Loading...
1/*
2 * Copyright 2003 Digi International (www.digi.com)
3 * Scott H Kilau <Scott_Kilau at digi dot com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2, or (at your option)
8 * any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
12 * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
13 * PURPOSE. See the GNU General Public License for more details.
14 *
15 * NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE!
16 *
17 * This is shared code between Digi's CVS archive and the
18 * Linux Kernel sources.
19 * Changing the source just for reformatting needlessly breaks
20 * our CVS diff history.
21 *
22 * Send any bug fixes/changes to: Eng.Linux at digi dot com.
23 * Thank you.
24 *
25 */
26
27#include <linux/delay.h> /* For udelay */
28#include <linux/io.h> /* For read[bwl]/write[bwl] */
29#include <linux/serial.h> /* For struct async_serial */
30#include <linux/serial_reg.h> /* For the various UART offsets */
31#include <linux/pci.h>
32#include <linux/tty.h>
33
34#include "jsm.h" /* Driver main header file */
35
36static struct {
37 unsigned int rate;
38 unsigned int cflag;
39} baud_rates[] = {
40 { 921600, B921600 },
41 { 460800, B460800 },
42 { 230400, B230400 },
43 { 115200, B115200 },
44 { 57600, B57600 },
45 { 38400, B38400 },
46 { 19200, B19200 },
47 { 9600, B9600 },
48 { 4800, B4800 },
49 { 2400, B2400 },
50 { 1200, B1200 },
51 { 600, B600 },
52 { 300, B300 },
53 { 200, B200 },
54 { 150, B150 },
55 { 134, B134 },
56 { 110, B110 },
57 { 75, B75 },
58 { 50, B50 },
59};
60
61static void cls_set_cts_flow_control(struct jsm_channel *ch)
62{
63 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
64 u8 ier = readb(&ch->ch_cls_uart->ier);
65 u8 isr_fcr = 0;
66
67 /*
68 * The Enhanced Register Set may only be accessed when
69 * the Line Control Register is set to 0xBFh.
70 */
71 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
72
73 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
74
75 /* Turn on CTS flow control, turn off IXON flow control */
76 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_CTSDSR);
77 isr_fcr &= ~(UART_EXAR654_EFR_IXON);
78
79 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
80
81 /* Write old LCR value back out, which turns enhanced access off */
82 writeb(lcrb, &ch->ch_cls_uart->lcr);
83
84 /*
85 * Enable interrupts for CTS flow, turn off interrupts for
86 * received XOFF chars
87 */
88 ier |= (UART_EXAR654_IER_CTSDSR);
89 ier &= ~(UART_EXAR654_IER_XOFF);
90 writeb(ier, &ch->ch_cls_uart->ier);
91
92 /* Set the usual FIFO values */
93 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
94
95 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 |
96 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
97 &ch->ch_cls_uart->isr_fcr);
98
99 ch->ch_t_tlevel = 16;
100}
101
102static void cls_set_ixon_flow_control(struct jsm_channel *ch)
103{
104 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
105 u8 ier = readb(&ch->ch_cls_uart->ier);
106 u8 isr_fcr = 0;
107
108 /*
109 * The Enhanced Register Set may only be accessed when
110 * the Line Control Register is set to 0xBFh.
111 */
112 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
113
114 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
115
116 /* Turn on IXON flow control, turn off CTS flow control */
117 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXON);
118 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR);
119
120 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
121
122 /* Now set our current start/stop chars while in enhanced mode */
123 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr);
124 writeb(0, &ch->ch_cls_uart->lsr);
125 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr);
126 writeb(0, &ch->ch_cls_uart->spr);
127
128 /* Write old LCR value back out, which turns enhanced access off */
129 writeb(lcrb, &ch->ch_cls_uart->lcr);
130
131 /*
132 * Disable interrupts for CTS flow, turn on interrupts for
133 * received XOFF chars
134 */
135 ier &= ~(UART_EXAR654_IER_CTSDSR);
136 ier |= (UART_EXAR654_IER_XOFF);
137 writeb(ier, &ch->ch_cls_uart->ier);
138
139 /* Set the usual FIFO values */
140 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
141
142 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
143 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
144 &ch->ch_cls_uart->isr_fcr);
145}
146
147static void cls_set_no_output_flow_control(struct jsm_channel *ch)
148{
149 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
150 u8 ier = readb(&ch->ch_cls_uart->ier);
151 u8 isr_fcr = 0;
152
153 /*
154 * The Enhanced Register Set may only be accessed when
155 * the Line Control Register is set to 0xBFh.
156 */
157 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
158
159 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
160
161 /* Turn off IXON flow control, turn off CTS flow control */
162 isr_fcr |= (UART_EXAR654_EFR_ECB);
163 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR | UART_EXAR654_EFR_IXON);
164
165 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
166
167 /* Write old LCR value back out, which turns enhanced access off */
168 writeb(lcrb, &ch->ch_cls_uart->lcr);
169
170 /*
171 * Disable interrupts for CTS flow, turn off interrupts for
172 * received XOFF chars
173 */
174 ier &= ~(UART_EXAR654_IER_CTSDSR);
175 ier &= ~(UART_EXAR654_IER_XOFF);
176 writeb(ier, &ch->ch_cls_uart->ier);
177
178 /* Set the usual FIFO values */
179 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
180
181 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
182 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
183 &ch->ch_cls_uart->isr_fcr);
184
185 ch->ch_r_watermark = 0;
186 ch->ch_t_tlevel = 16;
187 ch->ch_r_tlevel = 16;
188}
189
190static void cls_set_rts_flow_control(struct jsm_channel *ch)
191{
192 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
193 u8 ier = readb(&ch->ch_cls_uart->ier);
194 u8 isr_fcr = 0;
195
196 /*
197 * The Enhanced Register Set may only be accessed when
198 * the Line Control Register is set to 0xBFh.
199 */
200 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
201
202 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
203
204 /* Turn on RTS flow control, turn off IXOFF flow control */
205 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_RTSDTR);
206 isr_fcr &= ~(UART_EXAR654_EFR_IXOFF);
207
208 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
209
210 /* Write old LCR value back out, which turns enhanced access off */
211 writeb(lcrb, &ch->ch_cls_uart->lcr);
212
213 /* Enable interrupts for RTS flow */
214 ier |= (UART_EXAR654_IER_RTSDTR);
215 writeb(ier, &ch->ch_cls_uart->ier);
216
217 /* Set the usual FIFO values */
218 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
219
220 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 |
221 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
222 &ch->ch_cls_uart->isr_fcr);
223
224 ch->ch_r_watermark = 4;
225 ch->ch_r_tlevel = 8;
226}
227
228static void cls_set_ixoff_flow_control(struct jsm_channel *ch)
229{
230 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
231 u8 ier = readb(&ch->ch_cls_uart->ier);
232 u8 isr_fcr = 0;
233
234 /*
235 * The Enhanced Register Set may only be accessed when
236 * the Line Control Register is set to 0xBFh.
