Loading...
1/*
2 * USB HandSpring Visor, Palm m50x, and Sony Clie driver
3 * (supports all of the Palm OS USB devices)
4 *
5 * Copyright (C) 1999 - 2004
6 * Greg Kroah-Hartman (greg@kroah.com)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License version
10 * 2 as published by the Free Software Foundation.
11 *
12 * See Documentation/usb/usb-serial.txt for more information on using this
13 * driver
14 *
15 */
16
17#include <linux/kernel.h>
18#include <linux/errno.h>
19#include <linux/slab.h>
20#include <linux/tty.h>
21#include <linux/tty_driver.h>
22#include <linux/tty_flip.h>
23#include <linux/module.h>
24#include <linux/moduleparam.h>
25#include <linux/spinlock.h>
26#include <linux/uaccess.h>
27#include <linux/usb.h>
28#include <linux/usb/serial.h>
29#include <linux/usb/cdc.h>
30#include "visor.h"
31
32/*
33 * Version Information
34 */
35#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
36#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
37
38/* function prototypes for a handspring visor */
39static int visor_open(struct tty_struct *tty, struct usb_serial_port *port);
40static void visor_close(struct usb_serial_port *port);
41static int visor_probe(struct usb_serial *serial,
42 const struct usb_device_id *id);
43static int visor_calc_num_ports(struct usb_serial *serial);
44static void visor_read_int_callback(struct urb *urb);
45static int clie_3_5_startup(struct usb_serial *serial);
46static int treo_attach(struct usb_serial *serial);
47static int clie_5_attach(struct usb_serial *serial);
48static int palm_os_3_probe(struct usb_serial *serial,
49 const struct usb_device_id *id);
50static int palm_os_4_probe(struct usb_serial *serial,
51 const struct usb_device_id *id);
52
53static const struct usb_device_id id_table[] = {
54 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
55 .driver_info = (kernel_ulong_t)&palm_os_3_probe },
56 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID),
57 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
58 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
59 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
60 { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
61 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
62 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
63 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
64 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
65 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
66 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID),
67 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
68 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID),
69 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
70 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID),
71 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
72 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID),
73 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
74 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID),
75 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
76 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
77 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
78 { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650),
79 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
80 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
81 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
82 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
83 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
84 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
85 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
86 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID),
87 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
88 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID),
89 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
90 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID),
91 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
92 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
93 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
94 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
95 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
96 { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
97 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
98 { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff),
99 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
100 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
101 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
102 { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
103 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
104 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
105 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
106 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
107 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
108 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
109 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
110 { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
111 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
112 { } /* Terminating entry */
113};
114
115static const struct usb_device_id clie_id_5_table[] = {
116 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
117 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
118 { } /* Terminating entry */
119};
120
121static const struct usb_device_id clie_id_3_5_table[] = {
122 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
123 { } /* Terminating entry */
124};
125
126static const struct usb_device_id id_table_combined[] = {
127 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
128 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
