Loading...
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static const struct file_operations mpt_summary_proc_fops;
201static const struct file_operations mpt_version_proc_fops;
202static const struct file_operations mpt_iocinfo_proc_fops;
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if ((ioc == NULL))
339 return -1;
340
341 pdev = ioc->pcidev;
342 if ((pdev == NULL))
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501}
502
503static void
504mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505{
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571}
572
573/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574/**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590static irqreturn_t
591mpt_interrupt(int irq, void *bus_id)
592{
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611}
612
613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614/**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627static int
628mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629{
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strlcpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832 const struct pci_device_id *id;
833
834 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
835 return -EINVAL;
836
837 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
838
839 /* call per pci device probe entry point */
840 list_for_each_entry(ioc, &ioc_list, list) {
841 id = ioc->pcidev->driver ?
842 ioc->pcidev->driver->id_table : NULL;
843 if (dd_cbfunc->probe)
844 dd_cbfunc->probe(ioc->pcidev, id);
845 }
846
847 return 0;
848}
849
850/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
851/**
852 * mpt_device_driver_deregister - DeRegister device driver hooks
853 * @cb_idx: MPT protocol driver index
854 */
855void
856mpt_device_driver_deregister(u8 cb_idx)
857{
858 struct mpt_pci_driver *dd_cbfunc;
859 MPT_ADAPTER *ioc;
860
861 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
862 return;
863
864 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
865
866 list_for_each_entry(ioc, &ioc_list, list) {
867 if (dd_cbfunc->remove)
868 dd_cbfunc->remove(ioc->pcidev);
869 }
870
871 MptDeviceDriverHandlers[cb_idx] = NULL;
872}
873
874
875/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
876/**
877 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
878 * @cb_idx: Handle of registered MPT protocol driver
879 * @ioc: Pointer to MPT adapter structure
880 *
881 * Obtain an MPT request frame from the pool (of 1024) that are
882 * allocated per MPT adapter.
883 *
884 * Returns pointer to a MPT request frame or %NULL if none are available
885 * or IOC is not active.
886 */
887MPT_FRAME_HDR*
888mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
889{
890 MPT_FRAME_HDR *mf;
891 unsigned long flags;
892 u16 req_idx; /* Request index */
893
894 /* validate handle and ioc identifier */
895
896#ifdef MFCNT
897 if (!ioc->active)
898 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
899 "returning NULL!\n", ioc->name);
900#endif
901
902 /* If interrupts are not attached, do not return a request frame */
903 if (!ioc->active)
904 return NULL;
905
906 spin_lock_irqsave(&ioc->FreeQlock, flags);
907 if (!list_empty(&ioc->FreeQ)) {
908 int req_offset;
909
910 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
911 u.frame.linkage.list);
912 list_del(&mf->u.frame.linkage.list);
913 mf->u.frame.linkage.arg1 = 0;
914 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
915 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
916 /* u16! */
917 req_idx = req_offset / ioc->req_sz;
918 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
919 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
920 /* Default, will be changed if necessary in SG generation */
921 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
922#ifdef MFCNT
923 ioc->mfcnt++;
924#endif
925 }
926 else
927 mf = NULL;
928 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
929
930#ifdef MFCNT
931 if (mf == NULL)
932 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
933 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
934 ioc->req_depth);
935 mfcounter++;
936 if (mfcounter == PRINT_MF_COUNT)
937 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
938 ioc->mfcnt, ioc->req_depth);
939#endif
940
941 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
942 ioc->name, cb_idx, ioc->id, mf));
943 return mf;
944}
945
946/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
947/**
948 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
949 * @cb_idx: Handle of registered MPT protocol driver
950 * @ioc: Pointer to MPT adapter structure
951 * @mf: Pointer to MPT request frame
952 *
953 * This routine posts an MPT request frame to the request post FIFO of a
954 * specific MPT adapter.
955 */
956void
957mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
958{
959 u32 mf_dma_addr;
960 int req_offset;
961 u16 req_idx; /* Request index */
962
963 /* ensure values are reset properly! */
964 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
965 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
966 /* u16! */
967 req_idx = req_offset / ioc->req_sz;
968 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
969 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
970
971 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
972
973 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
974 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
975 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
976 ioc->RequestNB[req_idx]));
977 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
978}
979
980/**
981 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
982 * @cb_idx: Handle of registered MPT protocol driver
983 * @ioc: Pointer to MPT adapter structure
984 * @mf: Pointer to MPT request frame
985 *
986 * Send a protocol-specific MPT request frame to an IOC using
987 * hi-priority request queue.
988 *
989 * This routine posts an MPT request frame to the request post FIFO of a
990 * specific MPT adapter.
991 **/
992void
993mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
994{
995 u32 mf_dma_addr;
996 int req_offset;
997 u16 req_idx; /* Request index */
998
999 /* ensure values are reset properly! */
1000 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002 req_idx = req_offset / ioc->req_sz;
1003 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010 ioc->name, mf_dma_addr, req_idx));
1011 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012}
1013
1014/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015/**
1016 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017 * @ioc: Pointer to MPT adapter structure
1018 * @mf: Pointer to MPT request frame
1019 *
1020 * This routine places a MPT request frame back on the MPT adapter's
1021 * FreeQ.
1022 */
1023void
1024mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025{
1026 unsigned long flags;
1027
1028 /* Put Request back on FreeQ! */
1029 spin_lock_irqsave(&ioc->FreeQlock, flags);
1030 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031 goto out;
1032 /* signature to know if this mf is freed */
1033 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035#ifdef MFCNT
1036 ioc->mfcnt--;
1037#endif
1038 out:
1039 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040}
1041
1042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043/**
1044 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045 * @pAddr: virtual address for SGE
1046 * @flagslength: SGE flags and data transfer length
1047 * @dma_addr: Physical address
1048 *
1049 * This routine places a MPT request frame back on the MPT adapter's
1050 * FreeQ.
1051 */
1052static void
1053mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054{
1055 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056 pSge->FlagsLength = cpu_to_le32(flagslength);
1057 pSge->Address = cpu_to_le32(dma_addr);
1058}
1059
1060/**
1061 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062 * @pAddr: virtual address for SGE
1063 * @flagslength: SGE flags and data transfer length
1064 * @dma_addr: Physical address
1065 *
1066 * This routine places a MPT request frame back on the MPT adapter's
1067 * FreeQ.
1068 **/
1069static void
1070mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071{
1072 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073 pSge->Address.Low = cpu_to_le32
1074 (lower_32_bits(dma_addr));
1075 pSge->Address.High = cpu_to_le32
1076 (upper_32_bits(dma_addr));
1077 pSge->FlagsLength = cpu_to_le32
1078 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079}
1080
1081/**
1082 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083 * @pAddr: virtual address for SGE
1084 * @flagslength: SGE flags and data transfer length
1085 * @dma_addr: Physical address
1086 *
1087 * This routine places a MPT request frame back on the MPT adapter's
1088 * FreeQ.
1089 **/
1090static void
1091mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092{
1093 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094 u32 tmp;
1095
1096 pSge->Address.Low = cpu_to_le32
1097 (lower_32_bits(dma_addr));
1098 tmp = (u32)(upper_32_bits(dma_addr));
1099
1100 /*
1101 * 1078 errata workaround for the 36GB limitation
1102 */
1103 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1104 flagslength |=
1105 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106 tmp |= (1<<31);
1107 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108 printk(KERN_DEBUG "1078 P0M2 addressing for "
1109 "addr = 0x%llx len = %d\n",
1110 (unsigned long long)dma_addr,
1111 MPI_SGE_LENGTH(flagslength));
1112 }
1113
1114 pSge->Address.High = cpu_to_le32(tmp);
1115 pSge->FlagsLength = cpu_to_le32(
1116 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117}
1118
1119/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120/**
1121 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122 * @pAddr: virtual address for SGE
1123 * @next: nextChainOffset value (u32's)
1124 * @length: length of next SGL segment
1125 * @dma_addr: Physical address
1126 *
1127 */
1128static void
1129mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130{
1131 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132 pChain->Length = cpu_to_le16(length);
1133 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1134 pChain->NextChainOffset = next;
1135 pChain->Address = cpu_to_le32(dma_addr);
1136}
1137
1138/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1139/**
1140 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1141 * @pAddr: virtual address for SGE
1142 * @next: nextChainOffset value (u32's)
1143 * @length: length of next SGL segment
1144 * @dma_addr: Physical address
1145 *
1146 */
1147static void
1148mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1149{
1150 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1151 u32 tmp = dma_addr & 0xFFFFFFFF;
1152
1153 pChain->Length = cpu_to_le16(length);
1154 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1155 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1156
1157 pChain->NextChainOffset = next;
1158
1159 pChain->Address.Low = cpu_to_le32(tmp);
1160 tmp = (u32)(upper_32_bits(dma_addr));
1161 pChain->Address.High = cpu_to_le32(tmp);
1162}
1163
1164/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165/**
1166 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1167 * @cb_idx: Handle of registered MPT protocol driver
1168 * @ioc: Pointer to MPT adapter structure
1169 * @reqBytes: Size of the request in bytes
1170 * @req: Pointer to MPT request frame
1171 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1172 *
1173 * This routine is used exclusively to send MptScsiTaskMgmt
1174 * requests since they are required to be sent via doorbell handshake.
1175 *
1176 * NOTE: It is the callers responsibility to byte-swap fields in the
1177 * request which are greater than 1 byte in size.
1178 *
1179 * Returns 0 for success, non-zero for failure.
1180 */
1181int
1182mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1183{
1184 int r = 0;
1185 u8 *req_as_bytes;
1186 int ii;
1187
1188 /* State is known to be good upon entering
1189 * this function so issue the bus reset
1190 * request.
1191 */
1192
1193 /*
1194 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1195 * setting cb_idx/req_idx. But ONLY if this request
1196 * is in proper (pre-alloc'd) request buffer range...
1197 */
1198 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1199 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1200 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1201 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1202 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1203 }
1204
1205 /* Make sure there are no doorbells */
1206 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1207
1208 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1209 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1210 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1211
1212 /* Wait for IOC doorbell int */
1213 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1214 return ii;
1215 }
1216
1217 /* Read doorbell and check for active bit */
1218 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1219 return -5;
1220
1221 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1222 ioc->name, ii));
1223
1224 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1225
1226 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1227 return -2;
1228 }
1229
1230 /* Send request via doorbell handshake */
1231 req_as_bytes = (u8 *) req;
1232 for (ii = 0; ii < reqBytes/4; ii++) {
1233 u32 word;
1234
1235 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1236 (req_as_bytes[(ii*4) + 1] << 8) |
1237 (req_as_bytes[(ii*4) + 2] << 16) |
1238 (req_as_bytes[(ii*4) + 3] << 24));
1239 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1240 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1241 r = -3;
1242 break;
1243 }
1244 }
1245
1246 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1247 r = 0;
1248 else
1249 r = -4;
1250
1251 /* Make sure there are no doorbells */
1252 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1253
1254 return r;
1255}
1256
1257/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258/**
1259 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1260 * @ioc: Pointer to MPT adapter structure
1261 * @access_control_value: define bits below
1262 * @sleepFlag: Specifies whether the process can sleep
1263 *
1264 * Provides mechanism for the host driver to control the IOC's
1265 * Host Page Buffer access.
1266 *
1267 * Access Control Value - bits[15:12]
1268 * 0h Reserved
1269 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1270 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1271 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1272 *
1273 * Returns 0 for success, non-zero for failure.
1274 */
1275
1276static int
1277mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1278{
1279 int r = 0;
1280
1281 /* return if in use */
1282 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1283 & MPI_DOORBELL_ACTIVE)
1284 return -1;
1285
1286 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1287
1288 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1289 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1290 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1291 (access_control_value<<12)));
1292
1293 /* Wait for IOC to clear Doorbell Status bit */
1294 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1295 return -2;
1296 }else
1297 return 0;
1298}
1299
1300/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1301/**
1302 * mpt_host_page_alloc - allocate system memory for the fw
1303 * @ioc: Pointer to pointer to IOC adapter
1304 * @ioc_init: Pointer to ioc init config page
1305 *
1306 * If we already allocated memory in past, then resend the same pointer.
1307 * Returns 0 for success, non-zero for failure.
1308 */
1309static int
1310mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1311{
1312 char *psge;
1313 int flags_length;
1314 u32 host_page_buffer_sz=0;
1315
1316 if(!ioc->HostPageBuffer) {
1317
1318 host_page_buffer_sz =
1319 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1320
1321 if(!host_page_buffer_sz)
1322 return 0; /* fw doesn't need any host buffers */
1323
1324 /* spin till we get enough memory */
1325 while(host_page_buffer_sz > 0) {
1326
1327 if((ioc->HostPageBuffer = pci_alloc_consistent(
1328 ioc->pcidev,
1329 host_page_buffer_sz,
1330 &ioc->HostPageBuffer_dma)) != NULL) {
1331
1332 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1333 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1334 ioc->name, ioc->HostPageBuffer,
1335 (u32)ioc->HostPageBuffer_dma,
1336 host_page_buffer_sz));
1337 ioc->alloc_total += host_page_buffer_sz;
1338 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1339 break;
1340 }
1341
1342 host_page_buffer_sz -= (4*1024);
1343 }
1344 }
1345
1346 if(!ioc->HostPageBuffer) {
1347 printk(MYIOC_s_ERR_FMT
1348 "Failed to alloc memory for host_page_buffer!\n",
1349 ioc->name);
1350 return -999;
1351 }
1352
1353 psge = (char *)&ioc_init->HostPageBufferSGE;
1354 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1355 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1356 MPI_SGE_FLAGS_HOST_TO_IOC |
1357 MPI_SGE_FLAGS_END_OF_BUFFER;
1358 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1359 flags_length |= ioc->HostPageBuffer_sz;
1360 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1361 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1362
1363return 0;
1364}
1365
1366/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1367/**
1368 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1369 * @iocid: IOC unique identifier (integer)
1370 * @iocpp: Pointer to pointer to IOC adapter
1371 *
1372 * Given a unique IOC identifier, set pointer to the associated MPT
1373 * adapter structure.
1374 *
1375 * Returns iocid and sets iocpp if iocid is found.
1376 * Returns -1 if iocid is not found.
1377 */
1378int
1379mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1380{
1381 MPT_ADAPTER *ioc;
1382
1383 list_for_each_entry(ioc,&ioc_list,list) {
1384 if (ioc->id == iocid) {
1385 *iocpp =ioc;
1386 return iocid;
1387 }
1388 }
1389
1390 *iocpp = NULL;
1391 return -1;
1392}
1393
1394/**
1395 * mpt_get_product_name - returns product string
1396 * @vendor: pci vendor id
1397 * @device: pci device id
1398 * @revision: pci revision id
1399 *
1400 * Returns product string displayed when driver loads,
1401 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1402 *
1403 **/
1404static const char*
1405mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1406{
1407 char *product_str = NULL;
1408
1409 if (vendor == PCI_VENDOR_ID_BROCADE) {
1410 switch (device)
1411 {
1412 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1413 switch (revision)
1414 {
1415 case 0x00:
1416 product_str = "BRE040 A0";
1417 break;
1418 case 0x01:
1419 product_str = "BRE040 A1";
1420 break;
1421 default:
1422 product_str = "BRE040";
1423 break;
1424 }
1425 break;
1426 }
1427 goto out;
1428 }
1429
1430 switch (device)
1431 {
1432 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1433 product_str = "LSIFC909 B1";
1434 break;
1435 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1436 product_str = "LSIFC919 B0";
1437 break;
1438 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1439 product_str = "LSIFC929 B0";
1440 break;
1441 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1442 if (revision < 0x80)
1443 product_str = "LSIFC919X A0";
1444 else
1445 product_str = "LSIFC919XL A1";
1446 break;
1447 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1448 if (revision < 0x80)
1449 product_str = "LSIFC929X A0";
1450 else
1451 product_str = "LSIFC929XL A1";
1452 break;
1453 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1454 product_str = "LSIFC939X A1";
1455 break;
1456 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1457 product_str = "LSIFC949X A1";
1458 break;
1459 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1460 switch (revision)
1461 {
1462 case 0x00:
1463 product_str = "LSIFC949E A0";
1464 break;
1465 case 0x01:
1466 product_str = "LSIFC949E A1";
1467 break;
1468 default:
1469 product_str = "LSIFC949E";
1470 break;
1471 }
1472 break;
1473 case MPI_MANUFACTPAGE_DEVID_53C1030:
1474 switch (revision)
1475 {
1476 case 0x00:
1477 product_str = "LSI53C1030 A0";
1478 break;
1479 case 0x01:
1480 product_str = "LSI53C1030 B0";
1481 break;
1482 case 0x03:
1483 product_str = "LSI53C1030 B1";
1484 break;
1485 case 0x07:
1486 product_str = "LSI53C1030 B2";
1487 break;
1488 case 0x08:
1489 product_str = "LSI53C1030 C0";
1490 break;
1491 case 0x80:
1492 product_str = "LSI53C1030T A0";
1493 break;
1494 case 0x83:
1495 product_str = "LSI53C1030T A2";
1496 break;
1497 case 0x87:
1498 product_str = "LSI53C1030T A3";
1499 break;
1500 case 0xc1:
1501 product_str = "LSI53C1020A A1";
1502 break;
1503 default:
1504 product_str = "LSI53C1030";
1505 break;
1506 }
1507 break;
1508 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1509 switch (revision)
1510 {
1511 case 0x03:
1512 product_str = "LSI53C1035 A2";
1513 break;
1514 case 0x04:
1515 product_str = "LSI53C1035 B0";
1516 break;
1517 default:
1518 product_str = "LSI53C1035";
1519 break;
1520 }
1521 break;
1522 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1523 switch (revision)
1524 {
1525 case 0x00:
1526 product_str = "LSISAS1064 A1";
1527 break;
1528 case 0x01:
1529 product_str = "LSISAS1064 A2";
1530 break;
1531 case 0x02:
1532 product_str = "LSISAS1064 A3";
1533 break;
1534 case 0x03:
1535 product_str = "LSISAS1064 A4";
1536 break;
1537 default:
1538 product_str = "LSISAS1064";
1539 break;
1540 }
1541 break;
1542 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1543 switch (revision)
1544 {
1545 case 0x00:
1546 product_str = "LSISAS1064E A0";
1547 break;
1548 case 0x01:
1549 product_str = "LSISAS1064E B0";
1550 break;
1551 case 0x02:
1552 product_str = "LSISAS1064E B1";
1553 break;
1554 case 0x04:
1555 product_str = "LSISAS1064E B2";
1556 break;
1557 case 0x08:
1558 product_str = "LSISAS1064E B3";
1559 break;
1560 default:
1561 product_str = "LSISAS1064E";
1562 break;
1563 }
1564 break;
1565 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1566 switch (revision)
1567 {
1568 case 0x00:
1569 product_str = "LSISAS1068 A0";
1570 break;
1571 case 0x01:
1572 product_str = "LSISAS1068 B0";
1573 break;
1574 case 0x02:
1575 product_str = "LSISAS1068 B1";
1576 break;
1577 default:
1578 product_str = "LSISAS1068";
1579 break;
1580 }
1581 break;
1582 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1583 switch (revision)
1584 {
1585 case 0x00:
1586 product_str = "LSISAS1068E A0";
1587 break;
1588 case 0x01:
1589 product_str = "LSISAS1068E B0";
1590 break;
1591 case 0x02:
1592 product_str = "LSISAS1068E B1";
1593 break;
1594 case 0x04:
1595 product_str = "LSISAS1068E B2";
1596 break;
1597 case 0x08:
1598 product_str = "LSISAS1068E B3";
1599 break;
1600 default:
1601 product_str = "LSISAS1068E";
1602 break;
1603 }
1604 break;
1605 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1606 switch (revision)
1607 {
1608 case 0x00:
1609 product_str = "LSISAS1078 A0";
1610 break;
1611 case 0x01:
1612 product_str = "LSISAS1078 B0";
1613 break;
1614 case 0x02:
1615 product_str = "LSISAS1078 C0";
1616 break;
1617 case 0x03:
1618 product_str = "LSISAS1078 C1";
1619 break;
1620 case 0x04:
1621 product_str = "LSISAS1078 C2";
1622 break;
1623 default:
1624 product_str = "LSISAS1078";
1625 break;
1626 }
1627 break;
1628 }
1629
1630 out:
1631 return product_str;
1632}
1633
1634/**
1635 * mpt_mapresources - map in memory mapped io
1636 * @ioc: Pointer to pointer to IOC adapter
1637 *
1638 **/
1639static int
1640mpt_mapresources(MPT_ADAPTER *ioc)
1641{
1642 u8 __iomem *mem;
1643 int ii;
1644 resource_size_t mem_phys;
1645 unsigned long port;
1646 u32 msize;
1647 u32 psize;
1648 int r = -ENODEV;
1649 struct pci_dev *pdev;
1650
1651 pdev = ioc->pcidev;
1652 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1653 if (pci_enable_device_mem(pdev)) {
1654 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1655 "failed\n", ioc->name);
1656 return r;
1657 }
1658 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1659 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1660 "MEM failed\n", ioc->name);
1661 goto out_pci_disable_device;
1662 }
1663
1664 if (sizeof(dma_addr_t) > 4) {
1665 const uint64_t required_mask = dma_get_required_mask
1666 (&pdev->dev);
1667 if (required_mask > DMA_BIT_MASK(32)
1668 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1669 && !pci_set_consistent_dma_mask(pdev,
1670 DMA_BIT_MASK(64))) {
1671 ioc->dma_mask = DMA_BIT_MASK(64);
1672 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1673 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1674 ioc->name));
1675 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1676 && !pci_set_consistent_dma_mask(pdev,
1677 DMA_BIT_MASK(32))) {
1678 ioc->dma_mask = DMA_BIT_MASK(32);
1679 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1680 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1681 ioc->name));
1682 } else {
1683 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1684 ioc->name, pci_name(pdev));
1685 goto out_pci_release_region;
1686 }
1687 } else {
1688 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1689 && !pci_set_consistent_dma_mask(pdev,
1690 DMA_BIT_MASK(32))) {
1691 ioc->dma_mask = DMA_BIT_MASK(32);
1692 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1693 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1694 ioc->name));
1695 } else {
1696 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1697 ioc->name, pci_name(pdev));
1698 goto out_pci_release_region;
1699 }
1700 }
1701
1702 mem_phys = msize = 0;
1703 port = psize = 0;
1704 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1705 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1706 if (psize)
1707 continue;
1708 /* Get I/O space! */
1709 port = pci_resource_start(pdev, ii);
1710 psize = pci_resource_len(pdev, ii);
1711 } else {
1712 if (msize)
1713 continue;
1714 /* Get memmap */
1715 mem_phys = pci_resource_start(pdev, ii);
1716 msize = pci_resource_len(pdev, ii);
1717 }
1718 }
1719 ioc->mem_size = msize;
1720
1721 mem = NULL;
1722 /* Get logical ptr for PciMem0 space */
1723 /*mem = ioremap(mem_phys, msize);*/
1724 mem = ioremap(mem_phys, msize);
1725 if (mem == NULL) {
1726 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1727 " memory!\n", ioc->name);
1728 r = -EINVAL;
1729 goto out_pci_release_region;
1730 }
1731 ioc->memmap = mem;
1732 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1733 ioc->name, mem, (unsigned long long)mem_phys));
1734
1735 ioc->mem_phys = mem_phys;
1736 ioc->chip = (SYSIF_REGS __iomem *)mem;
1737
1738 /* Save Port IO values in case we need to do downloadboot */
1739 ioc->pio_mem_phys = port;
1740 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1741
1742 return 0;
1743
1744out_pci_release_region:
1745 pci_release_selected_regions(pdev, ioc->bars);
1746out_pci_disable_device:
1747 pci_disable_device(pdev);
1748 return r;
1749}
1750
1751/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1752/**
1753 * mpt_attach - Install a PCI intelligent MPT adapter.
1754 * @pdev: Pointer to pci_dev structure
1755 * @id: PCI device ID information
1756 *
1757 * This routine performs all the steps necessary to bring the IOC of
1758 * a MPT adapter to a OPERATIONAL state. This includes registering
1759 * memory regions, registering the interrupt, and allocating request
1760 * and reply memory pools.
1761 *
1762 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1763 * MPT adapter.
1764 *
1765 * Returns 0 for success, non-zero for failure.
1766 *
1767 * TODO: Add support for polled controllers
1768 */
1769int
1770mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1771{
1772 MPT_ADAPTER *ioc;
1773 u8 cb_idx;
1774 int r = -ENODEV;
1775 u8 pcixcmd;
1776 static int mpt_ids = 0;
1777#ifdef CONFIG_PROC_FS
1778 struct proc_dir_entry *dent;
1779#endif
1780
1781 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1782 if (ioc == NULL) {
1783 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1784 return -ENOMEM;
1785 }
1786
1787 ioc->id = mpt_ids++;
1788 sprintf(ioc->name, "ioc%d", ioc->id);
1789 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1790
1791 /*
1792 * set initial debug level
1793 * (refer to mptdebug.h)
1794 *
1795 */
1796 ioc->debug_level = mpt_debug_level;
1797 if (mpt_debug_level)
1798 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1799
1800 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1801
1802 ioc->pcidev = pdev;
1803 if (mpt_mapresources(ioc)) {
1804 goto out_free_ioc;
1805 }
1806
1807 /*
1808 * Setting up proper handlers for scatter gather handling
1809 */
1810 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1811 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1812 ioc->add_sge = &mpt_add_sge_64bit_1078;
1813 else
1814 ioc->add_sge = &mpt_add_sge_64bit;
1815 ioc->add_chain = &mpt_add_chain_64bit;
1816 ioc->sg_addr_size = 8;
1817 } else {
1818 ioc->add_sge = &mpt_add_sge;
1819 ioc->add_chain = &mpt_add_chain;
1820 ioc->sg_addr_size = 4;
1821 }
1822 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1823
1824 ioc->alloc_total = sizeof(MPT_ADAPTER);
1825 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1826 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1827
1828
1829 spin_lock_init(&ioc->taskmgmt_lock);
1830 mutex_init(&ioc->internal_cmds.mutex);
1831 init_completion(&ioc->internal_cmds.done);
1832 mutex_init(&ioc->mptbase_cmds.mutex);
1833 init_completion(&ioc->mptbase_cmds.done);
1834 mutex_init(&ioc->taskmgmt_cmds.mutex);
1835 init_completion(&ioc->taskmgmt_cmds.done);
1836
1837 /* Initialize the event logging.
1838 */
1839 ioc->eventTypes = 0; /* None */
1840 ioc->eventContext = 0;
1841 ioc->eventLogSize = 0;
1842 ioc->events = NULL;
1843
1844#ifdef MFCNT
1845 ioc->mfcnt = 0;
1846#endif
1847
1848 ioc->sh = NULL;
1849 ioc->cached_fw = NULL;
1850
1851 /* Initialize SCSI Config Data structure
1852 */
1853 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1854
1855 /* Initialize the fc rport list head.
1856 */
1857 INIT_LIST_HEAD(&ioc->fc_rports);
1858
1859 /* Find lookup slot. */
1860 INIT_LIST_HEAD(&ioc->list);
1861
1862
1863 /* Initialize workqueue */
1864 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1865
1866 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1867 "mpt_poll_%d", ioc->id);
1868 ioc->reset_work_q =
1869 create_singlethread_workqueue(ioc->reset_work_q_name);
1870 if (!ioc->reset_work_q) {
1871 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1872 ioc->name);
1873 r = -ENOMEM;
1874 goto out_unmap_resources;
1875 }
1876
1877 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1878 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1879
1880 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1881 pdev->revision);
1882
1883 switch (pdev->device)
1884 {
1885 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1886 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1887 ioc->errata_flag_1064 = 1;
1888 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1889 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1890 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1891 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1892 ioc->bus_type = FC;
1893 break;
1894
1895 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1896 if (pdev->revision < XL_929) {
1897 /* 929X Chip Fix. Set Split transactions level
1898 * for PCIX. Set MOST bits to zero.
1899 */
1900 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1901 pcixcmd &= 0x8F;
1902 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1903 } else {
1904 /* 929XL Chip Fix. Set MMRBC to 0x08.
1905 */
1906 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1907 pcixcmd |= 0x08;
1908 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1909 }
1910 ioc->bus_type = FC;
1911 break;
1912
1913 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1914 /* 919X Chip Fix. Set Split transactions level
1915 * for PCIX. Set MOST bits to zero.
1916 */
1917 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1918 pcixcmd &= 0x8F;
1919 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1920 ioc->bus_type = FC;
1921 break;
1922
1923 case MPI_MANUFACTPAGE_DEVID_53C1030:
1924 /* 1030 Chip Fix. Disable Split transactions
1925 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1926 */
1927 if (pdev->revision < C0_1030) {
1928 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1929 pcixcmd &= 0x8F;
1930 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1931 }
1932
1933 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1934 ioc->bus_type = SPI;
1935 break;
1936
1937 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1939 ioc->errata_flag_1064 = 1;
1940 ioc->bus_type = SAS;
1941 break;
1942
1943 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1944 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1945 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1946 ioc->bus_type = SAS;
1947 break;
1948 }
1949
1950
1951 switch (ioc->bus_type) {
1952
1953 case SAS:
1954 ioc->msi_enable = mpt_msi_enable_sas;
1955 break;
1956
1957 case SPI:
1958 ioc->msi_enable = mpt_msi_enable_spi;
1959 break;
1960
1961 case FC:
1962 ioc->msi_enable = mpt_msi_enable_fc;
1963 break;
1964
1965 default:
1966 ioc->msi_enable = 0;
1967 break;
1968 }
1969
1970 ioc->fw_events_off = 1;
1971
1972 if (ioc->errata_flag_1064)
1973 pci_disable_io_access(pdev);
1974
1975 spin_lock_init(&ioc->FreeQlock);
1976
1977 /* Disable all! */
1978 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1979 ioc->active = 0;
1980 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1981
1982 /* Set IOC ptr in the pcidev's driver data. */
1983 pci_set_drvdata(ioc->pcidev, ioc);
1984
1985 /* Set lookup ptr. */
1986 list_add_tail(&ioc->list, &ioc_list);
1987
1988 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1989 */
1990 mpt_detect_bound_ports(ioc, pdev);
1991
1992 INIT_LIST_HEAD(&ioc->fw_event_list);
1993 spin_lock_init(&ioc->fw_event_lock);
1994 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1995 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
1996 if (!ioc->fw_event_q) {
1997 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1998 ioc->name);
1999 r = -ENOMEM;
2000 goto out_remove_ioc;
2001 }
2002
2003 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2004 CAN_SLEEP)) != 0){
2005 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2006 ioc->name, r);
2007
2008 destroy_workqueue(ioc->fw_event_q);
2009 ioc->fw_event_q = NULL;
2010
2011 list_del(&ioc->list);
2012 if (ioc->alt_ioc)
2013 ioc->alt_ioc->alt_ioc = NULL;
2014 iounmap(ioc->memmap);
2015 if (pci_is_enabled(pdev))
2016 pci_disable_device(pdev);
2017 if (r != -5)
2018 pci_release_selected_regions(pdev, ioc->bars);
2019
2020 destroy_workqueue(ioc->reset_work_q);
2021 ioc->reset_work_q = NULL;
2022
2023 kfree(ioc);
2024 return r;
2025 }
2026
2027 /* call per device driver probe entry point */
2028 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2029 if(MptDeviceDriverHandlers[cb_idx] &&
2030 MptDeviceDriverHandlers[cb_idx]->probe) {
2031 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2032 }
2033 }
2034
2035#ifdef CONFIG_PROC_FS
2036 /*
2037 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2038 */
2039 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2040 if (dent) {
2041 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2042 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2043 }
2044#endif
2045
2046 if (!ioc->alt_ioc)
2047 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2048 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2049
2050 return 0;
2051
2052out_remove_ioc:
2053 list_del(&ioc->list);
2054 if (ioc->alt_ioc)
2055 ioc->alt_ioc->alt_ioc = NULL;
2056
2057 destroy_workqueue(ioc->reset_work_q);
2058 ioc->reset_work_q = NULL;
2059
2060out_unmap_resources:
2061 iounmap(ioc->memmap);
2062 pci_disable_device(pdev);
2063 pci_release_selected_regions(pdev, ioc->bars);
2064
2065out_free_ioc:
2066 kfree(ioc);
2067
2068 return r;
2069}
2070
2071/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2072/**
2073 * mpt_detach - Remove a PCI intelligent MPT adapter.
2074 * @pdev: Pointer to pci_dev structure
2075 */
2076
2077void
2078mpt_detach(struct pci_dev *pdev)
2079{
2080 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2081 char pname[32];
2082 u8 cb_idx;
2083 unsigned long flags;
2084 struct workqueue_struct *wq;
2085
2086 /*
2087 * Stop polling ioc for fault condition
2088 */
2089 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2090 wq = ioc->reset_work_q;
2091 ioc->reset_work_q = NULL;
2092 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2093 cancel_delayed_work(&ioc->fault_reset_work);
2094 destroy_workqueue(wq);
2095
2096 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2097 wq = ioc->fw_event_q;
2098 ioc->fw_event_q = NULL;
2099 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2100 destroy_workqueue(wq);
2101
2102 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2103 remove_proc_entry(pname, NULL);
2104 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2105 remove_proc_entry(pname, NULL);
2106 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2107 remove_proc_entry(pname, NULL);
2108
2109 /* call per device driver remove entry point */
2110 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2111 if(MptDeviceDriverHandlers[cb_idx] &&
2112 MptDeviceDriverHandlers[cb_idx]->remove) {
2113 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2114 }
2115 }
2116
2117 /* Disable interrupts! */
2118 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2119
2120 ioc->active = 0;
2121 synchronize_irq(pdev->irq);
2122
2123 /* Clear any lingering interrupt */
2124 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2125
2126 CHIPREG_READ32(&ioc->chip->IntStatus);
2127
2128 mpt_adapter_dispose(ioc);
2129
2130}
2131
2132/**************************************************************************
2133 * Power Management
2134 */
2135#ifdef CONFIG_PM
2136/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2137/**
2138 * mpt_suspend - Fusion MPT base driver suspend routine.
2139 * @pdev: Pointer to pci_dev structure
2140 * @state: new state to enter
2141 */
2142int
2143mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2144{
2145 u32 device_state;
2146 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2147
2148 device_state = pci_choose_state(pdev, state);
2149 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2150 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2151 device_state);
2152
2153 /* put ioc into READY_STATE */
2154 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2155 printk(MYIOC_s_ERR_FMT
2156 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2157 }
2158
2159 /* disable interrupts */
2160 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2161 ioc->active = 0;
2162
2163 /* Clear any lingering interrupt */
2164 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2165
2166 free_irq(ioc->pci_irq, ioc);
2167 if (ioc->msi_enable)
2168 pci_disable_msi(ioc->pcidev);
2169 ioc->pci_irq = -1;
2170 pci_save_state(pdev);
2171 pci_disable_device(pdev);
2172 pci_release_selected_regions(pdev, ioc->bars);
2173 pci_set_power_state(pdev, device_state);
2174 return 0;
2175}
2176
2177/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2178/**
2179 * mpt_resume - Fusion MPT base driver resume routine.
2180 * @pdev: Pointer to pci_dev structure
2181 */
2182int
2183mpt_resume(struct pci_dev *pdev)
2184{
2185 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2186 u32 device_state = pdev->current_state;
2187 int recovery_state;
2188 int err;
2189
2190 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2191 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2192 device_state);
2193
2194 pci_set_power_state(pdev, PCI_D0);
2195 pci_enable_wake(pdev, PCI_D0, 0);
2196 pci_restore_state(pdev);
2197 ioc->pcidev = pdev;
2198 err = mpt_mapresources(ioc);
2199 if (err)
2200 return err;
2201
2202 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2203 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2204 ioc->add_sge = &mpt_add_sge_64bit_1078;
2205 else
2206 ioc->add_sge = &mpt_add_sge_64bit;
2207 ioc->add_chain = &mpt_add_chain_64bit;
2208 ioc->sg_addr_size = 8;
2209 } else {
2210
2211 ioc->add_sge = &mpt_add_sge;
2212 ioc->add_chain = &mpt_add_chain;
2213 ioc->sg_addr_size = 4;
2214 }
2215 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2216
2217 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2218 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2219 CHIPREG_READ32(&ioc->chip->Doorbell));
2220
2221 /*
2222 * Errata workaround for SAS pci express:
2223 * Upon returning to the D0 state, the contents of the doorbell will be
2224 * stale data, and this will incorrectly signal to the host driver that
2225 * the firmware is ready to process mpt commands. The workaround is
2226 * to issue a diagnostic reset.
2227 */
2228 if (ioc->bus_type == SAS && (pdev->device ==
2229 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2230 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2231 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2232 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2233 ioc->name);
2234 goto out;
2235 }
2236 }
2237
2238 /* bring ioc to operational state */
2239 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2240 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2241 CAN_SLEEP);
2242 if (recovery_state != 0)
2243 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2244 "error:[%x]\n", ioc->name, recovery_state);
2245 else
2246 printk(MYIOC_s_INFO_FMT
2247 "pci-resume: success\n", ioc->name);
2248 out:
2249 return 0;
2250
2251}
2252#endif
2253
2254static int
2255mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2256{
2257 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2258 ioc->bus_type != SPI) ||
2259 (MptDriverClass[index] == MPTFC_DRIVER &&
2260 ioc->bus_type != FC) ||
2261 (MptDriverClass[index] == MPTSAS_DRIVER &&
2262 ioc->bus_type != SAS))
2263 /* make sure we only call the relevant reset handler
2264 * for the bus */
2265 return 0;
2266 return (MptResetHandlers[index])(ioc, reset_phase);
2267}
2268
2269/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2270/**
2271 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2272 * @ioc: Pointer to MPT adapter structure
2273 * @reason: Event word / reason
2274 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2275 *
2276 * This routine performs all the steps necessary to bring the IOC
2277 * to a OPERATIONAL state.
2278 *
2279 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2280 * MPT adapter.
2281 *
2282 * Returns:
2283 * 0 for success
2284 * -1 if failed to get board READY
2285 * -2 if READY but IOCFacts Failed
2286 * -3 if READY but PrimeIOCFifos Failed
2287 * -4 if READY but IOCInit Failed
2288 * -5 if failed to enable_device and/or request_selected_regions
2289 * -6 if failed to upload firmware
2290 */
2291static int
2292mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2293{
2294 int hard_reset_done = 0;
2295 int alt_ioc_ready = 0;
2296 int hard;
2297 int rc=0;
2298 int ii;
2299 int ret = 0;
2300 int reset_alt_ioc_active = 0;
2301 int irq_allocated = 0;
2302 u8 *a;
2303
2304 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2305 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2306
2307 /* Disable reply interrupts (also blocks FreeQ) */
2308 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2309 ioc->active = 0;
2310
2311 if (ioc->alt_ioc) {
2312 if (ioc->alt_ioc->active ||
2313 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2314 reset_alt_ioc_active = 1;
2315 /* Disable alt-IOC's reply interrupts
2316 * (and FreeQ) for a bit
2317 **/
2318 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2319 0xFFFFFFFF);
2320 ioc->alt_ioc->active = 0;
2321 }
2322 }
2323
2324 hard = 1;
2325 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2326 hard = 0;
2327
2328 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2329 if (hard_reset_done == -4) {
2330 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2331 ioc->name);
2332
2333 if (reset_alt_ioc_active && ioc->alt_ioc) {
2334 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2335 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2336 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2337 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2338 ioc->alt_ioc->active = 1;
2339 }
2340
2341 } else {
2342 printk(MYIOC_s_WARN_FMT
2343 "NOT READY WARNING!\n", ioc->name);
2344 }
2345 ret = -1;
2346 goto out;
2347 }
2348
2349 /* hard_reset_done = 0 if a soft reset was performed
2350 * and 1 if a hard reset was performed.
2351 */
2352 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2353 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2354 alt_ioc_ready = 1;
2355 else
2356 printk(MYIOC_s_WARN_FMT
2357 ": alt-ioc Not ready WARNING!\n",
2358 ioc->alt_ioc->name);
2359 }
2360
2361 for (ii=0; ii<5; ii++) {
2362 /* Get IOC facts! Allow 5 retries */
2363 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2364 break;
2365 }
2366
2367
2368 if (ii == 5) {
2369 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2370 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2371 ret = -2;
2372 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2373 MptDisplayIocCapabilities(ioc);
2374 }
2375
2376 if (alt_ioc_ready) {
2377 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2378 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2379 "Initial Alt IocFacts failed rc=%x\n",
2380 ioc->name, rc));
2381 /* Retry - alt IOC was initialized once
2382 */
2383 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2384 }
2385 if (rc) {
2386 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2388 alt_ioc_ready = 0;
2389 reset_alt_ioc_active = 0;
2390 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2391 MptDisplayIocCapabilities(ioc->alt_ioc);
2392 }
2393 }
2394
2395 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2396 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2397 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2398 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2399 IORESOURCE_IO);
2400 if (pci_enable_device(ioc->pcidev))
2401 return -5;
2402 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2403 "mpt"))
2404 return -5;
2405 }
2406
2407 /*
2408 * Device is reset now. It must have de-asserted the interrupt line
2409 * (if it was asserted) and it should be safe to register for the
2410 * interrupt now.
2411 */
2412 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2413 ioc->pci_irq = -1;
2414 if (ioc->pcidev->irq) {
2415 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2416 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2417 ioc->name);
2418 else
2419 ioc->msi_enable = 0;
2420 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2421 IRQF_SHARED, ioc->name, ioc);
2422 if (rc < 0) {
2423 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2424 "interrupt %d!\n",
2425 ioc->name, ioc->pcidev->irq);
2426 if (ioc->msi_enable)
2427 pci_disable_msi(ioc->pcidev);
2428 ret = -EBUSY;
2429 goto out;
2430 }
2431 irq_allocated = 1;
2432 ioc->pci_irq = ioc->pcidev->irq;
2433 pci_set_master(ioc->pcidev); /* ?? */
2434 pci_set_drvdata(ioc->pcidev, ioc);
2435 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2436 "installed at interrupt %d\n", ioc->name,
2437 ioc->pcidev->irq));
2438 }
2439 }
2440
2441 /* Prime reply & request queues!
2442 * (mucho alloc's) Must be done prior to
2443 * init as upper addresses are needed for init.
2444 * If fails, continue with alt-ioc processing
2445 */
2446 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2447 ioc->name));
2448 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2449 ret = -3;
2450
2451 /* May need to check/upload firmware & data here!
2452 * If fails, continue with alt-ioc processing
2453 */
2454 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2455 ioc->name));
2456 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2457 ret = -4;
2458// NEW!
2459 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2460 printk(MYIOC_s_WARN_FMT
2461 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2462 ioc->alt_ioc->name, rc);
2463 alt_ioc_ready = 0;
2464 reset_alt_ioc_active = 0;
2465 }
2466
2467 if (alt_ioc_ready) {
2468 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2469 alt_ioc_ready = 0;
2470 reset_alt_ioc_active = 0;
2471 printk(MYIOC_s_WARN_FMT
2472 ": alt-ioc: (%d) init failure WARNING!\n",
2473 ioc->alt_ioc->name, rc);
2474 }
2475 }
2476
2477 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2478 if (ioc->upload_fw) {
2479 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2480 "firmware upload required!\n", ioc->name));
2481
2482 /* Controller is not operational, cannot do upload
2483 */
2484 if (ret == 0) {
2485 rc = mpt_do_upload(ioc, sleepFlag);
2486 if (rc == 0) {
2487 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2488 /*
2489 * Maintain only one pointer to FW memory
2490 * so there will not be two attempt to
2491 * downloadboot onboard dual function
2492 * chips (mpt_adapter_disable,
2493 * mpt_diag_reset)
2494 */
2495 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2496 "mpt_upload: alt_%s has cached_fw=%p \n",
2497 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2498 ioc->cached_fw = NULL;
2499 }
2500 } else {
2501 printk(MYIOC_s_WARN_FMT
2502 "firmware upload failure!\n", ioc->name);
2503 ret = -6;
2504 }
2505 }
2506 }
2507 }
2508
2509 /* Enable MPT base driver management of EventNotification
2510 * and EventAck handling.
2511 */
2512 if ((ret == 0) && (!ioc->facts.EventState)) {
2513 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2514 "SendEventNotification\n",
2515 ioc->name));
2516 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2517 }
2518
2519 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2520 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2521
2522 if (ret == 0) {
2523 /* Enable! (reply interrupt) */
2524 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2525 ioc->active = 1;
2526 }
2527 if (rc == 0) { /* alt ioc */
2528 if (reset_alt_ioc_active && ioc->alt_ioc) {
2529 /* (re)Enable alt-IOC! (reply interrupt) */
2530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2531 "reply irq re-enabled\n",
2532 ioc->alt_ioc->name));
2533 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2534 MPI_HIM_DIM);
2535 ioc->alt_ioc->active = 1;
2536 }
2537 }
2538
2539
2540 /* Add additional "reason" check before call to GetLanConfigPages
2541 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2542 * recursive scenario; GetLanConfigPages times out, timer expired
2543 * routine calls HardResetHandler, which calls into here again,
2544 * and we try GetLanConfigPages again...
2545 */
2546 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2547
2548 /*
2549 * Initialize link list for inactive raid volumes.
2550 */
2551 mutex_init(&ioc->raid_data.inactive_list_mutex);
2552 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2553
2554 switch (ioc->bus_type) {
2555
2556 case SAS:
2557 /* clear persistency table */
2558 if(ioc->facts.IOCExceptions &
2559 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2560 ret = mptbase_sas_persist_operation(ioc,
2561 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2562 if(ret != 0)
2563 goto out;
2564 }
2565
2566 /* Find IM volumes
2567 */
2568 mpt_findImVolumes(ioc);
2569
2570 /* Check, and possibly reset, the coalescing value
2571 */
2572 mpt_read_ioc_pg_1(ioc);
2573
2574 break;
2575
2576 case FC:
2577 if ((ioc->pfacts[0].ProtocolFlags &
2578 MPI_PORTFACTS_PROTOCOL_LAN) &&
2579 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2580 /*
2581 * Pre-fetch the ports LAN MAC address!
2582 * (LANPage1_t stuff)
2583 */
2584 (void) GetLanConfigPages(ioc);
2585 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2586 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2587 "LanAddr = %02X:%02X:%02X"
2588 ":%02X:%02X:%02X\n",
2589 ioc->name, a[5], a[4],
2590 a[3], a[2], a[1], a[0]));
2591 }
2592 break;
2593
2594 case SPI:
2595 /* Get NVRAM and adapter maximums from SPP 0 and 2
2596 */
2597 mpt_GetScsiPortSettings(ioc, 0);
2598
2599 /* Get version and length of SDP 1
2600 */
2601 mpt_readScsiDevicePageHeaders(ioc, 0);
2602
2603 /* Find IM volumes
2604 */
2605 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2606 mpt_findImVolumes(ioc);
2607
2608 /* Check, and possibly reset, the coalescing value
2609 */
2610 mpt_read_ioc_pg_1(ioc);
2611
2612 mpt_read_ioc_pg_4(ioc);
2613
2614 break;
2615 }
2616
2617 GetIoUnitPage2(ioc);
2618 mpt_get_manufacturing_pg_0(ioc);
2619 }
2620
2621 out:
2622 if ((ret != 0) && irq_allocated) {
2623 free_irq(ioc->pci_irq, ioc);
2624 if (ioc->msi_enable)
2625 pci_disable_msi(ioc->pcidev);
2626 }
2627 return ret;
2628}
2629
2630/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2631/**
2632 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2633 * @ioc: Pointer to MPT adapter structure
2634 * @pdev: Pointer to (struct pci_dev) structure
2635 *
2636 * Search for PCI bus/dev_function which matches
2637 * PCI bus/dev_function (+/-1) for newly discovered 929,
2638 * 929X, 1030 or 1035.
2639 *
2640 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2641 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2642 */
2643static void
2644mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2645{
2646 struct pci_dev *peer=NULL;
2647 unsigned int slot = PCI_SLOT(pdev->devfn);
2648 unsigned int func = PCI_FUNC(pdev->devfn);
2649 MPT_ADAPTER *ioc_srch;
2650
2651 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2652 " searching for devfn match on %x or %x\n",
2653 ioc->name, pci_name(pdev), pdev->bus->number,
2654 pdev->devfn, func-1, func+1));
2655
2656 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2657 if (!peer) {
2658 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2659 if (!peer)
2660 return;
2661 }
2662
2663 list_for_each_entry(ioc_srch, &ioc_list, list) {
2664 struct pci_dev *_pcidev = ioc_srch->pcidev;
2665 if (_pcidev == peer) {
2666 /* Paranoia checks */
2667 if (ioc->alt_ioc != NULL) {
2668 printk(MYIOC_s_WARN_FMT
2669 "Oops, already bound (%s <==> %s)!\n",
2670 ioc->name, ioc->name, ioc->alt_ioc->name);
2671 break;
2672 } else if (ioc_srch->alt_ioc != NULL) {
2673 printk(MYIOC_s_WARN_FMT
2674 "Oops, already bound (%s <==> %s)!\n",
2675 ioc_srch->name, ioc_srch->name,
2676 ioc_srch->alt_ioc->name);
2677 break;
2678 }
2679 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2680 "FOUND! binding %s <==> %s\n",
2681 ioc->name, ioc->name, ioc_srch->name));
2682 ioc_srch->alt_ioc = ioc;
2683 ioc->alt_ioc = ioc_srch;
2684 }
2685 }
2686 pci_dev_put(peer);
2687}
2688
2689/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2690/**
2691 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2692 * @ioc: Pointer to MPT adapter structure
2693 */
2694static void
2695mpt_adapter_disable(MPT_ADAPTER *ioc)
2696{
2697 int sz;
2698 int ret;
2699
2700 if (ioc->cached_fw != NULL) {
2701 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2702 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2703 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2704 ioc->cached_fw, CAN_SLEEP)) < 0) {
2705 printk(MYIOC_s_WARN_FMT
2706 ": firmware downloadboot failure (%d)!\n",
2707 ioc->name, ret);
2708 }
2709 }
2710
2711 /*
2712 * Put the controller into ready state (if its not already)
2713 */
2714 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2715 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2716 CAN_SLEEP)) {
2717 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2718 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2719 "reset failed to put ioc in ready state!\n",
2720 ioc->name, __func__);
2721 } else
2722 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2723 "failed!\n", ioc->name, __func__);
2724 }
2725
2726
2727 /* Disable adapter interrupts! */
2728 synchronize_irq(ioc->pcidev->irq);
2729 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2730 ioc->active = 0;
2731
2732 /* Clear any lingering interrupt */
2733 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2734 CHIPREG_READ32(&ioc->chip->IntStatus);
2735
2736 if (ioc->alloc != NULL) {
2737 sz = ioc->alloc_sz;
2738 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2739 ioc->name, ioc->alloc, ioc->alloc_sz));
2740 pci_free_consistent(ioc->pcidev, sz,
2741 ioc->alloc, ioc->alloc_dma);
2742 ioc->reply_frames = NULL;
2743 ioc->req_frames = NULL;
2744 ioc->alloc = NULL;
2745 ioc->alloc_total -= sz;
2746 }
2747
2748 if (ioc->sense_buf_pool != NULL) {
2749 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2750 pci_free_consistent(ioc->pcidev, sz,
2751 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2752 ioc->sense_buf_pool = NULL;
2753 ioc->alloc_total -= sz;
2754 }
2755
2756 if (ioc->events != NULL){
2757 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2758 kfree(ioc->events);
2759 ioc->events = NULL;
2760 ioc->alloc_total -= sz;
2761 }
2762
2763 mpt_free_fw_memory(ioc);
2764
2765 kfree(ioc->spi_data.nvram);
2766 mpt_inactive_raid_list_free(ioc);
2767 kfree(ioc->raid_data.pIocPg2);
2768 kfree(ioc->raid_data.pIocPg3);
2769 ioc->spi_data.nvram = NULL;
2770 ioc->raid_data.pIocPg3 = NULL;
2771
2772 if (ioc->spi_data.pIocPg4 != NULL) {
2773 sz = ioc->spi_data.IocPg4Sz;
2774 pci_free_consistent(ioc->pcidev, sz,
2775 ioc->spi_data.pIocPg4,
2776 ioc->spi_data.IocPg4_dma);
2777 ioc->spi_data.pIocPg4 = NULL;
2778 ioc->alloc_total -= sz;
2779 }
2780
2781 if (ioc->ReqToChain != NULL) {
2782 kfree(ioc->ReqToChain);
2783 kfree(ioc->RequestNB);
2784 ioc->ReqToChain = NULL;
2785 }
2786
2787 kfree(ioc->ChainToChain);
2788 ioc->ChainToChain = NULL;
2789
2790 if (ioc->HostPageBuffer != NULL) {
2791 if((ret = mpt_host_page_access_control(ioc,
2792 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2793 printk(MYIOC_s_ERR_FMT
2794 ": %s: host page buffers free failed (%d)!\n",
2795 ioc->name, __func__, ret);
2796 }
2797 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2798 "HostPageBuffer free @ %p, sz=%d bytes\n",
2799 ioc->name, ioc->HostPageBuffer,
2800 ioc->HostPageBuffer_sz));
2801 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2802 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2803 ioc->HostPageBuffer = NULL;
2804 ioc->HostPageBuffer_sz = 0;
2805 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2806 }
2807
2808 pci_set_drvdata(ioc->pcidev, NULL);
2809}
2810/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2811/**
2812 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2813 * @ioc: Pointer to MPT adapter structure
2814 *
2815 * This routine unregisters h/w resources and frees all alloc'd memory
2816 * associated with a MPT adapter structure.