237 */
238 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
239
240 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
241
242 /* Turn on IXOFF flow control, turn off RTS flow control */
243 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXOFF);
244 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR);
245
246 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
247
248 /* Now set our current start/stop chars while in enhanced mode */
249 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr);
250 writeb(0, &ch->ch_cls_uart->lsr);
251 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr);
252 writeb(0, &ch->ch_cls_uart->spr);
253
254 /* Write old LCR value back out, which turns enhanced access off */
255 writeb(lcrb, &ch->ch_cls_uart->lcr);
256
257 /* Disable interrupts for RTS flow */
258 ier &= ~(UART_EXAR654_IER_RTSDTR);
259 writeb(ier, &ch->ch_cls_uart->ier);
260
261 /* Set the usual FIFO values */
262 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
263
264 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
265 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
266 &ch->ch_cls_uart->isr_fcr);
267}
268
269static void cls_set_no_input_flow_control(struct jsm_channel *ch)
270{
271 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
272 u8 ier = readb(&ch->ch_cls_uart->ier);
273 u8 isr_fcr = 0;
274
275 /*
276 * The Enhanced Register Set may only be accessed when
277 * the Line Control Register is set to 0xBFh.
278 */
279 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
280
281 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
282
283 /* Turn off IXOFF flow control, turn off RTS flow control */
284 isr_fcr |= (UART_EXAR654_EFR_ECB);
285 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR | UART_EXAR654_EFR_IXOFF);
286
287 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
288
289 /* Write old LCR value back out, which turns enhanced access off */
290 writeb(lcrb, &ch->ch_cls_uart->lcr);
291
292 /* Disable interrupts for RTS flow */
293 ier &= ~(UART_EXAR654_IER_RTSDTR);
294 writeb(ier, &ch->ch_cls_uart->ier);
295
296 /* Set the usual FIFO values */
297 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
298
299 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
300 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
301 &ch->ch_cls_uart->isr_fcr);
302
303 ch->ch_t_tlevel = 16;
304 ch->ch_r_tlevel = 16;
305}
306
307/*
308 * cls_clear_break.
309 * Determines whether its time to shut off break condition.
310 *
311 * No locks are assumed to be held when calling this function.
312 * channel lock is held and released in this function.
313 */
314static void cls_clear_break(struct jsm_channel *ch)
315{
316 unsigned long lock_flags;
317
318 spin_lock_irqsave(&ch->ch_lock, lock_flags);
319
320 /* Turn break off, and unset some variables */
321 if (ch->ch_flags & CH_BREAK_SENDING) {
322 u8 temp = readb(&ch->ch_cls_uart->lcr);
323
324 writeb((temp & ~UART_LCR_SBC), &ch->ch_cls_uart->lcr);
325
326 ch->ch_flags &= ~(CH_BREAK_SENDING);
327 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
328 "clear break Finishing UART_LCR_SBC! finished: %lx\n",
329 jiffies);
330 }
331 spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
332}
333
334static void cls_disable_receiver(struct jsm_channel *ch)
335{
336 u8 tmp = readb(&ch->ch_cls_uart->ier);
337
338 tmp &= ~(UART_IER_RDI);
339 writeb(tmp, &ch->ch_cls_uart->ier);
340}
341
342static void cls_enable_receiver(struct jsm_channel *ch)
343{
344 u8 tmp = readb(&ch->ch_cls_uart->ier);
345
346 tmp |= (UART_IER_RDI);
347 writeb(tmp, &ch->ch_cls_uart->ier);
348}
349
350/* Make the UART raise any of the output signals we want up */
351static void cls_assert_modem_signals(struct jsm_channel *ch)
352{
353 if (!ch)
354 return;
355
356 writeb(ch->ch_mostat, &ch->ch_cls_uart->mcr);
357}
358
359static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch)
360{
361 int qleft = 0;
362 u8 linestatus = 0;
363 u8 error_mask = 0;
364 u16 head;
365 u16 tail;
366 unsigned long flags;
367
368 if (!ch)
369 return;
370
371 spin_lock_irqsave(&ch->ch_lock, flags);
372
373 /* cache head and tail of queue */
374 head = ch->ch_r_head & RQUEUEMASK;
375 tail = ch->ch_r_tail & RQUEUEMASK;
376
377 /* Get our cached LSR */
378 linestatus = ch->ch_cached_lsr;
379 ch->ch_cached_lsr = 0;
380
381 /* Store how much space we have left in the queue */
382 qleft = tail - head - 1;
383 if (qleft < 0)
384 qleft += RQUEUEMASK + 1;
385
386 /*
387 * Create a mask to determine whether we should
388 * insert the character (if any) into our queue.
389 */
390 if (ch->ch_c_iflag & IGNBRK)
391 error_mask |= UART_LSR_BI;
392
393 while (1) {
394 /*
395 * Grab the linestatus register, we need to
396 * check to see if there is any data to read
397 */
398 linestatus = readb(&ch->ch_cls_uart->lsr);
399
400 /* Break out if there is no data to fetch */
401 if (!(linestatus & UART_LSR_DR))
402 break;
403
404 /*
405 * Discard character if we are ignoring the error mask
406 * which in this case is the break signal.
407 */
408 if (linestatus & error_mask) {
409 u8 discard;
410
411 linestatus = 0;
412 discard = readb(&ch->ch_cls_uart->txrx);
413 continue;
414 }
415
416 /*
417 * If our queue is full, we have no choice but to drop some
418 * data. The assumption is that HWFLOW or SWFLOW should have
419 * stopped things way way before we got to this point.
420 *
421 * I decided that I wanted to ditch the oldest data first,
422 * I hope thats okay with everyone? Yes? Good.
423 */
424 while (qleft < 1) {
425 tail = (tail + 1) & RQUEUEMASK;
426 ch->ch_r_tail = tail;
427 ch->ch_err_overrun++;
428 qleft++;
429 }
430
431 ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE
432 | UART_LSR_FE);
433 ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx);
434
435 qleft--;
436
437 if (ch->ch_equeue[head] & UART_LSR_PE)
438 ch->ch_err_parity++;
439 if (ch->ch_equeue[head] & UART_LSR_BI)
440 ch->ch_err_break++;
441 if (ch->ch_equeue[head] & UART_LSR_FE)
442 ch->ch_err_frame++;
443
444 /* Add to, and flip head if needed */
445 head = (head + 1) & RQUEUEMASK;
446 ch->ch_rxcount++;
447 }
448
449 /*
450 * Write new final heads to channel structure.
451 */
452 ch->ch_r_head = head & RQUEUEMASK;
453 ch->ch_e_head = head & EQUEUEMASK;
454
455 spin_unlock_irqrestore(&ch->ch_lock, flags);
456}
457
458static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch)
459{
460 u16 tail;
461 int n;
462 int qlen;
463 u32 len_written = 0;
464 struct circ_buf *circ;
465
466 if (!ch)
467 return;
468
469 circ = &ch->uart_port.state->xmit;
470
471 /* No data to write to the UART */
472 if (uart_circ_empty(circ))
473 return;
474
475 /* If port is "stopped", don't send any data to the UART */
476 if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING))
477 return;
478
479 /* We have to do it this way, because of the EXAR TXFIFO count bug. */
480 if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
481 return;
482
483 n = 32;
484
485 /* cache tail of queue */
486 tail = circ->tail & (UART_XMIT_SIZE - 1);
487 qlen = uart_circ_chars_pending(circ);
488
489 /* Find minimum of the FIFO space, versus queue length */
490 n = min(n, qlen);
491
492 while (n > 0) {
493 writeb(circ->buf[tail], &ch->ch_cls_uart->txrx);
494 tail = (tail + 1) & (UART_XMIT_SIZE - 1);
495 n--;
496 ch->ch_txcount++;
497 len_written++;
498 }
499
500 /* Update the final tail */
501 circ->tail = tail & (UART_XMIT_SIZE - 1);
502
503 if (len_written > ch->ch_t_tlevel)
504 ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
505
506 if (uart_circ_empty(circ))
507 uart_write_wakeup(&ch->uart_port);
508}
509
510static void cls_parse_modem(struct jsm_channel *ch, u8 signals)
511{
512 u8 msignals = signals;
513
514 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
515 "neo_parse_modem: port: %d msignals: %x\n",
516 ch->ch_portnum, msignals);
517
518 /*
519 * Scrub off lower bits.