129 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
130 { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
131 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
132 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
133 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
134 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
135 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) },
136 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
137 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
138 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
139 { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
140 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
141 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
142 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
143 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
144 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
145 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
146 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
147 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
148 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) },
149 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
150 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
151 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
152 { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) },
153 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
154 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
155 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
156 { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
157 { } /* Terminating entry */
158};
159
160MODULE_DEVICE_TABLE(usb, id_table_combined);
161
162/* All of the device info needed for the Handspring Visor,
163 and Palm 4.0 devices */
164static struct usb_serial_driver handspring_device = {
165 .driver = {
166 .owner = THIS_MODULE,
167 .name = "visor",
168 },
169 .description = "Handspring Visor / Palm OS",
170 .id_table = id_table,
171 .num_ports = 2,
172 .bulk_out_size = 256,
173 .open = visor_open,
174 .close = visor_close,
175 .throttle = usb_serial_generic_throttle,
176 .unthrottle = usb_serial_generic_unthrottle,
177 .attach = treo_attach,
178 .probe = visor_probe,
179 .calc_num_ports = visor_calc_num_ports,
180 .read_int_callback = visor_read_int_callback,
181};
182
183/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
184static struct usb_serial_driver clie_5_device = {
185 .driver = {
186 .owner = THIS_MODULE,
187 .name = "clie_5",
188 },
189 .description = "Sony Clie 5.0",
190 .id_table = clie_id_5_table,
191 .num_ports = 2,
192 .bulk_out_size = 256,
193 .open = visor_open,
194 .close = visor_close,
195 .throttle = usb_serial_generic_throttle,
196 .unthrottle = usb_serial_generic_unthrottle,
197 .attach = clie_5_attach,
198 .probe = visor_probe,
199 .calc_num_ports = visor_calc_num_ports,
200 .read_int_callback = visor_read_int_callback,
201};
202
203/* device info for the Sony Clie OS version 3.5 */
204static struct usb_serial_driver clie_3_5_device = {
205 .driver = {
206 .owner = THIS_MODULE,
207 .name = "clie_3.5",
208 },
209 .description = "Sony Clie 3.5",
210 .id_table = clie_id_3_5_table,
211 .num_ports = 1,
212 .bulk_out_size = 256,
213 .open = visor_open,
214 .close = visor_close,
215 .throttle = usb_serial_generic_throttle,
216 .unthrottle = usb_serial_generic_unthrottle,
217 .attach = clie_3_5_startup,
218};
219
220static struct usb_serial_driver * const serial_drivers[] = {
221 &handspring_device, &clie_5_device, &clie_3_5_device, NULL
222};
223
224/******************************************************************************
225 * Handspring Visor specific driver functions
226 ******************************************************************************/
227static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
228{
229 int result = 0;
230
231 if (!port->read_urb) {
232 /* this is needed for some brain dead Sony devices */
233 dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
234 return -ENODEV;
235 }
236
237 /* Start reading from the device */
238 result = usb_serial_generic_open(tty, port);
239 if (result)
240 goto exit;
241
242 if (port->interrupt_in_urb) {
243 dev_dbg(&port->dev, "adding interrupt input for treo\n");
244 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
245 if (result)
246 dev_err(&port->dev,
247 "%s - failed submitting interrupt urb, error %d\n",
248 __func__, result);
249 }
250exit:
251 return result;
252}
253
254
255static void visor_close(struct usb_serial_port *port)
256{
257 unsigned char *transfer_buffer;
258
259 usb_serial_generic_close(port);
260 usb_kill_urb(port->interrupt_in_urb);
261
262 transfer_buffer = kmalloc(0x12, GFP_KERNEL);
263 if (!transfer_buffer)
264 return;
265 usb_control_msg(port->serial->dev,
266 usb_rcvctrlpipe(port->serial->dev, 0),
267 VISOR_CLOSE_NOTIFICATION, 0xc2,
268 0x0000, 0x0000,
269 transfer_buffer, 0x12, 300);
270 kfree(transfer_buffer);
271}
272
273static void visor_read_int_callback(struct urb *urb)
274{
275 struct usb_serial_port *port = urb->context;
276 int status = urb->status;
277 int result;
278
279 switch (status) {
280 case 0:
281 /* success */
282 break;
283 case -ECONNRESET:
284 case -ENOENT:
285 case -ESHUTDOWN:
286 /* this urb is terminated, clean up */
287 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
288 __func__, status);
289 return;
290 default:
291 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
292 __func__, status);
293 goto exit;
294 }
295
296 /*
297 * This information is still unknown what it can be used for.
298 * If anyone has an idea, please let the author know...
299 *
300 * Rumor has it this endpoint is used to notify when data
301 * is ready to be read from the bulk ones.