2817 */
2818static void
2819mpt_adapter_dispose(MPT_ADAPTER *ioc)
2820{
2821 int sz_first, sz_last;
2822
2823 if (ioc == NULL)
2824 return;
2825
2826 sz_first = ioc->alloc_total;
2827
2828 mpt_adapter_disable(ioc);
2829
2830 if (ioc->pci_irq != -1) {
2831 free_irq(ioc->pci_irq, ioc);
2832 if (ioc->msi_enable)
2833 pci_disable_msi(ioc->pcidev);
2834 ioc->pci_irq = -1;
2835 }
2836
2837 if (ioc->memmap != NULL) {
2838 iounmap(ioc->memmap);
2839 ioc->memmap = NULL;
2840 }
2841
2842 pci_disable_device(ioc->pcidev);
2843 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2844
2845 /* Zap the adapter lookup ptr! */
2846 list_del(&ioc->list);
2847
2848 sz_last = ioc->alloc_total;
2849 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2850 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2851
2852 if (ioc->alt_ioc)
2853 ioc->alt_ioc->alt_ioc = NULL;
2854
2855 kfree(ioc);
2856}
2857
2858/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2859/**
2860 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2861 * @ioc: Pointer to MPT adapter structure
2862 */
2863static void
2864MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2865{
2866 int i = 0;
2867
2868 printk(KERN_INFO "%s: ", ioc->name);
2869 if (ioc->prod_name)
2870 printk("%s: ", ioc->prod_name);
2871 printk("Capabilities={");
2872
2873 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2874 printk("Initiator");
2875 i++;
2876 }
2877
2878 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2879 printk("%sTarget", i ? "," : "");
2880 i++;
2881 }
2882
2883 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2884 printk("%sLAN", i ? "," : "");
2885 i++;
2886 }
2887
2888#if 0
2889 /*
2890 * This would probably evoke more questions than it's worth
2891 */
2892 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2893 printk("%sLogBusAddr", i ? "," : "");
2894 i++;
2895 }
2896#endif
2897
2898 printk("}\n");
2899}
2900
2901/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2902/**
2903 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2904 * @ioc: Pointer to MPT_ADAPTER structure
2905 * @force: Force hard KickStart of IOC
2906 * @sleepFlag: Specifies whether the process can sleep
2907 *
2908 * Returns:
2909 * 1 - DIAG reset and READY
2910 * 0 - READY initially OR soft reset and READY
2911 * -1 - Any failure on KickStart
2912 * -2 - Msg Unit Reset Failed
2913 * -3 - IO Unit Reset Failed
2914 * -4 - IOC owned by a PEER
2915 */
2916static int
2917MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2918{
2919 u32 ioc_state;
2920 int statefault = 0;
2921 int cntdn;
2922 int hard_reset_done = 0;
2923 int r;
2924 int ii;
2925 int whoinit;
2926
2927 /* Get current [raw] IOC state */
2928 ioc_state = mpt_GetIocState(ioc, 0);
2929 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2930
2931 /*
2932 * Check to see if IOC got left/stuck in doorbell handshake
2933 * grip of death. If so, hard reset the IOC.
2934 */
2935 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2936 statefault = 1;
2937 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2938 ioc->name);
2939 }
2940
2941 /* Is it already READY? */
2942 if (!statefault &&
2943 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2944 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2945 "IOC is in READY state\n", ioc->name));
2946 return 0;
2947 }
2948
2949 /*
2950 * Check to see if IOC is in FAULT state.
2951 */
2952 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2953 statefault = 2;
2954 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2955 ioc->name);
2956 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2957 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2958 }
2959
2960 /*
2961 * Hmmm... Did it get left operational?
2962 */
2963 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2964 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2965 ioc->name));
2966
2967 /* Check WhoInit.
2968 * If PCI Peer, exit.
2969 * Else, if no fault conditions are present, issue a MessageUnitReset
2970 * Else, fall through to KickStart case
2971 */
2972 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2973 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2974 "whoinit 0x%x statefault %d force %d\n",
2975 ioc->name, whoinit, statefault, force));
2976 if (whoinit == MPI_WHOINIT_PCI_PEER)
2977 return -4;
2978 else {
2979 if ((statefault == 0 ) && (force == 0)) {
2980 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2981 return 0;
2982 }
2983 statefault = 3;
2984 }
2985 }
2986
2987 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2988 if (hard_reset_done < 0)
2989 return -1;
2990
2991 /*
2992 * Loop here waiting for IOC to come READY.
2993 */
2994 ii = 0;
2995 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2996
2997 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2998 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2999 /*
3000 * BIOS or previous driver load left IOC in OP state.
3001 * Reset messaging FIFOs.
3002 */
3003 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3004 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3005 return -2;
3006 }
3007 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3008 /*
3009 * Something is wrong. Try to get IOC back
3010 * to a known state.
3011 */
3012 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3013 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3014 return -3;
3015 }
3016 }
3017
3018 ii++; cntdn--;
3019 if (!cntdn) {
3020 printk(MYIOC_s_ERR_FMT
3021 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3022 ioc->name, ioc_state, (int)((ii+5)/HZ));
3023 return -ETIME;
3024 }
3025
3026 if (sleepFlag == CAN_SLEEP) {
3027 msleep(1);
3028 } else {
3029 mdelay (1); /* 1 msec delay */
3030 }
3031
3032 }
3033
3034 if (statefault < 3) {
3035 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3036 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3037 }
3038
3039 return hard_reset_done;
3040}
3041
3042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3043/**
3044 * mpt_GetIocState - Get the current state of a MPT adapter.
3045 * @ioc: Pointer to MPT_ADAPTER structure
3046 * @cooked: Request raw or cooked IOC state
3047 *
3048 * Returns all IOC Doorbell register bits if cooked==0, else just the
3049 * Doorbell bits in MPI_IOC_STATE_MASK.
3050 */
3051u32
3052mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3053{
3054 u32 s, sc;
3055
3056 /* Get! */
3057 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3058 sc = s & MPI_IOC_STATE_MASK;
3059
3060 /* Save! */
3061 ioc->last_state = sc;
3062
3063 return cooked ? sc : s;
3064}
3065
3066/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3067/**
3068 * GetIocFacts - Send IOCFacts request to MPT adapter.
3069 * @ioc: Pointer to MPT_ADAPTER structure
3070 * @sleepFlag: Specifies whether the process can sleep
3071 * @reason: If recovery, only update facts.
3072 *
3073 * Returns 0 for success, non-zero for failure.
3074 */
3075static int
3076GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3077{
3078 IOCFacts_t get_facts;
3079 IOCFactsReply_t *facts;
3080 int r;
3081 int req_sz;
3082 int reply_sz;
3083 int sz;
3084 u32 status, vv;
3085 u8 shiftFactor=1;
3086
3087 /* IOC *must* NOT be in RESET state! */
3088 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3089 printk(KERN_ERR MYNAM
3090 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3091 ioc->name, ioc->last_state);
3092 return -44;
3093 }
3094
3095 facts = &ioc->facts;
3096
3097 /* Destination (reply area)... */
3098 reply_sz = sizeof(*facts);
3099 memset(facts, 0, reply_sz);
3100
3101 /* Request area (get_facts on the stack right now!) */
3102 req_sz = sizeof(get_facts);
3103 memset(&get_facts, 0, req_sz);
3104
3105 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3106 /* Assert: All other get_facts fields are zero! */
3107
3108 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3109 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3110 ioc->name, req_sz, reply_sz));
3111
3112 /* No non-zero fields in the get_facts request are greater than
3113 * 1 byte in size, so we can just fire it off as is.
3114 */
3115 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3116 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3117 if (r != 0)
3118 return r;
3119
3120 /*
3121 * Now byte swap (GRRR) the necessary fields before any further
3122 * inspection of reply contents.
3123 *
3124 * But need to do some sanity checks on MsgLength (byte) field
3125 * to make sure we don't zero IOC's req_sz!
3126 */
3127 /* Did we get a valid reply? */
3128 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3129 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3130 /*
3131 * If not been here, done that, save off first WhoInit value
3132 */
3133 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3134 ioc->FirstWhoInit = facts->WhoInit;
3135 }
3136
3137 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3138 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3139 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3140 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3141 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3142 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3143 /* CHECKME! IOCStatus, IOCLogInfo */
3144
3145 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3146 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3147
3148 /*
3149 * FC f/w version changed between 1.1 and 1.2
3150 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3151 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3152 */
3153 if (facts->MsgVersion < MPI_VERSION_01_02) {
3154 /*
3155 * Handle old FC f/w style, convert to new...
3156 */
3157 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3158 facts->FWVersion.Word =
3159 ((oldv<<12) & 0xFF000000) |
3160 ((oldv<<8) & 0x000FFF00);
3161 } else
3162 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3163
3164 facts->ProductID = le16_to_cpu(facts->ProductID);
3165
3166 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3167 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3168 ioc->ir_firmware = 1;
3169
3170 facts->CurrentHostMfaHighAddr =
3171 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3172 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3173 facts->CurrentSenseBufferHighAddr =
3174 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3175 facts->CurReplyFrameSize =
3176 le16_to_cpu(facts->CurReplyFrameSize);
3177 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3178
3179 /*
3180 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3181 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3182 * to 14 in MPI-1.01.0x.
3183 */
3184 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3185 facts->MsgVersion > MPI_VERSION_01_00) {
3186 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3187 }
3188
3189 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3190
3191 if (!facts->RequestFrameSize) {
3192 /* Something is wrong! */
3193 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3194 ioc->name);
3195 return -55;
3196 }
3197
3198 r = sz = facts->BlockSize;
3199 vv = ((63 / (sz * 4)) + 1) & 0x03;
3200 ioc->NB_for_64_byte_frame = vv;
3201 while ( sz )
3202 {
3203 shiftFactor++;
3204 sz = sz >> 1;
3205 }
3206 ioc->NBShiftFactor = shiftFactor;
3207 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3208 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3209 ioc->name, vv, shiftFactor, r));
3210
3211 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3212 /*
3213 * Set values for this IOC's request & reply frame sizes,
3214 * and request & reply queue depths...
3215 */
3216 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3217 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3218 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3219 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3220
3221 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3222 ioc->name, ioc->reply_sz, ioc->reply_depth));
3223 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3224 ioc->name, ioc->req_sz, ioc->req_depth));
3225
3226 /* Get port facts! */
3227 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3228 return r;
3229 }
3230 } else {
3231 printk(MYIOC_s_ERR_FMT
3232 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3233 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3234 RequestFrameSize)/sizeof(u32)));
3235 return -66;
3236 }
3237
3238 return 0;
3239}
3240
3241/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3242/**
3243 * GetPortFacts - Send PortFacts request to MPT adapter.
3244 * @ioc: Pointer to MPT_ADAPTER structure
3245 * @portnum: Port number
3246 * @sleepFlag: Specifies whether the process can sleep
3247 *
3248 * Returns 0 for success, non-zero for failure.
3249 */
3250static int
3251GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3252{
3253 PortFacts_t get_pfacts;
3254 PortFactsReply_t *pfacts;
3255 int ii;
3256 int req_sz;
3257 int reply_sz;
3258 int max_id;
3259
3260 /* IOC *must* NOT be in RESET state! */
3261 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3262 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3263 ioc->name, ioc->last_state );
3264 return -4;
3265 }
3266
3267 pfacts = &ioc->pfacts[portnum];
3268
3269 /* Destination (reply area)... */
3270 reply_sz = sizeof(*pfacts);
3271 memset(pfacts, 0, reply_sz);
3272
3273 /* Request area (get_pfacts on the stack right now!) */
3274 req_sz = sizeof(get_pfacts);
3275 memset(&get_pfacts, 0, req_sz);
3276
3277 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3278 get_pfacts.PortNumber = portnum;
3279 /* Assert: All other get_pfacts fields are zero! */
3280
3281 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3282 ioc->name, portnum));
3283
3284 /* No non-zero fields in the get_pfacts request are greater than
3285 * 1 byte in size, so we can just fire it off as is.
3286 */
3287 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3288 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3289 if (ii != 0)
3290 return ii;
3291
3292 /* Did we get a valid reply? */
3293
3294 /* Now byte swap the necessary fields in the response. */
3295 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3296 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3297 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3298 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3299 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3300 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3301 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3302 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3303 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3304
3305 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3306 pfacts->MaxDevices;
3307 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3308 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3309
3310 /*
3311 * Place all the devices on channels
3312 *
3313 * (for debuging)
3314 */
3315 if (mpt_channel_mapping) {
3316 ioc->devices_per_bus = 1;
3317 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3318 }
3319
3320 return 0;
3321}
3322
3323/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3324/**
3325 * SendIocInit - Send IOCInit request to MPT adapter.
3326 * @ioc: Pointer to MPT_ADAPTER structure
3327 * @sleepFlag: Specifies whether the process can sleep
3328 *
3329 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3330 *
3331 * Returns 0 for success, non-zero for failure.
3332 */
3333static int
3334SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3335{
3336 IOCInit_t ioc_init;
3337 MPIDefaultReply_t init_reply;
3338 u32 state;
3339 int r;
3340 int count;
3341 int cntdn;
3342
3343 memset(&ioc_init, 0, sizeof(ioc_init));
3344 memset(&init_reply, 0, sizeof(init_reply));
3345
3346 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3347 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3348
3349 /* If we are in a recovery mode and we uploaded the FW image,
3350 * then this pointer is not NULL. Skip the upload a second time.
3351 * Set this flag if cached_fw set for either IOC.
3352 */
3353 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3354 ioc->upload_fw = 1;
3355 else
3356 ioc->upload_fw = 0;
3357 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3358 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3359
3360 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3361 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3362
3363 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3364 ioc->name, ioc->facts.MsgVersion));
3365 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3366 // set MsgVersion and HeaderVersion host driver was built with
3367 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3368 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3369
3370 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3371 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3372 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3373 return -99;
3374 }
3375 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3376
3377 if (ioc->sg_addr_size == sizeof(u64)) {
3378 /* Save the upper 32-bits of the request
3379 * (reply) and sense buffers.
3380 */
3381 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3382 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3383 } else {
3384 /* Force 32-bit addressing */
3385 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3386 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3387 }
3388
3389 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3390 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3391 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3392 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3393
3394 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3395 ioc->name, &ioc_init));
3396
3397 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3398 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3399 if (r != 0) {
3400 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3401 return r;
3402 }
3403
3404 /* No need to byte swap the multibyte fields in the reply
3405 * since we don't even look at its contents.
3406 */
3407
3408 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3409 ioc->name, &ioc_init));
3410
3411 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3412 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3413 return r;
3414 }
3415
3416 /* YIKES! SUPER IMPORTANT!!!
3417 * Poll IocState until _OPERATIONAL while IOC is doing
3418 * LoopInit and TargetDiscovery!
3419 */
3420 count = 0;
3421 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3422 state = mpt_GetIocState(ioc, 1);
3423 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3424 if (sleepFlag == CAN_SLEEP) {
3425 msleep(1);
3426 } else {
3427 mdelay(1);
3428 }
3429
3430 if (!cntdn) {
3431 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3432 ioc->name, (int)((count+5)/HZ));
3433 return -9;
3434 }
3435
3436 state = mpt_GetIocState(ioc, 1);
3437 count++;
3438 }
3439 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3440 ioc->name, count));
3441
3442 ioc->aen_event_read_flag=0;
3443 return r;
3444}
3445
3446/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3447/**
3448 * SendPortEnable - Send PortEnable request to MPT adapter port.
3449 * @ioc: Pointer to MPT_ADAPTER structure
3450 * @portnum: Port number to enable
3451 * @sleepFlag: Specifies whether the process can sleep
3452 *
3453 * Send PortEnable to bring IOC to OPERATIONAL state.
3454 *
3455 * Returns 0 for success, non-zero for failure.
3456 */
3457static int
3458SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3459{
3460 PortEnable_t port_enable;
3461 MPIDefaultReply_t reply_buf;
3462 int rc;
3463 int req_sz;
3464 int reply_sz;
3465
3466 /* Destination... */
3467 reply_sz = sizeof(MPIDefaultReply_t);
3468 memset(&reply_buf, 0, reply_sz);
3469
3470 req_sz = sizeof(PortEnable_t);
3471 memset(&port_enable, 0, req_sz);
3472
3473 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3474 port_enable.PortNumber = portnum;
3475/* port_enable.ChainOffset = 0; */
3476/* port_enable.MsgFlags = 0; */
3477/* port_enable.MsgContext = 0; */
3478
3479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3480 ioc->name, portnum, &port_enable));
3481
3482 /* RAID FW may take a long time to enable
3483 */
3484 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3485 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3486 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3487 300 /*seconds*/, sleepFlag);
3488 } else {
3489 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3490 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3491 30 /*seconds*/, sleepFlag);
3492 }
3493 return rc;
3494}
3495
3496/**
3497 * mpt_alloc_fw_memory - allocate firmware memory
3498 * @ioc: Pointer to MPT_ADAPTER structure
3499 * @size: total FW bytes
3500 *
3501 * If memory has already been allocated, the same (cached) value
3502 * is returned.
3503 *
3504 * Return 0 if successful, or non-zero for failure
3505 **/
3506int
3507mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3508{
3509 int rc;
3510
3511 if (ioc->cached_fw) {
3512 rc = 0; /* use already allocated memory */
3513 goto out;
3514 }
3515 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3516 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3517 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3518 rc = 0;
3519 goto out;
3520 }
3521 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3522 if (!ioc->cached_fw) {
3523 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3524 ioc->name);
3525 rc = -1;
3526 } else {
3527 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3528 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3529 ioc->alloc_total += size;
3530 rc = 0;
3531 }
3532 out:
3533 return rc;
3534}
3535
3536/**
3537 * mpt_free_fw_memory - free firmware memory
3538 * @ioc: Pointer to MPT_ADAPTER structure
3539 *
3540 * If alt_img is NULL, delete from ioc structure.
3541 * Else, delete a secondary image in same format.
3542 **/
3543void
3544mpt_free_fw_memory(MPT_ADAPTER *ioc)
3545{
3546 int sz;
3547
3548 if (!ioc->cached_fw)
3549 return;
3550
3551 sz = ioc->facts.FWImageSize;
3552 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3553 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3554 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3555 ioc->alloc_total -= sz;
3556 ioc->cached_fw = NULL;
3557}
3558
3559/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3560/**
3561 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3562 * @ioc: Pointer to MPT_ADAPTER structure
3563 * @sleepFlag: Specifies whether the process can sleep
3564 *
3565 * Returns 0 for success, >0 for handshake failure
3566 * <0 for fw upload failure.
3567 *
3568 * Remark: If bound IOC and a successful FWUpload was performed
3569 * on the bound IOC, the second image is discarded
3570 * and memory is free'd. Both channels must upload to prevent
3571 * IOC from running in degraded mode.
3572 */
3573static int
3574mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3575{
3576 u8 reply[sizeof(FWUploadReply_t)];
3577 FWUpload_t *prequest;
3578 FWUploadReply_t *preply;
3579 FWUploadTCSGE_t *ptcsge;
3580 u32 flagsLength;
3581 int ii, sz, reply_sz;
3582 int cmdStatus;
3583 int request_size;
3584 /* If the image size is 0, we are done.
3585 */
3586 if ((sz = ioc->facts.FWImageSize) == 0)
3587 return 0;
3588
3589 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3590 return -ENOMEM;
3591
3592 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3593 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3594
3595 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3596 kzalloc(ioc->req_sz, GFP_KERNEL);
3597 if (!prequest) {
3598 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3599 "while allocating memory \n", ioc->name));
3600 mpt_free_fw_memory(ioc);
3601 return -ENOMEM;
3602 }
3603
3604 preply = (FWUploadReply_t *)&reply;
3605
3606 reply_sz = sizeof(reply);
3607 memset(preply, 0, reply_sz);
3608
3609 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3610 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3611
3612 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3613 ptcsge->DetailsLength = 12;
3614 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3615 ptcsge->ImageSize = cpu_to_le32(sz);
3616 ptcsge++;
3617
3618 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3619 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3620 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3621 ioc->SGE_size;
3622 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3623 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3624 ioc->facts.FWImageSize, request_size));
3625 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3626
3627 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3628 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3629
3630 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3631 "rc=%x \n", ioc->name, ii));
3632
3633 cmdStatus = -EFAULT;
3634 if (ii == 0) {
3635 /* Handshake transfer was complete and successful.
3636 * Check the Reply Frame.
3637 */
3638 int status;
3639 status = le16_to_cpu(preply->IOCStatus) &
3640 MPI_IOCSTATUS_MASK;
3641 if (status == MPI_IOCSTATUS_SUCCESS &&
3642 ioc->facts.FWImageSize ==
3643 le32_to_cpu(preply->ActualImageSize))
3644 cmdStatus = 0;
3645 }
3646 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3647 ioc->name, cmdStatus));
3648
3649
3650 if (cmdStatus) {
3651 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3652 "freeing image \n", ioc->name));
3653 mpt_free_fw_memory(ioc);
3654 }
3655 kfree(prequest);
3656
3657 return cmdStatus;
3658}
3659
3660/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3661/**
3662 * mpt_downloadboot - DownloadBoot code
3663 * @ioc: Pointer to MPT_ADAPTER structure
3664 * @pFwHeader: Pointer to firmware header info
3665 * @sleepFlag: Specifies whether the process can sleep
3666 *
3667 * FwDownloadBoot requires Programmed IO access.
3668 *
3669 * Returns 0 for success
3670 * -1 FW Image size is 0
3671 * -2 No valid cached_fw Pointer
3672 * <0 for fw upload failure.
3673 */
3674static int
3675mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3676{
3677 MpiExtImageHeader_t *pExtImage;
3678 u32 fwSize;
3679 u32 diag0val;
3680 int count;
3681 u32 *ptrFw;
3682 u32 diagRwData;
3683 u32 nextImage;
3684 u32 load_addr;
3685 u32 ioc_state=0;
3686
3687 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3688 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3689
3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3691 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3692 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3693 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3696
3697 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3698
3699 /* wait 1 msec */
3700 if (sleepFlag == CAN_SLEEP) {
3701 msleep(1);
3702 } else {
3703 mdelay (1);
3704 }
3705
3706 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3707 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3708
3709 for (count = 0; count < 30; count ++) {
3710 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3711 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3712 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3713 ioc->name, count));
3714 break;
3715 }
3716 /* wait .1 sec */
3717 if (sleepFlag == CAN_SLEEP) {
3718 msleep (100);
3719 } else {
3720 mdelay (100);
3721 }
3722 }
3723
3724 if ( count == 30 ) {
3725 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3726 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3727 ioc->name, diag0val));
3728 return -3;
3729 }
3730
3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3732 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3733 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3734 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3737
3738 /* Set the DiagRwEn and Disable ARM bits */
3739 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3740
3741 fwSize = (pFwHeader->ImageSize + 3)/4;
3742 ptrFw = (u32 *) pFwHeader;
3743
3744 /* Write the LoadStartAddress to the DiagRw Address Register
3745 * using Programmed IO
3746 */
3747 if (ioc->errata_flag_1064)
3748 pci_enable_io_access(ioc->pcidev);
3749
3750 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3751 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3752 ioc->name, pFwHeader->LoadStartAddress));
3753
3754 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3755 ioc->name, fwSize*4, ptrFw));
3756 while (fwSize--) {
3757 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3758 }
3759
3760 nextImage = pFwHeader->NextImageHeaderOffset;
3761 while (nextImage) {
3762 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3763
3764 load_addr = pExtImage->LoadStartAddress;
3765
3766 fwSize = (pExtImage->ImageSize + 3) >> 2;
3767 ptrFw = (u32 *)pExtImage;
3768
3769 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3770 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3771 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3772
3773 while (fwSize--) {
3774 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3775 }
3776 nextImage = pExtImage->NextImageHeaderOffset;
3777 }
3778
3779 /* Write the IopResetVectorRegAddr */
3780 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3781 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3782
3783 /* Write the IopResetVectorValue */
3784 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3786
3787 /* Clear the internal flash bad bit - autoincrementing register,
3788 * so must do two writes.
3789 */
3790 if (ioc->bus_type == SPI) {
3791 /*
3792 * 1030 and 1035 H/W errata, workaround to access
3793 * the ClearFlashBadSignatureBit
3794 */
3795 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3796 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3797 diagRwData |= 0x40000000;
3798 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3799 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3800
3801 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3802 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3803 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3804 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3805
3806 /* wait 1 msec */
3807 if (sleepFlag == CAN_SLEEP) {
3808 msleep (1);
3809 } else {
3810 mdelay (1);
3811 }
3812 }
3813
3814 if (ioc->errata_flag_1064)
3815 pci_disable_io_access(ioc->pcidev);
3816
3817 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3818 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3819 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3820 ioc->name, diag0val));
3821 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3822 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3823 ioc->name, diag0val));
3824 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3825
3826 /* Write 0xFF to reset the sequencer */
3827 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3828
3829 if (ioc->bus_type == SAS) {
3830 ioc_state = mpt_GetIocState(ioc, 0);
3831 if ( (GetIocFacts(ioc, sleepFlag,
3832 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3833 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3834 ioc->name, ioc_state));
3835 return -EFAULT;
3836 }
3837 }
3838
3839 for (count=0; count<HZ*20; count++) {
3840 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3841 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3842 "downloadboot successful! (count=%d) IocState=%x\n",
3843 ioc->name, count, ioc_state));
3844 if (ioc->bus_type == SAS) {
3845 return 0;
3846 }
3847 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3848 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3849 "downloadboot: SendIocInit failed\n",
3850 ioc->name));
3851 return -EFAULT;
3852 }
3853 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3854 "downloadboot: SendIocInit successful\n",
3855 ioc->name));
3856 return 0;
3857 }
3858 if (sleepFlag == CAN_SLEEP) {
3859 msleep (10);
3860 } else {
3861 mdelay (10);
3862 }
3863 }
3864 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3865 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3866 return -EFAULT;
3867}
3868
3869/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3870/**
3871 * KickStart - Perform hard reset of MPT adapter.
3872 * @ioc: Pointer to MPT_ADAPTER structure
3873 * @force: Force hard reset
3874 * @sleepFlag: Specifies whether the process can sleep
3875 *
3876 * This routine places MPT adapter in diagnostic mode via the
3877 * WriteSequence register, and then performs a hard reset of adapter
3878 * via the Diagnostic register.
3879 *
3880 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3881 * or NO_SLEEP (interrupt thread, use mdelay)
3882 * force - 1 if doorbell active, board fault state
3883 * board operational, IOC_RECOVERY or
3884 * IOC_BRINGUP and there is an alt_ioc.
3885 * 0 else
3886 *
3887 * Returns:
3888 * 1 - hard reset, READY
3889 * 0 - no reset due to History bit, READY
3890 * -1 - no reset due to History bit but not READY
3891 * OR reset but failed to come READY
3892 * -2 - no reset, could not enter DIAG mode
3893 * -3 - reset but bad FW bit
3894 */
3895static int
3896KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3897{
3898 int hard_reset_done = 0;
3899 u32 ioc_state=0;
3900 int cnt,cntdn;
3901
3902 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3903 if (ioc->bus_type == SPI) {
3904 /* Always issue a Msg Unit Reset first. This will clear some
3905 * SCSI bus hang conditions.
3906 */
3907 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3908
3909 if (sleepFlag == CAN_SLEEP) {
3910 msleep (1000);
3911 } else {
3912 mdelay (1000);
3913 }
3914 }
3915
3916 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3917 if (hard_reset_done < 0)
3918 return hard_reset_done;
3919
3920 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3921 ioc->name));
3922
3923 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3924 for (cnt=0; cnt<cntdn; cnt++) {
3925 ioc_state = mpt_GetIocState(ioc, 1);
3926 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3927 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3928 ioc->name, cnt));
3929 return hard_reset_done;
3930 }
3931 if (sleepFlag == CAN_SLEEP) {
3932 msleep (10);
3933 } else {
3934 mdelay (10);
3935 }
3936 }
3937
3938 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3939 ioc->name, mpt_GetIocState(ioc, 0)));
3940 return -1;
3941}
3942
3943/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3944/**
3945 * mpt_diag_reset - Perform hard reset of the adapter.
3946 * @ioc: Pointer to MPT_ADAPTER structure
3947 * @ignore: Set if to honor and clear to ignore
3948 * the reset history bit
3949 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3950 * else set to NO_SLEEP (use mdelay instead)
3951 *
3952 * This routine places the adapter in diagnostic mode via the
3953 * WriteSequence register and then performs a hard reset of adapter
3954 * via the Diagnostic register. Adapter should be in ready state
3955 * upon successful completion.
3956 *
3957 * Returns: 1 hard reset successful
3958 * 0 no reset performed because reset history bit set
3959 * -2 enabling diagnostic mode failed
3960 * -3 diagnostic reset failed
3961 */
3962static int
3963mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3964{
3965 u32 diag0val;
3966 u32 doorbell;
3967 int hard_reset_done = 0;
3968 int count = 0;
3969 u32 diag1val = 0;
3970 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3971 u8 cb_idx;
3972
3973 /* Clear any existing interrupts */
3974 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3975
3976 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3977
3978 if (!ignore)
3979 return 0;
3980
3981 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3982 "address=%p\n", ioc->name, __func__,
3983 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3984 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3985 if (sleepFlag == CAN_SLEEP)
3986 msleep(1);
3987 else
3988 mdelay(1);
3989
3990 /*
3991 * Call each currently registered protocol IOC reset handler
3992 * with pre-reset indication.
3993 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3994 * MptResetHandlers[] registered yet.
3995 */
3996 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3997 if (MptResetHandlers[cb_idx])
3998 (*(MptResetHandlers[cb_idx]))(ioc,
3999 MPT_IOC_PRE_RESET);
4000 }
4001
4002 for (count = 0; count < 60; count ++) {
4003 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4004 doorbell &= MPI_IOC_STATE_MASK;
4005
4006 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4007 "looking for READY STATE: doorbell=%x"
4008 " count=%d\n",
4009 ioc->name, doorbell, count));
4010
4011 if (doorbell == MPI_IOC_STATE_READY) {
4012 return 1;
4013 }
4014
4015 /* wait 1 sec */
4016 if (sleepFlag == CAN_SLEEP)
4017 msleep(1000);
4018 else
4019 mdelay(1000);
4020 }
4021 return -1;
4022 }
4023
4024 /* Use "Diagnostic reset" method! (only thing available!) */
4025 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4026
4027 if (ioc->debug_level & MPT_DEBUG) {
4028 if (ioc->alt_ioc)
4029 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4030 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4031 ioc->name, diag0val, diag1val));
4032 }
4033
4034 /* Do the reset if we are told to ignore the reset history
4035 * or if the reset history is 0
4036 */
4037 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4038 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4039 /* Write magic sequence to WriteSequence register
4040 * Loop until in diagnostic mode
4041 */
4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4043 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4044 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4045 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4048
4049 /* wait 100 msec */
4050 if (sleepFlag == CAN_SLEEP) {
4051 msleep (100);
4052 } else {
4053 mdelay (100);
4054 }
4055
4056 count++;
4057 if (count > 20) {
4058 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4059 ioc->name, diag0val);
4060 return -2;
4061
4062 }
4063
4064 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4065
4066 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4067 ioc->name, diag0val));
4068 }
4069
4070 if (ioc->debug_level & MPT_DEBUG) {
4071 if (ioc->alt_ioc)
4072 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4073 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4074 ioc->name, diag0val, diag1val));
4075 }
4076 /*
4077 * Disable the ARM (Bug fix)
4078 *
4079 */
4080 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4081 mdelay(1);
4082
4083 /*
4084 * Now hit the reset bit in the Diagnostic register
4085 * (THE BIG HAMMER!) (Clears DRWE bit).
4086 */
4087 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4088 hard_reset_done = 1;
4089 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4090 ioc->name));
4091
4092 /*
4093 * Call each currently registered protocol IOC reset handler
4094 * with pre-reset indication.
4095 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4096 * MptResetHandlers[] registered yet.
4097 */
4098 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4099 if (MptResetHandlers[cb_idx]) {
4100 mpt_signal_reset(cb_idx,
4101 ioc, MPT_IOC_PRE_RESET);
4102 if (ioc->alt_ioc) {
4103 mpt_signal_reset(cb_idx,
4104 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4105 }
4106 }
4107 }
4108
4109 if (ioc->cached_fw)
4110 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4111 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4112 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4113 else
4114 cached_fw = NULL;
4115 if (cached_fw) {
4116 /* If the DownloadBoot operation fails, the
4117 * IOC will be left unusable. This is a fatal error
4118 * case. _diag_reset will return < 0
4119 */
4120 for (count = 0; count < 30; count ++) {
4121 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4122 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4123 break;
4124 }
4125
4126 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4127 ioc->name, diag0val, count));
4128 /* wait 1 sec */
4129 if (sleepFlag == CAN_SLEEP) {
4130 msleep (1000);
4131 } else {
4132 mdelay (1000);
4133 }
4134 }
4135 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4136 printk(MYIOC_s_WARN_FMT
4137 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4138 }
4139
4140 } else {
4141 /* Wait for FW to reload and for board
4142 * to go to the READY state.
4143 * Maximum wait is 60 seconds.
4144 * If fail, no error will check again
4145 * with calling program.
4146 */
4147 for (count = 0; count < 60; count ++) {
4148 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4149 doorbell &= MPI_IOC_STATE_MASK;
4150
4151 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4152 "looking for READY STATE: doorbell=%x"
4153 " count=%d\n", ioc->name, doorbell, count));
4154
4155 if (doorbell == MPI_IOC_STATE_READY) {
4156 break;
4157 }
4158
4159 /* wait 1 sec */
4160 if (sleepFlag == CAN_SLEEP) {
4161 msleep (1000);
4162 } else {
4163 mdelay (1000);
4164 }
4165 }
4166
4167 if (doorbell != MPI_IOC_STATE_READY)
4168 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4169 "after reset! IocState=%x", ioc->name,
4170 doorbell);
4171 }
4172 }
4173
4174 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4175 if (ioc->debug_level & MPT_DEBUG) {
4176 if (ioc->alt_ioc)
4177 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4178 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4179 ioc->name, diag0val, diag1val));
4180 }
4181
4182 /* Clear RESET_HISTORY bit! Place board in the
4183 * diagnostic mode to update the diag register.
4184 */
4185 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4186 count = 0;
4187 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4188 /* Write magic sequence to WriteSequence register
4189 * Loop until in diagnostic mode
4190 */
4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4197
4198 /* wait 100 msec */
4199 if (sleepFlag == CAN_SLEEP) {
4200 msleep (100);
4201 } else {
4202 mdelay (100);
4203 }
4204
4205 count++;
4206 if (count > 20) {
4207 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4208 ioc->name, diag0val);
4209 break;
4210 }
4211 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4212 }
4213 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4214 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4215 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4216 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4217 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4218 ioc->name);
4219 }
4220
4221 /* Disable Diagnostic Mode
4222 */
4223 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4224
4225 /* Check FW reload status flags.
4226 */
4227 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4228 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4229 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4230 ioc->name, diag0val);
4231 return -3;
4232 }
4233
4234 if (ioc->debug_level & MPT_DEBUG) {
4235 if (ioc->alt_ioc)
4236 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4237 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4238 ioc->name, diag0val, diag1val));
4239 }
4240
4241 /*
4242 * Reset flag that says we've enabled event notification
4243 */
4244 ioc->facts.EventState = 0;
4245
4246 if (ioc->alt_ioc)
4247 ioc->alt_ioc->facts.EventState = 0;
4248
4249 return hard_reset_done;
4250}
4251
4252/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4253/**
4254 * SendIocReset - Send IOCReset request to MPT adapter.
4255 * @ioc: Pointer to MPT_ADAPTER structure
4256 * @reset_type: reset type, expected values are
4257 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4258 * @sleepFlag: Specifies whether the process can sleep
4259 *
4260 * Send IOCReset request to the MPT adapter.
4261 *
4262 * Returns 0 for success, non-zero for failure.
4263 */
4264static int
4265SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4266{
4267 int r;
4268 u32 state;
4269 int cntdn, count;
4270
4271 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4272 ioc->name, reset_type));
4273 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4274 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4275 return r;
4276
4277 /* FW ACK'd request, wait for READY state
4278 */
4279 count = 0;
4280 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4281
4282 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4283 cntdn--;
4284 count++;
4285 if (!cntdn) {
4286 if (sleepFlag != CAN_SLEEP)
4287 count *= 10;
4288
4289 printk(MYIOC_s_ERR_FMT
4290 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4291 ioc->name, state, (int)((count+5)/HZ));
4292 return -ETIME;
4293 }
4294
4295 if (sleepFlag == CAN_SLEEP) {
4296 msleep(1);
4297 } else {
4298 mdelay (1); /* 1 msec delay */
4299 }
4300 }
4301
4302 /* TODO!
4303 * Cleanup all event stuff for this IOC; re-issue EventNotification
4304 * request if needed.
4305 */
4306 if (ioc->facts.Function)
4307 ioc->facts.EventState = 0;
4308
4309 return 0;
4310}
4311
4312/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4313/**
4314 * initChainBuffers - Allocate memory for and initialize chain buffers
4315 * @ioc: Pointer to MPT_ADAPTER structure
4316 *
4317 * Allocates memory for and initializes chain buffers,
4318 * chain buffer control arrays and spinlock.
4319 */
4320static int
4321initChainBuffers(MPT_ADAPTER *ioc)
4322{
4323 u8 *mem;
4324 int sz, ii, num_chain;
4325 int scale, num_sge, numSGE;
4326
4327 /* ReqToChain size must equal the req_depth
4328 * index = req_idx
4329 */
4330 if (ioc->ReqToChain == NULL) {
4331 sz = ioc->req_depth * sizeof(int);
4332 mem = kmalloc(sz, GFP_ATOMIC);
4333 if (mem == NULL)
4334 return -1;
4335
4336 ioc->ReqToChain = (int *) mem;
4337 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4338 ioc->name, mem, sz));
4339 mem = kmalloc(sz, GFP_ATOMIC);
4340 if (mem == NULL)
4341 return -1;
4342
4343 ioc->RequestNB = (int *) mem;
4344 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4345 ioc->name, mem, sz));
4346 }
4347 for (ii = 0; ii < ioc->req_depth; ii++) {
4348 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4349 }
4350
4351 /* ChainToChain size must equal the total number
4352 * of chain buffers to be allocated.
4353 * index = chain_idx
4354 *
4355 * Calculate the number of chain buffers needed(plus 1) per I/O
4356 * then multiply the maximum number of simultaneous cmds
4357 *
4358 * num_sge = num sge in request frame + last chain buffer
4359 * scale = num sge per chain buffer if no chain element
4360 */
4361 scale = ioc->req_sz / ioc->SGE_size;
4362 if (ioc->sg_addr_size == sizeof(u64))
4363 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4364 else
4365 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4366
4367 if (ioc->sg_addr_size == sizeof(u64)) {
4368 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4369 (ioc->req_sz - 60) / ioc->SGE_size;
4370 } else {
4371 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4372 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4373 }
4374 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4375 ioc->name, num_sge, numSGE));
4376
4377 if (ioc->bus_type == FC) {
4378 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4379 numSGE = MPT_SCSI_FC_SG_DEPTH;
4380 } else {
4381 if (numSGE > MPT_SCSI_SG_DEPTH)
4382 numSGE = MPT_SCSI_SG_DEPTH;
4383 }
4384
4385 num_chain = 1;
4386 while (numSGE - num_sge > 0) {
4387 num_chain++;
4388 num_sge += (scale - 1);
4389 }
4390 num_chain++;
4391
4392 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4393 ioc->name, numSGE, num_sge, num_chain));
4394
4395 if (ioc->bus_type == SPI)
4396 num_chain *= MPT_SCSI_CAN_QUEUE;
4397 else if (ioc->bus_type == SAS)
4398 num_chain *= MPT_SAS_CAN_QUEUE;
4399 else
4400 num_chain *= MPT_FC_CAN_QUEUE;
4401
4402 ioc->num_chain = num_chain;
4403
4404 sz = num_chain * sizeof(int);
4405 if (ioc->ChainToChain == NULL) {
4406 mem = kmalloc(sz, GFP_ATOMIC);
4407 if (mem == NULL)
4408 return -1;
4409
4410 ioc->ChainToChain = (int *) mem;
4411 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4412 ioc->name, mem, sz));
4413 } else {
4414 mem = (u8 *) ioc->ChainToChain;
4415 }
4416 memset(mem, 0xFF, sz);
4417 return num_chain;
4418}
4419
4420/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4421/**
4422 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4423 * @ioc: Pointer to MPT_ADAPTER structure
4424 *
4425 * This routine allocates memory for the MPT reply and request frame
4426 * pools (if necessary), and primes the IOC reply FIFO with
4427 * reply frames.
4428 *
4429 * Returns 0 for success, non-zero for failure.
4430 */
4431static int
4432PrimeIocFifos(MPT_ADAPTER *ioc)
4433{
4434 MPT_FRAME_HDR *mf;
4435 unsigned long flags;
4436 dma_addr_t alloc_dma;
4437 u8 *mem;
4438 int i, reply_sz, sz, total_size, num_chain;
4439 u64 dma_mask;
4440
4441 dma_mask = 0;
4442
4443 /* Prime reply FIFO... */
4444
4445 if (ioc->reply_frames == NULL) {
4446 if ( (num_chain = initChainBuffers(ioc)) < 0)
4447 return -1;
4448 /*
4449 * 1078 errata workaround for the 36GB limitation
4450 */
4451 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4452 ioc->dma_mask > DMA_BIT_MASK(35)) {
4453 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4454 && !pci_set_consistent_dma_mask(ioc->pcidev,
4455 DMA_BIT_MASK(32))) {
4456 dma_mask = DMA_BIT_MASK(35);
4457 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4458 "setting 35 bit addressing for "
4459 "Request/Reply/Chain and Sense Buffers\n",
4460 ioc->name));
4461 } else {
4462 /*Reseting DMA mask to 64 bit*/
4463 pci_set_dma_mask(ioc->pcidev,
4464 DMA_BIT_MASK(64));
4465 pci_set_consistent_dma_mask(ioc->pcidev,
4466 DMA_BIT_MASK(64));
4467
4468 printk(MYIOC_s_ERR_FMT
4469 "failed setting 35 bit addressing for "
4470 "Request/Reply/Chain and Sense Buffers\n",
4471 ioc->name);
4472 return -1;
4473 }
4474 }
4475
4476 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4478 ioc->name, ioc->reply_sz, ioc->reply_depth));
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4480 ioc->name, reply_sz, reply_sz));
4481
4482 sz = (ioc->req_sz * ioc->req_depth);
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4484 ioc->name, ioc->req_sz, ioc->req_depth));
4485 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4486 ioc->name, sz, sz));
4487 total_size += sz;
4488
4489 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4490 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4491 ioc->name, ioc->req_sz, num_chain));
4492 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4493 ioc->name, sz, sz, num_chain));
4494
4495 total_size += sz;
4496 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4497 if (mem == NULL) {
4498 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4499 ioc->name);
4500 goto out_fail;
4501 }
4502
4503 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4504 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4505
4506 memset(mem, 0, total_size);
4507 ioc->alloc_total += total_size;
4508 ioc->alloc = mem;
4509 ioc->alloc_dma = alloc_dma;
4510 ioc->alloc_sz = total_size;
4511 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4512 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4513
4514 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4515 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4516
4517 alloc_dma += reply_sz;
4518 mem += reply_sz;
4519
4520 /* Request FIFO - WE manage this! */
4521
4522 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4523 ioc->req_frames_dma = alloc_dma;
4524
4525 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4526 ioc->name, mem, (void *)(ulong)alloc_dma));
4527
4528 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4529
4530 for (i = 0; i < ioc->req_depth; i++) {
4531 alloc_dma += ioc->req_sz;
4532 mem += ioc->req_sz;
4533 }
4534
4535 ioc->ChainBuffer = mem;
4536 ioc->ChainBufferDMA = alloc_dma;
4537
4538 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4539 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4540
4541 /* Initialize the free chain Q.
4542 */
4543
4544 INIT_LIST_HEAD(&ioc->FreeChainQ);
4545
4546 /* Post the chain buffers to the FreeChainQ.
4547 */
4548 mem = (u8 *)ioc->ChainBuffer;
4549 for (i=0; i < num_chain; i++) {
4550 mf = (MPT_FRAME_HDR *) mem;
4551 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4552 mem += ioc->req_sz;
4553 }
4554
4555 /* Initialize Request frames linked list
4556 */
4557 alloc_dma = ioc->req_frames_dma;
4558 mem = (u8 *) ioc->req_frames;
4559
4560 spin_lock_irqsave(&ioc->FreeQlock, flags);
4561 INIT_LIST_HEAD(&ioc->FreeQ);
4562 for (i = 0; i < ioc->req_depth; i++) {
4563 mf = (MPT_FRAME_HDR *) mem;
4564
4565 /* Queue REQUESTs *internally*! */
4566 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4567
4568 mem += ioc->req_sz;
4569 }
4570 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4571
4572 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4573 ioc->sense_buf_pool =
4574 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4575 if (ioc->sense_buf_pool == NULL) {
4576 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4577 ioc->name);
4578 goto out_fail;
4579 }
4580
4581 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4582 ioc->alloc_total += sz;
4583 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4584 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4585
4586 }
4587
4588 /* Post Reply frames to FIFO
4589 */
4590 alloc_dma = ioc->alloc_dma;
4591 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4592 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4593
4594 for (i = 0; i < ioc->reply_depth; i++) {
4595 /* Write each address to the IOC! */
4596 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4597 alloc_dma += ioc->reply_sz;
4598 }
4599
4600 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4601 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4602 ioc->dma_mask))
4603 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4604 "restoring 64 bit addressing\n", ioc->name));
4605
4606 return 0;
4607
4608out_fail:
4609
4610 if (ioc->alloc != NULL) {
4611 sz = ioc->alloc_sz;
4612 pci_free_consistent(ioc->pcidev,
4613 sz,
4614 ioc->alloc, ioc->alloc_dma);
4615 ioc->reply_frames = NULL;
4616 ioc->req_frames = NULL;
4617 ioc->alloc_total -= sz;
4618 }
4619 if (ioc->sense_buf_pool != NULL) {
4620 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4621 pci_free_consistent(ioc->pcidev,
4622 sz,
4623 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4624 ioc->sense_buf_pool = NULL;
4625 }
4626
4627 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4628 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4629 DMA_BIT_MASK(64)))
4630 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4631 "restoring 64 bit addressing\n", ioc->name));
4632
4633 return -1;
4634}
4635
4636/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4637/**
4638 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4639 * from IOC via doorbell handshake method.
4640 * @ioc: Pointer to MPT_ADAPTER structure
4641 * @reqBytes: Size of the request in bytes
4642 * @req: Pointer to MPT request frame
4643 * @replyBytes: Expected size of the reply in bytes
4644 * @u16reply: Pointer to area where reply should be written
4645 * @maxwait: Max wait time for a reply (in seconds)
4646 * @sleepFlag: Specifies whether the process can sleep
4647 *
4648 * NOTES: It is the callers responsibility to byte-swap fields in the
4649 * request which are greater than 1 byte in size. It is also the
4650 * callers responsibility to byte-swap response fields which are
4651 * greater than 1 byte in size.
4652 *
4653 * Returns 0 for success, non-zero for failure.
4654 */
4655static int
4656mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4657 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4658{
4659 MPIDefaultReply_t *mptReply;
4660 int failcnt = 0;
4661 int t;
4662
4663 /*
4664 * Get ready to cache a handshake reply
4665 */
4666 ioc->hs_reply_idx = 0;
4667 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4668 mptReply->MsgLength = 0;
4669
4670 /*
4671 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4672 * then tell IOC that we want to handshake a request of N words.
4673 * (WRITE u32val to Doorbell reg).
4674 */
4675 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4676 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4677 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4678 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4679
4680 /*
4681 * Wait for IOC's doorbell handshake int
4682 */
4683 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4684 failcnt++;
4685
4686 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4687 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4688
4689 /* Read doorbell and check for active bit */
4690 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4691 return -1;
4692
4693 /*
4694 * Clear doorbell int (WRITE 0 to IntStatus reg),
4695 * then wait for IOC to ACKnowledge that it's ready for
4696 * our handshake request.
4697 */
4698 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4699 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4700 failcnt++;
4701
4702 if (!failcnt) {
4703 int ii;
4704 u8 *req_as_bytes = (u8 *) req;
4705
4706 /*
4707 * Stuff request words via doorbell handshake,
4708 * with ACK from IOC for each.
4709 */
4710 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4711 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4712 (req_as_bytes[(ii*4) + 1] << 8) |
4713 (req_as_bytes[(ii*4) + 2] << 16) |
4714 (req_as_bytes[(ii*4) + 3] << 24));
4715
4716 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4717 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4718 failcnt++;
4719 }
4720
4721 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4722 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4723
4724 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4725 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4726
4727 /*
4728 * Wait for completion of doorbell handshake reply from the IOC
4729 */
4730 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4731 failcnt++;
4732
4733 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4734 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4735
4736 /*
4737 * Copy out the cached reply...
4738 */
4739 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4740 u16reply[ii] = ioc->hs_reply[ii];
4741 } else {
4742 return -99;
4743 }
4744
4745 return -failcnt;
4746}
4747
4748/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4749/**
4750 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4751 * @ioc: Pointer to MPT_ADAPTER structure
4752 * @howlong: How long to wait (in seconds)
4753 * @sleepFlag: Specifies whether the process can sleep
4754 *
4755 * This routine waits (up to ~2 seconds max) for IOC doorbell
4756 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4757 * bit in its IntStatus register being clear.