520 * They signify delta's, which I don't care about
521 * Keep DDCD and DDSR though
522 */
523 msignals &= 0xf8;
524
525 if (msignals & UART_MSR_DDCD)
526 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD);
527 if (msignals & UART_MSR_DDSR)
528 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_CTS);
529
530 if (msignals & UART_MSR_DCD)
531 ch->ch_mistat |= UART_MSR_DCD;
532 else
533 ch->ch_mistat &= ~UART_MSR_DCD;
534
535 if (msignals & UART_MSR_DSR)
536 ch->ch_mistat |= UART_MSR_DSR;
537 else
538 ch->ch_mistat &= ~UART_MSR_DSR;
539
540 if (msignals & UART_MSR_RI)
541 ch->ch_mistat |= UART_MSR_RI;
542 else
543 ch->ch_mistat &= ~UART_MSR_RI;
544
545 if (msignals & UART_MSR_CTS)
546 ch->ch_mistat |= UART_MSR_CTS;
547 else
548 ch->ch_mistat &= ~UART_MSR_CTS;
549
550 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
551 "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
552 ch->ch_portnum,
553 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
554 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
555 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS),
556 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR),
557 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI),
558 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD));
559}
560
561/* Parse the ISR register for the specific port */
562static inline void cls_parse_isr(struct jsm_board *brd, uint port)
563{
564 struct jsm_channel *ch;
565 u8 isr = 0;
566 unsigned long flags;
567
568 /*
569 * No need to verify board pointer, it was already
570 * verified in the interrupt routine.
571 */
572
573 if (port >= brd->nasync)
574 return;
575
576 ch = brd->channels[port];
577 if (!ch)
578 return;
579
580 /* Here we try to figure out what caused the interrupt to happen */
581 while (1) {
582 isr = readb(&ch->ch_cls_uart->isr_fcr);
583
584 /* Bail if no pending interrupt on port */
585 if (isr & UART_IIR_NO_INT)
586 break;
587
588 /* Receive Interrupt pending */
589 if (isr & (UART_IIR_RDI | UART_IIR_RDI_TIMEOUT)) {
590 /* Read data from uart -> queue */
591 cls_copy_data_from_uart_to_queue(ch);
592 jsm_check_queue_flow_control(ch);
593 }
594
595 /* Transmit Hold register empty pending */
596 if (isr & UART_IIR_THRI) {
597 /* Transfer data (if any) from Write Queue -> UART. */
598 spin_lock_irqsave(&ch->ch_lock, flags);
599 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
600 spin_unlock_irqrestore(&ch->ch_lock, flags);
601 cls_copy_data_from_queue_to_uart(ch);
602 }
603
604 /*
605 * CTS/RTS change of state:
606 * Don't need to do anything, the cls_parse_modem
607 * below will grab the updated modem signals.
608 */
609
610 /* Parse any modem signal changes */
611 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr));
612 }
613}
614
615/* Channel lock MUST be held before calling this function! */
616static void cls_flush_uart_write(struct jsm_channel *ch)
617{
618 u8 tmp = 0;
619 u8 i = 0;
620
621 if (!ch)
622 return;
623
624 writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
625 &ch->ch_cls_uart->isr_fcr);
626
627 for (i = 0; i < 10; i++) {
628 /* Check to see if the UART feels it completely flushed FIFO */
629 tmp = readb(&ch->ch_cls_uart->isr_fcr);
630 if (tmp & UART_FCR_CLEAR_XMIT) {
631 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
632 "Still flushing TX UART... i: %d\n", i);
633 udelay(10);
634 } else
635 break;
636 }
637
638 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
639}
640
641/* Channel lock MUST be held before calling this function! */
642static void cls_flush_uart_read(struct jsm_channel *ch)
643{
644 if (!ch)
645 return;
646
647 /*
648 * For complete POSIX compatibility, we should be purging the
649 * read FIFO in the UART here.
650 *
651 * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also
652 * incorrectly flushes write data as well as just basically trashing the
653 * FIFO.
654 *
655 * Presumably, this is a bug in this UART.
656 */
657
658 udelay(10);
659}
660
661static void cls_send_start_character(struct jsm_channel *ch)
662{
663 if (!ch)
664 return;
665
666 if (ch->ch_startc != __DISABLED_CHAR) {
667 ch->ch_xon_sends++;
668 writeb(ch->ch_startc, &ch->ch_cls_uart->txrx);
669 }
670}
671
672static void cls_send_stop_character(struct jsm_channel *ch)
673{
674 if (!ch)
675 return;
676
677 if (ch->ch_stopc != __DISABLED_CHAR) {
678 ch->ch_xoff_sends++;
679 writeb(ch->ch_stopc, &ch->ch_cls_uart->txrx);
680 }
681}
682
683/*
684 * cls_param()
685 * Send any/all changes to the line to the UART.
686 */
687static void cls_param(struct jsm_channel *ch)
688{
689 u8 lcr = 0;
690 u8 uart_lcr = 0;
691 u8 ier = 0;
692 u32 baud = 9600;
693 int quot = 0;
694 struct jsm_board *bd;
695 int i;
696 unsigned int cflag;
697
698 bd = ch->ch_bd;
699 if (!bd)
700 return;
701
702 /*
703 * If baud rate is zero, flush queues, and set mval to drop DTR.
704 */
705 if ((ch->ch_c_cflag & (CBAUD)) == 0) {
706 ch->ch_r_head = 0;
707 ch->ch_r_tail = 0;
708 ch->ch_e_head = 0;
709 ch->ch_e_tail = 0;
710
711 cls_flush_uart_write(ch);
712 cls_flush_uart_read(ch);
713
714 /* The baudrate is B0 so all modem lines are to be dropped. */
715 ch->ch_flags |= (CH_BAUD0);
716 ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
717 cls_assert_modem_signals(ch);
718 return;
719 }
720
721 cflag = C_BAUD(ch->uart_port.state->port.tty);
722 baud = 9600;
723 for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
724 if (baud_rates[i].cflag == cflag) {
725 baud = baud_rates[i].rate;
726 break;
727 }
728 }
729
730 if (ch->ch_flags & CH_BAUD0)
731 ch->ch_flags &= ~(CH_BAUD0);
732
733 if (ch->ch_c_cflag & PARENB)
734 lcr |= UART_LCR_PARITY;
735
736 if (!(ch->ch_c_cflag & PARODD))
737 lcr |= UART_LCR_EPAR;
738
739 /*
740 * Not all platforms support mark/space parity,
741 * so this will hide behind an ifdef.