302 */
303 usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
304 urb->transfer_buffer);
305
306exit:
307 result = usb_submit_urb(urb, GFP_ATOMIC);
308 if (result)
309 dev_err(&urb->dev->dev,
310 "%s - Error %d submitting interrupt urb\n",
311 __func__, result);
312}
313
314static int palm_os_3_probe(struct usb_serial *serial,
315 const struct usb_device_id *id)
316{
317 struct device *dev = &serial->dev->dev;
318 struct visor_connection_info *connection_info;
319 unsigned char *transfer_buffer;
320 char *string;
321 int retval = 0;
322 int i;
323 int num_ports = 0;
324
325 transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
326 if (!transfer_buffer)
327 return -ENOMEM;
328
329 /* send a get connection info request */
330 retval = usb_control_msg(serial->dev,
331 usb_rcvctrlpipe(serial->dev, 0),
332 VISOR_GET_CONNECTION_INFORMATION,
333 0xc2, 0x0000, 0x0000, transfer_buffer,
334 sizeof(*connection_info), 300);
335 if (retval < 0) {
336 dev_err(dev, "%s - error %d getting connection information\n",
337 __func__, retval);
338 goto exit;
339 }
340
341 if (retval == sizeof(*connection_info)) {
342 connection_info = (struct visor_connection_info *)
343 transfer_buffer;
344
345 num_ports = le16_to_cpu(connection_info->num_ports);
346 for (i = 0; i < num_ports; ++i) {
347 switch (
348 connection_info->connections[i].port_function_id) {
349 case VISOR_FUNCTION_GENERIC:
350 string = "Generic";
351 break;
352 case VISOR_FUNCTION_DEBUGGER:
353 string = "Debugger";
354 break;
355 case VISOR_FUNCTION_HOTSYNC:
356 string = "HotSync";
357 break;
358 case VISOR_FUNCTION_CONSOLE:
359 string = "Console";
360 break;
361 case VISOR_FUNCTION_REMOTE_FILE_SYS:
362 string = "Remote File System";
363 break;
364 default:
365 string = "unknown";
366 break;
367 }
368 dev_info(dev, "%s: port %d, is for %s use\n",
369 serial->type->description,
370 connection_info->connections[i].port, string);
371 }
372 }
373 /*
374 * Handle devices that report invalid stuff here.
375 */
376 if (num_ports == 0 || num_ports > 2) {
377 dev_warn(dev, "%s: No valid connect info available\n",
378 serial->type->description);
379 num_ports = 2;
380 }
381
382 dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
383 num_ports);
384
385 /*
386 * save off our num_ports info so that we can use it in the
387 * calc_num_ports callback
388 */
389 usb_set_serial_data(serial, (void *)(long)num_ports);
390
391 /* ask for the number of bytes available, but ignore the
392 response as it is broken */
393 retval = usb_control_msg(serial->dev,
394 usb_rcvctrlpipe(serial->dev, 0),
395 VISOR_REQUEST_BYTES_AVAILABLE,
396 0xc2, 0x0000, 0x0005, transfer_buffer,
397 0x02, 300);
398 if (retval < 0)
399 dev_err(dev, "%s - error %d getting bytes available request\n",
400 __func__, retval);
401 retval = 0;
402
403exit:
404 kfree(transfer_buffer);
405
406 return retval;
407}
408
409static int palm_os_4_probe(struct usb_serial *serial,
410 const struct usb_device_id *id)
411{
412 struct device *dev = &serial->dev->dev;
413 struct palm_ext_connection_info *connection_info;
414 unsigned char *transfer_buffer;
415 int retval;
416
417 transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
418 if (!transfer_buffer)
419 return -ENOMEM;
420
421 retval = usb_control_msg(serial->dev,
422 usb_rcvctrlpipe(serial->dev, 0),
423 PALM_GET_EXT_CONNECTION_INFORMATION,
424 0xc2, 0x0000, 0x0000, transfer_buffer,
425 sizeof(*connection_info), 300);
426 if (retval < 0)
427 dev_err(dev, "%s - error %d getting connection info\n",
428 __func__, retval);
429 else
430 usb_serial_debug_data(dev, __func__, retval, transfer_buffer);
431
432 kfree(transfer_buffer);
433 return 0;
434}
435
436
437static int visor_probe(struct usb_serial *serial,
438 const struct usb_device_id *id)
439{
440 int retval = 0;
441 int (*startup)(struct usb_serial *serial,
442 const struct usb_device_id *id);
443
444 /*
445 * some Samsung Android phones in modem mode have the same ID
446 * as SPH-I500, but they are ACM devices, so dont bind to them
447 */
448 if (id->idVendor == SAMSUNG_VENDOR_ID &&
449 id->idProduct == SAMSUNG_SPH_I500_ID &&
450 serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
451 serial->dev->descriptor.bDeviceSubClass ==
452 USB_CDC_SUBCLASS_ACM)
453 return -ENODEV;
454
455 if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
456 dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
457 serial->dev->actconfig->desc.bConfigurationValue);
458 return -ENODEV;
459 }
460
461 if (id->driver_info) {
462 startup = (void *)id->driver_info;
463 retval = startup(serial, id);
464 }
465
466 return retval;
467}
468
469static int visor_calc_num_ports(struct usb_serial *serial)
470{
471 int num_ports = (int)(long)(usb_get_serial_data(serial));
472
473 if (num_ports)
474 usb_set_serial_data(serial, NULL);
475
476 return num_ports;
477}
478
479static int clie_3_5_startup(struct usb_serial *serial)
480{
481 struct device *dev = &serial->dev->dev;
482 int result;
483 u8 *data;
484
485 data = kmalloc(1, GFP_KERNEL);
486 if (!data)
487 return -ENOMEM;
488
489 /*
490 * Note that PEG-300 series devices expect the following two calls.