4758 *
4759 * Returns a negative value on failure, else wait loop count.
4760 */
4761static int
4762WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4763{
4764 int cntdn;
4765 int count = 0;
4766 u32 intstat=0;
4767
4768 cntdn = 1000 * howlong;
4769
4770 if (sleepFlag == CAN_SLEEP) {
4771 while (--cntdn) {
4772 msleep (1);
4773 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4774 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4775 break;
4776 count++;
4777 }
4778 } else {
4779 while (--cntdn) {
4780 udelay (1000);
4781 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4782 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4783 break;
4784 count++;
4785 }
4786 }
4787
4788 if (cntdn) {
4789 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4790 ioc->name, count));
4791 return count;
4792 }
4793
4794 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4795 ioc->name, count, intstat);
4796 return -1;
4797}
4798
4799/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4800/**
4801 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4802 * @ioc: Pointer to MPT_ADAPTER structure
4803 * @howlong: How long to wait (in seconds)
4804 * @sleepFlag: Specifies whether the process can sleep
4805 *
4806 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4807 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4808 *
4809 * Returns a negative value on failure, else wait loop count.
4810 */
4811static int
4812WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4813{
4814 int cntdn;
4815 int count = 0;
4816 u32 intstat=0;
4817
4818 cntdn = 1000 * howlong;
4819 if (sleepFlag == CAN_SLEEP) {
4820 while (--cntdn) {
4821 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4822 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4823 break;
4824 msleep(1);
4825 count++;
4826 }
4827 } else {
4828 while (--cntdn) {
4829 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4830 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4831 break;
4832 udelay (1000);
4833 count++;
4834 }
4835 }
4836
4837 if (cntdn) {
4838 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4839 ioc->name, count, howlong));
4840 return count;
4841 }
4842
4843 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4844 ioc->name, count, intstat);
4845 return -1;
4846}
4847
4848/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4849/**
4850 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4851 * @ioc: Pointer to MPT_ADAPTER structure
4852 * @howlong: How long to wait (in seconds)
4853 * @sleepFlag: Specifies whether the process can sleep
4854 *
4855 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4856 * Reply is cached to IOC private area large enough to hold a maximum
4857 * of 128 bytes of reply data.
4858 *
4859 * Returns a negative value on failure, else size of reply in WORDS.
4860 */
4861static int
4862WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4863{
4864 int u16cnt = 0;
4865 int failcnt = 0;
4866 int t;
4867 u16 *hs_reply = ioc->hs_reply;
4868 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4869 u16 hword;
4870
4871 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4872
4873 /*
4874 * Get first two u16's so we can look at IOC's intended reply MsgLength
4875 */
4876 u16cnt=0;
4877 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4878 failcnt++;
4879 } else {
4880 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4881 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4882 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4883 failcnt++;
4884 else {
4885 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4886 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4887 }
4888 }
4889
4890 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4891 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4892 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4893
4894 /*
4895 * If no error (and IOC said MsgLength is > 0), piece together
4896 * reply 16 bits at a time.
4897 */
4898 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4899 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4900 failcnt++;
4901 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4902 /* don't overflow our IOC hs_reply[] buffer! */
4903 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4904 hs_reply[u16cnt] = hword;
4905 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4906 }
4907
4908 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4909 failcnt++;
4910 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4911
4912 if (failcnt) {
4913 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4914 ioc->name);
4915 return -failcnt;
4916 }
4917#if 0
4918 else if (u16cnt != (2 * mptReply->MsgLength)) {
4919 return -101;
4920 }
4921 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4922 return -102;
4923 }
4924#endif
4925
4926 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4927 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4928
4929 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4930 ioc->name, t, u16cnt/2));
4931 return u16cnt/2;
4932}
4933
4934/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4935/**
4936 * GetLanConfigPages - Fetch LANConfig pages.
4937 * @ioc: Pointer to MPT_ADAPTER structure
4938 *
4939 * Return: 0 for success
4940 * -ENOMEM if no memory available
4941 * -EPERM if not allowed due to ISR context
4942 * -EAGAIN if no msg frames currently available
4943 * -EFAULT for non-successful reply or no reply (timeout)
4944 */
4945static int
4946GetLanConfigPages(MPT_ADAPTER *ioc)
4947{
4948 ConfigPageHeader_t hdr;
4949 CONFIGPARMS cfg;
4950 LANPage0_t *ppage0_alloc;
4951 dma_addr_t page0_dma;
4952 LANPage1_t *ppage1_alloc;
4953 dma_addr_t page1_dma;
4954 int rc = 0;
4955 int data_sz;
4956 int copy_sz;
4957
4958 /* Get LAN Page 0 header */
4959 hdr.PageVersion = 0;
4960 hdr.PageLength = 0;
4961 hdr.PageNumber = 0;
4962 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4963 cfg.cfghdr.hdr = &hdr;
4964 cfg.physAddr = -1;
4965 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4966 cfg.dir = 0;
4967 cfg.pageAddr = 0;
4968 cfg.timeout = 0;
4969
4970 if ((rc = mpt_config(ioc, &cfg)) != 0)
4971 return rc;
4972
4973 if (hdr.PageLength > 0) {
4974 data_sz = hdr.PageLength * 4;
4975 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4976 rc = -ENOMEM;
4977 if (ppage0_alloc) {
4978 memset((u8 *)ppage0_alloc, 0, data_sz);
4979 cfg.physAddr = page0_dma;
4980 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4981
4982 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4983 /* save the data */
4984 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4985 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4986
4987 }
4988
4989 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4990
4991 /* FIXME!
4992 * Normalize endianness of structure data,
4993 * by byte-swapping all > 1 byte fields!
4994 */
4995
4996 }
4997
4998 if (rc)
4999 return rc;
5000 }
5001
5002 /* Get LAN Page 1 header */
5003 hdr.PageVersion = 0;
5004 hdr.PageLength = 0;
5005 hdr.PageNumber = 1;
5006 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5007 cfg.cfghdr.hdr = &hdr;
5008 cfg.physAddr = -1;
5009 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5010 cfg.dir = 0;
5011 cfg.pageAddr = 0;
5012
5013 if ((rc = mpt_config(ioc, &cfg)) != 0)
5014 return rc;
5015
5016 if (hdr.PageLength == 0)
5017 return 0;
5018
5019 data_sz = hdr.PageLength * 4;
5020 rc = -ENOMEM;
5021 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5022 if (ppage1_alloc) {
5023 memset((u8 *)ppage1_alloc, 0, data_sz);
5024 cfg.physAddr = page1_dma;
5025 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5026
5027 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5028 /* save the data */
5029 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5030 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5031 }
5032
5033 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5034
5035 /* FIXME!
5036 * Normalize endianness of structure data,
5037 * by byte-swapping all > 1 byte fields!
5038 */
5039
5040 }
5041
5042 return rc;
5043}
5044
5045/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5046/**
5047 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5048 * @ioc: Pointer to MPT_ADAPTER structure
5049 * @persist_opcode: see below
5050 *
5051 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5052 * devices not currently present.
5053 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5054 *
5055 * NOTE: Don't use not this function during interrupt time.
5056 *
5057 * Returns 0 for success, non-zero error
5058 */
5059
5060/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5061int
5062mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5063{
5064 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5065 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5066 MPT_FRAME_HDR *mf = NULL;
5067 MPIHeader_t *mpi_hdr;
5068 int ret = 0;
5069 unsigned long timeleft;
5070
5071 mutex_lock(&ioc->mptbase_cmds.mutex);
5072
5073 /* init the internal cmd struct */
5074 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5075 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5076
5077 /* insure garbage is not sent to fw */
5078 switch(persist_opcode) {
5079
5080 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5081 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5082 break;
5083
5084 default:
5085 ret = -1;
5086 goto out;
5087 }
5088
5089 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5090 __func__, persist_opcode);
5091
5092 /* Get a MF for this command.
5093 */
5094 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5095 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5096 ret = -1;
5097 goto out;
5098 }
5099
5100 mpi_hdr = (MPIHeader_t *) mf;
5101 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5102 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5103 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5104 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5105 sasIoUnitCntrReq->Operation = persist_opcode;
5106
5107 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5108 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5109 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5110 ret = -ETIME;
5111 printk(KERN_DEBUG "%s: failed\n", __func__);
5112 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5113 goto out;
5114 if (!timeleft) {
5115 printk(MYIOC_s_WARN_FMT
5116 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5117 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5118 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5119 mpt_free_msg_frame(ioc, mf);
5120 }
5121 goto out;
5122 }
5123
5124 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5125 ret = -1;
5126 goto out;
5127 }
5128
5129 sasIoUnitCntrReply =
5130 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5131 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5132 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5133 __func__, sasIoUnitCntrReply->IOCStatus,
5134 sasIoUnitCntrReply->IOCLogInfo);
5135 printk(KERN_DEBUG "%s: failed\n", __func__);
5136 ret = -1;
5137 } else
5138 printk(KERN_DEBUG "%s: success\n", __func__);
5139 out:
5140
5141 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5142 mutex_unlock(&ioc->mptbase_cmds.mutex);
5143 return ret;
5144}
5145
5146/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5147
5148static void
5149mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5150 MpiEventDataRaid_t * pRaidEventData)
5151{
5152 int volume;
5153 int reason;
5154 int disk;
5155 int status;
5156 int flags;
5157 int state;
5158
5159 volume = pRaidEventData->VolumeID;
5160 reason = pRaidEventData->ReasonCode;
5161 disk = pRaidEventData->PhysDiskNum;
5162 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5163 flags = (status >> 0) & 0xff;
5164 state = (status >> 8) & 0xff;
5165
5166 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5167 return;
5168 }
5169
5170 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5171 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5172 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5173 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5174 ioc->name, disk, volume);
5175 } else {
5176 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5177 ioc->name, volume);
5178 }
5179
5180 switch(reason) {
5181 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5182 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5183 ioc->name);
5184 break;
5185
5186 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5187
5188 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5189 ioc->name);
5190 break;
5191
5192 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5193 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5194 ioc->name);
5195 break;
5196
5197 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5198 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5199 ioc->name,
5200 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5201 ? "optimal"
5202 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5203 ? "degraded"
5204 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5205 ? "failed"
5206 : "state unknown",
5207 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5208 ? ", enabled" : "",
5209 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5210 ? ", quiesced" : "",
5211 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5212 ? ", resync in progress" : "" );
5213 break;
5214
5215 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5216 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5217 ioc->name, disk);
5218 break;
5219
5220 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5221 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5222 ioc->name);
5223 break;
5224
5225 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5226 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5227 ioc->name);
5228 break;
5229
5230 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5231 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5232 ioc->name);
5233 break;
5234
5235 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5236 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5237 ioc->name,
5238 state == MPI_PHYSDISK0_STATUS_ONLINE
5239 ? "online"
5240 : state == MPI_PHYSDISK0_STATUS_MISSING
5241 ? "missing"
5242 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5243 ? "not compatible"
5244 : state == MPI_PHYSDISK0_STATUS_FAILED
5245 ? "failed"
5246 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5247 ? "initializing"
5248 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5249 ? "offline requested"
5250 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5251 ? "failed requested"
5252 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5253 ? "offline"
5254 : "state unknown",
5255 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5256 ? ", out of sync" : "",
5257 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5258 ? ", quiesced" : "" );
5259 break;
5260
5261 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5262 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5263 ioc->name, disk);
5264 break;
5265
5266 case MPI_EVENT_RAID_RC_SMART_DATA:
5267 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5268 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5269 break;
5270
5271 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5272 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5273 ioc->name, disk);
5274 break;
5275 }
5276}
5277
5278/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5279/**
5280 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5281 * @ioc: Pointer to MPT_ADAPTER structure
5282 *
5283 * Returns: 0 for success
5284 * -ENOMEM if no memory available
5285 * -EPERM if not allowed due to ISR context
5286 * -EAGAIN if no msg frames currently available
5287 * -EFAULT for non-successful reply or no reply (timeout)
5288 */
5289static int
5290GetIoUnitPage2(MPT_ADAPTER *ioc)
5291{
5292 ConfigPageHeader_t hdr;
5293 CONFIGPARMS cfg;
5294 IOUnitPage2_t *ppage_alloc;
5295 dma_addr_t page_dma;
5296 int data_sz;
5297 int rc;
5298
5299 /* Get the page header */
5300 hdr.PageVersion = 0;
5301 hdr.PageLength = 0;
5302 hdr.PageNumber = 2;
5303 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5304 cfg.cfghdr.hdr = &hdr;
5305 cfg.physAddr = -1;
5306 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5307 cfg.dir = 0;
5308 cfg.pageAddr = 0;
5309 cfg.timeout = 0;
5310
5311 if ((rc = mpt_config(ioc, &cfg)) != 0)
5312 return rc;
5313
5314 if (hdr.PageLength == 0)
5315 return 0;
5316
5317 /* Read the config page */
5318 data_sz = hdr.PageLength * 4;
5319 rc = -ENOMEM;
5320 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5321 if (ppage_alloc) {
5322 memset((u8 *)ppage_alloc, 0, data_sz);
5323 cfg.physAddr = page_dma;
5324 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5325
5326 /* If Good, save data */
5327 if ((rc = mpt_config(ioc, &cfg)) == 0)
5328 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5329
5330 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5331 }
5332
5333 return rc;
5334}
5335
5336/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5337/**
5338 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5339 * @ioc: Pointer to a Adapter Strucutre
5340 * @portnum: IOC port number
5341 *
5342 * Return: -EFAULT if read of config page header fails
5343 * or if no nvram
5344 * If read of SCSI Port Page 0 fails,
5345 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5346 * Adapter settings: async, narrow
5347 * Return 1
5348 * If read of SCSI Port Page 2 fails,
5349 * Adapter settings valid
5350 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5351 * Return 1
5352 * Else
5353 * Both valid
5354 * Return 0
5355 * CHECK - what type of locking mechanisms should be used????
5356 */
5357static int
5358mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5359{
5360 u8 *pbuf;
5361 dma_addr_t buf_dma;
5362 CONFIGPARMS cfg;
5363 ConfigPageHeader_t header;
5364 int ii;
5365 int data, rc = 0;
5366
5367 /* Allocate memory
5368 */
5369 if (!ioc->spi_data.nvram) {
5370 int sz;
5371 u8 *mem;
5372 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5373 mem = kmalloc(sz, GFP_ATOMIC);
5374 if (mem == NULL)
5375 return -EFAULT;
5376
5377 ioc->spi_data.nvram = (int *) mem;
5378
5379 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5380 ioc->name, ioc->spi_data.nvram, sz));
5381 }
5382
5383 /* Invalidate NVRAM information
5384 */
5385 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5386 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5387 }
5388
5389 /* Read SPP0 header, allocate memory, then read page.
5390 */
5391 header.PageVersion = 0;
5392 header.PageLength = 0;
5393 header.PageNumber = 0;
5394 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5395 cfg.cfghdr.hdr = &header;
5396 cfg.physAddr = -1;
5397 cfg.pageAddr = portnum;
5398 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5399 cfg.dir = 0;
5400 cfg.timeout = 0; /* use default */
5401 if (mpt_config(ioc, &cfg) != 0)
5402 return -EFAULT;
5403
5404 if (header.PageLength > 0) {
5405 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5406 if (pbuf) {
5407 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5408 cfg.physAddr = buf_dma;
5409 if (mpt_config(ioc, &cfg) != 0) {
5410 ioc->spi_data.maxBusWidth = MPT_NARROW;
5411 ioc->spi_data.maxSyncOffset = 0;
5412 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5413 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5414 rc = 1;
5415 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5416 "Unable to read PortPage0 minSyncFactor=%x\n",
5417 ioc->name, ioc->spi_data.minSyncFactor));
5418 } else {
5419 /* Save the Port Page 0 data
5420 */
5421 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5422 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5423 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5424
5425 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5426 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5427 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5428 "noQas due to Capabilities=%x\n",
5429 ioc->name, pPP0->Capabilities));
5430 }
5431 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5432 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5433 if (data) {
5434 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5436 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5437 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5438 "PortPage0 minSyncFactor=%x\n",
5439 ioc->name, ioc->spi_data.minSyncFactor));
5440 } else {
5441 ioc->spi_data.maxSyncOffset = 0;
5442 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5443 }
5444
5445 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5446
5447 /* Update the minSyncFactor based on bus type.
5448 */
5449 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5450 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5451
5452 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5453 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5454 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5455 "HVD or SE detected, minSyncFactor=%x\n",
5456 ioc->name, ioc->spi_data.minSyncFactor));
5457 }
5458 }
5459 }
5460 if (pbuf) {
5461 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5462 }
5463 }
5464 }
5465
5466 /* SCSI Port Page 2 - Read the header then the page.
5467 */
5468 header.PageVersion = 0;
5469 header.PageLength = 0;
5470 header.PageNumber = 2;
5471 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5472 cfg.cfghdr.hdr = &header;
5473 cfg.physAddr = -1;
5474 cfg.pageAddr = portnum;
5475 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5476 cfg.dir = 0;
5477 if (mpt_config(ioc, &cfg) != 0)
5478 return -EFAULT;
5479
5480 if (header.PageLength > 0) {
5481 /* Allocate memory and read SCSI Port Page 2
5482 */
5483 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5484 if (pbuf) {
5485 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5486 cfg.physAddr = buf_dma;
5487 if (mpt_config(ioc, &cfg) != 0) {
5488 /* Nvram data is left with INVALID mark
5489 */
5490 rc = 1;
5491 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5492
5493 /* This is an ATTO adapter, read Page2 accordingly
5494 */
5495 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5496 ATTODeviceInfo_t *pdevice = NULL;
5497 u16 ATTOFlags;
5498
5499 /* Save the Port Page 2 data
5500 * (reformat into a 32bit quantity)
5501 */
5502 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5503 pdevice = &pPP2->DeviceSettings[ii];
5504 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5505 data = 0;
5506
5507 /* Translate ATTO device flags to LSI format
5508 */
5509 if (ATTOFlags & ATTOFLAG_DISC)
5510 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5511 if (ATTOFlags & ATTOFLAG_ID_ENB)
5512 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5513 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5515 if (ATTOFlags & ATTOFLAG_TAGGED)
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5517 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5519
5520 data = (data << 16) | (pdevice->Period << 8) | 10;
5521 ioc->spi_data.nvram[ii] = data;
5522 }
5523 } else {
5524 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5525 MpiDeviceInfo_t *pdevice = NULL;
5526
5527 /*
5528 * Save "Set to Avoid SCSI Bus Resets" flag
5529 */
5530 ioc->spi_data.bus_reset =
5531 (le32_to_cpu(pPP2->PortFlags) &
5532 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5533 0 : 1 ;
5534
5535 /* Save the Port Page 2 data
5536 * (reformat into a 32bit quantity)
5537 */
5538 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5539 ioc->spi_data.PortFlags = data;
5540 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5541 pdevice = &pPP2->DeviceSettings[ii];
5542 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5543 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5544 ioc->spi_data.nvram[ii] = data;
5545 }
5546 }
5547
5548 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5549 }
5550 }
5551
5552 /* Update Adapter limits with those from NVRAM
5553 * Comment: Don't need to do this. Target performance
5554 * parameters will never exceed the adapters limits.
5555 */
5556
5557 return rc;
5558}
5559
5560/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5561/**
5562 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5563 * @ioc: Pointer to a Adapter Strucutre
5564 * @portnum: IOC port number
5565 *
5566 * Return: -EFAULT if read of config page header fails
5567 * or 0 if success.
5568 */
5569static int
5570mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5571{
5572 CONFIGPARMS cfg;
5573 ConfigPageHeader_t header;
5574
5575 /* Read the SCSI Device Page 1 header
5576 */
5577 header.PageVersion = 0;
5578 header.PageLength = 0;
5579 header.PageNumber = 1;
5580 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5581 cfg.cfghdr.hdr = &header;
5582 cfg.physAddr = -1;
5583 cfg.pageAddr = portnum;
5584 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5585 cfg.dir = 0;
5586 cfg.timeout = 0;
5587 if (mpt_config(ioc, &cfg) != 0)
5588 return -EFAULT;
5589
5590 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5591 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5592
5593 header.PageVersion = 0;
5594 header.PageLength = 0;
5595 header.PageNumber = 0;
5596 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5597 if (mpt_config(ioc, &cfg) != 0)
5598 return -EFAULT;
5599
5600 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5601 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5602
5603 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5604 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5605
5606 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5607 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5608 return 0;
5609}
5610
5611/**
5612 * mpt_inactive_raid_list_free - This clears this link list.
5613 * @ioc : pointer to per adapter structure
5614 **/
5615static void
5616mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5617{
5618 struct inactive_raid_component_info *component_info, *pNext;
5619
5620 if (list_empty(&ioc->raid_data.inactive_list))
5621 return;
5622
5623 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5624 list_for_each_entry_safe(component_info, pNext,
5625 &ioc->raid_data.inactive_list, list) {
5626 list_del(&component_info->list);
5627 kfree(component_info);
5628 }
5629 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5630}
5631
5632/**
5633 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5634 *
5635 * @ioc : pointer to per adapter structure
5636 * @channel : volume channel
5637 * @id : volume target id
5638 **/
5639static void
5640mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5641{
5642 CONFIGPARMS cfg;
5643 ConfigPageHeader_t hdr;
5644 dma_addr_t dma_handle;
5645 pRaidVolumePage0_t buffer = NULL;
5646 int i;
5647 RaidPhysDiskPage0_t phys_disk;
5648 struct inactive_raid_component_info *component_info;
5649 int handle_inactive_volumes;
5650
5651 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5652 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5653 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5654 cfg.pageAddr = (channel << 8) + id;
5655 cfg.cfghdr.hdr = &hdr;
5656 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5657
5658 if (mpt_config(ioc, &cfg) != 0)
5659 goto out;
5660
5661 if (!hdr.PageLength)
5662 goto out;
5663
5664 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5665 &dma_handle);
5666
5667 if (!buffer)
5668 goto out;
5669
5670 cfg.physAddr = dma_handle;
5671 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5672
5673 if (mpt_config(ioc, &cfg) != 0)
5674 goto out;
5675
5676 if (!buffer->NumPhysDisks)
5677 goto out;
5678
5679 handle_inactive_volumes =
5680 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5681 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5682 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5683 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5684
5685 if (!handle_inactive_volumes)
5686 goto out;
5687
5688 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5689 for (i = 0; i < buffer->NumPhysDisks; i++) {
5690 if(mpt_raid_phys_disk_pg0(ioc,
5691 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5692 continue;
5693
5694 if ((component_info = kmalloc(sizeof (*component_info),
5695 GFP_KERNEL)) == NULL)
5696 continue;
5697
5698 component_info->volumeID = id;
5699 component_info->volumeBus = channel;
5700 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5701 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5702 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5703 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5704
5705 list_add_tail(&component_info->list,
5706 &ioc->raid_data.inactive_list);
5707 }
5708 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5709
5710 out:
5711 if (buffer)
5712 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5713 dma_handle);
5714}
5715
5716/**
5717 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5718 * @ioc: Pointer to a Adapter Structure
5719 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5720 * @phys_disk: requested payload data returned
5721 *
5722 * Return:
5723 * 0 on success
5724 * -EFAULT if read of config page header fails or data pointer not NULL
5725 * -ENOMEM if pci_alloc failed
5726 **/
5727int
5728mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5729 RaidPhysDiskPage0_t *phys_disk)
5730{
5731 CONFIGPARMS cfg;
5732 ConfigPageHeader_t hdr;
5733 dma_addr_t dma_handle;
5734 pRaidPhysDiskPage0_t buffer = NULL;
5735 int rc;
5736
5737 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5738 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5739 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5740
5741 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5742 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5743 cfg.cfghdr.hdr = &hdr;
5744 cfg.physAddr = -1;
5745 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5746
5747 if (mpt_config(ioc, &cfg) != 0) {
5748 rc = -EFAULT;
5749 goto out;
5750 }
5751
5752 if (!hdr.PageLength) {
5753 rc = -EFAULT;
5754 goto out;
5755 }
5756
5757 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5758 &dma_handle);
5759
5760 if (!buffer) {
5761 rc = -ENOMEM;
5762 goto out;
5763 }
5764
5765 cfg.physAddr = dma_handle;
5766 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5767 cfg.pageAddr = phys_disk_num;
5768
5769 if (mpt_config(ioc, &cfg) != 0) {
5770 rc = -EFAULT;
5771 goto out;
5772 }
5773
5774 rc = 0;
5775 memcpy(phys_disk, buffer, sizeof(*buffer));
5776 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5777
5778 out:
5779
5780 if (buffer)
5781 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5782 dma_handle);
5783
5784 return rc;
5785}
5786
5787/**
5788 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5789 * @ioc: Pointer to a Adapter Structure
5790 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5791 *
5792 * Return:
5793 * returns number paths
5794 **/
5795int
5796mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5797{
5798 CONFIGPARMS cfg;
5799 ConfigPageHeader_t hdr;
5800 dma_addr_t dma_handle;
5801 pRaidPhysDiskPage1_t buffer = NULL;
5802 int rc;
5803
5804 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5805 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5806
5807 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5808 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5809 hdr.PageNumber = 1;
5810 cfg.cfghdr.hdr = &hdr;
5811 cfg.physAddr = -1;
5812 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5813
5814 if (mpt_config(ioc, &cfg) != 0) {
5815 rc = 0;
5816 goto out;
5817 }
5818
5819 if (!hdr.PageLength) {
5820 rc = 0;
5821 goto out;
5822 }
5823
5824 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5825 &dma_handle);
5826
5827 if (!buffer) {
5828 rc = 0;
5829 goto out;
5830 }
5831
5832 cfg.physAddr = dma_handle;
5833 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5834 cfg.pageAddr = phys_disk_num;
5835
5836 if (mpt_config(ioc, &cfg) != 0) {
5837 rc = 0;
5838 goto out;
5839 }
5840
5841 rc = buffer->NumPhysDiskPaths;
5842 out:
5843
5844 if (buffer)
5845 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5846 dma_handle);
5847
5848 return rc;
5849}
5850EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5851
5852/**
5853 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5854 * @ioc: Pointer to a Adapter Structure
5855 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5856 * @phys_disk: requested payload data returned
5857 *
5858 * Return:
5859 * 0 on success
5860 * -EFAULT if read of config page header fails or data pointer not NULL
5861 * -ENOMEM if pci_alloc failed
5862 **/
5863int
5864mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5865 RaidPhysDiskPage1_t *phys_disk)
5866{
5867 CONFIGPARMS cfg;
5868 ConfigPageHeader_t hdr;
5869 dma_addr_t dma_handle;
5870 pRaidPhysDiskPage1_t buffer = NULL;
5871 int rc;
5872 int i;
5873 __le64 sas_address;
5874
5875 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5876 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5877 rc = 0;
5878
5879 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5880 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5881 hdr.PageNumber = 1;
5882 cfg.cfghdr.hdr = &hdr;
5883 cfg.physAddr = -1;
5884 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5885
5886 if (mpt_config(ioc, &cfg) != 0) {
5887 rc = -EFAULT;
5888 goto out;
5889 }
5890
5891 if (!hdr.PageLength) {
5892 rc = -EFAULT;
5893 goto out;
5894 }
5895
5896 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5897 &dma_handle);
5898
5899 if (!buffer) {
5900 rc = -ENOMEM;
5901 goto out;
5902 }
5903
5904 cfg.physAddr = dma_handle;
5905 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5906 cfg.pageAddr = phys_disk_num;
5907
5908 if (mpt_config(ioc, &cfg) != 0) {
5909 rc = -EFAULT;
5910 goto out;
5911 }
5912
5913 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5914 phys_disk->PhysDiskNum = phys_disk_num;
5915 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5916 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5917 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5918 phys_disk->Path[i].OwnerIdentifier =
5919 buffer->Path[i].OwnerIdentifier;
5920 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5921 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5922 sas_address = le64_to_cpu(sas_address);
5923 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5924 memcpy(&sas_address,
5925 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5926 sas_address = le64_to_cpu(sas_address);
5927 memcpy(&phys_disk->Path[i].OwnerWWID,
5928 &sas_address, sizeof(__le64));
5929 }
5930
5931 out:
5932
5933 if (buffer)
5934 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5935 dma_handle);
5936
5937 return rc;
5938}
5939EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5940
5941
5942/**
5943 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5944 * @ioc: Pointer to a Adapter Strucutre
5945 *
5946 * Return:
5947 * 0 on success
5948 * -EFAULT if read of config page header fails or data pointer not NULL
5949 * -ENOMEM if pci_alloc failed
5950 **/
5951int
5952mpt_findImVolumes(MPT_ADAPTER *ioc)
5953{
5954 IOCPage2_t *pIoc2;
5955 u8 *mem;
5956 dma_addr_t ioc2_dma;
5957 CONFIGPARMS cfg;
5958 ConfigPageHeader_t header;
5959 int rc = 0;
5960 int iocpage2sz;
5961 int i;
5962
5963 if (!ioc->ir_firmware)
5964 return 0;
5965
5966 /* Free the old page
5967 */
5968 kfree(ioc->raid_data.pIocPg2);
5969 ioc->raid_data.pIocPg2 = NULL;
5970 mpt_inactive_raid_list_free(ioc);
5971
5972 /* Read IOCP2 header then the page.
5973 */
5974 header.PageVersion = 0;
5975 header.PageLength = 0;
5976 header.PageNumber = 2;
5977 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5978 cfg.cfghdr.hdr = &header;
5979 cfg.physAddr = -1;
5980 cfg.pageAddr = 0;
5981 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5982 cfg.dir = 0;
5983 cfg.timeout = 0;
5984 if (mpt_config(ioc, &cfg) != 0)
5985 return -EFAULT;
5986
5987 if (header.PageLength == 0)
5988 return -EFAULT;
5989
5990 iocpage2sz = header.PageLength * 4;
5991 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5992 if (!pIoc2)
5993 return -ENOMEM;
5994
5995 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5996 cfg.physAddr = ioc2_dma;
5997 if (mpt_config(ioc, &cfg) != 0)
5998 goto out;
5999
6000 mem = kmalloc(iocpage2sz, GFP_KERNEL);
6001 if (!mem) {
6002 rc = -ENOMEM;
6003 goto out;
6004 }
6005
6006 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6007 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6008
6009 mpt_read_ioc_pg_3(ioc);
6010
6011 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6012 mpt_inactive_raid_volumes(ioc,
6013 pIoc2->RaidVolume[i].VolumeBus,
6014 pIoc2->RaidVolume[i].VolumeID);
6015
6016 out:
6017 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6018
6019 return rc;
6020}
6021
6022static int
6023mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6024{
6025 IOCPage3_t *pIoc3;
6026 u8 *mem;
6027 CONFIGPARMS cfg;
6028 ConfigPageHeader_t header;
6029 dma_addr_t ioc3_dma;
6030 int iocpage3sz = 0;
6031
6032 /* Free the old page
6033 */
6034 kfree(ioc->raid_data.pIocPg3);
6035 ioc->raid_data.pIocPg3 = NULL;
6036
6037 /* There is at least one physical disk.
6038 * Read and save IOC Page 3
6039 */
6040 header.PageVersion = 0;
6041 header.PageLength = 0;
6042 header.PageNumber = 3;
6043 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6044 cfg.cfghdr.hdr = &header;
6045 cfg.physAddr = -1;
6046 cfg.pageAddr = 0;
6047 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6048 cfg.dir = 0;
6049 cfg.timeout = 0;
6050 if (mpt_config(ioc, &cfg) != 0)
6051 return 0;
6052
6053 if (header.PageLength == 0)
6054 return 0;
6055
6056 /* Read Header good, alloc memory
6057 */
6058 iocpage3sz = header.PageLength * 4;
6059 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6060 if (!pIoc3)
6061 return 0;
6062
6063 /* Read the Page and save the data
6064 * into malloc'd memory.
6065 */
6066 cfg.physAddr = ioc3_dma;
6067 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6068 if (mpt_config(ioc, &cfg) == 0) {
6069 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6070 if (mem) {
6071 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6072 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6073 }
6074 }
6075
6076 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6077
6078 return 0;
6079}
6080
6081static void
6082mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6083{
6084 IOCPage4_t *pIoc4;
6085 CONFIGPARMS cfg;
6086 ConfigPageHeader_t header;
6087 dma_addr_t ioc4_dma;
6088 int iocpage4sz;
6089
6090 /* Read and save IOC Page 4
6091 */
6092 header.PageVersion = 0;
6093 header.PageLength = 0;
6094 header.PageNumber = 4;
6095 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6096 cfg.cfghdr.hdr = &header;
6097 cfg.physAddr = -1;
6098 cfg.pageAddr = 0;
6099 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6100 cfg.dir = 0;
6101 cfg.timeout = 0;
6102 if (mpt_config(ioc, &cfg) != 0)
6103 return;
6104
6105 if (header.PageLength == 0)
6106 return;
6107
6108 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6109 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6110 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6111 if (!pIoc4)
6112 return;
6113 ioc->alloc_total += iocpage4sz;
6114 } else {
6115 ioc4_dma = ioc->spi_data.IocPg4_dma;
6116 iocpage4sz = ioc->spi_data.IocPg4Sz;
6117 }
6118
6119 /* Read the Page into dma memory.
6120 */
6121 cfg.physAddr = ioc4_dma;
6122 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6123 if (mpt_config(ioc, &cfg) == 0) {
6124 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6125 ioc->spi_data.IocPg4_dma = ioc4_dma;
6126 ioc->spi_data.IocPg4Sz = iocpage4sz;
6127 } else {
6128 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6129 ioc->spi_data.pIocPg4 = NULL;
6130 ioc->alloc_total -= iocpage4sz;
6131 }
6132}
6133
6134static void
6135mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6136{
6137 IOCPage1_t *pIoc1;
6138 CONFIGPARMS cfg;
6139 ConfigPageHeader_t header;
6140 dma_addr_t ioc1_dma;
6141 int iocpage1sz = 0;
6142 u32 tmp;
6143
6144 /* Check the Coalescing Timeout in IOC Page 1
6145 */
6146 header.PageVersion = 0;
6147 header.PageLength = 0;
6148 header.PageNumber = 1;
6149 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6150 cfg.cfghdr.hdr = &header;
6151 cfg.physAddr = -1;
6152 cfg.pageAddr = 0;
6153 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6154 cfg.dir = 0;
6155 cfg.timeout = 0;
6156 if (mpt_config(ioc, &cfg) != 0)
6157 return;
6158
6159 if (header.PageLength == 0)
6160 return;
6161
6162 /* Read Header good, alloc memory
6163 */
6164 iocpage1sz = header.PageLength * 4;
6165 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6166 if (!pIoc1)
6167 return;
6168
6169 /* Read the Page and check coalescing timeout
6170 */
6171 cfg.physAddr = ioc1_dma;
6172 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6173 if (mpt_config(ioc, &cfg) == 0) {
6174
6175 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6176 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6177 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6178
6179 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6180 ioc->name, tmp));
6181
6182 if (tmp > MPT_COALESCING_TIMEOUT) {
6183 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6184
6185 /* Write NVRAM and current
6186 */
6187 cfg.dir = 1;
6188 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6189 if (mpt_config(ioc, &cfg) == 0) {
6190 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6191 ioc->name, MPT_COALESCING_TIMEOUT));
6192
6193 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6194 if (mpt_config(ioc, &cfg) == 0) {
6195 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6196 "Reset NVRAM Coalescing Timeout to = %d\n",
6197 ioc->name, MPT_COALESCING_TIMEOUT));
6198 } else {
6199 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6200 "Reset NVRAM Coalescing Timeout Failed\n",
6201 ioc->name));
6202 }
6203
6204 } else {
6205 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6206 "Reset of Current Coalescing Timeout Failed!\n",
6207 ioc->name));
6208 }
6209 }
6210
6211 } else {
6212 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6213 }
6214 }
6215
6216 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6217
6218 return;
6219}
6220
6221static void
6222mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6223{
6224 CONFIGPARMS cfg;
6225 ConfigPageHeader_t hdr;
6226 dma_addr_t buf_dma;
6227 ManufacturingPage0_t *pbuf = NULL;
6228
6229 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6230 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6231
6232 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6233 cfg.cfghdr.hdr = &hdr;
6234 cfg.physAddr = -1;
6235 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6236 cfg.timeout = 10;
6237
6238 if (mpt_config(ioc, &cfg) != 0)
6239 goto out;
6240
6241 if (!cfg.cfghdr.hdr->PageLength)
6242 goto out;
6243
6244 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6245 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6246 if (!pbuf)
6247 goto out;
6248
6249 cfg.physAddr = buf_dma;
6250
6251 if (mpt_config(ioc, &cfg) != 0)
6252 goto out;
6253
6254 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6255 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6256 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6257
6258out:
6259
6260 if (pbuf)
6261 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6262}
6263
6264/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6265/**
6266 * SendEventNotification - Send EventNotification (on or off) request to adapter
6267 * @ioc: Pointer to MPT_ADAPTER structure
6268 * @EvSwitch: Event switch flags
6269 * @sleepFlag: Specifies whether the process can sleep
6270 */
6271static int
6272SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6273{
6274 EventNotification_t evn;
6275 MPIDefaultReply_t reply_buf;
6276
6277 memset(&evn, 0, sizeof(EventNotification_t));
6278 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6279
6280 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6281 evn.Switch = EvSwitch;
6282 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6283
6284 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6285 "Sending EventNotification (%d) request %p\n",
6286 ioc->name, EvSwitch, &evn));
6287
6288 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6289 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6290 sleepFlag);
6291}
6292
6293/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6294/**
6295 * SendEventAck - Send EventAck request to MPT adapter.
6296 * @ioc: Pointer to MPT_ADAPTER structure
6297 * @evnp: Pointer to original EventNotification request
6298 */
6299static int
6300SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6301{
6302 EventAck_t *pAck;
6303
6304 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6305 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6306 ioc->name, __func__));
6307 return -1;
6308 }
6309
6310 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6311
6312 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6313 pAck->ChainOffset = 0;
6314 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6315 pAck->MsgFlags = 0;
6316 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6317 pAck->Event = evnp->Event;
6318 pAck->EventContext = evnp->EventContext;
6319
6320 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6321
6322 return 0;
6323}
6324
6325/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6326/**
6327 * mpt_config - Generic function to issue config message
6328 * @ioc: Pointer to an adapter structure
6329 * @pCfg: Pointer to a configuration structure. Struct contains
6330 * action, page address, direction, physical address
6331 * and pointer to a configuration page header
6332 * Page header is updated.
6333 *
6334 * Returns 0 for success
6335 * -EPERM if not allowed due to ISR context
6336 * -EAGAIN if no msg frames currently available
6337 * -EFAULT for non-successful reply or no reply (timeout)
6338 */
6339int
6340mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6341{
6342 Config_t *pReq;
6343 ConfigReply_t *pReply;
6344 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6345 MPT_FRAME_HDR *mf;
6346 int ii;
6347 int flagsLength;
6348 long timeout;
6349 int ret;
6350 u8 page_type = 0, extend_page;
6351 unsigned long timeleft;
6352 unsigned long flags;
6353 int in_isr;
6354 u8 issue_hard_reset = 0;
6355 u8 retry_count = 0;
6356
6357 /* Prevent calling wait_event() (below), if caller happens
6358 * to be in ISR context, because that is fatal!
6359 */
6360 in_isr = in_interrupt();
6361 if (in_isr) {
6362 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6363 ioc->name));
6364 return -EPERM;
6365 }
6366
6367 /* don't send a config page during diag reset */
6368 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6369 if (ioc->ioc_reset_in_progress) {
6370 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6371 "%s: busy with host reset\n", ioc->name, __func__));
6372 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6373 return -EBUSY;
6374 }
6375 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6376
6377 /* don't send if no chance of success */
6378 if (!ioc->active ||
6379 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6380 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6381 "%s: ioc not operational, %d, %xh\n",
6382 ioc->name, __func__, ioc->active,
6383 mpt_GetIocState(ioc, 0)));
6384 return -EFAULT;
6385 }
6386
6387 retry_config:
6388 mutex_lock(&ioc->mptbase_cmds.mutex);
6389 /* init the internal cmd struct */
6390 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6391 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6392
6393 /* Get and Populate a free Frame
6394 */
6395 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6396 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6397 "mpt_config: no msg frames!\n", ioc->name));
6398 ret = -EAGAIN;
6399 goto out;
6400 }
6401
6402 pReq = (Config_t *)mf;
6403 pReq->Action = pCfg->action;
6404 pReq->Reserved = 0;
6405 pReq->ChainOffset = 0;
6406 pReq->Function = MPI_FUNCTION_CONFIG;
6407
6408 /* Assume page type is not extended and clear "reserved" fields. */
6409 pReq->ExtPageLength = 0;
6410 pReq->ExtPageType = 0;
6411 pReq->MsgFlags = 0;
6412
6413 for (ii=0; ii < 8; ii++)
6414 pReq->Reserved2[ii] = 0;
6415
6416 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6417 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6418 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6419 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6420
6421 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6422 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6423 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6424 pReq->ExtPageType = pExtHdr->ExtPageType;
6425 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6426
6427 /* Page Length must be treated as a reserved field for the
6428 * extended header.
6429 */
6430 pReq->Header.PageLength = 0;
6431 }
6432
6433 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6434
6435 /* Add a SGE to the config request.
6436 */
6437 if (pCfg->dir)
6438 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6439 else
6440 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6441
6442 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6443 MPI_CONFIG_PAGETYPE_EXTENDED) {
6444 flagsLength |= pExtHdr->ExtPageLength * 4;
6445 page_type = pReq->ExtPageType;
6446 extend_page = 1;
6447 } else {
6448 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6449 page_type = pReq->Header.PageType;
6450 extend_page = 0;
6451 }
6452
6453 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6454 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6455 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6456
6457 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6458 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6459 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6460 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6461 timeout);
6462 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6463 ret = -ETIME;
6464 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6465 "Failed Sending Config request type 0x%x, page 0x%x,"
6466 " action %d, status %xh, time left %ld\n\n",
6467 ioc->name, page_type, pReq->Header.PageNumber,
6468 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6469 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6470 goto out;
6471 if (!timeleft) {
6472 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6473 if (ioc->ioc_reset_in_progress) {
6474 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6475 flags);
6476 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6477 " progress mpt_config timed out.!!\n",
6478 __func__, ioc->name);
6479 mutex_unlock(&ioc->mptbase_cmds.mutex);
6480 return -EFAULT;
6481 }
6482 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6483 issue_hard_reset = 1;
6484 }
6485 goto out;
6486 }
6487
6488 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6489 ret = -1;
6490 goto out;
6491 }
6492 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6493 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6494 if (ret == MPI_IOCSTATUS_SUCCESS) {
6495 if (extend_page) {
6496 pCfg->cfghdr.ehdr->ExtPageLength =
6497 le16_to_cpu(pReply->ExtPageLength);
6498 pCfg->cfghdr.ehdr->ExtPageType =
6499 pReply->ExtPageType;
6500 }
6501 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6502 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6503 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6504 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6505
6506 }
6507
6508 if (retry_count)
6509 printk(MYIOC_s_INFO_FMT "Retry completed "
6510 "ret=0x%x timeleft=%ld\n",
6511 ioc->name, ret, timeleft);
6512
6513 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6514 ret, le32_to_cpu(pReply->IOCLogInfo)));
6515
6516out:
6517
6518 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6519 mutex_unlock(&ioc->mptbase_cmds.mutex);
6520 if (issue_hard_reset) {
6521 issue_hard_reset = 0;
6522 printk(MYIOC_s_WARN_FMT
6523 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6524 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6525 if (retry_count == 0) {
6526 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6527 retry_count++;
6528 } else
6529 mpt_HardResetHandler(ioc, CAN_SLEEP);
6530
6531 mpt_free_msg_frame(ioc, mf);
6532 /* attempt one retry for a timed out command */
6533 if (retry_count < 2) {
6534 printk(MYIOC_s_INFO_FMT
6535 "Attempting Retry Config request"
6536 " type 0x%x, page 0x%x,"
6537 " action %d\n", ioc->name, page_type,
6538 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6539 retry_count++;
6540 goto retry_config;
6541 }
6542 }
6543 return ret;
6544
6545}
6546
6547/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6548/**
6549 * mpt_ioc_reset - Base cleanup for hard reset
6550 * @ioc: Pointer to the adapter structure
6551 * @reset_phase: Indicates pre- or post-reset functionality
6552 *
6553 * Remark: Frees resources with internally generated commands.
6554 */
6555static int
6556mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6557{
6558 switch (reset_phase) {
6559 case MPT_IOC_SETUP_RESET:
6560 ioc->taskmgmt_quiesce_io = 1;
6561 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6562 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6563 break;
6564 case MPT_IOC_PRE_RESET:
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_POST_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6571/* wake up mptbase_cmds */
6572 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6573 ioc->mptbase_cmds.status |=
6574 MPT_MGMT_STATUS_DID_IOCRESET;
6575 complete(&ioc->mptbase_cmds.done);
6576 }
6577/* wake up taskmgmt_cmds */
6578 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6579 ioc->taskmgmt_cmds.status |=
6580 MPT_MGMT_STATUS_DID_IOCRESET;
6581 complete(&ioc->taskmgmt_cmds.done);
6582 }
6583 break;
6584 default:
6585 break;
6586 }
6587
6588 return 1; /* currently means nothing really */
6589}
6590
6591
6592#ifdef CONFIG_PROC_FS /* { */
6593/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6594/*
6595 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6596 */
6597/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598/**
6599 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6600 *
6601 * Returns 0 for success, non-zero for failure.
6602 */
6603static int
6604procmpt_create(void)
6605{
6606 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6607 if (mpt_proc_root_dir == NULL)
6608 return -ENOTDIR;
6609
6610 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6611 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6612 return 0;
6613}
6614
6615/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6616/**
6617 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6618 *
6619 * Returns 0 for success, non-zero for failure.
6620 */
6621static void
6622procmpt_destroy(void)
6623{
6624 remove_proc_entry("version", mpt_proc_root_dir);
6625 remove_proc_entry("summary", mpt_proc_root_dir);
6626 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6627}
6628
6629/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6630/*
6631 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6632 */
6633static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6634
6635static int mpt_summary_proc_show(struct seq_file *m, void *v)
6636{
6637 MPT_ADAPTER *ioc = m->private;
6638
6639 if (ioc) {
6640 seq_mpt_print_ioc_summary(ioc, m, 1);
6641 } else {
6642 list_for_each_entry(ioc, &ioc_list, list) {
6643 seq_mpt_print_ioc_summary(ioc, m, 1);
6644 }
6645 }
6646
6647 return 0;
6648}
6649
6650static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6651{
6652 return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6653}
6654
6655static const struct file_operations mpt_summary_proc_fops = {
6656 .owner = THIS_MODULE,
6657 .open = mpt_summary_proc_open,
6658 .read = seq_read,
6659 .llseek = seq_lseek,
6660 .release = single_release,
6661};
6662
6663static int mpt_version_proc_show(struct seq_file *m, void *v)
6664{
6665 u8 cb_idx;
6666 int scsi, fc, sas, lan, ctl, targ, dmp;
6667 char *drvname;
6668
6669 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6670 seq_printf(m, " Fusion MPT base driver\n");
6671
6672 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6673 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6674 drvname = NULL;
6675 if (MptCallbacks[cb_idx]) {
6676 switch (MptDriverClass[cb_idx]) {
6677 case MPTSPI_DRIVER:
6678 if (!scsi++) drvname = "SPI host";
6679 break;
6680 case MPTFC_DRIVER:
6681 if (!fc++) drvname = "FC host";
6682 break;
6683 case MPTSAS_DRIVER:
6684 if (!sas++) drvname = "SAS host";
6685 break;
6686 case MPTLAN_DRIVER:
6687 if (!lan++) drvname = "LAN";
6688 break;
6689 case MPTSTM_DRIVER:
6690 if (!targ++) drvname = "SCSI target";
6691 break;
6692 case MPTCTL_DRIVER:
6693 if (!ctl++) drvname = "ioctl";
6694 break;
6695 }
6696
6697 if (drvname)
6698 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6699 }
6700 }
6701
6702 return 0;
6703}
6704
6705static int mpt_version_proc_open(struct inode *inode, struct file *file)
6706{
6707 return single_open(file, mpt_version_proc_show, NULL);
6708}
6709
6710static const struct file_operations mpt_version_proc_fops = {
6711 .owner = THIS_MODULE,
6712 .open = mpt_version_proc_open,
6713 .read = seq_read,
6714 .llseek = seq_lseek,
6715 .release = single_release,
6716};
6717
6718static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6719{
6720 MPT_ADAPTER *ioc = m->private;
6721 char expVer[32];
6722 int sz;
6723 int p;
6724
6725 mpt_get_fw_exp_ver(expVer, ioc);
6726
6727 seq_printf(m, "%s:", ioc->name);
6728 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6729 seq_printf(m, " (f/w download boot flag set)");
6730// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6731// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6732
6733 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6734 ioc->facts.ProductID,
6735 ioc->prod_name);
6736 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6737 if (ioc->facts.FWImageSize)
6738 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6739 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6740 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6741 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6742
6743 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6744 ioc->facts.CurrentHostMfaHighAddr);
6745 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6746 ioc->facts.CurrentSenseBufferHighAddr);
6747
6748 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6749 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6750
6751 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6752 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6753 /*
6754 * Rounding UP to nearest 4-kB boundary here...
6755 */
6756 sz = (ioc->req_sz * ioc->req_depth) + 128;
6757 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6758 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6759 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6760 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6761 4*ioc->facts.RequestFrameSize,
6762 ioc->facts.GlobalCredits);
6763
6764 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6765 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6766 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6767 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6768 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6769 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6770 ioc->facts.CurReplyFrameSize,
6771 ioc->facts.ReplyQueueDepth);
6772
6773 seq_printf(m, " MaxDevices = %d\n",
6774 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6775 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6776
6777 /* per-port info */
6778 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6779 seq_printf(m, " PortNumber = %d (of %d)\n",
6780 p+1,
6781 ioc->facts.NumberOfPorts);
6782 if (ioc->bus_type == FC) {
6783 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6784 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6785 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6786 a[5], a[4], a[3], a[2], a[1], a[0]);
6787 }
6788 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6789 ioc->fc_port_page0[p].WWNN.High,
6790 ioc->fc_port_page0[p].WWNN.Low,
6791 ioc->fc_port_page0[p].WWPN.High,
6792 ioc->fc_port_page0[p].WWPN.Low);
6793 }
6794 }
6795
6796 return 0;
6797}
6798
6799static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6800{
6801 return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6802}
6803
6804static const struct file_operations mpt_iocinfo_proc_fops = {
6805 .owner = THIS_MODULE,
6806 .open = mpt_iocinfo_proc_open,
6807 .read = seq_read,
6808 .llseek = seq_lseek,
6809 .release = single_release,
6810};
6811#endif /* CONFIG_PROC_FS } */
6812
6813/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6814static void
6815mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6816{
6817 buf[0] ='\0';
6818 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6819 sprintf(buf, " (Exp %02d%02d)",
6820 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6821 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6822
6823 /* insider hack! */
6824 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6825 strcat(buf, " [MDBG]");
6826 }
6827}
6828
6829/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6830/**
6831 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6832 * @ioc: Pointer to MPT_ADAPTER structure
6833 * @buffer: Pointer to buffer where IOC summary info should be written
6834 * @size: Pointer to number of bytes we wrote (set by this routine)
6835 * @len: Offset at which to start writing in buffer
6836 * @showlan: Display LAN stuff?