742 */
743#ifdef CMSPAR
744 if (ch->ch_c_cflag & CMSPAR)
745 lcr |= UART_LCR_SPAR;
746#endif
747
748 if (ch->ch_c_cflag & CSTOPB)
749 lcr |= UART_LCR_STOP;
750
751 switch (ch->ch_c_cflag & CSIZE) {
752 case CS5:
753 lcr |= UART_LCR_WLEN5;
754 break;
755 case CS6:
756 lcr |= UART_LCR_WLEN6;
757 break;
758 case CS7:
759 lcr |= UART_LCR_WLEN7;
760 break;
761 case CS8:
762 default:
763 lcr |= UART_LCR_WLEN8;
764 break;
765 }
766
767 ier = readb(&ch->ch_cls_uart->ier);
768 uart_lcr = readb(&ch->ch_cls_uart->lcr);
769
770 quot = ch->ch_bd->bd_dividend / baud;
771
772 if (quot != 0) {
773 writeb(UART_LCR_DLAB, &ch->ch_cls_uart->lcr);
774 writeb((quot & 0xff), &ch->ch_cls_uart->txrx);
775 writeb((quot >> 8), &ch->ch_cls_uart->ier);
776 writeb(lcr, &ch->ch_cls_uart->lcr);
777 }
778
779 if (uart_lcr != lcr)
780 writeb(lcr, &ch->ch_cls_uart->lcr);
781
782 if (ch->ch_c_cflag & CREAD)
783 ier |= (UART_IER_RDI | UART_IER_RLSI);
784
785 ier |= (UART_IER_THRI | UART_IER_MSI);
786
787 writeb(ier, &ch->ch_cls_uart->ier);
788
789 if (ch->ch_c_cflag & CRTSCTS)
790 cls_set_cts_flow_control(ch);
791 else if (ch->ch_c_iflag & IXON) {
792 /*
793 * If start/stop is set to disable,
794 * then we should disable flow control.
795 */
796 if ((ch->ch_startc == __DISABLED_CHAR) ||
797 (ch->ch_stopc == __DISABLED_CHAR))
798 cls_set_no_output_flow_control(ch);
799 else
800 cls_set_ixon_flow_control(ch);
801 } else
802 cls_set_no_output_flow_control(ch);
803
804 if (ch->ch_c_cflag & CRTSCTS)
805 cls_set_rts_flow_control(ch);
806 else if (ch->ch_c_iflag & IXOFF) {
807 /*
808 * If start/stop is set to disable,
809 * then we should disable flow control.
810 */
811 if ((ch->ch_startc == __DISABLED_CHAR) ||
812 (ch->ch_stopc == __DISABLED_CHAR))
813 cls_set_no_input_flow_control(ch);
814 else
815 cls_set_ixoff_flow_control(ch);
816 } else
817 cls_set_no_input_flow_control(ch);
818
819 cls_assert_modem_signals(ch);
820
821 /* get current status of the modem signals now */
822 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr));
823}
824
825/*
826 * cls_intr()
827 *
828 * Classic specific interrupt handler.
829 */
830static irqreturn_t cls_intr(int irq, void *voidbrd)
831{
832 struct jsm_board *brd = voidbrd;
833 unsigned long lock_flags;
834 unsigned char uart_poll;
835 uint i = 0;
836
837 /* Lock out the slow poller from running on this board. */
838 spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
839
840 /*
841 * Check the board's global interrupt offset to see if we
842 * acctually do have an interrupt pending on us.
843 */
844 uart_poll = readb(brd->re_map_membase + UART_CLASSIC_POLL_ADDR_OFFSET);
845
846 jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n",
847 __FILE__, __LINE__, uart_poll);
848
849 if (!uart_poll) {
850 jsm_dbg(INTR, &brd->pci_dev,
851 "Kernel interrupted to me, but no pending interrupts...\n");
852 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
853 return IRQ_NONE;
854 }
855
856 /* At this point, we have at least SOMETHING to service, dig further. */
857
858 /* Parse each port to find out what caused the interrupt */
859 for (i = 0; i < brd->nasync; i++)
860 cls_parse_isr(brd, i);
861
862 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
863
864 return IRQ_HANDLED;
865}
866
867/* Inits UART */
868static void cls_uart_init(struct jsm_channel *ch)
869{
870 unsigned char lcrb = readb(&ch->ch_cls_uart->lcr);
871 unsigned char isr_fcr = 0;
872
873 writeb(0, &ch->ch_cls_uart->ier);
874
875 /*
876 * The Enhanced Register Set may only be accessed when
877 * the Line Control Register is set to 0xBFh.
878 */
879 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
880
881 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
882
883 /* Turn on Enhanced/Extended controls */
884 isr_fcr |= (UART_EXAR654_EFR_ECB);
885
886 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
887
888 /* Write old LCR value back out, which turns enhanced access off */
889 writeb(lcrb, &ch->ch_cls_uart->lcr);
890
891 /* Clear out UART and FIFO */
892 readb(&ch->ch_cls_uart->txrx);
893
894 writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
895 &ch->ch_cls_uart->isr_fcr);
896 udelay(10);
897
898 ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
899
900 readb(&ch->ch_cls_uart->lsr);
901 readb(&ch->ch_cls_uart->msr);
902}
903
904/*
905 * Turns off UART.
906 */
907static void cls_uart_off(struct jsm_channel *ch)
908{
909 /* Stop all interrupts from accurring. */
910 writeb(0, &ch->ch_cls_uart->ier);
911}
912
913/*
914 * cls_get_uarts_bytes_left.
915 * Returns 0 is nothing left in the FIFO, returns 1 otherwise.
916 *
917 * The channel lock MUST be held by the calling function.
918 */
919static u32 cls_get_uart_bytes_left(struct jsm_channel *ch)
920{
921 u8 left = 0;
922 u8 lsr = readb(&ch->ch_cls_uart->lsr);
923
924 /* Determine whether the Transmitter is empty or not */
925 if (!(lsr & UART_LSR_TEMT))
926 left = 1;
927 else {
928 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
929 left = 0;
930 }
931
932 return left;
933}
934
935/*
936 * cls_send_break.
937 * Starts sending a break thru the UART.
938 *
939 * The channel lock MUST be held by the calling function.
940 */
941static void cls_send_break(struct jsm_channel *ch)
942{
943 /* Tell the UART to start sending the break */
944 if (!(ch->ch_flags & CH_BREAK_SENDING)) {
945 u8 temp = readb(&ch->ch_cls_uart->lcr);
946
947 writeb((temp | UART_LCR_SBC), &ch->ch_cls_uart->lcr);
948 ch->ch_flags |= (CH_BREAK_SENDING);
949 }
950}
951
952/*
953 * cls_send_immediate_char.
954 * Sends a specific character as soon as possible to the UART,
955 * jumping over any bytes that might be in the write queue.
956 *
957 * The channel lock MUST be held by the calling function.
958 */
959static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c)
960{
961 writeb(c, &ch->ch_cls_uart->txrx);
962}
963
964struct board_ops jsm_cls_ops = {
965 .intr = cls_intr,
966 .uart_init = cls_uart_init,
967 .uart_off = cls_uart_off,
968 .param = cls_param,
969 .assert_modem_signals = cls_assert_modem_signals,
970 .flush_uart_write = cls_flush_uart_write,
971 .flush_uart_read = cls_flush_uart_read,
972 .disable_receiver = cls_disable_receiver,
973 .enable_receiver = cls_enable_receiver,
974 .send_break = cls_send_break,
975 .clear_break = cls_clear_break,
976 .send_start_character = cls_send_start_character,
977 .send_stop_character = cls_send_stop_character,
978 .copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart,
979 .get_uart_bytes_left = cls_get_uart_bytes_left,
980 .send_immediate_char = cls_send_immediate_char
981};
982
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2003 Digi International (www.digi.com)
4 * Scott H Kilau <Scott_Kilau at digi dot com>
5 *
6 * NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE!