491 */
492
493 /* get the config number */
494 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
495 USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
496 0, 0, data, 1, 3000);
497 if (result < 0) {
498 dev_err(dev, "%s: get config number failed: %d\n",
499 __func__, result);
500 goto out;
501 }
502 if (result != 1) {
503 dev_err(dev, "%s: get config number bad return length: %d\n",
504 __func__, result);
505 result = -EIO;
506 goto out;
507 }
508
509 /* get the interface number */
510 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
511 USB_REQ_GET_INTERFACE,
512 USB_DIR_IN | USB_RECIP_INTERFACE,
513 0, 0, data, 1, 3000);
514 if (result < 0) {
515 dev_err(dev, "%s: get interface number failed: %d\n",
516 __func__, result);
517 goto out;
518 }
519 if (result != 1) {
520 dev_err(dev,
521 "%s: get interface number bad return length: %d\n",
522 __func__, result);
523 result = -EIO;
524 goto out;
525 }
526
527 result = 0;
528out:
529 kfree(data);
530
531 return result;
532}
533
534static int treo_attach(struct usb_serial *serial)
535{
536 struct usb_serial_port *swap_port;
537
538 /* Only do this endpoint hack for the Handspring devices with
539 * interrupt in endpoints, which for now are the Treo devices. */
540 if (!((le16_to_cpu(serial->dev->descriptor.idVendor)
541 == HANDSPRING_VENDOR_ID) ||
542 (le16_to_cpu(serial->dev->descriptor.idVendor)
543 == KYOCERA_VENDOR_ID)) ||
544 (serial->num_interrupt_in == 0))
545 return 0;
546
547 if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) {
548 dev_err(&serial->interface->dev, "missing endpoints\n");
549 return -ENODEV;
550 }
551
552 /*
553 * It appears that Treos and Kyoceras want to use the
554 * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
555 * so let's swap the 1st and 2nd bulk in and interrupt endpoints.
556 * Note that swapping the bulk out endpoints would break lots of
557 * apps that want to communicate on the second port.
558 */
559#define COPY_PORT(dest, src) \
560 do { \
561 int i; \
562 \
563 for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
564 dest->read_urbs[i] = src->read_urbs[i]; \
565 dest->read_urbs[i]->context = dest; \
566 dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
567 } \
568 dest->read_urb = src->read_urb; \
569 dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
570 dest->bulk_in_buffer = src->bulk_in_buffer; \
571 dest->bulk_in_size = src->bulk_in_size; \
572 dest->interrupt_in_urb = src->interrupt_in_urb; \
573 dest->interrupt_in_urb->context = dest; \
574 dest->interrupt_in_endpointAddress = \
575 src->interrupt_in_endpointAddress;\
576 dest->interrupt_in_buffer = src->interrupt_in_buffer; \
577 } while (0);
578
579 swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL);
580 if (!swap_port)
581 return -ENOMEM;
582 COPY_PORT(swap_port, serial->port[0]);
583 COPY_PORT(serial->port[0], serial->port[1]);
584 COPY_PORT(serial->port[1], swap_port);
585 kfree(swap_port);
586
587 return 0;
588}
589
590static int clie_5_attach(struct usb_serial *serial)
591{
592 struct usb_serial_port *port;
593 unsigned int pipe;
594 int j;
595
596 /* TH55 registers 2 ports.