6837 *
6838 * This routine writes (english readable) ASCII text, which represents
6839 * a summary of IOC information, to a buffer.
6840 */
6841void
6842mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6843{
6844 char expVer[32];
6845 int y;
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6864 a[5], a[4], a[3], a[2], a[1], a[0]);
6865 }
6866
6867 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6868
6869 if (!ioc->active)
6870 y += sprintf(buffer+len+y, " (disabled)");
6871
6872 y += sprintf(buffer+len+y, "\n");
6873
6874 *size = y;
6875}
6876
6877#ifdef CONFIG_PROC_FS
6878static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6879{
6880 char expVer[32];
6881
6882 mpt_get_fw_exp_ver(expVer, ioc);
6883
6884 /*
6885 * Shorter summary of attached ioc's...
6886 */
6887 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6888 ioc->name,
6889 ioc->prod_name,
6890 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6891 ioc->facts.FWVersion.Word,
6892 expVer,
6893 ioc->facts.NumberOfPorts,
6894 ioc->req_depth);
6895
6896 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6897 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6898 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6899 a[5], a[4], a[3], a[2], a[1], a[0]);
6900 }
6901
6902 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6903
6904 if (!ioc->active)
6905 seq_printf(m, " (disabled)");
6906
6907 seq_putc(m, '\n');
6908}
6909#endif
6910
6911/**
6912 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6913 * @ioc: Pointer to MPT_ADAPTER structure
6914 *
6915 * Returns 0 for SUCCESS or -1 if FAILED.
6916 *
6917 * If -1 is return, then it was not possible to set the flags
6918 **/
6919int
6920mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6921{
6922 unsigned long flags;
6923 int retval;
6924
6925 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6926 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6927 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6928 retval = -1;
6929 goto out;
6930 }
6931 retval = 0;
6932 ioc->taskmgmt_in_progress = 1;
6933 ioc->taskmgmt_quiesce_io = 1;
6934 if (ioc->alt_ioc) {
6935 ioc->alt_ioc->taskmgmt_in_progress = 1;
6936 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6937 }
6938 out:
6939 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6940 return retval;
6941}
6942EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6943
6944/**
6945 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6946 * @ioc: Pointer to MPT_ADAPTER structure
6947 *
6948 **/
6949void
6950mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6951{
6952 unsigned long flags;
6953
6954 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6955 ioc->taskmgmt_in_progress = 0;
6956 ioc->taskmgmt_quiesce_io = 0;
6957 if (ioc->alt_ioc) {
6958 ioc->alt_ioc->taskmgmt_in_progress = 0;
6959 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6960 }
6961 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6962}
6963EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6964
6965
6966/**
6967 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6968 * the kernel
6969 * @ioc: Pointer to MPT_ADAPTER structure
6970 *
6971 **/
6972void
6973mpt_halt_firmware(MPT_ADAPTER *ioc)
6974{
6975 u32 ioc_raw_state;
6976
6977 ioc_raw_state = mpt_GetIocState(ioc, 0);
6978
6979 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6980 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6981 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6982 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6983 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6984 } else {
6985 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6986 panic("%s: Firmware is halted due to command timeout\n",
6987 ioc->name);
6988 }
6989}
6990EXPORT_SYMBOL(mpt_halt_firmware);
6991
6992/**
6993 * mpt_SoftResetHandler - Issues a less expensive reset
6994 * @ioc: Pointer to MPT_ADAPTER structure
6995 * @sleepFlag: Indicates if sleep or schedule must be called.
6996 *
6997 * Returns 0 for SUCCESS or -1 if FAILED.
6998 *
6999 * Message Unit Reset - instructs the IOC to reset the Reply Post and
7000 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
7001 * All posted buffers are freed, and event notification is turned off.
7002 * IOC doesn't reply to any outstanding request. This will transfer IOC
7003 * to READY state.
7004 **/
7005static int
7006mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7007{
7008 int rc;
7009 int ii;
7010 u8 cb_idx;
7011 unsigned long flags;
7012 u32 ioc_state;
7013 unsigned long time_count;
7014
7015 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7016 ioc->name));
7017
7018 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7019
7020 if (mpt_fwfault_debug)
7021 mpt_halt_firmware(ioc);
7022
7023 if (ioc_state == MPI_IOC_STATE_FAULT ||
7024 ioc_state == MPI_IOC_STATE_RESET) {
7025 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7026 "skipping, either in FAULT or RESET state!\n", ioc->name));
7027 return -1;
7028 }
7029
7030 if (ioc->bus_type == FC) {
7031 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7032 "skipping, because the bus type is FC!\n", ioc->name));
7033 return -1;
7034 }
7035
7036 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7037 if (ioc->ioc_reset_in_progress) {
7038 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7039 return -1;
7040 }
7041 ioc->ioc_reset_in_progress = 1;
7042 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7043
7044 rc = -1;
7045
7046 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7047 if (MptResetHandlers[cb_idx])
7048 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7049 }
7050
7051 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7052 if (ioc->taskmgmt_in_progress) {
7053 ioc->ioc_reset_in_progress = 0;
7054 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7055 return -1;
7056 }
7057 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7058 /* Disable reply interrupts (also blocks FreeQ) */
7059 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7060 ioc->active = 0;
7061 time_count = jiffies;
7062
7063 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7064
7065 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7066 if (MptResetHandlers[cb_idx])
7067 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7068 }
7069
7070 if (rc)
7071 goto out;
7072
7073 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7074 if (ioc_state != MPI_IOC_STATE_READY)
7075 goto out;
7076
7077 for (ii = 0; ii < 5; ii++) {
7078 /* Get IOC facts! Allow 5 retries */
7079 rc = GetIocFacts(ioc, sleepFlag,
7080 MPT_HOSTEVENT_IOC_RECOVER);
7081 if (rc == 0)
7082 break;
7083 if (sleepFlag == CAN_SLEEP)
7084 msleep(100);
7085 else
7086 mdelay(100);
7087 }
7088 if (ii == 5)
7089 goto out;
7090
7091 rc = PrimeIocFifos(ioc);
7092 if (rc != 0)
7093 goto out;
7094
7095 rc = SendIocInit(ioc, sleepFlag);
7096 if (rc != 0)
7097 goto out;
7098
7099 rc = SendEventNotification(ioc, 1, sleepFlag);
7100 if (rc != 0)
7101 goto out;
7102
7103 if (ioc->hard_resets < -1)
7104 ioc->hard_resets++;
7105
7106 /*
7107 * At this point, we know soft reset succeeded.
7108 */
7109
7110 ioc->active = 1;
7111 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7112
7113 out:
7114 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7115 ioc->ioc_reset_in_progress = 0;
7116 ioc->taskmgmt_quiesce_io = 0;
7117 ioc->taskmgmt_in_progress = 0;
7118 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7119
7120 if (ioc->active) { /* otherwise, hard reset coming */
7121 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7122 if (MptResetHandlers[cb_idx])
7123 mpt_signal_reset(cb_idx, ioc,
7124 MPT_IOC_POST_RESET);
7125 }
7126 }
7127
7128 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7129 "SoftResetHandler: completed (%d seconds): %s\n",
7130 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7131 ((rc == 0) ? "SUCCESS" : "FAILED")));
7132
7133 return rc;
7134}
7135
7136/**
7137 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7138 * @ioc: Pointer to MPT_ADAPTER structure
7139 * @sleepFlag: Indicates if sleep or schedule must be called.
7140 *
7141 * Returns 0 for SUCCESS or -1 if FAILED.
7142 * Try for softreset first, only if it fails go for expensive
7143 * HardReset.
7144 **/
7145int
7146mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7147 int ret = -1;
7148
7149 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7150 if (ret == 0)
7151 return ret;
7152 ret = mpt_HardResetHandler(ioc, sleepFlag);
7153 return ret;
7154}
7155EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7156
7157/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7158/*
7159 * Reset Handling
7160 */
7161/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7162/**
7163 * mpt_HardResetHandler - Generic reset handler
7164 * @ioc: Pointer to MPT_ADAPTER structure
7165 * @sleepFlag: Indicates if sleep or schedule must be called.
7166 *
7167 * Issues SCSI Task Management call based on input arg values.
7168 * If TaskMgmt fails, returns associated SCSI request.
7169 *
7170 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7171 * or a non-interrupt thread. In the former, must not call schedule().
7172 *
7173 * Note: A return of -1 is a FATAL error case, as it means a
7174 * FW reload/initialization failed.
7175 *
7176 * Returns 0 for SUCCESS or -1 if FAILED.
7177 */
7178int
7179mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7180{
7181 int rc;
7182 u8 cb_idx;
7183 unsigned long flags;
7184 unsigned long time_count;
7185
7186 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7187#ifdef MFCNT
7188 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7189 printk("MF count 0x%x !\n", ioc->mfcnt);
7190#endif
7191 if (mpt_fwfault_debug)
7192 mpt_halt_firmware(ioc);
7193
7194 /* Reset the adapter. Prevent more than 1 call to
7195 * mpt_do_ioc_recovery at any instant in time.
7196 */
7197 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7198 if (ioc->ioc_reset_in_progress) {
7199 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7200 ioc->wait_on_reset_completion = 1;
7201 do {
7202 ssleep(1);
7203 } while (ioc->ioc_reset_in_progress == 1);
7204 ioc->wait_on_reset_completion = 0;
7205 return ioc->reset_status;
7206 }
7207 if (ioc->wait_on_reset_completion) {
7208 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7209 rc = 0;
7210 time_count = jiffies;
7211 goto exit;
7212 }
7213 ioc->ioc_reset_in_progress = 1;
7214 if (ioc->alt_ioc)
7215 ioc->alt_ioc->ioc_reset_in_progress = 1;
7216 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7217
7218
7219 /* The SCSI driver needs to adjust timeouts on all current
7220 * commands prior to the diagnostic reset being issued.
7221 * Prevents timeouts occurring during a diagnostic reset...very bad.
7222 * For all other protocol drivers, this is a no-op.
7223 */
7224 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7225 if (MptResetHandlers[cb_idx]) {
7226 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7227 if (ioc->alt_ioc)
7228 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7229 MPT_IOC_SETUP_RESET);
7230 }
7231 }
7232
7233 time_count = jiffies;
7234 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7235 if (rc != 0) {
7236 printk(KERN_WARNING MYNAM
7237 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7238 rc, ioc->name, mpt_GetIocState(ioc, 0));
7239 } else {
7240 if (ioc->hard_resets < -1)
7241 ioc->hard_resets++;
7242 }
7243
7244 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7245 ioc->ioc_reset_in_progress = 0;
7246 ioc->taskmgmt_quiesce_io = 0;
7247 ioc->taskmgmt_in_progress = 0;
7248 ioc->reset_status = rc;
7249 if (ioc->alt_ioc) {
7250 ioc->alt_ioc->ioc_reset_in_progress = 0;
7251 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7252 ioc->alt_ioc->taskmgmt_in_progress = 0;
7253 }
7254 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7255
7256 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7257 if (MptResetHandlers[cb_idx]) {
7258 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7259 if (ioc->alt_ioc)
7260 mpt_signal_reset(cb_idx,
7261 ioc->alt_ioc, MPT_IOC_POST_RESET);
7262 }
7263 }
7264exit:
7265 dtmprintk(ioc,
7266 printk(MYIOC_s_DEBUG_FMT
7267 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7268 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7269 "SUCCESS" : "FAILED")));
7270
7271 return rc;
7272}
7273
7274#ifdef CONFIG_FUSION_LOGGING
7275static void
7276mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7277{
7278 char *ds = NULL;
7279 u32 evData0;
7280 int ii;
7281 u8 event;
7282 char *evStr = ioc->evStr;
7283
7284 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7285 evData0 = le32_to_cpu(pEventReply->Data[0]);
7286
7287 switch(event) {
7288 case MPI_EVENT_NONE:
7289 ds = "None";
7290 break;
7291 case MPI_EVENT_LOG_DATA:
7292 ds = "Log Data";
7293 break;
7294 case MPI_EVENT_STATE_CHANGE:
7295 ds = "State Change";
7296 break;
7297 case MPI_EVENT_UNIT_ATTENTION:
7298 ds = "Unit Attention";
7299 break;
7300 case MPI_EVENT_IOC_BUS_RESET:
7301 ds = "IOC Bus Reset";
7302 break;
7303 case MPI_EVENT_EXT_BUS_RESET:
7304 ds = "External Bus Reset";
7305 break;
7306 case MPI_EVENT_RESCAN:
7307 ds = "Bus Rescan Event";
7308 break;
7309 case MPI_EVENT_LINK_STATUS_CHANGE:
7310 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7311 ds = "Link Status(FAILURE) Change";
7312 else
7313 ds = "Link Status(ACTIVE) Change";
7314 break;
7315 case MPI_EVENT_LOOP_STATE_CHANGE:
7316 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7317 ds = "Loop State(LIP) Change";
7318 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7319 ds = "Loop State(LPE) Change";
7320 else
7321 ds = "Loop State(LPB) Change";
7322 break;
7323 case MPI_EVENT_LOGOUT:
7324 ds = "Logout";
7325 break;
7326 case MPI_EVENT_EVENT_CHANGE:
7327 if (evData0)
7328 ds = "Events ON";
7329 else
7330 ds = "Events OFF";
7331 break;
7332 case MPI_EVENT_INTEGRATED_RAID:
7333 {
7334 u8 ReasonCode = (u8)(evData0 >> 16);
7335 switch (ReasonCode) {
7336 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7337 ds = "Integrated Raid: Volume Created";
7338 break;
7339 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7340 ds = "Integrated Raid: Volume Deleted";
7341 break;
7342 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7343 ds = "Integrated Raid: Volume Settings Changed";
7344 break;
7345 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7346 ds = "Integrated Raid: Volume Status Changed";
7347 break;
7348 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7349 ds = "Integrated Raid: Volume Physdisk Changed";
7350 break;
7351 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7352 ds = "Integrated Raid: Physdisk Created";
7353 break;
7354 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7355 ds = "Integrated Raid: Physdisk Deleted";
7356 break;
7357 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7358 ds = "Integrated Raid: Physdisk Settings Changed";
7359 break;
7360 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7361 ds = "Integrated Raid: Physdisk Status Changed";
7362 break;
7363 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7364 ds = "Integrated Raid: Domain Validation Needed";
7365 break;
7366 case MPI_EVENT_RAID_RC_SMART_DATA :
7367 ds = "Integrated Raid; Smart Data";
7368 break;
7369 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7370 ds = "Integrated Raid: Replace Action Started";
7371 break;
7372 default:
7373 ds = "Integrated Raid";
7374 break;
7375 }
7376 break;
7377 }
7378 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7379 ds = "SCSI Device Status Change";
7380 break;
7381 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7382 {
7383 u8 id = (u8)(evData0);
7384 u8 channel = (u8)(evData0 >> 8);
7385 u8 ReasonCode = (u8)(evData0 >> 16);
7386 switch (ReasonCode) {
7387 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Added: "
7390 "id=%d channel=%d", id, channel);
7391 break;
7392 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: Deleted: "
7395 "id=%d channel=%d", id, channel);
7396 break;
7397 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: SMART Data: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7403 snprintf(evStr, EVENT_DESCR_STR_SZ,
7404 "SAS Device Status Change: No Persistancy: "
7405 "id=%d channel=%d", id, channel);
7406 break;
7407 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7408 snprintf(evStr, EVENT_DESCR_STR_SZ,
7409 "SAS Device Status Change: Unsupported Device "
7410 "Discovered : id=%d channel=%d", id, channel);
7411 break;
7412 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7413 snprintf(evStr, EVENT_DESCR_STR_SZ,
7414 "SAS Device Status Change: Internal Device "
7415 "Reset : id=%d channel=%d", id, channel);
7416 break;
7417 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "SAS Device Status Change: Internal Task "
7420 "Abort : id=%d channel=%d", id, channel);
7421 break;
7422 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7423 snprintf(evStr, EVENT_DESCR_STR_SZ,
7424 "SAS Device Status Change: Internal Abort "
7425 "Task Set : id=%d channel=%d", id, channel);
7426 break;
7427 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7428 snprintf(evStr, EVENT_DESCR_STR_SZ,
7429 "SAS Device Status Change: Internal Clear "
7430 "Task Set : id=%d channel=%d", id, channel);
7431 break;
7432 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS Device Status Change: Internal Query "
7435 "Task : id=%d channel=%d", id, channel);
7436 break;
7437 default:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS Device Status Change: Unknown: "
7440 "id=%d channel=%d", id, channel);
7441 break;
7442 }
7443 break;
7444 }
7445 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7446 ds = "Bus Timer Expired";
7447 break;
7448 case MPI_EVENT_QUEUE_FULL:
7449 {
7450 u16 curr_depth = (u16)(evData0 >> 16);
7451 u8 channel = (u8)(evData0 >> 8);
7452 u8 id = (u8)(evData0);
7453
7454 snprintf(evStr, EVENT_DESCR_STR_SZ,
7455 "Queue Full: channel=%d id=%d depth=%d",
7456 channel, id, curr_depth);
7457 break;
7458 }
7459 case MPI_EVENT_SAS_SES:
7460 ds = "SAS SES Event";
7461 break;
7462 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7463 ds = "Persistent Table Full";
7464 break;
7465 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7466 {
7467 u8 LinkRates = (u8)(evData0 >> 8);
7468 u8 PhyNumber = (u8)(evData0);
7469 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7470 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7471 switch (LinkRates) {
7472 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7473 snprintf(evStr, EVENT_DESCR_STR_SZ,
7474 "SAS PHY Link Status: Phy=%d:"
7475 " Rate Unknown",PhyNumber);
7476 break;
7477 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7478 snprintf(evStr, EVENT_DESCR_STR_SZ,
7479 "SAS PHY Link Status: Phy=%d:"
7480 " Phy Disabled",PhyNumber);
7481 break;
7482 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7483 snprintf(evStr, EVENT_DESCR_STR_SZ,
7484 "SAS PHY Link Status: Phy=%d:"
7485 " Failed Speed Nego",PhyNumber);
7486 break;
7487 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7488 snprintf(evStr, EVENT_DESCR_STR_SZ,
7489 "SAS PHY Link Status: Phy=%d:"
7490 " Sata OOB Completed",PhyNumber);
7491 break;
7492 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "SAS PHY Link Status: Phy=%d:"
7495 " Rate 1.5 Gbps",PhyNumber);
7496 break;
7497 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7498 snprintf(evStr, EVENT_DESCR_STR_SZ,
7499 "SAS PHY Link Status: Phy=%d:"
7500 " Rate 3.0 Gbps", PhyNumber);
7501 break;
7502 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "SAS PHY Link Status: Phy=%d:"
7505 " Rate 6.0 Gbps", PhyNumber);
7506 break;
7507 default:
7508 snprintf(evStr, EVENT_DESCR_STR_SZ,
7509 "SAS PHY Link Status: Phy=%d", PhyNumber);
7510 break;
7511 }
7512 break;
7513 }
7514 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7515 ds = "SAS Discovery Error";
7516 break;
7517 case MPI_EVENT_IR_RESYNC_UPDATE:
7518 {
7519 u8 resync_complete = (u8)(evData0 >> 16);
7520 snprintf(evStr, EVENT_DESCR_STR_SZ,
7521 "IR Resync Update: Complete = %d:",resync_complete);
7522 break;
7523 }
7524 case MPI_EVENT_IR2:
7525 {
7526 u8 id = (u8)(evData0);
7527 u8 channel = (u8)(evData0 >> 8);
7528 u8 phys_num = (u8)(evData0 >> 24);
7529 u8 ReasonCode = (u8)(evData0 >> 16);
7530
7531 switch (ReasonCode) {
7532 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7533 snprintf(evStr, EVENT_DESCR_STR_SZ,
7534 "IR2: LD State Changed: "
7535 "id=%d channel=%d phys_num=%d",
7536 id, channel, phys_num);
7537 break;
7538 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7539 snprintf(evStr, EVENT_DESCR_STR_SZ,
7540 "IR2: PD State Changed "
7541 "id=%d channel=%d phys_num=%d",
7542 id, channel, phys_num);
7543 break;
7544 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7545 snprintf(evStr, EVENT_DESCR_STR_SZ,
7546 "IR2: Bad Block Table Full: "
7547 "id=%d channel=%d phys_num=%d",
7548 id, channel, phys_num);
7549 break;
7550 case MPI_EVENT_IR2_RC_PD_INSERTED:
7551 snprintf(evStr, EVENT_DESCR_STR_SZ,
7552 "IR2: PD Inserted: "
7553 "id=%d channel=%d phys_num=%d",
7554 id, channel, phys_num);
7555 break;
7556 case MPI_EVENT_IR2_RC_PD_REMOVED:
7557 snprintf(evStr, EVENT_DESCR_STR_SZ,
7558 "IR2: PD Removed: "
7559 "id=%d channel=%d phys_num=%d",
7560 id, channel, phys_num);
7561 break;
7562 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7563 snprintf(evStr, EVENT_DESCR_STR_SZ,
7564 "IR2: Foreign CFG Detected: "
7565 "id=%d channel=%d phys_num=%d",
7566 id, channel, phys_num);
7567 break;
7568 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7569 snprintf(evStr, EVENT_DESCR_STR_SZ,
7570 "IR2: Rebuild Medium Error: "
7571 "id=%d channel=%d phys_num=%d",
7572 id, channel, phys_num);
7573 break;
7574 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7575 snprintf(evStr, EVENT_DESCR_STR_SZ,
7576 "IR2: Dual Port Added: "
7577 "id=%d channel=%d phys_num=%d",
7578 id, channel, phys_num);
7579 break;
7580 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7581 snprintf(evStr, EVENT_DESCR_STR_SZ,
7582 "IR2: Dual Port Removed: "
7583 "id=%d channel=%d phys_num=%d",
7584 id, channel, phys_num);
7585 break;
7586 default:
7587 ds = "IR2";
7588 break;
7589 }
7590 break;
7591 }
7592 case MPI_EVENT_SAS_DISCOVERY:
7593 {
7594 if (evData0)
7595 ds = "SAS Discovery: Start";
7596 else
7597 ds = "SAS Discovery: Stop";
7598 break;
7599 }
7600 case MPI_EVENT_LOG_ENTRY_ADDED:
7601 ds = "SAS Log Entry Added";
7602 break;
7603
7604 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7605 {
7606 u8 phy_num = (u8)(evData0);
7607 u8 port_num = (u8)(evData0 >> 8);
7608 u8 port_width = (u8)(evData0 >> 16);
7609 u8 primative = (u8)(evData0 >> 24);
7610 snprintf(evStr, EVENT_DESCR_STR_SZ,
7611 "SAS Broadcase Primative: phy=%d port=%d "
7612 "width=%d primative=0x%02x",
7613 phy_num, port_num, port_width, primative);
7614 break;
7615 }
7616
7617 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7618 {
7619 u8 reason = (u8)(evData0);
7620
7621 switch (reason) {
7622 case MPI_EVENT_SAS_INIT_RC_ADDED:
7623 ds = "SAS Initiator Status Change: Added";
7624 break;
7625 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7626 ds = "SAS Initiator Status Change: Deleted";
7627 break;
7628 default:
7629 ds = "SAS Initiator Status Change";
7630 break;
7631 }
7632 break;
7633 }
7634
7635 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7636 {
7637 u8 max_init = (u8)(evData0);
7638 u8 current_init = (u8)(evData0 >> 8);
7639
7640 snprintf(evStr, EVENT_DESCR_STR_SZ,
7641 "SAS Initiator Device Table Overflow: max initiators=%02d "
7642 "current initators=%02d",
7643 max_init, current_init);
7644 break;
7645 }
7646 case MPI_EVENT_SAS_SMP_ERROR:
7647 {
7648 u8 status = (u8)(evData0);
7649 u8 port_num = (u8)(evData0 >> 8);
7650 u8 result = (u8)(evData0 >> 16);
7651
7652 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7653 snprintf(evStr, EVENT_DESCR_STR_SZ,
7654 "SAS SMP Error: port=%d result=0x%02x",
7655 port_num, result);
7656 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7657 snprintf(evStr, EVENT_DESCR_STR_SZ,
7658 "SAS SMP Error: port=%d : CRC Error",
7659 port_num);
7660 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7661 snprintf(evStr, EVENT_DESCR_STR_SZ,
7662 "SAS SMP Error: port=%d : Timeout",
7663 port_num);
7664 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7665 snprintf(evStr, EVENT_DESCR_STR_SZ,
7666 "SAS SMP Error: port=%d : No Destination",
7667 port_num);
7668 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7669 snprintf(evStr, EVENT_DESCR_STR_SZ,
7670 "SAS SMP Error: port=%d : Bad Destination",
7671 port_num);
7672 else
7673 snprintf(evStr, EVENT_DESCR_STR_SZ,
7674 "SAS SMP Error: port=%d : status=0x%02x",
7675 port_num, status);
7676 break;
7677 }
7678
7679 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7680 {
7681 u8 reason = (u8)(evData0);
7682
7683 switch (reason) {
7684 case MPI_EVENT_SAS_EXP_RC_ADDED:
7685 ds = "Expander Status Change: Added";
7686 break;
7687 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7688 ds = "Expander Status Change: Deleted";
7689 break;
7690 default:
7691 ds = "Expander Status Change";
7692 break;
7693 }
7694 break;
7695 }
7696
7697 /*
7698 * MPT base "custom" events may be added here...
7699 */
7700 default:
7701 ds = "Unknown";
7702 break;
7703 }
7704 if (ds)
7705 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7706
7707
7708 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7709 "MPT event:(%02Xh) : %s\n",
7710 ioc->name, event, evStr));
7711
7712 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7713 ": Event data:\n"));
7714 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7715 devtverboseprintk(ioc, printk(" %08x",
7716 le32_to_cpu(pEventReply->Data[ii])));
7717 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7718}
7719#endif
7720/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7721/**
7722 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7723 * @ioc: Pointer to MPT_ADAPTER structure
7724 * @pEventReply: Pointer to EventNotification reply frame
7725 * @evHandlers: Pointer to integer, number of event handlers
7726 *
7727 * Routes a received EventNotificationReply to all currently registered
7728 * event handlers.
7729 * Returns sum of event handlers return values.
7730 */
7731static int
7732ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7733{
7734 u16 evDataLen;
7735 u32 evData0 = 0;
7736 int ii;
7737 u8 cb_idx;
7738 int r = 0;
7739 int handlers = 0;
7740 u8 event;
7741
7742 /*
7743 * Do platform normalization of values
7744 */
7745 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7746 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7747 if (evDataLen) {
7748 evData0 = le32_to_cpu(pEventReply->Data[0]);
7749 }
7750
7751#ifdef CONFIG_FUSION_LOGGING
7752 if (evDataLen)
7753 mpt_display_event_info(ioc, pEventReply);
7754#endif
7755
7756 /*
7757 * Do general / base driver event processing
7758 */
7759 switch(event) {
7760 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7761 if (evDataLen) {
7762 u8 evState = evData0 & 0xFF;
7763
7764 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7765
7766 /* Update EventState field in cached IocFacts */
7767 if (ioc->facts.Function) {
7768 ioc->facts.EventState = evState;
7769 }
7770 }
7771 break;
7772 case MPI_EVENT_INTEGRATED_RAID:
7773 mptbase_raid_process_event_data(ioc,
7774 (MpiEventDataRaid_t *)pEventReply->Data);
7775 break;
7776 default:
7777 break;
7778 }
7779
7780 /*
7781 * Should this event be logged? Events are written sequentially.
7782 * When buffer is full, start again at the top.
7783 */
7784 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7785 int idx;
7786
7787 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7788
7789 ioc->events[idx].event = event;
7790 ioc->events[idx].eventContext = ioc->eventContext;
7791
7792 for (ii = 0; ii < 2; ii++) {
7793 if (ii < evDataLen)
7794 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7795 else
7796 ioc->events[idx].data[ii] = 0;
7797 }
7798
7799 ioc->eventContext++;
7800 }
7801
7802
7803 /*
7804 * Call each currently registered protocol event handler.
7805 */
7806 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7807 if (MptEvHandlers[cb_idx]) {
7808 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7809 "Routing Event to event handler #%d\n",
7810 ioc->name, cb_idx));
7811 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7812 handlers++;
7813 }
7814 }
7815 /* FIXME? Examine results here? */
7816
7817 /*
7818 * If needed, send (a single) EventAck.
7819 */
7820 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7821 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7822 "EventAck required\n",ioc->name));
7823 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7824 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7825 ioc->name, ii));
7826 }
7827 }
7828
7829 *evHandlers = handlers;
7830 return r;
7831}
7832
7833/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7834/**
7835 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7836 * @ioc: Pointer to MPT_ADAPTER structure
7837 * @log_info: U32 LogInfo reply word from the IOC
7838 *
7839 * Refer to lsi/mpi_log_fc.h.
7840 */
7841static void
7842mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7843{
7844 char *desc = "unknown";
7845
7846 switch (log_info & 0xFF000000) {
7847 case MPI_IOCLOGINFO_FC_INIT_BASE:
7848 desc = "FCP Initiator";
7849 break;
7850 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7851 desc = "FCP Target";
7852 break;
7853 case MPI_IOCLOGINFO_FC_LAN_BASE:
7854 desc = "LAN";
7855 break;
7856 case MPI_IOCLOGINFO_FC_MSG_BASE:
7857 desc = "MPI Message Layer";
7858 break;
7859 case MPI_IOCLOGINFO_FC_LINK_BASE:
7860 desc = "FC Link";
7861 break;
7862 case MPI_IOCLOGINFO_FC_CTX_BASE:
7863 desc = "Context Manager";
7864 break;
7865 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7866 desc = "Invalid Field Offset";
7867 break;
7868 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7869 desc = "State Change Info";
7870 break;
7871 }
7872
7873 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7874 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7875}
7876
7877/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7878/**
7879 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7880 * @ioc: Pointer to MPT_ADAPTER structure
7881 * @log_info: U32 LogInfo word from the IOC
7882 *
7883 * Refer to lsi/sp_log.h.
7884 */
7885static void
7886mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7887{
7888 u32 info = log_info & 0x00FF0000;
7889 char *desc = "unknown";
7890
7891 switch (info) {
7892 case 0x00010000:
7893 desc = "bug! MID not found";
7894 break;
7895
7896 case 0x00020000:
7897 desc = "Parity Error";
7898 break;
7899
7900 case 0x00030000:
7901 desc = "ASYNC Outbound Overrun";
7902 break;
7903
7904 case 0x00040000:
7905 desc = "SYNC Offset Error";
7906 break;
7907
7908 case 0x00050000:
7909 desc = "BM Change";
7910 break;
7911
7912 case 0x00060000:
7913 desc = "Msg In Overflow";
7914 break;
7915
7916 case 0x00070000:
7917 desc = "DMA Error";
7918 break;
7919
7920 case 0x00080000:
7921 desc = "Outbound DMA Overrun";
7922 break;
7923
7924 case 0x00090000:
7925 desc = "Task Management";
7926 break;
7927
7928 case 0x000A0000:
7929 desc = "Device Problem";
7930 break;
7931
7932 case 0x000B0000:
7933 desc = "Invalid Phase Change";
7934 break;
7935
7936 case 0x000C0000:
7937 desc = "Untagged Table Size";
7938 break;
7939
7940 }
7941
7942 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7943}
7944
7945/* strings for sas loginfo */
7946 static char *originator_str[] = {
7947 "IOP", /* 00h */
7948 "PL", /* 01h */
7949 "IR" /* 02h */
7950 };
7951 static char *iop_code_str[] = {
7952 NULL, /* 00h */
7953 "Invalid SAS Address", /* 01h */
7954 NULL, /* 02h */
7955 "Invalid Page", /* 03h */
7956 "Diag Message Error", /* 04h */
7957 "Task Terminated", /* 05h */
7958 "Enclosure Management", /* 06h */
7959 "Target Mode" /* 07h */
7960 };
7961 static char *pl_code_str[] = {
7962 NULL, /* 00h */
7963 "Open Failure", /* 01h */
7964 "Invalid Scatter Gather List", /* 02h */
7965 "Wrong Relative Offset or Frame Length", /* 03h */
7966 "Frame Transfer Error", /* 04h */
7967 "Transmit Frame Connected Low", /* 05h */
7968 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7969 "SATA Read Log Receive Data Error", /* 07h */
7970 "SATA NCQ Fail All Commands After Error", /* 08h */
7971 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7972 "Receive Frame Invalid Message", /* 0Ah */
7973 "Receive Context Message Valid Error", /* 0Bh */
7974 "Receive Frame Current Frame Error", /* 0Ch */
7975 "SATA Link Down", /* 0Dh */
7976 "Discovery SATA Init W IOS", /* 0Eh */
7977 "Config Invalid Page", /* 0Fh */
7978 "Discovery SATA Init Timeout", /* 10h */
7979 "Reset", /* 11h */
7980 "Abort", /* 12h */
7981 "IO Not Yet Executed", /* 13h */
7982 "IO Executed", /* 14h */
7983 "Persistent Reservation Out Not Affiliation "
7984 "Owner", /* 15h */
7985 "Open Transmit DMA Abort", /* 16h */
7986 "IO Device Missing Delay Retry", /* 17h */
7987 "IO Cancelled Due to Receive Error", /* 18h */
7988 NULL, /* 19h */
7989 NULL, /* 1Ah */
7990 NULL, /* 1Bh */
7991 NULL, /* 1Ch */
7992 NULL, /* 1Dh */
7993 NULL, /* 1Eh */
7994 NULL, /* 1Fh */
7995 "Enclosure Management" /* 20h */
7996 };
7997 static char *ir_code_str[] = {
7998 "Raid Action Error", /* 00h */
7999 NULL, /* 00h */
8000 NULL, /* 01h */
8001 NULL, /* 02h */
8002 NULL, /* 03h */
8003 NULL, /* 04h */
8004 NULL, /* 05h */
8005 NULL, /* 06h */
8006 NULL /* 07h */
8007 };
8008 static char *raid_sub_code_str[] = {
8009 NULL, /* 00h */
8010 "Volume Creation Failed: Data Passed too "
8011 "Large", /* 01h */
8012 "Volume Creation Failed: Duplicate Volumes "
8013 "Attempted", /* 02h */
8014 "Volume Creation Failed: Max Number "
8015 "Supported Volumes Exceeded", /* 03h */
8016 "Volume Creation Failed: DMA Error", /* 04h */
8017 "Volume Creation Failed: Invalid Volume Type", /* 05h */
8018 "Volume Creation Failed: Error Reading "
8019 "MFG Page 4", /* 06h */
8020 "Volume Creation Failed: Creating Internal "
8021 "Structures", /* 07h */
8022 NULL, /* 08h */
8023 NULL, /* 09h */
8024 NULL, /* 0Ah */
8025 NULL, /* 0Bh */
8026 NULL, /* 0Ch */
8027 NULL, /* 0Dh */
8028 NULL, /* 0Eh */
8029 NULL, /* 0Fh */
8030 "Activation failed: Already Active Volume", /* 10h */
8031 "Activation failed: Unsupported Volume Type", /* 11h */
8032 "Activation failed: Too Many Active Volumes", /* 12h */
8033 "Activation failed: Volume ID in Use", /* 13h */
8034 "Activation failed: Reported Failure", /* 14h */
8035 "Activation failed: Importing a Volume", /* 15h */
8036 NULL, /* 16h */
8037 NULL, /* 17h */
8038 NULL, /* 18h */
8039 NULL, /* 19h */
8040 NULL, /* 1Ah */
8041 NULL, /* 1Bh */
8042 NULL, /* 1Ch */
8043 NULL, /* 1Dh */
8044 NULL, /* 1Eh */
8045 NULL, /* 1Fh */
8046 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8047 "Phys Disk failed: Data Passed too Large", /* 21h */
8048 "Phys Disk failed: DMA Error", /* 22h */
8049 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8050 "Phys Disk failed: Creating Phys Disk Config "
8051 "Page", /* 24h */
8052 NULL, /* 25h */
8053 NULL, /* 26h */
8054 NULL, /* 27h */
8055 NULL, /* 28h */
8056 NULL, /* 29h */
8057 NULL, /* 2Ah */
8058 NULL, /* 2Bh */
8059 NULL, /* 2Ch */
8060 NULL, /* 2Dh */
8061 NULL, /* 2Eh */
8062 NULL, /* 2Fh */
8063 "Compatibility Error: IR Disabled", /* 30h */
8064 "Compatibility Error: Inquiry Command Failed", /* 31h */
8065 "Compatibility Error: Device not Direct Access "
8066 "Device ", /* 32h */
8067 "Compatibility Error: Removable Device Found", /* 33h */
8068 "Compatibility Error: Device SCSI Version not "
8069 "2 or Higher", /* 34h */
8070 "Compatibility Error: SATA Device, 48 BIT LBA "
8071 "not Supported", /* 35h */
8072 "Compatibility Error: Device doesn't have "
8073 "512 Byte Block Sizes", /* 36h */
8074 "Compatibility Error: Volume Type Check Failed", /* 37h */
8075 "Compatibility Error: Volume Type is "
8076 "Unsupported by FW", /* 38h */
8077 "Compatibility Error: Disk Drive too Small for "
8078 "use in Volume", /* 39h */
8079 "Compatibility Error: Phys Disk for Create "
8080 "Volume not Found", /* 3Ah */
8081 "Compatibility Error: Too Many or too Few "
8082 "Disks for Volume Type", /* 3Bh */
8083 "Compatibility Error: Disk stripe Sizes "
8084 "Must be 64KB", /* 3Ch */
8085 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8086 };
8087
8088/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8089/**
8090 * mpt_sas_log_info - Log information returned from SAS IOC.
8091 * @ioc: Pointer to MPT_ADAPTER structure
8092 * @log_info: U32 LogInfo reply word from the IOC
8093 * @cb_idx: callback function's handle
8094 *
8095 * Refer to lsi/mpi_log_sas.h.
8096 **/
8097static void
8098mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8099{
8100union loginfo_type {
8101 u32 loginfo;
8102 struct {
8103 u32 subcode:16;
8104 u32 code:8;
8105 u32 originator:4;
8106 u32 bus_type:4;
8107 }dw;
8108};
8109 union loginfo_type sas_loginfo;
8110 char *originator_desc = NULL;
8111 char *code_desc = NULL;
8112 char *sub_code_desc = NULL;
8113
8114 sas_loginfo.loginfo = log_info;
8115 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8116 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8117 return;
8118
8119 originator_desc = originator_str[sas_loginfo.dw.originator];
8120
8121 switch (sas_loginfo.dw.originator) {
8122
8123 case 0: /* IOP */
8124 if (sas_loginfo.dw.code <
8125 ARRAY_SIZE(iop_code_str))
8126 code_desc = iop_code_str[sas_loginfo.dw.code];
8127 break;
8128 case 1: /* PL */
8129 if (sas_loginfo.dw.code <
8130 ARRAY_SIZE(pl_code_str))
8131 code_desc = pl_code_str[sas_loginfo.dw.code];
8132 break;
8133 case 2: /* IR */
8134 if (sas_loginfo.dw.code >=
8135 ARRAY_SIZE(ir_code_str))
8136 break;
8137 code_desc = ir_code_str[sas_loginfo.dw.code];
8138 if (sas_loginfo.dw.subcode >=
8139 ARRAY_SIZE(raid_sub_code_str))
8140 break;
8141 if (sas_loginfo.dw.code == 0)
8142 sub_code_desc =
8143 raid_sub_code_str[sas_loginfo.dw.subcode];
8144 break;
8145 default:
8146 return;
8147 }
8148
8149 if (sub_code_desc != NULL)
8150 printk(MYIOC_s_INFO_FMT
8151 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8152 " SubCode={%s} cb_idx %s\n",
8153 ioc->name, log_info, originator_desc, code_desc,
8154 sub_code_desc, MptCallbacksName[cb_idx]);
8155 else if (code_desc != NULL)
8156 printk(MYIOC_s_INFO_FMT
8157 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8158 " SubCode(0x%04x) cb_idx %s\n",
8159 ioc->name, log_info, originator_desc, code_desc,
8160 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8161 else
8162 printk(MYIOC_s_INFO_FMT
8163 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8164 " SubCode(0x%04x) cb_idx %s\n",
8165 ioc->name, log_info, originator_desc,
8166 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8167 MptCallbacksName[cb_idx]);
8168}
8169
8170/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8171/**
8172 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8173 * @ioc: Pointer to MPT_ADAPTER structure
8174 * @ioc_status: U32 IOCStatus word from IOC
8175 * @mf: Pointer to MPT request frame
8176 *
8177 * Refer to lsi/mpi.h.
8178 **/
8179static void
8180mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8181{
8182 Config_t *pReq = (Config_t *)mf;
8183 char extend_desc[EVENT_DESCR_STR_SZ];
8184 char *desc = NULL;
8185 u32 form;
8186 u8 page_type;
8187
8188 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8189 page_type = pReq->ExtPageType;
8190 else
8191 page_type = pReq->Header.PageType;
8192
8193 /*
8194 * ignore invalid page messages for GET_NEXT_HANDLE
8195 */
8196 form = le32_to_cpu(pReq->PageAddress);
8197 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8198 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8199 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8200 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8201 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8202 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8203 return;
8204 }
8205 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8206 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8207 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8208 return;
8209 }
8210
8211 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8212 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8213 page_type, pReq->Header.PageNumber, pReq->Action, form);
8214
8215 switch (ioc_status) {
8216
8217 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8218 desc = "Config Page Invalid Action";
8219 break;
8220
8221 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8222 desc = "Config Page Invalid Type";
8223 break;
8224
8225 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8226 desc = "Config Page Invalid Page";
8227 break;
8228
8229 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8230 desc = "Config Page Invalid Data";
8231 break;
8232
8233 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8234 desc = "Config Page No Defaults";
8235 break;
8236
8237 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8238 desc = "Config Page Can't Commit";
8239 break;
8240 }
8241
8242 if (!desc)
8243 return;
8244
8245 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8246 ioc->name, ioc_status, desc, extend_desc));
8247}
8248
8249/**
8250 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8251 * @ioc: Pointer to MPT_ADAPTER structure
8252 * @ioc_status: U32 IOCStatus word from IOC
8253 * @mf: Pointer to MPT request frame
8254 *
8255 * Refer to lsi/mpi.h.
8256 **/
8257static void
8258mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8259{
8260 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8261 char *desc = NULL;
8262
8263 switch (status) {
8264
8265/****************************************************************************/
8266/* Common IOCStatus values for all replies */
8267/****************************************************************************/
8268
8269 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8270 desc = "Invalid Function";
8271 break;
8272
8273 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8274 desc = "Busy";
8275 break;
8276
8277 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8278 desc = "Invalid SGL";
8279 break;
8280
8281 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8282 desc = "Internal Error";
8283 break;
8284
8285 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8286 desc = "Reserved";
8287 break;
8288
8289 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8290 desc = "Insufficient Resources";
8291 break;
8292
8293 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8294 desc = "Invalid Field";
8295 break;
8296
8297 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8298 desc = "Invalid State";
8299 break;
8300
8301/****************************************************************************/
8302/* Config IOCStatus values */
8303/****************************************************************************/
8304
8305 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8306 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8307 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8308 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8309 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8310 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8311 mpt_iocstatus_info_config(ioc, status, mf);
8312 break;
8313
8314/****************************************************************************/
8315/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8316/* */
8317/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8318/* */
8319/****************************************************************************/
8320
8321 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8322 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8323 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8324 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8325 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8326 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8327 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8328 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8329 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8330 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8331 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8332 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8333 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8334 break;
8335
8336/****************************************************************************/
8337/* SCSI Target values */
8338/****************************************************************************/
8339
8340 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8341 desc = "Target: Priority IO";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8345 desc = "Target: Invalid Port";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8349 desc = "Target Invalid IO Index:";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8353 desc = "Target: Aborted";
8354 break;
8355
8356 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8357 desc = "Target: No Conn Retryable";
8358 break;
8359
8360 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8361 desc = "Target: No Connection";
8362 break;
8363
8364 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8365 desc = "Target: Transfer Count Mismatch";
8366 break;
8367
8368 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8369 desc = "Target: STS Data not Sent";
8370 break;
8371
8372 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8373 desc = "Target: Data Offset Error";
8374 break;
8375
8376 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8377 desc = "Target: Too Much Write Data";
8378 break;
8379
8380 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8381 desc = "Target: IU Too Short";
8382 break;
8383
8384 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8385 desc = "Target: ACK NAK Timeout";
8386 break;
8387
8388 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8389 desc = "Target: Nak Received";
8390 break;
8391
8392/****************************************************************************/
8393/* Fibre Channel Direct Access values */
8394/****************************************************************************/
8395
8396 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8397 desc = "FC: Aborted";
8398 break;
8399
8400 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8401 desc = "FC: RX ID Invalid";
8402 break;
8403
8404 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8405 desc = "FC: DID Invalid";
8406 break;
8407
8408 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8409 desc = "FC: Node Logged Out";
8410 break;
8411
8412 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8413 desc = "FC: Exchange Canceled";
8414 break;
8415
8416/****************************************************************************/
8417/* LAN values */
8418/****************************************************************************/
8419
8420 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8421 desc = "LAN: Device not Found";
8422 break;
8423
8424 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8425 desc = "LAN: Device Failure";
8426 break;
8427
8428 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8429 desc = "LAN: Transmit Error";
8430 break;
8431
8432 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8433 desc = "LAN: Transmit Aborted";
8434 break;
8435
8436 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8437 desc = "LAN: Receive Error";
8438 break;
8439
8440 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8441 desc = "LAN: Receive Aborted";
8442 break;
8443
8444 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8445 desc = "LAN: Partial Packet";
8446 break;
8447
8448 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8449 desc = "LAN: Canceled";
8450 break;
8451
8452/****************************************************************************/
8453/* Serial Attached SCSI values */
8454/****************************************************************************/
8455
8456 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8457 desc = "SAS: SMP Request Failed";
8458 break;
8459
8460 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8461 desc = "SAS: SMP Data Overrun";
8462 break;
8463
8464 default:
8465 desc = "Others";
8466 break;
8467 }
8468
8469 if (!desc)
8470 return;
8471
8472 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8473 ioc->name, status, desc));
8474}
8475
8476/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8477EXPORT_SYMBOL(mpt_attach);
8478EXPORT_SYMBOL(mpt_detach);
8479#ifdef CONFIG_PM
8480EXPORT_SYMBOL(mpt_resume);
8481EXPORT_SYMBOL(mpt_suspend);
8482#endif
8483EXPORT_SYMBOL(ioc_list);
8484EXPORT_SYMBOL(mpt_register);
8485EXPORT_SYMBOL(mpt_deregister);
8486EXPORT_SYMBOL(mpt_event_register);
8487EXPORT_SYMBOL(mpt_event_deregister);
8488EXPORT_SYMBOL(mpt_reset_register);
8489EXPORT_SYMBOL(mpt_reset_deregister);
8490EXPORT_SYMBOL(mpt_device_driver_register);
8491EXPORT_SYMBOL(mpt_device_driver_deregister);
8492EXPORT_SYMBOL(mpt_get_msg_frame);
8493EXPORT_SYMBOL(mpt_put_msg_frame);
8494EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8495EXPORT_SYMBOL(mpt_free_msg_frame);
8496EXPORT_SYMBOL(mpt_send_handshake_request);
8497EXPORT_SYMBOL(mpt_verify_adapter);
8498EXPORT_SYMBOL(mpt_GetIocState);
8499EXPORT_SYMBOL(mpt_print_ioc_summary);
8500EXPORT_SYMBOL(mpt_HardResetHandler);
8501EXPORT_SYMBOL(mpt_config);
8502EXPORT_SYMBOL(mpt_findImVolumes);
8503EXPORT_SYMBOL(mpt_alloc_fw_memory);
8504EXPORT_SYMBOL(mpt_free_fw_memory);
8505EXPORT_SYMBOL(mptbase_sas_persist_operation);
8506EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8507
8508/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8509/**
8510 * fusion_init - Fusion MPT base driver initialization routine.
8511 *
8512 * Returns 0 for success, non-zero for failure.
8513 */
8514static int __init
8515fusion_init(void)
8516{
8517 u8 cb_idx;
8518
8519 show_mptmod_ver(my_NAME, my_VERSION);
8520 printk(KERN_INFO COPYRIGHT "\n");
8521
8522 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8523 MptCallbacks[cb_idx] = NULL;
8524 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8525 MptEvHandlers[cb_idx] = NULL;
8526 MptResetHandlers[cb_idx] = NULL;
8527 }
8528
8529 /* Register ourselves (mptbase) in order to facilitate
8530 * EventNotification handling.
8531 */
8532 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8533 "mptbase_reply");
8534
8535 /* Register for hard reset handling callbacks.
8536 */
8537 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8538
8539#ifdef CONFIG_PROC_FS
8540 (void) procmpt_create();
8541#endif
8542 return 0;
8543}
8544
8545/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8546/**
8547 * fusion_exit - Perform driver unload cleanup.
8548 *
8549 * This routine frees all resources associated with each MPT adapter
8550 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8551 */
8552static void __exit
8553fusion_exit(void)
8554{
8555
8556 mpt_reset_deregister(mpt_base_index);
8557
8558#ifdef CONFIG_PROC_FS
8559 procmpt_destroy();
8560#endif
8561}
8562
8563module_init(fusion_init);
8564module_exit(fusion_exit);
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static int mpt_summary_proc_show(struct seq_file *m, void *v);
201static int mpt_version_proc_show(struct seq_file *m, void *v);
202static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501}
502
503static void
504mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505{
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571}
572
573/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574/**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590static irqreturn_t
591mpt_interrupt(int irq, void *bus_id)
592{
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611}
612
613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614/**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627static int
628mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629{
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 fallthrough;
646 case MPI_FUNCTION_CONFIG:
647 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
649 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
650 memcpy(ioc->mptbase_cmds.reply, reply,
651 min(MPT_DEFAULT_FRAME_SIZE,
652 4 * reply->u.reply.MsgLength));
653 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
654 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
655 complete(&ioc->mptbase_cmds.done);
656 } else
657 freereq = 0;
658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
659 freereq = 1;
660 break;
661 case MPI_FUNCTION_EVENT_ACK:
662 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
663 "EventAck reply received\n", ioc->name));
664 break;
665 default:
666 printk(MYIOC_s_ERR_FMT
667 "Unexpected msg function (=%02Xh) reply received!\n",
668 ioc->name, reply->u.hdr.Function);
669 break;
670 }
671
672 /*
673 * Conditionally tell caller to free the original
674 * EventNotification/EventAck/unexpected request frame!
675 */
676 return freereq;
677}
678
679/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
680/**
681 * mpt_register - Register protocol-specific main callback handler.
682 * @cbfunc: callback function pointer
683 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
684 * @func_name: call function's name
685 *
686 * This routine is called by a protocol-specific driver (SCSI host,
687 * LAN, SCSI target) to register its reply callback routine. Each
688 * protocol-specific driver must do this before it will be able to
689 * use any IOC resources, such as obtaining request frames.
690 *
691 * NOTES: The SCSI protocol driver currently calls this routine thrice
692 * in order to register separate callbacks; one for "normal" SCSI IO;
693 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
694 *
695 * Returns u8 valued "handle" in the range (and S.O.D. order)
696 * {N,...,7,6,5,...,1} if successful.
697 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
698 * considered an error by the caller.
699 */
700u8
701mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
702{
703 u8 cb_idx;
704 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
705
706 /*
707 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
708 * (slot/handle 0 is reserved!)