7 *
8 * This is shared code between Digi's CVS archive and the
9 * Linux Kernel sources.
10 * Changing the source just for reformatting needlessly breaks
11 * our CVS diff history.
12 *
13 * Send any bug fixes/changes to: Eng.Linux at digi dot com.
14 * Thank you.
15 *
16 */
17
18#include <linux/delay.h> /* For udelay */
19#include <linux/io.h> /* For read[bwl]/write[bwl] */
20#include <linux/serial.h> /* For struct async_serial */
21#include <linux/serial_reg.h> /* For the various UART offsets */
22#include <linux/pci.h>
23#include <linux/tty.h>
24
25#include "jsm.h" /* Driver main header file */
26
27static struct {
28 unsigned int rate;
29 unsigned int cflag;
30} baud_rates[] = {
31 { 921600, B921600 },
32 { 460800, B460800 },
33 { 230400, B230400 },
34 { 115200, B115200 },
35 { 57600, B57600 },
36 { 38400, B38400 },
37 { 19200, B19200 },
38 { 9600, B9600 },
39 { 4800, B4800 },
40 { 2400, B2400 },
41 { 1200, B1200 },
42 { 600, B600 },
43 { 300, B300 },
44 { 200, B200 },
45 { 150, B150 },
46 { 134, B134 },
47 { 110, B110 },
48 { 75, B75 },
49 { 50, B50 },
50};
51
52static void cls_set_cts_flow_control(struct jsm_channel *ch)
53{
54 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
55 u8 ier = readb(&ch->ch_cls_uart->ier);
56 u8 isr_fcr = 0;
57
58 /*
59 * The Enhanced Register Set may only be accessed when
60 * the Line Control Register is set to 0xBFh.
61 */
62 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
63
64 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
65
66 /* Turn on CTS flow control, turn off IXON flow control */
67 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_CTSDSR);
68 isr_fcr &= ~(UART_EXAR654_EFR_IXON);
69
70 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
71
72 /* Write old LCR value back out, which turns enhanced access off */
73 writeb(lcrb, &ch->ch_cls_uart->lcr);
74
75 /*
76 * Enable interrupts for CTS flow, turn off interrupts for
77 * received XOFF chars
78 */
79 ier |= (UART_EXAR654_IER_CTSDSR);
80 ier &= ~(UART_EXAR654_IER_XOFF);
81 writeb(ier, &ch->ch_cls_uart->ier);
82
83 /* Set the usual FIFO values */
84 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
85
86 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 |
87 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
88 &ch->ch_cls_uart->isr_fcr);
89
90 ch->ch_t_tlevel = 16;
91}
92
93static void cls_set_ixon_flow_control(struct jsm_channel *ch)
94{
95 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
96 u8 ier = readb(&ch->ch_cls_uart->ier);
97 u8 isr_fcr = 0;
98
99 /*
100 * The Enhanced Register Set may only be accessed when
101 * the Line Control Register is set to 0xBFh.
102 */
103 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
104
105 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
106
107 /* Turn on IXON flow control, turn off CTS flow control */
108 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXON);
109 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR);
110
111 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
112
113 /* Now set our current start/stop chars while in enhanced mode */
114 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr);
115 writeb(0, &ch->ch_cls_uart->lsr);
116 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr);
117 writeb(0, &ch->ch_cls_uart->spr);
118
119 /* Write old LCR value back out, which turns enhanced access off */
120 writeb(lcrb, &ch->ch_cls_uart->lcr);
121
122 /*
123 * Disable interrupts for CTS flow, turn on interrupts for
124 * received XOFF chars
125 */
126 ier &= ~(UART_EXAR654_IER_CTSDSR);
127 ier |= (UART_EXAR654_IER_XOFF);
128 writeb(ier, &ch->ch_cls_uart->ier);
129
130 /* Set the usual FIFO values */
131 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
132
133 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
134 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
135 &ch->ch_cls_uart->isr_fcr);
136}
137
138static void cls_set_no_output_flow_control(struct jsm_channel *ch)
139{
140 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
141 u8 ier = readb(&ch->ch_cls_uart->ier);
142 u8 isr_fcr = 0;
143
144 /*
145 * The Enhanced Register Set may only be accessed when
146 * the Line Control Register is set to 0xBFh.
147 */
148 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
149
150 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
151
152 /* Turn off IXON flow control, turn off CTS flow control */
153 isr_fcr |= (UART_EXAR654_EFR_ECB);
154 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR | UART_EXAR654_EFR_IXON);
155
156 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
157
158 /* Write old LCR value back out, which turns enhanced access off */
159 writeb(lcrb, &ch->ch_cls_uart->lcr);
160
161 /*
162 * Disable interrupts for CTS flow, turn off interrupts for
163 * received XOFF chars
164 */
165 ier &= ~(UART_EXAR654_IER_CTSDSR);
166 ier &= ~(UART_EXAR654_IER_XOFF);
167 writeb(ier, &ch->ch_cls_uart->ier);
168
169 /* Set the usual FIFO values */
170 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
171
172 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
173 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
174 &ch->ch_cls_uart->isr_fcr);
175
176 ch->ch_r_watermark = 0;
177 ch->ch_t_tlevel = 16;
178 ch->ch_r_tlevel = 16;
179}
180
181static void cls_set_rts_flow_control(struct jsm_channel *ch)
182{
183 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
184 u8 ier = readb(&ch->ch_cls_uart->ier);
185 u8 isr_fcr = 0;
186
187 /*
188 * The Enhanced Register Set may only be accessed when
189 * the Line Control Register is set to 0xBFh.
190 */
191 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
192
193 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
194
195 /* Turn on RTS flow control, turn off IXOFF flow control */
196 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_RTSDTR);
197 isr_fcr &= ~(UART_EXAR654_EFR_IXOFF);
198
199 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
200
201 /* Write old LCR value back out, which turns enhanced access off */
202 writeb(lcrb, &ch->ch_cls_uart->lcr);
203
204 /* Enable interrupts for RTS flow */
205 ier |= (UART_EXAR654_IER_RTSDTR);
206 writeb(ier, &ch->ch_cls_uart->ier);
207
208 /* Set the usual FIFO values */
209 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
210
211 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 |
212 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
213 &ch->ch_cls_uart->isr_fcr);
214
215 ch->ch_r_watermark = 4;
216 ch->ch_r_tlevel = 8;
217}
218
219static void cls_set_ixoff_flow_control(struct jsm_channel *ch)
220{
221 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
222 u8 ier = readb(&ch->ch_cls_uart->ier);
223 u8 isr_fcr = 0;
224
225 /*
226 * The Enhanced Register Set may only be accessed when
227 * the Line Control Register is set to 0xBFh.