597 Communication in from the UX50/TH55 uses bulk_in_endpointAddress
598 from port 0. Communication out to the UX50/TH55 uses
599 bulk_out_endpointAddress from port 1
600
601 Lets do a quick and dirty mapping
602 */
603
604 /* some sanity check */
605 if (serial->num_bulk_out < 2) {
606 dev_err(&serial->interface->dev, "missing bulk out endpoints\n");
607 return -ENODEV;
608 }
609
610 /* port 0 now uses the modified endpoint Address */
611 port = serial->port[0];
612 port->bulk_out_endpointAddress =
613 serial->port[1]->bulk_out_endpointAddress;
614
615 pipe = usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress);
616 for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j)
617 port->write_urbs[j]->pipe = pipe;
618
619 return 0;
620}
621
622module_usb_serial_driver(serial_drivers, id_table_combined);
623
624MODULE_AUTHOR(DRIVER_AUTHOR);
625MODULE_DESCRIPTION(DRIVER_DESC);
626MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * USB HandSpring Visor, Palm m50x, and Sony Clie driver
4 * (supports all of the Palm OS USB devices)
5 *
6 * Copyright (C) 1999 - 2004
7 * Greg Kroah-Hartman (greg@kroah.com)
8 *
9 * See Documentation/usb/usb-serial.rst for more information on using this
10 * driver
11 *
12 */
13
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_driver.h>
19#include <linux/tty_flip.h>
20#include <linux/module.h>
21#include <linux/moduleparam.h>
22#include <linux/spinlock.h>
23#include <linux/uaccess.h>
24#include <linux/usb.h>
25#include <linux/usb/serial.h>
26#include <linux/usb/cdc.h>
27#include "visor.h"
28
29/*
30 * Version Information
31 */
32#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
33#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
34
35/* function prototypes for a handspring visor */
36static int visor_open(struct tty_struct *tty, struct usb_serial_port *port);
37static void visor_close(struct usb_serial_port *port);
38static int visor_probe(struct usb_serial *serial,
39 const struct usb_device_id *id);
40static int visor_calc_num_ports(struct usb_serial *serial,
41 struct usb_serial_endpoints *epds);
42static int clie_5_calc_num_ports(struct usb_serial *serial,
43 struct usb_serial_endpoints *epds);
44static void visor_read_int_callback(struct urb *urb);
45static int clie_3_5_startup(struct usb_serial *serial);
46static int palm_os_3_probe(struct usb_serial *serial,
47 const struct usb_device_id *id);
48static int palm_os_4_probe(struct usb_serial *serial,
49 const struct usb_device_id *id);
50
51static const struct usb_device_id id_table[] = {
52 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
53 .driver_info = (kernel_ulong_t)&palm_os_3_probe },
54 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID),
55 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
56 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
57 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
58 { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
59 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
60 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
61 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
62 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
63 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
64 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID),
65 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
66 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID),
67 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
68 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID),
69 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
70 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID),
71 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
72 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID),
73 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
74 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
75 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
76 { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650),
77 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
78 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
79 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
80 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
81 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
82 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
83 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
84 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID),
85 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
86 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID),
87 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
88 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID),
89 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
90 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
91 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
92 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
93 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
94 { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
95 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
96 { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff),
97 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
98 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
99 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
100 { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
101 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
102 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
103 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
104 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
105 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
106 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
107 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
108 { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
109 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
110 { } /* Terminating entry */
111};
112
113static const struct usb_device_id clie_id_5_table[] = {
114 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
115 .driver_info = (kernel_ulong_t)&palm_os_4_probe },