709 */
710 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
711 if (MptCallbacks[cb_idx] == NULL) {
712 MptCallbacks[cb_idx] = cbfunc;
713 MptDriverClass[cb_idx] = dclass;
714 MptEvHandlers[cb_idx] = NULL;
715 last_drv_idx = cb_idx;
716 strlcpy(MptCallbacksName[cb_idx], func_name,
717 MPT_MAX_CALLBACKNAME_LEN+1);
718 break;
719 }
720 }
721
722 return last_drv_idx;
723}
724
725/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
726/**
727 * mpt_deregister - Deregister a protocol drivers resources.
728 * @cb_idx: previously registered callback handle
729 *
730 * Each protocol-specific driver should call this routine when its
731 * module is unloaded.
732 */
733void
734mpt_deregister(u8 cb_idx)
735{
736 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
737 MptCallbacks[cb_idx] = NULL;
738 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
739 MptEvHandlers[cb_idx] = NULL;
740
741 last_drv_idx++;
742 }
743}
744
745/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
746/**
747 * mpt_event_register - Register protocol-specific event callback handler.
748 * @cb_idx: previously registered (via mpt_register) callback handle
749 * @ev_cbfunc: callback function
750 *
751 * This routine can be called by one or more protocol-specific drivers
752 * if/when they choose to be notified of MPT events.
753 *
754 * Returns 0 for success.
755 */
756int
757mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
758{
759 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
760 return -1;
761
762 MptEvHandlers[cb_idx] = ev_cbfunc;
763 return 0;
764}
765
766/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
767/**
768 * mpt_event_deregister - Deregister protocol-specific event callback handler
769 * @cb_idx: previously registered callback handle
770 *
771 * Each protocol-specific driver should call this routine
772 * when it does not (or can no longer) handle events,
773 * or when its module is unloaded.
774 */
775void
776mpt_event_deregister(u8 cb_idx)
777{
778 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
779 return;
780
781 MptEvHandlers[cb_idx] = NULL;
782}
783
784/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
785/**
786 * mpt_reset_register - Register protocol-specific IOC reset handler.
787 * @cb_idx: previously registered (via mpt_register) callback handle
788 * @reset_func: reset function
789 *
790 * This routine can be called by one or more protocol-specific drivers
791 * if/when they choose to be notified of IOC resets.
792 *
793 * Returns 0 for success.
794 */
795int
796mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
797{
798 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
799 return -1;
800
801 MptResetHandlers[cb_idx] = reset_func;
802 return 0;
803}
804
805/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
806/**
807 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
808 * @cb_idx: previously registered callback handle
809 *
810 * Each protocol-specific driver should call this routine
811 * when it does not (or can no longer) handle IOC reset handling,
812 * or when its module is unloaded.
813 */
814void
815mpt_reset_deregister(u8 cb_idx)
816{
817 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
818 return;
819
820 MptResetHandlers[cb_idx] = NULL;
821}
822
823/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
824/**
825 * mpt_device_driver_register - Register device driver hooks
826 * @dd_cbfunc: driver callbacks struct
827 * @cb_idx: MPT protocol driver index
828 */
829int
830mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
831{
832 MPT_ADAPTER *ioc;
833 const struct pci_device_id *id;
834
835 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
836 return -EINVAL;
837
838 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
839
840 /* call per pci device probe entry point */
841 list_for_each_entry(ioc, &ioc_list, list) {
842 id = ioc->pcidev->driver ?
843 ioc->pcidev->driver->id_table : NULL;
844 if (dd_cbfunc->probe)
845 dd_cbfunc->probe(ioc->pcidev, id);
846 }
847
848 return 0;
849}
850
851/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
852/**
853 * mpt_device_driver_deregister - DeRegister device driver hooks
854 * @cb_idx: MPT protocol driver index
855 */
856void
857mpt_device_driver_deregister(u8 cb_idx)
858{
859 struct mpt_pci_driver *dd_cbfunc;
860 MPT_ADAPTER *ioc;
861
862 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
863 return;
864
865 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
866
867 list_for_each_entry(ioc, &ioc_list, list) {
868 if (dd_cbfunc->remove)
869 dd_cbfunc->remove(ioc->pcidev);
870 }
871
872 MptDeviceDriverHandlers[cb_idx] = NULL;
873}
874
875
876/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
877/**
878 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
879 * @cb_idx: Handle of registered MPT protocol driver
880 * @ioc: Pointer to MPT adapter structure
881 *
882 * Obtain an MPT request frame from the pool (of 1024) that are
883 * allocated per MPT adapter.
884 *
885 * Returns pointer to a MPT request frame or %NULL if none are available
886 * or IOC is not active.
887 */
888MPT_FRAME_HDR*
889mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
890{
891 MPT_FRAME_HDR *mf;
892 unsigned long flags;
893 u16 req_idx; /* Request index */
894
895 /* validate handle and ioc identifier */
896
897#ifdef MFCNT
898 if (!ioc->active)
899 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
900 "returning NULL!\n", ioc->name);
901#endif
902
903 /* If interrupts are not attached, do not return a request frame */
904 if (!ioc->active)
905 return NULL;
906
907 spin_lock_irqsave(&ioc->FreeQlock, flags);
908 if (!list_empty(&ioc->FreeQ)) {
909 int req_offset;
910
911 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
912 u.frame.linkage.list);
913 list_del(&mf->u.frame.linkage.list);
914 mf->u.frame.linkage.arg1 = 0;
915 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
916 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
917 /* u16! */
918 req_idx = req_offset / ioc->req_sz;
919 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
920 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
921 /* Default, will be changed if necessary in SG generation */
922 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
923#ifdef MFCNT
924 ioc->mfcnt++;
925#endif
926 }
927 else
928 mf = NULL;
929 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
930
931#ifdef MFCNT
932 if (mf == NULL)
933 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
934 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
935 ioc->req_depth);
936 mfcounter++;
937 if (mfcounter == PRINT_MF_COUNT)
938 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
939 ioc->mfcnt, ioc->req_depth);
940#endif
941
942 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
943 ioc->name, cb_idx, ioc->id, mf));
944 return mf;
945}
946
947/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
948/**
949 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
950 * @cb_idx: Handle of registered MPT protocol driver
951 * @ioc: Pointer to MPT adapter structure
952 * @mf: Pointer to MPT request frame
953 *
954 * This routine posts an MPT request frame to the request post FIFO of a
955 * specific MPT adapter.
956 */
957void
958mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
959{
960 u32 mf_dma_addr;
961 int req_offset;
962 u16 req_idx; /* Request index */
963
964 /* ensure values are reset properly! */
965 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
966 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
967 /* u16! */
968 req_idx = req_offset / ioc->req_sz;
969 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
970 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
971
972 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
973
974 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
975 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
976 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
977 ioc->RequestNB[req_idx]));
978 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
979}
980
981/**
982 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
983 * @cb_idx: Handle of registered MPT protocol driver
984 * @ioc: Pointer to MPT adapter structure
985 * @mf: Pointer to MPT request frame
986 *
987 * Send a protocol-specific MPT request frame to an IOC using
988 * hi-priority request queue.
989 *
990 * This routine posts an MPT request frame to the request post FIFO of a
991 * specific MPT adapter.
992 **/
993void
994mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
995{
996 u32 mf_dma_addr;
997 int req_offset;
998 u16 req_idx; /* Request index */
999
1000 /* ensure values are reset properly! */
1001 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1002 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1003 req_idx = req_offset / ioc->req_sz;
1004 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1005 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1006
1007 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1008
1009 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1010 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1011 ioc->name, mf_dma_addr, req_idx));
1012 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1013}
1014
1015/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1016/**
1017 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1018 * @ioc: Pointer to MPT adapter structure
1019 * @mf: Pointer to MPT request frame
1020 *
1021 * This routine places a MPT request frame back on the MPT adapter's
1022 * FreeQ.
1023 */
1024void
1025mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1026{
1027 unsigned long flags;
1028
1029 /* Put Request back on FreeQ! */
1030 spin_lock_irqsave(&ioc->FreeQlock, flags);
1031 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1032 goto out;
1033 /* signature to know if this mf is freed */
1034 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1035 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1036#ifdef MFCNT
1037 ioc->mfcnt--;
1038#endif
1039 out:
1040 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1041}
1042
1043/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1044/**
1045 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1046 * @pAddr: virtual address for SGE
1047 * @flagslength: SGE flags and data transfer length
1048 * @dma_addr: Physical address
1049 *
1050 * This routine places a MPT request frame back on the MPT adapter's
1051 * FreeQ.
1052 */
1053static void
1054mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1055{
1056 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1057 pSge->FlagsLength = cpu_to_le32(flagslength);
1058 pSge->Address = cpu_to_le32(dma_addr);
1059}
1060
1061/**
1062 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1063 * @pAddr: virtual address for SGE
1064 * @flagslength: SGE flags and data transfer length
1065 * @dma_addr: Physical address
1066 *
1067 * This routine places a MPT request frame back on the MPT adapter's
1068 * FreeQ.
1069 **/
1070static void
1071mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1072{
1073 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1074 pSge->Address.Low = cpu_to_le32
1075 (lower_32_bits(dma_addr));
1076 pSge->Address.High = cpu_to_le32
1077 (upper_32_bits(dma_addr));
1078 pSge->FlagsLength = cpu_to_le32
1079 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1080}
1081
1082/**
1083 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1084 * @pAddr: virtual address for SGE
1085 * @flagslength: SGE flags and data transfer length
1086 * @dma_addr: Physical address
1087 *
1088 * This routine places a MPT request frame back on the MPT adapter's
1089 * FreeQ.
1090 **/
1091static void
1092mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1093{
1094 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1095 u32 tmp;
1096
1097 pSge->Address.Low = cpu_to_le32
1098 (lower_32_bits(dma_addr));
1099 tmp = (u32)(upper_32_bits(dma_addr));
1100
1101 /*
1102 * 1078 errata workaround for the 36GB limitation
1103 */
1104 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1105 flagslength |=
1106 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1107 tmp |= (1<<31);
1108 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1109 printk(KERN_DEBUG "1078 P0M2 addressing for "
1110 "addr = 0x%llx len = %d\n",
1111 (unsigned long long)dma_addr,
1112 MPI_SGE_LENGTH(flagslength));
1113 }
1114
1115 pSge->Address.High = cpu_to_le32(tmp);
1116 pSge->FlagsLength = cpu_to_le32(
1117 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1118}
1119
1120/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1121/**
1122 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1123 * @pAddr: virtual address for SGE
1124 * @next: nextChainOffset value (u32's)
1125 * @length: length of next SGL segment
1126 * @dma_addr: Physical address
1127 *
1128 */
1129static void
1130mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1131{
1132 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1133
1134 pChain->Length = cpu_to_le16(length);
1135 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1136 pChain->NextChainOffset = next;
1137 pChain->Address = cpu_to_le32(dma_addr);
1138}
1139
1140/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1141/**
1142 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1143 * @pAddr: virtual address for SGE
1144 * @next: nextChainOffset value (u32's)
1145 * @length: length of next SGL segment
1146 * @dma_addr: Physical address
1147 *
1148 */
1149static void
1150mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1151{
1152 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1153 u32 tmp = dma_addr & 0xFFFFFFFF;
1154
1155 pChain->Length = cpu_to_le16(length);
1156 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1157 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1158
1159 pChain->NextChainOffset = next;
1160
1161 pChain->Address.Low = cpu_to_le32(tmp);
1162 tmp = (u32)(upper_32_bits(dma_addr));
1163 pChain->Address.High = cpu_to_le32(tmp);
1164}
1165
1166/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1167/**
1168 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1169 * @cb_idx: Handle of registered MPT protocol driver
1170 * @ioc: Pointer to MPT adapter structure
1171 * @reqBytes: Size of the request in bytes
1172 * @req: Pointer to MPT request frame
1173 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1174 *
1175 * This routine is used exclusively to send MptScsiTaskMgmt
1176 * requests since they are required to be sent via doorbell handshake.
1177 *
1178 * NOTE: It is the callers responsibility to byte-swap fields in the
1179 * request which are greater than 1 byte in size.
1180 *
1181 * Returns 0 for success, non-zero for failure.
1182 */
1183int
1184mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1185{
1186 int r = 0;
1187 u8 *req_as_bytes;
1188 int ii;
1189
1190 /* State is known to be good upon entering
1191 * this function so issue the bus reset
1192 * request.
1193 */
1194
1195 /*
1196 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1197 * setting cb_idx/req_idx. But ONLY if this request
1198 * is in proper (pre-alloc'd) request buffer range...
1199 */
1200 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1201 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1202 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1203 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1204 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1205 }
1206
1207 /* Make sure there are no doorbells */
1208 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1209
1210 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1211 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1212 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1213
1214 /* Wait for IOC doorbell int */
1215 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1216 return ii;
1217 }
1218
1219 /* Read doorbell and check for active bit */
1220 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1221 return -5;
1222
1223 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1224 ioc->name, ii));
1225
1226 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1227
1228 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1229 return -2;
1230 }
1231
1232 /* Send request via doorbell handshake */
1233 req_as_bytes = (u8 *) req;
1234 for (ii = 0; ii < reqBytes/4; ii++) {
1235 u32 word;
1236
1237 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1238 (req_as_bytes[(ii*4) + 1] << 8) |
1239 (req_as_bytes[(ii*4) + 2] << 16) |
1240 (req_as_bytes[(ii*4) + 3] << 24));
1241 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1242 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1243 r = -3;
1244 break;
1245 }
1246 }
1247
1248 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1249 r = 0;
1250 else
1251 r = -4;
1252
1253 /* Make sure there are no doorbells */
1254 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1255
1256 return r;
1257}
1258
1259/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1260/**
1261 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1262 * @ioc: Pointer to MPT adapter structure
1263 * @access_control_value: define bits below
1264 * @sleepFlag: Specifies whether the process can sleep
1265 *
1266 * Provides mechanism for the host driver to control the IOC's
1267 * Host Page Buffer access.
1268 *
1269 * Access Control Value - bits[15:12]
1270 * 0h Reserved
1271 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1272 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1273 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1274 *
1275 * Returns 0 for success, non-zero for failure.
1276 */
1277
1278static int
1279mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1280{
1281 int r = 0;
1282
1283 /* return if in use */
1284 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1285 & MPI_DOORBELL_ACTIVE)
1286 return -1;
1287
1288 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1289
1290 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1291 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1292 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1293 (access_control_value<<12)));
1294
1295 /* Wait for IOC to clear Doorbell Status bit */
1296 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1297 return -2;
1298 }else
1299 return 0;
1300}
1301
1302/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1303/**
1304 * mpt_host_page_alloc - allocate system memory for the fw
1305 * @ioc: Pointer to pointer to IOC adapter
1306 * @ioc_init: Pointer to ioc init config page
1307 *
1308 * If we already allocated memory in past, then resend the same pointer.
1309 * Returns 0 for success, non-zero for failure.
1310 */
1311static int
1312mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1313{
1314 char *psge;
1315 int flags_length;
1316 u32 host_page_buffer_sz=0;
1317
1318 if(!ioc->HostPageBuffer) {
1319
1320 host_page_buffer_sz =
1321 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1322
1323 if(!host_page_buffer_sz)
1324 return 0; /* fw doesn't need any host buffers */
1325
1326 /* spin till we get enough memory */
1327 while (host_page_buffer_sz > 0) {
1328 ioc->HostPageBuffer =
1329 dma_alloc_coherent(&ioc->pcidev->dev,
1330 host_page_buffer_sz,
1331 &ioc->HostPageBuffer_dma,
1332 GFP_KERNEL);
1333 if (ioc->HostPageBuffer) {
1334 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1335 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1336 ioc->name, ioc->HostPageBuffer,
1337 (u32)ioc->HostPageBuffer_dma,
1338 host_page_buffer_sz));
1339 ioc->alloc_total += host_page_buffer_sz;
1340 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1341 break;
1342 }
1343
1344 host_page_buffer_sz -= (4*1024);
1345 }
1346 }
1347
1348 if(!ioc->HostPageBuffer) {
1349 printk(MYIOC_s_ERR_FMT
1350 "Failed to alloc memory for host_page_buffer!\n",
1351 ioc->name);
1352 return -999;
1353 }
1354
1355 psge = (char *)&ioc_init->HostPageBufferSGE;
1356 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1357 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1358 MPI_SGE_FLAGS_HOST_TO_IOC |
1359 MPI_SGE_FLAGS_END_OF_BUFFER;
1360 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1361 flags_length |= ioc->HostPageBuffer_sz;
1362 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1363 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1364
1365 return 0;
1366}
1367
1368/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1369/**
1370 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1371 * @iocid: IOC unique identifier (integer)
1372 * @iocpp: Pointer to pointer to IOC adapter
1373 *
1374 * Given a unique IOC identifier, set pointer to the associated MPT
1375 * adapter structure.
1376 *
1377 * Returns iocid and sets iocpp if iocid is found.
1378 * Returns -1 if iocid is not found.
1379 */
1380int
1381mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1382{
1383 MPT_ADAPTER *ioc;
1384
1385 list_for_each_entry(ioc,&ioc_list,list) {
1386 if (ioc->id == iocid) {
1387 *iocpp =ioc;
1388 return iocid;
1389 }
1390 }
1391
1392 *iocpp = NULL;
1393 return -1;
1394}
1395
1396/**
1397 * mpt_get_product_name - returns product string
1398 * @vendor: pci vendor id
1399 * @device: pci device id
1400 * @revision: pci revision id
1401 *
1402 * Returns product string displayed when driver loads,
1403 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1404 *
1405 **/
1406static const char*
1407mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1408{
1409 char *product_str = NULL;
1410
1411 if (vendor == PCI_VENDOR_ID_BROCADE) {
1412 switch (device)
1413 {
1414 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1415 switch (revision)
1416 {
1417 case 0x00:
1418 product_str = "BRE040 A0";
1419 break;
1420 case 0x01:
1421 product_str = "BRE040 A1";
1422 break;
1423 default:
1424 product_str = "BRE040";
1425 break;
1426 }
1427 break;
1428 }
1429 goto out;
1430 }
1431
1432 switch (device)
1433 {
1434 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1435 product_str = "LSIFC909 B1";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1438 product_str = "LSIFC919 B0";
1439 break;
1440 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1441 product_str = "LSIFC929 B0";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC919X A0";
1446 else
1447 product_str = "LSIFC919XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1450 if (revision < 0x80)
1451 product_str = "LSIFC929X A0";
1452 else
1453 product_str = "LSIFC929XL A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1456 product_str = "LSIFC939X A1";
1457 break;
1458 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1459 product_str = "LSIFC949X A1";
1460 break;
1461 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1462 switch (revision)
1463 {
1464 case 0x00:
1465 product_str = "LSIFC949E A0";
1466 break;
1467 case 0x01:
1468 product_str = "LSIFC949E A1";
1469 break;
1470 default:
1471 product_str = "LSIFC949E";
1472 break;
1473 }
1474 break;
1475 case MPI_MANUFACTPAGE_DEVID_53C1030:
1476 switch (revision)
1477 {
1478 case 0x00:
1479 product_str = "LSI53C1030 A0";
1480 break;
1481 case 0x01:
1482 product_str = "LSI53C1030 B0";
1483 break;
1484 case 0x03:
1485 product_str = "LSI53C1030 B1";
1486 break;
1487 case 0x07:
1488 product_str = "LSI53C1030 B2";
1489 break;
1490 case 0x08:
1491 product_str = "LSI53C1030 C0";
1492 break;
1493 case 0x80:
1494 product_str = "LSI53C1030T A0";
1495 break;
1496 case 0x83:
1497 product_str = "LSI53C1030T A2";
1498 break;
1499 case 0x87:
1500 product_str = "LSI53C1030T A3";
1501 break;
1502 case 0xc1:
1503 product_str = "LSI53C1020A A1";
1504 break;
1505 default:
1506 product_str = "LSI53C1030";
1507 break;
1508 }
1509 break;
1510 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1511 switch (revision)
1512 {
1513 case 0x03:
1514 product_str = "LSI53C1035 A2";
1515 break;
1516 case 0x04:
1517 product_str = "LSI53C1035 B0";
1518 break;
1519 default:
1520 product_str = "LSI53C1035";
1521 break;
1522 }
1523 break;
1524 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1525 switch (revision)
1526 {
1527 case 0x00:
1528 product_str = "LSISAS1064 A1";
1529 break;
1530 case 0x01:
1531 product_str = "LSISAS1064 A2";
1532 break;
1533 case 0x02:
1534 product_str = "LSISAS1064 A3";
1535 break;
1536 case 0x03:
1537 product_str = "LSISAS1064 A4";
1538 break;
1539 default:
1540 product_str = "LSISAS1064";
1541 break;
1542 }
1543 break;
1544 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1545 switch (revision)
1546 {
1547 case 0x00:
1548 product_str = "LSISAS1064E A0";
1549 break;
1550 case 0x01:
1551 product_str = "LSISAS1064E B0";
1552 break;
1553 case 0x02:
1554 product_str = "LSISAS1064E B1";
1555 break;
1556 case 0x04:
1557 product_str = "LSISAS1064E B2";
1558 break;
1559 case 0x08:
1560 product_str = "LSISAS1064E B3";
1561 break;
1562 default:
1563 product_str = "LSISAS1064E";
1564 break;
1565 }
1566 break;
1567 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1568 switch (revision)
1569 {
1570 case 0x00:
1571 product_str = "LSISAS1068 A0";
1572 break;
1573 case 0x01:
1574 product_str = "LSISAS1068 B0";
1575 break;
1576 case 0x02:
1577 product_str = "LSISAS1068 B1";
1578 break;
1579 default:
1580 product_str = "LSISAS1068";
1581 break;
1582 }
1583 break;
1584 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1585 switch (revision)
1586 {
1587 case 0x00:
1588 product_str = "LSISAS1068E A0";
1589 break;
1590 case 0x01:
1591 product_str = "LSISAS1068E B0";
1592 break;
1593 case 0x02:
1594 product_str = "LSISAS1068E B1";
1595 break;
1596 case 0x04:
1597 product_str = "LSISAS1068E B2";
1598 break;
1599 case 0x08:
1600 product_str = "LSISAS1068E B3";
1601 break;
1602 default:
1603 product_str = "LSISAS1068E";
1604 break;
1605 }
1606 break;
1607 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1608 switch (revision)
1609 {
1610 case 0x00:
1611 product_str = "LSISAS1078 A0";
1612 break;
1613 case 0x01:
1614 product_str = "LSISAS1078 B0";
1615 break;
1616 case 0x02:
1617 product_str = "LSISAS1078 C0";
1618 break;
1619 case 0x03:
1620 product_str = "LSISAS1078 C1";
1621 break;
1622 case 0x04:
1623 product_str = "LSISAS1078 C2";
1624 break;
1625 default:
1626 product_str = "LSISAS1078";
1627 break;
1628 }
1629 break;
1630 }
1631
1632 out:
1633 return product_str;
1634}
1635
1636/**
1637 * mpt_mapresources - map in memory mapped io
1638 * @ioc: Pointer to pointer to IOC adapter
1639 *
1640 **/
1641static int
1642mpt_mapresources(MPT_ADAPTER *ioc)
1643{
1644 u8 __iomem *mem;
1645 int ii;
1646 resource_size_t mem_phys;
1647 unsigned long port;
1648 u32 msize;
1649 u32 psize;
1650 int r = -ENODEV;
1651 struct pci_dev *pdev;
1652
1653 pdev = ioc->pcidev;
1654 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1655 if (pci_enable_device_mem(pdev)) {
1656 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1657 "failed\n", ioc->name);
1658 return r;
1659 }
1660 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1661 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1662 "MEM failed\n", ioc->name);
1663 goto out_pci_disable_device;
1664 }
1665
1666 if (sizeof(dma_addr_t) > 4) {
1667 const uint64_t required_mask = dma_get_required_mask
1668 (&pdev->dev);
1669 if (required_mask > DMA_BIT_MASK(32)
1670 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1671 && !pci_set_consistent_dma_mask(pdev,
1672 DMA_BIT_MASK(64))) {
1673 ioc->dma_mask = DMA_BIT_MASK(64);
1674 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1675 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1676 ioc->name));
1677 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1678 && !pci_set_consistent_dma_mask(pdev,
1679 DMA_BIT_MASK(32))) {
1680 ioc->dma_mask = DMA_BIT_MASK(32);
1681 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1682 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1683 ioc->name));
1684 } else {
1685 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1686 ioc->name, pci_name(pdev));
1687 goto out_pci_release_region;
1688 }
1689 } else {
1690 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1691 && !pci_set_consistent_dma_mask(pdev,
1692 DMA_BIT_MASK(32))) {
1693 ioc->dma_mask = DMA_BIT_MASK(32);
1694 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1695 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1696 ioc->name));
1697 } else {
1698 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1699 ioc->name, pci_name(pdev));
1700 goto out_pci_release_region;
1701 }
1702 }
1703
1704 mem_phys = msize = 0;
1705 port = psize = 0;
1706 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1707 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1708 if (psize)
1709 continue;
1710 /* Get I/O space! */
1711 port = pci_resource_start(pdev, ii);
1712 psize = pci_resource_len(pdev, ii);
1713 } else {
1714 if (msize)
1715 continue;
1716 /* Get memmap */
1717 mem_phys = pci_resource_start(pdev, ii);
1718 msize = pci_resource_len(pdev, ii);
1719 }
1720 }
1721 ioc->mem_size = msize;
1722
1723 mem = NULL;
1724 /* Get logical ptr for PciMem0 space */
1725 /*mem = ioremap(mem_phys, msize);*/
1726 mem = ioremap(mem_phys, msize);
1727 if (mem == NULL) {
1728 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1729 " memory!\n", ioc->name);
1730 r = -EINVAL;
1731 goto out_pci_release_region;
1732 }
1733 ioc->memmap = mem;
1734 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1735 ioc->name, mem, (unsigned long long)mem_phys));
1736
1737 ioc->mem_phys = mem_phys;
1738 ioc->chip = (SYSIF_REGS __iomem *)mem;
1739
1740 /* Save Port IO values in case we need to do downloadboot */
1741 ioc->pio_mem_phys = port;
1742 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1743
1744 return 0;
1745
1746out_pci_release_region:
1747 pci_release_selected_regions(pdev, ioc->bars);
1748out_pci_disable_device:
1749 pci_disable_device(pdev);
1750 return r;
1751}
1752
1753/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1754/**
1755 * mpt_attach - Install a PCI intelligent MPT adapter.
1756 * @pdev: Pointer to pci_dev structure
1757 * @id: PCI device ID information
1758 *
1759 * This routine performs all the steps necessary to bring the IOC of
1760 * a MPT adapter to a OPERATIONAL state. This includes registering
1761 * memory regions, registering the interrupt, and allocating request
1762 * and reply memory pools.
1763 *
1764 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1765 * MPT adapter.
1766 *
1767 * Returns 0 for success, non-zero for failure.
1768 *
1769 * TODO: Add support for polled controllers
1770 */
1771int
1772mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1773{
1774 MPT_ADAPTER *ioc;
1775 u8 cb_idx;
1776 int r = -ENODEV;
1777 u8 pcixcmd;
1778 static int mpt_ids = 0;
1779#ifdef CONFIG_PROC_FS
1780 struct proc_dir_entry *dent;
1781#endif
1782
1783 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1784 if (ioc == NULL) {
1785 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1786 return -ENOMEM;
1787 }
1788
1789 ioc->id = mpt_ids++;
1790 sprintf(ioc->name, "ioc%d", ioc->id);
1791 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1792
1793 /*
1794 * set initial debug level
1795 * (refer to mptdebug.h)
1796 *
1797 */
1798 ioc->debug_level = mpt_debug_level;
1799 if (mpt_debug_level)
1800 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1801
1802 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1803
1804 ioc->pcidev = pdev;
1805 if (mpt_mapresources(ioc)) {
1806 goto out_free_ioc;
1807 }
1808
1809 /*
1810 * Setting up proper handlers for scatter gather handling
1811 */
1812 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1813 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1814 ioc->add_sge = &mpt_add_sge_64bit_1078;
1815 else
1816 ioc->add_sge = &mpt_add_sge_64bit;
1817 ioc->add_chain = &mpt_add_chain_64bit;
1818 ioc->sg_addr_size = 8;
1819 } else {
1820 ioc->add_sge = &mpt_add_sge;
1821 ioc->add_chain = &mpt_add_chain;
1822 ioc->sg_addr_size = 4;
1823 }
1824 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1825
1826 ioc->alloc_total = sizeof(MPT_ADAPTER);
1827 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1828 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1829
1830
1831 spin_lock_init(&ioc->taskmgmt_lock);
1832 mutex_init(&ioc->internal_cmds.mutex);
1833 init_completion(&ioc->internal_cmds.done);
1834 mutex_init(&ioc->mptbase_cmds.mutex);
1835 init_completion(&ioc->mptbase_cmds.done);
1836 mutex_init(&ioc->taskmgmt_cmds.mutex);
1837 init_completion(&ioc->taskmgmt_cmds.done);
1838
1839 /* Initialize the event logging.
1840 */
1841 ioc->eventTypes = 0; /* None */
1842 ioc->eventContext = 0;
1843 ioc->eventLogSize = 0;
1844 ioc->events = NULL;
1845
1846#ifdef MFCNT
1847 ioc->mfcnt = 0;
1848#endif
1849
1850 ioc->sh = NULL;
1851 ioc->cached_fw = NULL;
1852
1853 /* Initialize SCSI Config Data structure
1854 */
1855 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1856
1857 /* Initialize the fc rport list head.
1858 */
1859 INIT_LIST_HEAD(&ioc->fc_rports);
1860
1861 /* Find lookup slot. */
1862 INIT_LIST_HEAD(&ioc->list);
1863
1864
1865 /* Initialize workqueue */
1866 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1867
1868 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1869 "mpt_poll_%d", ioc->id);
1870 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1871 WQ_MEM_RECLAIM, 0);
1872 if (!ioc->reset_work_q) {
1873 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1874 ioc->name);
1875 r = -ENOMEM;
1876 goto out_unmap_resources;
1877 }
1878
1879 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1880 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1881
1882 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1883 pdev->revision);
1884
1885 switch (pdev->device)
1886 {
1887 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1888 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1889 ioc->errata_flag_1064 = 1;
1890 fallthrough;
1891 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1892 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1893 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1894 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1895 ioc->bus_type = FC;
1896 break;
1897
1898 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1899 if (pdev->revision < XL_929) {
1900 /* 929X Chip Fix. Set Split transactions level
1901 * for PCIX. Set MOST bits to zero.
1902 */
1903 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1904 pcixcmd &= 0x8F;
1905 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1906 } else {
1907 /* 929XL Chip Fix. Set MMRBC to 0x08.
1908 */
1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1910 pcixcmd |= 0x08;
1911 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1912 }
1913 ioc->bus_type = FC;
1914 break;
1915
1916 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1917 /* 919X Chip Fix. Set Split transactions level
1918 * for PCIX. Set MOST bits to zero.
1919 */
1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1921 pcixcmd &= 0x8F;
1922 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1923 ioc->bus_type = FC;
1924 break;
1925
1926 case MPI_MANUFACTPAGE_DEVID_53C1030:
1927 /* 1030 Chip Fix. Disable Split transactions
1928 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1929 */
1930 if (pdev->revision < C0_1030) {
1931 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1932 pcixcmd &= 0x8F;
1933 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1934 }
1935 fallthrough;
1936
1937 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1938 ioc->bus_type = SPI;
1939 break;
1940
1941 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1942 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1943 ioc->errata_flag_1064 = 1;
1944 ioc->bus_type = SAS;
1945 break;
1946
1947 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1949 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1950 ioc->bus_type = SAS;
1951 break;
1952 }
1953
1954
1955 switch (ioc->bus_type) {
1956
1957 case SAS:
1958 ioc->msi_enable = mpt_msi_enable_sas;
1959 break;
1960
1961 case SPI:
1962 ioc->msi_enable = mpt_msi_enable_spi;
1963 break;
1964
1965 case FC:
1966 ioc->msi_enable = mpt_msi_enable_fc;
1967 break;
1968
1969 default:
1970 ioc->msi_enable = 0;
1971 break;
1972 }
1973
1974 ioc->fw_events_off = 1;
1975
1976 if (ioc->errata_flag_1064)
1977 pci_disable_io_access(pdev);
1978
1979 spin_lock_init(&ioc->FreeQlock);
1980
1981 /* Disable all! */
1982 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1983 ioc->active = 0;
1984 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1985
1986 /* Set IOC ptr in the pcidev's driver data. */
1987 pci_set_drvdata(ioc->pcidev, ioc);
1988
1989 /* Set lookup ptr. */
1990 list_add_tail(&ioc->list, &ioc_list);
1991
1992 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1993 */
1994 mpt_detect_bound_ports(ioc, pdev);
1995
1996 INIT_LIST_HEAD(&ioc->fw_event_list);
1997 spin_lock_init(&ioc->fw_event_lock);
1998 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1999 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
2000 WQ_MEM_RECLAIM, 0);
2001 if (!ioc->fw_event_q) {
2002 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
2003 ioc->name);
2004 r = -ENOMEM;
2005 goto out_remove_ioc;
2006 }
2007
2008 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2009 CAN_SLEEP)) != 0){
2010 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2011 ioc->name, r);
2012
2013 destroy_workqueue(ioc->fw_event_q);
2014 ioc->fw_event_q = NULL;
2015
2016 list_del(&ioc->list);
2017 if (ioc->alt_ioc)
2018 ioc->alt_ioc->alt_ioc = NULL;
2019 iounmap(ioc->memmap);
2020 if (pci_is_enabled(pdev))
2021 pci_disable_device(pdev);
2022 if (r != -5)
2023 pci_release_selected_regions(pdev, ioc->bars);
2024
2025 destroy_workqueue(ioc->reset_work_q);
2026 ioc->reset_work_q = NULL;
2027
2028 kfree(ioc);
2029 return r;
2030 }
2031
2032 /* call per device driver probe entry point */
2033 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2034 if(MptDeviceDriverHandlers[cb_idx] &&
2035 MptDeviceDriverHandlers[cb_idx]->probe) {
2036 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2037 }
2038 }
2039
2040#ifdef CONFIG_PROC_FS
2041 /*
2042 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2043 */
2044 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2045 if (dent) {
2046 proc_create_single_data("info", S_IRUGO, dent,
2047 mpt_iocinfo_proc_show, ioc);
2048 proc_create_single_data("summary", S_IRUGO, dent,
2049 mpt_summary_proc_show, ioc);
2050 }
2051#endif
2052
2053 if (!ioc->alt_ioc)
2054 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2055 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2056
2057 return 0;
2058
2059out_remove_ioc:
2060 list_del(&ioc->list);
2061 if (ioc->alt_ioc)
2062 ioc->alt_ioc->alt_ioc = NULL;
2063
2064 destroy_workqueue(ioc->reset_work_q);
2065 ioc->reset_work_q = NULL;
2066
2067out_unmap_resources:
2068 iounmap(ioc->memmap);
2069 pci_disable_device(pdev);
2070 pci_release_selected_regions(pdev, ioc->bars);
2071
2072out_free_ioc:
2073 kfree(ioc);
2074
2075 return r;
2076}
2077
2078/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2079/**
2080 * mpt_detach - Remove a PCI intelligent MPT adapter.
2081 * @pdev: Pointer to pci_dev structure
2082 */
2083
2084void
2085mpt_detach(struct pci_dev *pdev)
2086{
2087 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2088 char pname[64];
2089 u8 cb_idx;
2090 unsigned long flags;
2091 struct workqueue_struct *wq;
2092
2093 /*
2094 * Stop polling ioc for fault condition
2095 */
2096 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2097 wq = ioc->reset_work_q;
2098 ioc->reset_work_q = NULL;
2099 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2100 cancel_delayed_work(&ioc->fault_reset_work);
2101 destroy_workqueue(wq);
2102
2103 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2104 wq = ioc->fw_event_q;
2105 ioc->fw_event_q = NULL;
2106 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2107 destroy_workqueue(wq);
2108
2109 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2110 remove_proc_entry(pname, NULL);
2111 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2112 remove_proc_entry(pname, NULL);
2113 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2114 remove_proc_entry(pname, NULL);
2115
2116 /* call per device driver remove entry point */
2117 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2118 if(MptDeviceDriverHandlers[cb_idx] &&
2119 MptDeviceDriverHandlers[cb_idx]->remove) {
2120 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2121 }
2122 }
2123
2124 /* Disable interrupts! */
2125 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2126
2127 ioc->active = 0;
2128 synchronize_irq(pdev->irq);
2129
2130 /* Clear any lingering interrupt */
2131 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2132
2133 CHIPREG_READ32(&ioc->chip->IntStatus);
2134
2135 mpt_adapter_dispose(ioc);
2136
2137}
2138
2139/**************************************************************************
2140 * Power Management
2141 */
2142#ifdef CONFIG_PM
2143/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2144/**
2145 * mpt_suspend - Fusion MPT base driver suspend routine.
2146 * @pdev: Pointer to pci_dev structure
2147 * @state: new state to enter
2148 */
2149int
2150mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2151{
2152 u32 device_state;
2153 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2154
2155 device_state = pci_choose_state(pdev, state);
2156 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2157 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2158 device_state);
2159
2160 /* put ioc into READY_STATE */
2161 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2162 printk(MYIOC_s_ERR_FMT
2163 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2164 }
2165
2166 /* disable interrupts */
2167 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2168 ioc->active = 0;
2169
2170 /* Clear any lingering interrupt */
2171 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2172
2173 free_irq(ioc->pci_irq, ioc);
2174 if (ioc->msi_enable)
2175 pci_disable_msi(ioc->pcidev);
2176 ioc->pci_irq = -1;
2177 pci_save_state(pdev);
2178 pci_disable_device(pdev);
2179 pci_release_selected_regions(pdev, ioc->bars);
2180 pci_set_power_state(pdev, device_state);
2181 return 0;
2182}
2183
2184/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2185/**
2186 * mpt_resume - Fusion MPT base driver resume routine.
2187 * @pdev: Pointer to pci_dev structure
2188 */
2189int
2190mpt_resume(struct pci_dev *pdev)
2191{
2192 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2193 u32 device_state = pdev->current_state;
2194 int recovery_state;
2195 int err;
2196
2197 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2198 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2199 device_state);
2200
2201 pci_set_power_state(pdev, PCI_D0);
2202 pci_enable_wake(pdev, PCI_D0, 0);
2203 pci_restore_state(pdev);
2204 ioc->pcidev = pdev;
2205 err = mpt_mapresources(ioc);
2206 if (err)
2207 return err;
2208
2209 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2210 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2211 ioc->add_sge = &mpt_add_sge_64bit_1078;
2212 else
2213 ioc->add_sge = &mpt_add_sge_64bit;
2214 ioc->add_chain = &mpt_add_chain_64bit;
2215 ioc->sg_addr_size = 8;
2216 } else {
2217
2218 ioc->add_sge = &mpt_add_sge;
2219 ioc->add_chain = &mpt_add_chain;
2220 ioc->sg_addr_size = 4;
2221 }
2222 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2223
2224 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2225 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2226 CHIPREG_READ32(&ioc->chip->Doorbell));
2227
2228 /*
2229 * Errata workaround for SAS pci express:
2230 * Upon returning to the D0 state, the contents of the doorbell will be
2231 * stale data, and this will incorrectly signal to the host driver that
2232 * the firmware is ready to process mpt commands. The workaround is
2233 * to issue a diagnostic reset.
2234 */
2235 if (ioc->bus_type == SAS && (pdev->device ==
2236 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2237 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2238 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2239 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2240 ioc->name);
2241 goto out;
2242 }
2243 }
2244
2245 /* bring ioc to operational state */
2246 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2247 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2248 CAN_SLEEP);
2249 if (recovery_state != 0)
2250 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2251 "error:[%x]\n", ioc->name, recovery_state);
2252 else
2253 printk(MYIOC_s_INFO_FMT
2254 "pci-resume: success\n", ioc->name);
2255 out:
2256 return 0;
2257
2258}
2259#endif
2260
2261static int
2262mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2263{
2264 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2265 ioc->bus_type != SPI) ||
2266 (MptDriverClass[index] == MPTFC_DRIVER &&
2267 ioc->bus_type != FC) ||
2268 (MptDriverClass[index] == MPTSAS_DRIVER &&
2269 ioc->bus_type != SAS))
2270 /* make sure we only call the relevant reset handler
2271 * for the bus */
2272 return 0;
2273 return (MptResetHandlers[index])(ioc, reset_phase);
2274}
2275
2276/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2277/**
2278 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2279 * @ioc: Pointer to MPT adapter structure
2280 * @reason: Event word / reason
2281 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2282 *
2283 * This routine performs all the steps necessary to bring the IOC
2284 * to a OPERATIONAL state.
2285 *
2286 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2287 * MPT adapter.
2288 *
2289 * Returns:
2290 * 0 for success
2291 * -1 if failed to get board READY
2292 * -2 if READY but IOCFacts Failed
2293 * -3 if READY but PrimeIOCFifos Failed
2294 * -4 if READY but IOCInit Failed
2295 * -5 if failed to enable_device and/or request_selected_regions
2296 * -6 if failed to upload firmware
2297 */
2298static int
2299mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2300{
2301 int hard_reset_done = 0;
2302 int alt_ioc_ready = 0;
2303 int hard;
2304 int rc=0;
2305 int ii;
2306 int ret = 0;
2307 int reset_alt_ioc_active = 0;
2308 int irq_allocated = 0;
2309 u8 *a;
2310
2311 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2312 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2313
2314 /* Disable reply interrupts (also blocks FreeQ) */
2315 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2316 ioc->active = 0;
2317
2318 if (ioc->alt_ioc) {
2319 if (ioc->alt_ioc->active ||
2320 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2321 reset_alt_ioc_active = 1;
2322 /* Disable alt-IOC's reply interrupts
2323 * (and FreeQ) for a bit
2324 **/
2325 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2326 0xFFFFFFFF);
2327 ioc->alt_ioc->active = 0;
2328 }
2329 }
2330
2331 hard = 1;
2332 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2333 hard = 0;
2334
2335 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2336 if (hard_reset_done == -4) {
2337 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2338 ioc->name);
2339
2340 if (reset_alt_ioc_active && ioc->alt_ioc) {
2341 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2342 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2343 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2344 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2345 ioc->alt_ioc->active = 1;
2346 }
2347
2348 } else {
2349 printk(MYIOC_s_WARN_FMT
2350 "NOT READY WARNING!\n", ioc->name);
2351 }
2352 ret = -1;
2353 goto out;
2354 }
2355
2356 /* hard_reset_done = 0 if a soft reset was performed
2357 * and 1 if a hard reset was performed.
2358 */
2359 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2360 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2361 alt_ioc_ready = 1;
2362 else
2363 printk(MYIOC_s_WARN_FMT
2364 ": alt-ioc Not ready WARNING!\n",
2365 ioc->alt_ioc->name);
2366 }
2367
2368 for (ii=0; ii<5; ii++) {
2369 /* Get IOC facts! Allow 5 retries */
2370 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2371 break;
2372 }
2373
2374
2375 if (ii == 5) {
2376 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2377 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2378 ret = -2;
2379 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2380 MptDisplayIocCapabilities(ioc);
2381 }
2382
2383 if (alt_ioc_ready) {
2384 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2385 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2386 "Initial Alt IocFacts failed rc=%x\n",
2387 ioc->name, rc));
2388 /* Retry - alt IOC was initialized once
2389 */
2390 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2391 }
2392 if (rc) {
2393 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2394 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2395 alt_ioc_ready = 0;
2396 reset_alt_ioc_active = 0;
2397 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2398 MptDisplayIocCapabilities(ioc->alt_ioc);
2399 }
2400 }
2401
2402 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2403 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2404 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2405 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2406 IORESOURCE_IO);
2407 if (pci_enable_device(ioc->pcidev))
2408 return -5;
2409 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2410 "mpt"))
2411 return -5;
2412 }
2413
2414 /*
2415 * Device is reset now. It must have de-asserted the interrupt line
2416 * (if it was asserted) and it should be safe to register for the
2417 * interrupt now.
2418 */
2419 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2420 ioc->pci_irq = -1;
2421 if (ioc->pcidev->irq) {
2422 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2423 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2424 ioc->name);
2425 else
2426 ioc->msi_enable = 0;
2427 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2428 IRQF_SHARED, ioc->name, ioc);
2429 if (rc < 0) {
2430 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2431 "interrupt %d!\n",
2432 ioc->name, ioc->pcidev->irq);
2433 if (ioc->msi_enable)
2434 pci_disable_msi(ioc->pcidev);
2435 ret = -EBUSY;
2436 goto out;
2437 }
2438 irq_allocated = 1;
2439 ioc->pci_irq = ioc->pcidev->irq;
2440 pci_set_master(ioc->pcidev); /* ?? */
2441 pci_set_drvdata(ioc->pcidev, ioc);
2442 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2443 "installed at interrupt %d\n", ioc->name,
2444 ioc->pcidev->irq));
2445 }
2446 }
2447
2448 /* Prime reply & request queues!
2449 * (mucho alloc's) Must be done prior to
2450 * init as upper addresses are needed for init.
2451 * If fails, continue with alt-ioc processing
2452 */
2453 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2454 ioc->name));
2455 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2456 ret = -3;
2457
2458 /* May need to check/upload firmware & data here!
2459 * If fails, continue with alt-ioc processing
2460 */
2461 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2462 ioc->name));
2463 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2464 ret = -4;
2465// NEW!
2466 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2467 printk(MYIOC_s_WARN_FMT
2468 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2469 ioc->alt_ioc->name, rc);
2470 alt_ioc_ready = 0;
2471 reset_alt_ioc_active = 0;
2472 }
2473
2474 if (alt_ioc_ready) {
2475 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2476 alt_ioc_ready = 0;
2477 reset_alt_ioc_active = 0;
2478 printk(MYIOC_s_WARN_FMT
2479 ": alt-ioc: (%d) init failure WARNING!\n",
2480 ioc->alt_ioc->name, rc);
2481 }
2482 }
2483
2484 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2485 if (ioc->upload_fw) {
2486 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2487 "firmware upload required!\n", ioc->name));
2488
2489 /* Controller is not operational, cannot do upload
2490 */
2491 if (ret == 0) {
2492 rc = mpt_do_upload(ioc, sleepFlag);
2493 if (rc == 0) {
2494 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2495 /*
2496 * Maintain only one pointer to FW memory
2497 * so there will not be two attempt to
2498 * downloadboot onboard dual function
2499 * chips (mpt_adapter_disable,
2500 * mpt_diag_reset)
2501 */
2502 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2503 "mpt_upload: alt_%s has cached_fw=%p \n",
2504 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2505 ioc->cached_fw = NULL;
2506 }
2507 } else {
2508 printk(MYIOC_s_WARN_FMT
2509 "firmware upload failure!\n", ioc->name);
2510 ret = -6;
2511 }
2512 }
2513 }
2514 }
2515
2516 /* Enable MPT base driver management of EventNotification
2517 * and EventAck handling.
2518 */
2519 if ((ret == 0) && (!ioc->facts.EventState)) {
2520 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2521 "SendEventNotification\n",
2522 ioc->name));
2523 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2524 }
2525
2526 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2527 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2528
2529 if (ret == 0) {
2530 /* Enable! (reply interrupt) */
2531 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2532 ioc->active = 1;
2533 }
2534 if (rc == 0) { /* alt ioc */
2535 if (reset_alt_ioc_active && ioc->alt_ioc) {
2536 /* (re)Enable alt-IOC! (reply interrupt) */
2537 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2538 "reply irq re-enabled\n",
2539 ioc->alt_ioc->name));
2540 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2541 MPI_HIM_DIM);
2542 ioc->alt_ioc->active = 1;
2543 }
2544 }
2545
2546
2547 /* Add additional "reason" check before call to GetLanConfigPages
2548 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2549 * recursive scenario; GetLanConfigPages times out, timer expired
2550 * routine calls HardResetHandler, which calls into here again,
2551 * and we try GetLanConfigPages again...
2552 */
2553 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2554
2555 /*
2556 * Initialize link list for inactive raid volumes.
2557 */
2558 mutex_init(&ioc->raid_data.inactive_list_mutex);
2559 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2560
2561 switch (ioc->bus_type) {
2562
2563 case SAS:
2564 /* clear persistency table */
2565 if(ioc->facts.IOCExceptions &
2566 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2567 ret = mptbase_sas_persist_operation(ioc,
2568 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2569 if(ret != 0)
2570 goto out;
2571 }
2572
2573 /* Find IM volumes
2574 */
2575 mpt_findImVolumes(ioc);
2576
2577 /* Check, and possibly reset, the coalescing value
2578 */
2579 mpt_read_ioc_pg_1(ioc);
2580
2581 break;
2582
2583 case FC:
2584 if ((ioc->pfacts[0].ProtocolFlags &
2585 MPI_PORTFACTS_PROTOCOL_LAN) &&
2586 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2587 /*
2588 * Pre-fetch the ports LAN MAC address!
2589 * (LANPage1_t stuff)
2590 */
2591 (void) GetLanConfigPages(ioc);
2592 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2593 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2594 "LanAddr = %pMR\n", ioc->name, a));
2595 }
2596 break;
2597
2598 case SPI:
2599 /* Get NVRAM and adapter maximums from SPP 0 and 2
2600 */
2601 mpt_GetScsiPortSettings(ioc, 0);
2602
2603 /* Get version and length of SDP 1
2604 */
2605 mpt_readScsiDevicePageHeaders(ioc, 0);
2606
2607 /* Find IM volumes
2608 */
2609 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2610 mpt_findImVolumes(ioc);
2611
2612 /* Check, and possibly reset, the coalescing value
2613 */
2614 mpt_read_ioc_pg_1(ioc);
2615
2616 mpt_read_ioc_pg_4(ioc);
2617
2618 break;
2619 }
2620
2621 GetIoUnitPage2(ioc);
2622 mpt_get_manufacturing_pg_0(ioc);
2623 }
2624
2625 out:
2626 if ((ret != 0) && irq_allocated) {
2627 free_irq(ioc->pci_irq, ioc);
2628 if (ioc->msi_enable)
2629 pci_disable_msi(ioc->pcidev);
2630 }
2631 return ret;
2632}
2633
2634/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2635/**
2636 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2637 * @ioc: Pointer to MPT adapter structure
2638 * @pdev: Pointer to (struct pci_dev) structure
2639 *
2640 * Search for PCI bus/dev_function which matches
2641 * PCI bus/dev_function (+/-1) for newly discovered 929,
2642 * 929X, 1030 or 1035.
