DMA_DRIVER_OPS,
365 .name = "ili9225",
366 .desc = "Ilitek ILI9225",
367 .date = "20171106",
368 .major = 1,
369 .minor = 0,
370};
371
372static const struct of_device_id ili9225_of_match[] = {
373 { .compatible = "vot,v220hf01a-t" },
374 {},
375};
376MODULE_DEVICE_TABLE(of, ili9225_of_match);
377
378static const struct spi_device_id ili9225_id[] = {
379 { "v220hf01a-t", 0 },
380 { },
381};
382MODULE_DEVICE_TABLE(spi, ili9225_id);
383
384static int ili9225_probe(struct spi_device *spi)
385{
386 struct device *dev = &spi->dev;
387 struct mipi_dbi_dev *dbidev;
388 struct drm_device *drm;
389 struct mipi_dbi *dbi;
390 struct gpio_desc *rs;
391 u32 rotation = 0;
392 int ret;
393
394 dbidev = devm_drm_dev_alloc(dev, &ili9225_driver,
395 struct mipi_dbi_dev, drm);
396 if (IS_ERR(dbidev))
397 return PTR_ERR(dbidev);
398
399 dbi = &dbidev->dbi;
400 drm = &dbidev->drm;
401
402 dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
403 if (IS_ERR(dbi->reset))
404 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
405
406 rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW);
407 if (IS_ERR(rs))
408 return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n");
409
410 device_property_read_u32(dev, "rotation", &rotation);
411
412 ret = mipi_dbi_spi_init(spi, dbi, rs);
413 if (ret)
414 return ret;
415
416 /* override the command function set in mipi_dbi_spi_init() */
417 dbi->command = ili9225_dbi_command;
418
419 ret = mipi_dbi_dev_init(dbidev, &ili9225_pipe_funcs, &ili9225_mode, rotation);
420 if (ret)
421 return ret;
422
423 drm_mode_config_reset(drm);
424
425 ret = drm_dev_register(drm, 0);
426 if (ret)
427 return ret;
428
429 spi_set_drvdata(spi, drm);
430
431 drm_client_setup(drm, NULL);
432
433 return 0;
434}
435
436static void ili9225_remove(struct spi_device *spi)
437{
438 struct drm_device *drm = spi_get_drvdata(spi);
439
440 drm_dev_unplug(drm);
441 drm_atomic_helper_shutdown(drm);
442}
443
444static void ili9225_shutdown(struct spi_device *spi)
445{
446 drm_atomic_helper_shutdown(spi_get_drvdata(spi));
447}
448
449static struct spi_driver ili9225_spi_driver = {
450 .driver = {
451 .name = "ili9225",
452 .of_match_table = ili9225_of_match,
453 },
454 .id_table = ili9225_id,
455 .probe = ili9225_probe,
456 .remove = ili9225_remove,
457 .shutdown = ili9225_shutdown,
458};
459module_spi_driver(ili9225_spi_driver);
460
461MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver");
462MODULE_AUTHOR("David Lechner <david@lechnology.com>");
463MODULE_LICENSE("GPL");