116 { } /* Terminating entry */
117};
118
119static const struct usb_device_id clie_id_3_5_table[] = {
120 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
121 { } /* Terminating entry */
122};
123
124static const struct usb_device_id id_table_combined[] = {
125 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
126 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
127 { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
128 { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
129 { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
130 { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
131 { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
132 { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
133 { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) },
134 { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
135 { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
136 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
137 { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
138 { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
139 { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
140 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
141 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
142 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
143 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
144 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
145 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
146 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) },
147 { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
148 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
149 { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
150 { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) },
151 { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
152 { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
153 { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
154 { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
155 { } /* Terminating entry */
156};
157
158MODULE_DEVICE_TABLE(usb, id_table_combined);
159
160/* All of the device info needed for the Handspring Visor,
161 and Palm 4.0 devices */
162static struct usb_serial_driver handspring_device = {
163 .driver = {
164 .name = "visor",
165 },
166 .description = "Handspring Visor / Palm OS",
167 .id_table = id_table,
168 .num_ports = 2,
169 .bulk_out_size = 256,
170 .open = visor_open,
171 .close = visor_close,
172 .throttle = usb_serial_generic_throttle,
173 .unthrottle = usb_serial_generic_unthrottle,
174 .probe = visor_probe,
175 .calc_num_ports = visor_calc_num_ports,
176 .read_int_callback = visor_read_int_callback,
177};
178
179/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
180static struct usb_serial_driver clie_5_device = {
181 .driver = {
182 .name = "clie_5",
183 },
184 .description = "Sony Clie 5.0",
185 .id_table = clie_id_5_table,
186 .num_ports = 2,
187 .num_bulk_out = 2,
188 .bulk_out_size = 256,
189 .open = visor_open,
190 .close = visor_close,
191 .throttle = usb_serial_generic_throttle,
192 .unthrottle = usb_serial_generic_unthrottle,
193 .probe = visor_probe,
194 .calc_num_ports = clie_5_calc_num_ports,
195 .read_int_callback = visor_read_int_callback,
196};
197
198/* device info for the Sony Clie OS version 3.5 */
199static struct usb_serial_driver clie_3_5_device = {
200 .driver = {
201 .name = "clie_3.5",
202 },
203 .description = "Sony Clie 3.5",
204 .id_table = clie_id_3_5_table,
205 .num_ports = 1,
206 .bulk_out_size = 256,
207 .open = visor_open,
208 .close = visor_close,
209 .throttle = usb_serial_generic_throttle,
210 .unthrottle = usb_serial_generic_unthrottle,
211 .attach = clie_3_5_startup,
212};
213
214static struct usb_serial_driver * const serial_drivers[] = {
215 &handspring_device, &clie_5_device, &clie_3_5_device, NULL
216};
217
218/******************************************************************************
219 * Handspring Visor specific driver functions
220 ******************************************************************************/
221static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
222{
223 int result = 0;
224
225 if (!port->read_urb) {
226 /* this is needed for some brain dead Sony devices */
227 dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
228 return -ENODEV;
229 }
230
231 /* Start reading from the device */
232 result = usb_serial_generic_open(tty, port);
233 if (result)
234 goto exit;
235
236 if (port->interrupt_in_urb) {
237 dev_dbg(&port->dev, "adding interrupt input for treo\n");
238 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
239 if (result)
240 dev_err(&port->dev,
241 "%s - failed submitting interrupt urb, error %d\n",
242 __func__, result);
243 }
244exit:
245 return result;
246}
247
248
249static void visor_close(struct usb_serial_port *port)
250{
251 unsigned char *transfer_buffer;
252
253 usb_serial_generic_close(port);
254 usb_kill_urb(port->interrupt_in_urb);
255
256 transfer_buffer = kmalloc(0x12, GFP_KERNEL);
257 if (!transfer_buffer)
258 return;
259 usb_control_msg(port->serial->dev,
260 usb_rcvctrlpipe(port->serial->dev, 0),
261 VISOR_CLOSE_NOTIFICATION, 0xc2,
262 0x0000, 0x0000,
263 transfer_buffer, 0x12, 300);
264 kfree(transfer_buffer);
265}
266
267static void visor_read_int_callback(struct urb *urb)
268{
269 struct usb_serial_port *port = urb->context;
270 int status = urb->status;
271 int result;
272
273 switch (status) {
274 case 0:
275 /* success */
276 break;
277 case -ECONNRESET:
278 case -ENOENT:
279 case -ESHUTDOWN:
280 /* this urb is terminated, clean up */
281 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
282 __func__, status);
283 return;
284 default:
285 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
286 __func__, status);
287 goto exit;
288 }
289
290 /*
291 * This information is still unknown what it can be used for.
292 * If anyone has an idea, please let the author know...
293 *
294 * Rumor has it this endpoint is used to notify when data
295 * is ready to be read from the bulk ones.