228 */
229 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
230
231 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
232
233 /* Turn on IXOFF flow control, turn off RTS flow control */
234 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXOFF);
235 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR);
236
237 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
238
239 /* Now set our current start/stop chars while in enhanced mode */
240 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr);
241 writeb(0, &ch->ch_cls_uart->lsr);
242 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr);
243 writeb(0, &ch->ch_cls_uart->spr);
244
245 /* Write old LCR value back out, which turns enhanced access off */
246 writeb(lcrb, &ch->ch_cls_uart->lcr);
247
248 /* Disable interrupts for RTS flow */
249 ier &= ~(UART_EXAR654_IER_RTSDTR);
250 writeb(ier, &ch->ch_cls_uart->ier);
251
252 /* Set the usual FIFO values */
253 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
254
255 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
256 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
257 &ch->ch_cls_uart->isr_fcr);
258}
259
260static void cls_set_no_input_flow_control(struct jsm_channel *ch)
261{
262 u8 lcrb = readb(&ch->ch_cls_uart->lcr);
263 u8 ier = readb(&ch->ch_cls_uart->ier);
264 u8 isr_fcr = 0;
265
266 /*
267 * The Enhanced Register Set may only be accessed when
268 * the Line Control Register is set to 0xBFh.
269 */
270 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
271
272 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
273
274 /* Turn off IXOFF flow control, turn off RTS flow control */
275 isr_fcr |= (UART_EXAR654_EFR_ECB);
276 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR | UART_EXAR654_EFR_IXOFF);
277
278 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
279
280 /* Write old LCR value back out, which turns enhanced access off */
281 writeb(lcrb, &ch->ch_cls_uart->lcr);
282
283 /* Disable interrupts for RTS flow */
284 ier &= ~(UART_EXAR654_IER_RTSDTR);
285 writeb(ier, &ch->ch_cls_uart->ier);
286
287 /* Set the usual FIFO values */
288 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr);
289
290 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 |
291 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR),
292 &ch->ch_cls_uart->isr_fcr);
293
294 ch->ch_t_tlevel = 16;
295 ch->ch_r_tlevel = 16;
296}
297
298/*
299 * cls_clear_break.
300 * Determines whether its time to shut off break condition.
301 *
302 * No locks are assumed to be held when calling this function.
303 * channel lock is held and released in this function.
304 */
305static void cls_clear_break(struct jsm_channel *ch)
306{
307 unsigned long lock_flags;
308
309 spin_lock_irqsave(&ch->ch_lock, lock_flags);
310
311 /* Turn break off, and unset some variables */
312 if (ch->ch_flags & CH_BREAK_SENDING) {
313 u8 temp = readb(&ch->ch_cls_uart->lcr);
314
315 writeb((temp & ~UART_LCR_SBC), &ch->ch_cls_uart->lcr);
316
317 ch->ch_flags &= ~(CH_BREAK_SENDING);
318 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
319 "clear break Finishing UART_LCR_SBC! finished: %lx\n",
320 jiffies);
321 }
322 spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
323}
324
325static void cls_disable_receiver(struct jsm_channel *ch)
326{
327 u8 tmp = readb(&ch->ch_cls_uart->ier);
328
329 tmp &= ~(UART_IER_RDI);
330 writeb(tmp, &ch->ch_cls_uart->ier);
331}
332
333static void cls_enable_receiver(struct jsm_channel *ch)
334{
335 u8 tmp = readb(&ch->ch_cls_uart->ier);
336
337 tmp |= (UART_IER_RDI);
338 writeb(tmp, &ch->ch_cls_uart->ier);
339}
340
341/* Make the UART raise any of the output signals we want up */
342static void cls_assert_modem_signals(struct jsm_channel *ch)
343{
344 if (!ch)
345 return;
346
347 writeb(ch->ch_mostat, &ch->ch_cls_uart->mcr);
348}
349
350static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch)
351{
352 int qleft = 0;
353 u8 linestatus = 0;
354 u8 error_mask = 0;
355 u16 head;
356 u16 tail;
357 unsigned long flags;
358
359 if (!ch)
360 return;
361
362 spin_lock_irqsave(&ch->ch_lock, flags);
363
364 /* cache head and tail of queue */
365 head = ch->ch_r_head & RQUEUEMASK;
366 tail = ch->ch_r_tail & RQUEUEMASK;
367
368 /* Get our cached LSR */
369 linestatus = ch->ch_cached_lsr;
370 ch->ch_cached_lsr = 0;
371
372 /* Store how much space we have left in the queue */
373 qleft = tail - head - 1;
374 if (qleft < 0)
375 qleft += RQUEUEMASK + 1;
376
377 /*
378 * Create a mask to determine whether we should
379 * insert the character (if any) into our queue.
380 */
381 if (ch->ch_c_iflag & IGNBRK)
382 error_mask |= UART_LSR_BI;
383
384 while (1) {
385 /*
386 * Grab the linestatus register, we need to
387 * check to see if there is any data to read
388 */
389 linestatus = readb(&ch->ch_cls_uart->lsr);
390
391 /* Break out if there is no data to fetch */
392 if (!(linestatus & UART_LSR_DR))
393 break;
394
395 /*
396 * Discard character if we are ignoring the error mask
397 * which in this case is the break signal.
398 */
399 if (linestatus & error_mask) {
400 u8 discard;
401
402 linestatus = 0;
403 discard = readb(&ch->ch_cls_uart->txrx);
404 continue;
405 }
406
407 /*
408 * If our queue is full, we have no choice but to drop some
409 * data. The assumption is that HWFLOW or SWFLOW should have
410 * stopped things way way before we got to this point.
411 *
412 * I decided that I wanted to ditch the oldest data first,
413 * I hope thats okay with everyone? Yes? Good.
414 */
415 while (qleft < 1) {
416 tail = (tail + 1) & RQUEUEMASK;
417 ch->ch_r_tail = tail;
418 ch->ch_err_overrun++;
419 qleft++;
420 }
421
422 ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE
423 | UART_LSR_FE);
424 ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx);
425
426 qleft--;
427
428 if (ch->ch_equeue[head] & UART_LSR_PE)
429 ch->ch_err_parity++;
430 if (ch->ch_equeue[head] & UART_LSR_BI)
431 ch->ch_err_break++;
432 if (ch->ch_equeue[head] & UART_LSR_FE)
433 ch->ch_err_frame++;
434
435 /* Add to, and flip head if needed */
436 head = (head + 1) & RQUEUEMASK;
437 ch->ch_rxcount++;
438 }
439
440 /*
441 * Write new final heads to channel structure.
442 */
443 ch->ch_r_head = head & RQUEUEMASK;
444 ch->ch_e_head = head & EQUEUEMASK;
445
446 spin_unlock_irqrestore(&ch->ch_lock, flags);
447}
448
449static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch)
450{
451 u16 tail;
452 int n;
453 int qlen;
454 u32 len_written = 0;
455 struct circ_buf *circ;
456
457 if (!ch)
458 return;
459
460 circ = &ch->uart_port.state->xmit;
461
462 /* No data to write to the UART */
463 if (uart_circ_empty(circ))
464 return;
465
466 /* If port is "stopped", don't send any data to the UART */
467 if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING))
468 return;
469
470 /* We have to do it this way, because of the EXAR TXFIFO count bug. */
471 if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
472 return;
473
474 n = 32;
475
476 /* cache tail of queue */
477 tail = circ->tail & (UART_XMIT_SIZE - 1);
478 qlen = uart_circ_chars_pending(circ);
479
480 /* Find minimum of the FIFO space, versus queue length */
481 n = min(n, qlen);
482
483 while (n > 0) {
484 writeb(circ->buf[tail], &ch->ch_cls_uart->txrx);
485 tail = (tail + 1) & (UART_XMIT_SIZE - 1);
486 n--;
487 ch->ch_txcount++;
488 len_written++;
489 }
490
491 /* Update the final tail */
492 circ->tail = tail & (UART_XMIT_SIZE - 1);
493
494 if (len_written > ch->ch_t_tlevel)
495 ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
496
497 if (uart_circ_empty(circ))
498 uart_write_wakeup(&ch->uart_port);
499}
500
501static void cls_parse_modem(struct jsm_channel *ch, u8 signals)
502{
503 u8 msignals = signals;
504
505 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
506 "neo_parse_modem: port: %d msignals: %x\n",
507 ch->ch_portnum, msignals);
508
509 /*
510 * Scrub off lower bits.