2643 *
2644 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2645 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2646 */
2647static void
2648mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2649{
2650 struct pci_dev *peer=NULL;
2651 unsigned int slot = PCI_SLOT(pdev->devfn);
2652 unsigned int func = PCI_FUNC(pdev->devfn);
2653 MPT_ADAPTER *ioc_srch;
2654
2655 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2656 " searching for devfn match on %x or %x\n",
2657 ioc->name, pci_name(pdev), pdev->bus->number,
2658 pdev->devfn, func-1, func+1));
2659
2660 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2661 if (!peer) {
2662 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2663 if (!peer)
2664 return;
2665 }
2666
2667 list_for_each_entry(ioc_srch, &ioc_list, list) {
2668 struct pci_dev *_pcidev = ioc_srch->pcidev;
2669 if (_pcidev == peer) {
2670 /* Paranoia checks */
2671 if (ioc->alt_ioc != NULL) {
2672 printk(MYIOC_s_WARN_FMT
2673 "Oops, already bound (%s <==> %s)!\n",
2674 ioc->name, ioc->name, ioc->alt_ioc->name);
2675 break;
2676 } else if (ioc_srch->alt_ioc != NULL) {
2677 printk(MYIOC_s_WARN_FMT
2678 "Oops, already bound (%s <==> %s)!\n",
2679 ioc_srch->name, ioc_srch->name,
2680 ioc_srch->alt_ioc->name);
2681 break;
2682 }
2683 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2684 "FOUND! binding %s <==> %s\n",
2685 ioc->name, ioc->name, ioc_srch->name));
2686 ioc_srch->alt_ioc = ioc;
2687 ioc->alt_ioc = ioc_srch;
2688 }
2689 }
2690 pci_dev_put(peer);
2691}
2692
2693/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2694/**
2695 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2696 * @ioc: Pointer to MPT adapter structure
2697 */
2698static void
2699mpt_adapter_disable(MPT_ADAPTER *ioc)
2700{
2701 int sz;
2702 int ret;
2703
2704 if (ioc->cached_fw != NULL) {
2705 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2706 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2707 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2708 ioc->cached_fw, CAN_SLEEP)) < 0) {
2709 printk(MYIOC_s_WARN_FMT
2710 ": firmware downloadboot failure (%d)!\n",
2711 ioc->name, ret);
2712 }
2713 }
2714
2715 /*
2716 * Put the controller into ready state (if its not already)
2717 */
2718 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2719 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2720 CAN_SLEEP)) {
2721 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2722 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2723 "reset failed to put ioc in ready state!\n",
2724 ioc->name, __func__);
2725 } else
2726 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2727 "failed!\n", ioc->name, __func__);
2728 }
2729
2730
2731 /* Disable adapter interrupts! */
2732 synchronize_irq(ioc->pcidev->irq);
2733 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2734 ioc->active = 0;
2735
2736 /* Clear any lingering interrupt */
2737 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2738 CHIPREG_READ32(&ioc->chip->IntStatus);
2739
2740 if (ioc->alloc != NULL) {
2741 sz = ioc->alloc_sz;
2742 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2743 ioc->name, ioc->alloc, ioc->alloc_sz));
2744 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2745 ioc->alloc_dma);
2746 ioc->reply_frames = NULL;
2747 ioc->req_frames = NULL;
2748 ioc->alloc = NULL;
2749 ioc->alloc_total -= sz;
2750 }
2751
2752 if (ioc->sense_buf_pool != NULL) {
2753 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2754 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2755 ioc->sense_buf_pool_dma);
2756 ioc->sense_buf_pool = NULL;
2757 ioc->alloc_total -= sz;
2758 }
2759
2760 if (ioc->events != NULL){
2761 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2762 kfree(ioc->events);
2763 ioc->events = NULL;
2764 ioc->alloc_total -= sz;
2765 }
2766
2767 mpt_free_fw_memory(ioc);
2768
2769 kfree(ioc->spi_data.nvram);
2770 mpt_inactive_raid_list_free(ioc);
2771 kfree(ioc->raid_data.pIocPg2);
2772 kfree(ioc->raid_data.pIocPg3);
2773 ioc->spi_data.nvram = NULL;
2774 ioc->raid_data.pIocPg3 = NULL;
2775
2776 if (ioc->spi_data.pIocPg4 != NULL) {
2777 sz = ioc->spi_data.IocPg4Sz;
2778 pci_free_consistent(ioc->pcidev, sz,
2779 ioc->spi_data.pIocPg4,
2780 ioc->spi_data.IocPg4_dma);
2781 ioc->spi_data.pIocPg4 = NULL;
2782 ioc->alloc_total -= sz;
2783 }
2784
2785 if (ioc->ReqToChain != NULL) {
2786 kfree(ioc->ReqToChain);
2787 kfree(ioc->RequestNB);
2788 ioc->ReqToChain = NULL;
2789 }
2790
2791 kfree(ioc->ChainToChain);
2792 ioc->ChainToChain = NULL;
2793
2794 if (ioc->HostPageBuffer != NULL) {
2795 if((ret = mpt_host_page_access_control(ioc,
2796 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2797 printk(MYIOC_s_ERR_FMT
2798 ": %s: host page buffers free failed (%d)!\n",
2799 ioc->name, __func__, ret);
2800 }
2801 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2802 "HostPageBuffer free @ %p, sz=%d bytes\n",
2803 ioc->name, ioc->HostPageBuffer,
2804 ioc->HostPageBuffer_sz));
2805 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2806 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2807 ioc->HostPageBuffer = NULL;
2808 ioc->HostPageBuffer_sz = 0;
2809 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2810 }
2811
2812 pci_set_drvdata(ioc->pcidev, NULL);
2813}
2814/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2815/**
2816 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2817 * @ioc: Pointer to MPT adapter structure
2818 *
2819 * This routine unregisters h/w resources and frees all alloc'd memory
2820 * associated with a MPT adapter structure.
2821 */
2822static void
2823mpt_adapter_dispose(MPT_ADAPTER *ioc)
2824{
2825 int sz_first, sz_last;
2826
2827 if (ioc == NULL)
2828 return;
2829
2830 sz_first = ioc->alloc_total;
2831
2832 mpt_adapter_disable(ioc);
2833
2834 if (ioc->pci_irq != -1) {
2835 free_irq(ioc->pci_irq, ioc);
2836 if (ioc->msi_enable)
2837 pci_disable_msi(ioc->pcidev);
2838 ioc->pci_irq = -1;
2839 }
2840
2841 if (ioc->memmap != NULL) {
2842 iounmap(ioc->memmap);
2843 ioc->memmap = NULL;
2844 }
2845
2846 pci_disable_device(ioc->pcidev);
2847 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2848
2849 /* Zap the adapter lookup ptr! */
2850 list_del(&ioc->list);
2851
2852 sz_last = ioc->alloc_total;
2853 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2854 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2855
2856 if (ioc->alt_ioc)
2857 ioc->alt_ioc->alt_ioc = NULL;
2858
2859 kfree(ioc);
2860}
2861
2862/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2863/**
2864 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2865 * @ioc: Pointer to MPT adapter structure
2866 */
2867static void
2868MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2869{
2870 int i = 0;
2871
2872 printk(KERN_INFO "%s: ", ioc->name);
2873 if (ioc->prod_name)
2874 pr_cont("%s: ", ioc->prod_name);
2875 pr_cont("Capabilities={");
2876
2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2878 pr_cont("Initiator");
2879 i++;
2880 }
2881
2882 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2883 pr_cont("%sTarget", i ? "," : "");
2884 i++;
2885 }
2886
2887 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2888 pr_cont("%sLAN", i ? "," : "");
2889 i++;
2890 }
2891
2892#if 0
2893 /*
2894 * This would probably evoke more questions than it's worth
2895 */
2896 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2897 pr_cont("%sLogBusAddr", i ? "," : "");
2898 i++;
2899 }
2900#endif
2901
2902 pr_cont("}\n");
2903}
2904
2905/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2906/**
2907 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2908 * @ioc: Pointer to MPT_ADAPTER structure
2909 * @force: Force hard KickStart of IOC
2910 * @sleepFlag: Specifies whether the process can sleep
2911 *
2912 * Returns:
2913 * 1 - DIAG reset and READY
2914 * 0 - READY initially OR soft reset and READY
2915 * -1 - Any failure on KickStart
2916 * -2 - Msg Unit Reset Failed
2917 * -3 - IO Unit Reset Failed
2918 * -4 - IOC owned by a PEER
2919 */
2920static int
2921MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2922{
2923 u32 ioc_state;
2924 int statefault = 0;
2925 int cntdn;
2926 int hard_reset_done = 0;
2927 int r;
2928 int ii;
2929 int whoinit;
2930
2931 /* Get current [raw] IOC state */
2932 ioc_state = mpt_GetIocState(ioc, 0);
2933 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2934
2935 /*
2936 * Check to see if IOC got left/stuck in doorbell handshake
2937 * grip of death. If so, hard reset the IOC.
2938 */
2939 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2940 statefault = 1;
2941 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2942 ioc->name);
2943 }
2944
2945 /* Is it already READY? */
2946 if (!statefault &&
2947 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2948 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2949 "IOC is in READY state\n", ioc->name));
2950 return 0;
2951 }
2952
2953 /*
2954 * Check to see if IOC is in FAULT state.
2955 */
2956 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2957 statefault = 2;
2958 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2959 ioc->name);
2960 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2961 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2962 }
2963
2964 /*
2965 * Hmmm... Did it get left operational?
2966 */
2967 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2968 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2969 ioc->name));
2970
2971 /* Check WhoInit.
2972 * If PCI Peer, exit.
2973 * Else, if no fault conditions are present, issue a MessageUnitReset
2974 * Else, fall through to KickStart case
2975 */
2976 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2977 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2978 "whoinit 0x%x statefault %d force %d\n",
2979 ioc->name, whoinit, statefault, force));
2980 if (whoinit == MPI_WHOINIT_PCI_PEER)
2981 return -4;
2982 else {
2983 if ((statefault == 0 ) && (force == 0)) {
2984 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2985 return 0;
2986 }
2987 statefault = 3;
2988 }
2989 }
2990
2991 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2992 if (hard_reset_done < 0)
2993 return -1;
2994
2995 /*
2996 * Loop here waiting for IOC to come READY.
2997 */
2998 ii = 0;
2999 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
3000
3001 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
3002 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
3003 /*
3004 * BIOS or previous driver load left IOC in OP state.
3005 * Reset messaging FIFOs.
3006 */
3007 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3008 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3009 return -2;
3010 }
3011 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3012 /*
3013 * Something is wrong. Try to get IOC back
3014 * to a known state.
3015 */
3016 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3017 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3018 return -3;
3019 }
3020 }
3021
3022 ii++; cntdn--;
3023 if (!cntdn) {
3024 printk(MYIOC_s_ERR_FMT
3025 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3026 ioc->name, ioc_state, (int)((ii+5)/HZ));
3027 return -ETIME;
3028 }
3029
3030 if (sleepFlag == CAN_SLEEP) {
3031 msleep(1);
3032 } else {
3033 mdelay (1); /* 1 msec delay */
3034 }
3035
3036 }
3037
3038 if (statefault < 3) {
3039 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3040 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3041 }
3042
3043 return hard_reset_done;
3044}
3045
3046/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3047/**
3048 * mpt_GetIocState - Get the current state of a MPT adapter.
3049 * @ioc: Pointer to MPT_ADAPTER structure
3050 * @cooked: Request raw or cooked IOC state
3051 *
3052 * Returns all IOC Doorbell register bits if cooked==0, else just the
3053 * Doorbell bits in MPI_IOC_STATE_MASK.
3054 */
3055u32
3056mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3057{
3058 u32 s, sc;
3059
3060 /* Get! */
3061 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3062 sc = s & MPI_IOC_STATE_MASK;
3063
3064 /* Save! */
3065 ioc->last_state = sc;
3066
3067 return cooked ? sc : s;
3068}
3069
3070/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3071/**
3072 * GetIocFacts - Send IOCFacts request to MPT adapter.
3073 * @ioc: Pointer to MPT_ADAPTER structure
3074 * @sleepFlag: Specifies whether the process can sleep
3075 * @reason: If recovery, only update facts.
3076 *
3077 * Returns 0 for success, non-zero for failure.
3078 */
3079static int
3080GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3081{
3082 IOCFacts_t get_facts;
3083 IOCFactsReply_t *facts;
3084 int r;
3085 int req_sz;
3086 int reply_sz;
3087 int sz;
3088 u32 status, vv;
3089 u8 shiftFactor=1;
3090
3091 /* IOC *must* NOT be in RESET state! */
3092 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3093 printk(KERN_ERR MYNAM
3094 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3095 ioc->name, ioc->last_state);
3096 return -44;
3097 }
3098
3099 facts = &ioc->facts;
3100
3101 /* Destination (reply area)... */
3102 reply_sz = sizeof(*facts);
3103 memset(facts, 0, reply_sz);
3104
3105 /* Request area (get_facts on the stack right now!) */
3106 req_sz = sizeof(get_facts);
3107 memset(&get_facts, 0, req_sz);
3108
3109 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3110 /* Assert: All other get_facts fields are zero! */
3111
3112 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3113 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3114 ioc->name, req_sz, reply_sz));
3115
3116 /* No non-zero fields in the get_facts request are greater than
3117 * 1 byte in size, so we can just fire it off as is.
3118 */
3119 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3120 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3121 if (r != 0)
3122 return r;
3123
3124 /*
3125 * Now byte swap (GRRR) the necessary fields before any further
3126 * inspection of reply contents.
3127 *
3128 * But need to do some sanity checks on MsgLength (byte) field
3129 * to make sure we don't zero IOC's req_sz!
3130 */
3131 /* Did we get a valid reply? */
3132 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3133 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3134 /*
3135 * If not been here, done that, save off first WhoInit value
3136 */
3137 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3138 ioc->FirstWhoInit = facts->WhoInit;
3139 }
3140
3141 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3142 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3143 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3144 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3145 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3146 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3147 /* CHECKME! IOCStatus, IOCLogInfo */
3148
3149 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3150 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3151
3152 /*
3153 * FC f/w version changed between 1.1 and 1.2
3154 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3155 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3156 */
3157 if (facts->MsgVersion < MPI_VERSION_01_02) {
3158 /*
3159 * Handle old FC f/w style, convert to new...
3160 */
3161 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3162 facts->FWVersion.Word =
3163 ((oldv<<12) & 0xFF000000) |
3164 ((oldv<<8) & 0x000FFF00);
3165 } else
3166 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3167
3168 facts->ProductID = le16_to_cpu(facts->ProductID);
3169
3170 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3171 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3172 ioc->ir_firmware = 1;
3173
3174 facts->CurrentHostMfaHighAddr =
3175 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3176 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3177 facts->CurrentSenseBufferHighAddr =
3178 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3179 facts->CurReplyFrameSize =
3180 le16_to_cpu(facts->CurReplyFrameSize);
3181 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3182
3183 /*
3184 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3185 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3186 * to 14 in MPI-1.01.0x.
3187 */
3188 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3189 facts->MsgVersion > MPI_VERSION_01_00) {
3190 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3191 }
3192
3193 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3194
3195 if (!facts->RequestFrameSize) {
3196 /* Something is wrong! */
3197 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3198 ioc->name);
3199 return -55;
3200 }
3201
3202 r = sz = facts->BlockSize;
3203 vv = ((63 / (sz * 4)) + 1) & 0x03;
3204 ioc->NB_for_64_byte_frame = vv;
3205 while ( sz )
3206 {
3207 shiftFactor++;
3208 sz = sz >> 1;
3209 }
3210 ioc->NBShiftFactor = shiftFactor;
3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3212 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3213 ioc->name, vv, shiftFactor, r));
3214
3215 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3216 /*
3217 * Set values for this IOC's request & reply frame sizes,
3218 * and request & reply queue depths...
3219 */
3220 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3221 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3222 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3223 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3224
3225 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3226 ioc->name, ioc->reply_sz, ioc->reply_depth));
3227 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3228 ioc->name, ioc->req_sz, ioc->req_depth));
3229
3230 /* Get port facts! */
3231 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3232 return r;
3233 }
3234 } else {
3235 printk(MYIOC_s_ERR_FMT
3236 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3237 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3238 RequestFrameSize)/sizeof(u32)));
3239 return -66;
3240 }
3241
3242 return 0;
3243}
3244
3245/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3246/**
3247 * GetPortFacts - Send PortFacts request to MPT adapter.
3248 * @ioc: Pointer to MPT_ADAPTER structure
3249 * @portnum: Port number
3250 * @sleepFlag: Specifies whether the process can sleep
3251 *
3252 * Returns 0 for success, non-zero for failure.
3253 */
3254static int
3255GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3256{
3257 PortFacts_t get_pfacts;
3258 PortFactsReply_t *pfacts;
3259 int ii;
3260 int req_sz;
3261 int reply_sz;
3262 int max_id;
3263
3264 /* IOC *must* NOT be in RESET state! */
3265 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3266 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3267 ioc->name, ioc->last_state );
3268 return -4;
3269 }
3270
3271 pfacts = &ioc->pfacts[portnum];
3272
3273 /* Destination (reply area)... */
3274 reply_sz = sizeof(*pfacts);
3275 memset(pfacts, 0, reply_sz);
3276
3277 /* Request area (get_pfacts on the stack right now!) */
3278 req_sz = sizeof(get_pfacts);
3279 memset(&get_pfacts, 0, req_sz);
3280
3281 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3282 get_pfacts.PortNumber = portnum;
3283 /* Assert: All other get_pfacts fields are zero! */
3284
3285 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3286 ioc->name, portnum));
3287
3288 /* No non-zero fields in the get_pfacts request are greater than
3289 * 1 byte in size, so we can just fire it off as is.
3290 */
3291 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3292 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3293 if (ii != 0)
3294 return ii;
3295
3296 /* Did we get a valid reply? */
3297
3298 /* Now byte swap the necessary fields in the response. */
3299 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3300 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3301 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3302 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3303 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3304 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3305 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3306 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3307 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3308
3309 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3310 pfacts->MaxDevices;
3311 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3312 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3313
3314 /*
3315 * Place all the devices on channels
3316 *
3317 * (for debuging)
3318 */
3319 if (mpt_channel_mapping) {
3320 ioc->devices_per_bus = 1;
3321 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3322 }
3323
3324 return 0;
3325}
3326
3327/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3328/**
3329 * SendIocInit - Send IOCInit request to MPT adapter.
3330 * @ioc: Pointer to MPT_ADAPTER structure
3331 * @sleepFlag: Specifies whether the process can sleep
3332 *
3333 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3334 *
3335 * Returns 0 for success, non-zero for failure.
3336 */
3337static int
3338SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3339{
3340 IOCInit_t ioc_init;
3341 MPIDefaultReply_t init_reply;
3342 u32 state;
3343 int r;
3344 int count;
3345 int cntdn;
3346
3347 memset(&ioc_init, 0, sizeof(ioc_init));
3348 memset(&init_reply, 0, sizeof(init_reply));
3349
3350 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3351 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3352
3353 /* If we are in a recovery mode and we uploaded the FW image,
3354 * then this pointer is not NULL. Skip the upload a second time.
3355 * Set this flag if cached_fw set for either IOC.
3356 */
3357 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3358 ioc->upload_fw = 1;
3359 else
3360 ioc->upload_fw = 0;
3361 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3362 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3363
3364 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3365 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3366
3367 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3368 ioc->name, ioc->facts.MsgVersion));
3369 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3370 // set MsgVersion and HeaderVersion host driver was built with
3371 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3372 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3373
3374 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3375 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3376 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3377 return -99;
3378 }
3379 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3380
3381 if (ioc->sg_addr_size == sizeof(u64)) {
3382 /* Save the upper 32-bits of the request
3383 * (reply) and sense buffers.
3384 */
3385 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3386 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3387 } else {
3388 /* Force 32-bit addressing */
3389 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3390 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3391 }
3392
3393 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3394 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3395 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3396 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3397
3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3399 ioc->name, &ioc_init));
3400
3401 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3402 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3403 if (r != 0) {
3404 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3405 return r;
3406 }
3407
3408 /* No need to byte swap the multibyte fields in the reply
3409 * since we don't even look at its contents.
3410 */
3411
3412 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3413 ioc->name, &ioc_init));
3414
3415 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3416 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3417 return r;
3418 }
3419
3420 /* YIKES! SUPER IMPORTANT!!!
3421 * Poll IocState until _OPERATIONAL while IOC is doing
3422 * LoopInit and TargetDiscovery!
3423 */
3424 count = 0;
3425 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3426 state = mpt_GetIocState(ioc, 1);
3427 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3428 if (sleepFlag == CAN_SLEEP) {
3429 msleep(1);
3430 } else {
3431 mdelay(1);
3432 }
3433
3434 if (!cntdn) {
3435 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3436 ioc->name, (int)((count+5)/HZ));
3437 return -9;
3438 }
3439
3440 state = mpt_GetIocState(ioc, 1);
3441 count++;
3442 }
3443 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3444 ioc->name, count));
3445
3446 ioc->aen_event_read_flag=0;
3447 return r;
3448}
3449
3450/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3451/**
3452 * SendPortEnable - Send PortEnable request to MPT adapter port.
3453 * @ioc: Pointer to MPT_ADAPTER structure
3454 * @portnum: Port number to enable
3455 * @sleepFlag: Specifies whether the process can sleep
3456 *
3457 * Send PortEnable to bring IOC to OPERATIONAL state.
3458 *
3459 * Returns 0 for success, non-zero for failure.
3460 */
3461static int
3462SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3463{
3464 PortEnable_t port_enable;
3465 MPIDefaultReply_t reply_buf;
3466 int rc;
3467 int req_sz;
3468 int reply_sz;
3469
3470 /* Destination... */
3471 reply_sz = sizeof(MPIDefaultReply_t);
3472 memset(&reply_buf, 0, reply_sz);
3473
3474 req_sz = sizeof(PortEnable_t);
3475 memset(&port_enable, 0, req_sz);
3476
3477 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3478 port_enable.PortNumber = portnum;
3479/* port_enable.ChainOffset = 0; */
3480/* port_enable.MsgFlags = 0; */
3481/* port_enable.MsgContext = 0; */
3482
3483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3484 ioc->name, portnum, &port_enable));
3485
3486 /* RAID FW may take a long time to enable
3487 */
3488 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3489 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3490 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3491 300 /*seconds*/, sleepFlag);
3492 } else {
3493 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3494 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3495 30 /*seconds*/, sleepFlag);
3496 }
3497 return rc;
3498}
3499
3500/**
3501 * mpt_alloc_fw_memory - allocate firmware memory
3502 * @ioc: Pointer to MPT_ADAPTER structure
3503 * @size: total FW bytes
3504 *
3505 * If memory has already been allocated, the same (cached) value
3506 * is returned.
3507 *
3508 * Return 0 if successful, or non-zero for failure
3509 **/
3510int
3511mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3512{
3513 int rc;
3514
3515 if (ioc->cached_fw) {
3516 rc = 0; /* use already allocated memory */
3517 goto out;
3518 }
3519 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3520 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3521 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3522 rc = 0;
3523 goto out;
3524 }
3525 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3526 if (!ioc->cached_fw) {
3527 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3528 ioc->name);
3529 rc = -1;
3530 } else {
3531 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3532 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3533 ioc->alloc_total += size;
3534 rc = 0;
3535 }
3536 out:
3537 return rc;
3538}
3539
3540/**
3541 * mpt_free_fw_memory - free firmware memory
3542 * @ioc: Pointer to MPT_ADAPTER structure
3543 *
3544 * If alt_img is NULL, delete from ioc structure.
3545 * Else, delete a secondary image in same format.
3546 **/
3547void
3548mpt_free_fw_memory(MPT_ADAPTER *ioc)
3549{
3550 int sz;
3551
3552 if (!ioc->cached_fw)
3553 return;
3554
3555 sz = ioc->facts.FWImageSize;
3556 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3557 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3558 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3559 ioc->alloc_total -= sz;
3560 ioc->cached_fw = NULL;
3561}
3562
3563/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3564/**
3565 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3566 * @ioc: Pointer to MPT_ADAPTER structure
3567 * @sleepFlag: Specifies whether the process can sleep
3568 *
3569 * Returns 0 for success, >0 for handshake failure
3570 * <0 for fw upload failure.
3571 *
3572 * Remark: If bound IOC and a successful FWUpload was performed
3573 * on the bound IOC, the second image is discarded
3574 * and memory is free'd. Both channels must upload to prevent
3575 * IOC from running in degraded mode.
3576 */
3577static int
3578mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3579{
3580 u8 reply[sizeof(FWUploadReply_t)];
3581 FWUpload_t *prequest;
3582 FWUploadReply_t *preply;
3583 FWUploadTCSGE_t *ptcsge;
3584 u32 flagsLength;
3585 int ii, sz, reply_sz;
3586 int cmdStatus;
3587 int request_size;
3588 /* If the image size is 0, we are done.
3589 */
3590 if ((sz = ioc->facts.FWImageSize) == 0)
3591 return 0;
3592
3593 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3594 return -ENOMEM;
3595
3596 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3597 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3598
3599 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3600 kzalloc(ioc->req_sz, GFP_KERNEL);
3601 if (!prequest) {
3602 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3603 "while allocating memory \n", ioc->name));
3604 mpt_free_fw_memory(ioc);
3605 return -ENOMEM;
3606 }
3607
3608 preply = (FWUploadReply_t *)&reply;
3609
3610 reply_sz = sizeof(reply);
3611 memset(preply, 0, reply_sz);
3612
3613 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3614 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3615
3616 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3617 ptcsge->DetailsLength = 12;
3618 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3619 ptcsge->ImageSize = cpu_to_le32(sz);
3620 ptcsge++;
3621
3622 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3623 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3624 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3625 ioc->SGE_size;
3626 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3627 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3628 ioc->facts.FWImageSize, request_size));
3629 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3630
3631 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3632 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3633
3634 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3635 "rc=%x \n", ioc->name, ii));
3636
3637 cmdStatus = -EFAULT;
3638 if (ii == 0) {
3639 /* Handshake transfer was complete and successful.
3640 * Check the Reply Frame.
3641 */
3642 int status;
3643 status = le16_to_cpu(preply->IOCStatus) &
3644 MPI_IOCSTATUS_MASK;
3645 if (status == MPI_IOCSTATUS_SUCCESS &&
3646 ioc->facts.FWImageSize ==
3647 le32_to_cpu(preply->ActualImageSize))
3648 cmdStatus = 0;
3649 }
3650 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3651 ioc->name, cmdStatus));
3652
3653
3654 if (cmdStatus) {
3655 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3656 "freeing image \n", ioc->name));
3657 mpt_free_fw_memory(ioc);
3658 }
3659 kfree(prequest);
3660
3661 return cmdStatus;
3662}
3663
3664/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3665/**
3666 * mpt_downloadboot - DownloadBoot code
3667 * @ioc: Pointer to MPT_ADAPTER structure
3668 * @pFwHeader: Pointer to firmware header info
3669 * @sleepFlag: Specifies whether the process can sleep
3670 *
3671 * FwDownloadBoot requires Programmed IO access.
3672 *
3673 * Returns 0 for success
3674 * -1 FW Image size is 0
3675 * -2 No valid cached_fw Pointer
3676 * <0 for fw upload failure.
3677 */
3678static int
3679mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3680{
3681 MpiExtImageHeader_t *pExtImage;
3682 u32 fwSize;
3683 u32 diag0val;
3684 int count;
3685 u32 *ptrFw;
3686 u32 diagRwData;
3687 u32 nextImage;
3688 u32 load_addr;
3689 u32 ioc_state=0;
3690
3691 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3692 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3693
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3696 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3697 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3698 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3699 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3700
3701 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3702
3703 /* wait 1 msec */
3704 if (sleepFlag == CAN_SLEEP) {
3705 msleep(1);
3706 } else {
3707 mdelay (1);
3708 }
3709
3710 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3711 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3712
3713 for (count = 0; count < 30; count ++) {
3714 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3715 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3716 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3717 ioc->name, count));
3718 break;
3719 }
3720 /* wait .1 sec */
3721 if (sleepFlag == CAN_SLEEP) {
3722 msleep (100);
3723 } else {
3724 mdelay (100);
3725 }
3726 }
3727
3728 if ( count == 30 ) {
3729 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3730 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3731 ioc->name, diag0val));
3732 return -3;
3733 }
3734
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3737 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3738 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3739 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3740 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3741
3742 /* Set the DiagRwEn and Disable ARM bits */
3743 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3744
3745 fwSize = (pFwHeader->ImageSize + 3)/4;
3746 ptrFw = (u32 *) pFwHeader;
3747
3748 /* Write the LoadStartAddress to the DiagRw Address Register
3749 * using Programmed IO
3750 */
3751 if (ioc->errata_flag_1064)
3752 pci_enable_io_access(ioc->pcidev);
3753
3754 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3755 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3756 ioc->name, pFwHeader->LoadStartAddress));
3757
3758 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3759 ioc->name, fwSize*4, ptrFw));
3760 while (fwSize--) {
3761 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3762 }
3763
3764 nextImage = pFwHeader->NextImageHeaderOffset;
3765 while (nextImage) {
3766 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3767
3768 load_addr = pExtImage->LoadStartAddress;
3769
3770 fwSize = (pExtImage->ImageSize + 3) >> 2;
3771 ptrFw = (u32 *)pExtImage;
3772
3773 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3774 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3776
3777 while (fwSize--) {
3778 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3779 }
3780 nextImage = pExtImage->NextImageHeaderOffset;
3781 }
3782
3783 /* Write the IopResetVectorRegAddr */
3784 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3786
3787 /* Write the IopResetVectorValue */
3788 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3790
3791 /* Clear the internal flash bad bit - autoincrementing register,
3792 * so must do two writes.
3793 */
3794 if (ioc->bus_type == SPI) {
3795 /*
3796 * 1030 and 1035 H/W errata, workaround to access
3797 * the ClearFlashBadSignatureBit
3798 */
3799 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3800 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3801 diagRwData |= 0x40000000;
3802 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3803 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3804
3805 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3806 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3807 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3808 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3809
3810 /* wait 1 msec */
3811 if (sleepFlag == CAN_SLEEP) {
3812 msleep (1);
3813 } else {
3814 mdelay (1);
3815 }
3816 }
3817
3818 if (ioc->errata_flag_1064)
3819 pci_disable_io_access(ioc->pcidev);
3820
3821 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3822 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3823 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3824 ioc->name, diag0val));
3825 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3826 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3827 ioc->name, diag0val));
3828 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3829
3830 /* Write 0xFF to reset the sequencer */
3831 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3832
3833 if (ioc->bus_type == SAS) {
3834 ioc_state = mpt_GetIocState(ioc, 0);
3835 if ( (GetIocFacts(ioc, sleepFlag,
3836 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3837 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3838 ioc->name, ioc_state));
3839 return -EFAULT;
3840 }
3841 }
3842
3843 for (count=0; count<HZ*20; count++) {
3844 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3846 "downloadboot successful! (count=%d) IocState=%x\n",
3847 ioc->name, count, ioc_state));
3848 if (ioc->bus_type == SAS) {
3849 return 0;
3850 }
3851 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3852 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3853 "downloadboot: SendIocInit failed\n",
3854 ioc->name));
3855 return -EFAULT;
3856 }
3857 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3858 "downloadboot: SendIocInit successful\n",
3859 ioc->name));
3860 return 0;
3861 }
3862 if (sleepFlag == CAN_SLEEP) {
3863 msleep (10);
3864 } else {
3865 mdelay (10);
3866 }
3867 }
3868 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3869 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3870 return -EFAULT;
3871}
3872
3873/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3874/**
3875 * KickStart - Perform hard reset of MPT adapter.
3876 * @ioc: Pointer to MPT_ADAPTER structure
3877 * @force: Force hard reset
3878 * @sleepFlag: Specifies whether the process can sleep
3879 *
3880 * This routine places MPT adapter in diagnostic mode via the
3881 * WriteSequence register, and then performs a hard reset of adapter
3882 * via the Diagnostic register.
3883 *
3884 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3885 * or NO_SLEEP (interrupt thread, use mdelay)
3886 * force - 1 if doorbell active, board fault state
3887 * board operational, IOC_RECOVERY or
3888 * IOC_BRINGUP and there is an alt_ioc.
3889 * 0 else
3890 *
3891 * Returns:
3892 * 1 - hard reset, READY
3893 * 0 - no reset due to History bit, READY
3894 * -1 - no reset due to History bit but not READY
3895 * OR reset but failed to come READY
3896 * -2 - no reset, could not enter DIAG mode
3897 * -3 - reset but bad FW bit
3898 */
3899static int
3900KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3901{
3902 int hard_reset_done = 0;
3903 u32 ioc_state=0;
3904 int cnt,cntdn;
3905
3906 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3907 if (ioc->bus_type == SPI) {
3908 /* Always issue a Msg Unit Reset first. This will clear some
3909 * SCSI bus hang conditions.
3910 */
3911 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3912
3913 if (sleepFlag == CAN_SLEEP) {
3914 msleep (1000);
3915 } else {
3916 mdelay (1000);
3917 }
3918 }
3919
3920 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3921 if (hard_reset_done < 0)
3922 return hard_reset_done;
3923
3924 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3925 ioc->name));
3926
3927 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3928 for (cnt=0; cnt<cntdn; cnt++) {
3929 ioc_state = mpt_GetIocState(ioc, 1);
3930 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3931 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3932 ioc->name, cnt));
3933 return hard_reset_done;
3934 }
3935 if (sleepFlag == CAN_SLEEP) {
3936 msleep (10);
3937 } else {
3938 mdelay (10);
3939 }
3940 }
3941
3942 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3943 ioc->name, mpt_GetIocState(ioc, 0)));
3944 return -1;
3945}
3946
3947/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3948/**
3949 * mpt_diag_reset - Perform hard reset of the adapter.
3950 * @ioc: Pointer to MPT_ADAPTER structure
3951 * @ignore: Set if to honor and clear to ignore
3952 * the reset history bit
3953 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3954 * else set to NO_SLEEP (use mdelay instead)
3955 *
3956 * This routine places the adapter in diagnostic mode via the
3957 * WriteSequence register and then performs a hard reset of adapter
3958 * via the Diagnostic register. Adapter should be in ready state
3959 * upon successful completion.
3960 *
3961 * Returns: 1 hard reset successful
3962 * 0 no reset performed because reset history bit set
3963 * -2 enabling diagnostic mode failed
3964 * -3 diagnostic reset failed
3965 */
3966static int
3967mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3968{
3969 u32 diag0val;
3970 u32 doorbell;
3971 int hard_reset_done = 0;
3972 int count = 0;
3973 u32 diag1val = 0;
3974 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3975 u8 cb_idx;
3976
3977 /* Clear any existing interrupts */
3978 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3979
3980 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3981
3982 if (!ignore)
3983 return 0;
3984
3985 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3986 "address=%p\n", ioc->name, __func__,
3987 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3988 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3989 if (sleepFlag == CAN_SLEEP)
3990 msleep(1);
3991 else
3992 mdelay(1);
3993
3994 /*
3995 * Call each currently registered protocol IOC reset handler
3996 * with pre-reset indication.
3997 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3998 * MptResetHandlers[] registered yet.
3999 */
4000 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4001 if (MptResetHandlers[cb_idx])
4002 (*(MptResetHandlers[cb_idx]))(ioc,
4003 MPT_IOC_PRE_RESET);
4004 }
4005
4006 for (count = 0; count < 60; count ++) {
4007 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4008 doorbell &= MPI_IOC_STATE_MASK;
4009
4010 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4011 "looking for READY STATE: doorbell=%x"
4012 " count=%d\n",
4013 ioc->name, doorbell, count));
4014
4015 if (doorbell == MPI_IOC_STATE_READY) {
4016 return 1;
4017 }
4018
4019 /* wait 1 sec */
4020 if (sleepFlag == CAN_SLEEP)
4021 msleep(1000);
4022 else
4023 mdelay(1000);
4024 }
4025 return -1;
4026 }
4027
4028 /* Use "Diagnostic reset" method! (only thing available!) */
4029 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4030
4031 if (ioc->debug_level & MPT_DEBUG) {
4032 if (ioc->alt_ioc)
4033 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4034 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4035 ioc->name, diag0val, diag1val));
4036 }
4037
4038 /* Do the reset if we are told to ignore the reset history
4039 * or if the reset history is 0
4040 */
4041 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4042 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4043 /* Write magic sequence to WriteSequence register
4044 * Loop until in diagnostic mode
4045 */
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4048 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4049 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4050 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4051 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4052
4053 /* wait 100 msec */
4054 if (sleepFlag == CAN_SLEEP) {
4055 msleep (100);
4056 } else {
4057 mdelay (100);
4058 }
4059
4060 count++;
4061 if (count > 20) {
4062 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4063 ioc->name, diag0val);
4064 return -2;
4065
4066 }
4067
4068 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4069
4070 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4071 ioc->name, diag0val));
4072 }
4073
4074 if (ioc->debug_level & MPT_DEBUG) {
4075 if (ioc->alt_ioc)
4076 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4077 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4078 ioc->name, diag0val, diag1val));
4079 }
4080 /*
4081 * Disable the ARM (Bug fix)
4082 *
4083 */
4084 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4085 mdelay(1);
4086
4087 /*
4088 * Now hit the reset bit in the Diagnostic register
4089 * (THE BIG HAMMER!) (Clears DRWE bit).
4090 */
4091 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4092 hard_reset_done = 1;
4093 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4094 ioc->name));
4095
4096 /*
4097 * Call each currently registered protocol IOC reset handler
4098 * with pre-reset indication.
4099 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4100 * MptResetHandlers[] registered yet.
4101 */
4102 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4103 if (MptResetHandlers[cb_idx]) {
4104 mpt_signal_reset(cb_idx,
4105 ioc, MPT_IOC_PRE_RESET);
4106 if (ioc->alt_ioc) {
4107 mpt_signal_reset(cb_idx,
4108 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4109 }
4110 }
4111 }
4112
4113 if (ioc->cached_fw)
4114 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4115 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4116 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4117 else
4118 cached_fw = NULL;
4119 if (cached_fw) {
4120 /* If the DownloadBoot operation fails, the
4121 * IOC will be left unusable. This is a fatal error
4122 * case. _diag_reset will return < 0
4123 */
4124 for (count = 0; count < 30; count ++) {
4125 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4126 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4127 break;
4128 }
4129
4130 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4131 ioc->name, diag0val, count));
4132 /* wait 1 sec */
4133 if (sleepFlag == CAN_SLEEP) {
4134 msleep (1000);
4135 } else {
4136 mdelay (1000);
4137 }
4138 }
4139 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4140 printk(MYIOC_s_WARN_FMT
4141 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4142 }
4143
4144 } else {
4145 /* Wait for FW to reload and for board
4146 * to go to the READY state.
4147 * Maximum wait is 60 seconds.
4148 * If fail, no error will check again
4149 * with calling program.
4150 */
4151 for (count = 0; count < 60; count ++) {
4152 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4153 doorbell &= MPI_IOC_STATE_MASK;
4154
4155 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4156 "looking for READY STATE: doorbell=%x"
4157 " count=%d\n", ioc->name, doorbell, count));
4158
4159 if (doorbell == MPI_IOC_STATE_READY) {
4160 break;
4161 }
4162
4163 /* wait 1 sec */
4164 if (sleepFlag == CAN_SLEEP) {
4165 msleep (1000);
4166 } else {
4167 mdelay (1000);
4168 }
4169 }
4170
4171 if (doorbell != MPI_IOC_STATE_READY)
4172 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4173 "after reset! IocState=%x", ioc->name,
4174 doorbell);
4175 }
4176 }
4177
4178 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4179 if (ioc->debug_level & MPT_DEBUG) {
4180 if (ioc->alt_ioc)
4181 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4182 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4183 ioc->name, diag0val, diag1val));
4184 }
4185
4186 /* Clear RESET_HISTORY bit! Place board in the
4187 * diagnostic mode to update the diag register.
4188 */
4189 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4190 count = 0;
4191 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4192 /* Write magic sequence to WriteSequence register
4193 * Loop until in diagnostic mode
4194 */
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4197 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4198 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4199 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4200 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4201
4202 /* wait 100 msec */
4203 if (sleepFlag == CAN_SLEEP) {
4204 msleep (100);
4205 } else {
4206 mdelay (100);
4207 }
4208
4209 count++;
4210 if (count > 20) {
4211 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4212 ioc->name, diag0val);
4213 break;
4214 }
4215 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4216 }
4217 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4218 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4220 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4221 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4222 ioc->name);
4223 }
4224
4225 /* Disable Diagnostic Mode
4226 */
4227 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4228
4229 /* Check FW reload status flags.
4230 */
4231 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4232 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4233 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4234 ioc->name, diag0val);
4235 return -3;
4236 }
4237
4238 if (ioc->debug_level & MPT_DEBUG) {
4239 if (ioc->alt_ioc)
4240 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4241 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4242 ioc->name, diag0val, diag1val));
4243 }
4244
4245 /*
4246 * Reset flag that says we've enabled event notification
4247 */
4248 ioc->facts.EventState = 0;
4249
4250 if (ioc->alt_ioc)
4251 ioc->alt_ioc->facts.EventState = 0;
4252
4253 return hard_reset_done;
4254}
4255
4256/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4257/**
4258 * SendIocReset - Send IOCReset request to MPT adapter.
4259 * @ioc: Pointer to MPT_ADAPTER structure
4260 * @reset_type: reset type, expected values are
4261 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4262 * @sleepFlag: Specifies whether the process can sleep
4263 *
4264 * Send IOCReset request to the MPT adapter.
4265 *
4266 * Returns 0 for success, non-zero for failure.
4267 */
4268static int
4269SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4270{
4271 int r;
4272 u32 state;
4273 int cntdn, count;
4274
4275 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4276 ioc->name, reset_type));
4277 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4278 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4279 return r;
4280
4281 /* FW ACK'd request, wait for READY state
4282 */
4283 count = 0;
4284 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4285
4286 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4287 cntdn--;
4288 count++;
4289 if (!cntdn) {
4290 if (sleepFlag != CAN_SLEEP)
4291 count *= 10;
4292
4293 printk(MYIOC_s_ERR_FMT
4294 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4295 ioc->name, state, (int)((count+5)/HZ));
4296 return -ETIME;
4297 }
4298
4299 if (sleepFlag == CAN_SLEEP) {
4300 msleep(1);
4301 } else {
4302 mdelay (1); /* 1 msec delay */
4303 }
4304 }
4305
4306 /* TODO!
4307 * Cleanup all event stuff for this IOC; re-issue EventNotification
4308 * request if needed.
4309 */
4310 if (ioc->facts.Function)
4311 ioc->facts.EventState = 0;
4312
4313 return 0;
4314}
4315
4316/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4317/**
4318 * initChainBuffers - Allocate memory for and initialize chain buffers
4319 * @ioc: Pointer to MPT_ADAPTER structure
4320 *
4321 * Allocates memory for and initializes chain buffers,
4322 * chain buffer control arrays and spinlock.
4323 */
4324static int
4325initChainBuffers(MPT_ADAPTER *ioc)
4326{
4327 u8 *mem;
4328 int sz, ii, num_chain;
4329 int scale, num_sge, numSGE;
4330
4331 /* ReqToChain size must equal the req_depth
4332 * index = req_idx
4333 */
4334 if (ioc->ReqToChain == NULL) {
4335 sz = ioc->req_depth * sizeof(int);
4336 mem = kmalloc(sz, GFP_ATOMIC);
4337 if (mem == NULL)
4338 return -1;
4339
4340 ioc->ReqToChain = (int *) mem;
4341 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4342 ioc->name, mem, sz));
4343 mem = kmalloc(sz, GFP_ATOMIC);
4344 if (mem == NULL)
4345 return -1;
4346
4347 ioc->RequestNB = (int *) mem;
4348 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4349 ioc->name, mem, sz));
4350 }
4351 for (ii = 0; ii < ioc->req_depth; ii++) {
4352 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4353 }
4354
4355 /* ChainToChain size must equal the total number
4356 * of chain buffers to be allocated.
4357 * index = chain_idx
4358 *
4359 * Calculate the number of chain buffers needed(plus 1) per I/O
4360 * then multiply the maximum number of simultaneous cmds
4361 *
4362 * num_sge = num sge in request frame + last chain buffer
4363 * scale = num sge per chain buffer if no chain element
4364 */
4365 scale = ioc->req_sz / ioc->SGE_size;
4366 if (ioc->sg_addr_size == sizeof(u64))
4367 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4368 else
4369 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4370
4371 if (ioc->sg_addr_size == sizeof(u64)) {
4372 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4373 (ioc->req_sz - 60) / ioc->SGE_size;
4374 } else {
4375 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4376 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4377 }
4378 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4379 ioc->name, num_sge, numSGE));
4380
4381 if (ioc->bus_type == FC) {
4382 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4383 numSGE = MPT_SCSI_FC_SG_DEPTH;
4384 } else {
4385 if (numSGE > MPT_SCSI_SG_DEPTH)
4386 numSGE = MPT_SCSI_SG_DEPTH;
4387 }
4388
4389 num_chain = 1;
4390 while (numSGE - num_sge > 0) {
4391 num_chain++;
4392 num_sge += (scale - 1);
4393 }
4394 num_chain++;
4395
4396 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4397 ioc->name, numSGE, num_sge, num_chain));
4398
4399 if (ioc->bus_type == SPI)
4400 num_chain *= MPT_SCSI_CAN_QUEUE;
4401 else if (ioc->bus_type == SAS)
4402 num_chain *= MPT_SAS_CAN_QUEUE;
4403 else
4404 num_chain *= MPT_FC_CAN_QUEUE;
4405
4406 ioc->num_chain = num_chain;
4407
4408 sz = num_chain * sizeof(int);
4409 if (ioc->ChainToChain == NULL) {
4410 mem = kmalloc(sz, GFP_ATOMIC);
4411 if (mem == NULL)
4412 return -1;
4413
4414 ioc->ChainToChain = (int *) mem;
4415 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4416 ioc->name, mem, sz));
4417 } else {
4418 mem = (u8 *) ioc->ChainToChain;
4419 }
4420 memset(mem, 0xFF, sz);
4421 return num_chain;
4422}
4423
4424/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4425/**
4426 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4427 * @ioc: Pointer to MPT_ADAPTER structure
4428 *
4429 * This routine allocates memory for the MPT reply and request frame
4430 * pools (if necessary), and primes the IOC reply FIFO with
4431 * reply frames.
4432 *
4433 * Returns 0 for success, non-zero for failure.
4434 */
4435static int
4436PrimeIocFifos(MPT_ADAPTER *ioc)
4437{
4438 MPT_FRAME_HDR *mf;
4439 unsigned long flags;
4440 dma_addr_t alloc_dma;
4441 u8 *mem;
4442 int i, reply_sz, sz, total_size, num_chain;
4443 u64 dma_mask;
4444
4445 dma_mask = 0;
4446
4447 /* Prime reply FIFO... */
4448
4449 if (ioc->reply_frames == NULL) {
4450 if ( (num_chain = initChainBuffers(ioc)) < 0)
4451 return -1;
4452 /*
4453 * 1078 errata workaround for the 36GB limitation
4454 */
4455 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4456 ioc->dma_mask > DMA_BIT_MASK(35)) {
4457 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4458 && !pci_set_consistent_dma_mask(ioc->pcidev,
4459 DMA_BIT_MASK(32))) {
4460 dma_mask = DMA_BIT_MASK(35);
4461 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4462 "setting 35 bit addressing for "
4463 "Request/Reply/Chain and Sense Buffers\n",
4464 ioc->name));
4465 } else {
4466 /*Reseting DMA mask to 64 bit*/
4467 pci_set_dma_mask(ioc->pcidev,
4468 DMA_BIT_MASK(64));
4469 pci_set_consistent_dma_mask(ioc->pcidev,
4470 DMA_BIT_MASK(64));
4471
4472 printk(MYIOC_s_ERR_FMT
4473 "failed setting 35 bit addressing for "
4474 "Request/Reply/Chain and Sense Buffers\n",
4475 ioc->name);
4476 return -1;
4477 }
4478 }
4479
4480 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4482 ioc->name, ioc->reply_sz, ioc->reply_depth));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4484 ioc->name, reply_sz, reply_sz));
4485
4486 sz = (ioc->req_sz * ioc->req_depth);
4487 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4488 ioc->name, ioc->req_sz, ioc->req_depth));
4489 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4490 ioc->name, sz, sz));
4491 total_size += sz;
4492
4493 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4494 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4495 ioc->name, ioc->req_sz, num_chain));
4496 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4497 ioc->name, sz, sz, num_chain));
4498
4499 total_size += sz;
4500 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4501 &alloc_dma, GFP_KERNEL);
4502 if (mem == NULL) {
4503 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4504 ioc->name);
4505 goto out_fail;
4506 }
4507
4508 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4509 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4510
4511 memset(mem, 0, total_size);
4512 ioc->alloc_total += total_size;
4513 ioc->alloc = mem;
4514 ioc->alloc_dma = alloc_dma;
4515 ioc->alloc_sz = total_size;
4516 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4517 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4518
4519 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4520 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4521
4522 alloc_dma += reply_sz;
4523 mem += reply_sz;
4524
4525 /* Request FIFO - WE manage this! */
4526
4527 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4528 ioc->req_frames_dma = alloc_dma;
4529
4530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4531 ioc->name, mem, (void *)(ulong)alloc_dma));
4532
4533 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4534
4535 for (i = 0; i < ioc->req_depth; i++) {
4536 alloc_dma += ioc->req_sz;
4537 mem += ioc->req_sz;
4538 }
4539
4540 ioc->ChainBuffer = mem;
4541 ioc->ChainBufferDMA = alloc_dma;
4542
4543 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4544 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4545
4546 /* Initialize the free chain Q.
4547 */
4548
4549 INIT_LIST_HEAD(&ioc->FreeChainQ);
4550
4551 /* Post the chain buffers to the FreeChainQ.
4552 */
4553 mem = (u8 *)ioc->ChainBuffer;
4554 for (i=0; i < num_chain; i++) {
4555 mf = (MPT_FRAME_HDR *) mem;
4556 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4557 mem += ioc->req_sz;
4558 }
4559
4560 /* Initialize Request frames linked list
4561 */
4562 alloc_dma = ioc->req_frames_dma;
4563 mem = (u8 *) ioc->req_frames;
4564
4565 spin_lock_irqsave(&ioc->FreeQlock, flags);
4566 INIT_LIST_HEAD(&ioc->FreeQ);
4567 for (i = 0; i < ioc->req_depth; i++) {
4568 mf = (MPT_FRAME_HDR *) mem;
4569
4570 /* Queue REQUESTs *internally*! */
4571 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4572
4573 mem += ioc->req_sz;
4574 }
4575 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4576
4577 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4578 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4579 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4580 if (ioc->sense_buf_pool == NULL) {
4581 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4582 ioc->name);
4583 goto out_fail;
4584 }
4585
4586 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4587 ioc->alloc_total += sz;
4588 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4589 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4590
4591 }
4592
4593 /* Post Reply frames to FIFO
4594 */
4595 alloc_dma = ioc->alloc_dma;
4596 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4597 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4598
4599 for (i = 0; i < ioc->reply_depth; i++) {
4600 /* Write each address to the IOC! */
4601 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4602 alloc_dma += ioc->reply_sz;
4603 }
4604
4605 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4606 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4607 ioc->dma_mask))
4608 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4609 "restoring 64 bit addressing\n", ioc->name));
4610
4611 return 0;
4612
4613out_fail:
4614
4615 if (ioc->alloc != NULL) {
4616 sz = ioc->alloc_sz;
4617 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4618 ioc->alloc_dma);
4619 ioc->reply_frames = NULL;
4620 ioc->req_frames = NULL;
4621 ioc->alloc_total -= sz;
4622 }
4623 if (ioc->sense_buf_pool != NULL) {
4624 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4625 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4626 ioc->sense_buf_pool_dma);
4627 ioc->sense_buf_pool = NULL;
4628 }
4629
4630 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4631 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4632 DMA_BIT_MASK(64)))
4633 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4634 "restoring 64 bit addressing\n", ioc->name));
4635
4636 return -1;
4637}
4638
4639/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4640/**
4641 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4642 * from IOC via doorbell handshake method.