296 */
297 usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
298 urb->transfer_buffer);
299
300exit:
301 result = usb_submit_urb(urb, GFP_ATOMIC);
302 if (result)
303 dev_err(&urb->dev->dev,
304 "%s - Error %d submitting interrupt urb\n",
305 __func__, result);
306}
307
308static int palm_os_3_probe(struct usb_serial *serial,
309 const struct usb_device_id *id)
310{
311 struct device *dev = &serial->dev->dev;
312 struct visor_connection_info *connection_info;
313 unsigned char *transfer_buffer;
314 char *string;
315 int retval = 0;
316 int i;
317 int num_ports = 0;
318
319 transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
320 if (!transfer_buffer)
321 return -ENOMEM;
322
323 /* send a get connection info request */
324 retval = usb_control_msg(serial->dev,
325 usb_rcvctrlpipe(serial->dev, 0),
326 VISOR_GET_CONNECTION_INFORMATION,
327 0xc2, 0x0000, 0x0000, transfer_buffer,
328 sizeof(*connection_info), 300);
329 if (retval < 0) {
330 dev_err(dev, "%s - error %d getting connection information\n",
331 __func__, retval);
332 goto exit;
333 }
334
335 if (retval != sizeof(*connection_info)) {
336 dev_err(dev, "Invalid connection information received from device\n");
337 retval = -ENODEV;
338 goto exit;
339 }
340
341 connection_info = (struct visor_connection_info *)transfer_buffer;
342
343 num_ports = le16_to_cpu(connection_info->num_ports);
344
345 /* Handle devices that report invalid stuff here. */
346 if (num_ports == 0 || num_ports > 2) {
347 dev_warn(dev, "%s: No valid connect info available\n",
348 serial->type->description);
349 num_ports = 2;
350 }
351
352 for (i = 0; i < num_ports; ++i) {
353 switch (connection_info->connections[i].port_function_id) {
354 case VISOR_FUNCTION_GENERIC:
355 string = "Generic";
356 break;
357 case VISOR_FUNCTION_DEBUGGER:
358 string = "Debugger";
359 break;
360 case VISOR_FUNCTION_HOTSYNC:
361 string = "HotSync";
362 break;
363 case VISOR_FUNCTION_CONSOLE:
364 string = "Console";
365 break;
366 case VISOR_FUNCTION_REMOTE_FILE_SYS:
367 string = "Remote File System";
368 break;
369 default:
370 string = "unknown";
371 break;
372 }
373 dev_info(dev, "%s: port %d, is for %s use\n",
374 serial->type->description,
375 connection_info->connections[i].port, string);
376 }
377 dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
378 num_ports);
379
380 /*
381 * save off our num_ports info so that we can use it in the
382 * calc_num_ports callback
383 */
384 usb_set_serial_data(serial, (void *)(long)num_ports);
385
386 /* ask for the number of bytes available, but ignore the
387 response as it is broken */
388 retval = usb_control_msg(serial->dev,
389 usb_rcvctrlpipe(serial->dev, 0),
390 VISOR_REQUEST_BYTES_AVAILABLE,
391 0xc2, 0x0000, 0x0005, transfer_buffer,
392 0x02, 300);
393 if (retval < 0)
394 dev_err(dev, "%s - error %d getting bytes available request\n",
395 __func__, retval);
396 retval = 0;
397
398exit:
399 kfree(transfer_buffer);
400
401 return retval;
402}
403
404static int palm_os_4_probe(struct usb_serial *serial,
405 const struct usb_device_id *id)
406{
407 struct device *dev = &serial->dev->dev;
408 struct palm_ext_connection_info *connection_info;
409 unsigned char *transfer_buffer;
410 int retval;
411
412 transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
413 if (!transfer_buffer)
414 return -ENOMEM;
415
416 retval = usb_control_msg(serial->dev,
417 usb_rcvctrlpipe(serial->dev, 0),
418 PALM_GET_EXT_CONNECTION_INFORMATION,
419 0xc2, 0x0000, 0x0000, transfer_buffer,
420 sizeof(*connection_info), 300);
421 if (retval < 0)
422 dev_err(dev, "%s - error %d getting connection info\n",
423 __func__, retval);
424 else
425 usb_serial_debug_data(dev, __func__, retval, transfer_buffer);
426
427 kfree(transfer_buffer);
428 return 0;
429}
430
431
432static int visor_probe(struct usb_serial *serial,
433 const struct usb_device_id *id)
434{
435 int retval = 0;
436 int (*startup)(struct usb_serial *serial,
437 const struct usb_device_id *id);
438
439 /*
440 * some Samsung Android phones in modem mode have the same ID
441 * as SPH-I500, but they are ACM devices, so dont bind to them
442 */
443 if (id->idVendor == SAMSUNG_VENDOR_ID &&
444 id->idProduct == SAMSUNG_SPH_I500_ID &&
445 serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
446 serial->dev->descriptor.bDeviceSubClass ==
447 USB_CDC_SUBCLASS_ACM)
448 return -ENODEV;
449
450 if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
451 dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
452 serial->dev->actconfig->desc.bConfigurationValue);
453 return -ENODEV;
454 }
455
456 if (id->driver_info) {
457 startup = (void *)id->driver_info;
458 retval = startup(serial, id);
459 }
460
461 return retval;
462}
463
464static int visor_calc_num_ports(struct usb_serial *serial,
465 struct usb_serial_endpoints *epds)
466{
467 unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor);
468 int num_ports = (int)(long)(usb_get_serial_data(serial));
469
470 if (num_ports)
471 usb_set_serial_data(serial, NULL);
472
473 /*
474 * Only swap the bulk endpoints for the Handspring devices with
475 * interrupt in endpoints, which for now are the Treo devices.