511 * They signify delta's, which I don't care about
512 * Keep DDCD and DDSR though
513 */
514 msignals &= 0xf8;
515
516 if (msignals & UART_MSR_DDCD)
517 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD);
518 if (msignals & UART_MSR_DDSR)
519 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_CTS);
520
521 if (msignals & UART_MSR_DCD)
522 ch->ch_mistat |= UART_MSR_DCD;
523 else
524 ch->ch_mistat &= ~UART_MSR_DCD;
525
526 if (msignals & UART_MSR_DSR)
527 ch->ch_mistat |= UART_MSR_DSR;
528 else
529 ch->ch_mistat &= ~UART_MSR_DSR;
530
531 if (msignals & UART_MSR_RI)
532 ch->ch_mistat |= UART_MSR_RI;
533 else
534 ch->ch_mistat &= ~UART_MSR_RI;
535
536 if (msignals & UART_MSR_CTS)
537 ch->ch_mistat |= UART_MSR_CTS;
538 else
539 ch->ch_mistat &= ~UART_MSR_CTS;
540
541 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
542 "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
543 ch->ch_portnum,
544 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
545 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
546 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS),
547 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR),
548 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI),
549 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD));
550}
551
552/* Parse the ISR register for the specific port */
553static inline void cls_parse_isr(struct jsm_board *brd, uint port)
554{
555 struct jsm_channel *ch;
556 u8 isr = 0;
557 unsigned long flags;
558
559 /*
560 * No need to verify board pointer, it was already
561 * verified in the interrupt routine.
562 */
563
564 if (port >= brd->nasync)
565 return;
566
567 ch = brd->channels[port];
568 if (!ch)
569 return;
570
571 /* Here we try to figure out what caused the interrupt to happen */
572 while (1) {
573 isr = readb(&ch->ch_cls_uart->isr_fcr);
574
575 /* Bail if no pending interrupt on port */
576 if (isr & UART_IIR_NO_INT)
577 break;
578
579 /* Receive Interrupt pending */
580 if (isr & (UART_IIR_RDI | UART_IIR_RDI_TIMEOUT)) {
581 /* Read data from uart -> queue */
582 cls_copy_data_from_uart_to_queue(ch);
583 jsm_check_queue_flow_control(ch);
584 }
585
586 /* Transmit Hold register empty pending */
587 if (isr & UART_IIR_THRI) {
588 /* Transfer data (if any) from Write Queue -> UART. */
589 spin_lock_irqsave(&ch->ch_lock, flags);
590 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
591 spin_unlock_irqrestore(&ch->ch_lock, flags);
592 cls_copy_data_from_queue_to_uart(ch);
593 }
594
595 /*
596 * CTS/RTS change of state:
597 * Don't need to do anything, the cls_parse_modem
598 * below will grab the updated modem signals.
599 */
600
601 /* Parse any modem signal changes */
602 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr));
603 }
604}
605
606/* Channel lock MUST be held before calling this function! */
607static void cls_flush_uart_write(struct jsm_channel *ch)
608{
609 u8 tmp = 0;
610 u8 i = 0;
611
612 if (!ch)
613 return;
614
615 writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
616 &ch->ch_cls_uart->isr_fcr);
617
618 for (i = 0; i < 10; i++) {
619 /* Check to see if the UART feels it completely flushed FIFO */
620 tmp = readb(&ch->ch_cls_uart->isr_fcr);
621 if (tmp & UART_FCR_CLEAR_XMIT) {
622 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
623 "Still flushing TX UART... i: %d\n", i);
624 udelay(10);
625 } else
626 break;
627 }
628
629 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
630}
631
632/* Channel lock MUST be held before calling this function! */
633static void cls_flush_uart_read(struct jsm_channel *ch)
634{
635 if (!ch)
636 return;
637
638 /*
639 * For complete POSIX compatibility, we should be purging the
640 * read FIFO in the UART here.
641 *
642 * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also
643 * incorrectly flushes write data as well as just basically trashing the
644 * FIFO.
645 *
646 * Presumably, this is a bug in this UART.
647 */
648
649 udelay(10);
650}
651
652static void cls_send_start_character(struct jsm_channel *ch)
653{
654 if (!ch)
655 return;
656
657 if (ch->ch_startc != __DISABLED_CHAR) {
658 ch->ch_xon_sends++;
659 writeb(ch->ch_startc, &ch->ch_cls_uart->txrx);
660 }
661}
662
663static void cls_send_stop_character(struct jsm_channel *ch)
664{
665 if (!ch)
666 return;
667
668 if (ch->ch_stopc != __DISABLED_CHAR) {
669 ch->ch_xoff_sends++;
670 writeb(ch->ch_stopc, &ch->ch_cls_uart->txrx);
671 }
672}
673
674/*
675 * cls_param()
676 * Send any/all changes to the line to the UART.
677 */
678static void cls_param(struct jsm_channel *ch)
679{
680 u8 lcr = 0;
681 u8 uart_lcr = 0;
682 u8 ier = 0;
683 u32 baud = 9600;
684 int quot = 0;
685 struct jsm_board *bd;
686 int i;
687 unsigned int cflag;
688
689 bd = ch->ch_bd;
690 if (!bd)
691 return;
692
693 /*
694 * If baud rate is zero, flush queues, and set mval to drop DTR.
695 */
696 if ((ch->ch_c_cflag & (CBAUD)) == 0) {
697 ch->ch_r_head = 0;
698 ch->ch_r_tail = 0;
699 ch->ch_e_head = 0;
700 ch->ch_e_tail = 0;
701
702 cls_flush_uart_write(ch);
703 cls_flush_uart_read(ch);
704
705 /* The baudrate is B0 so all modem lines are to be dropped. */
706 ch->ch_flags |= (CH_BAUD0);
707 ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
708 cls_assert_modem_signals(ch);
709 return;
710 }
711
712 cflag = C_BAUD(ch->uart_port.state->port.tty);
713 baud = 9600;
714 for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
715 if (baud_rates[i].cflag == cflag) {
716 baud = baud_rates[i].rate;
717 break;
718 }
719 }
720
721 if (ch->ch_flags & CH_BAUD0)
722 ch->ch_flags &= ~(CH_BAUD0);
723
724 if (ch->ch_c_cflag & PARENB)
725 lcr |= UART_LCR_PARITY;
726
727 if (!(ch->ch_c_cflag & PARODD))
728 lcr |= UART_LCR_EPAR;
729
730 /*
731 * Not all platforms support mark/space parity,
732 * so this will hide behind an ifdef.