4643 * @ioc: Pointer to MPT_ADAPTER structure
4644 * @reqBytes: Size of the request in bytes
4645 * @req: Pointer to MPT request frame
4646 * @replyBytes: Expected size of the reply in bytes
4647 * @u16reply: Pointer to area where reply should be written
4648 * @maxwait: Max wait time for a reply (in seconds)
4649 * @sleepFlag: Specifies whether the process can sleep
4650 *
4651 * NOTES: It is the callers responsibility to byte-swap fields in the
4652 * request which are greater than 1 byte in size. It is also the
4653 * callers responsibility to byte-swap response fields which are
4654 * greater than 1 byte in size.
4655 *
4656 * Returns 0 for success, non-zero for failure.
4657 */
4658static int
4659mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4660 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4661{
4662 MPIDefaultReply_t *mptReply;
4663 int failcnt = 0;
4664 int t;
4665
4666 /*
4667 * Get ready to cache a handshake reply
4668 */
4669 ioc->hs_reply_idx = 0;
4670 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4671 mptReply->MsgLength = 0;
4672
4673 /*
4674 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4675 * then tell IOC that we want to handshake a request of N words.
4676 * (WRITE u32val to Doorbell reg).
4677 */
4678 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4679 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4680 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4681 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4682
4683 /*
4684 * Wait for IOC's doorbell handshake int
4685 */
4686 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4687 failcnt++;
4688
4689 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4690 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4691
4692 /* Read doorbell and check for active bit */
4693 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4694 return -1;
4695
4696 /*
4697 * Clear doorbell int (WRITE 0 to IntStatus reg),
4698 * then wait for IOC to ACKnowledge that it's ready for
4699 * our handshake request.
4700 */
4701 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4702 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4703 failcnt++;
4704
4705 if (!failcnt) {
4706 int ii;
4707 u8 *req_as_bytes = (u8 *) req;
4708
4709 /*
4710 * Stuff request words via doorbell handshake,
4711 * with ACK from IOC for each.
4712 */
4713 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4714 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4715 (req_as_bytes[(ii*4) + 1] << 8) |
4716 (req_as_bytes[(ii*4) + 2] << 16) |
4717 (req_as_bytes[(ii*4) + 3] << 24));
4718
4719 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4720 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4721 failcnt++;
4722 }
4723
4724 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4725 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4726
4727 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4728 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4729
4730 /*
4731 * Wait for completion of doorbell handshake reply from the IOC
4732 */
4733 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4734 failcnt++;
4735
4736 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4737 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4738
4739 /*
4740 * Copy out the cached reply...
4741 */
4742 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4743 u16reply[ii] = ioc->hs_reply[ii];
4744 } else {
4745 return -99;
4746 }
4747
4748 return -failcnt;
4749}
4750
4751/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4752/**
4753 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4754 * @ioc: Pointer to MPT_ADAPTER structure
4755 * @howlong: How long to wait (in seconds)
4756 * @sleepFlag: Specifies whether the process can sleep
4757 *
4758 * This routine waits (up to ~2 seconds max) for IOC doorbell
4759 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4760 * bit in its IntStatus register being clear.
4761 *
4762 * Returns a negative value on failure, else wait loop count.
4763 */
4764static int
4765WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4766{
4767 int cntdn;
4768 int count = 0;
4769 u32 intstat=0;
4770
4771 cntdn = 1000 * howlong;
4772
4773 if (sleepFlag == CAN_SLEEP) {
4774 while (--cntdn) {
4775 msleep (1);
4776 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4777 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4778 break;
4779 count++;
4780 }
4781 } else {
4782 while (--cntdn) {
4783 udelay (1000);
4784 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4785 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4786 break;
4787 count++;
4788 }
4789 }
4790
4791 if (cntdn) {
4792 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4793 ioc->name, count));
4794 return count;
4795 }
4796
4797 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4798 ioc->name, count, intstat);
4799 return -1;
4800}
4801
4802/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4803/**
4804 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4805 * @ioc: Pointer to MPT_ADAPTER structure
4806 * @howlong: How long to wait (in seconds)
4807 * @sleepFlag: Specifies whether the process can sleep
4808 *
4809 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4810 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4811 *
4812 * Returns a negative value on failure, else wait loop count.
4813 */
4814static int
4815WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4816{
4817 int cntdn;
4818 int count = 0;
4819 u32 intstat=0;
4820
4821 cntdn = 1000 * howlong;
4822 if (sleepFlag == CAN_SLEEP) {
4823 while (--cntdn) {
4824 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4825 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4826 break;
4827 msleep(1);
4828 count++;
4829 }
4830 } else {
4831 while (--cntdn) {
4832 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4833 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4834 break;
4835 udelay (1000);
4836 count++;
4837 }
4838 }
4839
4840 if (cntdn) {
4841 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4842 ioc->name, count, howlong));
4843 return count;
4844 }
4845
4846 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4847 ioc->name, count, intstat);
4848 return -1;
4849}
4850
4851/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4852/**
4853 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4854 * @ioc: Pointer to MPT_ADAPTER structure
4855 * @howlong: How long to wait (in seconds)
4856 * @sleepFlag: Specifies whether the process can sleep
4857 *
4858 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4859 * Reply is cached to IOC private area large enough to hold a maximum
4860 * of 128 bytes of reply data.
4861 *
4862 * Returns a negative value on failure, else size of reply in WORDS.
4863 */
4864static int
4865WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4866{
4867 int u16cnt = 0;
4868 int failcnt = 0;
4869 int t;
4870 u16 *hs_reply = ioc->hs_reply;
4871 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4872 u16 hword;
4873
4874 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4875
4876 /*
4877 * Get first two u16's so we can look at IOC's intended reply MsgLength
4878 */
4879 u16cnt=0;
4880 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4881 failcnt++;
4882 } else {
4883 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4884 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4885 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4886 failcnt++;
4887 else {
4888 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4889 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4890 }
4891 }
4892
4893 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4894 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4895 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4896
4897 /*
4898 * If no error (and IOC said MsgLength is > 0), piece together
4899 * reply 16 bits at a time.
4900 */
4901 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4902 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4903 failcnt++;
4904 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4905 /* don't overflow our IOC hs_reply[] buffer! */
4906 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4907 hs_reply[u16cnt] = hword;
4908 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4909 }
4910
4911 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4912 failcnt++;
4913 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4914
4915 if (failcnt) {
4916 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4917 ioc->name);
4918 return -failcnt;
4919 }
4920#if 0
4921 else if (u16cnt != (2 * mptReply->MsgLength)) {
4922 return -101;
4923 }
4924 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4925 return -102;
4926 }
4927#endif
4928
4929 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4930 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4931
4932 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4933 ioc->name, t, u16cnt/2));
4934 return u16cnt/2;
4935}
4936
4937/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4938/**
4939 * GetLanConfigPages - Fetch LANConfig pages.
4940 * @ioc: Pointer to MPT_ADAPTER structure
4941 *
4942 * Return: 0 for success
4943 * -ENOMEM if no memory available
4944 * -EPERM if not allowed due to ISR context
4945 * -EAGAIN if no msg frames currently available
4946 * -EFAULT for non-successful reply or no reply (timeout)
4947 */
4948static int
4949GetLanConfigPages(MPT_ADAPTER *ioc)
4950{
4951 ConfigPageHeader_t hdr;
4952 CONFIGPARMS cfg;
4953 LANPage0_t *ppage0_alloc;
4954 dma_addr_t page0_dma;
4955 LANPage1_t *ppage1_alloc;
4956 dma_addr_t page1_dma;
4957 int rc = 0;
4958 int data_sz;
4959 int copy_sz;
4960
4961 /* Get LAN Page 0 header */
4962 hdr.PageVersion = 0;
4963 hdr.PageLength = 0;
4964 hdr.PageNumber = 0;
4965 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4966 cfg.cfghdr.hdr = &hdr;
4967 cfg.physAddr = -1;
4968 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4969 cfg.dir = 0;
4970 cfg.pageAddr = 0;
4971 cfg.timeout = 0;
4972
4973 if ((rc = mpt_config(ioc, &cfg)) != 0)
4974 return rc;
4975
4976 if (hdr.PageLength > 0) {
4977 data_sz = hdr.PageLength * 4;
4978 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4979 rc = -ENOMEM;
4980 if (ppage0_alloc) {
4981 memset((u8 *)ppage0_alloc, 0, data_sz);
4982 cfg.physAddr = page0_dma;
4983 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4984
4985 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4986 /* save the data */
4987 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4988 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4989
4990 }
4991
4992 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4993
4994 /* FIXME!
4995 * Normalize endianness of structure data,
4996 * by byte-swapping all > 1 byte fields!
4997 */
4998
4999 }
5000
5001 if (rc)
5002 return rc;
5003 }
5004
5005 /* Get LAN Page 1 header */
5006 hdr.PageVersion = 0;
5007 hdr.PageLength = 0;
5008 hdr.PageNumber = 1;
5009 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5010 cfg.cfghdr.hdr = &hdr;
5011 cfg.physAddr = -1;
5012 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5013 cfg.dir = 0;
5014 cfg.pageAddr = 0;
5015
5016 if ((rc = mpt_config(ioc, &cfg)) != 0)
5017 return rc;
5018
5019 if (hdr.PageLength == 0)
5020 return 0;
5021
5022 data_sz = hdr.PageLength * 4;
5023 rc = -ENOMEM;
5024 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5025 if (ppage1_alloc) {
5026 memset((u8 *)ppage1_alloc, 0, data_sz);
5027 cfg.physAddr = page1_dma;
5028 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5029
5030 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5031 /* save the data */
5032 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5033 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5034 }
5035
5036 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5037
5038 /* FIXME!
5039 * Normalize endianness of structure data,
5040 * by byte-swapping all > 1 byte fields!
5041 */
5042
5043 }
5044
5045 return rc;
5046}
5047
5048/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5049/**
5050 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5051 * @ioc: Pointer to MPT_ADAPTER structure
5052 * @persist_opcode: see below
5053 *
5054 * =============================== ======================================
5055 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5056 * devices not currently present.
5057 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5058 * =============================== ======================================
5059 *
5060 * NOTE: Don't use not this function during interrupt time.
5061 *
5062 * Returns 0 for success, non-zero error
5063 */
5064
5065/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5066int
5067mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5068{
5069 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5070 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5071 MPT_FRAME_HDR *mf = NULL;
5072 MPIHeader_t *mpi_hdr;
5073 int ret = 0;
5074 unsigned long timeleft;
5075
5076 mutex_lock(&ioc->mptbase_cmds.mutex);
5077
5078 /* init the internal cmd struct */
5079 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5080 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5081
5082 /* insure garbage is not sent to fw */
5083 switch(persist_opcode) {
5084
5085 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5086 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5087 break;
5088
5089 default:
5090 ret = -1;
5091 goto out;
5092 }
5093
5094 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5095 __func__, persist_opcode);
5096
5097 /* Get a MF for this command.
5098 */
5099 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5100 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5101 ret = -1;
5102 goto out;
5103 }
5104
5105 mpi_hdr = (MPIHeader_t *) mf;
5106 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5107 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5108 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5109 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5110 sasIoUnitCntrReq->Operation = persist_opcode;
5111
5112 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5113 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5114 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5115 ret = -ETIME;
5116 printk(KERN_DEBUG "%s: failed\n", __func__);
5117 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5118 goto out;
5119 if (!timeleft) {
5120 printk(MYIOC_s_WARN_FMT
5121 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5122 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5123 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5124 mpt_free_msg_frame(ioc, mf);
5125 }
5126 goto out;
5127 }
5128
5129 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5130 ret = -1;
5131 goto out;
5132 }
5133
5134 sasIoUnitCntrReply =
5135 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5136 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5137 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5138 __func__, sasIoUnitCntrReply->IOCStatus,
5139 sasIoUnitCntrReply->IOCLogInfo);
5140 printk(KERN_DEBUG "%s: failed\n", __func__);
5141 ret = -1;
5142 } else
5143 printk(KERN_DEBUG "%s: success\n", __func__);
5144 out:
5145
5146 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5147 mutex_unlock(&ioc->mptbase_cmds.mutex);
5148 return ret;
5149}
5150
5151/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5152
5153static void
5154mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5155 MpiEventDataRaid_t * pRaidEventData)
5156{
5157 int volume;
5158 int reason;
5159 int disk;
5160 int status;
5161 int flags;
5162 int state;
5163
5164 volume = pRaidEventData->VolumeID;
5165 reason = pRaidEventData->ReasonCode;
5166 disk = pRaidEventData->PhysDiskNum;
5167 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5168 flags = (status >> 0) & 0xff;
5169 state = (status >> 8) & 0xff;
5170
5171 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5172 return;
5173 }
5174
5175 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5176 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5177 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5178 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5179 ioc->name, disk, volume);
5180 } else {
5181 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5182 ioc->name, volume);
5183 }
5184
5185 switch(reason) {
5186 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5187 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5188 ioc->name);
5189 break;
5190
5191 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5192
5193 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5194 ioc->name);
5195 break;
5196
5197 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5198 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5199 ioc->name);
5200 break;
5201
5202 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5203 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5204 ioc->name,
5205 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5206 ? "optimal"
5207 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5208 ? "degraded"
5209 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5210 ? "failed"
5211 : "state unknown",
5212 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5213 ? ", enabled" : "",
5214 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5215 ? ", quiesced" : "",
5216 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5217 ? ", resync in progress" : "" );
5218 break;
5219
5220 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5221 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5222 ioc->name, disk);
5223 break;
5224
5225 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5226 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5227 ioc->name);
5228 break;
5229
5230 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5231 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5232 ioc->name);
5233 break;
5234
5235 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5236 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5237 ioc->name);
5238 break;
5239
5240 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5241 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5242 ioc->name,
5243 state == MPI_PHYSDISK0_STATUS_ONLINE
5244 ? "online"
5245 : state == MPI_PHYSDISK0_STATUS_MISSING
5246 ? "missing"
5247 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5248 ? "not compatible"
5249 : state == MPI_PHYSDISK0_STATUS_FAILED
5250 ? "failed"
5251 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5252 ? "initializing"
5253 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5254 ? "offline requested"
5255 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5256 ? "failed requested"
5257 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5258 ? "offline"
5259 : "state unknown",
5260 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5261 ? ", out of sync" : "",
5262 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5263 ? ", quiesced" : "" );
5264 break;
5265
5266 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5267 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5268 ioc->name, disk);
5269 break;
5270
5271 case MPI_EVENT_RAID_RC_SMART_DATA:
5272 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5273 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5274 break;
5275
5276 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5277 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5278 ioc->name, disk);
5279 break;
5280 }
5281}
5282
5283/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5284/**
5285 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5286 * @ioc: Pointer to MPT_ADAPTER structure
5287 *
5288 * Returns: 0 for success
5289 * -ENOMEM if no memory available
5290 * -EPERM if not allowed due to ISR context
5291 * -EAGAIN if no msg frames currently available
5292 * -EFAULT for non-successful reply or no reply (timeout)
5293 */
5294static int
5295GetIoUnitPage2(MPT_ADAPTER *ioc)
5296{
5297 ConfigPageHeader_t hdr;
5298 CONFIGPARMS cfg;
5299 IOUnitPage2_t *ppage_alloc;
5300 dma_addr_t page_dma;
5301 int data_sz;
5302 int rc;
5303
5304 /* Get the page header */
5305 hdr.PageVersion = 0;
5306 hdr.PageLength = 0;
5307 hdr.PageNumber = 2;
5308 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5309 cfg.cfghdr.hdr = &hdr;
5310 cfg.physAddr = -1;
5311 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5312 cfg.dir = 0;
5313 cfg.pageAddr = 0;
5314 cfg.timeout = 0;
5315
5316 if ((rc = mpt_config(ioc, &cfg)) != 0)
5317 return rc;
5318
5319 if (hdr.PageLength == 0)
5320 return 0;
5321
5322 /* Read the config page */
5323 data_sz = hdr.PageLength * 4;
5324 rc = -ENOMEM;
5325 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5326 if (ppage_alloc) {
5327 memset((u8 *)ppage_alloc, 0, data_sz);
5328 cfg.physAddr = page_dma;
5329 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5330
5331 /* If Good, save data */
5332 if ((rc = mpt_config(ioc, &cfg)) == 0)
5333 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5334
5335 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5336 }
5337
5338 return rc;
5339}
5340
5341/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5342/**
5343 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5344 * @ioc: Pointer to a Adapter Strucutre
5345 * @portnum: IOC port number
5346 *
5347 * Return: -EFAULT if read of config page header fails
5348 * or if no nvram
5349 * If read of SCSI Port Page 0 fails,
5350 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5351 * Adapter settings: async, narrow
5352 * Return 1
5353 * If read of SCSI Port Page 2 fails,
5354 * Adapter settings valid
5355 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5356 * Return 1
5357 * Else
5358 * Both valid
5359 * Return 0
5360 * CHECK - what type of locking mechanisms should be used????
5361 */
5362static int
5363mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5364{
5365 u8 *pbuf;
5366 dma_addr_t buf_dma;
5367 CONFIGPARMS cfg;
5368 ConfigPageHeader_t header;
5369 int ii;
5370 int data, rc = 0;
5371
5372 /* Allocate memory
5373 */
5374 if (!ioc->spi_data.nvram) {
5375 int sz;
5376 u8 *mem;
5377 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5378 mem = kmalloc(sz, GFP_ATOMIC);
5379 if (mem == NULL)
5380 return -EFAULT;
5381
5382 ioc->spi_data.nvram = (int *) mem;
5383
5384 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5385 ioc->name, ioc->spi_data.nvram, sz));
5386 }
5387
5388 /* Invalidate NVRAM information
5389 */
5390 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5391 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5392 }
5393
5394 /* Read SPP0 header, allocate memory, then read page.
5395 */
5396 header.PageVersion = 0;
5397 header.PageLength = 0;
5398 header.PageNumber = 0;
5399 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5400 cfg.cfghdr.hdr = &header;
5401 cfg.physAddr = -1;
5402 cfg.pageAddr = portnum;
5403 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5404 cfg.dir = 0;
5405 cfg.timeout = 0; /* use default */
5406 if (mpt_config(ioc, &cfg) != 0)
5407 return -EFAULT;
5408
5409 if (header.PageLength > 0) {
5410 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5411 if (pbuf) {
5412 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5413 cfg.physAddr = buf_dma;
5414 if (mpt_config(ioc, &cfg) != 0) {
5415 ioc->spi_data.maxBusWidth = MPT_NARROW;
5416 ioc->spi_data.maxSyncOffset = 0;
5417 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5418 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5419 rc = 1;
5420 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5421 "Unable to read PortPage0 minSyncFactor=%x\n",
5422 ioc->name, ioc->spi_data.minSyncFactor));
5423 } else {
5424 /* Save the Port Page 0 data
5425 */
5426 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5427 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5428 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5429
5430 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5431 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5432 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5433 "noQas due to Capabilities=%x\n",
5434 ioc->name, pPP0->Capabilities));
5435 }
5436 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5437 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5438 if (data) {
5439 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5440 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5441 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5442 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5443 "PortPage0 minSyncFactor=%x\n",
5444 ioc->name, ioc->spi_data.minSyncFactor));
5445 } else {
5446 ioc->spi_data.maxSyncOffset = 0;
5447 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5448 }
5449
5450 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5451
5452 /* Update the minSyncFactor based on bus type.
5453 */
5454 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5455 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5456
5457 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5458 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5459 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5460 "HVD or SE detected, minSyncFactor=%x\n",
5461 ioc->name, ioc->spi_data.minSyncFactor));
5462 }
5463 }
5464 }
5465 if (pbuf) {
5466 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5467 }
5468 }
5469 }
5470
5471 /* SCSI Port Page 2 - Read the header then the page.
5472 */
5473 header.PageVersion = 0;
5474 header.PageLength = 0;
5475 header.PageNumber = 2;
5476 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5477 cfg.cfghdr.hdr = &header;
5478 cfg.physAddr = -1;
5479 cfg.pageAddr = portnum;
5480 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5481 cfg.dir = 0;
5482 if (mpt_config(ioc, &cfg) != 0)
5483 return -EFAULT;
5484
5485 if (header.PageLength > 0) {
5486 /* Allocate memory and read SCSI Port Page 2
5487 */
5488 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5489 if (pbuf) {
5490 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5491 cfg.physAddr = buf_dma;
5492 if (mpt_config(ioc, &cfg) != 0) {
5493 /* Nvram data is left with INVALID mark
5494 */
5495 rc = 1;
5496 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5497
5498 /* This is an ATTO adapter, read Page2 accordingly
5499 */
5500 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5501 ATTODeviceInfo_t *pdevice = NULL;
5502 u16 ATTOFlags;
5503
5504 /* Save the Port Page 2 data
5505 * (reformat into a 32bit quantity)
5506 */
5507 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5508 pdevice = &pPP2->DeviceSettings[ii];
5509 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5510 data = 0;
5511
5512 /* Translate ATTO device flags to LSI format
5513 */
5514 if (ATTOFlags & ATTOFLAG_DISC)
5515 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5516 if (ATTOFlags & ATTOFLAG_ID_ENB)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5520 if (ATTOFlags & ATTOFLAG_TAGGED)
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5522 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5524
5525 data = (data << 16) | (pdevice->Period << 8) | 10;
5526 ioc->spi_data.nvram[ii] = data;
5527 }
5528 } else {
5529 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5530 MpiDeviceInfo_t *pdevice = NULL;
5531
5532 /*
5533 * Save "Set to Avoid SCSI Bus Resets" flag
5534 */
5535 ioc->spi_data.bus_reset =
5536 (le32_to_cpu(pPP2->PortFlags) &
5537 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5538 0 : 1 ;
5539
5540 /* Save the Port Page 2 data
5541 * (reformat into a 32bit quantity)
5542 */
5543 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5544 ioc->spi_data.PortFlags = data;
5545 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5546 pdevice = &pPP2->DeviceSettings[ii];
5547 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5548 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5549 ioc->spi_data.nvram[ii] = data;
5550 }
5551 }
5552
5553 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5554 }
5555 }
5556
5557 /* Update Adapter limits with those from NVRAM
5558 * Comment: Don't need to do this. Target performance
5559 * parameters will never exceed the adapters limits.
5560 */
5561
5562 return rc;
5563}
5564
5565/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5566/**
5567 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5568 * @ioc: Pointer to a Adapter Strucutre
5569 * @portnum: IOC port number
5570 *
5571 * Return: -EFAULT if read of config page header fails
5572 * or 0 if success.
5573 */
5574static int
5575mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5576{
5577 CONFIGPARMS cfg;
5578 ConfigPageHeader_t header;
5579
5580 /* Read the SCSI Device Page 1 header
5581 */
5582 header.PageVersion = 0;
5583 header.PageLength = 0;
5584 header.PageNumber = 1;
5585 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5586 cfg.cfghdr.hdr = &header;
5587 cfg.physAddr = -1;
5588 cfg.pageAddr = portnum;
5589 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5590 cfg.dir = 0;
5591 cfg.timeout = 0;
5592 if (mpt_config(ioc, &cfg) != 0)
5593 return -EFAULT;
5594
5595 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5596 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5597
5598 header.PageVersion = 0;
5599 header.PageLength = 0;
5600 header.PageNumber = 0;
5601 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5602 if (mpt_config(ioc, &cfg) != 0)
5603 return -EFAULT;
5604
5605 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5606 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5607
5608 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5609 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5610
5611 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5612 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5613 return 0;
5614}
5615
5616/**
5617 * mpt_inactive_raid_list_free - This clears this link list.
5618 * @ioc : pointer to per adapter structure
5619 **/
5620static void
5621mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5622{
5623 struct inactive_raid_component_info *component_info, *pNext;
5624
5625 if (list_empty(&ioc->raid_data.inactive_list))
5626 return;
5627
5628 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5629 list_for_each_entry_safe(component_info, pNext,
5630 &ioc->raid_data.inactive_list, list) {
5631 list_del(&component_info->list);
5632 kfree(component_info);
5633 }
5634 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5635}
5636
5637/**
5638 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5639 *
5640 * @ioc : pointer to per adapter structure
5641 * @channel : volume channel
5642 * @id : volume target id
5643 **/
5644static void
5645mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5646{
5647 CONFIGPARMS cfg;
5648 ConfigPageHeader_t hdr;
5649 dma_addr_t dma_handle;
5650 pRaidVolumePage0_t buffer = NULL;
5651 int i;
5652 RaidPhysDiskPage0_t phys_disk;
5653 struct inactive_raid_component_info *component_info;
5654 int handle_inactive_volumes;
5655
5656 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5657 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5658 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5659 cfg.pageAddr = (channel << 8) + id;
5660 cfg.cfghdr.hdr = &hdr;
5661 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5662
5663 if (mpt_config(ioc, &cfg) != 0)
5664 goto out;
5665
5666 if (!hdr.PageLength)
5667 goto out;
5668
5669 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5670 &dma_handle);
5671
5672 if (!buffer)
5673 goto out;
5674
5675 cfg.physAddr = dma_handle;
5676 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5677
5678 if (mpt_config(ioc, &cfg) != 0)
5679 goto out;
5680
5681 if (!buffer->NumPhysDisks)
5682 goto out;
5683
5684 handle_inactive_volumes =
5685 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5686 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5687 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5688 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5689
5690 if (!handle_inactive_volumes)
5691 goto out;
5692
5693 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5694 for (i = 0; i < buffer->NumPhysDisks; i++) {
5695 if(mpt_raid_phys_disk_pg0(ioc,
5696 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5697 continue;
5698
5699 if ((component_info = kmalloc(sizeof (*component_info),
5700 GFP_KERNEL)) == NULL)
5701 continue;
5702
5703 component_info->volumeID = id;
5704 component_info->volumeBus = channel;
5705 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5706 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5707 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5708 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5709
5710 list_add_tail(&component_info->list,
5711 &ioc->raid_data.inactive_list);
5712 }
5713 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5714
5715 out:
5716 if (buffer)
5717 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5718 dma_handle);
5719}
5720
5721/**
5722 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5723 * @ioc: Pointer to a Adapter Structure
5724 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5725 * @phys_disk: requested payload data returned
5726 *
5727 * Return:
5728 * 0 on success
5729 * -EFAULT if read of config page header fails or data pointer not NULL
5730 * -ENOMEM if pci_alloc failed
5731 **/
5732int
5733mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5734 RaidPhysDiskPage0_t *phys_disk)
5735{
5736 CONFIGPARMS cfg;
5737 ConfigPageHeader_t hdr;
5738 dma_addr_t dma_handle;
5739 pRaidPhysDiskPage0_t buffer = NULL;
5740 int rc;
5741
5742 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5743 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5744 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5745
5746 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5747 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5748 cfg.cfghdr.hdr = &hdr;
5749 cfg.physAddr = -1;
5750 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5751
5752 if (mpt_config(ioc, &cfg) != 0) {
5753 rc = -EFAULT;
5754 goto out;
5755 }
5756
5757 if (!hdr.PageLength) {
5758 rc = -EFAULT;
5759 goto out;
5760 }
5761
5762 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5763 &dma_handle);
5764
5765 if (!buffer) {
5766 rc = -ENOMEM;
5767 goto out;
5768 }
5769
5770 cfg.physAddr = dma_handle;
5771 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5772 cfg.pageAddr = phys_disk_num;
5773
5774 if (mpt_config(ioc, &cfg) != 0) {
5775 rc = -EFAULT;
5776 goto out;
5777 }
5778
5779 rc = 0;
5780 memcpy(phys_disk, buffer, sizeof(*buffer));
5781 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5782
5783 out:
5784
5785 if (buffer)
5786 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5787 dma_handle);
5788
5789 return rc;
5790}
5791
5792/**
5793 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5794 * @ioc: Pointer to a Adapter Structure
5795 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5796 *
5797 * Return:
5798 * returns number paths
5799 **/
5800int
5801mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5802{
5803 CONFIGPARMS cfg;
5804 ConfigPageHeader_t hdr;
5805 dma_addr_t dma_handle;
5806 pRaidPhysDiskPage1_t buffer = NULL;
5807 int rc;
5808
5809 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5810 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5811
5812 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5813 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5814 hdr.PageNumber = 1;
5815 cfg.cfghdr.hdr = &hdr;
5816 cfg.physAddr = -1;
5817 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5818
5819 if (mpt_config(ioc, &cfg) != 0) {
5820 rc = 0;
5821 goto out;
5822 }
5823
5824 if (!hdr.PageLength) {
5825 rc = 0;
5826 goto out;
5827 }
5828
5829 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5830 &dma_handle);
5831
5832 if (!buffer) {
5833 rc = 0;
5834 goto out;
5835 }
5836
5837 cfg.physAddr = dma_handle;
5838 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5839 cfg.pageAddr = phys_disk_num;
5840
5841 if (mpt_config(ioc, &cfg) != 0) {
5842 rc = 0;
5843 goto out;
5844 }
5845
5846 rc = buffer->NumPhysDiskPaths;
5847 out:
5848
5849 if (buffer)
5850 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5851 dma_handle);
5852
5853 return rc;
5854}
5855EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5856
5857/**
5858 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5859 * @ioc: Pointer to a Adapter Structure
5860 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5861 * @phys_disk: requested payload data returned
5862 *
5863 * Return:
5864 * 0 on success
5865 * -EFAULT if read of config page header fails or data pointer not NULL
5866 * -ENOMEM if pci_alloc failed
5867 **/
5868int
5869mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5870 RaidPhysDiskPage1_t *phys_disk)
5871{
5872 CONFIGPARMS cfg;
5873 ConfigPageHeader_t hdr;
5874 dma_addr_t dma_handle;
5875 pRaidPhysDiskPage1_t buffer = NULL;
5876 int rc;
5877 int i;
5878 __le64 sas_address;
5879
5880 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5881 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5882 rc = 0;
5883
5884 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5885 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5886 hdr.PageNumber = 1;
5887 cfg.cfghdr.hdr = &hdr;
5888 cfg.physAddr = -1;
5889 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5890
5891 if (mpt_config(ioc, &cfg) != 0) {
5892 rc = -EFAULT;
5893 goto out;
5894 }
5895
5896 if (!hdr.PageLength) {
5897 rc = -EFAULT;
5898 goto out;
5899 }
5900
5901 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5902 &dma_handle);
5903
5904 if (!buffer) {
5905 rc = -ENOMEM;
5906 goto out;
5907 }
5908
5909 cfg.physAddr = dma_handle;
5910 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5911 cfg.pageAddr = phys_disk_num;
5912
5913 if (mpt_config(ioc, &cfg) != 0) {
5914 rc = -EFAULT;
5915 goto out;
5916 }
5917
5918 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5919 phys_disk->PhysDiskNum = phys_disk_num;
5920 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5921 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5922 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5923 phys_disk->Path[i].OwnerIdentifier =
5924 buffer->Path[i].OwnerIdentifier;
5925 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5926 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5927 sas_address = le64_to_cpu(sas_address);
5928 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5929 memcpy(&sas_address,
5930 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5931 sas_address = le64_to_cpu(sas_address);
5932 memcpy(&phys_disk->Path[i].OwnerWWID,
5933 &sas_address, sizeof(__le64));
5934 }
5935
5936 out:
5937
5938 if (buffer)
5939 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5940 dma_handle);
5941
5942 return rc;
5943}
5944EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5945
5946
5947/**
5948 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5949 * @ioc: Pointer to a Adapter Strucutre
5950 *
5951 * Return:
5952 * 0 on success
5953 * -EFAULT if read of config page header fails or data pointer not NULL
5954 * -ENOMEM if pci_alloc failed
5955 **/
5956int
5957mpt_findImVolumes(MPT_ADAPTER *ioc)
5958{
5959 IOCPage2_t *pIoc2;
5960 u8 *mem;
5961 dma_addr_t ioc2_dma;
5962 CONFIGPARMS cfg;
5963 ConfigPageHeader_t header;
5964 int rc = 0;
5965 int iocpage2sz;
5966 int i;
5967
5968 if (!ioc->ir_firmware)
5969 return 0;
5970
5971 /* Free the old page
5972 */
5973 kfree(ioc->raid_data.pIocPg2);
5974 ioc->raid_data.pIocPg2 = NULL;
5975 mpt_inactive_raid_list_free(ioc);
5976
5977 /* Read IOCP2 header then the page.
5978 */
5979 header.PageVersion = 0;
5980 header.PageLength = 0;
5981 header.PageNumber = 2;
5982 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5983 cfg.cfghdr.hdr = &header;
5984 cfg.physAddr = -1;
5985 cfg.pageAddr = 0;
5986 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5987 cfg.dir = 0;
5988 cfg.timeout = 0;
5989 if (mpt_config(ioc, &cfg) != 0)
5990 return -EFAULT;
5991
5992 if (header.PageLength == 0)
5993 return -EFAULT;
5994
5995 iocpage2sz = header.PageLength * 4;
5996 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5997 if (!pIoc2)
5998 return -ENOMEM;
5999
6000 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6001 cfg.physAddr = ioc2_dma;
6002 if (mpt_config(ioc, &cfg) != 0)
6003 goto out;
6004
6005 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6006 if (!mem) {
6007 rc = -ENOMEM;
6008 goto out;
6009 }
6010
6011 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6012
6013 mpt_read_ioc_pg_3(ioc);
6014
6015 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6016 mpt_inactive_raid_volumes(ioc,
6017 pIoc2->RaidVolume[i].VolumeBus,
6018 pIoc2->RaidVolume[i].VolumeID);
6019
6020 out:
6021 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6022
6023 return rc;
6024}
6025
6026static int
6027mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6028{
6029 IOCPage3_t *pIoc3;
6030 u8 *mem;
6031 CONFIGPARMS cfg;
6032 ConfigPageHeader_t header;
6033 dma_addr_t ioc3_dma;
6034 int iocpage3sz = 0;
6035
6036 /* Free the old page
6037 */
6038 kfree(ioc->raid_data.pIocPg3);
6039 ioc->raid_data.pIocPg3 = NULL;
6040
6041 /* There is at least one physical disk.
6042 * Read and save IOC Page 3
6043 */
6044 header.PageVersion = 0;
6045 header.PageLength = 0;
6046 header.PageNumber = 3;
6047 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6048 cfg.cfghdr.hdr = &header;
6049 cfg.physAddr = -1;
6050 cfg.pageAddr = 0;
6051 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6052 cfg.dir = 0;
6053 cfg.timeout = 0;
6054 if (mpt_config(ioc, &cfg) != 0)
6055 return 0;
6056
6057 if (header.PageLength == 0)
6058 return 0;
6059
6060 /* Read Header good, alloc memory
6061 */
6062 iocpage3sz = header.PageLength * 4;
6063 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6064 if (!pIoc3)
6065 return 0;
6066
6067 /* Read the Page and save the data
6068 * into malloc'd memory.
6069 */
6070 cfg.physAddr = ioc3_dma;
6071 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6072 if (mpt_config(ioc, &cfg) == 0) {
6073 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6074 if (mem) {
6075 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6076 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6077 }
6078 }
6079
6080 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6081
6082 return 0;
6083}
6084
6085static void
6086mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6087{
6088 IOCPage4_t *pIoc4;
6089 CONFIGPARMS cfg;
6090 ConfigPageHeader_t header;
6091 dma_addr_t ioc4_dma;
6092 int iocpage4sz;
6093
6094 /* Read and save IOC Page 4
6095 */
6096 header.PageVersion = 0;
6097 header.PageLength = 0;
6098 header.PageNumber = 4;
6099 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6100 cfg.cfghdr.hdr = &header;
6101 cfg.physAddr = -1;
6102 cfg.pageAddr = 0;
6103 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6104 cfg.dir = 0;
6105 cfg.timeout = 0;
6106 if (mpt_config(ioc, &cfg) != 0)
6107 return;
6108
6109 if (header.PageLength == 0)
6110 return;
6111
6112 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6113 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6114 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6115 if (!pIoc4)
6116 return;
6117 ioc->alloc_total += iocpage4sz;
6118 } else {
6119 ioc4_dma = ioc->spi_data.IocPg4_dma;
6120 iocpage4sz = ioc->spi_data.IocPg4Sz;
6121 }
6122
6123 /* Read the Page into dma memory.
6124 */
6125 cfg.physAddr = ioc4_dma;
6126 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6127 if (mpt_config(ioc, &cfg) == 0) {
6128 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6129 ioc->spi_data.IocPg4_dma = ioc4_dma;
6130 ioc->spi_data.IocPg4Sz = iocpage4sz;
6131 } else {
6132 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6133 ioc->spi_data.pIocPg4 = NULL;
6134 ioc->alloc_total -= iocpage4sz;
6135 }
6136}
6137
6138static void
6139mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6140{
6141 IOCPage1_t *pIoc1;
6142 CONFIGPARMS cfg;
6143 ConfigPageHeader_t header;
6144 dma_addr_t ioc1_dma;
6145 int iocpage1sz = 0;
6146 u32 tmp;
6147
6148 /* Check the Coalescing Timeout in IOC Page 1
6149 */
6150 header.PageVersion = 0;
6151 header.PageLength = 0;
6152 header.PageNumber = 1;
6153 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6154 cfg.cfghdr.hdr = &header;
6155 cfg.physAddr = -1;
6156 cfg.pageAddr = 0;
6157 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6158 cfg.dir = 0;
6159 cfg.timeout = 0;
6160 if (mpt_config(ioc, &cfg) != 0)
6161 return;
6162
6163 if (header.PageLength == 0)
6164 return;
6165
6166 /* Read Header good, alloc memory
6167 */
6168 iocpage1sz = header.PageLength * 4;
6169 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6170 if (!pIoc1)
6171 return;
6172
6173 /* Read the Page and check coalescing timeout
6174 */
6175 cfg.physAddr = ioc1_dma;
6176 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6177 if (mpt_config(ioc, &cfg) == 0) {
6178
6179 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6180 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6181 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6182
6183 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6184 ioc->name, tmp));
6185
6186 if (tmp > MPT_COALESCING_TIMEOUT) {
6187 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6188
6189 /* Write NVRAM and current
6190 */
6191 cfg.dir = 1;
6192 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6193 if (mpt_config(ioc, &cfg) == 0) {
6194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6195 ioc->name, MPT_COALESCING_TIMEOUT));
6196
6197 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6198 if (mpt_config(ioc, &cfg) == 0) {
6199 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6200 "Reset NVRAM Coalescing Timeout to = %d\n",
6201 ioc->name, MPT_COALESCING_TIMEOUT));
6202 } else {
6203 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6204 "Reset NVRAM Coalescing Timeout Failed\n",
6205 ioc->name));
6206 }
6207
6208 } else {
6209 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6210 "Reset of Current Coalescing Timeout Failed!\n",
6211 ioc->name));
6212 }
6213 }
6214
6215 } else {
6216 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6217 }
6218 }
6219
6220 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6221
6222 return;
6223}
6224
6225static void
6226mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6227{
6228 CONFIGPARMS cfg;
6229 ConfigPageHeader_t hdr;
6230 dma_addr_t buf_dma;
6231 ManufacturingPage0_t *pbuf = NULL;
6232
6233 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6234 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6235
6236 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6237 cfg.cfghdr.hdr = &hdr;
6238 cfg.physAddr = -1;
6239 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6240 cfg.timeout = 10;
6241
6242 if (mpt_config(ioc, &cfg) != 0)
6243 goto out;
6244
6245 if (!cfg.cfghdr.hdr->PageLength)
6246 goto out;
6247
6248 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6249 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6250 if (!pbuf)
6251 goto out;
6252
6253 cfg.physAddr = buf_dma;
6254
6255 if (mpt_config(ioc, &cfg) != 0)
6256 goto out;
6257
6258 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6259 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6260 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6261
6262out:
6263
6264 if (pbuf)
6265 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6266}
6267
6268/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6269/**
6270 * SendEventNotification - Send EventNotification (on or off) request to adapter
6271 * @ioc: Pointer to MPT_ADAPTER structure
6272 * @EvSwitch: Event switch flags
6273 * @sleepFlag: Specifies whether the process can sleep
6274 */
6275static int
6276SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6277{
6278 EventNotification_t evn;
6279 MPIDefaultReply_t reply_buf;
6280
6281 memset(&evn, 0, sizeof(EventNotification_t));
6282 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6283
6284 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6285 evn.Switch = EvSwitch;
6286 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6287
6288 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6289 "Sending EventNotification (%d) request %p\n",
6290 ioc->name, EvSwitch, &evn));
6291
6292 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6293 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6294 sleepFlag);
6295}
6296
6297/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6298/**
6299 * SendEventAck - Send EventAck request to MPT adapter.
6300 * @ioc: Pointer to MPT_ADAPTER structure
6301 * @evnp: Pointer to original EventNotification request
6302 */
6303static int
6304SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6305{
6306 EventAck_t *pAck;
6307
6308 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6309 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6310 ioc->name, __func__));
6311 return -1;
6312 }
6313
6314 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6315
6316 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6317 pAck->ChainOffset = 0;
6318 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6319 pAck->MsgFlags = 0;
6320 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6321 pAck->Event = evnp->Event;
6322 pAck->EventContext = evnp->EventContext;
6323
6324 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6325
6326 return 0;
6327}
6328
6329/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6330/**
6331 * mpt_config - Generic function to issue config message
6332 * @ioc: Pointer to an adapter structure
6333 * @pCfg: Pointer to a configuration structure. Struct contains
6334 * action, page address, direction, physical address
6335 * and pointer to a configuration page header
6336 * Page header is updated.
6337 *
6338 * Returns 0 for success
6339 * -EPERM if not allowed due to ISR context
6340 * -EAGAIN if no msg frames currently available
6341 * -EFAULT for non-successful reply or no reply (timeout)
6342 */
6343int
6344mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6345{
6346 Config_t *pReq;
6347 ConfigReply_t *pReply;
6348 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6349 MPT_FRAME_HDR *mf;
6350 int ii;
6351 int flagsLength;
6352 long timeout;
6353 int ret;
6354 u8 page_type = 0, extend_page;
6355 unsigned long timeleft;
6356 unsigned long flags;
6357 int in_isr;
6358 u8 issue_hard_reset = 0;
6359 u8 retry_count = 0;
6360
6361 /* Prevent calling wait_event() (below), if caller happens
6362 * to be in ISR context, because that is fatal!
6363 */
6364 in_isr = in_interrupt();
6365 if (in_isr) {
6366 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6367 ioc->name));
6368 return -EPERM;
6369 }
6370
6371 /* don't send a config page during diag reset */
6372 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6373 if (ioc->ioc_reset_in_progress) {
6374 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6375 "%s: busy with host reset\n", ioc->name, __func__));
6376 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6377 return -EBUSY;
6378 }
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380
6381 /* don't send if no chance of success */
6382 if (!ioc->active ||
6383 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6384 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6385 "%s: ioc not operational, %d, %xh\n",
6386 ioc->name, __func__, ioc->active,
6387 mpt_GetIocState(ioc, 0)));
6388 return -EFAULT;
6389 }
6390
6391 retry_config:
6392 mutex_lock(&ioc->mptbase_cmds.mutex);
6393 /* init the internal cmd struct */
6394 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6395 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6396
6397 /* Get and Populate a free Frame
6398 */
6399 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6400 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6401 "mpt_config: no msg frames!\n", ioc->name));
6402 ret = -EAGAIN;
6403 goto out;
6404 }
6405
6406 pReq = (Config_t *)mf;
6407 pReq->Action = pCfg->action;
6408 pReq->Reserved = 0;
6409 pReq->ChainOffset = 0;
6410 pReq->Function = MPI_FUNCTION_CONFIG;
6411
6412 /* Assume page type is not extended and clear "reserved" fields. */
6413 pReq->ExtPageLength = 0;
6414 pReq->ExtPageType = 0;
6415 pReq->MsgFlags = 0;
6416
6417 for (ii=0; ii < 8; ii++)
6418 pReq->Reserved2[ii] = 0;
6419
6420 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6421 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6422 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6423 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6424
6425 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6426 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6427 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6428 pReq->ExtPageType = pExtHdr->ExtPageType;
6429 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6430
6431 /* Page Length must be treated as a reserved field for the
6432 * extended header.
6433 */
6434 pReq->Header.PageLength = 0;
6435 }
6436
6437 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6438
6439 /* Add a SGE to the config request.
6440 */
6441 if (pCfg->dir)
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6443 else
6444 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6445
6446 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6447 MPI_CONFIG_PAGETYPE_EXTENDED) {
6448 flagsLength |= pExtHdr->ExtPageLength * 4;
6449 page_type = pReq->ExtPageType;
6450 extend_page = 1;
6451 } else {
6452 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6453 page_type = pReq->Header.PageType;
6454 extend_page = 0;
6455 }
6456
6457 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6458 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6459 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6460
6461 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6462 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6463 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6464 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6465 timeout);
6466 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6467 ret = -ETIME;
6468 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6469 "Failed Sending Config request type 0x%x, page 0x%x,"
6470 " action %d, status %xh, time left %ld\n\n",
6471 ioc->name, page_type, pReq->Header.PageNumber,
6472 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6473 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6474 goto out;
6475 if (!timeleft) {
6476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6477 if (ioc->ioc_reset_in_progress) {
6478 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6479 flags);
6480 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6481 " progress mpt_config timed out.!!\n",
6482 __func__, ioc->name);
6483 mutex_unlock(&ioc->mptbase_cmds.mutex);
6484 return -EFAULT;
6485 }
6486 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6487 issue_hard_reset = 1;
6488 }
6489 goto out;
6490 }
6491
6492 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6493 ret = -1;
6494 goto out;
6495 }
6496 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6497 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6498 if (ret == MPI_IOCSTATUS_SUCCESS) {
6499 if (extend_page) {
6500 pCfg->cfghdr.ehdr->ExtPageLength =
6501 le16_to_cpu(pReply->ExtPageLength);
6502 pCfg->cfghdr.ehdr->ExtPageType =
6503 pReply->ExtPageType;
6504 }
6505 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6506 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6507 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6508 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6509
6510 }
6511
6512 if (retry_count)
6513 printk(MYIOC_s_INFO_FMT "Retry completed "
6514 "ret=0x%x timeleft=%ld\n",
6515 ioc->name, ret, timeleft);
6516
6517 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6518 ret, le32_to_cpu(pReply->IOCLogInfo)));
6519
6520out:
6521
6522 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6523 mutex_unlock(&ioc->mptbase_cmds.mutex);
6524 if (issue_hard_reset) {
6525 issue_hard_reset = 0;
6526 printk(MYIOC_s_WARN_FMT
6527 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6528 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6529 if (retry_count == 0) {
6530 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6531 retry_count++;
6532 } else
6533 mpt_HardResetHandler(ioc, CAN_SLEEP);
6534
6535 mpt_free_msg_frame(ioc, mf);
6536 /* attempt one retry for a timed out command */
6537 if (retry_count < 2) {
6538 printk(MYIOC_s_INFO_FMT
6539 "Attempting Retry Config request"
6540 " type 0x%x, page 0x%x,"
6541 " action %d\n", ioc->name, page_type,
6542 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6543 retry_count++;
6544 goto retry_config;
6545 }
6546 }
6547 return ret;
6548
6549}
6550
6551/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6552/**
6553 * mpt_ioc_reset - Base cleanup for hard reset
6554 * @ioc: Pointer to the adapter structure
6555 * @reset_phase: Indicates pre- or post-reset functionality
6556 *
6557 * Remark: Frees resources with internally generated commands.
6558 */
6559static int
6560mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6561{
6562 switch (reset_phase) {
6563 case MPT_IOC_SETUP_RESET:
6564 ioc->taskmgmt_quiesce_io = 1;
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_PRE_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6571 break;
6572 case MPT_IOC_POST_RESET:
6573 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6574 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6575/* wake up mptbase_cmds */
6576 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577 ioc->mptbase_cmds.status |=
6578 MPT_MGMT_STATUS_DID_IOCRESET;
6579 complete(&ioc->mptbase_cmds.done);
6580 }
6581/* wake up taskmgmt_cmds */
6582 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6583 ioc->taskmgmt_cmds.status |=
6584 MPT_MGMT_STATUS_DID_IOCRESET;
6585 complete(&ioc->taskmgmt_cmds.done);
6586 }
6587 break;
6588 default:
6589 break;
6590 }
6591
6592 return 1; /* currently means nothing really */
6593}
6594
6595
6596#ifdef CONFIG_PROC_FS /* { */
6597/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598/*
6599 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6600 */
6601/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6602/**
6603 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6604 *
6605 * Returns 0 for success, non-zero for failure.
6606 */
6607static int
6608procmpt_create(void)
6609{
6610 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6611 if (mpt_proc_root_dir == NULL)
6612 return -ENOTDIR;
6613
6614 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6615 mpt_summary_proc_show);
6616 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6617 mpt_version_proc_show);
6618 return 0;
6619}
6620
6621/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6622/**
6623 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6624 *
6625 * Returns 0 for success, non-zero for failure.
6626 */
6627static void
6628procmpt_destroy(void)
6629{
6630 remove_proc_entry("version", mpt_proc_root_dir);
6631 remove_proc_entry("summary", mpt_proc_root_dir);
6632 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6633}
6634
6635/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6636/*
6637 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6638 */
6639static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6640
6641static int mpt_summary_proc_show(struct seq_file *m, void *v)
6642{
6643 MPT_ADAPTER *ioc = m->private;
6644
6645 if (ioc) {
6646 seq_mpt_print_ioc_summary(ioc, m, 1);
6647 } else {
6648 list_for_each_entry(ioc, &ioc_list, list) {
6649 seq_mpt_print_ioc_summary(ioc, m, 1);
6650 }
6651 }
6652
6653 return 0;
6654}
6655
6656static int mpt_version_proc_show(struct seq_file *m, void *v)
6657{
6658 u8 cb_idx;
6659 int scsi, fc, sas, lan, ctl, targ, dmp;
6660 char *drvname;
6661
6662 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6663 seq_printf(m, " Fusion MPT base driver\n");
6664
6665 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6666 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6667 drvname = NULL;
6668 if (MptCallbacks[cb_idx]) {
6669 switch (MptDriverClass[cb_idx]) {
6670 case MPTSPI_DRIVER:
6671 if (!scsi++) drvname = "SPI host";
6672 break;
6673 case MPTFC_DRIVER:
6674 if (!fc++) drvname = "FC host";
6675 break;
6676 case MPTSAS_DRIVER:
6677 if (!sas++) drvname = "SAS host";
6678 break;
6679 case MPTLAN_DRIVER:
6680 if (!lan++) drvname = "LAN";
6681 break;
6682 case MPTSTM_DRIVER:
6683 if (!targ++) drvname = "SCSI target";
6684 break;
6685 case MPTCTL_DRIVER:
6686 if (!ctl++) drvname = "ioctl";
6687 break;
6688 }
6689
6690 if (drvname)
6691 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6692 }
6693 }
6694
6695 return 0;
6696}
6697
6698static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6699{
6700 MPT_ADAPTER *ioc = m->private;
6701 char expVer[32];
6702 int sz;
6703 int p;
6704
6705 mpt_get_fw_exp_ver(expVer, ioc);
6706
6707 seq_printf(m, "%s:", ioc->name);
6708 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6709 seq_printf(m, " (f/w download boot flag set)");
6710// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6711// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6712
6713 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6714 ioc->facts.ProductID,
6715 ioc->prod_name);
6716 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6717 if (ioc->facts.FWImageSize)
6718 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6719 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6720 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6721 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6722
6723 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentHostMfaHighAddr);
6725 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6726 ioc->facts.CurrentSenseBufferHighAddr);
6727
6728 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6729 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6730
6731 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6732 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6733 /*
6734 * Rounding UP to nearest 4-kB boundary here...