476 */
477 if (!(vid == HANDSPRING_VENDOR_ID || vid == KYOCERA_VENDOR_ID) ||
478 epds->num_interrupt_in == 0)
479 goto out;
480
481 if (epds->num_bulk_in < 2 || epds->num_interrupt_in < 2) {
482 dev_err(&serial->interface->dev, "missing endpoints\n");
483 return -ENODEV;
484 }
485
486 /*
487 * It appears that Treos and Kyoceras want to use the
488 * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
489 * so let's swap the 1st and 2nd bulk in and interrupt endpoints.
490 * Note that swapping the bulk out endpoints would break lots of
491 * apps that want to communicate on the second port.
492 */
493 swap(epds->bulk_in[0], epds->bulk_in[1]);
494 swap(epds->interrupt_in[0], epds->interrupt_in[1]);
495out:
496 return num_ports;
497}
498
499static int clie_5_calc_num_ports(struct usb_serial *serial,
500 struct usb_serial_endpoints *epds)
501{
502 /*
503 * TH55 registers 2 ports.
504 * Communication in from the UX50/TH55 uses the first bulk-in
505 * endpoint, while communication out to the UX50/TH55 uses the second
506 * bulk-out endpoint.
507 */
508
509 /*
510 * FIXME: Should we swap the descriptors instead of using the same
511 * bulk-out endpoint for both ports?
512 */
513 epds->bulk_out[0] = epds->bulk_out[1];
514
515 return serial->type->num_ports;
516}
517
518static int clie_3_5_startup(struct usb_serial *serial)
519{
520 struct device *dev = &serial->dev->dev;
521 int result;
522 u8 *data;
523
524 data = kmalloc(1, GFP_KERNEL);
525 if (!data)
526 return -ENOMEM;
527
528 /*
529 * Note that PEG-300 series devices expect the following two calls.
530 */
531
532 /* get the config number */
533 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
534 USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
535 0, 0, data, 1, 3000);
536 if (result < 0) {
537 dev_err(dev, "%s: get config number failed: %d\n",
538 __func__, result);
539 goto out;
540 }
541 if (result != 1) {
542 dev_err(dev, "%s: get config number bad return length: %d\n",
543 __func__, result);
544 result = -EIO;
545 goto out;
546 }
547
548 /* get the interface number */
549 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
550 USB_REQ_GET_INTERFACE,
551 USB_DIR_IN | USB_RECIP_INTERFACE,
552 0, 0, data, 1, 3000);
553 if (result < 0) {
554 dev_err(dev, "%s: get interface number failed: %d\n",
555 __func__, result);
556 goto out;
557 }
558 if (result != 1) {
559 dev_err(dev,
560 "%s: get interface number bad return length: %d\n",
561 __func__, result);
562 result = -EIO;
563 goto out;
564 }
565
566 result = 0;
567out:
568 kfree(data);
569
570 return result;
571}
572
573module_usb_serial_driver(serial_drivers, id_table_combined);
574
575MODULE_AUTHOR(DRIVER_AUTHOR);
576MODULE_DESCRIPTION(DRIVER_DESC);
577MODULE_LICENSE("GPL v2");