733 */
734#ifdef CMSPAR
735 if (ch->ch_c_cflag & CMSPAR)
736 lcr |= UART_LCR_SPAR;
737#endif
738
739 if (ch->ch_c_cflag & CSTOPB)
740 lcr |= UART_LCR_STOP;
741
742 switch (ch->ch_c_cflag & CSIZE) {
743 case CS5:
744 lcr |= UART_LCR_WLEN5;
745 break;
746 case CS6:
747 lcr |= UART_LCR_WLEN6;
748 break;
749 case CS7:
750 lcr |= UART_LCR_WLEN7;
751 break;
752 case CS8:
753 default:
754 lcr |= UART_LCR_WLEN8;
755 break;
756 }
757
758 ier = readb(&ch->ch_cls_uart->ier);
759 uart_lcr = readb(&ch->ch_cls_uart->lcr);
760
761 quot = ch->ch_bd->bd_dividend / baud;
762
763 if (quot != 0) {
764 writeb(UART_LCR_DLAB, &ch->ch_cls_uart->lcr);
765 writeb((quot & 0xff), &ch->ch_cls_uart->txrx);
766 writeb((quot >> 8), &ch->ch_cls_uart->ier);
767 writeb(lcr, &ch->ch_cls_uart->lcr);
768 }
769
770 if (uart_lcr != lcr)
771 writeb(lcr, &ch->ch_cls_uart->lcr);
772
773 if (ch->ch_c_cflag & CREAD)
774 ier |= (UART_IER_RDI | UART_IER_RLSI);
775
776 ier |= (UART_IER_THRI | UART_IER_MSI);
777
778 writeb(ier, &ch->ch_cls_uart->ier);
779
780 if (ch->ch_c_cflag & CRTSCTS)
781 cls_set_cts_flow_control(ch);
782 else if (ch->ch_c_iflag & IXON) {
783 /*
784 * If start/stop is set to disable,
785 * then we should disable flow control.
786 */
787 if ((ch->ch_startc == __DISABLED_CHAR) ||
788 (ch->ch_stopc == __DISABLED_CHAR))
789 cls_set_no_output_flow_control(ch);
790 else
791 cls_set_ixon_flow_control(ch);
792 } else
793 cls_set_no_output_flow_control(ch);
794
795 if (ch->ch_c_cflag & CRTSCTS)
796 cls_set_rts_flow_control(ch);
797 else if (ch->ch_c_iflag & IXOFF) {
798 /*
799 * If start/stop is set to disable,
800 * then we should disable flow control.
801 */
802 if ((ch->ch_startc == __DISABLED_CHAR) ||
803 (ch->ch_stopc == __DISABLED_CHAR))
804 cls_set_no_input_flow_control(ch);
805 else
806 cls_set_ixoff_flow_control(ch);
807 } else
808 cls_set_no_input_flow_control(ch);
809
810 cls_assert_modem_signals(ch);
811
812 /* get current status of the modem signals now */
813 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr));
814}
815
816/*
817 * cls_intr()
818 *
819 * Classic specific interrupt handler.
820 */
821static irqreturn_t cls_intr(int irq, void *voidbrd)
822{
823 struct jsm_board *brd = voidbrd;
824 unsigned long lock_flags;
825 unsigned char uart_poll;
826 uint i = 0;
827
828 /* Lock out the slow poller from running on this board. */
829 spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
830
831 /*
832 * Check the board's global interrupt offset to see if we
833 * acctually do have an interrupt pending on us.
834 */
835 uart_poll = readb(brd->re_map_membase + UART_CLASSIC_POLL_ADDR_OFFSET);
836
837 jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n",
838 __FILE__, __LINE__, uart_poll);
839
840 if (!uart_poll) {
841 jsm_dbg(INTR, &brd->pci_dev,
842 "Kernel interrupted to me, but no pending interrupts...\n");
843 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
844 return IRQ_NONE;
845 }
846
847 /* At this point, we have at least SOMETHING to service, dig further. */
848
849 /* Parse each port to find out what caused the interrupt */
850 for (i = 0; i < brd->nasync; i++)
851 cls_parse_isr(brd, i);
852
853 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
854
855 return IRQ_HANDLED;
856}
857
858/* Inits UART */
859static void cls_uart_init(struct jsm_channel *ch)
860{
861 unsigned char lcrb = readb(&ch->ch_cls_uart->lcr);
862 unsigned char isr_fcr = 0;
863
864 writeb(0, &ch->ch_cls_uart->ier);
865
866 /*
867 * The Enhanced Register Set may only be accessed when
868 * the Line Control Register is set to 0xBFh.
869 */
870 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr);
871
872 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr);
873
874 /* Turn on Enhanced/Extended controls */
875 isr_fcr |= (UART_EXAR654_EFR_ECB);
876
877 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr);
878
879 /* Write old LCR value back out, which turns enhanced access off */
880 writeb(lcrb, &ch->ch_cls_uart->lcr);
881
882 /* Clear out UART and FIFO */
883 readb(&ch->ch_cls_uart->txrx);
884
885 writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
886 &ch->ch_cls_uart->isr_fcr);
887 udelay(10);
888
889 ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
890
891 readb(&ch->ch_cls_uart->lsr);
892 readb(&ch->ch_cls_uart->msr);
893}
894
895/*
896 * Turns off UART.
897 */
898static void cls_uart_off(struct jsm_channel *ch)
899{
900 /* Stop all interrupts from accurring. */
901 writeb(0, &ch->ch_cls_uart->ier);
902}
903
904/*
905 * cls_get_uarts_bytes_left.
906 * Returns 0 is nothing left in the FIFO, returns 1 otherwise.
907 *
908 * The channel lock MUST be held by the calling function.
909 */
910static u32 cls_get_uart_bytes_left(struct jsm_channel *ch)
911{
912 u8 left = 0;
913 u8 lsr = readb(&ch->ch_cls_uart->lsr);
914
915 /* Determine whether the Transmitter is empty or not */
916 if (!(lsr & UART_LSR_TEMT))
917 left = 1;
918 else {
919 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
920 left = 0;
921 }
922
923 return left;
924}
925
926/*
927 * cls_send_break.
928 * Starts sending a break thru the UART.
929 *
930 * The channel lock MUST be held by the calling function.
931 */
932static void cls_send_break(struct jsm_channel *ch)
933{
934 /* Tell the UART to start sending the break */
935 if (!(ch->ch_flags & CH_BREAK_SENDING)) {
936 u8 temp = readb(&ch->ch_cls_uart->lcr);
937
938 writeb((temp | UART_LCR_SBC), &ch->ch_cls_uart->lcr);
939 ch->ch_flags |= (CH_BREAK_SENDING);
940 }
941}
942
943/*
944 * cls_send_immediate_char.
945 * Sends a specific character as soon as possible to the UART,
946 * jumping over any bytes that might be in the write queue.
947 *
948 * The channel lock MUST be held by the calling function.
949 */
950static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c)
951{
952 writeb(c, &ch->ch_cls_uart->txrx);
953}
954
955struct board_ops jsm_cls_ops = {
956 .intr = cls_intr,
957 .uart_init = cls_uart_init,
958 .uart_off = cls_uart_off,
959 .param = cls_param,
960 .assert_modem_signals = cls_assert_modem_signals,
961 .flush_uart_write = cls_flush_uart_write,
962 .flush_uart_read = cls_flush_uart_read,
963 .disable_receiver = cls_disable_receiver,
964 .enable_receiver = cls_enable_receiver,
965 .send_break = cls_send_break,
966 .clear_break = cls_clear_break,
967 .send_start_character = cls_send_start_character,
968 .send_stop_character = cls_send_stop_character,
969 .copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart,
970 .get_uart_bytes_left = cls_get_uart_bytes_left,
971 .send_immediate_char = cls_send_immediate_char
972};
973