6735 */
6736 sz = (ioc->req_sz * ioc->req_depth) + 128;
6737 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6738 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6739 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6740 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6741 4*ioc->facts.RequestFrameSize,
6742 ioc->facts.GlobalCredits);
6743
6744 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6745 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6746 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6747 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6748 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6749 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6750 ioc->facts.CurReplyFrameSize,
6751 ioc->facts.ReplyQueueDepth);
6752
6753 seq_printf(m, " MaxDevices = %d\n",
6754 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6755 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6756
6757 /* per-port info */
6758 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6759 seq_printf(m, " PortNumber = %d (of %d)\n",
6760 p+1,
6761 ioc->facts.NumberOfPorts);
6762 if (ioc->bus_type == FC) {
6763 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6764 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6765 seq_printf(m, " LanAddr = %pMR\n", a);
6766 }
6767 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6768 ioc->fc_port_page0[p].WWNN.High,
6769 ioc->fc_port_page0[p].WWNN.Low,
6770 ioc->fc_port_page0[p].WWPN.High,
6771 ioc->fc_port_page0[p].WWPN.Low);
6772 }
6773 }
6774
6775 return 0;
6776}
6777#endif /* CONFIG_PROC_FS } */
6778
6779/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6780static void
6781mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6782{
6783 buf[0] ='\0';
6784 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6785 sprintf(buf, " (Exp %02d%02d)",
6786 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6787 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6788
6789 /* insider hack! */
6790 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6791 strcat(buf, " [MDBG]");
6792 }
6793}
6794
6795/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6796/**
6797 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6798 * @ioc: Pointer to MPT_ADAPTER structure
6799 * @buffer: Pointer to buffer where IOC summary info should be written
6800 * @size: Pointer to number of bytes we wrote (set by this routine)
6801 * @len: Offset at which to start writing in buffer
6802 * @showlan: Display LAN stuff?
6803 *
6804 * This routine writes (english readable) ASCII text, which represents
6805 * a summary of IOC information, to a buffer.
6806 */
6807void
6808mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6809{
6810 char expVer[32];
6811 int y;
6812
6813 mpt_get_fw_exp_ver(expVer, ioc);
6814
6815 /*
6816 * Shorter summary of attached ioc's...
6817 */
6818 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6819 ioc->name,
6820 ioc->prod_name,
6821 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6822 ioc->facts.FWVersion.Word,
6823 expVer,
6824 ioc->facts.NumberOfPorts,
6825 ioc->req_depth);
6826
6827 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6828 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6829 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6830 }
6831
6832 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6833
6834 if (!ioc->active)
6835 y += sprintf(buffer+len+y, " (disabled)");
6836
6837 y += sprintf(buffer+len+y, "\n");
6838
6839 *size = y;
6840}
6841
6842#ifdef CONFIG_PROC_FS
6843static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6844{
6845 char expVer[32];
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 seq_printf(m, ", LanAddr=%pMR", a);
6864 }
6865
6866 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6867
6868 if (!ioc->active)
6869 seq_printf(m, " (disabled)");
6870
6871 seq_putc(m, '\n');
6872}
6873#endif
6874
6875/**
6876 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6877 * @ioc: Pointer to MPT_ADAPTER structure
6878 *
6879 * Returns 0 for SUCCESS or -1 if FAILED.
6880 *
6881 * If -1 is return, then it was not possible to set the flags
6882 **/
6883int
6884mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6885{
6886 unsigned long flags;
6887 int retval;
6888
6889 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6890 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6891 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6892 retval = -1;
6893 goto out;
6894 }
6895 retval = 0;
6896 ioc->taskmgmt_in_progress = 1;
6897 ioc->taskmgmt_quiesce_io = 1;
6898 if (ioc->alt_ioc) {
6899 ioc->alt_ioc->taskmgmt_in_progress = 1;
6900 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6901 }
6902 out:
6903 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6904 return retval;
6905}
6906EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6907
6908/**
6909 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6910 * @ioc: Pointer to MPT_ADAPTER structure
6911 *
6912 **/
6913void
6914mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6915{
6916 unsigned long flags;
6917
6918 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6919 ioc->taskmgmt_in_progress = 0;
6920 ioc->taskmgmt_quiesce_io = 0;
6921 if (ioc->alt_ioc) {
6922 ioc->alt_ioc->taskmgmt_in_progress = 0;
6923 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6924 }
6925 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6926}
6927EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6928
6929
6930/**
6931 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6932 * the kernel
6933 * @ioc: Pointer to MPT_ADAPTER structure
6934 *
6935 **/
6936void
6937mpt_halt_firmware(MPT_ADAPTER *ioc)
6938{
6939 u32 ioc_raw_state;
6940
6941 ioc_raw_state = mpt_GetIocState(ioc, 0);
6942
6943 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6944 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6945 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6947 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6948 } else {
6949 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6950 panic("%s: Firmware is halted due to command timeout\n",
6951 ioc->name);
6952 }
6953}
6954EXPORT_SYMBOL(mpt_halt_firmware);
6955
6956/**
6957 * mpt_SoftResetHandler - Issues a less expensive reset
6958 * @ioc: Pointer to MPT_ADAPTER structure
6959 * @sleepFlag: Indicates if sleep or schedule must be called.
6960 *
6961 * Returns 0 for SUCCESS or -1 if FAILED.
6962 *
6963 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6964 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6965 * All posted buffers are freed, and event notification is turned off.
6966 * IOC doesn't reply to any outstanding request. This will transfer IOC
6967 * to READY state.
6968 **/
6969static int
6970mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6971{
6972 int rc;
6973 int ii;
6974 u8 cb_idx;
6975 unsigned long flags;
6976 u32 ioc_state;
6977 unsigned long time_count;
6978
6979 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6980 ioc->name));
6981
6982 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6983
6984 if (mpt_fwfault_debug)
6985 mpt_halt_firmware(ioc);
6986
6987 if (ioc_state == MPI_IOC_STATE_FAULT ||
6988 ioc_state == MPI_IOC_STATE_RESET) {
6989 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6990 "skipping, either in FAULT or RESET state!\n", ioc->name));
6991 return -1;
6992 }
6993
6994 if (ioc->bus_type == FC) {
6995 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6996 "skipping, because the bus type is FC!\n", ioc->name));
6997 return -1;
6998 }
6999
7000 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7001 if (ioc->ioc_reset_in_progress) {
7002 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7003 return -1;
7004 }
7005 ioc->ioc_reset_in_progress = 1;
7006 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7007
7008 rc = -1;
7009
7010 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7011 if (MptResetHandlers[cb_idx])
7012 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7013 }
7014
7015 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7016 if (ioc->taskmgmt_in_progress) {
7017 ioc->ioc_reset_in_progress = 0;
7018 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7019 return -1;
7020 }
7021 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7022 /* Disable reply interrupts (also blocks FreeQ) */
7023 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7024 ioc->active = 0;
7025 time_count = jiffies;
7026
7027 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7028
7029 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7030 if (MptResetHandlers[cb_idx])
7031 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7032 }
7033
7034 if (rc)
7035 goto out;
7036
7037 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7038 if (ioc_state != MPI_IOC_STATE_READY)
7039 goto out;
7040
7041 for (ii = 0; ii < 5; ii++) {
7042 /* Get IOC facts! Allow 5 retries */
7043 rc = GetIocFacts(ioc, sleepFlag,
7044 MPT_HOSTEVENT_IOC_RECOVER);
7045 if (rc == 0)
7046 break;
7047 if (sleepFlag == CAN_SLEEP)
7048 msleep(100);
7049 else
7050 mdelay(100);
7051 }
7052 if (ii == 5)
7053 goto out;
7054
7055 rc = PrimeIocFifos(ioc);
7056 if (rc != 0)
7057 goto out;
7058
7059 rc = SendIocInit(ioc, sleepFlag);
7060 if (rc != 0)
7061 goto out;
7062
7063 rc = SendEventNotification(ioc, 1, sleepFlag);
7064 if (rc != 0)
7065 goto out;
7066
7067 if (ioc->hard_resets < -1)
7068 ioc->hard_resets++;
7069
7070 /*
7071 * At this point, we know soft reset succeeded.
7072 */
7073
7074 ioc->active = 1;
7075 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7076
7077 out:
7078 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7079 ioc->ioc_reset_in_progress = 0;
7080 ioc->taskmgmt_quiesce_io = 0;
7081 ioc->taskmgmt_in_progress = 0;
7082 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7083
7084 if (ioc->active) { /* otherwise, hard reset coming */
7085 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7086 if (MptResetHandlers[cb_idx])
7087 mpt_signal_reset(cb_idx, ioc,
7088 MPT_IOC_POST_RESET);
7089 }
7090 }
7091
7092 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7093 "SoftResetHandler: completed (%d seconds): %s\n",
7094 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7095 ((rc == 0) ? "SUCCESS" : "FAILED")));
7096
7097 return rc;
7098}
7099
7100/**
7101 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7102 * @ioc: Pointer to MPT_ADAPTER structure
7103 * @sleepFlag: Indicates if sleep or schedule must be called.
7104 *
7105 * Returns 0 for SUCCESS or -1 if FAILED.
7106 * Try for softreset first, only if it fails go for expensive
7107 * HardReset.
7108 **/
7109int
7110mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7111 int ret = -1;
7112
7113 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7114 if (ret == 0)
7115 return ret;
7116 ret = mpt_HardResetHandler(ioc, sleepFlag);
7117 return ret;
7118}
7119EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7120
7121/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7122/*
7123 * Reset Handling
7124 */
7125/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7126/**
7127 * mpt_HardResetHandler - Generic reset handler
7128 * @ioc: Pointer to MPT_ADAPTER structure
7129 * @sleepFlag: Indicates if sleep or schedule must be called.
7130 *
7131 * Issues SCSI Task Management call based on input arg values.
7132 * If TaskMgmt fails, returns associated SCSI request.
7133 *
7134 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7135 * or a non-interrupt thread. In the former, must not call schedule().
7136 *
7137 * Note: A return of -1 is a FATAL error case, as it means a
7138 * FW reload/initialization failed.
7139 *
7140 * Returns 0 for SUCCESS or -1 if FAILED.
7141 */
7142int
7143mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7144{
7145 int rc;
7146 u8 cb_idx;
7147 unsigned long flags;
7148 unsigned long time_count;
7149
7150 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7151#ifdef MFCNT
7152 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7153 printk("MF count 0x%x !\n", ioc->mfcnt);
7154#endif
7155 if (mpt_fwfault_debug)
7156 mpt_halt_firmware(ioc);
7157
7158 /* Reset the adapter. Prevent more than 1 call to
7159 * mpt_do_ioc_recovery at any instant in time.
7160 */
7161 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7162 if (ioc->ioc_reset_in_progress) {
7163 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7164 ioc->wait_on_reset_completion = 1;
7165 do {
7166 ssleep(1);
7167 } while (ioc->ioc_reset_in_progress == 1);
7168 ioc->wait_on_reset_completion = 0;
7169 return ioc->reset_status;
7170 }
7171 if (ioc->wait_on_reset_completion) {
7172 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7173 rc = 0;
7174 time_count = jiffies;
7175 goto exit;
7176 }
7177 ioc->ioc_reset_in_progress = 1;
7178 if (ioc->alt_ioc)
7179 ioc->alt_ioc->ioc_reset_in_progress = 1;
7180 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7181
7182
7183 /* The SCSI driver needs to adjust timeouts on all current
7184 * commands prior to the diagnostic reset being issued.
7185 * Prevents timeouts occurring during a diagnostic reset...very bad.
7186 * For all other protocol drivers, this is a no-op.
7187 */
7188 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7189 if (MptResetHandlers[cb_idx]) {
7190 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7191 if (ioc->alt_ioc)
7192 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7193 MPT_IOC_SETUP_RESET);
7194 }
7195 }
7196
7197 time_count = jiffies;
7198 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7199 if (rc != 0) {
7200 printk(KERN_WARNING MYNAM
7201 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7202 rc, ioc->name, mpt_GetIocState(ioc, 0));
7203 } else {
7204 if (ioc->hard_resets < -1)
7205 ioc->hard_resets++;
7206 }
7207
7208 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7209 ioc->ioc_reset_in_progress = 0;
7210 ioc->taskmgmt_quiesce_io = 0;
7211 ioc->taskmgmt_in_progress = 0;
7212 ioc->reset_status = rc;
7213 if (ioc->alt_ioc) {
7214 ioc->alt_ioc->ioc_reset_in_progress = 0;
7215 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7216 ioc->alt_ioc->taskmgmt_in_progress = 0;
7217 }
7218 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7219
7220 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7221 if (MptResetHandlers[cb_idx]) {
7222 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7223 if (ioc->alt_ioc)
7224 mpt_signal_reset(cb_idx,
7225 ioc->alt_ioc, MPT_IOC_POST_RESET);
7226 }
7227 }
7228exit:
7229 dtmprintk(ioc,
7230 printk(MYIOC_s_DEBUG_FMT
7231 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7232 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7233 "SUCCESS" : "FAILED")));
7234
7235 return rc;
7236}
7237
7238#ifdef CONFIG_FUSION_LOGGING
7239static void
7240mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7241{
7242 char *ds = NULL;
7243 u32 evData0;
7244 int ii;
7245 u8 event;
7246 char *evStr = ioc->evStr;
7247
7248 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7249 evData0 = le32_to_cpu(pEventReply->Data[0]);
7250
7251 switch(event) {
7252 case MPI_EVENT_NONE:
7253 ds = "None";
7254 break;
7255 case MPI_EVENT_LOG_DATA:
7256 ds = "Log Data";
7257 break;
7258 case MPI_EVENT_STATE_CHANGE:
7259 ds = "State Change";
7260 break;
7261 case MPI_EVENT_UNIT_ATTENTION:
7262 ds = "Unit Attention";
7263 break;
7264 case MPI_EVENT_IOC_BUS_RESET:
7265 ds = "IOC Bus Reset";
7266 break;
7267 case MPI_EVENT_EXT_BUS_RESET:
7268 ds = "External Bus Reset";
7269 break;
7270 case MPI_EVENT_RESCAN:
7271 ds = "Bus Rescan Event";
7272 break;
7273 case MPI_EVENT_LINK_STATUS_CHANGE:
7274 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7275 ds = "Link Status(FAILURE) Change";
7276 else
7277 ds = "Link Status(ACTIVE) Change";
7278 break;
7279 case MPI_EVENT_LOOP_STATE_CHANGE:
7280 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7281 ds = "Loop State(LIP) Change";
7282 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7283 ds = "Loop State(LPE) Change";
7284 else
7285 ds = "Loop State(LPB) Change";
7286 break;
7287 case MPI_EVENT_LOGOUT:
7288 ds = "Logout";
7289 break;
7290 case MPI_EVENT_EVENT_CHANGE:
7291 if (evData0)
7292 ds = "Events ON";
7293 else
7294 ds = "Events OFF";
7295 break;
7296 case MPI_EVENT_INTEGRATED_RAID:
7297 {
7298 u8 ReasonCode = (u8)(evData0 >> 16);
7299 switch (ReasonCode) {
7300 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7301 ds = "Integrated Raid: Volume Created";
7302 break;
7303 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7304 ds = "Integrated Raid: Volume Deleted";
7305 break;
7306 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7307 ds = "Integrated Raid: Volume Settings Changed";
7308 break;
7309 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7310 ds = "Integrated Raid: Volume Status Changed";
7311 break;
7312 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7313 ds = "Integrated Raid: Volume Physdisk Changed";
7314 break;
7315 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7316 ds = "Integrated Raid: Physdisk Created";
7317 break;
7318 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7319 ds = "Integrated Raid: Physdisk Deleted";
7320 break;
7321 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7322 ds = "Integrated Raid: Physdisk Settings Changed";
7323 break;
7324 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7325 ds = "Integrated Raid: Physdisk Status Changed";
7326 break;
7327 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7328 ds = "Integrated Raid: Domain Validation Needed";
7329 break;
7330 case MPI_EVENT_RAID_RC_SMART_DATA :
7331 ds = "Integrated Raid; Smart Data";
7332 break;
7333 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7334 ds = "Integrated Raid: Replace Action Started";
7335 break;
7336 default:
7337 ds = "Integrated Raid";
7338 break;
7339 }
7340 break;
7341 }
7342 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7343 ds = "SCSI Device Status Change";
7344 break;
7345 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7346 {
7347 u8 id = (u8)(evData0);
7348 u8 channel = (u8)(evData0 >> 8);
7349 u8 ReasonCode = (u8)(evData0 >> 16);
7350 switch (ReasonCode) {
7351 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7352 snprintf(evStr, EVENT_DESCR_STR_SZ,
7353 "SAS Device Status Change: Added: "
7354 "id=%d channel=%d", id, channel);
7355 break;
7356 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7357 snprintf(evStr, EVENT_DESCR_STR_SZ,
7358 "SAS Device Status Change: Deleted: "
7359 "id=%d channel=%d", id, channel);
7360 break;
7361 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7362 snprintf(evStr, EVENT_DESCR_STR_SZ,
7363 "SAS Device Status Change: SMART Data: "
7364 "id=%d channel=%d", id, channel);
7365 break;
7366 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7367 snprintf(evStr, EVENT_DESCR_STR_SZ,
7368 "SAS Device Status Change: No Persistency: "
7369 "id=%d channel=%d", id, channel);
7370 break;
7371 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7372 snprintf(evStr, EVENT_DESCR_STR_SZ,
7373 "SAS Device Status Change: Unsupported Device "
7374 "Discovered : id=%d channel=%d", id, channel);
7375 break;
7376 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7377 snprintf(evStr, EVENT_DESCR_STR_SZ,
7378 "SAS Device Status Change: Internal Device "
7379 "Reset : id=%d channel=%d", id, channel);
7380 break;
7381 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7382 snprintf(evStr, EVENT_DESCR_STR_SZ,
7383 "SAS Device Status Change: Internal Task "
7384 "Abort : id=%d channel=%d", id, channel);
7385 break;
7386 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7387 snprintf(evStr, EVENT_DESCR_STR_SZ,
7388 "SAS Device Status Change: Internal Abort "
7389 "Task Set : id=%d channel=%d", id, channel);
7390 break;
7391 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7392 snprintf(evStr, EVENT_DESCR_STR_SZ,
7393 "SAS Device Status Change: Internal Clear "
7394 "Task Set : id=%d channel=%d", id, channel);
7395 break;
7396 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7397 snprintf(evStr, EVENT_DESCR_STR_SZ,
7398 "SAS Device Status Change: Internal Query "
7399 "Task : id=%d channel=%d", id, channel);
7400 break;
7401 default:
7402 snprintf(evStr, EVENT_DESCR_STR_SZ,
7403 "SAS Device Status Change: Unknown: "
7404 "id=%d channel=%d", id, channel);
7405 break;
7406 }
7407 break;
7408 }
7409 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7410 ds = "Bus Timer Expired";
7411 break;
7412 case MPI_EVENT_QUEUE_FULL:
7413 {
7414 u16 curr_depth = (u16)(evData0 >> 16);
7415 u8 channel = (u8)(evData0 >> 8);
7416 u8 id = (u8)(evData0);
7417
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "Queue Full: channel=%d id=%d depth=%d",
7420 channel, id, curr_depth);
7421 break;
7422 }
7423 case MPI_EVENT_SAS_SES:
7424 ds = "SAS SES Event";
7425 break;
7426 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7427 ds = "Persistent Table Full";
7428 break;
7429 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7430 {
7431 u8 LinkRates = (u8)(evData0 >> 8);
7432 u8 PhyNumber = (u8)(evData0);
7433 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7434 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7435 switch (LinkRates) {
7436 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7437 snprintf(evStr, EVENT_DESCR_STR_SZ,
7438 "SAS PHY Link Status: Phy=%d:"
7439 " Rate Unknown",PhyNumber);
7440 break;
7441 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7442 snprintf(evStr, EVENT_DESCR_STR_SZ,
7443 "SAS PHY Link Status: Phy=%d:"
7444 " Phy Disabled",PhyNumber);
7445 break;
7446 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7447 snprintf(evStr, EVENT_DESCR_STR_SZ,
7448 "SAS PHY Link Status: Phy=%d:"
7449 " Failed Speed Nego",PhyNumber);
7450 break;
7451 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7452 snprintf(evStr, EVENT_DESCR_STR_SZ,
7453 "SAS PHY Link Status: Phy=%d:"
7454 " Sata OOB Completed",PhyNumber);
7455 break;
7456 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7457 snprintf(evStr, EVENT_DESCR_STR_SZ,
7458 "SAS PHY Link Status: Phy=%d:"
7459 " Rate 1.5 Gbps",PhyNumber);
7460 break;
7461 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7462 snprintf(evStr, EVENT_DESCR_STR_SZ,
7463 "SAS PHY Link Status: Phy=%d:"
7464 " Rate 3.0 Gbps", PhyNumber);
7465 break;
7466 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7467 snprintf(evStr, EVENT_DESCR_STR_SZ,
7468 "SAS PHY Link Status: Phy=%d:"
7469 " Rate 6.0 Gbps", PhyNumber);
7470 break;
7471 default:
7472 snprintf(evStr, EVENT_DESCR_STR_SZ,
7473 "SAS PHY Link Status: Phy=%d", PhyNumber);
7474 break;
7475 }
7476 break;
7477 }
7478 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7479 ds = "SAS Discovery Error";
7480 break;
7481 case MPI_EVENT_IR_RESYNC_UPDATE:
7482 {
7483 u8 resync_complete = (u8)(evData0 >> 16);
7484 snprintf(evStr, EVENT_DESCR_STR_SZ,
7485 "IR Resync Update: Complete = %d:",resync_complete);
7486 break;
7487 }
7488 case MPI_EVENT_IR2:
7489 {
7490 u8 id = (u8)(evData0);
7491 u8 channel = (u8)(evData0 >> 8);
7492 u8 phys_num = (u8)(evData0 >> 24);
7493 u8 ReasonCode = (u8)(evData0 >> 16);
7494
7495 switch (ReasonCode) {
7496 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7497 snprintf(evStr, EVENT_DESCR_STR_SZ,
7498 "IR2: LD State Changed: "
7499 "id=%d channel=%d phys_num=%d",
7500 id, channel, phys_num);
7501 break;
7502 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "IR2: PD State Changed "
7505 "id=%d channel=%d phys_num=%d",
7506 id, channel, phys_num);
7507 break;
7508 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7509 snprintf(evStr, EVENT_DESCR_STR_SZ,
7510 "IR2: Bad Block Table Full: "
7511 "id=%d channel=%d phys_num=%d",
7512 id, channel, phys_num);
7513 break;
7514 case MPI_EVENT_IR2_RC_PD_INSERTED:
7515 snprintf(evStr, EVENT_DESCR_STR_SZ,
7516 "IR2: PD Inserted: "
7517 "id=%d channel=%d phys_num=%d",
7518 id, channel, phys_num);
7519 break;
7520 case MPI_EVENT_IR2_RC_PD_REMOVED:
7521 snprintf(evStr, EVENT_DESCR_STR_SZ,
7522 "IR2: PD Removed: "
7523 "id=%d channel=%d phys_num=%d",
7524 id, channel, phys_num);
7525 break;
7526 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7527 snprintf(evStr, EVENT_DESCR_STR_SZ,
7528 "IR2: Foreign CFG Detected: "
7529 "id=%d channel=%d phys_num=%d",
7530 id, channel, phys_num);
7531 break;
7532 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7533 snprintf(evStr, EVENT_DESCR_STR_SZ,
7534 "IR2: Rebuild Medium Error: "
7535 "id=%d channel=%d phys_num=%d",
7536 id, channel, phys_num);
7537 break;
7538 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7539 snprintf(evStr, EVENT_DESCR_STR_SZ,
7540 "IR2: Dual Port Added: "
7541 "id=%d channel=%d phys_num=%d",
7542 id, channel, phys_num);
7543 break;
7544 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7545 snprintf(evStr, EVENT_DESCR_STR_SZ,
7546 "IR2: Dual Port Removed: "
7547 "id=%d channel=%d phys_num=%d",
7548 id, channel, phys_num);
7549 break;
7550 default:
7551 ds = "IR2";
7552 break;
7553 }
7554 break;
7555 }
7556 case MPI_EVENT_SAS_DISCOVERY:
7557 {
7558 if (evData0)
7559 ds = "SAS Discovery: Start";
7560 else
7561 ds = "SAS Discovery: Stop";
7562 break;
7563 }
7564 case MPI_EVENT_LOG_ENTRY_ADDED:
7565 ds = "SAS Log Entry Added";
7566 break;
7567
7568 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7569 {
7570 u8 phy_num = (u8)(evData0);
7571 u8 port_num = (u8)(evData0 >> 8);
7572 u8 port_width = (u8)(evData0 >> 16);
7573 u8 primitive = (u8)(evData0 >> 24);
7574 snprintf(evStr, EVENT_DESCR_STR_SZ,
7575 "SAS Broadcast Primitive: phy=%d port=%d "
7576 "width=%d primitive=0x%02x",
7577 phy_num, port_num, port_width, primitive);
7578 break;
7579 }
7580
7581 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7582 {
7583 u8 reason = (u8)(evData0);
7584
7585 switch (reason) {
7586 case MPI_EVENT_SAS_INIT_RC_ADDED:
7587 ds = "SAS Initiator Status Change: Added";
7588 break;
7589 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7590 ds = "SAS Initiator Status Change: Deleted";
7591 break;
7592 default:
7593 ds = "SAS Initiator Status Change";
7594 break;
7595 }
7596 break;
7597 }
7598
7599 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7600 {
7601 u8 max_init = (u8)(evData0);
7602 u8 current_init = (u8)(evData0 >> 8);
7603
7604 snprintf(evStr, EVENT_DESCR_STR_SZ,
7605 "SAS Initiator Device Table Overflow: max initiators=%02d "
7606 "current initiators=%02d",
7607 max_init, current_init);
7608 break;
7609 }
7610 case MPI_EVENT_SAS_SMP_ERROR:
7611 {
7612 u8 status = (u8)(evData0);
7613 u8 port_num = (u8)(evData0 >> 8);
7614 u8 result = (u8)(evData0 >> 16);
7615
7616 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7617 snprintf(evStr, EVENT_DESCR_STR_SZ,
7618 "SAS SMP Error: port=%d result=0x%02x",
7619 port_num, result);
7620 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7621 snprintf(evStr, EVENT_DESCR_STR_SZ,
7622 "SAS SMP Error: port=%d : CRC Error",
7623 port_num);
7624 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7625 snprintf(evStr, EVENT_DESCR_STR_SZ,
7626 "SAS SMP Error: port=%d : Timeout",
7627 port_num);
7628 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7629 snprintf(evStr, EVENT_DESCR_STR_SZ,
7630 "SAS SMP Error: port=%d : No Destination",
7631 port_num);
7632 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7633 snprintf(evStr, EVENT_DESCR_STR_SZ,
7634 "SAS SMP Error: port=%d : Bad Destination",
7635 port_num);
7636 else
7637 snprintf(evStr, EVENT_DESCR_STR_SZ,
7638 "SAS SMP Error: port=%d : status=0x%02x",
7639 port_num, status);
7640 break;
7641 }
7642
7643 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7644 {
7645 u8 reason = (u8)(evData0);
7646
7647 switch (reason) {
7648 case MPI_EVENT_SAS_EXP_RC_ADDED:
7649 ds = "Expander Status Change: Added";
7650 break;
7651 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7652 ds = "Expander Status Change: Deleted";
7653 break;
7654 default:
7655 ds = "Expander Status Change";
7656 break;
7657 }
7658 break;
7659 }
7660
7661 /*
7662 * MPT base "custom" events may be added here...
7663 */
7664 default:
7665 ds = "Unknown";
7666 break;
7667 }
7668 if (ds)
7669 strlcpy(evStr, ds, EVENT_DESCR_STR_SZ);
7670
7671
7672 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7673 "MPT event:(%02Xh) : %s\n",
7674 ioc->name, event, evStr));
7675
7676 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7677 ": Event data:\n"));
7678 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7679 devtverboseprintk(ioc, printk(" %08x",
7680 le32_to_cpu(pEventReply->Data[ii])));
7681 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7682}
7683#endif
7684/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7685/**
7686 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7687 * @ioc: Pointer to MPT_ADAPTER structure
7688 * @pEventReply: Pointer to EventNotification reply frame
7689 * @evHandlers: Pointer to integer, number of event handlers
7690 *
7691 * Routes a received EventNotificationReply to all currently registered
7692 * event handlers.
7693 * Returns sum of event handlers return values.
7694 */
7695static int
7696ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7697{
7698 u16 evDataLen;
7699 u32 evData0 = 0;
7700 int ii;
7701 u8 cb_idx;
7702 int r = 0;
7703 int handlers = 0;
7704 u8 event;
7705
7706 /*
7707 * Do platform normalization of values
7708 */
7709 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7710 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7711 if (evDataLen) {
7712 evData0 = le32_to_cpu(pEventReply->Data[0]);
7713 }
7714
7715#ifdef CONFIG_FUSION_LOGGING
7716 if (evDataLen)
7717 mpt_display_event_info(ioc, pEventReply);
7718#endif
7719
7720 /*
7721 * Do general / base driver event processing
7722 */
7723 switch(event) {
7724 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7725 if (evDataLen) {
7726 u8 evState = evData0 & 0xFF;
7727
7728 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7729
7730 /* Update EventState field in cached IocFacts */
7731 if (ioc->facts.Function) {
7732 ioc->facts.EventState = evState;
7733 }
7734 }
7735 break;
7736 case MPI_EVENT_INTEGRATED_RAID:
7737 mptbase_raid_process_event_data(ioc,
7738 (MpiEventDataRaid_t *)pEventReply->Data);
7739 break;
7740 default:
7741 break;
7742 }
7743
7744 /*
7745 * Should this event be logged? Events are written sequentially.
7746 * When buffer is full, start again at the top.
7747 */
7748 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7749 int idx;
7750
7751 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7752
7753 ioc->events[idx].event = event;
7754 ioc->events[idx].eventContext = ioc->eventContext;
7755
7756 for (ii = 0; ii < 2; ii++) {
7757 if (ii < evDataLen)
7758 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7759 else
7760 ioc->events[idx].data[ii] = 0;
7761 }
7762
7763 ioc->eventContext++;
7764 }
7765
7766
7767 /*
7768 * Call each currently registered protocol event handler.
7769 */
7770 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7771 if (MptEvHandlers[cb_idx]) {
7772 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7773 "Routing Event to event handler #%d\n",
7774 ioc->name, cb_idx));
7775 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7776 handlers++;
7777 }
7778 }
7779 /* FIXME? Examine results here? */
7780
7781 /*
7782 * If needed, send (a single) EventAck.
7783 */
7784 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7785 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7786 "EventAck required\n",ioc->name));
7787 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7788 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7789 ioc->name, ii));
7790 }
7791 }
7792
7793 *evHandlers = handlers;
7794 return r;
7795}
7796
7797/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7798/**
7799 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7800 * @ioc: Pointer to MPT_ADAPTER structure
7801 * @log_info: U32 LogInfo reply word from the IOC
7802 *
7803 * Refer to lsi/mpi_log_fc.h.
7804 */
7805static void
7806mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7807{
7808 char *desc = "unknown";
7809
7810 switch (log_info & 0xFF000000) {
7811 case MPI_IOCLOGINFO_FC_INIT_BASE:
7812 desc = "FCP Initiator";
7813 break;
7814 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7815 desc = "FCP Target";
7816 break;
7817 case MPI_IOCLOGINFO_FC_LAN_BASE:
7818 desc = "LAN";
7819 break;
7820 case MPI_IOCLOGINFO_FC_MSG_BASE:
7821 desc = "MPI Message Layer";
7822 break;
7823 case MPI_IOCLOGINFO_FC_LINK_BASE:
7824 desc = "FC Link";
7825 break;
7826 case MPI_IOCLOGINFO_FC_CTX_BASE:
7827 desc = "Context Manager";
7828 break;
7829 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7830 desc = "Invalid Field Offset";
7831 break;
7832 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7833 desc = "State Change Info";
7834 break;
7835 }
7836
7837 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7838 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7839}
7840
7841/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7842/**
7843 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7844 * @ioc: Pointer to MPT_ADAPTER structure
7845 * @log_info: U32 LogInfo word from the IOC
7846 *
7847 * Refer to lsi/sp_log.h.
7848 */
7849static void
7850mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7851{
7852 u32 info = log_info & 0x00FF0000;
7853 char *desc = "unknown";
7854
7855 switch (info) {
7856 case 0x00010000:
7857 desc = "bug! MID not found";
7858 break;
7859
7860 case 0x00020000:
7861 desc = "Parity Error";
7862 break;
7863
7864 case 0x00030000:
7865 desc = "ASYNC Outbound Overrun";
7866 break;
7867
7868 case 0x00040000:
7869 desc = "SYNC Offset Error";
7870 break;
7871
7872 case 0x00050000:
7873 desc = "BM Change";
7874 break;
7875
7876 case 0x00060000:
7877 desc = "Msg In Overflow";
7878 break;
7879
7880 case 0x00070000:
7881 desc = "DMA Error";
7882 break;
7883
7884 case 0x00080000:
7885 desc = "Outbound DMA Overrun";
7886 break;
7887
7888 case 0x00090000:
7889 desc = "Task Management";
7890 break;
7891
7892 case 0x000A0000:
7893 desc = "Device Problem";
7894 break;
7895
7896 case 0x000B0000:
7897 desc = "Invalid Phase Change";
7898 break;
7899
7900 case 0x000C0000:
7901 desc = "Untagged Table Size";
7902 break;
7903
7904 }
7905
7906 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7907}
7908
7909/* strings for sas loginfo */
7910 static char *originator_str[] = {
7911 "IOP", /* 00h */
7912 "PL", /* 01h */
7913 "IR" /* 02h */
7914 };
7915 static char *iop_code_str[] = {
7916 NULL, /* 00h */
7917 "Invalid SAS Address", /* 01h */
7918 NULL, /* 02h */
7919 "Invalid Page", /* 03h */
7920 "Diag Message Error", /* 04h */
7921 "Task Terminated", /* 05h */
7922 "Enclosure Management", /* 06h */
7923 "Target Mode" /* 07h */
7924 };
7925 static char *pl_code_str[] = {
7926 NULL, /* 00h */
7927 "Open Failure", /* 01h */
7928 "Invalid Scatter Gather List", /* 02h */
7929 "Wrong Relative Offset or Frame Length", /* 03h */
7930 "Frame Transfer Error", /* 04h */
7931 "Transmit Frame Connected Low", /* 05h */
7932 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7933 "SATA Read Log Receive Data Error", /* 07h */
7934 "SATA NCQ Fail All Commands After Error", /* 08h */
7935 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7936 "Receive Frame Invalid Message", /* 0Ah */
7937 "Receive Context Message Valid Error", /* 0Bh */
7938 "Receive Frame Current Frame Error", /* 0Ch */
7939 "SATA Link Down", /* 0Dh */
7940 "Discovery SATA Init W IOS", /* 0Eh */
7941 "Config Invalid Page", /* 0Fh */
7942 "Discovery SATA Init Timeout", /* 10h */
7943 "Reset", /* 11h */
7944 "Abort", /* 12h */
7945 "IO Not Yet Executed", /* 13h */
7946 "IO Executed", /* 14h */
7947 "Persistent Reservation Out Not Affiliation "
7948 "Owner", /* 15h */
7949 "Open Transmit DMA Abort", /* 16h */
7950 "IO Device Missing Delay Retry", /* 17h */
7951 "IO Cancelled Due to Receive Error", /* 18h */
7952 NULL, /* 19h */
7953 NULL, /* 1Ah */
7954 NULL, /* 1Bh */
7955 NULL, /* 1Ch */
7956 NULL, /* 1Dh */
7957 NULL, /* 1Eh */
7958 NULL, /* 1Fh */
7959 "Enclosure Management" /* 20h */
7960 };
7961 static char *ir_code_str[] = {
7962 "Raid Action Error", /* 00h */
7963 NULL, /* 00h */
7964 NULL, /* 01h */
7965 NULL, /* 02h */
7966 NULL, /* 03h */
7967 NULL, /* 04h */
7968 NULL, /* 05h */
7969 NULL, /* 06h */
7970 NULL /* 07h */
7971 };
7972 static char *raid_sub_code_str[] = {
7973 NULL, /* 00h */
7974 "Volume Creation Failed: Data Passed too "
7975 "Large", /* 01h */
7976 "Volume Creation Failed: Duplicate Volumes "
7977 "Attempted", /* 02h */
7978 "Volume Creation Failed: Max Number "
7979 "Supported Volumes Exceeded", /* 03h */
7980 "Volume Creation Failed: DMA Error", /* 04h */
7981 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7982 "Volume Creation Failed: Error Reading "
7983 "MFG Page 4", /* 06h */
7984 "Volume Creation Failed: Creating Internal "
7985 "Structures", /* 07h */
7986 NULL, /* 08h */
7987 NULL, /* 09h */
7988 NULL, /* 0Ah */
7989 NULL, /* 0Bh */
7990 NULL, /* 0Ch */
7991 NULL, /* 0Dh */
7992 NULL, /* 0Eh */
7993 NULL, /* 0Fh */
7994 "Activation failed: Already Active Volume", /* 10h */
7995 "Activation failed: Unsupported Volume Type", /* 11h */
7996 "Activation failed: Too Many Active Volumes", /* 12h */
7997 "Activation failed: Volume ID in Use", /* 13h */
7998 "Activation failed: Reported Failure", /* 14h */
7999 "Activation failed: Importing a Volume", /* 15h */
8000 NULL, /* 16h */
8001 NULL, /* 17h */
8002 NULL, /* 18h */
8003 NULL, /* 19h */
8004 NULL, /* 1Ah */
8005 NULL, /* 1Bh */
8006 NULL, /* 1Ch */
8007 NULL, /* 1Dh */
8008 NULL, /* 1Eh */
8009 NULL, /* 1Fh */
8010 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8011 "Phys Disk failed: Data Passed too Large", /* 21h */
8012 "Phys Disk failed: DMA Error", /* 22h */
8013 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8014 "Phys Disk failed: Creating Phys Disk Config "
8015 "Page", /* 24h */
8016 NULL, /* 25h */
8017 NULL, /* 26h */
8018 NULL, /* 27h */
8019 NULL, /* 28h */
8020 NULL, /* 29h */
8021 NULL, /* 2Ah */
8022 NULL, /* 2Bh */
8023 NULL, /* 2Ch */
8024 NULL, /* 2Dh */
8025 NULL, /* 2Eh */
8026 NULL, /* 2Fh */
8027 "Compatibility Error: IR Disabled", /* 30h */
8028 "Compatibility Error: Inquiry Command Failed", /* 31h */
8029 "Compatibility Error: Device not Direct Access "
8030 "Device ", /* 32h */
8031 "Compatibility Error: Removable Device Found", /* 33h */
8032 "Compatibility Error: Device SCSI Version not "
8033 "2 or Higher", /* 34h */
8034 "Compatibility Error: SATA Device, 48 BIT LBA "
8035 "not Supported", /* 35h */
8036 "Compatibility Error: Device doesn't have "
8037 "512 Byte Block Sizes", /* 36h */
8038 "Compatibility Error: Volume Type Check Failed", /* 37h */
8039 "Compatibility Error: Volume Type is "
8040 "Unsupported by FW", /* 38h */
8041 "Compatibility Error: Disk Drive too Small for "
8042 "use in Volume", /* 39h */
8043 "Compatibility Error: Phys Disk for Create "
8044 "Volume not Found", /* 3Ah */
8045 "Compatibility Error: Too Many or too Few "
8046 "Disks for Volume Type", /* 3Bh */
8047 "Compatibility Error: Disk stripe Sizes "
8048 "Must be 64KB", /* 3Ch */
8049 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8050 };
8051
8052/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8053/**
8054 * mpt_sas_log_info - Log information returned from SAS IOC.
8055 * @ioc: Pointer to MPT_ADAPTER structure
8056 * @log_info: U32 LogInfo reply word from the IOC
8057 * @cb_idx: callback function's handle
8058 *
8059 * Refer to lsi/mpi_log_sas.h.
8060 **/
8061static void
8062mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8063{
8064 union loginfo_type {
8065 u32 loginfo;
8066 struct {
8067 u32 subcode:16;
8068 u32 code:8;
8069 u32 originator:4;
8070 u32 bus_type:4;
8071 } dw;
8072 };
8073 union loginfo_type sas_loginfo;
8074 char *originator_desc = NULL;
8075 char *code_desc = NULL;
8076 char *sub_code_desc = NULL;
8077
8078 sas_loginfo.loginfo = log_info;
8079 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8080 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8081 return;
8082
8083 originator_desc = originator_str[sas_loginfo.dw.originator];
8084
8085 switch (sas_loginfo.dw.originator) {
8086
8087 case 0: /* IOP */
8088 if (sas_loginfo.dw.code <
8089 ARRAY_SIZE(iop_code_str))
8090 code_desc = iop_code_str[sas_loginfo.dw.code];
8091 break;
8092 case 1: /* PL */
8093 if (sas_loginfo.dw.code <
8094 ARRAY_SIZE(pl_code_str))
8095 code_desc = pl_code_str[sas_loginfo.dw.code];
8096 break;
8097 case 2: /* IR */
8098 if (sas_loginfo.dw.code >=
8099 ARRAY_SIZE(ir_code_str))
8100 break;
8101 code_desc = ir_code_str[sas_loginfo.dw.code];
8102 if (sas_loginfo.dw.subcode >=
8103 ARRAY_SIZE(raid_sub_code_str))
8104 break;
8105 if (sas_loginfo.dw.code == 0)
8106 sub_code_desc =
8107 raid_sub_code_str[sas_loginfo.dw.subcode];
8108 break;
8109 default:
8110 return;
8111 }
8112
8113 if (sub_code_desc != NULL)
8114 printk(MYIOC_s_INFO_FMT
8115 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8116 " SubCode={%s} cb_idx %s\n",
8117 ioc->name, log_info, originator_desc, code_desc,
8118 sub_code_desc, MptCallbacksName[cb_idx]);
8119 else if (code_desc != NULL)
8120 printk(MYIOC_s_INFO_FMT
8121 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8122 " SubCode(0x%04x) cb_idx %s\n",
8123 ioc->name, log_info, originator_desc, code_desc,
8124 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8125 else
8126 printk(MYIOC_s_INFO_FMT
8127 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8128 " SubCode(0x%04x) cb_idx %s\n",
8129 ioc->name, log_info, originator_desc,
8130 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8131 MptCallbacksName[cb_idx]);
8132}
8133
8134/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8135/**
8136 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8137 * @ioc: Pointer to MPT_ADAPTER structure
8138 * @ioc_status: U32 IOCStatus word from IOC
8139 * @mf: Pointer to MPT request frame
8140 *
8141 * Refer to lsi/mpi.h.
8142 **/
8143static void
8144mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8145{
8146 Config_t *pReq = (Config_t *)mf;
8147 char extend_desc[EVENT_DESCR_STR_SZ];
8148 char *desc = NULL;
8149 u32 form;
8150 u8 page_type;
8151
8152 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8153 page_type = pReq->ExtPageType;
8154 else
8155 page_type = pReq->Header.PageType;
8156
8157 /*
8158 * ignore invalid page messages for GET_NEXT_HANDLE
8159 */
8160 form = le32_to_cpu(pReq->PageAddress);
8161 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8162 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8163 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8164 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8165 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8166 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8167 return;
8168 }
8169 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8170 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8171 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8172 return;
8173 }
8174
8175 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8176 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8177 page_type, pReq->Header.PageNumber, pReq->Action, form);
8178
8179 switch (ioc_status) {
8180
8181 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8182 desc = "Config Page Invalid Action";
8183 break;
8184
8185 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8186 desc = "Config Page Invalid Type";
8187 break;
8188
8189 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8190 desc = "Config Page Invalid Page";
8191 break;
8192
8193 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8194 desc = "Config Page Invalid Data";
8195 break;
8196
8197 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8198 desc = "Config Page No Defaults";
8199 break;
8200
8201 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8202 desc = "Config Page Can't Commit";
8203 break;
8204 }
8205
8206 if (!desc)
8207 return;
8208
8209 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8210 ioc->name, ioc_status, desc, extend_desc));
8211}
8212
8213/**
8214 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8215 * @ioc: Pointer to MPT_ADAPTER structure
8216 * @ioc_status: U32 IOCStatus word from IOC
8217 * @mf: Pointer to MPT request frame
8218 *
8219 * Refer to lsi/mpi.h.
8220 **/
8221static void
8222mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8223{
8224 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8225 char *desc = NULL;
8226
8227 switch (status) {
8228
8229/****************************************************************************/
8230/* Common IOCStatus values for all replies */
8231/****************************************************************************/
8232
8233 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8234 desc = "Invalid Function";
8235 break;
8236
8237 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8238 desc = "Busy";
8239 break;
8240
8241 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8242 desc = "Invalid SGL";
8243 break;
8244
8245 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8246 desc = "Internal Error";
8247 break;
8248
8249 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8250 desc = "Reserved";
8251 break;
8252
8253 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8254 desc = "Insufficient Resources";
8255 break;
8256
8257 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8258 desc = "Invalid Field";
8259 break;
8260
8261 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8262 desc = "Invalid State";
8263 break;
8264
8265/****************************************************************************/
8266/* Config IOCStatus values */
8267/****************************************************************************/
8268
8269 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8270 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8271 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8272 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8273 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8274 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8275 mpt_iocstatus_info_config(ioc, status, mf);
8276 break;
8277
8278/****************************************************************************/
8279/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8280/* */
8281/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8282/* */
8283/****************************************************************************/
8284
8285 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8286 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8287 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8288 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8289 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8290 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8291 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8292 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8293 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8294 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8295 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8296 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8297 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8298 break;
8299
8300/****************************************************************************/
8301/* SCSI Target values */
8302/****************************************************************************/
8303
8304 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8305 desc = "Target: Priority IO";
8306 break;
8307
8308 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8309 desc = "Target: Invalid Port";
8310 break;
8311
8312 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8313 desc = "Target Invalid IO Index:";
8314 break;
8315
8316 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8317 desc = "Target: Aborted";
8318 break;
8319
8320 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8321 desc = "Target: No Conn Retryable";
8322 break;
8323
8324 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8325 desc = "Target: No Connection";
8326 break;
8327
8328 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8329 desc = "Target: Transfer Count Mismatch";
8330 break;
8331
8332 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8333 desc = "Target: STS Data not Sent";
8334 break;
8335
8336 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8337 desc = "Target: Data Offset Error";
8338 break;
8339
8340 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8341 desc = "Target: Too Much Write Data";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8345 desc = "Target: IU Too Short";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8349 desc = "Target: ACK NAK Timeout";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8353 desc = "Target: Nak Received";
8354 break;
8355
8356/****************************************************************************/
8357/* Fibre Channel Direct Access values */
8358/****************************************************************************/
8359
8360 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8361 desc = "FC: Aborted";
8362 break;
8363
8364 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8365 desc = "FC: RX ID Invalid";
8366 break;
8367
8368 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8369 desc = "FC: DID Invalid";
8370 break;
8371
8372 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8373 desc = "FC: Node Logged Out";
8374 break;
8375
8376 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8377 desc = "FC: Exchange Canceled";
8378 break;
8379
8380/****************************************************************************/
8381/* LAN values */
8382/****************************************************************************/
8383
8384 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8385 desc = "LAN: Device not Found";
8386 break;
8387
8388 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8389 desc = "LAN: Device Failure";
8390 break;
8391
8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8393 desc = "LAN: Transmit Error";
8394 break;
8395
8396 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8397 desc = "LAN: Transmit Aborted";
8398 break;
8399
8400 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8401 desc = "LAN: Receive Error";
8402 break;
8403
8404 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8405 desc = "LAN: Receive Aborted";
8406 break;
8407
8408 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8409 desc = "LAN: Partial Packet";
8410 break;
8411
8412 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8413 desc = "LAN: Canceled";
8414 break;
8415
8416/****************************************************************************/
8417/* Serial Attached SCSI values */
8418/****************************************************************************/
8419
8420 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8421 desc = "SAS: SMP Request Failed";
8422 break;
8423
8424 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8425 desc = "SAS: SMP Data Overrun";
8426 break;
8427
8428 default:
8429 desc = "Others";
8430 break;
8431 }
8432
8433 if (!desc)
8434 return;
8435
8436 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8437 ioc->name, status, desc));
8438}
8439
8440/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8441EXPORT_SYMBOL(mpt_attach);
8442EXPORT_SYMBOL(mpt_detach);
8443#ifdef CONFIG_PM
8444EXPORT_SYMBOL(mpt_resume);
8445EXPORT_SYMBOL(mpt_suspend);
8446#endif
8447EXPORT_SYMBOL(ioc_list);
8448EXPORT_SYMBOL(mpt_register);
8449EXPORT_SYMBOL(mpt_deregister);
8450EXPORT_SYMBOL(mpt_event_register);
8451EXPORT_SYMBOL(mpt_event_deregister);
8452EXPORT_SYMBOL(mpt_reset_register);
8453EXPORT_SYMBOL(mpt_reset_deregister);
8454EXPORT_SYMBOL(mpt_device_driver_register);
8455EXPORT_SYMBOL(mpt_device_driver_deregister);
8456EXPORT_SYMBOL(mpt_get_msg_frame);
8457EXPORT_SYMBOL(mpt_put_msg_frame);
8458EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8459EXPORT_SYMBOL(mpt_free_msg_frame);
8460EXPORT_SYMBOL(mpt_send_handshake_request);
8461EXPORT_SYMBOL(mpt_verify_adapter);
8462EXPORT_SYMBOL(mpt_GetIocState);
8463EXPORT_SYMBOL(mpt_print_ioc_summary);
8464EXPORT_SYMBOL(mpt_HardResetHandler);
8465EXPORT_SYMBOL(mpt_config);
8466EXPORT_SYMBOL(mpt_findImVolumes);
8467EXPORT_SYMBOL(mpt_alloc_fw_memory);
8468EXPORT_SYMBOL(mpt_free_fw_memory);
8469EXPORT_SYMBOL(mptbase_sas_persist_operation);
8470EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8471
8472/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8473/**
8474 * fusion_init - Fusion MPT base driver initialization routine.
8475 *
8476 * Returns 0 for success, non-zero for failure.
8477 */
8478static int __init
8479fusion_init(void)
8480{
8481 u8 cb_idx;
8482
8483 show_mptmod_ver(my_NAME, my_VERSION);
8484 printk(KERN_INFO COPYRIGHT "\n");
8485
8486 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8487 MptCallbacks[cb_idx] = NULL;
8488 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8489 MptEvHandlers[cb_idx] = NULL;
8490 MptResetHandlers[cb_idx] = NULL;
8491 }
8492
8493 /* Register ourselves (mptbase) in order to facilitate
8494 * EventNotification handling.
8495 */
8496 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8497 "mptbase_reply");
8498
8499 /* Register for hard reset handling callbacks.
8500 */
8501 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8502
8503#ifdef CONFIG_PROC_FS
8504 (void) procmpt_create();
8505#endif
8506 return 0;
8507}
8508
8509/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8510/**
8511 * fusion_exit - Perform driver unload cleanup.
8512 *
8513 * This routine frees all resources associated with each MPT adapter
8514 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8515 */
8516static void __exit
8517fusion_exit(void)
8518{
8519
8520 mpt_reset_deregister(mpt_base_index);
8521
8522#ifdef CONFIG_PROC_FS
8523 procmpt_destroy();
8524#endif
8525}
8526
8527module_init(fusion_init);
8528module_exit(fusion_exit);